linux/drivers/net/phy/microchip.c

379 lines
10 KiB
C
Raw Normal View History

/*
* Copyright (C) 2015 Microchip Technology
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/microchipphy.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <dt-bindings/net/microchip-lan78xx.h>
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
#define DRIVER_DESC "Microchip LAN88XX PHY driver"
struct lan88xx_priv {
int chip_id;
int chip_rev;
__u32 wolopts;
};
static int lan88xx_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, LAN88XX_EXT_PAGE_ACCESS);
}
static int lan88xx_write_page(struct phy_device *phydev, int page)
{
return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page);
}
static int lan88xx_phy_config_intr(struct phy_device *phydev)
{
int rc;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
/* unmask all source and clear them before enable */
rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF);
rc = phy_read(phydev, LAN88XX_INT_STS);
rc = phy_write(phydev, LAN88XX_INT_MASK,
LAN88XX_INT_MASK_MDINTPIN_EN_ |
LAN88XX_INT_MASK_LINK_CHANGE_);
} else {
rc = phy_write(phydev, LAN88XX_INT_MASK, 0);
}
return rc < 0 ? rc : 0;
}
static int lan88xx_phy_ack_interrupt(struct phy_device *phydev)
{
int rc = phy_read(phydev, LAN88XX_INT_STS);
return rc < 0 ? rc : 0;
}
static int lan88xx_suspend(struct phy_device *phydev)
{
struct lan88xx_priv *priv = phydev->priv;
/* do not power down PHY when WOL is enabled */
if (!priv->wolopts)
genphy_suspend(phydev);
return 0;
}
static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
u32 data)
{
int val, save_page, ret = 0;
u16 buf;
/* Save current page */
save_page = phy_save_page(phydev);
if (save_page < 0) {
phydev_warn(phydev, "Failed to get current page\n");
goto err;
}
/* Switch to TR page */
lan88xx_write_page(phydev, LAN88XX_EXT_PAGE_ACCESS_TR);
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
(data & 0xFFFF));
if (ret < 0) {
phydev_warn(phydev, "Failed to write TR low data\n");
goto err;
}
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
(data & 0x00FF0000) >> 16);
if (ret < 0) {
phydev_warn(phydev, "Failed to write TR high data\n");
goto err;
}
/* Config control bits [15:13] of register */
buf = (regaddr & ~(0x3 << 13));/* Clr [14:13] to write data in reg */
buf |= 0x8000; /* Set [15] to Packet transmit */
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
if (ret < 0) {
phydev_warn(phydev, "Failed to write data in reg\n");
goto err;
}
usleep_range(1000, 2000);/* Wait for Data to be written */
val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
if (!(val & 0x8000))
phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
regaddr);
err:
return phy_restore_page(phydev, save_page, ret);
}
static void lan88xx_config_TR_regs(struct phy_device *phydev)
{
int err;
/* Get access to Channel 0x1, Node 0xF , Register 0x01.
* Write 24-bit value 0x12B00A to register. Setting MrvlTrFix1000Kf,
* MrvlTrFix1000Kp, MasterEnableTR bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x06.
* Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
* SSTrKp1000Mas bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
/* Get access to Channel b'10, Node b'1111, Register 0x11.
* Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
* bits
*/
err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x10.
* Write 24-bit value 0xEEFFDD to register. Setting
* eee_TrKp1Long_1000, eee_TrKp2Long_1000, eee_TrKp3Long_1000,
* eee_TrKp1Short_1000,eee_TrKp2Short_1000, eee_TrKp3Short_1000 bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x13.
* Write 24-bit value 0x071448 to register. Setting
* slv_lpi_tr_tmr_val1, slv_lpi_tr_tmr_val2 bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x12.
* Write 24-bit value 0x13132F to register. Setting
* slv_sigdet_timer_val1, slv_sigdet_timer_val2 bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x16A4]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x14.
* Write 24-bit value 0x0 to register. Setting eee_3level_delay,
* eee_TrKf_freeze_delay bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x16A8]\n");
/* Get access to Channel b'01, Node b'1111, Register 0x34.
* Write 24-bit value 0x91B06C to register. Setting
* FastMseSearchThreshLong1000, FastMseSearchThreshShort1000,
* FastMseSearchUpdGain1000 bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n");
/* Get access to Channel b'01, Node b'1111, Register 0x3E.
* Write 24-bit value 0xC0A028 to register. Setting
* FastMseKp2ThreshLong1000, FastMseKp2ThreshShort1000,
* FastMseKp2UpdGain1000, FastMseKp2ExitEn1000 bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n");
/* Get access to Channel b'01, Node b'1111, Register 0x35.
* Write 24-bit value 0x041600 to register. Setting
* FastMseSearchPhShNum1000, FastMseSearchClksPerPh1000,
* FastMsePhChangeDelay1000 bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n");
/* Get access to Channel b'10, Node b'1101, Register 0x03.
* Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
*/
err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
if (err < 0)
phydev_warn(phydev, "Failed to Set Register[0x1686]\n");
}
static int lan88xx_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct lan88xx_priv *priv;
u32 led_modes[4];
int len;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->wolopts = 0;
len = of_property_read_variable_u32_array(dev->of_node,
"microchip,led-modes",
led_modes,
0,
ARRAY_SIZE(led_modes));
if (len >= 0) {
u32 reg = 0;
int i;
for (i = 0; i < len; i++) {
if (led_modes[i] > 15)
return -EINVAL;
reg |= led_modes[i] << (i * 4);
}
for (; i < ARRAY_SIZE(led_modes); i++)
reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
(void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
} else if (len == -EOVERFLOW) {
return -EINVAL;
}
/* these values can be used to identify internal PHY */
priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
phydev->priv = priv;
return 0;
}
static void lan88xx_remove(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct lan88xx_priv *priv = phydev->priv;
if (priv)
devm_kfree(dev, priv);
}
static int lan88xx_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
struct lan88xx_priv *priv = phydev->priv;
priv->wolopts = wol->wolopts;
return 0;
}
static void lan88xx_set_mdix(struct phy_device *phydev)
{
int buf;
int val;
switch (phydev->mdix_ctrl) {
case ETH_TP_MDI:
val = LAN88XX_EXT_MODE_CTRL_MDI_;
break;
case ETH_TP_MDI_X:
val = LAN88XX_EXT_MODE_CTRL_MDI_X_;
break;
case ETH_TP_MDI_AUTO:
val = LAN88XX_EXT_MODE_CTRL_AUTO_MDIX_;
break;
default:
return;
}
phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_1);
buf = phy_read(phydev, LAN88XX_EXT_MODE_CTRL);
buf &= ~LAN88XX_EXT_MODE_CTRL_MDIX_MASK_;
buf |= val;
phy_write(phydev, LAN88XX_EXT_MODE_CTRL, buf);
phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_0);
}
static int lan88xx_config_init(struct phy_device *phydev)
{
int val;
genphy_config_init(phydev);
/*Zerodetect delay enable */
val = phy_read_mmd(phydev, MDIO_MMD_PCS,
PHY_ARDENNES_MMD_DEV_3_PHY_CFG);
val |= PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_;
phy_write_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG,
val);
/* Config DSP registers */
lan88xx_config_TR_regs(phydev);
return 0;
}
static int lan88xx_config_aneg(struct phy_device *phydev)
{
lan88xx_set_mdix(phydev);
return genphy_config_aneg(phydev);
}
static struct phy_driver microchip_phy_driver[] = {
{
.phy_id = 0x0007c130,
.phy_id_mask = 0xfffffff0,
.name = "Microchip LAN88xx",
net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause Instead of having individual PHY drivers set the SUPPORTED_Pause and SUPPORTED_Asym_Pause flags, phylib itself should set those flags, unless there is a hardware erratum or other special case. During autonegotiation, the PHYs will determine whether to enable pause frame support. Pause frames are a feature that is supported by the MAC. It is the MAC that generates the frames and that processes them. The PHY can only be configured to allow them to pass through. This commit also effectively reverts the recently applied c7a61319 ("net: phy: dp83848: Support ethernet pause frames"). So the new process is: 1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause and SUPPORTED_AsymPause bits in phydev->supported. This indicates that the PHY supports pause frames. 2) The MAC driver checks phydev->supported before it calls phy_start(). If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver sets those bits in phydev->advertising, if it wants to enable pause frame support. 3) When the link state changes, the MAC driver checks phydev->pause and phydev->asym_pause, If the bits are set, then it enables the corresponding features in the MAC. The algorithm is: if (phydev->pause) The MAC should be programmed to receive and honor pause frames it receives, i.e. enable receive flow control. if (phydev->pause != phydev->asym_pause) The MAC should be programmed to transmit pause frames when needed, i.e. enable transmit flow control. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07 19:20:51 +00:00
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.probe = lan88xx_probe,
.remove = lan88xx_remove,
.config_init = lan88xx_config_init,
.config_aneg = lan88xx_config_aneg,
.ack_interrupt = lan88xx_phy_ack_interrupt,
.config_intr = lan88xx_phy_config_intr,
.suspend = lan88xx_suspend,
.resume = genphy_resume,
.set_wol = lan88xx_set_wol,
.read_page = lan88xx_read_page,
.write_page = lan88xx_write_page,
} };
module_phy_driver(microchip_phy_driver);
static struct mdio_device_id __maybe_unused microchip_tbl[] = {
{ 0x0007c130, 0xfffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, microchip_tbl);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");