linux/mm/memory.c

6620 lines
182 KiB
C
Raw Normal View History

userfaultfd: UFFD_FEATURE_WP_ASYNC Patch series "Implement IOCTL to get and optionally clear info about PTEs", v33. *Motivation* The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch() retrieves the addresses of the pages that are written to in a region of virtual memory. This syscall is used in Windows applications and games etc. This syscall is being emulated in pretty slow manner in userspace. Our purpose is to enhance the kernel such that we translate it efficiently in a better way. Currently some out of tree hack patches are being used to efficiently emulate it in some kernels. We intend to replace those with these patches. So the whole gaming on Linux can effectively get benefit from this. It means there would be tons of users of this code. CRIU use case [2] was mentioned by Andrei and Danylo: > Use cases for migrating sparse VMAs are binaries sanitized with ASAN, > MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of > shadow memory [4]. Being able to migrate such binaries allows to highly > reduce the amount of work needed to identify and fix post-migration > crashes, which happen constantly. Andrei defines the following uses of this code: * it is more granular and allows us to track changed pages more effectively. The current interface can clear dirty bits for the entire process only. In addition, reading info about pages is a separate operation. It means we must freeze the process to read information about all its pages, reset dirty bits, only then we can start dumping pages. The information about pages becomes more and more outdated, while we are processing pages. The new interface solves both these downsides. First, it allows us to read pte bits and clear the soft-dirty bit atomically. It means that CRIU will not need to freeze processes to pre-dump their memory. Second, it clears soft-dirty bits for a specified region of memory. It means CRIU will have actual info about pages to the moment of dumping them. * The new interface has to be much faster because basic page filtering is happening in the kernel. With the old interface, we have to read pagemap for each page. *Implementation Evolution (Short Summary)* From the definition of GetWriteWatch(), we feel like kernel's soft-dirty feature can be used under the hood with some additions like: * reset soft-dirty flag for only a specific region of memory instead of clearing the flag for the entire process * get and clear soft-dirty flag for a specific region atomically So we decided to use ioctl on pagemap file to read or/and reset soft-dirty flag. But using soft-dirty flag, sometimes we get extra pages which weren't even written. They had become soft-dirty because of VMA merging and VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were able to by-pass this short coming by ignoring VM_SOFTDIRTY until David reported that mprotect etc messes up the soft-dirty flag while ignoring VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We discussed if we can revert these patches. But we could not reach to any conclusion. So at this point, I made couple of tries to solve this whole VM_SOFTDIRTY issue by correcting the soft-dirty implementation: * [7] Correct the bug fixed wrongly back in 2014. It had potential to cause regression. We left it behind. * [8] Keep a list of soft-dirty part of a VMA across splits and merges. I got the reply don't increase the size of the VMA by 8 bytes. At this point, we left soft-dirty considering it is too much delicate and userfaultfd [9] seemed like the only way forward. From there onward, we have been basing soft-dirty emulation on userfaultfd wp feature where kernel resolves the faults itself when WP_ASYNC feature is used. It was straight forward to add WP_ASYNC feature in userfautlfd. Now we get only those pages dirty or written-to which are really written in reality. (PS There is another WP_UNPOPULATED userfautfd feature is required which is needed to avoid pre-faulting memory before write-protecting [9].) All the different masks were added on the request of CRIU devs to create interface more generic and better. [1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch [2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com [3] https://github.com/google/sanitizers [4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit [5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com [6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/ [7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com [8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com [9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com [10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com This patch (of 6): Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows userfaultfd wr-protect faults to be resolved by the kernel directly. It can be used like a high accuracy version of soft-dirty, without vma modifications during tracking, and also with ranged support by default rather than for a whole mm when reset the protections due to existence of ioctl(UFFDIO_WRITEPROTECT). Several goals of such a dirty tracking interface: 1. All types of memory should be supported and tracable. This is nature for soft-dirty but should mention when the context is userfaultfd, because it used to only support anon/shmem/hugetlb. The problem is for a dirty tracking purpose these three types may not be enough, and it's legal to track anything e.g. any page cache writes from mmap. 2. Protections can be applied to partial of a memory range, without vma split/merge fuss. The hope is that the tracking itself should not affect any vma layout change. It also helps when reset happens because the reset will not need mmap write lock which can block the tracee. 3. Accuracy needs to be maintained. This means we need pte markers to work on any type of VMA. One could question that, the whole concept of async dirty tracking is not really close to fundamentally what userfaultfd used to be: it's not "a fault to be serviced by userspace" anymore. However, using userfaultfd-wp here as a framework is convenient for us in at least: 1. VM_UFFD_WP vma flag, which has a very good name to suite something like this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new feature bit to identify from a sync version of uffd-wp registration. 2. PTE markers logic can be leveraged across the whole kernel to maintain the uffd-wp bit as long as an arch supports, this also applies to this case where uffd-wp bit will be a hint to dirty information and it will not go lost easily (e.g. when some page cache ptes got zapped). 3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or resetting a range of memory, while there's no counterpart in the old soft-dirty world, hence if this is wanted in a new design we'll need a new interface otherwise. We can somehow understand that commonality because uffd-wp was fundamentally a similar idea of write-protecting pages just like soft-dirty. This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also gives us chance to modify impl of WP_ASYNC just in case it could be not depending on WP_UNPOPULATED anymore in the future kernels. It's also fine to imply that because both features will rely on PTE_MARKER_UFFD_WP config option, so they'll show up together (or both missing) in an UFFDIO_API probe. vma_can_userfault() now allows any VMA if the userfaultfd registration is only about async uffd-wp. So we can track dirty for all kinds of memory including generic file systems (like XFS, EXT4 or BTRFS). One trick worth mention in do_wp_page() is that we need to manually update vmf->orig_pte here because it can be used later with a pte_same() check - this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags. The major defect of this approach of dirty tracking is we need to populate the pgtables when tracking starts. Soft-dirty doesn't do it like that. It's unwanted in the case where the range of memory to track is huge and unpopulated (e.g., tracking updates on a 10G file with mmap() on top, without having any page cache installed yet). One way to improve this is to allow pte markers exist for larger than PTE level for PMD+. That will not change the interface if to implemented, so we can leave that for later. Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com Signed-off-by: Peter Xu <peterx@redhat.com> Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrei Vagin <avagin@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Miroslaw <emmir@google.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Paul Gofman <pgofman@codeweavers.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yun Zhou <yun.zhou@windriver.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/mm/memory.c
*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*/
/*
* demand-loading started 01.12.91 - seems it is high on the list of
* things wanted, and it should be easy to implement. - Linus
*/
/*
* Ok, demand-loading was easy, shared pages a little bit tricker. Shared
* pages started 02.12.91, seems to work. - Linus.
*
* Tested sharing by executing about 30 /bin/sh: under the old kernel it
* would have taken more than the 6M I have free, but it worked well as
* far as I could see.
*
* Also corrected some "invalidate()"s - I wasn't doing enough of them.
*/
/*
* Real VM (paging to/from disk) started 18.12.91. Much more work and
* thought has to go into this. Oh, well..
* 19.12.91 - works, somewhat. Sometimes I get faults, don't know why.
* Found it. Everything seems to work now.
* 20.12.91 - Ok, making the swap-device changeable like the root.
*/
/*
* 05.04.94 - Multi-page memory management added for v1.1.
* Idea by Alex Bligh (alex@cconcepts.co.uk)
*
* 16.07.99 - Support of BIGMEM added by Gerhard Wichert, Siemens AG
* (Gerhard.Wichert@pdb.siemens.de)
*
* Aug/Sep 2004 Changed to four level page tables (Andi Kleen)
*/
#include <linux/kernel_stat.h>
#include <linux/mm.h>
#include <linux/mm_inline.h>
#include <linux/sched/mm.h>
#include <linux/sched/coredump.h>
#include <linux/sched/numa_balancing.h>
#include <linux/sched/task.h>
#include <linux/hugetlb.h>
#include <linux/mman.h>
#include <linux/swap.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
#include <linux/memremap.h>
mm: kmsan: maintain KMSAN metadata for page operations Insert KMSAN hooks that make the necessary bookkeeping changes: - poison page shadow and origins in alloc_pages()/free_page(); - clear page shadow and origins in clear_page(), copy_user_highpage(); - copy page metadata in copy_highpage(), wp_page_copy(); - handle vmap()/vunmap()/iounmap(); Link: https://lkml.kernel.org/r/20220915150417.722975-15-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-15 15:03:48 +00:00
#include <linux/kmsan.h>
#include <linux/ksm.h>
#include <linux/rmap.h>
#include <linux/export.h>
#include <linux/delayacct.h>
#include <linux/init.h>
#include <linux/pfn_t.h>
#include <linux/writeback.h>
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
#include <linux/memcontrol.h>
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
#include <linux/mmu_notifier.h>
badpage: replace page_remove_rmap Eeek and BUG Now that bad pages are kept out of circulation, there is no need for the infamous page_remove_rmap() BUG() - once that page is freed, its negative mapcount will issue a "Bad page state" message and the page won't be freed. Removing the BUG() allows more info, on subsequent pages, to be gathered. We do have more info about the page at this point than bad_page() can know - notably, what the pmd is, which might pinpoint something like low 64kB corruption - but page_remove_rmap() isn't given the address to find that. In practice, there is only one call to page_remove_rmap() which has ever reported anything, that from zap_pte_range() (usually on exit, sometimes on munmap). It has all the info, so remove page_remove_rmap()'s "Eeek" message and leave it all to zap_pte_range(). mm/memory.c already has a hardly used print_bad_pte() function, showing some of the appropriate info: extend it to show what we want for the rmap case: pte info, page info (when there is a page) and vma info to compare. zap_pte_range() already knows the pmd, but print_bad_pte() is easier to use if it works that out for itself. Some of this info is also shown in bad_page()'s "Bad page state" message. Keep them separate, but adjust them to match each other as far as possible. Say "Bad page map" in print_bad_pte(), and add a TAINT_BAD_PAGE there too. print_bad_pte() show current->comm unconditionally (though it should get repeated in the usually irrelevant stack trace): sorry, I misled Nick Piggin to make it conditional on vm_mm == current->mm, but current->mm is already NULL in the exit case. Usually current->comm is good, though exceptionally it may not be that of the mm (when "swapoff" for example). Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 22:40:08 +00:00
#include <linux/swapops.h>
#include <linux/elf.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
#include <linux/migrate.h>
#include <linux/string.h>
mm/demotion: update node_is_toptier to work with memory tiers With memory tier support we can have memory only NUMA nodes in the top tier from which we want to avoid promotion tracking NUMA faults. Update node_is_toptier to work with memory tiers. All NUMA nodes are by default top tier nodes. With lower(slower) memory tiers added we consider all memory tiers above a memory tier having CPU NUMA nodes as a top memory tier [sj@kernel.org: include missed header file, memory-tiers.h] Link: https://lkml.kernel.org/r/20220820190720.248704-1-sj@kernel.org [akpm@linux-foundation.org: mm/memory.c needs linux/memory-tiers.h] [aneesh.kumar@linux.ibm.com: make toptier_distance inclusive upper bound of toptiers] Link: https://lkml.kernel.org/r/20220830081457.118960-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20220818131042.113280-10-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Wei Xu <weixugc@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Bharata B Rao <bharata@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hesham Almatary <hesham.almatary@huawei.com> Cc: Jagdish Gediya <jvgediya.oss@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-18 13:10:41 +00:00
#include <linux/memory-tiers.h>
#include <linux/debugfs.h>
#include <linux/userfaultfd_k.h>
#include <linux/dax.h>
mm, oom: fix potential data corruption when oom_reaper races with writer Wenwei Tao has noticed that our current assumption that the oom victim is dying and never doing any visible changes after it dies, and so the oom_reaper can tear it down, is not entirely true. __task_will_free_mem consider a task dying when SIGNAL_GROUP_EXIT is set but do_group_exit sends SIGKILL to all threads _after_ the flag is set. So there is a race window when some threads won't have fatal_signal_pending while the oom_reaper could start unmapping the address space. Moreover some paths might not check for fatal signals before each PF/g-u-p/copy_from_user. We already have a protection for oom_reaper vs. PF races by checking MMF_UNSTABLE. This has been, however, checked only for kernel threads (use_mm users) which can outlive the oom victim. A simple fix would be to extend the current check in handle_mm_fault for all tasks but that wouldn't be sufficient because the current check assumes that a kernel thread would bail out after EFAULT from get_user*/copy_from_user and never re-read the same address which would succeed because the PF path has established page tables already. This seems to be the case for the only existing use_mm user currently (virtio driver) but it is rather fragile in general. This is even more fragile in general for more complex paths such as generic_perform_write which can re-read the same address more times (e.g. iov_iter_copy_from_user_atomic to fail and then iov_iter_fault_in_readable on retry). Therefore we have to implement MMF_UNSTABLE protection in a robust way and never make a potentially corrupted content visible. That requires to hook deeper into the PF path and check for the flag _every time_ before a pte for anonymous memory is established (that means all !VM_SHARED mappings). The corruption can be triggered artificially (http://lkml.kernel.org/r/201708040646.v746kkhC024636@www262.sakura.ne.jp) but there doesn't seem to be any real life bug report. The race window should be quite tight to trigger most of the time. Link: http://lkml.kernel.org/r/20170807113839.16695-3-mhocko@kernel.org Fixes: aac453635549 ("mm, oom: introduce oom reaper") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Wenwei Tao <wenwei.tww@alibaba-inc.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:15 +00:00
#include <linux/oom.h>
mm: replace all open encodings for NUMA_NO_NODE Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:42:58 +00:00
#include <linux/numa.h>
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
#include <linux/perf_event.h>
#include <linux/ptrace.h>
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
#include <linux/vmalloc.h>
memory tiering: hot page selection with hint page fault latency Patch series "memory tiering: hot page selection", v4. To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory nodes need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). So in this patchset, we implement a new hot page identification algorithm based on the latency between NUMA balancing page table scanning and hint page fault. Which is a kind of mostly frequently accessed (MFU) algorithm. In NUMA balancing memory tiering mode, if there are hot pages in slow memory node and cold pages in fast memory node, we need to promote/demote hot/cold pages between the fast and cold memory nodes. A choice is to promote/demote as fast as possible. But the CPU cycles and memory bandwidth consumed by the high promoting/demoting throughput will hurt the latency of some workload because of accessing inflating and slow memory bandwidth contention. A way to resolve this issue is to restrict the max promoting/demoting throughput. It will take longer to finish the promoting/demoting. But the workload latency will be better. This is implemented in this patchset as the page promotion rate limit mechanism. The promotion hot threshold is workload and system configuration dependent. So in this patchset, a method to adjust the hot threshold automatically is implemented. The basic idea is to control the number of the candidate promotion pages to match the promotion rate limit. We used the pmbench memory accessing benchmark tested the patchset on a 2-socket server system with DRAM and PMEM installed. The test results are as follows, pmbench score promote rate (accesses/s) MB/s ------------- ------------ base 146887704.1 725.6 hot selection 165695601.2 544.0 rate limit 162814569.8 165.2 auto adjustment 170495294.0 136.9 From the results above, With hot page selection patch [1/3], the pmbench score increases about 12.8%, and promote rate (overhead) decreases about 25.0%, compared with base kernel. With rate limit patch [2/3], pmbench score decreases about 1.7%, and promote rate decreases about 69.6%, compared with hot page selection patch. With threshold auto adjustment patch [3/3], pmbench score increases about 4.7%, and promote rate decrease about 17.1%, compared with rate limit patch. Baolin helped to test the patchset with MySQL on a machine which contains 1 DRAM node (30G) and 1 PMEM node (126G). sysbench /usr/share/sysbench/oltp_read_write.lua \ ...... --tables=200 \ --table-size=1000000 \ --report-interval=10 \ --threads=16 \ --time=120 The tps can be improved about 5%. This patch (of 3): To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory node need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). The most frequently accessed (MFU) algorithm is better. So, in this patch we implemented a better hot page selection algorithm. Which is based on NUMA balancing page table scanning and hint page fault as follows, - When the page tables of the processes are scanned to change PTE/PMD to be PROT_NONE, the current time is recorded in struct page as scan time. - When the page is accessed, hint page fault will occur. The scan time is gotten from the struct page. And The hint page fault latency is defined as hint page fault time - scan time The shorter the hint page fault latency of a page is, the higher the probability of their access frequency to be higher. So the hint page fault latency is a better estimation of the page hot/cold. It's hard to find some extra space in struct page to hold the scan time. Fortunately, we can reuse some bits used by the original NUMA balancing. NUMA balancing uses some bits in struct page to store the page accessing CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the multi-stage node selection algorithm to avoid to migrate pages shared accessed by the NUMA nodes back and forth. But for pages in the slow memory node, even if they are shared accessed by multiple NUMA nodes, as long as the pages are hot, they need to be promoted to the fast memory node. So the accessing CPU and PID information are unnecessary for the slow memory pages. We can reuse these bits in struct page to record the scan time. For the fast memory pages, these bits are used as before. For the hot threshold, the default value is 1 second, which works well in our performance test. All pages with hint page fault latency < hot threshold will be considered hot. It's hard for users to determine the hot threshold. So we don't provide a kernel ABI to set it, just provide a debugfs interface for advanced users to experiment. We will continue to work on a hot threshold automatic adjustment mechanism. The downside of the above method is that the response time to the workload hot spot changing may be much longer. For example, - A previous cold memory area becomes hot - The hint page fault will be triggered. But the hint page fault latency isn't shorter than the hot threshold. So the pages will not be promoted. - When the memory area is scanned again, maybe after a scan period, the hint page fault latency measured will be shorter than the hot threshold and the pages will be promoted. To mitigate this, if there are enough free space in the fast memory node, the hot threshold will not be used, all pages will be promoted upon the hint page fault for fast response. Thanks Zhong Jiang reported and tested the fix for a bug when disabling memory tiering mode dynamically. Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: osalvador <osalvador@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 08:39:51 +00:00
#include <linux/sched/sysctl.h>
mm: emit tracepoint when RSS changes Useful to track how RSS is changing per TGID to detect spikes in RSS and memory hogs. Several Android teams have been using this patch in various kernel trees for half a year now. Many reported to me it is really useful so I'm posting it upstream. Initial patch developed by Tim Murray. Changes I made from original patch: o Prevent any additional space consumed by mm_struct. Regarding the fact that the RSS may change too often thus flooding the traces - note that, there is some "hysterisis" with this already. That is - We update the counter only if we receive 64 page faults due to SPLIT_RSS_ACCOUNTING. However, during zapping or copying of pte range, the RSS is updated immediately which can become noisy/flooding. In a previous discussion, we agreed that BPF or ftrace can be used to rate limit the signal if this becomes an issue. Also note that I added wrappers to trace_rss_stat to prevent compiler errors where linux/mm.h is included from tracing code, causing errors such as: CC kernel/trace/power-traces.o In file included from ./include/trace/define_trace.h:102, from ./include/trace/events/kmem.h:342, from ./include/linux/mm.h:31, from ./include/linux/ring_buffer.h:5, from ./include/linux/trace_events.h:6, from ./include/trace/events/power.h:12, from kernel/trace/power-traces.c:15: ./include/trace/trace_events.h:113:22: error: field `ent' has incomplete type struct trace_entry ent; \ Link: http://lore.kernel.org/r/20190903200905.198642-1-joel@joelfernandes.org Link: http://lkml.kernel.org/r/20191001172817.234886-1-joel@joelfernandes.org Co-developed-by: Tim Murray <timmurray@google.com> Signed-off-by: Tim Murray <timmurray@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Carmen Jackson <carmenjackson@google.com> Cc: Mayank Gupta <mayankgupta@google.com> Cc: Daniel Colascione <dancol@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Minchan Kim <minchan@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:30 +00:00
#include <trace/events/kmem.h>
#include <asm/io.h>
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys Today, for normal faults and page table walks, we check the VMA and/or PTE to ensure that it is compatible with the action. For instance, if we get a write fault on a non-writeable VMA, we SIGSEGV. We try to do the same thing for protection keys. Basically, we try to make sure that if a user does this: mprotect(ptr, size, PROT_NONE); *ptr = foo; they see the same effects with protection keys when they do this: mprotect(ptr, size, PROT_READ|PROT_WRITE); set_pkey(ptr, size, 4); wrpkru(0xffffff3f); // access disable pkey 4 *ptr = foo; The state to do that checking is in the VMA, but we also sometimes have to do it on the page tables only, like when doing a get_user_pages_fast() where we have no VMA. We add two functions and expose them to generic code: arch_pte_access_permitted(pte_flags, write) arch_vma_access_permitted(vma, write) These are, of course, backed up in x86 arch code with checks against the PTE or VMA's protection key. But, there are also cases where we do not want to respect protection keys. When we ptrace(), for instance, we do not want to apply the tracer's PKRU permissions to the PTEs from the process being traced. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160212210219.14D5D715@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-12 21:02:19 +00:00
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
#include <linux/uaccess.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
#include "pgalloc-track.h"
#include "internal.h"
mm: create new mm/swap.h header file Patch series "MM changes to improve swap-over-NFS support". Assorted improvements for swap-via-filesystem. This is a resend of these patches, rebased on current HEAD. The only substantial changes is that swap_dirty_folio has replaced swap_set_page_dirty. Currently swap-via-fs (SWP_FS_OPS) doesn't work for any filesystem. It has previously worked for NFS but that broke a few releases back. This series changes to use a new ->swap_rw rather than ->readpage and ->direct_IO. It also makes other improvements. There is a companion series already in linux-next which fixes various issues with NFS. Once both series land, a final patch is needed which changes NFS over to use ->swap_rw. This patch (of 10): Many functions declared in include/linux/swap.h are only used within mm/ Create a new "mm/swap.h" and move some of these declarations there. Remove the redundant 'extern' from the function declarations. [akpm@linux-foundation.org: mm/memory-failure.c needs mm/swap.h] Link: https://lkml.kernel.org/r/164859751830.29473.5309689752169286816.stgit@noble.brown Link: https://lkml.kernel.org/r/164859778120.29473.11725907882296224053.stgit@noble.brown Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:47 +00:00
#include "swap.h"
#if defined(LAST_CPUPID_NOT_IN_PAGE_FLAGS) && !defined(CONFIG_COMPILE_TEST)
#warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid.
#endif
#ifndef CONFIG_NUMA
unsigned long max_mapnr;
EXPORT_SYMBOL(max_mapnr);
struct page *mem_map;
EXPORT_SYMBOL(mem_map);
#endif
static vm_fault_t do_fault(struct vm_fault *vmf);
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
static vm_fault_t do_anonymous_page(struct vm_fault *vmf);
static bool vmf_pte_changed(struct vm_fault *vmf);
/*
* Return true if the original pte was a uffd-wp pte marker (so the pte was
* wr-protected).
*/
static __always_inline bool vmf_orig_pte_uffd_wp(struct vm_fault *vmf)
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
{
if (!userfaultfd_wp(vmf->vma))
return false;
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
if (!(vmf->flags & FAULT_FLAG_ORIG_PTE_VALID))
return false;
return pte_marker_uffd_wp(vmf->orig_pte);
}
/*
* A number of key systems in x86 including ioremap() rely on the assumption
* that high_memory defines the upper bound on direct map memory, then end
* of ZONE_NORMAL.
*/
void *high_memory;
EXPORT_SYMBOL(high_memory);
/*
* Randomize the address space (stacks, mmaps, brk, etc.).
*
* ( When CONFIG_COMPAT_BRK=y we exclude brk from randomization,
* as ancient (libc5 based) binaries can segfault. )
*/
int randomize_va_space __read_mostly =
#ifdef CONFIG_COMPAT_BRK
1;
#else
2;
#endif
2020-11-24 18:48:26 +00:00
#ifndef arch_wants_old_prefaulted_pte
static inline bool arch_wants_old_prefaulted_pte(void)
{
/*
* Transitioning a PTE from 'old' to 'young' can be expensive on
* some architectures, even if it's performed in hardware. By
* default, "false" means prefaulted entries will be 'young'.
*/
return false;
}
#endif
static int __init disable_randmaps(char *s)
{
randomize_va_space = 0;
return 1;
}
__setup("norandmaps", disable_randmaps);
unsigned long zero_pfn __read_mostly;
EXPORT_SYMBOL(zero_pfn);
unsigned long highest_memmap_pfn __read_mostly;
mm: reinstate ZERO_PAGE KAMEZAWA Hiroyuki has observed customers of earlier kernels taking advantage of the ZERO_PAGE: which we stopped do_anonymous_page() from using in 2.6.24. And there were a couple of regression reports on LKML. Following suggestions from Linus, reinstate do_anonymous_page() use of the ZERO_PAGE; but this time avoid dirtying its struct page cacheline with (map)count updates - let vm_normal_page() regard it as abnormal. Use it only on arches which __HAVE_ARCH_PTE_SPECIAL (x86, s390, sh32, most powerpc): that's not essential, but minimizes additional branches (keeping them in the unlikely pte_special case); and incidentally excludes mips (some models of which needed eight colours of ZERO_PAGE to avoid costly exceptions). Don't be fanatical about avoiding ZERO_PAGE updates: get_user_pages() callers won't want to make exceptions for it, so increment its count there. Changes to mlock and migration? happily seems not needed. In most places it's quicker to check pfn than struct page address: prepare a __read_mostly zero_pfn for that. Does get_dump_page() still need its ZERO_PAGE check? probably not, but keep it anyway. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:03:30 +00:00
/*
* CONFIG_MMU architectures set up ZERO_PAGE in their paging_init()
*/
static int __init init_zero_pfn(void)
{
zero_pfn = page_to_pfn(ZERO_PAGE(0));
return 0;
}
mm: fix race by making init_zero_pfn() early_initcall There are code paths that rely on zero_pfn to be fully initialized before core_initcall. For example, wq_sysfs_init() is a core_initcall function that eventually results in a call to kernel_execve, which causes a page fault with a subsequent mmput. If zero_pfn is not initialized by then it may not get cleaned up properly and result in an error: BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:1 Here is an analysis of the race as seen on a MIPS device. On this particular MT7621 device (Ubiquiti ER-X), zero_pfn is PFN 0 until initialized, at which point it becomes PFN 5120: 1. wq_sysfs_init calls into kobject_uevent_env at core_initcall: kobject_uevent_env+0x7e4/0x7ec kset_register+0x68/0x88 bus_register+0xdc/0x34c subsys_virtual_register+0x34/0x78 wq_sysfs_init+0x1c/0x4c do_one_initcall+0x50/0x1a8 kernel_init_freeable+0x230/0x2c8 kernel_init+0x10/0x100 ret_from_kernel_thread+0x14/0x1c 2. kobject_uevent_env() calls call_usermodehelper_exec() which executes kernel_execve asynchronously. 3. Memory allocations in kernel_execve cause a page fault, bumping the MM reference counter: add_mm_counter_fast+0xb4/0xc0 handle_mm_fault+0x6e4/0xea0 __get_user_pages.part.78+0x190/0x37c __get_user_pages_remote+0x128/0x360 get_arg_page+0x34/0xa0 copy_string_kernel+0x194/0x2a4 kernel_execve+0x11c/0x298 call_usermodehelper_exec_async+0x114/0x194 4. In case zero_pfn has not been initialized yet, zap_pte_range does not decrement the MM_ANONPAGES RSS counter and the BUG message is triggered shortly afterwards when __mmdrop checks the ref counters: __mmdrop+0x98/0x1d0 free_bprm+0x44/0x118 kernel_execve+0x160/0x1d8 call_usermodehelper_exec_async+0x114/0x194 ret_from_kernel_thread+0x14/0x1c To avoid races such as described above, initialize init_zero_pfn at early_initcall level. Depending on the architecture, ZERO_PAGE is either constant or gets initialized even earlier, at paging_init, so there is no issue with initializing zero_pfn earlier. Link: https://lkml.kernel.org/r/CALCv0x2YqOXEAy2Q=hafjhHCtTHVodChv1qpM=niAXOpqEbt7w@mail.gmail.com Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: stable@vger.kernel.org Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-30 04:42:08 +00:00
early_initcall(init_zero_pfn);
mm: convert mm's rss stats into percpu_counter Currently mm_struct maintains rss_stats which are updated on page fault and the unmapping codepaths. For page fault codepath the updates are cached per thread with the batch of TASK_RSS_EVENTS_THRESH which is 64. The reason for caching is performance for multithreaded applications otherwise the rss_stats updates may become hotspot for such applications. However this optimization comes with the cost of error margin in the rss stats. The rss_stats for applications with large number of threads can be very skewed. At worst the error margin is (nr_threads * 64) and we have a lot of applications with 100s of threads, so the error margin can be very high. Internally we had to reduce TASK_RSS_EVENTS_THRESH to 32. Recently we started seeing the unbounded errors for rss_stats for specific applications which use TCP rx0cp. It seems like vm_insert_pages() codepath does not sync rss_stats at all. This patch converts the rss_stats into percpu_counter to convert the error margin from (nr_threads * 64) to approximately (nr_cpus ^ 2). However this conversion enable us to get the accurate stats for situations where accuracy is more important than the cpu cost. This patch does not make such tradeoffs - we can just use percpu_counter_add_local() for the updates and percpu_counter_sum() (or percpu_counter_sync() + percpu_counter_read) for the readers. At the moment the readers are either procfs interface, oom_killer and memory reclaim which I think are not performance critical and should be ok with slow read. However I think we can make that change in a separate patch. Link: https://lkml.kernel.org/r/20221024052841.3291983-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 05:28:41 +00:00
void mm_trace_rss_stat(struct mm_struct *mm, int member)
mm: emit tracepoint when RSS changes Useful to track how RSS is changing per TGID to detect spikes in RSS and memory hogs. Several Android teams have been using this patch in various kernel trees for half a year now. Many reported to me it is really useful so I'm posting it upstream. Initial patch developed by Tim Murray. Changes I made from original patch: o Prevent any additional space consumed by mm_struct. Regarding the fact that the RSS may change too often thus flooding the traces - note that, there is some "hysterisis" with this already. That is - We update the counter only if we receive 64 page faults due to SPLIT_RSS_ACCOUNTING. However, during zapping or copying of pte range, the RSS is updated immediately which can become noisy/flooding. In a previous discussion, we agreed that BPF or ftrace can be used to rate limit the signal if this becomes an issue. Also note that I added wrappers to trace_rss_stat to prevent compiler errors where linux/mm.h is included from tracing code, causing errors such as: CC kernel/trace/power-traces.o In file included from ./include/trace/define_trace.h:102, from ./include/trace/events/kmem.h:342, from ./include/linux/mm.h:31, from ./include/linux/ring_buffer.h:5, from ./include/linux/trace_events.h:6, from ./include/trace/events/power.h:12, from kernel/trace/power-traces.c:15: ./include/trace/trace_events.h:113:22: error: field `ent' has incomplete type struct trace_entry ent; \ Link: http://lore.kernel.org/r/20190903200905.198642-1-joel@joelfernandes.org Link: http://lkml.kernel.org/r/20191001172817.234886-1-joel@joelfernandes.org Co-developed-by: Tim Murray <timmurray@google.com> Signed-off-by: Tim Murray <timmurray@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Carmen Jackson <carmenjackson@google.com> Cc: Mayank Gupta <mayankgupta@google.com> Cc: Daniel Colascione <dancol@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Minchan Kim <minchan@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:30 +00:00
{
mm: convert mm's rss stats into percpu_counter Currently mm_struct maintains rss_stats which are updated on page fault and the unmapping codepaths. For page fault codepath the updates are cached per thread with the batch of TASK_RSS_EVENTS_THRESH which is 64. The reason for caching is performance for multithreaded applications otherwise the rss_stats updates may become hotspot for such applications. However this optimization comes with the cost of error margin in the rss stats. The rss_stats for applications with large number of threads can be very skewed. At worst the error margin is (nr_threads * 64) and we have a lot of applications with 100s of threads, so the error margin can be very high. Internally we had to reduce TASK_RSS_EVENTS_THRESH to 32. Recently we started seeing the unbounded errors for rss_stats for specific applications which use TCP rx0cp. It seems like vm_insert_pages() codepath does not sync rss_stats at all. This patch converts the rss_stats into percpu_counter to convert the error margin from (nr_threads * 64) to approximately (nr_cpus ^ 2). However this conversion enable us to get the accurate stats for situations where accuracy is more important than the cpu cost. This patch does not make such tradeoffs - we can just use percpu_counter_add_local() for the updates and percpu_counter_sum() (or percpu_counter_sync() + percpu_counter_read) for the readers. At the moment the readers are either procfs interface, oom_killer and memory reclaim which I think are not performance critical and should be ok with slow read. However I think we can make that change in a separate patch. Link: https://lkml.kernel.org/r/20221024052841.3291983-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 05:28:41 +00:00
trace_rss_stat(mm, member);
mm: emit tracepoint when RSS changes Useful to track how RSS is changing per TGID to detect spikes in RSS and memory hogs. Several Android teams have been using this patch in various kernel trees for half a year now. Many reported to me it is really useful so I'm posting it upstream. Initial patch developed by Tim Murray. Changes I made from original patch: o Prevent any additional space consumed by mm_struct. Regarding the fact that the RSS may change too often thus flooding the traces - note that, there is some "hysterisis" with this already. That is - We update the counter only if we receive 64 page faults due to SPLIT_RSS_ACCOUNTING. However, during zapping or copying of pte range, the RSS is updated immediately which can become noisy/flooding. In a previous discussion, we agreed that BPF or ftrace can be used to rate limit the signal if this becomes an issue. Also note that I added wrappers to trace_rss_stat to prevent compiler errors where linux/mm.h is included from tracing code, causing errors such as: CC kernel/trace/power-traces.o In file included from ./include/trace/define_trace.h:102, from ./include/trace/events/kmem.h:342, from ./include/linux/mm.h:31, from ./include/linux/ring_buffer.h:5, from ./include/linux/trace_events.h:6, from ./include/trace/events/power.h:12, from kernel/trace/power-traces.c:15: ./include/trace/trace_events.h:113:22: error: field `ent' has incomplete type struct trace_entry ent; \ Link: http://lore.kernel.org/r/20190903200905.198642-1-joel@joelfernandes.org Link: http://lkml.kernel.org/r/20191001172817.234886-1-joel@joelfernandes.org Co-developed-by: Tim Murray <timmurray@google.com> Signed-off-by: Tim Murray <timmurray@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Carmen Jackson <carmenjackson@google.com> Cc: Mayank Gupta <mayankgupta@google.com> Cc: Daniel Colascione <dancol@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Minchan Kim <minchan@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:30 +00:00
}
/*
* Note: this doesn't free the actual pages themselves. That
* has been handled earlier when unmapping all the memory regions.
*/
static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd,
unsigned long addr)
{
CONFIG_HIGHPTE vs. sub-page page tables. Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:22:04 +00:00
pgtable_t token = pmd_pgtable(*pmd);
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
pmd_clear(pmd);
pte_free_tlb(tlb, token, addr);
mm_dec_nr_ptes(tlb->mm);
}
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
static inline void free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pmd_t *pmd;
unsigned long next;
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
unsigned long start;
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
start = addr;
pmd = pmd_offset(pud, addr);
do {
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
free_pte_range(tlb, pmd, addr);
} while (pmd++, addr = next, addr != end);
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
start &= PUD_MASK;
if (start < floor)
return;
if (ceiling) {
ceiling &= PUD_MASK;
if (!ceiling)
return;
}
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
if (end - 1 > ceiling - 1)
return;
pmd = pmd_offset(pud, start);
pud_clear(pud);
pmd_free_tlb(tlb, pmd, start);
mm: account pmd page tables to the process Dave noticed that unprivileged process can allocate significant amount of memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PMD page tables. Linux kernel doesn't account PMD tables to the process, only PTE. The use-cases below use few tricks to allocate a lot of PMD page tables while keeping VmRSS and VmPTE low. oom_score for the process will be 0. #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/prctl.h> #define PUD_SIZE (1UL << 30) #define PMD_SIZE (1UL << 21) #define NR_PUD 130000 int main(void) { char *addr = NULL; unsigned long i; prctl(PR_SET_THP_DISABLE); for (i = 0; i < NR_PUD ; i++) { addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (addr == MAP_FAILED) { perror("mmap"); break; } *addr = 'x'; munmap(addr, PMD_SIZE); mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0); if (addr == MAP_FAILED) perror("re-mmap"), exit(1); } printf("PID %d consumed %lu KiB in PMD page tables\n", getpid(), i * 4096 >> 10); return pause(); } The patch addresses the issue by account PMD tables to the process the same way we account PTE. The main place where PMD tables is accounted is __pmd_alloc() and free_pmd_range(). But there're few corner cases: - HugeTLB can share PMD page tables. The patch handles by accounting the table to all processes who share it. - x86 PAE pre-allocates few PMD tables on fork. - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity check on exit(2). Accounting only happens on configuration where PMD page table's level is present (PMD is not folded). As with nr_ptes we use per-mm counter. The counter value is used to calculate baseline for badness score by oom-killer. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: David Rientjes <rientjes@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 23:26:50 +00:00
mm_dec_nr_pmds(tlb->mm);
}
static inline void free_pud_range(struct mmu_gather *tlb, p4d_t *p4d,
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pud_t *pud;
unsigned long next;
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
unsigned long start;
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
start = addr;
pud = pud_offset(p4d, addr);
do {
next = pud_addr_end(addr, end);
if (pud_none_or_clear_bad(pud))
continue;
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
free_pmd_range(tlb, pud, addr, next, floor, ceiling);
} while (pud++, addr = next, addr != end);
start &= P4D_MASK;
if (start < floor)
return;
if (ceiling) {
ceiling &= P4D_MASK;
if (!ceiling)
return;
}
if (end - 1 > ceiling - 1)
return;
pud = pud_offset(p4d, start);
p4d_clear(p4d);
pud_free_tlb(tlb, pud, start);
mm_dec_nr_puds(tlb->mm);
}
static inline void free_p4d_range(struct mmu_gather *tlb, pgd_t *pgd,
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
p4d_t *p4d;
unsigned long next;
unsigned long start;
start = addr;
p4d = p4d_offset(pgd, addr);
do {
next = p4d_addr_end(addr, end);
if (p4d_none_or_clear_bad(p4d))
continue;
free_pud_range(tlb, p4d, addr, next, floor, ceiling);
} while (p4d++, addr = next, addr != end);
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
start &= PGDIR_MASK;
if (start < floor)
return;
if (ceiling) {
ceiling &= PGDIR_MASK;
if (!ceiling)
return;
}
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
if (end - 1 > ceiling - 1)
return;
p4d = p4d_offset(pgd, start);
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
pgd_clear(pgd);
p4d_free_tlb(tlb, p4d, start);
}
/*
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
* This function frees user-level page tables of a process.
*/
void free_pgd_range(struct mmu_gather *tlb,
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
unsigned long addr, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pgd_t *pgd;
unsigned long next;
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
/*
* The next few lines have given us lots of grief...
*
* Why are we testing PMD* at this top level? Because often
* there will be no work to do at all, and we'd prefer not to
* go all the way down to the bottom just to discover that.
*
* Why all these "- 1"s? Because 0 represents both the bottom
* of the address space and the top of it (using -1 for the
* top wouldn't help much: the masks would do the wrong thing).
* The rule is that addr 0 and floor 0 refer to the bottom of
* the address space, but end 0 and ceiling 0 refer to the top
* Comparisons need to use "end - 1" and "ceiling - 1" (though
* that end 0 case should be mythical).
*
* Wherever addr is brought up or ceiling brought down, we must
* be careful to reject "the opposite 0" before it confuses the
* subsequent tests. But what about where end is brought down
* by PMD_SIZE below? no, end can't go down to 0 there.
*
* Whereas we round start (addr) and ceiling down, by different
* masks at different levels, in order to test whether a table
* now has no other vmas using it, so can be freed, we don't
* bother to round floor or end up - the tests don't need that.
*/
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
addr &= PMD_MASK;
if (addr < floor) {
addr += PMD_SIZE;
if (!addr)
return;
}
if (ceiling) {
ceiling &= PMD_MASK;
if (!ceiling)
return;
}
if (end - 1 > ceiling - 1)
end -= PMD_SIZE;
if (addr > end - 1)
return;
/*
* We add page table cache pages with PAGE_SIZE,
* (see pte_free_tlb()), flush the tlb if we need
*/
tlb_change_page_size(tlb, PAGE_SIZE);
pgd = pgd_offset(tlb->mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
free_p4d_range(tlb, pgd, addr, next, floor, ceiling);
} while (pgd++, addr = next, addr != end);
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
}
void free_pgtables(struct mmu_gather *tlb, struct ma_state *mas,
mm: remove the vma linked list Replace any vm_next use with vma_find(). Update free_pgtables(), unmap_vmas(), and zap_page_range() to use the maple tree. Use the new free_pgtables() and unmap_vmas() in do_mas_align_munmap(). At the same time, alter the loop to be more compact. Now that free_pgtables() and unmap_vmas() take a maple tree as an argument, rearrange do_mas_align_munmap() to use the new tree to hold the vmas to remove. Remove __vma_link_list() and __vma_unlink_list() as they are exclusively used to update the linked list. Drop linked list update from __insert_vm_struct(). Rework validation of tree as it was depending on the linked list. [yang.lee@linux.alibaba.com: fix one kernel-doc comment] Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1949 Link: https://lkml.kernel.org/r/20220824021918.94116-1-yang.lee@linux.alibaba.comLink: https://lkml.kernel.org/r/20220906194824.2110408-69-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-06 19:49:06 +00:00
struct vm_area_struct *vma, unsigned long floor,
unsigned long ceiling, bool mm_wr_locked)
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
{
2024-05-21 23:43:21 +00:00
struct unlink_vma_file_batch vb;
mm: remove the vma linked list Replace any vm_next use with vma_find(). Update free_pgtables(), unmap_vmas(), and zap_page_range() to use the maple tree. Use the new free_pgtables() and unmap_vmas() in do_mas_align_munmap(). At the same time, alter the loop to be more compact. Now that free_pgtables() and unmap_vmas() take a maple tree as an argument, rearrange do_mas_align_munmap() to use the new tree to hold the vmas to remove. Remove __vma_link_list() and __vma_unlink_list() as they are exclusively used to update the linked list. Drop linked list update from __insert_vm_struct(). Rework validation of tree as it was depending on the linked list. [yang.lee@linux.alibaba.com: fix one kernel-doc comment] Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1949 Link: https://lkml.kernel.org/r/20220824021918.94116-1-yang.lee@linux.alibaba.comLink: https://lkml.kernel.org/r/20220906194824.2110408-69-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-06 19:49:06 +00:00
do {
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
unsigned long addr = vma->vm_start;
mm: remove the vma linked list Replace any vm_next use with vma_find(). Update free_pgtables(), unmap_vmas(), and zap_page_range() to use the maple tree. Use the new free_pgtables() and unmap_vmas() in do_mas_align_munmap(). At the same time, alter the loop to be more compact. Now that free_pgtables() and unmap_vmas() take a maple tree as an argument, rearrange do_mas_align_munmap() to use the new tree to hold the vmas to remove. Remove __vma_link_list() and __vma_unlink_list() as they are exclusively used to update the linked list. Drop linked list update from __insert_vm_struct(). Rework validation of tree as it was depending on the linked list. [yang.lee@linux.alibaba.com: fix one kernel-doc comment] Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1949 Link: https://lkml.kernel.org/r/20220824021918.94116-1-yang.lee@linux.alibaba.comLink: https://lkml.kernel.org/r/20220906194824.2110408-69-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-06 19:49:06 +00:00
struct vm_area_struct *next;
/*
* Note: USER_PGTABLES_CEILING may be passed as ceiling and may
* be 0. This will underflow and is okay.
*/
next = mas_find(mas, ceiling - 1);
fork: use __mt_dup() to duplicate maple tree in dup_mmap() In dup_mmap(), using __mt_dup() to duplicate the old maple tree and then directly replacing the entries of VMAs in the new maple tree can result in better performance. __mt_dup() uses DFS pre-order to duplicate the maple tree, so it is efficient. The average time complexity of __mt_dup() is O(n), where n is the number of VMAs. The proof of the time complexity is provided in the commit log that introduces __mt_dup(). After duplicating the maple tree, each element is traversed and replaced (ignoring the cases of deletion, which are rare). Since it is only a replacement operation for each element, this process is also O(n). Analyzing the exact time complexity of the previous algorithm is challenging because each insertion can involve appending to a node, pushing data to adjacent nodes, or even splitting nodes. The frequency of each action is difficult to calculate. The worst-case scenario for a single insertion is when the tree undergoes splitting at every level. If we consider each insertion as the worst-case scenario, we can determine that the upper bound of the time complexity is O(n*log(n)), although this is a loose upper bound. However, based on the test data, it appears that the actual time complexity is likely to be O(n). As the entire maple tree is duplicated using __mt_dup(), if dup_mmap() fails, there will be a portion of VMAs that have not been duplicated in the maple tree. To handle this, we mark the failure point with XA_ZERO_ENTRY. In exit_mmap(), if this marker is encountered, stop releasing VMAs that have not been duplicated after this point. There is a "spawn" in byte-unixbench[1], which can be used to test the performance of fork(). I modified it slightly to make it work with different number of VMAs. Below are the test results. The first row shows the number of VMAs. The second and third rows show the number of fork() calls per ten seconds, corresponding to next-20231006 and the this patchset, respectively. The test results were obtained with CPU binding to avoid scheduler load balancing that could cause unstable results. There are still some fluctuations in the test results, but at least they are better than the original performance. 21 121 221 421 821 1621 3221 6421 12821 25621 51221 112100 76261 54227 34035 20195 11112 6017 3161 1606 802 393 114558 83067 65008 45824 28751 16072 8922 4747 2436 1233 599 2.19% 8.92% 19.88% 34.64% 42.37% 44.64% 48.28% 50.17% 51.68% 53.74% 52.42% [1] https://github.com/kdlucas/byte-unixbench/tree/master Link: https://lkml.kernel.org/r/20231027033845.90608-11-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-27 03:38:45 +00:00
if (unlikely(xa_is_zero(next)))
next = NULL;
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
[PATCH] mm: unlink vma before pagetables In most places the descent from pgd to pud to pmd to pte holds mmap_sem (exclusively or not), which ensures that free_pgtables cannot be freeing page tables from any level at the same time. But truncation and reverse mapping descend without mmap_sem. No problem: just make sure that a vma is unlinked from its prio_tree (or nonlinear list) and from its anon_vma list, after zapping the vma, but before freeing its page tables. Then neither vmtruncate nor rmap can reach that vma whose page tables are now volatile (nor do they need to reach it, since all its page entries have been zapped by this stage). The i_mmap_lock and anon_vma->lock already serialize this correctly; but the locking hierarchy is such that we cannot take them while holding page_table_lock. Well, we're trying to push that down anyway. So in this patch, move anon_vma_unlink and unlink_file_vma into free_pgtables, at the same time as moving page_table_lock around calls to unmap_vmas. tlb_gather_mmu and tlb_finish_mmu then fall outside the page_table_lock, but we made them preempt_disable and preempt_enable earlier; and a long source audit of all the architectures has shown no problem with removing page_table_lock from them. free_pgtables doesn't need page_table_lock for itself, nor for what it calls; tlb->mm->nr_ptes is usually protected by page_table_lock, but partly by non-exclusive mmap_sem - here it's decremented with exclusive mmap_sem, or mm_users 0. update_hiwater_rss and vm_unacct_memory don't need page_table_lock either. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:29 +00:00
/*
* Hide vma from rmap and truncate_pagecache before freeing
* pgtables
[PATCH] mm: unlink vma before pagetables In most places the descent from pgd to pud to pmd to pte holds mmap_sem (exclusively or not), which ensures that free_pgtables cannot be freeing page tables from any level at the same time. But truncation and reverse mapping descend without mmap_sem. No problem: just make sure that a vma is unlinked from its prio_tree (or nonlinear list) and from its anon_vma list, after zapping the vma, but before freeing its page tables. Then neither vmtruncate nor rmap can reach that vma whose page tables are now volatile (nor do they need to reach it, since all its page entries have been zapped by this stage). The i_mmap_lock and anon_vma->lock already serialize this correctly; but the locking hierarchy is such that we cannot take them while holding page_table_lock. Well, we're trying to push that down anyway. So in this patch, move anon_vma_unlink and unlink_file_vma into free_pgtables, at the same time as moving page_table_lock around calls to unmap_vmas. tlb_gather_mmu and tlb_finish_mmu then fall outside the page_table_lock, but we made them preempt_disable and preempt_enable earlier; and a long source audit of all the architectures has shown no problem with removing page_table_lock from them. free_pgtables doesn't need page_table_lock for itself, nor for what it calls; tlb->mm->nr_ptes is usually protected by page_table_lock, but partly by non-exclusive mmap_sem - here it's decremented with exclusive mmap_sem, or mm_users 0. update_hiwater_rss and vm_unacct_memory don't need page_table_lock either. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:29 +00:00
*/
if (mm_wr_locked)
vma_start_write(vma);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
unlink_anon_vmas(vma);
[PATCH] mm: unlink vma before pagetables In most places the descent from pgd to pud to pmd to pte holds mmap_sem (exclusively or not), which ensures that free_pgtables cannot be freeing page tables from any level at the same time. But truncation and reverse mapping descend without mmap_sem. No problem: just make sure that a vma is unlinked from its prio_tree (or nonlinear list) and from its anon_vma list, after zapping the vma, but before freeing its page tables. Then neither vmtruncate nor rmap can reach that vma whose page tables are now volatile (nor do they need to reach it, since all its page entries have been zapped by this stage). The i_mmap_lock and anon_vma->lock already serialize this correctly; but the locking hierarchy is such that we cannot take them while holding page_table_lock. Well, we're trying to push that down anyway. So in this patch, move anon_vma_unlink and unlink_file_vma into free_pgtables, at the same time as moving page_table_lock around calls to unmap_vmas. tlb_gather_mmu and tlb_finish_mmu then fall outside the page_table_lock, but we made them preempt_disable and preempt_enable earlier; and a long source audit of all the architectures has shown no problem with removing page_table_lock from them. free_pgtables doesn't need page_table_lock for itself, nor for what it calls; tlb->mm->nr_ptes is usually protected by page_table_lock, but partly by non-exclusive mmap_sem - here it's decremented with exclusive mmap_sem, or mm_users 0. update_hiwater_rss and vm_unacct_memory don't need page_table_lock either. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:29 +00:00
[PATCH] hugepage: Fix hugepage logic in free_pgtables() free_pgtables() has special logic to call hugetlb_free_pgd_range() instead of the normal free_pgd_range() on hugepage VMAs. However, the test it uses to do so is incorrect: it calls is_hugepage_only_range on a hugepage sized range at the start of the vma. is_hugepage_only_range() will return true if the given range has any intersection with a hugepage address region, and in this case the given region need not be hugepage aligned. So, for example, this test can return true if called on, say, a 4k VMA immediately preceding a (nicely aligned) hugepage VMA. At present we get away with this because the powerpc version of hugetlb_free_pgd_range() is just a call to free_pgd_range(). On ia64 (the only other arch with a non-trivial is_hugepage_only_range()) we get away with it for a different reason; the hugepage area is not contiguous with the rest of the user address space, and VMAs are not permitted in between, so the test can't return a false positive there. Nonetheless this should be fixed. We do that in the patch below by replacing the is_hugepage_only_range() test with an explicit test of the VMA using is_vm_hugetlb_page(). This in turn changes behaviour for platforms where is_hugepage_only_range() returns false always (everything except powerpc and ia64). We address this by ensuring that hugetlb_free_pgd_range() is defined to be identical to free_pgd_range() (instead of a no-op) on everything except ia64. Even so, it will prevent some otherwise possible coalescing of calls down to free_pgd_range(). Since this only happens for hugepage VMAs, removing this small optimization seems unlikely to cause any trouble. This patch causes no regressions on the libhugetlbfs testsuite - ppc64 POWER5 (8-way), ppc64 G5 (2-way) and i386 Pentium M (UP). Signed-off-by: David Gibson <dwg@au1.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 08:08:57 +00:00
if (is_vm_hugetlb_page(vma)) {
2024-05-21 23:43:21 +00:00
unlink_file_vma(vma);
hugetlb_free_pgd_range(tlb, addr, vma->vm_end,
floor, next ? next->vm_start : ceiling);
} else {
2024-05-21 23:43:21 +00:00
unlink_file_vma_batch_init(&vb);
unlink_file_vma_batch_add(&vb, vma);
/*
* Optimization: gather nearby vmas into one call down
*/
while (next && next->vm_start <= vma->vm_end + PMD_SIZE
&& !is_vm_hugetlb_page(next)) {
vma = next;
next = mas_find(mas, ceiling - 1);
fork: use __mt_dup() to duplicate maple tree in dup_mmap() In dup_mmap(), using __mt_dup() to duplicate the old maple tree and then directly replacing the entries of VMAs in the new maple tree can result in better performance. __mt_dup() uses DFS pre-order to duplicate the maple tree, so it is efficient. The average time complexity of __mt_dup() is O(n), where n is the number of VMAs. The proof of the time complexity is provided in the commit log that introduces __mt_dup(). After duplicating the maple tree, each element is traversed and replaced (ignoring the cases of deletion, which are rare). Since it is only a replacement operation for each element, this process is also O(n). Analyzing the exact time complexity of the previous algorithm is challenging because each insertion can involve appending to a node, pushing data to adjacent nodes, or even splitting nodes. The frequency of each action is difficult to calculate. The worst-case scenario for a single insertion is when the tree undergoes splitting at every level. If we consider each insertion as the worst-case scenario, we can determine that the upper bound of the time complexity is O(n*log(n)), although this is a loose upper bound. However, based on the test data, it appears that the actual time complexity is likely to be O(n). As the entire maple tree is duplicated using __mt_dup(), if dup_mmap() fails, there will be a portion of VMAs that have not been duplicated in the maple tree. To handle this, we mark the failure point with XA_ZERO_ENTRY. In exit_mmap(), if this marker is encountered, stop releasing VMAs that have not been duplicated after this point. There is a "spawn" in byte-unixbench[1], which can be used to test the performance of fork(). I modified it slightly to make it work with different number of VMAs. Below are the test results. The first row shows the number of VMAs. The second and third rows show the number of fork() calls per ten seconds, corresponding to next-20231006 and the this patchset, respectively. The test results were obtained with CPU binding to avoid scheduler load balancing that could cause unstable results. There are still some fluctuations in the test results, but at least they are better than the original performance. 21 121 221 421 821 1621 3221 6421 12821 25621 51221 112100 76261 54227 34035 20195 11112 6017 3161 1606 802 393 114558 83067 65008 45824 28751 16072 8922 4747 2436 1233 599 2.19% 8.92% 19.88% 34.64% 42.37% 44.64% 48.28% 50.17% 51.68% 53.74% 52.42% [1] https://github.com/kdlucas/byte-unixbench/tree/master Link: https://lkml.kernel.org/r/20231027033845.90608-11-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-27 03:38:45 +00:00
if (unlikely(xa_is_zero(next)))
next = NULL;
if (mm_wr_locked)
vma_start_write(vma);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
unlink_anon_vmas(vma);
2024-05-21 23:43:21 +00:00
unlink_file_vma_batch_add(&vb, vma);
}
2024-05-21 23:43:21 +00:00
unlink_file_vma_batch_final(&vb);
free_pgd_range(tlb, addr, vma->vm_end,
floor, next ? next->vm_start : ceiling);
}
[PATCH] freepgt: free_pgtables use vma list Recent woes with some arches needing their own pgd_addr_end macro; and 4-level clear_page_range regression since 2.6.10's clear_page_tables; and its long-standing well-known inefficiency in searching throughout the higher-level page tables for those few entries to clear and free: all can be blamed on ignoring the list of vmas when we free page tables. Replace exit_mmap's clear_page_range of the total user address space by free_pgtables operating on the mm's vma list; unmap_region use it in the same way, giving floor and ceiling beyond which it may not free tables. This brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled, in which case latency fixes spoil unmap_vmas throughput). Beware: the do_mmap_pgoff driver failure case must now use unmap_region instead of zap_page_range, since a page table might have been allocated, and can only be freed while it is touched by some vma. Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted from the clear_page_range levels. (Most of free_pgtables' old code was actually for a non-existent case, prev not properly set up, dating from before hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we might want to add latency lockdrops later; but no attempt to do so yet, going by vma should itself reduce latency. But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful examination: put that off until a later patch of the series. What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma? And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that we need to do more than is done here - every PMD_SIZE ever occupied will be flushed, do we really have to flush every PGDIR_SIZE ever partially occupied? A shame to complicate it unnecessarily. Special thanks to David Miller for time spent repairing my ceilings. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 20:29:15 +00:00
vma = next;
mm: remove the vma linked list Replace any vm_next use with vma_find(). Update free_pgtables(), unmap_vmas(), and zap_page_range() to use the maple tree. Use the new free_pgtables() and unmap_vmas() in do_mas_align_munmap(). At the same time, alter the loop to be more compact. Now that free_pgtables() and unmap_vmas() take a maple tree as an argument, rearrange do_mas_align_munmap() to use the new tree to hold the vmas to remove. Remove __vma_link_list() and __vma_unlink_list() as they are exclusively used to update the linked list. Drop linked list update from __insert_vm_struct(). Rework validation of tree as it was depending on the linked list. [yang.lee@linux.alibaba.com: fix one kernel-doc comment] Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1949 Link: https://lkml.kernel.org/r/20220824021918.94116-1-yang.lee@linux.alibaba.comLink: https://lkml.kernel.org/r/20220906194824.2110408-69-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-06 19:49:06 +00:00
} while (vma);
}
void pmd_install(struct mm_struct *mm, pmd_t *pmd, pgtable_t *pte)
{
spinlock_t *ptl = pmd_lock(mm, pmd);
if (likely(pmd_none(*pmd))) { /* Has another populated it ? */
mm_inc_nr_ptes(mm);
mm: remove redundant smp_wmb() The smp_wmb() which is in the __pte_alloc() is used to ensure all ptes setup is visible before the pte is made visible to other CPUs by being put into page tables. We only need this when the pte is actually populated, so move it to pmd_install(). __pte_alloc_kernel(), __p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar to this case. We can also defer smp_wmb() to the place where the pmd entry is really populated by preallocated pte. There are two kinds of user of preallocated pte, one is filemap & finish_fault(), another is THP. The former does not need another smp_wmb() because the smp_wmb() has been done by pmd_install(). Fortunately, the latter also does not need another smp_wmb() because there is already a smp_wmb() before populating the new pte when the THP uses a preallocated pte to split a huge pmd. Link: https://lkml.kernel.org/r/20210901102722.47686-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:38:41 +00:00
/*
* Ensure all pte setup (eg. pte page lock and page clearing) are
* visible before the pte is made visible to other CPUs by being
* put into page tables.
*
* The other side of the story is the pointer chasing in the page
* table walking code (when walking the page table without locking;
* ie. most of the time). Fortunately, these data accesses consist
* of a chain of data-dependent loads, meaning most CPUs (alpha
* being the notable exception) will already guarantee loads are
* seen in-order. See the alpha page table accessors for the
* smp_rmb() barriers in page table walking code.
*/
smp_wmb(); /* Could be smp_wmb__xxx(before|after)_spin_lock */
pmd_populate(mm, pmd, *pte);
*pte = NULL;
}
spin_unlock(ptl);
}
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 23:28:34 +00:00
int __pte_alloc(struct mm_struct *mm, pmd_t *pmd)
{
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 23:28:34 +00:00
pgtable_t new = pte_alloc_one(mm);
if (!new)
return -ENOMEM;
pmd_install(mm, pmd, &new);
CONFIG_HIGHPTE vs. sub-page page tables. Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:22:04 +00:00
if (new)
pte_free(mm, new);
return 0;
}
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 23:28:34 +00:00
int __pte_alloc_kernel(pmd_t *pmd)
{
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 23:28:34 +00:00
pte_t *new = pte_alloc_one_kernel(&init_mm);
if (!new)
return -ENOMEM;
spin_lock(&init_mm.page_table_lock);
if (likely(pmd_none(*pmd))) { /* Has another populated it ? */
mm: remove redundant smp_wmb() The smp_wmb() which is in the __pte_alloc() is used to ensure all ptes setup is visible before the pte is made visible to other CPUs by being put into page tables. We only need this when the pte is actually populated, so move it to pmd_install(). __pte_alloc_kernel(), __p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar to this case. We can also defer smp_wmb() to the place where the pmd entry is really populated by preallocated pte. There are two kinds of user of preallocated pte, one is filemap & finish_fault(), another is THP. The former does not need another smp_wmb() because the smp_wmb() has been done by pmd_install(). Fortunately, the latter also does not need another smp_wmb() because there is already a smp_wmb() before populating the new pte when the THP uses a preallocated pte to split a huge pmd. Link: https://lkml.kernel.org/r/20210901102722.47686-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:38:41 +00:00
smp_wmb(); /* See comment in pmd_install() */
pmd_populate_kernel(&init_mm, pmd, new);
CONFIG_HIGHPTE vs. sub-page page tables. Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:22:04 +00:00
new = NULL;
}
spin_unlock(&init_mm.page_table_lock);
CONFIG_HIGHPTE vs. sub-page page tables. Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:22:04 +00:00
if (new)
pte_free_kernel(&init_mm, new);
return 0;
}
static inline void init_rss_vec(int *rss)
{
memset(rss, 0, sizeof(int) * NR_MM_COUNTERS);
}
static inline void add_mm_rss_vec(struct mm_struct *mm, int *rss)
{
int i;
for (i = 0; i < NR_MM_COUNTERS; i++)
if (rss[i])
add_mm_counter(mm, i, rss[i]);
}
2005-10-30 01:16:12 +00:00
/*
* This function is called to print an error when a bad pte
* is found. For example, we might have a PFN-mapped pte in
* a region that doesn't allow it.
2005-10-30 01:16:12 +00:00
*
* The calling function must still handle the error.
*/
badpage: replace page_remove_rmap Eeek and BUG Now that bad pages are kept out of circulation, there is no need for the infamous page_remove_rmap() BUG() - once that page is freed, its negative mapcount will issue a "Bad page state" message and the page won't be freed. Removing the BUG() allows more info, on subsequent pages, to be gathered. We do have more info about the page at this point than bad_page() can know - notably, what the pmd is, which might pinpoint something like low 64kB corruption - but page_remove_rmap() isn't given the address to find that. In practice, there is only one call to page_remove_rmap() which has ever reported anything, that from zap_pte_range() (usually on exit, sometimes on munmap). It has all the info, so remove page_remove_rmap()'s "Eeek" message and leave it all to zap_pte_range(). mm/memory.c already has a hardly used print_bad_pte() function, showing some of the appropriate info: extend it to show what we want for the rmap case: pte info, page info (when there is a page) and vma info to compare. zap_pte_range() already knows the pmd, but print_bad_pte() is easier to use if it works that out for itself. Some of this info is also shown in bad_page()'s "Bad page state" message. Keep them separate, but adjust them to match each other as far as possible. Say "Bad page map" in print_bad_pte(), and add a TAINT_BAD_PAGE there too. print_bad_pte() show current->comm unconditionally (though it should get repeated in the usually irrelevant stack trace): sorry, I misled Nick Piggin to make it conditional on vm_mm == current->mm, but current->mm is already NULL in the exit case. Usually current->comm is good, though exceptionally it may not be that of the mm (when "swapoff" for example). Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 22:40:08 +00:00
static void print_bad_pte(struct vm_area_struct *vma, unsigned long addr,
pte_t pte, struct page *page)
2005-10-30 01:16:12 +00:00
{
badpage: replace page_remove_rmap Eeek and BUG Now that bad pages are kept out of circulation, there is no need for the infamous page_remove_rmap() BUG() - once that page is freed, its negative mapcount will issue a "Bad page state" message and the page won't be freed. Removing the BUG() allows more info, on subsequent pages, to be gathered. We do have more info about the page at this point than bad_page() can know - notably, what the pmd is, which might pinpoint something like low 64kB corruption - but page_remove_rmap() isn't given the address to find that. In practice, there is only one call to page_remove_rmap() which has ever reported anything, that from zap_pte_range() (usually on exit, sometimes on munmap). It has all the info, so remove page_remove_rmap()'s "Eeek" message and leave it all to zap_pte_range(). mm/memory.c already has a hardly used print_bad_pte() function, showing some of the appropriate info: extend it to show what we want for the rmap case: pte info, page info (when there is a page) and vma info to compare. zap_pte_range() already knows the pmd, but print_bad_pte() is easier to use if it works that out for itself. Some of this info is also shown in bad_page()'s "Bad page state" message. Keep them separate, but adjust them to match each other as far as possible. Say "Bad page map" in print_bad_pte(), and add a TAINT_BAD_PAGE there too. print_bad_pte() show current->comm unconditionally (though it should get repeated in the usually irrelevant stack trace): sorry, I misled Nick Piggin to make it conditional on vm_mm == current->mm, but current->mm is already NULL in the exit case. Usually current->comm is good, though exceptionally it may not be that of the mm (when "swapoff" for example). Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 22:40:08 +00:00
pgd_t *pgd = pgd_offset(vma->vm_mm, addr);
p4d_t *p4d = p4d_offset(pgd, addr);
pud_t *pud = pud_offset(p4d, addr);
badpage: replace page_remove_rmap Eeek and BUG Now that bad pages are kept out of circulation, there is no need for the infamous page_remove_rmap() BUG() - once that page is freed, its negative mapcount will issue a "Bad page state" message and the page won't be freed. Removing the BUG() allows more info, on subsequent pages, to be gathered. We do have more info about the page at this point than bad_page() can know - notably, what the pmd is, which might pinpoint something like low 64kB corruption - but page_remove_rmap() isn't given the address to find that. In practice, there is only one call to page_remove_rmap() which has ever reported anything, that from zap_pte_range() (usually on exit, sometimes on munmap). It has all the info, so remove page_remove_rmap()'s "Eeek" message and leave it all to zap_pte_range(). mm/memory.c already has a hardly used print_bad_pte() function, showing some of the appropriate info: extend it to show what we want for the rmap case: pte info, page info (when there is a page) and vma info to compare. zap_pte_range() already knows the pmd, but print_bad_pte() is easier to use if it works that out for itself. Some of this info is also shown in bad_page()'s "Bad page state" message. Keep them separate, but adjust them to match each other as far as possible. Say "Bad page map" in print_bad_pte(), and add a TAINT_BAD_PAGE there too. print_bad_pte() show current->comm unconditionally (though it should get repeated in the usually irrelevant stack trace): sorry, I misled Nick Piggin to make it conditional on vm_mm == current->mm, but current->mm is already NULL in the exit case. Usually current->comm is good, though exceptionally it may not be that of the mm (when "swapoff" for example). Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 22:40:08 +00:00
pmd_t *pmd = pmd_offset(pud, addr);
struct address_space *mapping;
pgoff_t index;
static unsigned long resume;
static unsigned long nr_shown;
static unsigned long nr_unshown;
/*
* Allow a burst of 60 reports, then keep quiet for that minute;
* or allow a steady drip of one report per second.
*/
if (nr_shown == 60) {
if (time_before(jiffies, resume)) {
nr_unshown++;
return;
}
if (nr_unshown) {
pr_alert("BUG: Bad page map: %lu messages suppressed\n",
nr_unshown);
nr_unshown = 0;
}
nr_shown = 0;
}
if (nr_shown++ == 0)
resume = jiffies + 60 * HZ;
badpage: replace page_remove_rmap Eeek and BUG Now that bad pages are kept out of circulation, there is no need for the infamous page_remove_rmap() BUG() - once that page is freed, its negative mapcount will issue a "Bad page state" message and the page won't be freed. Removing the BUG() allows more info, on subsequent pages, to be gathered. We do have more info about the page at this point than bad_page() can know - notably, what the pmd is, which might pinpoint something like low 64kB corruption - but page_remove_rmap() isn't given the address to find that. In practice, there is only one call to page_remove_rmap() which has ever reported anything, that from zap_pte_range() (usually on exit, sometimes on munmap). It has all the info, so remove page_remove_rmap()'s "Eeek" message and leave it all to zap_pte_range(). mm/memory.c already has a hardly used print_bad_pte() function, showing some of the appropriate info: extend it to show what we want for the rmap case: pte info, page info (when there is a page) and vma info to compare. zap_pte_range() already knows the pmd, but print_bad_pte() is easier to use if it works that out for itself. Some of this info is also shown in bad_page()'s "Bad page state" message. Keep them separate, but adjust them to match each other as far as possible. Say "Bad page map" in print_bad_pte(), and add a TAINT_BAD_PAGE there too. print_bad_pte() show current->comm unconditionally (though it should get repeated in the usually irrelevant stack trace): sorry, I misled Nick Piggin to make it conditional on vm_mm == current->mm, but current->mm is already NULL in the exit case. Usually current->comm is good, though exceptionally it may not be that of the mm (when "swapoff" for example). Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 22:40:08 +00:00
mapping = vma->vm_file ? vma->vm_file->f_mapping : NULL;
index = linear_page_index(vma, addr);
pr_alert("BUG: Bad page map in process %s pte:%08llx pmd:%08llx\n",
current->comm,
(long long)pte_val(pte), (long long)pmd_val(*pmd));
if (page)
dump_page(page, "bad pte");
pr_alert("addr:%px vm_flags:%08lx anon_vma:%px mapping:%px index:%lx\n",
(void *)addr, vma->vm_flags, vma->anon_vma, mapping, index);
pr_alert("file:%pD fault:%ps mmap:%ps read_folio:%ps\n",
vma->vm_file,
vma->vm_ops ? vma->vm_ops->fault : NULL,
vma->vm_file ? vma->vm_file->f_op->mmap : NULL,
mapping ? mapping->a_ops->read_folio : NULL);
2005-10-30 01:16:12 +00:00
dump_stack();
add_taint(TAINT_BAD_PAGE, LOCKDEP_NOW_UNRELIABLE);
2005-10-30 01:16:12 +00:00
}
/*
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
* vm_normal_page -- This function gets the "struct page" associated with a pte.
*
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
* "Special" mappings do not wish to be associated with a "struct page" (either
* it doesn't exist, or it exists but they don't want to touch it). In this
* case, NULL is returned here. "Normal" mappings do have a struct page.
mm: introduce VM_MIXEDMAP This series introduces some important infrastructure work. The overall result is that: 1. We now support XIP backed filesystems using memory that have no struct page allocated to them. And patches 6 and 7 actually implement this for s390. This is pretty important in a number of cases. As far as I understand, in the case of virtualisation (eg. s390), each guest may mount a readonly copy of the same filesystem (eg. the distro). Currently, guests need to allocate struct pages for this image. So if you have 100 guests, you already need to allocate more memory for the struct pages than the size of the image. I think. (Carsten?) For other (eg. embedded) systems, you may have a very large non- volatile filesystem. If you have to have struct pages for this, then your RAM consumption will go up proportionally to fs size. Even though it is just a small proportion, the RAM can be much more costly eg in terms of power, so every KB less that Linux uses makes it more attractive to a lot of these guys. 2. VM_MIXEDMAP allows us to support mappings where you actually do want to refcount _some_ pages in the mapping, but not others, and support COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM filesystem in progress. Future iterations of this filesystem will most likely want to migrate pages between pagecache and XIP backing, which is where the requirement for mixed (some refcounted, some not) comes from. 3. pte_special also has a peripheral usage that I need for my lockless get_user_pages patch. That was shown to speed up "oltp" on db2 by 10% on a 2 socket system, which is kind of significant because they scrounge for months to try to find 0.1% improvement on these workloads. I'm hoping we might finally be faster than AIX on pSeries with this :). My reference to lockless get_user_pages is not meant to justify this patchset (which doesn't include lockless gup), but just to show that pte_special is not some s390 specific thing that should be hidden in arch code or xip code: I definitely want to use it on at least x86 and powerpc as well. This patch: Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in that it can support COW mappings of arbitrary ranges including ranges without struct page *and* ranges with a struct page that we actually want to refcount (PFNMAP can only support COW in those cases where the un-COW-ed translations are mapped linearly in the virtual address, and can only support non refcounted ranges). VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:12:58 +00:00
*
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
* There are 2 broad cases. Firstly, an architecture may define a pte_special()
* pte bit, in which case this function is trivial. Secondly, an architecture
* may not have a spare pte bit, which requires a more complicated scheme,
* described below.
*
* A raw VM_PFNMAP mapping (ie. one that is not COWed) is always considered a
* special mapping (even if there are underlying and valid "struct pages").
* COWed pages of a VM_PFNMAP are always normal.
*
mm: introduce VM_MIXEDMAP This series introduces some important infrastructure work. The overall result is that: 1. We now support XIP backed filesystems using memory that have no struct page allocated to them. And patches 6 and 7 actually implement this for s390. This is pretty important in a number of cases. As far as I understand, in the case of virtualisation (eg. s390), each guest may mount a readonly copy of the same filesystem (eg. the distro). Currently, guests need to allocate struct pages for this image. So if you have 100 guests, you already need to allocate more memory for the struct pages than the size of the image. I think. (Carsten?) For other (eg. embedded) systems, you may have a very large non- volatile filesystem. If you have to have struct pages for this, then your RAM consumption will go up proportionally to fs size. Even though it is just a small proportion, the RAM can be much more costly eg in terms of power, so every KB less that Linux uses makes it more attractive to a lot of these guys. 2. VM_MIXEDMAP allows us to support mappings where you actually do want to refcount _some_ pages in the mapping, but not others, and support COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM filesystem in progress. Future iterations of this filesystem will most likely want to migrate pages between pagecache and XIP backing, which is where the requirement for mixed (some refcounted, some not) comes from. 3. pte_special also has a peripheral usage that I need for my lockless get_user_pages patch. That was shown to speed up "oltp" on db2 by 10% on a 2 socket system, which is kind of significant because they scrounge for months to try to find 0.1% improvement on these workloads. I'm hoping we might finally be faster than AIX on pSeries with this :). My reference to lockless get_user_pages is not meant to justify this patchset (which doesn't include lockless gup), but just to show that pte_special is not some s390 specific thing that should be hidden in arch code or xip code: I definitely want to use it on at least x86 and powerpc as well. This patch: Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in that it can support COW mappings of arbitrary ranges including ranges without struct page *and* ranges with a struct page that we actually want to refcount (PFNMAP can only support COW in those cases where the un-COW-ed translations are mapped linearly in the virtual address, and can only support non refcounted ranges). VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:12:58 +00:00
* The way we recognize COWed pages within VM_PFNMAP mappings is through the
* rules set up by "remap_pfn_range()": the vma will have the VM_PFNMAP bit
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
* set, and the vm_pgoff will point to the first PFN mapped: thus every special
* mapping will always honor the rule
*
* pfn_of_page == vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT)
*
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
* And for normal mappings this is false.
*
* This restricts such mappings to be a linear translation from virtual address
* to pfn. To get around this restriction, we allow arbitrary mappings so long
* as the vma is not a COW mapping; in that case, we know that all ptes are
* special (because none can have been COWed).
mm: introduce VM_MIXEDMAP This series introduces some important infrastructure work. The overall result is that: 1. We now support XIP backed filesystems using memory that have no struct page allocated to them. And patches 6 and 7 actually implement this for s390. This is pretty important in a number of cases. As far as I understand, in the case of virtualisation (eg. s390), each guest may mount a readonly copy of the same filesystem (eg. the distro). Currently, guests need to allocate struct pages for this image. So if you have 100 guests, you already need to allocate more memory for the struct pages than the size of the image. I think. (Carsten?) For other (eg. embedded) systems, you may have a very large non- volatile filesystem. If you have to have struct pages for this, then your RAM consumption will go up proportionally to fs size. Even though it is just a small proportion, the RAM can be much more costly eg in terms of power, so every KB less that Linux uses makes it more attractive to a lot of these guys. 2. VM_MIXEDMAP allows us to support mappings where you actually do want to refcount _some_ pages in the mapping, but not others, and support COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM filesystem in progress. Future iterations of this filesystem will most likely want to migrate pages between pagecache and XIP backing, which is where the requirement for mixed (some refcounted, some not) comes from. 3. pte_special also has a peripheral usage that I need for my lockless get_user_pages patch. That was shown to speed up "oltp" on db2 by 10% on a 2 socket system, which is kind of significant because they scrounge for months to try to find 0.1% improvement on these workloads. I'm hoping we might finally be faster than AIX on pSeries with this :). My reference to lockless get_user_pages is not meant to justify this patchset (which doesn't include lockless gup), but just to show that pte_special is not some s390 specific thing that should be hidden in arch code or xip code: I definitely want to use it on at least x86 and powerpc as well. This patch: Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in that it can support COW mappings of arbitrary ranges including ranges without struct page *and* ranges with a struct page that we actually want to refcount (PFNMAP can only support COW in those cases where the un-COW-ed translations are mapped linearly in the virtual address, and can only support non refcounted ranges). VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:12:58 +00:00
*
*
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
* In order to support COW of arbitrary special mappings, we have VM_MIXEDMAP.
mm: introduce VM_MIXEDMAP This series introduces some important infrastructure work. The overall result is that: 1. We now support XIP backed filesystems using memory that have no struct page allocated to them. And patches 6 and 7 actually implement this for s390. This is pretty important in a number of cases. As far as I understand, in the case of virtualisation (eg. s390), each guest may mount a readonly copy of the same filesystem (eg. the distro). Currently, guests need to allocate struct pages for this image. So if you have 100 guests, you already need to allocate more memory for the struct pages than the size of the image. I think. (Carsten?) For other (eg. embedded) systems, you may have a very large non- volatile filesystem. If you have to have struct pages for this, then your RAM consumption will go up proportionally to fs size. Even though it is just a small proportion, the RAM can be much more costly eg in terms of power, so every KB less that Linux uses makes it more attractive to a lot of these guys. 2. VM_MIXEDMAP allows us to support mappings where you actually do want to refcount _some_ pages in the mapping, but not others, and support COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM filesystem in progress. Future iterations of this filesystem will most likely want to migrate pages between pagecache and XIP backing, which is where the requirement for mixed (some refcounted, some not) comes from. 3. pte_special also has a peripheral usage that I need for my lockless get_user_pages patch. That was shown to speed up "oltp" on db2 by 10% on a 2 socket system, which is kind of significant because they scrounge for months to try to find 0.1% improvement on these workloads. I'm hoping we might finally be faster than AIX on pSeries with this :). My reference to lockless get_user_pages is not meant to justify this patchset (which doesn't include lockless gup), but just to show that pte_special is not some s390 specific thing that should be hidden in arch code or xip code: I definitely want to use it on at least x86 and powerpc as well. This patch: Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in that it can support COW mappings of arbitrary ranges including ranges without struct page *and* ranges with a struct page that we actually want to refcount (PFNMAP can only support COW in those cases where the un-COW-ed translations are mapped linearly in the virtual address, and can only support non refcounted ranges). VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:12:58 +00:00
*
* VM_MIXEDMAP mappings can likewise contain memory with or without "struct
* page" backing, however the difference is that _all_ pages with a struct
* page (that is, those where pfn_valid is true) are refcounted and considered
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
* normal pages by the VM. The only exception are zeropages, which are
* *never* refcounted.
*
* The disadvantage is that pages are refcounted (which can be slower and
* simply not an option for some PFNMAP users). The advantage is that we
* don't have to follow the strict linearity rule of PFNMAP mappings in
* order to support COWable mappings.
mm: introduce VM_MIXEDMAP This series introduces some important infrastructure work. The overall result is that: 1. We now support XIP backed filesystems using memory that have no struct page allocated to them. And patches 6 and 7 actually implement this for s390. This is pretty important in a number of cases. As far as I understand, in the case of virtualisation (eg. s390), each guest may mount a readonly copy of the same filesystem (eg. the distro). Currently, guests need to allocate struct pages for this image. So if you have 100 guests, you already need to allocate more memory for the struct pages than the size of the image. I think. (Carsten?) For other (eg. embedded) systems, you may have a very large non- volatile filesystem. If you have to have struct pages for this, then your RAM consumption will go up proportionally to fs size. Even though it is just a small proportion, the RAM can be much more costly eg in terms of power, so every KB less that Linux uses makes it more attractive to a lot of these guys. 2. VM_MIXEDMAP allows us to support mappings where you actually do want to refcount _some_ pages in the mapping, but not others, and support COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM filesystem in progress. Future iterations of this filesystem will most likely want to migrate pages between pagecache and XIP backing, which is where the requirement for mixed (some refcounted, some not) comes from. 3. pte_special also has a peripheral usage that I need for my lockless get_user_pages patch. That was shown to speed up "oltp" on db2 by 10% on a 2 socket system, which is kind of significant because they scrounge for months to try to find 0.1% improvement on these workloads. I'm hoping we might finally be faster than AIX on pSeries with this :). My reference to lockless get_user_pages is not meant to justify this patchset (which doesn't include lockless gup), but just to show that pte_special is not some s390 specific thing that should be hidden in arch code or xip code: I definitely want to use it on at least x86 and powerpc as well. This patch: Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in that it can support COW mappings of arbitrary ranges including ranges without struct page *and* ranges with a struct page that we actually want to refcount (PFNMAP can only support COW in those cases where the un-COW-ed translations are mapped linearly in the virtual address, and can only support non refcounted ranges). VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:12:58 +00:00
*
*/
struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
pte_t pte)
{
unsigned long pfn = pte_pfn(pte);
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
if (IS_ENABLED(CONFIG_ARCH_HAS_PTE_SPECIAL)) {
x86,mm: fix pte_special versus pte_numa Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels: where zap_pte_range() checks page->mapping to see if PageAnon(page). Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access. Commit c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page. Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE). A hint that this was a problem was that c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special(). It still appears that this patch may be incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, that would make it pte_special(). This is side-stepped by the fact that NUMA hinting faults skipped PROT_NONE VMAs and there are no grounds where a NUMA hinting fault on a PROT_NONE VMA would be interesting. Fixes: c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: <stable@vger.kernel.org> [3.16] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29 22:18:44 +00:00
if (likely(!pte_special(pte)))
goto check_pfn;
if (vma->vm_ops && vma->vm_ops->find_special_page)
return vma->vm_ops->find_special_page(vma, addr);
mm: reinstate ZERO_PAGE KAMEZAWA Hiroyuki has observed customers of earlier kernels taking advantage of the ZERO_PAGE: which we stopped do_anonymous_page() from using in 2.6.24. And there were a couple of regression reports on LKML. Following suggestions from Linus, reinstate do_anonymous_page() use of the ZERO_PAGE; but this time avoid dirtying its struct page cacheline with (map)count updates - let vm_normal_page() regard it as abnormal. Use it only on arches which __HAVE_ARCH_PTE_SPECIAL (x86, s390, sh32, most powerpc): that's not essential, but minimizes additional branches (keeping them in the unlikely pte_special case); and incidentally excludes mips (some models of which needed eight colours of ZERO_PAGE to avoid costly exceptions). Don't be fanatical about avoiding ZERO_PAGE updates: get_user_pages() callers won't want to make exceptions for it, so increment its count there. Changes to mlock and migration? happily seems not needed. In most places it's quicker to check pfn than struct page address: prepare a __read_mostly zero_pfn for that. Does get_dump_page() still need its ZERO_PAGE check? probably not, but keep it anyway. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:03:30 +00:00
if (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
return NULL;
if (is_zero_pfn(pfn))
return NULL;
dax: remove VM_MIXEDMAP for fsdax and device dax This patch is reworked from an earlier patch that Dan has posted: https://patchwork.kernel.org/patch/10131727/ VM_MIXEDMAP is used by dax to direct mm paths like vm_normal_page() that the memory page it is dealing with is not typical memory from the linear map. The get_user_pages_fast() path, since it does not resolve the vma, is already using {pte,pmd}_devmap() as a stand-in for VM_MIXEDMAP, so we use that as a VM_MIXEDMAP replacement in some locations. In the cases where there is no pte to consult we fallback to using vma_is_dax() to detect the VM_MIXEDMAP special case. Now that we have explicit driver pfn_t-flag opt-in/opt-out for get_user_pages() support for DAX we can stop setting VM_MIXEDMAP. This also means we no longer need to worry about safely manipulating vm_flags in a future where we support dynamically changing the dax mode of a file. DAX should also now be supported with madvise_behavior(), vma_merge(), and copy_page_range(). This patch has been tested against ndctl unit test. It has also been tested against xfstests commit: 625515d using fake pmem created by memmap and no additional issues have been observed. Link: http://lkml.kernel.org/r/152847720311.55924.16999195879201817653.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:43:40 +00:00
if (pte_devmap(pte))
/*
* NOTE: New users of ZONE_DEVICE will not set pte_devmap()
* and will have refcounts incremented on their struct pages
* when they are inserted into PTEs, thus they are safe to
* return here. Legacy ZONE_DEVICE pages that set pte_devmap()
* do not have refcounts. Example of legacy ZONE_DEVICE is
* MEMORY_DEVICE_FS_DAX type in pmem or virtio_fs drivers.
*/
dax: remove VM_MIXEDMAP for fsdax and device dax This patch is reworked from an earlier patch that Dan has posted: https://patchwork.kernel.org/patch/10131727/ VM_MIXEDMAP is used by dax to direct mm paths like vm_normal_page() that the memory page it is dealing with is not typical memory from the linear map. The get_user_pages_fast() path, since it does not resolve the vma, is already using {pte,pmd}_devmap() as a stand-in for VM_MIXEDMAP, so we use that as a VM_MIXEDMAP replacement in some locations. In the cases where there is no pte to consult we fallback to using vma_is_dax() to detect the VM_MIXEDMAP special case. Now that we have explicit driver pfn_t-flag opt-in/opt-out for get_user_pages() support for DAX we can stop setting VM_MIXEDMAP. This also means we no longer need to worry about safely manipulating vm_flags in a future where we support dynamically changing the dax mode of a file. DAX should also now be supported with madvise_behavior(), vma_merge(), and copy_page_range(). This patch has been tested against ndctl unit test. It has also been tested against xfstests commit: 625515d using fake pmem created by memmap and no additional issues have been observed. Link: http://lkml.kernel.org/r/152847720311.55924.16999195879201817653.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:43:40 +00:00
return NULL;
print_bad_pte(vma, addr, pte, NULL);
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
return NULL;
}
/* !CONFIG_ARCH_HAS_PTE_SPECIAL case follows: */
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
mm: introduce VM_MIXEDMAP This series introduces some important infrastructure work. The overall result is that: 1. We now support XIP backed filesystems using memory that have no struct page allocated to them. And patches 6 and 7 actually implement this for s390. This is pretty important in a number of cases. As far as I understand, in the case of virtualisation (eg. s390), each guest may mount a readonly copy of the same filesystem (eg. the distro). Currently, guests need to allocate struct pages for this image. So if you have 100 guests, you already need to allocate more memory for the struct pages than the size of the image. I think. (Carsten?) For other (eg. embedded) systems, you may have a very large non- volatile filesystem. If you have to have struct pages for this, then your RAM consumption will go up proportionally to fs size. Even though it is just a small proportion, the RAM can be much more costly eg in terms of power, so every KB less that Linux uses makes it more attractive to a lot of these guys. 2. VM_MIXEDMAP allows us to support mappings where you actually do want to refcount _some_ pages in the mapping, but not others, and support COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM filesystem in progress. Future iterations of this filesystem will most likely want to migrate pages between pagecache and XIP backing, which is where the requirement for mixed (some refcounted, some not) comes from. 3. pte_special also has a peripheral usage that I need for my lockless get_user_pages patch. That was shown to speed up "oltp" on db2 by 10% on a 2 socket system, which is kind of significant because they scrounge for months to try to find 0.1% improvement on these workloads. I'm hoping we might finally be faster than AIX on pSeries with this :). My reference to lockless get_user_pages is not meant to justify this patchset (which doesn't include lockless gup), but just to show that pte_special is not some s390 specific thing that should be hidden in arch code or xip code: I definitely want to use it on at least x86 and powerpc as well. This patch: Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in that it can support COW mappings of arbitrary ranges including ranges without struct page *and* ranges with a struct page that we actually want to refcount (PFNMAP can only support COW in those cases where the un-COW-ed translations are mapped linearly in the virtual address, and can only support non refcounted ranges). VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:12:58 +00:00
if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) {
if (vma->vm_flags & VM_MIXEDMAP) {
if (!pfn_valid(pfn))
return NULL;
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
if (is_zero_pfn(pfn))
return NULL;
mm: introduce VM_MIXEDMAP This series introduces some important infrastructure work. The overall result is that: 1. We now support XIP backed filesystems using memory that have no struct page allocated to them. And patches 6 and 7 actually implement this for s390. This is pretty important in a number of cases. As far as I understand, in the case of virtualisation (eg. s390), each guest may mount a readonly copy of the same filesystem (eg. the distro). Currently, guests need to allocate struct pages for this image. So if you have 100 guests, you already need to allocate more memory for the struct pages than the size of the image. I think. (Carsten?) For other (eg. embedded) systems, you may have a very large non- volatile filesystem. If you have to have struct pages for this, then your RAM consumption will go up proportionally to fs size. Even though it is just a small proportion, the RAM can be much more costly eg in terms of power, so every KB less that Linux uses makes it more attractive to a lot of these guys. 2. VM_MIXEDMAP allows us to support mappings where you actually do want to refcount _some_ pages in the mapping, but not others, and support COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM filesystem in progress. Future iterations of this filesystem will most likely want to migrate pages between pagecache and XIP backing, which is where the requirement for mixed (some refcounted, some not) comes from. 3. pte_special also has a peripheral usage that I need for my lockless get_user_pages patch. That was shown to speed up "oltp" on db2 by 10% on a 2 socket system, which is kind of significant because they scrounge for months to try to find 0.1% improvement on these workloads. I'm hoping we might finally be faster than AIX on pSeries with this :). My reference to lockless get_user_pages is not meant to justify this patchset (which doesn't include lockless gup), but just to show that pte_special is not some s390 specific thing that should be hidden in arch code or xip code: I definitely want to use it on at least x86 and powerpc as well. This patch: Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in that it can support COW mappings of arbitrary ranges including ranges without struct page *and* ranges with a struct page that we actually want to refcount (PFNMAP can only support COW in those cases where the un-COW-ed translations are mapped linearly in the virtual address, and can only support non refcounted ranges). VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:12:58 +00:00
goto out;
} else {
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
unsigned long off;
off = (addr - vma->vm_start) >> PAGE_SHIFT;
mm: introduce VM_MIXEDMAP This series introduces some important infrastructure work. The overall result is that: 1. We now support XIP backed filesystems using memory that have no struct page allocated to them. And patches 6 and 7 actually implement this for s390. This is pretty important in a number of cases. As far as I understand, in the case of virtualisation (eg. s390), each guest may mount a readonly copy of the same filesystem (eg. the distro). Currently, guests need to allocate struct pages for this image. So if you have 100 guests, you already need to allocate more memory for the struct pages than the size of the image. I think. (Carsten?) For other (eg. embedded) systems, you may have a very large non- volatile filesystem. If you have to have struct pages for this, then your RAM consumption will go up proportionally to fs size. Even though it is just a small proportion, the RAM can be much more costly eg in terms of power, so every KB less that Linux uses makes it more attractive to a lot of these guys. 2. VM_MIXEDMAP allows us to support mappings where you actually do want to refcount _some_ pages in the mapping, but not others, and support COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM filesystem in progress. Future iterations of this filesystem will most likely want to migrate pages between pagecache and XIP backing, which is where the requirement for mixed (some refcounted, some not) comes from. 3. pte_special also has a peripheral usage that I need for my lockless get_user_pages patch. That was shown to speed up "oltp" on db2 by 10% on a 2 socket system, which is kind of significant because they scrounge for months to try to find 0.1% improvement on these workloads. I'm hoping we might finally be faster than AIX on pSeries with this :). My reference to lockless get_user_pages is not meant to justify this patchset (which doesn't include lockless gup), but just to show that pte_special is not some s390 specific thing that should be hidden in arch code or xip code: I definitely want to use it on at least x86 and powerpc as well. This patch: Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in that it can support COW mappings of arbitrary ranges including ranges without struct page *and* ranges with a struct page that we actually want to refcount (PFNMAP can only support COW in those cases where the un-COW-ed translations are mapped linearly in the virtual address, and can only support non refcounted ranges). VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:12:58 +00:00
if (pfn == vma->vm_pgoff + off)
return NULL;
if (!is_cow_mapping(vma->vm_flags))
return NULL;
}
}
x86,mm: fix pte_special versus pte_numa Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels: where zap_pte_range() checks page->mapping to see if PageAnon(page). Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access. Commit c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page. Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE). A hint that this was a problem was that c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special(). It still appears that this patch may be incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, that would make it pte_special(). This is side-stepped by the fact that NUMA hinting faults skipped PROT_NONE VMAs and there are no grounds where a NUMA hinting fault on a PROT_NONE VMA would be interesting. Fixes: c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: <stable@vger.kernel.org> [3.16] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29 22:18:44 +00:00
if (is_zero_pfn(pfn))
return NULL;
check_pfn:
if (unlikely(pfn > highest_memmap_pfn)) {
print_bad_pte(vma, addr, pte, NULL);
return NULL;
}
/*
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
* NOTE! We still have PageReserved() pages in the page tables.
* eg. VDSO mappings can cause them to exist.
*/
mm: introduce VM_MIXEDMAP This series introduces some important infrastructure work. The overall result is that: 1. We now support XIP backed filesystems using memory that have no struct page allocated to them. And patches 6 and 7 actually implement this for s390. This is pretty important in a number of cases. As far as I understand, in the case of virtualisation (eg. s390), each guest may mount a readonly copy of the same filesystem (eg. the distro). Currently, guests need to allocate struct pages for this image. So if you have 100 guests, you already need to allocate more memory for the struct pages than the size of the image. I think. (Carsten?) For other (eg. embedded) systems, you may have a very large non- volatile filesystem. If you have to have struct pages for this, then your RAM consumption will go up proportionally to fs size. Even though it is just a small proportion, the RAM can be much more costly eg in terms of power, so every KB less that Linux uses makes it more attractive to a lot of these guys. 2. VM_MIXEDMAP allows us to support mappings where you actually do want to refcount _some_ pages in the mapping, but not others, and support COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM filesystem in progress. Future iterations of this filesystem will most likely want to migrate pages between pagecache and XIP backing, which is where the requirement for mixed (some refcounted, some not) comes from. 3. pte_special also has a peripheral usage that I need for my lockless get_user_pages patch. That was shown to speed up "oltp" on db2 by 10% on a 2 socket system, which is kind of significant because they scrounge for months to try to find 0.1% improvement on these workloads. I'm hoping we might finally be faster than AIX on pSeries with this :). My reference to lockless get_user_pages is not meant to justify this patchset (which doesn't include lockless gup), but just to show that pte_special is not some s390 specific thing that should be hidden in arch code or xip code: I definitely want to use it on at least x86 and powerpc as well. This patch: Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in that it can support COW mappings of arbitrary ranges including ranges without struct page *and* ranges with a struct page that we actually want to refcount (PFNMAP can only support COW in those cases where the un-COW-ed translations are mapped linearly in the virtual address, and can only support non refcounted ranges). VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings). Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:12:58 +00:00
out:
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
VM_WARN_ON_ONCE(is_zero_pfn(pfn));
return pfn_to_page(pfn);
}
struct folio *vm_normal_folio(struct vm_area_struct *vma, unsigned long addr,
pte_t pte)
{
struct page *page = vm_normal_page(vma, addr, pte);
if (page)
return page_folio(page);
return NULL;
}
mm: provide vm_normal_(page|folio)_pmd() with CONFIG_PGTABLE_HAS_HUGE_LEAVES Patch series "mm: replace follow_page() by folio_walk". Looking into a way of moving the last folio_likely_mapped_shared() call in add_folio_for_migration() under the PTL, I found myself removing follow_page(). This paves the way for cleaning up all the FOLL_, follow_* terminology to just be called "GUP" nowadays. The new page table walker will lookup a mapped folio and return to the caller with the PTL held, such that the folio cannot get unmapped concurrently. Callers can then conditionally decide whether they really want to take a short-term folio reference or whether the can simply unlock the PTL and be done with it. folio_walk is similar to page_vma_mapped_walk(), except that we don't know the folio we want to walk to and that we are only walking to exactly one PTE/PMD/PUD. folio_walk provides access to the pte/pmd/pud (and the referenced folio page because things like KSM need that), however, as part of this series no page table modifications are performed by users. We might be able to convert some other walk_page_range() users that really only walk to one address, such as DAMON with damon_mkold_ops/damon_young_ops. It might make sense to extend folio_walk in the future to optionally fault in a folio (if applicable), such that we can replace some get_user_pages() users that really only want to lookup a single page/folio under PTL without unconditionally grabbing a folio reference. I have plans to extend the approach to a range walker that will try batching various page table entries (not just folio pages) to be a better replace for walk_page_range() -- and users will be able to opt in which type of page table entries they want to process -- but that will require more work and more thoughts. KSM seems to work just fine (ksm_functional_tests selftests) and move_pages seems to work (migration selftest). I tested the leaf implementation excessively using various hugetlb sizes (64K, 2M, 32M, 1G) on arm64 using move_pages and did some more testing on x86-64. Cross compiled on a bunch of architectures. This patch (of 11): We want to make use of vm_normal_page_pmd() in generic page table walking code where we might walk hugetlb folios that are mapped by PMDs even without CONFIG_TRANSPARENT_HUGEPAGE. So let's expose vm_normal_page_pmd() + vm_normal_folio_pmd() with CONFIG_PGTABLE_HAS_HUGE_LEAVES. Link: https://lkml.kernel.org/r/20240802155524.517137-1-david@redhat.com Link: https://lkml.kernel.org/r/20240802155524.517137-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:14 +00:00
#ifdef CONFIG_PGTABLE_HAS_HUGE_LEAVES
numa: fix /proc/<pid>/numa_maps for THP In gather_pte_stats() a THP pmd is cast into a pte, which is wrong because the layouts may differ depending on the architecture. On s390 this will lead to inaccurate numa_maps accounting in /proc because of misguided pte_present() and pte_dirty() checks on the fake pte. On other architectures pte_present() and pte_dirty() may work by chance, but there may be an issue with direct-access (dax) mappings w/o underlying struct pages when HAVE_PTE_SPECIAL is set and THP is available. In vm_normal_page() the fake pte will be checked with pte_special() and because there is no "special" bit in a pmd, this will always return false and the VM_PFNMAP | VM_MIXEDMAP checking will be skipped. On dax mappings w/o struct pages, an invalid struct page pointer would then be returned that can crash the kernel. This patch fixes the numa_maps THP handling by introducing new "_pmd" variants of the can_gather_numa_stats() and vm_normal_page() functions. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28 23:18:35 +00:00
struct page *vm_normal_page_pmd(struct vm_area_struct *vma, unsigned long addr,
pmd_t pmd)
{
unsigned long pfn = pmd_pfn(pmd);
/*
* There is no pmd_special() but there may be special pmds, e.g.
* in a direct-access (dax) mapping, so let's just replicate the
* !CONFIG_ARCH_HAS_PTE_SPECIAL case from vm_normal_page() here.
numa: fix /proc/<pid>/numa_maps for THP In gather_pte_stats() a THP pmd is cast into a pte, which is wrong because the layouts may differ depending on the architecture. On s390 this will lead to inaccurate numa_maps accounting in /proc because of misguided pte_present() and pte_dirty() checks on the fake pte. On other architectures pte_present() and pte_dirty() may work by chance, but there may be an issue with direct-access (dax) mappings w/o underlying struct pages when HAVE_PTE_SPECIAL is set and THP is available. In vm_normal_page() the fake pte will be checked with pte_special() and because there is no "special" bit in a pmd, this will always return false and the VM_PFNMAP | VM_MIXEDMAP checking will be skipped. On dax mappings w/o struct pages, an invalid struct page pointer would then be returned that can crash the kernel. This patch fixes the numa_maps THP handling by introducing new "_pmd" variants of the can_gather_numa_stats() and vm_normal_page() functions. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28 23:18:35 +00:00
*/
if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) {
if (vma->vm_flags & VM_MIXEDMAP) {
if (!pfn_valid(pfn))
return NULL;
goto out;
} else {
unsigned long off;
off = (addr - vma->vm_start) >> PAGE_SHIFT;
if (pfn == vma->vm_pgoff + off)
return NULL;
if (!is_cow_mapping(vma->vm_flags))
return NULL;
}
}
dax: remove VM_MIXEDMAP for fsdax and device dax This patch is reworked from an earlier patch that Dan has posted: https://patchwork.kernel.org/patch/10131727/ VM_MIXEDMAP is used by dax to direct mm paths like vm_normal_page() that the memory page it is dealing with is not typical memory from the linear map. The get_user_pages_fast() path, since it does not resolve the vma, is already using {pte,pmd}_devmap() as a stand-in for VM_MIXEDMAP, so we use that as a VM_MIXEDMAP replacement in some locations. In the cases where there is no pte to consult we fallback to using vma_is_dax() to detect the VM_MIXEDMAP special case. Now that we have explicit driver pfn_t-flag opt-in/opt-out for get_user_pages() support for DAX we can stop setting VM_MIXEDMAP. This also means we no longer need to worry about safely manipulating vm_flags in a future where we support dynamically changing the dax mode of a file. DAX should also now be supported with madvise_behavior(), vma_merge(), and copy_page_range(). This patch has been tested against ndctl unit test. It has also been tested against xfstests commit: 625515d using fake pmem created by memmap and no additional issues have been observed. Link: http://lkml.kernel.org/r/152847720311.55924.16999195879201817653.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:43:40 +00:00
if (pmd_devmap(pmd))
return NULL;
if (is_huge_zero_pmd(pmd))
numa: fix /proc/<pid>/numa_maps for THP In gather_pte_stats() a THP pmd is cast into a pte, which is wrong because the layouts may differ depending on the architecture. On s390 this will lead to inaccurate numa_maps accounting in /proc because of misguided pte_present() and pte_dirty() checks on the fake pte. On other architectures pte_present() and pte_dirty() may work by chance, but there may be an issue with direct-access (dax) mappings w/o underlying struct pages when HAVE_PTE_SPECIAL is set and THP is available. In vm_normal_page() the fake pte will be checked with pte_special() and because there is no "special" bit in a pmd, this will always return false and the VM_PFNMAP | VM_MIXEDMAP checking will be skipped. On dax mappings w/o struct pages, an invalid struct page pointer would then be returned that can crash the kernel. This patch fixes the numa_maps THP handling by introducing new "_pmd" variants of the can_gather_numa_stats() and vm_normal_page() functions. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28 23:18:35 +00:00
return NULL;
if (unlikely(pfn > highest_memmap_pfn))
return NULL;
/*
* NOTE! We still have PageReserved() pages in the page tables.
* eg. VDSO mappings can cause them to exist.
*/
out:
return pfn_to_page(pfn);
}
struct folio *vm_normal_folio_pmd(struct vm_area_struct *vma,
unsigned long addr, pmd_t pmd)
{
struct page *page = vm_normal_page_pmd(vma, addr, pmd);
if (page)
return page_folio(page);
return NULL;
}
numa: fix /proc/<pid>/numa_maps for THP In gather_pte_stats() a THP pmd is cast into a pte, which is wrong because the layouts may differ depending on the architecture. On s390 this will lead to inaccurate numa_maps accounting in /proc because of misguided pte_present() and pte_dirty() checks on the fake pte. On other architectures pte_present() and pte_dirty() may work by chance, but there may be an issue with direct-access (dax) mappings w/o underlying struct pages when HAVE_PTE_SPECIAL is set and THP is available. In vm_normal_page() the fake pte will be checked with pte_special() and because there is no "special" bit in a pmd, this will always return false and the VM_PFNMAP | VM_MIXEDMAP checking will be skipped. On dax mappings w/o struct pages, an invalid struct page pointer would then be returned that can crash the kernel. This patch fixes the numa_maps THP handling by introducing new "_pmd" variants of the can_gather_numa_stats() and vm_normal_page() functions. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28 23:18:35 +00:00
#endif
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
static void restore_exclusive_pte(struct vm_area_struct *vma,
struct page *page, unsigned long address,
pte_t *ptep)
{
struct folio *folio = page_folio(page);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_t orig_pte;
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
pte_t pte;
swp_entry_t entry;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
orig_pte = ptep_get(ptep);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
pte = pte_mkold(mk_pte(page, READ_ONCE(vma->vm_page_prot)));
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_soft_dirty(orig_pte))
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
pte = pte_mksoft_dirty(pte);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
entry = pte_to_swp_entry(orig_pte);
if (pte_swp_uffd_wp(orig_pte))
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
pte = pte_mkuffd_wp(pte);
else if (is_writable_device_exclusive_entry(entry))
pte = maybe_mkwrite(pte_mkdirty(pte), vma);
VM_BUG_ON_FOLIO(pte_write(pte) && (!folio_test_anon(folio) &&
PageAnonExclusive(page)), folio);
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
/*
* No need to take a page reference as one was already
* created when the swap entry was made.
*/
if (folio_test_anon(folio))
folio_add_anon_rmap_pte(folio, page, vma, address, RMAP_NONE);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
else
/*
* Currently device exclusive access only supports anonymous
* memory so the entry shouldn't point to a filebacked page.
*/
WARN_ON_ONCE(1);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
mm: change page type prior to adding page table entry Patch series "page table check", v3. Ensure that some memory corruptions are prevented by checking at the time of insertion of entries into user page tables that there is no illegal sharing. We have recently found a problem [1] that existed in kernel since 4.14. The problem was caused by broken page ref count and led to memory leaking from one process into another. The problem was accidentally detected by studying a dump of one process and noticing that one page contains memory that should not belong to this process. There are some other page->_refcount related problems that were recently fixed: [2], [3] which potentially could also lead to illegal sharing. In addition to hardening refcount [4] itself, this work is an attempt to prevent this class of memory corruption issues. It uses a simple state machine that is independent from regular MM logic to check for illegal sharing at time pages are inserted and removed from page tables. [1] https://lore.kernel.org/all/xr9335nxwc5y.fsf@gthelen2.svl.corp.google.com [2] https://lore.kernel.org/all/1582661774-30925-2-git-send-email-akaher@vmware.com [3] https://lore.kernel.org/all/20210622021423.154662-3-mike.kravetz@oracle.com [4] https://lore.kernel.org/all/20211221150140.988298-1-pasha.tatashin@soleen.com This patch (of 4): There are a few places where we first update the entry in the user page table, and later change the struct page to indicate that this is anonymous or file page. In most places, however, we first configure the page metadata and then insert entries into the page table. Page table check, will use the information from struct page to verify the type of entry is inserted. Change the order in all places to first update struct page, and later to update page table. This means that we first do calls that may change the type of page (anon or file): page_move_anon_rmap page_add_anon_rmap do_page_add_anon_rmap page_add_new_anon_rmap page_add_file_rmap hugepage_add_anon_rmap hugepage_add_new_anon_rmap And after that do calls that add entries to the page table: set_huge_pte_at set_pte_at Link: https://lkml.kernel.org/r/20211221154650.1047963-1-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20211221154650.1047963-2-pasha.tatashin@soleen.com Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Turner <pjt@google.com> Cc: Wei Xu <weixugc@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:06:29 +00:00
set_pte_at(vma->vm_mm, address, ptep, pte);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
/*
* No need to invalidate - it was non-present before. However
* secondary CPUs may have mappings that need invalidating.
*/
update_mmu_cache(vma, address, ptep);
}
/*
* Tries to restore an exclusive pte if the page lock can be acquired without
* sleeping.
*/
static int
try_restore_exclusive_pte(pte_t *src_pte, struct vm_area_struct *vma,
unsigned long addr)
{
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
swp_entry_t entry = pte_to_swp_entry(ptep_get(src_pte));
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
struct page *page = pfn_swap_entry_to_page(entry);
if (trylock_page(page)) {
restore_exclusive_pte(vma, page, addr, src_pte);
unlock_page(page);
return 0;
}
return -EBUSY;
}
/*
* copy one vm_area from one task to the other. Assumes the page tables
* already present in the new task to be cleared in the whole range
* covered by this vma.
*/
static unsigned long
copy_nonpresent_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
mm/userfaultfd: fix uffd-wp special cases for fork() We tried to do something similar in b569a1760782 ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") previously, but it's not doing it all right.. A few fixes around the code path: 1. We were referencing VM_UFFD_WP vm_flags on the _old_ vma rather than the new vma. That's overlooked in b569a1760782, so it won't work as expected. Thanks to the recent rework on fork code (7a4830c380f3a8b3), we can easily get the new vma now, so switch the checks to that. 2. Dropping the uffd-wp bit in copy_huge_pmd() could be wrong if the huge pmd is a migration huge pmd. When it happens, instead of using pmd_uffd_wp(), we should use pmd_swp_uffd_wp(). The fix is simply to handle them separately. 3. Forget to carry over uffd-wp bit for a write migration huge pmd entry. This also happens in copy_huge_pmd(), where we converted a write huge migration entry into a read one. 4. In copy_nonpresent_pte(), drop uffd-wp if necessary for swap ptes. 5. In copy_present_page() when COW is enforced when fork(), we also need to pass over the uffd-wp bit if VM_UFFD_WP is armed on the new vma, and when the pte to be copied has uffd-wp bit set. Remove the comment in copy_present_pte() about this. It won't help a huge lot to only comment there, but comment everywhere would be an overkill. Let's assume the commit messages would help. [peterx@redhat.com: fix a few thp pmd missing uffd-wp bit] Link: https://lkml.kernel.org/r/20210428225030.9708-4-peterx@redhat.com Link: https://lkml.kernel.org/r/20210428225030.9708-3-peterx@redhat.com Fixes: b569a1760782f ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joe Perches <joe@perches.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Wang Qing <wangqing@vivo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:49:02 +00:00
pte_t *dst_pte, pte_t *src_pte, struct vm_area_struct *dst_vma,
struct vm_area_struct *src_vma, unsigned long addr, int *rss)
{
mm/userfaultfd: fix uffd-wp special cases for fork() We tried to do something similar in b569a1760782 ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") previously, but it's not doing it all right.. A few fixes around the code path: 1. We were referencing VM_UFFD_WP vm_flags on the _old_ vma rather than the new vma. That's overlooked in b569a1760782, so it won't work as expected. Thanks to the recent rework on fork code (7a4830c380f3a8b3), we can easily get the new vma now, so switch the checks to that. 2. Dropping the uffd-wp bit in copy_huge_pmd() could be wrong if the huge pmd is a migration huge pmd. When it happens, instead of using pmd_uffd_wp(), we should use pmd_swp_uffd_wp(). The fix is simply to handle them separately. 3. Forget to carry over uffd-wp bit for a write migration huge pmd entry. This also happens in copy_huge_pmd(), where we converted a write huge migration entry into a read one. 4. In copy_nonpresent_pte(), drop uffd-wp if necessary for swap ptes. 5. In copy_present_page() when COW is enforced when fork(), we also need to pass over the uffd-wp bit if VM_UFFD_WP is armed on the new vma, and when the pte to be copied has uffd-wp bit set. Remove the comment in copy_present_pte() about this. It won't help a huge lot to only comment there, but comment everywhere would be an overkill. Let's assume the commit messages would help. [peterx@redhat.com: fix a few thp pmd missing uffd-wp bit] Link: https://lkml.kernel.org/r/20210428225030.9708-4-peterx@redhat.com Link: https://lkml.kernel.org/r/20210428225030.9708-3-peterx@redhat.com Fixes: b569a1760782f ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joe Perches <joe@perches.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Wang Qing <wangqing@vivo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:49:02 +00:00
unsigned long vm_flags = dst_vma->vm_flags;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_t orig_pte = ptep_get(src_pte);
pte_t pte = orig_pte;
struct folio *folio;
struct page *page;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
swp_entry_t entry = pte_to_swp_entry(orig_pte);
if (likely(!non_swap_entry(entry))) {
if (swap_duplicate(entry) < 0)
return -EIO;
/* make sure dst_mm is on swapoff's mmlist. */
if (unlikely(list_empty(&dst_mm->mmlist))) {
spin_lock(&mmlist_lock);
if (list_empty(&dst_mm->mmlist))
list_add(&dst_mm->mmlist,
&src_mm->mmlist);
spin_unlock(&mmlist_lock);
}
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
/* Mark the swap entry as shared. */
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_exclusive(orig_pte)) {
pte = pte_swp_clear_exclusive(orig_pte);
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
set_pte_at(src_mm, addr, src_pte, pte);
}
rss[MM_SWAPENTS]++;
} else if (is_migration_entry(entry)) {
folio = pfn_swap_entry_folio(entry);
rss[mm_counter(folio)]++;
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
if (!is_readable_migration_entry(entry) &&
is_cow_mapping(vm_flags)) {
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
/*
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
* COW mappings require pages in both parent and child
* to be set to read. A previously exclusive entry is
* now shared.
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
*/
entry = make_readable_migration_entry(
swp_offset(entry));
pte = swp_entry_to_pte(entry);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_soft_dirty(orig_pte))
pte = pte_swp_mksoft_dirty(pte);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_uffd_wp(orig_pte))
pte = pte_swp_mkuffd_wp(pte);
set_pte_at(src_mm, addr, src_pte, pte);
}
} else if (is_device_private_entry(entry)) {
mm: remove special swap entry functions Patch series "Add support for SVM atomics in Nouveau", v11. Introduction ============ Some devices have features such as atomic PTE bits that can be used to implement atomic access to system memory. To support atomic operations to a shared virtual memory page such a device needs access to that page which is exclusive of the CPU. This series introduces a mechanism to temporarily unmap pages granting exclusive access to a device. These changes are required to support OpenCL atomic operations in Nouveau to shared virtual memory (SVM) regions allocated with the CL_MEM_SVM_ATOMICS clSVMAlloc flag. A more complete description of the OpenCL SVM feature is available at https://www.khronos.org/registry/OpenCL/specs/3.0-unified/html/ OpenCL_API.html#_shared_virtual_memory . Implementation ============== Exclusive device access is implemented by adding a new swap entry type (SWAP_DEVICE_EXCLUSIVE) which is similar to a migration entry. The main difference is that on fault the original entry is immediately restored by the fault handler instead of waiting. Restoring the entry triggers calls to MMU notifers which allows a device driver to revoke the atomic access permission from the GPU prior to the CPU finalising the entry. Patches ======= Patches 1 & 2 refactor existing migration and device private entry functions. Patches 3 & 4 rework try_to_unmap_one() by splitting out unrelated functionality into separate functions - try_to_migrate_one() and try_to_munlock_one(). Patch 5 renames some existing code but does not introduce functionality. Patch 6 is a small clean-up to swap entry handling in copy_pte_range(). Patch 7 contains the bulk of the implementation for device exclusive memory. Patch 8 contains some additions to the HMM selftests to ensure everything works as expected. Patch 9 is a cleanup for the Nouveau SVM implementation. Patch 10 contains the implementation of atomic access for the Nouveau driver. Testing ======= This has been tested with upstream Mesa 21.1.0 and a simple OpenCL program which checks that GPU atomic accesses to system memory are atomic. Without this series the test fails as there is no way of write-protecting the page mapping which results in the device clobbering CPU writes. For reference the test is available at https://ozlabs.org/~apopple/opencl_svm_atomics/ Further testing has been performed by adding support for testing exclusive access to the hmm-tests kselftests. This patch (of 10): Remove multiple similar inline functions for dealing with different types of special swap entries. Both migration and device private swap entries use the swap offset to store a pfn. Instead of multiple inline functions to obtain a struct page for each swap entry type use a common function pfn_swap_entry_to_page(). Also open-code the various entry_to_pfn() functions as this results is shorter code that is easier to understand. Link: https://lkml.kernel.org/r/20210616105937.23201-1-apopple@nvidia.com Link: https://lkml.kernel.org/r/20210616105937.23201-2-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:06 +00:00
page = pfn_swap_entry_to_page(entry);
folio = page_folio(page);
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
/*
* Update rss count even for unaddressable pages, as
* they should treated just like normal pages in this
* respect.
*
* We will likely want to have some new rss counters
* for unaddressable pages, at some point. But for now
* keep things as they are.
*/
folio_get(folio);
rss[mm_counter(folio)]++;
mm/rmap: split page_dup_rmap() into page_dup_file_rmap() and page_try_dup_anon_rmap() ... and move the special check for pinned pages into page_try_dup_anon_rmap() to prepare for tracking exclusive anonymous pages via a new pageflag, clearing it only after making sure that there are no GUP pins on the anonymous page. We really only care about pins on anonymous pages, because they are prone to getting replaced in the COW handler once mapped R/O. For !anon pages in cow-mappings (!VM_SHARED && VM_MAYWRITE) we shouldn't really care about that, at least not that I could come up with an example. Let's drop the is_cow_mapping() check from page_needs_cow_for_dma(), as we know we're dealing with anonymous pages. Also, drop the handling of pinned pages from copy_huge_pud() and add a comment if ever supporting anonymous pages on the PUD level. This is a preparation for tracking exclusivity of anonymous pages in the rmap code, and disallowing marking a page shared (-> failing to duplicate) if there are GUP pins on a page. Link: https://lkml.kernel.org/r/20220428083441.37290-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:43 +00:00
/* Cannot fail as these pages cannot get pinned. */
folio_try_dup_anon_rmap_pte(folio, page, src_vma);
/*
* We do not preserve soft-dirty information, because so
* far, checkpoint/restore is the only feature that
* requires that. And checkpoint/restore does not work
* when a device driver is involved (you cannot easily
* save and restore device driver state).
*/
if (is_writable_device_private_entry(entry) &&
is_cow_mapping(vm_flags)) {
entry = make_readable_device_private_entry(
swp_offset(entry));
pte = swp_entry_to_pte(entry);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_uffd_wp(orig_pte))
pte = pte_swp_mkuffd_wp(pte);
set_pte_at(src_mm, addr, src_pte, pte);
}
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
} else if (is_device_exclusive_entry(entry)) {
/*
* Make device exclusive entries present by restoring the
* original entry then copying as for a present pte. Device
* exclusive entries currently only support private writable
* (ie. COW) mappings.
*/
VM_BUG_ON(!is_cow_mapping(src_vma->vm_flags));
if (try_restore_exclusive_pte(src_pte, src_vma, addr))
return -EBUSY;
return -ENOENT;
} else if (is_pte_marker_entry(entry)) {
mm: make PTE_MARKER_SWAPIN_ERROR more general Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD", v4. This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4 for a detailed description of the feature. This patch (of 8): Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement UFFDIO_POISON, so make some various preparations for that: First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be confusing since we're going to re-use it for something not really related to swap. This can be particularly confusing for things like hugetlbfs, which doesn't support swap whatsoever. Also rename some various helper functions. Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap. But, since we're going to re-use it, we want it to go ahead and copy it just like non-hugetlbfs memory does today. Since the code to do this is more complicated now, pull it out into a helper which can be re-used in both places. While we're at it, also make it slightly more explicit in its handling of e.g. uffd wp markers. For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't matter, e.g. a userspace program would receive a SIGBUS either way. But for UFFDIO_POISON, this change will let KVM guests get an MCE out of the box, instead of giving a SIGBUS to the hypervisor and requiring it to somehow inject an MCE. Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today because the lack of swap support means we'll never end up with such a PTE anyway, but this behavior will be needed once such entries *can* show up via UFFDIO_POISON. Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
pte_marker marker = copy_pte_marker(entry, dst_vma);
if (marker)
set_pte_at(dst_mm, addr, dst_pte,
make_pte_marker(marker));
return 0;
}
mm/userfaultfd: fix uffd-wp special cases for fork() We tried to do something similar in b569a1760782 ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") previously, but it's not doing it all right.. A few fixes around the code path: 1. We were referencing VM_UFFD_WP vm_flags on the _old_ vma rather than the new vma. That's overlooked in b569a1760782, so it won't work as expected. Thanks to the recent rework on fork code (7a4830c380f3a8b3), we can easily get the new vma now, so switch the checks to that. 2. Dropping the uffd-wp bit in copy_huge_pmd() could be wrong if the huge pmd is a migration huge pmd. When it happens, instead of using pmd_uffd_wp(), we should use pmd_swp_uffd_wp(). The fix is simply to handle them separately. 3. Forget to carry over uffd-wp bit for a write migration huge pmd entry. This also happens in copy_huge_pmd(), where we converted a write huge migration entry into a read one. 4. In copy_nonpresent_pte(), drop uffd-wp if necessary for swap ptes. 5. In copy_present_page() when COW is enforced when fork(), we also need to pass over the uffd-wp bit if VM_UFFD_WP is armed on the new vma, and when the pte to be copied has uffd-wp bit set. Remove the comment in copy_present_pte() about this. It won't help a huge lot to only comment there, but comment everywhere would be an overkill. Let's assume the commit messages would help. [peterx@redhat.com: fix a few thp pmd missing uffd-wp bit] Link: https://lkml.kernel.org/r/20210428225030.9708-4-peterx@redhat.com Link: https://lkml.kernel.org/r/20210428225030.9708-3-peterx@redhat.com Fixes: b569a1760782f ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joe Perches <joe@perches.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Wang Qing <wangqing@vivo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:49:02 +00:00
if (!userfaultfd_wp(dst_vma))
pte = pte_swp_clear_uffd_wp(pte);
set_pte_at(dst_mm, addr, dst_pte, pte);
return 0;
}
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
/*
mm/memory: slightly simplify copy_present_pte() Let's move the pinning check into the caller, to simplify return code logic and prepare for further changes: relocating the page_needs_cow_for_dma() into rmap handling code. While at it, remove the unused pte parameter and simplify the comments a bit. No functional change intended. Link: https://lkml.kernel.org/r/20220428083441.37290-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:42 +00:00
* Copy a present and normal page.
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
*
mm/memory: slightly simplify copy_present_pte() Let's move the pinning check into the caller, to simplify return code logic and prepare for further changes: relocating the page_needs_cow_for_dma() into rmap handling code. While at it, remove the unused pte parameter and simplify the comments a bit. No functional change intended. Link: https://lkml.kernel.org/r/20220428083441.37290-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:42 +00:00
* NOTE! The usual case is that this isn't required;
* instead, the caller can just increase the page refcount
* and re-use the pte the traditional way.
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
*
* And if we need a pre-allocated page but don't yet have
* one, return a negative error to let the preallocation
* code know so that it can do so outside the page table
* lock.
*/
static inline int
copy_present_page(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma,
pte_t *dst_pte, pte_t *src_pte, unsigned long addr, int *rss,
struct folio **prealloc, struct page *page)
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
{
struct folio *new_folio;
mm/memory: slightly simplify copy_present_pte() Let's move the pinning check into the caller, to simplify return code logic and prepare for further changes: relocating the page_needs_cow_for_dma() into rmap handling code. While at it, remove the unused pte parameter and simplify the comments a bit. No functional change intended. Link: https://lkml.kernel.org/r/20220428083441.37290-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:42 +00:00
pte_t pte;
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
new_folio = *prealloc;
if (!new_folio)
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
return -EAGAIN;
/*
* We have a prealloc page, all good! Take it
* over and copy the page & arm it.
*/
*prealloc = NULL;
copy_user_highpage(&new_folio->page, page, addr, src_vma);
__folio_mark_uptodate(new_folio);
mm: extend rmap flags arguments for folio_add_new_anon_rmap Patch series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()", v2. This patchset is preparatory work for mTHP swapin. folio_add_new_anon_rmap() assumes that new anon rmaps are always exclusive. However, this assumption doesn’t hold true for cases like do_swap_page(), where a new anon might be added to the swapcache and is not necessarily exclusive. The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to handle both exclusive and non-exclusive new anon folios. The do_swap_page() function is updated to use this extended API with rmap flags. Consequently, all new anon folios now consistently use folio_add_new_anon_rmap(). The special case for !folio_test_anon() in __folio_add_anon_rmap() can be safely removed. In conclusion, new anon folios always use folio_add_new_anon_rmap(), regardless of exclusivity. Old anon folios continue to use __folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and folio_add_anon_rmap_ptes(). This patch (of 3): In the case of a swap-in, a new anonymous folio is not necessarily exclusive. This patch updates the rmap flags to allow a new anonymous folio to be treated as either exclusive or non-exclusive. To maintain the existing behavior, we always use EXCLUSIVE as the default setting. [akpm@linux-foundation.org: cleanup and constifications per David and akpm] [v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()] Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com [v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap] Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: Shuai Yuan <yuanshuai@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-17 23:11:35 +00:00
folio_add_new_anon_rmap(new_folio, dst_vma, addr, RMAP_EXCLUSIVE);
folio_add_lru_vma(new_folio, dst_vma);
rss[MM_ANONPAGES]++;
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
/* All done, just insert the new page copy in the child */
pte = mk_pte(&new_folio->page, dst_vma->vm_page_prot);
pte = maybe_mkwrite(pte_mkdirty(pte), dst_vma);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (userfaultfd_pte_wp(dst_vma, ptep_get(src_pte)))
mm/userfaultfd: fix uffd-wp special cases for fork() We tried to do something similar in b569a1760782 ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") previously, but it's not doing it all right.. A few fixes around the code path: 1. We were referencing VM_UFFD_WP vm_flags on the _old_ vma rather than the new vma. That's overlooked in b569a1760782, so it won't work as expected. Thanks to the recent rework on fork code (7a4830c380f3a8b3), we can easily get the new vma now, so switch the checks to that. 2. Dropping the uffd-wp bit in copy_huge_pmd() could be wrong if the huge pmd is a migration huge pmd. When it happens, instead of using pmd_uffd_wp(), we should use pmd_swp_uffd_wp(). The fix is simply to handle them separately. 3. Forget to carry over uffd-wp bit for a write migration huge pmd entry. This also happens in copy_huge_pmd(), where we converted a write huge migration entry into a read one. 4. In copy_nonpresent_pte(), drop uffd-wp if necessary for swap ptes. 5. In copy_present_page() when COW is enforced when fork(), we also need to pass over the uffd-wp bit if VM_UFFD_WP is armed on the new vma, and when the pte to be copied has uffd-wp bit set. Remove the comment in copy_present_pte() about this. It won't help a huge lot to only comment there, but comment everywhere would be an overkill. Let's assume the commit messages would help. [peterx@redhat.com: fix a few thp pmd missing uffd-wp bit] Link: https://lkml.kernel.org/r/20210428225030.9708-4-peterx@redhat.com Link: https://lkml.kernel.org/r/20210428225030.9708-3-peterx@redhat.com Fixes: b569a1760782f ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joe Perches <joe@perches.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Wang Qing <wangqing@vivo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:49:02 +00:00
/* Uffd-wp needs to be delivered to dest pte as well */
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 20:15:33 +00:00
pte = pte_mkuffd_wp(pte);
set_pte_at(dst_vma->vm_mm, addr, dst_pte, pte);
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
return 0;
}
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
static __always_inline void __copy_present_ptes(struct vm_area_struct *dst_vma,
struct vm_area_struct *src_vma, pte_t *dst_pte, pte_t *src_pte,
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
pte_t pte, unsigned long addr, int nr)
{
struct mm_struct *src_mm = src_vma->vm_mm;
/* If it's a COW mapping, write protect it both processes. */
if (is_cow_mapping(src_vma->vm_flags) && pte_write(pte)) {
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
wrprotect_ptes(src_mm, addr, src_pte, nr);
pte = pte_wrprotect(pte);
}
/* If it's a shared mapping, mark it clean in the child. */
if (src_vma->vm_flags & VM_SHARED)
pte = pte_mkclean(pte);
pte = pte_mkold(pte);
if (!userfaultfd_wp(dst_vma))
pte = pte_clear_uffd_wp(pte);
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
set_ptes(dst_vma->vm_mm, addr, dst_pte, pte, nr);
}
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
/*
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
* Copy one present PTE, trying to batch-process subsequent PTEs that map
* consecutive pages of the same folio by copying them as well.
*
* Returns -EAGAIN if one preallocated page is required to copy the next PTE.
* Otherwise, returns the number of copied PTEs (at least 1).
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
*/
static inline int
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
copy_present_ptes(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma,
pte_t *dst_pte, pte_t *src_pte, pte_t pte, unsigned long addr,
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
int max_nr, int *rss, struct folio **prealloc)
{
struct page *page;
struct folio *folio;
bool any_writable;
mm/memory: ignore dirty/accessed/soft-dirty bits in folio_pte_batch() Let's always ignore the accessed/young bit: we'll always mark the PTE as old in our child process during fork, and upcoming users will similarly not care. Ignore the dirty bit only if we don't want to duplicate the dirty bit into the child process during fork. Maybe, we could just set all PTEs in the child dirty if any PTE is dirty. For now, let's keep the behavior unchanged, this can be optimized later if required. Ignore the soft-dirty bit only if the bit doesn't have any meaning in the src vma, and similarly won't have any in the copied dst vma. For now, we won't bother with the uffd-wp bit. Link: https://lkml.kernel.org/r/20240129124649.189745-15-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:48 +00:00
fpb_t flags = 0;
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
int err, nr;
page = vm_normal_page(src_vma, addr, pte);
if (unlikely(!page))
goto copy_pte;
folio = page_folio(page);
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
/*
* If we likely have to copy, just don't bother with batching. Make
* sure that the common "small folio" case is as fast as possible
* by keeping the batching logic separate.
*/
if (unlikely(!*prealloc && folio_test_large(folio) && max_nr != 1)) {
mm/memory: ignore dirty/accessed/soft-dirty bits in folio_pte_batch() Let's always ignore the accessed/young bit: we'll always mark the PTE as old in our child process during fork, and upcoming users will similarly not care. Ignore the dirty bit only if we don't want to duplicate the dirty bit into the child process during fork. Maybe, we could just set all PTEs in the child dirty if any PTE is dirty. For now, let's keep the behavior unchanged, this can be optimized later if required. Ignore the soft-dirty bit only if the bit doesn't have any meaning in the src vma, and similarly won't have any in the copied dst vma. For now, we won't bother with the uffd-wp bit. Link: https://lkml.kernel.org/r/20240129124649.189745-15-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:48 +00:00
if (src_vma->vm_flags & VM_SHARED)
flags |= FPB_IGNORE_DIRTY;
if (!vma_soft_dirty_enabled(src_vma))
flags |= FPB_IGNORE_SOFT_DIRTY;
nr = folio_pte_batch(folio, addr, src_pte, pte, max_nr, flags,
&any_writable, NULL, NULL);
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
folio_ref_add(folio, nr);
if (folio_test_anon(folio)) {
if (unlikely(folio_try_dup_anon_rmap_ptes(folio, page,
nr, src_vma))) {
folio_ref_sub(folio, nr);
return -EAGAIN;
}
rss[MM_ANONPAGES] += nr;
VM_WARN_ON_FOLIO(PageAnonExclusive(page), folio);
} else {
folio_dup_file_rmap_ptes(folio, page, nr);
rss[mm_counter_file(folio)] += nr;
}
if (any_writable)
pte = pte_mkwrite(pte, src_vma);
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
__copy_present_ptes(dst_vma, src_vma, dst_pte, src_pte, pte,
addr, nr);
return nr;
}
folio_get(folio);
if (folio_test_anon(folio)) {
mm/memory: slightly simplify copy_present_pte() Let's move the pinning check into the caller, to simplify return code logic and prepare for further changes: relocating the page_needs_cow_for_dma() into rmap handling code. While at it, remove the unused pte parameter and simplify the comments a bit. No functional change intended. Link: https://lkml.kernel.org/r/20220428083441.37290-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:42 +00:00
/*
* If this page may have been pinned by the parent process,
* copy the page immediately for the child so that we'll always
* guarantee the pinned page won't be randomly replaced in the
* future.
*/
if (unlikely(folio_try_dup_anon_rmap_pte(folio, page, src_vma))) {
/* Page may be pinned, we have to copy. */
folio_put(folio);
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
err = copy_present_page(dst_vma, src_vma, dst_pte, src_pte,
addr, rss, prealloc, page);
return err ? err : 1;
mm/rmap: split page_dup_rmap() into page_dup_file_rmap() and page_try_dup_anon_rmap() ... and move the special check for pinned pages into page_try_dup_anon_rmap() to prepare for tracking exclusive anonymous pages via a new pageflag, clearing it only after making sure that there are no GUP pins on the anonymous page. We really only care about pins on anonymous pages, because they are prone to getting replaced in the COW handler once mapped R/O. For !anon pages in cow-mappings (!VM_SHARED && VM_MAYWRITE) we shouldn't really care about that, at least not that I could come up with an example. Let's drop the is_cow_mapping() check from page_needs_cow_for_dma(), as we know we're dealing with anonymous pages. Also, drop the handling of pinned pages from copy_huge_pud() and add a comment if ever supporting anonymous pages on the PUD level. This is a preparation for tracking exclusivity of anonymous pages in the rmap code, and disallowing marking a page shared (-> failing to duplicate) if there are GUP pins on a page. Link: https://lkml.kernel.org/r/20220428083441.37290-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:43 +00:00
}
rss[MM_ANONPAGES]++;
VM_WARN_ON_FOLIO(PageAnonExclusive(page), folio);
} else {
folio_dup_file_rmap_pte(folio, page);
rss[mm_counter_file(folio)]++;
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
}
copy_pte:
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
__copy_present_ptes(dst_vma, src_vma, dst_pte, src_pte, pte, addr, 1);
return 1;
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
}
static inline struct folio *folio_prealloc(struct mm_struct *src_mm,
struct vm_area_struct *vma, unsigned long addr, bool need_zero)
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
{
struct folio *new_folio;
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
if (need_zero)
new_folio = vma_alloc_zeroed_movable_folio(vma, addr);
else
new_folio = vma_alloc_folio(GFP_HIGHUSER_MOVABLE, 0, vma,
addr, false);
if (!new_folio)
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
return NULL;
if (mem_cgroup_charge(new_folio, src_mm, GFP_KERNEL)) {
folio_put(new_folio);
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
return NULL;
}
folio_throttle_swaprate(new_folio, GFP_KERNEL);
return new_folio;
}
static int
copy_pte_range(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma,
pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long addr,
unsigned long end)
{
struct mm_struct *dst_mm = dst_vma->vm_mm;
struct mm_struct *src_mm = src_vma->vm_mm;
pte_t *orig_src_pte, *orig_dst_pte;
pte_t *src_pte, *dst_pte;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_t ptent;
spinlock_t *src_ptl, *dst_ptl;
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
int progress, max_nr, ret = 0;
int rss[NR_MM_COUNTERS];
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
swp_entry_t entry = (swp_entry_t){0};
struct folio *prealloc = NULL;
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
int nr;
again:
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
progress = 0;
init_rss_vec(rss);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
/*
* copy_pmd_range()'s prior pmd_none_or_clear_bad(src_pmd), and the
* error handling here, assume that exclusive mmap_lock on dst and src
* protects anon from unexpected THP transitions; with shmem and file
* protected by mmap_lock-less collapse skipping areas with anon_vma
* (whereas vma_needs_copy() skips areas without anon_vma). A rework
* can remove such assumptions later, but this is good enough for now.
*/
dst_pte = pte_alloc_map_lock(dst_mm, dst_pmd, addr, &dst_ptl);
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
if (!dst_pte) {
ret = -ENOMEM;
goto out;
}
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
src_pte = pte_offset_map_nolock(src_mm, src_pmd, addr, &src_ptl);
if (!src_pte) {
pte_unmap_unlock(dst_pte, dst_ptl);
/* ret == 0 */
goto out;
}
spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
orig_src_pte = src_pte;
orig_dst_pte = dst_pte;
arch_enter_lazy_mmu_mode();
do {
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
nr = 1;
/*
* We are holding two locks at this point - either of them
* could generate latencies in another task on another CPU.
*/
if (progress >= 32) {
progress = 0;
if (need_resched() ||
spin_needbreak(src_ptl) || spin_needbreak(dst_ptl))
break;
}
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
ptent = ptep_get(src_pte);
if (pte_none(ptent)) {
progress++;
continue;
}
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (unlikely(!pte_present(ptent))) {
ret = copy_nonpresent_pte(dst_mm, src_mm,
dst_pte, src_pte,
dst_vma, src_vma,
addr, rss);
if (ret == -EIO) {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
entry = pte_to_swp_entry(ptep_get(src_pte));
break;
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
} else if (ret == -EBUSY) {
break;
} else if (!ret) {
progress += 8;
continue;
}
ptent = ptep_get(src_pte);
VM_WARN_ON_ONCE(!pte_present(ptent));
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
/*
* Device exclusive entry restored, continue by copying
* the now present pte.
*/
WARN_ON_ONCE(ret != -ENOENT);
}
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
/* copy_present_ptes() will clear `*prealloc' if consumed */
max_nr = (end - addr) / PAGE_SIZE;
ret = copy_present_ptes(dst_vma, src_vma, dst_pte, src_pte,
ptent, addr, max_nr, rss, &prealloc);
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
/*
* If we need a pre-allocated page for this pte, drop the
* locks, allocate, and try again.
*/
if (unlikely(ret == -EAGAIN))
break;
if (unlikely(prealloc)) {
/*
* pre-alloc page cannot be reused by next time so as
* to strictly follow mempolicy (e.g., alloc_page_vma()
* will allocate page according to address). This
* could only happen if one pinned pte changed.
*/
folio_put(prealloc);
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
prealloc = NULL;
}
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
nr = ret;
progress += 8 * nr;
} while (dst_pte += nr, src_pte += nr, addr += PAGE_SIZE * nr,
addr != end);
arch_leave_lazy_mmu_mode();
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
pte_unmap_unlock(orig_src_pte, src_ptl);
add_mm_rss_vec(dst_mm, rss);
pte_unmap_unlock(orig_dst_pte, dst_ptl);
cond_resched();
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
if (ret == -EIO) {
VM_WARN_ON_ONCE(!entry.val);
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
if (add_swap_count_continuation(entry, GFP_KERNEL) < 0) {
ret = -ENOMEM;
goto out;
}
entry.val = 0;
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
} else if (ret == -EBUSY) {
goto out;
} else if (ret == -EAGAIN) {
prealloc = folio_prealloc(src_mm, src_vma, addr, false);
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
if (!prealloc)
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
return -ENOMEM;
mm/memory: optimize fork() with PTE-mapped THP Let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio, and all other PTE bits besides the PFNs are equal. We will optimize folio_pte_batch() separately, to ignore selected PTE bits. This patch is based on work by Ryan Roberts. Use __always_inline for __copy_present_ptes() and keep the handling for single PTEs completely separate from the multi-PTE case: we really want the compiler to optimize for the single-PTE case with small folios, to not degrade performance. Note that PTE batching will never exceed a single page table and will always stay within VMA boundaries. Further, processing PTE-mapped THP that maybe pinned and have PageAnonExclusive set on at least one subpage should work as expected, but there is room for improvement: We will repeatedly (1) detect a PTE batch (2) detect that we have to copy a page (3) fall back and allocate a single page to copy a single page. For now we won't care as pinned pages are a corner case, and we should rather look into maintaining only a single PageAnonExclusive bit for large folios. Link: https://lkml.kernel.org/r/20240129124649.189745-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King (Oracle) <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-29 12:46:47 +00:00
} else if (ret < 0) {
VM_WARN_ON_ONCE(1);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
/* We've captured and resolved the error. Reset, try again. */
ret = 0;
if (addr != end)
goto again;
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
out:
if (unlikely(prealloc))
folio_put(prealloc);
mm: Do early cow for pinned pages during fork() for ptes This allows copy_pte_range() to do early cow if the pages were pinned on the source mm. Currently we don't have an accurate way to know whether a page is pinned or not. The only thing we have is page_maybe_dma_pinned(). However that's good enough for now. Especially, with the newly added mm->has_pinned flag to make sure we won't affect processes that never pinned any pages. It would be easier if we can do GFP_KERNEL allocation within copy_one_pte(). Unluckily, we can't because we're with the page table locks held for both the parent and child processes. So the page allocation needs to be done outside copy_one_pte(). Some trick is there in copy_present_pte(), majorly the wrprotect trick to block concurrent fast-gup. Comments in the function should explain better in place. Oleg Nesterov reported a (probably harmless) bug during review that we didn't reset entry.val properly in copy_pte_range() so that potentially there's chance to call add_swap_count_continuation() multiple times on the same swp entry. However that should be harmless since even if it happens, the same function (add_swap_count_continuation()) will return directly noticing that there're enough space for the swp counter. So instead of a standalone stable patch, it is touched up in this patch directly. Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25 22:25:59 +00:00
return ret;
}
static inline int
copy_pmd_range(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma,
pud_t *dst_pud, pud_t *src_pud, unsigned long addr,
unsigned long end)
{
struct mm_struct *dst_mm = dst_vma->vm_mm;
struct mm_struct *src_mm = src_vma->vm_mm;
pmd_t *src_pmd, *dst_pmd;
unsigned long next;
dst_pmd = pmd_alloc(dst_mm, dst_pud, addr);
if (!dst_pmd)
return -ENOMEM;
src_pmd = pmd_offset(src_pud, addr);
do {
next = pmd_addr_end(addr, end);
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
if (is_swap_pmd(*src_pmd) || pmd_trans_huge(*src_pmd)
|| pmd_devmap(*src_pmd)) {
thp: transparent hugepage core Lately I've been working to make KVM use hugepages transparently without the usual restrictions of hugetlbfs. Some of the restrictions I'd like to see removed: 1) hugepages have to be swappable or the guest physical memory remains locked in RAM and can't be paged out to swap 2) if a hugepage allocation fails, regular pages should be allocated instead and mixed in the same vma without any failure and without userland noticing 3) if some task quits and more hugepages become available in the buddy, guest physical memory backed by regular pages should be relocated on hugepages automatically in regions under madvise(MADV_HUGEPAGE) (ideally event driven by waking up the kernel deamon if the order=HPAGE_PMD_SHIFT-PAGE_SHIFT list becomes not null) 4) avoidance of reservation and maximization of use of hugepages whenever possible. Reservation (needed to avoid runtime fatal faliures) may be ok for 1 machine with 1 database with 1 database cache with 1 database cache size known at boot time. It's definitely not feasible with a virtualization hypervisor usage like RHEV-H that runs an unknown number of virtual machines with an unknown size of each virtual machine with an unknown amount of pagecache that could be potentially useful in the host for guest not using O_DIRECT (aka cache=off). hugepages in the virtualization hypervisor (and also in the guest!) are much more important than in a regular host not using virtualization, becasue with NPT/EPT they decrease the tlb-miss cacheline accesses from 24 to 19 in case only the hypervisor uses transparent hugepages, and they decrease the tlb-miss cacheline accesses from 19 to 15 in case both the linux hypervisor and the linux guest both uses this patch (though the guest will limit the addition speedup to anonymous regions only for now...). Even more important is that the tlb miss handler is much slower on a NPT/EPT guest than for a regular shadow paging or no-virtualization scenario. So maximizing the amount of virtual memory cached by the TLB pays off significantly more with NPT/EPT than without (even if there would be no significant speedup in the tlb-miss runtime). The first (and more tedious) part of this work requires allowing the VM to handle anonymous hugepages mixed with regular pages transparently on regular anonymous vmas. This is what this patch tries to achieve in the least intrusive possible way. We want hugepages and hugetlb to be used in a way so that all applications can benefit without changes (as usual we leverage the KVM virtualization design: by improving the Linux VM at large, KVM gets the performance boost too). The most important design choice is: always fallback to 4k allocation if the hugepage allocation fails! This is the _very_ opposite of some large pagecache patches that failed with -EIO back then if a 64k (or similar) allocation failed... Second important decision (to reduce the impact of the feature on the existing pagetable handling code) is that at any time we can split an hugepage into 512 regular pages and it has to be done with an operation that can't fail. This way the reliability of the swapping isn't decreased (no need to allocate memory when we are short on memory to swap) and it's trivial to plug a split_huge_page* one-liner where needed without polluting the VM. Over time we can teach mprotect, mremap and friends to handle pmd_trans_huge natively without calling split_huge_page*. The fact it can't fail isn't just for swap: if split_huge_page would return -ENOMEM (instead of the current void) we'd need to rollback the mprotect from the middle of it (ideally including undoing the split_vma) which would be a big change and in the very wrong direction (it'd likely be simpler not to call split_huge_page at all and to teach mprotect and friends to handle hugepages instead of rolling them back from the middle). In short the very value of split_huge_page is that it can't fail. The collapsing and madvise(MADV_HUGEPAGE) part will remain separated and incremental and it'll just be an "harmless" addition later if this initial part is agreed upon. It also should be noted that locking-wise replacing regular pages with hugepages is going to be very easy if compared to what I'm doing below in split_huge_page, as it will only happen when page_count(page) matches page_mapcount(page) if we can take the PG_lock and mmap_sem in write mode. collapse_huge_page will be a "best effort" that (unlike split_huge_page) can fail at the minimal sign of trouble and we can try again later. collapse_huge_page will be similar to how KSM works and the madvise(MADV_HUGEPAGE) will work similar to madvise(MADV_MERGEABLE). The default I like is that transparent hugepages are used at page fault time. This can be changed with /sys/kernel/mm/transparent_hugepage/enabled. The control knob can be set to three values "always", "madvise", "never" which mean respectively that hugepages are always used, or only inside madvise(MADV_HUGEPAGE) regions, or never used. /sys/kernel/mm/transparent_hugepage/defrag instead controls if the hugepage allocation should defrag memory aggressively "always", only inside "madvise" regions, or "never". The pmd_trans_splitting/pmd_trans_huge locking is very solid. The put_page (from get_user_page users that can't use mmu notifier like O_DIRECT) that runs against a __split_huge_page_refcount instead was a pain to serialize in a way that would result always in a coherent page count for both tail and head. I think my locking solution with a compound_lock taken only after the page_first is valid and is still a PageHead should be safe but it surely needs review from SMP race point of view. In short there is no current existing way to serialize the O_DIRECT final put_page against split_huge_page_refcount so I had to invent a new one (O_DIRECT loses knowledge on the mapping status by the time gup_fast returns so...). And I didn't want to impact all gup/gup_fast users for now, maybe if we change the gup interface substantially we can avoid this locking, I admit I didn't think too much about it because changing the gup unpinning interface would be invasive. If we ignored O_DIRECT we could stick to the existing compound refcounting code, by simply adding a get_user_pages_fast_flags(foll_flags) where KVM (and any other mmu notifier user) would call it without FOLL_GET (and if FOLL_GET isn't set we'd just BUG_ON if nobody registered itself in the current task mmu notifier list yet). But O_DIRECT is fundamental for decent performance of virtualized I/O on fast storage so we can't avoid it to solve the race of put_page against split_huge_page_refcount to achieve a complete hugepage feature for KVM. Swap and oom works fine (well just like with regular pages ;). MMU notifier is handled transparently too, with the exception of the young bit on the pmd, that didn't have a range check but I think KVM will be fine because the whole point of hugepages is that EPT/NPT will also use a huge pmd when they notice gup returns pages with PageCompound set, so they won't care of a range and there's just the pmd young bit to check in that case. NOTE: in some cases if the L2 cache is small, this may slowdown and waste memory during COWs because 4M of memory are accessed in a single fault instead of 8k (the payoff is that after COW the program can run faster). So we might want to switch the copy_huge_page (and clear_huge_page too) to not temporal stores. I also extensively researched ways to avoid this cache trashing with a full prefault logic that would cow in 8k/16k/32k/64k up to 1M (I can send those patches that fully implemented prefault) but I concluded they're not worth it and they add an huge additional complexity and they remove all tlb benefits until the full hugepage has been faulted in, to save a little bit of memory and some cache during app startup, but they still don't improve substantially the cache-trashing during startup if the prefault happens in >4k chunks. One reason is that those 4k pte entries copied are still mapped on a perfectly cache-colored hugepage, so the trashing is the worst one can generate in those copies (cow of 4k page copies aren't so well colored so they trashes less, but again this results in software running faster after the page fault). Those prefault patches allowed things like a pte where post-cow pages were local 4k regular anon pages and the not-yet-cowed pte entries were pointing in the middle of some hugepage mapped read-only. If it doesn't payoff substantially with todays hardware it will payoff even less in the future with larger l2 caches, and the prefault logic would blot the VM a lot. If one is emebdded transparent_hugepage can be disabled during boot with sysfs or with the boot commandline parameter transparent_hugepage=0 (or transparent_hugepage=2 to restrict hugepages inside madvise regions) that will ensure not a single hugepage is allocated at boot time. It is simple enough to just disable transparent hugepage globally and let transparent hugepages be allocated selectively by applications in the MADV_HUGEPAGE region (both at page fault time, and if enabled with the collapse_huge_page too through the kernel daemon). This patch supports only hugepages mapped in the pmd, archs that have smaller hugepages will not fit in this patch alone. Also some archs like power have certain tlb limits that prevents mixing different page size in the same regions so they will not fit in this framework that requires "graceful fallback" to basic PAGE_SIZE in case of physical memory fragmentation. hugetlbfs remains a perfect fit for those because its software limits happen to match the hardware limits. hugetlbfs also remains a perfect fit for hugepage sizes like 1GByte that cannot be hoped to be found not fragmented after a certain system uptime and that would be very expensive to defragment with relocation, so requiring reservation. hugetlbfs is the "reservation way", the point of transparent hugepages is not to have any reservation at all and maximizing the use of cache and hugepages at all times automatically. Some performance result: vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largep ages3 memset page fault 1566023 memset tlb miss 453854 memset second tlb miss 453321 random access tlb miss 41635 random access second tlb miss 41658 vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largepages3 memset page fault 1566471 memset tlb miss 453375 memset second tlb miss 453320 random access tlb miss 41636 random access second tlb miss 41637 vmx andrea # ./largepages3 memset page fault 1566642 memset tlb miss 453417 memset second tlb miss 453313 random access tlb miss 41630 random access second tlb miss 41647 vmx andrea # ./largepages3 memset page fault 1566872 memset tlb miss 453418 memset second tlb miss 453315 random access tlb miss 41618 random access second tlb miss 41659 vmx andrea # echo 0 > /proc/sys/vm/transparent_hugepage vmx andrea # ./largepages3 memset page fault 2182476 memset tlb miss 460305 memset second tlb miss 460179 random access tlb miss 44483 random access second tlb miss 44186 vmx andrea # ./largepages3 memset page fault 2182791 memset tlb miss 460742 memset second tlb miss 459962 random access tlb miss 43981 random access second tlb miss 43988 ============ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/time.h> #define SIZE (3UL*1024*1024*1024) int main() { char *p = malloc(SIZE), *p2; struct timeval before, after; gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset page fault %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); return 0; } ============ Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 23:46:52 +00:00
int err;
VM_BUG_ON_VMA(next-addr != HPAGE_PMD_SIZE, src_vma);
mm/userfaultfd: fix uffd-wp special cases for fork() We tried to do something similar in b569a1760782 ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") previously, but it's not doing it all right.. A few fixes around the code path: 1. We were referencing VM_UFFD_WP vm_flags on the _old_ vma rather than the new vma. That's overlooked in b569a1760782, so it won't work as expected. Thanks to the recent rework on fork code (7a4830c380f3a8b3), we can easily get the new vma now, so switch the checks to that. 2. Dropping the uffd-wp bit in copy_huge_pmd() could be wrong if the huge pmd is a migration huge pmd. When it happens, instead of using pmd_uffd_wp(), we should use pmd_swp_uffd_wp(). The fix is simply to handle them separately. 3. Forget to carry over uffd-wp bit for a write migration huge pmd entry. This also happens in copy_huge_pmd(), where we converted a write huge migration entry into a read one. 4. In copy_nonpresent_pte(), drop uffd-wp if necessary for swap ptes. 5. In copy_present_page() when COW is enforced when fork(), we also need to pass over the uffd-wp bit if VM_UFFD_WP is armed on the new vma, and when the pte to be copied has uffd-wp bit set. Remove the comment in copy_present_pte() about this. It won't help a huge lot to only comment there, but comment everywhere would be an overkill. Let's assume the commit messages would help. [peterx@redhat.com: fix a few thp pmd missing uffd-wp bit] Link: https://lkml.kernel.org/r/20210428225030.9708-4-peterx@redhat.com Link: https://lkml.kernel.org/r/20210428225030.9708-3-peterx@redhat.com Fixes: b569a1760782f ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork") Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joe Perches <joe@perches.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Wang Qing <wangqing@vivo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:49:02 +00:00
err = copy_huge_pmd(dst_mm, src_mm, dst_pmd, src_pmd,
addr, dst_vma, src_vma);
thp: transparent hugepage core Lately I've been working to make KVM use hugepages transparently without the usual restrictions of hugetlbfs. Some of the restrictions I'd like to see removed: 1) hugepages have to be swappable or the guest physical memory remains locked in RAM and can't be paged out to swap 2) if a hugepage allocation fails, regular pages should be allocated instead and mixed in the same vma without any failure and without userland noticing 3) if some task quits and more hugepages become available in the buddy, guest physical memory backed by regular pages should be relocated on hugepages automatically in regions under madvise(MADV_HUGEPAGE) (ideally event driven by waking up the kernel deamon if the order=HPAGE_PMD_SHIFT-PAGE_SHIFT list becomes not null) 4) avoidance of reservation and maximization of use of hugepages whenever possible. Reservation (needed to avoid runtime fatal faliures) may be ok for 1 machine with 1 database with 1 database cache with 1 database cache size known at boot time. It's definitely not feasible with a virtualization hypervisor usage like RHEV-H that runs an unknown number of virtual machines with an unknown size of each virtual machine with an unknown amount of pagecache that could be potentially useful in the host for guest not using O_DIRECT (aka cache=off). hugepages in the virtualization hypervisor (and also in the guest!) are much more important than in a regular host not using virtualization, becasue with NPT/EPT they decrease the tlb-miss cacheline accesses from 24 to 19 in case only the hypervisor uses transparent hugepages, and they decrease the tlb-miss cacheline accesses from 19 to 15 in case both the linux hypervisor and the linux guest both uses this patch (though the guest will limit the addition speedup to anonymous regions only for now...). Even more important is that the tlb miss handler is much slower on a NPT/EPT guest than for a regular shadow paging or no-virtualization scenario. So maximizing the amount of virtual memory cached by the TLB pays off significantly more with NPT/EPT than without (even if there would be no significant speedup in the tlb-miss runtime). The first (and more tedious) part of this work requires allowing the VM to handle anonymous hugepages mixed with regular pages transparently on regular anonymous vmas. This is what this patch tries to achieve in the least intrusive possible way. We want hugepages and hugetlb to be used in a way so that all applications can benefit without changes (as usual we leverage the KVM virtualization design: by improving the Linux VM at large, KVM gets the performance boost too). The most important design choice is: always fallback to 4k allocation if the hugepage allocation fails! This is the _very_ opposite of some large pagecache patches that failed with -EIO back then if a 64k (or similar) allocation failed... Second important decision (to reduce the impact of the feature on the existing pagetable handling code) is that at any time we can split an hugepage into 512 regular pages and it has to be done with an operation that can't fail. This way the reliability of the swapping isn't decreased (no need to allocate memory when we are short on memory to swap) and it's trivial to plug a split_huge_page* one-liner where needed without polluting the VM. Over time we can teach mprotect, mremap and friends to handle pmd_trans_huge natively without calling split_huge_page*. The fact it can't fail isn't just for swap: if split_huge_page would return -ENOMEM (instead of the current void) we'd need to rollback the mprotect from the middle of it (ideally including undoing the split_vma) which would be a big change and in the very wrong direction (it'd likely be simpler not to call split_huge_page at all and to teach mprotect and friends to handle hugepages instead of rolling them back from the middle). In short the very value of split_huge_page is that it can't fail. The collapsing and madvise(MADV_HUGEPAGE) part will remain separated and incremental and it'll just be an "harmless" addition later if this initial part is agreed upon. It also should be noted that locking-wise replacing regular pages with hugepages is going to be very easy if compared to what I'm doing below in split_huge_page, as it will only happen when page_count(page) matches page_mapcount(page) if we can take the PG_lock and mmap_sem in write mode. collapse_huge_page will be a "best effort" that (unlike split_huge_page) can fail at the minimal sign of trouble and we can try again later. collapse_huge_page will be similar to how KSM works and the madvise(MADV_HUGEPAGE) will work similar to madvise(MADV_MERGEABLE). The default I like is that transparent hugepages are used at page fault time. This can be changed with /sys/kernel/mm/transparent_hugepage/enabled. The control knob can be set to three values "always", "madvise", "never" which mean respectively that hugepages are always used, or only inside madvise(MADV_HUGEPAGE) regions, or never used. /sys/kernel/mm/transparent_hugepage/defrag instead controls if the hugepage allocation should defrag memory aggressively "always", only inside "madvise" regions, or "never". The pmd_trans_splitting/pmd_trans_huge locking is very solid. The put_page (from get_user_page users that can't use mmu notifier like O_DIRECT) that runs against a __split_huge_page_refcount instead was a pain to serialize in a way that would result always in a coherent page count for both tail and head. I think my locking solution with a compound_lock taken only after the page_first is valid and is still a PageHead should be safe but it surely needs review from SMP race point of view. In short there is no current existing way to serialize the O_DIRECT final put_page against split_huge_page_refcount so I had to invent a new one (O_DIRECT loses knowledge on the mapping status by the time gup_fast returns so...). And I didn't want to impact all gup/gup_fast users for now, maybe if we change the gup interface substantially we can avoid this locking, I admit I didn't think too much about it because changing the gup unpinning interface would be invasive. If we ignored O_DIRECT we could stick to the existing compound refcounting code, by simply adding a get_user_pages_fast_flags(foll_flags) where KVM (and any other mmu notifier user) would call it without FOLL_GET (and if FOLL_GET isn't set we'd just BUG_ON if nobody registered itself in the current task mmu notifier list yet). But O_DIRECT is fundamental for decent performance of virtualized I/O on fast storage so we can't avoid it to solve the race of put_page against split_huge_page_refcount to achieve a complete hugepage feature for KVM. Swap and oom works fine (well just like with regular pages ;). MMU notifier is handled transparently too, with the exception of the young bit on the pmd, that didn't have a range check but I think KVM will be fine because the whole point of hugepages is that EPT/NPT will also use a huge pmd when they notice gup returns pages with PageCompound set, so they won't care of a range and there's just the pmd young bit to check in that case. NOTE: in some cases if the L2 cache is small, this may slowdown and waste memory during COWs because 4M of memory are accessed in a single fault instead of 8k (the payoff is that after COW the program can run faster). So we might want to switch the copy_huge_page (and clear_huge_page too) to not temporal stores. I also extensively researched ways to avoid this cache trashing with a full prefault logic that would cow in 8k/16k/32k/64k up to 1M (I can send those patches that fully implemented prefault) but I concluded they're not worth it and they add an huge additional complexity and they remove all tlb benefits until the full hugepage has been faulted in, to save a little bit of memory and some cache during app startup, but they still don't improve substantially the cache-trashing during startup if the prefault happens in >4k chunks. One reason is that those 4k pte entries copied are still mapped on a perfectly cache-colored hugepage, so the trashing is the worst one can generate in those copies (cow of 4k page copies aren't so well colored so they trashes less, but again this results in software running faster after the page fault). Those prefault patches allowed things like a pte where post-cow pages were local 4k regular anon pages and the not-yet-cowed pte entries were pointing in the middle of some hugepage mapped read-only. If it doesn't payoff substantially with todays hardware it will payoff even less in the future with larger l2 caches, and the prefault logic would blot the VM a lot. If one is emebdded transparent_hugepage can be disabled during boot with sysfs or with the boot commandline parameter transparent_hugepage=0 (or transparent_hugepage=2 to restrict hugepages inside madvise regions) that will ensure not a single hugepage is allocated at boot time. It is simple enough to just disable transparent hugepage globally and let transparent hugepages be allocated selectively by applications in the MADV_HUGEPAGE region (both at page fault time, and if enabled with the collapse_huge_page too through the kernel daemon). This patch supports only hugepages mapped in the pmd, archs that have smaller hugepages will not fit in this patch alone. Also some archs like power have certain tlb limits that prevents mixing different page size in the same regions so they will not fit in this framework that requires "graceful fallback" to basic PAGE_SIZE in case of physical memory fragmentation. hugetlbfs remains a perfect fit for those because its software limits happen to match the hardware limits. hugetlbfs also remains a perfect fit for hugepage sizes like 1GByte that cannot be hoped to be found not fragmented after a certain system uptime and that would be very expensive to defragment with relocation, so requiring reservation. hugetlbfs is the "reservation way", the point of transparent hugepages is not to have any reservation at all and maximizing the use of cache and hugepages at all times automatically. Some performance result: vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largep ages3 memset page fault 1566023 memset tlb miss 453854 memset second tlb miss 453321 random access tlb miss 41635 random access second tlb miss 41658 vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largepages3 memset page fault 1566471 memset tlb miss 453375 memset second tlb miss 453320 random access tlb miss 41636 random access second tlb miss 41637 vmx andrea # ./largepages3 memset page fault 1566642 memset tlb miss 453417 memset second tlb miss 453313 random access tlb miss 41630 random access second tlb miss 41647 vmx andrea # ./largepages3 memset page fault 1566872 memset tlb miss 453418 memset second tlb miss 453315 random access tlb miss 41618 random access second tlb miss 41659 vmx andrea # echo 0 > /proc/sys/vm/transparent_hugepage vmx andrea # ./largepages3 memset page fault 2182476 memset tlb miss 460305 memset second tlb miss 460179 random access tlb miss 44483 random access second tlb miss 44186 vmx andrea # ./largepages3 memset page fault 2182791 memset tlb miss 460742 memset second tlb miss 459962 random access tlb miss 43981 random access second tlb miss 43988 ============ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/time.h> #define SIZE (3UL*1024*1024*1024) int main() { char *p = malloc(SIZE), *p2; struct timeval before, after; gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset page fault %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); return 0; } ============ Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 23:46:52 +00:00
if (err == -ENOMEM)
return -ENOMEM;
if (!err)
continue;
/* fall through */
}
if (pmd_none_or_clear_bad(src_pmd))
continue;
if (copy_pte_range(dst_vma, src_vma, dst_pmd, src_pmd,
addr, next))
return -ENOMEM;
} while (dst_pmd++, src_pmd++, addr = next, addr != end);
return 0;
}
static inline int
copy_pud_range(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma,
p4d_t *dst_p4d, p4d_t *src_p4d, unsigned long addr,
unsigned long end)
{
struct mm_struct *dst_mm = dst_vma->vm_mm;
struct mm_struct *src_mm = src_vma->vm_mm;
pud_t *src_pud, *dst_pud;
unsigned long next;
dst_pud = pud_alloc(dst_mm, dst_p4d, addr);
if (!dst_pud)
return -ENOMEM;
src_pud = pud_offset(src_p4d, addr);
do {
next = pud_addr_end(addr, end);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
if (pud_trans_huge(*src_pud) || pud_devmap(*src_pud)) {
int err;
VM_BUG_ON_VMA(next-addr != HPAGE_PUD_SIZE, src_vma);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
err = copy_huge_pud(dst_mm, src_mm,
dst_pud, src_pud, addr, src_vma);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
if (err == -ENOMEM)
return -ENOMEM;
if (!err)
continue;
/* fall through */
}
if (pud_none_or_clear_bad(src_pud))
continue;
if (copy_pmd_range(dst_vma, src_vma, dst_pud, src_pud,
addr, next))
return -ENOMEM;
} while (dst_pud++, src_pud++, addr = next, addr != end);
return 0;
}
static inline int
copy_p4d_range(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma,
pgd_t *dst_pgd, pgd_t *src_pgd, unsigned long addr,
unsigned long end)
{
struct mm_struct *dst_mm = dst_vma->vm_mm;
p4d_t *src_p4d, *dst_p4d;
unsigned long next;
dst_p4d = p4d_alloc(dst_mm, dst_pgd, addr);
if (!dst_p4d)
return -ENOMEM;
src_p4d = p4d_offset(src_pgd, addr);
do {
next = p4d_addr_end(addr, end);
if (p4d_none_or_clear_bad(src_p4d))
continue;
if (copy_pud_range(dst_vma, src_vma, dst_p4d, src_p4d,
addr, next))
return -ENOMEM;
} while (dst_p4d++, src_p4d++, addr = next, addr != end);
return 0;
}
/*
* Return true if the vma needs to copy the pgtable during this fork(). Return
* false when we can speed up fork() by allowing lazy page faults later until
* when the child accesses the memory range.
*/
static bool
vma_needs_copy(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma)
{
/*
* Always copy pgtables when dst_vma has uffd-wp enabled even if it's
* file-backed (e.g. shmem). Because when uffd-wp is enabled, pgtable
* contains uffd-wp protection information, that's something we can't
* retrieve from page cache, and skip copying will lose those info.
*/
if (userfaultfd_wp(dst_vma))
return true;
hugetlb: lazy page table copies in fork() Lazy page table copying at fork time was introduced with commit d992895ba2b2 ("[PATCH] Lazy page table copies in fork()"). At the time, hugetlb was very new and did not support page faulting. As a result, it was excluded. When full page fault support was added for hugetlb, the exclusion was not removed. Simply remove the check that prevents lazy copying of hugetlb page tables at fork. Of course, like other mappings this only applies to shared mappings. Lazy page table copying at fork will be less advantageous for hugetlb mappings because: - There are fewer page table entries with hugetlb - hugetlb pmds can be shared instead of copied In any case, completely eliminating the copy at fork time should speed things up. Link: https://lkml.kernel.org/r/20220621235620.291305-5-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: James Houghton <jthoughton@google.com> Cc: kernel test robot <lkp@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:20 +00:00
if (src_vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
return true;
if (src_vma->anon_vma)
return true;
/*
* Don't copy ptes where a page fault will fill them correctly. Fork
* becomes much lighter when there are big shared or private readonly
* mappings. The tradeoff is that copy_page_range is more efficient
* than faulting.
*/
return false;
}
int
copy_page_range(struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma)
{
pgd_t *src_pgd, *dst_pgd;
unsigned long next;
unsigned long addr = src_vma->vm_start;
unsigned long end = src_vma->vm_end;
struct mm_struct *dst_mm = dst_vma->vm_mm;
struct mm_struct *src_mm = src_vma->vm_mm;
struct mmu_notifier_range range;
mm: move all mmu notifier invocations to be done outside the PT lock In order to allow sleeping during mmu notifier calls, we need to avoid invoking them under the page table spinlock. This patch solves the problem by calling invalidate_page notification after releasing the lock (but before freeing the page itself), or by wrapping the page invalidation with calls to invalidate_range_begin and invalidate_range_end. To prevent accidental changes to the invalidate_range_end arguments after the call to invalidate_range_begin, the patch introduces a convention of saving the arguments in consistently named locals: unsigned long mmun_start; /* For mmu_notifiers */ unsigned long mmun_end; /* For mmu_notifiers */ ... mmun_start = ... mmun_end = ... mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end); ... mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end); The patch changes code to use this convention for all calls to mmu_notifier_invalidate_range_start/end, except those where the calls are close enough so that anyone who glances at the code can see the values aren't changing. This patchset is a preliminary step towards on-demand paging design to be added to the RDMA stack. Why do we want on-demand paging for Infiniband? Applications register memory with an RDMA adapter using system calls, and subsequently post IO operations that refer to the corresponding virtual addresses directly to HW. Until now, this was achieved by pinning the memory during the registration calls. The goal of on demand paging is to avoid pinning the pages of registered memory regions (MRs). This will allow users the same flexibility they get when swapping any other part of their processes address spaces. Instead of requiring the entire MR to fit in physical memory, we can allow the MR to be larger, and only fit the current working set in physical memory. Why should anyone care? What problems are users currently experiencing? This can make programming with RDMA much simpler. Today, developers that are working with more data than their RAM can hold need either to deregister and reregister memory regions throughout their process's life, or keep a single memory region and copy the data to it. On demand paging will allow these developers to register a single MR at the beginning of their process's life, and let the operating system manage which pages needs to be fetched at a given time. In the future, we might be able to provide a single memory access key for each process that would provide the entire process's address as one large memory region, and the developers wouldn't need to register memory regions at all. Is there any prospect that any other subsystems will utilise these infrastructural changes? If so, which and how, etc? As for other subsystems, I understand that XPMEM wanted to sleep in MMU notifiers, as Christoph Lameter wrote at http://lkml.indiana.edu/hypermail/linux/kernel/0802.1/0460.html and perhaps Andrea knows about other use cases. Scheduling in mmu notifications is required since we need to sync the hardware with the secondary page tables change. A TLB flush of an IO device is inherently slower than a CPU TLB flush, so our design works by sending the invalidation request to the device, and waiting for an interrupt before exiting the mmu notifier handler. Avi said: kvm may be a buyer. kvm::mmu_lock, which serializes guest page faults, also protects long operations such as destroying large ranges. It would be good to convert it into a spinlock, but as it is used inside mmu notifiers, this cannot be done. (there are alternatives, such as keeping the spinlock and using a generation counter to do the teardown in O(1), which is what the "may" is doing up there). [akpm@linux-foundation.orgpossible speed tweak in hugetlb_cow(), cleanups] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Haggai Eran <haggaie@mellanox.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Liran Liss <liranl@mellanox.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:33:33 +00:00
bool is_cow;
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
int ret;
if (!vma_needs_copy(dst_vma, src_vma))
return 0;
if (is_vm_hugetlb_page(src_vma))
return copy_hugetlb_page_range(dst_mm, src_mm, dst_vma, src_vma);
if (unlikely(src_vma->vm_flags & VM_PFNMAP)) {
/*
* We do not free on error cases below as remove_vma
* gets called on error from higher level routine
*/
ret = track_pfn_copy(src_vma);
if (ret)
return ret;
}
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
/*
* We need to invalidate the secondary MMU mappings only when
* there could be a permission downgrade on the ptes of the
* parent mm. And a permission downgrade will only happen if
* is_cow_mapping() returns true.
*/
is_cow = is_cow_mapping(src_vma->vm_flags);
if (is_cow) {
mmu_notifier_range_init(&range, MMU_NOTIFY_PROTECTION_PAGE,
0, src_mm, addr, end);
mmu_notifier_invalidate_range_start(&range);
mm/gup: prevent gup_fast from racing with COW during fork Since commit 70e806e4e645 ("mm: Do early cow for pinned pages during fork() for ptes") pages under a FOLL_PIN will not be write protected during COW for fork. This means that pages returned from pin_user_pages(FOLL_WRITE) should not become write protected while the pin is active. However, there is a small race where get_user_pages_fast(FOLL_PIN) can establish a FOLL_PIN at the same time copy_present_page() is write protecting it: CPU 0 CPU 1 get_user_pages_fast() internal_get_user_pages_fast() copy_page_range() pte_alloc_map_lock() copy_present_page() atomic_read(has_pinned) == 0 page_maybe_dma_pinned() == false atomic_set(has_pinned, 1); gup_pgd_range() gup_pte_range() pte_t pte = gup_get_pte(ptep) pte_access_permitted(pte) try_grab_compound_head() pte = pte_wrprotect(pte) set_pte_at(); pte_unmap_unlock() // GUP now returns with a write protected page The first attempt to resolve this by using the write protect caused problems (and was missing a barrrier), see commit f3c64eda3e50 ("mm: avoid early COW write protect games during fork()") Instead wrap copy_p4d_range() with the write side of a seqcount and check the read side around gup_pgd_range(). If there is a collision then get_user_pages_fast() fails and falls back to slow GUP. Slow GUP is safe against this race because copy_page_range() is only called while holding the exclusive side of the mmap_lock on the src mm_struct. [akpm@linux-foundation.org: coding style fixes] Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com Fixes: f3c64eda3e50 ("mm: avoid early COW write protect games during fork()") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> [seqcount_t parts] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Leon Romanovsky <leonro@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:05:44 +00:00
/*
* Disabling preemption is not needed for the write side, as
* the read side doesn't spin, but goes to the mmap_lock.
*
* Use the raw variant of the seqcount_t write API to avoid
* lockdep complaining about preemptibility.
*/
vma_assert_write_locked(src_vma);
mm/gup: prevent gup_fast from racing with COW during fork Since commit 70e806e4e645 ("mm: Do early cow for pinned pages during fork() for ptes") pages under a FOLL_PIN will not be write protected during COW for fork. This means that pages returned from pin_user_pages(FOLL_WRITE) should not become write protected while the pin is active. However, there is a small race where get_user_pages_fast(FOLL_PIN) can establish a FOLL_PIN at the same time copy_present_page() is write protecting it: CPU 0 CPU 1 get_user_pages_fast() internal_get_user_pages_fast() copy_page_range() pte_alloc_map_lock() copy_present_page() atomic_read(has_pinned) == 0 page_maybe_dma_pinned() == false atomic_set(has_pinned, 1); gup_pgd_range() gup_pte_range() pte_t pte = gup_get_pte(ptep) pte_access_permitted(pte) try_grab_compound_head() pte = pte_wrprotect(pte) set_pte_at(); pte_unmap_unlock() // GUP now returns with a write protected page The first attempt to resolve this by using the write protect caused problems (and was missing a barrrier), see commit f3c64eda3e50 ("mm: avoid early COW write protect games during fork()") Instead wrap copy_p4d_range() with the write side of a seqcount and check the read side around gup_pgd_range(). If there is a collision then get_user_pages_fast() fails and falls back to slow GUP. Slow GUP is safe against this race because copy_page_range() is only called while holding the exclusive side of the mmap_lock on the src mm_struct. [akpm@linux-foundation.org: coding style fixes] Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com Fixes: f3c64eda3e50 ("mm: avoid early COW write protect games during fork()") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> [seqcount_t parts] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Leon Romanovsky <leonro@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:05:44 +00:00
raw_write_seqcount_begin(&src_mm->write_protect_seq);
}
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
ret = 0;
dst_pgd = pgd_offset(dst_mm, addr);
src_pgd = pgd_offset(src_mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(src_pgd))
continue;
if (unlikely(copy_p4d_range(dst_vma, src_vma, dst_pgd, src_pgd,
addr, next))) {
untrack_pfn_clear(dst_vma);
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
ret = -ENOMEM;
break;
}
} while (dst_pgd++, src_pgd++, addr = next, addr != end);
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
mm/gup: prevent gup_fast from racing with COW during fork Since commit 70e806e4e645 ("mm: Do early cow for pinned pages during fork() for ptes") pages under a FOLL_PIN will not be write protected during COW for fork. This means that pages returned from pin_user_pages(FOLL_WRITE) should not become write protected while the pin is active. However, there is a small race where get_user_pages_fast(FOLL_PIN) can establish a FOLL_PIN at the same time copy_present_page() is write protecting it: CPU 0 CPU 1 get_user_pages_fast() internal_get_user_pages_fast() copy_page_range() pte_alloc_map_lock() copy_present_page() atomic_read(has_pinned) == 0 page_maybe_dma_pinned() == false atomic_set(has_pinned, 1); gup_pgd_range() gup_pte_range() pte_t pte = gup_get_pte(ptep) pte_access_permitted(pte) try_grab_compound_head() pte = pte_wrprotect(pte) set_pte_at(); pte_unmap_unlock() // GUP now returns with a write protected page The first attempt to resolve this by using the write protect caused problems (and was missing a barrrier), see commit f3c64eda3e50 ("mm: avoid early COW write protect games during fork()") Instead wrap copy_p4d_range() with the write side of a seqcount and check the read side around gup_pgd_range(). If there is a collision then get_user_pages_fast() fails and falls back to slow GUP. Slow GUP is safe against this race because copy_page_range() is only called while holding the exclusive side of the mmap_lock on the src mm_struct. [akpm@linux-foundation.org: coding style fixes] Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com Fixes: f3c64eda3e50 ("mm: avoid early COW write protect games during fork()") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> [seqcount_t parts] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Leon Romanovsky <leonro@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:05:44 +00:00
if (is_cow) {
raw_write_seqcount_end(&src_mm->write_protect_seq);
mmu_notifier_invalidate_range_end(&range);
mm/gup: prevent gup_fast from racing with COW during fork Since commit 70e806e4e645 ("mm: Do early cow for pinned pages during fork() for ptes") pages under a FOLL_PIN will not be write protected during COW for fork. This means that pages returned from pin_user_pages(FOLL_WRITE) should not become write protected while the pin is active. However, there is a small race where get_user_pages_fast(FOLL_PIN) can establish a FOLL_PIN at the same time copy_present_page() is write protecting it: CPU 0 CPU 1 get_user_pages_fast() internal_get_user_pages_fast() copy_page_range() pte_alloc_map_lock() copy_present_page() atomic_read(has_pinned) == 0 page_maybe_dma_pinned() == false atomic_set(has_pinned, 1); gup_pgd_range() gup_pte_range() pte_t pte = gup_get_pte(ptep) pte_access_permitted(pte) try_grab_compound_head() pte = pte_wrprotect(pte) set_pte_at(); pte_unmap_unlock() // GUP now returns with a write protected page The first attempt to resolve this by using the write protect caused problems (and was missing a barrrier), see commit f3c64eda3e50 ("mm: avoid early COW write protect games during fork()") Instead wrap copy_p4d_range() with the write side of a seqcount and check the read side around gup_pgd_range(). If there is a collision then get_user_pages_fast() fails and falls back to slow GUP. Slow GUP is safe against this race because copy_page_range() is only called while holding the exclusive side of the mmap_lock on the src mm_struct. [akpm@linux-foundation.org: coding style fixes] Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com Fixes: f3c64eda3e50 ("mm: avoid early COW write protect games during fork()") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> [seqcount_t parts] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Leon Romanovsky <leonro@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 03:05:44 +00:00
}
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
return ret;
}
mm: don't skip swap entry even if zap_details specified Patch series "mm: Rework zap ptes on swap entries", v5. Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them. Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered. However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that. Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range(). Only patch 1 needs to be backported to stable if necessary. This patch (of 4): The "details" pointer shouldn't be the token to decide whether we should skip swap entries. For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out. Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them. A reproducer of the problem: ===8<=== #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <stdio.h> #include <assert.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int page_size; int shmem_fd; char *buffer; void main(void) { int ret; char val; page_size = getpagesize(); shmem_fd = memfd_create("test", 0); assert(shmem_fd >= 0); ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE, MAP_PRIVATE, shmem_fd, 0); assert(buffer != MAP_FAILED); /* Write private page, swap it out */ buffer[page_size] = 1; madvise(buffer, page_size * 2, MADV_PAGEOUT); /* This should drop private buffer[page_size] already */ ret = ftruncate(shmem_fd, page_size); assert(ret == 0); /* Recover the size */ ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); /* Re-read the data, it should be all zero */ val = buffer[page_size]; if (val == 0) printf("Good\n"); else printf("BUG\n"); } ===8<=== We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous. Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified. This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too. To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true. The issue seems to exist starting from the initial commit of git. [peterx@redhat.com: comment tweaks] Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:15 +00:00
/* Whether we should zap all COWed (private) pages too */
static inline bool should_zap_cows(struct zap_details *details)
{
/* By default, zap all pages */
if (!details)
return true;
/* Or, we zap COWed pages only if the caller wants to */
mm: change zap_details.zap_mapping into even_cows Currently we have a zap_mapping pointer maintained in zap_details, when it is specified we only want to zap the pages that has the same mapping with what the caller has specified. But what we want to do is actually simpler: we want to skip zapping private (COW-ed) pages in some cases. We can refer to unmap_mapping_pages() callers where we could have passed in different even_cows values. The other user is unmap_mapping_folio() where we always want to skip private pages. According to Hugh, we used a mapping pointer for historical reason, as explained here: https://lore.kernel.org/lkml/391aa58d-ce84-9d4-d68d-d98a9c533255@google.com/ Quoting partly from Hugh: Which raises the question again of why I did not just use a boolean flag there originally: aah, I think I've found why. In those days there was a horrible "optimization", for better performance on some benchmark I guess, which when you read from /dev/zero into a private mapping, would map the zero page there (look up read_zero_pagealigned() and zeromap_page_range() if you dare). So there was another category of page to be skipped along with the anon COWs, and I didn't want multiple tests in the zap loop, so checking check_mapping against page->mapping did both. I think nowadays you could do it by checking for PageAnon page (or genuine swap entry) instead. This patch replaces the zap_details.zap_mapping pointer into the even_cows boolean, then we check it against PageAnon. Link: https://lkml.kernel.org/r/20220216094810.60572-4-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Suggested-by: Hugh Dickins <hughd@google.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:21 +00:00
return details->even_cows;
mm: don't skip swap entry even if zap_details specified Patch series "mm: Rework zap ptes on swap entries", v5. Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them. Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered. However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that. Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range(). Only patch 1 needs to be backported to stable if necessary. This patch (of 4): The "details" pointer shouldn't be the token to decide whether we should skip swap entries. For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out. Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them. A reproducer of the problem: ===8<=== #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <stdio.h> #include <assert.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int page_size; int shmem_fd; char *buffer; void main(void) { int ret; char val; page_size = getpagesize(); shmem_fd = memfd_create("test", 0); assert(shmem_fd >= 0); ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE, MAP_PRIVATE, shmem_fd, 0); assert(buffer != MAP_FAILED); /* Write private page, swap it out */ buffer[page_size] = 1; madvise(buffer, page_size * 2, MADV_PAGEOUT); /* This should drop private buffer[page_size] already */ ret = ftruncate(shmem_fd, page_size); assert(ret == 0); /* Recover the size */ ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); /* Re-read the data, it should be all zero */ val = buffer[page_size]; if (val == 0) printf("Good\n"); else printf("BUG\n"); } ===8<=== We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous. Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified. This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too. To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true. The issue seems to exist starting from the initial commit of git. [peterx@redhat.com: comment tweaks] Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:15 +00:00
}
/* Decides whether we should zap this folio with the folio pointer specified */
static inline bool should_zap_folio(struct zap_details *details,
struct folio *folio)
{
/* If we can make a decision without *folio.. */
mm: don't skip swap entry even if zap_details specified Patch series "mm: Rework zap ptes on swap entries", v5. Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them. Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered. However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that. Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range(). Only patch 1 needs to be backported to stable if necessary. This patch (of 4): The "details" pointer shouldn't be the token to decide whether we should skip swap entries. For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out. Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them. A reproducer of the problem: ===8<=== #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <stdio.h> #include <assert.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int page_size; int shmem_fd; char *buffer; void main(void) { int ret; char val; page_size = getpagesize(); shmem_fd = memfd_create("test", 0); assert(shmem_fd >= 0); ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE, MAP_PRIVATE, shmem_fd, 0); assert(buffer != MAP_FAILED); /* Write private page, swap it out */ buffer[page_size] = 1; madvise(buffer, page_size * 2, MADV_PAGEOUT); /* This should drop private buffer[page_size] already */ ret = ftruncate(shmem_fd, page_size); assert(ret == 0); /* Recover the size */ ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); /* Re-read the data, it should be all zero */ val = buffer[page_size]; if (val == 0) printf("Good\n"); else printf("BUG\n"); } ===8<=== We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous. Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified. This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too. To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true. The issue seems to exist starting from the initial commit of git. [peterx@redhat.com: comment tweaks] Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:15 +00:00
if (should_zap_cows(details))
return true;
mm: don't skip swap entry even if zap_details specified Patch series "mm: Rework zap ptes on swap entries", v5. Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them. Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered. However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that. Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range(). Only patch 1 needs to be backported to stable if necessary. This patch (of 4): The "details" pointer shouldn't be the token to decide whether we should skip swap entries. For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out. Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them. A reproducer of the problem: ===8<=== #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <stdio.h> #include <assert.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int page_size; int shmem_fd; char *buffer; void main(void) { int ret; char val; page_size = getpagesize(); shmem_fd = memfd_create("test", 0); assert(shmem_fd >= 0); ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE, MAP_PRIVATE, shmem_fd, 0); assert(buffer != MAP_FAILED); /* Write private page, swap it out */ buffer[page_size] = 1; madvise(buffer, page_size * 2, MADV_PAGEOUT); /* This should drop private buffer[page_size] already */ ret = ftruncate(shmem_fd, page_size); assert(ret == 0); /* Recover the size */ ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); /* Re-read the data, it should be all zero */ val = buffer[page_size]; if (val == 0) printf("Good\n"); else printf("BUG\n"); } ===8<=== We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous. Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified. This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too. To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true. The issue seems to exist starting from the initial commit of git. [peterx@redhat.com: comment tweaks] Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:15 +00:00
/* Otherwise we should only zap non-anon folios */
return !folio_test_anon(folio);
}
static inline bool zap_drop_file_uffd_wp(struct zap_details *details)
{
if (!details)
return false;
return details->zap_flags & ZAP_FLAG_DROP_MARKER;
}
/*
* This function makes sure that we'll replace the none pte with an uffd-wp
* swap special pte marker when necessary. Must be with the pgtable lock held.
*/
static inline void
zap_install_uffd_wp_if_needed(struct vm_area_struct *vma,
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
unsigned long addr, pte_t *pte, int nr,
struct zap_details *details, pte_t pteval)
{
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
/* Zap on anonymous always means dropping everything */
if (vma_is_anonymous(vma))
return;
if (zap_drop_file_uffd_wp(details))
return;
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
for (;;) {
/* the PFN in the PTE is irrelevant. */
pte_install_uffd_wp_if_needed(vma, addr, pte, pteval);
if (--nr == 0)
break;
pte++;
addr += PAGE_SIZE;
}
}
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
static __always_inline void zap_present_folio_ptes(struct mmu_gather *tlb,
struct vm_area_struct *vma, struct folio *folio,
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
struct page *page, pte_t *pte, pte_t ptent, unsigned int nr,
unsigned long addr, struct zap_details *details, int *rss,
bool *force_flush, bool *force_break)
mm/memory: factor out zapping of present pte into zap_present_pte() Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3. This series is based on [1]. Similar to what we did with fork(), let's implement PTE batching during unmap/zap when processing PTE-mapped THPs. We collect consecutive PTEs that map consecutive pages of the same large folio, making sure that the other PTE bits are compatible, and (a) adjust the refcount only once per batch, (b) call rmap handling functions only once per batch, (c) perform batch PTE setting/updates and (d) perform TLB entry removal once per batch. Ryan was previously working on this in the context of cont-pte for arm64, int latest iteration [2] with a focus on arm6 with cont-pte only. This series implements the optimization for all architectures, independent of such PTE bits, teaches MMU gather/TLB code to be fully aware of such large-folio-pages batches as well, and amkes use of our new rmap batching function when removing the rmap. To achieve that, we have to enlighten MMU gather / page freeing code (i.e., everything that consumes encoded_page) to process unmapping of consecutive pages that all belong to the same large folio. I'm being very careful to not degrade order-0 performance, and it looks like I managed to achieve that. While this series should -- similar to [1] -- be beneficial for adding cont-pte support on arm64[2], it's one of the requirements for maintaining a total mapcount[3] for large folios with minimal added overhead and further changes[4] that build up on top of the total mapcount. Independent of all that, this series results in a speedup during munmap() and similar unmapping (process teardown, MADV_DONTNEED on larger ranges) with PTE-mapped THP, which is the default with THPs that are smaller than a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]). On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by PTE-mapped folios of the same size (stddev < 1%) results in the following runtimes for munmap() in seconds (shorter is better): Folio Size | mm-unstable | New | Change --------------------------------------------- 4KiB | 0.058110 | 0.057715 | - 1% 16KiB | 0.044198 | 0.035469 | -20% 32KiB | 0.034216 | 0.023522 | -31% 64KiB | 0.029207 | 0.018434 | -37% 128KiB | 0.026579 | 0.014026 | -47% 256KiB | 0.025130 | 0.011756 | -53% 512KiB | 0.024292 | 0.010703 | -56% 1024KiB | 0.023812 | 0.010294 | -57% 2048KiB | 0.023785 | 0.009910 | -58% [1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com [2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com [3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com [4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com [5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com This patch (of 10): Let's prepare for further changes by factoring out processing of present PTEs. Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:26 +00:00
{
struct mm_struct *mm = tlb->mm;
bool delay_rmap = false;
if (!folio_test_anon(folio)) {
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
ptent = get_and_clear_full_ptes(mm, addr, pte, nr, tlb->fullmm);
mm/memory: factor out zapping of present pte into zap_present_pte() Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3. This series is based on [1]. Similar to what we did with fork(), let's implement PTE batching during unmap/zap when processing PTE-mapped THPs. We collect consecutive PTEs that map consecutive pages of the same large folio, making sure that the other PTE bits are compatible, and (a) adjust the refcount only once per batch, (b) call rmap handling functions only once per batch, (c) perform batch PTE setting/updates and (d) perform TLB entry removal once per batch. Ryan was previously working on this in the context of cont-pte for arm64, int latest iteration [2] with a focus on arm6 with cont-pte only. This series implements the optimization for all architectures, independent of such PTE bits, teaches MMU gather/TLB code to be fully aware of such large-folio-pages batches as well, and amkes use of our new rmap batching function when removing the rmap. To achieve that, we have to enlighten MMU gather / page freeing code (i.e., everything that consumes encoded_page) to process unmapping of consecutive pages that all belong to the same large folio. I'm being very careful to not degrade order-0 performance, and it looks like I managed to achieve that. While this series should -- similar to [1] -- be beneficial for adding cont-pte support on arm64[2], it's one of the requirements for maintaining a total mapcount[3] for large folios with minimal added overhead and further changes[4] that build up on top of the total mapcount. Independent of all that, this series results in a speedup during munmap() and similar unmapping (process teardown, MADV_DONTNEED on larger ranges) with PTE-mapped THP, which is the default with THPs that are smaller than a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]). On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by PTE-mapped folios of the same size (stddev < 1%) results in the following runtimes for munmap() in seconds (shorter is better): Folio Size | mm-unstable | New | Change --------------------------------------------- 4KiB | 0.058110 | 0.057715 | - 1% 16KiB | 0.044198 | 0.035469 | -20% 32KiB | 0.034216 | 0.023522 | -31% 64KiB | 0.029207 | 0.018434 | -37% 128KiB | 0.026579 | 0.014026 | -47% 256KiB | 0.025130 | 0.011756 | -53% 512KiB | 0.024292 | 0.010703 | -56% 1024KiB | 0.023812 | 0.010294 | -57% 2048KiB | 0.023785 | 0.009910 | -58% [1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com [2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com [3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com [4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com [5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com This patch (of 10): Let's prepare for further changes by factoring out processing of present PTEs. Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:26 +00:00
if (pte_dirty(ptent)) {
folio_mark_dirty(folio);
if (tlb_delay_rmap(tlb)) {
delay_rmap = true;
*force_flush = true;
}
}
if (pte_young(ptent) && likely(vma_has_recency(vma)))
folio_mark_accessed(folio);
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
rss[mm_counter(folio)] -= nr;
mm/memory: further separate anon and pagecache folio handling in zap_present_pte() We don't need up-to-date accessed-dirty information for anon folios and can simply work with the ptent we already have. Also, we know the RSS counter we want to update. We can safely move arch_check_zapped_pte() + tlb_remove_tlb_entry() + zap_install_uffd_wp_if_needed() after updating the folio and RSS. While at it, only call zap_install_uffd_wp_if_needed() if there is even any chance that pte_install_uffd_wp_if_needed() would do *something*. That is, just don't bother if uffd-wp does not apply. Link: https://lkml.kernel.org/r/20240214204435.167852-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:28 +00:00
} else {
/* We don't need up-to-date accessed/dirty bits. */
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
clear_full_ptes(mm, addr, pte, nr, tlb->fullmm);
rss[MM_ANONPAGES] -= nr;
mm/memory: factor out zapping of present pte into zap_present_pte() Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3. This series is based on [1]. Similar to what we did with fork(), let's implement PTE batching during unmap/zap when processing PTE-mapped THPs. We collect consecutive PTEs that map consecutive pages of the same large folio, making sure that the other PTE bits are compatible, and (a) adjust the refcount only once per batch, (b) call rmap handling functions only once per batch, (c) perform batch PTE setting/updates and (d) perform TLB entry removal once per batch. Ryan was previously working on this in the context of cont-pte for arm64, int latest iteration [2] with a focus on arm6 with cont-pte only. This series implements the optimization for all architectures, independent of such PTE bits, teaches MMU gather/TLB code to be fully aware of such large-folio-pages batches as well, and amkes use of our new rmap batching function when removing the rmap. To achieve that, we have to enlighten MMU gather / page freeing code (i.e., everything that consumes encoded_page) to process unmapping of consecutive pages that all belong to the same large folio. I'm being very careful to not degrade order-0 performance, and it looks like I managed to achieve that. While this series should -- similar to [1] -- be beneficial for adding cont-pte support on arm64[2], it's one of the requirements for maintaining a total mapcount[3] for large folios with minimal added overhead and further changes[4] that build up on top of the total mapcount. Independent of all that, this series results in a speedup during munmap() and similar unmapping (process teardown, MADV_DONTNEED on larger ranges) with PTE-mapped THP, which is the default with THPs that are smaller than a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]). On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by PTE-mapped folios of the same size (stddev < 1%) results in the following runtimes for munmap() in seconds (shorter is better): Folio Size | mm-unstable | New | Change --------------------------------------------- 4KiB | 0.058110 | 0.057715 | - 1% 16KiB | 0.044198 | 0.035469 | -20% 32KiB | 0.034216 | 0.023522 | -31% 64KiB | 0.029207 | 0.018434 | -37% 128KiB | 0.026579 | 0.014026 | -47% 256KiB | 0.025130 | 0.011756 | -53% 512KiB | 0.024292 | 0.010703 | -56% 1024KiB | 0.023812 | 0.010294 | -57% 2048KiB | 0.023785 | 0.009910 | -58% [1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com [2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com [3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com [4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com [5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com This patch (of 10): Let's prepare for further changes by factoring out processing of present PTEs. Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:26 +00:00
}
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
/* Checking a single PTE in a batch is sufficient. */
mm/memory: further separate anon and pagecache folio handling in zap_present_pte() We don't need up-to-date accessed-dirty information for anon folios and can simply work with the ptent we already have. Also, we know the RSS counter we want to update. We can safely move arch_check_zapped_pte() + tlb_remove_tlb_entry() + zap_install_uffd_wp_if_needed() after updating the folio and RSS. While at it, only call zap_install_uffd_wp_if_needed() if there is even any chance that pte_install_uffd_wp_if_needed() would do *something*. That is, just don't bother if uffd-wp does not apply. Link: https://lkml.kernel.org/r/20240214204435.167852-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:28 +00:00
arch_check_zapped_pte(vma, ptent);
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
tlb_remove_tlb_entries(tlb, pte, nr, addr);
mm/memory: further separate anon and pagecache folio handling in zap_present_pte() We don't need up-to-date accessed-dirty information for anon folios and can simply work with the ptent we already have. Also, we know the RSS counter we want to update. We can safely move arch_check_zapped_pte() + tlb_remove_tlb_entry() + zap_install_uffd_wp_if_needed() after updating the folio and RSS. While at it, only call zap_install_uffd_wp_if_needed() if there is even any chance that pte_install_uffd_wp_if_needed() would do *something*. That is, just don't bother if uffd-wp does not apply. Link: https://lkml.kernel.org/r/20240214204435.167852-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:28 +00:00
if (unlikely(userfaultfd_pte_wp(vma, ptent)))
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
zap_install_uffd_wp_if_needed(vma, addr, pte, nr, details,
ptent);
mm/memory: further separate anon and pagecache folio handling in zap_present_pte() We don't need up-to-date accessed-dirty information for anon folios and can simply work with the ptent we already have. Also, we know the RSS counter we want to update. We can safely move arch_check_zapped_pte() + tlb_remove_tlb_entry() + zap_install_uffd_wp_if_needed() after updating the folio and RSS. While at it, only call zap_install_uffd_wp_if_needed() if there is even any chance that pte_install_uffd_wp_if_needed() would do *something*. That is, just don't bother if uffd-wp does not apply. Link: https://lkml.kernel.org/r/20240214204435.167852-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:28 +00:00
mm/memory: factor out zapping of present pte into zap_present_pte() Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3. This series is based on [1]. Similar to what we did with fork(), let's implement PTE batching during unmap/zap when processing PTE-mapped THPs. We collect consecutive PTEs that map consecutive pages of the same large folio, making sure that the other PTE bits are compatible, and (a) adjust the refcount only once per batch, (b) call rmap handling functions only once per batch, (c) perform batch PTE setting/updates and (d) perform TLB entry removal once per batch. Ryan was previously working on this in the context of cont-pte for arm64, int latest iteration [2] with a focus on arm6 with cont-pte only. This series implements the optimization for all architectures, independent of such PTE bits, teaches MMU gather/TLB code to be fully aware of such large-folio-pages batches as well, and amkes use of our new rmap batching function when removing the rmap. To achieve that, we have to enlighten MMU gather / page freeing code (i.e., everything that consumes encoded_page) to process unmapping of consecutive pages that all belong to the same large folio. I'm being very careful to not degrade order-0 performance, and it looks like I managed to achieve that. While this series should -- similar to [1] -- be beneficial for adding cont-pte support on arm64[2], it's one of the requirements for maintaining a total mapcount[3] for large folios with minimal added overhead and further changes[4] that build up on top of the total mapcount. Independent of all that, this series results in a speedup during munmap() and similar unmapping (process teardown, MADV_DONTNEED on larger ranges) with PTE-mapped THP, which is the default with THPs that are smaller than a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]). On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by PTE-mapped folios of the same size (stddev < 1%) results in the following runtimes for munmap() in seconds (shorter is better): Folio Size | mm-unstable | New | Change --------------------------------------------- 4KiB | 0.058110 | 0.057715 | - 1% 16KiB | 0.044198 | 0.035469 | -20% 32KiB | 0.034216 | 0.023522 | -31% 64KiB | 0.029207 | 0.018434 | -37% 128KiB | 0.026579 | 0.014026 | -47% 256KiB | 0.025130 | 0.011756 | -53% 512KiB | 0.024292 | 0.010703 | -56% 1024KiB | 0.023812 | 0.010294 | -57% 2048KiB | 0.023785 | 0.009910 | -58% [1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com [2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com [3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com [4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com [5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com This patch (of 10): Let's prepare for further changes by factoring out processing of present PTEs. Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:26 +00:00
if (!delay_rmap) {
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
folio_remove_rmap_ptes(folio, page, nr, vma);
mm/memory: use folio_mapcount() in zap_present_folio_ptes() We want to limit the use of page_mapcount() to the places where it is absolutely necessary. In zap_present_folio_ptes(), let's simply check the folio mapcount(). If there is some issue, it will underflow at some point either way when unmapping. As indicated already in commit 10ebac4f95e7 ("mm/memory: optimize unmap/zap with PTE-mapped THP"), we already documented "If we ever have a cheap folio_mapcount(), we might just want to check for underflows there.". There is no change for small folios. For large folios, we'll now catch more underflows when batch-unmapping, because instead of only testing the mapcount of the first subpage, we'll test if the folio mapcount underflows. Link: https://lkml.kernel.org/r/20240409192301.907377-8-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Chris Zankel <chris@zankel.net> Cc: Hugh Dickins <hughd@google.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Richard Chang <richardycc@google.com> Cc: Rich Felker <dalias@libc.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-09 19:22:50 +00:00
if (unlikely(folio_mapcount(folio) < 0))
mm/memory: factor out zapping of present pte into zap_present_pte() Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3. This series is based on [1]. Similar to what we did with fork(), let's implement PTE batching during unmap/zap when processing PTE-mapped THPs. We collect consecutive PTEs that map consecutive pages of the same large folio, making sure that the other PTE bits are compatible, and (a) adjust the refcount only once per batch, (b) call rmap handling functions only once per batch, (c) perform batch PTE setting/updates and (d) perform TLB entry removal once per batch. Ryan was previously working on this in the context of cont-pte for arm64, int latest iteration [2] with a focus on arm6 with cont-pte only. This series implements the optimization for all architectures, independent of such PTE bits, teaches MMU gather/TLB code to be fully aware of such large-folio-pages batches as well, and amkes use of our new rmap batching function when removing the rmap. To achieve that, we have to enlighten MMU gather / page freeing code (i.e., everything that consumes encoded_page) to process unmapping of consecutive pages that all belong to the same large folio. I'm being very careful to not degrade order-0 performance, and it looks like I managed to achieve that. While this series should -- similar to [1] -- be beneficial for adding cont-pte support on arm64[2], it's one of the requirements for maintaining a total mapcount[3] for large folios with minimal added overhead and further changes[4] that build up on top of the total mapcount. Independent of all that, this series results in a speedup during munmap() and similar unmapping (process teardown, MADV_DONTNEED on larger ranges) with PTE-mapped THP, which is the default with THPs that are smaller than a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]). On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by PTE-mapped folios of the same size (stddev < 1%) results in the following runtimes for munmap() in seconds (shorter is better): Folio Size | mm-unstable | New | Change --------------------------------------------- 4KiB | 0.058110 | 0.057715 | - 1% 16KiB | 0.044198 | 0.035469 | -20% 32KiB | 0.034216 | 0.023522 | -31% 64KiB | 0.029207 | 0.018434 | -37% 128KiB | 0.026579 | 0.014026 | -47% 256KiB | 0.025130 | 0.011756 | -53% 512KiB | 0.024292 | 0.010703 | -56% 1024KiB | 0.023812 | 0.010294 | -57% 2048KiB | 0.023785 | 0.009910 | -58% [1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com [2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com [3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com [4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com [5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com This patch (of 10): Let's prepare for further changes by factoring out processing of present PTEs. Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:26 +00:00
print_bad_pte(vma, addr, ptent, page);
}
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
if (unlikely(__tlb_remove_folio_pages(tlb, page, nr, delay_rmap))) {
mm/memory: factor out zapping of present pte into zap_present_pte() Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3. This series is based on [1]. Similar to what we did with fork(), let's implement PTE batching during unmap/zap when processing PTE-mapped THPs. We collect consecutive PTEs that map consecutive pages of the same large folio, making sure that the other PTE bits are compatible, and (a) adjust the refcount only once per batch, (b) call rmap handling functions only once per batch, (c) perform batch PTE setting/updates and (d) perform TLB entry removal once per batch. Ryan was previously working on this in the context of cont-pte for arm64, int latest iteration [2] with a focus on arm6 with cont-pte only. This series implements the optimization for all architectures, independent of such PTE bits, teaches MMU gather/TLB code to be fully aware of such large-folio-pages batches as well, and amkes use of our new rmap batching function when removing the rmap. To achieve that, we have to enlighten MMU gather / page freeing code (i.e., everything that consumes encoded_page) to process unmapping of consecutive pages that all belong to the same large folio. I'm being very careful to not degrade order-0 performance, and it looks like I managed to achieve that. While this series should -- similar to [1] -- be beneficial for adding cont-pte support on arm64[2], it's one of the requirements for maintaining a total mapcount[3] for large folios with minimal added overhead and further changes[4] that build up on top of the total mapcount. Independent of all that, this series results in a speedup during munmap() and similar unmapping (process teardown, MADV_DONTNEED on larger ranges) with PTE-mapped THP, which is the default with THPs that are smaller than a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]). On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by PTE-mapped folios of the same size (stddev < 1%) results in the following runtimes for munmap() in seconds (shorter is better): Folio Size | mm-unstable | New | Change --------------------------------------------- 4KiB | 0.058110 | 0.057715 | - 1% 16KiB | 0.044198 | 0.035469 | -20% 32KiB | 0.034216 | 0.023522 | -31% 64KiB | 0.029207 | 0.018434 | -37% 128KiB | 0.026579 | 0.014026 | -47% 256KiB | 0.025130 | 0.011756 | -53% 512KiB | 0.024292 | 0.010703 | -56% 1024KiB | 0.023812 | 0.010294 | -57% 2048KiB | 0.023785 | 0.009910 | -58% [1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com [2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com [3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com [4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com [5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com This patch (of 10): Let's prepare for further changes by factoring out processing of present PTEs. Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:26 +00:00
*force_flush = true;
*force_break = true;
}
}
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
/*
* Zap or skip at least one present PTE, trying to batch-process subsequent
* PTEs that map consecutive pages of the same folio.
*
* Returns the number of processed (skipped or zapped) PTEs (at least 1).
*/
static inline int zap_present_ptes(struct mmu_gather *tlb,
struct vm_area_struct *vma, pte_t *pte, pte_t ptent,
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
unsigned int max_nr, unsigned long addr,
struct zap_details *details, int *rss, bool *force_flush,
bool *force_break)
{
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
const fpb_t fpb_flags = FPB_IGNORE_DIRTY | FPB_IGNORE_SOFT_DIRTY;
struct mm_struct *mm = tlb->mm;
struct folio *folio;
struct page *page;
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
int nr;
page = vm_normal_page(vma, addr, ptent);
if (!page) {
/* We don't need up-to-date accessed/dirty bits. */
ptep_get_and_clear_full(mm, addr, pte, tlb->fullmm);
arch_check_zapped_pte(vma, ptent);
tlb_remove_tlb_entry(tlb, pte, addr);
if (userfaultfd_pte_wp(vma, ptent))
zap_install_uffd_wp_if_needed(vma, addr, pte, 1,
details, ptent);
ksm_might_unmap_zero_page(mm, ptent);
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
return 1;
}
folio = page_folio(page);
if (unlikely(!should_zap_folio(details, folio)))
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
return 1;
/*
* Make sure that the common "small folio" case is as fast as possible
* by keeping the batching logic separate.
*/
if (unlikely(folio_test_large(folio) && max_nr != 1)) {
nr = folio_pte_batch(folio, addr, pte, ptent, max_nr, fpb_flags,
NULL, NULL, NULL);
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
zap_present_folio_ptes(tlb, vma, folio, page, pte, ptent, nr,
addr, details, rss, force_flush,
force_break);
return nr;
}
zap_present_folio_ptes(tlb, vma, folio, page, pte, ptent, 1, addr,
details, rss, force_flush, force_break);
return 1;
}
static unsigned long zap_pte_range(struct mmu_gather *tlb,
2005-10-30 01:16:12 +00:00
struct vm_area_struct *vma, pmd_t *pmd,
unsigned long addr, unsigned long end,
struct zap_details *details)
{
mm/memory: factor out zapping of present pte into zap_present_pte() Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3. This series is based on [1]. Similar to what we did with fork(), let's implement PTE batching during unmap/zap when processing PTE-mapped THPs. We collect consecutive PTEs that map consecutive pages of the same large folio, making sure that the other PTE bits are compatible, and (a) adjust the refcount only once per batch, (b) call rmap handling functions only once per batch, (c) perform batch PTE setting/updates and (d) perform TLB entry removal once per batch. Ryan was previously working on this in the context of cont-pte for arm64, int latest iteration [2] with a focus on arm6 with cont-pte only. This series implements the optimization for all architectures, independent of such PTE bits, teaches MMU gather/TLB code to be fully aware of such large-folio-pages batches as well, and amkes use of our new rmap batching function when removing the rmap. To achieve that, we have to enlighten MMU gather / page freeing code (i.e., everything that consumes encoded_page) to process unmapping of consecutive pages that all belong to the same large folio. I'm being very careful to not degrade order-0 performance, and it looks like I managed to achieve that. While this series should -- similar to [1] -- be beneficial for adding cont-pte support on arm64[2], it's one of the requirements for maintaining a total mapcount[3] for large folios with minimal added overhead and further changes[4] that build up on top of the total mapcount. Independent of all that, this series results in a speedup during munmap() and similar unmapping (process teardown, MADV_DONTNEED on larger ranges) with PTE-mapped THP, which is the default with THPs that are smaller than a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]). On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by PTE-mapped folios of the same size (stddev < 1%) results in the following runtimes for munmap() in seconds (shorter is better): Folio Size | mm-unstable | New | Change --------------------------------------------- 4KiB | 0.058110 | 0.057715 | - 1% 16KiB | 0.044198 | 0.035469 | -20% 32KiB | 0.034216 | 0.023522 | -31% 64KiB | 0.029207 | 0.018434 | -37% 128KiB | 0.026579 | 0.014026 | -47% 256KiB | 0.025130 | 0.011756 | -53% 512KiB | 0.024292 | 0.010703 | -56% 1024KiB | 0.023812 | 0.010294 | -57% 2048KiB | 0.023785 | 0.009910 | -58% [1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com [2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com [3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com [4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com [5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com This patch (of 10): Let's prepare for further changes by factoring out processing of present PTEs. Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:26 +00:00
bool force_flush = false, force_break = false;
2005-10-30 01:16:12 +00:00
struct mm_struct *mm = tlb->mm;
int rss[NR_MM_COUNTERS];
spinlock_t *ptl;
mm: fix wrong kunmap_atomic() pointer Running a ktest.pl test, I hit the following bug on x86_32: ------------[ cut here ]------------ WARNING: at arch/x86/mm/highmem_32.c:81 __kunmap_atomic+0x64/0xc1() Hardware name: Modules linked in: Pid: 93, comm: sh Not tainted 2.6.39-test+ #1 Call Trace: [<c04450da>] warn_slowpath_common+0x7c/0x91 [<c042f5df>] ? __kunmap_atomic+0x64/0xc1 [<c042f5df>] ? __kunmap_atomic+0x64/0xc1^M [<c0445111>] warn_slowpath_null+0x22/0x24 [<c042f5df>] __kunmap_atomic+0x64/0xc1 [<c04d4a22>] unmap_vmas+0x43a/0x4e0 [<c04d9065>] exit_mmap+0x91/0xd2 [<c0443057>] mmput+0x43/0xad [<c0448358>] exit_mm+0x111/0x119 [<c044855f>] do_exit+0x1ff/0x5fa [<c0454ea2>] ? set_current_blocked+0x3c/0x40 [<c0454f24>] ? sigprocmask+0x7e/0x8e [<c0448b55>] do_group_exit+0x65/0x88 [<c0448b90>] sys_exit_group+0x18/0x1c [<c0c3915f>] sysenter_do_call+0x12/0x38 ---[ end trace 8055f74ea3c0eb62 ]--- Running a ktest.pl git bisect, found the culprit: commit e303297e6c3a ("mm: extended batches for generic mmu_gather") But although this was the commit triggering the bug, it was not the one originally responsible for the bug. That was commit d16dfc550f53 ("mm: mmu_gather rework"). The code in zap_pte_range() has something that looks like the following: pte = pte_offset_map_lock(mm, pmd, addr, &ptl); do { [...] } while (pte++, addr += PAGE_SIZE, addr != end); pte_unmap_unlock(pte - 1, ptl); The pte starts off pointing at the first element in the page table directory that was returned by the pte_offset_map_lock(). When it's done with the page, pte will be pointing to anything between the next entry and the first entry of the next page inclusive. By doing a pte - 1, this puts the pte back onto the original page, which is all that pte_unmap_unlock() needs. In most archs (64 bit), this is not an issue as the pte is ignored in the pte_unmap_unlock(). But on 32 bit archs, where things may be kmapped, it is essential that the pte passed to pte_unmap_unlock() resides on the same page that was given by pte_offest_map_lock(). The problem came in d16dfc55 ("mm: mmu_gather rework") where it introduced a "break;" from the while loop. This alone did not seem to easily trigger the bug. But the modifications made by e303297e6 caused that "break;" to be hit on the first iteration, before the pte++. The pte not being incremented will now cause pte_unmap_unlock(pte - 1) to be pointing to the previous page. This will cause the wrong page to be unmapped, and also trigger the warning above. The simple solution is to just save the pointer given by pte_offset_map_lock() and use it in the unlock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 22:08:23 +00:00
pte_t *start_pte;
pte_t *pte;
swp_entry_t entry;
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
int nr;
tlb_change_page_size(tlb, PAGE_SIZE);
init_rss_vec(rss);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
start_pte = pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
if (!pte)
return addr;
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 20:31:52 +00:00
flush_tlb_batched_pending(mm);
arch_enter_lazy_mmu_mode();
do {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_t ptent = ptep_get(pte);
mm/memory: factor out zapping of present pte into zap_present_pte() Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3. This series is based on [1]. Similar to what we did with fork(), let's implement PTE batching during unmap/zap when processing PTE-mapped THPs. We collect consecutive PTEs that map consecutive pages of the same large folio, making sure that the other PTE bits are compatible, and (a) adjust the refcount only once per batch, (b) call rmap handling functions only once per batch, (c) perform batch PTE setting/updates and (d) perform TLB entry removal once per batch. Ryan was previously working on this in the context of cont-pte for arm64, int latest iteration [2] with a focus on arm6 with cont-pte only. This series implements the optimization for all architectures, independent of such PTE bits, teaches MMU gather/TLB code to be fully aware of such large-folio-pages batches as well, and amkes use of our new rmap batching function when removing the rmap. To achieve that, we have to enlighten MMU gather / page freeing code (i.e., everything that consumes encoded_page) to process unmapping of consecutive pages that all belong to the same large folio. I'm being very careful to not degrade order-0 performance, and it looks like I managed to achieve that. While this series should -- similar to [1] -- be beneficial for adding cont-pte support on arm64[2], it's one of the requirements for maintaining a total mapcount[3] for large folios with minimal added overhead and further changes[4] that build up on top of the total mapcount. Independent of all that, this series results in a speedup during munmap() and similar unmapping (process teardown, MADV_DONTNEED on larger ranges) with PTE-mapped THP, which is the default with THPs that are smaller than a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]). On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by PTE-mapped folios of the same size (stddev < 1%) results in the following runtimes for munmap() in seconds (shorter is better): Folio Size | mm-unstable | New | Change --------------------------------------------- 4KiB | 0.058110 | 0.057715 | - 1% 16KiB | 0.044198 | 0.035469 | -20% 32KiB | 0.034216 | 0.023522 | -31% 64KiB | 0.029207 | 0.018434 | -37% 128KiB | 0.026579 | 0.014026 | -47% 256KiB | 0.025130 | 0.011756 | -53% 512KiB | 0.024292 | 0.010703 | -56% 1024KiB | 0.023812 | 0.010294 | -57% 2048KiB | 0.023785 | 0.009910 | -58% [1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com [2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com [3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com [4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com [5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com This patch (of 10): Let's prepare for further changes by factoring out processing of present PTEs. Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:26 +00:00
struct folio *folio;
struct page *page;
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
int max_nr;
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
nr = 1;
if (pte_none(ptent))
continue;
mm: release the spinlock on zap_pte_range In our testing (camera recording), Miguel and Wei found unmap_page_range() takes above 6ms with preemption disabled easily. When I see that, the reason is it holds page table spinlock during entire 512 page operation in a PMD. 6.2ms is never trivial for user experince if RT task couldn't run in the time because it could make frame drop or glitch audio problem. I had a time to benchmark it via adding some trace_printk hooks between pte_offset_map_lock and pte_unmap_unlock in zap_pte_range. The testing device is 2018 premium mobile device. I can get 2ms delay rather easily to release 2M(ie, 512 pages) when the task runs on little core even though it doesn't have any IPI and LRU lock contention. It's already too heavy. If I remove activate_page, 35-40% overhead of zap_pte_range is gone so most of overhead(about 0.7ms) comes from activate_page via mark_page_accessed. Thus, if there are LRU contention, that 0.7ms could accumulate up to several ms. So this patch adds a check for need_resched() in the loop, and a preemption point if necessary. Link: http://lkml.kernel.org/r/20190731061440.GC155569@google.com Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Miguel de Dios <migueldedios@google.com> Reported-by: Wei Wang <wvw@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 00:02:24 +00:00
if (need_resched())
break;
if (pte_present(ptent)) {
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
max_nr = (end - addr) / PAGE_SIZE;
nr = zap_present_ptes(tlb, vma, pte, ptent, max_nr,
addr, details, rss, &force_flush,
&force_break);
mm/memory: factor out zapping of present pte into zap_present_pte() Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3. This series is based on [1]. Similar to what we did with fork(), let's implement PTE batching during unmap/zap when processing PTE-mapped THPs. We collect consecutive PTEs that map consecutive pages of the same large folio, making sure that the other PTE bits are compatible, and (a) adjust the refcount only once per batch, (b) call rmap handling functions only once per batch, (c) perform batch PTE setting/updates and (d) perform TLB entry removal once per batch. Ryan was previously working on this in the context of cont-pte for arm64, int latest iteration [2] with a focus on arm6 with cont-pte only. This series implements the optimization for all architectures, independent of such PTE bits, teaches MMU gather/TLB code to be fully aware of such large-folio-pages batches as well, and amkes use of our new rmap batching function when removing the rmap. To achieve that, we have to enlighten MMU gather / page freeing code (i.e., everything that consumes encoded_page) to process unmapping of consecutive pages that all belong to the same large folio. I'm being very careful to not degrade order-0 performance, and it looks like I managed to achieve that. While this series should -- similar to [1] -- be beneficial for adding cont-pte support on arm64[2], it's one of the requirements for maintaining a total mapcount[3] for large folios with minimal added overhead and further changes[4] that build up on top of the total mapcount. Independent of all that, this series results in a speedup during munmap() and similar unmapping (process teardown, MADV_DONTNEED on larger ranges) with PTE-mapped THP, which is the default with THPs that are smaller than a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]). On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by PTE-mapped folios of the same size (stddev < 1%) results in the following runtimes for munmap() in seconds (shorter is better): Folio Size | mm-unstable | New | Change --------------------------------------------- 4KiB | 0.058110 | 0.057715 | - 1% 16KiB | 0.044198 | 0.035469 | -20% 32KiB | 0.034216 | 0.023522 | -31% 64KiB | 0.029207 | 0.018434 | -37% 128KiB | 0.026579 | 0.014026 | -47% 256KiB | 0.025130 | 0.011756 | -53% 512KiB | 0.024292 | 0.010703 | -56% 1024KiB | 0.023812 | 0.010294 | -57% 2048KiB | 0.023785 | 0.009910 | -58% [1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com [2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com [3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com [4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com [5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com This patch (of 10): Let's prepare for further changes by factoring out processing of present PTEs. Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:26 +00:00
if (unlikely(force_break)) {
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
addr += nr * PAGE_SIZE;
mm: mmu_gather rework Rework the existing mmu_gather infrastructure. The direct purpose of these patches was to allow preemptible mmu_gather, but even without that I think these patches provide an improvement to the status quo. The first 9 patches rework the mmu_gather infrastructure. For review purpose I've split them into generic and per-arch patches with the last of those a generic cleanup. The next patch provides generic RCU page-table freeing, and the followup is a patch converting s390 to use this. I've also got 4 patches from DaveM lined up (not included in this series) that uses this to implement gup_fast() for sparc64. Then there is one patch that extends the generic mmu_gather batching. After that follow the mm preemptibility patches, these make part of the mm a lot more preemptible. It converts i_mmap_lock and anon_vma->lock to mutexes which together with the mmu_gather rework makes mmu_gather preemptible as well. Making i_mmap_lock a mutex also enables a clean-up of the truncate code. This also allows for preemptible mmu_notifiers, something that XPMEM I think wants. Furthermore, it removes the new and universially detested unmap_mutex. This patch: Remove the first obstacle towards a fully preemptible mmu_gather. The current scheme assumes mmu_gather is always done with preemption disabled and uses per-cpu storage for the page batches. Change this to try and allocate a page for batching and in case of failure, use a small on-stack array to make some progress. Preemptible mmu_gather is desired in general and usable once i_mmap_lock becomes a mutex. Doing it before the mutex conversion saves us from having to rework the code by moving the mmu_gather bits inside the pte_lock. Also avoid flushing the tlb batches from under the pte lock, this is useful even without the i_mmap_lock conversion as it significantly reduces pte lock hold times. [akpm@linux-foundation.org: fix comment tpyo] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:11:45 +00:00
break;
}
continue;
}
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
entry = pte_to_swp_entry(ptent);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
if (is_device_private_entry(entry) ||
is_device_exclusive_entry(entry)) {
page = pfn_swap_entry_to_page(entry);
folio = page_folio(page);
if (unlikely(!should_zap_folio(details, folio)))
continue;
/*
* Both device private/exclusive mappings should only
* work with anonymous page so far, so we don't need to
* consider uffd-wp bit when zap. For more information,
* see zap_install_uffd_wp_if_needed().
*/
WARN_ON_ONCE(!vma_is_anonymous(vma));
rss[mm_counter(folio)]--;
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
if (is_device_private_entry(entry))
folio_remove_rmap_pte(folio, page, vma);
folio_put(folio);
} else if (!non_swap_entry(entry)) {
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
max_nr = (end - addr) / PAGE_SIZE;
nr = swap_pte_batch(pte, max_nr, ptent);
/* Genuine swap entries, hence a private anon pages */
mm: don't skip swap entry even if zap_details specified Patch series "mm: Rework zap ptes on swap entries", v5. Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them. Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered. However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that. Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range(). Only patch 1 needs to be backported to stable if necessary. This patch (of 4): The "details" pointer shouldn't be the token to decide whether we should skip swap entries. For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out. Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them. A reproducer of the problem: ===8<=== #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <stdio.h> #include <assert.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int page_size; int shmem_fd; char *buffer; void main(void) { int ret; char val; page_size = getpagesize(); shmem_fd = memfd_create("test", 0); assert(shmem_fd >= 0); ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE, MAP_PRIVATE, shmem_fd, 0); assert(buffer != MAP_FAILED); /* Write private page, swap it out */ buffer[page_size] = 1; madvise(buffer, page_size * 2, MADV_PAGEOUT); /* This should drop private buffer[page_size] already */ ret = ftruncate(shmem_fd, page_size); assert(ret == 0); /* Recover the size */ ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); /* Re-read the data, it should be all zero */ val = buffer[page_size]; if (val == 0) printf("Good\n"); else printf("BUG\n"); } ===8<=== We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous. Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified. This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too. To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true. The issue seems to exist starting from the initial commit of git. [peterx@redhat.com: comment tweaks] Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:15 +00:00
if (!should_zap_cows(details))
continue;
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
rss[MM_SWAPENTS] -= nr;
free_swap_and_cache_nr(entry, nr);
mm: don't skip swap entry even if zap_details specified Patch series "mm: Rework zap ptes on swap entries", v5. Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them. Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered. However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that. Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range(). Only patch 1 needs to be backported to stable if necessary. This patch (of 4): The "details" pointer shouldn't be the token to decide whether we should skip swap entries. For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out. Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them. A reproducer of the problem: ===8<=== #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <stdio.h> #include <assert.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int page_size; int shmem_fd; char *buffer; void main(void) { int ret; char val; page_size = getpagesize(); shmem_fd = memfd_create("test", 0); assert(shmem_fd >= 0); ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE, MAP_PRIVATE, shmem_fd, 0); assert(buffer != MAP_FAILED); /* Write private page, swap it out */ buffer[page_size] = 1; madvise(buffer, page_size * 2, MADV_PAGEOUT); /* This should drop private buffer[page_size] already */ ret = ftruncate(shmem_fd, page_size); assert(ret == 0); /* Recover the size */ ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); /* Re-read the data, it should be all zero */ val = buffer[page_size]; if (val == 0) printf("Good\n"); else printf("BUG\n"); } ===8<=== We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous. Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified. This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too. To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true. The issue seems to exist starting from the initial commit of git. [peterx@redhat.com: comment tweaks] Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:15 +00:00
} else if (is_migration_entry(entry)) {
folio = pfn_swap_entry_folio(entry);
if (!should_zap_folio(details, folio))
mm: don't skip swap entry even if zap_details specified Patch series "mm: Rework zap ptes on swap entries", v5. Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them. Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered. However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that. Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range(). Only patch 1 needs to be backported to stable if necessary. This patch (of 4): The "details" pointer shouldn't be the token to decide whether we should skip swap entries. For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out. Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them. A reproducer of the problem: ===8<=== #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <stdio.h> #include <assert.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int page_size; int shmem_fd; char *buffer; void main(void) { int ret; char val; page_size = getpagesize(); shmem_fd = memfd_create("test", 0); assert(shmem_fd >= 0); ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE, MAP_PRIVATE, shmem_fd, 0); assert(buffer != MAP_FAILED); /* Write private page, swap it out */ buffer[page_size] = 1; madvise(buffer, page_size * 2, MADV_PAGEOUT); /* This should drop private buffer[page_size] already */ ret = ftruncate(shmem_fd, page_size); assert(ret == 0); /* Recover the size */ ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); /* Re-read the data, it should be all zero */ val = buffer[page_size]; if (val == 0) printf("Good\n"); else printf("BUG\n"); } ===8<=== We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous. Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified. This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too. To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true. The issue seems to exist starting from the initial commit of git. [peterx@redhat.com: comment tweaks] Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:15 +00:00
continue;
rss[mm_counter(folio)]--;
} else if (pte_marker_entry_uffd_wp(entry)) {
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
/*
* For anon: always drop the marker; for file: only
* drop the marker if explicitly requested.
*/
if (!vma_is_anonymous(vma) &&
!zap_drop_file_uffd_wp(details))
continue;
mm/swapfile: unuse_pte can map random data if swap read fails Patch series "A few fixup patches for mm", v4. This series contains a few patches to avoid mapping random data if swap read fails and fix lost swap bits in unuse_pte. Also we free hwpoison and swapin error entry in madvise_free_pte_range and so on. More details can be found in the respective changelogs. This patch (of 5): There is a bug in unuse_pte(): when swap page happens to be unreadable, page filled with random data is mapped into user address space. In case of error, a special swap entry indicating swap read fails is set to the page table. So the swapcache page can be freed and the user won't end up with a permanently mounted swap because a sector is bad. And if the page is accessed later, the user process will be killed so that corrupted data is never consumed. On the other hand, if the page is never accessed, the user won't even notice it. Link: https://lkml.kernel.org/r/20220519125030.21486-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220519125030.21486-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Howells <dhowells@redhat.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 12:50:26 +00:00
} else if (is_hwpoison_entry(entry) ||
mm: make PTE_MARKER_SWAPIN_ERROR more general Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD", v4. This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4 for a detailed description of the feature. This patch (of 8): Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement UFFDIO_POISON, so make some various preparations for that: First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be confusing since we're going to re-use it for something not really related to swap. This can be particularly confusing for things like hugetlbfs, which doesn't support swap whatsoever. Also rename some various helper functions. Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap. But, since we're going to re-use it, we want it to go ahead and copy it just like non-hugetlbfs memory does today. Since the code to do this is more complicated now, pull it out into a helper which can be re-used in both places. While we're at it, also make it slightly more explicit in its handling of e.g. uffd wp markers. For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't matter, e.g. a userspace program would receive a SIGBUS either way. But for UFFDIO_POISON, this change will let KVM guests get an MCE out of the box, instead of giving a SIGBUS to the hypervisor and requiring it to somehow inject an MCE. Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today because the lack of swap support means we'll never end up with such a PTE anyway, but this behavior will be needed once such entries *can* show up via UFFDIO_POISON. Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
is_poisoned_swp_entry(entry)) {
mm: don't skip swap entry even if zap_details specified Patch series "mm: Rework zap ptes on swap entries", v5. Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them. Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered. However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that. Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range(). Only patch 1 needs to be backported to stable if necessary. This patch (of 4): The "details" pointer shouldn't be the token to decide whether we should skip swap entries. For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out. Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them. A reproducer of the problem: ===8<=== #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <stdio.h> #include <assert.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int page_size; int shmem_fd; char *buffer; void main(void) { int ret; char val; page_size = getpagesize(); shmem_fd = memfd_create("test", 0); assert(shmem_fd >= 0); ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE, MAP_PRIVATE, shmem_fd, 0); assert(buffer != MAP_FAILED); /* Write private page, swap it out */ buffer[page_size] = 1; madvise(buffer, page_size * 2, MADV_PAGEOUT); /* This should drop private buffer[page_size] already */ ret = ftruncate(shmem_fd, page_size); assert(ret == 0); /* Recover the size */ ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); /* Re-read the data, it should be all zero */ val = buffer[page_size]; if (val == 0) printf("Good\n"); else printf("BUG\n"); } ===8<=== We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous. Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified. This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too. To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true. The issue seems to exist starting from the initial commit of git. [peterx@redhat.com: comment tweaks] Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:15 +00:00
if (!should_zap_cows(details))
continue;
} else {
/* We should have covered all the swap entry types */
pr_alert("unrecognized swap entry 0x%lx\n", entry.val);
mm: don't skip swap entry even if zap_details specified Patch series "mm: Rework zap ptes on swap entries", v5. Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them. Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered. However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that. Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range(). Only patch 1 needs to be backported to stable if necessary. This patch (of 4): The "details" pointer shouldn't be the token to decide whether we should skip swap entries. For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out. Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them. A reproducer of the problem: ===8<=== #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <stdio.h> #include <assert.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int page_size; int shmem_fd; char *buffer; void main(void) { int ret; char val; page_size = getpagesize(); shmem_fd = memfd_create("test", 0); assert(shmem_fd >= 0); ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE, MAP_PRIVATE, shmem_fd, 0); assert(buffer != MAP_FAILED); /* Write private page, swap it out */ buffer[page_size] = 1; madvise(buffer, page_size * 2, MADV_PAGEOUT); /* This should drop private buffer[page_size] already */ ret = ftruncate(shmem_fd, page_size); assert(ret == 0); /* Recover the size */ ret = ftruncate(shmem_fd, page_size * 2); assert(ret == 0); /* Re-read the data, it should be all zero */ val = buffer[page_size]; if (val == 0) printf("Good\n"); else printf("BUG\n"); } ===8<=== We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous. Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified. This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too. To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true. The issue seems to exist starting from the initial commit of git. [peterx@redhat.com: comment tweaks] Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:15 +00:00
WARN_ON_ONCE(1);
}
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
clear_not_present_full_ptes(mm, addr, pte, nr, tlb->fullmm);
zap_install_uffd_wp_if_needed(vma, addr, pte, nr, details, ptent);
mm/memory: optimize unmap/zap with PTE-mapped THP Similar to how we optimized fork(), let's implement PTE batching when consecutive (present) PTEs map consecutive pages of the same large folio. Most infrastructure we need for batching (mmu gather, rmap) is already there. We only have to add get_and_clear_full_ptes() and clear_full_ptes(). Similarly, extend zap_install_uffd_wp_if_needed() to process a PTE range. We won't bother sanity-checking the mapcount of all subpages, but only check the mapcount of the first subpage we process. If there is a real problem hiding somewhere, we can trigger it simply by using small folios, or when we zap single pages of a large folio. Ideally, we had that check in rmap code (including for delayed rmap), but then we cannot print the PTE. Let's keep it simple for now. If we ever have a cheap folio_mapcount(), we might just want to check for underflows there. To keep small folios as fast as possible force inlining of a specialized variant using __always_inline with nr=1. Link: https://lkml.kernel.org/r/20240214204435.167852-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-14 20:44:35 +00:00
} while (pte += nr, addr += PAGE_SIZE * nr, addr != end);
add_mm_rss_vec(mm, rss);
arch_leave_lazy_mmu_mode();
/* Do the actual TLB flush before dropping ptl */
mm: delay page_remove_rmap() until after the TLB has been flushed When we remove a page table entry, we are very careful to only free the page after we have flushed the TLB, because other CPUs could still be using the page through stale TLB entries until after the flush. However, we have removed the rmap entry for that page early, which means that functions like folio_mkclean() would end up not serializing with the page table lock because the page had already been made invisible to rmap. And that is a problem, because while the TLB entry exists, we could end up with the following situation: (a) one CPU could come in and clean it, never seeing our mapping of the page (b) another CPU could continue to use the stale and dirty TLB entry and continue to write to said page resulting in a page that has been dirtied, but then marked clean again, all while another CPU might have dirtied it some more. End result: possibly lost dirty data. This extends our current TLB gather infrastructure to optionally track a "should I do a delayed page_remove_rmap() for this page after flushing the TLB". It uses the newly introduced 'encoded page pointer' to do that without having to keep separate data around. Note, this is complicated by a couple of issues: - we want to delay the rmap removal, but not past the page table lock, because that simplifies the memcg accounting - only SMP configurations want to delay TLB flushing, since on UP there are obviously no remote TLBs to worry about, and the page table lock means there are no preemption issues either - s390 has its own mmu_gather model that doesn't delay TLB flushing, and as a result also does not want the delayed rmap. As such, we can treat S390 like the UP case and use a common fallback for the "no delays" case. - we can track an enormous number of pages in our mmu_gather structure, with MAX_GATHER_BATCH_COUNT batches of MAX_TABLE_BATCH pages each, all set up to be approximately 10k pending pages. We do not want to have a huge number of batched pages that we then need to check for delayed rmap handling inside the page table lock. Particularly that last point results in a noteworthy detail, where the normal page batch gathering is limited once we have delayed rmaps pending, in such a way that only the last batch (the so-called "active batch") in the mmu_gather structure can have any delayed entries. NOTE! While the "possibly lost dirty data" sounds catastrophic, for this all to happen you need to have a user thread doing either madvise() with MADV_DONTNEED or a full re-mmap() of the area concurrently with another thread continuing to use said mapping. So arguably this is about user space doing crazy things, but from a VM consistency standpoint it's better if we track the dirty bit properly even when user space goes off the rails. [akpm@linux-foundation.org: fix UP build, per Linus] Link: https://lore.kernel.org/all/B88D3073-440A-41C7-95F4-895D3F657EF2@gmail.com/ Link: https://lkml.kernel.org/r/20221109203051.1835763-4-torvalds@linux-foundation.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Hugh Dickins <hughd@google.com> Reported-by: Nadav Amit <nadav.amit@gmail.com> Tested-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-09 20:30:51 +00:00
if (force_flush) {
tlb_flush_mmu_tlbonly(tlb);
tlb_flush_rmaps(tlb, vma);
mm: delay page_remove_rmap() until after the TLB has been flushed When we remove a page table entry, we are very careful to only free the page after we have flushed the TLB, because other CPUs could still be using the page through stale TLB entries until after the flush. However, we have removed the rmap entry for that page early, which means that functions like folio_mkclean() would end up not serializing with the page table lock because the page had already been made invisible to rmap. And that is a problem, because while the TLB entry exists, we could end up with the following situation: (a) one CPU could come in and clean it, never seeing our mapping of the page (b) another CPU could continue to use the stale and dirty TLB entry and continue to write to said page resulting in a page that has been dirtied, but then marked clean again, all while another CPU might have dirtied it some more. End result: possibly lost dirty data. This extends our current TLB gather infrastructure to optionally track a "should I do a delayed page_remove_rmap() for this page after flushing the TLB". It uses the newly introduced 'encoded page pointer' to do that without having to keep separate data around. Note, this is complicated by a couple of issues: - we want to delay the rmap removal, but not past the page table lock, because that simplifies the memcg accounting - only SMP configurations want to delay TLB flushing, since on UP there are obviously no remote TLBs to worry about, and the page table lock means there are no preemption issues either - s390 has its own mmu_gather model that doesn't delay TLB flushing, and as a result also does not want the delayed rmap. As such, we can treat S390 like the UP case and use a common fallback for the "no delays" case. - we can track an enormous number of pages in our mmu_gather structure, with MAX_GATHER_BATCH_COUNT batches of MAX_TABLE_BATCH pages each, all set up to be approximately 10k pending pages. We do not want to have a huge number of batched pages that we then need to check for delayed rmap handling inside the page table lock. Particularly that last point results in a noteworthy detail, where the normal page batch gathering is limited once we have delayed rmaps pending, in such a way that only the last batch (the so-called "active batch") in the mmu_gather structure can have any delayed entries. NOTE! While the "possibly lost dirty data" sounds catastrophic, for this all to happen you need to have a user thread doing either madvise() with MADV_DONTNEED or a full re-mmap() of the area concurrently with another thread continuing to use said mapping. So arguably this is about user space doing crazy things, but from a VM consistency standpoint it's better if we track the dirty bit properly even when user space goes off the rails. [akpm@linux-foundation.org: fix UP build, per Linus] Link: https://lore.kernel.org/all/B88D3073-440A-41C7-95F4-895D3F657EF2@gmail.com/ Link: https://lkml.kernel.org/r/20221109203051.1835763-4-torvalds@linux-foundation.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Hugh Dickins <hughd@google.com> Reported-by: Nadav Amit <nadav.amit@gmail.com> Tested-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-09 20:30:51 +00:00
}
pte_unmap_unlock(start_pte, ptl);
/*
* If we forced a TLB flush (either due to running out of
* batch buffers or because we needed to flush dirty TLB
* entries before releasing the ptl), free the batched
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
* memory too. Come back again if we didn't do everything.
*/
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (force_flush)
tlb_flush_mmu(tlb);
mm: mmu_gather rework Rework the existing mmu_gather infrastructure. The direct purpose of these patches was to allow preemptible mmu_gather, but even without that I think these patches provide an improvement to the status quo. The first 9 patches rework the mmu_gather infrastructure. For review purpose I've split them into generic and per-arch patches with the last of those a generic cleanup. The next patch provides generic RCU page-table freeing, and the followup is a patch converting s390 to use this. I've also got 4 patches from DaveM lined up (not included in this series) that uses this to implement gup_fast() for sparc64. Then there is one patch that extends the generic mmu_gather batching. After that follow the mm preemptibility patches, these make part of the mm a lot more preemptible. It converts i_mmap_lock and anon_vma->lock to mutexes which together with the mmu_gather rework makes mmu_gather preemptible as well. Making i_mmap_lock a mutex also enables a clean-up of the truncate code. This also allows for preemptible mmu_notifiers, something that XPMEM I think wants. Furthermore, it removes the new and universially detested unmap_mutex. This patch: Remove the first obstacle towards a fully preemptible mmu_gather. The current scheme assumes mmu_gather is always done with preemption disabled and uses per-cpu storage for the page batches. Change this to try and allocate a page for batching and in case of failure, use a small on-stack array to make some progress. Preemptible mmu_gather is desired in general and usable once i_mmap_lock becomes a mutex. Doing it before the mutex conversion saves us from having to rework the code by moving the mmu_gather bits inside the pte_lock. Also avoid flushing the tlb batches from under the pte lock, this is useful even without the i_mmap_lock conversion as it significantly reduces pte lock hold times. [akpm@linux-foundation.org: fix comment tpyo] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:11:45 +00:00
return addr;
}
static inline unsigned long zap_pmd_range(struct mmu_gather *tlb,
2005-10-30 01:16:12 +00:00
struct vm_area_struct *vma, pud_t *pud,
unsigned long addr, unsigned long end,
struct zap_details *details)
{
pmd_t *pmd;
unsigned long next;
pmd = pmd_offset(pud, addr);
do {
next = pmd_addr_end(addr, end);
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
if (is_swap_pmd(*pmd) || pmd_trans_huge(*pmd) || pmd_devmap(*pmd)) {
if (next - addr != HPAGE_PMD_SIZE)
__split_huge_pmd(vma, pmd, addr, false, NULL);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
else if (zap_huge_pmd(tlb, vma, pmd, addr)) {
addr = next;
continue;
}
thp: transparent hugepage core Lately I've been working to make KVM use hugepages transparently without the usual restrictions of hugetlbfs. Some of the restrictions I'd like to see removed: 1) hugepages have to be swappable or the guest physical memory remains locked in RAM and can't be paged out to swap 2) if a hugepage allocation fails, regular pages should be allocated instead and mixed in the same vma without any failure and without userland noticing 3) if some task quits and more hugepages become available in the buddy, guest physical memory backed by regular pages should be relocated on hugepages automatically in regions under madvise(MADV_HUGEPAGE) (ideally event driven by waking up the kernel deamon if the order=HPAGE_PMD_SHIFT-PAGE_SHIFT list becomes not null) 4) avoidance of reservation and maximization of use of hugepages whenever possible. Reservation (needed to avoid runtime fatal faliures) may be ok for 1 machine with 1 database with 1 database cache with 1 database cache size known at boot time. It's definitely not feasible with a virtualization hypervisor usage like RHEV-H that runs an unknown number of virtual machines with an unknown size of each virtual machine with an unknown amount of pagecache that could be potentially useful in the host for guest not using O_DIRECT (aka cache=off). hugepages in the virtualization hypervisor (and also in the guest!) are much more important than in a regular host not using virtualization, becasue with NPT/EPT they decrease the tlb-miss cacheline accesses from 24 to 19 in case only the hypervisor uses transparent hugepages, and they decrease the tlb-miss cacheline accesses from 19 to 15 in case both the linux hypervisor and the linux guest both uses this patch (though the guest will limit the addition speedup to anonymous regions only for now...). Even more important is that the tlb miss handler is much slower on a NPT/EPT guest than for a regular shadow paging or no-virtualization scenario. So maximizing the amount of virtual memory cached by the TLB pays off significantly more with NPT/EPT than without (even if there would be no significant speedup in the tlb-miss runtime). The first (and more tedious) part of this work requires allowing the VM to handle anonymous hugepages mixed with regular pages transparently on regular anonymous vmas. This is what this patch tries to achieve in the least intrusive possible way. We want hugepages and hugetlb to be used in a way so that all applications can benefit without changes (as usual we leverage the KVM virtualization design: by improving the Linux VM at large, KVM gets the performance boost too). The most important design choice is: always fallback to 4k allocation if the hugepage allocation fails! This is the _very_ opposite of some large pagecache patches that failed with -EIO back then if a 64k (or similar) allocation failed... Second important decision (to reduce the impact of the feature on the existing pagetable handling code) is that at any time we can split an hugepage into 512 regular pages and it has to be done with an operation that can't fail. This way the reliability of the swapping isn't decreased (no need to allocate memory when we are short on memory to swap) and it's trivial to plug a split_huge_page* one-liner where needed without polluting the VM. Over time we can teach mprotect, mremap and friends to handle pmd_trans_huge natively without calling split_huge_page*. The fact it can't fail isn't just for swap: if split_huge_page would return -ENOMEM (instead of the current void) we'd need to rollback the mprotect from the middle of it (ideally including undoing the split_vma) which would be a big change and in the very wrong direction (it'd likely be simpler not to call split_huge_page at all and to teach mprotect and friends to handle hugepages instead of rolling them back from the middle). In short the very value of split_huge_page is that it can't fail. The collapsing and madvise(MADV_HUGEPAGE) part will remain separated and incremental and it'll just be an "harmless" addition later if this initial part is agreed upon. It also should be noted that locking-wise replacing regular pages with hugepages is going to be very easy if compared to what I'm doing below in split_huge_page, as it will only happen when page_count(page) matches page_mapcount(page) if we can take the PG_lock and mmap_sem in write mode. collapse_huge_page will be a "best effort" that (unlike split_huge_page) can fail at the minimal sign of trouble and we can try again later. collapse_huge_page will be similar to how KSM works and the madvise(MADV_HUGEPAGE) will work similar to madvise(MADV_MERGEABLE). The default I like is that transparent hugepages are used at page fault time. This can be changed with /sys/kernel/mm/transparent_hugepage/enabled. The control knob can be set to three values "always", "madvise", "never" which mean respectively that hugepages are always used, or only inside madvise(MADV_HUGEPAGE) regions, or never used. /sys/kernel/mm/transparent_hugepage/defrag instead controls if the hugepage allocation should defrag memory aggressively "always", only inside "madvise" regions, or "never". The pmd_trans_splitting/pmd_trans_huge locking is very solid. The put_page (from get_user_page users that can't use mmu notifier like O_DIRECT) that runs against a __split_huge_page_refcount instead was a pain to serialize in a way that would result always in a coherent page count for both tail and head. I think my locking solution with a compound_lock taken only after the page_first is valid and is still a PageHead should be safe but it surely needs review from SMP race point of view. In short there is no current existing way to serialize the O_DIRECT final put_page against split_huge_page_refcount so I had to invent a new one (O_DIRECT loses knowledge on the mapping status by the time gup_fast returns so...). And I didn't want to impact all gup/gup_fast users for now, maybe if we change the gup interface substantially we can avoid this locking, I admit I didn't think too much about it because changing the gup unpinning interface would be invasive. If we ignored O_DIRECT we could stick to the existing compound refcounting code, by simply adding a get_user_pages_fast_flags(foll_flags) where KVM (and any other mmu notifier user) would call it without FOLL_GET (and if FOLL_GET isn't set we'd just BUG_ON if nobody registered itself in the current task mmu notifier list yet). But O_DIRECT is fundamental for decent performance of virtualized I/O on fast storage so we can't avoid it to solve the race of put_page against split_huge_page_refcount to achieve a complete hugepage feature for KVM. Swap and oom works fine (well just like with regular pages ;). MMU notifier is handled transparently too, with the exception of the young bit on the pmd, that didn't have a range check but I think KVM will be fine because the whole point of hugepages is that EPT/NPT will also use a huge pmd when they notice gup returns pages with PageCompound set, so they won't care of a range and there's just the pmd young bit to check in that case. NOTE: in some cases if the L2 cache is small, this may slowdown and waste memory during COWs because 4M of memory are accessed in a single fault instead of 8k (the payoff is that after COW the program can run faster). So we might want to switch the copy_huge_page (and clear_huge_page too) to not temporal stores. I also extensively researched ways to avoid this cache trashing with a full prefault logic that would cow in 8k/16k/32k/64k up to 1M (I can send those patches that fully implemented prefault) but I concluded they're not worth it and they add an huge additional complexity and they remove all tlb benefits until the full hugepage has been faulted in, to save a little bit of memory and some cache during app startup, but they still don't improve substantially the cache-trashing during startup if the prefault happens in >4k chunks. One reason is that those 4k pte entries copied are still mapped on a perfectly cache-colored hugepage, so the trashing is the worst one can generate in those copies (cow of 4k page copies aren't so well colored so they trashes less, but again this results in software running faster after the page fault). Those prefault patches allowed things like a pte where post-cow pages were local 4k regular anon pages and the not-yet-cowed pte entries were pointing in the middle of some hugepage mapped read-only. If it doesn't payoff substantially with todays hardware it will payoff even less in the future with larger l2 caches, and the prefault logic would blot the VM a lot. If one is emebdded transparent_hugepage can be disabled during boot with sysfs or with the boot commandline parameter transparent_hugepage=0 (or transparent_hugepage=2 to restrict hugepages inside madvise regions) that will ensure not a single hugepage is allocated at boot time. It is simple enough to just disable transparent hugepage globally and let transparent hugepages be allocated selectively by applications in the MADV_HUGEPAGE region (both at page fault time, and if enabled with the collapse_huge_page too through the kernel daemon). This patch supports only hugepages mapped in the pmd, archs that have smaller hugepages will not fit in this patch alone. Also some archs like power have certain tlb limits that prevents mixing different page size in the same regions so they will not fit in this framework that requires "graceful fallback" to basic PAGE_SIZE in case of physical memory fragmentation. hugetlbfs remains a perfect fit for those because its software limits happen to match the hardware limits. hugetlbfs also remains a perfect fit for hugepage sizes like 1GByte that cannot be hoped to be found not fragmented after a certain system uptime and that would be very expensive to defragment with relocation, so requiring reservation. hugetlbfs is the "reservation way", the point of transparent hugepages is not to have any reservation at all and maximizing the use of cache and hugepages at all times automatically. Some performance result: vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largep ages3 memset page fault 1566023 memset tlb miss 453854 memset second tlb miss 453321 random access tlb miss 41635 random access second tlb miss 41658 vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largepages3 memset page fault 1566471 memset tlb miss 453375 memset second tlb miss 453320 random access tlb miss 41636 random access second tlb miss 41637 vmx andrea # ./largepages3 memset page fault 1566642 memset tlb miss 453417 memset second tlb miss 453313 random access tlb miss 41630 random access second tlb miss 41647 vmx andrea # ./largepages3 memset page fault 1566872 memset tlb miss 453418 memset second tlb miss 453315 random access tlb miss 41618 random access second tlb miss 41659 vmx andrea # echo 0 > /proc/sys/vm/transparent_hugepage vmx andrea # ./largepages3 memset page fault 2182476 memset tlb miss 460305 memset second tlb miss 460179 random access tlb miss 44483 random access second tlb miss 44186 vmx andrea # ./largepages3 memset page fault 2182791 memset tlb miss 460742 memset second tlb miss 459962 random access tlb miss 43981 random access second tlb miss 43988 ============ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/time.h> #define SIZE (3UL*1024*1024*1024) int main() { char *p = malloc(SIZE), *p2; struct timeval before, after; gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset page fault %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); return 0; } ============ Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 23:46:52 +00:00
/* fall through */
} else if (details && details->single_folio &&
folio_test_pmd_mappable(details->single_folio) &&
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
next - addr == HPAGE_PMD_SIZE && pmd_none(*pmd)) {
spinlock_t *ptl = pmd_lock(tlb->mm, pmd);
/*
* Take and drop THP pmd lock so that we cannot return
* prematurely, while zap_huge_pmd() has cleared *pmd,
* but not yet decremented compound_mapcount().
*/
spin_unlock(ptl);
thp: transparent hugepage core Lately I've been working to make KVM use hugepages transparently without the usual restrictions of hugetlbfs. Some of the restrictions I'd like to see removed: 1) hugepages have to be swappable or the guest physical memory remains locked in RAM and can't be paged out to swap 2) if a hugepage allocation fails, regular pages should be allocated instead and mixed in the same vma without any failure and without userland noticing 3) if some task quits and more hugepages become available in the buddy, guest physical memory backed by regular pages should be relocated on hugepages automatically in regions under madvise(MADV_HUGEPAGE) (ideally event driven by waking up the kernel deamon if the order=HPAGE_PMD_SHIFT-PAGE_SHIFT list becomes not null) 4) avoidance of reservation and maximization of use of hugepages whenever possible. Reservation (needed to avoid runtime fatal faliures) may be ok for 1 machine with 1 database with 1 database cache with 1 database cache size known at boot time. It's definitely not feasible with a virtualization hypervisor usage like RHEV-H that runs an unknown number of virtual machines with an unknown size of each virtual machine with an unknown amount of pagecache that could be potentially useful in the host for guest not using O_DIRECT (aka cache=off). hugepages in the virtualization hypervisor (and also in the guest!) are much more important than in a regular host not using virtualization, becasue with NPT/EPT they decrease the tlb-miss cacheline accesses from 24 to 19 in case only the hypervisor uses transparent hugepages, and they decrease the tlb-miss cacheline accesses from 19 to 15 in case both the linux hypervisor and the linux guest both uses this patch (though the guest will limit the addition speedup to anonymous regions only for now...). Even more important is that the tlb miss handler is much slower on a NPT/EPT guest than for a regular shadow paging or no-virtualization scenario. So maximizing the amount of virtual memory cached by the TLB pays off significantly more with NPT/EPT than without (even if there would be no significant speedup in the tlb-miss runtime). The first (and more tedious) part of this work requires allowing the VM to handle anonymous hugepages mixed with regular pages transparently on regular anonymous vmas. This is what this patch tries to achieve in the least intrusive possible way. We want hugepages and hugetlb to be used in a way so that all applications can benefit without changes (as usual we leverage the KVM virtualization design: by improving the Linux VM at large, KVM gets the performance boost too). The most important design choice is: always fallback to 4k allocation if the hugepage allocation fails! This is the _very_ opposite of some large pagecache patches that failed with -EIO back then if a 64k (or similar) allocation failed... Second important decision (to reduce the impact of the feature on the existing pagetable handling code) is that at any time we can split an hugepage into 512 regular pages and it has to be done with an operation that can't fail. This way the reliability of the swapping isn't decreased (no need to allocate memory when we are short on memory to swap) and it's trivial to plug a split_huge_page* one-liner where needed without polluting the VM. Over time we can teach mprotect, mremap and friends to handle pmd_trans_huge natively without calling split_huge_page*. The fact it can't fail isn't just for swap: if split_huge_page would return -ENOMEM (instead of the current void) we'd need to rollback the mprotect from the middle of it (ideally including undoing the split_vma) which would be a big change and in the very wrong direction (it'd likely be simpler not to call split_huge_page at all and to teach mprotect and friends to handle hugepages instead of rolling them back from the middle). In short the very value of split_huge_page is that it can't fail. The collapsing and madvise(MADV_HUGEPAGE) part will remain separated and incremental and it'll just be an "harmless" addition later if this initial part is agreed upon. It also should be noted that locking-wise replacing regular pages with hugepages is going to be very easy if compared to what I'm doing below in split_huge_page, as it will only happen when page_count(page) matches page_mapcount(page) if we can take the PG_lock and mmap_sem in write mode. collapse_huge_page will be a "best effort" that (unlike split_huge_page) can fail at the minimal sign of trouble and we can try again later. collapse_huge_page will be similar to how KSM works and the madvise(MADV_HUGEPAGE) will work similar to madvise(MADV_MERGEABLE). The default I like is that transparent hugepages are used at page fault time. This can be changed with /sys/kernel/mm/transparent_hugepage/enabled. The control knob can be set to three values "always", "madvise", "never" which mean respectively that hugepages are always used, or only inside madvise(MADV_HUGEPAGE) regions, or never used. /sys/kernel/mm/transparent_hugepage/defrag instead controls if the hugepage allocation should defrag memory aggressively "always", only inside "madvise" regions, or "never". The pmd_trans_splitting/pmd_trans_huge locking is very solid. The put_page (from get_user_page users that can't use mmu notifier like O_DIRECT) that runs against a __split_huge_page_refcount instead was a pain to serialize in a way that would result always in a coherent page count for both tail and head. I think my locking solution with a compound_lock taken only after the page_first is valid and is still a PageHead should be safe but it surely needs review from SMP race point of view. In short there is no current existing way to serialize the O_DIRECT final put_page against split_huge_page_refcount so I had to invent a new one (O_DIRECT loses knowledge on the mapping status by the time gup_fast returns so...). And I didn't want to impact all gup/gup_fast users for now, maybe if we change the gup interface substantially we can avoid this locking, I admit I didn't think too much about it because changing the gup unpinning interface would be invasive. If we ignored O_DIRECT we could stick to the existing compound refcounting code, by simply adding a get_user_pages_fast_flags(foll_flags) where KVM (and any other mmu notifier user) would call it without FOLL_GET (and if FOLL_GET isn't set we'd just BUG_ON if nobody registered itself in the current task mmu notifier list yet). But O_DIRECT is fundamental for decent performance of virtualized I/O on fast storage so we can't avoid it to solve the race of put_page against split_huge_page_refcount to achieve a complete hugepage feature for KVM. Swap and oom works fine (well just like with regular pages ;). MMU notifier is handled transparently too, with the exception of the young bit on the pmd, that didn't have a range check but I think KVM will be fine because the whole point of hugepages is that EPT/NPT will also use a huge pmd when they notice gup returns pages with PageCompound set, so they won't care of a range and there's just the pmd young bit to check in that case. NOTE: in some cases if the L2 cache is small, this may slowdown and waste memory during COWs because 4M of memory are accessed in a single fault instead of 8k (the payoff is that after COW the program can run faster). So we might want to switch the copy_huge_page (and clear_huge_page too) to not temporal stores. I also extensively researched ways to avoid this cache trashing with a full prefault logic that would cow in 8k/16k/32k/64k up to 1M (I can send those patches that fully implemented prefault) but I concluded they're not worth it and they add an huge additional complexity and they remove all tlb benefits until the full hugepage has been faulted in, to save a little bit of memory and some cache during app startup, but they still don't improve substantially the cache-trashing during startup if the prefault happens in >4k chunks. One reason is that those 4k pte entries copied are still mapped on a perfectly cache-colored hugepage, so the trashing is the worst one can generate in those copies (cow of 4k page copies aren't so well colored so they trashes less, but again this results in software running faster after the page fault). Those prefault patches allowed things like a pte where post-cow pages were local 4k regular anon pages and the not-yet-cowed pte entries were pointing in the middle of some hugepage mapped read-only. If it doesn't payoff substantially with todays hardware it will payoff even less in the future with larger l2 caches, and the prefault logic would blot the VM a lot. If one is emebdded transparent_hugepage can be disabled during boot with sysfs or with the boot commandline parameter transparent_hugepage=0 (or transparent_hugepage=2 to restrict hugepages inside madvise regions) that will ensure not a single hugepage is allocated at boot time. It is simple enough to just disable transparent hugepage globally and let transparent hugepages be allocated selectively by applications in the MADV_HUGEPAGE region (both at page fault time, and if enabled with the collapse_huge_page too through the kernel daemon). This patch supports only hugepages mapped in the pmd, archs that have smaller hugepages will not fit in this patch alone. Also some archs like power have certain tlb limits that prevents mixing different page size in the same regions so they will not fit in this framework that requires "graceful fallback" to basic PAGE_SIZE in case of physical memory fragmentation. hugetlbfs remains a perfect fit for those because its software limits happen to match the hardware limits. hugetlbfs also remains a perfect fit for hugepage sizes like 1GByte that cannot be hoped to be found not fragmented after a certain system uptime and that would be very expensive to defragment with relocation, so requiring reservation. hugetlbfs is the "reservation way", the point of transparent hugepages is not to have any reservation at all and maximizing the use of cache and hugepages at all times automatically. Some performance result: vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largep ages3 memset page fault 1566023 memset tlb miss 453854 memset second tlb miss 453321 random access tlb miss 41635 random access second tlb miss 41658 vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largepages3 memset page fault 1566471 memset tlb miss 453375 memset second tlb miss 453320 random access tlb miss 41636 random access second tlb miss 41637 vmx andrea # ./largepages3 memset page fault 1566642 memset tlb miss 453417 memset second tlb miss 453313 random access tlb miss 41630 random access second tlb miss 41647 vmx andrea # ./largepages3 memset page fault 1566872 memset tlb miss 453418 memset second tlb miss 453315 random access tlb miss 41618 random access second tlb miss 41659 vmx andrea # echo 0 > /proc/sys/vm/transparent_hugepage vmx andrea # ./largepages3 memset page fault 2182476 memset tlb miss 460305 memset second tlb miss 460179 random access tlb miss 44483 random access second tlb miss 44186 vmx andrea # ./largepages3 memset page fault 2182791 memset tlb miss 460742 memset second tlb miss 459962 random access tlb miss 43981 random access second tlb miss 43988 ============ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/time.h> #define SIZE (3UL*1024*1024*1024) int main() { char *p = malloc(SIZE), *p2; struct timeval before, after; gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset page fault %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); return 0; } ============ Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 23:46:52 +00:00
}
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (pmd_none(*pmd)) {
addr = next;
continue;
}
addr = zap_pte_range(tlb, vma, pmd, addr, next, details);
if (addr != next)
pmd--;
} while (pmd++, cond_resched(), addr != end);
return addr;
}
static inline unsigned long zap_pud_range(struct mmu_gather *tlb,
struct vm_area_struct *vma, p4d_t *p4d,
unsigned long addr, unsigned long end,
struct zap_details *details)
{
pud_t *pud;
unsigned long next;
pud = pud_offset(p4d, addr);
do {
next = pud_addr_end(addr, end);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
if (pud_trans_huge(*pud) || pud_devmap(*pud)) {
if (next - addr != HPAGE_PUD_SIZE) {
mmap_assert_locked(tlb->mm);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
split_huge_pud(vma, pud, addr);
} else if (zap_huge_pud(tlb, vma, pud, addr))
goto next;
/* fall through */
}
if (pud_none_or_clear_bad(pud))
continue;
next = zap_pmd_range(tlb, vma, pud, addr, next, details);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
next:
cond_resched();
} while (pud++, addr = next, addr != end);
return addr;
}
static inline unsigned long zap_p4d_range(struct mmu_gather *tlb,
struct vm_area_struct *vma, pgd_t *pgd,
unsigned long addr, unsigned long end,
struct zap_details *details)
{
p4d_t *p4d;
unsigned long next;
p4d = p4d_offset(pgd, addr);
do {
next = p4d_addr_end(addr, end);
if (p4d_none_or_clear_bad(p4d))
continue;
next = zap_pud_range(tlb, vma, p4d, addr, next, details);
} while (p4d++, addr = next, addr != end);
return addr;
}
mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:20:24 +00:00
void unmap_page_range(struct mmu_gather *tlb,
struct vm_area_struct *vma,
unsigned long addr, unsigned long end,
struct zap_details *details)
{
pgd_t *pgd;
unsigned long next;
BUG_ON(addr >= end);
tlb_start_vma(tlb, vma);
pgd = pgd_offset(vma->vm_mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
next = zap_p4d_range(tlb, vma, pgd, addr, next, details);
} while (pgd++, addr = next, addr != end);
tlb_end_vma(tlb, vma);
}
static void unmap_single_vma(struct mmu_gather *tlb,
struct vm_area_struct *vma, unsigned long start_addr,
unsigned long end_addr,
mm: introduce __vm_flags_mod and use it in untrack_pfn There are scenarios when vm_flags can be modified without exclusive mmap_lock, such as: - after VMA was isolated and mmap_lock was downgraded or dropped - in exit_mmap when there are no other mm users and locking is unnecessary Introduce __vm_flags_mod to avoid assertions when the caller takes responsibility for the required locking. Pass a hint to untrack_pfn to conditionally use __vm_flags_mod for flags modification to avoid assertion. Link: https://lkml.kernel.org/r/20230126193752.297968-7-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 19:37:51 +00:00
struct zap_details *details, bool mm_wr_locked)
{
unsigned long start = max(vma->vm_start, start_addr);
unsigned long end;
if (start >= vma->vm_end)
return;
end = min(vma->vm_end, end_addr);
if (end <= vma->vm_start)
return;
uprobes/core: Decrement uprobe count before the pages are unmapped Uprobes has a callback (uprobe_munmap()) in the unmap path to maintain the uprobes count. In the exit path this callback gets called in unlink_file_vma(). However by the time unlink_file_vma() is called, the pages would have been unmapped (in unmap_vmas()) and the task->rss_stat counts accounted (in zap_pte_range()). If the exiting process has probepoints, uprobe_munmap() checks if the breakpoint instruction was around before decrementing the probe count. This results in a file backed page being reread by uprobe_munmap() and hence it does not find the breakpoint. This patch fixes this problem by moving the callback to unmap_single_vma(). Since unmap_single_vma() may not unmap the complete vma, add start and end parameters to uprobe_munmap(). This bug became apparent courtesy of commit c3f0327f8e9d ("mm: add rss counters consistency check"). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120411103527.23245.9835.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-11 10:35:27 +00:00
if (vma->vm_file)
uprobe_munmap(vma, start, end);
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:34 +00:00
if (unlikely(vma->vm_flags & VM_PFNMAP))
mm: introduce __vm_flags_mod and use it in untrack_pfn There are scenarios when vm_flags can be modified without exclusive mmap_lock, such as: - after VMA was isolated and mmap_lock was downgraded or dropped - in exit_mmap when there are no other mm users and locking is unnecessary Introduce __vm_flags_mod to avoid assertions when the caller takes responsibility for the required locking. Pass a hint to untrack_pfn to conditionally use __vm_flags_mod for flags modification to avoid assertion. Link: https://lkml.kernel.org/r/20230126193752.297968-7-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 19:37:51 +00:00
untrack_pfn(vma, 0, 0, mm_wr_locked);
if (start != end) {
if (unlikely(is_vm_hugetlb_page(vma))) {
/*
* It is undesirable to test vma->vm_file as it
* should be non-null for valid hugetlb area.
* However, vm_file will be NULL in the error
* cleanup path of mmap_region. When
* hugetlbfs ->mmap method fails,
* mmap_region() nullifies vma->vm_file
* before calling this function to clean up.
* Since no pte has actually been setup, it is
* safe to do nothing in this case.
*/
if (vma->vm_file) {
mm/hugetlb: only drop uffd-wp special pte if required As with shmem uffd-wp special ptes, only drop the uffd-wp special swap pte if unmapping an entire vma or synchronized such that faults can not race with the unmap operation. This requires passing zap_flags all the way to the lowest level hugetlb unmap routine: __unmap_hugepage_range. In general, unmap calls originated in hugetlbfs code will pass the ZAP_FLAG_DROP_MARKER flag as synchronization is in place to prevent faults. The exception is hole punch which will first unmap without any synchronization. Later when hole punch actually removes the page from the file, it will check to see if there was a subsequent fault and if so take the hugetlb fault mutex while unmapping again. This second unmap will pass in ZAP_FLAG_DROP_MARKER. The justification of "whether to apply ZAP_FLAG_DROP_MARKER flag when unmap a hugetlb range" is (IMHO): we should never reach a state when a page fault could errornously fault in a page-cache page that was wr-protected to be writable, even in an extremely short period. That could happen if e.g. we pass ZAP_FLAG_DROP_MARKER when hugetlbfs_punch_hole() calls hugetlb_vmdelete_list(), because if a page faults after that call and before remove_inode_hugepages() is executed, the page cache can be mapped writable again in the small racy window, that can cause unexpected data overwritten. [peterx@redhat.com: fix sparse warning] Link: https://lkml.kernel.org/r/Ylcdw8I1L5iAoWhb@xz-m1.local [akpm@linux-foundation.org: move zap_flags_t from mm.h to mm_types.h to fix build issues] Link: https://lkml.kernel.org/r/20220405014915.14873-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:55 +00:00
zap_flags_t zap_flags = details ?
details->zap_flags : 0;
hugetlbfs: close race between MADV_DONTNEED and page fault Malloc libraries, like jemalloc and tcalloc, take decisions on when to call madvise independently from the code in the main application. This sometimes results in the application page faulting on an address, right after the malloc library has shot down the backing memory with MADV_DONTNEED. Usually this is harmless, because we always have some 4kB pages sitting around to satisfy a page fault. However, with hugetlbfs systems often allocate only the exact number of huge pages that the application wants. Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of any lock taken on the page fault path, which can open up the following race condition: CPU 1 CPU 2 MADV_DONTNEED unmap page shoot down TLB entry page fault fail to allocate a huge page killed with SIGBUS free page Fix that race by pulling the locking from __unmap_hugepage_final_range into helper functions called from zap_page_range_single. This ensures page faults stay locked out of the MADV_DONTNEED VMA until the huge pages have actually been freed. Link: https://lkml.kernel.org/r/20231006040020.3677377-4-riel@surriel.com Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 03:59:08 +00:00
__unmap_hugepage_range(tlb, vma, start, end,
mm/hugetlb: only drop uffd-wp special pte if required As with shmem uffd-wp special ptes, only drop the uffd-wp special swap pte if unmapping an entire vma or synchronized such that faults can not race with the unmap operation. This requires passing zap_flags all the way to the lowest level hugetlb unmap routine: __unmap_hugepage_range. In general, unmap calls originated in hugetlbfs code will pass the ZAP_FLAG_DROP_MARKER flag as synchronization is in place to prevent faults. The exception is hole punch which will first unmap without any synchronization. Later when hole punch actually removes the page from the file, it will check to see if there was a subsequent fault and if so take the hugetlb fault mutex while unmapping again. This second unmap will pass in ZAP_FLAG_DROP_MARKER. The justification of "whether to apply ZAP_FLAG_DROP_MARKER flag when unmap a hugetlb range" is (IMHO): we should never reach a state when a page fault could errornously fault in a page-cache page that was wr-protected to be writable, even in an extremely short period. That could happen if e.g. we pass ZAP_FLAG_DROP_MARKER when hugetlbfs_punch_hole() calls hugetlb_vmdelete_list(), because if a page faults after that call and before remove_inode_hugepages() is executed, the page cache can be mapped writable again in the small racy window, that can cause unexpected data overwritten. [peterx@redhat.com: fix sparse warning] Link: https://lkml.kernel.org/r/Ylcdw8I1L5iAoWhb@xz-m1.local [akpm@linux-foundation.org: move zap_flags_t from mm.h to mm_types.h to fix build issues] Link: https://lkml.kernel.org/r/20220405014915.14873-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:55 +00:00
NULL, zap_flags);
}
} else
unmap_page_range(tlb, vma, start, end, details);
}
}
/**
* unmap_vmas - unmap a range of memory covered by a list of vma's
* @tlb: address of the caller's struct mmu_gather
* @mas: the maple state
* @vma: the starting vma
* @start_addr: virtual address at which to start unmapping
* @end_addr: virtual address at which to end unmapping
* @tree_end: The maximum index to check
* @mm_wr_locked: lock flag
*
* Unmap all pages in the vma list.
*
* Only addresses between `start' and `end' will be unmapped.
*
* The VMA list must be sorted in ascending virtual address order.
*
* unmap_vmas() assumes that the caller will flush the whole unmapped address
* range after unmap_vmas() returns. So the only responsibility here is to
* ensure that any thus-far unmapped pages are flushed before unmap_vmas()
* drops the lock and schedules.
*/
void unmap_vmas(struct mmu_gather *tlb, struct ma_state *mas,
struct vm_area_struct *vma, unsigned long start_addr,
unsigned long end_addr, unsigned long tree_end,
bool mm_wr_locked)
{
struct mmu_notifier_range range;
struct zap_details details = {
hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing madvise(MADV_DONTNEED) ends up calling zap_page_range() to clear page tables associated with the address range. For hugetlb vmas, zap_page_range will call __unmap_hugepage_range_final. However, __unmap_hugepage_range_final assumes the passed vma is about to be removed and deletes the vma_lock to prevent pmd sharing as the vma is on the way out. In the case of madvise(MADV_DONTNEED) the vma remains, but the missing vma_lock prevents pmd sharing and could potentially lead to issues with truncation/fault races. This issue was originally reported here [1] as a BUG triggered in page_try_dup_anon_rmap. Prior to the introduction of the hugetlb vma_lock, __unmap_hugepage_range_final cleared the VM_MAYSHARE flag to prevent pmd sharing. Subsequent faults on this vma were confused as VM_MAYSHARE indicates a sharable vma, but was not set so page_mapping was not set in new pages added to the page table. This resulted in pages that appeared anonymous in a VM_SHARED vma and triggered the BUG. Address issue by adding a new zap flag ZAP_FLAG_UNMAP to indicate an unmap call from unmap_vmas(). This is used to indicate the 'final' unmapping of a hugetlb vma. When called via MADV_DONTNEED, this flag is not set and the vm_lock is not deleted. [1] https://lore.kernel.org/lkml/CAO4mrfdLMXsao9RF4fUE8-Wfde8xmjsKrTNMNC9wjUb6JudD0g@mail.gmail.com/ Link: https://lkml.kernel.org/r/20221114235507.294320-3-mike.kravetz@oracle.com Fixes: 90e7e7f5ef3f ("mm: enable MADV_DONTNEED for hugetlb mappings") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Wei Chen <harperchen1110@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-14 23:55:06 +00:00
.zap_flags = ZAP_FLAG_DROP_MARKER | ZAP_FLAG_UNMAP,
/* Careful - we need to zap private pages too! */
.even_cows = true,
};
mmu_notifier_range_init(&range, MMU_NOTIFY_UNMAP, 0, vma->vm_mm,
mm/mmu_notifier: contextual information for event triggering invalidation CPU page table update can happens for many reasons, not only as a result of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as a result of kernel activities (memory compression, reclaim, migration, ...). Users of mmu notifier API track changes to the CPU page table and take specific action for them. While current API only provide range of virtual address affected by the change, not why the changes is happening. This patchset do the initial mechanical convertion of all the places that calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP event as well as the vma if it is know (most invalidation happens against a given vma). Passing down the vma allows the users of mmu notifier to inspect the new vma page protection. The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier should assume that every for the range is going away when that event happens. A latter patch do convert mm call path to use a more appropriate events for each call. This is done as 2 patches so that no call site is forgotten especialy as it uses this following coccinelle patch: %<---------------------------------------------------------------------- @@ identifier I1, I2, I3, I4; @@ static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1, +enum mmu_notifier_event event, +unsigned flags, +struct vm_area_struct *vma, struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... } @@ @@ -#define mmu_notifier_range_init(range, mm, start, end) +#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end) @@ expression E1, E3, E4; identifier I1; @@ <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, I1, I1->vm_mm, E3, E4) ...> @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(..., struct vm_area_struct *VMA, ...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(...) { struct vm_area_struct *VMA; <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN; @@ FN(...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, NULL, E2, E3, E4) ...> } ---------------------------------------------------------------------->% Applied with: spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place spatch --sp-file mmu-notifier.spatch --dir mm --in-place Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:20:49 +00:00
start_addr, end_addr);
mmu_notifier_invalidate_range_start(&range);
mm: remove the vma linked list Replace any vm_next use with vma_find(). Update free_pgtables(), unmap_vmas(), and zap_page_range() to use the maple tree. Use the new free_pgtables() and unmap_vmas() in do_mas_align_munmap(). At the same time, alter the loop to be more compact. Now that free_pgtables() and unmap_vmas() take a maple tree as an argument, rearrange do_mas_align_munmap() to use the new tree to hold the vmas to remove. Remove __vma_link_list() and __vma_unlink_list() as they are exclusively used to update the linked list. Drop linked list update from __insert_vm_struct(). Rework validation of tree as it was depending on the linked list. [yang.lee@linux.alibaba.com: fix one kernel-doc comment] Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1949 Link: https://lkml.kernel.org/r/20220824021918.94116-1-yang.lee@linux.alibaba.comLink: https://lkml.kernel.org/r/20220906194824.2110408-69-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-06 19:49:06 +00:00
do {
hugetlbfs: close race between MADV_DONTNEED and page fault Malloc libraries, like jemalloc and tcalloc, take decisions on when to call madvise independently from the code in the main application. This sometimes results in the application page faulting on an address, right after the malloc library has shot down the backing memory with MADV_DONTNEED. Usually this is harmless, because we always have some 4kB pages sitting around to satisfy a page fault. However, with hugetlbfs systems often allocate only the exact number of huge pages that the application wants. Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of any lock taken on the page fault path, which can open up the following race condition: CPU 1 CPU 2 MADV_DONTNEED unmap page shoot down TLB entry page fault fail to allocate a huge page killed with SIGBUS free page Fix that race by pulling the locking from __unmap_hugepage_final_range into helper functions called from zap_page_range_single. This ensures page faults stay locked out of the MADV_DONTNEED VMA until the huge pages have actually been freed. Link: https://lkml.kernel.org/r/20231006040020.3677377-4-riel@surriel.com Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 03:59:08 +00:00
unsigned long start = start_addr;
unsigned long end = end_addr;
hugetlb_zap_begin(vma, &start, &end);
unmap_single_vma(tlb, vma, start, end, &details,
mm: introduce __vm_flags_mod and use it in untrack_pfn There are scenarios when vm_flags can be modified without exclusive mmap_lock, such as: - after VMA was isolated and mmap_lock was downgraded or dropped - in exit_mmap when there are no other mm users and locking is unnecessary Introduce __vm_flags_mod to avoid assertions when the caller takes responsibility for the required locking. Pass a hint to untrack_pfn to conditionally use __vm_flags_mod for flags modification to avoid assertion. Link: https://lkml.kernel.org/r/20230126193752.297968-7-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 19:37:51 +00:00
mm_wr_locked);
hugetlbfs: close race between MADV_DONTNEED and page fault Malloc libraries, like jemalloc and tcalloc, take decisions on when to call madvise independently from the code in the main application. This sometimes results in the application page faulting on an address, right after the malloc library has shot down the backing memory with MADV_DONTNEED. Usually this is harmless, because we always have some 4kB pages sitting around to satisfy a page fault. However, with hugetlbfs systems often allocate only the exact number of huge pages that the application wants. Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of any lock taken on the page fault path, which can open up the following race condition: CPU 1 CPU 2 MADV_DONTNEED unmap page shoot down TLB entry page fault fail to allocate a huge page killed with SIGBUS free page Fix that race by pulling the locking from __unmap_hugepage_final_range into helper functions called from zap_page_range_single. This ensures page faults stay locked out of the MADV_DONTNEED VMA until the huge pages have actually been freed. Link: https://lkml.kernel.org/r/20231006040020.3677377-4-riel@surriel.com Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 03:59:08 +00:00
hugetlb_zap_end(vma, &details);
fork: use __mt_dup() to duplicate maple tree in dup_mmap() In dup_mmap(), using __mt_dup() to duplicate the old maple tree and then directly replacing the entries of VMAs in the new maple tree can result in better performance. __mt_dup() uses DFS pre-order to duplicate the maple tree, so it is efficient. The average time complexity of __mt_dup() is O(n), where n is the number of VMAs. The proof of the time complexity is provided in the commit log that introduces __mt_dup(). After duplicating the maple tree, each element is traversed and replaced (ignoring the cases of deletion, which are rare). Since it is only a replacement operation for each element, this process is also O(n). Analyzing the exact time complexity of the previous algorithm is challenging because each insertion can involve appending to a node, pushing data to adjacent nodes, or even splitting nodes. The frequency of each action is difficult to calculate. The worst-case scenario for a single insertion is when the tree undergoes splitting at every level. If we consider each insertion as the worst-case scenario, we can determine that the upper bound of the time complexity is O(n*log(n)), although this is a loose upper bound. However, based on the test data, it appears that the actual time complexity is likely to be O(n). As the entire maple tree is duplicated using __mt_dup(), if dup_mmap() fails, there will be a portion of VMAs that have not been duplicated in the maple tree. To handle this, we mark the failure point with XA_ZERO_ENTRY. In exit_mmap(), if this marker is encountered, stop releasing VMAs that have not been duplicated after this point. There is a "spawn" in byte-unixbench[1], which can be used to test the performance of fork(). I modified it slightly to make it work with different number of VMAs. Below are the test results. The first row shows the number of VMAs. The second and third rows show the number of fork() calls per ten seconds, corresponding to next-20231006 and the this patchset, respectively. The test results were obtained with CPU binding to avoid scheduler load balancing that could cause unstable results. There are still some fluctuations in the test results, but at least they are better than the original performance. 21 121 221 421 821 1621 3221 6421 12821 25621 51221 112100 76261 54227 34035 20195 11112 6017 3161 1606 802 393 114558 83067 65008 45824 28751 16072 8922 4747 2436 1233 599 2.19% 8.92% 19.88% 34.64% 42.37% 44.64% 48.28% 50.17% 51.68% 53.74% 52.42% [1] https://github.com/kdlucas/byte-unixbench/tree/master Link: https://lkml.kernel.org/r/20231027033845.90608-11-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-27 03:38:45 +00:00
vma = mas_find(mas, tree_end - 1);
} while (vma && likely(!xa_is_zero(vma)));
mmu_notifier_invalidate_range_end(&range);
}
/**
* zap_page_range_single - remove user pages in a given range
* @vma: vm_area_struct holding the applicable pages
* @address: starting address of pages to zap
* @size: number of bytes to zap
* @details: details of shared cache invalidation
*
* The range must fit into one VMA.
*/
madvise: use zap_page_range_single for madvise dontneed This series addresses the issue first reported in [1], and fully described in patch 2. Patches 1 and 2 address the user visible issue and are tagged for stable backports. While exploring solutions to this issue, related problems with mmu notification calls were discovered. This is addressed in the patch "hugetlb: remove duplicate mmu notifications:". Since there are no user visible effects, this third is not tagged for stable backports. Previous discussions suggested further cleanup by removing the routine zap_page_range. This is possible because zap_page_range_single is now exported, and all callers of zap_page_range pass ranges entirely within a single vma. This work will be done in a later patch so as not to distract from this bug fix. [1] https://lore.kernel.org/lkml/CAO4mrfdLMXsao9RF4fUE8-Wfde8xmjsKrTNMNC9wjUb6JudD0g@mail.gmail.com/ This patch (of 2): Expose the routine zap_page_range_single to zap a range within a single vma. The madvise routine madvise_dontneed_single_vma can use this routine as it explicitly operates on a single vma. Also, update the mmu notification range in zap_page_range_single to take hugetlb pmd sharing into account. This is required as MADV_DONTNEED supports hugetlb vmas. Link: https://lkml.kernel.org/r/20221114235507.294320-1-mike.kravetz@oracle.com Link: https://lkml.kernel.org/r/20221114235507.294320-2-mike.kravetz@oracle.com Fixes: 90e7e7f5ef3f ("mm: enable MADV_DONTNEED for hugetlb mappings") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Wei Chen <harperchen1110@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-14 23:55:05 +00:00
void zap_page_range_single(struct vm_area_struct *vma, unsigned long address,
unsigned long size, struct zap_details *details)
{
madvise: use zap_page_range_single for madvise dontneed This series addresses the issue first reported in [1], and fully described in patch 2. Patches 1 and 2 address the user visible issue and are tagged for stable backports. While exploring solutions to this issue, related problems with mmu notification calls were discovered. This is addressed in the patch "hugetlb: remove duplicate mmu notifications:". Since there are no user visible effects, this third is not tagged for stable backports. Previous discussions suggested further cleanup by removing the routine zap_page_range. This is possible because zap_page_range_single is now exported, and all callers of zap_page_range pass ranges entirely within a single vma. This work will be done in a later patch so as not to distract from this bug fix. [1] https://lore.kernel.org/lkml/CAO4mrfdLMXsao9RF4fUE8-Wfde8xmjsKrTNMNC9wjUb6JudD0g@mail.gmail.com/ This patch (of 2): Expose the routine zap_page_range_single to zap a range within a single vma. The madvise routine madvise_dontneed_single_vma can use this routine as it explicitly operates on a single vma. Also, update the mmu notification range in zap_page_range_single to take hugetlb pmd sharing into account. This is required as MADV_DONTNEED supports hugetlb vmas. Link: https://lkml.kernel.org/r/20221114235507.294320-1-mike.kravetz@oracle.com Link: https://lkml.kernel.org/r/20221114235507.294320-2-mike.kravetz@oracle.com Fixes: 90e7e7f5ef3f ("mm: enable MADV_DONTNEED for hugetlb mappings") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Wei Chen <harperchen1110@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-14 23:55:05 +00:00
const unsigned long end = address + size;
struct mmu_notifier_range range;
mm: mmu_gather rework Rework the existing mmu_gather infrastructure. The direct purpose of these patches was to allow preemptible mmu_gather, but even without that I think these patches provide an improvement to the status quo. The first 9 patches rework the mmu_gather infrastructure. For review purpose I've split them into generic and per-arch patches with the last of those a generic cleanup. The next patch provides generic RCU page-table freeing, and the followup is a patch converting s390 to use this. I've also got 4 patches from DaveM lined up (not included in this series) that uses this to implement gup_fast() for sparc64. Then there is one patch that extends the generic mmu_gather batching. After that follow the mm preemptibility patches, these make part of the mm a lot more preemptible. It converts i_mmap_lock and anon_vma->lock to mutexes which together with the mmu_gather rework makes mmu_gather preemptible as well. Making i_mmap_lock a mutex also enables a clean-up of the truncate code. This also allows for preemptible mmu_notifiers, something that XPMEM I think wants. Furthermore, it removes the new and universially detested unmap_mutex. This patch: Remove the first obstacle towards a fully preemptible mmu_gather. The current scheme assumes mmu_gather is always done with preemption disabled and uses per-cpu storage for the page batches. Change this to try and allocate a page for batching and in case of failure, use a small on-stack array to make some progress. Preemptible mmu_gather is desired in general and usable once i_mmap_lock becomes a mutex. Doing it before the mutex conversion saves us from having to rework the code by moving the mmu_gather bits inside the pte_lock. Also avoid flushing the tlb batches from under the pte lock, this is useful even without the i_mmap_lock conversion as it significantly reduces pte lock hold times. [akpm@linux-foundation.org: fix comment tpyo] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 00:11:45 +00:00
struct mmu_gather tlb;
lru_add_drain();
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, vma->vm_mm,
madvise: use zap_page_range_single for madvise dontneed This series addresses the issue first reported in [1], and fully described in patch 2. Patches 1 and 2 address the user visible issue and are tagged for stable backports. While exploring solutions to this issue, related problems with mmu notification calls were discovered. This is addressed in the patch "hugetlb: remove duplicate mmu notifications:". Since there are no user visible effects, this third is not tagged for stable backports. Previous discussions suggested further cleanup by removing the routine zap_page_range. This is possible because zap_page_range_single is now exported, and all callers of zap_page_range pass ranges entirely within a single vma. This work will be done in a later patch so as not to distract from this bug fix. [1] https://lore.kernel.org/lkml/CAO4mrfdLMXsao9RF4fUE8-Wfde8xmjsKrTNMNC9wjUb6JudD0g@mail.gmail.com/ This patch (of 2): Expose the routine zap_page_range_single to zap a range within a single vma. The madvise routine madvise_dontneed_single_vma can use this routine as it explicitly operates on a single vma. Also, update the mmu notification range in zap_page_range_single to take hugetlb pmd sharing into account. This is required as MADV_DONTNEED supports hugetlb vmas. Link: https://lkml.kernel.org/r/20221114235507.294320-1-mike.kravetz@oracle.com Link: https://lkml.kernel.org/r/20221114235507.294320-2-mike.kravetz@oracle.com Fixes: 90e7e7f5ef3f ("mm: enable MADV_DONTNEED for hugetlb mappings") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Wei Chen <harperchen1110@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-14 23:55:05 +00:00
address, end);
hugetlbfs: close race between MADV_DONTNEED and page fault Malloc libraries, like jemalloc and tcalloc, take decisions on when to call madvise independently from the code in the main application. This sometimes results in the application page faulting on an address, right after the malloc library has shot down the backing memory with MADV_DONTNEED. Usually this is harmless, because we always have some 4kB pages sitting around to satisfy a page fault. However, with hugetlbfs systems often allocate only the exact number of huge pages that the application wants. Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of any lock taken on the page fault path, which can open up the following race condition: CPU 1 CPU 2 MADV_DONTNEED unmap page shoot down TLB entry page fault fail to allocate a huge page killed with SIGBUS free page Fix that race by pulling the locking from __unmap_hugepage_final_range into helper functions called from zap_page_range_single. This ensures page faults stay locked out of the MADV_DONTNEED VMA until the huge pages have actually been freed. Link: https://lkml.kernel.org/r/20231006040020.3677377-4-riel@surriel.com Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 03:59:08 +00:00
hugetlb_zap_begin(vma, &range.start, &range.end);
tlb_gather_mmu(&tlb, vma->vm_mm);
update_hiwater_rss(vma->vm_mm);
mmu_notifier_invalidate_range_start(&range);
madvise: use zap_page_range_single for madvise dontneed This series addresses the issue first reported in [1], and fully described in patch 2. Patches 1 and 2 address the user visible issue and are tagged for stable backports. While exploring solutions to this issue, related problems with mmu notification calls were discovered. This is addressed in the patch "hugetlb: remove duplicate mmu notifications:". Since there are no user visible effects, this third is not tagged for stable backports. Previous discussions suggested further cleanup by removing the routine zap_page_range. This is possible because zap_page_range_single is now exported, and all callers of zap_page_range pass ranges entirely within a single vma. This work will be done in a later patch so as not to distract from this bug fix. [1] https://lore.kernel.org/lkml/CAO4mrfdLMXsao9RF4fUE8-Wfde8xmjsKrTNMNC9wjUb6JudD0g@mail.gmail.com/ This patch (of 2): Expose the routine zap_page_range_single to zap a range within a single vma. The madvise routine madvise_dontneed_single_vma can use this routine as it explicitly operates on a single vma. Also, update the mmu notification range in zap_page_range_single to take hugetlb pmd sharing into account. This is required as MADV_DONTNEED supports hugetlb vmas. Link: https://lkml.kernel.org/r/20221114235507.294320-1-mike.kravetz@oracle.com Link: https://lkml.kernel.org/r/20221114235507.294320-2-mike.kravetz@oracle.com Fixes: 90e7e7f5ef3f ("mm: enable MADV_DONTNEED for hugetlb mappings") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Wei Chen <harperchen1110@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-14 23:55:05 +00:00
/*
* unmap 'address-end' not 'range.start-range.end' as range
* could have been expanded for hugetlb pmd sharing.
*/
mm: introduce __vm_flags_mod and use it in untrack_pfn There are scenarios when vm_flags can be modified without exclusive mmap_lock, such as: - after VMA was isolated and mmap_lock was downgraded or dropped - in exit_mmap when there are no other mm users and locking is unnecessary Introduce __vm_flags_mod to avoid assertions when the caller takes responsibility for the required locking. Pass a hint to untrack_pfn to conditionally use __vm_flags_mod for flags modification to avoid assertion. Link: https://lkml.kernel.org/r/20230126193752.297968-7-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 19:37:51 +00:00
unmap_single_vma(&tlb, vma, address, end, details, false);
mmu_notifier_invalidate_range_end(&range);
tlb_finish_mmu(&tlb);
hugetlbfs: close race between MADV_DONTNEED and page fault Malloc libraries, like jemalloc and tcalloc, take decisions on when to call madvise independently from the code in the main application. This sometimes results in the application page faulting on an address, right after the malloc library has shot down the backing memory with MADV_DONTNEED. Usually this is harmless, because we always have some 4kB pages sitting around to satisfy a page fault. However, with hugetlbfs systems often allocate only the exact number of huge pages that the application wants. Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of any lock taken on the page fault path, which can open up the following race condition: CPU 1 CPU 2 MADV_DONTNEED unmap page shoot down TLB entry page fault fail to allocate a huge page killed with SIGBUS free page Fix that race by pulling the locking from __unmap_hugepage_final_range into helper functions called from zap_page_range_single. This ensures page faults stay locked out of the MADV_DONTNEED VMA until the huge pages have actually been freed. Link: https://lkml.kernel.org/r/20231006040020.3677377-4-riel@surriel.com Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 03:59:08 +00:00
hugetlb_zap_end(vma, details);
}
/**
* zap_vma_ptes - remove ptes mapping the vma
* @vma: vm_area_struct holding ptes to be zapped
* @address: starting address of pages to zap
* @size: number of bytes to zap
*
* This function only unmaps ptes assigned to VM_PFNMAP vmas.
*
* The entire address range must be fully contained within the vma.
*
*/
void zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
unsigned long size)
{
if (!range_in_vma(vma, address, address + size) ||
!(vma->vm_flags & VM_PFNMAP))
return;
zap_page_range_single(vma, address, size, NULL);
}
EXPORT_SYMBOL_GPL(zap_vma_ptes);
static pmd_t *walk_to_pmd(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd;
pgd = pgd_offset(mm, addr);
p4d = p4d_alloc(mm, pgd, addr);
if (!p4d)
return NULL;
pud = pud_alloc(mm, p4d, addr);
if (!pud)
return NULL;
pmd = pmd_alloc(mm, pud, addr);
if (!pmd)
return NULL;
VM_BUG_ON(pmd_trans_huge(*pmd));
return pmd;
}
pte_t *__get_locked_pte(struct mm_struct *mm, unsigned long addr,
spinlock_t **ptl)
{
pmd_t *pmd = walk_to_pmd(mm, addr);
if (!pmd)
return NULL;
return pte_alloc_map_lock(mm, pmd, addr, ptl);
}
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
static bool vm_mixed_zeropage_allowed(struct vm_area_struct *vma)
{
VM_WARN_ON_ONCE(vma->vm_flags & VM_PFNMAP);
/*
* Whoever wants to forbid the zeropage after some zeropages
* might already have been mapped has to scan the page tables and
* bail out on any zeropages. Zeropages in COW mappings can
* be unshared using FAULT_FLAG_UNSHARE faults.
*/
if (mm_forbids_zeropage(vma->vm_mm))
return false;
/* zeropages in COW mappings are common and unproblematic. */
if (is_cow_mapping(vma->vm_flags))
return true;
/* Mappings that do not allow for writable PTEs are unproblematic. */
if (!(vma->vm_flags & (VM_WRITE | VM_MAYWRITE)))
return true;
/*
* Why not allow any VMA that has vm_ops->pfn_mkwrite? GUP could
* find the shared zeropage and longterm-pin it, which would
* be problematic as soon as the zeropage gets replaced by a different
* page due to vma->vm_ops->pfn_mkwrite, because what's mapped would
* now differ to what GUP looked up. FSDAX is incompatible to
* FOLL_LONGTERM and VM_IO is incompatible to GUP completely (see
* check_vma_flags).
*/
return vma->vm_ops && vma->vm_ops->pfn_mkwrite &&
(vma_is_fsdax(vma) || vma->vm_flags & VM_IO);
}
static int validate_page_before_insert(struct vm_area_struct *vma,
struct page *page)
{
struct folio *folio = page_folio(page);
mm/memory: move page_count() check into validate_page_before_insert() Patch series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()", v2. There is interest in mapping zeropages via vm_insert_pages() [1] into MAP_SHARED mappings. For now, we only get zeropages in MAP_SHARED mappings via vmf_insert_mixed() from FSDAX code, and I think it's a bit shaky in some cases because we refcount the zeropage when mapping it but not necessarily always when unmapping it ... and we should actually never refcount it. It's all a bit tricky, especially how zeropages in MAP_SHARED mappings interact with GUP (FOLL_LONGTERM), mprotect(), write-faults and s390x forbidding the shared zeropage (rewrite [2] s now upstream). This series tries to take the careful approach of only allowing the zeropage where it is likely safe to use (which should cover the existing FSDAX use case and [1]), preventing that it could accidentally get mapped writable during a write fault, mprotect() etc, and preventing issues with FOLL_LONGTERM in the future with other users. Tested with a patch from Vincent that uses the zeropage in context of [1]. [1] https://lkml.kernel.org/r/20240430111354.637356-1-vdonnefort@google.com [2] https://lkml.kernel.org/r/20240411161441.910170-1-david@redhat.com This patch (of 3): We'll now also cover the case where insert_page() is called from __vm_insert_mixed(), which sounds like the right thing to do. Link: https://lkml.kernel.org/r/20240522125713.775114-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:11 +00:00
if (!folio_ref_count(folio))
return -EINVAL;
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
if (unlikely(is_zero_folio(folio))) {
if (!vm_mixed_zeropage_allowed(vma))
return -EINVAL;
return 0;
}
if (folio_test_anon(folio) || folio_test_slab(folio) ||
page_has_type(page))
return -EINVAL;
flush_dcache_folio(folio);
return 0;
}
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
static int insert_page_into_pte_locked(struct vm_area_struct *vma, pte_t *pte,
unsigned long addr, struct page *page, pgprot_t prot)
{
struct folio *folio = page_folio(page);
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
pte_t pteval;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (!pte_none(ptep_get(pte)))
return -EBUSY;
/* Ok, finally just insert the thing.. */
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
pteval = mk_pte(page, prot);
if (unlikely(is_zero_folio(folio))) {
pteval = pte_mkspecial(pteval);
} else {
folio_get(folio);
inc_mm_counter(vma->vm_mm, mm_counter_file(folio));
folio_add_file_rmap_pte(folio, page, vma);
}
set_pte_at(vma->vm_mm, addr, pte, pteval);
return 0;
}
static int insert_page(struct vm_area_struct *vma, unsigned long addr,
struct page *page, pgprot_t prot)
{
int retval;
pte_t *pte;
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
spinlock_t *ptl;
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
retval = validate_page_before_insert(vma, page);
if (retval)
goto out;
retval = -ENOMEM;
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
pte = get_locked_pte(vma->vm_mm, addr, &ptl);
if (!pte)
goto out;
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
retval = insert_page_into_pte_locked(vma, pte, addr, page, prot);
pte_unmap_unlock(pte, ptl);
out:
return retval;
}
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
static int insert_page_in_batch_locked(struct vm_area_struct *vma, pte_t *pte,
unsigned long addr, struct page *page, pgprot_t prot)
{
int err;
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
err = validate_page_before_insert(vma, page);
if (err)
return err;
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
return insert_page_into_pte_locked(vma, pte, addr, page, prot);
}
/* insert_pages() amortizes the cost of spinlock operations
* when inserting pages in a loop.
*/
static int insert_pages(struct vm_area_struct *vma, unsigned long addr,
struct page **pages, unsigned long *num, pgprot_t prot)
{
pmd_t *pmd = NULL;
pte_t *start_pte, *pte;
spinlock_t *pte_lock;
struct mm_struct *const mm = vma->vm_mm;
unsigned long curr_page_idx = 0;
unsigned long remaining_pages_total = *num;
unsigned long pages_to_write_in_pmd;
int ret;
more:
ret = -EFAULT;
pmd = walk_to_pmd(mm, addr);
if (!pmd)
goto out;
pages_to_write_in_pmd = min_t(unsigned long,
remaining_pages_total, PTRS_PER_PTE - pte_index(addr));
/* Allocate the PTE if necessary; takes PMD lock once only. */
ret = -ENOMEM;
if (pte_alloc(mm, pmd))
goto out;
while (pages_to_write_in_pmd) {
int pte_idx = 0;
const int batch_size = min_t(int, pages_to_write_in_pmd, 8);
start_pte = pte_offset_map_lock(mm, pmd, addr, &pte_lock);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (!start_pte) {
ret = -EFAULT;
goto out;
}
for (pte = start_pte; pte_idx < batch_size; ++pte, ++pte_idx) {
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
int err = insert_page_in_batch_locked(vma, pte,
addr, pages[curr_page_idx], prot);
if (unlikely(err)) {
pte_unmap_unlock(start_pte, pte_lock);
ret = err;
remaining_pages_total -= pte_idx;
goto out;
}
addr += PAGE_SIZE;
++curr_page_idx;
}
pte_unmap_unlock(start_pte, pte_lock);
pages_to_write_in_pmd -= batch_size;
remaining_pages_total -= batch_size;
}
if (remaining_pages_total)
goto more;
ret = 0;
out:
*num = remaining_pages_total;
return ret;
}
/**
* vm_insert_pages - insert multiple pages into user vma, batching the pmd lock.
* @vma: user vma to map to
* @addr: target start user address of these pages
* @pages: source kernel pages
* @num: in: number of pages to map. out: number of pages that were *not*
* mapped. (0 means all pages were successfully mapped).
*
* Preferred over vm_insert_page() when inserting multiple pages.
*
* In case of error, we may have mapped a subset of the provided
* pages. It is the caller's responsibility to account for this case.
*
* The same restrictions apply as in vm_insert_page().
*/
int vm_insert_pages(struct vm_area_struct *vma, unsigned long addr,
struct page **pages, unsigned long *num)
{
const unsigned long end_addr = addr + (*num * PAGE_SIZE) - 1;
if (addr < vma->vm_start || end_addr >= vma->vm_end)
return -EFAULT;
if (!(vma->vm_flags & VM_MIXEDMAP)) {
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
BUG_ON(mmap_read_trylock(vma->vm_mm));
BUG_ON(vma->vm_flags & VM_PFNMAP);
mm: replace vma->vm_flags direct modifications with modifier calls Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 19:37:49 +00:00
vm_flags_set(vma, VM_MIXEDMAP);
}
/* Defer page refcount checking till we're about to map that page. */
return insert_pages(vma, addr, pages, num, vma->vm_page_prot);
}
EXPORT_SYMBOL(vm_insert_pages);
/**
* vm_insert_page - insert single page into user vma
* @vma: user vma to map to
* @addr: target user address of this page
* @page: source kernel page
*
* This allows drivers to insert individual pages they've allocated
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
* into a user vma. The zeropage is supported in some VMAs,
* see vm_mixed_zeropage_allowed().
*
* The page has to be a nice clean _individual_ kernel allocation.
* If you allocate a compound page, you need to have marked it as
* such (__GFP_COMP), or manually just split the page up yourself
* (see split_page()).
*
* NOTE! Traditionally this was done with "remap_pfn_range()" which
* took an arbitrary page protection parameter. This doesn't allow
* that. Your vma protection will have to be set up correctly, which
* means that if you want a shared writable mapping, you'd better
* ask for a shared writable mapping!
*
* The page does not need to be reserved.
mm: kill vma flag VM_INSERTPAGE Merge VM_INSERTPAGE into VM_MIXEDMAP. VM_MIXEDMAP VMA can mix pure-pfn ptes, special ptes and normal ptes. Now copy_page_range() always copies VM_MIXEDMAP VMA on fork like VM_PFNMAP. If driver populates whole VMA at mmap() it probably not expects page-faults. This patch removes special check from vma_wants_writenotify() which disables pages write tracking for VMA populated via vm_instert_page(). BDI below mapped file should not use dirty-accounting, moreover do_wp_page() can handle this. vm_insert_page() still marks vma after first usage. Usually it is called from f_op->mmap() handler under mm->mmap_sem write-lock, so it able to change vma->vm_flags. Caller must set VM_MIXEDMAP at mmap time if it wants to call this function from other places, for example from page-fault handler. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:40 +00:00
*
* Usually this function is called from f_op->mmap() handler
* under mm->mmap_lock write-lock, so it can change vma->vm_flags.
mm: kill vma flag VM_INSERTPAGE Merge VM_INSERTPAGE into VM_MIXEDMAP. VM_MIXEDMAP VMA can mix pure-pfn ptes, special ptes and normal ptes. Now copy_page_range() always copies VM_MIXEDMAP VMA on fork like VM_PFNMAP. If driver populates whole VMA at mmap() it probably not expects page-faults. This patch removes special check from vma_wants_writenotify() which disables pages write tracking for VMA populated via vm_instert_page(). BDI below mapped file should not use dirty-accounting, moreover do_wp_page() can handle this. vm_insert_page() still marks vma after first usage. Usually it is called from f_op->mmap() handler under mm->mmap_sem write-lock, so it able to change vma->vm_flags. Caller must set VM_MIXEDMAP at mmap time if it wants to call this function from other places, for example from page-fault handler. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:40 +00:00
* Caller must set VM_MIXEDMAP on vma if it wants to call this
* function from other places, for example from page-fault handler.
*
* Return: %0 on success, negative error code otherwise.
*/
int vm_insert_page(struct vm_area_struct *vma, unsigned long addr,
struct page *page)
{
if (addr < vma->vm_start || addr >= vma->vm_end)
return -EFAULT;
mm: kill vma flag VM_INSERTPAGE Merge VM_INSERTPAGE into VM_MIXEDMAP. VM_MIXEDMAP VMA can mix pure-pfn ptes, special ptes and normal ptes. Now copy_page_range() always copies VM_MIXEDMAP VMA on fork like VM_PFNMAP. If driver populates whole VMA at mmap() it probably not expects page-faults. This patch removes special check from vma_wants_writenotify() which disables pages write tracking for VMA populated via vm_instert_page(). BDI below mapped file should not use dirty-accounting, moreover do_wp_page() can handle this. vm_insert_page() still marks vma after first usage. Usually it is called from f_op->mmap() handler under mm->mmap_sem write-lock, so it able to change vma->vm_flags. Caller must set VM_MIXEDMAP at mmap time if it wants to call this function from other places, for example from page-fault handler. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:40 +00:00
if (!(vma->vm_flags & VM_MIXEDMAP)) {
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
BUG_ON(mmap_read_trylock(vma->vm_mm));
mm: kill vma flag VM_INSERTPAGE Merge VM_INSERTPAGE into VM_MIXEDMAP. VM_MIXEDMAP VMA can mix pure-pfn ptes, special ptes and normal ptes. Now copy_page_range() always copies VM_MIXEDMAP VMA on fork like VM_PFNMAP. If driver populates whole VMA at mmap() it probably not expects page-faults. This patch removes special check from vma_wants_writenotify() which disables pages write tracking for VMA populated via vm_instert_page(). BDI below mapped file should not use dirty-accounting, moreover do_wp_page() can handle this. vm_insert_page() still marks vma after first usage. Usually it is called from f_op->mmap() handler under mm->mmap_sem write-lock, so it able to change vma->vm_flags. Caller must set VM_MIXEDMAP at mmap time if it wants to call this function from other places, for example from page-fault handler. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:40 +00:00
BUG_ON(vma->vm_flags & VM_PFNMAP);
mm: replace vma->vm_flags direct modifications with modifier calls Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 19:37:49 +00:00
vm_flags_set(vma, VM_MIXEDMAP);
mm: kill vma flag VM_INSERTPAGE Merge VM_INSERTPAGE into VM_MIXEDMAP. VM_MIXEDMAP VMA can mix pure-pfn ptes, special ptes and normal ptes. Now copy_page_range() always copies VM_MIXEDMAP VMA on fork like VM_PFNMAP. If driver populates whole VMA at mmap() it probably not expects page-faults. This patch removes special check from vma_wants_writenotify() which disables pages write tracking for VMA populated via vm_instert_page(). BDI below mapped file should not use dirty-accounting, moreover do_wp_page() can handle this. vm_insert_page() still marks vma after first usage. Usually it is called from f_op->mmap() handler under mm->mmap_sem write-lock, so it able to change vma->vm_flags. Caller must set VM_MIXEDMAP at mmap time if it wants to call this function from other places, for example from page-fault handler. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:40 +00:00
}
return insert_page(vma, addr, page, vma->vm_page_prot);
}
EXPORT_SYMBOL(vm_insert_page);
mm: introduce new vm_map_pages() and vm_map_pages_zero() API Patch series "mm: Use vm_map_pages() and vm_map_pages_zero() API", v5. This patch (of 5): Previouly drivers have their own way of mapping range of kernel pages/memory into user vma and this was done by invoking vm_insert_page() within a loop. As this pattern is common across different drivers, it can be generalized by creating new functions and using them across the drivers. vm_map_pages() is the API which can be used to map kernel memory/pages in drivers which have considered vm_pgoff vm_map_pages_zero() is the API which can be used to map a range of kernel memory/pages in drivers which have not considered vm_pgoff. vm_pgoff is passed as default 0 for those drivers. We _could_ then at a later "fix" these drivers which are using vm_map_pages_zero() to behave according to the normal vm_pgoff offsetting simply by removing the _zero suffix on the function name and if that causes regressions, it gives us an easy way to revert. Tested on Rockchip hardware and display is working, including talking to Lima via prime. Link: http://lkml.kernel.org/r/751cb8a0f4c3e67e95c58a3b072937617f338eea.1552921225.git.jrdr.linux@gmail.com Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Suggested-by: Russell King <linux@armlinux.org.uk> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@surriel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Sandy Huang <hjc@rock-chips.com> Cc: David Airlie <airlied@linux.ie> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Pawel Osciak <pawel@osciak.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:21:56 +00:00
/*
* __vm_map_pages - maps range of kernel pages into user vma
* @vma: user vma to map to
* @pages: pointer to array of source kernel pages
* @num: number of pages in page array
* @offset: user's requested vm_pgoff
*
* This allows drivers to map range of kernel pages into a user vma.
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
* The zeropage is supported in some VMAs, see
* vm_mixed_zeropage_allowed().
mm: introduce new vm_map_pages() and vm_map_pages_zero() API Patch series "mm: Use vm_map_pages() and vm_map_pages_zero() API", v5. This patch (of 5): Previouly drivers have their own way of mapping range of kernel pages/memory into user vma and this was done by invoking vm_insert_page() within a loop. As this pattern is common across different drivers, it can be generalized by creating new functions and using them across the drivers. vm_map_pages() is the API which can be used to map kernel memory/pages in drivers which have considered vm_pgoff vm_map_pages_zero() is the API which can be used to map a range of kernel memory/pages in drivers which have not considered vm_pgoff. vm_pgoff is passed as default 0 for those drivers. We _could_ then at a later "fix" these drivers which are using vm_map_pages_zero() to behave according to the normal vm_pgoff offsetting simply by removing the _zero suffix on the function name and if that causes regressions, it gives us an easy way to revert. Tested on Rockchip hardware and display is working, including talking to Lima via prime. Link: http://lkml.kernel.org/r/751cb8a0f4c3e67e95c58a3b072937617f338eea.1552921225.git.jrdr.linux@gmail.com Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Suggested-by: Russell King <linux@armlinux.org.uk> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@surriel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Sandy Huang <hjc@rock-chips.com> Cc: David Airlie <airlied@linux.ie> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Pawel Osciak <pawel@osciak.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:21:56 +00:00
*
* Return: 0 on success and error code otherwise.
*/
static int __vm_map_pages(struct vm_area_struct *vma, struct page **pages,
unsigned long num, unsigned long offset)
{
unsigned long count = vma_pages(vma);
unsigned long uaddr = vma->vm_start;
int ret, i;
/* Fail if the user requested offset is beyond the end of the object */
if (offset >= num)
mm: introduce new vm_map_pages() and vm_map_pages_zero() API Patch series "mm: Use vm_map_pages() and vm_map_pages_zero() API", v5. This patch (of 5): Previouly drivers have their own way of mapping range of kernel pages/memory into user vma and this was done by invoking vm_insert_page() within a loop. As this pattern is common across different drivers, it can be generalized by creating new functions and using them across the drivers. vm_map_pages() is the API which can be used to map kernel memory/pages in drivers which have considered vm_pgoff vm_map_pages_zero() is the API which can be used to map a range of kernel memory/pages in drivers which have not considered vm_pgoff. vm_pgoff is passed as default 0 for those drivers. We _could_ then at a later "fix" these drivers which are using vm_map_pages_zero() to behave according to the normal vm_pgoff offsetting simply by removing the _zero suffix on the function name and if that causes regressions, it gives us an easy way to revert. Tested on Rockchip hardware and display is working, including talking to Lima via prime. Link: http://lkml.kernel.org/r/751cb8a0f4c3e67e95c58a3b072937617f338eea.1552921225.git.jrdr.linux@gmail.com Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Suggested-by: Russell King <linux@armlinux.org.uk> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@surriel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Sandy Huang <hjc@rock-chips.com> Cc: David Airlie <airlied@linux.ie> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Pawel Osciak <pawel@osciak.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:21:56 +00:00
return -ENXIO;
/* Fail if the user requested size exceeds available object size */
if (count > num - offset)
return -ENXIO;
for (i = 0; i < count; i++) {
ret = vm_insert_page(vma, uaddr, pages[offset + i]);
if (ret < 0)
return ret;
uaddr += PAGE_SIZE;
}
return 0;
}
/**
* vm_map_pages - maps range of kernel pages starts with non zero offset
* @vma: user vma to map to
* @pages: pointer to array of source kernel pages
* @num: number of pages in page array
*
* Maps an object consisting of @num pages, catering for the user's
* requested vm_pgoff
*
* If we fail to insert any page into the vma, the function will return
* immediately leaving any previously inserted pages present. Callers
* from the mmap handler may immediately return the error as their caller
* will destroy the vma, removing any successfully inserted pages. Other
* callers should make their own arrangements for calling unmap_region().
*
* Context: Process context. Called by mmap handlers.
* Return: 0 on success and error code otherwise.
*/
int vm_map_pages(struct vm_area_struct *vma, struct page **pages,
unsigned long num)
{
return __vm_map_pages(vma, pages, num, vma->vm_pgoff);
}
EXPORT_SYMBOL(vm_map_pages);
/**
* vm_map_pages_zero - map range of kernel pages starts with zero offset
* @vma: user vma to map to
* @pages: pointer to array of source kernel pages
* @num: number of pages in page array
*
* Similar to vm_map_pages(), except that it explicitly sets the offset
* to 0. This function is intended for the drivers that did not consider
* vm_pgoff.
*
* Context: Process context. Called by mmap handlers.
* Return: 0 on success and error code otherwise.
*/
int vm_map_pages_zero(struct vm_area_struct *vma, struct page **pages,
unsigned long num)
{
return __vm_map_pages(vma, pages, num, 0);
}
EXPORT_SYMBOL(vm_map_pages_zero);
static vm_fault_t insert_pfn(struct vm_area_struct *vma, unsigned long addr,
mm: add vm_insert_mixed_mkwrite() When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. This series solves these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. This reduces memory usage and decreases latencies for some workloads, and it simplifies the DAX code, removing over 100 lines in total. This patch (of 5): To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path. Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:18:35 +00:00
pfn_t pfn, pgprot_t prot, bool mkwrite)
{
struct mm_struct *mm = vma->vm_mm;
pte_t *pte, entry;
spinlock_t *ptl;
pte = get_locked_pte(mm, addr, &ptl);
if (!pte)
return VM_FAULT_OOM;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
entry = ptep_get(pte);
if (!pte_none(entry)) {
mm: add vm_insert_mixed_mkwrite() When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. This series solves these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. This reduces memory usage and decreases latencies for some workloads, and it simplifies the DAX code, removing over 100 lines in total. This patch (of 5): To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path. Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:18:35 +00:00
if (mkwrite) {
/*
* For read faults on private mappings the PFN passed
* in may not match the PFN we have mapped if the
* mapped PFN is a writeable COW page. In the mkwrite
* case we are creating a writable PTE for a shared
* mapping and we expect the PFNs to match. If they
* don't match, we are likely racing with block
* allocation and mapping invalidation so just skip the
* update.
mm: add vm_insert_mixed_mkwrite() When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. This series solves these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. This reduces memory usage and decreases latencies for some workloads, and it simplifies the DAX code, removing over 100 lines in total. This patch (of 5): To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path. Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:18:35 +00:00
*/
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_pfn(entry) != pfn_t_to_pfn(pfn)) {
WARN_ON_ONCE(!is_zero_pfn(pte_pfn(entry)));
mm: add vm_insert_mixed_mkwrite() When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. This series solves these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. This reduces memory usage and decreases latencies for some workloads, and it simplifies the DAX code, removing over 100 lines in total. This patch (of 5): To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path. Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:18:35 +00:00
goto out_unlock;
}
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
entry = pte_mkyoung(entry);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
if (ptep_set_access_flags(vma, addr, pte, entry, 1))
update_mmu_cache(vma, addr, pte);
}
goto out_unlock;
mm: add vm_insert_mixed_mkwrite() When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. This series solves these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. This reduces memory usage and decreases latencies for some workloads, and it simplifies the DAX code, removing over 100 lines in total. This patch (of 5): To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path. Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:18:35 +00:00
}
/* Ok, finally just insert the thing.. */
if (pfn_t_devmap(pfn))
entry = pte_mkdevmap(pfn_t_pte(pfn, prot));
else
entry = pte_mkspecial(pfn_t_pte(pfn, prot));
mm: add vm_insert_mixed_mkwrite() When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. This series solves these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. This reduces memory usage and decreases latencies for some workloads, and it simplifies the DAX code, removing over 100 lines in total. This patch (of 5): To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path. Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:18:35 +00:00
if (mkwrite) {
entry = pte_mkyoung(entry);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
}
set_pte_at(mm, addr, pte, entry);
update_mmu_cache(vma, addr, pte); /* XXX: why not for insert_page? */
out_unlock:
pte_unmap_unlock(pte, ptl);
return VM_FAULT_NOPAGE;
}
/**
* vmf_insert_pfn_prot - insert single pfn into user vma with specified pgprot
* @vma: user vma to map to
* @addr: target user address of this page
* @pfn: source kernel pfn
* @pgprot: pgprot flags for the inserted page
*
* This is exactly like vmf_insert_pfn(), except that it allows drivers
* to override pgprot on a per-page basis.
*
* This only makes sense for IO mappings, and it makes no sense for
* COW mappings. In general, using multiple vmas is preferable;
* vmf_insert_pfn_prot should only be used if using multiple VMAs is
* impractical.
*
mm: remove unused vmf_insert_mixed_prot() Patch series "Remove drm/ttm-specific mm changes". Functionality was added specifically for the DRM TTM driver to support mapping memory for VM_MIXEDMAP VMAs with customised protection flags, however this has now been rolled back as issues were found with this approach. This series removes the mm changes too, retaining some of the useful comments. This patch (of 3): The sole user of vmf_insert_mixed_prot(), the drm ttm module, stopped using this in commit f91142c62161 ("drm/ttm: nuke VM_MIXEDMAP on BO mappings v3") citing use of VM_MIXEDMAP in this case being terribly broken. Remove this now-dead code and references to it, but retain the useful description of the prot != vma->vm_page_prot case, moving it to vmf_insert_pfn_prot() instead. Link: https://lkml.kernel.org/r/cover.1678661628.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/a069644388e6f1593a7020d15840e6fc9f39bcaf.1678661628.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Aaron Tomlin <atomlin@atomlin.com> Cc: Christoph Lameter <cl@linux.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: "Russell King (Oracle)" <linux@armlinux.org.uk> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-12 23:40:13 +00:00
* pgprot typically only differs from @vma->vm_page_prot when drivers set
* caching- and encryption bits different than those of @vma->vm_page_prot,
* because the caching- or encryption mode may not be known at mmap() time.
*
* This is ok as long as @vma->vm_page_prot is not used by the core vm
* to set caching and encryption bits for those vmas (except for COW pages).
* This is ensured by core vm only modifying these page table entries using
* functions that don't touch caching- or encryption bits, using pte_modify()
* if needed. (See for example mprotect()).
*
* Also when new page-table entries are created, this is only done using the
* fault() callback, and never using the value of vma->vm_page_prot,
* except for page-table entries that point to anonymous pages as the result
* of COW.
*
* Context: Process context. May allocate using %GFP_KERNEL.
* Return: vm_fault_t value.
*/
vm_fault_t vmf_insert_pfn_prot(struct vm_area_struct *vma, unsigned long addr,
unsigned long pfn, pgprot_t pgprot)
{
/*
* Technically, architectures with pte_special can avoid all these
* restrictions (same for remap_pfn_range). However we would like
* consistency in testing and feature parity among all, so we should
* try to keep these invariants in place for everybody.
*/
BUG_ON(!(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)));
BUG_ON((vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) ==
(VM_PFNMAP|VM_MIXEDMAP));
BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
BUG_ON((vma->vm_flags & VM_MIXEDMAP) && pfn_valid(pfn));
if (addr < vma->vm_start || addr >= vma->vm_end)
return VM_FAULT_SIGBUS;
if (!pfn_modify_allowed(pfn, pgprot))
return VM_FAULT_SIGBUS;
track_pfn_insert(vma, &pgprot, __pfn_to_pfn_t(pfn, PFN_DEV));
return insert_pfn(vma, addr, __pfn_to_pfn_t(pfn, PFN_DEV), pgprot,
false);
}
EXPORT_SYMBOL(vmf_insert_pfn_prot);
/**
* vmf_insert_pfn - insert single pfn into user vma
* @vma: user vma to map to
* @addr: target user address of this page
* @pfn: source kernel pfn
*
* Similar to vm_insert_page, this allows drivers to insert individual pages
* they've allocated into a user vma. Same comments apply.
*
* This function should only be called from a vm_ops->fault handler, and
* in that case the handler should return the result of this function.
*
* vma cannot be a COW mapping.
*
* As this is called only for pages that do not currently exist, we
* do not need to flush old virtual caches or the TLB.
*
* Context: Process context. May allocate using %GFP_KERNEL.
* Return: vm_fault_t value.
*/
vm_fault_t vmf_insert_pfn(struct vm_area_struct *vma, unsigned long addr,
unsigned long pfn)
{
return vmf_insert_pfn_prot(vma, addr, pfn, vma->vm_page_prot);
}
EXPORT_SYMBOL(vmf_insert_pfn);
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
static bool vm_mixed_ok(struct vm_area_struct *vma, pfn_t pfn, bool mkwrite)
{
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
if (unlikely(is_zero_pfn(pfn_t_to_pfn(pfn))) &&
(mkwrite || !vm_mixed_zeropage_allowed(vma)))
return false;
/* these checks mirror the abort conditions in vm_normal_page */
if (vma->vm_flags & VM_MIXEDMAP)
return true;
if (pfn_t_devmap(pfn))
return true;
if (pfn_t_special(pfn))
return true;
if (is_zero_pfn(pfn_t_to_pfn(pfn)))
return true;
return false;
}
static vm_fault_t __vm_insert_mixed(struct vm_area_struct *vma,
mm: remove unused vmf_insert_mixed_prot() Patch series "Remove drm/ttm-specific mm changes". Functionality was added specifically for the DRM TTM driver to support mapping memory for VM_MIXEDMAP VMAs with customised protection flags, however this has now been rolled back as issues were found with this approach. This series removes the mm changes too, retaining some of the useful comments. This patch (of 3): The sole user of vmf_insert_mixed_prot(), the drm ttm module, stopped using this in commit f91142c62161 ("drm/ttm: nuke VM_MIXEDMAP on BO mappings v3") citing use of VM_MIXEDMAP in this case being terribly broken. Remove this now-dead code and references to it, but retain the useful description of the prot != vma->vm_page_prot case, moving it to vmf_insert_pfn_prot() instead. Link: https://lkml.kernel.org/r/cover.1678661628.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/a069644388e6f1593a7020d15840e6fc9f39bcaf.1678661628.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Aaron Tomlin <atomlin@atomlin.com> Cc: Christoph Lameter <cl@linux.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: "Russell King (Oracle)" <linux@armlinux.org.uk> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-12 23:40:13 +00:00
unsigned long addr, pfn_t pfn, bool mkwrite)
{
mm: remove unused vmf_insert_mixed_prot() Patch series "Remove drm/ttm-specific mm changes". Functionality was added specifically for the DRM TTM driver to support mapping memory for VM_MIXEDMAP VMAs with customised protection flags, however this has now been rolled back as issues were found with this approach. This series removes the mm changes too, retaining some of the useful comments. This patch (of 3): The sole user of vmf_insert_mixed_prot(), the drm ttm module, stopped using this in commit f91142c62161 ("drm/ttm: nuke VM_MIXEDMAP on BO mappings v3") citing use of VM_MIXEDMAP in this case being terribly broken. Remove this now-dead code and references to it, but retain the useful description of the prot != vma->vm_page_prot case, moving it to vmf_insert_pfn_prot() instead. Link: https://lkml.kernel.org/r/cover.1678661628.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/a069644388e6f1593a7020d15840e6fc9f39bcaf.1678661628.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Aaron Tomlin <atomlin@atomlin.com> Cc: Christoph Lameter <cl@linux.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: "Russell King (Oracle)" <linux@armlinux.org.uk> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-12 23:40:13 +00:00
pgprot_t pgprot = vma->vm_page_prot;
int err;
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
if (!vm_mixed_ok(vma, pfn, mkwrite))
return VM_FAULT_SIGBUS;
if (addr < vma->vm_start || addr >= vma->vm_end)
return VM_FAULT_SIGBUS;
track_pfn_insert(vma, &pgprot, pfn);
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
if (!pfn_modify_allowed(pfn_t_to_pfn(pfn), pgprot))
return VM_FAULT_SIGBUS;
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
/*
* If we don't have pte special, then we have to use the pfn_valid()
* based VM_MIXEDMAP scheme (see vm_normal_page), and thus we *must*
* refcount the page if pfn_valid is true (hence insert_page rather
* than insert_pfn). If a zero_pfn were inserted into a VM_MIXEDMAP
* without pte special, it would there be refcounted as a normal page.
*/
if (!IS_ENABLED(CONFIG_ARCH_HAS_PTE_SPECIAL) &&
!pfn_t_devmap(pfn) && pfn_t_valid(pfn)) {
struct page *page;
/*
* At this point we are committed to insert_page()
* regardless of whether the caller specified flags that
* result in pfn_t_has_page() == false.
*/
page = pfn_to_page(pfn_t_to_pfn(pfn));
err = insert_page(vma, addr, page, pgprot);
} else {
return insert_pfn(vma, addr, pfn, pgprot, mkwrite);
}
mm: add vm_insert_mixed_mkwrite() When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. This series solves these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. This reduces memory usage and decreases latencies for some workloads, and it simplifies the DAX code, removing over 100 lines in total. This patch (of 5): To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path. Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:18:35 +00:00
if (err == -ENOMEM)
return VM_FAULT_OOM;
if (err < 0 && err != -EBUSY)
return VM_FAULT_SIGBUS;
return VM_FAULT_NOPAGE;
}
vm_fault_t vmf_insert_mixed(struct vm_area_struct *vma, unsigned long addr,
pfn_t pfn)
{
mm: remove unused vmf_insert_mixed_prot() Patch series "Remove drm/ttm-specific mm changes". Functionality was added specifically for the DRM TTM driver to support mapping memory for VM_MIXEDMAP VMAs with customised protection flags, however this has now been rolled back as issues were found with this approach. This series removes the mm changes too, retaining some of the useful comments. This patch (of 3): The sole user of vmf_insert_mixed_prot(), the drm ttm module, stopped using this in commit f91142c62161 ("drm/ttm: nuke VM_MIXEDMAP on BO mappings v3") citing use of VM_MIXEDMAP in this case being terribly broken. Remove this now-dead code and references to it, but retain the useful description of the prot != vma->vm_page_prot case, moving it to vmf_insert_pfn_prot() instead. Link: https://lkml.kernel.org/r/cover.1678661628.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/a069644388e6f1593a7020d15840e6fc9f39bcaf.1678661628.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Aaron Tomlin <atomlin@atomlin.com> Cc: Christoph Lameter <cl@linux.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: "Russell King (Oracle)" <linux@armlinux.org.uk> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-12 23:40:13 +00:00
return __vm_insert_mixed(vma, addr, pfn, false);
}
EXPORT_SYMBOL(vmf_insert_mixed);
/*
* If the insertion of PTE failed because someone else already added a
* different entry in the mean time, we treat that as success as we assume
* the same entry was actually inserted.
*/
vm_fault_t vmf_insert_mixed_mkwrite(struct vm_area_struct *vma,
unsigned long addr, pfn_t pfn)
mm: add vm_insert_mixed_mkwrite() When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. This series solves these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. This reduces memory usage and decreases latencies for some workloads, and it simplifies the DAX code, removing over 100 lines in total. This patch (of 5): To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path. Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:18:35 +00:00
{
mm: remove unused vmf_insert_mixed_prot() Patch series "Remove drm/ttm-specific mm changes". Functionality was added specifically for the DRM TTM driver to support mapping memory for VM_MIXEDMAP VMAs with customised protection flags, however this has now been rolled back as issues were found with this approach. This series removes the mm changes too, retaining some of the useful comments. This patch (of 3): The sole user of vmf_insert_mixed_prot(), the drm ttm module, stopped using this in commit f91142c62161 ("drm/ttm: nuke VM_MIXEDMAP on BO mappings v3") citing use of VM_MIXEDMAP in this case being terribly broken. Remove this now-dead code and references to it, but retain the useful description of the prot != vma->vm_page_prot case, moving it to vmf_insert_pfn_prot() instead. Link: https://lkml.kernel.org/r/cover.1678661628.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/a069644388e6f1593a7020d15840e6fc9f39bcaf.1678661628.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Aaron Tomlin <atomlin@atomlin.com> Cc: Christoph Lameter <cl@linux.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: "Russell King (Oracle)" <linux@armlinux.org.uk> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-12 23:40:13 +00:00
return __vm_insert_mixed(vma, addr, pfn, true);
mm: add vm_insert_mixed_mkwrite() When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. This series solves these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. This reduces memory usage and decreases latencies for some workloads, and it simplifies the DAX code, removing over 100 lines in total. This patch (of 5): To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path. Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:18:35 +00:00
}
/*
* maps a range of physical memory into the requested pages. the old
* mappings are removed. any references to nonexistent pages results
* in null mappings (currently treated as "copy-on-access")
*/
static int remap_pte_range(struct mm_struct *mm, pmd_t *pmd,
unsigned long addr, unsigned long end,
unsigned long pfn, pgprot_t prot)
{
pte_t *pte, *mapped_pte;
spinlock_t *ptl;
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
int err = 0;
mapped_pte = pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
if (!pte)
return -ENOMEM;
arch_enter_lazy_mmu_mode();
do {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
BUG_ON(!pte_none(ptep_get(pte)));
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
if (!pfn_modify_allowed(pfn, prot)) {
err = -EACCES;
break;
}
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:00 +00:00
set_pte_at(mm, addr, pte, pte_mkspecial(pfn_pte(pfn, prot)));
pfn++;
} while (pte++, addr += PAGE_SIZE, addr != end);
arch_leave_lazy_mmu_mode();
pte_unmap_unlock(mapped_pte, ptl);
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
return err;
}
static inline int remap_pmd_range(struct mm_struct *mm, pud_t *pud,
unsigned long addr, unsigned long end,
unsigned long pfn, pgprot_t prot)
{
pmd_t *pmd;
unsigned long next;
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
int err;
pfn -= addr >> PAGE_SHIFT;
pmd = pmd_alloc(mm, pud, addr);
if (!pmd)
return -ENOMEM;
VM_BUG_ON(pmd_trans_huge(*pmd));
do {
next = pmd_addr_end(addr, end);
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
err = remap_pte_range(mm, pmd, addr, next,
pfn + (addr >> PAGE_SHIFT), prot);
if (err)
return err;
} while (pmd++, addr = next, addr != end);
return 0;
}
static inline int remap_pud_range(struct mm_struct *mm, p4d_t *p4d,
unsigned long addr, unsigned long end,
unsigned long pfn, pgprot_t prot)
{
pud_t *pud;
unsigned long next;
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
int err;
pfn -= addr >> PAGE_SHIFT;
pud = pud_alloc(mm, p4d, addr);
if (!pud)
return -ENOMEM;
do {
next = pud_addr_end(addr, end);
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
err = remap_pmd_range(mm, pud, addr, next,
pfn + (addr >> PAGE_SHIFT), prot);
if (err)
return err;
} while (pud++, addr = next, addr != end);
return 0;
}
static inline int remap_p4d_range(struct mm_struct *mm, pgd_t *pgd,
unsigned long addr, unsigned long end,
unsigned long pfn, pgprot_t prot)
{
p4d_t *p4d;
unsigned long next;
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
int err;
pfn -= addr >> PAGE_SHIFT;
p4d = p4d_alloc(mm, pgd, addr);
if (!p4d)
return -ENOMEM;
do {
next = p4d_addr_end(addr, end);
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
err = remap_pud_range(mm, p4d, addr, next,
pfn + (addr >> PAGE_SHIFT), prot);
if (err)
return err;
} while (p4d++, addr = next, addr != end);
return 0;
}
/*
* Variant of remap_pfn_range that does not call track_pfn_remap. The caller
* must have pre-validated the caching bits of the pgprot_t.
*/
int remap_pfn_range_notrack(struct vm_area_struct *vma, unsigned long addr,
unsigned long pfn, unsigned long size, pgprot_t prot)
{
pgd_t *pgd;
unsigned long next;
unsigned long end = addr + PAGE_ALIGN(size);
struct mm_struct *mm = vma->vm_mm;
int err;
if (WARN_ON_ONCE(!PAGE_ALIGNED(addr)))
return -EINVAL;
/*
* Physically remapped pages are special. Tell the
* rest of the world about it:
* VM_IO tells people not to look at these pages
* (accesses can have side effects).
* VM_PFNMAP tells the core MM that the base pages are just
* raw PFN mappings, and do not have a "struct page" associated
* with them.
mm: kill vma flag VM_RESERVED and mm->reserved_vm counter A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:29:02 +00:00
* VM_DONTEXPAND
* Disable vma merging and expanding with mremap().
* VM_DONTDUMP
* Omit vma from core dump, even when VM_IO turned off.
*
* There's a horrible special case to handle copy-on-write
* behaviour that some programs depend on. We mark the "original"
* un-COW'ed pages by matching them up with "vma->vm_pgoff".
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:34 +00:00
* See vm_normal_page() for details.
*/
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:34 +00:00
if (is_cow_mapping(vma->vm_flags)) {
if (addr != vma->vm_start || end != vma->vm_end)
return -EINVAL;
vma->vm_pgoff = pfn;
mm, x86, pat: rework linear pfn-mmap tracking Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73 ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:28:34 +00:00
}
mm: replace vma->vm_flags direct modifications with modifier calls Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 19:37:49 +00:00
vm_flags_set(vma, VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP);
BUG_ON(addr >= end);
pfn -= addr >> PAGE_SHIFT;
pgd = pgd_offset(mm, addr);
flush_cache_range(vma, addr, end);
do {
next = pgd_addr_end(addr, end);
err = remap_p4d_range(mm, pgd, addr, next,
pfn + (addr >> PAGE_SHIFT), prot);
if (err)
return err;
} while (pgd++, addr = next, addr != end);
return 0;
}
/**
* remap_pfn_range - remap kernel memory to userspace
* @vma: user vma to map to
* @addr: target page aligned user address to start at
* @pfn: page frame number of kernel physical memory address
* @size: size of mapping area
* @prot: page protection flags for this mapping
*
* Note: this is only safe if the mm semaphore is held when called.
*
* Return: %0 on success, negative error code otherwise.
*/
int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr,
unsigned long pfn, unsigned long size, pgprot_t prot)
{
int err;
err = track_pfn_remap(vma, &prot, pfn, addr, PAGE_ALIGN(size));
if (err)
return -EINVAL;
err = remap_pfn_range_notrack(vma, addr, pfn, size, prot);
if (err)
mm: introduce __vm_flags_mod and use it in untrack_pfn There are scenarios when vm_flags can be modified without exclusive mmap_lock, such as: - after VMA was isolated and mmap_lock was downgraded or dropped - in exit_mmap when there are no other mm users and locking is unnecessary Introduce __vm_flags_mod to avoid assertions when the caller takes responsibility for the required locking. Pass a hint to untrack_pfn to conditionally use __vm_flags_mod for flags modification to avoid assertion. Link: https://lkml.kernel.org/r/20230126193752.297968-7-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-26 19:37:51 +00:00
untrack_pfn(vma, pfn, PAGE_ALIGN(size), true);
return err;
}
EXPORT_SYMBOL(remap_pfn_range);
/**
* vm_iomap_memory - remap memory to userspace
* @vma: user vma to map to
* @start: start of the physical memory to be mapped
* @len: size of area
*
* This is a simplified io_remap_pfn_range() for common driver use. The
* driver just needs to give us the physical memory range to be mapped,
* we'll figure out the rest from the vma information.
*
* NOTE! Some drivers might want to tweak vma->vm_page_prot first to get
* whatever write-combining details or similar.
*
* Return: %0 on success, negative error code otherwise.
*/
int vm_iomap_memory(struct vm_area_struct *vma, phys_addr_t start, unsigned long len)
{
unsigned long vm_len, pfn, pages;
/* Check that the physical memory area passed in looks valid */
if (start + len < start)
return -EINVAL;
/*
* You *really* shouldn't map things that aren't page-aligned,
* but we've historically allowed it because IO memory might
* just have smaller alignment.
*/
len += start & ~PAGE_MASK;
pfn = start >> PAGE_SHIFT;
pages = (len + ~PAGE_MASK) >> PAGE_SHIFT;
if (pfn + pages < pfn)
return -EINVAL;
/* We start the mapping 'vm_pgoff' pages into the area */
if (vma->vm_pgoff > pages)
return -EINVAL;
pfn += vma->vm_pgoff;
pages -= vma->vm_pgoff;
/* Can we fit all of the mapping? */
vm_len = vma->vm_end - vma->vm_start;
if (vm_len >> PAGE_SHIFT > pages)
return -EINVAL;
/* Ok, let it rip */
return io_remap_pfn_range(vma, vma->vm_start, pfn, vm_len, vma->vm_page_prot);
}
EXPORT_SYMBOL(vm_iomap_memory);
static int apply_to_pte_range(struct mm_struct *mm, pmd_t *pmd,
unsigned long addr, unsigned long end,
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
pte_fn_t fn, void *data, bool create,
pgtbl_mod_mask *mask)
{
pte_t *pte, *mapped_pte;
int err = 0;
treewide: Remove uninitialized_var() usage Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 20:09:38 +00:00
spinlock_t *ptl;
if (create) {
mapped_pte = pte = (mm == &init_mm) ?
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
pte_alloc_kernel_track(pmd, addr, mask) :
pte_alloc_map_lock(mm, pmd, addr, &ptl);
if (!pte)
return -ENOMEM;
} else {
mapped_pte = pte = (mm == &init_mm) ?
pte_offset_kernel(pmd, addr) :
pte_offset_map_lock(mm, pmd, addr, &ptl);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (!pte)
return -EINVAL;
}
arch_enter_lazy_mmu_mode();
if (fn) {
do {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (create || !pte_none(ptep_get(pte))) {
err = fn(pte++, addr, data);
if (err)
break;
}
} while (addr += PAGE_SIZE, addr != end);
}
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
*mask |= PGTBL_PTE_MODIFIED;
arch_leave_lazy_mmu_mode();
if (mm != &init_mm)
pte_unmap_unlock(mapped_pte, ptl);
return err;
}
static int apply_to_pmd_range(struct mm_struct *mm, pud_t *pud,
unsigned long addr, unsigned long end,
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
pte_fn_t fn, void *data, bool create,
pgtbl_mod_mask *mask)
{
pmd_t *pmd;
unsigned long next;
int err = 0;
mm/treewide: replace pXd_huge() with pXd_leaf() Now after we're sure all pXd_huge() definitions are the same as pXd_leaf(), reuse it. Luckily, pXd_huge() isn't widely used. Link: https://lkml.kernel.org/r/20240318200404.448346-12-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <festevam@denx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Salter <msalter@redhat.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-18 20:04:01 +00:00
BUG_ON(pud_leaf(*pud));
if (create) {
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
pmd = pmd_alloc_track(mm, pud, addr, mask);
if (!pmd)
return -ENOMEM;
} else {
pmd = pmd_offset(pud, addr);
}
do {
next = pmd_addr_end(addr, end);
if (pmd_none(*pmd) && !create)
continue;
if (WARN_ON_ONCE(pmd_leaf(*pmd)))
return -EINVAL;
if (!pmd_none(*pmd) && WARN_ON_ONCE(pmd_bad(*pmd))) {
if (!create)
continue;
pmd_clear_bad(pmd);
}
err = apply_to_pte_range(mm, pmd, addr, next,
fn, data, create, mask);
if (err)
break;
} while (pmd++, addr = next, addr != end);
return err;
}
static int apply_to_pud_range(struct mm_struct *mm, p4d_t *p4d,
unsigned long addr, unsigned long end,
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
pte_fn_t fn, void *data, bool create,
pgtbl_mod_mask *mask)
{
pud_t *pud;
unsigned long next;
int err = 0;
if (create) {
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
pud = pud_alloc_track(mm, p4d, addr, mask);
if (!pud)
return -ENOMEM;
} else {
pud = pud_offset(p4d, addr);
}
do {
next = pud_addr_end(addr, end);
if (pud_none(*pud) && !create)
continue;
if (WARN_ON_ONCE(pud_leaf(*pud)))
return -EINVAL;
if (!pud_none(*pud) && WARN_ON_ONCE(pud_bad(*pud))) {
if (!create)
continue;
pud_clear_bad(pud);
}
err = apply_to_pmd_range(mm, pud, addr, next,
fn, data, create, mask);
if (err)
break;
} while (pud++, addr = next, addr != end);
return err;
}
static int apply_to_p4d_range(struct mm_struct *mm, pgd_t *pgd,
unsigned long addr, unsigned long end,
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
pte_fn_t fn, void *data, bool create,
pgtbl_mod_mask *mask)
{
p4d_t *p4d;
unsigned long next;
int err = 0;
if (create) {
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
p4d = p4d_alloc_track(mm, pgd, addr, mask);
if (!p4d)
return -ENOMEM;
} else {
p4d = p4d_offset(pgd, addr);
}
do {
next = p4d_addr_end(addr, end);
if (p4d_none(*p4d) && !create)
continue;
if (WARN_ON_ONCE(p4d_leaf(*p4d)))
return -EINVAL;
if (!p4d_none(*p4d) && WARN_ON_ONCE(p4d_bad(*p4d))) {
if (!create)
continue;
p4d_clear_bad(p4d);
}
err = apply_to_pud_range(mm, p4d, addr, next,
fn, data, create, mask);
if (err)
break;
} while (p4d++, addr = next, addr != end);
return err;
}
static int __apply_to_page_range(struct mm_struct *mm, unsigned long addr,
unsigned long size, pte_fn_t fn,
void *data, bool create)
{
pgd_t *pgd;
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
unsigned long start = addr, next;
unsigned long end = addr + size;
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
pgtbl_mod_mask mask = 0;
int err = 0;
if (WARN_ON(addr >= end))
return -EINVAL;
pgd = pgd_offset(mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none(*pgd) && !create)
continue;
if (WARN_ON_ONCE(pgd_leaf(*pgd)))
return -EINVAL;
if (!pgd_none(*pgd) && WARN_ON_ONCE(pgd_bad(*pgd))) {
if (!create)
continue;
pgd_clear_bad(pgd);
}
err = apply_to_p4d_range(mm, pgd, addr, next,
fn, data, create, &mask);
if (err)
break;
} while (pgd++, addr = next, addr != end);
mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-04 23:35:43 +00:00
if (mask & ARCH_PAGE_TABLE_SYNC_MASK)
arch_sync_kernel_mappings(start, start + size);
return err;
}
/*
* Scan a region of virtual memory, filling in page tables as necessary
* and calling a provided function on each leaf page table.
*/
int apply_to_page_range(struct mm_struct *mm, unsigned long addr,
unsigned long size, pte_fn_t fn, void *data)
{
return __apply_to_page_range(mm, addr, size, fn, data, true);
}
EXPORT_SYMBOL_GPL(apply_to_page_range);
/*
* Scan a region of virtual memory, calling a provided function on
* each leaf page table where it exists.
*
* Unlike apply_to_page_range, this does _not_ fill in page tables
* where they are absent.
*/
int apply_to_existing_page_range(struct mm_struct *mm, unsigned long addr,
unsigned long size, pte_fn_t fn, void *data)
{
return __apply_to_page_range(mm, addr, size, fn, data, false);
}
EXPORT_SYMBOL_GPL(apply_to_existing_page_range);
/*
* handle_pte_fault chooses page fault handler according to an entry which was
* read non-atomically. Before making any commitment, on those architectures
* or configurations (e.g. i386 with PAE) which might give a mix of unmatched
* parts, do_swap_page must check under lock before unmapping the pte and
* proceeding (but do_wp_page is only called after already making such a check;
* and do_anonymous_page can safely check later on).
*/
static inline int pte_unmap_same(struct vm_fault *vmf)
{
int same = 1;
#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPTION)
if (sizeof(pte_t) > sizeof(unsigned long)) {
mm/memory: handle_pte_fault() use pte_offset_map_nolock() handle_pte_fault() use pte_offset_map_nolock() to get the vmf.ptl which corresponds to vmf.pte, instead of pte_lockptr() being used later, when there's a chance that the pmd entry might have changed, perhaps to none, or to a huge pmd, with no split ptlock in its struct page. Remove its pmd_devmap_trans_unstable() call: pte_offset_map_nolock() will handle that case by failing. Update the "morph" comment above, looking forward to when shmem or file collapse to THP may not take mmap_lock for write (or not at all). do_numa_page() use the vmf->ptl from handle_pte_fault() at first, but refresh it when refreshing vmf->pte. do_swap_page()'s pte_unmap_same() (the thing that takes ptl to verify a two-part PAE orig_pte) use the vmf->ptl from handle_pte_fault() too; but do_swap_page() is also used by anon THP's __collapse_huge_page_swapin(), so adjust that to set vmf->ptl by pte_offset_map_nolock(). Link: https://lkml.kernel.org/r/c1107654-3929-60ac-223e-6877cbb86065@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:45:05 +00:00
spin_lock(vmf->ptl);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
same = pte_same(ptep_get(vmf->pte), vmf->orig_pte);
mm/memory: handle_pte_fault() use pte_offset_map_nolock() handle_pte_fault() use pte_offset_map_nolock() to get the vmf.ptl which corresponds to vmf.pte, instead of pte_lockptr() being used later, when there's a chance that the pmd entry might have changed, perhaps to none, or to a huge pmd, with no split ptlock in its struct page. Remove its pmd_devmap_trans_unstable() call: pte_offset_map_nolock() will handle that case by failing. Update the "morph" comment above, looking forward to when shmem or file collapse to THP may not take mmap_lock for write (or not at all). do_numa_page() use the vmf->ptl from handle_pte_fault() at first, but refresh it when refreshing vmf->pte. do_swap_page()'s pte_unmap_same() (the thing that takes ptl to verify a two-part PAE orig_pte) use the vmf->ptl from handle_pte_fault() too; but do_swap_page() is also used by anon THP's __collapse_huge_page_swapin(), so adjust that to set vmf->ptl by pte_offset_map_nolock(). Link: https://lkml.kernel.org/r/c1107654-3929-60ac-223e-6877cbb86065@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:45:05 +00:00
spin_unlock(vmf->ptl);
}
#endif
pte_unmap(vmf->pte);
vmf->pte = NULL;
return same;
}
mm, hwpoison: try to recover from copy-on write faults Patch series "Copy-on-write poison recovery", v3. Part 1 deals with the process that triggered the copy on write fault with a store to a shared read-only page. That process is send a SIGBUS with the usual machine check decoration to specify the virtual address of the lost page, together with the scope. Part 2 sets up to asynchronously take the page with the uncorrected error offline to prevent additional machine check faults. H/t to Miaohe Lin <linmiaohe@huawei.com> and Shuai Xue <xueshuai@linux.alibaba.com> for pointing me to the existing function to queue a call to memory_failure(). On x86 there is some duplicate reporting (because the error is also signalled by the memory controller as well as by the core that triggered the machine check). Console logs look like this: This patch (of 2): If the kernel is copying a page as the result of a copy-on-write fault and runs into an uncorrectable error, Linux will crash because it does not have recovery code for this case where poison is consumed by the kernel. It is easy to set up a test case. Just inject an error into a private page, fork(2), and have the child process write to the page. I wrapped that neatly into a test at: git://git.kernel.org/pub/scm/linux/kernel/git/aegl/ras-tools.git just enable ACPI error injection and run: # ./einj_mem-uc -f copy-on-write Add a new copy_user_highpage_mc() function that uses copy_mc_to_kernel() on architectures where that is available (currently x86 and powerpc). When an error is detected during the page copy, return VM_FAULT_HWPOISON to caller of wp_page_copy(). This propagates up the call stack. Both x86 and powerpc have code in their fault handler to deal with this code by sending a SIGBUS to the application. Note that this patch avoids a system crash and signals the process that triggered the copy-on-write action. It does not take any action for the memory error that is still in the shared page. To handle that a call to memory_failure() is needed. But this cannot be done from wp_page_copy() because it holds mmap_lock(). Perhaps the architecture fault handlers can deal with this loose end in a subsequent patch? On Intel/x86 this loose end will often be handled automatically because the memory controller provides an additional notification of the h/w poison in memory, the handler for this will call memory_failure(). This isn't a 100% solution. If there are multiple errors, not all may be logged in this way. [tony.luck@intel.com: add call to kmsan_unpoison_memory(), per Miaohe Lin] Link: https://lkml.kernel.org/r/20221031201029.102123-2-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-1-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-2-tony.luck@intel.com Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-21 20:01:19 +00:00
/*
* Return:
* 0: copied succeeded
* -EHWPOISON: copy failed due to hwpoison in source page
* -EAGAIN: copied failed (some other reason)
*/
static inline int __wp_page_copy_user(struct page *dst, struct page *src,
struct vm_fault *vmf)
{
mm, hwpoison: try to recover from copy-on write faults Patch series "Copy-on-write poison recovery", v3. Part 1 deals with the process that triggered the copy on write fault with a store to a shared read-only page. That process is send a SIGBUS with the usual machine check decoration to specify the virtual address of the lost page, together with the scope. Part 2 sets up to asynchronously take the page with the uncorrected error offline to prevent additional machine check faults. H/t to Miaohe Lin <linmiaohe@huawei.com> and Shuai Xue <xueshuai@linux.alibaba.com> for pointing me to the existing function to queue a call to memory_failure(). On x86 there is some duplicate reporting (because the error is also signalled by the memory controller as well as by the core that triggered the machine check). Console logs look like this: This patch (of 2): If the kernel is copying a page as the result of a copy-on-write fault and runs into an uncorrectable error, Linux will crash because it does not have recovery code for this case where poison is consumed by the kernel. It is easy to set up a test case. Just inject an error into a private page, fork(2), and have the child process write to the page. I wrapped that neatly into a test at: git://git.kernel.org/pub/scm/linux/kernel/git/aegl/ras-tools.git just enable ACPI error injection and run: # ./einj_mem-uc -f copy-on-write Add a new copy_user_highpage_mc() function that uses copy_mc_to_kernel() on architectures where that is available (currently x86 and powerpc). When an error is detected during the page copy, return VM_FAULT_HWPOISON to caller of wp_page_copy(). This propagates up the call stack. Both x86 and powerpc have code in their fault handler to deal with this code by sending a SIGBUS to the application. Note that this patch avoids a system crash and signals the process that triggered the copy-on-write action. It does not take any action for the memory error that is still in the shared page. To handle that a call to memory_failure() is needed. But this cannot be done from wp_page_copy() because it holds mmap_lock(). Perhaps the architecture fault handlers can deal with this loose end in a subsequent patch? On Intel/x86 this loose end will often be handled automatically because the memory controller provides an additional notification of the h/w poison in memory, the handler for this will call memory_failure(). This isn't a 100% solution. If there are multiple errors, not all may be logged in this way. [tony.luck@intel.com: add call to kmsan_unpoison_memory(), per Miaohe Lin] Link: https://lkml.kernel.org/r/20221031201029.102123-2-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-1-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-2-tony.luck@intel.com Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-21 20:01:19 +00:00
int ret;
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
void *kaddr;
void __user *uaddr;
struct vm_area_struct *vma = vmf->vma;
struct mm_struct *mm = vma->vm_mm;
unsigned long addr = vmf->address;
if (likely(src)) {
mm: move memory_failure_queue() into copy_mc_[user]_highpage() Patch series "mm: migrate: support poison recover from migrate folio", v5. The folio migration is widely used in kernel, memory compaction, memory hotplug, soft offline page, numa balance, memory demote/promotion, etc, but once access a poisoned source folio when migrating, the kernel will panic. There is a mechanism in the kernel to recover from uncorrectable memory errors, ARCH_HAS_COPY_MC(eg, Machine Check Safe Memory Copy on x86), which is already used in NVDIMM or core-mm paths(eg, CoW, khugepaged, coredump, ksm copy), see copy_mc_to_{user,kernel}, copy_mc_{user_}highpage callers. This series of patches provide the recovery mechanism from folio copy for the widely used folio migration. Please note, because folio migration is no guarantee of success, so we could chose to make folio migration tolerant of memory failures, adding folio_mc_copy() which is a #MC versions of folio_copy(), once accessing a poisoned source folio, we could return error and make the folio migration fail, and this could avoid the similar panic shown below. CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0 pc : copy_page+0x10/0xc0 lr : copy_highpage+0x38/0x50 ... Call trace: copy_page+0x10/0xc0 folio_copy+0x78/0x90 migrate_folio_extra+0x54/0xa0 move_to_new_folio+0xd8/0x1f0 migrate_folio_move+0xb8/0x300 migrate_pages_batch+0x528/0x788 migrate_pages_sync+0x8c/0x258 migrate_pages+0x440/0x528 soft_offline_in_use_page+0x2ec/0x3c0 soft_offline_page+0x238/0x310 soft_offline_page_store+0x6c/0xc0 dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x130/0x1c8 new_sync_write+0xa4/0x138 vfs_write+0x238/0x2d8 ksys_write+0x74/0x110 This patch (of 5): There is a memory_failure_queue() call after copy_mc_[user]_highpage(), see callers, eg, CoW/KSM page copy, it is used to mark the source page as h/w poisoned and unmap it from other tasks, and the upcomming poison recover from migrate folio will do the similar thing, so let's move the memory_failure_queue() into the copy_mc_[user]_highpage() instead of adding it into each user, this should also enhance the handling of poisoned page in khugepaged. Link: https://lkml.kernel.org/r/20240626085328.608006-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240626085328.608006-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 08:53:23 +00:00
if (copy_mc_user_highpage(dst, src, addr, vma))
mm, hwpoison: try to recover from copy-on write faults Patch series "Copy-on-write poison recovery", v3. Part 1 deals with the process that triggered the copy on write fault with a store to a shared read-only page. That process is send a SIGBUS with the usual machine check decoration to specify the virtual address of the lost page, together with the scope. Part 2 sets up to asynchronously take the page with the uncorrected error offline to prevent additional machine check faults. H/t to Miaohe Lin <linmiaohe@huawei.com> and Shuai Xue <xueshuai@linux.alibaba.com> for pointing me to the existing function to queue a call to memory_failure(). On x86 there is some duplicate reporting (because the error is also signalled by the memory controller as well as by the core that triggered the machine check). Console logs look like this: This patch (of 2): If the kernel is copying a page as the result of a copy-on-write fault and runs into an uncorrectable error, Linux will crash because it does not have recovery code for this case where poison is consumed by the kernel. It is easy to set up a test case. Just inject an error into a private page, fork(2), and have the child process write to the page. I wrapped that neatly into a test at: git://git.kernel.org/pub/scm/linux/kernel/git/aegl/ras-tools.git just enable ACPI error injection and run: # ./einj_mem-uc -f copy-on-write Add a new copy_user_highpage_mc() function that uses copy_mc_to_kernel() on architectures where that is available (currently x86 and powerpc). When an error is detected during the page copy, return VM_FAULT_HWPOISON to caller of wp_page_copy(). This propagates up the call stack. Both x86 and powerpc have code in their fault handler to deal with this code by sending a SIGBUS to the application. Note that this patch avoids a system crash and signals the process that triggered the copy-on-write action. It does not take any action for the memory error that is still in the shared page. To handle that a call to memory_failure() is needed. But this cannot be done from wp_page_copy() because it holds mmap_lock(). Perhaps the architecture fault handlers can deal with this loose end in a subsequent patch? On Intel/x86 this loose end will often be handled automatically because the memory controller provides an additional notification of the h/w poison in memory, the handler for this will call memory_failure(). This isn't a 100% solution. If there are multiple errors, not all may be logged in this way. [tony.luck@intel.com: add call to kmsan_unpoison_memory(), per Miaohe Lin] Link: https://lkml.kernel.org/r/20221031201029.102123-2-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-1-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-2-tony.luck@intel.com Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-21 20:01:19 +00:00
return -EHWPOISON;
return 0;
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
}
/*
* If the source page was a PFN mapping, we don't have
* a "struct page" for it. We do a best-effort copy by
* just copying from the original user address. If that
* fails, we just zero-fill it. Live with it.
*/
kaddr = kmap_local_page(dst);
pagefault_disable();
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
uaddr = (void __user *)(addr & PAGE_MASK);
/*
* On architectures with software "accessed" bits, we would
* take a double page fault, so mark it accessed here.
*/
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
vmf->pte = NULL;
mm: x86, arm64: add arch_has_hw_pte_young() Patch series "Multi-Gen LRU Framework", v14. What's new ========== 1. OpenWrt, in addition to Android, Arch Linux Zen, Armbian, ChromeOS, Liquorix, post-factum and XanMod, is now shipping MGLRU on 5.15. 2. Fixed long-tailed direct reclaim latency seen on high-memory (TBs) machines. The old direct reclaim backoff, which tries to enforce a minimum fairness among all eligible memcgs, over-swapped by about (total_mem>>DEF_PRIORITY)-nr_to_reclaim. The new backoff, which pulls the plug on swapping once the target is met, trades some fairness for curtailed latency: https://lore.kernel.org/r/20220918080010.2920238-10-yuzhao@google.com/ 3. Fixed minior build warnings and conflicts. More comments and nits. TLDR ==== The current page reclaim is too expensive in terms of CPU usage and it often makes poor choices about what to evict. This patchset offers an alternative solution that is performant, versatile and straightforward. Patchset overview ================= The design and implementation overview is in patch 14: https://lore.kernel.org/r/20220918080010.2920238-15-yuzhao@google.com/ 01. mm: x86, arm64: add arch_has_hw_pte_young() 02. mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG Take advantage of hardware features when trying to clear the accessed bit in many PTEs. 03. mm/vmscan.c: refactor shrink_node() 04. Revert "include/linux/mm_inline.h: fold __update_lru_size() into its sole caller" Minor refactors to improve readability for the following patches. 05. mm: multi-gen LRU: groundwork Adds the basic data structure and the functions that insert pages to and remove pages from the multi-gen LRU (MGLRU) lists. 06. mm: multi-gen LRU: minimal implementation A minimal implementation without optimizations. 07. mm: multi-gen LRU: exploit locality in rmap Exploits spatial locality to improve efficiency when using the rmap. 08. mm: multi-gen LRU: support page table walks Further exploits spatial locality by optionally scanning page tables. 09. mm: multi-gen LRU: optimize multiple memcgs Optimizes the overall performance for multiple memcgs running mixed types of workloads. 10. mm: multi-gen LRU: kill switch Adds a kill switch to enable or disable MGLRU at runtime. 11. mm: multi-gen LRU: thrashing prevention 12. mm: multi-gen LRU: debugfs interface Provide userspace with features like thrashing prevention, working set estimation and proactive reclaim. 13. mm: multi-gen LRU: admin guide 14. mm: multi-gen LRU: design doc Add an admin guide and a design doc. Benchmark results ================= Independent lab results ----------------------- Based on the popularity of searches [01] and the memory usage in Google's public cloud, the most popular open-source memory-hungry applications, in alphabetical order, are: Apache Cassandra Memcached Apache Hadoop MongoDB Apache Spark PostgreSQL MariaDB (MySQL) Redis An independent lab evaluated MGLRU with the most widely used benchmark suites for the above applications. They posted 960 data points along with kernel metrics and perf profiles collected over more than 500 hours of total benchmark time. Their final reports show that, with 95% confidence intervals (CIs), the above applications all performed significantly better for at least part of their benchmark matrices. On 5.14: 1. Apache Spark [02] took 95% CIs [9.28, 11.19]% and [12.20, 14.93]% less wall time to sort three billion random integers, respectively, under the medium- and the high-concurrency conditions, when overcommitting memory. There were no statistically significant changes in wall time for the rest of the benchmark matrix. 2. MariaDB [03] achieved 95% CIs [5.24, 10.71]% and [20.22, 25.97]% more transactions per minute (TPM), respectively, under the medium- and the high-concurrency conditions, when overcommitting memory. There were no statistically significant changes in TPM for the rest of the benchmark matrix. 3. Memcached [04] achieved 95% CIs [23.54, 32.25]%, [20.76, 41.61]% and [21.59, 30.02]% more operations per second (OPS), respectively, for sequential access, random access and Gaussian (distribution) access, when THP=always; 95% CIs [13.85, 15.97]% and [23.94, 29.92]% more OPS, respectively, for random access and Gaussian access, when THP=never. There were no statistically significant changes in OPS for the rest of the benchmark matrix. 4. MongoDB [05] achieved 95% CIs [2.23, 3.44]%, [6.97, 9.73]% and [2.16, 3.55]% more operations per second (OPS), respectively, for exponential (distribution) access, random access and Zipfian (distribution) access, when underutilizing memory; 95% CIs [8.83, 10.03]%, [21.12, 23.14]% and [5.53, 6.46]% more OPS, respectively, for exponential access, random access and Zipfian access, when overcommitting memory. On 5.15: 5. Apache Cassandra [06] achieved 95% CIs [1.06, 4.10]%, [1.94, 5.43]% and [4.11, 7.50]% more operations per second (OPS), respectively, for exponential (distribution) access, random access and Zipfian (distribution) access, when swap was off; 95% CIs [0.50, 2.60]%, [6.51, 8.77]% and [3.29, 6.75]% more OPS, respectively, for exponential access, random access and Zipfian access, when swap was on. 6. Apache Hadoop [07] took 95% CIs [5.31, 9.69]% and [2.02, 7.86]% less average wall time to finish twelve parallel TeraSort jobs, respectively, under the medium- and the high-concurrency conditions, when swap was on. There were no statistically significant changes in average wall time for the rest of the benchmark matrix. 7. PostgreSQL [08] achieved 95% CI [1.75, 6.42]% more transactions per minute (TPM) under the high-concurrency condition, when swap was off; 95% CIs [12.82, 18.69]% and [22.70, 46.86]% more TPM, respectively, under the medium- and the high-concurrency conditions, when swap was on. There were no statistically significant changes in TPM for the rest of the benchmark matrix. 8. Redis [09] achieved 95% CIs [0.58, 5.94]%, [6.55, 14.58]% and [11.47, 19.36]% more total operations per second (OPS), respectively, for sequential access, random access and Gaussian (distribution) access, when THP=always; 95% CIs [1.27, 3.54]%, [10.11, 14.81]% and [8.75, 13.64]% more total OPS, respectively, for sequential access, random access and Gaussian access, when THP=never. Our lab results --------------- To supplement the above results, we ran the following benchmark suites on 5.16-rc7 and found no regressions [10]. fs_fio_bench_hdd_mq pft fs_lmbench pgsql-hammerdb fs_parallelio redis fs_postmark stream hackbench sysbenchthread kernbench tpcc_spark memcached unixbench multichase vm-scalability mutilate will-it-scale nginx [01] https://trends.google.com [02] https://lore.kernel.org/r/20211102002002.92051-1-bot@edi.works/ [03] https://lore.kernel.org/r/20211009054315.47073-1-bot@edi.works/ [04] https://lore.kernel.org/r/20211021194103.65648-1-bot@edi.works/ [05] https://lore.kernel.org/r/20211109021346.50266-1-bot@edi.works/ [06] https://lore.kernel.org/r/20211202062806.80365-1-bot@edi.works/ [07] https://lore.kernel.org/r/20211209072416.33606-1-bot@edi.works/ [08] https://lore.kernel.org/r/20211218071041.24077-1-bot@edi.works/ [09] https://lore.kernel.org/r/20211122053248.57311-1-bot@edi.works/ [10] https://lore.kernel.org/r/20220104202247.2903702-1-yuzhao@google.com/ Read-world applications ======================= Third-party testimonials ------------------------ Konstantin reported [11]: I have Archlinux with 8G RAM + zswap + swap. While developing, I have lots of apps opened such as multiple LSP-servers for different langs, chats, two browsers, etc... Usually, my system gets quickly to a point of SWAP-storms, where I have to kill LSP-servers, restart browsers to free memory, etc, otherwise the system lags heavily and is barely usable. 1.5 day ago I migrated from 5.11.15 kernel to 5.12 + the LRU patchset, and I started up by opening lots of apps to create memory pressure, and worked for a day like this. Till now I had not a single SWAP-storm, and mind you I got 3.4G in SWAP. I was never getting to the point of 3G in SWAP before without a single SWAP-storm. Vaibhav from IBM reported [12]: In a synthetic MongoDB Benchmark, seeing an average of ~19% throughput improvement on POWER10(Radix MMU + 64K Page Size) with MGLRU patches on top of 5.16 kernel for MongoDB + YCSB across three different request distributions, namely, Exponential, Uniform and Zipfan. Shuang from U of Rochester reported [13]: With the MGLRU, fio achieved 95% CIs [38.95, 40.26]%, [4.12, 6.64]% and [9.26, 10.36]% higher throughput, respectively, for random access, Zipfian (distribution) access and Gaussian (distribution) access, when the average number of jobs per CPU is 1; 95% CIs [42.32, 49.15]%, [9.44, 9.89]% and [20.99, 22.86]% higher throughput, respectively, for random access, Zipfian access and Gaussian access, when the average number of jobs per CPU is 2. Daniel from Michigan Tech reported [14]: With Memcached allocating ~100GB of byte-addressable Optante, performance improvement in terms of throughput (measured as queries per second) was about 10% for a series of workloads. Large-scale deployments ----------------------- We've rolled out MGLRU to tens of millions of ChromeOS users and about a million Android users. Google's fleetwide profiling [15] shows an overall 40% decrease in kswapd CPU usage, in addition to improvements in other UX metrics, e.g., an 85% decrease in the number of low-memory kills at the 75th percentile and an 18% decrease in app launch time at the 50th percentile. The downstream kernels that have been using MGLRU include: 1. Android [16] 2. Arch Linux Zen [17] 3. Armbian [18] 4. ChromeOS [19] 5. Liquorix [20] 6. OpenWrt [21] 7. post-factum [22] 8. XanMod [23] [11] https://lore.kernel.org/r/140226722f2032c86301fbd326d91baefe3d7d23.camel@yandex.ru/ [12] https://lore.kernel.org/r/87czj3mux0.fsf@vajain21.in.ibm.com/ [13] https://lore.kernel.org/r/20220105024423.26409-1-szhai2@cs.rochester.edu/ [14] https://lore.kernel.org/r/CA+4-3vksGvKd18FgRinxhqHetBS1hQekJE2gwco8Ja-bJWKtFw@mail.gmail.com/ [15] https://dl.acm.org/doi/10.1145/2749469.2750392 [16] https://android.com [17] https://archlinux.org [18] https://armbian.com [19] https://chromium.org [20] https://liquorix.net [21] https://openwrt.org [22] https://codeberg.org/pf-kernel [23] https://xanmod.org Summary ======= The facts are: 1. The independent lab results and the real-world applications indicate substantial improvements; there are no known regressions. 2. Thrashing prevention, working set estimation and proactive reclaim work out of the box; there are no equivalent solutions. 3. There is a lot of new code; no smaller changes have been demonstrated similar effects. Our options, accordingly, are: 1. Given the amount of evidence, the reported improvements will likely materialize for a wide range of workloads. 2. Gauging the interest from the past discussions, the new features will likely be put to use for both personal computers and data centers. 3. Based on Google's track record, the new code will likely be well maintained in the long term. It'd be more difficult if not impossible to achieve similar effects with other approaches. This patch (of 14): Some architectures automatically set the accessed bit in PTEs, e.g., x86 and arm64 v8.2. On architectures that do not have this capability, clearing the accessed bit in a PTE usually triggers a page fault following the TLB miss of this PTE (to emulate the accessed bit). Being aware of this capability can help make better decisions, e.g., whether to spread the work out over a period of time to reduce bursty page faults when trying to clear the accessed bit in many PTEs. Note that theoretically this capability can be unreliable, e.g., hotplugged CPUs might be different from builtin ones. Therefore it should not be used in architecture-independent code that involves correctness, e.g., to determine whether TLB flushes are required (in combination with the accessed bit). Link: https://lkml.kernel.org/r/20220918080010.2920238-1-yuzhao@google.com Link: https://lkml.kernel.org/r/20220918080010.2920238-2-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Acked-by: Will Deacon <will@kernel.org> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 07:59:58 +00:00
if (!arch_has_hw_pte_young() && !pte_young(vmf->orig_pte)) {
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
pte_t entry;
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
vmf->pte = pte_offset_map_lock(mm, vmf->pmd, addr, &vmf->ptl);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (unlikely(!vmf->pte || !pte_same(ptep_get(vmf->pte), vmf->orig_pte))) {
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
/*
* Other thread has already handled the fault
* and update local tlb only
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
*/
perf/core: allow pte_offset_map() to fail In rare transient cases, not yet made possible, pte_offset_map() and pte_offet_map_lock() may not find a page table: handle appropriately. [hughd@google.com: __wp_page_copy_user(): don't call update_mmu_tlb() with NULL] Link: https://lkml.kernel.org/r/1a4db221-7872-3594-57ce-42369945ec8d@google.com Link: https://lkml.kernel.org/r/a194441b-63f3-adb6-5964-7ca3171ae7c2@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:53:23 +00:00
if (vmf->pte)
update_mmu_tlb(vma, addr, vmf->pte);
mm, hwpoison: try to recover from copy-on write faults Patch series "Copy-on-write poison recovery", v3. Part 1 deals with the process that triggered the copy on write fault with a store to a shared read-only page. That process is send a SIGBUS with the usual machine check decoration to specify the virtual address of the lost page, together with the scope. Part 2 sets up to asynchronously take the page with the uncorrected error offline to prevent additional machine check faults. H/t to Miaohe Lin <linmiaohe@huawei.com> and Shuai Xue <xueshuai@linux.alibaba.com> for pointing me to the existing function to queue a call to memory_failure(). On x86 there is some duplicate reporting (because the error is also signalled by the memory controller as well as by the core that triggered the machine check). Console logs look like this: This patch (of 2): If the kernel is copying a page as the result of a copy-on-write fault and runs into an uncorrectable error, Linux will crash because it does not have recovery code for this case where poison is consumed by the kernel. It is easy to set up a test case. Just inject an error into a private page, fork(2), and have the child process write to the page. I wrapped that neatly into a test at: git://git.kernel.org/pub/scm/linux/kernel/git/aegl/ras-tools.git just enable ACPI error injection and run: # ./einj_mem-uc -f copy-on-write Add a new copy_user_highpage_mc() function that uses copy_mc_to_kernel() on architectures where that is available (currently x86 and powerpc). When an error is detected during the page copy, return VM_FAULT_HWPOISON to caller of wp_page_copy(). This propagates up the call stack. Both x86 and powerpc have code in their fault handler to deal with this code by sending a SIGBUS to the application. Note that this patch avoids a system crash and signals the process that triggered the copy-on-write action. It does not take any action for the memory error that is still in the shared page. To handle that a call to memory_failure() is needed. But this cannot be done from wp_page_copy() because it holds mmap_lock(). Perhaps the architecture fault handlers can deal with this loose end in a subsequent patch? On Intel/x86 this loose end will often be handled automatically because the memory controller provides an additional notification of the h/w poison in memory, the handler for this will call memory_failure(). This isn't a 100% solution. If there are multiple errors, not all may be logged in this way. [tony.luck@intel.com: add call to kmsan_unpoison_memory(), per Miaohe Lin] Link: https://lkml.kernel.org/r/20221031201029.102123-2-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-1-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-2-tony.luck@intel.com Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-21 20:01:19 +00:00
ret = -EAGAIN;
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
goto pte_unlock;
}
entry = pte_mkyoung(vmf->orig_pte);
if (ptep_set_access_flags(vma, addr, vmf->pte, entry, 0))
update_mmu_cache_range(vmf, vma, addr, vmf->pte, 1);
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
}
/*
* This really shouldn't fail, because the page is there
* in the page tables. But it might just be unreadable,
* in which case we just give up and fill the result with
* zeroes.
*/
if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE)) {
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (vmf->pte)
mm: avoid data corruption on CoW fault into PFN-mapped VMA Jeff Moyer has reported that one of xfstests triggers a warning when run on DAX-enabled filesystem: WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50 ... wp_page_copy+0x98c/0xd50 (unreliable) do_wp_page+0xd8/0xad0 __handle_mm_fault+0x748/0x1b90 handle_mm_fault+0x120/0x1f0 __do_page_fault+0x240/0xd70 do_page_fault+0x38/0xd0 handle_page_fault+0x10/0x30 The warning happens on failed __copy_from_user_inatomic() which tries to copy data into a CoW page. This happens because of race between MADV_DONTNEED and CoW page fault: CPU0 CPU1 handle_mm_fault() do_wp_page() wp_page_copy() do_wp_page() madvise(MADV_DONTNEED) zap_page_range() zap_pte_range() ptep_get_and_clear_full() <TLB flush> __copy_from_user_inatomic() sees empty PTE and fails WARN_ON_ONCE(1) clear_page() The solution is to re-try __copy_from_user_inatomic() under PTL after checking that PTE is matches the orig_pte. The second copy attempt can still fail, like due to non-readable PTE, but there's nothing reasonable we can do about, except clearing the CoW page. Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Jeff Moyer <jmoyer@redhat.com> Cc: <stable@vger.kernel.org> Cc: Justin He <Justin.He@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/20200218154151.13349-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06 06:28:32 +00:00
goto warn;
/* Re-validate under PTL if the page is still mapped */
vmf->pte = pte_offset_map_lock(mm, vmf->pmd, addr, &vmf->ptl);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (unlikely(!vmf->pte || !pte_same(ptep_get(vmf->pte), vmf->orig_pte))) {
/* The PTE changed under us, update local tlb */
perf/core: allow pte_offset_map() to fail In rare transient cases, not yet made possible, pte_offset_map() and pte_offet_map_lock() may not find a page table: handle appropriately. [hughd@google.com: __wp_page_copy_user(): don't call update_mmu_tlb() with NULL] Link: https://lkml.kernel.org/r/1a4db221-7872-3594-57ce-42369945ec8d@google.com Link: https://lkml.kernel.org/r/a194441b-63f3-adb6-5964-7ca3171ae7c2@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:53:23 +00:00
if (vmf->pte)
update_mmu_tlb(vma, addr, vmf->pte);
mm, hwpoison: try to recover from copy-on write faults Patch series "Copy-on-write poison recovery", v3. Part 1 deals with the process that triggered the copy on write fault with a store to a shared read-only page. That process is send a SIGBUS with the usual machine check decoration to specify the virtual address of the lost page, together with the scope. Part 2 sets up to asynchronously take the page with the uncorrected error offline to prevent additional machine check faults. H/t to Miaohe Lin <linmiaohe@huawei.com> and Shuai Xue <xueshuai@linux.alibaba.com> for pointing me to the existing function to queue a call to memory_failure(). On x86 there is some duplicate reporting (because the error is also signalled by the memory controller as well as by the core that triggered the machine check). Console logs look like this: This patch (of 2): If the kernel is copying a page as the result of a copy-on-write fault and runs into an uncorrectable error, Linux will crash because it does not have recovery code for this case where poison is consumed by the kernel. It is easy to set up a test case. Just inject an error into a private page, fork(2), and have the child process write to the page. I wrapped that neatly into a test at: git://git.kernel.org/pub/scm/linux/kernel/git/aegl/ras-tools.git just enable ACPI error injection and run: # ./einj_mem-uc -f copy-on-write Add a new copy_user_highpage_mc() function that uses copy_mc_to_kernel() on architectures where that is available (currently x86 and powerpc). When an error is detected during the page copy, return VM_FAULT_HWPOISON to caller of wp_page_copy(). This propagates up the call stack. Both x86 and powerpc have code in their fault handler to deal with this code by sending a SIGBUS to the application. Note that this patch avoids a system crash and signals the process that triggered the copy-on-write action. It does not take any action for the memory error that is still in the shared page. To handle that a call to memory_failure() is needed. But this cannot be done from wp_page_copy() because it holds mmap_lock(). Perhaps the architecture fault handlers can deal with this loose end in a subsequent patch? On Intel/x86 this loose end will often be handled automatically because the memory controller provides an additional notification of the h/w poison in memory, the handler for this will call memory_failure(). This isn't a 100% solution. If there are multiple errors, not all may be logged in this way. [tony.luck@intel.com: add call to kmsan_unpoison_memory(), per Miaohe Lin] Link: https://lkml.kernel.org/r/20221031201029.102123-2-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-1-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-2-tony.luck@intel.com Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-21 20:01:19 +00:00
ret = -EAGAIN;
mm: avoid data corruption on CoW fault into PFN-mapped VMA Jeff Moyer has reported that one of xfstests triggers a warning when run on DAX-enabled filesystem: WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50 ... wp_page_copy+0x98c/0xd50 (unreliable) do_wp_page+0xd8/0xad0 __handle_mm_fault+0x748/0x1b90 handle_mm_fault+0x120/0x1f0 __do_page_fault+0x240/0xd70 do_page_fault+0x38/0xd0 handle_page_fault+0x10/0x30 The warning happens on failed __copy_from_user_inatomic() which tries to copy data into a CoW page. This happens because of race between MADV_DONTNEED and CoW page fault: CPU0 CPU1 handle_mm_fault() do_wp_page() wp_page_copy() do_wp_page() madvise(MADV_DONTNEED) zap_page_range() zap_pte_range() ptep_get_and_clear_full() <TLB flush> __copy_from_user_inatomic() sees empty PTE and fails WARN_ON_ONCE(1) clear_page() The solution is to re-try __copy_from_user_inatomic() under PTL after checking that PTE is matches the orig_pte. The second copy attempt can still fail, like due to non-readable PTE, but there's nothing reasonable we can do about, except clearing the CoW page. Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Jeff Moyer <jmoyer@redhat.com> Cc: <stable@vger.kernel.org> Cc: Justin He <Justin.He@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/20200218154151.13349-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06 06:28:32 +00:00
goto pte_unlock;
}
/*
* The same page can be mapped back since last copy attempt.
mm: avoid data corruption on CoW fault into PFN-mapped VMA Jeff Moyer has reported that one of xfstests triggers a warning when run on DAX-enabled filesystem: WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50 ... wp_page_copy+0x98c/0xd50 (unreliable) do_wp_page+0xd8/0xad0 __handle_mm_fault+0x748/0x1b90 handle_mm_fault+0x120/0x1f0 __do_page_fault+0x240/0xd70 do_page_fault+0x38/0xd0 handle_page_fault+0x10/0x30 The warning happens on failed __copy_from_user_inatomic() which tries to copy data into a CoW page. This happens because of race between MADV_DONTNEED and CoW page fault: CPU0 CPU1 handle_mm_fault() do_wp_page() wp_page_copy() do_wp_page() madvise(MADV_DONTNEED) zap_page_range() zap_pte_range() ptep_get_and_clear_full() <TLB flush> __copy_from_user_inatomic() sees empty PTE and fails WARN_ON_ONCE(1) clear_page() The solution is to re-try __copy_from_user_inatomic() under PTL after checking that PTE is matches the orig_pte. The second copy attempt can still fail, like due to non-readable PTE, but there's nothing reasonable we can do about, except clearing the CoW page. Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Jeff Moyer <jmoyer@redhat.com> Cc: <stable@vger.kernel.org> Cc: Justin He <Justin.He@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/20200218154151.13349-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06 06:28:32 +00:00
* Try to copy again under PTL.
*/
mm: avoid data corruption on CoW fault into PFN-mapped VMA Jeff Moyer has reported that one of xfstests triggers a warning when run on DAX-enabled filesystem: WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50 ... wp_page_copy+0x98c/0xd50 (unreliable) do_wp_page+0xd8/0xad0 __handle_mm_fault+0x748/0x1b90 handle_mm_fault+0x120/0x1f0 __do_page_fault+0x240/0xd70 do_page_fault+0x38/0xd0 handle_page_fault+0x10/0x30 The warning happens on failed __copy_from_user_inatomic() which tries to copy data into a CoW page. This happens because of race between MADV_DONTNEED and CoW page fault: CPU0 CPU1 handle_mm_fault() do_wp_page() wp_page_copy() do_wp_page() madvise(MADV_DONTNEED) zap_page_range() zap_pte_range() ptep_get_and_clear_full() <TLB flush> __copy_from_user_inatomic() sees empty PTE and fails WARN_ON_ONCE(1) clear_page() The solution is to re-try __copy_from_user_inatomic() under PTL after checking that PTE is matches the orig_pte. The second copy attempt can still fail, like due to non-readable PTE, but there's nothing reasonable we can do about, except clearing the CoW page. Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Jeff Moyer <jmoyer@redhat.com> Cc: <stable@vger.kernel.org> Cc: Justin He <Justin.He@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/20200218154151.13349-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06 06:28:32 +00:00
if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE)) {
/*
* Give a warn in case there can be some obscure
* use-case
*/
warn:
WARN_ON_ONCE(1);
clear_page(kaddr);
}
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
}
mm, hwpoison: try to recover from copy-on write faults Patch series "Copy-on-write poison recovery", v3. Part 1 deals with the process that triggered the copy on write fault with a store to a shared read-only page. That process is send a SIGBUS with the usual machine check decoration to specify the virtual address of the lost page, together with the scope. Part 2 sets up to asynchronously take the page with the uncorrected error offline to prevent additional machine check faults. H/t to Miaohe Lin <linmiaohe@huawei.com> and Shuai Xue <xueshuai@linux.alibaba.com> for pointing me to the existing function to queue a call to memory_failure(). On x86 there is some duplicate reporting (because the error is also signalled by the memory controller as well as by the core that triggered the machine check). Console logs look like this: This patch (of 2): If the kernel is copying a page as the result of a copy-on-write fault and runs into an uncorrectable error, Linux will crash because it does not have recovery code for this case where poison is consumed by the kernel. It is easy to set up a test case. Just inject an error into a private page, fork(2), and have the child process write to the page. I wrapped that neatly into a test at: git://git.kernel.org/pub/scm/linux/kernel/git/aegl/ras-tools.git just enable ACPI error injection and run: # ./einj_mem-uc -f copy-on-write Add a new copy_user_highpage_mc() function that uses copy_mc_to_kernel() on architectures where that is available (currently x86 and powerpc). When an error is detected during the page copy, return VM_FAULT_HWPOISON to caller of wp_page_copy(). This propagates up the call stack. Both x86 and powerpc have code in their fault handler to deal with this code by sending a SIGBUS to the application. Note that this patch avoids a system crash and signals the process that triggered the copy-on-write action. It does not take any action for the memory error that is still in the shared page. To handle that a call to memory_failure() is needed. But this cannot be done from wp_page_copy() because it holds mmap_lock(). Perhaps the architecture fault handlers can deal with this loose end in a subsequent patch? On Intel/x86 this loose end will often be handled automatically because the memory controller provides an additional notification of the h/w poison in memory, the handler for this will call memory_failure(). This isn't a 100% solution. If there are multiple errors, not all may be logged in this way. [tony.luck@intel.com: add call to kmsan_unpoison_memory(), per Miaohe Lin] Link: https://lkml.kernel.org/r/20221031201029.102123-2-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-1-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-2-tony.luck@intel.com Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-21 20:01:19 +00:00
ret = 0;
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
pte_unlock:
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (vmf->pte)
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
pte_unmap_unlock(vmf->pte, vmf->ptl);
pagefault_enable();
kunmap_local(kaddr);
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
flush_dcache_page(dst);
return ret;
}
mm: allow GFP_{FS,IO} for page_cache_read page cache allocation page_cache_read has been historically using page_cache_alloc_cold to allocate a new page. This means that mapping_gfp_mask is used as the base for the gfp_mask. Many filesystems are setting this mask to GFP_NOFS to prevent from fs recursion issues. page_cache_read is called from the vm_operations_struct::fault() context during the page fault. This context doesn't need the reclaim protection normally. ceph and ocfs2 which call filemap_fault from their fault handlers seem to be OK because they are not taking any fs lock before invoking generic implementation. xfs which takes XFS_MMAPLOCK_SHARED is safe from the reclaim recursion POV because this lock serializes truncate and punch hole with the page faults and it doesn't get involved in the reclaim. There is simply no reason to deliberately use a weaker allocation context when a __GFP_FS | __GFP_IO can be used. The GFP_NOFS protection might be even harmful. There is a push to fail GFP_NOFS allocations rather than loop within allocator indefinitely with a very limited reclaim ability. Once we start failing those requests the OOM killer might be triggered prematurely because the page cache allocation failure is propagated up the page fault path and end up in pagefault_out_of_memory. We cannot play with mapping_gfp_mask directly because that would be racy wrt. parallel page faults and it might interfere with other users who really rely on NOFS semantic from the stored gfp_mask. The mask is also inode proper so it would even be a layering violation. What we can do instead is to push the gfp_mask into struct vm_fault and allow fs layer to overwrite it should the callback need to be called with a different allocation context. Initialize the default to (mapping_gfp_mask | __GFP_FS | __GFP_IO) because this should be safe from the page fault path normally. Why do we care about mapping_gfp_mask at all then? Because this doesn't hold only reclaim protection flags but it also might contain zone and movability restrictions (GFP_DMA32, __GFP_MOVABLE and others) so we have to respect those. Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Jan Kara <jack@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 23:20:12 +00:00
static gfp_t __get_fault_gfp_mask(struct vm_area_struct *vma)
{
struct file *vm_file = vma->vm_file;
if (vm_file)
return mapping_gfp_mask(vm_file->f_mapping) | __GFP_FS | __GFP_IO;
/*
* Special mappings (e.g. VDSO) do not have any file so fake
* a default GFP_KERNEL for them.
*/
return GFP_KERNEL;
}
/*
* Notify the address space that the page is about to become writable so that
* it can prohibit this or wait for the page to get into an appropriate state.
*
* We do this without the lock held, so that it can sleep if it needs to.
*/
static vm_fault_t do_page_mkwrite(struct vm_fault *vmf, struct folio *folio)
{
vm_fault_t ret;
unsigned int old_flags = vmf->flags;
vmf->flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE;
if (vmf->vma->vm_file &&
IS_SWAPFILE(vmf->vma->vm_file->f_mapping->host))
return VM_FAULT_SIGBUS;
ret = vmf->vma->vm_ops->page_mkwrite(vmf);
/* Restore original flags so that caller is not surprised */
vmf->flags = old_flags;
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE)))
return ret;
if (unlikely(!(ret & VM_FAULT_LOCKED))) {
folio_lock(folio);
if (!folio->mapping) {
folio_unlock(folio);
return 0; /* retry */
}
ret |= VM_FAULT_LOCKED;
} else
VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio);
return ret;
}
/*
* Handle dirtying of a page in shared file mapping on a write fault.
*
* The function expects the page to be locked and unlocks it.
*/
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
static vm_fault_t fault_dirty_shared_page(struct vm_fault *vmf)
{
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
struct vm_area_struct *vma = vmf->vma;
struct address_space *mapping;
struct folio *folio = page_folio(vmf->page);
bool dirtied;
bool page_mkwrite = vma->vm_ops && vma->vm_ops->page_mkwrite;
dirtied = folio_mark_dirty(folio);
VM_BUG_ON_FOLIO(folio_test_anon(folio), folio);
/*
* Take a local copy of the address_space - folio.mapping may be zeroed
* by truncate after folio_unlock(). The address_space itself remains
* pinned by vma->vm_file's reference. We rely on folio_unlock()'s
* release semantics to prevent the compiler from undoing this copying.
*/
mapping = folio_raw_mapping(folio);
folio_unlock(folio);
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
if (!page_mkwrite)
file_update_time(vma->vm_file);
/*
* Throttle page dirtying rate down to writeback speed.
*
* mapping may be NULL here because some device drivers do not
* set page.mapping but still dirty their pages
*
* Drop the mmap_lock before waiting on IO, if we can. The file
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
* is pinning the mapping, as per above.
*/
if ((dirtied || page_mkwrite) && mapping) {
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
struct file *fpin;
fpin = maybe_unlock_mmap_for_io(vmf, NULL);
balance_dirty_pages_ratelimited(mapping);
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
if (fpin) {
fput(fpin);
mm: avoid unnecessary page fault retires on shared memory types I observed that for each of the shared file-backed page faults, we're very likely to retry one more time for the 1st write fault upon no page. It's because we'll need to release the mmap lock for dirty rate limit purpose with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()). Then after that throttling we return VM_FAULT_RETRY. We did that probably because VM_FAULT_RETRY is the only way we can return to the fault handler at that time telling it we've released the mmap lock. However that's not ideal because it's very likely the fault does not need to be retried at all since the pgtable was well installed before the throttling, so the next continuous fault (including taking mmap read lock, walk the pgtable, etc.) could be in most cases unnecessary. It's not only slowing down page faults for shared file-backed, but also add more mmap lock contention which is in most cases not needed at all. To observe this, one could try to write to some shmem page and look at "pgfault" value in /proc/vmstat, then we should expect 2 counts for each shmem write simply because we retried, and vm event "pgfault" will capture that. To make it more efficient, add a new VM_FAULT_COMPLETED return code just to show that we've completed the whole fault and released the lock. It's also a hint that we should very possibly not need another fault immediately on this page because we've just completed it. This patch provides a ~12% perf boost on my aarch64 test VM with a simple program sequentially dirtying 400MB shmem file being mmap()ed and these are the time it needs: Before: 650.980 ms (+-1.94%) After: 569.396 ms (+-1.38%) I believe it could help more than that. We need some special care on GUP and the s390 pgfault handler (for gmap code before returning from pgfault), the rest changes in the page fault handlers should be relatively straightforward. Another thing to mention is that mm_account_fault() does take this new fault as a generic fault to be accounted, unlike VM_FAULT_RETRY. I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping them as-is. Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vineet Gupta <vgupta@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part] Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Brian Cain <bcain@quicinc.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Weinberger <richard@nod.at> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Will Deacon <will@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Simek <monstr@monstr.eu> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: David Hildenbrand <david@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Chris Zankel <chris@zankel.net> Cc: Hugh Dickins <hughd@google.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Helge Deller <deller@gmx.de> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-30 18:34:50 +00:00
return VM_FAULT_COMPLETED;
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
}
}
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
return 0;
}
mm: refactor do_wp_page, extract the reuse case Currently do_wp_page contains 265 code lines. It also contains 9 goto statements, of which 5 are targeting labels which are not cleanup related. This makes the function extremely difficult to understand. The following patches are an attempt at breaking the function to its basic components, and making it easier to understand. The patches are straight forward function extractions from do_wp_page. As we extract functions, we remove unneeded parameters and simplify the code as much as possible. However, the functionality is supposed to remain completely unchanged. The patches also attempt to document the functionality of each extracted function. In patch 2, we split the unlock logic to the contain logic relevant to specific needs of each use case, instead of having huge number of conditional decisions in a single unlock flow. This patch (of 4): When do_wp_page is ending, in several cases it needs to reuse the existing page. This is achieved by making the page table writable, and possibly updating the page-cache state. Currently, this logic was "called" by using a goto jump. This makes following the control flow of the function harder. It is also against the coding style guidelines for using goto. As the code can easily be refactored into a specialized function, refactor it out and simplify the code flow in do_wp_page. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Haggai Eran <haggaie@mellanox.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Michel Lespinasse <walken@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 22:46:25 +00:00
/*
* Handle write page faults for pages that can be reused in the current vma
*
* This can happen either due to the mapping being with the VM_SHARED flag,
* or due to us being the last reference standing to the page. In either
* case, all we need to do here is to mark the page as writable and update
* any related book-keeping.
*/
static inline void wp_page_reuse(struct vm_fault *vmf, struct folio *folio)
__releases(vmf->ptl)
mm: refactor do_wp_page, extract the reuse case Currently do_wp_page contains 265 code lines. It also contains 9 goto statements, of which 5 are targeting labels which are not cleanup related. This makes the function extremely difficult to understand. The following patches are an attempt at breaking the function to its basic components, and making it easier to understand. The patches are straight forward function extractions from do_wp_page. As we extract functions, we remove unneeded parameters and simplify the code as much as possible. However, the functionality is supposed to remain completely unchanged. The patches also attempt to document the functionality of each extracted function. In patch 2, we split the unlock logic to the contain logic relevant to specific needs of each use case, instead of having huge number of conditional decisions in a single unlock flow. This patch (of 4): When do_wp_page is ending, in several cases it needs to reuse the existing page. This is achieved by making the page table writable, and possibly updating the page-cache state. Currently, this logic was "called" by using a goto jump. This makes following the control flow of the function harder. It is also against the coding style guidelines for using goto. As the code can easily be refactored into a specialized function, refactor it out and simplify the code flow in do_wp_page. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Haggai Eran <haggaie@mellanox.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Michel Lespinasse <walken@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 22:46:25 +00:00
{
struct vm_area_struct *vma = vmf->vma;
mm: refactor do_wp_page, extract the reuse case Currently do_wp_page contains 265 code lines. It also contains 9 goto statements, of which 5 are targeting labels which are not cleanup related. This makes the function extremely difficult to understand. The following patches are an attempt at breaking the function to its basic components, and making it easier to understand. The patches are straight forward function extractions from do_wp_page. As we extract functions, we remove unneeded parameters and simplify the code as much as possible. However, the functionality is supposed to remain completely unchanged. The patches also attempt to document the functionality of each extracted function. In patch 2, we split the unlock logic to the contain logic relevant to specific needs of each use case, instead of having huge number of conditional decisions in a single unlock flow. This patch (of 4): When do_wp_page is ending, in several cases it needs to reuse the existing page. This is achieved by making the page table writable, and possibly updating the page-cache state. Currently, this logic was "called" by using a goto jump. This makes following the control flow of the function harder. It is also against the coding style guidelines for using goto. As the code can easily be refactored into a specialized function, refactor it out and simplify the code flow in do_wp_page. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Haggai Eran <haggaie@mellanox.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Michel Lespinasse <walken@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 22:46:25 +00:00
pte_t entry;
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
VM_BUG_ON(!(vmf->flags & FAULT_FLAG_WRITE));
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed() For now we only get the (small) zeropage mapped to user space in four cases (excluding VM_PFNMAP mappings, such as /proc/vmstat): (1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON): do_anonymous_page() will not refcount it and map it pte_mkspecial() (2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem (MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and map it pte_mkspecial(). (3) KSM in mergeable VMA (anonymous VMA or COW mapping). cmp_and_merge_page() will not refcount it and map it pte_mkspecial(). (4) FSDAX as an optimization for holes. vmf_insert_mixed()->__vm_insert_mixed() might end up calling insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the zeropage and not mapping it pte_mkspecial(). With CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will not refcount it and map it pte_mkspecial(). In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax"). Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page() would currently return the zeropage. We'll refcount the zeropage when mapping and when unmapping. Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP, vm_normal_page() would currently refuse to return the zeropage. So we'd refcount it when mapping but not when unmapping it ... do we have fsdax without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell. Independent of that, we should never refcount the zeropage when we might be holding that reference for a long time, because even without an accounting imbalance we might overflow the refcount. As there is interest in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean support for that in the cases where it makes sense: (A) Never refcount the zeropage when mapping it: In insert_page(), special-case the zeropage, do not refcount it, and use pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page() looks cleaner than branching off to insert_pfn(). (B) Never refcount the zeropage when unmapping it: In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE() sanity check if we'd ever return the zeropage, which could happen if someone forgets to set pte_mkspecial() when mapping the zeropage. Document that. (C) Allow the zeropage only where reasonable s390x never wants the zeropage in some processes running legacy KVM guests that make use of storage keys. So disallow that. Further, using the zeropage in COW mappings is unproblematic (just what we do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it and GUP with FOLL_LONGTERM would work as expected. Similarly, mappings that can never have writable PTEs (implying no write faults) are also not problematic, because nothing could end up mapping the PTE writable by mistake later. But in case we could have writable PTEs, we'll only allow the zeropage in FSDAX VMAs, that are incompatible with GUP and are blocked there completely. We'll always require the zeropage to be mapped with pte_special(). GUP-fast will reject the zeropage that way, but GUP-slow will allow it. (Note that GUP does not refcount the zeropage with FOLL_PIN, because there were issues with overflowing the refcount in the past). Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to catch early during testing if we'd ever find a zeropage unexpectedly in code that wants to upgrade write permissions. Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale comment regarding reserved pages from insert_page(). Note that: * we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and vmf_insert_pfn() would allow the zeropage in some cases and not refcount it. * vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP mappings and we'll leave that alone for now. People can simply use one of the other interfaces. * we won't bother with the huge zeropage for now. It's never PTE-mapped and also GUP does not special-case it yet. Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-22 12:57:12 +00:00
VM_WARN_ON(is_zero_pfn(pte_pfn(vmf->orig_pte)));
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
if (folio) {
VM_BUG_ON(folio_test_anon(folio) &&
!PageAnonExclusive(vmf->page));
/*
* Clear the folio's cpupid information as the existing
* information potentially belongs to a now completely
* unrelated process.
*/
folio_xchg_last_cpupid(folio, (1 << LAST_CPUPID_SHIFT) - 1);
}
mm: refactor do_wp_page, extract the reuse case Currently do_wp_page contains 265 code lines. It also contains 9 goto statements, of which 5 are targeting labels which are not cleanup related. This makes the function extremely difficult to understand. The following patches are an attempt at breaking the function to its basic components, and making it easier to understand. The patches are straight forward function extractions from do_wp_page. As we extract functions, we remove unneeded parameters and simplify the code as much as possible. However, the functionality is supposed to remain completely unchanged. The patches also attempt to document the functionality of each extracted function. In patch 2, we split the unlock logic to the contain logic relevant to specific needs of each use case, instead of having huge number of conditional decisions in a single unlock flow. This patch (of 4): When do_wp_page is ending, in several cases it needs to reuse the existing page. This is achieved by making the page table writable, and possibly updating the page-cache state. Currently, this logic was "called" by using a goto jump. This makes following the control flow of the function harder. It is also against the coding style guidelines for using goto. As the code can easily be refactored into a specialized function, refactor it out and simplify the code flow in do_wp_page. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Haggai Eran <haggaie@mellanox.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Michel Lespinasse <walken@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 22:46:25 +00:00
flush_cache_page(vma, vmf->address, pte_pfn(vmf->orig_pte));
entry = pte_mkyoung(vmf->orig_pte);
mm: refactor do_wp_page, extract the reuse case Currently do_wp_page contains 265 code lines. It also contains 9 goto statements, of which 5 are targeting labels which are not cleanup related. This makes the function extremely difficult to understand. The following patches are an attempt at breaking the function to its basic components, and making it easier to understand. The patches are straight forward function extractions from do_wp_page. As we extract functions, we remove unneeded parameters and simplify the code as much as possible. However, the functionality is supposed to remain completely unchanged. The patches also attempt to document the functionality of each extracted function. In patch 2, we split the unlock logic to the contain logic relevant to specific needs of each use case, instead of having huge number of conditional decisions in a single unlock flow. This patch (of 4): When do_wp_page is ending, in several cases it needs to reuse the existing page. This is achieved by making the page table writable, and possibly updating the page-cache state. Currently, this logic was "called" by using a goto jump. This makes following the control flow of the function harder. It is also against the coding style guidelines for using goto. As the code can easily be refactored into a specialized function, refactor it out and simplify the code flow in do_wp_page. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Haggai Eran <haggaie@mellanox.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Michel Lespinasse <walken@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 22:46:25 +00:00
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
if (ptep_set_access_flags(vma, vmf->address, vmf->pte, entry, 1))
update_mmu_cache_range(vmf, vma, vmf->address, vmf->pte, 1);
pte_unmap_unlock(vmf->pte, vmf->ptl);
count_vm_event(PGREUSE);
mm: refactor do_wp_page, extract the reuse case Currently do_wp_page contains 265 code lines. It also contains 9 goto statements, of which 5 are targeting labels which are not cleanup related. This makes the function extremely difficult to understand. The following patches are an attempt at breaking the function to its basic components, and making it easier to understand. The patches are straight forward function extractions from do_wp_page. As we extract functions, we remove unneeded parameters and simplify the code as much as possible. However, the functionality is supposed to remain completely unchanged. The patches also attempt to document the functionality of each extracted function. In patch 2, we split the unlock logic to the contain logic relevant to specific needs of each use case, instead of having huge number of conditional decisions in a single unlock flow. This patch (of 4): When do_wp_page is ending, in several cases it needs to reuse the existing page. This is achieved by making the page table writable, and possibly updating the page-cache state. Currently, this logic was "called" by using a goto jump. This makes following the control flow of the function harder. It is also against the coding style guidelines for using goto. As the code can easily be refactored into a specialized function, refactor it out and simplify the code flow in do_wp_page. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Haggai Eran <haggaie@mellanox.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Michel Lespinasse <walken@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 22:46:25 +00:00
}
/*
* We could add a bitflag somewhere, but for now, we know that all
* vm_ops that have a ->map_pages have been audited and don't need
* the mmap_lock to be held.
*/
static inline vm_fault_t vmf_can_call_fault(const struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
if (vma->vm_ops->map_pages || !(vmf->flags & FAULT_FLAG_VMA_LOCK))
return 0;
vma_end_read(vma);
return VM_FAULT_RETRY;
}
/**
* vmf_anon_prepare - Prepare to handle an anonymous fault.
* @vmf: The vm_fault descriptor passed from the fault handler.
*
* When preparing to insert an anonymous page into a VMA from a
* fault handler, call this function rather than anon_vma_prepare().
* If this vma does not already have an associated anon_vma and we are
* only protected by the per-VMA lock, the caller must retry with the
* mmap_lock held. __anon_vma_prepare() will look at adjacent VMAs to
* determine if this VMA can share its anon_vma, and that's not safe to
* do with only the per-VMA lock held for this VMA.
*
* Return: 0 if fault handling can proceed. Any other value should be
* returned to the caller.
*/
mm/memory: change vmf_anon_prepare() to be non-static Patch series "Handle hugetlb faults under the VMA lock", v2. It is generally safe to handle hugetlb faults under the VMA lock. The only time this is unsafe is when no anon_vma has been allocated to this vma yet, so we can use vmf_anon_prepare() instead of anon_vma_prepare() to bailout if necessary. This should only happen for the first hugetlb page in the vma. Additionally, this patchset begins to use struct vm_fault within hugetlb_fault(). This works towards cleaning up hugetlb code, and should significantly reduce the number of arguments passed to functions. The last patch in this series may cause ltp hugemmap10 to "fail". This is because vmf_anon_prepare() may bailout with no anon_vma under the VMA lock after allocating a folio for the hugepage. In free_huge_folio(), this folio is completely freed on bailout iff there is a surplus of hugetlb pages. This will remove a folio off the freelist and decrement the number of hugepages while ltp expects these counters to remain unchanged on failure. The rest of the ltp testcases pass. This patch (of 2): In order to handle hugetlb faults under the VMA lock, hugetlb can use vmf_anon_prepare() to ensure we can safely prepare an anon_vma. Change it to be a non-static function so it can be used within hugetlb as well. Link: https://lkml.kernel.org/r/20240221234732.187629-6-vishal.moola@gmail.com Link: https://lkml.kernel.org/r/20240221234732.187629-2-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-21 23:47:28 +00:00
vm_fault_t vmf_anon_prepare(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
vm_fault_t ret = 0;
if (likely(vma->anon_vma))
return 0;
if (vmf->flags & FAULT_FLAG_VMA_LOCK) {
if (!mmap_read_trylock(vma->vm_mm)) {
vma_end_read(vma);
return VM_FAULT_RETRY;
}
}
if (__anon_vma_prepare(vma))
ret = VM_FAULT_OOM;
if (vmf->flags & FAULT_FLAG_VMA_LOCK)
mmap_read_unlock(vma->vm_mm);
return ret;
}
/*
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
* Handle the case of a page which we actually need to copy to a new page,
* either due to COW or unsharing.
*
* Called with mmap_lock locked and the old page referenced, but
* without the ptl held.
*
* High level logic flow:
*
* - Allocate a page, copy the content of the old page to the new one.
* - Handle book keeping and accounting - cgroups, mmu-notifiers, etc.
* - Take the PTL. If the pte changed, bail out and release the allocated page
* - If the pte is still the way we remember it, update the page table and all
* relevant references. This includes dropping the reference the page-table
* held to the old page, as well as updating the rmap.
* - In any case, unlock the PTL and drop the reference we took to the old page.
*/
static vm_fault_t wp_page_copy(struct vm_fault *vmf)
{
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
const bool unshare = vmf->flags & FAULT_FLAG_UNSHARE;
struct vm_area_struct *vma = vmf->vma;
struct mm_struct *mm = vma->vm_mm;
struct folio *old_folio = NULL;
struct folio *new_folio = NULL;
pte_t entry;
int page_copied = 0;
struct mmu_notifier_range range;
vm_fault_t ret;
bool pfn_is_zero;
delayacct: track delays from write-protect copy Delay accounting does not track the delay of write-protect copy. When tasks trigger many write-protect copys(include COW and unsharing of anonymous pages[1]), it may spend a amount of time waiting for them. To get the delay of tasks in write-protect copy, could help users to evaluate the impact of using KSM or fork() or GUP. Also update tools/accounting/getdelays.c: / # ./getdelays -dl -p 231 print delayacct stats ON listen forever PID 231 CPU count real total virtual total delay total delay average 6247 1859000000 2154070021 1674255063 0.268ms IO count delay total delay average 0 0 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 0 0 0ms COMPACT count delay total delay average 3 72758 0ms WPCOPY count delay total delay average 3635 271567604 0ms [1] commit 31cc5bc4af70("mm: support GUP-triggered unsharing of anonymous pages") Link: https://lkml.kernel.org/r/20220409014342.2505532-1-yang.yang29@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: wangyong <wang.yong12@zte.com.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 22:55:25 +00:00
delayacct_wpcopy_start();
if (vmf->page)
old_folio = page_folio(vmf->page);
ret = vmf_anon_prepare(vmf);
if (unlikely(ret))
goto out;
pfn_is_zero = is_zero_pfn(pte_pfn(vmf->orig_pte));
new_folio = folio_prealloc(mm, vma, vmf->address, pfn_is_zero);
if (!new_folio)
goto oom;
if (!pfn_is_zero) {
int err;
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
err = __wp_page_copy_user(&new_folio->page, vmf->page, vmf);
if (err) {
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
/*
* COW failed, if the fault was solved by other,
* it's fine. If not, userspace would re-fault on
* the same address and we will handle the fault
* from the second attempt.
mm, hwpoison: try to recover from copy-on write faults Patch series "Copy-on-write poison recovery", v3. Part 1 deals with the process that triggered the copy on write fault with a store to a shared read-only page. That process is send a SIGBUS with the usual machine check decoration to specify the virtual address of the lost page, together with the scope. Part 2 sets up to asynchronously take the page with the uncorrected error offline to prevent additional machine check faults. H/t to Miaohe Lin <linmiaohe@huawei.com> and Shuai Xue <xueshuai@linux.alibaba.com> for pointing me to the existing function to queue a call to memory_failure(). On x86 there is some duplicate reporting (because the error is also signalled by the memory controller as well as by the core that triggered the machine check). Console logs look like this: This patch (of 2): If the kernel is copying a page as the result of a copy-on-write fault and runs into an uncorrectable error, Linux will crash because it does not have recovery code for this case where poison is consumed by the kernel. It is easy to set up a test case. Just inject an error into a private page, fork(2), and have the child process write to the page. I wrapped that neatly into a test at: git://git.kernel.org/pub/scm/linux/kernel/git/aegl/ras-tools.git just enable ACPI error injection and run: # ./einj_mem-uc -f copy-on-write Add a new copy_user_highpage_mc() function that uses copy_mc_to_kernel() on architectures where that is available (currently x86 and powerpc). When an error is detected during the page copy, return VM_FAULT_HWPOISON to caller of wp_page_copy(). This propagates up the call stack. Both x86 and powerpc have code in their fault handler to deal with this code by sending a SIGBUS to the application. Note that this patch avoids a system crash and signals the process that triggered the copy-on-write action. It does not take any action for the memory error that is still in the shared page. To handle that a call to memory_failure() is needed. But this cannot be done from wp_page_copy() because it holds mmap_lock(). Perhaps the architecture fault handlers can deal with this loose end in a subsequent patch? On Intel/x86 this loose end will often be handled automatically because the memory controller provides an additional notification of the h/w poison in memory, the handler for this will call memory_failure(). This isn't a 100% solution. If there are multiple errors, not all may be logged in this way. [tony.luck@intel.com: add call to kmsan_unpoison_memory(), per Miaohe Lin] Link: https://lkml.kernel.org/r/20221031201029.102123-2-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-1-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-2-tony.luck@intel.com Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-21 20:01:19 +00:00
* The -EHWPOISON case will not be retried.
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
*/
folio_put(new_folio);
if (old_folio)
folio_put(old_folio);
delayacct: track delays from write-protect copy Delay accounting does not track the delay of write-protect copy. When tasks trigger many write-protect copys(include COW and unsharing of anonymous pages[1]), it may spend a amount of time waiting for them. To get the delay of tasks in write-protect copy, could help users to evaluate the impact of using KSM or fork() or GUP. Also update tools/accounting/getdelays.c: / # ./getdelays -dl -p 231 print delayacct stats ON listen forever PID 231 CPU count real total virtual total delay total delay average 6247 1859000000 2154070021 1674255063 0.268ms IO count delay total delay average 0 0 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 0 0 0ms COMPACT count delay total delay average 3 72758 0ms WPCOPY count delay total delay average 3635 271567604 0ms [1] commit 31cc5bc4af70("mm: support GUP-triggered unsharing of anonymous pages") Link: https://lkml.kernel.org/r/20220409014342.2505532-1-yang.yang29@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: wangyong <wang.yong12@zte.com.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 22:55:25 +00:00
delayacct_wpcopy_end();
return err == -EHWPOISON ? VM_FAULT_HWPOISON : 0;
mm: fix double page fault on arm64 if PTE_AF is cleared When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork Signed-off-by: Jia He <justin.he@arm.com> Reported-by: Yibo Cai <Yibo.Cai@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11 14:09:39 +00:00
}
kmsan_copy_page_meta(&new_folio->page, vmf->page);
}
__folio_mark_uptodate(new_folio);
mm, memcg: Try charging a page before setting page up to date Historically memcg overhead was high even if memcg was unused. This has improved a lot but it still showed up in a profile summary as being a problem. /usr/src/linux-4.0-vanilla/mm/memcontrol.c 6.6441 395842 mem_cgroup_try_charge 2.950% 175781 __mem_cgroup_count_vm_event 1.431% 85239 mem_cgroup_page_lruvec 0.456% 27156 mem_cgroup_commit_charge 0.392% 23342 uncharge_list 0.323% 19256 mem_cgroup_update_lru_size 0.278% 16538 memcg_check_events 0.216% 12858 mem_cgroup_charge_statistics.isra.22 0.188% 11172 try_charge 0.150% 8928 commit_charge 0.141% 8388 get_mem_cgroup_from_mm 0.121% 7184 That is showing that 6.64% of system CPU cycles were in memcontrol.c and dominated by mem_cgroup_try_charge. The annotation shows that the bulk of the cost was checking PageSwapCache which is expected to be cache hot but is very expensive. The problem appears to be that __SetPageUptodate is called just before the check which is a write barrier. It is required to make sure struct page and page data is written before the PTE is updated and the data visible to userspace. memcg charging does not require or need the barrier but gets unfairly hit with the cost so this patch attempts the charging before the barrier. Aside from the accidental cost to memcg there is the added benefit that the barrier is avoided if the page cannot be charged. When applied the relevant profile summary is as follows. /usr/src/linux-4.0-chargefirst-v2r1/mm/memcontrol.c 3.7907 223277 __mem_cgroup_count_vm_event 1.143% 67312 mem_cgroup_page_lruvec 0.465% 27403 mem_cgroup_commit_charge 0.381% 22452 uncharge_list 0.332% 19543 mem_cgroup_update_lru_size 0.284% 16704 get_mem_cgroup_from_mm 0.271% 15952 mem_cgroup_try_charge 0.237% 13982 memcg_check_events 0.222% 13058 mem_cgroup_charge_statistics.isra.22 0.185% 10920 commit_charge 0.140% 8235 try_charge 0.131% 7716 That brings the overhead down to 3.79% and leaves the memcg fault accounting to the root cgroup but it's an improvement. The difference in headline performance of the page fault microbench is marginal as memcg is such a small component of it. pft faults 4.0.0 4.0.0 vanilla chargefirst Hmean faults/cpu-1 1443258.1051 ( 0.00%) 1509075.7561 ( 4.56%) Hmean faults/cpu-3 1340385.9270 ( 0.00%) 1339160.7113 ( -0.09%) Hmean faults/cpu-5 875599.0222 ( 0.00%) 874174.1255 ( -0.16%) Hmean faults/cpu-7 601146.6726 ( 0.00%) 601370.9977 ( 0.04%) Hmean faults/cpu-8 510728.2754 ( 0.00%) 510598.8214 ( -0.03%) Hmean faults/sec-1 1432084.7845 ( 0.00%) 1497935.5274 ( 4.60%) Hmean faults/sec-3 3943818.1437 ( 0.00%) 3941920.1520 ( -0.05%) Hmean faults/sec-5 3877573.5867 ( 0.00%) 3869385.7553 ( -0.21%) Hmean faults/sec-7 3991832.0418 ( 0.00%) 3992181.4189 ( 0.01%) Hmean faults/sec-8 3987189.8167 ( 0.00%) 3986452.2204 ( -0.02%) It's only visible at single threaded. The overhead is there for higher threads but other factors dominate. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:57:27 +00:00
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, mm,
mm/mmu_notifier: contextual information for event triggering invalidation CPU page table update can happens for many reasons, not only as a result of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as a result of kernel activities (memory compression, reclaim, migration, ...). Users of mmu notifier API track changes to the CPU page table and take specific action for them. While current API only provide range of virtual address affected by the change, not why the changes is happening. This patchset do the initial mechanical convertion of all the places that calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP event as well as the vma if it is know (most invalidation happens against a given vma). Passing down the vma allows the users of mmu notifier to inspect the new vma page protection. The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier should assume that every for the range is going away when that event happens. A latter patch do convert mm call path to use a more appropriate events for each call. This is done as 2 patches so that no call site is forgotten especialy as it uses this following coccinelle patch: %<---------------------------------------------------------------------- @@ identifier I1, I2, I3, I4; @@ static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1, +enum mmu_notifier_event event, +unsigned flags, +struct vm_area_struct *vma, struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... } @@ @@ -#define mmu_notifier_range_init(range, mm, start, end) +#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end) @@ expression E1, E3, E4; identifier I1; @@ <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, I1, I1->vm_mm, E3, E4) ...> @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(..., struct vm_area_struct *VMA, ...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(...) { struct vm_area_struct *VMA; <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN; @@ FN(...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, NULL, E2, E3, E4) ...> } ---------------------------------------------------------------------->% Applied with: spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place spatch --sp-file mmu-notifier.spatch --dir mm --in-place Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:20:49 +00:00
vmf->address & PAGE_MASK,
(vmf->address & PAGE_MASK) + PAGE_SIZE);
mmu_notifier_invalidate_range_start(&range);
/*
* Re-check the pte - we dropped the lock
*/
vmf->pte = pte_offset_map_lock(mm, vmf->pmd, vmf->address, &vmf->ptl);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (likely(vmf->pte && pte_same(ptep_get(vmf->pte), vmf->orig_pte))) {
if (old_folio) {
if (!folio_test_anon(old_folio)) {
dec_mm_counter(mm, mm_counter_file(old_folio));
mm: convert mm's rss stats into percpu_counter Currently mm_struct maintains rss_stats which are updated on page fault and the unmapping codepaths. For page fault codepath the updates are cached per thread with the batch of TASK_RSS_EVENTS_THRESH which is 64. The reason for caching is performance for multithreaded applications otherwise the rss_stats updates may become hotspot for such applications. However this optimization comes with the cost of error margin in the rss stats. The rss_stats for applications with large number of threads can be very skewed. At worst the error margin is (nr_threads * 64) and we have a lot of applications with 100s of threads, so the error margin can be very high. Internally we had to reduce TASK_RSS_EVENTS_THRESH to 32. Recently we started seeing the unbounded errors for rss_stats for specific applications which use TCP rx0cp. It seems like vm_insert_pages() codepath does not sync rss_stats at all. This patch converts the rss_stats into percpu_counter to convert the error margin from (nr_threads * 64) to approximately (nr_cpus ^ 2). However this conversion enable us to get the accurate stats for situations where accuracy is more important than the cpu cost. This patch does not make such tradeoffs - we can just use percpu_counter_add_local() for the updates and percpu_counter_sum() (or percpu_counter_sync() + percpu_counter_read) for the readers. At the moment the readers are either procfs interface, oom_killer and memory reclaim which I think are not performance critical and should be ok with slow read. However I think we can make that change in a separate patch. Link: https://lkml.kernel.org/r/20221024052841.3291983-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 05:28:41 +00:00
inc_mm_counter(mm, MM_ANONPAGES);
}
} else {
ksm_might_unmap_zero_page(mm, vmf->orig_pte);
mm: convert mm's rss stats into percpu_counter Currently mm_struct maintains rss_stats which are updated on page fault and the unmapping codepaths. For page fault codepath the updates are cached per thread with the batch of TASK_RSS_EVENTS_THRESH which is 64. The reason for caching is performance for multithreaded applications otherwise the rss_stats updates may become hotspot for such applications. However this optimization comes with the cost of error margin in the rss stats. The rss_stats for applications with large number of threads can be very skewed. At worst the error margin is (nr_threads * 64) and we have a lot of applications with 100s of threads, so the error margin can be very high. Internally we had to reduce TASK_RSS_EVENTS_THRESH to 32. Recently we started seeing the unbounded errors for rss_stats for specific applications which use TCP rx0cp. It seems like vm_insert_pages() codepath does not sync rss_stats at all. This patch converts the rss_stats into percpu_counter to convert the error margin from (nr_threads * 64) to approximately (nr_cpus ^ 2). However this conversion enable us to get the accurate stats for situations where accuracy is more important than the cpu cost. This patch does not make such tradeoffs - we can just use percpu_counter_add_local() for the updates and percpu_counter_sum() (or percpu_counter_sync() + percpu_counter_read) for the readers. At the moment the readers are either procfs interface, oom_killer and memory reclaim which I think are not performance critical and should be ok with slow read. However I think we can make that change in a separate patch. Link: https://lkml.kernel.org/r/20221024052841.3291983-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 05:28:41 +00:00
inc_mm_counter(mm, MM_ANONPAGES);
}
flush_cache_page(vma, vmf->address, pte_pfn(vmf->orig_pte));
entry = mk_pte(&new_folio->page, vma->vm_page_prot);
entry = pte_sw_mkyoung(entry);
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
if (unlikely(unshare)) {
if (pte_soft_dirty(vmf->orig_pte))
entry = pte_mksoft_dirty(entry);
if (pte_uffd_wp(vmf->orig_pte))
entry = pte_mkuffd_wp(entry);
} else {
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
}
/*
* Clear the pte entry and flush it first, before updating the
* pte with the new entry, to keep TLBs on different CPUs in
* sync. This code used to set the new PTE then flush TLBs, but
* that left a window where the new PTE could be loaded into
* some TLBs while the old PTE remains in others.
*/
ptep_clear_flush(vma, vmf->address, vmf->pte);
mm: extend rmap flags arguments for folio_add_new_anon_rmap Patch series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()", v2. This patchset is preparatory work for mTHP swapin. folio_add_new_anon_rmap() assumes that new anon rmaps are always exclusive. However, this assumption doesn’t hold true for cases like do_swap_page(), where a new anon might be added to the swapcache and is not necessarily exclusive. The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to handle both exclusive and non-exclusive new anon folios. The do_swap_page() function is updated to use this extended API with rmap flags. Consequently, all new anon folios now consistently use folio_add_new_anon_rmap(). The special case for !folio_test_anon() in __folio_add_anon_rmap() can be safely removed. In conclusion, new anon folios always use folio_add_new_anon_rmap(), regardless of exclusivity. Old anon folios continue to use __folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and folio_add_anon_rmap_ptes(). This patch (of 3): In the case of a swap-in, a new anonymous folio is not necessarily exclusive. This patch updates the rmap flags to allow a new anonymous folio to be treated as either exclusive or non-exclusive. To maintain the existing behavior, we always use EXCLUSIVE as the default setting. [akpm@linux-foundation.org: cleanup and constifications per David and akpm] [v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()] Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com [v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap] Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: Shuai Yuan <yuanshuai@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-17 23:11:35 +00:00
folio_add_new_anon_rmap(new_folio, vma, vmf->address, RMAP_EXCLUSIVE);
folio_add_lru_vma(new_folio, vma);
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
BUG_ON(unshare && pte_write(entry));
set_pte_at(mm, vmf->address, vmf->pte, entry);
update_mmu_cache_range(vmf, vma, vmf->address, vmf->pte, 1);
if (old_folio) {
/*
* Only after switching the pte to the new page may
* we remove the mapcount here. Otherwise another
* process may come and find the rmap count decremented
* before the pte is switched to the new page, and
* "reuse" the old page writing into it while our pte
* here still points into it and can be read by other
* threads.
*
* The critical issue is to order this
* folio_remove_rmap_pte() with the ptp_clear_flush
* above. Those stores are ordered by (if nothing else,)
* the barrier present in the atomic_add_negative
* in folio_remove_rmap_pte();
*
* Then the TLB flush in ptep_clear_flush ensures that
* no process can access the old page before the
* decremented mapcount is visible. And the old page
* cannot be reused until after the decremented
* mapcount is visible. So transitively, TLBs to
* old page will be flushed before it can be reused.
*/
folio_remove_rmap_pte(old_folio, vmf->page, vma);
}
/* Free the old page.. */
new_folio = old_folio;
page_copied = 1;
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
pte_unmap_unlock(vmf->pte, vmf->ptl);
} else if (vmf->pte) {
update_mmu_tlb(vma, vmf->address, vmf->pte);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
pte_unmap_unlock(vmf->pte, vmf->ptl);
}
mmu_notifier_invalidate_range_end(&range);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (new_folio)
folio_put(new_folio);
if (old_folio) {
mm: free idle swap cache page after COW With commit 09854ba94c6a ("mm: do_wp_page() simplification"), after COW, the idle swap cache page (neither the page nor the corresponding swap entry is mapped by any process) will be left in the LRU list, even if it's in the active list or the head of the inactive list. So, the page reclaimer may take quite some overhead to reclaim these actually unused pages. To help the page reclaiming, in this patch, after COW, the idle swap cache page will be tried to be freed. To avoid to introduce much overhead to the hot COW code path, a) there's almost zero overhead for non-swap case via checking PageSwapCache() firstly. b) the page lock is acquired via trylock only. To test the patch, we used pmbench memory accessing benchmark with working-set larger than available memory on a 2-socket Intel server with a NVMe SSD as swap device. Test results shows that the pmbench score increases up to 23.8% with the decreased size of swap cache and swapin throughput. Link: https://lkml.kernel.org/r/20210601053143.1380078-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> [use free_swap_cache()] Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@surriel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:37:12 +00:00
if (page_copied)
free_swap_cache(old_folio);
folio_put(old_folio);
}
delayacct: track delays from write-protect copy Delay accounting does not track the delay of write-protect copy. When tasks trigger many write-protect copys(include COW and unsharing of anonymous pages[1]), it may spend a amount of time waiting for them. To get the delay of tasks in write-protect copy, could help users to evaluate the impact of using KSM or fork() or GUP. Also update tools/accounting/getdelays.c: / # ./getdelays -dl -p 231 print delayacct stats ON listen forever PID 231 CPU count real total virtual total delay total delay average 6247 1859000000 2154070021 1674255063 0.268ms IO count delay total delay average 0 0 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 0 0 0ms COMPACT count delay total delay average 3 72758 0ms WPCOPY count delay total delay average 3635 271567604 0ms [1] commit 31cc5bc4af70("mm: support GUP-triggered unsharing of anonymous pages") Link: https://lkml.kernel.org/r/20220409014342.2505532-1-yang.yang29@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: wangyong <wang.yong12@zte.com.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 22:55:25 +00:00
delayacct_wpcopy_end();
return 0;
oom:
ret = VM_FAULT_OOM;
out:
if (old_folio)
folio_put(old_folio);
delayacct: track delays from write-protect copy Delay accounting does not track the delay of write-protect copy. When tasks trigger many write-protect copys(include COW and unsharing of anonymous pages[1]), it may spend a amount of time waiting for them. To get the delay of tasks in write-protect copy, could help users to evaluate the impact of using KSM or fork() or GUP. Also update tools/accounting/getdelays.c: / # ./getdelays -dl -p 231 print delayacct stats ON listen forever PID 231 CPU count real total virtual total delay total delay average 6247 1859000000 2154070021 1674255063 0.268ms IO count delay total delay average 0 0 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 0 0 0ms COMPACT count delay total delay average 3 72758 0ms WPCOPY count delay total delay average 3635 271567604 0ms [1] commit 31cc5bc4af70("mm: support GUP-triggered unsharing of anonymous pages") Link: https://lkml.kernel.org/r/20220409014342.2505532-1-yang.yang29@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: wangyong <wang.yong12@zte.com.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 22:55:25 +00:00
delayacct_wpcopy_end();
return ret;
}
/**
* finish_mkwrite_fault - finish page fault for a shared mapping, making PTE
* writeable once the page is prepared
*
* @vmf: structure describing the fault
* @folio: the folio of vmf->page
*
* This function handles all that is needed to finish a write page fault in a
* shared mapping due to PTE being read-only once the mapped page is prepared.
* It handles locking of PTE and modifying it.
*
* The function expects the page to be locked or other protection against
* concurrent faults / writeback (such as DAX radix tree locks).
*
* Return: %0 on success, %VM_FAULT_NOPAGE when PTE got changed before
* we acquired PTE lock.
*/
static vm_fault_t finish_mkwrite_fault(struct vm_fault *vmf, struct folio *folio)
{
WARN_ON_ONCE(!(vmf->vma->vm_flags & VM_SHARED));
vmf->pte = pte_offset_map_lock(vmf->vma->vm_mm, vmf->pmd, vmf->address,
&vmf->ptl);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (!vmf->pte)
return VM_FAULT_NOPAGE;
/*
* We might have raced with another page fault while we released the
* pte_offset_map_lock.
*/
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (!pte_same(ptep_get(vmf->pte), vmf->orig_pte)) {
update_mmu_tlb(vmf->vma, vmf->address, vmf->pte);
pte_unmap_unlock(vmf->pte, vmf->ptl);
return VM_FAULT_NOPAGE;
}
wp_page_reuse(vmf, folio);
return 0;
}
mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to get notified when access is a write to a read-only PFN. This can happen if we mmap() a file then first mmap-read from it to page-in a read-only PFN, than we mmap-write to the same page. We need this functionality to fix a DAX bug, where in the scenario above we fail to set ctime/mtime though we modified the file. An xfstest is attached to this patchset that shows the failure and the fix. (A DAX patch will follow) This functionality is extra important for us, because upon dirtying of a pmem page we also want to RDMA the page to a remote cluster node. We define a new pfn_mkwrite and do not reuse page_mkwrite because 1 - The name ;-) 2 - But mainly because it would take a very long and tedious audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP users. To make sure they do not now CRASH. For example current DAX code (which this is for) would crash. If we would want to reuse page_mkwrite, We will need to first patch all users, so to not-crash-on-no-page. Then enable this patch. But even if I did that I would not sleep so well at night. Adding a new vector is the safest thing to do, and is not that expensive. an extra pointer at a static function vector per driver. Also the new vector is better for performance, because else we Will call all current Kernel vectors, so to: check-ha-no-page-do-nothing and return. No need to call it from do_shared_fault because do_wp_page is called to change pte permissions anyway. Signed-off-by: Yigal Korman <yigal@plexistor.com> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:11 +00:00
/*
* Handle write page faults for VM_MIXEDMAP or VM_PFNMAP for a VM_SHARED
* mapping
*/
static vm_fault_t wp_pfn_shared(struct vm_fault *vmf)
mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to get notified when access is a write to a read-only PFN. This can happen if we mmap() a file then first mmap-read from it to page-in a read-only PFN, than we mmap-write to the same page. We need this functionality to fix a DAX bug, where in the scenario above we fail to set ctime/mtime though we modified the file. An xfstest is attached to this patchset that shows the failure and the fix. (A DAX patch will follow) This functionality is extra important for us, because upon dirtying of a pmem page we also want to RDMA the page to a remote cluster node. We define a new pfn_mkwrite and do not reuse page_mkwrite because 1 - The name ;-) 2 - But mainly because it would take a very long and tedious audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP users. To make sure they do not now CRASH. For example current DAX code (which this is for) would crash. If we would want to reuse page_mkwrite, We will need to first patch all users, so to not-crash-on-no-page. Then enable this patch. But even if I did that I would not sleep so well at night. Adding a new vector is the safest thing to do, and is not that expensive. an extra pointer at a static function vector per driver. Also the new vector is better for performance, because else we Will call all current Kernel vectors, so to: check-ha-no-page-do-nothing and return. No need to call it from do_shared_fault because do_wp_page is called to change pte permissions anyway. Signed-off-by: Yigal Korman <yigal@plexistor.com> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:11 +00:00
{
struct vm_area_struct *vma = vmf->vma;
mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to get notified when access is a write to a read-only PFN. This can happen if we mmap() a file then first mmap-read from it to page-in a read-only PFN, than we mmap-write to the same page. We need this functionality to fix a DAX bug, where in the scenario above we fail to set ctime/mtime though we modified the file. An xfstest is attached to this patchset that shows the failure and the fix. (A DAX patch will follow) This functionality is extra important for us, because upon dirtying of a pmem page we also want to RDMA the page to a remote cluster node. We define a new pfn_mkwrite and do not reuse page_mkwrite because 1 - The name ;-) 2 - But mainly because it would take a very long and tedious audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP users. To make sure they do not now CRASH. For example current DAX code (which this is for) would crash. If we would want to reuse page_mkwrite, We will need to first patch all users, so to not-crash-on-no-page. Then enable this patch. But even if I did that I would not sleep so well at night. Adding a new vector is the safest thing to do, and is not that expensive. an extra pointer at a static function vector per driver. Also the new vector is better for performance, because else we Will call all current Kernel vectors, so to: check-ha-no-page-do-nothing and return. No need to call it from do_shared_fault because do_wp_page is called to change pte permissions anyway. Signed-off-by: Yigal Korman <yigal@plexistor.com> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:11 +00:00
if (vma->vm_ops && vma->vm_ops->pfn_mkwrite) {
vm_fault_t ret;
mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to get notified when access is a write to a read-only PFN. This can happen if we mmap() a file then first mmap-read from it to page-in a read-only PFN, than we mmap-write to the same page. We need this functionality to fix a DAX bug, where in the scenario above we fail to set ctime/mtime though we modified the file. An xfstest is attached to this patchset that shows the failure and the fix. (A DAX patch will follow) This functionality is extra important for us, because upon dirtying of a pmem page we also want to RDMA the page to a remote cluster node. We define a new pfn_mkwrite and do not reuse page_mkwrite because 1 - The name ;-) 2 - But mainly because it would take a very long and tedious audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP users. To make sure they do not now CRASH. For example current DAX code (which this is for) would crash. If we would want to reuse page_mkwrite, We will need to first patch all users, so to not-crash-on-no-page. Then enable this patch. But even if I did that I would not sleep so well at night. Adding a new vector is the safest thing to do, and is not that expensive. an extra pointer at a static function vector per driver. Also the new vector is better for performance, because else we Will call all current Kernel vectors, so to: check-ha-no-page-do-nothing and return. No need to call it from do_shared_fault because do_wp_page is called to change pte permissions anyway. Signed-off-by: Yigal Korman <yigal@plexistor.com> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:11 +00:00
pte_unmap_unlock(vmf->pte, vmf->ptl);
ret = vmf_can_call_fault(vmf);
if (ret)
return ret;
vmf->flags |= FAULT_FLAG_MKWRITE;
ret = vma->vm_ops->pfn_mkwrite(vmf);
if (ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE))
mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to get notified when access is a write to a read-only PFN. This can happen if we mmap() a file then first mmap-read from it to page-in a read-only PFN, than we mmap-write to the same page. We need this functionality to fix a DAX bug, where in the scenario above we fail to set ctime/mtime though we modified the file. An xfstest is attached to this patchset that shows the failure and the fix. (A DAX patch will follow) This functionality is extra important for us, because upon dirtying of a pmem page we also want to RDMA the page to a remote cluster node. We define a new pfn_mkwrite and do not reuse page_mkwrite because 1 - The name ;-) 2 - But mainly because it would take a very long and tedious audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP users. To make sure they do not now CRASH. For example current DAX code (which this is for) would crash. If we would want to reuse page_mkwrite, We will need to first patch all users, so to not-crash-on-no-page. Then enable this patch. But even if I did that I would not sleep so well at night. Adding a new vector is the safest thing to do, and is not that expensive. an extra pointer at a static function vector per driver. Also the new vector is better for performance, because else we Will call all current Kernel vectors, so to: check-ha-no-page-do-nothing and return. No need to call it from do_shared_fault because do_wp_page is called to change pte permissions anyway. Signed-off-by: Yigal Korman <yigal@plexistor.com> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:11 +00:00
return ret;
return finish_mkwrite_fault(vmf, NULL);
mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to get notified when access is a write to a read-only PFN. This can happen if we mmap() a file then first mmap-read from it to page-in a read-only PFN, than we mmap-write to the same page. We need this functionality to fix a DAX bug, where in the scenario above we fail to set ctime/mtime though we modified the file. An xfstest is attached to this patchset that shows the failure and the fix. (A DAX patch will follow) This functionality is extra important for us, because upon dirtying of a pmem page we also want to RDMA the page to a remote cluster node. We define a new pfn_mkwrite and do not reuse page_mkwrite because 1 - The name ;-) 2 - But mainly because it would take a very long and tedious audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP users. To make sure they do not now CRASH. For example current DAX code (which this is for) would crash. If we would want to reuse page_mkwrite, We will need to first patch all users, so to not-crash-on-no-page. Then enable this patch. But even if I did that I would not sleep so well at night. Adding a new vector is the safest thing to do, and is not that expensive. an extra pointer at a static function vector per driver. Also the new vector is better for performance, because else we Will call all current Kernel vectors, so to: check-ha-no-page-do-nothing and return. No need to call it from do_shared_fault because do_wp_page is called to change pte permissions anyway. Signed-off-by: Yigal Korman <yigal@plexistor.com> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:11 +00:00
}
wp_page_reuse(vmf, NULL);
return 0;
mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to get notified when access is a write to a read-only PFN. This can happen if we mmap() a file then first mmap-read from it to page-in a read-only PFN, than we mmap-write to the same page. We need this functionality to fix a DAX bug, where in the scenario above we fail to set ctime/mtime though we modified the file. An xfstest is attached to this patchset that shows the failure and the fix. (A DAX patch will follow) This functionality is extra important for us, because upon dirtying of a pmem page we also want to RDMA the page to a remote cluster node. We define a new pfn_mkwrite and do not reuse page_mkwrite because 1 - The name ;-) 2 - But mainly because it would take a very long and tedious audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP users. To make sure they do not now CRASH. For example current DAX code (which this is for) would crash. If we would want to reuse page_mkwrite, We will need to first patch all users, so to not-crash-on-no-page. Then enable this patch. But even if I did that I would not sleep so well at night. Adding a new vector is the safest thing to do, and is not that expensive. an extra pointer at a static function vector per driver. Also the new vector is better for performance, because else we Will call all current Kernel vectors, so to: check-ha-no-page-do-nothing and return. No need to call it from do_shared_fault because do_wp_page is called to change pte permissions anyway. Signed-off-by: Yigal Korman <yigal@plexistor.com> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:11 +00:00
}
static vm_fault_t wp_page_shared(struct vm_fault *vmf, struct folio *folio)
__releases(vmf->ptl)
{
struct vm_area_struct *vma = vmf->vma;
vm_fault_t ret = 0;
folio_get(folio);
if (vma->vm_ops && vma->vm_ops->page_mkwrite) {
vm_fault_t tmp;
pte_unmap_unlock(vmf->pte, vmf->ptl);
tmp = vmf_can_call_fault(vmf);
if (tmp) {
folio_put(folio);
return tmp;
}
tmp = do_page_mkwrite(vmf, folio);
if (unlikely(!tmp || (tmp &
(VM_FAULT_ERROR | VM_FAULT_NOPAGE)))) {
folio_put(folio);
return tmp;
}
tmp = finish_mkwrite_fault(vmf, folio);
if (unlikely(tmp & (VM_FAULT_ERROR | VM_FAULT_NOPAGE))) {
folio_unlock(folio);
folio_put(folio);
return tmp;
}
} else {
wp_page_reuse(vmf, folio);
folio_lock(folio);
}
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
ret |= fault_dirty_shared_page(vmf);
folio_put(folio);
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
return ret;
}
static bool wp_can_reuse_anon_folio(struct folio *folio,
struct vm_area_struct *vma)
{
mm: prohibit the last subpage from reusing the entire large folio In a Copy-on-Write (CoW) scenario, the last subpage will reuse the entire large folio, resulting in the waste of (nr_pages - 1) pages. This wasted memory remains allocated until it is either unmapped or memory reclamation occurs. The following small program can serve as evidence of this behavior main() { #define SIZE 1024 * 1024 * 1024UL void *p = malloc(SIZE); memset(p, 0x11, SIZE); if (fork() == 0) _exit(0); memset(p, 0x12, SIZE); printf("done\n"); while(1); } For example, using a 1024KiB mTHP by: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/enabled (1) w/o the patch, it takes 2GiB, Before running the test program, / # free -m total used free shared buff/cache available Mem: 5754 84 5692 0 17 5669 Swap: 0 0 0 / # /a.out & / # done After running the test program, / # free -m total used free shared buff/cache available Mem: 5754 2149 3627 0 19 3605 Swap: 0 0 0 (2) w/ the patch, it takes 1GiB only, Before running the test program, / # free -m total used free shared buff/cache available Mem: 5754 89 5687 0 17 5664 Swap: 0 0 0 / # /a.out & / # done After running the test program, / # free -m total used free shared buff/cache available Mem: 5754 1122 4655 0 17 4632 Swap: 0 0 0 This patch migrates the last subpage to a small folio and immediately returns the large folio to the system. It benefits both memory availability and anti-fragmentation. Link: https://lkml.kernel.org/r/20240308092721.144735-1-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Lance Yang <ioworker0@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-08 09:27:21 +00:00
/*
* We could currently only reuse a subpage of a large folio if no
* other subpages of the large folios are still mapped. However,
* let's just consistently not reuse subpages even if we could
* reuse in that scenario, and give back a large folio a bit
* sooner.
*/
if (folio_test_large(folio))
return false;
/*
* We have to verify under folio lock: these early checks are
* just an optimization to avoid locking the folio and freeing
* the swapcache if there is little hope that we can reuse.
*
* KSM doesn't necessarily raise the folio refcount.
*/
if (folio_test_ksm(folio) || folio_ref_count(folio) > 3)
return false;
if (!folio_test_lru(folio))
/*
* We cannot easily detect+handle references from
* remote LRU caches or references to LRU folios.
*/
lru_add_drain();
if (folio_ref_count(folio) > 1 + folio_test_swapcache(folio))
return false;
if (!folio_trylock(folio))
return false;
if (folio_test_swapcache(folio))
folio_free_swap(folio);
if (folio_test_ksm(folio) || folio_ref_count(folio) != 1) {
folio_unlock(folio);
return false;
}
/*
* Ok, we've got the only folio reference from our mapping
* and the folio is locked, it's dark out, and we're wearing
* sunglasses. Hit it.
*/
folio_move_anon_rmap(folio, vma);
folio_unlock(folio);
return true;
}
/*
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
* This routine handles present pages, when
* * users try to write to a shared page (FAULT_FLAG_WRITE)
* * GUP wants to take a R/O pin on a possibly shared anonymous page
* (FAULT_FLAG_UNSHARE)
*
* It is done by copying the page to a new address and decrementing the
* shared-page counter for the old page.
*
* Note that this routine assumes that the protection checks have been
* done by the caller (the low-level page fault routine in most cases).
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
* Thus, with FAULT_FLAG_WRITE, we can safely just mark it writable once we've
* done any necessary COW.
*
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
* In case of FAULT_FLAG_WRITE, we also mark the page dirty at this point even
* though the page will change only once the write actually happens. This
* avoids a few races, and potentially makes it more efficient.
*
* We enter with non-exclusive mmap_lock (to exclude vma changes,
* but allow concurrent faults), with pte both mapped and locked.
* We return with mmap_lock still held, but pte unmapped and unlocked.
*/
static vm_fault_t do_wp_page(struct vm_fault *vmf)
__releases(vmf->ptl)
{
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
const bool unshare = vmf->flags & FAULT_FLAG_UNSHARE;
struct vm_area_struct *vma = vmf->vma;
struct folio *folio = NULL;
userfaultfd: UFFD_FEATURE_WP_ASYNC Patch series "Implement IOCTL to get and optionally clear info about PTEs", v33. *Motivation* The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch() retrieves the addresses of the pages that are written to in a region of virtual memory. This syscall is used in Windows applications and games etc. This syscall is being emulated in pretty slow manner in userspace. Our purpose is to enhance the kernel such that we translate it efficiently in a better way. Currently some out of tree hack patches are being used to efficiently emulate it in some kernels. We intend to replace those with these patches. So the whole gaming on Linux can effectively get benefit from this. It means there would be tons of users of this code. CRIU use case [2] was mentioned by Andrei and Danylo: > Use cases for migrating sparse VMAs are binaries sanitized with ASAN, > MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of > shadow memory [4]. Being able to migrate such binaries allows to highly > reduce the amount of work needed to identify and fix post-migration > crashes, which happen constantly. Andrei defines the following uses of this code: * it is more granular and allows us to track changed pages more effectively. The current interface can clear dirty bits for the entire process only. In addition, reading info about pages is a separate operation. It means we must freeze the process to read information about all its pages, reset dirty bits, only then we can start dumping pages. The information about pages becomes more and more outdated, while we are processing pages. The new interface solves both these downsides. First, it allows us to read pte bits and clear the soft-dirty bit atomically. It means that CRIU will not need to freeze processes to pre-dump their memory. Second, it clears soft-dirty bits for a specified region of memory. It means CRIU will have actual info about pages to the moment of dumping them. * The new interface has to be much faster because basic page filtering is happening in the kernel. With the old interface, we have to read pagemap for each page. *Implementation Evolution (Short Summary)* From the definition of GetWriteWatch(), we feel like kernel's soft-dirty feature can be used under the hood with some additions like: * reset soft-dirty flag for only a specific region of memory instead of clearing the flag for the entire process * get and clear soft-dirty flag for a specific region atomically So we decided to use ioctl on pagemap file to read or/and reset soft-dirty flag. But using soft-dirty flag, sometimes we get extra pages which weren't even written. They had become soft-dirty because of VMA merging and VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were able to by-pass this short coming by ignoring VM_SOFTDIRTY until David reported that mprotect etc messes up the soft-dirty flag while ignoring VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We discussed if we can revert these patches. But we could not reach to any conclusion. So at this point, I made couple of tries to solve this whole VM_SOFTDIRTY issue by correcting the soft-dirty implementation: * [7] Correct the bug fixed wrongly back in 2014. It had potential to cause regression. We left it behind. * [8] Keep a list of soft-dirty part of a VMA across splits and merges. I got the reply don't increase the size of the VMA by 8 bytes. At this point, we left soft-dirty considering it is too much delicate and userfaultfd [9] seemed like the only way forward. From there onward, we have been basing soft-dirty emulation on userfaultfd wp feature where kernel resolves the faults itself when WP_ASYNC feature is used. It was straight forward to add WP_ASYNC feature in userfautlfd. Now we get only those pages dirty or written-to which are really written in reality. (PS There is another WP_UNPOPULATED userfautfd feature is required which is needed to avoid pre-faulting memory before write-protecting [9].) All the different masks were added on the request of CRIU devs to create interface more generic and better. [1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch [2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com [3] https://github.com/google/sanitizers [4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit [5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com [6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/ [7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com [8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com [9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com [10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com This patch (of 6): Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows userfaultfd wr-protect faults to be resolved by the kernel directly. It can be used like a high accuracy version of soft-dirty, without vma modifications during tracking, and also with ranged support by default rather than for a whole mm when reset the protections due to existence of ioctl(UFFDIO_WRITEPROTECT). Several goals of such a dirty tracking interface: 1. All types of memory should be supported and tracable. This is nature for soft-dirty but should mention when the context is userfaultfd, because it used to only support anon/shmem/hugetlb. The problem is for a dirty tracking purpose these three types may not be enough, and it's legal to track anything e.g. any page cache writes from mmap. 2. Protections can be applied to partial of a memory range, without vma split/merge fuss. The hope is that the tracking itself should not affect any vma layout change. It also helps when reset happens because the reset will not need mmap write lock which can block the tracee. 3. Accuracy needs to be maintained. This means we need pte markers to work on any type of VMA. One could question that, the whole concept of async dirty tracking is not really close to fundamentally what userfaultfd used to be: it's not "a fault to be serviced by userspace" anymore. However, using userfaultfd-wp here as a framework is convenient for us in at least: 1. VM_UFFD_WP vma flag, which has a very good name to suite something like this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new feature bit to identify from a sync version of uffd-wp registration. 2. PTE markers logic can be leveraged across the whole kernel to maintain the uffd-wp bit as long as an arch supports, this also applies to this case where uffd-wp bit will be a hint to dirty information and it will not go lost easily (e.g. when some page cache ptes got zapped). 3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or resetting a range of memory, while there's no counterpart in the old soft-dirty world, hence if this is wanted in a new design we'll need a new interface otherwise. We can somehow understand that commonality because uffd-wp was fundamentally a similar idea of write-protecting pages just like soft-dirty. This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also gives us chance to modify impl of WP_ASYNC just in case it could be not depending on WP_UNPOPULATED anymore in the future kernels. It's also fine to imply that because both features will rely on PTE_MARKER_UFFD_WP config option, so they'll show up together (or both missing) in an UFFDIO_API probe. vma_can_userfault() now allows any VMA if the userfaultfd registration is only about async uffd-wp. So we can track dirty for all kinds of memory including generic file systems (like XFS, EXT4 or BTRFS). One trick worth mention in do_wp_page() is that we need to manually update vmf->orig_pte here because it can be used later with a pte_same() check - this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags. The major defect of this approach of dirty tracking is we need to populate the pgtables when tracking starts. Soft-dirty doesn't do it like that. It's unwanted in the case where the range of memory to track is huge and unpopulated (e.g., tracking updates on a 10G file with mmap() on top, without having any page cache installed yet). One way to improve this is to allow pte markers exist for larger than PTE level for PMD+. That will not change the interface if to implemented, so we can leave that for later. Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com Signed-off-by: Peter Xu <peterx@redhat.com> Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrei Vagin <avagin@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Miroslaw <emmir@google.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Paul Gofman <pgofman@codeweavers.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yun Zhou <yun.zhou@windriver.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
pte_t pte;
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
if (likely(!unshare)) {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (userfaultfd_pte_wp(vma, ptep_get(vmf->pte))) {
userfaultfd: UFFD_FEATURE_WP_ASYNC Patch series "Implement IOCTL to get and optionally clear info about PTEs", v33. *Motivation* The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch() retrieves the addresses of the pages that are written to in a region of virtual memory. This syscall is used in Windows applications and games etc. This syscall is being emulated in pretty slow manner in userspace. Our purpose is to enhance the kernel such that we translate it efficiently in a better way. Currently some out of tree hack patches are being used to efficiently emulate it in some kernels. We intend to replace those with these patches. So the whole gaming on Linux can effectively get benefit from this. It means there would be tons of users of this code. CRIU use case [2] was mentioned by Andrei and Danylo: > Use cases for migrating sparse VMAs are binaries sanitized with ASAN, > MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of > shadow memory [4]. Being able to migrate such binaries allows to highly > reduce the amount of work needed to identify and fix post-migration > crashes, which happen constantly. Andrei defines the following uses of this code: * it is more granular and allows us to track changed pages more effectively. The current interface can clear dirty bits for the entire process only. In addition, reading info about pages is a separate operation. It means we must freeze the process to read information about all its pages, reset dirty bits, only then we can start dumping pages. The information about pages becomes more and more outdated, while we are processing pages. The new interface solves both these downsides. First, it allows us to read pte bits and clear the soft-dirty bit atomically. It means that CRIU will not need to freeze processes to pre-dump their memory. Second, it clears soft-dirty bits for a specified region of memory. It means CRIU will have actual info about pages to the moment of dumping them. * The new interface has to be much faster because basic page filtering is happening in the kernel. With the old interface, we have to read pagemap for each page. *Implementation Evolution (Short Summary)* From the definition of GetWriteWatch(), we feel like kernel's soft-dirty feature can be used under the hood with some additions like: * reset soft-dirty flag for only a specific region of memory instead of clearing the flag for the entire process * get and clear soft-dirty flag for a specific region atomically So we decided to use ioctl on pagemap file to read or/and reset soft-dirty flag. But using soft-dirty flag, sometimes we get extra pages which weren't even written. They had become soft-dirty because of VMA merging and VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were able to by-pass this short coming by ignoring VM_SOFTDIRTY until David reported that mprotect etc messes up the soft-dirty flag while ignoring VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We discussed if we can revert these patches. But we could not reach to any conclusion. So at this point, I made couple of tries to solve this whole VM_SOFTDIRTY issue by correcting the soft-dirty implementation: * [7] Correct the bug fixed wrongly back in 2014. It had potential to cause regression. We left it behind. * [8] Keep a list of soft-dirty part of a VMA across splits and merges. I got the reply don't increase the size of the VMA by 8 bytes. At this point, we left soft-dirty considering it is too much delicate and userfaultfd [9] seemed like the only way forward. From there onward, we have been basing soft-dirty emulation on userfaultfd wp feature where kernel resolves the faults itself when WP_ASYNC feature is used. It was straight forward to add WP_ASYNC feature in userfautlfd. Now we get only those pages dirty or written-to which are really written in reality. (PS There is another WP_UNPOPULATED userfautfd feature is required which is needed to avoid pre-faulting memory before write-protecting [9].) All the different masks were added on the request of CRIU devs to create interface more generic and better. [1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch [2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com [3] https://github.com/google/sanitizers [4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit [5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com [6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/ [7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com [8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com [9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com [10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com This patch (of 6): Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows userfaultfd wr-protect faults to be resolved by the kernel directly. It can be used like a high accuracy version of soft-dirty, without vma modifications during tracking, and also with ranged support by default rather than for a whole mm when reset the protections due to existence of ioctl(UFFDIO_WRITEPROTECT). Several goals of such a dirty tracking interface: 1. All types of memory should be supported and tracable. This is nature for soft-dirty but should mention when the context is userfaultfd, because it used to only support anon/shmem/hugetlb. The problem is for a dirty tracking purpose these three types may not be enough, and it's legal to track anything e.g. any page cache writes from mmap. 2. Protections can be applied to partial of a memory range, without vma split/merge fuss. The hope is that the tracking itself should not affect any vma layout change. It also helps when reset happens because the reset will not need mmap write lock which can block the tracee. 3. Accuracy needs to be maintained. This means we need pte markers to work on any type of VMA. One could question that, the whole concept of async dirty tracking is not really close to fundamentally what userfaultfd used to be: it's not "a fault to be serviced by userspace" anymore. However, using userfaultfd-wp here as a framework is convenient for us in at least: 1. VM_UFFD_WP vma flag, which has a very good name to suite something like this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new feature bit to identify from a sync version of uffd-wp registration. 2. PTE markers logic can be leveraged across the whole kernel to maintain the uffd-wp bit as long as an arch supports, this also applies to this case where uffd-wp bit will be a hint to dirty information and it will not go lost easily (e.g. when some page cache ptes got zapped). 3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or resetting a range of memory, while there's no counterpart in the old soft-dirty world, hence if this is wanted in a new design we'll need a new interface otherwise. We can somehow understand that commonality because uffd-wp was fundamentally a similar idea of write-protecting pages just like soft-dirty. This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also gives us chance to modify impl of WP_ASYNC just in case it could be not depending on WP_UNPOPULATED anymore in the future kernels. It's also fine to imply that because both features will rely on PTE_MARKER_UFFD_WP config option, so they'll show up together (or both missing) in an UFFDIO_API probe. vma_can_userfault() now allows any VMA if the userfaultfd registration is only about async uffd-wp. So we can track dirty for all kinds of memory including generic file systems (like XFS, EXT4 or BTRFS). One trick worth mention in do_wp_page() is that we need to manually update vmf->orig_pte here because it can be used later with a pte_same() check - this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags. The major defect of this approach of dirty tracking is we need to populate the pgtables when tracking starts. Soft-dirty doesn't do it like that. It's unwanted in the case where the range of memory to track is huge and unpopulated (e.g., tracking updates on a 10G file with mmap() on top, without having any page cache installed yet). One way to improve this is to allow pte markers exist for larger than PTE level for PMD+. That will not change the interface if to implemented, so we can leave that for later. Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com Signed-off-by: Peter Xu <peterx@redhat.com> Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrei Vagin <avagin@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Miroslaw <emmir@google.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Paul Gofman <pgofman@codeweavers.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yun Zhou <yun.zhou@windriver.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
if (!userfaultfd_wp_async(vma)) {
pte_unmap_unlock(vmf->pte, vmf->ptl);
return handle_userfault(vmf, VM_UFFD_WP);
}
/*
* Nothing needed (cache flush, TLB invalidations,
* etc.) because we're only removing the uffd-wp bit,
* which is completely invisible to the user.
*/
pte = pte_clear_uffd_wp(ptep_get(vmf->pte));
set_pte_at(vma->vm_mm, vmf->address, vmf->pte, pte);
/*
* Update this to be prepared for following up CoW
* handling
*/
vmf->orig_pte = pte;
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
}
/*
* Userfaultfd write-protect can defer flushes. Ensure the TLB
* is flushed in this case before copying.
*/
if (unlikely(userfaultfd_wp(vmf->vma) &&
mm_tlb_flush_pending(vmf->vma->vm_mm)))
flush_tlb_page(vmf->vma, vmf->address);
}
mm/userfaultfd: fix memory corruption due to writeprotect Userfaultfd self-test fails occasionally, indicating a memory corruption. Analyzing this problem indicates that there is a real bug since mmap_lock is only taken for read in mwriteprotect_range() and defers flushes, and since there is insufficient consideration of concurrent deferred TLB flushes in wp_page_copy(). Although the PTE is flushed from the TLBs in wp_page_copy(), this flush takes place after the copy has already been performed, and therefore changes of the page are possible between the time of the copy and the time in which the PTE is flushed. To make matters worse, memory-unprotection using userfaultfd also poses a problem. Although memory unprotection is logically a promotion of PTE permissions, and therefore should not require a TLB flush, the current userrfaultfd code might actually cause a demotion of the architectural PTE permission: when userfaultfd_writeprotect() unprotects memory region, it unintentionally *clears* the RW-bit if it was already set. Note that this unprotecting a PTE that is not write-protected is a valid use-case: the userfaultfd monitor might ask to unprotect a region that holds both write-protected and write-unprotected PTEs. The scenario that happens in selftests/vm/userfaultfd is as follows: cpu0 cpu1 cpu2 ---- ---- ---- [ Writable PTE cached in TLB ] userfaultfd_writeprotect() [ write-*unprotect* ] mwriteprotect_range() mmap_read_lock() change_protection() change_protection_range() ... change_pte_range() [ *clear* “write”-bit ] [ defer TLB flushes ] [ page-fault ] ... wp_page_copy() cow_user_page() [ copy page ] [ write to old page ] ... set_pte_at_notify() A similar scenario can happen: cpu0 cpu1 cpu2 cpu3 ---- ---- ---- ---- [ Writable PTE cached in TLB ] userfaultfd_writeprotect() [ write-protect ] [ deferred TLB flush ] userfaultfd_writeprotect() [ write-unprotect ] [ deferred TLB flush] [ page-fault ] wp_page_copy() cow_user_page() [ copy page ] ... [ write to page ] set_pte_at_notify() This race exists since commit 292924b26024 ("userfaultfd: wp: apply _PAGE_UFFD_WP bit"). Yet, as Yu Zhao pointed, these races became apparent since commit 09854ba94c6a ("mm: do_wp_page() simplification") which made wp_page_copy() more likely to take place, specifically if page_count(page) > 1. To resolve the aforementioned races, check whether there are pending flushes on uffd-write-protected VMAs, and if there are, perform a flush before doing the COW. Further optimizations will follow to avoid during uffd-write-unprotect unnecassary PTE write-protection and TLB flushes. Link: https://lkml.kernel.org/r/20210304095423.3825684-1-namit@vmware.com Fixes: 09854ba94c6a ("mm: do_wp_page() simplification") Signed-off-by: Nadav Amit <namit@vmware.com> Suggested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-13 05:08:17 +00:00
vmf->page = vm_normal_page(vma, vmf->address, vmf->orig_pte);
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
if (vmf->page)
folio = page_folio(vmf->page);
/*
* Shared mapping: we are guaranteed to have VM_WRITE and
* FAULT_FLAG_WRITE set at this point.
*/
if (vma->vm_flags & (VM_SHARED | VM_MAYSHARE)) {
mm: dirty page accounting vs VM_MIXEDMAP Dirty page accounting accurately measures the amound of dirty pages in writable shared mappings by mapping the pages RO (as indicated by vma_wants_writenotify). We then trap on first write and call set_page_dirty() on the page, after which we map the page RW and continue execution. When we launder dirty pages, we call clear_page_dirty_for_io() which clears both the dirty flag, and maps the page RO again before we start writeout so that the story can repeat itself. vma_wants_writenotify() excludes VM_PFNMAP on the basis that we cannot do the regular dirty page stuff on raw PFNs and the memory isn't going anywhere anyway. The recently introduced VM_MIXEDMAP mixes both !pfn_valid() and pfn_valid() pages in a single mapping. We can't do dirty page accounting on !pfn_valid() pages as stated above, and mapping them RO causes them to be COW'ed on write, which breaks VM_SHARED semantics. Excluding VM_MIXEDMAP in vma_wants_writenotify() would mean we don't do the regular dirty page accounting for the pfn_valid() pages, which would bring back all the head-aches from inaccurate dirty page accounting. So instead, we let the !pfn_valid() pages get mapped RO, but fix them up unconditionally in the fault path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: "Jared Hulbert" <jaredeh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 16:59:24 +00:00
/*
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared For VMAs that don't want write notifications, PTEs created for read faults have their write bit set. If the read fault happens after VM_SOFTDIRTY is cleared, then the PTE's softdirty bit will remain clear after subsequent writes. Here's a simple code snippet to demonstrate the bug: char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_SHARED, -1, 0); system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */ assert(*m == '\0'); /* new PTE allows write access */ assert(!soft_dirty(x)); *m = 'x'; /* should dirty the page */ assert(soft_dirty(x)); /* fails */ With this patch, write notifications are enabled when VM_SOFTDIRTY is cleared. Furthermore, to avoid unnecessary faults, write notifications are disabled when VM_SOFTDIRTY is set. As a side effect of enabling and disabling write notifications with care, this patch fixes a bug in mprotect where vm_page_prot bits set by drivers were zapped on mprotect. An analogous bug was fixed in mmap by commit c9d0bf241451 ("mm: uncached vma support with writenotify"). Signed-off-by: Peter Feiner <pfeiner@google.com> Reported-by: Peter Feiner <pfeiner@google.com> Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Jamie Liu <jamieliu@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13 22:55:46 +00:00
* VM_MIXEDMAP !pfn_valid() case, or VM_SOFTDIRTY clear on a
* VM_PFNMAP VMA.
mm: dirty page accounting vs VM_MIXEDMAP Dirty page accounting accurately measures the amound of dirty pages in writable shared mappings by mapping the pages RO (as indicated by vma_wants_writenotify). We then trap on first write and call set_page_dirty() on the page, after which we map the page RW and continue execution. When we launder dirty pages, we call clear_page_dirty_for_io() which clears both the dirty flag, and maps the page RO again before we start writeout so that the story can repeat itself. vma_wants_writenotify() excludes VM_PFNMAP on the basis that we cannot do the regular dirty page stuff on raw PFNs and the memory isn't going anywhere anyway. The recently introduced VM_MIXEDMAP mixes both !pfn_valid() and pfn_valid() pages in a single mapping. We can't do dirty page accounting on !pfn_valid() pages as stated above, and mapping them RO causes them to be COW'ed on write, which breaks VM_SHARED semantics. Excluding VM_MIXEDMAP in vma_wants_writenotify() would mean we don't do the regular dirty page accounting for the pfn_valid() pages, which would bring back all the head-aches from inaccurate dirty page accounting. So instead, we let the !pfn_valid() pages get mapped RO, but fix them up unconditionally in the fault path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: "Jared Hulbert" <jaredeh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 16:59:24 +00:00
*
* We should not cow pages in a shared writeable mapping.
mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to get notified when access is a write to a read-only PFN. This can happen if we mmap() a file then first mmap-read from it to page-in a read-only PFN, than we mmap-write to the same page. We need this functionality to fix a DAX bug, where in the scenario above we fail to set ctime/mtime though we modified the file. An xfstest is attached to this patchset that shows the failure and the fix. (A DAX patch will follow) This functionality is extra important for us, because upon dirtying of a pmem page we also want to RDMA the page to a remote cluster node. We define a new pfn_mkwrite and do not reuse page_mkwrite because 1 - The name ;-) 2 - But mainly because it would take a very long and tedious audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP users. To make sure they do not now CRASH. For example current DAX code (which this is for) would crash. If we would want to reuse page_mkwrite, We will need to first patch all users, so to not-crash-on-no-page. Then enable this patch. But even if I did that I would not sleep so well at night. Adding a new vector is the safest thing to do, and is not that expensive. an extra pointer at a static function vector per driver. Also the new vector is better for performance, because else we Will call all current Kernel vectors, so to: check-ha-no-page-do-nothing and return. No need to call it from do_shared_fault because do_wp_page is called to change pte permissions anyway. Signed-off-by: Yigal Korman <yigal@plexistor.com> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:15:11 +00:00
* Just mark the pages writable and/or call ops->pfn_mkwrite.
mm: dirty page accounting vs VM_MIXEDMAP Dirty page accounting accurately measures the amound of dirty pages in writable shared mappings by mapping the pages RO (as indicated by vma_wants_writenotify). We then trap on first write and call set_page_dirty() on the page, after which we map the page RW and continue execution. When we launder dirty pages, we call clear_page_dirty_for_io() which clears both the dirty flag, and maps the page RO again before we start writeout so that the story can repeat itself. vma_wants_writenotify() excludes VM_PFNMAP on the basis that we cannot do the regular dirty page stuff on raw PFNs and the memory isn't going anywhere anyway. The recently introduced VM_MIXEDMAP mixes both !pfn_valid() and pfn_valid() pages in a single mapping. We can't do dirty page accounting on !pfn_valid() pages as stated above, and mapping them RO causes them to be COW'ed on write, which breaks VM_SHARED semantics. Excluding VM_MIXEDMAP in vma_wants_writenotify() would mean we don't do the regular dirty page accounting for the pfn_valid() pages, which would bring back all the head-aches from inaccurate dirty page accounting. So instead, we let the !pfn_valid() pages get mapped RO, but fix them up unconditionally in the fault path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: "Jared Hulbert" <jaredeh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 16:59:24 +00:00
*/
if (!vmf->page)
return wp_pfn_shared(vmf);
return wp_page_shared(vmf, folio);
mm: dirty page accounting vs VM_MIXEDMAP Dirty page accounting accurately measures the amound of dirty pages in writable shared mappings by mapping the pages RO (as indicated by vma_wants_writenotify). We then trap on first write and call set_page_dirty() on the page, after which we map the page RW and continue execution. When we launder dirty pages, we call clear_page_dirty_for_io() which clears both the dirty flag, and maps the page RO again before we start writeout so that the story can repeat itself. vma_wants_writenotify() excludes VM_PFNMAP on the basis that we cannot do the regular dirty page stuff on raw PFNs and the memory isn't going anywhere anyway. The recently introduced VM_MIXEDMAP mixes both !pfn_valid() and pfn_valid() pages in a single mapping. We can't do dirty page accounting on !pfn_valid() pages as stated above, and mapping them RO causes them to be COW'ed on write, which breaks VM_SHARED semantics. Excluding VM_MIXEDMAP in vma_wants_writenotify() would mean we don't do the regular dirty page accounting for the pfn_valid() pages, which would bring back all the head-aches from inaccurate dirty page accounting. So instead, we let the !pfn_valid() pages get mapped RO, but fix them up unconditionally in the fault path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: "Jared Hulbert" <jaredeh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 16:59:24 +00:00
}
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
/*
* Private mapping: create an exclusive anonymous page copy if reuse
* is impossible. We might miss VM_WRITE for FOLL_FORCE handling.
*
* If we encounter a page that is marked exclusive, we must reuse
* the page without further checks.
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
*/
if (folio && folio_test_anon(folio) &&
(PageAnonExclusive(vmf->page) || wp_can_reuse_anon_folio(folio, vma))) {
if (!PageAnonExclusive(vmf->page))
SetPageAnonExclusive(vmf->page);
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
if (unlikely(unshare)) {
pte_unmap_unlock(vmf->pte, vmf->ptl);
return 0;
}
wp_page_reuse(vmf, folio);
return 0;
}
/*
* Ok, we need to copy. Oh, well..
*/
if (folio)
folio_get(folio);
pte_unmap_unlock(vmf->pte, vmf->ptl);
#ifdef CONFIG_KSM
if (folio && folio_test_ksm(folio))
count_vm_event(COW_KSM);
#endif
return wp_page_copy(vmf);
}
static void unmap_mapping_range_vma(struct vm_area_struct *vma,
unsigned long start_addr, unsigned long end_addr,
struct zap_details *details)
{
zap_page_range_single(vma, start_addr, end_addr - start_addr, details);
}
static inline void unmap_mapping_range_tree(struct rb_root_cached *root,
pgoff_t first_index,
pgoff_t last_index,
struct zap_details *details)
{
struct vm_area_struct *vma;
pgoff_t vba, vea, zba, zea;
vma_interval_tree_foreach(vma, root, first_index, last_index) {
vba = vma->vm_pgoff;
vea = vba + vma_pages(vma) - 1;
zba = max(first_index, vba);
zea = min(last_index, vea);
unmap_mapping_range_vma(vma,
((zba - vba) << PAGE_SHIFT) + vma->vm_start,
((zea - vba + 1) << PAGE_SHIFT) + vma->vm_start,
details);
}
}
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
/**
* unmap_mapping_folio() - Unmap single folio from processes.
* @folio: The locked folio to be unmapped.
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
*
* Unmap this folio from any userspace process which still has it mmaped.
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
* Typically, for efficiency, the range of nearby pages has already been
* unmapped by unmap_mapping_pages() or unmap_mapping_range(). But once
* truncation or invalidation holds the lock on a folio, it may find that
* the page has been remapped again: and then uses unmap_mapping_folio()
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
* to unmap it finally.
*/
void unmap_mapping_folio(struct folio *folio)
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
{
struct address_space *mapping = folio->mapping;
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
struct zap_details details = { };
pgoff_t first_index;
pgoff_t last_index;
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
VM_BUG_ON(!folio_test_locked(folio));
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
first_index = folio->index;
last_index = folio_next_index(folio) - 1;
mm: change zap_details.zap_mapping into even_cows Currently we have a zap_mapping pointer maintained in zap_details, when it is specified we only want to zap the pages that has the same mapping with what the caller has specified. But what we want to do is actually simpler: we want to skip zapping private (COW-ed) pages in some cases. We can refer to unmap_mapping_pages() callers where we could have passed in different even_cows values. The other user is unmap_mapping_folio() where we always want to skip private pages. According to Hugh, we used a mapping pointer for historical reason, as explained here: https://lore.kernel.org/lkml/391aa58d-ce84-9d4-d68d-d98a9c533255@google.com/ Quoting partly from Hugh: Which raises the question again of why I did not just use a boolean flag there originally: aah, I think I've found why. In those days there was a horrible "optimization", for better performance on some benchmark I guess, which when you read from /dev/zero into a private mapping, would map the zero page there (look up read_zero_pagealigned() and zeromap_page_range() if you dare). So there was another category of page to be skipped along with the anon COWs, and I didn't want multiple tests in the zap loop, so checking check_mapping against page->mapping did both. I think nowadays you could do it by checking for PageAnon page (or genuine swap entry) instead. This patch replaces the zap_details.zap_mapping pointer into the even_cows boolean, then we check it against PageAnon. Link: https://lkml.kernel.org/r/20220216094810.60572-4-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Suggested-by: Hugh Dickins <hughd@google.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:21 +00:00
details.even_cows = false;
details.single_folio = folio;
details.zap_flags = ZAP_FLAG_DROP_MARKER;
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared Revert 48ec833b7851 ("Revert "mm/memory.c: share the i_mmap_rwsem"") to reinstate c8475d144abb ("mm/memory.c: share the i_mmap_rwsem"): the unmap_mapping_range family of functions do the unmapping of user pages (ultimately via zap_page_range_single) without modifying the interval tree itself, and unmapping races are necessarily guarded by page table lock, thus the i_mmap_rwsem should be shared in unmap_mapping_pages() and unmap_mapping_folio(). Commit 48ec833b7851 was intended as a short-term measure, allowing the other shared lock changes into 3.19 final, before investigating three trinity crashes, one of which had been bisected to commit c8475d144ab: [1] https://lkml.org/lkml/2014/11/14/342 https://lore.kernel.org/lkml/5466142C.60100@oracle.com/ [2] https://lkml.org/lkml/2014/12/22/213 https://lore.kernel.org/lkml/549832E2.8060609@oracle.com/ [3] https://lkml.org/lkml/2014/12/9/741 https://lore.kernel.org/lkml/5487ACC5.1010002@oracle.com/ Two of those were Bad page states: free_pages_prepare() found PG_mlocked still set - almost certain to have been fixed by 4.4 commit b87537d9e2fe ("mm: rmap use pte lock not mmap_sem to set PageMlocked"). The NULL deref on rwsem in [2]: unclear, only happened once, not bisected to c8475d144ab. No change to the i_mmap_lock_write() around __unmap_hugepage_range_final() in unmap_single_vma(): IIRC that's a special usage, helping to serialize hugetlbfs page table sharing, not to be dabbled with lightly. No change to other uses of i_mmap_lock_write() by hugetlbfs. I am not aware of any significant gains from the concurrency allowed by this commit: it is submitted more to resolve an ancient misunderstanding. Link: https://lkml.kernel.org/r/e4a5e356-6c87-47b2-3ce8-c2a95ae84e20@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Sasha Levin <sashal@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:14:02 +00:00
i_mmap_lock_read(mapping);
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
if (unlikely(!RB_EMPTY_ROOT(&mapping->i_mmap.rb_root)))
unmap_mapping_range_tree(&mapping->i_mmap, first_index,
last_index, &details);
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared Revert 48ec833b7851 ("Revert "mm/memory.c: share the i_mmap_rwsem"") to reinstate c8475d144abb ("mm/memory.c: share the i_mmap_rwsem"): the unmap_mapping_range family of functions do the unmapping of user pages (ultimately via zap_page_range_single) without modifying the interval tree itself, and unmapping races are necessarily guarded by page table lock, thus the i_mmap_rwsem should be shared in unmap_mapping_pages() and unmap_mapping_folio(). Commit 48ec833b7851 was intended as a short-term measure, allowing the other shared lock changes into 3.19 final, before investigating three trinity crashes, one of which had been bisected to commit c8475d144ab: [1] https://lkml.org/lkml/2014/11/14/342 https://lore.kernel.org/lkml/5466142C.60100@oracle.com/ [2] https://lkml.org/lkml/2014/12/22/213 https://lore.kernel.org/lkml/549832E2.8060609@oracle.com/ [3] https://lkml.org/lkml/2014/12/9/741 https://lore.kernel.org/lkml/5487ACC5.1010002@oracle.com/ Two of those were Bad page states: free_pages_prepare() found PG_mlocked still set - almost certain to have been fixed by 4.4 commit b87537d9e2fe ("mm: rmap use pte lock not mmap_sem to set PageMlocked"). The NULL deref on rwsem in [2]: unclear, only happened once, not bisected to c8475d144ab. No change to the i_mmap_lock_write() around __unmap_hugepage_range_final() in unmap_single_vma(): IIRC that's a special usage, helping to serialize hugetlbfs page table sharing, not to be dabbled with lightly. No change to other uses of i_mmap_lock_write() by hugetlbfs. I am not aware of any significant gains from the concurrency allowed by this commit: it is submitted more to resolve an ancient misunderstanding. Link: https://lkml.kernel.org/r/e4a5e356-6c87-47b2-3ce8-c2a95ae84e20@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Sasha Levin <sashal@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:14:02 +00:00
i_mmap_unlock_read(mapping);
mm/thp: unmap_mapping_page() to fix THP truncate_cleanup_page() There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da085c2 ("truncate: handle file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:24:03 +00:00
}
/**
* unmap_mapping_pages() - Unmap pages from processes.
* @mapping: The address space containing pages to be unmapped.
* @start: Index of first page to be unmapped.
* @nr: Number of pages to be unmapped. 0 to unmap to end of file.
* @even_cows: Whether to unmap even private COWed pages.
*
* Unmap the pages in this address space from any userspace process which
* has them mmaped. Generally, you want to remove COWed pages as well when
* a file is being truncated, but not when invalidating pages from the page
* cache.
*/
void unmap_mapping_pages(struct address_space *mapping, pgoff_t start,
pgoff_t nr, bool even_cows)
{
struct zap_details details = { };
pgoff_t first_index = start;
pgoff_t last_index = start + nr - 1;
mm: change zap_details.zap_mapping into even_cows Currently we have a zap_mapping pointer maintained in zap_details, when it is specified we only want to zap the pages that has the same mapping with what the caller has specified. But what we want to do is actually simpler: we want to skip zapping private (COW-ed) pages in some cases. We can refer to unmap_mapping_pages() callers where we could have passed in different even_cows values. The other user is unmap_mapping_folio() where we always want to skip private pages. According to Hugh, we used a mapping pointer for historical reason, as explained here: https://lore.kernel.org/lkml/391aa58d-ce84-9d4-d68d-d98a9c533255@google.com/ Quoting partly from Hugh: Which raises the question again of why I did not just use a boolean flag there originally: aah, I think I've found why. In those days there was a horrible "optimization", for better performance on some benchmark I guess, which when you read from /dev/zero into a private mapping, would map the zero page there (look up read_zero_pagealigned() and zeromap_page_range() if you dare). So there was another category of page to be skipped along with the anon COWs, and I didn't want multiple tests in the zap loop, so checking check_mapping against page->mapping did both. I think nowadays you could do it by checking for PageAnon page (or genuine swap entry) instead. This patch replaces the zap_details.zap_mapping pointer into the even_cows boolean, then we check it against PageAnon. Link: https://lkml.kernel.org/r/20220216094810.60572-4-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Suggested-by: Hugh Dickins <hughd@google.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:42:21 +00:00
details.even_cows = even_cows;
if (last_index < first_index)
last_index = ULONG_MAX;
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared Revert 48ec833b7851 ("Revert "mm/memory.c: share the i_mmap_rwsem"") to reinstate c8475d144abb ("mm/memory.c: share the i_mmap_rwsem"): the unmap_mapping_range family of functions do the unmapping of user pages (ultimately via zap_page_range_single) without modifying the interval tree itself, and unmapping races are necessarily guarded by page table lock, thus the i_mmap_rwsem should be shared in unmap_mapping_pages() and unmap_mapping_folio(). Commit 48ec833b7851 was intended as a short-term measure, allowing the other shared lock changes into 3.19 final, before investigating three trinity crashes, one of which had been bisected to commit c8475d144ab: [1] https://lkml.org/lkml/2014/11/14/342 https://lore.kernel.org/lkml/5466142C.60100@oracle.com/ [2] https://lkml.org/lkml/2014/12/22/213 https://lore.kernel.org/lkml/549832E2.8060609@oracle.com/ [3] https://lkml.org/lkml/2014/12/9/741 https://lore.kernel.org/lkml/5487ACC5.1010002@oracle.com/ Two of those were Bad page states: free_pages_prepare() found PG_mlocked still set - almost certain to have been fixed by 4.4 commit b87537d9e2fe ("mm: rmap use pte lock not mmap_sem to set PageMlocked"). The NULL deref on rwsem in [2]: unclear, only happened once, not bisected to c8475d144ab. No change to the i_mmap_lock_write() around __unmap_hugepage_range_final() in unmap_single_vma(): IIRC that's a special usage, helping to serialize hugetlbfs page table sharing, not to be dabbled with lightly. No change to other uses of i_mmap_lock_write() by hugetlbfs. I am not aware of any significant gains from the concurrency allowed by this commit: it is submitted more to resolve an ancient misunderstanding. Link: https://lkml.kernel.org/r/e4a5e356-6c87-47b2-3ce8-c2a95ae84e20@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Sasha Levin <sashal@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:14:02 +00:00
i_mmap_lock_read(mapping);
if (unlikely(!RB_EMPTY_ROOT(&mapping->i_mmap.rb_root)))
unmap_mapping_range_tree(&mapping->i_mmap, first_index,
last_index, &details);
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared Revert 48ec833b7851 ("Revert "mm/memory.c: share the i_mmap_rwsem"") to reinstate c8475d144abb ("mm/memory.c: share the i_mmap_rwsem"): the unmap_mapping_range family of functions do the unmapping of user pages (ultimately via zap_page_range_single) without modifying the interval tree itself, and unmapping races are necessarily guarded by page table lock, thus the i_mmap_rwsem should be shared in unmap_mapping_pages() and unmap_mapping_folio(). Commit 48ec833b7851 was intended as a short-term measure, allowing the other shared lock changes into 3.19 final, before investigating three trinity crashes, one of which had been bisected to commit c8475d144ab: [1] https://lkml.org/lkml/2014/11/14/342 https://lore.kernel.org/lkml/5466142C.60100@oracle.com/ [2] https://lkml.org/lkml/2014/12/22/213 https://lore.kernel.org/lkml/549832E2.8060609@oracle.com/ [3] https://lkml.org/lkml/2014/12/9/741 https://lore.kernel.org/lkml/5487ACC5.1010002@oracle.com/ Two of those were Bad page states: free_pages_prepare() found PG_mlocked still set - almost certain to have been fixed by 4.4 commit b87537d9e2fe ("mm: rmap use pte lock not mmap_sem to set PageMlocked"). The NULL deref on rwsem in [2]: unclear, only happened once, not bisected to c8475d144ab. No change to the i_mmap_lock_write() around __unmap_hugepage_range_final() in unmap_single_vma(): IIRC that's a special usage, helping to serialize hugetlbfs page table sharing, not to be dabbled with lightly. No change to other uses of i_mmap_lock_write() by hugetlbfs. I am not aware of any significant gains from the concurrency allowed by this commit: it is submitted more to resolve an ancient misunderstanding. Link: https://lkml.kernel.org/r/e4a5e356-6c87-47b2-3ce8-c2a95ae84e20@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Sasha Levin <sashal@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:14:02 +00:00
i_mmap_unlock_read(mapping);
}
afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/
2021-09-02 15:43:10 +00:00
EXPORT_SYMBOL_GPL(unmap_mapping_pages);
/**
* unmap_mapping_range - unmap the portion of all mmaps in the specified
* address_space corresponding to the specified byte range in the underlying
* file.
*
* @mapping: the address space containing mmaps to be unmapped.
* @holebegin: byte in first page to unmap, relative to the start of
* the underlying file. This will be rounded down to a PAGE_SIZE
* boundary. Note that this is different from truncate_pagecache(), which
* must keep the partial page. In contrast, we must get rid of
* partial pages.
* @holelen: size of prospective hole in bytes. This will be rounded
* up to a PAGE_SIZE boundary. A holelen of zero truncates to the
* end of the file.
* @even_cows: 1 when truncating a file, unmap even private COWed pages;
* but 0 when invalidating pagecache, don't throw away private data.
*/
void unmap_mapping_range(struct address_space *mapping,
loff_t const holebegin, loff_t const holelen, int even_cows)
{
mm: fix unmap_mapping_range high bits shift bug The bug happens when highest bit of holebegin is 1, suppose holebegin is 0x8000000111111000, after shift, hba would be 0xfff8000000111111, then vma_interval_tree_foreach would look it up fail or leads to the wrong result. error call seq e.g.: - mmap(..., offset=0x8000000111111000) |- syscall(mmap, ... unsigned long, off): |- ksys_mmap_pgoff( ... , off >> PAGE_SHIFT); here pgoff is correctly shifted to 0x8000000111111, but pass 0x8000000111111000 as holebegin to unmap would then cause terrible result, as shown below: - unmap_mapping_range(..., loff_t const holebegin) |- pgoff_t hba = holebegin >> PAGE_SHIFT; /* hba = 0xfff8000000111111 unexpectedly */ The issue happens in Heterogeneous computing, where the device(e.g. gpu) and host share the same virtual address space. A simple workflow pattern which hit the issue is: /* host */ 1. userspace first mmap a file backed VA range with specified offset. e.g. (offset=0x800..., mmap return: va_a) 2. write some data to the corresponding sys page e.g. (va_a = 0xAABB) /* device */ 3. gpu workload touches VA, triggers gpu fault and notify the host. /* host */ 4. reviced gpu fault notification, then it will: 4.1 unmap host pages and also takes care of cpu tlb (use unmap_mapping_range with offset=0x800...) 4.2 migrate sys page to device 4.3 setup device page table and resolve device fault. /* device */ 5. gpu workload continued, it accessed va_a and got 0xAABB. 6. gpu workload continued, it wrote 0xBBCC to va_a. /* host */ 7. userspace access va_a, as expected, it will: 7.1 trigger cpu vm fault. 7.2 driver handling fault to migrate gpu local page to host. 8. userspace then could correctly get 0xBBCC from va_a 9. done But in step 4.1, if we hit the bug this patch mentioned, then userspace would never trigger cpu fault, and still get the old value: 0xAABB. Making holebegin unsigned first fixes the bug. Link: https://lkml.kernel.org/r/20231220052839.26970-1-jiajun.xie.sh@gmail.com Signed-off-by: Jiajun Xie <jiajun.xie.sh@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20 05:28:39 +00:00
pgoff_t hba = (pgoff_t)(holebegin) >> PAGE_SHIFT;
pgoff_t hlen = ((pgoff_t)(holelen) + PAGE_SIZE - 1) >> PAGE_SHIFT;
/* Check for overflow. */
if (sizeof(holelen) > sizeof(hlen)) {
long long holeend =
(holebegin + holelen + PAGE_SIZE - 1) >> PAGE_SHIFT;
if (holeend & ~(long long)ULONG_MAX)
hlen = ULONG_MAX - hba + 1;
}
unmap_mapping_pages(mapping, hba, hlen, even_cows);
}
EXPORT_SYMBOL(unmap_mapping_range);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
/*
* Restore a potential device exclusive pte to a working pte entry
*/
static vm_fault_t remove_device_exclusive_entry(struct vm_fault *vmf)
{
struct folio *folio = page_folio(vmf->page);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
struct vm_area_struct *vma = vmf->vma;
struct mmu_notifier_range range;
vm_fault_t ret;
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
mm: take a page reference when removing device exclusive entries Device exclusive page table entries are used to prevent CPU access to a page whilst it is being accessed from a device. Typically this is used to implement atomic operations when the underlying bus does not support atomic access. When a CPU thread encounters a device exclusive entry it locks the page and restores the original entry after calling mmu notifiers to signal drivers that exclusive access is no longer available. The device exclusive entry holds a reference to the page making it safe to access the struct page whilst the entry is present. However the fault handling code does not hold the PTL when taking the page lock. This means if there are multiple threads faulting concurrently on the device exclusive entry one will remove the entry whilst others will wait on the page lock without holding a reference. This can lead to threads locking or waiting on a folio with a zero refcount. Whilst mmap_lock prevents the pages getting freed via munmap() they may still be freed by a migration. This leads to warnings such as PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount drops to zero. Fix this by trying to take a reference on the folio before locking it. The code already checks the PTE under the PTL and aborts if the entry is no longer there. It is also possible the folio has been unmapped, freed and re-allocated allowing a reference to be taken on an unrelated folio. This case is also detected by the PTE check and the folio is unlocked without further changes. Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com Fixes: b756a3b5e7ea ("mm: device exclusive memory access") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-30 01:25:19 +00:00
/*
* We need a reference to lock the folio because we don't hold
* the PTL so a racing thread can remove the device-exclusive
* entry and unmap it. If the folio is free the entry must
* have been removed already. If it happens to have already
* been re-allocated after being freed all we do is lock and
* unlock it.
*/
if (!folio_try_get(folio))
return 0;
ret = folio_lock_or_retry(folio, vmf);
if (ret) {
mm: take a page reference when removing device exclusive entries Device exclusive page table entries are used to prevent CPU access to a page whilst it is being accessed from a device. Typically this is used to implement atomic operations when the underlying bus does not support atomic access. When a CPU thread encounters a device exclusive entry it locks the page and restores the original entry after calling mmu notifiers to signal drivers that exclusive access is no longer available. The device exclusive entry holds a reference to the page making it safe to access the struct page whilst the entry is present. However the fault handling code does not hold the PTL when taking the page lock. This means if there are multiple threads faulting concurrently on the device exclusive entry one will remove the entry whilst others will wait on the page lock without holding a reference. This can lead to threads locking or waiting on a folio with a zero refcount. Whilst mmap_lock prevents the pages getting freed via munmap() they may still be freed by a migration. This leads to warnings such as PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount drops to zero. Fix this by trying to take a reference on the folio before locking it. The code already checks the PTE under the PTL and aborts if the entry is no longer there. It is also possible the folio has been unmapped, freed and re-allocated allowing a reference to be taken on an unrelated folio. This case is also detected by the PTE check and the folio is unlocked without further changes. Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com Fixes: b756a3b5e7ea ("mm: device exclusive memory access") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-30 01:25:19 +00:00
folio_put(folio);
return ret;
mm: take a page reference when removing device exclusive entries Device exclusive page table entries are used to prevent CPU access to a page whilst it is being accessed from a device. Typically this is used to implement atomic operations when the underlying bus does not support atomic access. When a CPU thread encounters a device exclusive entry it locks the page and restores the original entry after calling mmu notifiers to signal drivers that exclusive access is no longer available. The device exclusive entry holds a reference to the page making it safe to access the struct page whilst the entry is present. However the fault handling code does not hold the PTL when taking the page lock. This means if there are multiple threads faulting concurrently on the device exclusive entry one will remove the entry whilst others will wait on the page lock without holding a reference. This can lead to threads locking or waiting on a folio with a zero refcount. Whilst mmap_lock prevents the pages getting freed via munmap() they may still be freed by a migration. This leads to warnings such as PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount drops to zero. Fix this by trying to take a reference on the folio before locking it. The code already checks the PTE under the PTL and aborts if the entry is no longer there. It is also possible the folio has been unmapped, freed and re-allocated allowing a reference to be taken on an unrelated folio. This case is also detected by the PTE check and the folio is unlocked without further changes. Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com Fixes: b756a3b5e7ea ("mm: device exclusive memory access") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-30 01:25:19 +00:00
}
mmu_notifier_range_init_owner(&range, MMU_NOTIFY_EXCLUSIVE, 0,
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
vma->vm_mm, vmf->address & PAGE_MASK,
(vmf->address & PAGE_MASK) + PAGE_SIZE, NULL);
mmu_notifier_invalidate_range_start(&range);
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address,
&vmf->ptl);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (likely(vmf->pte && pte_same(ptep_get(vmf->pte), vmf->orig_pte)))
restore_exclusive_pte(vma, vmf->page, vmf->address, vmf->pte);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (vmf->pte)
pte_unmap_unlock(vmf->pte, vmf->ptl);
folio_unlock(folio);
mm: take a page reference when removing device exclusive entries Device exclusive page table entries are used to prevent CPU access to a page whilst it is being accessed from a device. Typically this is used to implement atomic operations when the underlying bus does not support atomic access. When a CPU thread encounters a device exclusive entry it locks the page and restores the original entry after calling mmu notifiers to signal drivers that exclusive access is no longer available. The device exclusive entry holds a reference to the page making it safe to access the struct page whilst the entry is present. However the fault handling code does not hold the PTL when taking the page lock. This means if there are multiple threads faulting concurrently on the device exclusive entry one will remove the entry whilst others will wait on the page lock without holding a reference. This can lead to threads locking or waiting on a folio with a zero refcount. Whilst mmap_lock prevents the pages getting freed via munmap() they may still be freed by a migration. This leads to warnings such as PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount drops to zero. Fix this by trying to take a reference on the folio before locking it. The code already checks the PTE under the PTL and aborts if the entry is no longer there. It is also possible the folio has been unmapped, freed and re-allocated allowing a reference to be taken on an unrelated folio. This case is also detected by the PTE check and the folio is unlocked without further changes. Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com Fixes: b756a3b5e7ea ("mm: device exclusive memory access") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-30 01:25:19 +00:00
folio_put(folio);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
mmu_notifier_invalidate_range_end(&range);
return 0;
}
static inline bool should_try_to_free_swap(struct folio *folio,
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
struct vm_area_struct *vma,
unsigned int fault_flags)
{
if (!folio_test_swapcache(folio))
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
return false;
if (mem_cgroup_swap_full(folio) || (vma->vm_flags & VM_LOCKED) ||
folio_test_mlocked(folio))
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
return true;
/*
* If we want to map a page that's in the swapcache writable, we
* have to detect via the refcount if we're really the exclusive
* user. Try freeing the swapcache to get rid of the swapcache
* reference only in case it's likely that we'll be the exlusive user.
*/
return (fault_flags & FAULT_FLAG_WRITE) && !folio_test_ksm(folio) &&
mm: swap: make should_try_to_free_swap() support large-folio The function should_try_to_free_swap() operates under the assumption that swap-in always occurs at the normal page granularity, i.e., folio_nr_pages() = 1. However, in reality, for large folios, add_to_swap_cache() will invoke folio_ref_add(folio, nr). To accommodate large folio swap-in, this patch eliminates this assumption. Link: https://lkml.kernel.org/r/20240529082824.150954-6-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:23 +00:00
folio_ref_count(folio) == (1 + folio_nr_pages(folio));
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
}
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
static vm_fault_t pte_marker_clear(struct vm_fault *vmf)
{
vmf->pte = pte_offset_map_lock(vmf->vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (!vmf->pte)
return 0;
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
/*
* Be careful so that we will only recover a special uffd-wp pte into a
* none pte. Otherwise it means the pte could have changed, so retry.
mm: fix a few rare cases of using swapin error pte marker This patch should harden commit 15520a3f0469 ("mm: use pte markers for swap errors") on using pte markers for swapin errors on a few corner cases. 1. Propagate swapin errors across fork()s: if there're swapin errors in the parent mm, after fork()s the child should sigbus too when an error page is accessed. 2. Fix a rare condition race in pte_marker_clear() where a uffd-wp pte marker can be quickly switched to a swapin error. 3. Explicitly ignore swapin error pte markers in change_protection(). I mostly don't worry on (2) or (3) at all, but we should still have them. Case (1) is special because it can potentially cause silent data corrupt on child when parent has swapin error triggered with swapoff, but since swapin error is rare itself already it's probably not easy to trigger either. Currently there is a priority difference between the uffd-wp bit and the swapin error entry, in which the swapin error always has higher priority (e.g. we don't need to wr-protect a swapin error pte marker). If there will be a 3rd bit introduced, we'll probably need to consider a more involved approach so we may need to start operate on the bits. Let's leave that for later. This patch is tested with case (1) explicitly where we'll get corrupted data before in the child if there's existing swapin error pte markers, and after patch applied the child can be rightfully killed. We don't need to copy stable for this one since 15520a3f0469 just landed as part of v6.2-rc1, only "Fixes" applied. Link: https://lkml.kernel.org/r/20221214200453.1772655-3-peterx@redhat.com Fixes: 15520a3f0469 ("mm: use pte markers for swap errors") Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 20:04:53 +00:00
*
* This should also cover the case where e.g. the pte changed
mm: make PTE_MARKER_SWAPIN_ERROR more general Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD", v4. This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4 for a detailed description of the feature. This patch (of 8): Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement UFFDIO_POISON, so make some various preparations for that: First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be confusing since we're going to re-use it for something not really related to swap. This can be particularly confusing for things like hugetlbfs, which doesn't support swap whatsoever. Also rename some various helper functions. Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap. But, since we're going to re-use it, we want it to go ahead and copy it just like non-hugetlbfs memory does today. Since the code to do this is more complicated now, pull it out into a helper which can be re-used in both places. While we're at it, also make it slightly more explicit in its handling of e.g. uffd wp markers. For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't matter, e.g. a userspace program would receive a SIGBUS either way. But for UFFDIO_POISON, this change will let KVM guests get an MCE out of the box, instead of giving a SIGBUS to the hypervisor and requiring it to somehow inject an MCE. Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today because the lack of swap support means we'll never end up with such a PTE anyway, but this behavior will be needed once such entries *can* show up via UFFDIO_POISON. Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
* quickly from a PTE_MARKER_UFFD_WP into PTE_MARKER_POISONED.
mm: fix a few rare cases of using swapin error pte marker This patch should harden commit 15520a3f0469 ("mm: use pte markers for swap errors") on using pte markers for swapin errors on a few corner cases. 1. Propagate swapin errors across fork()s: if there're swapin errors in the parent mm, after fork()s the child should sigbus too when an error page is accessed. 2. Fix a rare condition race in pte_marker_clear() where a uffd-wp pte marker can be quickly switched to a swapin error. 3. Explicitly ignore swapin error pte markers in change_protection(). I mostly don't worry on (2) or (3) at all, but we should still have them. Case (1) is special because it can potentially cause silent data corrupt on child when parent has swapin error triggered with swapoff, but since swapin error is rare itself already it's probably not easy to trigger either. Currently there is a priority difference between the uffd-wp bit and the swapin error entry, in which the swapin error always has higher priority (e.g. we don't need to wr-protect a swapin error pte marker). If there will be a 3rd bit introduced, we'll probably need to consider a more involved approach so we may need to start operate on the bits. Let's leave that for later. This patch is tested with case (1) explicitly where we'll get corrupted data before in the child if there's existing swapin error pte markers, and after patch applied the child can be rightfully killed. We don't need to copy stable for this one since 15520a3f0469 just landed as part of v6.2-rc1, only "Fixes" applied. Link: https://lkml.kernel.org/r/20221214200453.1772655-3-peterx@redhat.com Fixes: 15520a3f0469 ("mm: use pte markers for swap errors") Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 20:04:53 +00:00
* So is_pte_marker() check is not enough to safely drop the pte.
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
*/
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_same(vmf->orig_pte, ptep_get(vmf->pte)))
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
pte_clear(vmf->vma->vm_mm, vmf->address, vmf->pte);
pte_unmap_unlock(vmf->pte, vmf->ptl);
return 0;
}
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
static vm_fault_t do_pte_missing(struct vm_fault *vmf)
{
if (vma_is_anonymous(vmf->vma))
return do_anonymous_page(vmf);
else
return do_fault(vmf);
}
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
/*
* This is actually a page-missing access, but with uffd-wp special pte
* installed. It means this pte was wr-protected before being unmapped.
*/
static vm_fault_t pte_marker_handle_uffd_wp(struct vm_fault *vmf)
{
/*
* Just in case there're leftover special ptes even after the region
* got unregistered - we can simply clear them.
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
*/
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
if (unlikely(!userfaultfd_wp(vmf->vma)))
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
return pte_marker_clear(vmf);
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
return do_pte_missing(vmf);
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
}
static vm_fault_t handle_pte_marker(struct vm_fault *vmf)
{
swp_entry_t entry = pte_to_swp_entry(vmf->orig_pte);
unsigned long marker = pte_marker_get(entry);
/*
* PTE markers should never be empty. If anything weird happened,
* the best thing to do is to kill the process along with its mm.
*/
if (WARN_ON_ONCE(!marker))
return VM_FAULT_SIGBUS;
/* Higher priority than uffd-wp when data corrupted */
mm: make PTE_MARKER_SWAPIN_ERROR more general Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD", v4. This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4 for a detailed description of the feature. This patch (of 8): Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement UFFDIO_POISON, so make some various preparations for that: First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be confusing since we're going to re-use it for something not really related to swap. This can be particularly confusing for things like hugetlbfs, which doesn't support swap whatsoever. Also rename some various helper functions. Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap. But, since we're going to re-use it, we want it to go ahead and copy it just like non-hugetlbfs memory does today. Since the code to do this is more complicated now, pull it out into a helper which can be re-used in both places. While we're at it, also make it slightly more explicit in its handling of e.g. uffd wp markers. For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't matter, e.g. a userspace program would receive a SIGBUS either way. But for UFFDIO_POISON, this change will let KVM guests get an MCE out of the box, instead of giving a SIGBUS to the hypervisor and requiring it to somehow inject an MCE. Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today because the lack of swap support means we'll never end up with such a PTE anyway, but this behavior will be needed once such entries *can* show up via UFFDIO_POISON. Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
if (marker & PTE_MARKER_POISONED)
return VM_FAULT_HWPOISON;
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
if (pte_marker_entry_uffd_wp(entry))
return pte_marker_handle_uffd_wp(vmf);
/* This is an unknown pte marker */
return VM_FAULT_SIGBUS;
}
/*
* We enter with non-exclusive mmap_lock (to exclude vma changes,
* but allow concurrent faults), and pte mapped but not yet locked.
* We return with pte unmapped and unlocked.
*
* We return with the mmap_lock locked or unlocked in the same cases
* as does filemap_fault().
*/
vm_fault_t do_swap_page(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
struct folio *swapcache, *folio = NULL;
struct page *page;
swap: fix do_swap_page() race with swapoff When I was investigating the swap code, I found the below possible race window: CPU 1 CPU 2 ----- ----- do_swap_page if (data_race(si->flags & SWP_SYNCHRONOUS_IO) swap_readpage if (data_race(sis->flags & SWP_FS_OPS)) { swapoff .. p->swap_file = NULL; .. struct file *swap_file = sis->swap_file; struct address_space *mapping = swap_file->f_mapping;[oops!] Note that for the pages that are swapped in through swap cache, this isn't an issue. Because the page is locked, and the swap entry will be marked with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been unlocked. Fix this race by using get/put_swap_device() to guard against concurrent swapoff. Link: https://lkml.kernel.org/r/20210426123316.806267-3-linmiaohe@huawei.com Fixes: 0bcac06f27d7 ("mm,swap: skip swapcache for swapin of synchronous device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:50 +00:00
struct swap_info_struct *si = NULL;
rmap_t rmap_flags = RMAP_NONE;
mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" <ying.huang@intel.com> Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/ Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <21cnbao@gmail.com> Cc: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-06 18:25:59 +00:00
bool need_clear_cache = false;
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
bool exclusive = false;
swp_entry_t entry;
pte_t pte;
vm_fault_t ret = 0;
void *shadow = NULL;
mm: swap: entirely map large folios found in swapcache When a large folio is found in the swapcache, the current implementation requires calling do_swap_page() nr_pages times, resulting in nr_pages page faults. This patch opts to map the entire large folio at once to minimize page faults. Additionally, redundant checks and early exits for ARM64 MTE restoring are removed. Link: https://lkml.kernel.org/r/20240529082824.150954-7-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:24 +00:00
int nr_pages;
unsigned long page_idx;
unsigned long address;
pte_t *ptep;
if (!pte_unmap_same(vmf))
goto out;
entry = pte_to_swp_entry(vmf->orig_pte);
if (unlikely(non_swap_entry(entry))) {
if (is_migration_entry(entry)) {
migration_entry_wait(vma->vm_mm, vmf->pmd,
vmf->address);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
} else if (is_device_exclusive_entry(entry)) {
vmf->page = pfn_swap_entry_to_page(entry);
ret = remove_device_exclusive_entry(vmf);
mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:43 +00:00
} else if (is_device_private_entry(entry)) {
mm: handle swap page faults under per-VMA lock When page fault is handled under per-VMA lock protection, all swap page faults are retried with mmap_lock because folio_lock_or_retry has to drop and reacquire mmap_lock if folio could not be immediately locked. Follow the same pattern as mmap_lock to drop per-VMA lock when waiting for folio and retrying once folio is available. With this obstacle removed, enable do_swap_page to operate under per-VMA lock protection. Drivers implementing ops->migrate_to_ram might still rely on mmap_lock, therefore we have to fall back to mmap_lock in that particular case. Note that the only time do_swap_page calls synchronous swap_readpage is when SWP_SYNCHRONOUS_IO is set, which is only set for QUEUE_FLAG_SYNCHRONOUS devices: brd, zram and nvdimms (both btt and pmem). Therefore we don't sleep in this path, and there's no need to drop the mmap or per-VMA lock. Link: https://lkml.kernel.org/r/20230630211957.1341547-6-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Tested-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hillf Danton <hdanton@sina.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Michel Lespinasse <michel@lespinasse.org> Cc: Minchan Kim <minchan@google.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-30 21:19:56 +00:00
if (vmf->flags & FAULT_FLAG_VMA_LOCK) {
/*
* migrate_to_ram is not yet ready to operate
* under VMA lock.
*/
vma_end_read(vma);
ret = VM_FAULT_RETRY;
goto out;
}
mm: remove special swap entry functions Patch series "Add support for SVM atomics in Nouveau", v11. Introduction ============ Some devices have features such as atomic PTE bits that can be used to implement atomic access to system memory. To support atomic operations to a shared virtual memory page such a device needs access to that page which is exclusive of the CPU. This series introduces a mechanism to temporarily unmap pages granting exclusive access to a device. These changes are required to support OpenCL atomic operations in Nouveau to shared virtual memory (SVM) regions allocated with the CL_MEM_SVM_ATOMICS clSVMAlloc flag. A more complete description of the OpenCL SVM feature is available at https://www.khronos.org/registry/OpenCL/specs/3.0-unified/html/ OpenCL_API.html#_shared_virtual_memory . Implementation ============== Exclusive device access is implemented by adding a new swap entry type (SWAP_DEVICE_EXCLUSIVE) which is similar to a migration entry. The main difference is that on fault the original entry is immediately restored by the fault handler instead of waiting. Restoring the entry triggers calls to MMU notifers which allows a device driver to revoke the atomic access permission from the GPU prior to the CPU finalising the entry. Patches ======= Patches 1 & 2 refactor existing migration and device private entry functions. Patches 3 & 4 rework try_to_unmap_one() by splitting out unrelated functionality into separate functions - try_to_migrate_one() and try_to_munlock_one(). Patch 5 renames some existing code but does not introduce functionality. Patch 6 is a small clean-up to swap entry handling in copy_pte_range(). Patch 7 contains the bulk of the implementation for device exclusive memory. Patch 8 contains some additions to the HMM selftests to ensure everything works as expected. Patch 9 is a cleanup for the Nouveau SVM implementation. Patch 10 contains the implementation of atomic access for the Nouveau driver. Testing ======= This has been tested with upstream Mesa 21.1.0 and a simple OpenCL program which checks that GPU atomic accesses to system memory are atomic. Without this series the test fails as there is no way of write-protecting the page mapping which results in the device clobbering CPU writes. For reference the test is available at https://ozlabs.org/~apopple/opencl_svm_atomics/ Further testing has been performed by adding support for testing exclusive access to the hmm-tests kselftests. This patch (of 10): Remove multiple similar inline functions for dealing with different types of special swap entries. Both migration and device private swap entries use the swap offset to store a pfn. Instead of multiple inline functions to obtain a struct page for each swap entry type use a common function pfn_swap_entry_to_page(). Also open-code the various entry_to_pfn() functions as this results is shorter code that is easier to understand. Link: https://lkml.kernel.org/r/20210616105937.23201-1-apopple@nvidia.com Link: https://lkml.kernel.org/r/20210616105937.23201-2-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:06 +00:00
vmf->page = pfn_swap_entry_to_page(entry);
mm/memory.c: fix race when faulting a device private page Patch series "Fix several device private page reference counting issues", v2 This series aims to fix a number of page reference counting issues in drivers dealing with device private ZONE_DEVICE pages. These result in use-after-free type bugs, either from accessing a struct page which no longer exists because it has been removed or accessing fields within the struct page which are no longer valid because the page has been freed. During normal usage it is unlikely these will cause any problems. However without these fixes it is possible to crash the kernel from userspace. These crashes can be triggered either by unloading the kernel module or unbinding the device from the driver prior to a userspace task exiting. In modules such as Nouveau it is also possible to trigger some of these issues by explicitly closing the device file-descriptor prior to the task exiting and then accessing device private memory. This involves some minor changes to both PowerPC and AMD GPU code. Unfortunately I lack hardware to test either of those so any help there would be appreciated. The changes mimic what is done in for both Nouveau and hmm-tests though so I doubt they will cause problems. This patch (of 8): When the CPU tries to access a device private page the migrate_to_ram() callback associated with the pgmap for the page is called. However no reference is taken on the faulting page. Therefore a concurrent migration of the device private page can free the page and possibly the underlying pgmap. This results in a race which can crash the kernel due to the migrate_to_ram() function pointer becoming invalid. It also means drivers can't reliably read the zone_device_data field because the page may have been freed with memunmap_pages(). Close the race by getting a reference on the page while holding the ptl to ensure it has not been freed. Unfortunately the elevated reference count will cause the migration required to handle the fault to fail. To avoid this failure pass the faulting page into the migrate_vma functions so that if an elevated reference count is found it can be checked to see if it's expected or not. [mpe@ellerman.id.au: fix build] Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Lyude Paul <lyude@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28 12:01:15 +00:00
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (unlikely(!vmf->pte ||
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
!pte_same(ptep_get(vmf->pte),
vmf->orig_pte)))
goto unlock;
mm/memory.c: fix race when faulting a device private page Patch series "Fix several device private page reference counting issues", v2 This series aims to fix a number of page reference counting issues in drivers dealing with device private ZONE_DEVICE pages. These result in use-after-free type bugs, either from accessing a struct page which no longer exists because it has been removed or accessing fields within the struct page which are no longer valid because the page has been freed. During normal usage it is unlikely these will cause any problems. However without these fixes it is possible to crash the kernel from userspace. These crashes can be triggered either by unloading the kernel module or unbinding the device from the driver prior to a userspace task exiting. In modules such as Nouveau it is also possible to trigger some of these issues by explicitly closing the device file-descriptor prior to the task exiting and then accessing device private memory. This involves some minor changes to both PowerPC and AMD GPU code. Unfortunately I lack hardware to test either of those so any help there would be appreciated. The changes mimic what is done in for both Nouveau and hmm-tests though so I doubt they will cause problems. This patch (of 8): When the CPU tries to access a device private page the migrate_to_ram() callback associated with the pgmap for the page is called. However no reference is taken on the faulting page. Therefore a concurrent migration of the device private page can free the page and possibly the underlying pgmap. This results in a race which can crash the kernel due to the migrate_to_ram() function pointer becoming invalid. It also means drivers can't reliably read the zone_device_data field because the page may have been freed with memunmap_pages(). Close the race by getting a reference on the page while holding the ptl to ensure it has not been freed. Unfortunately the elevated reference count will cause the migration required to handle the fault to fail. To avoid this failure pass the faulting page into the migrate_vma functions so that if an elevated reference count is found it can be checked to see if it's expected or not. [mpe@ellerman.id.au: fix build] Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Lyude Paul <lyude@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28 12:01:15 +00:00
/*
* Get a page reference while we know the page can't be
* freed.
*/
get_page(vmf->page);
pte_unmap_unlock(vmf->pte, vmf->ptl);
ret = vmf->page->pgmap->ops->migrate_to_ram(vmf);
mm/memory.c: fix race when faulting a device private page Patch series "Fix several device private page reference counting issues", v2 This series aims to fix a number of page reference counting issues in drivers dealing with device private ZONE_DEVICE pages. These result in use-after-free type bugs, either from accessing a struct page which no longer exists because it has been removed or accessing fields within the struct page which are no longer valid because the page has been freed. During normal usage it is unlikely these will cause any problems. However without these fixes it is possible to crash the kernel from userspace. These crashes can be triggered either by unloading the kernel module or unbinding the device from the driver prior to a userspace task exiting. In modules such as Nouveau it is also possible to trigger some of these issues by explicitly closing the device file-descriptor prior to the task exiting and then accessing device private memory. This involves some minor changes to both PowerPC and AMD GPU code. Unfortunately I lack hardware to test either of those so any help there would be appreciated. The changes mimic what is done in for both Nouveau and hmm-tests though so I doubt they will cause problems. This patch (of 8): When the CPU tries to access a device private page the migrate_to_ram() callback associated with the pgmap for the page is called. However no reference is taken on the faulting page. Therefore a concurrent migration of the device private page can free the page and possibly the underlying pgmap. This results in a race which can crash the kernel due to the migrate_to_ram() function pointer becoming invalid. It also means drivers can't reliably read the zone_device_data field because the page may have been freed with memunmap_pages(). Close the race by getting a reference on the page while holding the ptl to ensure it has not been freed. Unfortunately the elevated reference count will cause the migration required to handle the fault to fail. To avoid this failure pass the faulting page into the migrate_vma functions so that if an elevated reference count is found it can be checked to see if it's expected or not. [mpe@ellerman.id.au: fix build] Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Lyude Paul <lyude@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28 12:01:15 +00:00
put_page(vmf->page);
} else if (is_hwpoison_entry(entry)) {
ret = VM_FAULT_HWPOISON;
} else if (is_pte_marker_entry(entry)) {
ret = handle_pte_marker(vmf);
} else {
print_bad_pte(vma, vmf->address, vmf->orig_pte, NULL);
ret = VM_FAULT_SIGBUS;
}
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
goto out;
}
swap: fix do_swap_page() race with swapoff When I was investigating the swap code, I found the below possible race window: CPU 1 CPU 2 ----- ----- do_swap_page if (data_race(si->flags & SWP_SYNCHRONOUS_IO) swap_readpage if (data_race(sis->flags & SWP_FS_OPS)) { swapoff .. p->swap_file = NULL; .. struct file *swap_file = sis->swap_file; struct address_space *mapping = swap_file->f_mapping;[oops!] Note that for the pages that are swapped in through swap cache, this isn't an issue. Because the page is locked, and the swap entry will be marked with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been unlocked. Fix this race by using get/put_swap_device() to guard against concurrent swapoff. Link: https://lkml.kernel.org/r/20210426123316.806267-3-linmiaohe@huawei.com Fixes: 0bcac06f27d7 ("mm,swap: skip swapcache for swapin of synchronous device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:50 +00:00
/* Prevent swapoff from happening to us. */
si = get_swap_device(entry);
if (unlikely(!si))
goto out;
folio = swap_cache_get_folio(entry, vma, vmf->address);
if (folio)
page = folio_file_page(folio, swp_offset(entry));
swapcache = folio;
if (!folio) {
mm/swapfile: fix and annotate various data races swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. [cai@lca.pw: add a missing annotation for si->flags in memory.c] Link: http://lkml.kernel.org/r/1581612647-5958-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/1581095163-12198-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15 00:31:31 +00:00
if (data_race(si->flags & SWP_SYNCHRONOUS_IO) &&
__swap_count(entry) == 1) {
mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" <ying.huang@intel.com> Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/ Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <21cnbao@gmail.com> Cc: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-06 18:25:59 +00:00
/*
* Prevent parallel swapin from proceeding with
* the cache flag. Otherwise, another thread may
* finish swapin first, free the entry, and swapout
* reusing the same entry. It's undetectable as
* pte_same() returns true due to entry reuse.
*/
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
if (swapcache_prepare(entry, 1)) {
mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" <ying.huang@intel.com> Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/ Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <21cnbao@gmail.com> Cc: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-06 18:25:59 +00:00
/* Relax a bit to prevent rapid repeated page faults */
schedule_timeout_uninterruptible(1);
goto out;
}
need_clear_cache = true;
/* skip swapcache */
folio = vma_alloc_folio(GFP_HIGHUSER_MOVABLE, 0,
vma, vmf->address, false);
if (folio) {
__folio_set_locked(folio);
__folio_set_swapbacked(folio);
mm: memcontrol: charge swapin pages on instantiation Right now, users that are otherwise memory controlled can easily escape their containment and allocate significant amounts of memory that they're not being charged for. That's because swap readahead pages are not being charged until somebody actually faults them into their page table. This can be exploited with MADV_WILLNEED, which triggers arbitrary readahead allocations without charging the pages. There are additional problems with the delayed charging of swap pages: 1. To implement refault/workingset detection for anonymous pages, we need to have a target LRU available at swapin time, but the LRU is not determinable until the page has been charged. 2. To implement per-cgroup LRU locking, we need page->mem_cgroup to be stable when the page is isolated from the LRU; otherwise, the locks change under us. But swapcache gets charged after it's already on the LRU, and even if we cannot isolate it ourselves (since charging is not exactly optional). The previous patch ensured we always maintain cgroup ownership records for swap pages. This patch moves the swapcache charging point from the fault handler to swapin time to fix all of the above problems. v2: simplify swapin error checking (Joonsoo) [hughd@google.com: fix livelock in __read_swap_cache_async()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005212246080.8458@eggly.anvils Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/20200508183105.225460-17-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:02:17 +00:00
if (mem_cgroup_swapin_charge_folio(folio,
vma->vm_mm, GFP_KERNEL,
entry)) {
ret = VM_FAULT_OOM;
mm: memcontrol: charge swapin pages on instantiation Right now, users that are otherwise memory controlled can easily escape their containment and allocate significant amounts of memory that they're not being charged for. That's because swap readahead pages are not being charged until somebody actually faults them into their page table. This can be exploited with MADV_WILLNEED, which triggers arbitrary readahead allocations without charging the pages. There are additional problems with the delayed charging of swap pages: 1. To implement refault/workingset detection for anonymous pages, we need to have a target LRU available at swapin time, but the LRU is not determinable until the page has been charged. 2. To implement per-cgroup LRU locking, we need page->mem_cgroup to be stable when the page is isolated from the LRU; otherwise, the locks change under us. But swapcache gets charged after it's already on the LRU, and even if we cannot isolate it ourselves (since charging is not exactly optional). The previous patch ensured we always maintain cgroup ownership records for swap pages. This patch moves the swapcache charging point from the fault handler to swapin time to fix all of the above problems. v2: simplify swapin error checking (Joonsoo) [hughd@google.com: fix livelock in __read_swap_cache_async()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005212246080.8458@eggly.anvils Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/20200508183105.225460-17-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:02:17 +00:00
goto out_page;
}
memcg: charge before adding to swapcache on swapin Currently the kernel adds the page, allocated for swapin, to the swapcache before charging the page. This is fine but now we want a per-memcg swapcache stat which is essential for folks who wants to transparently migrate from cgroup v1's memsw to cgroup v2's memory and swap counters. In addition charging a page before exposing it to other parts of the kernel is a step in the right direction. To correctly maintain the per-memcg swapcache stat, this patch has adopted to charge the page before adding it to swapcache. One challenge in this option is the failure case of add_to_swap_cache() on which we need to undo the mem_cgroup_charge(). Specifically undoing mem_cgroup_uncharge_swap() is not simple. To resolve the issue, this patch decouples the charging for swapin pages from mem_cgroup_charge(). Two new functions are introduced, mem_cgroup_swapin_charge_page() for just charging the swapin page and mem_cgroup_swapin_uncharge_swap() for uncharging the swap slot once the page has been successfully added to the swapcache. [shakeelb@google.com: set page->private before calling swap_readpage] Link: https://lkml.kernel.org/r/20210318015959.2986837-1-shakeelb@google.com Link: https://lkml.kernel.org/r/20210305212639.775498-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Heiko Carstens <hca@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 05:56:36 +00:00
mem_cgroup_swapin_uncharge_swap(entry);
mm: memcontrol: charge swapin pages on instantiation Right now, users that are otherwise memory controlled can easily escape their containment and allocate significant amounts of memory that they're not being charged for. That's because swap readahead pages are not being charged until somebody actually faults them into their page table. This can be exploited with MADV_WILLNEED, which triggers arbitrary readahead allocations without charging the pages. There are additional problems with the delayed charging of swap pages: 1. To implement refault/workingset detection for anonymous pages, we need to have a target LRU available at swapin time, but the LRU is not determinable until the page has been charged. 2. To implement per-cgroup LRU locking, we need page->mem_cgroup to be stable when the page is isolated from the LRU; otherwise, the locks change under us. But swapcache gets charged after it's already on the LRU, and even if we cannot isolate it ourselves (since charging is not exactly optional). The previous patch ensured we always maintain cgroup ownership records for swap pages. This patch moves the swapcache charging point from the fault handler to swapin time to fix all of the above problems. v2: simplify swapin error checking (Joonsoo) [hughd@google.com: fix livelock in __read_swap_cache_async()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005212246080.8458@eggly.anvils Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/20200508183105.225460-17-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:02:17 +00:00
shadow = get_shadow_from_swap_cache(entry);
if (shadow)
workingset_refault(folio, shadow);
folio_add_lru(folio);
memcg: charge before adding to swapcache on swapin Currently the kernel adds the page, allocated for swapin, to the swapcache before charging the page. This is fine but now we want a per-memcg swapcache stat which is essential for folks who wants to transparently migrate from cgroup v1's memsw to cgroup v2's memory and swap counters. In addition charging a page before exposing it to other parts of the kernel is a step in the right direction. To correctly maintain the per-memcg swapcache stat, this patch has adopted to charge the page before adding it to swapcache. One challenge in this option is the failure case of add_to_swap_cache() on which we need to undo the mem_cgroup_charge(). Specifically undoing mem_cgroup_uncharge_swap() is not simple. To resolve the issue, this patch decouples the charging for swapin pages from mem_cgroup_charge(). Two new functions are introduced, mem_cgroup_swapin_charge_page() for just charging the swapin page and mem_cgroup_swapin_uncharge_swap() for uncharging the swap slot once the page has been successfully added to the swapcache. [shakeelb@google.com: set page->private before calling swap_readpage] Link: https://lkml.kernel.org/r/20210318015959.2986837-1-shakeelb@google.com Link: https://lkml.kernel.org/r/20210305212639.775498-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Heiko Carstens <hca@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 05:56:36 +00:00
/* To provide entry to swap_read_folio() */
folio->swap = entry;
swap_read_folio(folio, NULL);
folio->private = NULL;
}
} else {
folio = swapin_readahead(entry, GFP_HIGHUSER_MOVABLE,
vmf);
swapcache = folio;
}
if (!folio) {
/*
* Back out if somebody else faulted in this pte
* while we released the pte lock.
*/
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (likely(vmf->pte &&
pte_same(ptep_get(vmf->pte), vmf->orig_pte)))
ret = VM_FAULT_OOM;
goto unlock;
}
/* Had to read the page from swap area: Major fault */
ret = VM_FAULT_MAJOR;
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 08:55:45 +00:00
count_vm_event(PGMAJFAULT);
count_memcg_event_mm(vma->vm_mm, PGMAJFAULT);
page = folio_file_page(folio, swp_offset(entry));
} else if (PageHWPoison(page)) {
/*
* hwpoisoned dirty swapcache pages are kept for killing
* owner processes (which may be unknown at hwpoison time)
*/
ret = VM_FAULT_HWPOISON;
goto out_release;
}
ret |= folio_lock_or_retry(folio, vmf);
if (ret & VM_FAULT_RETRY)
mm: retry page fault when blocking on disk transfer This change reduces mmap_sem hold times that are caused by waiting for disk transfers when accessing file mapped VMAs. It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call site wants mmap_sem to be released if blocking on a pending disk transfer. In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and do_page_fault() will then re-acquire mmap_sem and retry the page fault. It is expected that the retry will hit the same page which will now be cached, and thus it will complete with a low mmap_sem hold time. Tests: - microbenchmark: thread A mmaps a large file and does random read accesses to the mmaped area - achieves about 55 iterations/s. Thread B does mmap/munmap in a loop at a separate location - achieves 55 iterations/s before, 15000 iterations/s after. - We are seeing related effects in some applications in house, which show significant performance regressions when running without this change. [akpm@linux-foundation.org: fix warning & crash] Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 21:21:57 +00:00
goto out_release;
mm: slightly clarify KSM logic in do_swap_page() Let's make it clearer that KSM might only have to copy a page in case we have a page in the swapcache, not if we allocated a fresh page and bypassed the swapcache. While at it, add a comment why this is usually necessary and merge the two swapcache conditions. [akpm@linux-foundation.org: fix comment, per David] Link: https://lkml.kernel.org/r/20220131162940.210846-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:37 +00:00
if (swapcache) {
/*
* Make sure folio_free_swap() or swapoff did not release the
mm: slightly clarify KSM logic in do_swap_page() Let's make it clearer that KSM might only have to copy a page in case we have a page in the swapcache, not if we allocated a fresh page and bypassed the swapcache. While at it, add a comment why this is usually necessary and merge the two swapcache conditions. [akpm@linux-foundation.org: fix comment, per David] Link: https://lkml.kernel.org/r/20220131162940.210846-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:37 +00:00
* swapcache from under us. The page pin, and pte_same test
* below, are not enough to exclude that. Even if it is still
* swapcache, we need to check that the page's swap has not
* changed.
*/
if (unlikely(!folio_test_swapcache(folio) ||
mm/swap: stop using page->private on tail pages for THP_SWAP Patch series "mm/swap: stop using page->private on tail pages for THP_SWAP + cleanups". This series stops using page->private on tail pages for THP_SWAP, replaces folio->private by folio->swap for swapcache folios, and starts using "new_folio" for tail pages that we are splitting to remove the usage of page->private for swapcache handling completely. This patch (of 4): Let's stop using page->private on tail pages, making it possible to just unconditionally reuse that field in the tail pages of large folios. The remaining usage of the private field for THP_SWAP is in the THP splitting code (mm/huge_memory.c), that we'll handle separately later. Update the THP_SWAP documentation and sanity checks in mm_types.h and __split_huge_page_tail(). [david@redhat.com: stop using page->private on tail pages for THP_SWAP] Link: https://lkml.kernel.org/r/6f0a82a3-6948-20d9-580b-be1dbf415701@redhat.com Link: https://lkml.kernel.org/r/20230821160849.531668-1-david@redhat.com Link: https://lkml.kernel.org/r/20230821160849.531668-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 16:08:46 +00:00
page_swap_entry(page).val != entry.val))
mm: slightly clarify KSM logic in do_swap_page() Let's make it clearer that KSM might only have to copy a page in case we have a page in the swapcache, not if we allocated a fresh page and bypassed the swapcache. While at it, add a comment why this is usually necessary and merge the two swapcache conditions. [akpm@linux-foundation.org: fix comment, per David] Link: https://lkml.kernel.org/r/20220131162940.210846-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:37 +00:00
goto out_page;
/*
* KSM sometimes has to copy on read faults, for example, if
* page->index of !PageKSM() pages would be nonlinear inside the
* anon VMA -- PageKSM() is lost on actual swapout.
*/
folio = ksm_might_need_to_copy(folio, vma, vmf->address);
if (unlikely(!folio)) {
mm: slightly clarify KSM logic in do_swap_page() Let's make it clearer that KSM might only have to copy a page in case we have a page in the swapcache, not if we allocated a fresh page and bypassed the swapcache. While at it, add a comment why this is usually necessary and merge the two swapcache conditions. [akpm@linux-foundation.org: fix comment, per David] Link: https://lkml.kernel.org/r/20220131162940.210846-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:37 +00:00
ret = VM_FAULT_OOM;
folio = swapcache;
mm: slightly clarify KSM logic in do_swap_page() Let's make it clearer that KSM might only have to copy a page in case we have a page in the swapcache, not if we allocated a fresh page and bypassed the swapcache. While at it, add a comment why this is usually necessary and merge the two swapcache conditions. [akpm@linux-foundation.org: fix comment, per David] Link: https://lkml.kernel.org/r/20220131162940.210846-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:37 +00:00
goto out_page;
} else if (unlikely(folio == ERR_PTR(-EHWPOISON))) {
ret = VM_FAULT_HWPOISON;
folio = swapcache;
goto out_page;
mm: slightly clarify KSM logic in do_swap_page() Let's make it clearer that KSM might only have to copy a page in case we have a page in the swapcache, not if we allocated a fresh page and bypassed the swapcache. While at it, add a comment why this is usually necessary and merge the two swapcache conditions. [akpm@linux-foundation.org: fix comment, per David] Link: https://lkml.kernel.org/r/20220131162940.210846-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:37 +00:00
}
if (folio != swapcache)
page = folio_page(folio, 0);
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
/*
* If we want to map a page that's in the swapcache writable, we
* have to detect via the refcount if we're really the exclusive
* owner. Try removing the extra reference from the local LRU
* caches if required.
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
*/
if ((vmf->flags & FAULT_FLAG_WRITE) && folio == swapcache &&
!folio_test_ksm(folio) && !folio_test_lru(folio))
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
lru_add_drain();
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
}
folio_throttle_swaprate(folio, GFP_KERNEL);
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
/*
* Back out if somebody else already faulted in this pte.
*/
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address,
&vmf->ptl);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (unlikely(!vmf->pte || !pte_same(ptep_get(vmf->pte), vmf->orig_pte)))
goto out_nomap;
if (unlikely(!folio_test_uptodate(folio))) {
ret = VM_FAULT_SIGBUS;
goto out_nomap;
}
mm: swap: entirely map large folios found in swapcache When a large folio is found in the swapcache, the current implementation requires calling do_swap_page() nr_pages times, resulting in nr_pages page faults. This patch opts to map the entire large folio at once to minimize page faults. Additionally, redundant checks and early exits for ARM64 MTE restoring are removed. Link: https://lkml.kernel.org/r/20240529082824.150954-7-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:24 +00:00
nr_pages = 1;
page_idx = 0;
address = vmf->address;
ptep = vmf->pte;
if (folio_test_large(folio) && folio_test_swapcache(folio)) {
int nr = folio_nr_pages(folio);
unsigned long idx = folio_page_idx(folio, page);
unsigned long folio_start = address - idx * PAGE_SIZE;
unsigned long folio_end = folio_start + nr * PAGE_SIZE;
pte_t *folio_ptep;
pte_t folio_pte;
if (unlikely(folio_start < max(address & PMD_MASK, vma->vm_start)))
goto check_folio;
if (unlikely(folio_end > pmd_addr_end(address, vma->vm_end)))
goto check_folio;
folio_ptep = vmf->pte - idx;
folio_pte = ptep_get(folio_ptep);
if (!pte_same(folio_pte, pte_move_swp_offset(vmf->orig_pte, -idx)) ||
swap_pte_batch(folio_ptep, nr, folio_pte) != nr)
goto check_folio;
page_idx = idx;
address = folio_start;
ptep = folio_ptep;
nr_pages = nr;
entry = folio->swap;
page = &folio->page;
}
check_folio:
mm/page-flags: reuse PG_mappedtodisk as PG_anon_exclusive for PageAnon() pages The basic question we would like to have a reliable and efficient answer to is: is this anonymous page exclusive to a single process or might it be shared? We need that information for ordinary/single pages, hugetlb pages, and possibly each subpage of a THP. Introduce a way to mark an anonymous page as exclusive, with the ultimate goal of teaching our COW logic to not do "wrong COWs", whereby GUP pins lose consistency with the pages mapped into the page table, resulting in reported memory corruptions. Most pageflags already have semantics for anonymous pages, however, PG_mappedtodisk should never apply to pages in the swapcache, so let's reuse that flag. As PG_has_hwpoisoned also uses that flag on the second tail page of a compound page, convert it to PG_error instead, which is marked as PF_NO_TAIL, so never used for tail pages. Use custom page flag modification functions such that we can do additional sanity checks. The semantics we'll put into some kernel doc in the future are: " PG_anon_exclusive is *usually* only expressive in combination with a page table entry. Depending on the page table entry type it might store the following information: Is what's mapped via this page table entry exclusive to the single process and can be mapped writable without further checks? If not, it might be shared and we might have to COW. For now, we only expect PTE-mapped THPs to make use of PG_anon_exclusive in subpages. For other anonymous compound folios (i.e., hugetlb), only the head page is logically mapped and holds this information. For example, an exclusive, PMD-mapped THP only has PG_anon_exclusive set on the head page. When replacing the PMD by a page table full of PTEs, PG_anon_exclusive, if set on the head page, will be set on all tail pages accordingly. Note that converting from a PTE-mapping to a PMD mapping using the same compound page is currently not possible and consequently doesn't require care. If GUP wants to take a reliable pin (FOLL_PIN) on an anonymous page, it should only pin if the relevant PG_anon_exclusive is set. In that case, the pin will be fully reliable and stay consistent with the pages mapped into the page table, as the bit cannot get cleared (e.g., by fork(), KSM) while the page is pinned. For anonymous pages that are mapped R/W, PG_anon_exclusive can be assumed to always be set because such pages cannot possibly be shared. The page table lock protecting the page table entry is the primary synchronization mechanism for PG_anon_exclusive; GUP-fast that does not take the PT lock needs special care when trying to clear the flag. Page table entry types and PG_anon_exclusive: * Present: PG_anon_exclusive applies. * Swap: the information is lost. PG_anon_exclusive was cleared. * Migration: the entry holds this information instead. PG_anon_exclusive was cleared. * Device private: PG_anon_exclusive applies. * Device exclusive: PG_anon_exclusive applies. * HW Poison: PG_anon_exclusive is stale and not changed. If the page may be pinned (FOLL_PIN), clearing PG_anon_exclusive is not allowed and the flag will stick around until the page is freed and folio->mapping is cleared. " We won't be clearing PG_anon_exclusive on destructive unmapping (i.e., zapping) of page table entries, page freeing code will handle that when also invalidate page->mapping to not indicate PageAnon() anymore. Letting information about exclusivity stick around will be an important property when adding sanity checks to unpinning code. Note that we properly clear the flag in free_pages_prepare() via PAGE_FLAGS_CHECK_AT_PREP for each individual subpage of a compound page, so there is no need to manually clear the flag. Link: https://lkml.kernel.org/r/20220428083441.37290-12-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
/*
* PG_anon_exclusive reuses PG_mappedtodisk for anon pages. A swap pte
* must never point at an anonymous page in the swapcache that is
* PG_anon_exclusive. Sanity check that this holds and especially, that
* no filesystem set PG_mappedtodisk on a page in the swapcache. Sanity
* check after taking the PT lock and making sure that nobody
* concurrently faulted in this page and set PG_anon_exclusive.
*/
BUG_ON(!folio_test_anon(folio) && folio_test_mappedtodisk(folio));
BUG_ON(folio_test_anon(folio) && PageAnonExclusive(page));
mm/page-flags: reuse PG_mappedtodisk as PG_anon_exclusive for PageAnon() pages The basic question we would like to have a reliable and efficient answer to is: is this anonymous page exclusive to a single process or might it be shared? We need that information for ordinary/single pages, hugetlb pages, and possibly each subpage of a THP. Introduce a way to mark an anonymous page as exclusive, with the ultimate goal of teaching our COW logic to not do "wrong COWs", whereby GUP pins lose consistency with the pages mapped into the page table, resulting in reported memory corruptions. Most pageflags already have semantics for anonymous pages, however, PG_mappedtodisk should never apply to pages in the swapcache, so let's reuse that flag. As PG_has_hwpoisoned also uses that flag on the second tail page of a compound page, convert it to PG_error instead, which is marked as PF_NO_TAIL, so never used for tail pages. Use custom page flag modification functions such that we can do additional sanity checks. The semantics we'll put into some kernel doc in the future are: " PG_anon_exclusive is *usually* only expressive in combination with a page table entry. Depending on the page table entry type it might store the following information: Is what's mapped via this page table entry exclusive to the single process and can be mapped writable without further checks? If not, it might be shared and we might have to COW. For now, we only expect PTE-mapped THPs to make use of PG_anon_exclusive in subpages. For other anonymous compound folios (i.e., hugetlb), only the head page is logically mapped and holds this information. For example, an exclusive, PMD-mapped THP only has PG_anon_exclusive set on the head page. When replacing the PMD by a page table full of PTEs, PG_anon_exclusive, if set on the head page, will be set on all tail pages accordingly. Note that converting from a PTE-mapping to a PMD mapping using the same compound page is currently not possible and consequently doesn't require care. If GUP wants to take a reliable pin (FOLL_PIN) on an anonymous page, it should only pin if the relevant PG_anon_exclusive is set. In that case, the pin will be fully reliable and stay consistent with the pages mapped into the page table, as the bit cannot get cleared (e.g., by fork(), KSM) while the page is pinned. For anonymous pages that are mapped R/W, PG_anon_exclusive can be assumed to always be set because such pages cannot possibly be shared. The page table lock protecting the page table entry is the primary synchronization mechanism for PG_anon_exclusive; GUP-fast that does not take the PT lock needs special care when trying to clear the flag. Page table entry types and PG_anon_exclusive: * Present: PG_anon_exclusive applies. * Swap: the information is lost. PG_anon_exclusive was cleared. * Migration: the entry holds this information instead. PG_anon_exclusive was cleared. * Device private: PG_anon_exclusive applies. * Device exclusive: PG_anon_exclusive applies. * HW Poison: PG_anon_exclusive is stale and not changed. If the page may be pinned (FOLL_PIN), clearing PG_anon_exclusive is not allowed and the flag will stick around until the page is freed and folio->mapping is cleared. " We won't be clearing PG_anon_exclusive on destructive unmapping (i.e., zapping) of page table entries, page freeing code will handle that when also invalidate page->mapping to not indicate PageAnon() anymore. Letting information about exclusivity stick around will be an important property when adding sanity checks to unpinning code. Note that we properly clear the flag in free_pages_prepare() via PAGE_FLAGS_CHECK_AT_PREP for each individual subpage of a compound page, so there is no need to manually clear the flag. Link: https://lkml.kernel.org/r/20220428083441.37290-12-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
/*
* Check under PT lock (to protect against concurrent fork() sharing
* the swap entry concurrently) for certainly exclusive pages.
*/
if (!folio_test_ksm(folio)) {
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
exclusive = pte_swp_exclusive(vmf->orig_pte);
if (folio != swapcache) {
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
/*
* We have a fresh page that is not exposed to the
* swapcache -> certainly exclusive.
*/
exclusive = true;
} else if (exclusive && folio_test_writeback(folio) &&
data_race(si->flags & SWP_STABLE_WRITES)) {
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
/*
* This is tricky: not all swap backends support
* concurrent page modifications while under writeback.
*
* So if we stumble over such a page in the swapcache
* we must not set the page exclusive, otherwise we can
* map it writable without further checks and modify it
* while still under writeback.
*
* For these problematic swap backends, simply drop the
* exclusive marker: this is perfectly fine as we start
* writeback only if we fully unmapped the page and
* there are no unexpected references on the page after
* unmapping succeeded. After fully unmapped, no
* further GUP references (FOLL_GET and FOLL_PIN) can
* appear, so dropping the exclusive marker and mapping
* it only R/O is fine.
*/
exclusive = false;
}
}
/*
* Some architectures may have to restore extra metadata to the page
* when reading from swap. This metadata may be indexed by swap entry
* so this must be called before swap_free().
*/
arm64: mm: swap: support THP_SWAP on hardware with MTE Commit d0637c505f8a1 ("arm64: enable THP_SWAP for arm64") brings up THP_SWAP on ARM64, but it doesn't enable THP_SWP on hardware with MTE as the MTE code works with the assumption tags save/restore is always handling a folio with only one page. The limitation should be removed as more and more ARM64 SoCs have this feature. Co-existence of MTE and THP_SWAP becomes more and more important. This patch makes MTE tags saving support large folios, then we don't need to split large folios into base pages for swapping out on ARM64 SoCs with MTE any more. arch_prepare_to_swap() should take folio rather than page as parameter because we support THP swap-out as a whole. It saves tags for all pages in a large folio. As now we are restoring tags based-on folio, in arch_swap_restore(), we may increase some extra loops and early-exitings while refaulting a large folio which is still in swapcache in do_swap_page(). In case a large folio has nr pages, do_swap_page() will only set the PTE of the particular page which is causing the page fault. Thus do_swap_page() runs nr times, and each time, arch_swap_restore() will loop nr times for those subpages in the folio. So right now the algorithmic complexity becomes O(nr^2). Once we support mapping large folios in do_swap_page(), extra loops and early-exitings will decrease while not being completely removed as a large folio might get partially tagged in corner cases such as, 1. a large folio in swapcache can be partially unmapped, thus, MTE tags for the unmapped pages will be invalidated; 2. users might use mprotect() to set MTEs on a part of a large folio. arch_thp_swp_supported() is dropped since ARM64 MTE was the only one who needed it. Link: https://lkml.kernel.org/r/20240322114136.61386-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-22 11:41:36 +00:00
arch_swap_restore(folio_swap(entry, folio), folio);
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 02:08:00 +00:00
/*
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
* Remove the swap entry and conditionally try to free up the swapcache.
* We're already holding a reference on the page but haven't mapped it
* yet.
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 02:08:00 +00:00
*/
mm: swap: entirely map large folios found in swapcache When a large folio is found in the swapcache, the current implementation requires calling do_swap_page() nr_pages times, resulting in nr_pages page faults. This patch opts to map the entire large folio at once to minimize page faults. Additionally, redundant checks and early exits for ARM64 MTE restoring are removed. Link: https://lkml.kernel.org/r/20240529082824.150954-7-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:24 +00:00
swap_free_nr(entry, nr_pages);
if (should_try_to_free_swap(folio, vma, vmf->flags))
folio_free_swap(folio);
mm: swap: entirely map large folios found in swapcache When a large folio is found in the swapcache, the current implementation requires calling do_swap_page() nr_pages times, resulting in nr_pages page faults. This patch opts to map the entire large folio at once to minimize page faults. Additionally, redundant checks and early exits for ARM64 MTE restoring are removed. Link: https://lkml.kernel.org/r/20240529082824.150954-7-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:24 +00:00
add_mm_counter(vma->vm_mm, MM_ANONPAGES, nr_pages);
add_mm_counter(vma->vm_mm, MM_SWAPENTS, -nr_pages);
pte = mk_pte(page, vma->vm_page_prot);
mm: swap: reuse exclusive folio directly instead of wp page faults After swapping out, we perform a swap-in operation. If we first read and then write, we encounter a major fault in do_swap_page for reading, along with additional minor faults in do_wp_page for writing. However, the latter appears to be unnecessary and inefficient. Instead, we can directly reuse in do_swap_page and completely eliminate the need for do_wp_page. This patch achieves that optimization specifically for exclusive folios. The following microbenchmark demonstrates the significant reduction in minor faults. #define DATA_SIZE (2UL * 1024 * 1024) #define PAGE_SIZE (4UL * 1024) static void *read_write_data(char *addr) { char tmp; for (int i = 0; i < DATA_SIZE; i += PAGE_SIZE) { tmp = *(volatile char *)(addr + i); *(volatile char *)(addr + i) = tmp; } } int main(int argc, char **argv) { struct rusage ru; char *addr = mmap(NULL, DATA_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); memset(addr, 0x11, DATA_SIZE); do { long old_ru_minflt, old_ru_majflt; long new_ru_minflt, new_ru_majflt; madvise(addr, DATA_SIZE, MADV_PAGEOUT); getrusage(RUSAGE_SELF, &ru); old_ru_minflt = ru.ru_minflt; old_ru_majflt = ru.ru_majflt; read_write_data(addr); getrusage(RUSAGE_SELF, &ru); new_ru_minflt = ru.ru_minflt; new_ru_majflt = ru.ru_majflt; printf("minor faults:%ld major faults:%ld\n", new_ru_minflt - old_ru_minflt, new_ru_majflt - old_ru_majflt); } while(0); return 0; } w/o patch, / # ~/a.out minor faults:512 major faults:512 w/ patch, / # ~/a.out minor faults:0 major faults:512 Minor faults decrease to 0! Link: https://lkml.kernel.org/r/20240602004502.26895-1-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-02 00:45:02 +00:00
if (pte_swp_soft_dirty(vmf->orig_pte))
pte = pte_mksoft_dirty(pte);
if (pte_swp_uffd_wp(vmf->orig_pte))
pte = pte_mkuffd_wp(pte);
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
/*
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
* Same logic as in do_wp_page(); however, optimize for pages that are
* certainly not shared either because we just allocated them without
* exposing them to the swapcache or because the swap entry indicates
* exclusivity.
mm: streamline COW logic in do_swap_page() Currently we have a different COW logic when: * triggering a read-fault to swapin first and then trigger a write-fault -> do_swap_page() + do_wp_page() * triggering a write-fault to swapin -> do_swap_page() + do_wp_page() only if we fail reuse in do_swap_page() The COW logic in do_swap_page() is different than our reuse logic in do_wp_page(). The COW logic in do_wp_page() -- page_count() == 1 -- makes currently sure that we certainly don't have a remaining reference, e.g., via GUP, on the target page we want to reuse: if there is any unexpected reference, we have to copy to avoid information leaks. As do_swap_page() behaves differently, in environments with swap enabled we can currently have an unintended information leak from the parent to the child, similar as known from CVE-2020-29374: 1. Parent writes to anonymous page -> Page is mapped writable and modified 2. Page is swapped out -> Page is unmapped and replaced by swap entry 3. fork() -> Swap entries are copied to child 4. Child pins page R/O -> Page is mapped R/O into child 5. Child unmaps page -> Child still holds GUP reference 6. Parent writes to page -> Page is reused in do_swap_page() -> Child can observe changes Exchanging 2. and 3. should have the same effect. Let's apply the same COW logic as in do_wp_page(), conditionally trying to remove the page from the swapcache after freeing the swap entry, however, before actually mapping our page. We can change the order now that we use try_to_free_swap(), which doesn't care about the mapcount, instead of reuse_swap_page(). To handle references from the LRU pagevecs, conditionally drain the local LRU pagevecs when required, however, don't consider the page_count() when deciding whether to drain to keep it simple for now. Link: https://lkml.kernel.org/r/20220131162940.210846-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:13:40 +00:00
*/
if (!folio_test_ksm(folio) &&
(exclusive || folio_ref_count(folio) == 1)) {
mm: swap: reuse exclusive folio directly instead of wp page faults After swapping out, we perform a swap-in operation. If we first read and then write, we encounter a major fault in do_swap_page for reading, along with additional minor faults in do_wp_page for writing. However, the latter appears to be unnecessary and inefficient. Instead, we can directly reuse in do_swap_page and completely eliminate the need for do_wp_page. This patch achieves that optimization specifically for exclusive folios. The following microbenchmark demonstrates the significant reduction in minor faults. #define DATA_SIZE (2UL * 1024 * 1024) #define PAGE_SIZE (4UL * 1024) static void *read_write_data(char *addr) { char tmp; for (int i = 0; i < DATA_SIZE; i += PAGE_SIZE) { tmp = *(volatile char *)(addr + i); *(volatile char *)(addr + i) = tmp; } } int main(int argc, char **argv) { struct rusage ru; char *addr = mmap(NULL, DATA_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); memset(addr, 0x11, DATA_SIZE); do { long old_ru_minflt, old_ru_majflt; long new_ru_minflt, new_ru_majflt; madvise(addr, DATA_SIZE, MADV_PAGEOUT); getrusage(RUSAGE_SELF, &ru); old_ru_minflt = ru.ru_minflt; old_ru_majflt = ru.ru_majflt; read_write_data(addr); getrusage(RUSAGE_SELF, &ru); new_ru_minflt = ru.ru_minflt; new_ru_majflt = ru.ru_majflt; printf("minor faults:%ld major faults:%ld\n", new_ru_minflt - old_ru_minflt, new_ru_majflt - old_ru_majflt); } while(0); return 0; } w/o patch, / # ~/a.out minor faults:512 major faults:512 w/ patch, / # ~/a.out minor faults:0 major faults:512 Minor faults decrease to 0! Link: https://lkml.kernel.org/r/20240602004502.26895-1-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-02 00:45:02 +00:00
if ((vma->vm_flags & VM_WRITE) && !userfaultfd_pte_wp(vma, pte) &&
!pte_needs_soft_dirty_wp(vma, pte)) {
mm: swap: reuse exclusive folio directly instead of wp page faults After swapping out, we perform a swap-in operation. If we first read and then write, we encounter a major fault in do_swap_page for reading, along with additional minor faults in do_wp_page for writing. However, the latter appears to be unnecessary and inefficient. Instead, we can directly reuse in do_swap_page and completely eliminate the need for do_wp_page. This patch achieves that optimization specifically for exclusive folios. The following microbenchmark demonstrates the significant reduction in minor faults. #define DATA_SIZE (2UL * 1024 * 1024) #define PAGE_SIZE (4UL * 1024) static void *read_write_data(char *addr) { char tmp; for (int i = 0; i < DATA_SIZE; i += PAGE_SIZE) { tmp = *(volatile char *)(addr + i); *(volatile char *)(addr + i) = tmp; } } int main(int argc, char **argv) { struct rusage ru; char *addr = mmap(NULL, DATA_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); memset(addr, 0x11, DATA_SIZE); do { long old_ru_minflt, old_ru_majflt; long new_ru_minflt, new_ru_majflt; madvise(addr, DATA_SIZE, MADV_PAGEOUT); getrusage(RUSAGE_SELF, &ru); old_ru_minflt = ru.ru_minflt; old_ru_majflt = ru.ru_majflt; read_write_data(addr); getrusage(RUSAGE_SELF, &ru); new_ru_minflt = ru.ru_minflt; new_ru_majflt = ru.ru_majflt; printf("minor faults:%ld major faults:%ld\n", new_ru_minflt - old_ru_minflt, new_ru_majflt - old_ru_majflt); } while(0); return 0; } w/o patch, / # ~/a.out minor faults:512 major faults:512 w/ patch, / # ~/a.out minor faults:0 major faults:512 Minor faults decrease to 0! Link: https://lkml.kernel.org/r/20240602004502.26895-1-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-02 00:45:02 +00:00
pte = pte_mkwrite(pte, vma);
if (vmf->flags & FAULT_FLAG_WRITE) {
pte = pte_mkdirty(pte);
vmf->flags &= ~FAULT_FLAG_WRITE;
}
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
}
rmap_flags |= RMAP_EXCLUSIVE;
}
mm: swap: entirely map large folios found in swapcache When a large folio is found in the swapcache, the current implementation requires calling do_swap_page() nr_pages times, resulting in nr_pages page faults. This patch opts to map the entire large folio at once to minimize page faults. Additionally, redundant checks and early exits for ARM64 MTE restoring are removed. Link: https://lkml.kernel.org/r/20240529082824.150954-7-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:24 +00:00
folio_ref_add(folio, nr_pages - 1);
flush_icache_pages(vma, page, nr_pages);
vmf->orig_pte = pte_advance_pfn(pte, page_idx);
/* ksm created a completely new copy */
if (unlikely(folio != swapcache && swapcache)) {
mm: extend rmap flags arguments for folio_add_new_anon_rmap Patch series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()", v2. This patchset is preparatory work for mTHP swapin. folio_add_new_anon_rmap() assumes that new anon rmaps are always exclusive. However, this assumption doesn’t hold true for cases like do_swap_page(), where a new anon might be added to the swapcache and is not necessarily exclusive. The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to handle both exclusive and non-exclusive new anon folios. The do_swap_page() function is updated to use this extended API with rmap flags. Consequently, all new anon folios now consistently use folio_add_new_anon_rmap(). The special case for !folio_test_anon() in __folio_add_anon_rmap() can be safely removed. In conclusion, new anon folios always use folio_add_new_anon_rmap(), regardless of exclusivity. Old anon folios continue to use __folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and folio_add_anon_rmap_ptes(). This patch (of 3): In the case of a swap-in, a new anonymous folio is not necessarily exclusive. This patch updates the rmap flags to allow a new anonymous folio to be treated as either exclusive or non-exclusive. To maintain the existing behavior, we always use EXCLUSIVE as the default setting. [akpm@linux-foundation.org: cleanup and constifications per David and akpm] [v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()] Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com [v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap] Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: Shuai Yuan <yuanshuai@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-17 23:11:35 +00:00
folio_add_new_anon_rmap(folio, vma, address, RMAP_EXCLUSIVE);
folio_add_lru_vma(folio, vma);
mm: use folio_add_new_anon_rmap() if folio_test_anon(folio)==false For the !folio_test_anon(folio) case, we can now invoke folio_add_new_anon_rmap() with the rmap flags set to either EXCLUSIVE or non-EXCLUSIVE. This action will suppress the VM_WARN_ON_FOLIO check within __folio_add_anon_rmap() while initiating the process of bringing up mTHP swapin. static __always_inline void __folio_add_anon_rmap(struct folio *folio, struct page *page, int nr_pages, struct vm_area_struct *vma, unsigned long address, rmap_t flags, enum rmap_level level) { ... if (unlikely(!folio_test_anon(folio))) { VM_WARN_ON_FOLIO(folio_test_large(folio) && level != RMAP_LEVEL_PMD, folio); } ... } It also improves the code's readability. Currently, all new anonymous folios calling folio_add_anon_rmap_ptes() are order-0. This ensures that new folios cannot be partially exclusive; they are either entirely exclusive or entirely shared. A useful comment from Hugh's fix: : Commit "mm: use folio_add_new_anon_rmap() if folio_test_anon(folio)== : false" has extended folio_add_new_anon_rmap() to use on non-exclusive : folios, already visible to others in swap cache and on LRU. : : That renders its non-atomic __folio_set_swapbacked() unsafe: it risks : overwriting concurrent atomic operations on folio->flags, losing bits : added or restoring bits cleared. Since it's only used in this risky way : when folio_test_locked and !folio_test_anon, many such races are excluded; : but, for example, isolations by folio_test_clear_lru() are vulnerable, and : setting or clearing active. : : It could just use the atomic folio_set_swapbacked(); but this function : does try to avoid atomics where it can, so use a branch instead: just : avoid setting swapbacked when it is already set, that is good enough. : (Swapbacked is normally stable once set: lazyfree can undo it, but only : later, when found anon in a page table.) : : This fixes a lot of instability under compaction and swapping loads: : assorted "Bad page"s, VM_BUG_ON_FOLIO()s, apparently even page double : frees - though I've not worked out what races could lead to the latter. [akpm@linux-foundation.org: comment fixes, per David and akpm] [v-songbaohua@oppo.com: lock the folio to avoid race] Link: https://lkml.kernel.org/r/20240622032002.53033-1-21cnbao@gmail.com [hughd@google.com: folio_add_new_anon_rmap() careful __folio_set_swapbacked()] Link: https://lkml.kernel.org/r/f3599b1d-8323-0dc5-e9e0-fdb3cfc3dd5a@google.com Link: https://lkml.kernel.org/r/20240617231137.80726-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: Shuai Yuan <yuanshuai@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-17 23:11:36 +00:00
} else if (!folio_test_anon(folio)) {
/*
* We currently only expect small !anon folios, which are either
* fully exclusive or fully shared. If we ever get large folios
* here, we have to be careful.
*/
VM_WARN_ON_ONCE(folio_test_large(folio));
VM_WARN_ON_FOLIO(!folio_test_locked(folio), folio);
folio_add_new_anon_rmap(folio, vma, address, rmap_flags);
} else {
mm: swap: entirely map large folios found in swapcache When a large folio is found in the swapcache, the current implementation requires calling do_swap_page() nr_pages times, resulting in nr_pages page faults. This patch opts to map the entire large folio at once to minimize page faults. Additionally, redundant checks and early exits for ARM64 MTE restoring are removed. Link: https://lkml.kernel.org/r/20240529082824.150954-7-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:24 +00:00
folio_add_anon_rmap_ptes(folio, page, nr_pages, vma, address,
rmap_flags);
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:19:20 +00:00
}
VM_BUG_ON(!folio_test_anon(folio) ||
(pte_write(pte) && !PageAnonExclusive(page)));
mm: swap: entirely map large folios found in swapcache When a large folio is found in the swapcache, the current implementation requires calling do_swap_page() nr_pages times, resulting in nr_pages page faults. This patch opts to map the entire large folio at once to minimize page faults. Additionally, redundant checks and early exits for ARM64 MTE restoring are removed. Link: https://lkml.kernel.org/r/20240529082824.150954-7-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:24 +00:00
set_ptes(vma->vm_mm, address, ptep, pte, nr_pages);
arch_do_swap_page_nr(vma->vm_mm, vma, address,
pte, pte, nr_pages);
mm: change page type prior to adding page table entry Patch series "page table check", v3. Ensure that some memory corruptions are prevented by checking at the time of insertion of entries into user page tables that there is no illegal sharing. We have recently found a problem [1] that existed in kernel since 4.14. The problem was caused by broken page ref count and led to memory leaking from one process into another. The problem was accidentally detected by studying a dump of one process and noticing that one page contains memory that should not belong to this process. There are some other page->_refcount related problems that were recently fixed: [2], [3] which potentially could also lead to illegal sharing. In addition to hardening refcount [4] itself, this work is an attempt to prevent this class of memory corruption issues. It uses a simple state machine that is independent from regular MM logic to check for illegal sharing at time pages are inserted and removed from page tables. [1] https://lore.kernel.org/all/xr9335nxwc5y.fsf@gthelen2.svl.corp.google.com [2] https://lore.kernel.org/all/1582661774-30925-2-git-send-email-akaher@vmware.com [3] https://lore.kernel.org/all/20210622021423.154662-3-mike.kravetz@oracle.com [4] https://lore.kernel.org/all/20211221150140.988298-1-pasha.tatashin@soleen.com This patch (of 4): There are a few places where we first update the entry in the user page table, and later change the struct page to indicate that this is anonymous or file page. In most places, however, we first configure the page metadata and then insert entries into the page table. Page table check, will use the information from struct page to verify the type of entry is inserted. Change the order in all places to first update struct page, and later to update page table. This means that we first do calls that may change the type of page (anon or file): page_move_anon_rmap page_add_anon_rmap do_page_add_anon_rmap page_add_new_anon_rmap page_add_file_rmap hugepage_add_anon_rmap hugepage_add_new_anon_rmap And after that do calls that add entries to the page table: set_huge_pte_at set_pte_at Link: https://lkml.kernel.org/r/20211221154650.1047963-1-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20211221154650.1047963-2-pasha.tatashin@soleen.com Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Turner <pjt@google.com> Cc: Wei Xu <weixugc@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:06:29 +00:00
folio_unlock(folio);
if (folio != swapcache && swapcache) {
/*
* Hold the lock to avoid the swap entry to be reused
* until we take the PT lock for the pte_same() check
* (to avoid false positives from pte_same). For
* further safety release the lock after the swap_free
* so that the swap count won't change under a
* parallel locked swapcache.
*/
folio_unlock(swapcache);
folio_put(swapcache);
}
if (vmf->flags & FAULT_FLAG_WRITE) {
ret |= do_wp_page(vmf);
if (ret & VM_FAULT_ERROR)
ret &= VM_FAULT_ERROR;
goto out;
}
/* No need to invalidate - it was non-present before */
mm: swap: entirely map large folios found in swapcache When a large folio is found in the swapcache, the current implementation requires calling do_swap_page() nr_pages times, resulting in nr_pages page faults. This patch opts to map the entire large folio at once to minimize page faults. Additionally, redundant checks and early exits for ARM64 MTE restoring are removed. Link: https://lkml.kernel.org/r/20240529082824.150954-7-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:24 +00:00
update_mmu_cache_range(vmf, vma, address, ptep, nr_pages);
unlock:
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (vmf->pte)
pte_unmap_unlock(vmf->pte, vmf->ptl);
out:
mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" <ying.huang@intel.com> Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/ Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <21cnbao@gmail.com> Cc: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-06 18:25:59 +00:00
/* Clear the swap cache pin for direct swapin after PTL unlock */
if (need_clear_cache)
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
swapcache_clear(si, entry, 1);
swap: fix do_swap_page() race with swapoff When I was investigating the swap code, I found the below possible race window: CPU 1 CPU 2 ----- ----- do_swap_page if (data_race(si->flags & SWP_SYNCHRONOUS_IO) swap_readpage if (data_race(sis->flags & SWP_FS_OPS)) { swapoff .. p->swap_file = NULL; .. struct file *swap_file = sis->swap_file; struct address_space *mapping = swap_file->f_mapping;[oops!] Note that for the pages that are swapped in through swap cache, this isn't an issue. Because the page is locked, and the swap entry will be marked with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been unlocked. Fix this race by using get/put_swap_device() to guard against concurrent swapoff. Link: https://lkml.kernel.org/r/20210426123316.806267-3-linmiaohe@huawei.com Fixes: 0bcac06f27d7 ("mm,swap: skip swapcache for swapin of synchronous device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:50 +00:00
if (si)
put_swap_device(si);
return ret;
out_nomap:
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (vmf->pte)
pte_unmap_unlock(vmf->pte, vmf->ptl);
out_page:
folio_unlock(folio);
out_release:
folio_put(folio);
if (folio != swapcache && swapcache) {
folio_unlock(swapcache);
folio_put(swapcache);
}
mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" <ying.huang@intel.com> Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/ Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <21cnbao@gmail.com> Cc: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-06 18:25:59 +00:00
if (need_clear_cache)
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
swapcache_clear(si, entry, 1);
swap: fix do_swap_page() race with swapoff When I was investigating the swap code, I found the below possible race window: CPU 1 CPU 2 ----- ----- do_swap_page if (data_race(si->flags & SWP_SYNCHRONOUS_IO) swap_readpage if (data_race(sis->flags & SWP_FS_OPS)) { swapoff .. p->swap_file = NULL; .. struct file *swap_file = sis->swap_file; struct address_space *mapping = swap_file->f_mapping;[oops!] Note that for the pages that are swapped in through swap cache, this isn't an issue. Because the page is locked, and the swap entry will be marked with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been unlocked. Fix this race by using get/put_swap_device() to guard against concurrent swapoff. Link: https://lkml.kernel.org/r/20210426123316.806267-3-linmiaohe@huawei.com Fixes: 0bcac06f27d7 ("mm,swap: skip swapcache for swapin of synchronous device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:50 +00:00
if (si)
put_swap_device(si);
return ret;
}
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
static bool pte_range_none(pte_t *pte, int nr_pages)
{
int i;
for (i = 0; i < nr_pages; i++) {
if (!pte_none(ptep_get_lockless(pte + i)))
return false;
}
return true;
}
static struct folio *alloc_anon_folio(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
mm: memory: move mem_cgroup_charge() into alloc_anon_folio() The GFP flags from vma_thp_gfp_mask() according to user configuration only used for large folio allocation but not for memory cgroup charge, and GFP_KERNEL is used for both order-0 and large order folio when memory cgroup charge at present. However, mem_cgroup_charge() uses the GFP flags in a fairly sophisticated way. In addition to checking gfpflags_allow_blocking(), it pays attention to __GFP_NORETRY and __GFP_RETRY_MAYFAIL to ensure that processes within this memcg do not exceed their quotas. So we'd better to move mem_cgroup_charge() into alloc_anon_folio(), 1) it will make us to allocate as much as possible large order folio, because we could try the next order if mem_cgroup_charge() fails, although the memcg's memory usage is close to its limits. 2) using same GFP flags for allocation and charge is to be consistent with PMD THP firstly, in addition, according to GFP flag returned from vma_thp_gfp_mask(), GFP_TRANSHUGE_LIGHT could make us skip direct reclaim, _GFP_NORETRY will make us skip mem_cgroup_oom() and won't trigger memory cgroup oom from large order(order <= COSTLY_ORDER) folio charging. Link: https://lkml.kernel.org/r/20240122011612.501029-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240117103954.2756050-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-17 10:39:54 +00:00
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
unsigned long orders;
struct folio *folio;
unsigned long addr;
pte_t *pte;
gfp_t gfp;
int order;
/*
* If uffd is active for the vma we need per-page fault fidelity to
* maintain the uffd semantics.
*/
if (unlikely(userfaultfd_armed(vma)))
goto fallback;
/*
* Get a list of all the (large) orders below PMD_ORDER that are enabled
* for this vma. Then filter out the orders that can't be allocated over
* the faulting address and still be fully contained in the vma.
*/
orders = thp_vma_allowable_orders(vma, vma->vm_flags,
TVA_IN_PF | TVA_ENFORCE_SYSFS, BIT(PMD_ORDER) - 1);
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
orders = thp_vma_suitable_orders(vma, vmf->address, orders);
if (!orders)
goto fallback;
pte = pte_offset_map(vmf->pmd, vmf->address & PMD_MASK);
if (!pte)
return ERR_PTR(-EAGAIN);
/*
* Find the highest order where the aligned range is completely
* pte_none(). Note that all remaining orders will be completely
* pte_none().
*/
order = highest_order(orders);
while (orders) {
addr = ALIGN_DOWN(vmf->address, PAGE_SIZE << order);
if (pte_range_none(pte + pte_index(addr), 1 << order))
break;
order = next_order(&orders, order);
}
pte_unmap(pte);
if (!orders)
goto fallback;
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
/* Try allocating the highest of the remaining orders. */
gfp = vma_thp_gfp_mask(vma);
while (orders) {
addr = ALIGN_DOWN(vmf->address, PAGE_SIZE << order);
folio = vma_alloc_folio(gfp, order, vma, addr, true);
if (folio) {
mm: memory: move mem_cgroup_charge() into alloc_anon_folio() The GFP flags from vma_thp_gfp_mask() according to user configuration only used for large folio allocation but not for memory cgroup charge, and GFP_KERNEL is used for both order-0 and large order folio when memory cgroup charge at present. However, mem_cgroup_charge() uses the GFP flags in a fairly sophisticated way. In addition to checking gfpflags_allow_blocking(), it pays attention to __GFP_NORETRY and __GFP_RETRY_MAYFAIL to ensure that processes within this memcg do not exceed their quotas. So we'd better to move mem_cgroup_charge() into alloc_anon_folio(), 1) it will make us to allocate as much as possible large order folio, because we could try the next order if mem_cgroup_charge() fails, although the memcg's memory usage is close to its limits. 2) using same GFP flags for allocation and charge is to be consistent with PMD THP firstly, in addition, according to GFP flag returned from vma_thp_gfp_mask(), GFP_TRANSHUGE_LIGHT could make us skip direct reclaim, _GFP_NORETRY will make us skip mem_cgroup_oom() and won't trigger memory cgroup oom from large order(order <= COSTLY_ORDER) folio charging. Link: https://lkml.kernel.org/r/20240122011612.501029-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240117103954.2756050-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-17 10:39:54 +00:00
if (mem_cgroup_charge(folio, vma->vm_mm, gfp)) {
mm: add per-order mTHP anon_fault_alloc and anon_fault_fallback counters Patch series "mm: add per-order mTHP alloc and swpout counters", v6. The patchset introduces a framework to facilitate mTHP counters, starting with the allocation and swap-out counters. Currently, only four new nodes are appended to the stats directory for each mTHP size. /sys/kernel/mm/transparent_hugepage/hugepages-<size>/stats anon_fault_alloc anon_fault_fallback anon_fault_fallback_charge anon_swpout anon_swpout_fallback These nodes are crucial for us to monitor the fragmentation levels of both the buddy system and the swap partitions. In the future, we may consider adding additional nodes for further insights. This patch (of 4): Profiling a system blindly with mTHP has become challenging due to the lack of visibility into its operations. Presenting the success rate of mTHP allocations appears to be pressing need. Recently, I've been experiencing significant difficulty debugging performance improvements and regressions without these figures. It's crucial for us to understand the true effectiveness of mTHP in real-world scenarios, especially in systems with fragmented memory. This patch establishes the framework for per-order mTHP counters. It begins by introducing the anon_fault_alloc and anon_fault_fallback counters. Additionally, to maintain consistency with thp_fault_fallback_charge in /proc/vmstat, this patch also tracks anon_fault_fallback_charge when mem_cgroup_charge fails for mTHP. Incorporating additional counters should now be straightforward as well. Link: https://lkml.kernel.org/r/20240412114858.407208-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240412114858.407208-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-12 11:48:55 +00:00
count_mthp_stat(order, MTHP_STAT_ANON_FAULT_FALLBACK_CHARGE);
mm: memory: move mem_cgroup_charge() into alloc_anon_folio() The GFP flags from vma_thp_gfp_mask() according to user configuration only used for large folio allocation but not for memory cgroup charge, and GFP_KERNEL is used for both order-0 and large order folio when memory cgroup charge at present. However, mem_cgroup_charge() uses the GFP flags in a fairly sophisticated way. In addition to checking gfpflags_allow_blocking(), it pays attention to __GFP_NORETRY and __GFP_RETRY_MAYFAIL to ensure that processes within this memcg do not exceed their quotas. So we'd better to move mem_cgroup_charge() into alloc_anon_folio(), 1) it will make us to allocate as much as possible large order folio, because we could try the next order if mem_cgroup_charge() fails, although the memcg's memory usage is close to its limits. 2) using same GFP flags for allocation and charge is to be consistent with PMD THP firstly, in addition, according to GFP flag returned from vma_thp_gfp_mask(), GFP_TRANSHUGE_LIGHT could make us skip direct reclaim, _GFP_NORETRY will make us skip mem_cgroup_oom() and won't trigger memory cgroup oom from large order(order <= COSTLY_ORDER) folio charging. Link: https://lkml.kernel.org/r/20240122011612.501029-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240117103954.2756050-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-17 10:39:54 +00:00
folio_put(folio);
goto next;
}
folio_throttle_swaprate(folio, gfp);
folio_zero_user(folio, vmf->address);
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
return folio;
}
mm: memory: move mem_cgroup_charge() into alloc_anon_folio() The GFP flags from vma_thp_gfp_mask() according to user configuration only used for large folio allocation but not for memory cgroup charge, and GFP_KERNEL is used for both order-0 and large order folio when memory cgroup charge at present. However, mem_cgroup_charge() uses the GFP flags in a fairly sophisticated way. In addition to checking gfpflags_allow_blocking(), it pays attention to __GFP_NORETRY and __GFP_RETRY_MAYFAIL to ensure that processes within this memcg do not exceed their quotas. So we'd better to move mem_cgroup_charge() into alloc_anon_folio(), 1) it will make us to allocate as much as possible large order folio, because we could try the next order if mem_cgroup_charge() fails, although the memcg's memory usage is close to its limits. 2) using same GFP flags for allocation and charge is to be consistent with PMD THP firstly, in addition, according to GFP flag returned from vma_thp_gfp_mask(), GFP_TRANSHUGE_LIGHT could make us skip direct reclaim, _GFP_NORETRY will make us skip mem_cgroup_oom() and won't trigger memory cgroup oom from large order(order <= COSTLY_ORDER) folio charging. Link: https://lkml.kernel.org/r/20240122011612.501029-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240117103954.2756050-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-17 10:39:54 +00:00
next:
mm: add per-order mTHP anon_fault_alloc and anon_fault_fallback counters Patch series "mm: add per-order mTHP alloc and swpout counters", v6. The patchset introduces a framework to facilitate mTHP counters, starting with the allocation and swap-out counters. Currently, only four new nodes are appended to the stats directory for each mTHP size. /sys/kernel/mm/transparent_hugepage/hugepages-<size>/stats anon_fault_alloc anon_fault_fallback anon_fault_fallback_charge anon_swpout anon_swpout_fallback These nodes are crucial for us to monitor the fragmentation levels of both the buddy system and the swap partitions. In the future, we may consider adding additional nodes for further insights. This patch (of 4): Profiling a system blindly with mTHP has become challenging due to the lack of visibility into its operations. Presenting the success rate of mTHP allocations appears to be pressing need. Recently, I've been experiencing significant difficulty debugging performance improvements and regressions without these figures. It's crucial for us to understand the true effectiveness of mTHP in real-world scenarios, especially in systems with fragmented memory. This patch establishes the framework for per-order mTHP counters. It begins by introducing the anon_fault_alloc and anon_fault_fallback counters. Additionally, to maintain consistency with thp_fault_fallback_charge in /proc/vmstat, this patch also tracks anon_fault_fallback_charge when mem_cgroup_charge fails for mTHP. Incorporating additional counters should now be straightforward as well. Link: https://lkml.kernel.org/r/20240412114858.407208-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240412114858.407208-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-12 11:48:55 +00:00
count_mthp_stat(order, MTHP_STAT_ANON_FAULT_FALLBACK);
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
order = next_order(&orders, order);
}
fallback:
#endif
mm: memory: move mem_cgroup_charge() into alloc_anon_folio() The GFP flags from vma_thp_gfp_mask() according to user configuration only used for large folio allocation but not for memory cgroup charge, and GFP_KERNEL is used for both order-0 and large order folio when memory cgroup charge at present. However, mem_cgroup_charge() uses the GFP flags in a fairly sophisticated way. In addition to checking gfpflags_allow_blocking(), it pays attention to __GFP_NORETRY and __GFP_RETRY_MAYFAIL to ensure that processes within this memcg do not exceed their quotas. So we'd better to move mem_cgroup_charge() into alloc_anon_folio(), 1) it will make us to allocate as much as possible large order folio, because we could try the next order if mem_cgroup_charge() fails, although the memcg's memory usage is close to its limits. 2) using same GFP flags for allocation and charge is to be consistent with PMD THP firstly, in addition, according to GFP flag returned from vma_thp_gfp_mask(), GFP_TRANSHUGE_LIGHT could make us skip direct reclaim, _GFP_NORETRY will make us skip mem_cgroup_oom() and won't trigger memory cgroup oom from large order(order <= COSTLY_ORDER) folio charging. Link: https://lkml.kernel.org/r/20240122011612.501029-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240117103954.2756050-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-17 10:39:54 +00:00
return folio_prealloc(vma->vm_mm, vma, vmf->address, true);
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
}
/*
* We enter with non-exclusive mmap_lock (to exclude vma changes,
* but allow concurrent faults), and pte mapped but not yet locked.
* We return with mmap_lock still held, but pte unmapped and unlocked.
*/
static vm_fault_t do_anonymous_page(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
unsigned long addr = vmf->address;
struct folio *folio;
vm_fault_t ret = 0;
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
int nr_pages = 1;
pte_t entry;
/* File mapping without ->vm_ops ? */
if (vma->vm_flags & VM_SHARED)
return VM_FAULT_SIGBUS;
/*
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
* Use pte_alloc() instead of pte_alloc_map(), so that OOM can
* be distinguished from a transient failure of pte_offset_map().
*/
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 23:28:34 +00:00
if (pte_alloc(vma->vm_mm, vmf->pmd))
return VM_FAULT_OOM;
/* Use the zero-page for reads */
if (!(vmf->flags & FAULT_FLAG_WRITE) &&
!mm_forbids_zeropage(vma->vm_mm)) {
entry = pte_mkspecial(pfn_pte(my_zero_pfn(vmf->address),
vma->vm_page_prot));
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (!vmf->pte)
goto unlock;
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
if (vmf_pte_changed(vmf)) {
update_mmu_tlb(vma, vmf->address, vmf->pte);
mm: reinstate ZERO_PAGE KAMEZAWA Hiroyuki has observed customers of earlier kernels taking advantage of the ZERO_PAGE: which we stopped do_anonymous_page() from using in 2.6.24. And there were a couple of regression reports on LKML. Following suggestions from Linus, reinstate do_anonymous_page() use of the ZERO_PAGE; but this time avoid dirtying its struct page cacheline with (map)count updates - let vm_normal_page() regard it as abnormal. Use it only on arches which __HAVE_ARCH_PTE_SPECIAL (x86, s390, sh32, most powerpc): that's not essential, but minimizes additional branches (keeping them in the unlikely pte_special case); and incidentally excludes mips (some models of which needed eight colours of ZERO_PAGE to avoid costly exceptions). Don't be fanatical about avoiding ZERO_PAGE updates: get_user_pages() callers won't want to make exceptions for it, so increment its count there. Changes to mlock and migration? happily seems not needed. In most places it's quicker to check pfn than struct page address: prepare a __read_mostly zero_pfn for that. Does get_dump_page() still need its ZERO_PAGE check? probably not, but keep it anyway. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:03:30 +00:00
goto unlock;
}
mm, oom: fix potential data corruption when oom_reaper races with writer Wenwei Tao has noticed that our current assumption that the oom victim is dying and never doing any visible changes after it dies, and so the oom_reaper can tear it down, is not entirely true. __task_will_free_mem consider a task dying when SIGNAL_GROUP_EXIT is set but do_group_exit sends SIGKILL to all threads _after_ the flag is set. So there is a race window when some threads won't have fatal_signal_pending while the oom_reaper could start unmapping the address space. Moreover some paths might not check for fatal signals before each PF/g-u-p/copy_from_user. We already have a protection for oom_reaper vs. PF races by checking MMF_UNSTABLE. This has been, however, checked only for kernel threads (use_mm users) which can outlive the oom victim. A simple fix would be to extend the current check in handle_mm_fault for all tasks but that wouldn't be sufficient because the current check assumes that a kernel thread would bail out after EFAULT from get_user*/copy_from_user and never re-read the same address which would succeed because the PF path has established page tables already. This seems to be the case for the only existing use_mm user currently (virtio driver) but it is rather fragile in general. This is even more fragile in general for more complex paths such as generic_perform_write which can re-read the same address more times (e.g. iov_iter_copy_from_user_atomic to fail and then iov_iter_fault_in_readable on retry). Therefore we have to implement MMF_UNSTABLE protection in a robust way and never make a potentially corrupted content visible. That requires to hook deeper into the PF path and check for the flag _every time_ before a pte for anonymous memory is established (that means all !VM_SHARED mappings). The corruption can be triggered artificially (http://lkml.kernel.org/r/201708040646.v746kkhC024636@www262.sakura.ne.jp) but there doesn't seem to be any real life bug report. The race window should be quite tight to trigger most of the time. Link: http://lkml.kernel.org/r/20170807113839.16695-3-mhocko@kernel.org Fixes: aac453635549 ("mm, oom: introduce oom reaper") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Wenwei Tao <wenwei.tww@alibaba-inc.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:15 +00:00
ret = check_stable_address_space(vma->vm_mm);
if (ret)
goto unlock;
/* Deliver the page fault to userland, check inside PT lock */
if (userfaultfd_missing(vma)) {
pte_unmap_unlock(vmf->pte, vmf->ptl);
return handle_userfault(vmf, VM_UFFD_MISSING);
}
mm: reinstate ZERO_PAGE KAMEZAWA Hiroyuki has observed customers of earlier kernels taking advantage of the ZERO_PAGE: which we stopped do_anonymous_page() from using in 2.6.24. And there were a couple of regression reports on LKML. Following suggestions from Linus, reinstate do_anonymous_page() use of the ZERO_PAGE; but this time avoid dirtying its struct page cacheline with (map)count updates - let vm_normal_page() regard it as abnormal. Use it only on arches which __HAVE_ARCH_PTE_SPECIAL (x86, s390, sh32, most powerpc): that's not essential, but minimizes additional branches (keeping them in the unlikely pte_special case); and incidentally excludes mips (some models of which needed eight colours of ZERO_PAGE to avoid costly exceptions). Don't be fanatical about avoiding ZERO_PAGE updates: get_user_pages() callers won't want to make exceptions for it, so increment its count there. Changes to mlock and migration? happily seems not needed. In most places it's quicker to check pfn than struct page address: prepare a __read_mostly zero_pfn for that. Does get_dump_page() still need its ZERO_PAGE check? probably not, but keep it anyway. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:03:30 +00:00
goto setpte;
}
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:40 +00:00
/* Allocate our own private page. */
ret = vmf_anon_prepare(vmf);
if (ret)
return ret;
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
/* Returns NULL on OOM or ERR_PTR(-EAGAIN) if we must retry the fault */
folio = alloc_anon_folio(vmf);
if (IS_ERR(folio))
return 0;
if (!folio)
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:40 +00:00
goto oom;
mm, memcg: Try charging a page before setting page up to date Historically memcg overhead was high even if memcg was unused. This has improved a lot but it still showed up in a profile summary as being a problem. /usr/src/linux-4.0-vanilla/mm/memcontrol.c 6.6441 395842 mem_cgroup_try_charge 2.950% 175781 __mem_cgroup_count_vm_event 1.431% 85239 mem_cgroup_page_lruvec 0.456% 27156 mem_cgroup_commit_charge 0.392% 23342 uncharge_list 0.323% 19256 mem_cgroup_update_lru_size 0.278% 16538 memcg_check_events 0.216% 12858 mem_cgroup_charge_statistics.isra.22 0.188% 11172 try_charge 0.150% 8928 commit_charge 0.141% 8388 get_mem_cgroup_from_mm 0.121% 7184 That is showing that 6.64% of system CPU cycles were in memcontrol.c and dominated by mem_cgroup_try_charge. The annotation shows that the bulk of the cost was checking PageSwapCache which is expected to be cache hot but is very expensive. The problem appears to be that __SetPageUptodate is called just before the check which is a write barrier. It is required to make sure struct page and page data is written before the PTE is updated and the data visible to userspace. memcg charging does not require or need the barrier but gets unfairly hit with the cost so this patch attempts the charging before the barrier. Aside from the accidental cost to memcg there is the added benefit that the barrier is avoided if the page cannot be charged. When applied the relevant profile summary is as follows. /usr/src/linux-4.0-chargefirst-v2r1/mm/memcontrol.c 3.7907 223277 __mem_cgroup_count_vm_event 1.143% 67312 mem_cgroup_page_lruvec 0.465% 27403 mem_cgroup_commit_charge 0.381% 22452 uncharge_list 0.332% 19543 mem_cgroup_update_lru_size 0.284% 16704 get_mem_cgroup_from_mm 0.271% 15952 mem_cgroup_try_charge 0.237% 13982 memcg_check_events 0.222% 13058 mem_cgroup_charge_statistics.isra.22 0.185% 10920 commit_charge 0.140% 8235 try_charge 0.131% 7716 That brings the overhead down to 3.79% and leaves the memcg fault accounting to the root cgroup but it's an improvement. The difference in headline performance of the page fault microbench is marginal as memcg is such a small component of it. pft faults 4.0.0 4.0.0 vanilla chargefirst Hmean faults/cpu-1 1443258.1051 ( 0.00%) 1509075.7561 ( 4.56%) Hmean faults/cpu-3 1340385.9270 ( 0.00%) 1339160.7113 ( -0.09%) Hmean faults/cpu-5 875599.0222 ( 0.00%) 874174.1255 ( -0.16%) Hmean faults/cpu-7 601146.6726 ( 0.00%) 601370.9977 ( 0.04%) Hmean faults/cpu-8 510728.2754 ( 0.00%) 510598.8214 ( -0.03%) Hmean faults/sec-1 1432084.7845 ( 0.00%) 1497935.5274 ( 4.60%) Hmean faults/sec-3 3943818.1437 ( 0.00%) 3941920.1520 ( -0.05%) Hmean faults/sec-5 3877573.5867 ( 0.00%) 3869385.7553 ( -0.21%) Hmean faults/sec-7 3991832.0418 ( 0.00%) 3992181.4189 ( 0.01%) Hmean faults/sec-8 3987189.8167 ( 0.00%) 3986452.2204 ( -0.02%) It's only visible at single threaded. The overhead is there for higher threads but other factors dominate. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:57:27 +00:00
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
nr_pages = folio_nr_pages(folio);
addr = ALIGN_DOWN(vmf->address, nr_pages * PAGE_SIZE);
/*
* The memory barrier inside __folio_mark_uptodate makes sure that
* preceding stores to the page contents become visible before
* the set_pte_at() write.
*/
__folio_mark_uptodate(folio);
entry = mk_pte(&folio->page, vma->vm_page_prot);
entry = pte_sw_mkyoung(entry);
if (vma->vm_flags & VM_WRITE)
mm: Make pte_mkwrite() take a VMA The x86 Shadow stack feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. One of these unusual properties is that shadow stack memory is writable, but only in limited ways. These limits are applied via a specific PTE bit combination. Nevertheless, the memory is writable, and core mm code will need to apply the writable permissions in the typical paths that call pte_mkwrite(). Future patches will make pte_mkwrite() take a VMA, so that the x86 implementation of it can know whether to create regular writable or shadow stack mappings. But there are a couple of challenges to this. Modifying the signatures of each arch pte_mkwrite() implementation would be error prone because some are generated with macros and would need to be re-implemented. Also, some pte_mkwrite() callers operate on kernel memory without a VMA. So this can be done in a three step process. First pte_mkwrite() can be renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite() added that just calls pte_mkwrite_novma(). Next callers without a VMA can be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers can be changed to take/pass a VMA. Previous work pte_mkwrite() renamed pte_mkwrite_novma() and converted callers that don't have a VMA were to use pte_mkwrite_novma(). So now change pte_mkwrite() to take a VMA and change the remaining callers to pass a VMA. Apply the same changes for pmd_mkwrite(). No functional change. Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/all/20230613001108.3040476-4-rick.p.edgecombe%40intel.com
2023-06-13 00:10:29 +00:00
entry = pte_mkwrite(pte_mkdirty(entry), vma);
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, addr, &vmf->ptl);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (!vmf->pte)
goto release;
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
if (nr_pages == 1 && vmf_pte_changed(vmf)) {
update_mmu_tlb(vma, addr, vmf->pte);
goto release;
} else if (nr_pages > 1 && !pte_range_none(vmf->pte, nr_pages)) {
update_mmu_tlb_range(vma, addr, vmf->pte, nr_pages);
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:24:40 +00:00
goto release;
}
ksm: fix oom deadlock There's a now-obvious deadlock in KSM's out-of-memory handling: imagine ksmd or KSM_RUN_UNMERGE handling, holding ksm_thread_mutex, trying to allocate a page to break KSM in an mm which becomes the OOM victim (quite likely in the unmerge case): it's killed and goes to exit, and hangs there waiting to acquire ksm_thread_mutex. Clearly we must not require ksm_thread_mutex in __ksm_exit, simple though that made everything else: perhaps use mmap_sem somehow? And part of the answer lies in the comments on unmerge_ksm_pages: __ksm_exit should also leave all the rmap_item removal to ksmd. But there's a fundamental problem, that KSM relies upon mmap_sem to guarantee the consistency of the mm it's dealing with, yet exit_mmap tears down an mm without taking mmap_sem. And bumping mm_users won't help at all, that just ensures that the pages the OOM killer assumes are on their way to being freed will not be freed. The best answer seems to be, to move the ksm_exit callout from just before exit_mmap, to the middle of exit_mmap: after the mm's pages have been freed (if the mmu_gather is flushed), but before its page tables and vma structures have been freed; and down_write,up_write mmap_sem there to serialize with KSM's own reliance on mmap_sem. But KSM then needs to be careful, whenever it downs mmap_sem, to check that the mm is not already exiting: there's a danger of using find_vma on a layout that's being torn apart, or writing into page tables which have been freed for reuse; and even do_anonymous_page and __do_fault need to check they're not being called by break_ksm to reinstate a pte after zap_pte_range has zapped that page table. Though it might be clearer to add an exiting flag, set while holding mmap_sem in __ksm_exit, that wouldn't cover the issue of reinstating a zapped pte. All we need is to check whether mm_users is 0 - but must remember that ksmd may detect that before __ksm_exit is reached. So, ksm_test_exit(mm) added to comment such checks on mm->mm_users. __ksm_exit now has to leave clearing up the rmap_items to ksmd, that needs ksm_thread_mutex; but shift the exiting mm just after the ksm_scan cursor so that it will soon be dealt with. __ksm_enter raise mm_count to hold the mm_struct, ksmd's exit processing (exactly like its processing when it finds all VM_MERGEABLEs unmapped) mmdrop it, similar procedure for KSM_RUN_UNMERGE (which has stopped ksmd). But also give __ksm_exit a fast path: when there's no complication (no rmap_items attached to mm and it's not at the ksm_scan cursor), it can safely do all the exiting work itself. This is not just an optimization: when ksmd is not running, the raised mm_count would otherwise leak mm_structs. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:02:20 +00:00
mm, oom: fix potential data corruption when oom_reaper races with writer Wenwei Tao has noticed that our current assumption that the oom victim is dying and never doing any visible changes after it dies, and so the oom_reaper can tear it down, is not entirely true. __task_will_free_mem consider a task dying when SIGNAL_GROUP_EXIT is set but do_group_exit sends SIGKILL to all threads _after_ the flag is set. So there is a race window when some threads won't have fatal_signal_pending while the oom_reaper could start unmapping the address space. Moreover some paths might not check for fatal signals before each PF/g-u-p/copy_from_user. We already have a protection for oom_reaper vs. PF races by checking MMF_UNSTABLE. This has been, however, checked only for kernel threads (use_mm users) which can outlive the oom victim. A simple fix would be to extend the current check in handle_mm_fault for all tasks but that wouldn't be sufficient because the current check assumes that a kernel thread would bail out after EFAULT from get_user*/copy_from_user and never re-read the same address which would succeed because the PF path has established page tables already. This seems to be the case for the only existing use_mm user currently (virtio driver) but it is rather fragile in general. This is even more fragile in general for more complex paths such as generic_perform_write which can re-read the same address more times (e.g. iov_iter_copy_from_user_atomic to fail and then iov_iter_fault_in_readable on retry). Therefore we have to implement MMF_UNSTABLE protection in a robust way and never make a potentially corrupted content visible. That requires to hook deeper into the PF path and check for the flag _every time_ before a pte for anonymous memory is established (that means all !VM_SHARED mappings). The corruption can be triggered artificially (http://lkml.kernel.org/r/201708040646.v746kkhC024636@www262.sakura.ne.jp) but there doesn't seem to be any real life bug report. The race window should be quite tight to trigger most of the time. Link: http://lkml.kernel.org/r/20170807113839.16695-3-mhocko@kernel.org Fixes: aac453635549 ("mm, oom: introduce oom reaper") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Wenwei Tao <wenwei.tww@alibaba-inc.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:15 +00:00
ret = check_stable_address_space(vma->vm_mm);
if (ret)
goto release;
/* Deliver the page fault to userland, check inside PT lock */
if (userfaultfd_missing(vma)) {
pte_unmap_unlock(vmf->pte, vmf->ptl);
folio_put(folio);
return handle_userfault(vmf, VM_UFFD_MISSING);
}
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
folio_ref_add(folio, nr_pages - 1);
add_mm_counter(vma->vm_mm, MM_ANONPAGES, nr_pages);
mm: add per-order mTHP anon_fault_alloc and anon_fault_fallback counters Patch series "mm: add per-order mTHP alloc and swpout counters", v6. The patchset introduces a framework to facilitate mTHP counters, starting with the allocation and swap-out counters. Currently, only four new nodes are appended to the stats directory for each mTHP size. /sys/kernel/mm/transparent_hugepage/hugepages-<size>/stats anon_fault_alloc anon_fault_fallback anon_fault_fallback_charge anon_swpout anon_swpout_fallback These nodes are crucial for us to monitor the fragmentation levels of both the buddy system and the swap partitions. In the future, we may consider adding additional nodes for further insights. This patch (of 4): Profiling a system blindly with mTHP has become challenging due to the lack of visibility into its operations. Presenting the success rate of mTHP allocations appears to be pressing need. Recently, I've been experiencing significant difficulty debugging performance improvements and regressions without these figures. It's crucial for us to understand the true effectiveness of mTHP in real-world scenarios, especially in systems with fragmented memory. This patch establishes the framework for per-order mTHP counters. It begins by introducing the anon_fault_alloc and anon_fault_fallback counters. Additionally, to maintain consistency with thp_fault_fallback_charge in /proc/vmstat, this patch also tracks anon_fault_fallback_charge when mem_cgroup_charge fails for mTHP. Incorporating additional counters should now be straightforward as well. Link: https://lkml.kernel.org/r/20240412114858.407208-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240412114858.407208-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-12 11:48:55 +00:00
count_mthp_stat(folio_order(folio), MTHP_STAT_ANON_FAULT_ALLOC);
mm: extend rmap flags arguments for folio_add_new_anon_rmap Patch series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()", v2. This patchset is preparatory work for mTHP swapin. folio_add_new_anon_rmap() assumes that new anon rmaps are always exclusive. However, this assumption doesn’t hold true for cases like do_swap_page(), where a new anon might be added to the swapcache and is not necessarily exclusive. The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to handle both exclusive and non-exclusive new anon folios. The do_swap_page() function is updated to use this extended API with rmap flags. Consequently, all new anon folios now consistently use folio_add_new_anon_rmap(). The special case for !folio_test_anon() in __folio_add_anon_rmap() can be safely removed. In conclusion, new anon folios always use folio_add_new_anon_rmap(), regardless of exclusivity. Old anon folios continue to use __folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and folio_add_anon_rmap_ptes(). This patch (of 3): In the case of a swap-in, a new anonymous folio is not necessarily exclusive. This patch updates the rmap flags to allow a new anonymous folio to be treated as either exclusive or non-exclusive. To maintain the existing behavior, we always use EXCLUSIVE as the default setting. [akpm@linux-foundation.org: cleanup and constifications per David and akpm] [v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()] Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com [v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap] Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: Shuai Yuan <yuanshuai@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-17 23:11:35 +00:00
folio_add_new_anon_rmap(folio, vma, addr, RMAP_EXCLUSIVE);
folio_add_lru_vma(folio, vma);
mm: reinstate ZERO_PAGE KAMEZAWA Hiroyuki has observed customers of earlier kernels taking advantage of the ZERO_PAGE: which we stopped do_anonymous_page() from using in 2.6.24. And there were a couple of regression reports on LKML. Following suggestions from Linus, reinstate do_anonymous_page() use of the ZERO_PAGE; but this time avoid dirtying its struct page cacheline with (map)count updates - let vm_normal_page() regard it as abnormal. Use it only on arches which __HAVE_ARCH_PTE_SPECIAL (x86, s390, sh32, most powerpc): that's not essential, but minimizes additional branches (keeping them in the unlikely pte_special case); and incidentally excludes mips (some models of which needed eight colours of ZERO_PAGE to avoid costly exceptions). Don't be fanatical about avoiding ZERO_PAGE updates: get_user_pages() callers won't want to make exceptions for it, so increment its count there. Changes to mlock and migration? happily seems not needed. In most places it's quicker to check pfn than struct page address: prepare a __read_mostly zero_pfn for that. Does get_dump_page() still need its ZERO_PAGE check? probably not, but keep it anyway. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 00:03:30 +00:00
setpte:
if (vmf_orig_pte_uffd_wp(vmf))
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
entry = pte_mkuffd_wp(entry);
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
set_ptes(vma->vm_mm, addr, vmf->pte, entry, nr_pages);
/* No need to invalidate - it was non-present before */
mm: thp: support allocation of anonymous multi-size THP Introduce the logic to allow THP to be configured (through the new sysfs interface we just added) to allocate large folios to back anonymous memory, which are larger than the base page size but smaller than PMD-size. We call this new THP extension "multi-size THP" (mTHP). mTHP continues to be PTE-mapped, but in many cases can still provide similar benefits to traditional PMD-sized THP: Page faults are significantly reduced (by a factor of e.g. 4, 8, 16, etc. depending on the configured order), but latency spikes are much less prominent because the size of each page isn't as huge as the PMD-sized variant and there is less memory to clear in each page fault. The number of per-page operations (e.g. ref counting, rmap management, lru list management) are also significantly reduced since those ops now become per-folio. Some architectures also employ TLB compression mechanisms to squeeze more entries in when a set of PTEs are virtually and physically contiguous and approporiately aligned. In this case, TLB misses will occur less often. The new behaviour is disabled by default, but can be enabled at runtime by writing to /sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled (see documentation in previous commit). The long term aim is to change the default to include suitable lower orders, but there are some risks around internal fragmentation that need to be better understood first. [ryan.roberts@arm.com: resolve some multi-size THP review nits] Link: https://lkml.kernel.org/r/20231214160251.3574571-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-5-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:05 +00:00
update_mmu_cache_range(vmf, vma, addr, vmf->pte, nr_pages);
unlock:
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (vmf->pte)
pte_unmap_unlock(vmf->pte, vmf->ptl);
mm, oom: fix potential data corruption when oom_reaper races with writer Wenwei Tao has noticed that our current assumption that the oom victim is dying and never doing any visible changes after it dies, and so the oom_reaper can tear it down, is not entirely true. __task_will_free_mem consider a task dying when SIGNAL_GROUP_EXIT is set but do_group_exit sends SIGKILL to all threads _after_ the flag is set. So there is a race window when some threads won't have fatal_signal_pending while the oom_reaper could start unmapping the address space. Moreover some paths might not check for fatal signals before each PF/g-u-p/copy_from_user. We already have a protection for oom_reaper vs. PF races by checking MMF_UNSTABLE. This has been, however, checked only for kernel threads (use_mm users) which can outlive the oom victim. A simple fix would be to extend the current check in handle_mm_fault for all tasks but that wouldn't be sufficient because the current check assumes that a kernel thread would bail out after EFAULT from get_user*/copy_from_user and never re-read the same address which would succeed because the PF path has established page tables already. This seems to be the case for the only existing use_mm user currently (virtio driver) but it is rather fragile in general. This is even more fragile in general for more complex paths such as generic_perform_write which can re-read the same address more times (e.g. iov_iter_copy_from_user_atomic to fail and then iov_iter_fault_in_readable on retry). Therefore we have to implement MMF_UNSTABLE protection in a robust way and never make a potentially corrupted content visible. That requires to hook deeper into the PF path and check for the flag _every time_ before a pte for anonymous memory is established (that means all !VM_SHARED mappings). The corruption can be triggered artificially (http://lkml.kernel.org/r/201708040646.v746kkhC024636@www262.sakura.ne.jp) but there doesn't seem to be any real life bug report. The race window should be quite tight to trigger most of the time. Link: http://lkml.kernel.org/r/20170807113839.16695-3-mhocko@kernel.org Fixes: aac453635549 ("mm, oom: introduce oom reaper") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Wenwei Tao <wenwei.tww@alibaba-inc.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:15 +00:00
return ret;
release:
folio_put(folio);
goto unlock;
oom:
return VM_FAULT_OOM;
}
/*
* The mmap_lock must have been held on entry, and may have been
* released depending on flags and vma->vm_ops->fault() return value.
* See filemap_fault() and __lock_page_retry().
*/
static vm_fault_t __do_fault(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
struct folio *folio;
vm_fault_t ret;
mm, memcg: fix reclaim deadlock with writeback Liu Bo has experienced a deadlock between memcg (legacy) reclaim and the ext4 writeback task1: wait_on_page_bit+0x82/0xa0 shrink_page_list+0x907/0x960 shrink_inactive_list+0x2c7/0x680 shrink_node_memcg+0x404/0x830 shrink_node+0xd8/0x300 do_try_to_free_pages+0x10d/0x330 try_to_free_mem_cgroup_pages+0xd5/0x1b0 try_charge+0x14d/0x720 memcg_kmem_charge_memcg+0x3c/0xa0 memcg_kmem_charge+0x7e/0xd0 __alloc_pages_nodemask+0x178/0x260 alloc_pages_current+0x95/0x140 pte_alloc_one+0x17/0x40 __pte_alloc+0x1e/0x110 alloc_set_pte+0x5fe/0xc20 do_fault+0x103/0x970 handle_mm_fault+0x61e/0xd10 __do_page_fault+0x252/0x4d0 do_page_fault+0x30/0x80 page_fault+0x28/0x30 task2: __lock_page+0x86/0xa0 mpage_prepare_extent_to_map+0x2e7/0x310 [ext4] ext4_writepages+0x479/0xd60 do_writepages+0x1e/0x30 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x272/0x600 __writeback_inodes_wb+0x92/0xc0 wb_writeback+0x268/0x300 wb_workfn+0xb4/0x390 process_one_work+0x189/0x420 worker_thread+0x4e/0x4b0 kthread+0xe6/0x100 ret_from_fork+0x41/0x50 He adds "task1 is waiting for the PageWriteback bit of the page that task2 has collected in mpd->io_submit->io_bio, and tasks2 is waiting for the LOCKED bit the page which tasks1 has locked" More precisely task1 is handling a page fault and it has a page locked while it charges a new page table to a memcg. That in turn hits a memory limit reclaim and the memcg reclaim for legacy controller is waiting on the writeback but that is never going to finish because the writeback itself is waiting for the page locked in the #PF path. So this is essentially ABBA deadlock: lock_page(A) SetPageWriteback(A) unlock_page(A) lock_page(B) lock_page(B) pte_alloc_pne shrink_page_list wait_on_page_writeback(A) SetPageWriteback(B) unlock_page(B) # flush A, B to clear the writeback This accumulating of more pages to flush is used by several filesystems to generate a more optimal IO patterns. Waiting for the writeback in legacy memcg controller is a workaround for pre-mature OOM killer invocations because there is no dirty IO throttling available for the controller. There is no easy way around that unfortunately. Therefore fix this specific issue by pre-allocating the page table outside of the page lock. We have that handy infrastructure for that already so simply reuse the fault-around pattern which already does this. There are probably other hidden __GFP_ACCOUNT | GFP_KERNEL allocations from under a fs page locked but they should be really rare. I am not aware of a better solution unfortunately. [akpm@linux-foundation.org: fix mm/memory.c:__do_fault()] [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: enhance comment, per Johannes] Link: http://lkml.kernel.org/r/20181214084948.GA5624@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181213092221.27270-1-mhocko@kernel.org Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Liu Bo <bo.liu@linux.alibaba.com> Debugged-by: Liu Bo <bo.liu@linux.alibaba.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08 23:23:07 +00:00
/*
* Preallocate pte before we take page_lock because this might lead to
* deadlocks for memcg reclaim which waits for pages under writeback:
* lock_page(A)
* SetPageWriteback(A)
* unlock_page(A)
* lock_page(B)
* lock_page(B)
* pte_alloc_one
* shrink_folio_list
mm, memcg: fix reclaim deadlock with writeback Liu Bo has experienced a deadlock between memcg (legacy) reclaim and the ext4 writeback task1: wait_on_page_bit+0x82/0xa0 shrink_page_list+0x907/0x960 shrink_inactive_list+0x2c7/0x680 shrink_node_memcg+0x404/0x830 shrink_node+0xd8/0x300 do_try_to_free_pages+0x10d/0x330 try_to_free_mem_cgroup_pages+0xd5/0x1b0 try_charge+0x14d/0x720 memcg_kmem_charge_memcg+0x3c/0xa0 memcg_kmem_charge+0x7e/0xd0 __alloc_pages_nodemask+0x178/0x260 alloc_pages_current+0x95/0x140 pte_alloc_one+0x17/0x40 __pte_alloc+0x1e/0x110 alloc_set_pte+0x5fe/0xc20 do_fault+0x103/0x970 handle_mm_fault+0x61e/0xd10 __do_page_fault+0x252/0x4d0 do_page_fault+0x30/0x80 page_fault+0x28/0x30 task2: __lock_page+0x86/0xa0 mpage_prepare_extent_to_map+0x2e7/0x310 [ext4] ext4_writepages+0x479/0xd60 do_writepages+0x1e/0x30 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x272/0x600 __writeback_inodes_wb+0x92/0xc0 wb_writeback+0x268/0x300 wb_workfn+0xb4/0x390 process_one_work+0x189/0x420 worker_thread+0x4e/0x4b0 kthread+0xe6/0x100 ret_from_fork+0x41/0x50 He adds "task1 is waiting for the PageWriteback bit of the page that task2 has collected in mpd->io_submit->io_bio, and tasks2 is waiting for the LOCKED bit the page which tasks1 has locked" More precisely task1 is handling a page fault and it has a page locked while it charges a new page table to a memcg. That in turn hits a memory limit reclaim and the memcg reclaim for legacy controller is waiting on the writeback but that is never going to finish because the writeback itself is waiting for the page locked in the #PF path. So this is essentially ABBA deadlock: lock_page(A) SetPageWriteback(A) unlock_page(A) lock_page(B) lock_page(B) pte_alloc_pne shrink_page_list wait_on_page_writeback(A) SetPageWriteback(B) unlock_page(B) # flush A, B to clear the writeback This accumulating of more pages to flush is used by several filesystems to generate a more optimal IO patterns. Waiting for the writeback in legacy memcg controller is a workaround for pre-mature OOM killer invocations because there is no dirty IO throttling available for the controller. There is no easy way around that unfortunately. Therefore fix this specific issue by pre-allocating the page table outside of the page lock. We have that handy infrastructure for that already so simply reuse the fault-around pattern which already does this. There are probably other hidden __GFP_ACCOUNT | GFP_KERNEL allocations from under a fs page locked but they should be really rare. I am not aware of a better solution unfortunately. [akpm@linux-foundation.org: fix mm/memory.c:__do_fault()] [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: enhance comment, per Johannes] Link: http://lkml.kernel.org/r/20181214084948.GA5624@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181213092221.27270-1-mhocko@kernel.org Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Liu Bo <bo.liu@linux.alibaba.com> Debugged-by: Liu Bo <bo.liu@linux.alibaba.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08 23:23:07 +00:00
* wait_on_page_writeback(A)
* SetPageWriteback(B)
* unlock_page(B)
* # flush A, B to clear the writeback
*/
if (pmd_none(*vmf->pmd) && !vmf->prealloc_pte) {
vmf->prealloc_pte = pte_alloc_one(vma->vm_mm);
mm, memcg: fix reclaim deadlock with writeback Liu Bo has experienced a deadlock between memcg (legacy) reclaim and the ext4 writeback task1: wait_on_page_bit+0x82/0xa0 shrink_page_list+0x907/0x960 shrink_inactive_list+0x2c7/0x680 shrink_node_memcg+0x404/0x830 shrink_node+0xd8/0x300 do_try_to_free_pages+0x10d/0x330 try_to_free_mem_cgroup_pages+0xd5/0x1b0 try_charge+0x14d/0x720 memcg_kmem_charge_memcg+0x3c/0xa0 memcg_kmem_charge+0x7e/0xd0 __alloc_pages_nodemask+0x178/0x260 alloc_pages_current+0x95/0x140 pte_alloc_one+0x17/0x40 __pte_alloc+0x1e/0x110 alloc_set_pte+0x5fe/0xc20 do_fault+0x103/0x970 handle_mm_fault+0x61e/0xd10 __do_page_fault+0x252/0x4d0 do_page_fault+0x30/0x80 page_fault+0x28/0x30 task2: __lock_page+0x86/0xa0 mpage_prepare_extent_to_map+0x2e7/0x310 [ext4] ext4_writepages+0x479/0xd60 do_writepages+0x1e/0x30 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x272/0x600 __writeback_inodes_wb+0x92/0xc0 wb_writeback+0x268/0x300 wb_workfn+0xb4/0x390 process_one_work+0x189/0x420 worker_thread+0x4e/0x4b0 kthread+0xe6/0x100 ret_from_fork+0x41/0x50 He adds "task1 is waiting for the PageWriteback bit of the page that task2 has collected in mpd->io_submit->io_bio, and tasks2 is waiting for the LOCKED bit the page which tasks1 has locked" More precisely task1 is handling a page fault and it has a page locked while it charges a new page table to a memcg. That in turn hits a memory limit reclaim and the memcg reclaim for legacy controller is waiting on the writeback but that is never going to finish because the writeback itself is waiting for the page locked in the #PF path. So this is essentially ABBA deadlock: lock_page(A) SetPageWriteback(A) unlock_page(A) lock_page(B) lock_page(B) pte_alloc_pne shrink_page_list wait_on_page_writeback(A) SetPageWriteback(B) unlock_page(B) # flush A, B to clear the writeback This accumulating of more pages to flush is used by several filesystems to generate a more optimal IO patterns. Waiting for the writeback in legacy memcg controller is a workaround for pre-mature OOM killer invocations because there is no dirty IO throttling available for the controller. There is no easy way around that unfortunately. Therefore fix this specific issue by pre-allocating the page table outside of the page lock. We have that handy infrastructure for that already so simply reuse the fault-around pattern which already does this. There are probably other hidden __GFP_ACCOUNT | GFP_KERNEL allocations from under a fs page locked but they should be really rare. I am not aware of a better solution unfortunately. [akpm@linux-foundation.org: fix mm/memory.c:__do_fault()] [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: enhance comment, per Johannes] Link: http://lkml.kernel.org/r/20181214084948.GA5624@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181213092221.27270-1-mhocko@kernel.org Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Liu Bo <bo.liu@linux.alibaba.com> Debugged-by: Liu Bo <bo.liu@linux.alibaba.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08 23:23:07 +00:00
if (!vmf->prealloc_pte)
return VM_FAULT_OOM;
}
ret = vma->vm_ops->fault(vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY |
VM_FAULT_DONE_COW)))
return ret;
folio = page_folio(vmf->page);
if (unlikely(PageHWPoison(vmf->page))) {
vm_fault_t poisonret = VM_FAULT_HWPOISON;
if (ret & VM_FAULT_LOCKED) {
if (page_mapped(vmf->page))
unmap_mapping_folio(folio);
/* Retry if a clean folio was removed from the cache. */
if (mapping_evict_folio(folio->mapping, folio))
mm,hwpoison: unmap poisoned page before invalidation In some cases it appears the invalidation of a hwpoisoned page fails because the page is still mapped in another process. This can cause a program to be continuously restarted and die when it page faults on the page that was not invalidated. Avoid that problem by unmapping the hwpoisoned page when we find it. Another issue is that sometimes we end up oopsing in finish_fault, if the code tries to do something with the now-NULL vmf->page. I did not hit this error when submitting the previous patch because there are several opportunities for alloc_set_pte to bail out before accessing vmf->page, and that apparently happened on those systems, and most of the time on other systems, too. However, across several million systems that error does occur a handful of times a day. It can be avoided by returning VM_FAULT_NOPAGE which will cause do_read_fault to return before calling finish_fault. Link: https://lkml.kernel.org/r/20220325161428.5068d97e@imladris.surriel.com Fixes: e53ac7374e64 ("mm: invalidate hwpoison page cache page in fault path") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-01 18:28:42 +00:00
poisonret = VM_FAULT_NOPAGE;
folio_unlock(folio);
}
folio_put(folio);
vmf->page = NULL;
return poisonret;
}
if (unlikely(!(ret & VM_FAULT_LOCKED)))
folio_lock(folio);
else
VM_BUG_ON_PAGE(!folio_test_locked(folio), vmf->page);
return ret;
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
static void deposit_prealloc_pte(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
pgtable_trans_huge_deposit(vma->vm_mm, vmf->pmd, vmf->prealloc_pte);
/*
* We are going to consume the prealloc table,
* count that as nr_ptes.
*/
mm_inc_nr_ptes(vma->vm_mm);
vmf->prealloc_pte = NULL;
}
vm_fault_t do_set_pmd(struct vm_fault *vmf, struct page *page)
{
struct folio *folio = page_folio(page);
struct vm_area_struct *vma = vmf->vma;
bool write = vmf->flags & FAULT_FLAG_WRITE;
unsigned long haddr = vmf->address & HPAGE_PMD_MASK;
pmd_t entry;
vm_fault_t ret = VM_FAULT_FALLBACK;
mm: thp: introduce multi-size THP sysfs interface In preparation for adding support for anonymous multi-size THP, introduce new sysfs structure that will be used to control the new behaviours. A new directory is added under transparent_hugepage for each supported THP size, and contains an `enabled` file, which can be set to "inherit" (to inherit the global setting), "always", "madvise" or "never". For now, the kernel still only supports PMD-sized anonymous THP, so only 1 directory is populated. The first half of the change converts transhuge_vma_suitable() and hugepage_vma_check() so that they take a bitfield of orders for which the user wants to determine support, and the functions filter out all the orders that can't be supported, given the current sysfs configuration and the VMA dimensions. The resulting functions are renamed to thp_vma_suitable_orders() and thp_vma_allowable_orders() respectively. Convenience functions that take a single, unencoded order and return a boolean are also defined as thp_vma_suitable_order() and thp_vma_allowable_order(). The second half of the change implements the new sysfs interface. It has been done so that each supported THP size has a `struct thpsize`, which describes the relevant metadata and is itself a kobject. This is pretty minimal for now, but should make it easy to add new per-thpsize files to the interface if needed in future (e.g. per-size defrag). Rather than keep the `enabled` state directly in the struct thpsize, I've elected to directly encode it into huge_anon_orders_[always|madvise|inherit] bitfields since this reduces the amount of work required in thp_vma_allowable_orders() which is called for every page fault. See Documentation/admin-guide/mm/transhuge.rst, as modified by this commit, for details of how the new sysfs interface works. [ryan.roberts@arm.com: fix build warning when CONFIG_SYSFS is disabled] Link: https://lkml.kernel.org/r/20231211125320.3997543-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20231207161211.2374093-4-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Barry Song <v-songbaohua@oppo.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-07 16:12:04 +00:00
if (!thp_vma_suitable_order(vma, haddr, PMD_ORDER))
return ret;
if (folio_order(folio) != HPAGE_PMD_ORDER)
return ret;
page = &folio->page;
mm: filemap: check if THP has hwpoisoned subpage for PMD page fault When handling shmem page fault the THP with corrupted subpage could be PMD mapped if certain conditions are satisfied. But kernel is supposed to send SIGBUS when trying to map hwpoisoned page. There are two paths which may do PMD map: fault around and regular fault. Before commit f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths") the thing was even worse in fault around path. The THP could be PMD mapped as long as the VMA fits regardless what subpage is accessed and corrupted. After this commit as long as head page is not corrupted the THP could be PMD mapped. In the regular fault path the THP could be PMD mapped as long as the corrupted page is not accessed and the VMA fits. This loophole could be fixed by iterating every subpage to check if any of them is hwpoisoned or not, but it is somewhat costly in page fault path. So introduce a new page flag called HasHWPoisoned on the first tail page. It indicates the THP has hwpoisoned subpage(s). It is set if any subpage of THP is found hwpoisoned by memory failure and after the refcount is bumped successfully, then cleared when the THP is freed or split. The soft offline path doesn't need this since soft offline handler just marks a subpage hwpoisoned when the subpage is migrated successfully. But shmem THP didn't get split then migrated at all. Link: https://lkml.kernel.org/r/20211020210755.23964-3-shy828301@gmail.com Fixes: 800d8c63b2e9 ("shmem: add huge pages support") Signed-off-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-28 21:36:11 +00:00
/*
* Just backoff if any subpage of a THP is corrupted otherwise
* the corrupted page may mapped by PMD silently to escape the
* check. This kind of THP just can be PTE mapped. Access to
* the corrupted subpage should trigger SIGBUS as expected.
*/
if (unlikely(folio_test_has_hwpoisoned(folio)))
mm: filemap: check if THP has hwpoisoned subpage for PMD page fault When handling shmem page fault the THP with corrupted subpage could be PMD mapped if certain conditions are satisfied. But kernel is supposed to send SIGBUS when trying to map hwpoisoned page. There are two paths which may do PMD map: fault around and regular fault. Before commit f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths") the thing was even worse in fault around path. The THP could be PMD mapped as long as the VMA fits regardless what subpage is accessed and corrupted. After this commit as long as head page is not corrupted the THP could be PMD mapped. In the regular fault path the THP could be PMD mapped as long as the corrupted page is not accessed and the VMA fits. This loophole could be fixed by iterating every subpage to check if any of them is hwpoisoned or not, but it is somewhat costly in page fault path. So introduce a new page flag called HasHWPoisoned on the first tail page. It indicates the THP has hwpoisoned subpage(s). It is set if any subpage of THP is found hwpoisoned by memory failure and after the refcount is bumped successfully, then cleared when the THP is freed or split. The soft offline path doesn't need this since soft offline handler just marks a subpage hwpoisoned when the subpage is migrated successfully. But shmem THP didn't get split then migrated at all. Link: https://lkml.kernel.org/r/20211020210755.23964-3-shy828301@gmail.com Fixes: 800d8c63b2e9 ("shmem: add huge pages support") Signed-off-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-28 21:36:11 +00:00
return ret;
/*
* Archs like ppc64 need additional space to store information
* related to pte entry. Use the preallocated table for that.
*/
if (arch_needs_pgtable_deposit() && !vmf->prealloc_pte) {
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 23:28:34 +00:00
vmf->prealloc_pte = pte_alloc_one(vma->vm_mm);
if (!vmf->prealloc_pte)
return VM_FAULT_OOM;
}
vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd);
if (unlikely(!pmd_none(*vmf->pmd)))
goto out;
flush_icache_pages(vma, page, HPAGE_PMD_NR);
entry = mk_huge_pmd(page, vma->vm_page_prot);
if (write)
entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma);
add_mm_counter(vma->vm_mm, mm_counter_file(folio), HPAGE_PMD_NR);
folio_add_file_rmap_pmd(folio, page, vma);
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
/*
* deposit and withdraw with pmd lock held
*/
if (arch_needs_pgtable_deposit())
deposit_prealloc_pte(vmf);
set_pmd_at(vma->vm_mm, haddr, vmf->pmd, entry);
update_mmu_cache_pmd(vma, haddr, vmf->pmd);
/* fault is handled */
ret = 0;
count_vm_event(THP_FILE_MAPPED);
out:
spin_unlock(vmf->ptl);
return ret;
}
#else
vm_fault_t do_set_pmd(struct vm_fault *vmf, struct page *page)
{
return VM_FAULT_FALLBACK;
}
#endif
/**
* set_pte_range - Set a range of PTEs to point to pages in a folio.
* @vmf: Fault decription.
* @folio: The folio that contains @page.
* @page: The first page to create a PTE for.
* @nr: The number of PTEs to create.
* @addr: The first address to create a PTE for.
*/
void set_pte_range(struct vm_fault *vmf, struct folio *folio,
struct page *page, unsigned int nr, unsigned long addr)
{
struct vm_area_struct *vma = vmf->vma;
bool write = vmf->flags & FAULT_FLAG_WRITE;
mm: fix old/young bit handling in the faulting path Commit 3bd786f76de2 ("mm: convert do_set_pte() to set_pte_range()") replaced do_set_pte() with set_pte_range() and that introduced a regression in the following faulting path of non-anonymous vmas which caused the PTE for the faulting address to be marked as old instead of young. handle_pte_fault() do_pte_missing() do_fault() do_read_fault() || do_cow_fault() || do_shared_fault() finish_fault() set_pte_range() The polarity of prefault calculation is incorrect. This leads to prefault being incorrectly set for the faulting address. The following check will incorrectly mark the PTE old rather than young. On some architectures this will cause a double fault to mark it young when the access is retried. if (prefault && arch_wants_old_prefaulted_pte()) entry = pte_mkold(entry); On a subsequent fault on the same address, the faulting path will see a non NULL vmf->pte and instead of reaching the do_pte_missing() path, PTE will then be correctly marked young in handle_pte_fault() itself. Due to this bug, performance degradation in the fault handling path will be observed due to unnecessary double faulting. Link: https://lkml.kernel.org/r/20240710014539.746200-1-rtummala@nvidia.com Fixes: 3bd786f76de2 ("mm: convert do_set_pte() to set_pte_range()") Signed-off-by: Ram Tummala <rtummala@nvidia.com> Reviewed-by: Yin Fengwei <fengwei.yin@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-10 01:45:39 +00:00
bool prefault = !in_range(vmf->address, addr, nr * PAGE_SIZE);
pte_t entry;
flush_icache_pages(vma, page, nr);
entry = mk_pte(page, vma->vm_page_prot);
2020-11-24 18:48:26 +00:00
if (prefault && arch_wants_old_prefaulted_pte())
entry = pte_mkold(entry);
else
entry = pte_sw_mkyoung(entry);
2020-11-24 18:48:26 +00:00
if (write)
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
if (unlikely(vmf_orig_pte_uffd_wp(vmf)))
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 20:15:33 +00:00
entry = pte_mkuffd_wp(entry);
/* copy-on-write page */
if (write && !(vma->vm_flags & VM_SHARED)) {
VM_BUG_ON_FOLIO(nr != 1, folio);
mm: extend rmap flags arguments for folio_add_new_anon_rmap Patch series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()", v2. This patchset is preparatory work for mTHP swapin. folio_add_new_anon_rmap() assumes that new anon rmaps are always exclusive. However, this assumption doesn’t hold true for cases like do_swap_page(), where a new anon might be added to the swapcache and is not necessarily exclusive. The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to handle both exclusive and non-exclusive new anon folios. The do_swap_page() function is updated to use this extended API with rmap flags. Consequently, all new anon folios now consistently use folio_add_new_anon_rmap(). The special case for !folio_test_anon() in __folio_add_anon_rmap() can be safely removed. In conclusion, new anon folios always use folio_add_new_anon_rmap(), regardless of exclusivity. Old anon folios continue to use __folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and folio_add_anon_rmap_ptes(). This patch (of 3): In the case of a swap-in, a new anonymous folio is not necessarily exclusive. This patch updates the rmap flags to allow a new anonymous folio to be treated as either exclusive or non-exclusive. To maintain the existing behavior, we always use EXCLUSIVE as the default setting. [akpm@linux-foundation.org: cleanup and constifications per David and akpm] [v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()] Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com [v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap] Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: Shuai Yuan <yuanshuai@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-17 23:11:35 +00:00
folio_add_new_anon_rmap(folio, vma, addr, RMAP_EXCLUSIVE);
folio_add_lru_vma(folio, vma);
} else {
mm/rmap: convert folio_add_file_rmap_range() into folio_add_file_rmap_[pte|ptes|pmd]() Let's get rid of the compound parameter and instead define explicitly which mappings we're adding. That is more future proof, easier to read and harder to mess up. Use an enum to express the granularity internally. Make the compiler always special-case on the granularity by using __always_inline. Replace the "compound" check by a switch-case that will be removed by the compiler completely. Add plenty of sanity checks with CONFIG_DEBUG_VM. Replace the folio_test_pmd_mappable() check by a config check in the caller and sanity checks. Convert the single user of folio_add_file_rmap_range(). While at it, consistently use "int" instead of "unisgned int" in rmap code when dealing with mapcounts and the number of pages. This function design can later easily be extended to PUDs and to batch PMDs. Note that for now we don't support anything bigger than PMD-sized folios (as we cleanly separated hugetlb handling). Sanity checks will catch if that ever changes. Next up is removing page_remove_rmap() along with its "compound" parameter and smilarly converting all other rmap functions. Link: https://lkml.kernel.org/r/20231220224504.646757-8-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Yin Fengwei <fengwei.yin@intel.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20 22:44:31 +00:00
folio_add_file_rmap_ptes(folio, page, nr, vma);
}
set_ptes(vma->vm_mm, addr, vmf->pte, entry, nr);
/* no need to invalidate: a not-present page won't be cached */
update_mmu_cache_range(vmf, vma, addr, vmf->pte, nr);
}
mm: check against orig_pte for finish_fault() This patch allows do_fault() to trigger on !pte_none() cases too. This prepares for the pte markers to be handled by do_fault() just like none pte. To achieve this, instead of unconditionally check against pte_none() in finish_fault(), we may hit the case that the orig_pte was some pte marker so what we want to do is to replace the pte marker with some valid pte entry. Then if orig_pte was set we'd want to check the current *pte (under pgtable lock) against orig_pte rather than none pte. Right now there's no solid way to safely reference orig_pte because when pmd is not allocated handle_pte_fault() will not initialize orig_pte, so it's not safe to reference it. There's another solution proposed before this patch to do pte_clear() for vmf->orig_pte for pmd==NULL case, however it turns out it'll break arm32 because arm32 could have assumption that pte_t* pointer will always reside on a real ram32 pgtable, not any kernel stack variable. To solve this, we add a new flag FAULT_FLAG_ORIG_PTE_VALID, and it'll be set along with orig_pte when there is valid orig_pte, or it'll be cleared when orig_pte was not initialized. It'll be updated every time we call handle_pte_fault(), so e.g. if a page fault retry happened it'll be properly updated along with orig_pte. [1] https://lore.kernel.org/lkml/710c48c9-406d-e4c5-a394-10501b951316@samsung.com/ [akpm@linux-foundation.org: coding-style cleanups] [peterx@redhat.com: fix crash reported by Marek] Link: https://lkml.kernel.org/r/Ylb9rXJyPm8/ao8f@xz-m1.local Link: https://lkml.kernel.org/r/20220405014836.14077-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:52 +00:00
static bool vmf_pte_changed(struct vm_fault *vmf)
{
if (vmf->flags & FAULT_FLAG_ORIG_PTE_VALID)
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
return !pte_same(ptep_get(vmf->pte), vmf->orig_pte);
mm: check against orig_pte for finish_fault() This patch allows do_fault() to trigger on !pte_none() cases too. This prepares for the pte markers to be handled by do_fault() just like none pte. To achieve this, instead of unconditionally check against pte_none() in finish_fault(), we may hit the case that the orig_pte was some pte marker so what we want to do is to replace the pte marker with some valid pte entry. Then if orig_pte was set we'd want to check the current *pte (under pgtable lock) against orig_pte rather than none pte. Right now there's no solid way to safely reference orig_pte because when pmd is not allocated handle_pte_fault() will not initialize orig_pte, so it's not safe to reference it. There's another solution proposed before this patch to do pte_clear() for vmf->orig_pte for pmd==NULL case, however it turns out it'll break arm32 because arm32 could have assumption that pte_t* pointer will always reside on a real ram32 pgtable, not any kernel stack variable. To solve this, we add a new flag FAULT_FLAG_ORIG_PTE_VALID, and it'll be set along with orig_pte when there is valid orig_pte, or it'll be cleared when orig_pte was not initialized. It'll be updated every time we call handle_pte_fault(), so e.g. if a page fault retry happened it'll be properly updated along with orig_pte. [1] https://lore.kernel.org/lkml/710c48c9-406d-e4c5-a394-10501b951316@samsung.com/ [akpm@linux-foundation.org: coding-style cleanups] [peterx@redhat.com: fix crash reported by Marek] Link: https://lkml.kernel.org/r/Ylb9rXJyPm8/ao8f@xz-m1.local Link: https://lkml.kernel.org/r/20220405014836.14077-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:52 +00:00
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
return !pte_none(ptep_get(vmf->pte));
mm: check against orig_pte for finish_fault() This patch allows do_fault() to trigger on !pte_none() cases too. This prepares for the pte markers to be handled by do_fault() just like none pte. To achieve this, instead of unconditionally check against pte_none() in finish_fault(), we may hit the case that the orig_pte was some pte marker so what we want to do is to replace the pte marker with some valid pte entry. Then if orig_pte was set we'd want to check the current *pte (under pgtable lock) against orig_pte rather than none pte. Right now there's no solid way to safely reference orig_pte because when pmd is not allocated handle_pte_fault() will not initialize orig_pte, so it's not safe to reference it. There's another solution proposed before this patch to do pte_clear() for vmf->orig_pte for pmd==NULL case, however it turns out it'll break arm32 because arm32 could have assumption that pte_t* pointer will always reside on a real ram32 pgtable, not any kernel stack variable. To solve this, we add a new flag FAULT_FLAG_ORIG_PTE_VALID, and it'll be set along with orig_pte when there is valid orig_pte, or it'll be cleared when orig_pte was not initialized. It'll be updated every time we call handle_pte_fault(), so e.g. if a page fault retry happened it'll be properly updated along with orig_pte. [1] https://lore.kernel.org/lkml/710c48c9-406d-e4c5-a394-10501b951316@samsung.com/ [akpm@linux-foundation.org: coding-style cleanups] [peterx@redhat.com: fix crash reported by Marek] Link: https://lkml.kernel.org/r/Ylb9rXJyPm8/ao8f@xz-m1.local Link: https://lkml.kernel.org/r/20220405014836.14077-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:52 +00:00
}
/**
* finish_fault - finish page fault once we have prepared the page to fault
*
* @vmf: structure describing the fault
*
* This function handles all that is needed to finish a page fault once the
* page to fault in is prepared. It handles locking of PTEs, inserts PTE for
* given page, adds reverse page mapping, handles memcg charges and LRU
* addition.
*
* The function expects the page to be locked and on success it consumes a
* reference of a page being mapped (for the PTE which maps it).
*
* Return: %0 on success, %VM_FAULT_ code in case of error.
*/
vm_fault_t finish_fault(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
struct page *page;
mm: memory: extend finish_fault() to support large folio Patch series "add mTHP support for anonymous shmem", v5. Anonymous pages have already been supported for multi-size (mTHP) allocation through commit 19eaf44954df, that can allow THP to be configured through the sysfs interface located at '/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'. However, the anonymous shmem will ignore the anonymous mTHP rule configured through the sysfs interface, and can only use the PMD-mapped THP, that is not reasonable. Many implement anonymous page sharing through mmap(MAP_SHARED | MAP_ANONYMOUS), especially in database usage scenarios, therefore, users expect to apply an unified mTHP strategy for anonymous pages, also including the anonymous shared pages, in order to enjoy the benefits of mTHP. For example, lower latency than PMD-mapped THP, smaller memory bloat than PMD-mapped THP, contiguous PTEs on ARM architecture to reduce TLB miss etc. As discussed in the bi-weekly MM meeting[1], the mTHP controls should control all of shmem, not only anonymous shmem, but support will be added iteratively. Therefore, this patch set starts with support for anonymous shmem. The primary strategy is similar to supporting anonymous mTHP. Introduce a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled', which can have almost the same values as the top-level '/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new additional "inherit" option and dropping the testing options 'force' and 'deny'. By default all sizes will be set to "never" except PMD size, which is set to "inherit". This ensures backward compatibility with the anonymous shmem enabled of the top level, meanwhile also allows independent control of anonymous shmem enabled for each mTHP. Use the page fault latency tool to measure the performance of 1G anonymous shmem with 32 threads on my machine environment with: ARM64 Architecture, 32 cores, 125G memory: base: mm-unstable user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.04s 3.10s 83516.416 2669684.890 mm-unstable + patchset, anon shmem mTHP disabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.02s 3.14s 82936.359 2630746.027 mm-unstable + patchset, anon shmem 64K mTHP enabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.08s 0.31s 678630.231 17082522.495 From the data above, it is observed that the patchset has a minimal impact when mTHP is not enabled (some fluctuations observed during testing). When enabling 64K mTHP, there is a significant improvement of the page fault latency. [1] https://lore.kernel.org/all/f1783ff0-65bd-4b2b-8952-52b6822a0835@redhat.com/ This patch (of 6): Add large folio mapping establishment support for finish_fault() as a preparation, to support multi-size THP allocation of anonymous shmem pages in the following patches. Keep the same behavior (per-page fault) for non-anon shmem to avoid inflating the RSS unintentionally, and we can discuss what size of mapping to build when extending mTHP to control non-anon shmem in the future. [baolin.wang@linux.alibaba.com: avoid going beyond the PMD pagetable size] Link: https://lkml.kernel.org/r/b0e6a8b1-a32c-459e-ae67-fde5d28773e6@linux.alibaba.com [baolin.wang@linux.alibaba.com: use 'PTRS_PER_PTE' instead of 'PTRS_PER_PTE - 1'] Link: https://lkml.kernel.org/r/e1f5767a-2c9b-4e37-afe6-1de26fe54e41@linux.alibaba.com Link: https://lkml.kernel.org/r/cover.1718090413.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/3a190892355989d42f59cf9f2f98b94694b0d24d.1718090413.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-11 10:11:05 +00:00
struct folio *folio;
vm_fault_t ret;
bool is_cow = (vmf->flags & FAULT_FLAG_WRITE) &&
!(vma->vm_flags & VM_SHARED);
mm: memory: extend finish_fault() to support large folio Patch series "add mTHP support for anonymous shmem", v5. Anonymous pages have already been supported for multi-size (mTHP) allocation through commit 19eaf44954df, that can allow THP to be configured through the sysfs interface located at '/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'. However, the anonymous shmem will ignore the anonymous mTHP rule configured through the sysfs interface, and can only use the PMD-mapped THP, that is not reasonable. Many implement anonymous page sharing through mmap(MAP_SHARED | MAP_ANONYMOUS), especially in database usage scenarios, therefore, users expect to apply an unified mTHP strategy for anonymous pages, also including the anonymous shared pages, in order to enjoy the benefits of mTHP. For example, lower latency than PMD-mapped THP, smaller memory bloat than PMD-mapped THP, contiguous PTEs on ARM architecture to reduce TLB miss etc. As discussed in the bi-weekly MM meeting[1], the mTHP controls should control all of shmem, not only anonymous shmem, but support will be added iteratively. Therefore, this patch set starts with support for anonymous shmem. The primary strategy is similar to supporting anonymous mTHP. Introduce a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled', which can have almost the same values as the top-level '/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new additional "inherit" option and dropping the testing options 'force' and 'deny'. By default all sizes will be set to "never" except PMD size, which is set to "inherit". This ensures backward compatibility with the anonymous shmem enabled of the top level, meanwhile also allows independent control of anonymous shmem enabled for each mTHP. Use the page fault latency tool to measure the performance of 1G anonymous shmem with 32 threads on my machine environment with: ARM64 Architecture, 32 cores, 125G memory: base: mm-unstable user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.04s 3.10s 83516.416 2669684.890 mm-unstable + patchset, anon shmem mTHP disabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.02s 3.14s 82936.359 2630746.027 mm-unstable + patchset, anon shmem 64K mTHP enabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.08s 0.31s 678630.231 17082522.495 From the data above, it is observed that the patchset has a minimal impact when mTHP is not enabled (some fluctuations observed during testing). When enabling 64K mTHP, there is a significant improvement of the page fault latency. [1] https://lore.kernel.org/all/f1783ff0-65bd-4b2b-8952-52b6822a0835@redhat.com/ This patch (of 6): Add large folio mapping establishment support for finish_fault() as a preparation, to support multi-size THP allocation of anonymous shmem pages in the following patches. Keep the same behavior (per-page fault) for non-anon shmem to avoid inflating the RSS unintentionally, and we can discuss what size of mapping to build when extending mTHP to control non-anon shmem in the future. [baolin.wang@linux.alibaba.com: avoid going beyond the PMD pagetable size] Link: https://lkml.kernel.org/r/b0e6a8b1-a32c-459e-ae67-fde5d28773e6@linux.alibaba.com [baolin.wang@linux.alibaba.com: use 'PTRS_PER_PTE' instead of 'PTRS_PER_PTE - 1'] Link: https://lkml.kernel.org/r/e1f5767a-2c9b-4e37-afe6-1de26fe54e41@linux.alibaba.com Link: https://lkml.kernel.org/r/cover.1718090413.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/3a190892355989d42f59cf9f2f98b94694b0d24d.1718090413.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-11 10:11:05 +00:00
int type, nr_pages;
unsigned long addr = vmf->address;
/* Did we COW the page? */
if (is_cow)
page = vmf->cow_page;
else
page = vmf->page;
mm, oom: fix potential data corruption when oom_reaper races with writer Wenwei Tao has noticed that our current assumption that the oom victim is dying and never doing any visible changes after it dies, and so the oom_reaper can tear it down, is not entirely true. __task_will_free_mem consider a task dying when SIGNAL_GROUP_EXIT is set but do_group_exit sends SIGKILL to all threads _after_ the flag is set. So there is a race window when some threads won't have fatal_signal_pending while the oom_reaper could start unmapping the address space. Moreover some paths might not check for fatal signals before each PF/g-u-p/copy_from_user. We already have a protection for oom_reaper vs. PF races by checking MMF_UNSTABLE. This has been, however, checked only for kernel threads (use_mm users) which can outlive the oom victim. A simple fix would be to extend the current check in handle_mm_fault for all tasks but that wouldn't be sufficient because the current check assumes that a kernel thread would bail out after EFAULT from get_user*/copy_from_user and never re-read the same address which would succeed because the PF path has established page tables already. This seems to be the case for the only existing use_mm user currently (virtio driver) but it is rather fragile in general. This is even more fragile in general for more complex paths such as generic_perform_write which can re-read the same address more times (e.g. iov_iter_copy_from_user_atomic to fail and then iov_iter_fault_in_readable on retry). Therefore we have to implement MMF_UNSTABLE protection in a robust way and never make a potentially corrupted content visible. That requires to hook deeper into the PF path and check for the flag _every time_ before a pte for anonymous memory is established (that means all !VM_SHARED mappings). The corruption can be triggered artificially (http://lkml.kernel.org/r/201708040646.v746kkhC024636@www262.sakura.ne.jp) but there doesn't seem to be any real life bug report. The race window should be quite tight to trigger most of the time. Link: http://lkml.kernel.org/r/20170807113839.16695-3-mhocko@kernel.org Fixes: aac453635549 ("mm, oom: introduce oom reaper") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Wenwei Tao <wenwei.tww@alibaba-inc.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:15 +00:00
/*
* check even for read faults because we might have lost our CoWed
* page
*/
if (!(vma->vm_flags & VM_SHARED)) {
ret = check_stable_address_space(vma->vm_mm);
if (ret)
return ret;
}
if (pmd_none(*vmf->pmd)) {
if (PageTransCompound(page)) {
ret = do_set_pmd(vmf, page);
if (ret != VM_FAULT_FALLBACK)
return ret;
}
if (vmf->prealloc_pte)
pmd_install(vma->vm_mm, vmf->pmd, &vmf->prealloc_pte);
else if (unlikely(pte_alloc(vma->vm_mm, vmf->pmd)))
return VM_FAULT_OOM;
}
mm: memory: extend finish_fault() to support large folio Patch series "add mTHP support for anonymous shmem", v5. Anonymous pages have already been supported for multi-size (mTHP) allocation through commit 19eaf44954df, that can allow THP to be configured through the sysfs interface located at '/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'. However, the anonymous shmem will ignore the anonymous mTHP rule configured through the sysfs interface, and can only use the PMD-mapped THP, that is not reasonable. Many implement anonymous page sharing through mmap(MAP_SHARED | MAP_ANONYMOUS), especially in database usage scenarios, therefore, users expect to apply an unified mTHP strategy for anonymous pages, also including the anonymous shared pages, in order to enjoy the benefits of mTHP. For example, lower latency than PMD-mapped THP, smaller memory bloat than PMD-mapped THP, contiguous PTEs on ARM architecture to reduce TLB miss etc. As discussed in the bi-weekly MM meeting[1], the mTHP controls should control all of shmem, not only anonymous shmem, but support will be added iteratively. Therefore, this patch set starts with support for anonymous shmem. The primary strategy is similar to supporting anonymous mTHP. Introduce a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled', which can have almost the same values as the top-level '/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new additional "inherit" option and dropping the testing options 'force' and 'deny'. By default all sizes will be set to "never" except PMD size, which is set to "inherit". This ensures backward compatibility with the anonymous shmem enabled of the top level, meanwhile also allows independent control of anonymous shmem enabled for each mTHP. Use the page fault latency tool to measure the performance of 1G anonymous shmem with 32 threads on my machine environment with: ARM64 Architecture, 32 cores, 125G memory: base: mm-unstable user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.04s 3.10s 83516.416 2669684.890 mm-unstable + patchset, anon shmem mTHP disabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.02s 3.14s 82936.359 2630746.027 mm-unstable + patchset, anon shmem 64K mTHP enabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.08s 0.31s 678630.231 17082522.495 From the data above, it is observed that the patchset has a minimal impact when mTHP is not enabled (some fluctuations observed during testing). When enabling 64K mTHP, there is a significant improvement of the page fault latency. [1] https://lore.kernel.org/all/f1783ff0-65bd-4b2b-8952-52b6822a0835@redhat.com/ This patch (of 6): Add large folio mapping establishment support for finish_fault() as a preparation, to support multi-size THP allocation of anonymous shmem pages in the following patches. Keep the same behavior (per-page fault) for non-anon shmem to avoid inflating the RSS unintentionally, and we can discuss what size of mapping to build when extending mTHP to control non-anon shmem in the future. [baolin.wang@linux.alibaba.com: avoid going beyond the PMD pagetable size] Link: https://lkml.kernel.org/r/b0e6a8b1-a32c-459e-ae67-fde5d28773e6@linux.alibaba.com [baolin.wang@linux.alibaba.com: use 'PTRS_PER_PTE' instead of 'PTRS_PER_PTE - 1'] Link: https://lkml.kernel.org/r/e1f5767a-2c9b-4e37-afe6-1de26fe54e41@linux.alibaba.com Link: https://lkml.kernel.org/r/cover.1718090413.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/3a190892355989d42f59cf9f2f98b94694b0d24d.1718090413.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-11 10:11:05 +00:00
folio = page_folio(page);
nr_pages = folio_nr_pages(folio);
/*
* Using per-page fault to maintain the uffd semantics, and same
* approach also applies to non-anonymous-shmem faults to avoid
* inflating the RSS of the process.
*/
if (!vma_is_anon_shmem(vma) || unlikely(userfaultfd_armed(vma))) {
nr_pages = 1;
} else if (nr_pages > 1) {
pgoff_t idx = folio_page_idx(folio, page);
/* The page offset of vmf->address within the VMA. */
pgoff_t vma_off = vmf->pgoff - vmf->vma->vm_pgoff;
/* The index of the entry in the pagetable for fault page. */
pgoff_t pte_off = pte_index(vmf->address);
/*
* Fallback to per-page fault in case the folio size in page
* cache beyond the VMA limits and PMD pagetable limits.
*/
if (unlikely(vma_off < idx ||
vma_off + (nr_pages - idx) > vma_pages(vma) ||
pte_off < idx ||
pte_off + (nr_pages - idx) > PTRS_PER_PTE)) {
nr_pages = 1;
} else {
/* Now we can set mappings for the whole large folio. */
addr = vmf->address - idx * PAGE_SIZE;
page = &folio->page;
}
}
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd,
mm: memory: extend finish_fault() to support large folio Patch series "add mTHP support for anonymous shmem", v5. Anonymous pages have already been supported for multi-size (mTHP) allocation through commit 19eaf44954df, that can allow THP to be configured through the sysfs interface located at '/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'. However, the anonymous shmem will ignore the anonymous mTHP rule configured through the sysfs interface, and can only use the PMD-mapped THP, that is not reasonable. Many implement anonymous page sharing through mmap(MAP_SHARED | MAP_ANONYMOUS), especially in database usage scenarios, therefore, users expect to apply an unified mTHP strategy for anonymous pages, also including the anonymous shared pages, in order to enjoy the benefits of mTHP. For example, lower latency than PMD-mapped THP, smaller memory bloat than PMD-mapped THP, contiguous PTEs on ARM architecture to reduce TLB miss etc. As discussed in the bi-weekly MM meeting[1], the mTHP controls should control all of shmem, not only anonymous shmem, but support will be added iteratively. Therefore, this patch set starts with support for anonymous shmem. The primary strategy is similar to supporting anonymous mTHP. Introduce a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled', which can have almost the same values as the top-level '/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new additional "inherit" option and dropping the testing options 'force' and 'deny'. By default all sizes will be set to "never" except PMD size, which is set to "inherit". This ensures backward compatibility with the anonymous shmem enabled of the top level, meanwhile also allows independent control of anonymous shmem enabled for each mTHP. Use the page fault latency tool to measure the performance of 1G anonymous shmem with 32 threads on my machine environment with: ARM64 Architecture, 32 cores, 125G memory: base: mm-unstable user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.04s 3.10s 83516.416 2669684.890 mm-unstable + patchset, anon shmem mTHP disabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.02s 3.14s 82936.359 2630746.027 mm-unstable + patchset, anon shmem 64K mTHP enabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.08s 0.31s 678630.231 17082522.495 From the data above, it is observed that the patchset has a minimal impact when mTHP is not enabled (some fluctuations observed during testing). When enabling 64K mTHP, there is a significant improvement of the page fault latency. [1] https://lore.kernel.org/all/f1783ff0-65bd-4b2b-8952-52b6822a0835@redhat.com/ This patch (of 6): Add large folio mapping establishment support for finish_fault() as a preparation, to support multi-size THP allocation of anonymous shmem pages in the following patches. Keep the same behavior (per-page fault) for non-anon shmem to avoid inflating the RSS unintentionally, and we can discuss what size of mapping to build when extending mTHP to control non-anon shmem in the future. [baolin.wang@linux.alibaba.com: avoid going beyond the PMD pagetable size] Link: https://lkml.kernel.org/r/b0e6a8b1-a32c-459e-ae67-fde5d28773e6@linux.alibaba.com [baolin.wang@linux.alibaba.com: use 'PTRS_PER_PTE' instead of 'PTRS_PER_PTE - 1'] Link: https://lkml.kernel.org/r/e1f5767a-2c9b-4e37-afe6-1de26fe54e41@linux.alibaba.com Link: https://lkml.kernel.org/r/cover.1718090413.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/3a190892355989d42f59cf9f2f98b94694b0d24d.1718090413.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-11 10:11:05 +00:00
addr, &vmf->ptl);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (!vmf->pte)
return VM_FAULT_NOPAGE;
mm: bring back update_mmu_cache() to finish_fault() Running this test program on ARMv4 a few times (sometimes just once) reproduces the bug. int main() { unsigned i; char paragon[SIZE]; void* ptr; memset(paragon, 0xAA, SIZE); ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_ANON | MAP_SHARED, -1, 0); if (ptr == MAP_FAILED) return 1; printf("ptr = %p\n", ptr); for (i=0;i<10000;i++){ memset(ptr, 0xAA, SIZE); if (memcmp(ptr, paragon, SIZE)) { printf("Unexpected bytes on iteration %u!!!\n", i); break; } } munmap(ptr, SIZE); } In the "ptr" buffer there appear runs of zero bytes which are aligned by 16 and their lengths are multiple of 16. Linux v5.11 does not have the bug, "git bisect" finds the first bad commit: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths") Before the commit update_mmu_cache() was called during a call to filemap_map_pages() as well as finish_fault(). After the commit finish_fault() lacks it. Bring back update_mmu_cache() to finish_fault() to fix the bug. Also call update_mmu_tlb() only when returning VM_FAULT_NOPAGE to more closely reproduce the code of alloc_set_pte() function that existed before the commit. On many platforms update_mmu_cache() is nop: x86, see arch/x86/include/asm/pgtable ARMv6+, see arch/arm/include/asm/tlbflush.h So, it seems, few users ran into this bug. Link: https://lkml.kernel.org/r/20220908204809.2012451-1-saproj@gmail.com Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths") Signed-off-by: Sergei Antonov <saproj@gmail.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-08 20:48:09 +00:00
/* Re-check under ptl */
mm: memory: extend finish_fault() to support large folio Patch series "add mTHP support for anonymous shmem", v5. Anonymous pages have already been supported for multi-size (mTHP) allocation through commit 19eaf44954df, that can allow THP to be configured through the sysfs interface located at '/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'. However, the anonymous shmem will ignore the anonymous mTHP rule configured through the sysfs interface, and can only use the PMD-mapped THP, that is not reasonable. Many implement anonymous page sharing through mmap(MAP_SHARED | MAP_ANONYMOUS), especially in database usage scenarios, therefore, users expect to apply an unified mTHP strategy for anonymous pages, also including the anonymous shared pages, in order to enjoy the benefits of mTHP. For example, lower latency than PMD-mapped THP, smaller memory bloat than PMD-mapped THP, contiguous PTEs on ARM architecture to reduce TLB miss etc. As discussed in the bi-weekly MM meeting[1], the mTHP controls should control all of shmem, not only anonymous shmem, but support will be added iteratively. Therefore, this patch set starts with support for anonymous shmem. The primary strategy is similar to supporting anonymous mTHP. Introduce a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled', which can have almost the same values as the top-level '/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new additional "inherit" option and dropping the testing options 'force' and 'deny'. By default all sizes will be set to "never" except PMD size, which is set to "inherit". This ensures backward compatibility with the anonymous shmem enabled of the top level, meanwhile also allows independent control of anonymous shmem enabled for each mTHP. Use the page fault latency tool to measure the performance of 1G anonymous shmem with 32 threads on my machine environment with: ARM64 Architecture, 32 cores, 125G memory: base: mm-unstable user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.04s 3.10s 83516.416 2669684.890 mm-unstable + patchset, anon shmem mTHP disabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.02s 3.14s 82936.359 2630746.027 mm-unstable + patchset, anon shmem 64K mTHP enabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.08s 0.31s 678630.231 17082522.495 From the data above, it is observed that the patchset has a minimal impact when mTHP is not enabled (some fluctuations observed during testing). When enabling 64K mTHP, there is a significant improvement of the page fault latency. [1] https://lore.kernel.org/all/f1783ff0-65bd-4b2b-8952-52b6822a0835@redhat.com/ This patch (of 6): Add large folio mapping establishment support for finish_fault() as a preparation, to support multi-size THP allocation of anonymous shmem pages in the following patches. Keep the same behavior (per-page fault) for non-anon shmem to avoid inflating the RSS unintentionally, and we can discuss what size of mapping to build when extending mTHP to control non-anon shmem in the future. [baolin.wang@linux.alibaba.com: avoid going beyond the PMD pagetable size] Link: https://lkml.kernel.org/r/b0e6a8b1-a32c-459e-ae67-fde5d28773e6@linux.alibaba.com [baolin.wang@linux.alibaba.com: use 'PTRS_PER_PTE' instead of 'PTRS_PER_PTE - 1'] Link: https://lkml.kernel.org/r/e1f5767a-2c9b-4e37-afe6-1de26fe54e41@linux.alibaba.com Link: https://lkml.kernel.org/r/cover.1718090413.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/3a190892355989d42f59cf9f2f98b94694b0d24d.1718090413.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-11 10:11:05 +00:00
if (nr_pages == 1 && unlikely(vmf_pte_changed(vmf))) {
update_mmu_tlb(vma, addr, vmf->pte);
ret = VM_FAULT_NOPAGE;
mm: memory: extend finish_fault() to support large folio Patch series "add mTHP support for anonymous shmem", v5. Anonymous pages have already been supported for multi-size (mTHP) allocation through commit 19eaf44954df, that can allow THP to be configured through the sysfs interface located at '/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'. However, the anonymous shmem will ignore the anonymous mTHP rule configured through the sysfs interface, and can only use the PMD-mapped THP, that is not reasonable. Many implement anonymous page sharing through mmap(MAP_SHARED | MAP_ANONYMOUS), especially in database usage scenarios, therefore, users expect to apply an unified mTHP strategy for anonymous pages, also including the anonymous shared pages, in order to enjoy the benefits of mTHP. For example, lower latency than PMD-mapped THP, smaller memory bloat than PMD-mapped THP, contiguous PTEs on ARM architecture to reduce TLB miss etc. As discussed in the bi-weekly MM meeting[1], the mTHP controls should control all of shmem, not only anonymous shmem, but support will be added iteratively. Therefore, this patch set starts with support for anonymous shmem. The primary strategy is similar to supporting anonymous mTHP. Introduce a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled', which can have almost the same values as the top-level '/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new additional "inherit" option and dropping the testing options 'force' and 'deny'. By default all sizes will be set to "never" except PMD size, which is set to "inherit". This ensures backward compatibility with the anonymous shmem enabled of the top level, meanwhile also allows independent control of anonymous shmem enabled for each mTHP. Use the page fault latency tool to measure the performance of 1G anonymous shmem with 32 threads on my machine environment with: ARM64 Architecture, 32 cores, 125G memory: base: mm-unstable user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.04s 3.10s 83516.416 2669684.890 mm-unstable + patchset, anon shmem mTHP disabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.02s 3.14s 82936.359 2630746.027 mm-unstable + patchset, anon shmem 64K mTHP enabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.08s 0.31s 678630.231 17082522.495 From the data above, it is observed that the patchset has a minimal impact when mTHP is not enabled (some fluctuations observed during testing). When enabling 64K mTHP, there is a significant improvement of the page fault latency. [1] https://lore.kernel.org/all/f1783ff0-65bd-4b2b-8952-52b6822a0835@redhat.com/ This patch (of 6): Add large folio mapping establishment support for finish_fault() as a preparation, to support multi-size THP allocation of anonymous shmem pages in the following patches. Keep the same behavior (per-page fault) for non-anon shmem to avoid inflating the RSS unintentionally, and we can discuss what size of mapping to build when extending mTHP to control non-anon shmem in the future. [baolin.wang@linux.alibaba.com: avoid going beyond the PMD pagetable size] Link: https://lkml.kernel.org/r/b0e6a8b1-a32c-459e-ae67-fde5d28773e6@linux.alibaba.com [baolin.wang@linux.alibaba.com: use 'PTRS_PER_PTE' instead of 'PTRS_PER_PTE - 1'] Link: https://lkml.kernel.org/r/e1f5767a-2c9b-4e37-afe6-1de26fe54e41@linux.alibaba.com Link: https://lkml.kernel.org/r/cover.1718090413.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/3a190892355989d42f59cf9f2f98b94694b0d24d.1718090413.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-11 10:11:05 +00:00
goto unlock;
} else if (nr_pages > 1 && !pte_range_none(vmf->pte, nr_pages)) {
update_mmu_tlb_range(vma, addr, vmf->pte, nr_pages);
ret = VM_FAULT_NOPAGE;
goto unlock;
mm: bring back update_mmu_cache() to finish_fault() Running this test program on ARMv4 a few times (sometimes just once) reproduces the bug. int main() { unsigned i; char paragon[SIZE]; void* ptr; memset(paragon, 0xAA, SIZE); ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_ANON | MAP_SHARED, -1, 0); if (ptr == MAP_FAILED) return 1; printf("ptr = %p\n", ptr); for (i=0;i<10000;i++){ memset(ptr, 0xAA, SIZE); if (memcmp(ptr, paragon, SIZE)) { printf("Unexpected bytes on iteration %u!!!\n", i); break; } } munmap(ptr, SIZE); } In the "ptr" buffer there appear runs of zero bytes which are aligned by 16 and their lengths are multiple of 16. Linux v5.11 does not have the bug, "git bisect" finds the first bad commit: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths") Before the commit update_mmu_cache() was called during a call to filemap_map_pages() as well as finish_fault(). After the commit finish_fault() lacks it. Bring back update_mmu_cache() to finish_fault() to fix the bug. Also call update_mmu_tlb() only when returning VM_FAULT_NOPAGE to more closely reproduce the code of alloc_set_pte() function that existed before the commit. On many platforms update_mmu_cache() is nop: x86, see arch/x86/include/asm/pgtable ARMv6+, see arch/arm/include/asm/tlbflush.h So, it seems, few users ran into this bug. Link: https://lkml.kernel.org/r/20220908204809.2012451-1-saproj@gmail.com Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths") Signed-off-by: Sergei Antonov <saproj@gmail.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-08 20:48:09 +00:00
}
mm: memory: extend finish_fault() to support large folio Patch series "add mTHP support for anonymous shmem", v5. Anonymous pages have already been supported for multi-size (mTHP) allocation through commit 19eaf44954df, that can allow THP to be configured through the sysfs interface located at '/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'. However, the anonymous shmem will ignore the anonymous mTHP rule configured through the sysfs interface, and can only use the PMD-mapped THP, that is not reasonable. Many implement anonymous page sharing through mmap(MAP_SHARED | MAP_ANONYMOUS), especially in database usage scenarios, therefore, users expect to apply an unified mTHP strategy for anonymous pages, also including the anonymous shared pages, in order to enjoy the benefits of mTHP. For example, lower latency than PMD-mapped THP, smaller memory bloat than PMD-mapped THP, contiguous PTEs on ARM architecture to reduce TLB miss etc. As discussed in the bi-weekly MM meeting[1], the mTHP controls should control all of shmem, not only anonymous shmem, but support will be added iteratively. Therefore, this patch set starts with support for anonymous shmem. The primary strategy is similar to supporting anonymous mTHP. Introduce a new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled', which can have almost the same values as the top-level '/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new additional "inherit" option and dropping the testing options 'force' and 'deny'. By default all sizes will be set to "never" except PMD size, which is set to "inherit". This ensures backward compatibility with the anonymous shmem enabled of the top level, meanwhile also allows independent control of anonymous shmem enabled for each mTHP. Use the page fault latency tool to measure the performance of 1G anonymous shmem with 32 threads on my machine environment with: ARM64 Architecture, 32 cores, 125G memory: base: mm-unstable user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.04s 3.10s 83516.416 2669684.890 mm-unstable + patchset, anon shmem mTHP disabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.02s 3.14s 82936.359 2630746.027 mm-unstable + patchset, anon shmem 64K mTHP enabled user-time sys_time faults_per_sec_per_cpu faults_per_sec 0.08s 0.31s 678630.231 17082522.495 From the data above, it is observed that the patchset has a minimal impact when mTHP is not enabled (some fluctuations observed during testing). When enabling 64K mTHP, there is a significant improvement of the page fault latency. [1] https://lore.kernel.org/all/f1783ff0-65bd-4b2b-8952-52b6822a0835@redhat.com/ This patch (of 6): Add large folio mapping establishment support for finish_fault() as a preparation, to support multi-size THP allocation of anonymous shmem pages in the following patches. Keep the same behavior (per-page fault) for non-anon shmem to avoid inflating the RSS unintentionally, and we can discuss what size of mapping to build when extending mTHP to control non-anon shmem in the future. [baolin.wang@linux.alibaba.com: avoid going beyond the PMD pagetable size] Link: https://lkml.kernel.org/r/b0e6a8b1-a32c-459e-ae67-fde5d28773e6@linux.alibaba.com [baolin.wang@linux.alibaba.com: use 'PTRS_PER_PTE' instead of 'PTRS_PER_PTE - 1'] Link: https://lkml.kernel.org/r/e1f5767a-2c9b-4e37-afe6-1de26fe54e41@linux.alibaba.com Link: https://lkml.kernel.org/r/cover.1718090413.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/3a190892355989d42f59cf9f2f98b94694b0d24d.1718090413.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-11 10:11:05 +00:00
folio_ref_add(folio, nr_pages - 1);
set_pte_range(vmf, folio, page, nr_pages, addr);
type = is_cow ? MM_ANONPAGES : mm_counter_file(folio);
add_mm_counter(vma->vm_mm, type, nr_pages);
ret = 0;
unlock:
pte_unmap_unlock(vmf->pte, vmf->ptl);
return ret;
}
static unsigned long fault_around_pages __read_mostly =
65536 >> PAGE_SHIFT;
#ifdef CONFIG_DEBUG_FS
static int fault_around_bytes_get(void *data, u64 *val)
{
*val = fault_around_pages << PAGE_SHIFT;
return 0;
}
/*
* fault_around_bytes must be rounded down to the nearest page order as it's
* what do_fault_around() expects to see.
*/
static int fault_around_bytes_set(void *data, u64 val)
{
if (val / PAGE_SIZE > PTRS_PER_PTE)
return -EINVAL;
/*
* The minimum value is 1 page, however this results in no fault-around
* at all. See should_fault_around().
*/
mm: memory: fix shift-out-of-bounds in fault_around_bytes_set The rounddown_pow_of_two(0) is undefined, so val = 0 is not allowed in the fault_around_bytes_set(), and leads to shift-out-of-bounds, UBSAN: shift-out-of-bounds in include/linux/log2.h:67:13 shift exponent 4294967295 is too large for 64-bit type 'long unsigned int' CPU: 7 PID: 107 Comm: sh Not tainted 6.8.0-rc6-next-20240301 #294 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 dump_stack+0x18/0x24 ubsan_epilogue+0x10/0x44 __ubsan_handle_shift_out_of_bounds+0x98/0x134 fault_around_bytes_set+0xa4/0xb0 simple_attr_write_xsigned.isra.0+0xe4/0x1ac simple_attr_write+0x18/0x24 debugfs_attr_write+0x4c/0x98 vfs_write+0xd0/0x4b0 ksys_write+0x6c/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xdc el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194 ---[ end trace ]--- Fix it by setting the minimum val to PAGE_SIZE. Link: https://lkml.kernel.org/r/20240302064312.2358924-1-wangkefeng.wang@huawei.com Fixes: 53d36a56d8c4 ("mm: prefer fault_around_pages to fault_around_bytes") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by: Yue Sun <samsun1006219@gmail.com> Closes: https://lore.kernel.org/all/CAEkJfYPim6DQqW1GqCiHLdh2-eweqk1fGyXqs3JM+8e1qGge8w@mail.gmail.com/ Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-02 06:43:12 +00:00
val = max(val, PAGE_SIZE);
fault_around_pages = rounddown_pow_of_two(val) >> PAGE_SHIFT;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fault_around_bytes_fops,
fault_around_bytes_get, fault_around_bytes_set, "%llu\n");
static int __init fault_around_debugfs(void)
{
debugfs_create_file_unsafe("fault_around_bytes", 0644, NULL, NULL,
&fault_around_bytes_fops);
return 0;
}
late_initcall(fault_around_debugfs);
#endif
mm: introduce vm_ops->map_pages() Here's new version of faultaround patchset. It took a while to tune it and collect performance data. First patch adds new callback ->map_pages to vm_operations_struct. ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "pgoff" till "max_pgoff". ->map_pages() is called with page table locked and must not block. If it's not possible to reach a page without blocking, filesystem should skip it. Filesystem should use do_set_pte() to setup page table entry. Pointer to entry associated with offset "pgoff" is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". Currently VM use ->map_pages only on read page fault path. We try to map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now. Performance data for different FAULT_AROUND_ORDER is below. TODO: - implement ->map_pages() for shmem/tmpfs; - modify get_user_pages() to be able to use ->map_pages() and implement mmap(MAP_POPULATE|MAP_NONBLOCK) on top. ========================================================================= Tested on 4-socket machine (120 threads) with 128GiB of RAM. Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is somewhere between 3 and 5. Let's say 4 :) Linux build (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485 time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358 Linux rebuild (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643 time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095 Git test suite (make -j60 test) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515 time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413 Two synthetic tests: access every word in file in sequential/random order. It doesn't improve much after FAULT_AROUND_ORDER == 4. Sequential access 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282 time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856 8 threads minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339 time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528 32 threads minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200 time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797 60 threads minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217 time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902 120 threads minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862 time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622 Random access 1GiB file 1 thread minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222 time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994 8 threads minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384 time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804 32 threads minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881 time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690 60 threads minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691 time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273 120 threads minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010 time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594 Touch only one page in page table in 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237 time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386 8 threads minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596 time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984 32 threads minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183 time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559 60 threads minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825 time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938 120 threads minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164 time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125 This patch (of 2): Introduce new vm_ops callback ->map_pages() and uses it for mapping easy accessible pages around fault address. On read page fault, if filesystem provides ->map_pages(), we try to map up to FAULT_AROUND_PAGES pages around page fault address in hope to reduce number of minor page faults. We call ->map_pages first and use ->fault() as fallback if page by the offset is not ready to be mapped (cold page cache or something). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:18 +00:00
/*
* do_fault_around() tries to map few pages around the fault address. The hope
* is that the pages will be needed soon and this will lower the number of
* faults to handle.
*
* It uses vm_ops->map_pages() to map the pages, which skips the page if it's
* not ready to be mapped: not up-to-date, locked, etc.
*
* This function doesn't cross VMA or page table boundaries, in order to call
* map_pages() and acquire a PTE lock only once.
*
* fault_around_pages defines how many pages we'll try to map.
* do_fault_around() expects it to be set to a power of two less than or equal
* to PTRS_PER_PTE.
*
* The virtual address of the area that we map is naturally aligned to
* fault_around_pages * PAGE_SIZE rounded down to the machine page size
* (and therefore to page order). This way it's easier to guarantee
* that we don't cross page table boundaries.
*/
static vm_fault_t do_fault_around(struct vm_fault *vmf)
mm: introduce vm_ops->map_pages() Here's new version of faultaround patchset. It took a while to tune it and collect performance data. First patch adds new callback ->map_pages to vm_operations_struct. ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "pgoff" till "max_pgoff". ->map_pages() is called with page table locked and must not block. If it's not possible to reach a page without blocking, filesystem should skip it. Filesystem should use do_set_pte() to setup page table entry. Pointer to entry associated with offset "pgoff" is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". Currently VM use ->map_pages only on read page fault path. We try to map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now. Performance data for different FAULT_AROUND_ORDER is below. TODO: - implement ->map_pages() for shmem/tmpfs; - modify get_user_pages() to be able to use ->map_pages() and implement mmap(MAP_POPULATE|MAP_NONBLOCK) on top. ========================================================================= Tested on 4-socket machine (120 threads) with 128GiB of RAM. Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is somewhere between 3 and 5. Let's say 4 :) Linux build (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485 time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358 Linux rebuild (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643 time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095 Git test suite (make -j60 test) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515 time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413 Two synthetic tests: access every word in file in sequential/random order. It doesn't improve much after FAULT_AROUND_ORDER == 4. Sequential access 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282 time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856 8 threads minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339 time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528 32 threads minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200 time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797 60 threads minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217 time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902 120 threads minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862 time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622 Random access 1GiB file 1 thread minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222 time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994 8 threads minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384 time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804 32 threads minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881 time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690 60 threads minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691 time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273 120 threads minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010 time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594 Touch only one page in page table in 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237 time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386 8 threads minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596 time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984 32 threads minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183 time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559 60 threads minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825 time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938 120 threads minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164 time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125 This patch (of 2): Introduce new vm_ops callback ->map_pages() and uses it for mapping easy accessible pages around fault address. On read page fault, if filesystem provides ->map_pages(), we try to map up to FAULT_AROUND_PAGES pages around page fault address in hope to reduce number of minor page faults. We call ->map_pages first and use ->fault() as fallback if page by the offset is not ready to be mapped (cold page cache or something). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:18 +00:00
{
pgoff_t nr_pages = READ_ONCE(fault_around_pages);
pgoff_t pte_off = pte_index(vmf->address);
/* The page offset of vmf->address within the VMA. */
pgoff_t vma_off = vmf->pgoff - vmf->vma->vm_pgoff;
pgoff_t from_pte, to_pte;
vm_fault_t ret;
mm: introduce vm_ops->map_pages() Here's new version of faultaround patchset. It took a while to tune it and collect performance data. First patch adds new callback ->map_pages to vm_operations_struct. ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "pgoff" till "max_pgoff". ->map_pages() is called with page table locked and must not block. If it's not possible to reach a page without blocking, filesystem should skip it. Filesystem should use do_set_pte() to setup page table entry. Pointer to entry associated with offset "pgoff" is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". Currently VM use ->map_pages only on read page fault path. We try to map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now. Performance data for different FAULT_AROUND_ORDER is below. TODO: - implement ->map_pages() for shmem/tmpfs; - modify get_user_pages() to be able to use ->map_pages() and implement mmap(MAP_POPULATE|MAP_NONBLOCK) on top. ========================================================================= Tested on 4-socket machine (120 threads) with 128GiB of RAM. Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is somewhere between 3 and 5. Let's say 4 :) Linux build (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485 time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358 Linux rebuild (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643 time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095 Git test suite (make -j60 test) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515 time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413 Two synthetic tests: access every word in file in sequential/random order. It doesn't improve much after FAULT_AROUND_ORDER == 4. Sequential access 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282 time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856 8 threads minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339 time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528 32 threads minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200 time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797 60 threads minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217 time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902 120 threads minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862 time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622 Random access 1GiB file 1 thread minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222 time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994 8 threads minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384 time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804 32 threads minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881 time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690 60 threads minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691 time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273 120 threads minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010 time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594 Touch only one page in page table in 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237 time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386 8 threads minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596 time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984 32 threads minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183 time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559 60 threads minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825 time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938 120 threads minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164 time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125 This patch (of 2): Introduce new vm_ops callback ->map_pages() and uses it for mapping easy accessible pages around fault address. On read page fault, if filesystem provides ->map_pages(), we try to map up to FAULT_AROUND_PAGES pages around page fault address in hope to reduce number of minor page faults. We call ->map_pages first and use ->fault() as fallback if page by the offset is not ready to be mapped (cold page cache or something). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:18 +00:00
/* The PTE offset of the start address, clamped to the VMA. */
from_pte = max(ALIGN_DOWN(pte_off, nr_pages),
pte_off - min(pte_off, vma_off));
/* The PTE offset of the end address, clamped to the VMA and PTE. */
to_pte = min3(from_pte + nr_pages, (pgoff_t)PTRS_PER_PTE,
pte_off + vma_pages(vmf->vma) - vma_off) - 1;
mm: introduce vm_ops->map_pages() Here's new version of faultaround patchset. It took a while to tune it and collect performance data. First patch adds new callback ->map_pages to vm_operations_struct. ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "pgoff" till "max_pgoff". ->map_pages() is called with page table locked and must not block. If it's not possible to reach a page without blocking, filesystem should skip it. Filesystem should use do_set_pte() to setup page table entry. Pointer to entry associated with offset "pgoff" is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". Currently VM use ->map_pages only on read page fault path. We try to map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now. Performance data for different FAULT_AROUND_ORDER is below. TODO: - implement ->map_pages() for shmem/tmpfs; - modify get_user_pages() to be able to use ->map_pages() and implement mmap(MAP_POPULATE|MAP_NONBLOCK) on top. ========================================================================= Tested on 4-socket machine (120 threads) with 128GiB of RAM. Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is somewhere between 3 and 5. Let's say 4 :) Linux build (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485 time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358 Linux rebuild (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643 time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095 Git test suite (make -j60 test) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515 time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413 Two synthetic tests: access every word in file in sequential/random order. It doesn't improve much after FAULT_AROUND_ORDER == 4. Sequential access 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282 time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856 8 threads minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339 time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528 32 threads minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200 time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797 60 threads minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217 time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902 120 threads minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862 time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622 Random access 1GiB file 1 thread minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222 time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994 8 threads minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384 time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804 32 threads minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881 time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690 60 threads minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691 time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273 120 threads minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010 time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594 Touch only one page in page table in 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237 time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386 8 threads minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596 time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984 32 threads minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183 time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559 60 threads minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825 time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938 120 threads minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164 time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125 This patch (of 2): Introduce new vm_ops callback ->map_pages() and uses it for mapping easy accessible pages around fault address. On read page fault, if filesystem provides ->map_pages(), we try to map up to FAULT_AROUND_PAGES pages around page fault address in hope to reduce number of minor page faults. We call ->map_pages first and use ->fault() as fallback if page by the offset is not ready to be mapped (cold page cache or something). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:18 +00:00
if (pmd_none(*vmf->pmd)) {
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 23:28:34 +00:00
vmf->prealloc_pte = pte_alloc_one(vmf->vma->vm_mm);
if (!vmf->prealloc_pte)
return VM_FAULT_OOM;
mm: introduce vm_ops->map_pages() Here's new version of faultaround patchset. It took a while to tune it and collect performance data. First patch adds new callback ->map_pages to vm_operations_struct. ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "pgoff" till "max_pgoff". ->map_pages() is called with page table locked and must not block. If it's not possible to reach a page without blocking, filesystem should skip it. Filesystem should use do_set_pte() to setup page table entry. Pointer to entry associated with offset "pgoff" is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". Currently VM use ->map_pages only on read page fault path. We try to map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now. Performance data for different FAULT_AROUND_ORDER is below. TODO: - implement ->map_pages() for shmem/tmpfs; - modify get_user_pages() to be able to use ->map_pages() and implement mmap(MAP_POPULATE|MAP_NONBLOCK) on top. ========================================================================= Tested on 4-socket machine (120 threads) with 128GiB of RAM. Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is somewhere between 3 and 5. Let's say 4 :) Linux build (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485 time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358 Linux rebuild (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643 time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095 Git test suite (make -j60 test) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515 time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413 Two synthetic tests: access every word in file in sequential/random order. It doesn't improve much after FAULT_AROUND_ORDER == 4. Sequential access 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282 time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856 8 threads minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339 time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528 32 threads minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200 time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797 60 threads minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217 time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902 120 threads minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862 time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622 Random access 1GiB file 1 thread minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222 time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994 8 threads minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384 time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804 32 threads minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881 time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690 60 threads minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691 time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273 120 threads minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010 time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594 Touch only one page in page table in 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237 time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386 8 threads minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596 time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984 32 threads minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183 time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559 60 threads minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825 time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938 120 threads minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164 time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125 This patch (of 2): Introduce new vm_ops callback ->map_pages() and uses it for mapping easy accessible pages around fault address. On read page fault, if filesystem provides ->map_pages(), we try to map up to FAULT_AROUND_PAGES pages around page fault address in hope to reduce number of minor page faults. We call ->map_pages first and use ->fault() as fallback if page by the offset is not ready to be mapped (cold page cache or something). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:18 +00:00
}
rcu_read_lock();
ret = vmf->vma->vm_ops->map_pages(vmf,
vmf->pgoff + from_pte - pte_off,
vmf->pgoff + to_pte - pte_off);
rcu_read_unlock();
return ret;
mm: introduce vm_ops->map_pages() Here's new version of faultaround patchset. It took a while to tune it and collect performance data. First patch adds new callback ->map_pages to vm_operations_struct. ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "pgoff" till "max_pgoff". ->map_pages() is called with page table locked and must not block. If it's not possible to reach a page without blocking, filesystem should skip it. Filesystem should use do_set_pte() to setup page table entry. Pointer to entry associated with offset "pgoff" is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". Currently VM use ->map_pages only on read page fault path. We try to map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now. Performance data for different FAULT_AROUND_ORDER is below. TODO: - implement ->map_pages() for shmem/tmpfs; - modify get_user_pages() to be able to use ->map_pages() and implement mmap(MAP_POPULATE|MAP_NONBLOCK) on top. ========================================================================= Tested on 4-socket machine (120 threads) with 128GiB of RAM. Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is somewhere between 3 and 5. Let's say 4 :) Linux build (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485 time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358 Linux rebuild (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643 time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095 Git test suite (make -j60 test) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515 time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413 Two synthetic tests: access every word in file in sequential/random order. It doesn't improve much after FAULT_AROUND_ORDER == 4. Sequential access 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282 time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856 8 threads minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339 time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528 32 threads minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200 time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797 60 threads minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217 time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902 120 threads minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862 time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622 Random access 1GiB file 1 thread minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222 time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994 8 threads minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384 time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804 32 threads minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881 time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690 60 threads minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691 time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273 120 threads minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010 time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594 Touch only one page in page table in 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237 time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386 8 threads minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596 time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984 32 threads minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183 time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559 60 threads minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825 time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938 120 threads minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164 time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125 This patch (of 2): Introduce new vm_ops callback ->map_pages() and uses it for mapping easy accessible pages around fault address. On read page fault, if filesystem provides ->map_pages(), we try to map up to FAULT_AROUND_PAGES pages around page fault address in hope to reduce number of minor page faults. We call ->map_pages first and use ->fault() as fallback if page by the offset is not ready to be mapped (cold page cache or something). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:18 +00:00
}
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
/* Return true if we should do read fault-around, false otherwise */
static inline bool should_fault_around(struct vm_fault *vmf)
{
/* No ->map_pages? No way to fault around... */
if (!vmf->vma->vm_ops->map_pages)
return false;
if (uffd_disable_fault_around(vmf->vma))
return false;
/* A single page implies no faulting 'around' at all. */
return fault_around_pages > 1;
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
}
static vm_fault_t do_read_fault(struct vm_fault *vmf)
{
vm_fault_t ret = 0;
struct folio *folio;
mm: introduce vm_ops->map_pages() Here's new version of faultaround patchset. It took a while to tune it and collect performance data. First patch adds new callback ->map_pages to vm_operations_struct. ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "pgoff" till "max_pgoff". ->map_pages() is called with page table locked and must not block. If it's not possible to reach a page without blocking, filesystem should skip it. Filesystem should use do_set_pte() to setup page table entry. Pointer to entry associated with offset "pgoff" is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". Currently VM use ->map_pages only on read page fault path. We try to map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now. Performance data for different FAULT_AROUND_ORDER is below. TODO: - implement ->map_pages() for shmem/tmpfs; - modify get_user_pages() to be able to use ->map_pages() and implement mmap(MAP_POPULATE|MAP_NONBLOCK) on top. ========================================================================= Tested on 4-socket machine (120 threads) with 128GiB of RAM. Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is somewhere between 3 and 5. Let's say 4 :) Linux build (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485 time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358 Linux rebuild (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643 time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095 Git test suite (make -j60 test) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515 time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413 Two synthetic tests: access every word in file in sequential/random order. It doesn't improve much after FAULT_AROUND_ORDER == 4. Sequential access 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282 time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856 8 threads minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339 time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528 32 threads minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200 time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797 60 threads minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217 time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902 120 threads minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862 time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622 Random access 1GiB file 1 thread minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222 time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994 8 threads minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384 time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804 32 threads minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881 time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690 60 threads minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691 time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273 120 threads minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010 time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594 Touch only one page in page table in 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237 time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386 8 threads minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596 time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984 32 threads minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183 time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559 60 threads minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825 time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938 120 threads minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164 time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125 This patch (of 2): Introduce new vm_ops callback ->map_pages() and uses it for mapping easy accessible pages around fault address. On read page fault, if filesystem provides ->map_pages(), we try to map up to FAULT_AROUND_PAGES pages around page fault address in hope to reduce number of minor page faults. We call ->map_pages first and use ->fault() as fallback if page by the offset is not ready to be mapped (cold page cache or something). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:18 +00:00
/*
* Let's call ->map_pages() first and use ->fault() as fallback
* if page by the offset is not ready to be mapped (cold cache or
* something).
*/
mm/shmem: handle uffd-wp special pte in page fault handler File-backed memories are prone to unmap/swap so the ptes are always unstable, because they can be easily faulted back later using the page cache. This could lead to uffd-wp getting lost when unmapping or swapping out such memory. One example is shmem. PTE markers are needed to store those information. This patch prepares it by handling uffd-wp pte markers first it is applied elsewhere, so that the page fault handler can recognize uffd-wp pte markers. The handling of uffd-wp pte markers is similar to missing fault, it's just that we'll handle this "missing fault" when we see the pte markers, meanwhile we need to make sure the marker information is kept during processing the fault. This is a slow path of uffd-wp handling, because zapping of wr-protected shmem ptes should be rare. So far it should only trigger in two conditions: (1) When trying to punch holes in shmem_fallocate(), there is an optimization to zap the pgtables before evicting the page. (2) When swapping out shmem pages. Because of this, the page fault handling is simplifed too by not sending the wr-protect message in the 1st page fault, instead the page will be installed read-only, so the uffd-wp message will be generated in the next fault, which will trigger the do_wp_page() path of general uffd-wp handling. Disable fault-around for all uffd-wp registered ranges for extra safety just like uffd-minor fault, and clean the code up. Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:53 +00:00
if (should_fault_around(vmf)) {
ret = do_fault_around(vmf);
if (ret)
return ret;
mm: introduce vm_ops->map_pages() Here's new version of faultaround patchset. It took a while to tune it and collect performance data. First patch adds new callback ->map_pages to vm_operations_struct. ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "pgoff" till "max_pgoff". ->map_pages() is called with page table locked and must not block. If it's not possible to reach a page without blocking, filesystem should skip it. Filesystem should use do_set_pte() to setup page table entry. Pointer to entry associated with offset "pgoff" is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". Currently VM use ->map_pages only on read page fault path. We try to map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now. Performance data for different FAULT_AROUND_ORDER is below. TODO: - implement ->map_pages() for shmem/tmpfs; - modify get_user_pages() to be able to use ->map_pages() and implement mmap(MAP_POPULATE|MAP_NONBLOCK) on top. ========================================================================= Tested on 4-socket machine (120 threads) with 128GiB of RAM. Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is somewhere between 3 and 5. Let's say 4 :) Linux build (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485 time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358 Linux rebuild (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643 time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095 Git test suite (make -j60 test) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515 time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413 Two synthetic tests: access every word in file in sequential/random order. It doesn't improve much after FAULT_AROUND_ORDER == 4. Sequential access 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282 time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856 8 threads minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339 time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528 32 threads minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200 time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797 60 threads minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217 time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902 120 threads minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862 time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622 Random access 1GiB file 1 thread minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222 time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994 8 threads minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384 time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804 32 threads minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881 time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690 60 threads minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691 time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273 120 threads minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010 time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594 Touch only one page in page table in 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237 time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386 8 threads minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596 time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984 32 threads minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183 time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559 60 threads minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825 time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938 120 threads minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164 time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125 This patch (of 2): Introduce new vm_ops callback ->map_pages() and uses it for mapping easy accessible pages around fault address. On read page fault, if filesystem provides ->map_pages(), we try to map up to FAULT_AROUND_PAGES pages around page fault address in hope to reduce number of minor page faults. We call ->map_pages first and use ->fault() as fallback if page by the offset is not ready to be mapped (cold page cache or something). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:37:18 +00:00
}
ret = vmf_can_call_fault(vmf);
if (ret)
return ret;
ret = __do_fault(vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY)))
return ret;
ret |= finish_fault(vmf);
folio = page_folio(vmf->page);
folio_unlock(folio);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY)))
folio_put(folio);
return ret;
}
static vm_fault_t do_cow_fault(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
struct folio *folio;
vm_fault_t ret;
ret = vmf_can_call_fault(vmf);
if (!ret)
ret = vmf_anon_prepare(vmf);
if (ret)
return ret;
folio = folio_prealloc(vma->vm_mm, vma, vmf->address, false);
if (!folio)
return VM_FAULT_OOM;
vmf->cow_page = &folio->page;
ret = __do_fault(vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY)))
goto uncharge_out;
if (ret & VM_FAULT_DONE_COW)
return ret;
copy_user_highpage(vmf->cow_page, vmf->page, vmf->address, vma);
__folio_mark_uptodate(folio);
ret |= finish_fault(vmf);
unlock_page(vmf->page);
put_page(vmf->page);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY)))
goto uncharge_out;
return ret;
uncharge_out:
folio_put(folio);
return ret;
}
static vm_fault_t do_shared_fault(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
vm_fault_t ret, tmp;
struct folio *folio;
mm: preallocate page before lock_page() at filemap COW Currently we are keeping faulted page locked throughout whole __do_fault call (except for page_mkwrite code path) after calling file system's fault code. If we do early COW, we allocate a new page which has to be charged for a memcg (mem_cgroup_newpage_charge). This function, however, might block for unbounded amount of time if memcg oom killer is disabled or fork-bomb is running because the only way out of the OOM situation is either an external event or OOM-situation fix. In the end we are keeping the faulted page locked and blocking other processes from faulting it in which is not good at all because we are basically punishing potentially an unrelated process for OOM condition in a different group (I have seen stuck system because of ld-2.11.1.so being locked). We can do test easily. % cgcreate -g memory:A % cgset -r memory.limit_in_bytes=64M A % cgset -r memory.memsw.limit_in_bytes=64M A % cd kernel_dir; cgexec -g memory:A make -j Then, the whole system will live-locked until you kill 'make -j' by hands (or push reboot...) This is because some important page in a a shared library are locked. Considering again, the new page is not necessary to be allocated with lock_page() held. And usual page allocation may dive into long memory reclaim loop with holding lock_page() and can cause very long latency. There are 3 ways. 1. do allocation/charge before lock_page() Pros. - simple and can handle page allocation in the same manner. This will reduce holding time of lock_page() in general. Cons. - we do page allocation even if ->fault() returns error. 2. do charge after unlock_page(). Even if charge fails, it's just OOM. Pros. - no impact to non-memcg path. Cons. - implemenation requires special cares of LRU and we need to modify page_add_new_anon_rmap()... 3. do unlock->charge->lock again method. Pros. - no impact to non-memcg path. Cons. - This may kill LOCK_PAGE_RETRY optimization. We need to release lock and get it again... This patch moves "charge" and memory allocation for COW page before lock_page(). Then, we can avoid scanning LRU with holding a lock on a page and latency under lock_page() will be reduced. Then, above livelock disappears. [akpm@linux-foundation.org: fix code layout] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reported-by: Lutz Vieweg <lvml@5t9.de> Original-idea-by: Michal Hocko <mhocko@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 00:12:27 +00:00
ret = vmf_can_call_fault(vmf);
if (ret)
return ret;
mm: preallocate page before lock_page() at filemap COW Currently we are keeping faulted page locked throughout whole __do_fault call (except for page_mkwrite code path) after calling file system's fault code. If we do early COW, we allocate a new page which has to be charged for a memcg (mem_cgroup_newpage_charge). This function, however, might block for unbounded amount of time if memcg oom killer is disabled or fork-bomb is running because the only way out of the OOM situation is either an external event or OOM-situation fix. In the end we are keeping the faulted page locked and blocking other processes from faulting it in which is not good at all because we are basically punishing potentially an unrelated process for OOM condition in a different group (I have seen stuck system because of ld-2.11.1.so being locked). We can do test easily. % cgcreate -g memory:A % cgset -r memory.limit_in_bytes=64M A % cgset -r memory.memsw.limit_in_bytes=64M A % cd kernel_dir; cgexec -g memory:A make -j Then, the whole system will live-locked until you kill 'make -j' by hands (or push reboot...) This is because some important page in a a shared library are locked. Considering again, the new page is not necessary to be allocated with lock_page() held. And usual page allocation may dive into long memory reclaim loop with holding lock_page() and can cause very long latency. There are 3 ways. 1. do allocation/charge before lock_page() Pros. - simple and can handle page allocation in the same manner. This will reduce holding time of lock_page() in general. Cons. - we do page allocation even if ->fault() returns error. 2. do charge after unlock_page(). Even if charge fails, it's just OOM. Pros. - no impact to non-memcg path. Cons. - implemenation requires special cares of LRU and we need to modify page_add_new_anon_rmap()... 3. do unlock->charge->lock again method. Pros. - no impact to non-memcg path. Cons. - This may kill LOCK_PAGE_RETRY optimization. We need to release lock and get it again... This patch moves "charge" and memory allocation for COW page before lock_page(). Then, we can avoid scanning LRU with holding a lock on a page and latency under lock_page() will be reduced. Then, above livelock disappears. [akpm@linux-foundation.org: fix code layout] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reported-by: Lutz Vieweg <lvml@5t9.de> Original-idea-by: Michal Hocko <mhocko@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 00:12:27 +00:00
ret = __do_fault(vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY)))
return ret;
folio = page_folio(vmf->page);
/*
* Check if the backing address space wants to know that the page is
* about to become writable
*/
if (vma->vm_ops->page_mkwrite) {
folio_unlock(folio);
tmp = do_page_mkwrite(vmf, folio);
if (unlikely(!tmp ||
(tmp & (VM_FAULT_ERROR | VM_FAULT_NOPAGE)))) {
folio_put(folio);
return tmp;
}
}
ret |= finish_fault(vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE |
VM_FAULT_RETRY))) {
folio_unlock(folio);
folio_put(folio);
return ret;
}
mm: close page_mkwrite races Change page_mkwrite to allow implementations to return with the page locked, and also change it's callers (in page fault paths) to hold the lock until the page is marked dirty. This allows the filesystem to have full control of page dirtying events coming from the VM. Rather than simply hold the page locked over the page_mkwrite call, we call page_mkwrite with the page unlocked and allow callers to return with it locked, so filesystems can avoid LOR conditions with page lock. The problem with the current scheme is this: a filesystem that wants to associate some metadata with a page as long as the page is dirty, will perform this manipulation in its ->page_mkwrite. It currently then must return with the page unlocked and may not hold any other locks (according to existing page_mkwrite convention). In this window, the VM could write out the page, clearing page-dirty. The filesystem has no good way to detect that a dirty pte is about to be attached, so it will happily write out the page, at which point, the filesystem may manipulate the metadata to reflect that the page is no longer dirty. It is not always possible to perform the required metadata manipulation in ->set_page_dirty, because that function cannot block or fail. The filesystem may need to allocate some data structure, for example. And the VM cannot mark the pte dirty before page_mkwrite, because page_mkwrite is allowed to fail, so we must not allow any window where the page could be written to if page_mkwrite does fail. This solution of holding the page locked over the 3 critical operations (page_mkwrite, setting the pte dirty, and finally setting the page dirty) closes out races nicely, preventing page cleaning for writeout being initiated in that window. This provides the filesystem with a strong synchronisation against the VM here. - Sage needs this race closed for ceph filesystem. - Trond for NFS (http://bugzilla.kernel.org/show_bug.cgi?id=12913). - I need it for fsblock. - I suspect other filesystems may need it too (eg. btrfs). - I have converted buffer.c to the new locking. Even simple block allocation under dirty pages might be susceptible to i_size changing under partial page at the end of file (we also have a buffer.c-side problem here, but it cannot be fixed properly without this patch). - Other filesystems (eg. NFS, maybe btrfs) will need to change their page_mkwrite functions themselves. [ This also moves page_mkwrite another step closer to fault, which should eventually allow page_mkwrite to be moved into ->fault, and thus avoiding a filesystem calldown and page lock/unlock cycle in __do_fault. ] [akpm@linux-foundation.org: fix derefs of NULL ->mapping] Cc: Sage Weil <sage@newdream.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-30 22:08:16 +00:00
mm: drop mmap_sem before calling balance_dirty_pages() in write fault One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 01:50:22 +00:00
ret |= fault_dirty_shared_page(vmf);
mm: preallocate page before lock_page() at filemap COW Currently we are keeping faulted page locked throughout whole __do_fault call (except for page_mkwrite code path) after calling file system's fault code. If we do early COW, we allocate a new page which has to be charged for a memcg (mem_cgroup_newpage_charge). This function, however, might block for unbounded amount of time if memcg oom killer is disabled or fork-bomb is running because the only way out of the OOM situation is either an external event or OOM-situation fix. In the end we are keeping the faulted page locked and blocking other processes from faulting it in which is not good at all because we are basically punishing potentially an unrelated process for OOM condition in a different group (I have seen stuck system because of ld-2.11.1.so being locked). We can do test easily. % cgcreate -g memory:A % cgset -r memory.limit_in_bytes=64M A % cgset -r memory.memsw.limit_in_bytes=64M A % cd kernel_dir; cgexec -g memory:A make -j Then, the whole system will live-locked until you kill 'make -j' by hands (or push reboot...) This is because some important page in a a shared library are locked. Considering again, the new page is not necessary to be allocated with lock_page() held. And usual page allocation may dive into long memory reclaim loop with holding lock_page() and can cause very long latency. There are 3 ways. 1. do allocation/charge before lock_page() Pros. - simple and can handle page allocation in the same manner. This will reduce holding time of lock_page() in general. Cons. - we do page allocation even if ->fault() returns error. 2. do charge after unlock_page(). Even if charge fails, it's just OOM. Pros. - no impact to non-memcg path. Cons. - implemenation requires special cares of LRU and we need to modify page_add_new_anon_rmap()... 3. do unlock->charge->lock again method. Pros. - no impact to non-memcg path. Cons. - This may kill LOCK_PAGE_RETRY optimization. We need to release lock and get it again... This patch moves "charge" and memory allocation for COW page before lock_page(). Then, we can avoid scanning LRU with holding a lock on a page and latency under lock_page() will be reduced. Then, above livelock disappears. [akpm@linux-foundation.org: fix code layout] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reported-by: Lutz Vieweg <lvml@5t9.de> Original-idea-by: Michal Hocko <mhocko@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 00:12:27 +00:00
return ret;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:59 +00:00
}
mm: fix fault vs invalidate race for linear mappings Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:57 +00:00
/*
* We enter with non-exclusive mmap_lock (to exclude vma changes,
* but allow concurrent faults).
* The mmap_lock may have been released depending on flags and our
* return value. See filemap_fault() and __folio_lock_or_retry().
* If mmap_lock is released, vma may become invalid (for example
mm/memory.c: do_fault: avoid usage of stale vm_area_struct LTP testcase mtest06 [1] can trigger a crash on s390x running 5.0.0-rc8. This is a stress test, where one thread mmaps/writes/munmaps memory area and other thread is trying to read from it: CPU: 0 PID: 2611 Comm: mmap1 Not tainted 5.0.0-rc8+ #51 Hardware name: IBM 2964 N63 400 (z/VM 6.4.0) Krnl PSW : 0404e00180000000 00000000001ac8d8 (__lock_acquire+0x7/0x7a8) Call Trace: ([<0000000000000000>] (null)) [<00000000001adae4>] lock_acquire+0xec/0x258 [<000000000080d1ac>] _raw_spin_lock_bh+0x5c/0x98 [<000000000012a780>] page_table_free+0x48/0x1a8 [<00000000002f6e54>] do_fault+0xdc/0x670 [<00000000002fadae>] __handle_mm_fault+0x416/0x5f0 [<00000000002fb138>] handle_mm_fault+0x1b0/0x320 [<00000000001248cc>] do_dat_exception+0x19c/0x2c8 [<000000000080e5ee>] pgm_check_handler+0x19e/0x200 page_table_free() is called with NULL mm parameter, but because "0" is a valid address on s390 (see S390_lowcore), it keeps going until it eventually crashes in lockdep's lock_acquire. This crash is reproducible at least since 4.14. Problem is that "vmf->vma" used in do_fault() can become stale. Because mmap_sem may be released, other threads can come in, call munmap() and cause "vma" be returned to kmem cache, and get zeroed/re-initialized and re-used: handle_mm_fault | __handle_mm_fault | do_fault | vma = vmf->vma | do_read_fault | __do_fault | vma->vm_ops->fault(vmf); | mmap_sem is released | | | do_munmap() | remove_vma_list() | remove_vma() | vm_area_free() | # vma is released | ... | # same vma is allocated | # from kmem cache | do_mmap() | vm_area_alloc() | memset(vma, 0, ...) | pte_free(vma->vm_mm, ...); | page_table_free | spin_lock_bh(&mm->context.lock);| <crash> | Cache mm_struct to avoid using potentially stale "vma". [1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/mtest06/mmap1.c Link: http://lkml.kernel.org/r/5b3fdf19e2a5be460a384b936f5b56e13733f1b8.1551595137.git.jstancek@redhat.com Signed-off-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Acked-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:50:08 +00:00
* by other thread calling munmap()).
*/
static vm_fault_t do_fault(struct vm_fault *vmf)
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:59 +00:00
{
struct vm_area_struct *vma = vmf->vma;
mm/memory.c: do_fault: avoid usage of stale vm_area_struct LTP testcase mtest06 [1] can trigger a crash on s390x running 5.0.0-rc8. This is a stress test, where one thread mmaps/writes/munmaps memory area and other thread is trying to read from it: CPU: 0 PID: 2611 Comm: mmap1 Not tainted 5.0.0-rc8+ #51 Hardware name: IBM 2964 N63 400 (z/VM 6.4.0) Krnl PSW : 0404e00180000000 00000000001ac8d8 (__lock_acquire+0x7/0x7a8) Call Trace: ([<0000000000000000>] (null)) [<00000000001adae4>] lock_acquire+0xec/0x258 [<000000000080d1ac>] _raw_spin_lock_bh+0x5c/0x98 [<000000000012a780>] page_table_free+0x48/0x1a8 [<00000000002f6e54>] do_fault+0xdc/0x670 [<00000000002fadae>] __handle_mm_fault+0x416/0x5f0 [<00000000002fb138>] handle_mm_fault+0x1b0/0x320 [<00000000001248cc>] do_dat_exception+0x19c/0x2c8 [<000000000080e5ee>] pgm_check_handler+0x19e/0x200 page_table_free() is called with NULL mm parameter, but because "0" is a valid address on s390 (see S390_lowcore), it keeps going until it eventually crashes in lockdep's lock_acquire. This crash is reproducible at least since 4.14. Problem is that "vmf->vma" used in do_fault() can become stale. Because mmap_sem may be released, other threads can come in, call munmap() and cause "vma" be returned to kmem cache, and get zeroed/re-initialized and re-used: handle_mm_fault | __handle_mm_fault | do_fault | vma = vmf->vma | do_read_fault | __do_fault | vma->vm_ops->fault(vmf); | mmap_sem is released | | | do_munmap() | remove_vma_list() | remove_vma() | vm_area_free() | # vma is released | ... | # same vma is allocated | # from kmem cache | do_mmap() | vm_area_alloc() | memset(vma, 0, ...) | pte_free(vma->vm_mm, ...); | page_table_free | spin_lock_bh(&mm->context.lock);| <crash> | Cache mm_struct to avoid using potentially stale "vma". [1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/mtest06/mmap1.c Link: http://lkml.kernel.org/r/5b3fdf19e2a5be460a384b936f5b56e13733f1b8.1551595137.git.jstancek@redhat.com Signed-off-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Acked-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:50:08 +00:00
struct mm_struct *vm_mm = vma->vm_mm;
vm_fault_t ret;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:59 +00:00
/*
* The VMA was not fully populated on mmap() or missing VM_DONTEXPAND
*/
if (!vma->vm_ops->fault) {
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
vmf->pte = pte_offset_map_lock(vmf->vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
if (unlikely(!vmf->pte))
ret = VM_FAULT_SIGBUS;
else {
/*
* Make sure this is not a temporary clearing of pte
* by holding ptl and checking again. A R/M/W update
* of pte involves: take ptl, clearing the pte so that
* we don't have concurrent modification by hardware
* followed by an update.
*/
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (unlikely(pte_none(ptep_get(vmf->pte))))
ret = VM_FAULT_SIGBUS;
else
ret = VM_FAULT_NOPAGE;
pte_unmap_unlock(vmf->pte, vmf->ptl);
}
} else if (!(vmf->flags & FAULT_FLAG_WRITE))
mm: stop leaking PageTables 4.10-rc loadtest (even on x86, and even without THPCache) fails with "fork: Cannot allocate memory" or some such; and /proc/meminfo shows PageTables growing. Commit 953c66c2b22a ("mm: THP page cache support for ppc64") that got merged in rc1 removed the freeing of an unused preallocated pagetable after do_fault_around() has called map_pages(). This is usually a good optimization, so that the followup doesn't have to reallocate one; but it's not sufficient to shift the freeing into alloc_set_pte(), since there are failure cases (most commonly VM_FAULT_RETRY) which never reach finish_fault(). Check and free it at the outer level in do_fault(), then we don't need to worry in alloc_set_pte(), and can restore that to how it was (I cannot find any reason to pte_free() under lock as it was doing). And fix a separate pagetable leak, or crash, introduced by the same change, that could only show up on some ppc64: why does do_set_pmd()'s failure case attempt to withdraw a pagetable when it never deposited one, at the same time overwriting (so leaking) the vmf->prealloc_pte? Residue of an earlier implementation, perhaps? Delete it. Fixes: 953c66c2b22a ("mm: THP page cache support for ppc64") Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-07 23:37:31 +00:00
ret = do_read_fault(vmf);
else if (!(vma->vm_flags & VM_SHARED))
ret = do_cow_fault(vmf);
else
ret = do_shared_fault(vmf);
/* preallocated pagetable is unused: free it */
if (vmf->prealloc_pte) {
mm/memory.c: do_fault: avoid usage of stale vm_area_struct LTP testcase mtest06 [1] can trigger a crash on s390x running 5.0.0-rc8. This is a stress test, where one thread mmaps/writes/munmaps memory area and other thread is trying to read from it: CPU: 0 PID: 2611 Comm: mmap1 Not tainted 5.0.0-rc8+ #51 Hardware name: IBM 2964 N63 400 (z/VM 6.4.0) Krnl PSW : 0404e00180000000 00000000001ac8d8 (__lock_acquire+0x7/0x7a8) Call Trace: ([<0000000000000000>] (null)) [<00000000001adae4>] lock_acquire+0xec/0x258 [<000000000080d1ac>] _raw_spin_lock_bh+0x5c/0x98 [<000000000012a780>] page_table_free+0x48/0x1a8 [<00000000002f6e54>] do_fault+0xdc/0x670 [<00000000002fadae>] __handle_mm_fault+0x416/0x5f0 [<00000000002fb138>] handle_mm_fault+0x1b0/0x320 [<00000000001248cc>] do_dat_exception+0x19c/0x2c8 [<000000000080e5ee>] pgm_check_handler+0x19e/0x200 page_table_free() is called with NULL mm parameter, but because "0" is a valid address on s390 (see S390_lowcore), it keeps going until it eventually crashes in lockdep's lock_acquire. This crash is reproducible at least since 4.14. Problem is that "vmf->vma" used in do_fault() can become stale. Because mmap_sem may be released, other threads can come in, call munmap() and cause "vma" be returned to kmem cache, and get zeroed/re-initialized and re-used: handle_mm_fault | __handle_mm_fault | do_fault | vma = vmf->vma | do_read_fault | __do_fault | vma->vm_ops->fault(vmf); | mmap_sem is released | | | do_munmap() | remove_vma_list() | remove_vma() | vm_area_free() | # vma is released | ... | # same vma is allocated | # from kmem cache | do_mmap() | vm_area_alloc() | memset(vma, 0, ...) | pte_free(vma->vm_mm, ...); | page_table_free | spin_lock_bh(&mm->context.lock);| <crash> | Cache mm_struct to avoid using potentially stale "vma". [1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/mtest06/mmap1.c Link: http://lkml.kernel.org/r/5b3fdf19e2a5be460a384b936f5b56e13733f1b8.1551595137.git.jstancek@redhat.com Signed-off-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Acked-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:50:08 +00:00
pte_free(vm_mm, vmf->prealloc_pte);
vmf->prealloc_pte = NULL;
mm: stop leaking PageTables 4.10-rc loadtest (even on x86, and even without THPCache) fails with "fork: Cannot allocate memory" or some such; and /proc/meminfo shows PageTables growing. Commit 953c66c2b22a ("mm: THP page cache support for ppc64") that got merged in rc1 removed the freeing of an unused preallocated pagetable after do_fault_around() has called map_pages(). This is usually a good optimization, so that the followup doesn't have to reallocate one; but it's not sufficient to shift the freeing into alloc_set_pte(), since there are failure cases (most commonly VM_FAULT_RETRY) which never reach finish_fault(). Check and free it at the outer level in do_fault(), then we don't need to worry in alloc_set_pte(), and can restore that to how it was (I cannot find any reason to pte_free() under lock as it was doing). And fix a separate pagetable leak, or crash, introduced by the same change, that could only show up on some ppc64: why does do_set_pmd()'s failure case attempt to withdraw a pagetable when it never deposited one, at the same time overwriting (so leaking) the vmf->prealloc_pte? Residue of an earlier implementation, perhaps? Delete it. Fixes: 953c66c2b22a ("mm: THP page cache support for ppc64") Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-07 23:37:31 +00:00
}
return ret;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:46:59 +00:00
}
int numa_migrate_check(struct folio *folio, struct vm_fault *vmf,
unsigned long addr, int *flags,
bool writable, int *last_cpupid)
{
mm/mempolicy: use numa_node_id() instead of cpu_to_node() Patch series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy:, v4. This patchset is to optimize the cross-socket memory access with MPOL_PREFERRED_MANY policy. To test this patch we ran the following test on a 3 node system. Node 0 - 2GB - Tier 1 Node 1 - 11GB - Tier 1 Node 6 - 10GB - Tier 2 Below changes are made to memcached to set the memory policy, It select Node0 and Node1 as preferred nodes. #include <numaif.h> #include <numa.h> unsigned long nodemask; int ret; nodemask = 0x03; ret = set_mempolicy(MPOL_PREFERRED_MANY | MPOL_F_NUMA_BALANCING, &nodemask, 10); /* If MPOL_F_NUMA_BALANCING isn't supported, * fall back to MPOL_PREFERRED_MANY */ if (ret < 0 && errno == EINVAL){ printf("set mem policy normal\n"); ret = set_mempolicy(MPOL_PREFERRED_MANY, &nodemask, 10); } if (ret < 0) { perror("Failed to call set_mempolicy"); exit(-1); } Test Procedure: =============== 1. Make sure memory tiring and demotion are enabled. 2. Start memcached. # ./memcached -b 100000 -m 204800 -u root -c 1000000 -t 7 -d -s "/tmp/memcached.sock" 3. Run memtier_benchmark to store 3200000 keys. #./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary --threads=1 --pipeline=1 --ratio=1:0 --key-pattern=S:S --key-minimum=1 --key-maximum=3200000 -n allkeys -c 1 -R -x 1 -d 1024 4. Start a memory eater on node 0 and 1. This will demote all memcached pages to node 6. 5. Make sure all the memcached pages got demoted to lower tier by reading /proc/<memcaced PID>/numa_maps. # cat /proc/2771/numa_maps --- default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64 default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64 --- 6. Kill memory eater. 7. Read the pgpromote_success counter. 8. Start reading the keys by running memtier_benchmark. #./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary --pipeline=1 --distinct-client-seed --ratio=0:3 --key-pattern=R:R --key-minimum=1 --key-maximum=3200000 -n allkeys --threads=64 -c 1 -R -x 6 9. Read the pgpromote_success counter. Test Results: ============= Without Patch ------------------ 1. pgpromote_success before test Node 0: pgpromote_success 11 Node 1: pgpromote_success 140974 pgpromote_success after test Node 0: pgpromote_success 11 Node 1: pgpromote_success 140974 2. Memtier-benchmark result. AGGREGATED AVERAGE RESULTS (6 runs) ================================================================== Type Ops/sec Hits/sec Misses/sec Avg. Latency p50 Latency ------------------------------------------------------------------ Sets 0.00 --- --- --- --- Gets 305792.03 305791.93 0.10 0.18949 0.16700 Waits 0.00 --- --- --- --- Totals 305792.03 305791.93 0.10 0.18949 0.16700 ====================================== p99 Latency p99.9 Latency KB/sec ------------------------------------- --- --- 0.00 0.44700 1.71100 11542.69 --- --- --- 0.44700 1.71100 11542.69 With Patch --------------- 1. pgpromote_success before test Node 0: pgpromote_success 5 Node 1: pgpromote_success 89386 pgpromote_success after test Node 0: pgpromote_success 57895 Node 1: pgpromote_success 141463 2. Memtier-benchmark result. AGGREGATED AVERAGE RESULTS (6 runs) ==================================================================== Type Ops/sec Hits/sec Misses/sec Avg. Latency p50 Latency -------------------------------------------------------------------- Sets 0.00 --- --- --- --- Gets 521942.24 521942.07 0.17 0.11459 0.10300 Waits 0.00 --- --- --- --- Totals 521942.24 521942.07 0.17 0.11459 0.10300 ======================================= p99 Latency p99.9 Latency KB/sec --------------------------------------- --- --- 0.00 0.23100 0.31900 19701.68 --- --- --- 0.23100 0.31900 19701.68 Test Result Analysis: ===================== 1. With patch we could observe pages are getting promoted. 2. Memtier-benchmark results shows that, with the patch, performance has increased more than 50%. Ops/sec without fix - 305792.03 Ops/sec with fix - 521942.24 This patch (of 2): Instead of using 'cpu_to_node()', we use 'numa_node_id()', which is quicker. smp_processor_id is guaranteed to be stable in the 'mpol_misplaced()' function because it is called with ptl held. lockdep_assert_held was added to ensure that. No functional change in this patch. [donettom@linux.ibm.com: add "* @vmf: structure describing the fault" comment] Link: https://lkml.kernel.org/r/d8b993ea9dccfac0bc3ed61d3a81f4ac5f376e46.1711002865.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/cover.1711373653.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/6059f034f436734b472d066db69676fb3a459864.1711373653.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/cover.1709909210.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/744646531af02cc687cde8ae788fb1779e99d02c.1709909210.git.donettom@linux.ibm.com Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-08 15:15:37 +00:00
struct vm_area_struct *vma = vmf->vma;
/*
* Avoid grouping on RO pages in general. RO pages shouldn't hurt as
* much anyway since they can be in shared cache state. This misses
* the case where a mapping is writable but the process never writes
* to it but pte_write gets cleared during protection updates and
* pte_dirty has unpredictable behaviour between PTE scan updates,
* background writeback, dirty balancing and application behaviour.
*/
if (!writable)
*flags |= TNF_NO_GROUP;
/*
* Flag if the folio is shared between multiple address spaces. This
* is later used when determining whether to group tasks together
*/
if (folio_likely_mapped_shared(folio) && (vma->vm_flags & VM_SHARED))
*flags |= TNF_SHARED;
/*
* For memory tiering mode, cpupid of slow memory page is used
* to record page access time. So use default value.
*/
if (folio_use_access_time(folio))
*last_cpupid = (-1 & LAST_CPUPID_MASK);
else
*last_cpupid = folio_last_cpupid(folio);
/* Record the current PID acceesing VMA */
vma_set_access_pid_bit(vma);
count_vm_numa_event(NUMA_HINT_FAULTS);
mm,memcg: provide per-cgroup counters for NUMA balancing operations The ability to observe the demotion and promotion decisions made by the kernel on a per-cgroup basis is important for monitoring and tuning containerized workloads on machines equipped with tiered memory. Different containers in the system may experience drastically different memory tiering actions that cannot be distinguished from the global counters alone. For example, a container running a workload that has a much hotter memory accesses will likely see more promotions and fewer demotions, potentially depriving a colocated container of top tier memory to such an extent that its performance degrades unacceptably. For another example, some containers may exhibit longer periods between data reuse, causing much more numa_hint_faults than numa_pages_migrated. In this case, tuning hot_threshold_ms may be appropriate, but the signal can easily be lost if only global counters are available. In the long term, we hope to introduce per-cgroup control of promotion and demotion actions to implement memory placement policies in tiering. This patch set adds seven counters to memory.stat in a cgroup: numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd, pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_* and pgpromote_success are also available in memory.numa_stat. count_memcg_events_mm() is added to count multiple event occurrences at once, and get_mem_cgroup_from_folio() is added because we need to get a reference to the memcg of a folio before it's migrated to track numa_pages_migrated. The accounting of PGDEMOTE_* is moved to shrink_inactive_list() before being changed to per-cgroup. [kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst] Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Wei Xu <weixugc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-14 17:42:27 +00:00
#ifdef CONFIG_NUMA_BALANCING
count_memcg_folio_events(folio, NUMA_HINT_FAULTS, 1);
#endif
if (folio_nid(folio) == numa_node_id()) {
count_vm_numa_event(NUMA_HINT_FAULTS_LOCAL);
*flags |= TNF_FAULT_LOCAL;
}
mm/mempolicy: use numa_node_id() instead of cpu_to_node() Patch series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy:, v4. This patchset is to optimize the cross-socket memory access with MPOL_PREFERRED_MANY policy. To test this patch we ran the following test on a 3 node system. Node 0 - 2GB - Tier 1 Node 1 - 11GB - Tier 1 Node 6 - 10GB - Tier 2 Below changes are made to memcached to set the memory policy, It select Node0 and Node1 as preferred nodes. #include <numaif.h> #include <numa.h> unsigned long nodemask; int ret; nodemask = 0x03; ret = set_mempolicy(MPOL_PREFERRED_MANY | MPOL_F_NUMA_BALANCING, &nodemask, 10); /* If MPOL_F_NUMA_BALANCING isn't supported, * fall back to MPOL_PREFERRED_MANY */ if (ret < 0 && errno == EINVAL){ printf("set mem policy normal\n"); ret = set_mempolicy(MPOL_PREFERRED_MANY, &nodemask, 10); } if (ret < 0) { perror("Failed to call set_mempolicy"); exit(-1); } Test Procedure: =============== 1. Make sure memory tiring and demotion are enabled. 2. Start memcached. # ./memcached -b 100000 -m 204800 -u root -c 1000000 -t 7 -d -s "/tmp/memcached.sock" 3. Run memtier_benchmark to store 3200000 keys. #./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary --threads=1 --pipeline=1 --ratio=1:0 --key-pattern=S:S --key-minimum=1 --key-maximum=3200000 -n allkeys -c 1 -R -x 1 -d 1024 4. Start a memory eater on node 0 and 1. This will demote all memcached pages to node 6. 5. Make sure all the memcached pages got demoted to lower tier by reading /proc/<memcaced PID>/numa_maps. # cat /proc/2771/numa_maps --- default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64 default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64 --- 6. Kill memory eater. 7. Read the pgpromote_success counter. 8. Start reading the keys by running memtier_benchmark. #./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary --pipeline=1 --distinct-client-seed --ratio=0:3 --key-pattern=R:R --key-minimum=1 --key-maximum=3200000 -n allkeys --threads=64 -c 1 -R -x 6 9. Read the pgpromote_success counter. Test Results: ============= Without Patch ------------------ 1. pgpromote_success before test Node 0: pgpromote_success 11 Node 1: pgpromote_success 140974 pgpromote_success after test Node 0: pgpromote_success 11 Node 1: pgpromote_success 140974 2. Memtier-benchmark result. AGGREGATED AVERAGE RESULTS (6 runs) ================================================================== Type Ops/sec Hits/sec Misses/sec Avg. Latency p50 Latency ------------------------------------------------------------------ Sets 0.00 --- --- --- --- Gets 305792.03 305791.93 0.10 0.18949 0.16700 Waits 0.00 --- --- --- --- Totals 305792.03 305791.93 0.10 0.18949 0.16700 ====================================== p99 Latency p99.9 Latency KB/sec ------------------------------------- --- --- 0.00 0.44700 1.71100 11542.69 --- --- --- 0.44700 1.71100 11542.69 With Patch --------------- 1. pgpromote_success before test Node 0: pgpromote_success 5 Node 1: pgpromote_success 89386 pgpromote_success after test Node 0: pgpromote_success 57895 Node 1: pgpromote_success 141463 2. Memtier-benchmark result. AGGREGATED AVERAGE RESULTS (6 runs) ==================================================================== Type Ops/sec Hits/sec Misses/sec Avg. Latency p50 Latency -------------------------------------------------------------------- Sets 0.00 --- --- --- --- Gets 521942.24 521942.07 0.17 0.11459 0.10300 Waits 0.00 --- --- --- --- Totals 521942.24 521942.07 0.17 0.11459 0.10300 ======================================= p99 Latency p99.9 Latency KB/sec --------------------------------------- --- --- 0.00 0.23100 0.31900 19701.68 --- --- --- 0.23100 0.31900 19701.68 Test Result Analysis: ===================== 1. With patch we could observe pages are getting promoted. 2. Memtier-benchmark results shows that, with the patch, performance has increased more than 50%. Ops/sec without fix - 305792.03 Ops/sec with fix - 521942.24 This patch (of 2): Instead of using 'cpu_to_node()', we use 'numa_node_id()', which is quicker. smp_processor_id is guaranteed to be stable in the 'mpol_misplaced()' function because it is called with ptl held. lockdep_assert_held was added to ensure that. No functional change in this patch. [donettom@linux.ibm.com: add "* @vmf: structure describing the fault" comment] Link: https://lkml.kernel.org/r/d8b993ea9dccfac0bc3ed61d3a81f4ac5f376e46.1711002865.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/cover.1711373653.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/6059f034f436734b472d066db69676fb3a459864.1711373653.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/cover.1709909210.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/744646531af02cc687cde8ae788fb1779e99d02c.1709909210.git.donettom@linux.ibm.com Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-08 15:15:37 +00:00
return mpol_misplaced(folio, vmf, addr);
}
static void numa_rebuild_single_mapping(struct vm_fault *vmf, struct vm_area_struct *vma,
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
unsigned long fault_addr, pte_t *fault_pte,
bool writable)
{
pte_t pte, old_pte;
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
old_pte = ptep_modify_prot_start(vma, fault_addr, fault_pte);
pte = pte_modify(old_pte, vma->vm_page_prot);
pte = pte_mkyoung(pte);
if (writable)
pte = pte_mkwrite(pte, vma);
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
ptep_modify_prot_commit(vma, fault_addr, fault_pte, old_pte, pte);
update_mmu_cache_range(vmf, vma, fault_addr, fault_pte, 1);
}
static void numa_rebuild_large_mapping(struct vm_fault *vmf, struct vm_area_struct *vma,
struct folio *folio, pte_t fault_pte,
bool ignore_writable, bool pte_write_upgrade)
{
int nr = pte_pfn(fault_pte) - folio_pfn(folio);
mm: fix possible OOB in numa_rebuild_large_mapping() The large folio is mapped with folio size(not greater PMD_SIZE) aligned virtual address during the pagefault, ie, 'addr = ALIGN_DOWN(vmf->address, nr_pages * PAGE_SIZE)' in do_anonymous_page(). But after the mremap(), the virtual address only requires PAGE_SIZE alignment. Also pte is moved to new in move_page_tables(), then traversal of the new pte in the numa_rebuild_large_mapping() could hit the following issue, Unable to handle kernel paging request at virtual address 00000a80c021a788 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00002040341a6000 [00000a80c021a788] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP ... CPU: 76 PID: 15187 Comm: git Kdump: loaded Tainted: G W 6.10.0-rc2+ #209 Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 1.79 08/21/2021 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : numa_rebuild_large_mapping+0x338/0x638 lr : numa_rebuild_large_mapping+0x320/0x638 sp : ffff8000b41c3b00 x29: ffff8000b41c3b30 x28: ffff8000812a0000 x27: 00000000000a8000 x26: 00000000000000a8 x25: 0010000000000001 x24: ffff20401c7170f0 x23: 0000ffff33a1e000 x22: 0000ffff33a76000 x21: ffff20400869eca0 x20: 0000ffff33976000 x19: 00000000000000a8 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000020 x15: ffff8000b41c36a8 x14: 0000000000000000 x13: 205d373831353154 x12: 5b5d333331363732 x11: 000000000011ff78 x10: 000000000011ff10 x9 : ffff800080273f30 x8 : 000000320400869e x7 : c0000000ffffd87f x6 : 00000000001e6ba8 x5 : ffff206f3fb5af88 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : fffffdffc0000000 x0 : 00000a80c021a780 Call trace: numa_rebuild_large_mapping+0x338/0x638 do_numa_page+0x3e4/0x4e0 handle_pte_fault+0x1bc/0x238 __handle_mm_fault+0x20c/0x400 handle_mm_fault+0xa8/0x288 do_page_fault+0x124/0x498 do_translation_fault+0x54/0x80 do_mem_abort+0x4c/0xa8 el0_da+0x40/0x110 el0t_64_sync_handler+0xe4/0x158 el0t_64_sync+0x188/0x190 Fix it by making the start and end not only within the vma range, but also within the page table range. Link: https://lkml.kernel.org/r/20240612122822.4033433-1-wangkefeng.wang@huawei.com Fixes: d2136d749d76 ("mm: support multi-size THP numa balancing") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-12 12:28:22 +00:00
unsigned long start, end, addr = vmf->address;
unsigned long addr_start = addr - (nr << PAGE_SHIFT);
unsigned long pt_start = ALIGN_DOWN(addr, PMD_SIZE);
pte_t *start_ptep;
/* Stay within the VMA and within the page table. */
start = max3(addr_start, pt_start, vma->vm_start);
end = min3(addr_start + folio_size(folio), pt_start + PMD_SIZE,
vma->vm_end);
start_ptep = vmf->pte - ((addr - start) >> PAGE_SHIFT);
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
/* Restore all PTEs' mapping of the large folio */
for (addr = start; addr != end; start_ptep++, addr += PAGE_SIZE) {
pte_t ptent = ptep_get(start_ptep);
bool writable = false;
if (!pte_present(ptent) || !pte_protnone(ptent))
continue;
if (pfn_folio(pte_pfn(ptent)) != folio)
continue;
if (!ignore_writable) {
ptent = pte_modify(ptent, vma->vm_page_prot);
writable = pte_write(ptent);
if (!writable && pte_write_upgrade &&
can_change_pte_writable(vma, addr, ptent))
writable = true;
}
numa_rebuild_single_mapping(vmf, vma, addr, start_ptep, writable);
}
}
static vm_fault_t do_numa_page(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
struct folio *folio = NULL;
int nid = NUMA_NO_NODE;
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
bool writable = false, ignore_writable = false;
bool pte_write_upgrade = vma_wants_manual_pte_write_upgrade(vma);
int last_cpupid;
int target_nid;
pte_t pte, old_pte;
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
int flags = 0, nr_pages;
/*
* The pte cannot be used safely until we verify, while holding the page
* table lock, that its contents have not changed during fault handling.
*/
spin_lock(vmf->ptl);
/* Read the live PTE from the page tables: */
old_pte = ptep_get(vmf->pte);
if (unlikely(!pte_same(old_pte, vmf->orig_pte))) {
pte_unmap_unlock(vmf->pte, vmf->ptl);
return 0;
}
pte = pte_modify(old_pte, vma->vm_page_prot);
mm/autonuma: use can_change_(pte|pmd)_writable() to replace savedwrite commit b191f9b106ea ("mm: numa: preserve PTE write permissions across a NUMA hinting fault") added remembering write permissions using ordinary pte_write() for PROT_NONE mapped pages to avoid write faults when remapping the page !PROT_NONE on NUMA hinting faults. That commit noted: The patch looks hacky but the alternatives looked worse. The tidest was to rewalk the page tables after a hinting fault but it was more complex than this approach and the performance was worse. It's not generally safe to just mark the page writable during the fault if it's a write fault as it may have been read-only for COW so that approach was discarded. Later, commit 288bc54949fc ("mm/autonuma: let architecture override how the write bit should be stashed in a protnone pte.") introduced a family of savedwrite PTE functions that didn't necessarily improve the whole situation. One confusing thing is that nowadays, if a page is pte_protnone() and pte_savedwrite() then also pte_write() is true. Another source of confusion is that there is only a single pte_mk_savedwrite() call in the kernel. All other write-protection code seems to silently rely on pte_wrprotect(). Ever since PageAnonExclusive was introduced and we started using it in mprotect context via commit 64fe24a3e05e ("mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection"), we do have machinery in place to avoid write faults when changing protection, which is exactly what we want to do here. Let's similarly do what ordinary mprotect() does nowadays when upgrading write permissions and reuse can_change_pte_writable() and can_change_pmd_writable() to detect if we can upgrade PTE permissions to be writable. For anonymous pages there should be absolutely no change: if an anonymous page is not exclusive, it could not have been mapped writable -- because only exclusive anonymous pages can be mapped writable. However, there *might* be a change for writable shared mappings that require writenotify: if they are not dirty, we cannot map them writable. While it might not matter in practice, we'd need a different way to identify whether writenotify is actually required -- and ordinary mprotect would benefit from that as well. Note that we don't optimize for the actual migration case: (1) When migration succeeds the new PTE will not be writable because the source PTE was not writable (protnone); in the future we might just optimize that case similarly by reusing can_change_pte_writable()/can_change_pmd_writable() when removing migration PTEs. (2) When migration fails, we'd have to recalculate the "writable" flag because we temporarily dropped the PT lock; for now keep it simple and set "writable=false". We'll remove all savedwrite leftovers next. Link: https://lkml.kernel.org/r/20221108174652.198904-6-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:46:50 +00:00
/*
* Detect now whether the PTE could be writable; this information
* is only valid while holding the PT lock.
*/
writable = pte_write(pte);
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
if (!writable && pte_write_upgrade &&
mm/autonuma: use can_change_(pte|pmd)_writable() to replace savedwrite commit b191f9b106ea ("mm: numa: preserve PTE write permissions across a NUMA hinting fault") added remembering write permissions using ordinary pte_write() for PROT_NONE mapped pages to avoid write faults when remapping the page !PROT_NONE on NUMA hinting faults. That commit noted: The patch looks hacky but the alternatives looked worse. The tidest was to rewalk the page tables after a hinting fault but it was more complex than this approach and the performance was worse. It's not generally safe to just mark the page writable during the fault if it's a write fault as it may have been read-only for COW so that approach was discarded. Later, commit 288bc54949fc ("mm/autonuma: let architecture override how the write bit should be stashed in a protnone pte.") introduced a family of savedwrite PTE functions that didn't necessarily improve the whole situation. One confusing thing is that nowadays, if a page is pte_protnone() and pte_savedwrite() then also pte_write() is true. Another source of confusion is that there is only a single pte_mk_savedwrite() call in the kernel. All other write-protection code seems to silently rely on pte_wrprotect(). Ever since PageAnonExclusive was introduced and we started using it in mprotect context via commit 64fe24a3e05e ("mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection"), we do have machinery in place to avoid write faults when changing protection, which is exactly what we want to do here. Let's similarly do what ordinary mprotect() does nowadays when upgrading write permissions and reuse can_change_pte_writable() and can_change_pmd_writable() to detect if we can upgrade PTE permissions to be writable. For anonymous pages there should be absolutely no change: if an anonymous page is not exclusive, it could not have been mapped writable -- because only exclusive anonymous pages can be mapped writable. However, there *might* be a change for writable shared mappings that require writenotify: if they are not dirty, we cannot map them writable. While it might not matter in practice, we'd need a different way to identify whether writenotify is actually required -- and ordinary mprotect would benefit from that as well. Note that we don't optimize for the actual migration case: (1) When migration succeeds the new PTE will not be writable because the source PTE was not writable (protnone); in the future we might just optimize that case similarly by reusing can_change_pte_writable()/can_change_pmd_writable() when removing migration PTEs. (2) When migration fails, we'd have to recalculate the "writable" flag because we temporarily dropped the PT lock; for now keep it simple and set "writable=false". We'll remove all savedwrite leftovers next. Link: https://lkml.kernel.org/r/20221108174652.198904-6-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:46:50 +00:00
can_change_pte_writable(vma, vmf->address, pte))
writable = true;
folio = vm_normal_folio(vma, vmf->address, pte);
if (!folio || folio_is_zone_device(folio))
NUMA balancing: reduce TLB flush via delaying mapping on hint page fault With NUMA balancing, in hint page fault handler, the faulting page will be migrated to the accessing node if necessary. During the migration, TLB will be shot down on all CPUs that the process has run on recently. Because in the hint page fault handler, the PTE will be made accessible before the migration is tried. The overhead of TLB shooting down can be high, so it's better to be avoided if possible. In fact, if we delay mapping the page until migration, that can be avoided. This is what this patch doing. For the multiple threads applications, it's possible that a page is accessed by multiple threads almost at the same time. In the original implementation, because the first thread will install the accessible PTE before migrating the page, the other threads may access the page directly before the page is made inaccessible again during migration. While with the patch, the second thread will go through the page fault handler too. And because of the PageLRU() checking in the following code path, migrate_misplaced_page() numamigrate_isolate_page() isolate_lru_page() the migrate_misplaced_page() will return 0, and the PTE will be made accessible in the second thread. This will introduce a little more overhead. But we think the possibility for a page to be accessed by the multiple threads at the same time is low, and the overhead difference isn't too large. If this becomes a problem in some workloads, we need to consider how to reduce the overhead. To test the patch, we run a test case as follows on a 2-socket Intel server (1 NUMA node per socket) with 128GB DRAM (64GB per socket). 1. Run a memory eater on NUMA node 1 to use 40GB memory before running pmbench. 2. Run pmbench (normal accessing pattern) with 8 processes, and 8 threads per process, so there are 64 threads in total. The working-set size of each process is 8960MB, so the total working-set size is 8 * 8960MB = 70GB. The CPU of all pmbench processes is bound to node 1. The pmbench processes will access some DRAM on node 0. 3. After the pmbench processes run for 10 seconds, kill the memory eater. Now, some pages will be migrated from node 0 to node 1 via NUMA balancing. Test results show that, with the patch, the pmbench throughput (page accesses/s) increases 5.5%. The number of the TLB shootdowns interrupts reduces 98% (from ~4.7e7 to ~9.7e5) with about 9.2e6 pages (35.8GB) migrated. From the perf profile, it can be found that the CPU cycles spent by try_to_unmap() and its callees reduces from 6.02% to 0.47%. That is, the CPU cycles spent by TLB shooting down decreases greatly. Link: https://lkml.kernel.org/r/20210408132236.1175607-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Matthew Wilcox" <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Michel Lespinasse <walken@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 05:57:41 +00:00
goto out_map;
nid = folio_nid(folio);
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
nr_pages = folio_nr_pages(folio);
target_nid = numa_migrate_check(folio, vmf, vmf->address, &flags,
writable, &last_cpupid);
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
if (target_nid == NUMA_NO_NODE)
goto out_map;
if (migrate_misplaced_folio_prepare(folio, vma, target_nid)) {
flags |= TNF_MIGRATE_FAIL;
NUMA balancing: reduce TLB flush via delaying mapping on hint page fault With NUMA balancing, in hint page fault handler, the faulting page will be migrated to the accessing node if necessary. During the migration, TLB will be shot down on all CPUs that the process has run on recently. Because in the hint page fault handler, the PTE will be made accessible before the migration is tried. The overhead of TLB shooting down can be high, so it's better to be avoided if possible. In fact, if we delay mapping the page until migration, that can be avoided. This is what this patch doing. For the multiple threads applications, it's possible that a page is accessed by multiple threads almost at the same time. In the original implementation, because the first thread will install the accessible PTE before migrating the page, the other threads may access the page directly before the page is made inaccessible again during migration. While with the patch, the second thread will go through the page fault handler too. And because of the PageLRU() checking in the following code path, migrate_misplaced_page() numamigrate_isolate_page() isolate_lru_page() the migrate_misplaced_page() will return 0, and the PTE will be made accessible in the second thread. This will introduce a little more overhead. But we think the possibility for a page to be accessed by the multiple threads at the same time is low, and the overhead difference isn't too large. If this becomes a problem in some workloads, we need to consider how to reduce the overhead. To test the patch, we run a test case as follows on a 2-socket Intel server (1 NUMA node per socket) with 128GB DRAM (64GB per socket). 1. Run a memory eater on NUMA node 1 to use 40GB memory before running pmbench. 2. Run pmbench (normal accessing pattern) with 8 processes, and 8 threads per process, so there are 64 threads in total. The working-set size of each process is 8960MB, so the total working-set size is 8 * 8960MB = 70GB. The CPU of all pmbench processes is bound to node 1. The pmbench processes will access some DRAM on node 0. 3. After the pmbench processes run for 10 seconds, kill the memory eater. Now, some pages will be migrated from node 0 to node 1 via NUMA balancing. Test results show that, with the patch, the pmbench throughput (page accesses/s) increases 5.5%. The number of the TLB shootdowns interrupts reduces 98% (from ~4.7e7 to ~9.7e5) with about 9.2e6 pages (35.8GB) migrated. From the perf profile, it can be found that the CPU cycles spent by try_to_unmap() and its callees reduces from 6.02% to 0.47%. That is, the CPU cycles spent by TLB shooting down decreases greatly. Link: https://lkml.kernel.org/r/20210408132236.1175607-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Matthew Wilcox" <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Michel Lespinasse <walken@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 05:57:41 +00:00
goto out_map;
}
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
/* The folio is isolated and isolation code holds a folio reference. */
NUMA balancing: reduce TLB flush via delaying mapping on hint page fault With NUMA balancing, in hint page fault handler, the faulting page will be migrated to the accessing node if necessary. During the migration, TLB will be shot down on all CPUs that the process has run on recently. Because in the hint page fault handler, the PTE will be made accessible before the migration is tried. The overhead of TLB shooting down can be high, so it's better to be avoided if possible. In fact, if we delay mapping the page until migration, that can be avoided. This is what this patch doing. For the multiple threads applications, it's possible that a page is accessed by multiple threads almost at the same time. In the original implementation, because the first thread will install the accessible PTE before migrating the page, the other threads may access the page directly before the page is made inaccessible again during migration. While with the patch, the second thread will go through the page fault handler too. And because of the PageLRU() checking in the following code path, migrate_misplaced_page() numamigrate_isolate_page() isolate_lru_page() the migrate_misplaced_page() will return 0, and the PTE will be made accessible in the second thread. This will introduce a little more overhead. But we think the possibility for a page to be accessed by the multiple threads at the same time is low, and the overhead difference isn't too large. If this becomes a problem in some workloads, we need to consider how to reduce the overhead. To test the patch, we run a test case as follows on a 2-socket Intel server (1 NUMA node per socket) with 128GB DRAM (64GB per socket). 1. Run a memory eater on NUMA node 1 to use 40GB memory before running pmbench. 2. Run pmbench (normal accessing pattern) with 8 processes, and 8 threads per process, so there are 64 threads in total. The working-set size of each process is 8960MB, so the total working-set size is 8 * 8960MB = 70GB. The CPU of all pmbench processes is bound to node 1. The pmbench processes will access some DRAM on node 0. 3. After the pmbench processes run for 10 seconds, kill the memory eater. Now, some pages will be migrated from node 0 to node 1 via NUMA balancing. Test results show that, with the patch, the pmbench throughput (page accesses/s) increases 5.5%. The number of the TLB shootdowns interrupts reduces 98% (from ~4.7e7 to ~9.7e5) with about 9.2e6 pages (35.8GB) migrated. From the perf profile, it can be found that the CPU cycles spent by try_to_unmap() and its callees reduces from 6.02% to 0.47%. That is, the CPU cycles spent by TLB shooting down decreases greatly. Link: https://lkml.kernel.org/r/20210408132236.1175607-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Matthew Wilcox" <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Michel Lespinasse <walken@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 05:57:41 +00:00
pte_unmap_unlock(vmf->pte, vmf->ptl);
mm/autonuma: use can_change_(pte|pmd)_writable() to replace savedwrite commit b191f9b106ea ("mm: numa: preserve PTE write permissions across a NUMA hinting fault") added remembering write permissions using ordinary pte_write() for PROT_NONE mapped pages to avoid write faults when remapping the page !PROT_NONE on NUMA hinting faults. That commit noted: The patch looks hacky but the alternatives looked worse. The tidest was to rewalk the page tables after a hinting fault but it was more complex than this approach and the performance was worse. It's not generally safe to just mark the page writable during the fault if it's a write fault as it may have been read-only for COW so that approach was discarded. Later, commit 288bc54949fc ("mm/autonuma: let architecture override how the write bit should be stashed in a protnone pte.") introduced a family of savedwrite PTE functions that didn't necessarily improve the whole situation. One confusing thing is that nowadays, if a page is pte_protnone() and pte_savedwrite() then also pte_write() is true. Another source of confusion is that there is only a single pte_mk_savedwrite() call in the kernel. All other write-protection code seems to silently rely on pte_wrprotect(). Ever since PageAnonExclusive was introduced and we started using it in mprotect context via commit 64fe24a3e05e ("mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection"), we do have machinery in place to avoid write faults when changing protection, which is exactly what we want to do here. Let's similarly do what ordinary mprotect() does nowadays when upgrading write permissions and reuse can_change_pte_writable() and can_change_pmd_writable() to detect if we can upgrade PTE permissions to be writable. For anonymous pages there should be absolutely no change: if an anonymous page is not exclusive, it could not have been mapped writable -- because only exclusive anonymous pages can be mapped writable. However, there *might* be a change for writable shared mappings that require writenotify: if they are not dirty, we cannot map them writable. While it might not matter in practice, we'd need a different way to identify whether writenotify is actually required -- and ordinary mprotect would benefit from that as well. Note that we don't optimize for the actual migration case: (1) When migration succeeds the new PTE will not be writable because the source PTE was not writable (protnone); in the future we might just optimize that case similarly by reusing can_change_pte_writable()/can_change_pmd_writable() when removing migration PTEs. (2) When migration fails, we'd have to recalculate the "writable" flag because we temporarily dropped the PT lock; for now keep it simple and set "writable=false". We'll remove all savedwrite leftovers next. Link: https://lkml.kernel.org/r/20221108174652.198904-6-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:46:50 +00:00
writable = false;
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
ignore_writable = true;
/* Migrate to the requested node */
if (!migrate_misplaced_folio(folio, vma, target_nid)) {
nid = target_nid;
flags |= TNF_MIGRATED;
task_numa_fault(last_cpupid, nid, nr_pages, flags);
return 0;
NUMA balancing: reduce TLB flush via delaying mapping on hint page fault With NUMA balancing, in hint page fault handler, the faulting page will be migrated to the accessing node if necessary. During the migration, TLB will be shot down on all CPUs that the process has run on recently. Because in the hint page fault handler, the PTE will be made accessible before the migration is tried. The overhead of TLB shooting down can be high, so it's better to be avoided if possible. In fact, if we delay mapping the page until migration, that can be avoided. This is what this patch doing. For the multiple threads applications, it's possible that a page is accessed by multiple threads almost at the same time. In the original implementation, because the first thread will install the accessible PTE before migrating the page, the other threads may access the page directly before the page is made inaccessible again during migration. While with the patch, the second thread will go through the page fault handler too. And because of the PageLRU() checking in the following code path, migrate_misplaced_page() numamigrate_isolate_page() isolate_lru_page() the migrate_misplaced_page() will return 0, and the PTE will be made accessible in the second thread. This will introduce a little more overhead. But we think the possibility for a page to be accessed by the multiple threads at the same time is low, and the overhead difference isn't too large. If this becomes a problem in some workloads, we need to consider how to reduce the overhead. To test the patch, we run a test case as follows on a 2-socket Intel server (1 NUMA node per socket) with 128GB DRAM (64GB per socket). 1. Run a memory eater on NUMA node 1 to use 40GB memory before running pmbench. 2. Run pmbench (normal accessing pattern) with 8 processes, and 8 threads per process, so there are 64 threads in total. The working-set size of each process is 8960MB, so the total working-set size is 8 * 8960MB = 70GB. The CPU of all pmbench processes is bound to node 1. The pmbench processes will access some DRAM on node 0. 3. After the pmbench processes run for 10 seconds, kill the memory eater. Now, some pages will be migrated from node 0 to node 1 via NUMA balancing. Test results show that, with the patch, the pmbench throughput (page accesses/s) increases 5.5%. The number of the TLB shootdowns interrupts reduces 98% (from ~4.7e7 to ~9.7e5) with about 9.2e6 pages (35.8GB) migrated. From the perf profile, it can be found that the CPU cycles spent by try_to_unmap() and its callees reduces from 6.02% to 0.47%. That is, the CPU cycles spent by TLB shooting down decreases greatly. Link: https://lkml.kernel.org/r/20210408132236.1175607-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Matthew Wilcox" <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Michel Lespinasse <walken@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 05:57:41 +00:00
}
flags |= TNF_MIGRATE_FAIL;
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
if (unlikely(!vmf->pte))
return 0;
if (unlikely(!pte_same(ptep_get(vmf->pte), vmf->orig_pte))) {
pte_unmap_unlock(vmf->pte, vmf->ptl);
return 0;
}
NUMA balancing: reduce TLB flush via delaying mapping on hint page fault With NUMA balancing, in hint page fault handler, the faulting page will be migrated to the accessing node if necessary. During the migration, TLB will be shot down on all CPUs that the process has run on recently. Because in the hint page fault handler, the PTE will be made accessible before the migration is tried. The overhead of TLB shooting down can be high, so it's better to be avoided if possible. In fact, if we delay mapping the page until migration, that can be avoided. This is what this patch doing. For the multiple threads applications, it's possible that a page is accessed by multiple threads almost at the same time. In the original implementation, because the first thread will install the accessible PTE before migrating the page, the other threads may access the page directly before the page is made inaccessible again during migration. While with the patch, the second thread will go through the page fault handler too. And because of the PageLRU() checking in the following code path, migrate_misplaced_page() numamigrate_isolate_page() isolate_lru_page() the migrate_misplaced_page() will return 0, and the PTE will be made accessible in the second thread. This will introduce a little more overhead. But we think the possibility for a page to be accessed by the multiple threads at the same time is low, and the overhead difference isn't too large. If this becomes a problem in some workloads, we need to consider how to reduce the overhead. To test the patch, we run a test case as follows on a 2-socket Intel server (1 NUMA node per socket) with 128GB DRAM (64GB per socket). 1. Run a memory eater on NUMA node 1 to use 40GB memory before running pmbench. 2. Run pmbench (normal accessing pattern) with 8 processes, and 8 threads per process, so there are 64 threads in total. The working-set size of each process is 8960MB, so the total working-set size is 8 * 8960MB = 70GB. The CPU of all pmbench processes is bound to node 1. The pmbench processes will access some DRAM on node 0. 3. After the pmbench processes run for 10 seconds, kill the memory eater. Now, some pages will be migrated from node 0 to node 1 via NUMA balancing. Test results show that, with the patch, the pmbench throughput (page accesses/s) increases 5.5%. The number of the TLB shootdowns interrupts reduces 98% (from ~4.7e7 to ~9.7e5) with about 9.2e6 pages (35.8GB) migrated. From the perf profile, it can be found that the CPU cycles spent by try_to_unmap() and its callees reduces from 6.02% to 0.47%. That is, the CPU cycles spent by TLB shooting down decreases greatly. Link: https://lkml.kernel.org/r/20210408132236.1175607-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Matthew Wilcox" <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Michel Lespinasse <walken@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 05:57:41 +00:00
out_map:
/*
* Make it present again, depending on how arch implements
* non-accessible ptes, some can allow access by kernel mode.
*/
mm: support multi-size THP numa balancing Now the anonymous page allocation already supports multi-size THP (mTHP), but the numa balancing still prohibits mTHP migration even though it is an exclusive mapping, which is unreasonable. Allow scanning mTHP: Commit 859d4adc3415 ("mm: numa: do not trap faults on shared data section pages") skips shared CoW pages' NUMA page migration to avoid shared data segment migration. In addition, commit 80d47f5de5e3 ("mm: don't try to NUMA-migrate COW pages that have other uses") change to use page_count() to avoid GUP pages migration, that will also skip the mTHP numa scanning. Theoretically, we can use folio_maybe_dma_pinned() to detect the GUP issue, although there is still a GUP race, the issue seems to have been resolved by commit 80d47f5de5e3. Meanwhile, use the folio_likely_mapped_shared() to skip shared CoW pages though this is not a precise sharers count. To check if the folio is shared, ideally we want to make sure every page is mapped to the same process, but doing that seems expensive and using the estimated mapcount seems can work when running autonuma benchmark. Allow migrating mTHP: As mentioned in the previous thread[1], large folios (including THP) are more susceptible to false sharing issues among threads than 4K base page, leading to pages ping-pong back and forth during numa balancing, which is currently not easy to resolve. Therefore, as a start to support mTHP numa balancing, we can follow the PMD mapped THP's strategy, that means we can reuse the 2-stage filter in should_numa_migrate_memory() to check if the mTHP is being heavily contended among threads (through checking the CPU id and pid of the last access) to avoid false sharing at some degree. Thus, we can restore all PTE maps upon the first hint page fault of a large folio to follow the PMD mapped THP's strategy. In the future, we can continue to optimize the NUMA balancing algorithm to avoid the false sharing issue with large folios as much as possible. Performance data: Machine environment: 2 nodes, 128 cores Intel(R) Xeon(R) Platinum Base: 2024-03-25 mm-unstable branch Enable mTHP to run autonuma-benchmark mTHP:16K Base Patched numa01 numa01 224.70 143.48 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 118.05 47.43 numa02 numa02 13.45 9.29 numa02_SMT numa02_SMT 14.80 7.50 mTHP:64K Base Patched numa01 numa01 216.15 114.40 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 115.35 47.41 numa02 numa02 13.24 9.25 numa02_SMT numa02_SMT 14.67 7.34 mTHP:128K Base Patched numa01 numa01 205.13 144.45 numa01_THREAD_ALLOC numa01_THREAD_ALLOC 112.93 41.88 numa02 numa02 13.16 9.18 numa02_SMT numa02_SMT 14.81 7.49 [1] https://lore.kernel.org/all/20231117100745.fnpijbk4xgmals3k@techsingularity.net/ [baolin.wang@linux.alibaba.com: v3] Link: https://lkml.kernel.org/r/c33a5c0b0a0323b1f8ed53772f50501f4b196e25.1712132950.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/d28d276d599c26df7f38c9de8446f60e22dd1950.1711683069.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-29 06:56:46 +00:00
if (folio && folio_test_large(folio))
numa_rebuild_large_mapping(vmf, vma, folio, pte, ignore_writable,
pte_write_upgrade);
else
numa_rebuild_single_mapping(vmf, vma, vmf->address, vmf->pte,
writable);
NUMA balancing: reduce TLB flush via delaying mapping on hint page fault With NUMA balancing, in hint page fault handler, the faulting page will be migrated to the accessing node if necessary. During the migration, TLB will be shot down on all CPUs that the process has run on recently. Because in the hint page fault handler, the PTE will be made accessible before the migration is tried. The overhead of TLB shooting down can be high, so it's better to be avoided if possible. In fact, if we delay mapping the page until migration, that can be avoided. This is what this patch doing. For the multiple threads applications, it's possible that a page is accessed by multiple threads almost at the same time. In the original implementation, because the first thread will install the accessible PTE before migrating the page, the other threads may access the page directly before the page is made inaccessible again during migration. While with the patch, the second thread will go through the page fault handler too. And because of the PageLRU() checking in the following code path, migrate_misplaced_page() numamigrate_isolate_page() isolate_lru_page() the migrate_misplaced_page() will return 0, and the PTE will be made accessible in the second thread. This will introduce a little more overhead. But we think the possibility for a page to be accessed by the multiple threads at the same time is low, and the overhead difference isn't too large. If this becomes a problem in some workloads, we need to consider how to reduce the overhead. To test the patch, we run a test case as follows on a 2-socket Intel server (1 NUMA node per socket) with 128GB DRAM (64GB per socket). 1. Run a memory eater on NUMA node 1 to use 40GB memory before running pmbench. 2. Run pmbench (normal accessing pattern) with 8 processes, and 8 threads per process, so there are 64 threads in total. The working-set size of each process is 8960MB, so the total working-set size is 8 * 8960MB = 70GB. The CPU of all pmbench processes is bound to node 1. The pmbench processes will access some DRAM on node 0. 3. After the pmbench processes run for 10 seconds, kill the memory eater. Now, some pages will be migrated from node 0 to node 1 via NUMA balancing. Test results show that, with the patch, the pmbench throughput (page accesses/s) increases 5.5%. The number of the TLB shootdowns interrupts reduces 98% (from ~4.7e7 to ~9.7e5) with about 9.2e6 pages (35.8GB) migrated. From the perf profile, it can be found that the CPU cycles spent by try_to_unmap() and its callees reduces from 6.02% to 0.47%. That is, the CPU cycles spent by TLB shooting down decreases greatly. Link: https://lkml.kernel.org/r/20210408132236.1175607-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Matthew Wilcox" <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Michel Lespinasse <walken@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 05:57:41 +00:00
pte_unmap_unlock(vmf->pte, vmf->ptl);
if (nid != NUMA_NO_NODE)
task_numa_fault(last_cpupid, nid, nr_pages, flags);
return 0;
}
static inline vm_fault_t create_huge_pmd(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
if (vma_is_anonymous(vma))
return do_huge_pmd_anonymous_page(vmf);
if (vma->vm_ops->huge_fault)
return vma->vm_ops->huge_fault(vmf, PMD_ORDER);
return VM_FAULT_FALLBACK;
}
/* `inline' is required to avoid gcc 4.1.2 build error */
mm: memory: add orig_pmd to struct vm_fault Pach series "mm: thp: use generic THP migration for NUMA hinting fault", v3. When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. It is definitely a maintenance burden to keep two THP migration implementation for different code paths and it is more error prone. Using the generic THP migration implementation allows us remove the duplicate code and some hacks needed by the old ad hoc implementation. A quick grep shows x86_64, PowerPC (book3s), ARM64 ans S390 support both THP and NUMA balancing. The most of them support THP migration except for S390. Zi Yan tried to add THP migration support for S390 before but it was not accepted due to the design of S390 PMD. For the discussion, please see: https://lkml.org/lkml/2018/4/27/953. Per the discussion with Gerald Schaefer in v1 it is acceptible to skip huge PMD for S390 for now. I saw there were some hacks about gup from git history, but I didn't figure out if they have been removed or not since I just found FOLL_NUMA code in the current gup implementation and they seems useful. Patch #1 ~ #2 are preparation patches. Patch #3 is the real meat. Patch #4 ~ #6 keep consistent counters and behaviors with before. Patch #7 skips change huge PMD to prot_none if thp migration is not supported. Test ---- Did some tests to measure the latency of do_huge_pmd_numa_page. The test VM has 80 vcpus and 64G memory. The test would create 2 processes to consume 128G memory together which would incur memory pressure to cause THP splits. And it also creates 80 processes to hog cpu, and the memory consumer processes are bound to different nodes periodically in order to increase NUMA faults. The below test script is used: echo 3 > /proc/sys/vm/drop_caches # Run stress-ng for 24 hours ./stress-ng/stress-ng --vm 2 --vm-bytes 64G --timeout 24h & PID=$! ./stress-ng/stress-ng --cpu $NR_CPUS --timeout 24h & # Wait for vm stressors forked sleep 5 PID_1=`pgrep -P $PID | awk 'NR == 1'` PID_2=`pgrep -P $PID | awk 'NR == 2'` JOB1=`pgrep -P $PID_1` JOB2=`pgrep -P $PID_2` # Bind load jobs to different nodes periodically to force generate # cross node memory access while [ -d "/proc/$PID" ] do taskset -apc 8 $JOB1 taskset -apc 8 $JOB2 sleep 300 taskset -apc 58 $JOB1 taskset -apc 58 $JOB2 sleep 300 done With the above test the histogram of latency of do_huge_pmd_numa_page is as shown below. Since the number of do_huge_pmd_numa_page varies drastically for each run (should be due to scheduler), so I converted the raw number to percentage. patched base @us[stress-ng]: [0] 3.57% 0.16% [1] 55.68% 18.36% [2, 4) 10.46% 40.44% [4, 8) 7.26% 17.82% [8, 16) 21.12% 13.41% [16, 32) 1.06% 4.27% [32, 64) 0.56% 4.07% [64, 128) 0.16% 0.35% [128, 256) < 0.1% < 0.1% [256, 512) < 0.1% < 0.1% [512, 1K) < 0.1% < 0.1% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) < 0.1% < 0.1% [16K, 32K) < 0.1% < 0.1% [32K, 64K) < 0.1% < 0.1% Per the result, patched kernel is even slightly better than the base kernel. I think this is because the lock contention against THP split is less than base kernel due to the refactor. To exclude the affect from THP split, I also did test w/o memory pressure. No obvious regression is spotted. The below is the test result *w/o* memory pressure. patched base @us[stress-ng]: [0] 7.97% 18.4% [1] 69.63% 58.24% [2, 4) 4.18% 2.63% [4, 8) 0.22% 0.17% [8, 16) 1.03% 0.92% [16, 32) 0.14% < 0.1% [32, 64) < 0.1% < 0.1% [64, 128) < 0.1% < 0.1% [128, 256) < 0.1% < 0.1% [256, 512) 0.45% 1.19% [512, 1K) 15.45% 17.27% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) 0.86% 0.88% [16K, 32K) < 0.1% 0.15% [32K, 64K) < 0.1% < 0.1% [64K, 128K) < 0.1% < 0.1% [128K, 256K) < 0.1% < 0.1% The series also survived a series of tests that exercise NUMA balancing migrations by Mel. This patch (of 7): Add orig_pmd to struct vm_fault so the "orig_pmd" parameter used by huge page fault could be removed, just like its PTE counterpart does. Link: https://lkml.kernel.org/r/20210518200801.7413-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20210518200801.7413-2-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:51:35 +00:00
static inline vm_fault_t wp_huge_pmd(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
const bool unshare = vmf->flags & FAULT_FLAG_UNSHARE;
vm_fault_t ret;
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
if (vma_is_anonymous(vma)) {
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
if (likely(!unshare) &&
userfaultfd: UFFD_FEATURE_WP_ASYNC Patch series "Implement IOCTL to get and optionally clear info about PTEs", v33. *Motivation* The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch() retrieves the addresses of the pages that are written to in a region of virtual memory. This syscall is used in Windows applications and games etc. This syscall is being emulated in pretty slow manner in userspace. Our purpose is to enhance the kernel such that we translate it efficiently in a better way. Currently some out of tree hack patches are being used to efficiently emulate it in some kernels. We intend to replace those with these patches. So the whole gaming on Linux can effectively get benefit from this. It means there would be tons of users of this code. CRIU use case [2] was mentioned by Andrei and Danylo: > Use cases for migrating sparse VMAs are binaries sanitized with ASAN, > MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of > shadow memory [4]. Being able to migrate such binaries allows to highly > reduce the amount of work needed to identify and fix post-migration > crashes, which happen constantly. Andrei defines the following uses of this code: * it is more granular and allows us to track changed pages more effectively. The current interface can clear dirty bits for the entire process only. In addition, reading info about pages is a separate operation. It means we must freeze the process to read information about all its pages, reset dirty bits, only then we can start dumping pages. The information about pages becomes more and more outdated, while we are processing pages. The new interface solves both these downsides. First, it allows us to read pte bits and clear the soft-dirty bit atomically. It means that CRIU will not need to freeze processes to pre-dump their memory. Second, it clears soft-dirty bits for a specified region of memory. It means CRIU will have actual info about pages to the moment of dumping them. * The new interface has to be much faster because basic page filtering is happening in the kernel. With the old interface, we have to read pagemap for each page. *Implementation Evolution (Short Summary)* From the definition of GetWriteWatch(), we feel like kernel's soft-dirty feature can be used under the hood with some additions like: * reset soft-dirty flag for only a specific region of memory instead of clearing the flag for the entire process * get and clear soft-dirty flag for a specific region atomically So we decided to use ioctl on pagemap file to read or/and reset soft-dirty flag. But using soft-dirty flag, sometimes we get extra pages which weren't even written. They had become soft-dirty because of VMA merging and VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were able to by-pass this short coming by ignoring VM_SOFTDIRTY until David reported that mprotect etc messes up the soft-dirty flag while ignoring VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We discussed if we can revert these patches. But we could not reach to any conclusion. So at this point, I made couple of tries to solve this whole VM_SOFTDIRTY issue by correcting the soft-dirty implementation: * [7] Correct the bug fixed wrongly back in 2014. It had potential to cause regression. We left it behind. * [8] Keep a list of soft-dirty part of a VMA across splits and merges. I got the reply don't increase the size of the VMA by 8 bytes. At this point, we left soft-dirty considering it is too much delicate and userfaultfd [9] seemed like the only way forward. From there onward, we have been basing soft-dirty emulation on userfaultfd wp feature where kernel resolves the faults itself when WP_ASYNC feature is used. It was straight forward to add WP_ASYNC feature in userfautlfd. Now we get only those pages dirty or written-to which are really written in reality. (PS There is another WP_UNPOPULATED userfautfd feature is required which is needed to avoid pre-faulting memory before write-protecting [9].) All the different masks were added on the request of CRIU devs to create interface more generic and better. [1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch [2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com [3] https://github.com/google/sanitizers [4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit [5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com [6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/ [7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com [8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com [9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com [10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com This patch (of 6): Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows userfaultfd wr-protect faults to be resolved by the kernel directly. It can be used like a high accuracy version of soft-dirty, without vma modifications during tracking, and also with ranged support by default rather than for a whole mm when reset the protections due to existence of ioctl(UFFDIO_WRITEPROTECT). Several goals of such a dirty tracking interface: 1. All types of memory should be supported and tracable. This is nature for soft-dirty but should mention when the context is userfaultfd, because it used to only support anon/shmem/hugetlb. The problem is for a dirty tracking purpose these three types may not be enough, and it's legal to track anything e.g. any page cache writes from mmap. 2. Protections can be applied to partial of a memory range, without vma split/merge fuss. The hope is that the tracking itself should not affect any vma layout change. It also helps when reset happens because the reset will not need mmap write lock which can block the tracee. 3. Accuracy needs to be maintained. This means we need pte markers to work on any type of VMA. One could question that, the whole concept of async dirty tracking is not really close to fundamentally what userfaultfd used to be: it's not "a fault to be serviced by userspace" anymore. However, using userfaultfd-wp here as a framework is convenient for us in at least: 1. VM_UFFD_WP vma flag, which has a very good name to suite something like this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new feature bit to identify from a sync version of uffd-wp registration. 2. PTE markers logic can be leveraged across the whole kernel to maintain the uffd-wp bit as long as an arch supports, this also applies to this case where uffd-wp bit will be a hint to dirty information and it will not go lost easily (e.g. when some page cache ptes got zapped). 3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or resetting a range of memory, while there's no counterpart in the old soft-dirty world, hence if this is wanted in a new design we'll need a new interface otherwise. We can somehow understand that commonality because uffd-wp was fundamentally a similar idea of write-protecting pages just like soft-dirty. This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also gives us chance to modify impl of WP_ASYNC just in case it could be not depending on WP_UNPOPULATED anymore in the future kernels. It's also fine to imply that because both features will rely on PTE_MARKER_UFFD_WP config option, so they'll show up together (or both missing) in an UFFDIO_API probe. vma_can_userfault() now allows any VMA if the userfaultfd registration is only about async uffd-wp. So we can track dirty for all kinds of memory including generic file systems (like XFS, EXT4 or BTRFS). One trick worth mention in do_wp_page() is that we need to manually update vmf->orig_pte here because it can be used later with a pte_same() check - this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags. The major defect of this approach of dirty tracking is we need to populate the pgtables when tracking starts. Soft-dirty doesn't do it like that. It's unwanted in the case where the range of memory to track is huge and unpopulated (e.g., tracking updates on a 10G file with mmap() on top, without having any page cache installed yet). One way to improve this is to allow pte markers exist for larger than PTE level for PMD+. That will not change the interface if to implemented, so we can leave that for later. Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com Signed-off-by: Peter Xu <peterx@redhat.com> Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrei Vagin <avagin@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Miroslaw <emmir@google.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Paul Gofman <pgofman@codeweavers.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yun Zhou <yun.zhou@windriver.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
userfaultfd_huge_pmd_wp(vma, vmf->orig_pmd)) {
if (userfaultfd_wp_async(vmf->vma))
goto split;
userfaultfd: wp: hook userfault handler to write protection fault There are several cases write protection fault happens. It could be a write to zero page, swaped page or userfault write protected page. When the fault happens, there is no way to know if userfault write protect the page before. Here we just blindly issue a userfault notification for vma with VM_UFFD_WP regardless if app write protects it yet. Application should be ready to handle such wp fault. In the swapin case, always swapin as readonly. This will cause false positive userfaults. We need to decide later if to eliminate them with a flag like soft-dirty in the swap entry (see _PAGE_SWP_SOFT_DIRTY). hugetlbfs wouldn't need to worry about swapouts but and tmpfs would be handled by a swap entry bit like anonymous memory. The main problem with no easy solution to eliminate the false positives, will be if/when userfaultfd is extended to real filesystem pagecache. When the pagecache is freed by reclaim we can't leave the radix tree pinned if the inode and in turn the radix tree is reclaimed as well. The estimation is that full accuracy and lack of false positives could be easily provided only to anonymous memory (as long as there's no fork or as long as MADV_DONTFORK is used on the userfaultfd anonymous range) tmpfs and hugetlbfs, it's most certainly worth to achieve it but in a later incremental patch. [peterx@redhat.com: don't conditionally drop FAULT_FLAG_WRITE in do_swap_page] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Link: http://lkml.kernel.org/r/20200220163112.11409-3-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:29 +00:00
return handle_userfault(vmf, VM_UFFD_WP);
userfaultfd: UFFD_FEATURE_WP_ASYNC Patch series "Implement IOCTL to get and optionally clear info about PTEs", v33. *Motivation* The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch() retrieves the addresses of the pages that are written to in a region of virtual memory. This syscall is used in Windows applications and games etc. This syscall is being emulated in pretty slow manner in userspace. Our purpose is to enhance the kernel such that we translate it efficiently in a better way. Currently some out of tree hack patches are being used to efficiently emulate it in some kernels. We intend to replace those with these patches. So the whole gaming on Linux can effectively get benefit from this. It means there would be tons of users of this code. CRIU use case [2] was mentioned by Andrei and Danylo: > Use cases for migrating sparse VMAs are binaries sanitized with ASAN, > MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of > shadow memory [4]. Being able to migrate such binaries allows to highly > reduce the amount of work needed to identify and fix post-migration > crashes, which happen constantly. Andrei defines the following uses of this code: * it is more granular and allows us to track changed pages more effectively. The current interface can clear dirty bits for the entire process only. In addition, reading info about pages is a separate operation. It means we must freeze the process to read information about all its pages, reset dirty bits, only then we can start dumping pages. The information about pages becomes more and more outdated, while we are processing pages. The new interface solves both these downsides. First, it allows us to read pte bits and clear the soft-dirty bit atomically. It means that CRIU will not need to freeze processes to pre-dump their memory. Second, it clears soft-dirty bits for a specified region of memory. It means CRIU will have actual info about pages to the moment of dumping them. * The new interface has to be much faster because basic page filtering is happening in the kernel. With the old interface, we have to read pagemap for each page. *Implementation Evolution (Short Summary)* From the definition of GetWriteWatch(), we feel like kernel's soft-dirty feature can be used under the hood with some additions like: * reset soft-dirty flag for only a specific region of memory instead of clearing the flag for the entire process * get and clear soft-dirty flag for a specific region atomically So we decided to use ioctl on pagemap file to read or/and reset soft-dirty flag. But using soft-dirty flag, sometimes we get extra pages which weren't even written. They had become soft-dirty because of VMA merging and VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were able to by-pass this short coming by ignoring VM_SOFTDIRTY until David reported that mprotect etc messes up the soft-dirty flag while ignoring VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We discussed if we can revert these patches. But we could not reach to any conclusion. So at this point, I made couple of tries to solve this whole VM_SOFTDIRTY issue by correcting the soft-dirty implementation: * [7] Correct the bug fixed wrongly back in 2014. It had potential to cause regression. We left it behind. * [8] Keep a list of soft-dirty part of a VMA across splits and merges. I got the reply don't increase the size of the VMA by 8 bytes. At this point, we left soft-dirty considering it is too much delicate and userfaultfd [9] seemed like the only way forward. From there onward, we have been basing soft-dirty emulation on userfaultfd wp feature where kernel resolves the faults itself when WP_ASYNC feature is used. It was straight forward to add WP_ASYNC feature in userfautlfd. Now we get only those pages dirty or written-to which are really written in reality. (PS There is another WP_UNPOPULATED userfautfd feature is required which is needed to avoid pre-faulting memory before write-protecting [9].) All the different masks were added on the request of CRIU devs to create interface more generic and better. [1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch [2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com [3] https://github.com/google/sanitizers [4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit [5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com [6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/ [7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com [8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com [9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com [10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com This patch (of 6): Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows userfaultfd wr-protect faults to be resolved by the kernel directly. It can be used like a high accuracy version of soft-dirty, without vma modifications during tracking, and also with ranged support by default rather than for a whole mm when reset the protections due to existence of ioctl(UFFDIO_WRITEPROTECT). Several goals of such a dirty tracking interface: 1. All types of memory should be supported and tracable. This is nature for soft-dirty but should mention when the context is userfaultfd, because it used to only support anon/shmem/hugetlb. The problem is for a dirty tracking purpose these three types may not be enough, and it's legal to track anything e.g. any page cache writes from mmap. 2. Protections can be applied to partial of a memory range, without vma split/merge fuss. The hope is that the tracking itself should not affect any vma layout change. It also helps when reset happens because the reset will not need mmap write lock which can block the tracee. 3. Accuracy needs to be maintained. This means we need pte markers to work on any type of VMA. One could question that, the whole concept of async dirty tracking is not really close to fundamentally what userfaultfd used to be: it's not "a fault to be serviced by userspace" anymore. However, using userfaultfd-wp here as a framework is convenient for us in at least: 1. VM_UFFD_WP vma flag, which has a very good name to suite something like this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new feature bit to identify from a sync version of uffd-wp registration. 2. PTE markers logic can be leveraged across the whole kernel to maintain the uffd-wp bit as long as an arch supports, this also applies to this case where uffd-wp bit will be a hint to dirty information and it will not go lost easily (e.g. when some page cache ptes got zapped). 3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or resetting a range of memory, while there's no counterpart in the old soft-dirty world, hence if this is wanted in a new design we'll need a new interface otherwise. We can somehow understand that commonality because uffd-wp was fundamentally a similar idea of write-protecting pages just like soft-dirty. This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also gives us chance to modify impl of WP_ASYNC just in case it could be not depending on WP_UNPOPULATED anymore in the future kernels. It's also fine to imply that because both features will rely on PTE_MARKER_UFFD_WP config option, so they'll show up together (or both missing) in an UFFDIO_API probe. vma_can_userfault() now allows any VMA if the userfaultfd registration is only about async uffd-wp. So we can track dirty for all kinds of memory including generic file systems (like XFS, EXT4 or BTRFS). One trick worth mention in do_wp_page() is that we need to manually update vmf->orig_pte here because it can be used later with a pte_same() check - this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags. The major defect of this approach of dirty tracking is we need to populate the pgtables when tracking starts. Soft-dirty doesn't do it like that. It's unwanted in the case where the range of memory to track is huge and unpopulated (e.g., tracking updates on a 10G file with mmap() on top, without having any page cache installed yet). One way to improve this is to allow pte markers exist for larger than PTE level for PMD+. That will not change the interface if to implemented, so we can leave that for later. Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com Signed-off-by: Peter Xu <peterx@redhat.com> Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrei Vagin <avagin@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Miroslaw <emmir@google.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Paul Gofman <pgofman@codeweavers.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yun Zhou <yun.zhou@windriver.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
}
mm: memory: add orig_pmd to struct vm_fault Pach series "mm: thp: use generic THP migration for NUMA hinting fault", v3. When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. It is definitely a maintenance burden to keep two THP migration implementation for different code paths and it is more error prone. Using the generic THP migration implementation allows us remove the duplicate code and some hacks needed by the old ad hoc implementation. A quick grep shows x86_64, PowerPC (book3s), ARM64 ans S390 support both THP and NUMA balancing. The most of them support THP migration except for S390. Zi Yan tried to add THP migration support for S390 before but it was not accepted due to the design of S390 PMD. For the discussion, please see: https://lkml.org/lkml/2018/4/27/953. Per the discussion with Gerald Schaefer in v1 it is acceptible to skip huge PMD for S390 for now. I saw there were some hacks about gup from git history, but I didn't figure out if they have been removed or not since I just found FOLL_NUMA code in the current gup implementation and they seems useful. Patch #1 ~ #2 are preparation patches. Patch #3 is the real meat. Patch #4 ~ #6 keep consistent counters and behaviors with before. Patch #7 skips change huge PMD to prot_none if thp migration is not supported. Test ---- Did some tests to measure the latency of do_huge_pmd_numa_page. The test VM has 80 vcpus and 64G memory. The test would create 2 processes to consume 128G memory together which would incur memory pressure to cause THP splits. And it also creates 80 processes to hog cpu, and the memory consumer processes are bound to different nodes periodically in order to increase NUMA faults. The below test script is used: echo 3 > /proc/sys/vm/drop_caches # Run stress-ng for 24 hours ./stress-ng/stress-ng --vm 2 --vm-bytes 64G --timeout 24h & PID=$! ./stress-ng/stress-ng --cpu $NR_CPUS --timeout 24h & # Wait for vm stressors forked sleep 5 PID_1=`pgrep -P $PID | awk 'NR == 1'` PID_2=`pgrep -P $PID | awk 'NR == 2'` JOB1=`pgrep -P $PID_1` JOB2=`pgrep -P $PID_2` # Bind load jobs to different nodes periodically to force generate # cross node memory access while [ -d "/proc/$PID" ] do taskset -apc 8 $JOB1 taskset -apc 8 $JOB2 sleep 300 taskset -apc 58 $JOB1 taskset -apc 58 $JOB2 sleep 300 done With the above test the histogram of latency of do_huge_pmd_numa_page is as shown below. Since the number of do_huge_pmd_numa_page varies drastically for each run (should be due to scheduler), so I converted the raw number to percentage. patched base @us[stress-ng]: [0] 3.57% 0.16% [1] 55.68% 18.36% [2, 4) 10.46% 40.44% [4, 8) 7.26% 17.82% [8, 16) 21.12% 13.41% [16, 32) 1.06% 4.27% [32, 64) 0.56% 4.07% [64, 128) 0.16% 0.35% [128, 256) < 0.1% < 0.1% [256, 512) < 0.1% < 0.1% [512, 1K) < 0.1% < 0.1% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) < 0.1% < 0.1% [16K, 32K) < 0.1% < 0.1% [32K, 64K) < 0.1% < 0.1% Per the result, patched kernel is even slightly better than the base kernel. I think this is because the lock contention against THP split is less than base kernel due to the refactor. To exclude the affect from THP split, I also did test w/o memory pressure. No obvious regression is spotted. The below is the test result *w/o* memory pressure. patched base @us[stress-ng]: [0] 7.97% 18.4% [1] 69.63% 58.24% [2, 4) 4.18% 2.63% [4, 8) 0.22% 0.17% [8, 16) 1.03% 0.92% [16, 32) 0.14% < 0.1% [32, 64) < 0.1% < 0.1% [64, 128) < 0.1% < 0.1% [128, 256) < 0.1% < 0.1% [256, 512) 0.45% 1.19% [512, 1K) 15.45% 17.27% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) 0.86% 0.88% [16K, 32K) < 0.1% 0.15% [32K, 64K) < 0.1% < 0.1% [64K, 128K) < 0.1% < 0.1% [128K, 256K) < 0.1% < 0.1% The series also survived a series of tests that exercise NUMA balancing migrations by Mel. This patch (of 7): Add orig_pmd to struct vm_fault so the "orig_pmd" parameter used by huge page fault could be removed, just like its PTE counterpart does. Link: https://lkml.kernel.org/r/20210518200801.7413-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20210518200801.7413-2-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:51:35 +00:00
return do_huge_pmd_wp_page(vmf);
userfaultfd: wp: hook userfault handler to write protection fault There are several cases write protection fault happens. It could be a write to zero page, swaped page or userfault write protected page. When the fault happens, there is no way to know if userfault write protect the page before. Here we just blindly issue a userfault notification for vma with VM_UFFD_WP regardless if app write protects it yet. Application should be ready to handle such wp fault. In the swapin case, always swapin as readonly. This will cause false positive userfaults. We need to decide later if to eliminate them with a flag like soft-dirty in the swap entry (see _PAGE_SWP_SOFT_DIRTY). hugetlbfs wouldn't need to worry about swapouts but and tmpfs would be handled by a swap entry bit like anonymous memory. The main problem with no easy solution to eliminate the false positives, will be if/when userfaultfd is extended to real filesystem pagecache. When the pagecache is freed by reclaim we can't leave the radix tree pinned if the inode and in turn the radix tree is reclaimed as well. The estimation is that full accuracy and lack of false positives could be easily provided only to anonymous memory (as long as there's no fork or as long as MADV_DONTFORK is used on the userfaultfd anonymous range) tmpfs and hugetlbfs, it's most certainly worth to achieve it but in a later incremental patch. [peterx@redhat.com: don't conditionally drop FAULT_FLAG_WRITE in do_swap_page] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Link: http://lkml.kernel.org/r/20200220163112.11409-3-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:05:29 +00:00
}
if (vma->vm_flags & (VM_SHARED | VM_MAYSHARE)) {
if (vma->vm_ops->huge_fault) {
ret = vma->vm_ops->huge_fault(vmf, PMD_ORDER);
if (!(ret & VM_FAULT_FALLBACK))
return ret;
}
}
userfaultfd: UFFD_FEATURE_WP_ASYNC Patch series "Implement IOCTL to get and optionally clear info about PTEs", v33. *Motivation* The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch() retrieves the addresses of the pages that are written to in a region of virtual memory. This syscall is used in Windows applications and games etc. This syscall is being emulated in pretty slow manner in userspace. Our purpose is to enhance the kernel such that we translate it efficiently in a better way. Currently some out of tree hack patches are being used to efficiently emulate it in some kernels. We intend to replace those with these patches. So the whole gaming on Linux can effectively get benefit from this. It means there would be tons of users of this code. CRIU use case [2] was mentioned by Andrei and Danylo: > Use cases for migrating sparse VMAs are binaries sanitized with ASAN, > MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of > shadow memory [4]. Being able to migrate such binaries allows to highly > reduce the amount of work needed to identify and fix post-migration > crashes, which happen constantly. Andrei defines the following uses of this code: * it is more granular and allows us to track changed pages more effectively. The current interface can clear dirty bits for the entire process only. In addition, reading info about pages is a separate operation. It means we must freeze the process to read information about all its pages, reset dirty bits, only then we can start dumping pages. The information about pages becomes more and more outdated, while we are processing pages. The new interface solves both these downsides. First, it allows us to read pte bits and clear the soft-dirty bit atomically. It means that CRIU will not need to freeze processes to pre-dump their memory. Second, it clears soft-dirty bits for a specified region of memory. It means CRIU will have actual info about pages to the moment of dumping them. * The new interface has to be much faster because basic page filtering is happening in the kernel. With the old interface, we have to read pagemap for each page. *Implementation Evolution (Short Summary)* From the definition of GetWriteWatch(), we feel like kernel's soft-dirty feature can be used under the hood with some additions like: * reset soft-dirty flag for only a specific region of memory instead of clearing the flag for the entire process * get and clear soft-dirty flag for a specific region atomically So we decided to use ioctl on pagemap file to read or/and reset soft-dirty flag. But using soft-dirty flag, sometimes we get extra pages which weren't even written. They had become soft-dirty because of VMA merging and VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were able to by-pass this short coming by ignoring VM_SOFTDIRTY until David reported that mprotect etc messes up the soft-dirty flag while ignoring VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We discussed if we can revert these patches. But we could not reach to any conclusion. So at this point, I made couple of tries to solve this whole VM_SOFTDIRTY issue by correcting the soft-dirty implementation: * [7] Correct the bug fixed wrongly back in 2014. It had potential to cause regression. We left it behind. * [8] Keep a list of soft-dirty part of a VMA across splits and merges. I got the reply don't increase the size of the VMA by 8 bytes. At this point, we left soft-dirty considering it is too much delicate and userfaultfd [9] seemed like the only way forward. From there onward, we have been basing soft-dirty emulation on userfaultfd wp feature where kernel resolves the faults itself when WP_ASYNC feature is used. It was straight forward to add WP_ASYNC feature in userfautlfd. Now we get only those pages dirty or written-to which are really written in reality. (PS There is another WP_UNPOPULATED userfautfd feature is required which is needed to avoid pre-faulting memory before write-protecting [9].) All the different masks were added on the request of CRIU devs to create interface more generic and better. [1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch [2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com [3] https://github.com/google/sanitizers [4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit [5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com [6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/ [7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com [8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com [9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com [10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com This patch (of 6): Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows userfaultfd wr-protect faults to be resolved by the kernel directly. It can be used like a high accuracy version of soft-dirty, without vma modifications during tracking, and also with ranged support by default rather than for a whole mm when reset the protections due to existence of ioctl(UFFDIO_WRITEPROTECT). Several goals of such a dirty tracking interface: 1. All types of memory should be supported and tracable. This is nature for soft-dirty but should mention when the context is userfaultfd, because it used to only support anon/shmem/hugetlb. The problem is for a dirty tracking purpose these three types may not be enough, and it's legal to track anything e.g. any page cache writes from mmap. 2. Protections can be applied to partial of a memory range, without vma split/merge fuss. The hope is that the tracking itself should not affect any vma layout change. It also helps when reset happens because the reset will not need mmap write lock which can block the tracee. 3. Accuracy needs to be maintained. This means we need pte markers to work on any type of VMA. One could question that, the whole concept of async dirty tracking is not really close to fundamentally what userfaultfd used to be: it's not "a fault to be serviced by userspace" anymore. However, using userfaultfd-wp here as a framework is convenient for us in at least: 1. VM_UFFD_WP vma flag, which has a very good name to suite something like this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new feature bit to identify from a sync version of uffd-wp registration. 2. PTE markers logic can be leveraged across the whole kernel to maintain the uffd-wp bit as long as an arch supports, this also applies to this case where uffd-wp bit will be a hint to dirty information and it will not go lost easily (e.g. when some page cache ptes got zapped). 3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or resetting a range of memory, while there's no counterpart in the old soft-dirty world, hence if this is wanted in a new design we'll need a new interface otherwise. We can somehow understand that commonality because uffd-wp was fundamentally a similar idea of write-protecting pages just like soft-dirty. This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also gives us chance to modify impl of WP_ASYNC just in case it could be not depending on WP_UNPOPULATED anymore in the future kernels. It's also fine to imply that because both features will rely on PTE_MARKER_UFFD_WP config option, so they'll show up together (or both missing) in an UFFDIO_API probe. vma_can_userfault() now allows any VMA if the userfaultfd registration is only about async uffd-wp. So we can track dirty for all kinds of memory including generic file systems (like XFS, EXT4 or BTRFS). One trick worth mention in do_wp_page() is that we need to manually update vmf->orig_pte here because it can be used later with a pte_same() check - this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags. The major defect of this approach of dirty tracking is we need to populate the pgtables when tracking starts. Soft-dirty doesn't do it like that. It's unwanted in the case where the range of memory to track is huge and unpopulated (e.g., tracking updates on a 10G file with mmap() on top, without having any page cache installed yet). One way to improve this is to allow pte markers exist for larger than PTE level for PMD+. That will not change the interface if to implemented, so we can leave that for later. Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com Signed-off-by: Peter Xu <peterx@redhat.com> Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrei Vagin <avagin@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Miroslaw <emmir@google.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Paul Gofman <pgofman@codeweavers.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yun Zhou <yun.zhou@windriver.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
split:
/* COW or write-notify handled on pte level: split pmd. */
__split_huge_pmd(vma, vmf->pmd, vmf->address, false, NULL);
return VM_FAULT_FALLBACK;
}
static vm_fault_t create_huge_pud(struct vm_fault *vmf)
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
{
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) && \
defined(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD)
struct vm_area_struct *vma = vmf->vma;
/* No support for anonymous transparent PUD pages yet */
if (vma_is_anonymous(vma))
return VM_FAULT_FALLBACK;
if (vma->vm_ops->huge_fault)
return vma->vm_ops->huge_fault(vmf, PUD_ORDER);
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
return VM_FAULT_FALLBACK;
}
static vm_fault_t wp_huge_pud(struct vm_fault *vmf, pud_t orig_pud)
{
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) && \
defined(CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD)
struct vm_area_struct *vma = vmf->vma;
vm_fault_t ret;
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
/* No support for anonymous transparent PUD pages yet */
if (vma_is_anonymous(vma))
goto split;
if (vma->vm_flags & (VM_SHARED | VM_MAYSHARE)) {
if (vma->vm_ops->huge_fault) {
ret = vma->vm_ops->huge_fault(vmf, PUD_ORDER);
if (!(ret & VM_FAULT_FALLBACK))
return ret;
}
}
split:
/* COW or write-notify not handled on PUD level: split pud.*/
__split_huge_pud(vma, vmf->pud, vmf->address);
#endif /* CONFIG_TRANSPARENT_HUGEPAGE && CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD */
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
return VM_FAULT_FALLBACK;
}
/*
* These routines also need to handle stuff like marking pages dirty
* and/or accessed for architectures that don't do it in hardware (most
* RISC architectures). The early dirtying is also good on the i386.
*
* There is also a hook called "update_mmu_cache()" that architectures
* with external mmu caches can use to update those (ie the Sparc or
* PowerPC hashed page tables that act as extended TLBs).
*
* We enter with non-exclusive mmap_lock (to exclude vma changes, but allow
* concurrent faults).
*
* The mmap_lock may have been released depending on flags and our return value.
* See filemap_fault() and __folio_lock_or_retry().
*/
static vm_fault_t handle_pte_fault(struct vm_fault *vmf)
{
pte_t entry;
if (unlikely(pmd_none(*vmf->pmd))) {
/*
* Leave __pte_alloc() until later: because vm_ops->fault may
* want to allocate huge page, and if we expose page table
* for an instant, it will be difficult to retract from
* concurrent faults and from rmap lookups.
*/
vmf->pte = NULL;
mm: check against orig_pte for finish_fault() This patch allows do_fault() to trigger on !pte_none() cases too. This prepares for the pte markers to be handled by do_fault() just like none pte. To achieve this, instead of unconditionally check against pte_none() in finish_fault(), we may hit the case that the orig_pte was some pte marker so what we want to do is to replace the pte marker with some valid pte entry. Then if orig_pte was set we'd want to check the current *pte (under pgtable lock) against orig_pte rather than none pte. Right now there's no solid way to safely reference orig_pte because when pmd is not allocated handle_pte_fault() will not initialize orig_pte, so it's not safe to reference it. There's another solution proposed before this patch to do pte_clear() for vmf->orig_pte for pmd==NULL case, however it turns out it'll break arm32 because arm32 could have assumption that pte_t* pointer will always reside on a real ram32 pgtable, not any kernel stack variable. To solve this, we add a new flag FAULT_FLAG_ORIG_PTE_VALID, and it'll be set along with orig_pte when there is valid orig_pte, or it'll be cleared when orig_pte was not initialized. It'll be updated every time we call handle_pte_fault(), so e.g. if a page fault retry happened it'll be properly updated along with orig_pte. [1] https://lore.kernel.org/lkml/710c48c9-406d-e4c5-a394-10501b951316@samsung.com/ [akpm@linux-foundation.org: coding-style cleanups] [peterx@redhat.com: fix crash reported by Marek] Link: https://lkml.kernel.org/r/Ylb9rXJyPm8/ao8f@xz-m1.local Link: https://lkml.kernel.org/r/20220405014836.14077-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:52 +00:00
vmf->flags &= ~FAULT_FLAG_ORIG_PTE_VALID;
} else {
/*
* A regular pmd is established and it can't morph into a huge
mm/memory: handle_pte_fault() use pte_offset_map_nolock() handle_pte_fault() use pte_offset_map_nolock() to get the vmf.ptl which corresponds to vmf.pte, instead of pte_lockptr() being used later, when there's a chance that the pmd entry might have changed, perhaps to none, or to a huge pmd, with no split ptlock in its struct page. Remove its pmd_devmap_trans_unstable() call: pte_offset_map_nolock() will handle that case by failing. Update the "morph" comment above, looking forward to when shmem or file collapse to THP may not take mmap_lock for write (or not at all). do_numa_page() use the vmf->ptl from handle_pte_fault() at first, but refresh it when refreshing vmf->pte. do_swap_page()'s pte_unmap_same() (the thing that takes ptl to verify a two-part PAE orig_pte) use the vmf->ptl from handle_pte_fault() too; but do_swap_page() is also used by anon THP's __collapse_huge_page_swapin(), so adjust that to set vmf->ptl by pte_offset_map_nolock(). Link: https://lkml.kernel.org/r/c1107654-3929-60ac-223e-6877cbb86065@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:45:05 +00:00
* pmd by anon khugepaged, since that takes mmap_lock in write
* mode; but shmem or file collapse to THP could still morph
* it into a huge pmd: just retry later if so.
*/
mm/memory: handle_pte_fault() use pte_offset_map_nolock() handle_pte_fault() use pte_offset_map_nolock() to get the vmf.ptl which corresponds to vmf.pte, instead of pte_lockptr() being used later, when there's a chance that the pmd entry might have changed, perhaps to none, or to a huge pmd, with no split ptlock in its struct page. Remove its pmd_devmap_trans_unstable() call: pte_offset_map_nolock() will handle that case by failing. Update the "morph" comment above, looking forward to when shmem or file collapse to THP may not take mmap_lock for write (or not at all). do_numa_page() use the vmf->ptl from handle_pte_fault() at first, but refresh it when refreshing vmf->pte. do_swap_page()'s pte_unmap_same() (the thing that takes ptl to verify a two-part PAE orig_pte) use the vmf->ptl from handle_pte_fault() too; but do_swap_page() is also used by anon THP's __collapse_huge_page_swapin(), so adjust that to set vmf->ptl by pte_offset_map_nolock(). Link: https://lkml.kernel.org/r/c1107654-3929-60ac-223e-6877cbb86065@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:45:05 +00:00
vmf->pte = pte_offset_map_nolock(vmf->vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
if (unlikely(!vmf->pte))
return 0;
mm: use pmdp_get_lockless() without surplus barrier() Patch series "mm: allow pte_offset_map[_lock]() to fail", v2. What is it all about? Some mmap_lock avoidance i.e. latency reduction. Initially just for the case of collapsing shmem or file pages to THPs; but likely to be relied upon later in other contexts e.g. freeing of empty page tables (but that's not work I'm doing). mmap_write_lock avoidance when collapsing to anon THPs? Perhaps, but again that's not work I've done: a quick attempt was not as easy as the shmem/file case. I would much prefer not to have to make these small but wide-ranging changes for such a niche case; but failed to find another way, and have heard that shmem MADV_COLLAPSE's usefulness is being limited by that mmap_write_lock it currently requires. These changes (though of course not these exact patches) have been in Google's data centre kernel for three years now: we do rely upon them. What is this preparatory series about? The current mmap locking will not be enough to guard against that tricky transition between pmd entry pointing to page table, and empty pmd entry, and pmd entry pointing to huge page: pte_offset_map() will have to validate the pmd entry for itself, returning NULL if no page table is there. What to do about that varies: sometimes nearby error handling indicates just to skip it; but in many cases an ACTION_AGAIN or "goto again" is appropriate (and if that risks an infinite loop, then there must have been an oops, or pfn 0 mistaken for page table, before). Given the likely extension to freeing empty page tables, I have not limited this set of changes to a THP config; and it has been easier, and sets a better example, if each site is given appropriate handling: even where deeper study might prove that failure could only happen if the pmd table were corrupted. Several of the patches are, or include, cleanup on the way; and by the end, pmd_trans_unstable() and suchlike are deleted: pte_offset_map() and pte_offset_map_lock() then handle those original races and more. Most uses of pte_lockptr() are deprecated, with pte_offset_map_nolock() taking its place. This patch (of 32): Use pmdp_get_lockless() in preference to READ_ONCE(*pmdp), to get a more reliable result with PAE (or READ_ONCE as before without PAE); and remove the unnecessary extra barrier()s which got left behind in its callers. HOWEVER: Note the small print in linux/pgtable.h, where it was designed specifically for fast GUP, and depends on interrupts being disabled for its full guarantee: most callers which have been added (here and before) do NOT have interrupts disabled, so there is still some need for caution. Link: https://lkml.kernel.org/r/f35279a9-9ac0-de22-d245-591afbfb4dc@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:06:53 +00:00
vmf->orig_pte = ptep_get_lockless(vmf->pte);
mm: check against orig_pte for finish_fault() This patch allows do_fault() to trigger on !pte_none() cases too. This prepares for the pte markers to be handled by do_fault() just like none pte. To achieve this, instead of unconditionally check against pte_none() in finish_fault(), we may hit the case that the orig_pte was some pte marker so what we want to do is to replace the pte marker with some valid pte entry. Then if orig_pte was set we'd want to check the current *pte (under pgtable lock) against orig_pte rather than none pte. Right now there's no solid way to safely reference orig_pte because when pmd is not allocated handle_pte_fault() will not initialize orig_pte, so it's not safe to reference it. There's another solution proposed before this patch to do pte_clear() for vmf->orig_pte for pmd==NULL case, however it turns out it'll break arm32 because arm32 could have assumption that pte_t* pointer will always reside on a real ram32 pgtable, not any kernel stack variable. To solve this, we add a new flag FAULT_FLAG_ORIG_PTE_VALID, and it'll be set along with orig_pte when there is valid orig_pte, or it'll be cleared when orig_pte was not initialized. It'll be updated every time we call handle_pte_fault(), so e.g. if a page fault retry happened it'll be properly updated along with orig_pte. [1] https://lore.kernel.org/lkml/710c48c9-406d-e4c5-a394-10501b951316@samsung.com/ [akpm@linux-foundation.org: coding-style cleanups] [peterx@redhat.com: fix crash reported by Marek] Link: https://lkml.kernel.org/r/Ylb9rXJyPm8/ao8f@xz-m1.local Link: https://lkml.kernel.org/r/20220405014836.14077-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 03:22:52 +00:00
vmf->flags |= FAULT_FLAG_ORIG_PTE_VALID;
if (pte_none(vmf->orig_pte)) {
pte_unmap(vmf->pte);
vmf->pte = NULL;
}
}
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4. The new feature bit makes anonymous memory acts the same as file memory on userfaultfd-wp in that it'll also wr-protect none ptes. It can be useful in two cases: (1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot, so pre-fault can be replaced by enabling this flag and speed up protections (2) It helps to implement async uffd-wp mode that Muhammad is working on [1] It's debatable whether this is the most ideal solution because with the new feature bit set, wr-protect none pte needs to pre-populate the pgtables to the last level (PAGE_SIZE). But it seems fine so far to service either purpose above, so we can leave optimizations for later. The series brings pte markers to anonymous memory too. There's some change in the common mm code path in the 1st patch, great to have some eye looking at it, but hopefully they're still relatively straightforward. This patch (of 2): This is a new feature that controls how uffd-wp handles none ptes. When it's set, the kernel will handle anonymous memory the same way as file memory, by allowing the user to wr-protect unpopulated ptes. File memories handles none ptes consistently by allowing wr-protecting of none ptes because of the unawareness of page cache being exist or not. For anonymous it was not as persistent because we used to assume that we don't need protections on none ptes or known zero pages. One use case of such a feature bit was VM live snapshot, where if without wr-protecting empty ptes the snapshot can contain random rubbish in the holes of the anonymous memory, which can cause misbehave of the guest when the guest OS assumes the pages should be all zeros. QEMU worked it around by pre-populate the section with reads to fill in zero page entries before starting the whole snapshot process [1]. Recently there's another need raised on using userfaultfd wr-protect for detecting dirty pages (to replace soft-dirty in some cases) [2]. In that case if without being able to wr-protect none ptes by default, the dirty info can get lost, since we cannot treat every none pte to be dirty (the current design is identify a page dirty based on uffd-wp bit being cleared). In general, we want to be able to wr-protect empty ptes too even for anonymous. This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make uffd-wp handling on none ptes being consistent no matter what the memory type is underneath. It doesn't have any impact on file memories so far because we already have pte markers taking care of that. So it only affects anonymous. The feature bit is by default off, so the old behavior will be maintained. Sometimes it may be wanted because the wr-protect of none ptes will contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte markers to anonymous), but also on creating the pgtables to store the pte markers. So there's potentially less chance of using thp on the first fault for a none pmd or larger than a pmd. The major implementation part is teaching the whole kernel to understand pte markers even for anonymously mapped ranges, meanwhile allowing the UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the new feature bit is set. Note that even if the patch subject starts with mm/uffd, there're a few small refactors to major mm path of handling anonymous page faults. But they should be straightforward. With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all the memory before wr-protect during taking a live snapshot. Quotting from Muhammad's test result here [3] based on a simple program [4]: (1) With huge page disabled echo madvise > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 1111453 (pre-fault 1101011) Test MADVISE: 278276 (pre-fault 266378) Test WP-UNPOPULATE: 11712 (2) With Huge page enabled echo always > /sys/kernel/mm/transparent_hugepage/enabled ./uffd_wp_perf Test DEFAULT: 4 Test PRE-READ: 22521 (pre-fault 22348) Test MADVISE: 4909 (pre-fault 4743) Test WP-UNPOPULATE: 14448 There'll be a great perf boost for no-thp case, while for thp enabled with extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE, but that's low possibility in reality, also the overhead was not reduced but postponed until a follow up write on any huge zero thp, so potentially it is faster by making the follow up writes slower. [1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/ [2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/ [3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/ [4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c [peterx@redhat.com: comment changes, oneliner fix to khugepaged] Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Gofman <pgofman@codeweavers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-09 22:37:10 +00:00
if (!vmf->pte)
return do_pte_missing(vmf);
if (!pte_present(vmf->orig_pte))
return do_swap_page(vmf);
if (pte_protnone(vmf->orig_pte) && vma_is_accessible(vmf->vma))
return do_numa_page(vmf);
spin_lock(vmf->ptl);
entry = vmf->orig_pte;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (unlikely(!pte_same(ptep_get(vmf->pte), entry))) {
update_mmu_tlb(vmf->vma, vmf->address, vmf->pte);
goto unlock;
}
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
if (vmf->flags & (FAULT_FLAG_WRITE|FAULT_FLAG_UNSHARE)) {
Revert "mm: replace p??_write with pte_access_permitted in fault + gup paths" This reverts commits 5c9d2d5c269c, c7da82b894e9, and e7fe7b5cae90. We'll probably need to revisit this, but basically we should not complicate the get_user_pages_fast() case, and checking the actual page table protection key bits will require more care anyway, since the protection keys depend on the exact state of the VM in question. Particularly when doing a "remote" page lookup (ie in somebody elses VM, not your own), you need to be much more careful than this was. Dave Hansen says: "So, the underlying bug here is that we now a get_user_pages_remote() and then go ahead and do the p*_access_permitted() checks against the current PKRU. This was introduced recently with the addition of the new p??_access_permitted() calls. We have checks in the VMA path for the "remote" gups and we avoid consulting PKRU for them. This got missed in the pkeys selftests because I did a ptrace read, but not a *write*. I also didn't explicitly test it against something where a COW needed to be done" It's also not entirely clear that it makes sense to check the protection key bits at this level at all. But one possible eventual solution is to make the get_user_pages_fast() case just abort if it sees protection key bits set, which makes us fall back to the regular get_user_pages() case, which then has a vma and can do the check there if we want to. We'll see. Somewhat related to this all: what we _do_ want to do some day is to check the PAGE_USER bit - it should obviously always be set for user pages, but it would be a good check to have back. Because we have no generic way to test for it, we lost it as part of moving over from the architecture-specific x86 GUP implementation to the generic one in commit e585513b76f7 ("x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"). Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-16 02:53:22 +00:00
if (!pte_write(entry))
return do_wp_page(vmf);
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
else if (likely(vmf->flags & FAULT_FLAG_WRITE))
entry = pte_mkdirty(entry);
}
entry = pte_mkyoung(entry);
if (ptep_set_access_flags(vmf->vma, vmf->address, vmf->pte, entry,
vmf->flags & FAULT_FLAG_WRITE)) {
update_mmu_cache_range(vmf, vmf->vma, vmf->address,
vmf->pte, 1);
} else {
/* Skip spurious TLB flush for retried page fault */
if (vmf->flags & FAULT_FLAG_TRIED)
goto unlock;
/*
* This is needed only for protection faults but the arch code
* is not yet telling us if this is a protection fault or not.
* This still avoids useless tlb flushes for .text page faults
* with threads.
*/
if (vmf->flags & FAULT_FLAG_WRITE)
flush_tlb_fix_spurious_fault(vmf->vma, vmf->address,
vmf->pte);
}
unlock:
pte_unmap_unlock(vmf->pte, vmf->ptl);
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 08:47:05 +00:00
return 0;
}
/*
* On entry, we hold either the VMA lock or the mmap_lock
* (FAULT_FLAG_VMA_LOCK tells you which). If VM_FAULT_RETRY is set in
* the result, the mmap_lock is not held on exit. See filemap_fault()
* and __folio_lock_or_retry().
*/
static vm_fault_t __handle_mm_fault(struct vm_area_struct *vma,
unsigned long address, unsigned int flags)
{
struct vm_fault vmf = {
.vma = vma,
.address = address & PAGE_MASK,
userfaultfd: provide unmasked address on page-fault Userfaultfd is supposed to provide the full address (i.e., unmasked) of the faulting access back to userspace. However, that is not the case for quite some time. Even running "userfaultfd_demo" from the userfaultfd man page provides the wrong output (and contradicts the man page). Notice that "UFFD_EVENT_PAGEFAULT event" shows the masked address (7fc5e30b3000) and not the first read address (0x7fc5e30b300f). Address returned by mmap() = 0x7fc5e30b3000 fault_handler_thread(): poll() returns: nready = 1; POLLIN = 1; POLLERR = 0 UFFD_EVENT_PAGEFAULT event: flags = 0; address = 7fc5e30b3000 (uffdio_copy.copy returned 4096) Read address 0x7fc5e30b300f in main(): A Read address 0x7fc5e30b340f in main(): A Read address 0x7fc5e30b380f in main(): A Read address 0x7fc5e30b3c0f in main(): A The exact address is useful for various reasons and specifically for prefetching decisions. If it is known that the memory is populated by certain objects whose size is not page-aligned, then based on the faulting address, the uffd-monitor can decide whether to prefetch and prefault the adjacent page. This bug has been for quite some time in the kernel: since commit 1a29d85eb0f1 ("mm: use vmf->address instead of of vmf->virtual_address") vmf->virtual_address"), which dates back to 2016. A concern has been raised that existing userspace application might rely on the old/wrong behavior in which the address is masked. Therefore, it was suggested to provide the masked address unless the user explicitly asks for the exact address. Add a new userfaultfd feature UFFD_FEATURE_EXACT_ADDRESS to direct userfaultfd to provide the exact address. Add a new "real_address" field to vmf to hold the unmasked address. Provide the address to userspace accordingly. Initialize real_address in various code-paths to be consistent with address, even when it is not used, to be on the safe side. [namit@vmware.com: initialize real_address on all code paths, per Jan] Link: https://lkml.kernel.org/r/20220226022655.350562-1-namit@vmware.com [akpm@linux-foundation.org: fix typo in comment, per Jan] Link: https://lkml.kernel.org/r/20220218041003.3508-1-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:45:32 +00:00
.real_address = address,
.flags = flags,
.pgoff = linear_page_index(vma, address),
.gfp_mask = __get_fault_gfp_mask(vma),
};
struct mm_struct *mm = vma->vm_mm;
unsigned long vm_flags = vma->vm_flags;
pgd_t *pgd;
p4d_t *p4d;
vm_fault_t ret;
pgd = pgd_offset(mm, address);
p4d = p4d_alloc(mm, pgd, address);
if (!p4d)
return VM_FAULT_OOM;
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
vmf.pud = pud_alloc(mm, p4d, address);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
if (!vmf.pud)
return VM_FAULT_OOM;
retry_pud:
if (pud_none(*vmf.pud) &&
thp_vma_allowable_order(vma, vm_flags,
TVA_IN_PF | TVA_ENFORCE_SYSFS, PUD_ORDER)) {
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
ret = create_huge_pud(&vmf);
if (!(ret & VM_FAULT_FALLBACK))
return ret;
} else {
pud_t orig_pud = *vmf.pud;
barrier();
if (pud_trans_huge(orig_pud) || pud_devmap(orig_pud)) {
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
/*
* TODO once we support anonymous PUDs: NUMA case and
* FAULT_FLAG_UNSHARE handling.
*/
if ((flags & FAULT_FLAG_WRITE) && !pud_write(orig_pud)) {
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
ret = wp_huge_pud(&vmf, orig_pud);
if (!(ret & VM_FAULT_FALLBACK))
return ret;
} else {
huge_pud_set_accessed(&vmf, orig_pud);
return 0;
}
}
}
vmf.pmd = pmd_alloc(mm, vmf.pud, address);
if (!vmf.pmd)
return VM_FAULT_OOM;
/* Huge pud page fault raced with pmd_alloc? */
if (pud_trans_unstable(vmf.pud))
goto retry_pud;
if (pmd_none(*vmf.pmd) &&
thp_vma_allowable_order(vma, vm_flags,
TVA_IN_PF | TVA_ENFORCE_SYSFS, PMD_ORDER)) {
mm,fs,dax: change ->pmd_fault to ->huge_fault Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:56:59 +00:00
ret = create_huge_pmd(&vmf);
if (!(ret & VM_FAULT_FALLBACK))
return ret;
thp: transparent hugepage core Lately I've been working to make KVM use hugepages transparently without the usual restrictions of hugetlbfs. Some of the restrictions I'd like to see removed: 1) hugepages have to be swappable or the guest physical memory remains locked in RAM and can't be paged out to swap 2) if a hugepage allocation fails, regular pages should be allocated instead and mixed in the same vma without any failure and without userland noticing 3) if some task quits and more hugepages become available in the buddy, guest physical memory backed by regular pages should be relocated on hugepages automatically in regions under madvise(MADV_HUGEPAGE) (ideally event driven by waking up the kernel deamon if the order=HPAGE_PMD_SHIFT-PAGE_SHIFT list becomes not null) 4) avoidance of reservation and maximization of use of hugepages whenever possible. Reservation (needed to avoid runtime fatal faliures) may be ok for 1 machine with 1 database with 1 database cache with 1 database cache size known at boot time. It's definitely not feasible with a virtualization hypervisor usage like RHEV-H that runs an unknown number of virtual machines with an unknown size of each virtual machine with an unknown amount of pagecache that could be potentially useful in the host for guest not using O_DIRECT (aka cache=off). hugepages in the virtualization hypervisor (and also in the guest!) are much more important than in a regular host not using virtualization, becasue with NPT/EPT they decrease the tlb-miss cacheline accesses from 24 to 19 in case only the hypervisor uses transparent hugepages, and they decrease the tlb-miss cacheline accesses from 19 to 15 in case both the linux hypervisor and the linux guest both uses this patch (though the guest will limit the addition speedup to anonymous regions only for now...). Even more important is that the tlb miss handler is much slower on a NPT/EPT guest than for a regular shadow paging or no-virtualization scenario. So maximizing the amount of virtual memory cached by the TLB pays off significantly more with NPT/EPT than without (even if there would be no significant speedup in the tlb-miss runtime). The first (and more tedious) part of this work requires allowing the VM to handle anonymous hugepages mixed with regular pages transparently on regular anonymous vmas. This is what this patch tries to achieve in the least intrusive possible way. We want hugepages and hugetlb to be used in a way so that all applications can benefit without changes (as usual we leverage the KVM virtualization design: by improving the Linux VM at large, KVM gets the performance boost too). The most important design choice is: always fallback to 4k allocation if the hugepage allocation fails! This is the _very_ opposite of some large pagecache patches that failed with -EIO back then if a 64k (or similar) allocation failed... Second important decision (to reduce the impact of the feature on the existing pagetable handling code) is that at any time we can split an hugepage into 512 regular pages and it has to be done with an operation that can't fail. This way the reliability of the swapping isn't decreased (no need to allocate memory when we are short on memory to swap) and it's trivial to plug a split_huge_page* one-liner where needed without polluting the VM. Over time we can teach mprotect, mremap and friends to handle pmd_trans_huge natively without calling split_huge_page*. The fact it can't fail isn't just for swap: if split_huge_page would return -ENOMEM (instead of the current void) we'd need to rollback the mprotect from the middle of it (ideally including undoing the split_vma) which would be a big change and in the very wrong direction (it'd likely be simpler not to call split_huge_page at all and to teach mprotect and friends to handle hugepages instead of rolling them back from the middle). In short the very value of split_huge_page is that it can't fail. The collapsing and madvise(MADV_HUGEPAGE) part will remain separated and incremental and it'll just be an "harmless" addition later if this initial part is agreed upon. It also should be noted that locking-wise replacing regular pages with hugepages is going to be very easy if compared to what I'm doing below in split_huge_page, as it will only happen when page_count(page) matches page_mapcount(page) if we can take the PG_lock and mmap_sem in write mode. collapse_huge_page will be a "best effort" that (unlike split_huge_page) can fail at the minimal sign of trouble and we can try again later. collapse_huge_page will be similar to how KSM works and the madvise(MADV_HUGEPAGE) will work similar to madvise(MADV_MERGEABLE). The default I like is that transparent hugepages are used at page fault time. This can be changed with /sys/kernel/mm/transparent_hugepage/enabled. The control knob can be set to three values "always", "madvise", "never" which mean respectively that hugepages are always used, or only inside madvise(MADV_HUGEPAGE) regions, or never used. /sys/kernel/mm/transparent_hugepage/defrag instead controls if the hugepage allocation should defrag memory aggressively "always", only inside "madvise" regions, or "never". The pmd_trans_splitting/pmd_trans_huge locking is very solid. The put_page (from get_user_page users that can't use mmu notifier like O_DIRECT) that runs against a __split_huge_page_refcount instead was a pain to serialize in a way that would result always in a coherent page count for both tail and head. I think my locking solution with a compound_lock taken only after the page_first is valid and is still a PageHead should be safe but it surely needs review from SMP race point of view. In short there is no current existing way to serialize the O_DIRECT final put_page against split_huge_page_refcount so I had to invent a new one (O_DIRECT loses knowledge on the mapping status by the time gup_fast returns so...). And I didn't want to impact all gup/gup_fast users for now, maybe if we change the gup interface substantially we can avoid this locking, I admit I didn't think too much about it because changing the gup unpinning interface would be invasive. If we ignored O_DIRECT we could stick to the existing compound refcounting code, by simply adding a get_user_pages_fast_flags(foll_flags) where KVM (and any other mmu notifier user) would call it without FOLL_GET (and if FOLL_GET isn't set we'd just BUG_ON if nobody registered itself in the current task mmu notifier list yet). But O_DIRECT is fundamental for decent performance of virtualized I/O on fast storage so we can't avoid it to solve the race of put_page against split_huge_page_refcount to achieve a complete hugepage feature for KVM. Swap and oom works fine (well just like with regular pages ;). MMU notifier is handled transparently too, with the exception of the young bit on the pmd, that didn't have a range check but I think KVM will be fine because the whole point of hugepages is that EPT/NPT will also use a huge pmd when they notice gup returns pages with PageCompound set, so they won't care of a range and there's just the pmd young bit to check in that case. NOTE: in some cases if the L2 cache is small, this may slowdown and waste memory during COWs because 4M of memory are accessed in a single fault instead of 8k (the payoff is that after COW the program can run faster). So we might want to switch the copy_huge_page (and clear_huge_page too) to not temporal stores. I also extensively researched ways to avoid this cache trashing with a full prefault logic that would cow in 8k/16k/32k/64k up to 1M (I can send those patches that fully implemented prefault) but I concluded they're not worth it and they add an huge additional complexity and they remove all tlb benefits until the full hugepage has been faulted in, to save a little bit of memory and some cache during app startup, but they still don't improve substantially the cache-trashing during startup if the prefault happens in >4k chunks. One reason is that those 4k pte entries copied are still mapped on a perfectly cache-colored hugepage, so the trashing is the worst one can generate in those copies (cow of 4k page copies aren't so well colored so they trashes less, but again this results in software running faster after the page fault). Those prefault patches allowed things like a pte where post-cow pages were local 4k regular anon pages and the not-yet-cowed pte entries were pointing in the middle of some hugepage mapped read-only. If it doesn't payoff substantially with todays hardware it will payoff even less in the future with larger l2 caches, and the prefault logic would blot the VM a lot. If one is emebdded transparent_hugepage can be disabled during boot with sysfs or with the boot commandline parameter transparent_hugepage=0 (or transparent_hugepage=2 to restrict hugepages inside madvise regions) that will ensure not a single hugepage is allocated at boot time. It is simple enough to just disable transparent hugepage globally and let transparent hugepages be allocated selectively by applications in the MADV_HUGEPAGE region (both at page fault time, and if enabled with the collapse_huge_page too through the kernel daemon). This patch supports only hugepages mapped in the pmd, archs that have smaller hugepages will not fit in this patch alone. Also some archs like power have certain tlb limits that prevents mixing different page size in the same regions so they will not fit in this framework that requires "graceful fallback" to basic PAGE_SIZE in case of physical memory fragmentation. hugetlbfs remains a perfect fit for those because its software limits happen to match the hardware limits. hugetlbfs also remains a perfect fit for hugepage sizes like 1GByte that cannot be hoped to be found not fragmented after a certain system uptime and that would be very expensive to defragment with relocation, so requiring reservation. hugetlbfs is the "reservation way", the point of transparent hugepages is not to have any reservation at all and maximizing the use of cache and hugepages at all times automatically. Some performance result: vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largep ages3 memset page fault 1566023 memset tlb miss 453854 memset second tlb miss 453321 random access tlb miss 41635 random access second tlb miss 41658 vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largepages3 memset page fault 1566471 memset tlb miss 453375 memset second tlb miss 453320 random access tlb miss 41636 random access second tlb miss 41637 vmx andrea # ./largepages3 memset page fault 1566642 memset tlb miss 453417 memset second tlb miss 453313 random access tlb miss 41630 random access second tlb miss 41647 vmx andrea # ./largepages3 memset page fault 1566872 memset tlb miss 453418 memset second tlb miss 453315 random access tlb miss 41618 random access second tlb miss 41659 vmx andrea # echo 0 > /proc/sys/vm/transparent_hugepage vmx andrea # ./largepages3 memset page fault 2182476 memset tlb miss 460305 memset second tlb miss 460179 random access tlb miss 44483 random access second tlb miss 44186 vmx andrea # ./largepages3 memset page fault 2182791 memset tlb miss 460742 memset second tlb miss 459962 random access tlb miss 43981 random access second tlb miss 43988 ============ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/time.h> #define SIZE (3UL*1024*1024*1024) int main() { char *p = malloc(SIZE), *p2; struct timeval before, after; gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset page fault %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); return 0; } ============ Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 23:46:52 +00:00
} else {
mm: use pmdp_get_lockless() without surplus barrier() Patch series "mm: allow pte_offset_map[_lock]() to fail", v2. What is it all about? Some mmap_lock avoidance i.e. latency reduction. Initially just for the case of collapsing shmem or file pages to THPs; but likely to be relied upon later in other contexts e.g. freeing of empty page tables (but that's not work I'm doing). mmap_write_lock avoidance when collapsing to anon THPs? Perhaps, but again that's not work I've done: a quick attempt was not as easy as the shmem/file case. I would much prefer not to have to make these small but wide-ranging changes for such a niche case; but failed to find another way, and have heard that shmem MADV_COLLAPSE's usefulness is being limited by that mmap_write_lock it currently requires. These changes (though of course not these exact patches) have been in Google's data centre kernel for three years now: we do rely upon them. What is this preparatory series about? The current mmap locking will not be enough to guard against that tricky transition between pmd entry pointing to page table, and empty pmd entry, and pmd entry pointing to huge page: pte_offset_map() will have to validate the pmd entry for itself, returning NULL if no page table is there. What to do about that varies: sometimes nearby error handling indicates just to skip it; but in many cases an ACTION_AGAIN or "goto again" is appropriate (and if that risks an infinite loop, then there must have been an oops, or pfn 0 mistaken for page table, before). Given the likely extension to freeing empty page tables, I have not limited this set of changes to a THP config; and it has been easier, and sets a better example, if each site is given appropriate handling: even where deeper study might prove that failure could only happen if the pmd table were corrupted. Several of the patches are, or include, cleanup on the way; and by the end, pmd_trans_unstable() and suchlike are deleted: pte_offset_map() and pte_offset_map_lock() then handle those original races and more. Most uses of pte_lockptr() are deprecated, with pte_offset_map_nolock() taking its place. This patch (of 32): Use pmdp_get_lockless() in preference to READ_ONCE(*pmdp), to get a more reliable result with PAE (or READ_ONCE as before without PAE); and remove the unnecessary extra barrier()s which got left behind in its callers. HOWEVER: Note the small print in linux/pgtable.h, where it was designed specifically for fast GUP, and depends on interrupts being disabled for its full guarantee: most callers which have been added (here and before) do NOT have interrupts disabled, so there is still some need for caution. Link: https://lkml.kernel.org/r/f35279a9-9ac0-de22-d245-591afbfb4dc@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:06:53 +00:00
vmf.orig_pmd = pmdp_get_lockless(vmf.pmd);
mm: memory: add orig_pmd to struct vm_fault Pach series "mm: thp: use generic THP migration for NUMA hinting fault", v3. When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. It is definitely a maintenance burden to keep two THP migration implementation for different code paths and it is more error prone. Using the generic THP migration implementation allows us remove the duplicate code and some hacks needed by the old ad hoc implementation. A quick grep shows x86_64, PowerPC (book3s), ARM64 ans S390 support both THP and NUMA balancing. The most of them support THP migration except for S390. Zi Yan tried to add THP migration support for S390 before but it was not accepted due to the design of S390 PMD. For the discussion, please see: https://lkml.org/lkml/2018/4/27/953. Per the discussion with Gerald Schaefer in v1 it is acceptible to skip huge PMD for S390 for now. I saw there were some hacks about gup from git history, but I didn't figure out if they have been removed or not since I just found FOLL_NUMA code in the current gup implementation and they seems useful. Patch #1 ~ #2 are preparation patches. Patch #3 is the real meat. Patch #4 ~ #6 keep consistent counters and behaviors with before. Patch #7 skips change huge PMD to prot_none if thp migration is not supported. Test ---- Did some tests to measure the latency of do_huge_pmd_numa_page. The test VM has 80 vcpus and 64G memory. The test would create 2 processes to consume 128G memory together which would incur memory pressure to cause THP splits. And it also creates 80 processes to hog cpu, and the memory consumer processes are bound to different nodes periodically in order to increase NUMA faults. The below test script is used: echo 3 > /proc/sys/vm/drop_caches # Run stress-ng for 24 hours ./stress-ng/stress-ng --vm 2 --vm-bytes 64G --timeout 24h & PID=$! ./stress-ng/stress-ng --cpu $NR_CPUS --timeout 24h & # Wait for vm stressors forked sleep 5 PID_1=`pgrep -P $PID | awk 'NR == 1'` PID_2=`pgrep -P $PID | awk 'NR == 2'` JOB1=`pgrep -P $PID_1` JOB2=`pgrep -P $PID_2` # Bind load jobs to different nodes periodically to force generate # cross node memory access while [ -d "/proc/$PID" ] do taskset -apc 8 $JOB1 taskset -apc 8 $JOB2 sleep 300 taskset -apc 58 $JOB1 taskset -apc 58 $JOB2 sleep 300 done With the above test the histogram of latency of do_huge_pmd_numa_page is as shown below. Since the number of do_huge_pmd_numa_page varies drastically for each run (should be due to scheduler), so I converted the raw number to percentage. patched base @us[stress-ng]: [0] 3.57% 0.16% [1] 55.68% 18.36% [2, 4) 10.46% 40.44% [4, 8) 7.26% 17.82% [8, 16) 21.12% 13.41% [16, 32) 1.06% 4.27% [32, 64) 0.56% 4.07% [64, 128) 0.16% 0.35% [128, 256) < 0.1% < 0.1% [256, 512) < 0.1% < 0.1% [512, 1K) < 0.1% < 0.1% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) < 0.1% < 0.1% [16K, 32K) < 0.1% < 0.1% [32K, 64K) < 0.1% < 0.1% Per the result, patched kernel is even slightly better than the base kernel. I think this is because the lock contention against THP split is less than base kernel due to the refactor. To exclude the affect from THP split, I also did test w/o memory pressure. No obvious regression is spotted. The below is the test result *w/o* memory pressure. patched base @us[stress-ng]: [0] 7.97% 18.4% [1] 69.63% 58.24% [2, 4) 4.18% 2.63% [4, 8) 0.22% 0.17% [8, 16) 1.03% 0.92% [16, 32) 0.14% < 0.1% [32, 64) < 0.1% < 0.1% [64, 128) < 0.1% < 0.1% [128, 256) < 0.1% < 0.1% [256, 512) 0.45% 1.19% [512, 1K) 15.45% 17.27% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) 0.86% 0.88% [16K, 32K) < 0.1% 0.15% [32K, 64K) < 0.1% < 0.1% [64K, 128K) < 0.1% < 0.1% [128K, 256K) < 0.1% < 0.1% The series also survived a series of tests that exercise NUMA balancing migrations by Mel. This patch (of 7): Add orig_pmd to struct vm_fault so the "orig_pmd" parameter used by huge page fault could be removed, just like its PTE counterpart does. Link: https://lkml.kernel.org/r/20210518200801.7413-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20210518200801.7413-2-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:51:35 +00:00
if (unlikely(is_swap_pmd(vmf.orig_pmd))) {
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
VM_BUG_ON(thp_migration_supported() &&
mm: memory: add orig_pmd to struct vm_fault Pach series "mm: thp: use generic THP migration for NUMA hinting fault", v3. When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. It is definitely a maintenance burden to keep two THP migration implementation for different code paths and it is more error prone. Using the generic THP migration implementation allows us remove the duplicate code and some hacks needed by the old ad hoc implementation. A quick grep shows x86_64, PowerPC (book3s), ARM64 ans S390 support both THP and NUMA balancing. The most of them support THP migration except for S390. Zi Yan tried to add THP migration support for S390 before but it was not accepted due to the design of S390 PMD. For the discussion, please see: https://lkml.org/lkml/2018/4/27/953. Per the discussion with Gerald Schaefer in v1 it is acceptible to skip huge PMD for S390 for now. I saw there were some hacks about gup from git history, but I didn't figure out if they have been removed or not since I just found FOLL_NUMA code in the current gup implementation and they seems useful. Patch #1 ~ #2 are preparation patches. Patch #3 is the real meat. Patch #4 ~ #6 keep consistent counters and behaviors with before. Patch #7 skips change huge PMD to prot_none if thp migration is not supported. Test ---- Did some tests to measure the latency of do_huge_pmd_numa_page. The test VM has 80 vcpus and 64G memory. The test would create 2 processes to consume 128G memory together which would incur memory pressure to cause THP splits. And it also creates 80 processes to hog cpu, and the memory consumer processes are bound to different nodes periodically in order to increase NUMA faults. The below test script is used: echo 3 > /proc/sys/vm/drop_caches # Run stress-ng for 24 hours ./stress-ng/stress-ng --vm 2 --vm-bytes 64G --timeout 24h & PID=$! ./stress-ng/stress-ng --cpu $NR_CPUS --timeout 24h & # Wait for vm stressors forked sleep 5 PID_1=`pgrep -P $PID | awk 'NR == 1'` PID_2=`pgrep -P $PID | awk 'NR == 2'` JOB1=`pgrep -P $PID_1` JOB2=`pgrep -P $PID_2` # Bind load jobs to different nodes periodically to force generate # cross node memory access while [ -d "/proc/$PID" ] do taskset -apc 8 $JOB1 taskset -apc 8 $JOB2 sleep 300 taskset -apc 58 $JOB1 taskset -apc 58 $JOB2 sleep 300 done With the above test the histogram of latency of do_huge_pmd_numa_page is as shown below. Since the number of do_huge_pmd_numa_page varies drastically for each run (should be due to scheduler), so I converted the raw number to percentage. patched base @us[stress-ng]: [0] 3.57% 0.16% [1] 55.68% 18.36% [2, 4) 10.46% 40.44% [4, 8) 7.26% 17.82% [8, 16) 21.12% 13.41% [16, 32) 1.06% 4.27% [32, 64) 0.56% 4.07% [64, 128) 0.16% 0.35% [128, 256) < 0.1% < 0.1% [256, 512) < 0.1% < 0.1% [512, 1K) < 0.1% < 0.1% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) < 0.1% < 0.1% [16K, 32K) < 0.1% < 0.1% [32K, 64K) < 0.1% < 0.1% Per the result, patched kernel is even slightly better than the base kernel. I think this is because the lock contention against THP split is less than base kernel due to the refactor. To exclude the affect from THP split, I also did test w/o memory pressure. No obvious regression is spotted. The below is the test result *w/o* memory pressure. patched base @us[stress-ng]: [0] 7.97% 18.4% [1] 69.63% 58.24% [2, 4) 4.18% 2.63% [4, 8) 0.22% 0.17% [8, 16) 1.03% 0.92% [16, 32) 0.14% < 0.1% [32, 64) < 0.1% < 0.1% [64, 128) < 0.1% < 0.1% [128, 256) < 0.1% < 0.1% [256, 512) 0.45% 1.19% [512, 1K) 15.45% 17.27% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) 0.86% 0.88% [16K, 32K) < 0.1% 0.15% [32K, 64K) < 0.1% < 0.1% [64K, 128K) < 0.1% < 0.1% [128K, 256K) < 0.1% < 0.1% The series also survived a series of tests that exercise NUMA balancing migrations by Mel. This patch (of 7): Add orig_pmd to struct vm_fault so the "orig_pmd" parameter used by huge page fault could be removed, just like its PTE counterpart does. Link: https://lkml.kernel.org/r/20210518200801.7413-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20210518200801.7413-2-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:51:35 +00:00
!is_pmd_migration_entry(vmf.orig_pmd));
if (is_pmd_migration_entry(vmf.orig_pmd))
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:11:01 +00:00
pmd_migration_entry_wait(mm, vmf.pmd);
return 0;
}
mm: memory: add orig_pmd to struct vm_fault Pach series "mm: thp: use generic THP migration for NUMA hinting fault", v3. When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. It is definitely a maintenance burden to keep two THP migration implementation for different code paths and it is more error prone. Using the generic THP migration implementation allows us remove the duplicate code and some hacks needed by the old ad hoc implementation. A quick grep shows x86_64, PowerPC (book3s), ARM64 ans S390 support both THP and NUMA balancing. The most of them support THP migration except for S390. Zi Yan tried to add THP migration support for S390 before but it was not accepted due to the design of S390 PMD. For the discussion, please see: https://lkml.org/lkml/2018/4/27/953. Per the discussion with Gerald Schaefer in v1 it is acceptible to skip huge PMD for S390 for now. I saw there were some hacks about gup from git history, but I didn't figure out if they have been removed or not since I just found FOLL_NUMA code in the current gup implementation and they seems useful. Patch #1 ~ #2 are preparation patches. Patch #3 is the real meat. Patch #4 ~ #6 keep consistent counters and behaviors with before. Patch #7 skips change huge PMD to prot_none if thp migration is not supported. Test ---- Did some tests to measure the latency of do_huge_pmd_numa_page. The test VM has 80 vcpus and 64G memory. The test would create 2 processes to consume 128G memory together which would incur memory pressure to cause THP splits. And it also creates 80 processes to hog cpu, and the memory consumer processes are bound to different nodes periodically in order to increase NUMA faults. The below test script is used: echo 3 > /proc/sys/vm/drop_caches # Run stress-ng for 24 hours ./stress-ng/stress-ng --vm 2 --vm-bytes 64G --timeout 24h & PID=$! ./stress-ng/stress-ng --cpu $NR_CPUS --timeout 24h & # Wait for vm stressors forked sleep 5 PID_1=`pgrep -P $PID | awk 'NR == 1'` PID_2=`pgrep -P $PID | awk 'NR == 2'` JOB1=`pgrep -P $PID_1` JOB2=`pgrep -P $PID_2` # Bind load jobs to different nodes periodically to force generate # cross node memory access while [ -d "/proc/$PID" ] do taskset -apc 8 $JOB1 taskset -apc 8 $JOB2 sleep 300 taskset -apc 58 $JOB1 taskset -apc 58 $JOB2 sleep 300 done With the above test the histogram of latency of do_huge_pmd_numa_page is as shown below. Since the number of do_huge_pmd_numa_page varies drastically for each run (should be due to scheduler), so I converted the raw number to percentage. patched base @us[stress-ng]: [0] 3.57% 0.16% [1] 55.68% 18.36% [2, 4) 10.46% 40.44% [4, 8) 7.26% 17.82% [8, 16) 21.12% 13.41% [16, 32) 1.06% 4.27% [32, 64) 0.56% 4.07% [64, 128) 0.16% 0.35% [128, 256) < 0.1% < 0.1% [256, 512) < 0.1% < 0.1% [512, 1K) < 0.1% < 0.1% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) < 0.1% < 0.1% [16K, 32K) < 0.1% < 0.1% [32K, 64K) < 0.1% < 0.1% Per the result, patched kernel is even slightly better than the base kernel. I think this is because the lock contention against THP split is less than base kernel due to the refactor. To exclude the affect from THP split, I also did test w/o memory pressure. No obvious regression is spotted. The below is the test result *w/o* memory pressure. patched base @us[stress-ng]: [0] 7.97% 18.4% [1] 69.63% 58.24% [2, 4) 4.18% 2.63% [4, 8) 0.22% 0.17% [8, 16) 1.03% 0.92% [16, 32) 0.14% < 0.1% [32, 64) < 0.1% < 0.1% [64, 128) < 0.1% < 0.1% [128, 256) < 0.1% < 0.1% [256, 512) 0.45% 1.19% [512, 1K) 15.45% 17.27% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) 0.86% 0.88% [16K, 32K) < 0.1% 0.15% [32K, 64K) < 0.1% < 0.1% [64K, 128K) < 0.1% < 0.1% [128K, 256K) < 0.1% < 0.1% The series also survived a series of tests that exercise NUMA balancing migrations by Mel. This patch (of 7): Add orig_pmd to struct vm_fault so the "orig_pmd" parameter used by huge page fault could be removed, just like its PTE counterpart does. Link: https://lkml.kernel.org/r/20210518200801.7413-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20210518200801.7413-2-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:51:35 +00:00
if (pmd_trans_huge(vmf.orig_pmd) || pmd_devmap(vmf.orig_pmd)) {
if (pmd_protnone(vmf.orig_pmd) && vma_is_accessible(vma))
return do_huge_pmd_numa_page(&vmf);
mm: support GUP-triggered unsharing of anonymous pages Whenever GUP currently ends up taking a R/O pin on an anonymous page that might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault on the page table entry will end up replacing the mapped anonymous page due to COW, resulting in the GUP pin no longer being consistent with the page actually mapped into the page table. The possible ways to deal with this situation are: (1) Ignore and pin -- what we do right now. (2) Fail to pin -- which would be rather surprising to callers and could break user space. (3) Trigger unsharing and pin the now exclusive page -- reliable R/O pins. We want to implement 3) because it provides the clearest semantics and allows for checking in unpin_user_pages() and friends for possible BUGs: when trying to unpin a page that's no longer exclusive, clearly something went very wrong and might result in memory corruptions that might be hard to debug. So we better have a nice way to spot such issues. To implement 3), we need a way for GUP to trigger unsharing: FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped anonymous pages and resembles COW logic during a write fault. However, in contrast to a write fault, GUP-triggered unsharing will, for example, still maintain the write protection. Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write fault handlers for all applicable anonymous page types: ordinary pages, THP and hugetlb. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been marked exclusive in the meantime by someone else, there is nothing to do. * If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not marked exclusive, it will try detecting if the process is the exclusive owner. If exclusive, it can be set exclusive similar to reuse logic during write faults via page_move_anon_rmap() and there is nothing else to do; otherwise, we either have to copy and map a fresh, anonymous exclusive page R/O (ordinary pages, hugetlb), or split the THP. This commit is heavily based on patches by Andrea. Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Co-developed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
if ((flags & (FAULT_FLAG_WRITE|FAULT_FLAG_UNSHARE)) &&
!pmd_write(vmf.orig_pmd)) {
mm: memory: add orig_pmd to struct vm_fault Pach series "mm: thp: use generic THP migration for NUMA hinting fault", v3. When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. It is definitely a maintenance burden to keep two THP migration implementation for different code paths and it is more error prone. Using the generic THP migration implementation allows us remove the duplicate code and some hacks needed by the old ad hoc implementation. A quick grep shows x86_64, PowerPC (book3s), ARM64 ans S390 support both THP and NUMA balancing. The most of them support THP migration except for S390. Zi Yan tried to add THP migration support for S390 before but it was not accepted due to the design of S390 PMD. For the discussion, please see: https://lkml.org/lkml/2018/4/27/953. Per the discussion with Gerald Schaefer in v1 it is acceptible to skip huge PMD for S390 for now. I saw there were some hacks about gup from git history, but I didn't figure out if they have been removed or not since I just found FOLL_NUMA code in the current gup implementation and they seems useful. Patch #1 ~ #2 are preparation patches. Patch #3 is the real meat. Patch #4 ~ #6 keep consistent counters and behaviors with before. Patch #7 skips change huge PMD to prot_none if thp migration is not supported. Test ---- Did some tests to measure the latency of do_huge_pmd_numa_page. The test VM has 80 vcpus and 64G memory. The test would create 2 processes to consume 128G memory together which would incur memory pressure to cause THP splits. And it also creates 80 processes to hog cpu, and the memory consumer processes are bound to different nodes periodically in order to increase NUMA faults. The below test script is used: echo 3 > /proc/sys/vm/drop_caches # Run stress-ng for 24 hours ./stress-ng/stress-ng --vm 2 --vm-bytes 64G --timeout 24h & PID=$! ./stress-ng/stress-ng --cpu $NR_CPUS --timeout 24h & # Wait for vm stressors forked sleep 5 PID_1=`pgrep -P $PID | awk 'NR == 1'` PID_2=`pgrep -P $PID | awk 'NR == 2'` JOB1=`pgrep -P $PID_1` JOB2=`pgrep -P $PID_2` # Bind load jobs to different nodes periodically to force generate # cross node memory access while [ -d "/proc/$PID" ] do taskset -apc 8 $JOB1 taskset -apc 8 $JOB2 sleep 300 taskset -apc 58 $JOB1 taskset -apc 58 $JOB2 sleep 300 done With the above test the histogram of latency of do_huge_pmd_numa_page is as shown below. Since the number of do_huge_pmd_numa_page varies drastically for each run (should be due to scheduler), so I converted the raw number to percentage. patched base @us[stress-ng]: [0] 3.57% 0.16% [1] 55.68% 18.36% [2, 4) 10.46% 40.44% [4, 8) 7.26% 17.82% [8, 16) 21.12% 13.41% [16, 32) 1.06% 4.27% [32, 64) 0.56% 4.07% [64, 128) 0.16% 0.35% [128, 256) < 0.1% < 0.1% [256, 512) < 0.1% < 0.1% [512, 1K) < 0.1% < 0.1% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) < 0.1% < 0.1% [16K, 32K) < 0.1% < 0.1% [32K, 64K) < 0.1% < 0.1% Per the result, patched kernel is even slightly better than the base kernel. I think this is because the lock contention against THP split is less than base kernel due to the refactor. To exclude the affect from THP split, I also did test w/o memory pressure. No obvious regression is spotted. The below is the test result *w/o* memory pressure. patched base @us[stress-ng]: [0] 7.97% 18.4% [1] 69.63% 58.24% [2, 4) 4.18% 2.63% [4, 8) 0.22% 0.17% [8, 16) 1.03% 0.92% [16, 32) 0.14% < 0.1% [32, 64) < 0.1% < 0.1% [64, 128) < 0.1% < 0.1% [128, 256) < 0.1% < 0.1% [256, 512) 0.45% 1.19% [512, 1K) 15.45% 17.27% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) 0.86% 0.88% [16K, 32K) < 0.1% 0.15% [32K, 64K) < 0.1% < 0.1% [64K, 128K) < 0.1% < 0.1% [128K, 256K) < 0.1% < 0.1% The series also survived a series of tests that exercise NUMA balancing migrations by Mel. This patch (of 7): Add orig_pmd to struct vm_fault so the "orig_pmd" parameter used by huge page fault could be removed, just like its PTE counterpart does. Link: https://lkml.kernel.org/r/20210518200801.7413-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20210518200801.7413-2-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:51:35 +00:00
ret = wp_huge_pmd(&vmf);
if (!(ret & VM_FAULT_FALLBACK))
return ret;
} else {
mm: memory: add orig_pmd to struct vm_fault Pach series "mm: thp: use generic THP migration for NUMA hinting fault", v3. When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. It is definitely a maintenance burden to keep two THP migration implementation for different code paths and it is more error prone. Using the generic THP migration implementation allows us remove the duplicate code and some hacks needed by the old ad hoc implementation. A quick grep shows x86_64, PowerPC (book3s), ARM64 ans S390 support both THP and NUMA balancing. The most of them support THP migration except for S390. Zi Yan tried to add THP migration support for S390 before but it was not accepted due to the design of S390 PMD. For the discussion, please see: https://lkml.org/lkml/2018/4/27/953. Per the discussion with Gerald Schaefer in v1 it is acceptible to skip huge PMD for S390 for now. I saw there were some hacks about gup from git history, but I didn't figure out if they have been removed or not since I just found FOLL_NUMA code in the current gup implementation and they seems useful. Patch #1 ~ #2 are preparation patches. Patch #3 is the real meat. Patch #4 ~ #6 keep consistent counters and behaviors with before. Patch #7 skips change huge PMD to prot_none if thp migration is not supported. Test ---- Did some tests to measure the latency of do_huge_pmd_numa_page. The test VM has 80 vcpus and 64G memory. The test would create 2 processes to consume 128G memory together which would incur memory pressure to cause THP splits. And it also creates 80 processes to hog cpu, and the memory consumer processes are bound to different nodes periodically in order to increase NUMA faults. The below test script is used: echo 3 > /proc/sys/vm/drop_caches # Run stress-ng for 24 hours ./stress-ng/stress-ng --vm 2 --vm-bytes 64G --timeout 24h & PID=$! ./stress-ng/stress-ng --cpu $NR_CPUS --timeout 24h & # Wait for vm stressors forked sleep 5 PID_1=`pgrep -P $PID | awk 'NR == 1'` PID_2=`pgrep -P $PID | awk 'NR == 2'` JOB1=`pgrep -P $PID_1` JOB2=`pgrep -P $PID_2` # Bind load jobs to different nodes periodically to force generate # cross node memory access while [ -d "/proc/$PID" ] do taskset -apc 8 $JOB1 taskset -apc 8 $JOB2 sleep 300 taskset -apc 58 $JOB1 taskset -apc 58 $JOB2 sleep 300 done With the above test the histogram of latency of do_huge_pmd_numa_page is as shown below. Since the number of do_huge_pmd_numa_page varies drastically for each run (should be due to scheduler), so I converted the raw number to percentage. patched base @us[stress-ng]: [0] 3.57% 0.16% [1] 55.68% 18.36% [2, 4) 10.46% 40.44% [4, 8) 7.26% 17.82% [8, 16) 21.12% 13.41% [16, 32) 1.06% 4.27% [32, 64) 0.56% 4.07% [64, 128) 0.16% 0.35% [128, 256) < 0.1% < 0.1% [256, 512) < 0.1% < 0.1% [512, 1K) < 0.1% < 0.1% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) < 0.1% < 0.1% [16K, 32K) < 0.1% < 0.1% [32K, 64K) < 0.1% < 0.1% Per the result, patched kernel is even slightly better than the base kernel. I think this is because the lock contention against THP split is less than base kernel due to the refactor. To exclude the affect from THP split, I also did test w/o memory pressure. No obvious regression is spotted. The below is the test result *w/o* memory pressure. patched base @us[stress-ng]: [0] 7.97% 18.4% [1] 69.63% 58.24% [2, 4) 4.18% 2.63% [4, 8) 0.22% 0.17% [8, 16) 1.03% 0.92% [16, 32) 0.14% < 0.1% [32, 64) < 0.1% < 0.1% [64, 128) < 0.1% < 0.1% [128, 256) < 0.1% < 0.1% [256, 512) 0.45% 1.19% [512, 1K) 15.45% 17.27% [1K, 2K) < 0.1% < 0.1% [2K, 4K) < 0.1% < 0.1% [4K, 8K) < 0.1% < 0.1% [8K, 16K) 0.86% 0.88% [16K, 32K) < 0.1% 0.15% [32K, 64K) < 0.1% < 0.1% [64K, 128K) < 0.1% < 0.1% [128K, 256K) < 0.1% < 0.1% The series also survived a series of tests that exercise NUMA balancing migrations by Mel. This patch (of 7): Add orig_pmd to struct vm_fault so the "orig_pmd" parameter used by huge page fault could be removed, just like its PTE counterpart does. Link: https://lkml.kernel.org/r/20210518200801.7413-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20210518200801.7413-2-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:51:35 +00:00
huge_pmd_set_accessed(&vmf);
return 0;
}
thp: transparent hugepage core Lately I've been working to make KVM use hugepages transparently without the usual restrictions of hugetlbfs. Some of the restrictions I'd like to see removed: 1) hugepages have to be swappable or the guest physical memory remains locked in RAM and can't be paged out to swap 2) if a hugepage allocation fails, regular pages should be allocated instead and mixed in the same vma without any failure and without userland noticing 3) if some task quits and more hugepages become available in the buddy, guest physical memory backed by regular pages should be relocated on hugepages automatically in regions under madvise(MADV_HUGEPAGE) (ideally event driven by waking up the kernel deamon if the order=HPAGE_PMD_SHIFT-PAGE_SHIFT list becomes not null) 4) avoidance of reservation and maximization of use of hugepages whenever possible. Reservation (needed to avoid runtime fatal faliures) may be ok for 1 machine with 1 database with 1 database cache with 1 database cache size known at boot time. It's definitely not feasible with a virtualization hypervisor usage like RHEV-H that runs an unknown number of virtual machines with an unknown size of each virtual machine with an unknown amount of pagecache that could be potentially useful in the host for guest not using O_DIRECT (aka cache=off). hugepages in the virtualization hypervisor (and also in the guest!) are much more important than in a regular host not using virtualization, becasue with NPT/EPT they decrease the tlb-miss cacheline accesses from 24 to 19 in case only the hypervisor uses transparent hugepages, and they decrease the tlb-miss cacheline accesses from 19 to 15 in case both the linux hypervisor and the linux guest both uses this patch (though the guest will limit the addition speedup to anonymous regions only for now...). Even more important is that the tlb miss handler is much slower on a NPT/EPT guest than for a regular shadow paging or no-virtualization scenario. So maximizing the amount of virtual memory cached by the TLB pays off significantly more with NPT/EPT than without (even if there would be no significant speedup in the tlb-miss runtime). The first (and more tedious) part of this work requires allowing the VM to handle anonymous hugepages mixed with regular pages transparently on regular anonymous vmas. This is what this patch tries to achieve in the least intrusive possible way. We want hugepages and hugetlb to be used in a way so that all applications can benefit without changes (as usual we leverage the KVM virtualization design: by improving the Linux VM at large, KVM gets the performance boost too). The most important design choice is: always fallback to 4k allocation if the hugepage allocation fails! This is the _very_ opposite of some large pagecache patches that failed with -EIO back then if a 64k (or similar) allocation failed... Second important decision (to reduce the impact of the feature on the existing pagetable handling code) is that at any time we can split an hugepage into 512 regular pages and it has to be done with an operation that can't fail. This way the reliability of the swapping isn't decreased (no need to allocate memory when we are short on memory to swap) and it's trivial to plug a split_huge_page* one-liner where needed without polluting the VM. Over time we can teach mprotect, mremap and friends to handle pmd_trans_huge natively without calling split_huge_page*. The fact it can't fail isn't just for swap: if split_huge_page would return -ENOMEM (instead of the current void) we'd need to rollback the mprotect from the middle of it (ideally including undoing the split_vma) which would be a big change and in the very wrong direction (it'd likely be simpler not to call split_huge_page at all and to teach mprotect and friends to handle hugepages instead of rolling them back from the middle). In short the very value of split_huge_page is that it can't fail. The collapsing and madvise(MADV_HUGEPAGE) part will remain separated and incremental and it'll just be an "harmless" addition later if this initial part is agreed upon. It also should be noted that locking-wise replacing regular pages with hugepages is going to be very easy if compared to what I'm doing below in split_huge_page, as it will only happen when page_count(page) matches page_mapcount(page) if we can take the PG_lock and mmap_sem in write mode. collapse_huge_page will be a "best effort" that (unlike split_huge_page) can fail at the minimal sign of trouble and we can try again later. collapse_huge_page will be similar to how KSM works and the madvise(MADV_HUGEPAGE) will work similar to madvise(MADV_MERGEABLE). The default I like is that transparent hugepages are used at page fault time. This can be changed with /sys/kernel/mm/transparent_hugepage/enabled. The control knob can be set to three values "always", "madvise", "never" which mean respectively that hugepages are always used, or only inside madvise(MADV_HUGEPAGE) regions, or never used. /sys/kernel/mm/transparent_hugepage/defrag instead controls if the hugepage allocation should defrag memory aggressively "always", only inside "madvise" regions, or "never". The pmd_trans_splitting/pmd_trans_huge locking is very solid. The put_page (from get_user_page users that can't use mmu notifier like O_DIRECT) that runs against a __split_huge_page_refcount instead was a pain to serialize in a way that would result always in a coherent page count for both tail and head. I think my locking solution with a compound_lock taken only after the page_first is valid and is still a PageHead should be safe but it surely needs review from SMP race point of view. In short there is no current existing way to serialize the O_DIRECT final put_page against split_huge_page_refcount so I had to invent a new one (O_DIRECT loses knowledge on the mapping status by the time gup_fast returns so...). And I didn't want to impact all gup/gup_fast users for now, maybe if we change the gup interface substantially we can avoid this locking, I admit I didn't think too much about it because changing the gup unpinning interface would be invasive. If we ignored O_DIRECT we could stick to the existing compound refcounting code, by simply adding a get_user_pages_fast_flags(foll_flags) where KVM (and any other mmu notifier user) would call it without FOLL_GET (and if FOLL_GET isn't set we'd just BUG_ON if nobody registered itself in the current task mmu notifier list yet). But O_DIRECT is fundamental for decent performance of virtualized I/O on fast storage so we can't avoid it to solve the race of put_page against split_huge_page_refcount to achieve a complete hugepage feature for KVM. Swap and oom works fine (well just like with regular pages ;). MMU notifier is handled transparently too, with the exception of the young bit on the pmd, that didn't have a range check but I think KVM will be fine because the whole point of hugepages is that EPT/NPT will also use a huge pmd when they notice gup returns pages with PageCompound set, so they won't care of a range and there's just the pmd young bit to check in that case. NOTE: in some cases if the L2 cache is small, this may slowdown and waste memory during COWs because 4M of memory are accessed in a single fault instead of 8k (the payoff is that after COW the program can run faster). So we might want to switch the copy_huge_page (and clear_huge_page too) to not temporal stores. I also extensively researched ways to avoid this cache trashing with a full prefault logic that would cow in 8k/16k/32k/64k up to 1M (I can send those patches that fully implemented prefault) but I concluded they're not worth it and they add an huge additional complexity and they remove all tlb benefits until the full hugepage has been faulted in, to save a little bit of memory and some cache during app startup, but they still don't improve substantially the cache-trashing during startup if the prefault happens in >4k chunks. One reason is that those 4k pte entries copied are still mapped on a perfectly cache-colored hugepage, so the trashing is the worst one can generate in those copies (cow of 4k page copies aren't so well colored so they trashes less, but again this results in software running faster after the page fault). Those prefault patches allowed things like a pte where post-cow pages were local 4k regular anon pages and the not-yet-cowed pte entries were pointing in the middle of some hugepage mapped read-only. If it doesn't payoff substantially with todays hardware it will payoff even less in the future with larger l2 caches, and the prefault logic would blot the VM a lot. If one is emebdded transparent_hugepage can be disabled during boot with sysfs or with the boot commandline parameter transparent_hugepage=0 (or transparent_hugepage=2 to restrict hugepages inside madvise regions) that will ensure not a single hugepage is allocated at boot time. It is simple enough to just disable transparent hugepage globally and let transparent hugepages be allocated selectively by applications in the MADV_HUGEPAGE region (both at page fault time, and if enabled with the collapse_huge_page too through the kernel daemon). This patch supports only hugepages mapped in the pmd, archs that have smaller hugepages will not fit in this patch alone. Also some archs like power have certain tlb limits that prevents mixing different page size in the same regions so they will not fit in this framework that requires "graceful fallback" to basic PAGE_SIZE in case of physical memory fragmentation. hugetlbfs remains a perfect fit for those because its software limits happen to match the hardware limits. hugetlbfs also remains a perfect fit for hugepage sizes like 1GByte that cannot be hoped to be found not fragmented after a certain system uptime and that would be very expensive to defragment with relocation, so requiring reservation. hugetlbfs is the "reservation way", the point of transparent hugepages is not to have any reservation at all and maximizing the use of cache and hugepages at all times automatically. Some performance result: vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largep ages3 memset page fault 1566023 memset tlb miss 453854 memset second tlb miss 453321 random access tlb miss 41635 random access second tlb miss 41658 vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largepages3 memset page fault 1566471 memset tlb miss 453375 memset second tlb miss 453320 random access tlb miss 41636 random access second tlb miss 41637 vmx andrea # ./largepages3 memset page fault 1566642 memset tlb miss 453417 memset second tlb miss 453313 random access tlb miss 41630 random access second tlb miss 41647 vmx andrea # ./largepages3 memset page fault 1566872 memset tlb miss 453418 memset second tlb miss 453315 random access tlb miss 41618 random access second tlb miss 41659 vmx andrea # echo 0 > /proc/sys/vm/transparent_hugepage vmx andrea # ./largepages3 memset page fault 2182476 memset tlb miss 460305 memset second tlb miss 460179 random access tlb miss 44483 random access second tlb miss 44186 vmx andrea # ./largepages3 memset page fault 2182791 memset tlb miss 460742 memset second tlb miss 459962 random access tlb miss 43981 random access second tlb miss 43988 ============ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/time.h> #define SIZE (3UL*1024*1024*1024) int main() { char *p = malloc(SIZE), *p2; struct timeval before, after; gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset page fault %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); return 0; } ============ Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 23:46:52 +00:00
}
}
return handle_pte_fault(&vmf);
}
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
/**
* mm_account_fault - Do page fault accounting
* @mm: mm from which memcg should be extracted. It can be NULL.
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
* @regs: the pt_regs struct pointer. When set to NULL, will skip accounting
* of perf event counters, but we'll still do the per-task accounting to
* the task who triggered this page fault.
* @address: the faulted address.
* @flags: the fault flags.
* @ret: the fault retcode.
*
* This will take care of most of the page fault accounting. Meanwhile, it
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
* will also include the PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN] perf counter
* updates. However, note that the handling of PERF_COUNT_SW_PAGE_FAULTS should
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
* still be in per-arch page fault handlers at the entry of page fault.
*/
static inline void mm_account_fault(struct mm_struct *mm, struct pt_regs *regs,
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
unsigned long address, unsigned int flags,
vm_fault_t ret)
{
bool major;
/* Incomplete faults will be accounted upon completion. */
if (ret & VM_FAULT_RETRY)
return;
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
/*
* To preserve the behavior of older kernels, PGFAULT counters record
* both successful and failed faults, as opposed to perf counters,
* which ignore failed cases.
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
*/
count_vm_event(PGFAULT);
count_memcg_event_mm(mm, PGFAULT);
/*
* Do not account for unsuccessful faults (e.g. when the address wasn't
* valid). That includes arch_vma_access_permitted() failing before
* reaching here. So this is not a "this many hardware page faults"
* counter. We should use the hw profiling for that.
*/
if (ret & VM_FAULT_ERROR)
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
return;
/*
* We define the fault as a major fault when the final successful fault
* is VM_FAULT_MAJOR, or if it retried (which implies that we couldn't
* handle it immediately previously).
*/
major = (ret & VM_FAULT_MAJOR) || (flags & FAULT_FLAG_TRIED);
mm: clean up the last pieces of page fault accountings Here're the last pieces of page fault accounting that were still done outside handle_mm_fault() where we still have regs==NULL when calling handle_mm_fault(): arch/powerpc/mm/copro_fault.c: copro_handle_mm_fault arch/sparc/mm/fault_32.c: force_user_fault arch/um/kernel/trap.c: handle_page_fault mm/gup.c: faultin_page fixup_user_fault mm/hmm.c: hmm_vma_fault mm/ksm.c: break_ksm Some of them has the issue of duplicated accounting for page fault retries. Some of them didn't do the accounting at all. This patch cleans all these up by letting handle_mm_fault() to do per-task page fault accounting even if regs==NULL (though we'll still skip the perf event accountings). With that, we can safely remove all the outliers now. There's another functional change in that now we account the page faults to the caller of gup, rather than the task_struct that passed into the gup code. More information of this can be found at [1]. After this patch, below things should never be touched again outside handle_mm_fault(): - task_struct.[maj|min]_flt - PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN] [1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/ Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-25-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:38:57 +00:00
if (major)
current->maj_flt++;
else
current->min_flt++;
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
/*
mm: clean up the last pieces of page fault accountings Here're the last pieces of page fault accounting that were still done outside handle_mm_fault() where we still have regs==NULL when calling handle_mm_fault(): arch/powerpc/mm/copro_fault.c: copro_handle_mm_fault arch/sparc/mm/fault_32.c: force_user_fault arch/um/kernel/trap.c: handle_page_fault mm/gup.c: faultin_page fixup_user_fault mm/hmm.c: hmm_vma_fault mm/ksm.c: break_ksm Some of them has the issue of duplicated accounting for page fault retries. Some of them didn't do the accounting at all. This patch cleans all these up by letting handle_mm_fault() to do per-task page fault accounting even if regs==NULL (though we'll still skip the perf event accountings). With that, we can safely remove all the outliers now. There's another functional change in that now we account the page faults to the caller of gup, rather than the task_struct that passed into the gup code. More information of this can be found at [1]. After this patch, below things should never be touched again outside handle_mm_fault(): - task_struct.[maj|min]_flt - PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN] [1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/ Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-25-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:38:57 +00:00
* If the fault is done for GUP, regs will be NULL. We only do the
* accounting for the per thread fault counters who triggered the
* fault, and we skip the perf event updates.
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
*/
if (!regs)
return;
mm: clean up the last pieces of page fault accountings Here're the last pieces of page fault accounting that were still done outside handle_mm_fault() where we still have regs==NULL when calling handle_mm_fault(): arch/powerpc/mm/copro_fault.c: copro_handle_mm_fault arch/sparc/mm/fault_32.c: force_user_fault arch/um/kernel/trap.c: handle_page_fault mm/gup.c: faultin_page fixup_user_fault mm/hmm.c: hmm_vma_fault mm/ksm.c: break_ksm Some of them has the issue of duplicated accounting for page fault retries. Some of them didn't do the accounting at all. This patch cleans all these up by letting handle_mm_fault() to do per-task page fault accounting even if regs==NULL (though we'll still skip the perf event accountings). With that, we can safely remove all the outliers now. There's another functional change in that now we account the page faults to the caller of gup, rather than the task_struct that passed into the gup code. More information of this can be found at [1]. After this patch, below things should never be touched again outside handle_mm_fault(): - task_struct.[maj|min]_flt - PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN] [1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/ Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-25-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:38:57 +00:00
if (major)
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
mm: clean up the last pieces of page fault accountings Here're the last pieces of page fault accounting that were still done outside handle_mm_fault() where we still have regs==NULL when calling handle_mm_fault(): arch/powerpc/mm/copro_fault.c: copro_handle_mm_fault arch/sparc/mm/fault_32.c: force_user_fault arch/um/kernel/trap.c: handle_page_fault mm/gup.c: faultin_page fixup_user_fault mm/hmm.c: hmm_vma_fault mm/ksm.c: break_ksm Some of them has the issue of duplicated accounting for page fault retries. Some of them didn't do the accounting at all. This patch cleans all these up by letting handle_mm_fault() to do per-task page fault accounting even if regs==NULL (though we'll still skip the perf event accountings). With that, we can safely remove all the outliers now. There's another functional change in that now we account the page faults to the caller of gup, rather than the task_struct that passed into the gup code. More information of this can be found at [1]. After this patch, below things should never be touched again outside handle_mm_fault(): - task_struct.[maj|min]_flt - PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN] [1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/ Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-25-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:38:57 +00:00
else
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
}
mm: multi-gen LRU: groundwork Evictable pages are divided into multiple generations for each lruvec. The youngest generation number is stored in lrugen->max_seq for both anon and file types as they are aged on an equal footing. The oldest generation numbers are stored in lrugen->min_seq[] separately for anon and file types as clean file pages can be evicted regardless of swap constraints. These three variables are monotonically increasing. Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits in order to fit into the gen counter in folio->flags. Each truncated generation number is an index to lrugen->lists[]. The sliding window technique is used to track at least MIN_NR_GENS and at most MAX_NR_GENS generations. The gen counter stores a value within [1, MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it stores 0. There are two conceptually independent procedures: "the aging", which produces young generations, and "the eviction", which consumes old generations. They form a closed-loop system, i.e., "the page reclaim". Both procedures can be invoked from userspace for the purposes of working set estimation and proactive reclaim. These techniques are commonly used to optimize job scheduling (bin packing) in data centers [1][2]. To avoid confusion, the terms "hot" and "cold" will be applied to the multi-gen LRU, as a new convention; the terms "active" and "inactive" will be applied to the active/inactive LRU, as usual. The protection of hot pages and the selection of cold pages are based on page access channels and patterns. There are two access channels: one through page tables and the other through file descriptors. The protection of the former channel is by design stronger because: 1. The uncertainty in determining the access patterns of the former channel is higher due to the approximation of the accessed bit. 2. The cost of evicting the former channel is higher due to the TLB flushes required and the likelihood of encountering the dirty bit. 3. The penalty of underprotecting the former channel is higher because applications usually do not prepare themselves for major page faults like they do for blocked I/O. E.g., GUI applications commonly use dedicated I/O threads to avoid blocking rendering threads. There are also two access patterns: one with temporal locality and the other without. For the reasons listed above, the former channel is assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is present; the latter channel is assumed to follow the latter pattern unless outlying refaults have been observed [3][4]. The next patch will address the "outlying refaults". Three macros, i.e., LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in this patch to make the entire patchset less diffy. A page is added to the youngest generation on faulting. The aging needs to check the accessed bit at least twice before handing this page over to the eviction. The first check takes care of the accessed bit set on the initial fault; the second check makes sure this page has not been used since then. This protocol, AKA second chance, requires a minimum of two generations, hence MIN_NR_GENS. [1] https://dl.acm.org/doi/10.1145/3297858.3304053 [2] https://dl.acm.org/doi/10.1145/3503222.3507731 [3] https://lwn.net/Articles/495543/ [4] https://lwn.net/Articles/815342/ Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Barry Song <baohua@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 08:00:02 +00:00
#ifdef CONFIG_LRU_GEN
static void lru_gen_enter_fault(struct vm_area_struct *vma)
{
mm: add vma_has_recency() Add vma_has_recency() to indicate whether a VMA may exhibit temporal locality that the LRU algorithm relies on. This function returns false for VMAs marked by VM_SEQ_READ or VM_RAND_READ. While the former flag indicates linear access, i.e., a special case of spatial locality, both flags indicate a lack of temporal locality, i.e., the reuse of an area within a relatively small duration. "Recency" is chosen over "locality" to avoid confusion between temporal and spatial localities. Before this patch, the active/inactive LRU only ignored the accessed bit from VMAs marked by VM_SEQ_READ. After this patch, the active/inactive LRU and MGLRU share the same logic: they both ignore the accessed bit if vma_has_recency() returns false. For the active/inactive LRU, the following fio test showed a [6, 8]% increase in IOPS when randomly accessing mapped files under memory pressure. kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo) kb=$((kb - 8*1024*1024)) modprobe brd rd_nr=1 rd_size=$kb dd if=/dev/zero of=/dev/ram0 bs=1M mkfs.ext4 /dev/ram0 mount /dev/ram0 /mnt/ swapoff -a fio --name=test --directory=/mnt/ --ioengine=mmap --numjobs=8 \ --size=8G --rw=randrw --time_based --runtime=10m \ --group_reporting The discussion that led to this patch is here [1]. Additional test results are available in that thread. [1] https://lore.kernel.org/r/Y31s%2FK8T85jh05wH@google.com/ Link: https://lkml.kernel.org/r/20221230215252.2628425-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Righi <andrea.righi@canonical.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michael Larabel <Michael@MichaelLarabel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-30 21:52:51 +00:00
/* the LRU algorithm only applies to accesses with recency */
current->in_lru_fault = vma_has_recency(vma);
mm: multi-gen LRU: groundwork Evictable pages are divided into multiple generations for each lruvec. The youngest generation number is stored in lrugen->max_seq for both anon and file types as they are aged on an equal footing. The oldest generation numbers are stored in lrugen->min_seq[] separately for anon and file types as clean file pages can be evicted regardless of swap constraints. These three variables are monotonically increasing. Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits in order to fit into the gen counter in folio->flags. Each truncated generation number is an index to lrugen->lists[]. The sliding window technique is used to track at least MIN_NR_GENS and at most MAX_NR_GENS generations. The gen counter stores a value within [1, MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it stores 0. There are two conceptually independent procedures: "the aging", which produces young generations, and "the eviction", which consumes old generations. They form a closed-loop system, i.e., "the page reclaim". Both procedures can be invoked from userspace for the purposes of working set estimation and proactive reclaim. These techniques are commonly used to optimize job scheduling (bin packing) in data centers [1][2]. To avoid confusion, the terms "hot" and "cold" will be applied to the multi-gen LRU, as a new convention; the terms "active" and "inactive" will be applied to the active/inactive LRU, as usual. The protection of hot pages and the selection of cold pages are based on page access channels and patterns. There are two access channels: one through page tables and the other through file descriptors. The protection of the former channel is by design stronger because: 1. The uncertainty in determining the access patterns of the former channel is higher due to the approximation of the accessed bit. 2. The cost of evicting the former channel is higher due to the TLB flushes required and the likelihood of encountering the dirty bit. 3. The penalty of underprotecting the former channel is higher because applications usually do not prepare themselves for major page faults like they do for blocked I/O. E.g., GUI applications commonly use dedicated I/O threads to avoid blocking rendering threads. There are also two access patterns: one with temporal locality and the other without. For the reasons listed above, the former channel is assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is present; the latter channel is assumed to follow the latter pattern unless outlying refaults have been observed [3][4]. The next patch will address the "outlying refaults". Three macros, i.e., LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in this patch to make the entire patchset less diffy. A page is added to the youngest generation on faulting. The aging needs to check the accessed bit at least twice before handing this page over to the eviction. The first check takes care of the accessed bit set on the initial fault; the second check makes sure this page has not been used since then. This protocol, AKA second chance, requires a minimum of two generations, hence MIN_NR_GENS. [1] https://dl.acm.org/doi/10.1145/3297858.3304053 [2] https://dl.acm.org/doi/10.1145/3503222.3507731 [3] https://lwn.net/Articles/495543/ [4] https://lwn.net/Articles/815342/ Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Barry Song <baohua@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 08:00:02 +00:00
}
static void lru_gen_exit_fault(void)
{
current->in_lru_fault = false;
}
#else
static void lru_gen_enter_fault(struct vm_area_struct *vma)
{
}
static void lru_gen_exit_fault(void)
{
}
#endif /* CONFIG_LRU_GEN */
static vm_fault_t sanitize_fault_flags(struct vm_area_struct *vma,
unsigned int *flags)
{
if (unlikely(*flags & FAULT_FLAG_UNSHARE)) {
if (WARN_ON_ONCE(*flags & FAULT_FLAG_WRITE))
return VM_FAULT_SIGSEGV;
/*
* FAULT_FLAG_UNSHARE only applies to COW mappings. Let's
* just treat it like an ordinary read-fault otherwise.
*/
if (!is_cow_mapping(vma->vm_flags))
*flags &= ~FAULT_FLAG_UNSHARE;
} else if (*flags & FAULT_FLAG_WRITE) {
/* Write faults on read-only mappings are impossible ... */
if (WARN_ON_ONCE(!(vma->vm_flags & VM_MAYWRITE)))
return VM_FAULT_SIGSEGV;
/* ... and FOLL_FORCE only applies to COW mappings. */
if (WARN_ON_ONCE(!(vma->vm_flags & VM_WRITE) &&
!is_cow_mapping(vma->vm_flags)))
return VM_FAULT_SIGSEGV;
}
mm: drop per-VMA lock when returning VM_FAULT_RETRY or VM_FAULT_COMPLETED handle_mm_fault returning VM_FAULT_RETRY or VM_FAULT_COMPLETED means mmap_lock has been released. However with per-VMA locks behavior is different and the caller should still release it. To make the rules consistent for the caller, drop the per-VMA lock when returning VM_FAULT_RETRY or VM_FAULT_COMPLETED. Currently the only path returning VM_FAULT_RETRY under per-VMA locks is do_swap_page and no path returns VM_FAULT_COMPLETED for now. [willy@infradead.org: fix riscv] Link: https://lkml.kernel.org/r/CAJuCfpE6GWEx1rPBmNpUfoD5o-gNFz9-UFywzCE2PbEGBiVz7g@mail.gmail.com Link: https://lkml.kernel.org/r/20230630211957.1341547-4-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Peter Xu <peterx@redhat.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hillf Danton <hdanton@sina.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Michel Lespinasse <michel@lespinasse.org> Cc: Minchan Kim <minchan@google.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-30 21:19:54 +00:00
#ifdef CONFIG_PER_VMA_LOCK
/*
* Per-VMA locks can't be used with FAULT_FLAG_RETRY_NOWAIT because of
* the assumption that lock is dropped on VM_FAULT_RETRY.
*/
if (WARN_ON_ONCE((*flags &
(FAULT_FLAG_VMA_LOCK | FAULT_FLAG_RETRY_NOWAIT)) ==
(FAULT_FLAG_VMA_LOCK | FAULT_FLAG_RETRY_NOWAIT)))
return VM_FAULT_SIGSEGV;
#endif
return 0;
}
/*
* By the time we get here, we already hold the mm semaphore
*
* The mmap_lock may have been released depending on flags and our
* return value. See filemap_fault() and __folio_lock_or_retry().
*/
vm_fault_t handle_mm_fault(struct vm_area_struct *vma, unsigned long address,
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
unsigned int flags, struct pt_regs *regs)
{
/* If the fault handler drops the mmap_lock, vma may be freed */
struct mm_struct *mm = vma->vm_mm;
vm_fault_t ret;
mm: add MAP_DROPPABLE for designating always lazily freeable mappings The vDSO getrandom() implementation works with a buffer allocated with a new system call that has certain requirements: - It shouldn't be written to core dumps. * Easy: VM_DONTDUMP. - It should be zeroed on fork. * Easy: VM_WIPEONFORK. - It shouldn't be written to swap. * Uh-oh: mlock is rlimited. * Uh-oh: mlock isn't inherited by forks. - It shouldn't reserve actual memory, but it also shouldn't crash when page faulting in memory if none is available * Uh-oh: VM_NORESERVE means segfaults. It turns out that the vDSO getrandom() function has three really nice characteristics that we can exploit to solve this problem: 1) Due to being wiped during fork(), the vDSO code is already robust to having the contents of the pages it reads zeroed out midway through the function's execution. 2) In the absolute worst case of whatever contingency we're coding for, we have the option to fallback to the getrandom() syscall, and everything is fine. 3) The buffers the function uses are only ever useful for a maximum of 60 seconds -- a sort of cache, rather than a long term allocation. These characteristics mean that we can introduce VM_DROPPABLE, which has the following semantics: a) It never is written out to swap. b) Under memory pressure, mm can just drop the pages (so that they're zero when read back again). c) It is inherited by fork. d) It doesn't count against the mlock budget, since nothing is locked. e) If there's not enough memory to service a page fault, it's not fatal, and no signal is sent. This way, allocations used by vDSO getrandom() can use: VM_DROPPABLE | VM_DONTDUMP | VM_WIPEONFORK | VM_NORESERVE And there will be no problem with OOMing, crashing on overcommitment, using memory when not in use, not wiping on fork(), coredumps, or writing out to swap. In order to let vDSO getrandom() use this, expose these via mmap(2) as MAP_DROPPABLE. Note that this involves removing the MADV_FREE special case from sort_folio(), which according to Yu Zhao is unnecessary and will simply result in an extra call to shrink_folio_list() in the worst case. The chunk removed reenables the swapbacked flag, which we don't want for VM_DROPPABLE, and we can't conditionalize it here because there isn't a vma reference available. Finally, the provided self test ensures that this is working as desired. Cc: linux-mm@kvack.org Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-08 16:55:04 +00:00
bool is_droppable;
__set_current_state(TASK_RUNNING);
ret = sanitize_fault_flags(vma, &flags);
if (ret)
goto out;
if (!arch_vma_access_permitted(vma, flags & FAULT_FLAG_WRITE,
flags & FAULT_FLAG_INSTRUCTION,
flags & FAULT_FLAG_REMOTE)) {
ret = VM_FAULT_SIGSEGV;
goto out;
}
mm: add MAP_DROPPABLE for designating always lazily freeable mappings The vDSO getrandom() implementation works with a buffer allocated with a new system call that has certain requirements: - It shouldn't be written to core dumps. * Easy: VM_DONTDUMP. - It should be zeroed on fork. * Easy: VM_WIPEONFORK. - It shouldn't be written to swap. * Uh-oh: mlock is rlimited. * Uh-oh: mlock isn't inherited by forks. - It shouldn't reserve actual memory, but it also shouldn't crash when page faulting in memory if none is available * Uh-oh: VM_NORESERVE means segfaults. It turns out that the vDSO getrandom() function has three really nice characteristics that we can exploit to solve this problem: 1) Due to being wiped during fork(), the vDSO code is already robust to having the contents of the pages it reads zeroed out midway through the function's execution. 2) In the absolute worst case of whatever contingency we're coding for, we have the option to fallback to the getrandom() syscall, and everything is fine. 3) The buffers the function uses are only ever useful for a maximum of 60 seconds -- a sort of cache, rather than a long term allocation. These characteristics mean that we can introduce VM_DROPPABLE, which has the following semantics: a) It never is written out to swap. b) Under memory pressure, mm can just drop the pages (so that they're zero when read back again). c) It is inherited by fork. d) It doesn't count against the mlock budget, since nothing is locked. e) If there's not enough memory to service a page fault, it's not fatal, and no signal is sent. This way, allocations used by vDSO getrandom() can use: VM_DROPPABLE | VM_DONTDUMP | VM_WIPEONFORK | VM_NORESERVE And there will be no problem with OOMing, crashing on overcommitment, using memory when not in use, not wiping on fork(), coredumps, or writing out to swap. In order to let vDSO getrandom() use this, expose these via mmap(2) as MAP_DROPPABLE. Note that this involves removing the MADV_FREE special case from sort_folio(), which according to Yu Zhao is unnecessary and will simply result in an extra call to shrink_folio_list() in the worst case. The chunk removed reenables the swapbacked flag, which we don't want for VM_DROPPABLE, and we can't conditionalize it here because there isn't a vma reference available. Finally, the provided self test ensures that this is working as desired. Cc: linux-mm@kvack.org Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-08 16:55:04 +00:00
is_droppable = !!(vma->vm_flags & VM_DROPPABLE);
/*
* Enable the memcg OOM handling for faults triggered in user
* space. Kernel faults are handled more gracefully.
*/
if (flags & FAULT_FLAG_USER)
memcg, oom: move out_of_memory back to the charge path Commit 3812c8c8f395 ("mm: memcg: do not trap chargers with full callstack on OOM") has changed the ENOMEM semantic of memcg charges. Rather than invoking the oom killer from the charging context it delays the oom killer to the page fault path (pagefault_out_of_memory). This in turn means that many users (e.g. slab or g-u-p) will get ENOMEM when the corresponding memcg hits the hard limit and the memcg is is OOM. This is behavior is inconsistent with !memcg case where the oom killer is invoked from the allocation context and the allocator keeps retrying until it succeeds. The difference in the behavior is user visible. mmap(MAP_POPULATE) might result in not fully populated ranges while the mmap return code doesn't tell that to the userspace. Random syscalls might fail with ENOMEM etc. The primary motivation of the different memcg oom semantic was the deadlock avoidance. Things have changed since then, though. We have an async oom teardown by the oom reaper now and so we do not have to rely on the victim to tear down its memory anymore. Therefore we can return to the original semantic as long as the memcg oom killer is not handed over to the users space. There is still one thing to be careful about here though. If the oom killer is not able to make any forward progress - e.g. because there is no eligible task to kill - then we have to bail out of the charge path to prevent from same class of deadlocks. We have basically two options here. Either we fail the charge with ENOMEM or force the charge and allow overcharge. The first option has been considered more harmful than useful because rare inconsistencies in the ENOMEM behavior is hard to test for and error prone. Basically the same reason why the page allocator doesn't fail allocations under such conditions. The later might allow runaways but those should be really unlikely unless somebody misconfigures the system. E.g. allowing to migrate tasks away from the memcg to a different unlimited memcg with move_charge_at_immigrate disabled. Link: http://lkml.kernel.org/r/20180628151101.25307-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:47:11 +00:00
mem_cgroup_enter_user_fault();
mm: multi-gen LRU: groundwork Evictable pages are divided into multiple generations for each lruvec. The youngest generation number is stored in lrugen->max_seq for both anon and file types as they are aged on an equal footing. The oldest generation numbers are stored in lrugen->min_seq[] separately for anon and file types as clean file pages can be evicted regardless of swap constraints. These three variables are monotonically increasing. Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits in order to fit into the gen counter in folio->flags. Each truncated generation number is an index to lrugen->lists[]. The sliding window technique is used to track at least MIN_NR_GENS and at most MAX_NR_GENS generations. The gen counter stores a value within [1, MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it stores 0. There are two conceptually independent procedures: "the aging", which produces young generations, and "the eviction", which consumes old generations. They form a closed-loop system, i.e., "the page reclaim". Both procedures can be invoked from userspace for the purposes of working set estimation and proactive reclaim. These techniques are commonly used to optimize job scheduling (bin packing) in data centers [1][2]. To avoid confusion, the terms "hot" and "cold" will be applied to the multi-gen LRU, as a new convention; the terms "active" and "inactive" will be applied to the active/inactive LRU, as usual. The protection of hot pages and the selection of cold pages are based on page access channels and patterns. There are two access channels: one through page tables and the other through file descriptors. The protection of the former channel is by design stronger because: 1. The uncertainty in determining the access patterns of the former channel is higher due to the approximation of the accessed bit. 2. The cost of evicting the former channel is higher due to the TLB flushes required and the likelihood of encountering the dirty bit. 3. The penalty of underprotecting the former channel is higher because applications usually do not prepare themselves for major page faults like they do for blocked I/O. E.g., GUI applications commonly use dedicated I/O threads to avoid blocking rendering threads. There are also two access patterns: one with temporal locality and the other without. For the reasons listed above, the former channel is assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is present; the latter channel is assumed to follow the latter pattern unless outlying refaults have been observed [3][4]. The next patch will address the "outlying refaults". Three macros, i.e., LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in this patch to make the entire patchset less diffy. A page is added to the youngest generation on faulting. The aging needs to check the accessed bit at least twice before handing this page over to the eviction. The first check takes care of the accessed bit set on the initial fault; the second check makes sure this page has not been used since then. This protocol, AKA second chance, requires a minimum of two generations, hence MIN_NR_GENS. [1] https://dl.acm.org/doi/10.1145/3297858.3304053 [2] https://dl.acm.org/doi/10.1145/3503222.3507731 [3] https://lwn.net/Articles/495543/ [4] https://lwn.net/Articles/815342/ Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Barry Song <baohua@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 08:00:02 +00:00
lru_gen_enter_fault(vma);
if (unlikely(is_vm_hugetlb_page(vma)))
ret = hugetlb_fault(vma->vm_mm, vma, address, flags);
else
ret = __handle_mm_fault(vma, address, flags);
mm: add MAP_DROPPABLE for designating always lazily freeable mappings The vDSO getrandom() implementation works with a buffer allocated with a new system call that has certain requirements: - It shouldn't be written to core dumps. * Easy: VM_DONTDUMP. - It should be zeroed on fork. * Easy: VM_WIPEONFORK. - It shouldn't be written to swap. * Uh-oh: mlock is rlimited. * Uh-oh: mlock isn't inherited by forks. - It shouldn't reserve actual memory, but it also shouldn't crash when page faulting in memory if none is available * Uh-oh: VM_NORESERVE means segfaults. It turns out that the vDSO getrandom() function has three really nice characteristics that we can exploit to solve this problem: 1) Due to being wiped during fork(), the vDSO code is already robust to having the contents of the pages it reads zeroed out midway through the function's execution. 2) In the absolute worst case of whatever contingency we're coding for, we have the option to fallback to the getrandom() syscall, and everything is fine. 3) The buffers the function uses are only ever useful for a maximum of 60 seconds -- a sort of cache, rather than a long term allocation. These characteristics mean that we can introduce VM_DROPPABLE, which has the following semantics: a) It never is written out to swap. b) Under memory pressure, mm can just drop the pages (so that they're zero when read back again). c) It is inherited by fork. d) It doesn't count against the mlock budget, since nothing is locked. e) If there's not enough memory to service a page fault, it's not fatal, and no signal is sent. This way, allocations used by vDSO getrandom() can use: VM_DROPPABLE | VM_DONTDUMP | VM_WIPEONFORK | VM_NORESERVE And there will be no problem with OOMing, crashing on overcommitment, using memory when not in use, not wiping on fork(), coredumps, or writing out to swap. In order to let vDSO getrandom() use this, expose these via mmap(2) as MAP_DROPPABLE. Note that this involves removing the MADV_FREE special case from sort_folio(), which according to Yu Zhao is unnecessary and will simply result in an extra call to shrink_folio_list() in the worst case. The chunk removed reenables the swapbacked flag, which we don't want for VM_DROPPABLE, and we can't conditionalize it here because there isn't a vma reference available. Finally, the provided self test ensures that this is working as desired. Cc: linux-mm@kvack.org Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-08 16:55:04 +00:00
/*
* Warning: It is no longer safe to dereference vma-> after this point,
* because mmap_lock might have been dropped by __handle_mm_fault(), so
* vma might be destroyed from underneath us.
*/
mm: multi-gen LRU: groundwork Evictable pages are divided into multiple generations for each lruvec. The youngest generation number is stored in lrugen->max_seq for both anon and file types as they are aged on an equal footing. The oldest generation numbers are stored in lrugen->min_seq[] separately for anon and file types as clean file pages can be evicted regardless of swap constraints. These three variables are monotonically increasing. Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits in order to fit into the gen counter in folio->flags. Each truncated generation number is an index to lrugen->lists[]. The sliding window technique is used to track at least MIN_NR_GENS and at most MAX_NR_GENS generations. The gen counter stores a value within [1, MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it stores 0. There are two conceptually independent procedures: "the aging", which produces young generations, and "the eviction", which consumes old generations. They form a closed-loop system, i.e., "the page reclaim". Both procedures can be invoked from userspace for the purposes of working set estimation and proactive reclaim. These techniques are commonly used to optimize job scheduling (bin packing) in data centers [1][2]. To avoid confusion, the terms "hot" and "cold" will be applied to the multi-gen LRU, as a new convention; the terms "active" and "inactive" will be applied to the active/inactive LRU, as usual. The protection of hot pages and the selection of cold pages are based on page access channels and patterns. There are two access channels: one through page tables and the other through file descriptors. The protection of the former channel is by design stronger because: 1. The uncertainty in determining the access patterns of the former channel is higher due to the approximation of the accessed bit. 2. The cost of evicting the former channel is higher due to the TLB flushes required and the likelihood of encountering the dirty bit. 3. The penalty of underprotecting the former channel is higher because applications usually do not prepare themselves for major page faults like they do for blocked I/O. E.g., GUI applications commonly use dedicated I/O threads to avoid blocking rendering threads. There are also two access patterns: one with temporal locality and the other without. For the reasons listed above, the former channel is assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is present; the latter channel is assumed to follow the latter pattern unless outlying refaults have been observed [3][4]. The next patch will address the "outlying refaults". Three macros, i.e., LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in this patch to make the entire patchset less diffy. A page is added to the youngest generation on faulting. The aging needs to check the accessed bit at least twice before handing this page over to the eviction. The first check takes care of the accessed bit set on the initial fault; the second check makes sure this page has not been used since then. This protocol, AKA second chance, requires a minimum of two generations, hence MIN_NR_GENS. [1] https://dl.acm.org/doi/10.1145/3297858.3304053 [2] https://dl.acm.org/doi/10.1145/3503222.3507731 [3] https://lwn.net/Articles/495543/ [4] https://lwn.net/Articles/815342/ Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Barry Song <baohua@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 08:00:02 +00:00
lru_gen_exit_fault();
mm: add MAP_DROPPABLE for designating always lazily freeable mappings The vDSO getrandom() implementation works with a buffer allocated with a new system call that has certain requirements: - It shouldn't be written to core dumps. * Easy: VM_DONTDUMP. - It should be zeroed on fork. * Easy: VM_WIPEONFORK. - It shouldn't be written to swap. * Uh-oh: mlock is rlimited. * Uh-oh: mlock isn't inherited by forks. - It shouldn't reserve actual memory, but it also shouldn't crash when page faulting in memory if none is available * Uh-oh: VM_NORESERVE means segfaults. It turns out that the vDSO getrandom() function has three really nice characteristics that we can exploit to solve this problem: 1) Due to being wiped during fork(), the vDSO code is already robust to having the contents of the pages it reads zeroed out midway through the function's execution. 2) In the absolute worst case of whatever contingency we're coding for, we have the option to fallback to the getrandom() syscall, and everything is fine. 3) The buffers the function uses are only ever useful for a maximum of 60 seconds -- a sort of cache, rather than a long term allocation. These characteristics mean that we can introduce VM_DROPPABLE, which has the following semantics: a) It never is written out to swap. b) Under memory pressure, mm can just drop the pages (so that they're zero when read back again). c) It is inherited by fork. d) It doesn't count against the mlock budget, since nothing is locked. e) If there's not enough memory to service a page fault, it's not fatal, and no signal is sent. This way, allocations used by vDSO getrandom() can use: VM_DROPPABLE | VM_DONTDUMP | VM_WIPEONFORK | VM_NORESERVE And there will be no problem with OOMing, crashing on overcommitment, using memory when not in use, not wiping on fork(), coredumps, or writing out to swap. In order to let vDSO getrandom() use this, expose these via mmap(2) as MAP_DROPPABLE. Note that this involves removing the MADV_FREE special case from sort_folio(), which according to Yu Zhao is unnecessary and will simply result in an extra call to shrink_folio_list() in the worst case. The chunk removed reenables the swapbacked flag, which we don't want for VM_DROPPABLE, and we can't conditionalize it here because there isn't a vma reference available. Finally, the provided self test ensures that this is working as desired. Cc: linux-mm@kvack.org Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-12-08 16:55:04 +00:00
/* If the mapping is droppable, then errors due to OOM aren't fatal. */
if (is_droppable)
ret &= ~VM_FAULT_OOM;
if (flags & FAULT_FLAG_USER) {
memcg, oom: move out_of_memory back to the charge path Commit 3812c8c8f395 ("mm: memcg: do not trap chargers with full callstack on OOM") has changed the ENOMEM semantic of memcg charges. Rather than invoking the oom killer from the charging context it delays the oom killer to the page fault path (pagefault_out_of_memory). This in turn means that many users (e.g. slab or g-u-p) will get ENOMEM when the corresponding memcg hits the hard limit and the memcg is is OOM. This is behavior is inconsistent with !memcg case where the oom killer is invoked from the allocation context and the allocator keeps retrying until it succeeds. The difference in the behavior is user visible. mmap(MAP_POPULATE) might result in not fully populated ranges while the mmap return code doesn't tell that to the userspace. Random syscalls might fail with ENOMEM etc. The primary motivation of the different memcg oom semantic was the deadlock avoidance. Things have changed since then, though. We have an async oom teardown by the oom reaper now and so we do not have to rely on the victim to tear down its memory anymore. Therefore we can return to the original semantic as long as the memcg oom killer is not handed over to the users space. There is still one thing to be careful about here though. If the oom killer is not able to make any forward progress - e.g. because there is no eligible task to kill - then we have to bail out of the charge path to prevent from same class of deadlocks. We have basically two options here. Either we fail the charge with ENOMEM or force the charge and allow overcharge. The first option has been considered more harmful than useful because rare inconsistencies in the ENOMEM behavior is hard to test for and error prone. Basically the same reason why the page allocator doesn't fail allocations under such conditions. The later might allow runaways but those should be really unlikely unless somebody misconfigures the system. E.g. allowing to migrate tasks away from the memcg to a different unlimited memcg with move_charge_at_immigrate disabled. Link: http://lkml.kernel.org/r/20180628151101.25307-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:47:11 +00:00
mem_cgroup_exit_user_fault();
/*
* The task may have entered a memcg OOM situation but
* if the allocation error was handled gracefully (no
* VM_FAULT_OOM), there is no need to kill anything.
* Just clean up the OOM state peacefully.
*/
if (task_in_memcg_oom(current) && !(ret & VM_FAULT_OOM))
mem_cgroup_oom_synchronize(false);
}
out:
mm_account_fault(mm, regs, address, flags, ret);
mm: do page fault accounting in handle_mm_fault Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:44 +00:00
return ret;
}
EXPORT_SYMBOL_GPL(handle_mm_fault);
mm: introduce new 'lock_mm_and_find_vma()' page fault helper .. and make x86 use it. This basically extracts the existing x86 "find and expand faulting vma" code, but extends it to also take the mmap lock for writing in case we actually do need to expand the vma. We've historically short-circuited that case, and have some rather ugly special logic to serialize the stack segment expansion (since we only hold the mmap lock for reading) that doesn't match the normal VM locking. That slight violation of locking worked well, right up until it didn't: the maple tree code really does want proper locking even for simple extension of an existing vma. So extract the code for "look up the vma of the fault" from x86, fix it up to do the necessary write locking, and make it available as a helper function for other architectures that can use the common helper. Note: I say "common helper", but it really only handles the normal stack-grows-down case. Which is all architectures except for PA-RISC and IA64. So some rare architectures can't use the helper, but if they care they'll just need to open-code this logic. It's also worth pointing out that this code really would like to have an optimistic "mmap_upgrade_trylock()" to make it quicker to go from a read-lock (for the common case) to taking the write lock (for having to extend the vma) in the normal single-threaded situation where there is no other locking activity. But that _is_ all the very uncommon special case, so while it would be nice to have such an operation, it probably doesn't matter in reality. I did put in the skeleton code for such a possible future expansion, even if it only acts as pseudo-documentation for what we're doing. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-15 22:17:36 +00:00
#ifdef CONFIG_LOCK_MM_AND_FIND_VMA
#include <linux/extable.h>
static inline bool get_mmap_lock_carefully(struct mm_struct *mm, struct pt_regs *regs)
{
mm: avoid 'might_sleep()' in get_mmap_lock_carefully() This might_sleep() goes back a long time: it was originally introduced way back when by commit 010060741ad3 ("x86: add might_sleep() to do_page_fault()"), and made it into the generic VM code when the x86 fault path got re-organized and generalized in commit c2508ec5a58d ("mm: introduce new 'lock_mm_and_find_vma()' page fault helper"). However, it turns out that the placement of that might_sleep() has always been rather questionable simply because it's not only a debug statement to warn about sleeping in contexts that shouldn't sleep (which was the original reason for adding it), but it also implies a voluntary scheduling point. That, in turn, is less than desirable for two reasons: (a) it ends up being done after we successfully got the mmap_lock, so just as we got the lock we will now eagerly schedule away and increase lock contention and (b) this is all very possibly part of the "oops, things went horribly wrong" path and we just haven't figured that out yet After all, the whole _reason_ for having that get_mmap_lock_carefully() rather than just doing the obvious mmap_read_lock() is because this code wants to deal somewhat gracefully with potential kernel wild pointer bugs. So then a voluntary scheduling point here is simply not a good idea. We could certainly turn the 'might_sleep()' into a '__might_sleep()' and make it be just the debug check that it was originally intended to be. But even that seems questionable in the wild kernel pointer case - which again is part of the whole point of this code. The problem wouldn't be about the _sleeping_ part of the page fault, but about a bad kernel access. The fact that that bad kernel access might happen in a section that you shouldn't sleep in is secondary. So it really ends up being the case that this is simply entirely the wrong place to do this debug check and related scheduling point at all. So let's just remove the check entirely. It's been around for over a decade, it has served its purpose. The re-schedule will happen at return to user space anyway for the normal case, and the warning - if we even need it - might be better off done as a special case for "page fault from kernel mode" once we've dealt with any potential kernel oopses where the oops is the relevant thing, not some artificial "scheduling while atomic" test. Reported-by: Mateusz Guzik <mjguzik@gmail.com> Link: https://lore.kernel.org/lkml/20230820104303.2083444-1-mjguzik@gmail.com/ Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-08-21 04:11:33 +00:00
if (likely(mmap_read_trylock(mm)))
mm: introduce new 'lock_mm_and_find_vma()' page fault helper .. and make x86 use it. This basically extracts the existing x86 "find and expand faulting vma" code, but extends it to also take the mmap lock for writing in case we actually do need to expand the vma. We've historically short-circuited that case, and have some rather ugly special logic to serialize the stack segment expansion (since we only hold the mmap lock for reading) that doesn't match the normal VM locking. That slight violation of locking worked well, right up until it didn't: the maple tree code really does want proper locking even for simple extension of an existing vma. So extract the code for "look up the vma of the fault" from x86, fix it up to do the necessary write locking, and make it available as a helper function for other architectures that can use the common helper. Note: I say "common helper", but it really only handles the normal stack-grows-down case. Which is all architectures except for PA-RISC and IA64. So some rare architectures can't use the helper, but if they care they'll just need to open-code this logic. It's also worth pointing out that this code really would like to have an optimistic "mmap_upgrade_trylock()" to make it quicker to go from a read-lock (for the common case) to taking the write lock (for having to extend the vma) in the normal single-threaded situation where there is no other locking activity. But that _is_ all the very uncommon special case, so while it would be nice to have such an operation, it probably doesn't matter in reality. I did put in the skeleton code for such a possible future expansion, even if it only acts as pseudo-documentation for what we're doing. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-15 22:17:36 +00:00
return true;
if (regs && !user_mode(regs)) {
unsigned long ip = exception_ip(regs);
mm: introduce new 'lock_mm_and_find_vma()' page fault helper .. and make x86 use it. This basically extracts the existing x86 "find and expand faulting vma" code, but extends it to also take the mmap lock for writing in case we actually do need to expand the vma. We've historically short-circuited that case, and have some rather ugly special logic to serialize the stack segment expansion (since we only hold the mmap lock for reading) that doesn't match the normal VM locking. That slight violation of locking worked well, right up until it didn't: the maple tree code really does want proper locking even for simple extension of an existing vma. So extract the code for "look up the vma of the fault" from x86, fix it up to do the necessary write locking, and make it available as a helper function for other architectures that can use the common helper. Note: I say "common helper", but it really only handles the normal stack-grows-down case. Which is all architectures except for PA-RISC and IA64. So some rare architectures can't use the helper, but if they care they'll just need to open-code this logic. It's also worth pointing out that this code really would like to have an optimistic "mmap_upgrade_trylock()" to make it quicker to go from a read-lock (for the common case) to taking the write lock (for having to extend the vma) in the normal single-threaded situation where there is no other locking activity. But that _is_ all the very uncommon special case, so while it would be nice to have such an operation, it probably doesn't matter in reality. I did put in the skeleton code for such a possible future expansion, even if it only acts as pseudo-documentation for what we're doing. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-15 22:17:36 +00:00
if (!search_exception_tables(ip))
return false;
}
return !mmap_read_lock_killable(mm);
mm: introduce new 'lock_mm_and_find_vma()' page fault helper .. and make x86 use it. This basically extracts the existing x86 "find and expand faulting vma" code, but extends it to also take the mmap lock for writing in case we actually do need to expand the vma. We've historically short-circuited that case, and have some rather ugly special logic to serialize the stack segment expansion (since we only hold the mmap lock for reading) that doesn't match the normal VM locking. That slight violation of locking worked well, right up until it didn't: the maple tree code really does want proper locking even for simple extension of an existing vma. So extract the code for "look up the vma of the fault" from x86, fix it up to do the necessary write locking, and make it available as a helper function for other architectures that can use the common helper. Note: I say "common helper", but it really only handles the normal stack-grows-down case. Which is all architectures except for PA-RISC and IA64. So some rare architectures can't use the helper, but if they care they'll just need to open-code this logic. It's also worth pointing out that this code really would like to have an optimistic "mmap_upgrade_trylock()" to make it quicker to go from a read-lock (for the common case) to taking the write lock (for having to extend the vma) in the normal single-threaded situation where there is no other locking activity. But that _is_ all the very uncommon special case, so while it would be nice to have such an operation, it probably doesn't matter in reality. I did put in the skeleton code for such a possible future expansion, even if it only acts as pseudo-documentation for what we're doing. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-15 22:17:36 +00:00
}
static inline bool mmap_upgrade_trylock(struct mm_struct *mm)
{
/*
* We don't have this operation yet.
*
* It should be easy enough to do: it's basically a
* atomic_long_try_cmpxchg_acquire()
* from RWSEM_READER_BIAS -> RWSEM_WRITER_LOCKED, but
* it also needs the proper lockdep magic etc.
*/
return false;
}
static inline bool upgrade_mmap_lock_carefully(struct mm_struct *mm, struct pt_regs *regs)
{
mmap_read_unlock(mm);
if (regs && !user_mode(regs)) {
unsigned long ip = exception_ip(regs);
mm: introduce new 'lock_mm_and_find_vma()' page fault helper .. and make x86 use it. This basically extracts the existing x86 "find and expand faulting vma" code, but extends it to also take the mmap lock for writing in case we actually do need to expand the vma. We've historically short-circuited that case, and have some rather ugly special logic to serialize the stack segment expansion (since we only hold the mmap lock for reading) that doesn't match the normal VM locking. That slight violation of locking worked well, right up until it didn't: the maple tree code really does want proper locking even for simple extension of an existing vma. So extract the code for "look up the vma of the fault" from x86, fix it up to do the necessary write locking, and make it available as a helper function for other architectures that can use the common helper. Note: I say "common helper", but it really only handles the normal stack-grows-down case. Which is all architectures except for PA-RISC and IA64. So some rare architectures can't use the helper, but if they care they'll just need to open-code this logic. It's also worth pointing out that this code really would like to have an optimistic "mmap_upgrade_trylock()" to make it quicker to go from a read-lock (for the common case) to taking the write lock (for having to extend the vma) in the normal single-threaded situation where there is no other locking activity. But that _is_ all the very uncommon special case, so while it would be nice to have such an operation, it probably doesn't matter in reality. I did put in the skeleton code for such a possible future expansion, even if it only acts as pseudo-documentation for what we're doing. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-15 22:17:36 +00:00
if (!search_exception_tables(ip))
return false;
}
return !mmap_write_lock_killable(mm);
mm: introduce new 'lock_mm_and_find_vma()' page fault helper .. and make x86 use it. This basically extracts the existing x86 "find and expand faulting vma" code, but extends it to also take the mmap lock for writing in case we actually do need to expand the vma. We've historically short-circuited that case, and have some rather ugly special logic to serialize the stack segment expansion (since we only hold the mmap lock for reading) that doesn't match the normal VM locking. That slight violation of locking worked well, right up until it didn't: the maple tree code really does want proper locking even for simple extension of an existing vma. So extract the code for "look up the vma of the fault" from x86, fix it up to do the necessary write locking, and make it available as a helper function for other architectures that can use the common helper. Note: I say "common helper", but it really only handles the normal stack-grows-down case. Which is all architectures except for PA-RISC and IA64. So some rare architectures can't use the helper, but if they care they'll just need to open-code this logic. It's also worth pointing out that this code really would like to have an optimistic "mmap_upgrade_trylock()" to make it quicker to go from a read-lock (for the common case) to taking the write lock (for having to extend the vma) in the normal single-threaded situation where there is no other locking activity. But that _is_ all the very uncommon special case, so while it would be nice to have such an operation, it probably doesn't matter in reality. I did put in the skeleton code for such a possible future expansion, even if it only acts as pseudo-documentation for what we're doing. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-15 22:17:36 +00:00
}
/*
* Helper for page fault handling.
*
* This is kind of equivalend to "mmap_read_lock()" followed
* by "find_extend_vma()", except it's a lot more careful about
* the locking (and will drop the lock on failure).
*
* For example, if we have a kernel bug that causes a page
* fault, we don't want to just use mmap_read_lock() to get
* the mm lock, because that would deadlock if the bug were
* to happen while we're holding the mm lock for writing.
*
* So this checks the exception tables on kernel faults in
* order to only do this all for instructions that are actually
* expected to fault.
*
* We can also actually take the mm lock for writing if we
* need to extend the vma, which helps the VM layer a lot.
*/
struct vm_area_struct *lock_mm_and_find_vma(struct mm_struct *mm,
unsigned long addr, struct pt_regs *regs)
{
struct vm_area_struct *vma;
if (!get_mmap_lock_carefully(mm, regs))
return NULL;
vma = find_vma(mm, addr);
if (likely(vma && (vma->vm_start <= addr)))
return vma;
/*
* Well, dang. We might still be successful, but only
* if we can extend a vma to do so.
*/
if (!vma || !(vma->vm_flags & VM_GROWSDOWN)) {
mmap_read_unlock(mm);
return NULL;
}
/*
* We can try to upgrade the mmap lock atomically,
* in which case we can continue to use the vma
* we already looked up.
*
* Otherwise we'll have to drop the mmap lock and
* re-take it, and also look up the vma again,
* re-checking it.
*/
if (!mmap_upgrade_trylock(mm)) {
if (!upgrade_mmap_lock_carefully(mm, regs))
return NULL;
vma = find_vma(mm, addr);
if (!vma)
goto fail;
if (vma->vm_start <= addr)
goto success;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto fail;
}
if (expand_stack_locked(vma, addr))
mm: introduce new 'lock_mm_and_find_vma()' page fault helper .. and make x86 use it. This basically extracts the existing x86 "find and expand faulting vma" code, but extends it to also take the mmap lock for writing in case we actually do need to expand the vma. We've historically short-circuited that case, and have some rather ugly special logic to serialize the stack segment expansion (since we only hold the mmap lock for reading) that doesn't match the normal VM locking. That slight violation of locking worked well, right up until it didn't: the maple tree code really does want proper locking even for simple extension of an existing vma. So extract the code for "look up the vma of the fault" from x86, fix it up to do the necessary write locking, and make it available as a helper function for other architectures that can use the common helper. Note: I say "common helper", but it really only handles the normal stack-grows-down case. Which is all architectures except for PA-RISC and IA64. So some rare architectures can't use the helper, but if they care they'll just need to open-code this logic. It's also worth pointing out that this code really would like to have an optimistic "mmap_upgrade_trylock()" to make it quicker to go from a read-lock (for the common case) to taking the write lock (for having to extend the vma) in the normal single-threaded situation where there is no other locking activity. But that _is_ all the very uncommon special case, so while it would be nice to have such an operation, it probably doesn't matter in reality. I did put in the skeleton code for such a possible future expansion, even if it only acts as pseudo-documentation for what we're doing. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-15 22:17:36 +00:00
goto fail;
success:
mmap_write_downgrade(mm);
return vma;
fail:
mmap_write_unlock(mm);
return NULL;
}
#endif
#ifdef CONFIG_PER_VMA_LOCK
/*
* Lookup and lock a VMA under RCU protection. Returned VMA is guaranteed to be
* stable and not isolated. If the VMA is not found or is being modified the
* function returns NULL.
*/
struct vm_area_struct *lock_vma_under_rcu(struct mm_struct *mm,
unsigned long address)
{
MA_STATE(mas, &mm->mm_mt, address, address);
struct vm_area_struct *vma;
rcu_read_lock();
retry:
vma = mas_walk(&mas);
if (!vma)
goto inval;
if (!vma_start_read(vma))
goto inval;
/* Check if the VMA got isolated after we found it */
if (vma->detached) {
vma_end_read(vma);
count_vm_vma_lock_event(VMA_LOCK_MISS);
/* The area was replaced with another one */
goto retry;
}
/*
* At this point, we have a stable reference to a VMA: The VMA is
* locked and we know it hasn't already been isolated.
* From here on, we can access the VMA without worrying about which
* fields are accessible for RCU readers.
*/
/* Check since vm_start/vm_end might change before we lock the VMA */
if (unlikely(address < vma->vm_start || address >= vma->vm_end))
goto inval_end_read;
rcu_read_unlock();
return vma;
inval_end_read:
vma_end_read(vma);
inval:
rcu_read_unlock();
count_vm_vma_lock_event(VMA_LOCK_ABORT);
return NULL;
}
#endif /* CONFIG_PER_VMA_LOCK */
#ifndef __PAGETABLE_P4D_FOLDED
/*
* Allocate p4d page table.
* We've already handled the fast-path in-line.
*/
int __p4d_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
{
p4d_t *new = p4d_alloc_one(mm, address);
if (!new)
return -ENOMEM;
spin_lock(&mm->page_table_lock);
mm: remove redundant smp_wmb() The smp_wmb() which is in the __pte_alloc() is used to ensure all ptes setup is visible before the pte is made visible to other CPUs by being put into page tables. We only need this when the pte is actually populated, so move it to pmd_install(). __pte_alloc_kernel(), __p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar to this case. We can also defer smp_wmb() to the place where the pmd entry is really populated by preallocated pte. There are two kinds of user of preallocated pte, one is filemap & finish_fault(), another is THP. The former does not need another smp_wmb() because the smp_wmb() has been done by pmd_install(). Fortunately, the latter also does not need another smp_wmb() because there is already a smp_wmb() before populating the new pte when the THP uses a preallocated pte to split a huge pmd. Link: https://lkml.kernel.org/r/20210901102722.47686-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:38:41 +00:00
if (pgd_present(*pgd)) { /* Another has populated it */
p4d_free(mm, new);
mm: remove redundant smp_wmb() The smp_wmb() which is in the __pte_alloc() is used to ensure all ptes setup is visible before the pte is made visible to other CPUs by being put into page tables. We only need this when the pte is actually populated, so move it to pmd_install(). __pte_alloc_kernel(), __p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar to this case. We can also defer smp_wmb() to the place where the pmd entry is really populated by preallocated pte. There are two kinds of user of preallocated pte, one is filemap & finish_fault(), another is THP. The former does not need another smp_wmb() because the smp_wmb() has been done by pmd_install(). Fortunately, the latter also does not need another smp_wmb() because there is already a smp_wmb() before populating the new pte when the THP uses a preallocated pte to split a huge pmd. Link: https://lkml.kernel.org/r/20210901102722.47686-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:38:41 +00:00
} else {
smp_wmb(); /* See comment in pmd_install() */
pgd_populate(mm, pgd, new);
mm: remove redundant smp_wmb() The smp_wmb() which is in the __pte_alloc() is used to ensure all ptes setup is visible before the pte is made visible to other CPUs by being put into page tables. We only need this when the pte is actually populated, so move it to pmd_install(). __pte_alloc_kernel(), __p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar to this case. We can also defer smp_wmb() to the place where the pmd entry is really populated by preallocated pte. There are two kinds of user of preallocated pte, one is filemap & finish_fault(), another is THP. The former does not need another smp_wmb() because the smp_wmb() has been done by pmd_install(). Fortunately, the latter also does not need another smp_wmb() because there is already a smp_wmb() before populating the new pte when the THP uses a preallocated pte to split a huge pmd. Link: https://lkml.kernel.org/r/20210901102722.47686-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:38:41 +00:00
}
spin_unlock(&mm->page_table_lock);
return 0;
}
#endif /* __PAGETABLE_P4D_FOLDED */
#ifndef __PAGETABLE_PUD_FOLDED
/*
* Allocate page upper directory.
[PATCH] mm: init_mm without ptlock First step in pushing down the page_table_lock. init_mm.page_table_lock has been used throughout the architectures (usually for ioremap): not to serialize kernel address space allocation (that's usually vmlist_lock), but because pud_alloc,pmd_alloc,pte_alloc_kernel expect caller holds it. Reverse that: don't lock or unlock init_mm.page_table_lock in any of the architectures; instead rely on pud_alloc,pmd_alloc,pte_alloc_kernel to take and drop it when allocating a new one, to check lest a racing task already did. Similarly no page_table_lock in vmalloc's map_vm_area. Some temporary ugliness in __pud_alloc and __pmd_alloc: since they also handle user mms, which are converted only by a later patch, for now they have to lock differently according to whether or not it's init_mm. If sources get muddled, there's a danger that an arch source taking init_mm.page_table_lock will be mixed with common source also taking it (or neither take it). So break the rules and make another change, which should break the build for such a mismatch: remove the redundant mm arg from pte_alloc_kernel (ppc64 scrapped its distinct ioremap_mm in 2.6.13). Exceptions: arm26 used pte_alloc_kernel on user mm, now pte_alloc_map; ia64 used pte_alloc_map on init_mm, now pte_alloc_kernel; parisc had bad args to pmd_alloc and pte_alloc_kernel in unused USE_HPPA_IOREMAP code; ppc64 map_io_page forgot to unlock on failure; ppc mmu_mapin_ram and ppc64 im_free took page_table_lock for no good reason. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:21 +00:00
* We've already handled the fast-path in-line.
*/
int __pud_alloc(struct mm_struct *mm, p4d_t *p4d, unsigned long address)
{
pud_t *new = pud_alloc_one(mm, address);
if (!new)
return -ENOMEM;
[PATCH] mm: init_mm without ptlock First step in pushing down the page_table_lock. init_mm.page_table_lock has been used throughout the architectures (usually for ioremap): not to serialize kernel address space allocation (that's usually vmlist_lock), but because pud_alloc,pmd_alloc,pte_alloc_kernel expect caller holds it. Reverse that: don't lock or unlock init_mm.page_table_lock in any of the architectures; instead rely on pud_alloc,pmd_alloc,pte_alloc_kernel to take and drop it when allocating a new one, to check lest a racing task already did. Similarly no page_table_lock in vmalloc's map_vm_area. Some temporary ugliness in __pud_alloc and __pmd_alloc: since they also handle user mms, which are converted only by a later patch, for now they have to lock differently according to whether or not it's init_mm. If sources get muddled, there's a danger that an arch source taking init_mm.page_table_lock will be mixed with common source also taking it (or neither take it). So break the rules and make another change, which should break the build for such a mismatch: remove the redundant mm arg from pte_alloc_kernel (ppc64 scrapped its distinct ioremap_mm in 2.6.13). Exceptions: arm26 used pte_alloc_kernel on user mm, now pte_alloc_map; ia64 used pte_alloc_map on init_mm, now pte_alloc_kernel; parisc had bad args to pmd_alloc and pte_alloc_kernel in unused USE_HPPA_IOREMAP code; ppc64 map_io_page forgot to unlock on failure; ppc mmu_mapin_ram and ppc64 im_free took page_table_lock for no good reason. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:21 +00:00
spin_lock(&mm->page_table_lock);
if (!p4d_present(*p4d)) {
mm_inc_nr_puds(mm);
mm: remove redundant smp_wmb() The smp_wmb() which is in the __pte_alloc() is used to ensure all ptes setup is visible before the pte is made visible to other CPUs by being put into page tables. We only need this when the pte is actually populated, so move it to pmd_install(). __pte_alloc_kernel(), __p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar to this case. We can also defer smp_wmb() to the place where the pmd entry is really populated by preallocated pte. There are two kinds of user of preallocated pte, one is filemap & finish_fault(), another is THP. The former does not need another smp_wmb() because the smp_wmb() has been done by pmd_install(). Fortunately, the latter also does not need another smp_wmb() because there is already a smp_wmb() before populating the new pte when the THP uses a preallocated pte to split a huge pmd. Link: https://lkml.kernel.org/r/20210901102722.47686-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:38:41 +00:00
smp_wmb(); /* See comment in pmd_install() */
p4d_populate(mm, p4d, new);
} else /* Another has populated it */
pud_free(mm, new);
spin_unlock(&mm->page_table_lock);
return 0;
}
#endif /* __PAGETABLE_PUD_FOLDED */
#ifndef __PAGETABLE_PMD_FOLDED
/*
* Allocate page middle directory.
[PATCH] mm: init_mm without ptlock First step in pushing down the page_table_lock. init_mm.page_table_lock has been used throughout the architectures (usually for ioremap): not to serialize kernel address space allocation (that's usually vmlist_lock), but because pud_alloc,pmd_alloc,pte_alloc_kernel expect caller holds it. Reverse that: don't lock or unlock init_mm.page_table_lock in any of the architectures; instead rely on pud_alloc,pmd_alloc,pte_alloc_kernel to take and drop it when allocating a new one, to check lest a racing task already did. Similarly no page_table_lock in vmalloc's map_vm_area. Some temporary ugliness in __pud_alloc and __pmd_alloc: since they also handle user mms, which are converted only by a later patch, for now they have to lock differently according to whether or not it's init_mm. If sources get muddled, there's a danger that an arch source taking init_mm.page_table_lock will be mixed with common source also taking it (or neither take it). So break the rules and make another change, which should break the build for such a mismatch: remove the redundant mm arg from pte_alloc_kernel (ppc64 scrapped its distinct ioremap_mm in 2.6.13). Exceptions: arm26 used pte_alloc_kernel on user mm, now pte_alloc_map; ia64 used pte_alloc_map on init_mm, now pte_alloc_kernel; parisc had bad args to pmd_alloc and pte_alloc_kernel in unused USE_HPPA_IOREMAP code; ppc64 map_io_page forgot to unlock on failure; ppc mmu_mapin_ram and ppc64 im_free took page_table_lock for no good reason. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:21 +00:00
* We've already handled the fast-path in-line.
*/
int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
{
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
spinlock_t *ptl;
pmd_t *new = pmd_alloc_one(mm, address);
if (!new)
return -ENOMEM;
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
ptl = pud_lock(mm, pud);
mm: account pmd page tables to the process Dave noticed that unprivileged process can allocate significant amount of memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PMD page tables. Linux kernel doesn't account PMD tables to the process, only PTE. The use-cases below use few tricks to allocate a lot of PMD page tables while keeping VmRSS and VmPTE low. oom_score for the process will be 0. #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/prctl.h> #define PUD_SIZE (1UL << 30) #define PMD_SIZE (1UL << 21) #define NR_PUD 130000 int main(void) { char *addr = NULL; unsigned long i; prctl(PR_SET_THP_DISABLE); for (i = 0; i < NR_PUD ; i++) { addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (addr == MAP_FAILED) { perror("mmap"); break; } *addr = 'x'; munmap(addr, PMD_SIZE); mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0); if (addr == MAP_FAILED) perror("re-mmap"), exit(1); } printf("PID %d consumed %lu KiB in PMD page tables\n", getpid(), i * 4096 >> 10); return pause(); } The patch addresses the issue by account PMD tables to the process the same way we account PTE. The main place where PMD tables is accounted is __pmd_alloc() and free_pmd_range(). But there're few corner cases: - HugeTLB can share PMD page tables. The patch handles by accounting the table to all processes who share it. - x86 PAE pre-allocates few PMD tables on fork. - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity check on exit(2). Accounting only happens on configuration where PMD page table's level is present (PMD is not folded). As with nr_ptes we use per-mm counter. The counter value is used to calculate baseline for badness score by oom-killer. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: David Rientjes <rientjes@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 23:26:50 +00:00
if (!pud_present(*pud)) {
mm_inc_nr_pmds(mm);
mm: remove redundant smp_wmb() The smp_wmb() which is in the __pte_alloc() is used to ensure all ptes setup is visible before the pte is made visible to other CPUs by being put into page tables. We only need this when the pte is actually populated, so move it to pmd_install(). __pte_alloc_kernel(), __p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar to this case. We can also defer smp_wmb() to the place where the pmd entry is really populated by preallocated pte. There are two kinds of user of preallocated pte, one is filemap & finish_fault(), another is THP. The former does not need another smp_wmb() because the smp_wmb() has been done by pmd_install(). Fortunately, the latter also does not need another smp_wmb() because there is already a smp_wmb() before populating the new pte when the THP uses a preallocated pte to split a huge pmd. Link: https://lkml.kernel.org/r/20210901102722.47686-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:38:41 +00:00
smp_wmb(); /* See comment in pmd_install() */
pud_populate(mm, pud, new);
mm: remove redundant smp_wmb() The smp_wmb() which is in the __pte_alloc() is used to ensure all ptes setup is visible before the pte is made visible to other CPUs by being put into page tables. We only need this when the pte is actually populated, so move it to pmd_install(). __pte_alloc_kernel(), __p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar to this case. We can also defer smp_wmb() to the place where the pmd entry is really populated by preallocated pte. There are two kinds of user of preallocated pte, one is filemap & finish_fault(), another is THP. The former does not need another smp_wmb() because the smp_wmb() has been done by pmd_install(). Fortunately, the latter also does not need another smp_wmb() because there is already a smp_wmb() before populating the new pte when the THP uses a preallocated pte to split a huge pmd. Link: https://lkml.kernel.org/r/20210901102722.47686-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:38:41 +00:00
} else { /* Another has populated it */
pmd_free(mm, new);
mm: remove redundant smp_wmb() The smp_wmb() which is in the __pte_alloc() is used to ensure all ptes setup is visible before the pte is made visible to other CPUs by being put into page tables. We only need this when the pte is actually populated, so move it to pmd_install(). __pte_alloc_kernel(), __p4d_alloc(), __pud_alloc() and __pmd_alloc() are similar to this case. We can also defer smp_wmb() to the place where the pmd entry is really populated by preallocated pte. There are two kinds of user of preallocated pte, one is filemap & finish_fault(), another is THP. The former does not need another smp_wmb() because the smp_wmb() has been done by pmd_install(). Fortunately, the latter also does not need another smp_wmb() because there is already a smp_wmb() before populating the new pte when the THP uses a preallocated pte to split a huge pmd. Link: https://lkml.kernel.org/r/20210901102722.47686-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:38:41 +00:00
}
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 22:57:02 +00:00
spin_unlock(ptl);
return 0;
[PATCH] Workaround for gcc 2.96 (undefined references) LD .tmp_vmlinux1 mm/built-in.o(.text+0x100d6): In function `copy_page_range': : undefined reference to `__pud_alloc' mm/built-in.o(.text+0x1010b): In function `copy_page_range': : undefined reference to `__pmd_alloc' mm/built-in.o(.text+0x11ef4): In function `__handle_mm_fault': : undefined reference to `__pud_alloc' fs/built-in.o(.text+0xc930): In function `install_arg_page': : undefined reference to `__pud_alloc' make: *** [.tmp_vmlinux1] Error 1 Those missing references in mm/memory.c arise from this code in include/linux/mm.h, combined with the fact that __PGTABLE_PMD_FOLDED and __PGTABLE_PUD_FOLDED are both set and __ARCH_HAS_4LEVEL_HACK is not: /* * The following ifdef needed to get the 4level-fixup.h header to work. * Remove it when 4level-fixup.h has been removed. */ #if defined(CONFIG_MMU) && !defined(__ARCH_HAS_4LEVEL_HACK) static inline pud_t *pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address) { return (unlikely(pgd_none(*pgd)) && __pud_alloc(mm, pgd, address))? NULL: pud_offset(pgd, address); } static inline pmd_t *pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address) { return (unlikely(pud_none(*pud)) && __pmd_alloc(mm, pud, address))? NULL: pmd_offset(pud, address); } #endif /* CONFIG_MMU && !__ARCH_HAS_4LEVEL_HACK */ With my configuration the pgd_none and pud_none routines are inlines returning a constant 0. Apparently the old compiler avoids generating calls to __pud_alloc and __pmd_alloc but still lists them as undefined references in the module's symbol table. I don't know which change caused this problem. I think it was added somewhere between 2.6.14 and 2.6.15-rc1, because I remember building several 2.6.14-rc kernels without difficulty. However I can't point to an individual culprit. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-28 21:43:44 +00:00
}
#endif /* __PAGETABLE_PMD_FOLDED */
/**
* follow_pte - look up PTE at a user virtual address
* @vma: the memory mapping
* @address: user virtual address
* @ptepp: location to store found PTE
* @ptlp: location to store the lock for the PTE
*
* On a successful return, the pointer to the PTE is stored in @ptepp;
* the corresponding lock is taken and its location is stored in @ptlp.
mm: follow_pte() improvements follow_pte() is now our main function to lookup PTEs in VM_PFNMAP/VM_IO VMAs. Let's perform some more sanity checks to make this exported function harder to abuse. Further, extend the doc a bit, it still focuses on the KVM use case with MMU notifiers. Drop the KVM+follow_pfn() comment, follow_pfn() is no more, and we have other users nowadays. Also extend the doc regarding refcounted pages and the interaction with MMU notifiers. KVM is one example that uses MMU notifiers and can deal with refcounted pages properly. VFIO is one example that doesn't use MMU notifiers, and to prevent use-after-free, rejects refcounted pages: pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn)). Protection changes are less of a concern for users like VFIO: the behavior is similar to longterm-pinning a page, and getting the PTE protection changed afterwards. The primary concern with refcounted pages is use-after-free, which callers should be aware of. Link: https://lkml.kernel.org/r/20240410155527.474777-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Fei Li <fei1.li@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Yonghua Huang <yonghua.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-10 15:55:27 +00:00
*
* The contents of the PTE are only stable until @ptlp is released using
* pte_unmap_unlock(). This function will fail if the PTE is non-present.
* Present PTEs may include PTEs that map refcounted pages, such as
* anonymous folios in COW mappings.
*
* Callers must be careful when relying on PTE content after
* pte_unmap_unlock(). Especially if the PTE maps a refcounted page,
* callers must protect against invalidation with MMU notifiers; otherwise
* access to the PFN at a later point in time can trigger use-after-free.
*
* Only IO mappings and raw PFN mappings are allowed. The mmap semaphore
* should be taken for read.
*
mm: follow_pte() improvements follow_pte() is now our main function to lookup PTEs in VM_PFNMAP/VM_IO VMAs. Let's perform some more sanity checks to make this exported function harder to abuse. Further, extend the doc a bit, it still focuses on the KVM use case with MMU notifiers. Drop the KVM+follow_pfn() comment, follow_pfn() is no more, and we have other users nowadays. Also extend the doc regarding refcounted pages and the interaction with MMU notifiers. KVM is one example that uses MMU notifiers and can deal with refcounted pages properly. VFIO is one example that doesn't use MMU notifiers, and to prevent use-after-free, rejects refcounted pages: pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn)). Protection changes are less of a concern for users like VFIO: the behavior is similar to longterm-pinning a page, and getting the PTE protection changed afterwards. The primary concern with refcounted pages is use-after-free, which callers should be aware of. Link: https://lkml.kernel.org/r/20240410155527.474777-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Fei Li <fei1.li@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Yonghua Huang <yonghua.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-10 15:55:27 +00:00
* This function must not be used to modify PTE content.
*
* Return: zero on success, -ve otherwise.
*/
int follow_pte(struct vm_area_struct *vma, unsigned long address,
pte_t **ptepp, spinlock_t **ptlp)
{
struct mm_struct *mm = vma->vm_mm;
pgd_t *pgd;
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd;
pte_t *ptep;
mm: follow_pte() improvements follow_pte() is now our main function to lookup PTEs in VM_PFNMAP/VM_IO VMAs. Let's perform some more sanity checks to make this exported function harder to abuse. Further, extend the doc a bit, it still focuses on the KVM use case with MMU notifiers. Drop the KVM+follow_pfn() comment, follow_pfn() is no more, and we have other users nowadays. Also extend the doc regarding refcounted pages and the interaction with MMU notifiers. KVM is one example that uses MMU notifiers and can deal with refcounted pages properly. VFIO is one example that doesn't use MMU notifiers, and to prevent use-after-free, rejects refcounted pages: pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn)). Protection changes are less of a concern for users like VFIO: the behavior is similar to longterm-pinning a page, and getting the PTE protection changed afterwards. The primary concern with refcounted pages is use-after-free, which callers should be aware of. Link: https://lkml.kernel.org/r/20240410155527.474777-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Fei Li <fei1.li@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Yonghua Huang <yonghua.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-10 15:55:27 +00:00
mmap_assert_locked(mm);
if (unlikely(address < vma->vm_start || address >= vma->vm_end))
goto out;
if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
goto out;
pgd = pgd_offset(mm, address);
if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
goto out;
p4d = p4d_offset(pgd, address);
if (p4d_none(*p4d) || unlikely(p4d_bad(*p4d)))
goto out;
pud = pud_offset(p4d, address);
if (pud_none(*pud) || unlikely(pud_bad(*pud)))
goto out;
pmd = pmd_offset(pud, address);
VM_BUG_ON(pmd_trans_huge(*pmd));
ptep = pte_offset_map_lock(mm, pmd, address, ptlp);
mm/memory: allow pte_offset_map[_lock]() to fail copy_pte_range(): use pte_offset_map_nolock(), and allow for it to fail; but with a comment on some further assumptions that are being made there. zap_pte_range() and zap_pmd_range(): adjust their interaction so that a pte_offset_map_lock() failure in zap_pte_range() leads to a retry in zap_pmd_range(); remove call to pmd_none_or_trans_huge_or_clear_bad(). Allow pte_offset_map_lock() to fail in many functions. Update comment on calling pte_alloc() in do_anonymous_page(). Remove redundant calls to pmd_trans_unstable(), pmd_devmap_trans_unstable(), pmd_none() and pmd_bad(); but leave pmd_none_or_clear_bad() calls in free_pmd_range() and copy_pmd_range(), those do simplify the next level down. Link: https://lkml.kernel.org/r/bb548d50-e99a-f29e-eab1-a43bef2a1287@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:43:38 +00:00
if (!ptep)
goto out;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (!pte_present(ptep_get(ptep)))
goto unlock;
*ptepp = ptep;
return 0;
unlock:
pte_unmap_unlock(ptep, *ptlp);
out:
return -EINVAL;
}
EXPORT_SYMBOL_GPL(follow_pte);
#ifdef CONFIG_HAVE_IOREMAP_PROT
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
/**
* generic_access_phys - generic implementation for iomem mmap access
* @vma: the vma to access
* @addr: userspace address, not relative offset within @vma
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
* @buf: buffer to read/write
* @len: length of transfer
* @write: set to FOLL_WRITE when writing, otherwise reading
*
* This is a generic implementation for &vm_operations_struct.access for an
* iomem mapping. This callback is used by access_process_vm() when the @vma is
* not page based.
*/
int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
void *buf, int len, int write)
{
resource_size_t phys_addr;
unsigned long prot = 0;
void __iomem *maddr;
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
pte_t *ptep, pte;
spinlock_t *ptl;
int offset = offset_in_page(addr);
int ret = -EINVAL;
retry:
if (follow_pte(vma, addr, &ptep, &ptl))
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
return -EINVAL;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte = ptep_get(ptep);
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
pte_unmap_unlock(ptep, ptl);
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
prot = pgprot_val(pte_pgprot(pte));
phys_addr = (resource_size_t)pte_pfn(pte) << PAGE_SHIFT;
if ((write & FOLL_WRITE) && !pte_write(pte))
return -EINVAL;
maddr = ioremap_prot(phys_addr, PAGE_ALIGN(len + offset), prot);
if (!maddr)
return -ENOMEM;
if (follow_pte(vma, addr, &ptep, &ptl))
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
goto out_unmap;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (!pte_same(pte, ptep_get(ptep))) {
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
pte_unmap_unlock(ptep, ptl);
iounmap(maddr);
goto retry;
}
if (write)
memcpy_toio(maddr + offset, buf, len);
else
memcpy_fromio(buf, maddr + offset, len);
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
ret = len;
pte_unmap_unlock(ptep, ptl);
out_unmap:
iounmap(maddr);
mm: Close race in generic_access_phys Way back it was a reasonable assumptions that iomem mappings never change the pfn range they point at. But this has changed: - gpu drivers dynamically manage their memory nowadays, invalidating ptes with unmap_mapping_range when buffers get moved - contiguous dma allocations have moved from dedicated carvetouts to cma regions. This means if we miss the unmap the pfn might contain pagecache or anon memory (well anything allocated with GFP_MOVEABLE) - even /dev/mem now invalidates mappings when the kernel requests that iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Accessing pfns obtained from ptes without holding all the locks is therefore no longer a good idea. Fix this. Since ioremap might need to manipulate pagetables too we need to drop the pt lock and have a retry loop if we raced. While at it, also add kerneldoc and improve the comment for the vma_ops->access function. It's for accessing, not for moving the memory from iomem to system memory, as the old comment seemed to suggest. References: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
2020-11-27 16:41:21 +00:00
return ret;
}
EXPORT_SYMBOL_GPL(generic_access_phys);
#endif
/*
* Access another process' address space as given in mm.
*/
mm: make __access_remote_vm() static Patch series "various improvements to the GUP interface", v2. A series of fixes to simplify and improve the GUP interface with an eye to providing groundwork to future improvements:- * __access_remote_vm() and access_remote_vm() are functionally identical, so make the former static such that in future we can potentially change the external-facing implementation details of this function. * Extend is_valid_gup_args() to cover the missing FOLL_TOUCH case, and simplify things by defining INTERNAL_GUP_FLAGS to check against. * Adjust __get_user_pages_locked() to explicitly treat a failure to pin any pages as an error in all circumstances other than FOLL_NOWAIT being specified, bringing it in line with the nommu implementation of this function. * (With many thanks to Arnd who suggested this in the first instance) Update get_user_page_vma_remote() to explicitly only return a page or an error, simplifying the interface and avoiding the questionable IS_ERR_OR_NULL() pattern. This patch (of 4): access_remote_vm() passes through parameters to __access_remote_vm() directly, so remove the __access_remote_vm() function from mm.h and use access_remote_vm() in the one caller that needs it (ptrace_access_vm()). This allows future adjustments to the GUP-internal __access_remote_vm() function while keeping the access_remote_vm() function stable. Link: https://lkml.kernel.org/r/cover.1696288092.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/f7877c5039ce1c202a514a8aeeefc5cdd5e32d19.1696288092.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-02 23:14:51 +00:00
static int __access_remote_vm(struct mm_struct *mm, unsigned long addr,
void *buf, int len, unsigned int gup_flags)
{
void *old_buf = buf;
int write = gup_flags & FOLL_WRITE;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
if (mmap_read_lock_killable(mm))
return 0;
/* Untag the address before looking up the VMA */
addr = untagged_addr_remote(mm, addr);
/* Avoid triggering the temporary warning in __get_user_pages */
if (!vma_lookup(mm, addr) && !expand_stack(mm, addr))
return 0;
/* ignore errors, just check how much was successfully transferred */
while (len) {
mm/gup: remove vmas parameter from get_user_pages_remote() The only instances of get_user_pages_remote() invocations which used the vmas parameter were for a single page which can instead simply look up the VMA directly. In particular:- - __update_ref_ctr() looked up the VMA but did nothing with it so we simply remove it. - __access_remote_vm() was already using vma_lookup() when the original lookup failed so by doing the lookup directly this also de-duplicates the code. We are able to perform these VMA operations as we already hold the mmap_lock in order to be able to call get_user_pages_remote(). As part of this work we add get_user_page_vma_remote() which abstracts the VMA lookup, error handling and decrementing the page reference count should the VMA lookup fail. This forms part of a broader set of patches intended to eliminate the vmas parameter altogether. [akpm@linux-foundation.org: avoid passing NULL to PTR_ERR] Link: https://lkml.kernel.org/r/d20128c849ecdbf4dd01cc828fcec32127ed939a.1684350871.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> (for arm64) Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> (for s390) Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Christian König <christian.koenig@amd.com> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-17 19:25:39 +00:00
int bytes, offset;
void *maddr;
mm/gup: remove vmas parameter from get_user_pages_remote() The only instances of get_user_pages_remote() invocations which used the vmas parameter were for a single page which can instead simply look up the VMA directly. In particular:- - __update_ref_ctr() looked up the VMA but did nothing with it so we simply remove it. - __access_remote_vm() was already using vma_lookup() when the original lookup failed so by doing the lookup directly this also de-duplicates the code. We are able to perform these VMA operations as we already hold the mmap_lock in order to be able to call get_user_pages_remote(). As part of this work we add get_user_page_vma_remote() which abstracts the VMA lookup, error handling and decrementing the page reference count should the VMA lookup fail. This forms part of a broader set of patches intended to eliminate the vmas parameter altogether. [akpm@linux-foundation.org: avoid passing NULL to PTR_ERR] Link: https://lkml.kernel.org/r/d20128c849ecdbf4dd01cc828fcec32127ed939a.1684350871.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> (for arm64) Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> (for s390) Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Christian König <christian.koenig@amd.com> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-17 19:25:39 +00:00
struct vm_area_struct *vma = NULL;
struct page *page = get_user_page_vma_remote(mm, addr,
gup_flags, &vma);
if (IS_ERR(page)) {
Merge branch 'expand-stack' This modifies our user mode stack expansion code to always take the mmap_lock for writing before modifying the VM layout. It's actually something we always technically should have done, but because we didn't strictly need it, we were being lazy ("opportunistic" sounds so much better, doesn't it?) about things, and had this hack in place where we would extend the stack vma in-place without doing the proper locking. And it worked fine. We just needed to change vm_start (or, in the case of grow-up stacks, vm_end) and together with some special ad-hoc locking using the anon_vma lock and the mm->page_table_lock, it all was fairly straightforward. That is, it was all fine until Ruihan Li pointed out that now that the vma layout uses the maple tree code, we *really* don't just change vm_start and vm_end any more, and the locking really is broken. Oops. It's not actually all _that_ horrible to fix this once and for all, and do proper locking, but it's a bit painful. We have basically three different cases of stack expansion, and they all work just a bit differently: - the common and obvious case is the page fault handling. It's actually fairly simple and straightforward, except for the fact that we have something like 24 different versions of it, and you end up in a maze of twisty little passages, all alike. - the simplest case is the execve() code that creates a new stack. There are no real locking concerns because it's all in a private new VM that hasn't been exposed to anybody, but lockdep still can end up unhappy if you get it wrong. - and finally, we have GUP and page pinning, which shouldn't really be expanding the stack in the first place, but in addition to execve() we also use it for ptrace(). And debuggers do want to possibly access memory under the stack pointer and thus need to be able to expand the stack as a special case. None of these cases are exactly complicated, but the page fault case in particular is just repeated slightly differently many many times. And ia64 in particular has a fairly complicated situation where you can have both a regular grow-down stack _and_ a special grow-up stack for the register backing store. So to make this slightly more manageable, the bulk of this series is to first create a helper function for the most common page fault case, and convert all the straightforward architectures to it. Thus the new 'lock_mm_and_find_vma()' helper function, which ends up being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon, loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more than half the architectures, we now have more shared code and avoid some of those twisty little passages. And largely due to this common helper function, the full diffstat of this series ends up deleting more lines than it adds. That still leaves eight architectures (ia64, m68k, microblaze, openrisc, parisc, s390, sparc64 and um) that end up doing 'expand_stack()' manually because they are doing something slightly different from the normal pattern. Along with the couple of special cases in execve() and GUP. So there's a couple of patches that first create 'locked' helper versions of the stack expansion functions, so that there's a obvious path forward in the conversion. The execve() case is then actually pretty simple, and is a nice cleanup from our old "grow-up stackls are special, because at execve time even they grow down". The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because it's just more straightforward to write out the stack expansion there manually, instead od having get_user_pages_remote() do it for us in some situations but not others and have to worry about locking rules for GUP. And the final step is then to just convert the remaining odd cases to a new world order where 'expand_stack()' is called with the mmap_lock held for reading, but where it might drop it and upgrade it to a write, only to return with it held for reading (in the success case) or with it completely dropped (in the failure case). In the process, we remove all the stack expansion from GUP (where dropping the lock wouldn't be ok without special rules anyway), and add it in manually to __access_remote_vm() for ptrace(). Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases. Everything else here felt pretty straightforward, but the ia64 rules for stack expansion are really quite odd and very different from everything else. Also thanks to Vegard Nossum who caught me getting one of those odd conditions entirely the wrong way around. Anyway, I think I want to actually move all the stack expansion code to a whole new file of its own, rather than have it split up between mm/mmap.c and mm/memory.c, but since this will have to be backported to the initial maple tree vma introduction anyway, I tried to keep the patches _fairly_ minimal. Also, while I don't think it's valid to expand the stack from GUP, the final patch in here is a "warn if some crazy GUP user wants to try to expand the stack" patch. That one will be reverted before the final release, but it's left to catch any odd cases during the merge window and release candidates. Reported-by: Ruihan Li <lrh2000@pku.edu.cn> * branch 'expand-stack': gup: add warning if some caller would seem to want stack expansion mm: always expand the stack with the mmap write lock held execve: expand new process stack manually ahead of time mm: make find_extend_vma() fail if write lock not held powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma() mm/fault: convert remaining simple cases to lock_mm_and_find_vma() arm/mm: Convert to using lock_mm_and_find_vma() riscv/mm: Convert to using lock_mm_and_find_vma() mips/mm: Convert to using lock_mm_and_find_vma() powerpc/mm: Convert to using lock_mm_and_find_vma() arm64/mm: Convert to using lock_mm_and_find_vma() mm: make the page fault mmap locking killable mm: introduce new 'lock_mm_and_find_vma()' page fault helper
2023-06-29 03:35:21 +00:00
/* We might need to expand the stack to access it */
vma = vma_lookup(mm, addr);
if (!vma) {
vma = expand_stack(mm, addr);
/* mmap_lock was dropped on failure */
if (!vma)
return buf - old_buf;
/* Try again if stack expansion worked */
continue;
}
/*
* Check if this is a VM_IO | VM_PFNMAP VMA, which
* we can access using slightly different code.
*/
Merge branch 'expand-stack' This modifies our user mode stack expansion code to always take the mmap_lock for writing before modifying the VM layout. It's actually something we always technically should have done, but because we didn't strictly need it, we were being lazy ("opportunistic" sounds so much better, doesn't it?) about things, and had this hack in place where we would extend the stack vma in-place without doing the proper locking. And it worked fine. We just needed to change vm_start (or, in the case of grow-up stacks, vm_end) and together with some special ad-hoc locking using the anon_vma lock and the mm->page_table_lock, it all was fairly straightforward. That is, it was all fine until Ruihan Li pointed out that now that the vma layout uses the maple tree code, we *really* don't just change vm_start and vm_end any more, and the locking really is broken. Oops. It's not actually all _that_ horrible to fix this once and for all, and do proper locking, but it's a bit painful. We have basically three different cases of stack expansion, and they all work just a bit differently: - the common and obvious case is the page fault handling. It's actually fairly simple and straightforward, except for the fact that we have something like 24 different versions of it, and you end up in a maze of twisty little passages, all alike. - the simplest case is the execve() code that creates a new stack. There are no real locking concerns because it's all in a private new VM that hasn't been exposed to anybody, but lockdep still can end up unhappy if you get it wrong. - and finally, we have GUP and page pinning, which shouldn't really be expanding the stack in the first place, but in addition to execve() we also use it for ptrace(). And debuggers do want to possibly access memory under the stack pointer and thus need to be able to expand the stack as a special case. None of these cases are exactly complicated, but the page fault case in particular is just repeated slightly differently many many times. And ia64 in particular has a fairly complicated situation where you can have both a regular grow-down stack _and_ a special grow-up stack for the register backing store. So to make this slightly more manageable, the bulk of this series is to first create a helper function for the most common page fault case, and convert all the straightforward architectures to it. Thus the new 'lock_mm_and_find_vma()' helper function, which ends up being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon, loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more than half the architectures, we now have more shared code and avoid some of those twisty little passages. And largely due to this common helper function, the full diffstat of this series ends up deleting more lines than it adds. That still leaves eight architectures (ia64, m68k, microblaze, openrisc, parisc, s390, sparc64 and um) that end up doing 'expand_stack()' manually because they are doing something slightly different from the normal pattern. Along with the couple of special cases in execve() and GUP. So there's a couple of patches that first create 'locked' helper versions of the stack expansion functions, so that there's a obvious path forward in the conversion. The execve() case is then actually pretty simple, and is a nice cleanup from our old "grow-up stackls are special, because at execve time even they grow down". The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because it's just more straightforward to write out the stack expansion there manually, instead od having get_user_pages_remote() do it for us in some situations but not others and have to worry about locking rules for GUP. And the final step is then to just convert the remaining odd cases to a new world order where 'expand_stack()' is called with the mmap_lock held for reading, but where it might drop it and upgrade it to a write, only to return with it held for reading (in the success case) or with it completely dropped (in the failure case). In the process, we remove all the stack expansion from GUP (where dropping the lock wouldn't be ok without special rules anyway), and add it in manually to __access_remote_vm() for ptrace(). Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases. Everything else here felt pretty straightforward, but the ia64 rules for stack expansion are really quite odd and very different from everything else. Also thanks to Vegard Nossum who caught me getting one of those odd conditions entirely the wrong way around. Anyway, I think I want to actually move all the stack expansion code to a whole new file of its own, rather than have it split up between mm/mmap.c and mm/memory.c, but since this will have to be backported to the initial maple tree vma introduction anyway, I tried to keep the patches _fairly_ minimal. Also, while I don't think it's valid to expand the stack from GUP, the final patch in here is a "warn if some crazy GUP user wants to try to expand the stack" patch. That one will be reverted before the final release, but it's left to catch any odd cases during the merge window and release candidates. Reported-by: Ruihan Li <lrh2000@pku.edu.cn> * branch 'expand-stack': gup: add warning if some caller would seem to want stack expansion mm: always expand the stack with the mmap write lock held execve: expand new process stack manually ahead of time mm: make find_extend_vma() fail if write lock not held powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma() mm/fault: convert remaining simple cases to lock_mm_and_find_vma() arm/mm: Convert to using lock_mm_and_find_vma() riscv/mm: Convert to using lock_mm_and_find_vma() mips/mm: Convert to using lock_mm_and_find_vma() powerpc/mm: Convert to using lock_mm_and_find_vma() arm64/mm: Convert to using lock_mm_and_find_vma() mm: make the page fault mmap locking killable mm: introduce new 'lock_mm_and_find_vma()' page fault helper
2023-06-29 03:35:21 +00:00
bytes = 0;
#ifdef CONFIG_HAVE_IOREMAP_PROT
if (vma->vm_ops && vma->vm_ops->access)
Merge branch 'expand-stack' This modifies our user mode stack expansion code to always take the mmap_lock for writing before modifying the VM layout. It's actually something we always technically should have done, but because we didn't strictly need it, we were being lazy ("opportunistic" sounds so much better, doesn't it?) about things, and had this hack in place where we would extend the stack vma in-place without doing the proper locking. And it worked fine. We just needed to change vm_start (or, in the case of grow-up stacks, vm_end) and together with some special ad-hoc locking using the anon_vma lock and the mm->page_table_lock, it all was fairly straightforward. That is, it was all fine until Ruihan Li pointed out that now that the vma layout uses the maple tree code, we *really* don't just change vm_start and vm_end any more, and the locking really is broken. Oops. It's not actually all _that_ horrible to fix this once and for all, and do proper locking, but it's a bit painful. We have basically three different cases of stack expansion, and they all work just a bit differently: - the common and obvious case is the page fault handling. It's actually fairly simple and straightforward, except for the fact that we have something like 24 different versions of it, and you end up in a maze of twisty little passages, all alike. - the simplest case is the execve() code that creates a new stack. There are no real locking concerns because it's all in a private new VM that hasn't been exposed to anybody, but lockdep still can end up unhappy if you get it wrong. - and finally, we have GUP and page pinning, which shouldn't really be expanding the stack in the first place, but in addition to execve() we also use it for ptrace(). And debuggers do want to possibly access memory under the stack pointer and thus need to be able to expand the stack as a special case. None of these cases are exactly complicated, but the page fault case in particular is just repeated slightly differently many many times. And ia64 in particular has a fairly complicated situation where you can have both a regular grow-down stack _and_ a special grow-up stack for the register backing store. So to make this slightly more manageable, the bulk of this series is to first create a helper function for the most common page fault case, and convert all the straightforward architectures to it. Thus the new 'lock_mm_and_find_vma()' helper function, which ends up being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon, loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more than half the architectures, we now have more shared code and avoid some of those twisty little passages. And largely due to this common helper function, the full diffstat of this series ends up deleting more lines than it adds. That still leaves eight architectures (ia64, m68k, microblaze, openrisc, parisc, s390, sparc64 and um) that end up doing 'expand_stack()' manually because they are doing something slightly different from the normal pattern. Along with the couple of special cases in execve() and GUP. So there's a couple of patches that first create 'locked' helper versions of the stack expansion functions, so that there's a obvious path forward in the conversion. The execve() case is then actually pretty simple, and is a nice cleanup from our old "grow-up stackls are special, because at execve time even they grow down". The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because it's just more straightforward to write out the stack expansion there manually, instead od having get_user_pages_remote() do it for us in some situations but not others and have to worry about locking rules for GUP. And the final step is then to just convert the remaining odd cases to a new world order where 'expand_stack()' is called with the mmap_lock held for reading, but where it might drop it and upgrade it to a write, only to return with it held for reading (in the success case) or with it completely dropped (in the failure case). In the process, we remove all the stack expansion from GUP (where dropping the lock wouldn't be ok without special rules anyway), and add it in manually to __access_remote_vm() for ptrace(). Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases. Everything else here felt pretty straightforward, but the ia64 rules for stack expansion are really quite odd and very different from everything else. Also thanks to Vegard Nossum who caught me getting one of those odd conditions entirely the wrong way around. Anyway, I think I want to actually move all the stack expansion code to a whole new file of its own, rather than have it split up between mm/mmap.c and mm/memory.c, but since this will have to be backported to the initial maple tree vma introduction anyway, I tried to keep the patches _fairly_ minimal. Also, while I don't think it's valid to expand the stack from GUP, the final patch in here is a "warn if some crazy GUP user wants to try to expand the stack" patch. That one will be reverted before the final release, but it's left to catch any odd cases during the merge window and release candidates. Reported-by: Ruihan Li <lrh2000@pku.edu.cn> * branch 'expand-stack': gup: add warning if some caller would seem to want stack expansion mm: always expand the stack with the mmap write lock held execve: expand new process stack manually ahead of time mm: make find_extend_vma() fail if write lock not held powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma() mm/fault: convert remaining simple cases to lock_mm_and_find_vma() arm/mm: Convert to using lock_mm_and_find_vma() riscv/mm: Convert to using lock_mm_and_find_vma() mips/mm: Convert to using lock_mm_and_find_vma() powerpc/mm: Convert to using lock_mm_and_find_vma() arm64/mm: Convert to using lock_mm_and_find_vma() mm: make the page fault mmap locking killable mm: introduce new 'lock_mm_and_find_vma()' page fault helper
2023-06-29 03:35:21 +00:00
bytes = vma->vm_ops->access(vma, addr, buf,
len, write);
#endif
Merge branch 'expand-stack' This modifies our user mode stack expansion code to always take the mmap_lock for writing before modifying the VM layout. It's actually something we always technically should have done, but because we didn't strictly need it, we were being lazy ("opportunistic" sounds so much better, doesn't it?) about things, and had this hack in place where we would extend the stack vma in-place without doing the proper locking. And it worked fine. We just needed to change vm_start (or, in the case of grow-up stacks, vm_end) and together with some special ad-hoc locking using the anon_vma lock and the mm->page_table_lock, it all was fairly straightforward. That is, it was all fine until Ruihan Li pointed out that now that the vma layout uses the maple tree code, we *really* don't just change vm_start and vm_end any more, and the locking really is broken. Oops. It's not actually all _that_ horrible to fix this once and for all, and do proper locking, but it's a bit painful. We have basically three different cases of stack expansion, and they all work just a bit differently: - the common and obvious case is the page fault handling. It's actually fairly simple and straightforward, except for the fact that we have something like 24 different versions of it, and you end up in a maze of twisty little passages, all alike. - the simplest case is the execve() code that creates a new stack. There are no real locking concerns because it's all in a private new VM that hasn't been exposed to anybody, but lockdep still can end up unhappy if you get it wrong. - and finally, we have GUP and page pinning, which shouldn't really be expanding the stack in the first place, but in addition to execve() we also use it for ptrace(). And debuggers do want to possibly access memory under the stack pointer and thus need to be able to expand the stack as a special case. None of these cases are exactly complicated, but the page fault case in particular is just repeated slightly differently many many times. And ia64 in particular has a fairly complicated situation where you can have both a regular grow-down stack _and_ a special grow-up stack for the register backing store. So to make this slightly more manageable, the bulk of this series is to first create a helper function for the most common page fault case, and convert all the straightforward architectures to it. Thus the new 'lock_mm_and_find_vma()' helper function, which ends up being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon, loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more than half the architectures, we now have more shared code and avoid some of those twisty little passages. And largely due to this common helper function, the full diffstat of this series ends up deleting more lines than it adds. That still leaves eight architectures (ia64, m68k, microblaze, openrisc, parisc, s390, sparc64 and um) that end up doing 'expand_stack()' manually because they are doing something slightly different from the normal pattern. Along with the couple of special cases in execve() and GUP. So there's a couple of patches that first create 'locked' helper versions of the stack expansion functions, so that there's a obvious path forward in the conversion. The execve() case is then actually pretty simple, and is a nice cleanup from our old "grow-up stackls are special, because at execve time even they grow down". The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because it's just more straightforward to write out the stack expansion there manually, instead od having get_user_pages_remote() do it for us in some situations but not others and have to worry about locking rules for GUP. And the final step is then to just convert the remaining odd cases to a new world order where 'expand_stack()' is called with the mmap_lock held for reading, but where it might drop it and upgrade it to a write, only to return with it held for reading (in the success case) or with it completely dropped (in the failure case). In the process, we remove all the stack expansion from GUP (where dropping the lock wouldn't be ok without special rules anyway), and add it in manually to __access_remote_vm() for ptrace(). Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases. Everything else here felt pretty straightforward, but the ia64 rules for stack expansion are really quite odd and very different from everything else. Also thanks to Vegard Nossum who caught me getting one of those odd conditions entirely the wrong way around. Anyway, I think I want to actually move all the stack expansion code to a whole new file of its own, rather than have it split up between mm/mmap.c and mm/memory.c, but since this will have to be backported to the initial maple tree vma introduction anyway, I tried to keep the patches _fairly_ minimal. Also, while I don't think it's valid to expand the stack from GUP, the final patch in here is a "warn if some crazy GUP user wants to try to expand the stack" patch. That one will be reverted before the final release, but it's left to catch any odd cases during the merge window and release candidates. Reported-by: Ruihan Li <lrh2000@pku.edu.cn> * branch 'expand-stack': gup: add warning if some caller would seem to want stack expansion mm: always expand the stack with the mmap write lock held execve: expand new process stack manually ahead of time mm: make find_extend_vma() fail if write lock not held powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma() mm/fault: convert remaining simple cases to lock_mm_and_find_vma() arm/mm: Convert to using lock_mm_and_find_vma() riscv/mm: Convert to using lock_mm_and_find_vma() mips/mm: Convert to using lock_mm_and_find_vma() powerpc/mm: Convert to using lock_mm_and_find_vma() arm64/mm: Convert to using lock_mm_and_find_vma() mm: make the page fault mmap locking killable mm: introduce new 'lock_mm_and_find_vma()' page fault helper
2023-06-29 03:35:21 +00:00
if (bytes <= 0)
break;
} else {
bytes = len;
offset = addr & (PAGE_SIZE-1);
if (bytes > PAGE_SIZE-offset)
bytes = PAGE_SIZE-offset;
mm/memory: replace kmap() with kmap_local_page() kmap() has been deprecated in favor of kmap_local_page(). Therefore, replace kmap() with kmap_local_page() in mm/memory.c. There are two main problems with kmap(): (1) It comes with an overhead as the mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap's pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page-faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. The tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored and still valid. Obviously, thread locality implies that the kernel virtual addresses returned by kmap_local_page() are only valid in the context of the callers (i.e., they cannot be handed to other threads). The use of kmap_local_page() in mm/memory.c does not break the above-mentioned assumption, so it is allowed and preferred. Link: https://lkml.kernel.org/r/20231215084417.2002370-1-fabio.maria.de.francesco@linux.intel.com Link: https://lkml.kernel.org/r/20231214081039.1919328-1-fabio.maria.de.francesco@linux.intel.com Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-14 08:10:04 +00:00
maddr = kmap_local_page(page);
if (write) {
copy_to_user_page(vma, page, addr,
maddr + offset, buf, bytes);
set_page_dirty_lock(page);
} else {
copy_from_user_page(vma, page, addr,
buf, maddr + offset, bytes);
}
mm/memory: replace kmap() with kmap_local_page() kmap() has been deprecated in favor of kmap_local_page(). Therefore, replace kmap() with kmap_local_page() in mm/memory.c. There are two main problems with kmap(): (1) It comes with an overhead as the mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap's pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page-faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. The tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored and still valid. Obviously, thread locality implies that the kernel virtual addresses returned by kmap_local_page() are only valid in the context of the callers (i.e., they cannot be handed to other threads). The use of kmap_local_page() in mm/memory.c does not break the above-mentioned assumption, so it is allowed and preferred. Link: https://lkml.kernel.org/r/20231215084417.2002370-1-fabio.maria.de.francesco@linux.intel.com Link: https://lkml.kernel.org/r/20231214081039.1919328-1-fabio.maria.de.francesco@linux.intel.com Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-14 08:10:04 +00:00
unmap_and_put_page(page, maddr);
}
len -= bytes;
buf += bytes;
addr += bytes;
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_read_unlock(mm);
return buf - old_buf;
}
/**
* access_remote_vm - access another process' address space
* @mm: the mm_struct of the target address space
* @addr: start address to access
* @buf: source or destination buffer
* @len: number of bytes to transfer
* @gup_flags: flags modifying lookup behaviour
*
* The caller must hold a reference on @mm.
*
* Return: number of bytes copied from source to destination.
*/
int access_remote_vm(struct mm_struct *mm, unsigned long addr,
void *buf, int len, unsigned int gup_flags)
{
return __access_remote_vm(mm, addr, buf, len, gup_flags);
}
/*
* Access another process' address space.
* Source/target buffer must be kernel space,
* Do not walk the page table directly, use get_user_pages
*/
int access_process_vm(struct task_struct *tsk, unsigned long addr,
void *buf, int len, unsigned int gup_flags)
{
struct mm_struct *mm;
int ret;
mm = get_task_mm(tsk);
if (!mm)
return 0;
ret = __access_remote_vm(mm, addr, buf, len, gup_flags);
mmput(mm);
return ret;
}
EXPORT_SYMBOL_GPL(access_process_vm);
/*
* Print the name of a VMA.
*/
void print_vma_addr(char *prefix, unsigned long ip)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
x86: fix "BUG: sleeping function called from invalid context" in print_vma_addr() Jiri Kosina reported the following deadlock scenario with show_unhandled_signals enabled: [ 68.379022] gnome-settings-[2941] trap int3 ip:3d2c840f34 sp:7fff36f5d100 error:0<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:21 [ 68.379039] in_atomic():1, irqs_disabled():0 [ 68.379044] no locks held by gnome-settings-/2941. [ 68.379050] Pid: 2941, comm: gnome-settings- Not tainted 2.6.25-rc1 #30 [ 68.379054] [ 68.379056] Call Trace: [ 68.379061] <#DB> [<ffffffff81064883>] ? __debug_show_held_locks+0x13/0x30 [ 68.379109] [<ffffffff81036765>] __might_sleep+0xe5/0x110 [ 68.379123] [<ffffffff812f2240>] down_read+0x20/0x70 [ 68.379137] [<ffffffff8109cdca>] print_vma_addr+0x3a/0x110 [ 68.379152] [<ffffffff8100f435>] do_trap+0xf5/0x170 [ 68.379168] [<ffffffff8100f52b>] do_int3+0x7b/0xe0 [ 68.379180] [<ffffffff812f4a6f>] int3+0x9f/0xd0 [ 68.379203] <<EOE>> [ 68.379229] in libglib-2.0.so.0.1505.0[3d2c800000+dc000] and tracked it down to: commit 03252919b79891063cf99145612360efbdf9500b Author: Andi Kleen <ak@suse.de> Date: Wed Jan 30 13:33:18 2008 +0100 x86: print which shared library/executable faulted in segfault etc. messages the problem is that we call down_read() from an atomic context. Solve this by returning from print_vma_addr() if the preempt count is elevated. Update preempt_conditional_sti / preempt_conditional_cli to unconditionally lift the preempt count even on !CONFIG_PREEMPT. Reported-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 19:21:06 +00:00
/*
mm: do not rely on preempt_count in print_vma_addr The preempt count check on print_vma_addr has been added by commit e8bff74afbdb ("x86: fix "BUG: sleeping function called from invalid context" in print_vma_addr()") and it relied on the elevated preempt count from preempt_conditional_sti because preempt_count check doesn't work on non preemptive kernels by default. The code has evolved though and commit d99e1bd175f4 ("x86/entry/traps: Refactor preemption and interrupt flag handling") has replaced preempt_conditional_sti by an explicit preempt_disable which is noop on !PREEMPT so the check in print_vma_addr is broken. Fix the issue by using trylock on mmap_sem rather than chacking the preempt count. The allocation we are relying on has to be GFP_NOWAIT as well. There is a chance that we won't dump the vma state if the lock is contended or the memory short but this is acceptable outcome and much less fragile than the not working preemption check or tricks around it. Link: http://lkml.kernel.org/r/20171106134031.g6dbelg55mrbyc6i@dhcp22.suse.cz Fixes: d99e1bd175f4 ("x86/entry/traps: Refactor preemption and interrupt flag handling") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Yang Shi <yang.s@alibaba-inc.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:38:59 +00:00
* we might be running from an atomic context so we cannot sleep
x86: fix "BUG: sleeping function called from invalid context" in print_vma_addr() Jiri Kosina reported the following deadlock scenario with show_unhandled_signals enabled: [ 68.379022] gnome-settings-[2941] trap int3 ip:3d2c840f34 sp:7fff36f5d100 error:0<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:21 [ 68.379039] in_atomic():1, irqs_disabled():0 [ 68.379044] no locks held by gnome-settings-/2941. [ 68.379050] Pid: 2941, comm: gnome-settings- Not tainted 2.6.25-rc1 #30 [ 68.379054] [ 68.379056] Call Trace: [ 68.379061] <#DB> [<ffffffff81064883>] ? __debug_show_held_locks+0x13/0x30 [ 68.379109] [<ffffffff81036765>] __might_sleep+0xe5/0x110 [ 68.379123] [<ffffffff812f2240>] down_read+0x20/0x70 [ 68.379137] [<ffffffff8109cdca>] print_vma_addr+0x3a/0x110 [ 68.379152] [<ffffffff8100f435>] do_trap+0xf5/0x170 [ 68.379168] [<ffffffff8100f52b>] do_int3+0x7b/0xe0 [ 68.379180] [<ffffffff812f4a6f>] int3+0x9f/0xd0 [ 68.379203] <<EOE>> [ 68.379229] in libglib-2.0.so.0.1505.0[3d2c800000+dc000] and tracked it down to: commit 03252919b79891063cf99145612360efbdf9500b Author: Andi Kleen <ak@suse.de> Date: Wed Jan 30 13:33:18 2008 +0100 x86: print which shared library/executable faulted in segfault etc. messages the problem is that we call down_read() from an atomic context. Solve this by returning from print_vma_addr() if the preempt count is elevated. Update preempt_conditional_sti / preempt_conditional_cli to unconditionally lift the preempt count even on !CONFIG_PREEMPT. Reported-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 19:21:06 +00:00
*/
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
if (!mmap_read_trylock(mm))
x86: fix "BUG: sleeping function called from invalid context" in print_vma_addr() Jiri Kosina reported the following deadlock scenario with show_unhandled_signals enabled: [ 68.379022] gnome-settings-[2941] trap int3 ip:3d2c840f34 sp:7fff36f5d100 error:0<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:21 [ 68.379039] in_atomic():1, irqs_disabled():0 [ 68.379044] no locks held by gnome-settings-/2941. [ 68.379050] Pid: 2941, comm: gnome-settings- Not tainted 2.6.25-rc1 #30 [ 68.379054] [ 68.379056] Call Trace: [ 68.379061] <#DB> [<ffffffff81064883>] ? __debug_show_held_locks+0x13/0x30 [ 68.379109] [<ffffffff81036765>] __might_sleep+0xe5/0x110 [ 68.379123] [<ffffffff812f2240>] down_read+0x20/0x70 [ 68.379137] [<ffffffff8109cdca>] print_vma_addr+0x3a/0x110 [ 68.379152] [<ffffffff8100f435>] do_trap+0xf5/0x170 [ 68.379168] [<ffffffff8100f52b>] do_int3+0x7b/0xe0 [ 68.379180] [<ffffffff812f4a6f>] int3+0x9f/0xd0 [ 68.379203] <<EOE>> [ 68.379229] in libglib-2.0.so.0.1505.0[3d2c800000+dc000] and tracked it down to: commit 03252919b79891063cf99145612360efbdf9500b Author: Andi Kleen <ak@suse.de> Date: Wed Jan 30 13:33:18 2008 +0100 x86: print which shared library/executable faulted in segfault etc. messages the problem is that we call down_read() from an atomic context. Solve this by returning from print_vma_addr() if the preempt count is elevated. Update preempt_conditional_sti / preempt_conditional_cli to unconditionally lift the preempt count even on !CONFIG_PREEMPT. Reported-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 19:21:06 +00:00
return;
vma = vma_lookup(mm, ip);
if (vma && vma->vm_file) {
struct file *f = vma->vm_file;
ip -= vma->vm_start;
ip += vma->vm_pgoff << PAGE_SHIFT;
printk("%s%pD[%lx,%lx+%lx]", prefix, f, ip,
vma->vm_start,
vma->vm_end - vma->vm_start);
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_read_unlock(mm);
}
#if defined(CONFIG_PROVE_LOCKING) || defined(CONFIG_DEBUG_ATOMIC_SLEEP)
sched/preempt, mm/fault: Trigger might_sleep() in might_fault() with disabled pagefaults Commit 662bbcb2747c ("mm, sched: Allow uaccess in atomic with pagefault_disable()") removed might_sleep() checks for all user access code (that uses might_fault()). The reason was to disable wrong "sleep in atomic" warnings in the following scenario: pagefault_disable() rc = copy_to_user(...) pagefault_enable() Which is valid, as pagefault_disable() increments the preempt counter and therefore disables the pagefault handler. copy_to_user() will not sleep and return an error code if a page is not available. However, as all might_sleep() checks are removed, CONFIG_DEBUG_ATOMIC_SLEEP would no longer detect the following scenario: spin_lock(&lock); rc = copy_to_user(...) spin_unlock(&lock) If the kernel is compiled with preemption turned on, preempt_disable() will make in_atomic() detect disabled preemption. The fault handler would correctly never sleep on user access. However, with preemption turned off, preempt_disable() is usually a NOP (with !CONFIG_PREEMPT_COUNT), therefore in_atomic() will not be able to detect disabled preemption nor disabled pagefaults. The fault handler could sleep. We really want to enable CONFIG_DEBUG_ATOMIC_SLEEP checks for user access functions again, otherwise we can end up with horrible deadlocks. Root of all evil is that pagefault_disable() acts almost as preempt_disable(), depending on preemption being turned on/off. As we now have pagefault_disabled(), we can use it to distinguish whether user acces functions might sleep. Convert might_fault() into a makro that calls __might_fault(), to allow proper file + line messages in case of a might_sleep() warning. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-3-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 15:52:07 +00:00
void __might_fault(const char *file, int line)
{
sched/preempt, mm/fault: Trigger might_sleep() in might_fault() with disabled pagefaults Commit 662bbcb2747c ("mm, sched: Allow uaccess in atomic with pagefault_disable()") removed might_sleep() checks for all user access code (that uses might_fault()). The reason was to disable wrong "sleep in atomic" warnings in the following scenario: pagefault_disable() rc = copy_to_user(...) pagefault_enable() Which is valid, as pagefault_disable() increments the preempt counter and therefore disables the pagefault handler. copy_to_user() will not sleep and return an error code if a page is not available. However, as all might_sleep() checks are removed, CONFIG_DEBUG_ATOMIC_SLEEP would no longer detect the following scenario: spin_lock(&lock); rc = copy_to_user(...) spin_unlock(&lock) If the kernel is compiled with preemption turned on, preempt_disable() will make in_atomic() detect disabled preemption. The fault handler would correctly never sleep on user access. However, with preemption turned off, preempt_disable() is usually a NOP (with !CONFIG_PREEMPT_COUNT), therefore in_atomic() will not be able to detect disabled preemption nor disabled pagefaults. The fault handler could sleep. We really want to enable CONFIG_DEBUG_ATOMIC_SLEEP checks for user access functions again, otherwise we can end up with horrible deadlocks. Root of all evil is that pagefault_disable() acts almost as preempt_disable(), depending on preemption being turned on/off. As we now have pagefault_disabled(), we can use it to distinguish whether user acces functions might sleep. Convert might_fault() into a makro that calls __might_fault(), to allow proper file + line messages in case of a might_sleep() warning. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-3-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 15:52:07 +00:00
if (pagefault_disabled())
return;
__might_sleep(file, line);
sched/preempt, mm/fault: Trigger might_sleep() in might_fault() with disabled pagefaults Commit 662bbcb2747c ("mm, sched: Allow uaccess in atomic with pagefault_disable()") removed might_sleep() checks for all user access code (that uses might_fault()). The reason was to disable wrong "sleep in atomic" warnings in the following scenario: pagefault_disable() rc = copy_to_user(...) pagefault_enable() Which is valid, as pagefault_disable() increments the preempt counter and therefore disables the pagefault handler. copy_to_user() will not sleep and return an error code if a page is not available. However, as all might_sleep() checks are removed, CONFIG_DEBUG_ATOMIC_SLEEP would no longer detect the following scenario: spin_lock(&lock); rc = copy_to_user(...) spin_unlock(&lock) If the kernel is compiled with preemption turned on, preempt_disable() will make in_atomic() detect disabled preemption. The fault handler would correctly never sleep on user access. However, with preemption turned off, preempt_disable() is usually a NOP (with !CONFIG_PREEMPT_COUNT), therefore in_atomic() will not be able to detect disabled preemption nor disabled pagefaults. The fault handler could sleep. We really want to enable CONFIG_DEBUG_ATOMIC_SLEEP checks for user access functions again, otherwise we can end up with horrible deadlocks. Root of all evil is that pagefault_disable() acts almost as preempt_disable(), depending on preemption being turned on/off. As we now have pagefault_disabled(), we can use it to distinguish whether user acces functions might sleep. Convert might_fault() into a makro that calls __might_fault(), to allow proper file + line messages in case of a might_sleep() warning. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-3-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 15:52:07 +00:00
#if defined(CONFIG_DEBUG_ATOMIC_SLEEP)
if (current->mm)
might_lock_read(&current->mm->mmap_lock);
sched/preempt, mm/fault: Trigger might_sleep() in might_fault() with disabled pagefaults Commit 662bbcb2747c ("mm, sched: Allow uaccess in atomic with pagefault_disable()") removed might_sleep() checks for all user access code (that uses might_fault()). The reason was to disable wrong "sleep in atomic" warnings in the following scenario: pagefault_disable() rc = copy_to_user(...) pagefault_enable() Which is valid, as pagefault_disable() increments the preempt counter and therefore disables the pagefault handler. copy_to_user() will not sleep and return an error code if a page is not available. However, as all might_sleep() checks are removed, CONFIG_DEBUG_ATOMIC_SLEEP would no longer detect the following scenario: spin_lock(&lock); rc = copy_to_user(...) spin_unlock(&lock) If the kernel is compiled with preemption turned on, preempt_disable() will make in_atomic() detect disabled preemption. The fault handler would correctly never sleep on user access. However, with preemption turned off, preempt_disable() is usually a NOP (with !CONFIG_PREEMPT_COUNT), therefore in_atomic() will not be able to detect disabled preemption nor disabled pagefaults. The fault handler could sleep. We really want to enable CONFIG_DEBUG_ATOMIC_SLEEP checks for user access functions again, otherwise we can end up with horrible deadlocks. Root of all evil is that pagefault_disable() acts almost as preempt_disable(), depending on preemption being turned on/off. As we now have pagefault_disabled(), we can use it to distinguish whether user acces functions might sleep. Convert might_fault() into a makro that calls __might_fault(), to allow proper file + line messages in case of a might_sleep() warning. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-3-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 15:52:07 +00:00
#endif
}
sched/preempt, mm/fault: Trigger might_sleep() in might_fault() with disabled pagefaults Commit 662bbcb2747c ("mm, sched: Allow uaccess in atomic with pagefault_disable()") removed might_sleep() checks for all user access code (that uses might_fault()). The reason was to disable wrong "sleep in atomic" warnings in the following scenario: pagefault_disable() rc = copy_to_user(...) pagefault_enable() Which is valid, as pagefault_disable() increments the preempt counter and therefore disables the pagefault handler. copy_to_user() will not sleep and return an error code if a page is not available. However, as all might_sleep() checks are removed, CONFIG_DEBUG_ATOMIC_SLEEP would no longer detect the following scenario: spin_lock(&lock); rc = copy_to_user(...) spin_unlock(&lock) If the kernel is compiled with preemption turned on, preempt_disable() will make in_atomic() detect disabled preemption. The fault handler would correctly never sleep on user access. However, with preemption turned off, preempt_disable() is usually a NOP (with !CONFIG_PREEMPT_COUNT), therefore in_atomic() will not be able to detect disabled preemption nor disabled pagefaults. The fault handler could sleep. We really want to enable CONFIG_DEBUG_ATOMIC_SLEEP checks for user access functions again, otherwise we can end up with horrible deadlocks. Root of all evil is that pagefault_disable() acts almost as preempt_disable(), depending on preemption being turned on/off. As we now have pagefault_disabled(), we can use it to distinguish whether user acces functions might sleep. Convert might_fault() into a makro that calls __might_fault(), to allow proper file + line messages in case of a might_sleep() warning. Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-3-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 15:52:07 +00:00
EXPORT_SYMBOL(__might_fault);
#endif
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLBFS)
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
/*
* Process all subpages of the specified huge page with the specified
* operation. The target subpage will be processed last to keep its
* cache lines hot.
*/
static inline int process_huge_page(
unsigned long addr_hint, unsigned int nr_pages,
int (*process_subpage)(unsigned long addr, int idx, void *arg),
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
void *arg)
{
int i, n, base, l, ret;
mm: hugetlb: clear target sub-page last when clearing huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when clearing huge page on x86_64 platform, the cache footprint is 2M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache pressure is heavy when clearing the huge page, and we clear the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing clearing the end of the huge page. And it is possible for the application to access the begin of the huge page after clearing the huge page. To help the above situation, in this patch, when we clear a huge page, the order to clear sub-pages is changed. In quite some situation, we can get the address that the application will access after we clear the huge page, for example, in a page fault handler. Instead of clearing the huge page from begin to end, we will clear the sub-pages farthest from the the sub-page to access firstly, and clear the sub-page to access last. This will make the sub-page to access most cache-hot and sub-pages around it more cache-hot too. If we cannot know the address the application will access, the begin of the huge page is assumed to be the the address the application will access. With this patch, the throughput increases ~28.3% in vm-scalability anon-w-seq test case with 72 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case creates 72 processes, each process mmap a big anonymous memory area and writes to it from the begin to the end. For each process, other processes could be seen as other workload which generates heavy cache pressure. At the same time, the cache miss rate reduced from ~33.4% to ~31.7%, the IPC (instruction per cycle) increased from 0.56 to 0.74, and the time spent in user space is reduced ~7.9% Christopher Lameter suggests to clear bytes inside a sub-page from end to begin too. But tests show no visible performance difference in the tests. May because the size of page is small compared with the cache size. Thanks Andi Kleen to propose to use address to access to determine the order of sub-pages to clear. The hugetlbfs access address could be improved, will do that in another patch. [ying.huang@intel.com: improve readability of clear_huge_page()] Link: http://lkml.kernel.org/r/20170830051842.1397-1-ying.huang@intel.com Link: http://lkml.kernel.org/r/20170815014618.15842-1-ying.huang@intel.com Suggested-by: Andi Kleen <andi.kleen@intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:04 +00:00
unsigned long addr = addr_hint &
~(((unsigned long)nr_pages << PAGE_SHIFT) - 1);
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
/* Process target subpage last to keep its cache lines hot */
might_sleep();
mm: hugetlb: clear target sub-page last when clearing huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when clearing huge page on x86_64 platform, the cache footprint is 2M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache pressure is heavy when clearing the huge page, and we clear the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing clearing the end of the huge page. And it is possible for the application to access the begin of the huge page after clearing the huge page. To help the above situation, in this patch, when we clear a huge page, the order to clear sub-pages is changed. In quite some situation, we can get the address that the application will access after we clear the huge page, for example, in a page fault handler. Instead of clearing the huge page from begin to end, we will clear the sub-pages farthest from the the sub-page to access firstly, and clear the sub-page to access last. This will make the sub-page to access most cache-hot and sub-pages around it more cache-hot too. If we cannot know the address the application will access, the begin of the huge page is assumed to be the the address the application will access. With this patch, the throughput increases ~28.3% in vm-scalability anon-w-seq test case with 72 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case creates 72 processes, each process mmap a big anonymous memory area and writes to it from the begin to the end. For each process, other processes could be seen as other workload which generates heavy cache pressure. At the same time, the cache miss rate reduced from ~33.4% to ~31.7%, the IPC (instruction per cycle) increased from 0.56 to 0.74, and the time spent in user space is reduced ~7.9% Christopher Lameter suggests to clear bytes inside a sub-page from end to begin too. But tests show no visible performance difference in the tests. May because the size of page is small compared with the cache size. Thanks Andi Kleen to propose to use address to access to determine the order of sub-pages to clear. The hugetlbfs access address could be improved, will do that in another patch. [ying.huang@intel.com: improve readability of clear_huge_page()] Link: http://lkml.kernel.org/r/20170830051842.1397-1-ying.huang@intel.com Link: http://lkml.kernel.org/r/20170815014618.15842-1-ying.huang@intel.com Suggested-by: Andi Kleen <andi.kleen@intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:04 +00:00
n = (addr_hint - addr) / PAGE_SIZE;
if (2 * n <= nr_pages) {
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
/* If target subpage in first half of huge page */
mm: hugetlb: clear target sub-page last when clearing huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when clearing huge page on x86_64 platform, the cache footprint is 2M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache pressure is heavy when clearing the huge page, and we clear the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing clearing the end of the huge page. And it is possible for the application to access the begin of the huge page after clearing the huge page. To help the above situation, in this patch, when we clear a huge page, the order to clear sub-pages is changed. In quite some situation, we can get the address that the application will access after we clear the huge page, for example, in a page fault handler. Instead of clearing the huge page from begin to end, we will clear the sub-pages farthest from the the sub-page to access firstly, and clear the sub-page to access last. This will make the sub-page to access most cache-hot and sub-pages around it more cache-hot too. If we cannot know the address the application will access, the begin of the huge page is assumed to be the the address the application will access. With this patch, the throughput increases ~28.3% in vm-scalability anon-w-seq test case with 72 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case creates 72 processes, each process mmap a big anonymous memory area and writes to it from the begin to the end. For each process, other processes could be seen as other workload which generates heavy cache pressure. At the same time, the cache miss rate reduced from ~33.4% to ~31.7%, the IPC (instruction per cycle) increased from 0.56 to 0.74, and the time spent in user space is reduced ~7.9% Christopher Lameter suggests to clear bytes inside a sub-page from end to begin too. But tests show no visible performance difference in the tests. May because the size of page is small compared with the cache size. Thanks Andi Kleen to propose to use address to access to determine the order of sub-pages to clear. The hugetlbfs access address could be improved, will do that in another patch. [ying.huang@intel.com: improve readability of clear_huge_page()] Link: http://lkml.kernel.org/r/20170830051842.1397-1-ying.huang@intel.com Link: http://lkml.kernel.org/r/20170815014618.15842-1-ying.huang@intel.com Suggested-by: Andi Kleen <andi.kleen@intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:04 +00:00
base = 0;
l = n;
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
/* Process subpages at the end of huge page */
for (i = nr_pages - 1; i >= 2 * n; i--) {
mm: hugetlb: clear target sub-page last when clearing huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when clearing huge page on x86_64 platform, the cache footprint is 2M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache pressure is heavy when clearing the huge page, and we clear the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing clearing the end of the huge page. And it is possible for the application to access the begin of the huge page after clearing the huge page. To help the above situation, in this patch, when we clear a huge page, the order to clear sub-pages is changed. In quite some situation, we can get the address that the application will access after we clear the huge page, for example, in a page fault handler. Instead of clearing the huge page from begin to end, we will clear the sub-pages farthest from the the sub-page to access firstly, and clear the sub-page to access last. This will make the sub-page to access most cache-hot and sub-pages around it more cache-hot too. If we cannot know the address the application will access, the begin of the huge page is assumed to be the the address the application will access. With this patch, the throughput increases ~28.3% in vm-scalability anon-w-seq test case with 72 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case creates 72 processes, each process mmap a big anonymous memory area and writes to it from the begin to the end. For each process, other processes could be seen as other workload which generates heavy cache pressure. At the same time, the cache miss rate reduced from ~33.4% to ~31.7%, the IPC (instruction per cycle) increased from 0.56 to 0.74, and the time spent in user space is reduced ~7.9% Christopher Lameter suggests to clear bytes inside a sub-page from end to begin too. But tests show no visible performance difference in the tests. May because the size of page is small compared with the cache size. Thanks Andi Kleen to propose to use address to access to determine the order of sub-pages to clear. The hugetlbfs access address could be improved, will do that in another patch. [ying.huang@intel.com: improve readability of clear_huge_page()] Link: http://lkml.kernel.org/r/20170830051842.1397-1-ying.huang@intel.com Link: http://lkml.kernel.org/r/20170815014618.15842-1-ying.huang@intel.com Suggested-by: Andi Kleen <andi.kleen@intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:04 +00:00
cond_resched();
ret = process_subpage(addr + i * PAGE_SIZE, i, arg);
if (ret)
return ret;
mm: hugetlb: clear target sub-page last when clearing huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when clearing huge page on x86_64 platform, the cache footprint is 2M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache pressure is heavy when clearing the huge page, and we clear the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing clearing the end of the huge page. And it is possible for the application to access the begin of the huge page after clearing the huge page. To help the above situation, in this patch, when we clear a huge page, the order to clear sub-pages is changed. In quite some situation, we can get the address that the application will access after we clear the huge page, for example, in a page fault handler. Instead of clearing the huge page from begin to end, we will clear the sub-pages farthest from the the sub-page to access firstly, and clear the sub-page to access last. This will make the sub-page to access most cache-hot and sub-pages around it more cache-hot too. If we cannot know the address the application will access, the begin of the huge page is assumed to be the the address the application will access. With this patch, the throughput increases ~28.3% in vm-scalability anon-w-seq test case with 72 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case creates 72 processes, each process mmap a big anonymous memory area and writes to it from the begin to the end. For each process, other processes could be seen as other workload which generates heavy cache pressure. At the same time, the cache miss rate reduced from ~33.4% to ~31.7%, the IPC (instruction per cycle) increased from 0.56 to 0.74, and the time spent in user space is reduced ~7.9% Christopher Lameter suggests to clear bytes inside a sub-page from end to begin too. But tests show no visible performance difference in the tests. May because the size of page is small compared with the cache size. Thanks Andi Kleen to propose to use address to access to determine the order of sub-pages to clear. The hugetlbfs access address could be improved, will do that in another patch. [ying.huang@intel.com: improve readability of clear_huge_page()] Link: http://lkml.kernel.org/r/20170830051842.1397-1-ying.huang@intel.com Link: http://lkml.kernel.org/r/20170815014618.15842-1-ying.huang@intel.com Suggested-by: Andi Kleen <andi.kleen@intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:04 +00:00
}
} else {
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
/* If target subpage in second half of huge page */
base = nr_pages - 2 * (nr_pages - n);
l = nr_pages - n;
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
/* Process subpages at the begin of huge page */
mm: hugetlb: clear target sub-page last when clearing huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when clearing huge page on x86_64 platform, the cache footprint is 2M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache pressure is heavy when clearing the huge page, and we clear the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing clearing the end of the huge page. And it is possible for the application to access the begin of the huge page after clearing the huge page. To help the above situation, in this patch, when we clear a huge page, the order to clear sub-pages is changed. In quite some situation, we can get the address that the application will access after we clear the huge page, for example, in a page fault handler. Instead of clearing the huge page from begin to end, we will clear the sub-pages farthest from the the sub-page to access firstly, and clear the sub-page to access last. This will make the sub-page to access most cache-hot and sub-pages around it more cache-hot too. If we cannot know the address the application will access, the begin of the huge page is assumed to be the the address the application will access. With this patch, the throughput increases ~28.3% in vm-scalability anon-w-seq test case with 72 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case creates 72 processes, each process mmap a big anonymous memory area and writes to it from the begin to the end. For each process, other processes could be seen as other workload which generates heavy cache pressure. At the same time, the cache miss rate reduced from ~33.4% to ~31.7%, the IPC (instruction per cycle) increased from 0.56 to 0.74, and the time spent in user space is reduced ~7.9% Christopher Lameter suggests to clear bytes inside a sub-page from end to begin too. But tests show no visible performance difference in the tests. May because the size of page is small compared with the cache size. Thanks Andi Kleen to propose to use address to access to determine the order of sub-pages to clear. The hugetlbfs access address could be improved, will do that in another patch. [ying.huang@intel.com: improve readability of clear_huge_page()] Link: http://lkml.kernel.org/r/20170830051842.1397-1-ying.huang@intel.com Link: http://lkml.kernel.org/r/20170815014618.15842-1-ying.huang@intel.com Suggested-by: Andi Kleen <andi.kleen@intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:04 +00:00
for (i = 0; i < base; i++) {
cond_resched();
ret = process_subpage(addr + i * PAGE_SIZE, i, arg);
if (ret)
return ret;
mm: hugetlb: clear target sub-page last when clearing huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when clearing huge page on x86_64 platform, the cache footprint is 2M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache pressure is heavy when clearing the huge page, and we clear the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing clearing the end of the huge page. And it is possible for the application to access the begin of the huge page after clearing the huge page. To help the above situation, in this patch, when we clear a huge page, the order to clear sub-pages is changed. In quite some situation, we can get the address that the application will access after we clear the huge page, for example, in a page fault handler. Instead of clearing the huge page from begin to end, we will clear the sub-pages farthest from the the sub-page to access firstly, and clear the sub-page to access last. This will make the sub-page to access most cache-hot and sub-pages around it more cache-hot too. If we cannot know the address the application will access, the begin of the huge page is assumed to be the the address the application will access. With this patch, the throughput increases ~28.3% in vm-scalability anon-w-seq test case with 72 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case creates 72 processes, each process mmap a big anonymous memory area and writes to it from the begin to the end. For each process, other processes could be seen as other workload which generates heavy cache pressure. At the same time, the cache miss rate reduced from ~33.4% to ~31.7%, the IPC (instruction per cycle) increased from 0.56 to 0.74, and the time spent in user space is reduced ~7.9% Christopher Lameter suggests to clear bytes inside a sub-page from end to begin too. But tests show no visible performance difference in the tests. May because the size of page is small compared with the cache size. Thanks Andi Kleen to propose to use address to access to determine the order of sub-pages to clear. The hugetlbfs access address could be improved, will do that in another patch. [ying.huang@intel.com: improve readability of clear_huge_page()] Link: http://lkml.kernel.org/r/20170830051842.1397-1-ying.huang@intel.com Link: http://lkml.kernel.org/r/20170815014618.15842-1-ying.huang@intel.com Suggested-by: Andi Kleen <andi.kleen@intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:04 +00:00
}
}
/*
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
* Process remaining subpages in left-right-left-right pattern
* towards the target subpage
mm: hugetlb: clear target sub-page last when clearing huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when clearing huge page on x86_64 platform, the cache footprint is 2M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache pressure is heavy when clearing the huge page, and we clear the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing clearing the end of the huge page. And it is possible for the application to access the begin of the huge page after clearing the huge page. To help the above situation, in this patch, when we clear a huge page, the order to clear sub-pages is changed. In quite some situation, we can get the address that the application will access after we clear the huge page, for example, in a page fault handler. Instead of clearing the huge page from begin to end, we will clear the sub-pages farthest from the the sub-page to access firstly, and clear the sub-page to access last. This will make the sub-page to access most cache-hot and sub-pages around it more cache-hot too. If we cannot know the address the application will access, the begin of the huge page is assumed to be the the address the application will access. With this patch, the throughput increases ~28.3% in vm-scalability anon-w-seq test case with 72 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case creates 72 processes, each process mmap a big anonymous memory area and writes to it from the begin to the end. For each process, other processes could be seen as other workload which generates heavy cache pressure. At the same time, the cache miss rate reduced from ~33.4% to ~31.7%, the IPC (instruction per cycle) increased from 0.56 to 0.74, and the time spent in user space is reduced ~7.9% Christopher Lameter suggests to clear bytes inside a sub-page from end to begin too. But tests show no visible performance difference in the tests. May because the size of page is small compared with the cache size. Thanks Andi Kleen to propose to use address to access to determine the order of sub-pages to clear. The hugetlbfs access address could be improved, will do that in another patch. [ying.huang@intel.com: improve readability of clear_huge_page()] Link: http://lkml.kernel.org/r/20170830051842.1397-1-ying.huang@intel.com Link: http://lkml.kernel.org/r/20170815014618.15842-1-ying.huang@intel.com Suggested-by: Andi Kleen <andi.kleen@intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:25:04 +00:00
*/
for (i = 0; i < l; i++) {
int left_idx = base + i;
int right_idx = base + 2 * l - 1 - i;
cond_resched();
ret = process_subpage(addr + left_idx * PAGE_SIZE, left_idx, arg);
if (ret)
return ret;
cond_resched();
ret = process_subpage(addr + right_idx * PAGE_SIZE, right_idx, arg);
if (ret)
return ret;
}
return 0;
}
static void clear_gigantic_page(struct folio *folio, unsigned long addr,
unsigned int nr_pages)
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
{
int i;
might_sleep();
for (i = 0; i < nr_pages; i++) {
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
cond_resched();
clear_user_highpage(folio_page(folio, i), addr + i * PAGE_SIZE);
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
}
}
static int clear_subpage(unsigned long addr, int idx, void *arg)
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
{
struct folio *folio = arg;
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
clear_user_highpage(folio_page(folio, idx), addr);
return 0;
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
}
/**
* folio_zero_user - Zero a folio which will be mapped to userspace.
* @folio: The folio to zero.
* @addr_hint: The address will be accessed or the base address if uncelar.
*/
void folio_zero_user(struct folio *folio, unsigned long addr_hint)
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
{
unsigned int nr_pages = folio_nr_pages(folio);
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
if (unlikely(nr_pages > MAX_ORDER_NR_PAGES))
clear_gigantic_page(folio, addr_hint, nr_pages);
else
process_huge_page(addr_hint, nr_pages, clear_subpage, folio);
mm, clear_huge_page: move order algorithm into a separate function Patch series "mm, huge page: Copy target sub-page last when copy huge page", v2. Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patchset. The patchset is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patchset, we have tested it with vm-scalability run on transparent huge page. With this patchset, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. This patch (of 4): In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. This optimization could be applied to copying huge page too with the same order algorithm. To avoid code duplication and reduce maintenance overhead, in this patch, the order algorithm is moved out of clear_huge_page() into a separate function: process_huge_page(). So that we can use it for copying huge page too. This will change the direct calls to clear_user_highpage() into the indirect calls. But with the proper inline support of the compilers, the indirect call will be optimized to be the direct call. Our tests show no performance change with the patch. This patch is a code cleanup without functionality change. Link: http://lkml.kernel.org/r/20180524005851.4079-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:46 +00:00
}
static int copy_user_gigantic_page(struct folio *dst, struct folio *src,
unsigned long addr,
struct vm_area_struct *vma,
unsigned int nr_pages)
{
int i;
struct page *dst_page;
struct page *src_page;
for (i = 0; i < nr_pages; i++) {
dst_page = folio_page(dst, i);
src_page = folio_page(src, i);
cond_resched();
if (copy_mc_user_highpage(dst_page, src_page,
mm: move memory_failure_queue() into copy_mc_[user]_highpage() Patch series "mm: migrate: support poison recover from migrate folio", v5. The folio migration is widely used in kernel, memory compaction, memory hotplug, soft offline page, numa balance, memory demote/promotion, etc, but once access a poisoned source folio when migrating, the kernel will panic. There is a mechanism in the kernel to recover from uncorrectable memory errors, ARCH_HAS_COPY_MC(eg, Machine Check Safe Memory Copy on x86), which is already used in NVDIMM or core-mm paths(eg, CoW, khugepaged, coredump, ksm copy), see copy_mc_to_{user,kernel}, copy_mc_{user_}highpage callers. This series of patches provide the recovery mechanism from folio copy for the widely used folio migration. Please note, because folio migration is no guarantee of success, so we could chose to make folio migration tolerant of memory failures, adding folio_mc_copy() which is a #MC versions of folio_copy(), once accessing a poisoned source folio, we could return error and make the folio migration fail, and this could avoid the similar panic shown below. CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0 pc : copy_page+0x10/0xc0 lr : copy_highpage+0x38/0x50 ... Call trace: copy_page+0x10/0xc0 folio_copy+0x78/0x90 migrate_folio_extra+0x54/0xa0 move_to_new_folio+0xd8/0x1f0 migrate_folio_move+0xb8/0x300 migrate_pages_batch+0x528/0x788 migrate_pages_sync+0x8c/0x258 migrate_pages+0x440/0x528 soft_offline_in_use_page+0x2ec/0x3c0 soft_offline_page+0x238/0x310 soft_offline_page_store+0x6c/0xc0 dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x130/0x1c8 new_sync_write+0xa4/0x138 vfs_write+0x238/0x2d8 ksys_write+0x74/0x110 This patch (of 5): There is a memory_failure_queue() call after copy_mc_[user]_highpage(), see callers, eg, CoW/KSM page copy, it is used to mark the source page as h/w poisoned and unmap it from other tasks, and the upcomming poison recover from migrate folio will do the similar thing, so let's move the memory_failure_queue() into the copy_mc_[user]_highpage() instead of adding it into each user, this should also enhance the handling of poisoned page in khugepaged. Link: https://lkml.kernel.org/r/20240626085328.608006-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240626085328.608006-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 08:53:23 +00:00
addr + i*PAGE_SIZE, vma))
return -EHWPOISON;
}
return 0;
}
mm, huge page: copy target sub-page last when copy huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patch. Because we have put the order algorithm into a separate function, the implementation is quite simple. The patch is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patch, we tested it with vm-scalability run on transparent huge page. With this patch, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. Link: http://lkml.kernel.org/r/20180524005851.4079-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:49 +00:00
struct copy_subpage_arg {
struct folio *dst;
struct folio *src;
mm, huge page: copy target sub-page last when copy huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patch. Because we have put the order algorithm into a separate function, the implementation is quite simple. The patch is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patch, we tested it with vm-scalability run on transparent huge page. With this patch, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. Link: http://lkml.kernel.org/r/20180524005851.4079-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:49 +00:00
struct vm_area_struct *vma;
};
static int copy_subpage(unsigned long addr, int idx, void *arg)
mm, huge page: copy target sub-page last when copy huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patch. Because we have put the order algorithm into a separate function, the implementation is quite simple. The patch is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patch, we tested it with vm-scalability run on transparent huge page. With this patch, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. Link: http://lkml.kernel.org/r/20180524005851.4079-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:49 +00:00
{
struct copy_subpage_arg *copy_arg = arg;
struct page *dst = folio_page(copy_arg->dst, idx);
struct page *src = folio_page(copy_arg->src, idx);
mm, huge page: copy target sub-page last when copy huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patch. Because we have put the order algorithm into a separate function, the implementation is quite simple. The patch is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patch, we tested it with vm-scalability run on transparent huge page. With this patch, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. Link: http://lkml.kernel.org/r/20180524005851.4079-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:49 +00:00
mm: move memory_failure_queue() into copy_mc_[user]_highpage() Patch series "mm: migrate: support poison recover from migrate folio", v5. The folio migration is widely used in kernel, memory compaction, memory hotplug, soft offline page, numa balance, memory demote/promotion, etc, but once access a poisoned source folio when migrating, the kernel will panic. There is a mechanism in the kernel to recover from uncorrectable memory errors, ARCH_HAS_COPY_MC(eg, Machine Check Safe Memory Copy on x86), which is already used in NVDIMM or core-mm paths(eg, CoW, khugepaged, coredump, ksm copy), see copy_mc_to_{user,kernel}, copy_mc_{user_}highpage callers. This series of patches provide the recovery mechanism from folio copy for the widely used folio migration. Please note, because folio migration is no guarantee of success, so we could chose to make folio migration tolerant of memory failures, adding folio_mc_copy() which is a #MC versions of folio_copy(), once accessing a poisoned source folio, we could return error and make the folio migration fail, and this could avoid the similar panic shown below. CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0 pc : copy_page+0x10/0xc0 lr : copy_highpage+0x38/0x50 ... Call trace: copy_page+0x10/0xc0 folio_copy+0x78/0x90 migrate_folio_extra+0x54/0xa0 move_to_new_folio+0xd8/0x1f0 migrate_folio_move+0xb8/0x300 migrate_pages_batch+0x528/0x788 migrate_pages_sync+0x8c/0x258 migrate_pages+0x440/0x528 soft_offline_in_use_page+0x2ec/0x3c0 soft_offline_page+0x238/0x310 soft_offline_page_store+0x6c/0xc0 dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x130/0x1c8 new_sync_write+0xa4/0x138 vfs_write+0x238/0x2d8 ksys_write+0x74/0x110 This patch (of 5): There is a memory_failure_queue() call after copy_mc_[user]_highpage(), see callers, eg, CoW/KSM page copy, it is used to mark the source page as h/w poisoned and unmap it from other tasks, and the upcomming poison recover from migrate folio will do the similar thing, so let's move the memory_failure_queue() into the copy_mc_[user]_highpage() instead of adding it into each user, this should also enhance the handling of poisoned page in khugepaged. Link: https://lkml.kernel.org/r/20240626085328.608006-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240626085328.608006-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 08:53:23 +00:00
if (copy_mc_user_highpage(dst, src, addr, copy_arg->vma))
return -EHWPOISON;
return 0;
mm, huge page: copy target sub-page last when copy huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patch. Because we have put the order algorithm into a separate function, the implementation is quite simple. The patch is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patch, we tested it with vm-scalability run on transparent huge page. With this patch, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. Link: http://lkml.kernel.org/r/20180524005851.4079-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:49 +00:00
}
int copy_user_large_folio(struct folio *dst, struct folio *src,
unsigned long addr_hint, struct vm_area_struct *vma)
{
unsigned int nr_pages = folio_nr_pages(dst);
mm, huge page: copy target sub-page last when copy huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patch. Because we have put the order algorithm into a separate function, the implementation is quite simple. The patch is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patch, we tested it with vm-scalability run on transparent huge page. With this patch, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. Link: http://lkml.kernel.org/r/20180524005851.4079-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:49 +00:00
struct copy_subpage_arg arg = {
.dst = dst,
.src = src,
mm, huge page: copy target sub-page last when copy huge page Huge page helps to reduce TLB miss rate, but it has higher cache footprint, sometimes this may cause some issue. For example, when copying huge page on x86_64 platform, the cache footprint is 4M. But on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M LLC (last level cache). That is, in average, there are 2.5M LLC for each core and 1.25M LLC for each thread. If the cache contention is heavy when copying the huge page, and we copy the huge page from the begin to the end, it is possible that the begin of huge page is evicted from the cache after we finishing copying the end of the huge page. And it is possible for the application to access the begin of the huge page after copying the huge page. In c79b57e462b5d ("mm: hugetlb: clear target sub-page last when clearing huge page"), to keep the cache lines of the target subpage hot, the order to clear the subpages in the huge page in clear_huge_page() is changed to clearing the subpage which is furthest from the target subpage firstly, and the target subpage last. The similar order changing helps huge page copying too. That is implemented in this patch. Because we have put the order algorithm into a separate function, the implementation is quite simple. The patch is a generic optimization which should benefit quite some workloads, not for a specific use case. To demonstrate the performance benefit of the patch, we tested it with vm-scalability run on transparent huge page. With this patch, the throughput increases ~16.6% in vm-scalability anon-cow-seq test case with 36 processes on a 2 socket Xeon E5 v3 2699 system (36 cores, 72 threads). The test case set /sys/kernel/mm/transparent_hugepage/enabled to be always, mmap() a big anonymous memory area and populate it, then forked 36 child processes, each writes to the anonymous memory area from the begin to the end, so cause copy on write. For each child process, other child processes could be seen as other workloads which generate heavy cache pressure. At the same time, the IPC (instruction per cycle) increased from 0.63 to 0.78, and the time spent in user space is reduced ~7.2%. Link: http://lkml.kernel.org/r/20180524005851.4079-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Christopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:45:49 +00:00
.vma = vma,
};
if (unlikely(nr_pages > MAX_ORDER_NR_PAGES))
return copy_user_gigantic_page(dst, src, addr_hint, vma, nr_pages);
return process_huge_page(addr_hint, nr_pages, copy_subpage, &arg);
}
long copy_folio_from_user(struct folio *dst_folio,
const void __user *usr_src,
bool allow_pagefault)
{
void *kaddr;
unsigned long i, rc = 0;
unsigned int nr_pages = folio_nr_pages(dst_folio);
unsigned long ret_val = nr_pages * PAGE_SIZE;
struct page *subpage;
for (i = 0; i < nr_pages; i++) {
subpage = folio_page(dst_folio, i);
kaddr = kmap_local_page(subpage);
if (!allow_pagefault)
pagefault_disable();
rc = copy_from_user(kaddr, usr_src + i * PAGE_SIZE, PAGE_SIZE);
if (!allow_pagefault)
pagefault_enable();
kunmap_local(kaddr);
ret_val -= (PAGE_SIZE - rc);
if (rc)
break;
flush_dcache_page(subpage);
cond_resched();
}
return ret_val;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_HUGETLBFS */
mm: turn USE_SPLIT_PTE_PTLOCKS / USE_SPLIT_PTE_PTLOCKS into Kconfig options Patch series "mm: split PTE/PMD PT table Kconfig cleanups+clarifications". This series is a follow up to the fixes: "[PATCH v1 0/2] mm/hugetlb: fix hugetlb vs. core-mm PT locking" When working on the fixes, I wondered why 8xx is fine (-> never uses split PT locks) and how PT locking even works properly with PMD page table sharing (-> always requires split PMD PT locks). Let's improve the split PT lock detection, make hugetlb properly depend on it and make 8xx bail out if it would ever get enabled by accident. As an alternative to patch #3 we could extend the Kconfig SPLIT_PTE_PTLOCKS option from patch #2 -- but enforcing it closer to the code that actually implements it feels a bit nicer for documentation purposes, and there is no need to actually disable it because it should always be disabled (!SMP). Did a bunch of cross-compilations to make sure that split PTE/PMD PT locks are still getting used where we would expect them. [1] https://lkml.kernel.org/r/20240725183955.2268884-1-david@redhat.com This patch (of 3): Let's clean that up a bit and prepare for depending on CONFIG_SPLIT_PMD_PTLOCKS in other Kconfig options. More cleanups would be reasonable (like the arch-specific "depends on" for CONFIG_SPLIT_PTE_PTLOCKS), but we'll leave that for another day. Link: https://lkml.kernel.org/r/20240726150728.3159964-1-david@redhat.com Link: https://lkml.kernel.org/r/20240726150728.3159964-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-26 15:07:26 +00:00
#if defined(CONFIG_SPLIT_PTE_PTLOCKS) && ALLOC_SPLIT_PTLOCKS
static struct kmem_cache *page_ptl_cachep;
void __init ptlock_cache_init(void)
{
page_ptl_cachep = kmem_cache_create("page->ptl", sizeof(spinlock_t), 0,
SLAB_PANIC, NULL);
}
bool ptlock_alloc(struct ptdesc *ptdesc)
{
spinlock_t *ptl;
ptl = kmem_cache_alloc(page_ptl_cachep, GFP_KERNEL);
if (!ptl)
return false;
ptdesc->ptl = ptl;
return true;
}
void ptlock_free(struct ptdesc *ptdesc)
{
kmem_cache_free(page_ptl_cachep, ptdesc->ptl);
}
#endif
mm: introduce vma_pgtable_walk_{begin|end}() Introduce per-vma begin()/end() helpers for pgtable walks. This is a preparation work to merge hugetlb pgtable walkers with generic mm. The helpers need to be called before and after a pgtable walk, will start to be needed if the pgtable walker code supports hugetlb pages. It's a hook point for any type of VMA, but for now only hugetlb uses it to stablize the pgtable pages from getting away (due to possible pmd unsharing). Link: https://lkml.kernel.org/r/20240327152332.950956-5-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Muchun Song <muchun.song@linux.dev> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Jones <andrew.jones@linux.dev> Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-27 15:23:23 +00:00
void vma_pgtable_walk_begin(struct vm_area_struct *vma)
{
if (is_vm_hugetlb_page(vma))
hugetlb_vma_lock_read(vma);
}
void vma_pgtable_walk_end(struct vm_area_struct *vma)
{
if (is_vm_hugetlb_page(vma))
hugetlb_vma_unlock_read(vma);
}