linux/drivers/s390/net/qeth_core.h

1064 lines
29 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright IBM Corp. 2007
* Author(s): Utz Bacher <utz.bacher@de.ibm.com>,
* Frank Pavlic <fpavlic@de.ibm.com>,
* Thomas Spatzier <tspat@de.ibm.com>,
* Frank Blaschka <frank.blaschka@de.ibm.com>
*/
#ifndef __QETH_CORE_H__
#define __QETH_CORE_H__
#include <linux/if.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
#include <linux/ctype.h>
#include <linux/in6.h>
#include <linux/bitops.h>
#include <linux/seq_file.h>
#include <linux/ethtool.h>
#include <linux/hashtable.h>
#include <linux/ip.h>
#include <linux/refcount.h>
#include <net/ipv6.h>
#include <net/if_inet6.h>
#include <net/addrconf.h>
#include <asm/debug.h>
#include <asm/qdio.h>
#include <asm/ccwdev.h>
#include <asm/ccwgroup.h>
#include <asm/sysinfo.h>
#include "qeth_core_mpc.h"
/**
* Debug Facility stuff
*/
enum qeth_dbf_names {
QETH_DBF_SETUP,
QETH_DBF_MSG,
QETH_DBF_CTRL,
QETH_DBF_INFOS /* must be last element */
};
struct qeth_dbf_info {
char name[DEBUG_MAX_NAME_LEN];
int pages;
int areas;
int len;
int level;
struct debug_view *view;
debug_info_t *id;
};
#define QETH_DBF_CTRL_LEN 256
#define QETH_DBF_TEXT(name, level, text) \
debug_text_event(qeth_dbf[QETH_DBF_##name].id, level, text)
#define QETH_DBF_HEX(name, level, addr, len) \
debug_event(qeth_dbf[QETH_DBF_##name].id, level, (void *)(addr), len)
#define QETH_DBF_MESSAGE(level, text...) \
debug_sprintf_event(qeth_dbf[QETH_DBF_MSG].id, level, text)
#define QETH_DBF_TEXT_(name, level, text...) \
qeth_dbf_longtext(qeth_dbf[QETH_DBF_##name].id, level, text)
#define QETH_CARD_TEXT(card, level, text) \
debug_text_event(card->debug, level, text)
#define QETH_CARD_HEX(card, level, addr, len) \
debug_event(card->debug, level, (void *)(addr), len)
#define QETH_CARD_MESSAGE(card, text...) \
debug_sprintf_event(card->debug, level, text)
#define QETH_CARD_TEXT_(card, level, text...) \
qeth_dbf_longtext(card->debug, level, text)
#define SENSE_COMMAND_REJECT_BYTE 0
#define SENSE_COMMAND_REJECT_FLAG 0x80
#define SENSE_RESETTING_EVENT_BYTE 1
#define SENSE_RESETTING_EVENT_FLAG 0x80
/*
* Common IO related definitions
*/
#define CARD_RDEV(card) card->read.ccwdev
#define CARD_WDEV(card) card->write.ccwdev
#define CARD_DDEV(card) card->data.ccwdev
#define CARD_BUS_ID(card) dev_name(&card->gdev->dev)
#define CARD_RDEV_ID(card) dev_name(&card->read.ccwdev->dev)
#define CARD_WDEV_ID(card) dev_name(&card->write.ccwdev->dev)
#define CARD_DDEV_ID(card) dev_name(&card->data.ccwdev->dev)
#define CHANNEL_ID(channel) dev_name(&channel->ccwdev->dev)
/**
* card stuff
*/
struct qeth_perf_stats {
unsigned int bufs_rec;
unsigned int bufs_sent;
unsigned int buf_elements_sent;
unsigned int skbs_sent_pack;
unsigned int bufs_sent_pack;
unsigned int sc_dp_p;
unsigned int sc_p_dp;
/* qdio_cq_handler: number of times called, time spent in */
__u64 cq_start_time;
unsigned int cq_cnt;
unsigned int cq_time;
/* qdio_input_handler: number of times called, time spent in */
__u64 inbound_start_time;
unsigned int inbound_cnt;
unsigned int inbound_time;
/* qeth_send_packet: number of times called, time spent in */
__u64 outbound_start_time;
unsigned int outbound_cnt;
unsigned int outbound_time;
/* qdio_output_handler: number of times called, time spent in */
__u64 outbound_handler_start_time;
unsigned int outbound_handler_cnt;
unsigned int outbound_handler_time;
/* number of calls to and time spent in do_QDIO for inbound queue */
__u64 inbound_do_qdio_start_time;
unsigned int inbound_do_qdio_cnt;
unsigned int inbound_do_qdio_time;
/* number of calls to and time spent in do_QDIO for outbound queues */
__u64 outbound_do_qdio_start_time;
unsigned int outbound_do_qdio_cnt;
unsigned int outbound_do_qdio_time;
unsigned int large_send_bytes;
unsigned int large_send_cnt;
unsigned int sg_skbs_sent;
/* initial values when measuring starts */
unsigned long initial_rx_packets;
unsigned long initial_tx_packets;
/* inbound scatter gather data */
unsigned int sg_skbs_rx;
unsigned int sg_frags_rx;
unsigned int sg_alloc_page_rx;
unsigned int tx_csum;
unsigned int tx_lin;
unsigned int tx_linfail;
unsigned int rx_csum;
};
/* Routing stuff */
struct qeth_routing_info {
enum qeth_routing_types type;
};
/* IPA stuff */
struct qeth_ipa_info {
__u32 supported_funcs;
__u32 enabled_funcs;
};
/* SETBRIDGEPORT stuff */
enum qeth_sbp_roles {
QETH_SBP_ROLE_NONE = 0,
QETH_SBP_ROLE_PRIMARY = 1,
QETH_SBP_ROLE_SECONDARY = 2,
};
enum qeth_sbp_states {
QETH_SBP_STATE_INACTIVE = 0,
QETH_SBP_STATE_STANDBY = 1,
QETH_SBP_STATE_ACTIVE = 2,
};
#define QETH_SBP_HOST_NOTIFICATION 1
struct qeth_sbp_info {
__u32 supported_funcs;
enum qeth_sbp_roles role;
__u32 hostnotification:1;
__u32 reflect_promisc:1;
__u32 reflect_promisc_primary:1;
};
struct qeth_vnicc_info {
/* supported/currently configured VNICCs; updated in IPA exchanges */
u32 sup_chars;
u32 cur_chars;
s390/qeth: add VNICC enable/disable support HiperSocket devices allow enabling and disabling so called VNIC Characteristics (VNICC) that influence how the underlying hardware handles packets. These VNICCs are: * Flooding VNICC: Flooding allows specifying if packets to unknown destination MAC addresses are received by the qeth device. * Multicast flooding VNICC: Multicast flooding allows specifying if packets to multicast MAC addresses are received by the qeth device. * Learning VNICC: If learning is enabled on a qeth device, the device learns the source MAC addresses of outgoing packets and incoming packets to those learned MAC addresses are received. * Takeover setvmac VNICC: If takeover setvmac is configured on a qeth device, the MAC address of this device can be configured on a different qeth device with the setvmac IPA command. * Takeover by learning VNICC: If takeover learning is enabled on a qeth device, the MAC address of this device can be learned (learning VNICC) on a different qeth device. * BridgePort invisible VNICC: If BridgePort invisible is enabled on a qeth device, (1) packets from this device are not sent to a BridgePort enabled qeth device and (2) packets coming from a BridgePort enabled qeth device are not received by this device. * Receive broadcast VNICC: Receive broadcast allows configuring if a qeth device receives packets with the broadcast destination MAC address. This patch adds support for the IPA commands that are required to enable and disable these VNIC characteristics on qeth devices. As a prerequisite, it also adds the query commands IPA command. The query commands IPA command allows requesting the supported commands for each characteristic from the underlying hardware. Additionally, this patch provides users with a sysfs user interface to enable/disable the VNICCs mentioned above. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18 19:18:15 +00:00
/* supported commands: bitmasks which VNICCs support respective cmd */
u32 set_char_sup;
u32 getset_timeout_sup;
/* timeout value for the learning characteristic */
u32 learning_timeout;
s390/qeth: add VNICC enable/disable support HiperSocket devices allow enabling and disabling so called VNIC Characteristics (VNICC) that influence how the underlying hardware handles packets. These VNICCs are: * Flooding VNICC: Flooding allows specifying if packets to unknown destination MAC addresses are received by the qeth device. * Multicast flooding VNICC: Multicast flooding allows specifying if packets to multicast MAC addresses are received by the qeth device. * Learning VNICC: If learning is enabled on a qeth device, the device learns the source MAC addresses of outgoing packets and incoming packets to those learned MAC addresses are received. * Takeover setvmac VNICC: If takeover setvmac is configured on a qeth device, the MAC address of this device can be configured on a different qeth device with the setvmac IPA command. * Takeover by learning VNICC: If takeover learning is enabled on a qeth device, the MAC address of this device can be learned (learning VNICC) on a different qeth device. * BridgePort invisible VNICC: If BridgePort invisible is enabled on a qeth device, (1) packets from this device are not sent to a BridgePort enabled qeth device and (2) packets coming from a BridgePort enabled qeth device are not received by this device. * Receive broadcast VNICC: Receive broadcast allows configuring if a qeth device receives packets with the broadcast destination MAC address. This patch adds support for the IPA commands that are required to enable and disable these VNIC characteristics on qeth devices. As a prerequisite, it also adds the query commands IPA command. The query commands IPA command allows requesting the supported commands for each characteristic from the underlying hardware. Additionally, this patch provides users with a sysfs user interface to enable/disable the VNICCs mentioned above. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18 19:18:15 +00:00
/* characteristics wanted/configured by user */
u32 wanted_chars;
/* has user explicitly enabled rx_bcast while online? */
bool rx_bcast_enabled;
};
static inline int qeth_is_ipa_supported(struct qeth_ipa_info *ipa,
enum qeth_ipa_funcs func)
{
return (ipa->supported_funcs & func);
}
static inline int qeth_is_ipa_enabled(struct qeth_ipa_info *ipa,
enum qeth_ipa_funcs func)
{
return (ipa->supported_funcs & ipa->enabled_funcs & func);
}
#define qeth_adp_supported(c, f) \
qeth_is_ipa_supported(&c->options.adp, f)
#define qeth_adp_enabled(c, f) \
qeth_is_ipa_enabled(&c->options.adp, f)
#define qeth_is_supported(c, f) \
qeth_is_ipa_supported(&c->options.ipa4, f)
#define qeth_is_enabled(c, f) \
qeth_is_ipa_enabled(&c->options.ipa4, f)
#define qeth_is_supported6(c, f) \
qeth_is_ipa_supported(&c->options.ipa6, f)
#define qeth_is_enabled6(c, f) \
qeth_is_ipa_enabled(&c->options.ipa6, f)
#define qeth_is_ipafunc_supported(c, prot, f) \
((prot == QETH_PROT_IPV6) ? \
qeth_is_supported6(c, f) : qeth_is_supported(c, f))
#define qeth_is_ipafunc_enabled(c, prot, f) \
((prot == QETH_PROT_IPV6) ? \
qeth_is_enabled6(c, f) : qeth_is_enabled(c, f))
#define QETH_IDX_FUNC_LEVEL_OSD 0x0101
#define QETH_IDX_FUNC_LEVEL_IQD 0x4108
#define QETH_BUFSIZE 4096
#define CCW_CMD_WRITE 0x01
#define CCW_CMD_READ 0x02
/**
* some more defs
*/
#define QETH_TX_TIMEOUT 100 * HZ
#define QETH_RCD_TIMEOUT 60 * HZ
#define QETH_RECLAIM_WORK_TIME HZ
#define QETH_MAX_PORTNO 15
/*IPv6 address autoconfiguration stuff*/
#define UNIQUE_ID_IF_CREATE_ADDR_FAILED 0xfffe
#define UNIQUE_ID_NOT_BY_CARD 0x10000
/*****************************************************************************/
/* QDIO queue and buffer handling */
/*****************************************************************************/
#define QETH_MAX_QUEUES 4
#define QETH_IN_BUF_SIZE_DEFAULT 65536
#define QETH_IN_BUF_COUNT_DEFAULT 64
#define QETH_IN_BUF_COUNT_HSDEFAULT 128
#define QETH_IN_BUF_COUNT_MIN 8
#define QETH_IN_BUF_COUNT_MAX 128
#define QETH_MAX_BUFFER_ELEMENTS(card) ((card)->qdio.in_buf_size >> 12)
#define QETH_IN_BUF_REQUEUE_THRESHOLD(card) \
((card)->qdio.in_buf_pool.buf_count / 2)
/* buffers we have to be behind before we get a PCI */
#define QETH_PCI_THRESHOLD_A(card) ((card)->qdio.in_buf_pool.buf_count+1)
/*enqueued free buffers left before we get a PCI*/
#define QETH_PCI_THRESHOLD_B(card) 0
/*not used unless the microcode gets patched*/
#define QETH_PCI_TIMER_VALUE(card) 3
/* priority queing */
#define QETH_PRIOQ_DEFAULT QETH_NO_PRIO_QUEUEING
#define QETH_DEFAULT_QUEUE 2
#define QETH_NO_PRIO_QUEUEING 0
#define QETH_PRIO_Q_ING_PREC 1
#define QETH_PRIO_Q_ING_TOS 2
#define QETH_PRIO_Q_ING_SKB 3
#define QETH_PRIO_Q_ING_VLAN 4
/* Packing */
#define QETH_LOW_WATERMARK_PACK 2
#define QETH_HIGH_WATERMARK_PACK 5
#define QETH_WATERMARK_PACK_FUZZ 1
/* large receive scatter gather copy break */
#define QETH_RX_SG_CB (PAGE_SIZE >> 1)
#define QETH_RX_PULL_LEN 256
struct qeth_hdr_layer3 {
__u8 id;
__u8 flags;
__u16 inbound_checksum; /*TSO:__u16 seqno */
__u32 token; /*TSO: __u32 reserved */
__u16 length;
__u8 vlan_prio;
__u8 ext_flags;
__u16 vlan_id;
__u16 frame_offset;
union {
/* TX: */
u8 ipv6_addr[16];
struct ipv4 {
u8 res[12];
u32 addr;
} ipv4;
/* RX: */
struct rx {
u8 res1[2];
u8 src_mac[6];
u8 res2[4];
u16 vlan_id;
u8 res3[2];
} rx;
} next_hop;
};
struct qeth_hdr_layer2 {
__u8 id;
__u8 flags[3];
__u8 port_no;
__u8 hdr_length;
__u16 pkt_length;
__u16 seq_no;
__u16 vlan_id;
__u32 reserved;
__u8 reserved2[16];
} __attribute__ ((packed));
struct qeth_hdr_osn {
__u8 id;
__u8 reserved;
__u16 seq_no;
__u16 reserved2;
__u16 control_flags;
__u16 pdu_length;
__u8 reserved3[18];
__u32 ccid;
} __attribute__ ((packed));
struct qeth_hdr {
union {
struct qeth_hdr_layer2 l2;
struct qeth_hdr_layer3 l3;
struct qeth_hdr_osn osn;
} hdr;
} __attribute__ ((packed));
/*TCP Segmentation Offload header*/
struct qeth_hdr_ext_tso {
__u16 hdr_tot_len;
__u8 imb_hdr_no;
__u8 reserved;
__u8 hdr_type;
__u8 hdr_version;
__u16 hdr_len;
__u32 payload_len;
__u16 mss;
__u16 dg_hdr_len;
__u8 padding[16];
} __attribute__ ((packed));
struct qeth_hdr_tso {
struct qeth_hdr hdr; /*hdr->hdr.l3.xxx*/
struct qeth_hdr_ext_tso ext;
} __attribute__ ((packed));
/* flags for qeth_hdr.flags */
#define QETH_HDR_PASSTHRU 0x10
#define QETH_HDR_IPV6 0x80
#define QETH_HDR_CAST_MASK 0x07
enum qeth_cast_flags {
QETH_CAST_UNICAST = 0x06,
QETH_CAST_MULTICAST = 0x04,
QETH_CAST_BROADCAST = 0x05,
QETH_CAST_ANYCAST = 0x07,
QETH_CAST_NOCAST = 0x00,
};
enum qeth_layer2_frame_flags {
QETH_LAYER2_FLAG_MULTICAST = 0x01,
QETH_LAYER2_FLAG_BROADCAST = 0x02,
QETH_LAYER2_FLAG_UNICAST = 0x04,
QETH_LAYER2_FLAG_VLAN = 0x10,
};
enum qeth_header_ids {
QETH_HEADER_TYPE_LAYER3 = 0x01,
QETH_HEADER_TYPE_LAYER2 = 0x02,
QETH_HEADER_TYPE_TSO = 0x03,
QETH_HEADER_TYPE_OSN = 0x04,
};
/* flags for qeth_hdr.ext_flags */
#define QETH_HDR_EXT_VLAN_FRAME 0x01
#define QETH_HDR_EXT_TOKEN_ID 0x02
#define QETH_HDR_EXT_INCLUDE_VLAN_TAG 0x04
#define QETH_HDR_EXT_SRC_MAC_ADDR 0x08
#define QETH_HDR_EXT_CSUM_HDR_REQ 0x10
#define QETH_HDR_EXT_CSUM_TRANSP_REQ 0x20
#define QETH_HDR_EXT_UDP 0x40 /*bit off for TCP*/
enum qeth_qdio_buffer_states {
/*
* inbound: read out by driver; owned by hardware in order to be filled
* outbound: owned by driver in order to be filled
*/
QETH_QDIO_BUF_EMPTY,
/*
* inbound: filled by hardware; owned by driver in order to be read out
* outbound: filled by driver; owned by hardware in order to be sent
*/
QETH_QDIO_BUF_PRIMED,
/*
* inbound: not applicable
* outbound: identified to be pending in TPQ
*/
QETH_QDIO_BUF_PENDING,
/*
* inbound: not applicable
* outbound: found in completion queue
*/
QETH_QDIO_BUF_IN_CQ,
/*
* inbound: not applicable
* outbound: handled via transfer pending / completion queue
*/
QETH_QDIO_BUF_HANDLED_DELAYED,
};
enum qeth_qdio_info_states {
QETH_QDIO_UNINITIALIZED,
QETH_QDIO_ALLOCATED,
QETH_QDIO_ESTABLISHED,
QETH_QDIO_CLEANING
};
struct qeth_buffer_pool_entry {
struct list_head list;
struct list_head init_list;
void *elements[QDIO_MAX_ELEMENTS_PER_BUFFER];
};
struct qeth_qdio_buffer_pool {
struct list_head entry_list;
int buf_count;
};
struct qeth_qdio_buffer {
struct qdio_buffer *buffer;
/* the buffer pool entry currently associated to this buffer */
struct qeth_buffer_pool_entry *pool_entry;
struct sk_buff *rx_skb;
};
struct qeth_qdio_q {
struct qdio_buffer *qdio_bufs[QDIO_MAX_BUFFERS_PER_Q];
struct qeth_qdio_buffer bufs[QDIO_MAX_BUFFERS_PER_Q];
int next_buf_to_init;
};
struct qeth_qdio_out_buffer {
struct qdio_buffer *buffer;
atomic_t state;
int next_element_to_fill;
struct sk_buff_head skb_list;
int is_header[QDIO_MAX_ELEMENTS_PER_BUFFER];
struct qeth_qdio_out_q *q;
struct qeth_qdio_out_buffer *next_pending;
};
struct qeth_card;
enum qeth_out_q_states {
QETH_OUT_Q_UNLOCKED,
QETH_OUT_Q_LOCKED,
QETH_OUT_Q_LOCKED_FLUSH,
};
struct qeth_qdio_out_q {
struct qdio_buffer *qdio_bufs[QDIO_MAX_BUFFERS_PER_Q];
struct qeth_qdio_out_buffer *bufs[QDIO_MAX_BUFFERS_PER_Q];
struct qdio_outbuf_state *bufstates; /* convenience pointer */
int queue_no;
struct qeth_card *card;
atomic_t state;
int do_pack;
/*
* index of buffer to be filled by driver; state EMPTY or PACKING
*/
int next_buf_to_fill;
/*
* number of buffers that are currently filled (PRIMED)
* -> these buffers are hardware-owned
*/
atomic_t used_buffers;
/* indicates whether PCI flag must be set (or if one is outstanding) */
atomic_t set_pci_flags_count;
};
struct qeth_qdio_info {
atomic_t state;
/* input */
int no_in_queues;
struct qeth_qdio_q *in_q;
struct qeth_qdio_q *c_q;
struct qeth_qdio_buffer_pool in_buf_pool;
struct qeth_qdio_buffer_pool init_pool;
int in_buf_size;
/* output */
int no_out_queues;
struct qeth_qdio_out_q **out_qs;
struct qdio_outbuf_state *out_bufstates;
/* priority queueing */
int do_prio_queueing;
int default_out_queue;
};
/**
* buffer stuff for read channel
*/
#define QETH_CMD_BUFFER_NO 8
/**
* channel state machine
*/
enum qeth_channel_states {
CH_STATE_UP,
CH_STATE_DOWN,
CH_STATE_ACTIVATING,
CH_STATE_HALTED,
CH_STATE_STOPPED,
CH_STATE_RCD,
CH_STATE_RCD_DONE,
};
/**
* card state machine
*/
enum qeth_card_states {
CARD_STATE_DOWN,
CARD_STATE_HARDSETUP,
CARD_STATE_SOFTSETUP,
CARD_STATE_UP,
CARD_STATE_RECOVER,
};
/**
* Protocol versions
*/
enum qeth_prot_versions {
QETH_PROT_IPV4 = 0x0004,
QETH_PROT_IPV6 = 0x0006,
};
enum qeth_cmd_buffer_state {
BUF_STATE_FREE,
BUF_STATE_LOCKED,
};
enum qeth_cq {
QETH_CQ_DISABLED = 0,
QETH_CQ_ENABLED = 1,
QETH_CQ_NOTAVAILABLE = 2,
};
struct qeth_ipato {
bool enabled;
bool invert4;
bool invert6;
struct list_head entries;
};
struct qeth_channel;
struct qeth_cmd_buffer {
enum qeth_cmd_buffer_state state;
struct qeth_channel *channel;
unsigned char *data;
int rc;
void (*callback) (struct qeth_channel *, struct qeth_cmd_buffer *);
};
static inline struct qeth_ipa_cmd *__ipa_cmd(struct qeth_cmd_buffer *iob)
{
return (struct qeth_ipa_cmd *)(iob->data + IPA_PDU_HEADER_SIZE);
}
/**
* definition of a qeth channel, used for read and write
*/
struct qeth_channel {
enum qeth_channel_states state;
struct ccw1 *ccw;
spinlock_t iob_lock;
wait_queue_head_t wait_q;
struct ccw_device *ccwdev;
/*command buffer for control data*/
struct qeth_cmd_buffer iob[QETH_CMD_BUFFER_NO];
atomic_t irq_pending;
int io_buf_no;
};
/**
* OSA card related definitions
*/
struct qeth_token {
__u32 issuer_rm_w;
__u32 issuer_rm_r;
__u32 cm_filter_w;
__u32 cm_filter_r;
__u32 cm_connection_w;
__u32 cm_connection_r;
__u32 ulp_filter_w;
__u32 ulp_filter_r;
__u32 ulp_connection_w;
__u32 ulp_connection_r;
};
struct qeth_seqno {
__u32 trans_hdr;
__u32 pdu_hdr;
__u32 pdu_hdr_ack;
__u16 ipa;
__u32 pkt_seqno;
};
struct qeth_reply {
struct list_head list;
wait_queue_head_t wait_q;
int (*callback)(struct qeth_card *, struct qeth_reply *,
unsigned long);
u32 seqno;
unsigned long offset;
atomic_t received;
int rc;
void *param;
struct qeth_card *card;
refcount_t refcnt;
};
struct qeth_card_blkt {
int time_total;
int inter_packet;
int inter_packet_jumbo;
};
#define QETH_BROADCAST_WITH_ECHO 0x01
#define QETH_BROADCAST_WITHOUT_ECHO 0x02
#define QETH_LAYER2_MAC_READ 0x01
#define QETH_LAYER2_MAC_REGISTERED 0x02
struct qeth_card_info {
unsigned short unit_addr2;
unsigned short cula;
unsigned short chpid;
__u16 func_level;
char mcl_level[QETH_MCL_LENGTH + 1];
int guestlan;
int mac_bits;
enum qeth_card_types type;
enum qeth_link_types link_type;
int broadcast_capable;
int unique_id;
bool layer_enforced;
struct qeth_card_blkt blkt;
enum qeth_ipa_promisc_modes promisc_mode;
__u32 diagass_support;
__u32 hwtrap;
};
struct qeth_card_options {
struct qeth_routing_info route4;
struct qeth_ipa_info ipa4;
struct qeth_ipa_info adp; /*Adapter parameters*/
struct qeth_routing_info route6;
struct qeth_ipa_info ipa6;
struct qeth_sbp_info sbp; /* SETBRIDGEPORT options */
struct qeth_vnicc_info vnicc; /* VNICC options */
int fake_broadcast;
int layer2;
int performance_stats;
int rx_sg_cb;
enum qeth_ipa_isolation_modes isolation;
enum qeth_ipa_isolation_modes prev_isolation;
int sniffer;
enum qeth_cq cq;
char hsuid[9];
};
/*
* thread bits for qeth_card thread masks
*/
enum qeth_threads {
QETH_RECOVER_THREAD = 1,
};
struct qeth_osn_info {
int (*assist_cb)(struct net_device *dev, void *data);
int (*data_cb)(struct sk_buff *skb);
};
enum qeth_discipline_id {
QETH_DISCIPLINE_UNDETERMINED = -1,
QETH_DISCIPLINE_LAYER3 = 0,
QETH_DISCIPLINE_LAYER2 = 1,
};
struct qeth_discipline {
s390/qeth: unbreak OSM and OSN support commit b4d72c08b358 ("qeth: bridgeport support - basic control") broke the support for OSM and OSN devices as follows: As OSM and OSN are L2 only, qeth_core_probe_device() does an early setup by loading the l2 discipline and calling qeth_l2_probe_device(). In this context, adding the l2-specific bridgeport sysfs attributes via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c, since the basic sysfs infrastructure for the device hasn't been established yet. Note that OSN actually has its own unique sysfs attributes (qeth_osn_devtype), so the additional attributes shouldn't be created at all. For OSM, add a new qeth_l2_devtype that contains all the common and l2-specific sysfs attributes. When qeth_core_probe_device() does early setup for OSM or OSN, assign the corresponding devtype so that the ccwgroup probe code creates the full set of sysfs attributes. This allows us to skip qeth_l2_create_device_attributes() in case of an early setup. Any device that can't do early setup will initially have only the generic sysfs attributes, and when it's probed later qeth_l2_probe_device() adds the l2-specific attributes. If an early-setup device is removed (by calling ccwgroup_ungroup()), device_unregister() will - using the devtype - delete the l2-specific attributes before qeth_l2_remove_device() is called. So make sure to not remove them twice. What complicates the issue is that qeth_l2_probe_device() and qeth_l2_remove_device() is also called on a device when its layer2 attribute changes (ie. its layer mode is switched). For early-setup devices this wouldn't work properly - we wouldn't remove the l2-specific attributes when switching to L3. But switching the layer mode doesn't actually make any sense; we already decided that the device can only operate in L2! So just refuse to switch the layer mode on such devices. Note that OSN doesn't have a layer2 attribute, so we only need to special-case OSM. Based on an initial patch by Ursula Braun. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-10 17:07:52 +00:00
const struct device_type *devtype;
int (*process_rx_buffer)(struct qeth_card *card, int budget, int *done);
int (*recover)(void *ptr);
int (*setup) (struct ccwgroup_device *);
void (*remove) (struct ccwgroup_device *);
int (*set_online) (struct ccwgroup_device *);
int (*set_offline) (struct ccwgroup_device *);
int (*freeze)(struct ccwgroup_device *);
int (*thaw) (struct ccwgroup_device *);
int (*restore)(struct ccwgroup_device *);
int (*do_ioctl)(struct net_device *dev, struct ifreq *rq, int cmd);
int (*control_event_handler)(struct qeth_card *card,
struct qeth_ipa_cmd *cmd);
};
struct qeth_vlan_vid {
struct list_head list;
unsigned short vid;
};
enum qeth_addr_disposition {
QETH_DISP_ADDR_DELETE = 0,
QETH_DISP_ADDR_DO_NOTHING = 1,
QETH_DISP_ADDR_ADD = 2,
};
struct qeth_rx {
int b_count;
int b_index;
struct qdio_buffer_element *b_element;
int e_offset;
int qdio_err;
};
struct carrier_info {
__u8 card_type;
__u16 port_mode;
__u32 port_speed;
};
struct qeth_switch_info {
__u32 capabilities;
__u32 settings;
};
#define QETH_NAPI_WEIGHT NAPI_POLL_WEIGHT
struct qeth_card {
struct list_head list;
enum qeth_card_states state;
int lan_online;
spinlock_t lock;
struct ccwgroup_device *gdev;
struct qeth_channel read;
struct qeth_channel write;
struct qeth_channel data;
struct net_device *dev;
struct net_device_stats stats;
struct qeth_card_info info;
struct qeth_token token;
struct qeth_seqno seqno;
struct qeth_card_options options;
wait_queue_head_t wait_q;
spinlock_t mclock;
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
struct mutex vid_list_mutex; /* vid_list */
struct list_head vid_list;
DECLARE_HASHTABLE(mac_htable, 4);
DECLARE_HASHTABLE(ip_htable, 4);
DECLARE_HASHTABLE(ip_mc_htable, 4);
struct work_struct kernel_thread_starter;
spinlock_t thread_mask_lock;
unsigned long thread_start_mask;
unsigned long thread_allowed_mask;
unsigned long thread_running_mask;
struct task_struct *recovery_task;
spinlock_t ip_lock;
struct qeth_ipato ipato;
struct list_head cmd_waiter_list;
/* QDIO buffer handling */
struct qeth_qdio_info qdio;
struct qeth_perf_stats perf_stats;
int read_or_write_problem;
struct qeth_osn_info osn_info;
struct qeth_discipline *discipline;
atomic_t force_alloc_skb;
struct service_level qeth_service_level;
struct qdio_ssqd_desc ssqd;
debug_info_t *debug;
struct mutex conf_mutex;
struct mutex discipline_mutex;
struct napi_struct napi;
struct qeth_rx rx;
struct delayed_work buffer_reclaim_work;
int reclaim_index;
struct work_struct close_dev_work;
};
struct qeth_card_list_struct {
struct list_head list;
rwlock_t rwlock;
};
struct qeth_trap_id {
__u16 lparnr;
char vmname[8];
__u8 chpid;
__u8 ssid;
__u16 devno;
} __packed;
/*some helper functions*/
#define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "")
static inline void qeth_scrub_qdio_buffer(struct qdio_buffer *buf,
unsigned int elements)
{
unsigned int i;
for (i = 0; i < elements; i++)
memset(&buf->element[i], 0, sizeof(struct qdio_buffer_element));
buf->element[14].sflags = 0;
buf->element[15].sflags = 0;
}
/**
* qeth_get_elements_for_range() - find number of SBALEs to cover range.
* @start: Start of the address range.
* @end: Address after the end of the range.
*
* Returns the number of pages, and thus QDIO buffer elements, needed to cover
* the specified address range.
*/
static inline int qeth_get_elements_for_range(addr_t start, addr_t end)
{
return PFN_UP(end) - PFN_DOWN(start);
}
static inline int qeth_get_micros(void)
{
return (int) (get_tod_clock() >> 12);
}
static inline int qeth_get_ip_version(struct sk_buff *skb)
{
struct vlan_ethhdr *veth = vlan_eth_hdr(skb);
__be16 prot = veth->h_vlan_proto;
if (prot == htons(ETH_P_8021Q))
prot = veth->h_vlan_encapsulated_proto;
switch (prot) {
case htons(ETH_P_IPV6):
return 6;
case htons(ETH_P_IP):
return 4;
default:
return 0;
}
}
static inline void qeth_rx_csum(struct qeth_card *card, struct sk_buff *skb,
u8 flags)
{
if ((card->dev->features & NETIF_F_RXCSUM) &&
(flags & QETH_HDR_EXT_CSUM_TRANSP_REQ)) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
if (card->options.performance_stats)
card->perf_stats.rx_csum++;
} else {
skb->ip_summed = CHECKSUM_NONE;
}
}
static inline void qeth_tx_csum(struct sk_buff *skb, u8 *flags, int ipv)
{
*flags |= QETH_HDR_EXT_CSUM_TRANSP_REQ;
if ((ipv == 4 && ip_hdr(skb)->protocol == IPPROTO_UDP) ||
(ipv == 6 && ipv6_hdr(skb)->nexthdr == IPPROTO_UDP))
*flags |= QETH_HDR_EXT_UDP;
if (ipv == 4) {
/* some HW requires combined L3+L4 csum offload: */
*flags |= QETH_HDR_EXT_CSUM_HDR_REQ;
ip_hdr(skb)->check = 0;
}
}
static inline void qeth_put_buffer_pool_entry(struct qeth_card *card,
struct qeth_buffer_pool_entry *entry)
{
list_add_tail(&entry->list, &card->qdio.in_buf_pool.entry_list);
}
static inline int qeth_is_diagass_supported(struct qeth_card *card,
enum qeth_diags_cmds cmd)
{
return card->info.diagass_support & (__u32)cmd;
}
int qeth_send_simple_setassparms_prot(struct qeth_card *card,
enum qeth_ipa_funcs ipa_func,
u16 cmd_code, long data,
enum qeth_prot_versions prot);
/* IPv4 variant */
static inline int qeth_send_simple_setassparms(struct qeth_card *card,
enum qeth_ipa_funcs ipa_func,
u16 cmd_code, long data)
{
return qeth_send_simple_setassparms_prot(card, ipa_func, cmd_code,
data, QETH_PROT_IPV4);
}
static inline int qeth_send_simple_setassparms_v6(struct qeth_card *card,
enum qeth_ipa_funcs ipa_func,
u16 cmd_code, long data)
{
return qeth_send_simple_setassparms_prot(card, ipa_func, cmd_code,
data, QETH_PROT_IPV6);
}
int qeth_get_priority_queue(struct qeth_card *card, struct sk_buff *skb,
int ipv);
static inline struct qeth_qdio_out_q *qeth_get_tx_queue(struct qeth_card *card,
struct sk_buff *skb,
int ipv, int cast_type)
{
if (IS_IQD(card) && cast_type != RTN_UNICAST)
return card->qdio.out_qs[card->qdio.no_out_queues - 1];
if (!card->qdio.do_prio_queueing)
return card->qdio.out_qs[card->qdio.default_out_queue];
return card->qdio.out_qs[qeth_get_priority_queue(card, skb, ipv)];
}
extern struct qeth_discipline qeth_l2_discipline;
extern struct qeth_discipline qeth_l3_discipline;
extern const struct attribute_group *qeth_generic_attr_groups[];
extern const struct attribute_group *qeth_osn_attr_groups[];
s390/qeth: unbreak OSM and OSN support commit b4d72c08b358 ("qeth: bridgeport support - basic control") broke the support for OSM and OSN devices as follows: As OSM and OSN are L2 only, qeth_core_probe_device() does an early setup by loading the l2 discipline and calling qeth_l2_probe_device(). In this context, adding the l2-specific bridgeport sysfs attributes via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c, since the basic sysfs infrastructure for the device hasn't been established yet. Note that OSN actually has its own unique sysfs attributes (qeth_osn_devtype), so the additional attributes shouldn't be created at all. For OSM, add a new qeth_l2_devtype that contains all the common and l2-specific sysfs attributes. When qeth_core_probe_device() does early setup for OSM or OSN, assign the corresponding devtype so that the ccwgroup probe code creates the full set of sysfs attributes. This allows us to skip qeth_l2_create_device_attributes() in case of an early setup. Any device that can't do early setup will initially have only the generic sysfs attributes, and when it's probed later qeth_l2_probe_device() adds the l2-specific attributes. If an early-setup device is removed (by calling ccwgroup_ungroup()), device_unregister() will - using the devtype - delete the l2-specific attributes before qeth_l2_remove_device() is called. So make sure to not remove them twice. What complicates the issue is that qeth_l2_probe_device() and qeth_l2_remove_device() is also called on a device when its layer2 attribute changes (ie. its layer mode is switched). For early-setup devices this wouldn't work properly - we wouldn't remove the l2-specific attributes when switching to L3. But switching the layer mode doesn't actually make any sense; we already decided that the device can only operate in L2! So just refuse to switch the layer mode on such devices. Note that OSN doesn't have a layer2 attribute, so we only need to special-case OSM. Based on an initial patch by Ursula Braun. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-10 17:07:52 +00:00
extern const struct attribute_group qeth_device_attr_group;
extern const struct attribute_group qeth_device_blkt_group;
extern const struct device_type qeth_generic_devtype;
extern struct workqueue_struct *qeth_wq;
int qeth_card_hw_is_reachable(struct qeth_card *);
const char *qeth_get_cardname_short(struct qeth_card *);
int qeth_realloc_buffer_pool(struct qeth_card *, int);
int qeth_core_load_discipline(struct qeth_card *, enum qeth_discipline_id);
void qeth_core_free_discipline(struct qeth_card *);
/* exports for qeth discipline device drivers */
extern struct qeth_card_list_struct qeth_core_card_list;
extern struct kmem_cache *qeth_core_header_cache;
extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS];
struct net_device *qeth_clone_netdev(struct net_device *orig);
void qeth_set_recovery_task(struct qeth_card *);
void qeth_clear_recovery_task(struct qeth_card *);
void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int);
int qeth_threads_running(struct qeth_card *, unsigned long);
int qeth_wait_for_threads(struct qeth_card *, unsigned long);
int qeth_do_run_thread(struct qeth_card *, unsigned long);
void qeth_clear_thread_start_bit(struct qeth_card *, unsigned long);
void qeth_clear_thread_running_bit(struct qeth_card *, unsigned long);
int qeth_core_hardsetup_card(struct qeth_card *);
void qeth_print_status_message(struct qeth_card *);
int qeth_init_qdio_queues(struct qeth_card *);
int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *,
int (*reply_cb)
(struct qeth_card *, struct qeth_reply *, unsigned long),
void *);
struct qeth_cmd_buffer *qeth_get_ipacmd_buffer(struct qeth_card *,
enum qeth_ipa_cmds, enum qeth_prot_versions);
struct sk_buff *qeth_core_get_next_skb(struct qeth_card *,
struct qeth_qdio_buffer *, struct qdio_buffer_element **, int *,
struct qeth_hdr **);
void qeth_schedule_recovery(struct qeth_card *);
int qeth_poll(struct napi_struct *napi, int budget);
void qeth_clear_ipacmd_list(struct qeth_card *);
int qeth_qdio_clear_card(struct qeth_card *, int);
void qeth_clear_working_pool_list(struct qeth_card *);
void qeth_clear_cmd_buffers(struct qeth_channel *);
void qeth_clear_qdio_buffers(struct qeth_card *);
void qeth_setadp_promisc_mode(struct qeth_card *);
struct net_device_stats *qeth_get_stats(struct net_device *);
int qeth_setadpparms_change_macaddr(struct qeth_card *);
void qeth_tx_timeout(struct net_device *);
void qeth_prepare_control_data(struct qeth_card *, int,
struct qeth_cmd_buffer *);
void qeth_release_buffer(struct qeth_channel *, struct qeth_cmd_buffer *);
void qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob);
struct qeth_cmd_buffer *qeth_wait_for_buffer(struct qeth_channel *);
int qeth_query_switch_attributes(struct qeth_card *card,
struct qeth_switch_info *sw_info);
int qeth_send_control_data(struct qeth_card *, int, struct qeth_cmd_buffer *,
int (*reply_cb)(struct qeth_card *, struct qeth_reply*, unsigned long),
void *reply_param);
int qeth_get_elements_no(struct qeth_card *card, struct sk_buff *skb,
int extra_elems, int data_offset);
int qeth_get_elements_for_frags(struct sk_buff *);
int qeth_do_send_packet_fast(struct qeth_qdio_out_q *queue, struct sk_buff *skb,
struct qeth_hdr *hdr, unsigned int offset,
unsigned int hd_len);
int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue,
struct sk_buff *skb, struct qeth_hdr *hdr,
unsigned int offset, unsigned int hd_len,
int elements_needed);
int qeth_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
int qeth_core_get_sset_count(struct net_device *, int);
void qeth_core_get_ethtool_stats(struct net_device *,
struct ethtool_stats *, u64 *);
void qeth_core_get_strings(struct net_device *, u32, u8 *);
void qeth_core_get_drvinfo(struct net_device *, struct ethtool_drvinfo *);
void qeth_dbf_longtext(debug_info_t *id, int level, char *text, ...);
int qeth_core_ethtool_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *cmd);
int qeth_set_access_ctrl_online(struct qeth_card *card, int fallback);
int qeth_hdr_chk_and_bounce(struct sk_buff *, struct qeth_hdr **, int);
int qeth_configure_cq(struct qeth_card *, enum qeth_cq);
int qeth_hw_trap(struct qeth_card *, enum qeth_diags_trap_action);
void qeth_trace_features(struct qeth_card *);
void qeth_close_dev(struct qeth_card *);
int qeth_send_setassparms(struct qeth_card *, struct qeth_cmd_buffer *, __u16,
long,
int (*reply_cb)(struct qeth_card *,
struct qeth_reply *, unsigned long),
void *);
int qeth_setassparms_cb(struct qeth_card *, struct qeth_reply *, unsigned long);
struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *,
enum qeth_ipa_funcs,
__u16, __u16,
enum qeth_prot_versions);
int qeth_set_features(struct net_device *, netdev_features_t);
void qeth_enable_hw_features(struct net_device *dev);
netdev_features_t qeth_fix_features(struct net_device *, netdev_features_t);
netdev_features_t qeth_features_check(struct sk_buff *skb,
struct net_device *dev,
netdev_features_t features);
int qeth_vm_request_mac(struct qeth_card *card);
int qeth_add_hw_header(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr **hdr, unsigned int hdr_len,
unsigned int proto_len, unsigned int *elements);
/* exports for OSN */
int qeth_osn_assist(struct net_device *, void *, int);
int qeth_osn_register(unsigned char *read_dev_no, struct net_device **,
int (*assist_cb)(struct net_device *, void *),
int (*data_cb)(struct sk_buff *));
void qeth_osn_deregister(struct net_device *);
#endif /* __QETH_CORE_H__ */