linux/tools/perf/perf.c

538 lines
12 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* perf.c
*
* Performance analysis utility.
*
* This is the main hub from which the sub-commands (perf stat,
* perf top, perf record, perf report, etc.) are started.
*/
#include "builtin.h"
#include "util/env.h"
#include <subcmd/exec-cmd.h>
#include "util/config.h"
#include <subcmd/run-command.h>
#include "util/parse-events.h"
#include <subcmd/parse-options.h>
perf tools: Enable passing bpf object file to --event By introducing new rules in tools/perf/util/parse-events.[ly], this patch enables 'perf record --event bpf_file.o' to select events by an eBPF object file. It calls parse_events_load_bpf() to load that file, which uses bpf__prepare_load() and finally calls bpf_object__open() for the object files. After applying this patch, commands like: # perf record --event foo.o sleep become possible. However, at this point it is unable to link any useful things onto the evsel list because the creating of probe points and BPF program attaching have not been implemented. Before real events are possible to be extracted, to avoid perf report error because of empty evsel list, this patch link a dummy evsel. The dummy event related code will be removed when probing and extracting code is ready. Commiter notes: Using it: $ ls -la foo.o ls: cannot access foo.o: No such file or directory $ perf record --event foo.o sleep libbpf: failed to open foo.o: No such file or directory event syntax error: 'foo.o' \___ BPF object file 'foo.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/build/perf/perf.o /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped $ perf record --event /tmp/build/perf/perf.o sleep libbpf: /tmp/build/perf/perf.o is not an eBPF object file event syntax error: '/tmp/build/perf/perf.o' \___ BPF object file '/tmp/build/perf/perf.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/foo.o /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped $ perf record --event /tmp/foo.o sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] $ perf evlist /tmp/foo.o $ perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 $ So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok. $ perf report --stdio Error: The perf.data file has no samples! # To display the perf.data header info, please use --header/--header-only options. # $ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:14 +00:00
#include "util/bpf-loader.h"
#include "util/debug.h"
#include "util/event.h"
#include <api/fs/fs.h>
#include <api/fs/tracing_path.h>
#include <errno.h>
#include <pthread.h>
#include <signal.h>
#include <stdlib.h>
#include <time.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <linux/kernel.h>
const char perf_usage_string[] =
"perf [--version] [--help] [OPTIONS] COMMAND [ARGS]";
const char perf_more_info_string[] =
"See 'perf help COMMAND' for more information on a specific command.";
static int use_pager = -1;
const char *input_name;
struct cmd_struct {
const char *cmd;
int (*fn)(int, const char **);
int option;
};
static struct cmd_struct commands[] = {
{ "buildid-cache", cmd_buildid_cache, 0 },
{ "buildid-list", cmd_buildid_list, 0 },
{ "config", cmd_config, 0 },
{ "c2c", cmd_c2c, 0 },
{ "diff", cmd_diff, 0 },
{ "evlist", cmd_evlist, 0 },
{ "help", cmd_help, 0 },
{ "kallsyms", cmd_kallsyms, 0 },
{ "list", cmd_list, 0 },
{ "record", cmd_record, 0 },
{ "report", cmd_report, 0 },
{ "bench", cmd_bench, 0 },
{ "stat", cmd_stat, 0 },
{ "timechart", cmd_timechart, 0 },
{ "top", cmd_top, 0 },
{ "annotate", cmd_annotate, 0 },
{ "version", cmd_version, 0 },
{ "script", cmd_script, 0 },
{ "sched", cmd_sched, 0 },
#ifdef HAVE_LIBELF_SUPPORT
{ "probe", cmd_probe, 0 },
#endif
{ "kmem", cmd_kmem, 0 },
{ "lock", cmd_lock, 0 },
{ "kvm", cmd_kvm, 0 },
{ "test", cmd_test, 0 },
#if defined(HAVE_LIBAUDIT_SUPPORT) || defined(HAVE_SYSCALL_TABLE_SUPPORT)
perf trace: New tool Initially should look loosely like the venerable 'strace' tool, but using the infrastructure in the perf tools to allow tracing extra targets: [acme@sandy linux]$ perf trace --hell Error: unknown option `hell' usage: perf trace <PID> -p, --pid <pid> trace events on existing process id --tid <tid> trace events on existing thread id --all-cpus system-wide collection from all CPUs --cpu <cpu> list of cpus to monitor --no-inherit child tasks do not inherit counters --mmap-pages <n> number of mmap data pages --uid <user> user to profile [acme@sandy linux]$ Those should have the same semantics as when using with 'perf record'. It gets stuck sometimes, but hey, it works sometimes too! In time it should support perf.data based workloads, i.e. it should have a: -o filename Command line option that will produce a perf.data file that can then be used with 'perf trace' or any of the other perf tools (script, report, etc). It will also eventually have the set of functionalities described in the previous 'trace' prototype by Thomas Gleixner: "Announcing a new utility: 'trace'" http://lwn.net/Articles/415728/ Also planned is to have some of the features suggested in the comments of that LWN article. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-26 23:05:56 +00:00
{ "trace", cmd_trace, 0 },
#endif
{ "inject", cmd_inject, 0 },
{ "mem", cmd_mem, 0 },
{ "data", cmd_data, 0 },
perf ftrace: Introduce new 'ftrace' tool The 'perf ftrace' command is a simple wrapper of kernel's ftrace functionality. It only supports single thread tracing currently and just reads trace_pipe in text and then write it to stdout. Committer notes: Testing it: # perf ftrace -f function_graph usleep 123456 <SNIP> 2) | SyS_nanosleep() { 2) | _copy_from_user() { <SNIP> 2) 0.900 us | } 2) 1.354 us | } 2) | hrtimer_nanosleep() { 2) 0.062 us | __hrtimer_init(); 2) | do_nanosleep() { 2) | hrtimer_start_range_ns() { <SNIP> 2) 5.025 us | } 2) | schedule() { 2) 0.125 us | rcu_note_context_switch(); 2) 0.057 us | _raw_spin_lock(); 2) | deactivate_task() { 2) 0.369 us | update_rq_clock.part.77(); 2) | dequeue_task_fair() { <SNIP> 2) + 22.453 us | } 2) + 23.736 us | } 2) | pick_next_task_fair() { <SNIP> 2) + 47.167 us | } 2) | pick_next_task_idle() { <SNIP> 2) 4.462 us | } ------------------------------------------ 2) usleep-20387 => <idle>-0 ------------------------------------------ 2) 0.806 us | switch_mm_irqs_off(); ------------------------------------------ 2) <idle>-0 => usleep-20387 ------------------------------------------ 2) 0.151 us | finish_task_switch(); 2) @ 123597.2 us | } 2) 0.037 us | _cond_resched(); 2) | hrtimer_try_to_cancel() { 2) 0.064 us | hrtimer_active(); 2) 0.353 us | } 2) @ 123605.3 us | } 2) @ 123606.2 us | } 2) @ 123608.3 us | } /* SyS_nanosleep */ 2) | __do_page_fault() { <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremy Eder <jeder@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com>, Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-r1hgmsj4dxny8arn3o9mw512@git.kernel.org [ Various foward port fixes, add man page ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-07 12:45:20 +00:00
{ "ftrace", cmd_ftrace, 0 },
};
struct pager_config {
const char *cmd;
int val;
};
static int pager_command_config(const char *var, const char *value, void *data)
{
struct pager_config *c = data;
if (strstarts(var, "pager.") && !strcmp(var + 6, c->cmd))
c->val = perf_config_bool(var, value);
return 0;
}
/* returns 0 for "no pager", 1 for "use pager", and -1 for "not specified" */
static int check_pager_config(const char *cmd)
{
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 16:44:10 +00:00
int err;
struct pager_config c;
c.cmd = cmd;
c.val = -1;
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 16:44:10 +00:00
err = perf_config(pager_command_config, &c);
return err ?: c.val;
}
static int browser_command_config(const char *var, const char *value, void *data)
{
struct pager_config *c = data;
if (strstarts(var, "tui.") && !strcmp(var + 4, c->cmd))
c->val = perf_config_bool(var, value);
if (strstarts(var, "gtk.") && !strcmp(var + 4, c->cmd))
c->val = perf_config_bool(var, value) ? 2 : 0;
return 0;
}
/*
* returns 0 for "no tui", 1 for "use tui", 2 for "use gtk",
* and -1 for "not specified"
*/
static int check_browser_config(const char *cmd)
{
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 16:44:10 +00:00
int err;
struct pager_config c;
c.cmd = cmd;
c.val = -1;
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 16:44:10 +00:00
err = perf_config(browser_command_config, &c);
return err ?: c.val;
}
static void commit_pager_choice(void)
{
switch (use_pager) {
case 0:
setenv(PERF_PAGER_ENVIRONMENT, "cat", 1);
break;
case 1:
/* setup_pager(); */
break;
default:
break;
}
}
perf tools: Fix the bash completion problem of 'perf --*' The perf-completion.sh uses a predefined string '--help --version --exec-path --html-path --paginate --no-pager --perf-dir --work-tree --debugfs-dir' for the bash completion of 'perf --*', which has two problems: Problem 1: If the options of perf are changed (see handle_options() in perf.c), the perf-completion.sh has to be changed at the same time. If not, the bash completion of 'perf --*' and the options which perf really supports will be inconsistent. Problem 2: When typing another single character after 'perf --', e.g. 'h', and hit TAB key to get the bash completion of 'perf --h', the character 'h' disappears at once. This is not what we want, we wish the bash completion can return '--help --html-path' and then we can continue to choose one. To solve this problem, we add '--list-opts' to perf, which now supports 'perf --list-opts' directly, and its result can be used in bash completion now. Example: Before this patch: $ perf --h <-- hit TAB key after character 'h' $ perf -- <-- 'h' disappears and no required result After this patch: $ perf --h <-- hit TAB key after character 'h' --help --html-path <-- the required result Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1425032491-20224-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 10:21:31 +00:00
struct option options[] = {
OPT_ARGUMENT("help", "help"),
OPT_ARGUMENT("version", "version"),
OPT_ARGUMENT("exec-path", "exec-path"),
OPT_ARGUMENT("html-path", "html-path"),
OPT_ARGUMENT("paginate", "paginate"),
OPT_ARGUMENT("no-pager", "no-pager"),
OPT_ARGUMENT("debugfs-dir", "debugfs-dir"),
OPT_ARGUMENT("buildid-dir", "buildid-dir"),
OPT_ARGUMENT("list-cmds", "list-cmds"),
OPT_ARGUMENT("list-opts", "list-opts"),
OPT_ARGUMENT("debug", "debug"),
OPT_END()
};
static int handle_options(const char ***argv, int *argc, int *envchanged)
{
int handled = 0;
while (*argc > 0) {
const char *cmd = (*argv)[0];
if (cmd[0] != '-')
break;
/*
* For legacy reasons, the "version" and "help"
* commands can be written with "--" prepended
* to make them look like flags.
*/
if (!strcmp(cmd, "--help") || !strcmp(cmd, "--version"))
break;
/*
* Shortcut for '-h' and '-v' options to invoke help
* and version command.
*/
if (!strcmp(cmd, "-h")) {
(*argv)[0] = "--help";
break;
}
if (!strcmp(cmd, "-v")) {
(*argv)[0] = "--version";
break;
}
perf tools: Add 'perf -vv' as an alias to 'perf version --build-options' We keep having bug reports that when users build perf on their own, but they don't install some needed libraries such as libelf, libbfd/libibery. The perf can build, but it is missing important functionality. This patch provides a new option '-vv' for perf which will print the compiled-in status of libraries. The 'perf -vv' is mapped to 'perf version --build-options'. For example: $ ./perf -vv perf version 4.13.rc5.g6727c5 dwarf: [ on ] # HAVE_DWARF_SUPPORT dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT glibc: [ on ] # HAVE_GLIBC_SUPPORT gtk2: [ on ] # HAVE_GTK2_SUPPORT libaudit: [ OFF ] # HAVE_LIBAUDIT_SUPPORT libbfd: [ on ] # HAVE_LIBBFD_SUPPORT libelf: [ on ] # HAVE_LIBELF_SUPPORT libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT libperl: [ on ] # HAVE_LIBPERL_SUPPORT libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT libslang: [ on ] # HAVE_SLANG_SUPPORT libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT zlib: [ on ] # HAVE_ZLIB_SUPPORT lzma: [ on ] # HAVE_LZMA_SUPPORT get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT bpf: [ on ] # HAVE_LIBBPF_SUPPORT v3: One bug is found in v2. It didn't process the option like '-vabc' correctly. Fix this bug. v2: Use a global variable version_verbose to record the number of 'v'. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1522402036-22915-6-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-30 09:27:15 +00:00
if (!strcmp(cmd, "-vv")) {
(*argv)[0] = "version";
version_verbose = 1;
break;
}
/*
* Check remaining flags.
*/
if (strstarts(cmd, CMD_EXEC_PATH)) {
cmd += strlen(CMD_EXEC_PATH);
if (*cmd == '=')
set_argv_exec_path(cmd + 1);
else {
puts(get_argv_exec_path());
exit(0);
}
} else if (!strcmp(cmd, "--html-path")) {
puts(system_path(PERF_HTML_PATH));
exit(0);
} else if (!strcmp(cmd, "-p") || !strcmp(cmd, "--paginate")) {
use_pager = 1;
} else if (!strcmp(cmd, "--no-pager")) {
use_pager = 0;
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--debugfs-dir")) {
if (*argc < 2) {
fprintf(stderr, "No directory given for --debugfs-dir.\n");
usage(perf_usage_string);
}
tracing_path_set((*argv)[1]);
if (envchanged)
*envchanged = 1;
(*argv)++;
(*argc)--;
} else if (!strcmp(cmd, "--buildid-dir")) {
if (*argc < 2) {
fprintf(stderr, "No directory given for --buildid-dir.\n");
usage(perf_usage_string);
}
set_buildid_dir((*argv)[1]);
if (envchanged)
*envchanged = 1;
(*argv)++;
(*argc)--;
} else if (strstarts(cmd, CMD_DEBUGFS_DIR)) {
tracing_path_set(cmd + strlen(CMD_DEBUGFS_DIR));
fprintf(stderr, "dir: %s\n", tracing_path_mount());
if (envchanged)
*envchanged = 1;
} else if (!strcmp(cmd, "--list-cmds")) {
unsigned int i;
for (i = 0; i < ARRAY_SIZE(commands); i++) {
struct cmd_struct *p = commands+i;
printf("%s ", p->cmd);
}
putchar('\n');
exit(0);
perf tools: Fix the bash completion problem of 'perf --*' The perf-completion.sh uses a predefined string '--help --version --exec-path --html-path --paginate --no-pager --perf-dir --work-tree --debugfs-dir' for the bash completion of 'perf --*', which has two problems: Problem 1: If the options of perf are changed (see handle_options() in perf.c), the perf-completion.sh has to be changed at the same time. If not, the bash completion of 'perf --*' and the options which perf really supports will be inconsistent. Problem 2: When typing another single character after 'perf --', e.g. 'h', and hit TAB key to get the bash completion of 'perf --h', the character 'h' disappears at once. This is not what we want, we wish the bash completion can return '--help --html-path' and then we can continue to choose one. To solve this problem, we add '--list-opts' to perf, which now supports 'perf --list-opts' directly, and its result can be used in bash completion now. Example: Before this patch: $ perf --h <-- hit TAB key after character 'h' $ perf -- <-- 'h' disappears and no required result After this patch: $ perf --h <-- hit TAB key after character 'h' --help --html-path <-- the required result Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1425032491-20224-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 10:21:31 +00:00
} else if (!strcmp(cmd, "--list-opts")) {
unsigned int i;
for (i = 0; i < ARRAY_SIZE(options)-1; i++) {
struct option *p = options+i;
printf("--%s ", p->long_name);
}
putchar('\n');
exit(0);
} else if (!strcmp(cmd, "--debug")) {
if (*argc < 2) {
fprintf(stderr, "No variable specified for --debug.\n");
usage(perf_usage_string);
}
if (perf_debug_option((*argv)[1]))
usage(perf_usage_string);
(*argv)++;
(*argc)--;
} else {
fprintf(stderr, "Unknown option: %s\n", cmd);
usage(perf_usage_string);
}
(*argv)++;
(*argc)--;
handled++;
}
return handled;
}
#define RUN_SETUP (1<<0)
#define USE_PAGER (1<<1)
static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
{
int status;
struct stat st;
char sbuf[STRERR_BUFSIZE];
if (use_browser == -1)
use_browser = check_browser_config(p->cmd);
if (use_pager == -1 && p->option & RUN_SETUP)
use_pager = check_pager_config(p->cmd);
if (use_pager == -1 && p->option & USE_PAGER)
use_pager = 1;
commit_pager_choice();
perf bpf: Save bpf_prog_info in a rbtree in perf_env bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com [ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 05:30:42 +00:00
perf_env__init(&perf_env);
perf_env__set_cmdline(&perf_env, argc, argv);
status = p->fn(argc, argv);
perf config: Introduce new init() and exit() Many sub-commands use perf_config() but everytime perf_config() is called, perf_config() always read config files. (i.e. user config '~/.perfconfig' and system config '$(sysconfdir)/perfconfig') But it is better to use the config set that already contains all config key-value pairs to avoid this repetitive work reading the config files in perf_config(). (the config set mean a static variable 'config_set') In other words, if new perf_config__init() is called, only first time 'config_set' is initialized collecting all configs from the config files. And then we could use new perf_config() like old perf_config(). When a sub-command finished, free the config set by perf_config__exit() at run_builtin(). If we do, 'config_set' can be reused wherever perf_config() is called and a feature of old perf_config() is the same as new perf_config() work without the repetitive work that read the config files. In summary, in order to use features about configuration, we can call the functions at perf.c and other source files as below. # initialize a config set perf_config__init() # configure actual variables from a config set perf_config() # eliminate allocated config set perf_config__exit() # destroy existing config set and initialize a new config set. perf_config__refresh() Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1466691272-24117-3-git-send-email-treeze.taeung@gmail.com [ 'init' counterpart is 'exit', not 'finish' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 14:14:31 +00:00
perf_config__exit();
exit_browser(status);
perf_env__exit(&perf_env);
perf tools: Enable passing bpf object file to --event By introducing new rules in tools/perf/util/parse-events.[ly], this patch enables 'perf record --event bpf_file.o' to select events by an eBPF object file. It calls parse_events_load_bpf() to load that file, which uses bpf__prepare_load() and finally calls bpf_object__open() for the object files. After applying this patch, commands like: # perf record --event foo.o sleep become possible. However, at this point it is unable to link any useful things onto the evsel list because the creating of probe points and BPF program attaching have not been implemented. Before real events are possible to be extracted, to avoid perf report error because of empty evsel list, this patch link a dummy evsel. The dummy event related code will be removed when probing and extracting code is ready. Commiter notes: Using it: $ ls -la foo.o ls: cannot access foo.o: No such file or directory $ perf record --event foo.o sleep libbpf: failed to open foo.o: No such file or directory event syntax error: 'foo.o' \___ BPF object file 'foo.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/build/perf/perf.o /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped $ perf record --event /tmp/build/perf/perf.o sleep libbpf: /tmp/build/perf/perf.o is not an eBPF object file event syntax error: '/tmp/build/perf/perf.o' \___ BPF object file '/tmp/build/perf/perf.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/foo.o /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped $ perf record --event /tmp/foo.o sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] $ perf evlist /tmp/foo.o $ perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 $ So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok. $ perf report --stdio Error: The perf.data file has no samples! # To display the perf.data header info, please use --header/--header-only options. # $ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 12:41:14 +00:00
bpf__clear();
if (status)
return status & 0xff;
/* Somebody closed stdout? */
if (fstat(fileno(stdout), &st))
return 0;
/* Ignore write errors for pipes and sockets.. */
if (S_ISFIFO(st.st_mode) || S_ISSOCK(st.st_mode))
return 0;
status = 1;
/* Check for ENOSPC and EIO errors.. */
if (fflush(stdout)) {
fprintf(stderr, "write failure on standard output: %s",
str_error_r(errno, sbuf, sizeof(sbuf)));
goto out;
}
if (ferror(stdout)) {
fprintf(stderr, "unknown write failure on standard output");
goto out;
}
if (fclose(stdout)) {
fprintf(stderr, "close failed on standard output: %s",
str_error_r(errno, sbuf, sizeof(sbuf)));
goto out;
}
status = 0;
out:
return status;
}
static void handle_internal_command(int argc, const char **argv)
{
const char *cmd = argv[0];
unsigned int i;
/* Turn "perf cmd --help" into "perf help cmd" */
if (argc > 1 && !strcmp(argv[1], "--help")) {
argv[1] = argv[0];
argv[0] = cmd = "help";
}
for (i = 0; i < ARRAY_SIZE(commands); i++) {
struct cmd_struct *p = commands+i;
if (strcmp(p->cmd, cmd))
continue;
exit(run_builtin(p, argc, argv));
}
}
static void execv_dashed_external(const char **argv)
{
char *cmd;
const char *tmp;
int status;
if (asprintf(&cmd, "perf-%s", argv[0]) < 0)
goto do_die;
/*
* argv[0] must be the perf command, but the argv array
* belongs to the caller, and may be reused in
* subsequent loop iterations. Save argv[0] and
* restore it on error.
*/
tmp = argv[0];
argv[0] = cmd;
/*
* if we fail because the command is not found, it is
* OK to return. Otherwise, we just pass along the status code.
*/
status = run_command_v_opt(argv, 0);
if (status != -ERR_RUN_COMMAND_EXEC) {
if (IS_RUN_COMMAND_ERR(status)) {
do_die:
pr_err("FATAL: unable to run '%s'", argv[0]);
status = -128;
}
exit(-status);
}
errno = ENOENT; /* as if we called execvp */
argv[0] = tmp;
zfree(&cmd);
}
static int run_argv(int *argcp, const char ***argv)
{
/* See if it's an internal command */
handle_internal_command(*argcp, *argv);
/* .. then try the external ones */
execv_dashed_external(*argv);
return 0;
}
static void pthread__block_sigwinch(void)
{
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGWINCH);
pthread_sigmask(SIG_BLOCK, &set, NULL);
}
void pthread__unblock_sigwinch(void)
{
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGWINCH);
pthread_sigmask(SIG_UNBLOCK, &set, NULL);
}
int main(int argc, const char **argv)
{
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 16:44:10 +00:00
int err;
const char *cmd;
char sbuf[STRERR_BUFSIZE];
/* libsubcmd init */
exec_cmd_init("perf", PREFIX, PERF_EXEC_PATH, EXEC_PATH_ENVIRONMENT);
pager_init(PERF_PAGER_ENVIRONMENT);
/* The page_size is placed in util object. */
page_size = sysconf(_SC_PAGE_SIZE);
cmd = extract_argv0_path(argv[0]);
if (!cmd)
cmd = "perf-help";
srandom(time(NULL));
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 16:44:10 +00:00
err = perf_config(perf_default_config, NULL);
if (err)
return err;
set_buildid_dir(NULL);
/*
* "perf-xxxx" is the same as "perf xxxx", but we obviously:
*
* - cannot take flags in between the "perf" and the "xxxx".
* - cannot execute it externally (since it would just do
* the same thing over again)
*
* So we just directly call the internal command handler. If that one
* fails to handle this, then maybe we just run a renamed perf binary
* that contains a dash in its name. To handle this scenario, we just
* fall through and ignore the "xxxx" part of the command string.
*/
if (strstarts(cmd, "perf-")) {
cmd += 5;
argv[0] = cmd;
handle_internal_command(argc, argv);
/*
* If the command is handled, the above function does not
* return undo changes and fall through in such a case.
*/
cmd -= 5;
argv[0] = cmd;
}
if (strstarts(cmd, "trace")) {
#if defined(HAVE_LIBAUDIT_SUPPORT) || defined(HAVE_SYSCALL_TABLE_SUPPORT)
perf trace: Add 'trace' alias to 'perf trace' Make 'perf trace' more accessible by aliasing it to just 'trace': [root@zoo linux]# trace --duration 15 -a -e futex sleep 1 110.092 (16.188 ms): libvirtd/1166 futex(uaddr: 0x185b344, op: WAIT|PRIV, val: 174293 ) = 0 110.101 (15.903 ms): libvirtd/1171 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139265 ) = 0 111.594 (15.776 ms): libvirtd/1165 futex(uaddr: 0x185b344, op: WAIT|PRIV, val: 174295 ) = 0 111.610 (15.969 ms): libvirtd/1169 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139267 ) = 0 113.556 (16.216 ms): libvirtd/1168 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139269 ) = 0 291.265 (199.508 ms): chromium-brows/15830 futex(uaddr: 0x7fff2986bcb4, op: WAIT_BITSET|PRIV|CLKRT, val: 1, utime: 0x7fff2986bab0, val3: 4294967295) = -1 ETIMEDOUT Connection timed out 360.354 (69.053 ms): chromium-brows/15830 futex(uaddr: 0x7fff2986bcb4, op: WAIT_BITSET|PRIV|CLKRT, val: 1, utime: 0x7fff2986bab0, val3: 4294967295) = -1 ETIMEDOUT Connection timed out [root@zoo linux]# I.e. looking for futex calls that take at least 15ms, system wide, during a one second window. Now to get callchains into 'trace' to figure out what are those locks :-) Requested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ch4smqz8b5fmgrte7c5e4fuw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-09-24 14:56:36 +00:00
setup_path();
argv[0] = "trace";
return cmd_trace(argc, argv);
#else
fprintf(stderr,
"trace command not available: missing audit-libs devel package at build time.\n");
goto out;
perf trace: Add 'trace' alias to 'perf trace' Make 'perf trace' more accessible by aliasing it to just 'trace': [root@zoo linux]# trace --duration 15 -a -e futex sleep 1 110.092 (16.188 ms): libvirtd/1166 futex(uaddr: 0x185b344, op: WAIT|PRIV, val: 174293 ) = 0 110.101 (15.903 ms): libvirtd/1171 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139265 ) = 0 111.594 (15.776 ms): libvirtd/1165 futex(uaddr: 0x185b344, op: WAIT|PRIV, val: 174295 ) = 0 111.610 (15.969 ms): libvirtd/1169 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139267 ) = 0 113.556 (16.216 ms): libvirtd/1168 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139269 ) = 0 291.265 (199.508 ms): chromium-brows/15830 futex(uaddr: 0x7fff2986bcb4, op: WAIT_BITSET|PRIV|CLKRT, val: 1, utime: 0x7fff2986bab0, val3: 4294967295) = -1 ETIMEDOUT Connection timed out 360.354 (69.053 ms): chromium-brows/15830 futex(uaddr: 0x7fff2986bcb4, op: WAIT_BITSET|PRIV|CLKRT, val: 1, utime: 0x7fff2986bab0, val3: 4294967295) = -1 ETIMEDOUT Connection timed out [root@zoo linux]# I.e. looking for futex calls that take at least 15ms, system wide, during a one second window. Now to get callchains into 'trace' to figure out what are those locks :-) Requested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ch4smqz8b5fmgrte7c5e4fuw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-09-24 14:56:36 +00:00
#endif
}
/* Look for flags.. */
argv++;
argc--;
handle_options(&argv, &argc, NULL);
commit_pager_choice();
perf buildid: add perfconfig option to specify buildid cache dir This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-01 19:25:01 +00:00
if (argc > 0) {
if (strstarts(argv[0], "--"))
argv[0] += 2;
} else {
/* The user didn't specify a command; give them help */
printf("\n usage: %s\n\n", perf_usage_string);
list_common_cmds_help();
printf("\n %s\n\n", perf_more_info_string);
goto out;
}
cmd = argv[0];
test_attr__init();
/*
* We use PATH to find perf commands, but we prepend some higher
* precedence paths: the "--exec-path" option, the PERF_EXEC_PATH
* environment, and the $(perfexecdir) from the Makefile at build
* time.
*/
setup_path();
/*
* Block SIGWINCH notifications so that the thread that wants it can
* unblock and get syscalls like select interrupted instead of waiting
* forever while the signal goes to some other non interested thread.
*/
pthread__block_sigwinch();
perf_debug_setup();
while (1) {
static int done_help;
run_argv(&argc, &argv);
if (errno != ENOENT)
break;
if (!done_help) {
cmd = argv[0] = help_unknown_cmd(cmd);
done_help = 1;
} else
break;
}
fprintf(stderr, "Failed to run command '%s': %s\n",
cmd, str_error_r(errno, sbuf, sizeof(sbuf)));
out:
return 1;
}