2017-11-06 17:11:51 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
2016-01-14 01:15:43 +00:00
|
|
|
/*
|
|
|
|
* PIC32 Integrated Serial Driver.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2015 Microchip Technology, Inc.
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_device.h>
|
|
|
|
#include <linux/of_irq.h>
|
|
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/console.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/tty.h>
|
|
|
|
#include <linux/tty_flip.h>
|
|
|
|
#include <linux/serial_core.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
|
|
|
#include <asm/mach-pic32/pic32.h>
|
|
|
|
#include "pic32_uart.h"
|
|
|
|
|
|
|
|
/* UART name and device definitions */
|
|
|
|
#define PIC32_DEV_NAME "pic32-uart"
|
|
|
|
#define PIC32_MAX_UARTS 6
|
|
|
|
#define PIC32_SDEV_NAME "ttyPIC"
|
|
|
|
|
|
|
|
/* pic32_sport pointer for console use */
|
|
|
|
static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS];
|
|
|
|
|
|
|
|
static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport)
|
|
|
|
{
|
|
|
|
/* wait for tx empty, otherwise chars will be lost or corrupted */
|
|
|
|
while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT))
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int pic32_enable_clock(struct pic32_sport *sport)
|
|
|
|
{
|
|
|
|
int ret = clk_prepare_enable(sport->clk);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
sport->ref_clk++;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void pic32_disable_clock(struct pic32_sport *sport)
|
|
|
|
{
|
|
|
|
sport->ref_clk--;
|
|
|
|
clk_disable_unprepare(sport->clk);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to check if uart tx buffer is empty */
|
|
|
|
static unsigned int pic32_uart_tx_empty(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
u32 val = pic32_uart_readl(sport, PIC32_UART_STA);
|
|
|
|
|
|
|
|
return (val & PIC32_UART_STA_TRMT) ? 1 : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to set UART outputs */
|
|
|
|
static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
|
|
|
|
/* set loopback mode */
|
|
|
|
if (mctrl & TIOCM_LOOP)
|
|
|
|
pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_LPBK);
|
|
|
|
else
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_LPBK);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* get the state of CTS input pin for this port */
|
|
|
|
static unsigned int get_cts_state(struct pic32_sport *sport)
|
|
|
|
{
|
|
|
|
/* read and invert UxCTS */
|
|
|
|
if (gpio_is_valid(sport->cts_gpio))
|
|
|
|
return !gpio_get_value(sport->cts_gpio);
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to return the state of misc UART input pins */
|
|
|
|
static unsigned int pic32_uart_get_mctrl(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
unsigned int mctrl = 0;
|
|
|
|
|
|
|
|
if (!sport->hw_flow_ctrl)
|
|
|
|
mctrl |= TIOCM_CTS;
|
|
|
|
else if (get_cts_state(sport))
|
|
|
|
mctrl |= TIOCM_CTS;
|
|
|
|
|
|
|
|
/* DSR and CD are not supported in PIC32, so return 1
|
|
|
|
* RI is not supported in PIC32, so return 0
|
|
|
|
*/
|
|
|
|
mctrl |= TIOCM_CD;
|
|
|
|
mctrl |= TIOCM_DSR;
|
|
|
|
|
|
|
|
return mctrl;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* stop tx and start tx are not called in pairs, therefore a flag indicates
|
|
|
|
* the status of irq to control the irq-depth.
|
|
|
|
*/
|
|
|
|
static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en)
|
|
|
|
{
|
|
|
|
if (en && !tx_irq_enabled(sport)) {
|
|
|
|
enable_irq(sport->irq_tx);
|
|
|
|
tx_irq_enabled(sport) = 1;
|
|
|
|
} else if (!en && tx_irq_enabled(sport)) {
|
|
|
|
/* use disable_irq_nosync() and not disable_irq() to avoid self
|
|
|
|
* imposed deadlock by not waiting for irq handler to end,
|
|
|
|
* since this callback is called from interrupt context.
|
|
|
|
*/
|
|
|
|
disable_irq_nosync(sport->irq_tx);
|
|
|
|
tx_irq_enabled(sport) = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to disable tx ASAP (used for flow control) */
|
|
|
|
static void pic32_uart_stop_tx(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
|
|
|
|
if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* wait for tx empty */
|
|
|
|
pic32_wait_deplete_txbuf(sport);
|
|
|
|
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_UTXEN);
|
|
|
|
pic32_uart_irqtxen(sport, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to (re)enable tx */
|
|
|
|
static void pic32_uart_start_tx(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
|
|
|
|
pic32_uart_irqtxen(sport, 1);
|
|
|
|
pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_UTXEN);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to stop rx, called before port shutdown */
|
|
|
|
static void pic32_uart_stop_rx(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
|
|
|
|
/* disable rx interrupts */
|
|
|
|
disable_irq(sport->irq_rx);
|
|
|
|
|
|
|
|
/* receiver Enable bit OFF */
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_URXEN);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to start/stop emitting break char */
|
|
|
|
static void pic32_uart_break_ctl(struct uart_port *port, int ctl)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
|
|
|
|
if (ctl)
|
|
|
|
pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_UTXBRK);
|
|
|
|
else
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_UTXBRK);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* get port type in string format */
|
|
|
|
static const char *pic32_uart_type(struct uart_port *port)
|
|
|
|
{
|
|
|
|
return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* read all chars in rx fifo and send them to core */
|
|
|
|
static void pic32_uart_do_rx(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
struct tty_port *tty;
|
|
|
|
unsigned int max_count;
|
|
|
|
|
|
|
|
/* limit number of char read in interrupt, should not be
|
|
|
|
* higher than fifo size anyway since we're much faster than
|
|
|
|
* serial port
|
|
|
|
*/
|
|
|
|
max_count = PIC32_UART_RX_FIFO_DEPTH;
|
|
|
|
|
|
|
|
spin_lock(&port->lock);
|
|
|
|
|
|
|
|
tty = &port->state->port;
|
|
|
|
|
|
|
|
do {
|
|
|
|
u32 sta_reg, c;
|
|
|
|
char flag;
|
|
|
|
|
|
|
|
/* get overrun/fifo empty information from status register */
|
|
|
|
sta_reg = pic32_uart_readl(sport, PIC32_UART_STA);
|
|
|
|
if (unlikely(sta_reg & PIC32_UART_STA_OERR)) {
|
|
|
|
|
|
|
|
/* fifo reset is required to clear interrupt */
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_OERR);
|
|
|
|
|
|
|
|
port->icount.overrun++;
|
|
|
|
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Can at least one more character can be read? */
|
|
|
|
if (!(sta_reg & PIC32_UART_STA_URXDA))
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* read the character and increment the rx counter */
|
|
|
|
c = pic32_uart_readl(sport, PIC32_UART_RX);
|
|
|
|
|
|
|
|
port->icount.rx++;
|
|
|
|
flag = TTY_NORMAL;
|
|
|
|
c &= 0xff;
|
|
|
|
|
|
|
|
if (unlikely((sta_reg & PIC32_UART_STA_PERR) ||
|
|
|
|
(sta_reg & PIC32_UART_STA_FERR))) {
|
|
|
|
|
|
|
|
/* do stats first */
|
|
|
|
if (sta_reg & PIC32_UART_STA_PERR)
|
|
|
|
port->icount.parity++;
|
|
|
|
if (sta_reg & PIC32_UART_STA_FERR)
|
|
|
|
port->icount.frame++;
|
|
|
|
|
|
|
|
/* update flag wrt read_status_mask */
|
|
|
|
sta_reg &= port->read_status_mask;
|
|
|
|
|
|
|
|
if (sta_reg & PIC32_UART_STA_FERR)
|
|
|
|
flag = TTY_FRAME;
|
|
|
|
if (sta_reg & PIC32_UART_STA_PERR)
|
|
|
|
flag = TTY_PARITY;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (uart_handle_sysrq_char(port, c))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if ((sta_reg & port->ignore_status_mask) == 0)
|
|
|
|
tty_insert_flip_char(tty, c, flag);
|
|
|
|
|
|
|
|
} while (--max_count);
|
|
|
|
|
|
|
|
spin_unlock(&port->lock);
|
|
|
|
|
|
|
|
tty_flip_buffer_push(tty);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* fill tx fifo with chars to send, stop when fifo is about to be full
|
|
|
|
* or when all chars have been sent.
|
|
|
|
*/
|
|
|
|
static void pic32_uart_do_tx(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
|
|
unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH;
|
|
|
|
|
|
|
|
if (port->x_char) {
|
|
|
|
pic32_uart_writel(sport, PIC32_UART_TX, port->x_char);
|
|
|
|
port->icount.tx++;
|
|
|
|
port->x_char = 0;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (uart_tx_stopped(port)) {
|
|
|
|
pic32_uart_stop_tx(port);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (uart_circ_empty(xmit))
|
|
|
|
goto txq_empty;
|
|
|
|
|
|
|
|
/* keep stuffing chars into uart tx buffer
|
|
|
|
* 1) until uart fifo is full
|
|
|
|
* or
|
|
|
|
* 2) until the circ buffer is empty
|
|
|
|
* (all chars have been sent)
|
|
|
|
* or
|
|
|
|
* 3) until the max count is reached
|
|
|
|
* (prevents lingering here for too long in certain cases)
|
|
|
|
*/
|
|
|
|
while (!(PIC32_UART_STA_UTXBF &
|
|
|
|
pic32_uart_readl(sport, PIC32_UART_STA))) {
|
|
|
|
unsigned int c = xmit->buf[xmit->tail];
|
|
|
|
|
|
|
|
pic32_uart_writel(sport, PIC32_UART_TX, c);
|
|
|
|
|
|
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
|
|
port->icount.tx++;
|
|
|
|
if (uart_circ_empty(xmit))
|
|
|
|
break;
|
|
|
|
if (--max_count == 0)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
|
|
uart_write_wakeup(port);
|
|
|
|
|
|
|
|
if (uart_circ_empty(xmit))
|
|
|
|
goto txq_empty;
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
txq_empty:
|
|
|
|
pic32_uart_irqtxen(sport, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* RX interrupt handler */
|
|
|
|
static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct uart_port *port = dev_id;
|
|
|
|
|
|
|
|
pic32_uart_do_rx(port);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* TX interrupt handler */
|
|
|
|
static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct uart_port *port = dev_id;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
pic32_uart_do_tx(port);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* FAULT interrupt handler */
|
|
|
|
static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
/* do nothing: pic32_uart_do_rx() handles faults. */
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* enable rx & tx operation on uart */
|
|
|
|
static void pic32_uart_en_and_unmask(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
|
|
|
|
pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
|
|
|
|
pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_ON);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* disable rx & tx operation on uart */
|
|
|
|
static void pic32_uart_dsbl_and_mask(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
|
|
|
|
/* wait for tx empty, otherwise chars will be lost or corrupted */
|
|
|
|
pic32_wait_deplete_txbuf(sport);
|
|
|
|
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN);
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_ON);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to initialize uart and start rx operation */
|
|
|
|
static int pic32_uart_startup(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1;
|
|
|
|
unsigned long flags;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
|
|
|
|
ret = pic32_enable_clock(sport);
|
|
|
|
if (ret) {
|
|
|
|
local_irq_restore(flags);
|
|
|
|
goto out_done;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* clear status and mode registers */
|
|
|
|
pic32_uart_writel(sport, PIC32_UART_MODE, 0);
|
|
|
|
pic32_uart_writel(sport, PIC32_UART_STA, 0);
|
|
|
|
|
|
|
|
/* disable uart and mask all interrupts */
|
|
|
|
pic32_uart_dsbl_and_mask(port);
|
|
|
|
|
|
|
|
/* set default baud */
|
|
|
|
pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud);
|
|
|
|
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
|
|
/* Each UART of a PIC32 has three interrupts therefore,
|
|
|
|
* we setup driver to register the 3 irqs for the device.
|
|
|
|
*
|
|
|
|
* For each irq request_irq() is called with interrupt disabled.
|
|
|
|
* And the irq is enabled as soon as we are ready to handle them.
|
|
|
|
*/
|
|
|
|
tx_irq_enabled(sport) = 0;
|
|
|
|
|
|
|
|
sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault",
|
|
|
|
pic32_uart_type(port),
|
|
|
|
sport->idx);
|
|
|
|
if (!sport->irq_fault_name) {
|
|
|
|
dev_err(port->dev, "%s: kasprintf err!", __func__);
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out_done;
|
|
|
|
}
|
|
|
|
irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN);
|
|
|
|
ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt,
|
|
|
|
sport->irqflags_fault, sport->irq_fault_name, port);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
|
|
|
|
__func__, sport->irq_fault, ret,
|
|
|
|
pic32_uart_type(port));
|
|
|
|
goto out_f;
|
|
|
|
}
|
|
|
|
|
|
|
|
sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx",
|
|
|
|
pic32_uart_type(port),
|
|
|
|
sport->idx);
|
|
|
|
if (!sport->irq_rx_name) {
|
|
|
|
dev_err(port->dev, "%s: kasprintf err!", __func__);
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out_f;
|
|
|
|
}
|
|
|
|
irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN);
|
|
|
|
ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt,
|
|
|
|
sport->irqflags_rx, sport->irq_rx_name, port);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
|
|
|
|
__func__, sport->irq_rx, ret,
|
|
|
|
pic32_uart_type(port));
|
|
|
|
goto out_r;
|
|
|
|
}
|
|
|
|
|
|
|
|
sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx",
|
|
|
|
pic32_uart_type(port),
|
|
|
|
sport->idx);
|
|
|
|
if (!sport->irq_tx_name) {
|
|
|
|
dev_err(port->dev, "%s: kasprintf err!", __func__);
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out_r;
|
|
|
|
}
|
|
|
|
irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN);
|
|
|
|
ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt,
|
|
|
|
sport->irqflags_tx, sport->irq_tx_name, port);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n",
|
|
|
|
__func__, sport->irq_tx, ret,
|
|
|
|
pic32_uart_type(port));
|
|
|
|
goto out_t;
|
|
|
|
}
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
|
|
|
|
/* set rx interrupt on first receive */
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0);
|
|
|
|
|
|
|
|
/* set interrupt on empty */
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA),
|
|
|
|
PIC32_UART_STA_UTXISEL1);
|
|
|
|
|
|
|
|
/* enable all interrupts and eanable uart */
|
|
|
|
pic32_uart_en_and_unmask(port);
|
|
|
|
|
|
|
|
enable_irq(sport->irq_rx);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_t:
|
|
|
|
kfree(sport->irq_tx_name);
|
2016-12-18 06:38:11 +00:00
|
|
|
free_irq(sport->irq_tx, port);
|
2016-01-14 01:15:43 +00:00
|
|
|
out_r:
|
|
|
|
kfree(sport->irq_rx_name);
|
2016-12-18 06:38:11 +00:00
|
|
|
free_irq(sport->irq_rx, port);
|
2016-01-14 01:15:43 +00:00
|
|
|
out_f:
|
|
|
|
kfree(sport->irq_fault_name);
|
2016-12-18 06:38:11 +00:00
|
|
|
free_irq(sport->irq_fault, port);
|
2016-01-14 01:15:43 +00:00
|
|
|
out_done:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to flush & disable uart */
|
|
|
|
static void pic32_uart_shutdown(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
/* disable uart */
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
pic32_uart_dsbl_and_mask(port);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
pic32_disable_clock(sport);
|
|
|
|
|
|
|
|
/* free all 3 interrupts for this UART */
|
|
|
|
free_irq(sport->irq_fault, port);
|
|
|
|
free_irq(sport->irq_tx, port);
|
|
|
|
free_irq(sport->irq_rx, port);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to change current uart setting */
|
|
|
|
static void pic32_uart_set_termios(struct uart_port *port,
|
|
|
|
struct ktermios *new,
|
|
|
|
struct ktermios *old)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
unsigned int baud;
|
|
|
|
unsigned int quot;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
|
|
|
|
/* disable uart and mask all interrupts while changing speed */
|
|
|
|
pic32_uart_dsbl_and_mask(port);
|
|
|
|
|
|
|
|
/* stop bit options */
|
|
|
|
if (new->c_cflag & CSTOPB)
|
|
|
|
pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_STSEL);
|
|
|
|
else
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_STSEL);
|
|
|
|
|
|
|
|
/* parity options */
|
|
|
|
if (new->c_cflag & PARENB) {
|
|
|
|
if (new->c_cflag & PARODD) {
|
|
|
|
pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_PDSEL1);
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_PDSEL0);
|
|
|
|
} else {
|
|
|
|
pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_PDSEL0);
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_PDSEL1);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_PDSEL1 |
|
|
|
|
PIC32_UART_MODE_PDSEL0);
|
|
|
|
}
|
|
|
|
/* if hw flow ctrl, then the pins must be specified in device tree */
|
|
|
|
if ((new->c_cflag & CRTSCTS) && sport->hw_flow_ctrl) {
|
|
|
|
/* enable hardware flow control */
|
|
|
|
pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_UEN1);
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_UEN0);
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_RTSMD);
|
|
|
|
} else {
|
|
|
|
/* disable hardware flow control */
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_UEN1);
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_UEN0);
|
|
|
|
pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE),
|
|
|
|
PIC32_UART_MODE_RTSMD);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Always 8-bit */
|
|
|
|
new->c_cflag |= CS8;
|
|
|
|
|
|
|
|
/* Mark/Space parity is not supported */
|
|
|
|
new->c_cflag &= ~CMSPAR;
|
|
|
|
|
|
|
|
/* update baud */
|
|
|
|
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
|
|
|
|
quot = uart_get_divisor(port, baud) - 1;
|
|
|
|
pic32_uart_writel(sport, PIC32_UART_BRG, quot);
|
|
|
|
uart_update_timeout(port, new->c_cflag, baud);
|
|
|
|
|
|
|
|
if (tty_termios_baud_rate(new))
|
|
|
|
tty_termios_encode_baud_rate(new, baud, baud);
|
|
|
|
|
|
|
|
/* enable uart */
|
|
|
|
pic32_uart_en_and_unmask(port);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to claim uart iomem */
|
|
|
|
static int pic32_uart_request_port(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev = to_platform_device(port->dev);
|
|
|
|
struct resource *res_mem;
|
|
|
|
|
|
|
|
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (unlikely(!res_mem))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (!request_mem_region(port->mapbase, resource_size(res_mem),
|
|
|
|
"pic32_uart_mem"))
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
|
|
|
|
resource_size(res_mem));
|
|
|
|
if (!port->membase) {
|
|
|
|
dev_err(port->dev, "Unable to map registers\n");
|
|
|
|
release_mem_region(port->mapbase, resource_size(res_mem));
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to release uart iomem */
|
|
|
|
static void pic32_uart_release_port(struct uart_port *port)
|
|
|
|
{
|
|
|
|
struct platform_device *pdev = to_platform_device(port->dev);
|
|
|
|
struct resource *res_mem;
|
|
|
|
unsigned int res_size;
|
|
|
|
|
|
|
|
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (unlikely(!res_mem))
|
|
|
|
return;
|
|
|
|
res_size = resource_size(res_mem);
|
|
|
|
|
|
|
|
release_mem_region(port->mapbase, res_size);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to do any port required auto-configuration */
|
|
|
|
static void pic32_uart_config_port(struct uart_port *port, int flags)
|
|
|
|
{
|
|
|
|
if (flags & UART_CONFIG_TYPE) {
|
|
|
|
if (pic32_uart_request_port(port))
|
|
|
|
return;
|
|
|
|
port->type = PORT_PIC32;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core request to check that port information in serinfo are suitable */
|
|
|
|
static int pic32_uart_verify_port(struct uart_port *port,
|
|
|
|
struct serial_struct *serinfo)
|
|
|
|
{
|
|
|
|
if (port->type != PORT_PIC32)
|
|
|
|
return -EINVAL;
|
|
|
|
if (port->irq != serinfo->irq)
|
|
|
|
return -EINVAL;
|
|
|
|
if (port->iotype != serinfo->io_type)
|
|
|
|
return -EINVAL;
|
|
|
|
if (port->mapbase != (unsigned long)serinfo->iomem_base)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* serial core callbacks */
|
|
|
|
static const struct uart_ops pic32_uart_ops = {
|
|
|
|
.tx_empty = pic32_uart_tx_empty,
|
|
|
|
.get_mctrl = pic32_uart_get_mctrl,
|
|
|
|
.set_mctrl = pic32_uart_set_mctrl,
|
|
|
|
.start_tx = pic32_uart_start_tx,
|
|
|
|
.stop_tx = pic32_uart_stop_tx,
|
|
|
|
.stop_rx = pic32_uart_stop_rx,
|
|
|
|
.break_ctl = pic32_uart_break_ctl,
|
|
|
|
.startup = pic32_uart_startup,
|
|
|
|
.shutdown = pic32_uart_shutdown,
|
|
|
|
.set_termios = pic32_uart_set_termios,
|
|
|
|
.type = pic32_uart_type,
|
|
|
|
.release_port = pic32_uart_release_port,
|
|
|
|
.request_port = pic32_uart_request_port,
|
|
|
|
.config_port = pic32_uart_config_port,
|
|
|
|
.verify_port = pic32_uart_verify_port,
|
|
|
|
};
|
|
|
|
|
|
|
|
#ifdef CONFIG_SERIAL_PIC32_CONSOLE
|
|
|
|
/* output given char */
|
|
|
|
static void pic32_console_putchar(struct uart_port *port, int ch)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
|
|
|
|
if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* wait for tx empty */
|
|
|
|
pic32_wait_deplete_txbuf(sport);
|
|
|
|
|
|
|
|
pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* console core request to output given string */
|
|
|
|
static void pic32_console_write(struct console *co, const char *s,
|
|
|
|
unsigned int count)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport = pic32_sports[co->index];
|
|
|
|
struct uart_port *port = pic32_get_port(sport);
|
|
|
|
|
|
|
|
/* call uart helper to deal with \r\n */
|
|
|
|
uart_console_write(port, s, count, pic32_console_putchar);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* console core request to setup given console, find matching uart
|
|
|
|
* port and setup it.
|
|
|
|
*/
|
|
|
|
static int pic32_console_setup(struct console *co, char *options)
|
|
|
|
{
|
|
|
|
struct pic32_sport *sport;
|
|
|
|
struct uart_port *port = NULL;
|
|
|
|
int baud = 115200;
|
|
|
|
int bits = 8;
|
|
|
|
int parity = 'n';
|
|
|
|
int flow = 'n';
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS))
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
sport = pic32_sports[co->index];
|
|
|
|
if (!sport)
|
|
|
|
return -ENODEV;
|
|
|
|
port = pic32_get_port(sport);
|
|
|
|
|
|
|
|
ret = pic32_enable_clock(sport);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (options)
|
|
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
|
|
|
|
return uart_set_options(port, co, baud, parity, bits, flow);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct uart_driver pic32_uart_driver;
|
|
|
|
static struct console pic32_console = {
|
|
|
|
.name = PIC32_SDEV_NAME,
|
|
|
|
.write = pic32_console_write,
|
|
|
|
.device = uart_console_device,
|
|
|
|
.setup = pic32_console_setup,
|
|
|
|
.flags = CON_PRINTBUFFER,
|
|
|
|
.index = -1,
|
|
|
|
.data = &pic32_uart_driver,
|
|
|
|
};
|
|
|
|
#define PIC32_SCONSOLE (&pic32_console)
|
|
|
|
|
|
|
|
static int __init pic32_console_init(void)
|
|
|
|
{
|
|
|
|
register_console(&pic32_console);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
console_initcall(pic32_console_init);
|
|
|
|
|
|
|
|
static inline bool is_pic32_console_port(struct uart_port *port)
|
|
|
|
{
|
|
|
|
return port->cons && port->cons->index == port->line;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Late console initialization.
|
|
|
|
*/
|
|
|
|
static int __init pic32_late_console_init(void)
|
|
|
|
{
|
|
|
|
if (!(pic32_console.flags & CON_ENABLED))
|
|
|
|
register_console(&pic32_console);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
core_initcall(pic32_late_console_init);
|
|
|
|
|
|
|
|
#else
|
|
|
|
#define PIC32_SCONSOLE NULL
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static struct uart_driver pic32_uart_driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.driver_name = PIC32_DEV_NAME,
|
|
|
|
.dev_name = PIC32_SDEV_NAME,
|
|
|
|
.nr = PIC32_MAX_UARTS,
|
|
|
|
.cons = PIC32_SCONSOLE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int pic32_uart_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
struct pic32_sport *sport;
|
|
|
|
int uart_idx = 0;
|
|
|
|
struct resource *res_mem;
|
|
|
|
struct uart_port *port;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
uart_idx = of_alias_get_id(np, "serial");
|
|
|
|
if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res_mem)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
|
|
|
|
if (!sport)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
sport->idx = uart_idx;
|
|
|
|
sport->irq_fault = irq_of_parse_and_map(np, 0);
|
|
|
|
sport->irqflags_fault = IRQF_NO_THREAD;
|
|
|
|
sport->irq_rx = irq_of_parse_and_map(np, 1);
|
|
|
|
sport->irqflags_rx = IRQF_NO_THREAD;
|
|
|
|
sport->irq_tx = irq_of_parse_and_map(np, 2);
|
|
|
|
sport->irqflags_tx = IRQF_NO_THREAD;
|
|
|
|
sport->clk = devm_clk_get(&pdev->dev, NULL);
|
|
|
|
sport->cts_gpio = -EINVAL;
|
|
|
|
sport->dev = &pdev->dev;
|
|
|
|
|
|
|
|
/* Hardware flow control: gpios
|
|
|
|
* !Note: Basically, CTS is needed for reading the status.
|
|
|
|
*/
|
|
|
|
sport->hw_flow_ctrl = false;
|
|
|
|
sport->cts_gpio = of_get_named_gpio(np, "cts-gpios", 0);
|
|
|
|
if (gpio_is_valid(sport->cts_gpio)) {
|
|
|
|
sport->hw_flow_ctrl = true;
|
|
|
|
|
|
|
|
ret = devm_gpio_request(sport->dev,
|
|
|
|
sport->cts_gpio, "CTS");
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"error requesting CTS GPIO\n");
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = gpio_direction_input(sport->cts_gpio);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "error setting CTS GPIO\n");
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
pic32_sports[uart_idx] = sport;
|
|
|
|
port = &sport->port;
|
|
|
|
memset(port, 0, sizeof(*port));
|
|
|
|
port->iotype = UPIO_MEM;
|
|
|
|
port->mapbase = res_mem->start;
|
|
|
|
port->ops = &pic32_uart_ops;
|
|
|
|
port->flags = UPF_BOOT_AUTOCONF;
|
|
|
|
port->dev = &pdev->dev;
|
|
|
|
port->fifosize = PIC32_UART_TX_FIFO_DEPTH;
|
|
|
|
port->uartclk = clk_get_rate(sport->clk);
|
|
|
|
port->line = uart_idx;
|
|
|
|
|
|
|
|
ret = uart_add_one_port(&pic32_uart_driver, port);
|
|
|
|
if (ret) {
|
|
|
|
port->membase = NULL;
|
|
|
|
dev_err(port->dev, "%s: uart add port error!\n", __func__);
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_SERIAL_PIC32_CONSOLE
|
|
|
|
if (is_pic32_console_port(port) &&
|
|
|
|
(pic32_console.flags & CON_ENABLED)) {
|
|
|
|
/* The peripheral clock has been enabled by console_setup,
|
|
|
|
* so disable it till the port is used.
|
|
|
|
*/
|
|
|
|
pic32_disable_clock(sport);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, port);
|
|
|
|
|
|
|
|
dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n",
|
|
|
|
__func__, uart_idx);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
err:
|
|
|
|
/* automatic unroll of sport and gpios */
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pic32_uart_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct uart_port *port = platform_get_drvdata(pdev);
|
|
|
|
struct pic32_sport *sport = to_pic32_sport(port);
|
|
|
|
|
|
|
|
uart_remove_one_port(&pic32_uart_driver, port);
|
|
|
|
pic32_disable_clock(sport);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
pic32_sports[sport->idx] = NULL;
|
|
|
|
|
|
|
|
/* automatic unroll of sport and gpios */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id pic32_serial_dt_ids[] = {
|
|
|
|
{ .compatible = "microchip,pic32mzda-uart" },
|
|
|
|
{ /* sentinel */ }
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids);
|
|
|
|
|
|
|
|
static struct platform_driver pic32_uart_platform_driver = {
|
|
|
|
.probe = pic32_uart_probe,
|
|
|
|
.remove = pic32_uart_remove,
|
|
|
|
.driver = {
|
|
|
|
.name = PIC32_DEV_NAME,
|
|
|
|
.of_match_table = of_match_ptr(pic32_serial_dt_ids),
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init pic32_uart_init(void)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = uart_register_driver(&pic32_uart_driver);
|
|
|
|
if (ret) {
|
|
|
|
pr_err("failed to register %s:%d\n",
|
|
|
|
pic32_uart_driver.driver_name, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = platform_driver_register(&pic32_uart_platform_driver);
|
|
|
|
if (ret) {
|
|
|
|
pr_err("fail to register pic32 uart\n");
|
|
|
|
uart_unregister_driver(&pic32_uart_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
arch_initcall(pic32_uart_init);
|
|
|
|
|
|
|
|
static void __exit pic32_uart_exit(void)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_SERIAL_PIC32_CONSOLE
|
|
|
|
unregister_console(&pic32_console);
|
|
|
|
#endif
|
|
|
|
platform_driver_unregister(&pic32_uart_platform_driver);
|
|
|
|
uart_unregister_driver(&pic32_uart_driver);
|
|
|
|
}
|
|
|
|
module_exit(pic32_uart_exit);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>");
|
|
|
|
MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|