linux/fs/ext4/indirect.c

1464 lines
43 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/ext4/indirect.c
*
* from
*
* linux/fs/ext4/inode.c
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/fs/minix/inode.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Goal-directed block allocation by Stephen Tweedie
* (sct@redhat.com), 1993, 1998
*/
#include "ext4_jbd2.h"
#include "truncate.h"
#include <linux/dax.h>
#include <linux/uio.h>
#include <trace/events/ext4.h>
typedef struct {
__le32 *p;
__le32 key;
struct buffer_head *bh;
} Indirect;
static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v)
{
p->key = *(p->p = v);
p->bh = bh;
}
/**
* ext4_block_to_path - parse the block number into array of offsets
* @inode: inode in question (we are only interested in its superblock)
* @i_block: block number to be parsed
* @offsets: array to store the offsets in
* @boundary: set this non-zero if the referred-to block is likely to be
* followed (on disk) by an indirect block.
*
* To store the locations of file's data ext4 uses a data structure common
* for UNIX filesystems - tree of pointers anchored in the inode, with
* data blocks at leaves and indirect blocks in intermediate nodes.
* This function translates the block number into path in that tree -
* return value is the path length and @offsets[n] is the offset of
* pointer to (n+1)th node in the nth one. If @block is out of range
* (negative or too large) warning is printed and zero returned.
*
* Note: function doesn't find node addresses, so no IO is needed. All
* we need to know is the capacity of indirect blocks (taken from the
* inode->i_sb).
*/
/*
* Portability note: the last comparison (check that we fit into triple
* indirect block) is spelled differently, because otherwise on an
* architecture with 32-bit longs and 8Kb pages we might get into trouble
* if our filesystem had 8Kb blocks. We might use long long, but that would
* kill us on x86. Oh, well, at least the sign propagation does not matter -
* i_block would have to be negative in the very beginning, so we would not
* get there at all.
*/
static int ext4_block_to_path(struct inode *inode,
ext4_lblk_t i_block,
ext4_lblk_t offsets[4], int *boundary)
{
int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb);
int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb);
const long direct_blocks = EXT4_NDIR_BLOCKS,
indirect_blocks = ptrs,
double_blocks = (1 << (ptrs_bits * 2));
int n = 0;
int final = 0;
if (i_block < direct_blocks) {
offsets[n++] = i_block;
final = direct_blocks;
} else if ((i_block -= direct_blocks) < indirect_blocks) {
offsets[n++] = EXT4_IND_BLOCK;
offsets[n++] = i_block;
final = ptrs;
} else if ((i_block -= indirect_blocks) < double_blocks) {
offsets[n++] = EXT4_DIND_BLOCK;
offsets[n++] = i_block >> ptrs_bits;
offsets[n++] = i_block & (ptrs - 1);
final = ptrs;
} else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) {
offsets[n++] = EXT4_TIND_BLOCK;
offsets[n++] = i_block >> (ptrs_bits * 2);
offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1);
offsets[n++] = i_block & (ptrs - 1);
final = ptrs;
} else {
ext4_warning(inode->i_sb, "block %lu > max in inode %lu",
i_block + direct_blocks +
indirect_blocks + double_blocks, inode->i_ino);
}
if (boundary)
*boundary = final - 1 - (i_block & (ptrs - 1));
return n;
}
/**
* ext4_get_branch - read the chain of indirect blocks leading to data
* @inode: inode in question
* @depth: depth of the chain (1 - direct pointer, etc.)
* @offsets: offsets of pointers in inode/indirect blocks
* @chain: place to store the result
* @err: here we store the error value
*
* Function fills the array of triples <key, p, bh> and returns %NULL
* if everything went OK or the pointer to the last filled triple
* (incomplete one) otherwise. Upon the return chain[i].key contains
* the number of (i+1)-th block in the chain (as it is stored in memory,
* i.e. little-endian 32-bit), chain[i].p contains the address of that
* number (it points into struct inode for i==0 and into the bh->b_data
* for i>0) and chain[i].bh points to the buffer_head of i-th indirect
* block for i>0 and NULL for i==0. In other words, it holds the block
* numbers of the chain, addresses they were taken from (and where we can
* verify that chain did not change) and buffer_heads hosting these
* numbers.
*
* Function stops when it stumbles upon zero pointer (absent block)
* (pointer to last triple returned, *@err == 0)
* or when it gets an IO error reading an indirect block
* (ditto, *@err == -EIO)
* or when it reads all @depth-1 indirect blocks successfully and finds
* the whole chain, all way to the data (returns %NULL, *err == 0).
*
* Need to be called with
* down_read(&EXT4_I(inode)->i_data_sem)
*/
static Indirect *ext4_get_branch(struct inode *inode, int depth,
ext4_lblk_t *offsets,
Indirect chain[4], int *err)
{
struct super_block *sb = inode->i_sb;
Indirect *p = chain;
struct buffer_head *bh;
int ret = -EIO;
*err = 0;
/* i_data is not going away, no lock needed */
add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets);
if (!p->key)
goto no_block;
while (--depth) {
bh = sb_getblk(sb, le32_to_cpu(p->key));
if (unlikely(!bh)) {
ret = -ENOMEM;
goto failure;
}
if (!bh_uptodate_or_lock(bh)) {
if (bh_submit_read(bh) < 0) {
put_bh(bh);
goto failure;
}
/* validate block references */
if (ext4_check_indirect_blockref(inode, bh)) {
put_bh(bh);
goto failure;
}
}
add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets);
/* Reader: end */
if (!p->key)
goto no_block;
}
return NULL;
failure:
*err = ret;
no_block:
return p;
}
/**
* ext4_find_near - find a place for allocation with sufficient locality
* @inode: owner
* @ind: descriptor of indirect block.
*
* This function returns the preferred place for block allocation.
* It is used when heuristic for sequential allocation fails.
* Rules are:
* + if there is a block to the left of our position - allocate near it.
* + if pointer will live in indirect block - allocate near that block.
* + if pointer will live in inode - allocate in the same
* cylinder group.
*
* In the latter case we colour the starting block by the callers PID to
* prevent it from clashing with concurrent allocations for a different inode
* in the same block group. The PID is used here so that functionally related
* files will be close-by on-disk.
*
* Caller must make sure that @ind is valid and will stay that way.
*/
static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind)
{
struct ext4_inode_info *ei = EXT4_I(inode);
__le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data;
__le32 *p;
/* Try to find previous block */
for (p = ind->p - 1; p >= start; p--) {
if (*p)
return le32_to_cpu(*p);
}
/* No such thing, so let's try location of indirect block */
if (ind->bh)
return ind->bh->b_blocknr;
/*
* It is going to be referred to from the inode itself? OK, just put it
* into the same cylinder group then.
*/
return ext4_inode_to_goal_block(inode);
}
/**
* ext4_find_goal - find a preferred place for allocation.
* @inode: owner
* @block: block we want
* @partial: pointer to the last triple within a chain
*
* Normally this function find the preferred place for block allocation,
* returns it.
* Because this is only used for non-extent files, we limit the block nr
* to 32 bits.
*/
static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block,
Indirect *partial)
{
ext4_fsblk_t goal;
/*
* XXX need to get goal block from mballoc's data structures
*/
goal = ext4_find_near(inode, partial);
goal = goal & EXT4_MAX_BLOCK_FILE_PHYS;
return goal;
}
/**
* ext4_blks_to_allocate - Look up the block map and count the number
* of direct blocks need to be allocated for the given branch.
*
* @branch: chain of indirect blocks
* @k: number of blocks need for indirect blocks
* @blks: number of data blocks to be mapped.
* @blocks_to_boundary: the offset in the indirect block
*
* return the total number of blocks to be allocate, including the
* direct and indirect blocks.
*/
static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks,
int blocks_to_boundary)
{
unsigned int count = 0;
/*
* Simple case, [t,d]Indirect block(s) has not allocated yet
* then it's clear blocks on that path have not allocated
*/
if (k > 0) {
/* right now we don't handle cross boundary allocation */
if (blks < blocks_to_boundary + 1)
count += blks;
else
count += blocks_to_boundary + 1;
return count;
}
count++;
while (count < blks && count <= blocks_to_boundary &&
le32_to_cpu(*(branch[0].p + count)) == 0) {
count++;
}
return count;
}
/**
* ext4_alloc_branch - allocate and set up a chain of blocks.
* @handle: handle for this transaction
* @inode: owner
* @indirect_blks: number of allocated indirect blocks
* @blks: number of allocated direct blocks
* @goal: preferred place for allocation
* @offsets: offsets (in the blocks) to store the pointers to next.
* @branch: place to store the chain in.
*
* This function allocates blocks, zeroes out all but the last one,
* links them into chain and (if we are synchronous) writes them to disk.
* In other words, it prepares a branch that can be spliced onto the
* inode. It stores the information about that chain in the branch[], in
* the same format as ext4_get_branch() would do. We are calling it after
* we had read the existing part of chain and partial points to the last
* triple of that (one with zero ->key). Upon the exit we have the same
* picture as after the successful ext4_get_block(), except that in one
* place chain is disconnected - *branch->p is still zero (we did not
* set the last link), but branch->key contains the number that should
* be placed into *branch->p to fill that gap.
*
* If allocation fails we free all blocks we've allocated (and forget
* their buffer_heads) and return the error value the from failed
* ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain
* as described above and return 0.
*/
static int ext4_alloc_branch(handle_t *handle,
struct ext4_allocation_request *ar,
int indirect_blks, ext4_lblk_t *offsets,
Indirect *branch)
{
struct buffer_head * bh;
ext4_fsblk_t b, new_blocks[4];
__le32 *p;
int i, j, err, len = 1;
for (i = 0; i <= indirect_blks; i++) {
if (i == indirect_blks) {
new_blocks[i] = ext4_mb_new_blocks(handle, ar, &err);
} else
ar->goal = new_blocks[i] = ext4_new_meta_blocks(handle,
ar->inode, ar->goal,
ar->flags & EXT4_MB_DELALLOC_RESERVED,
NULL, &err);
if (err) {
i--;
goto failed;
}
branch[i].key = cpu_to_le32(new_blocks[i]);
if (i == 0)
continue;
bh = branch[i].bh = sb_getblk(ar->inode->i_sb, new_blocks[i-1]);
if (unlikely(!bh)) {
err = -ENOMEM;
goto failed;
}
lock_buffer(bh);
BUFFER_TRACE(bh, "call get_create_access");
err = ext4_journal_get_create_access(handle, bh);
if (err) {
unlock_buffer(bh);
goto failed;
}
memset(bh->b_data, 0, bh->b_size);
p = branch[i].p = (__le32 *) bh->b_data + offsets[i];
b = new_blocks[i];
if (i == indirect_blks)
len = ar->len;
for (j = 0; j < len; j++)
*p++ = cpu_to_le32(b++);
BUFFER_TRACE(bh, "marking uptodate");
set_buffer_uptodate(bh);
unlock_buffer(bh);
BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
err = ext4_handle_dirty_metadata(handle, ar->inode, bh);
if (err)
goto failed;
}
return 0;
failed:
for (; i >= 0; i--) {
/*
* We want to ext4_forget() only freshly allocated indirect
* blocks. Buffer for new_blocks[i-1] is at branch[i].bh and
* buffer at branch[0].bh is indirect block / inode already
* existing before ext4_alloc_branch() was called.
*/
if (i > 0 && i != indirect_blks && branch[i].bh)
ext4_forget(handle, 1, ar->inode, branch[i].bh,
branch[i].bh->b_blocknr);
ext4_free_blocks(handle, ar->inode, NULL, new_blocks[i],
(i == indirect_blks) ? ar->len : 1, 0);
}
return err;
}
/**
* ext4_splice_branch - splice the allocated branch onto inode.
* @handle: handle for this transaction
* @inode: owner
* @block: (logical) number of block we are adding
* @chain: chain of indirect blocks (with a missing link - see
* ext4_alloc_branch)
* @where: location of missing link
* @num: number of indirect blocks we are adding
* @blks: number of direct blocks we are adding
*
* This function fills the missing link and does all housekeeping needed in
* inode (->i_blocks, etc.). In case of success we end up with the full
* chain to new block and return 0.
*/
static int ext4_splice_branch(handle_t *handle,
struct ext4_allocation_request *ar,
Indirect *where, int num)
{
int i;
int err = 0;
ext4_fsblk_t current_block;
/*
* If we're splicing into a [td]indirect block (as opposed to the
* inode) then we need to get write access to the [td]indirect block
* before the splice.
*/
if (where->bh) {
BUFFER_TRACE(where->bh, "get_write_access");
err = ext4_journal_get_write_access(handle, where->bh);
if (err)
goto err_out;
}
/* That's it */
*where->p = where->key;
/*
* Update the host buffer_head or inode to point to more just allocated
* direct blocks blocks
*/
if (num == 0 && ar->len > 1) {
current_block = le32_to_cpu(where->key) + 1;
for (i = 1; i < ar->len; i++)
*(where->p + i) = cpu_to_le32(current_block++);
}
/* We are done with atomic stuff, now do the rest of housekeeping */
/* had we spliced it onto indirect block? */
if (where->bh) {
/*
* If we spliced it onto an indirect block, we haven't
* altered the inode. Note however that if it is being spliced
* onto an indirect block at the very end of the file (the
* file is growing) then we *will* alter the inode to reflect
* the new i_size. But that is not done here - it is done in
* generic_commit_write->__mark_inode_dirty->ext4_dirty_inode.
*/
jbd_debug(5, "splicing indirect only\n");
BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata");
err = ext4_handle_dirty_metadata(handle, ar->inode, where->bh);
if (err)
goto err_out;
} else {
/*
* OK, we spliced it into the inode itself on a direct block.
*/
ext4_mark_inode_dirty(handle, ar->inode);
jbd_debug(5, "splicing direct\n");
}
return err;
err_out:
for (i = 1; i <= num; i++) {
/*
* branch[i].bh is newly allocated, so there is no
* need to revoke the block, which is why we don't
* need to set EXT4_FREE_BLOCKS_METADATA.
*/
ext4_free_blocks(handle, ar->inode, where[i].bh, 0, 1,
EXT4_FREE_BLOCKS_FORGET);
}
ext4_free_blocks(handle, ar->inode, NULL, le32_to_cpu(where[num].key),
ar->len, 0);
return err;
}
/*
* The ext4_ind_map_blocks() function handles non-extents inodes
* (i.e., using the traditional indirect/double-indirect i_blocks
* scheme) for ext4_map_blocks().
*
* Allocation strategy is simple: if we have to allocate something, we will
* have to go the whole way to leaf. So let's do it before attaching anything
* to tree, set linkage between the newborn blocks, write them if sync is
* required, recheck the path, free and repeat if check fails, otherwise
* set the last missing link (that will protect us from any truncate-generated
* removals - all blocks on the path are immune now) and possibly force the
* write on the parent block.
* That has a nice additional property: no special recovery from the failed
* allocations is needed - we simply release blocks and do not touch anything
* reachable from inode.
*
* `handle' can be NULL if create == 0.
*
* return > 0, # of blocks mapped or allocated.
* return = 0, if plain lookup failed.
* return < 0, error case.
*
* The ext4_ind_get_blocks() function should be called with
* down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem
* blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or
* down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system
* blocks.
*/
int ext4_ind_map_blocks(handle_t *handle, struct inode *inode,
struct ext4_map_blocks *map,
int flags)
{
struct ext4_allocation_request ar;
int err = -EIO;
ext4_lblk_t offsets[4];
Indirect chain[4];
Indirect *partial;
int indirect_blks;
int blocks_to_boundary = 0;
int depth;
int count = 0;
ext4_fsblk_t first_block = 0;
trace_ext4_ind_map_blocks_enter(inode, map->m_lblk, map->m_len, flags);
J_ASSERT(!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)));
J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0);
depth = ext4_block_to_path(inode, map->m_lblk, offsets,
&blocks_to_boundary);
if (depth == 0)
goto out;
partial = ext4_get_branch(inode, depth, offsets, chain, &err);
/* Simplest case - block found, no allocation needed */
if (!partial) {
first_block = le32_to_cpu(chain[depth - 1].key);
count++;
/*map more blocks*/
while (count < map->m_len && count <= blocks_to_boundary) {
ext4_fsblk_t blk;
blk = le32_to_cpu(*(chain[depth-1].p + count));
if (blk == first_block + count)
count++;
else
break;
}
goto got_it;
}
/* Next simple case - plain lookup failed */
if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
unsigned epb = inode->i_sb->s_blocksize / sizeof(u32);
int i;
/*
* Count number blocks in a subtree under 'partial'. At each
* level we count number of complete empty subtrees beyond
* current offset and then descend into the subtree only
* partially beyond current offset.
*/
count = 0;
for (i = partial - chain + 1; i < depth; i++)
count = count * epb + (epb - offsets[i] - 1);
count++;
/* Fill in size of a hole we found */
map->m_pblk = 0;
map->m_len = min_t(unsigned int, map->m_len, count);
goto cleanup;
}
/* Failed read of indirect block */
if (err == -EIO)
goto cleanup;
/*
* Okay, we need to do block allocation.
*/
if (ext4_has_feature_bigalloc(inode->i_sb)) {
EXT4_ERROR_INODE(inode, "Can't allocate blocks for "
"non-extent mapped inodes with bigalloc");
return -EFSCORRUPTED;
}
/* Set up for the direct block allocation */
memset(&ar, 0, sizeof(ar));
ar.inode = inode;
ar.logical = map->m_lblk;
if (S_ISREG(inode->i_mode))
ar.flags = EXT4_MB_HINT_DATA;
if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
ar.flags |= EXT4_MB_DELALLOC_RESERVED;
if (flags & EXT4_GET_BLOCKS_METADATA_NOFAIL)
ar.flags |= EXT4_MB_USE_RESERVED;
ar.goal = ext4_find_goal(inode, map->m_lblk, partial);
/* the number of blocks need to allocate for [d,t]indirect blocks */
indirect_blks = (chain + depth) - partial - 1;
/*
* Next look up the indirect map to count the totoal number of
* direct blocks to allocate for this branch.
*/
ar.len = ext4_blks_to_allocate(partial, indirect_blks,
map->m_len, blocks_to_boundary);
/*
* Block out ext4_truncate while we alter the tree
*/
err = ext4_alloc_branch(handle, &ar, indirect_blks,
offsets + (partial - chain), partial);
/*
* The ext4_splice_branch call will free and forget any buffers
* on the new chain if there is a failure, but that risks using
* up transaction credits, especially for bitmaps where the
* credits cannot be returned. Can we handle this somehow? We
* may need to return -EAGAIN upwards in the worst case. --sct
*/
if (!err)
err = ext4_splice_branch(handle, &ar, partial, indirect_blks);
if (err)
goto cleanup;
map->m_flags |= EXT4_MAP_NEW;
ext4_update_inode_fsync_trans(handle, inode, 1);
count = ar.len;
got_it:
map->m_flags |= EXT4_MAP_MAPPED;
map->m_pblk = le32_to_cpu(chain[depth-1].key);
map->m_len = count;
if (count > blocks_to_boundary)
map->m_flags |= EXT4_MAP_BOUNDARY;
err = count;
/* Clean up and exit */
partial = chain + depth - 1; /* the whole chain */
cleanup:
while (partial > chain) {
BUFFER_TRACE(partial->bh, "call brelse");
brelse(partial->bh);
partial--;
}
out:
trace_ext4_ind_map_blocks_exit(inode, flags, map, err);
return err;
}
/*
* Calculate the number of metadata blocks need to reserve
* to allocate a new block at @lblocks for non extent file based file
*/
int ext4_ind_calc_metadata_amount(struct inode *inode, sector_t lblock)
{
struct ext4_inode_info *ei = EXT4_I(inode);
sector_t dind_mask = ~((sector_t)EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1);
int blk_bits;
if (lblock < EXT4_NDIR_BLOCKS)
return 0;
lblock -= EXT4_NDIR_BLOCKS;
if (ei->i_da_metadata_calc_len &&
(lblock & dind_mask) == ei->i_da_metadata_calc_last_lblock) {
ei->i_da_metadata_calc_len++;
return 0;
}
ei->i_da_metadata_calc_last_lblock = lblock & dind_mask;
ei->i_da_metadata_calc_len = 1;
blk_bits = order_base_2(lblock);
return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1;
}
/*
* Calculate number of indirect blocks touched by mapping @nrblocks logically
* contiguous blocks
*/
int ext4_ind_trans_blocks(struct inode *inode, int nrblocks)
{
/*
* With N contiguous data blocks, we need at most
* N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks,
* 2 dindirect blocks, and 1 tindirect block
*/
return DIV_ROUND_UP(nrblocks, EXT4_ADDR_PER_BLOCK(inode->i_sb)) + 4;
}
/*
* Truncate transactions can be complex and absolutely huge. So we need to
* be able to restart the transaction at a conventient checkpoint to make
* sure we don't overflow the journal.
*
* Try to extend this transaction for the purposes of truncation. If
* extend fails, we need to propagate the failure up and restart the
* transaction in the top-level truncate loop. --sct
*
* Returns 0 if we managed to create more room. If we can't create more
* room, and the transaction must be restarted we return 1.
*/
static int try_to_extend_transaction(handle_t *handle, struct inode *inode)
{
if (!ext4_handle_valid(handle))
return 0;
if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1))
return 0;
if (!ext4_journal_extend(handle, ext4_blocks_for_truncate(inode)))
return 0;
return 1;
}
/*
* Probably it should be a library function... search for first non-zero word
* or memcmp with zero_page, whatever is better for particular architecture.
* Linus?
*/
static inline int all_zeroes(__le32 *p, __le32 *q)
{
while (p < q)
if (*p++)
return 0;
return 1;
}
/**
* ext4_find_shared - find the indirect blocks for partial truncation.
* @inode: inode in question
* @depth: depth of the affected branch
* @offsets: offsets of pointers in that branch (see ext4_block_to_path)
* @chain: place to store the pointers to partial indirect blocks
* @top: place to the (detached) top of branch
*
* This is a helper function used by ext4_truncate().
*
* When we do truncate() we may have to clean the ends of several
* indirect blocks but leave the blocks themselves alive. Block is
* partially truncated if some data below the new i_size is referred
* from it (and it is on the path to the first completely truncated
* data block, indeed). We have to free the top of that path along
* with everything to the right of the path. Since no allocation
* past the truncation point is possible until ext4_truncate()
* finishes, we may safely do the latter, but top of branch may
* require special attention - pageout below the truncation point
* might try to populate it.
*
* We atomically detach the top of branch from the tree, store the
* block number of its root in *@top, pointers to buffer_heads of
* partially truncated blocks - in @chain[].bh and pointers to
* their last elements that should not be removed - in
* @chain[].p. Return value is the pointer to last filled element
* of @chain.
*
* The work left to caller to do the actual freeing of subtrees:
* a) free the subtree starting from *@top
* b) free the subtrees whose roots are stored in
* (@chain[i].p+1 .. end of @chain[i].bh->b_data)
* c) free the subtrees growing from the inode past the @chain[0].
* (no partially truncated stuff there). */
static Indirect *ext4_find_shared(struct inode *inode, int depth,
ext4_lblk_t offsets[4], Indirect chain[4],
__le32 *top)
{
Indirect *partial, *p;
int k, err;
*top = 0;
/* Make k index the deepest non-null offset + 1 */
for (k = depth; k > 1 && !offsets[k-1]; k--)
;
partial = ext4_get_branch(inode, k, offsets, chain, &err);
/* Writer: pointers */
if (!partial)
partial = chain + k-1;
/*
* If the branch acquired continuation since we've looked at it -
* fine, it should all survive and (new) top doesn't belong to us.
*/
if (!partial->key && *partial->p)
/* Writer: end */
goto no_top;
for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--)
;
/*
* OK, we've found the last block that must survive. The rest of our
* branch should be detached before unlocking. However, if that rest
* of branch is all ours and does not grow immediately from the inode
* it's easier to cheat and just decrement partial->p.
*/
if (p == chain + k - 1 && p > chain) {
p->p--;
} else {
*top = *p->p;
/* Nope, don't do this in ext4. Must leave the tree intact */
#if 0
*p->p = 0;
#endif
}
/* Writer: end */
while (partial > p) {
brelse(partial->bh);
partial--;
}
no_top:
return partial;
}
/*
* Zero a number of block pointers in either an inode or an indirect block.
* If we restart the transaction we must again get write access to the
* indirect block for further modification.
*
* We release `count' blocks on disk, but (last - first) may be greater
* than `count' because there can be holes in there.
*
* Return 0 on success, 1 on invalid block range
* and < 0 on fatal error.
*/
static int ext4_clear_blocks(handle_t *handle, struct inode *inode,
struct buffer_head *bh,
ext4_fsblk_t block_to_free,
unsigned long count, __le32 *first,
__le32 *last)
{
__le32 *p;
int flags = EXT4_FREE_BLOCKS_VALIDATED;
int err;
if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode) ||
ext4_test_inode_flag(inode, EXT4_INODE_EA_INODE))
flags |= EXT4_FREE_BLOCKS_FORGET | EXT4_FREE_BLOCKS_METADATA;
else if (ext4_should_journal_data(inode))
flags |= EXT4_FREE_BLOCKS_FORGET;
if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free,
count)) {
EXT4_ERROR_INODE(inode, "attempt to clear invalid "
"blocks %llu len %lu",
(unsigned long long) block_to_free, count);
return 1;
}
if (try_to_extend_transaction(handle, inode)) {
if (bh) {
BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
err = ext4_handle_dirty_metadata(handle, inode, bh);
if (unlikely(err))
goto out_err;
}
err = ext4_mark_inode_dirty(handle, inode);
if (unlikely(err))
goto out_err;
err = ext4_truncate_restart_trans(handle, inode,
ext4_blocks_for_truncate(inode));
if (unlikely(err))
goto out_err;
if (bh) {
BUFFER_TRACE(bh, "retaking write access");
err = ext4_journal_get_write_access(handle, bh);
if (unlikely(err))
goto out_err;
}
}
for (p = first; p < last; p++)
*p = 0;
ext4_free_blocks(handle, inode, NULL, block_to_free, count, flags);
return 0;
out_err:
ext4_std_error(inode->i_sb, err);
return err;
}
/**
* ext4_free_data - free a list of data blocks
* @handle: handle for this transaction
* @inode: inode we are dealing with
* @this_bh: indirect buffer_head which contains *@first and *@last
* @first: array of block numbers
* @last: points immediately past the end of array
*
* We are freeing all blocks referred from that array (numbers are stored as
* little-endian 32-bit) and updating @inode->i_blocks appropriately.
*
* We accumulate contiguous runs of blocks to free. Conveniently, if these
* blocks are contiguous then releasing them at one time will only affect one
* or two bitmap blocks (+ group descriptor(s) and superblock) and we won't
* actually use a lot of journal space.
*
* @this_bh will be %NULL if @first and @last point into the inode's direct
* block pointers.
*/
static void ext4_free_data(handle_t *handle, struct inode *inode,
struct buffer_head *this_bh,
__le32 *first, __le32 *last)
{
ext4_fsblk_t block_to_free = 0; /* Starting block # of a run */
unsigned long count = 0; /* Number of blocks in the run */
__le32 *block_to_free_p = NULL; /* Pointer into inode/ind
corresponding to
block_to_free */
ext4_fsblk_t nr; /* Current block # */
__le32 *p; /* Pointer into inode/ind
for current block */
int err = 0;
if (this_bh) { /* For indirect block */
BUFFER_TRACE(this_bh, "get_write_access");
err = ext4_journal_get_write_access(handle, this_bh);
/* Important: if we can't update the indirect pointers
* to the blocks, we can't free them. */
if (err)
return;
}
for (p = first; p < last; p++) {
nr = le32_to_cpu(*p);
if (nr) {
/* accumulate blocks to free if they're contiguous */
if (count == 0) {
block_to_free = nr;
block_to_free_p = p;
count = 1;
} else if (nr == block_to_free + count) {
count++;
} else {
err = ext4_clear_blocks(handle, inode, this_bh,
block_to_free, count,
block_to_free_p, p);
if (err)
break;
block_to_free = nr;
block_to_free_p = p;
count = 1;
}
}
}
if (!err && count > 0)
err = ext4_clear_blocks(handle, inode, this_bh, block_to_free,
count, block_to_free_p, p);
if (err < 0)
/* fatal error */
return;
if (this_bh) {
BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata");
/*
* The buffer head should have an attached journal head at this
* point. However, if the data is corrupted and an indirect
* block pointed to itself, it would have been detached when
* the block was cleared. Check for this instead of OOPSing.
*/
if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh))
ext4_handle_dirty_metadata(handle, inode, this_bh);
else
EXT4_ERROR_INODE(inode,
"circular indirect block detected at "
"block %llu",
(unsigned long long) this_bh->b_blocknr);
}
}
/**
* ext4_free_branches - free an array of branches
* @handle: JBD handle for this transaction
* @inode: inode we are dealing with
* @parent_bh: the buffer_head which contains *@first and *@last
* @first: array of block numbers
* @last: pointer immediately past the end of array
* @depth: depth of the branches to free
*
* We are freeing all blocks referred from these branches (numbers are
* stored as little-endian 32-bit) and updating @inode->i_blocks
* appropriately.
*/
static void ext4_free_branches(handle_t *handle, struct inode *inode,
struct buffer_head *parent_bh,
__le32 *first, __le32 *last, int depth)
{
ext4_fsblk_t nr;
__le32 *p;
if (ext4_handle_is_aborted(handle))
return;
if (depth--) {
struct buffer_head *bh;
int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb);
p = last;
while (--p >= first) {
nr = le32_to_cpu(*p);
if (!nr)
continue; /* A hole */
if (!ext4_data_block_valid(EXT4_SB(inode->i_sb),
nr, 1)) {
EXT4_ERROR_INODE(inode,
"invalid indirect mapped "
"block %lu (level %d)",
(unsigned long) nr, depth);
break;
}
/* Go read the buffer for the next level down */
bh = sb_bread(inode->i_sb, nr);
/*
* A read failure? Report error and clear slot
* (should be rare).
*/
if (!bh) {
EXT4_ERROR_INODE_BLOCK(inode, nr,
"Read failure");
continue;
}
/* This zaps the entire block. Bottom up. */
BUFFER_TRACE(bh, "free child branches");
ext4_free_branches(handle, inode, bh,
(__le32 *) bh->b_data,
(__le32 *) bh->b_data + addr_per_block,
depth);
brelse(bh);
/*
* Everything below this this pointer has been
* released. Now let this top-of-subtree go.
*
* We want the freeing of this indirect block to be
* atomic in the journal with the updating of the
* bitmap block which owns it. So make some room in
* the journal.
*
* We zero the parent pointer *after* freeing its
* pointee in the bitmaps, so if extend_transaction()
* for some reason fails to put the bitmap changes and
* the release into the same transaction, recovery
* will merely complain about releasing a free block,
* rather than leaking blocks.
*/
if (ext4_handle_is_aborted(handle))
return;
if (try_to_extend_transaction(handle, inode)) {
ext4_mark_inode_dirty(handle, inode);
ext4_truncate_restart_trans(handle, inode,
ext4_blocks_for_truncate(inode));
}
/*
* The forget flag here is critical because if
* we are journaling (and not doing data
* journaling), we have to make sure a revoke
* record is written to prevent the journal
* replay from overwriting the (former)
* indirect block if it gets reallocated as a
* data block. This must happen in the same
* transaction where the data blocks are
* actually freed.
*/
ext4_free_blocks(handle, inode, NULL, nr, 1,
EXT4_FREE_BLOCKS_METADATA|
EXT4_FREE_BLOCKS_FORGET);
if (parent_bh) {
/*
* The block which we have just freed is
* pointed to by an indirect block: journal it
*/
BUFFER_TRACE(parent_bh, "get_write_access");
if (!ext4_journal_get_write_access(handle,
parent_bh)){
*p = 0;
BUFFER_TRACE(parent_bh,
"call ext4_handle_dirty_metadata");
ext4_handle_dirty_metadata(handle,
inode,
parent_bh);
}
}
}
} else {
/* We have reached the bottom of the tree. */
BUFFER_TRACE(parent_bh, "free data blocks");
ext4_free_data(handle, inode, parent_bh, first, last);
}
}
void ext4_ind_truncate(handle_t *handle, struct inode *inode)
{
struct ext4_inode_info *ei = EXT4_I(inode);
__le32 *i_data = ei->i_data;
int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb);
ext4_lblk_t offsets[4];
Indirect chain[4];
Indirect *partial;
__le32 nr = 0;
int n = 0;
ext4_lblk_t last_block, max_block;
unsigned blocksize = inode->i_sb->s_blocksize;
last_block = (inode->i_size + blocksize-1)
>> EXT4_BLOCK_SIZE_BITS(inode->i_sb);
max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1)
>> EXT4_BLOCK_SIZE_BITS(inode->i_sb);
if (last_block != max_block) {
n = ext4_block_to_path(inode, last_block, offsets, NULL);
if (n == 0)
return;
}
ext4_es_remove_extent(inode, last_block, EXT_MAX_BLOCKS - last_block);
/*
* The orphan list entry will now protect us from any crash which
* occurs before the truncate completes, so it is now safe to propagate
* the new, shorter inode size (held for now in i_size) into the
* on-disk inode. We do this via i_disksize, which is the value which
* ext4 *really* writes onto the disk inode.
*/
ei->i_disksize = inode->i_size;
if (last_block == max_block) {
/*
* It is unnecessary to free any data blocks if last_block is
* equal to the indirect block limit.
*/
return;
} else if (n == 1) { /* direct blocks */
ext4_free_data(handle, inode, NULL, i_data+offsets[0],
i_data + EXT4_NDIR_BLOCKS);
goto do_indirects;
}
partial = ext4_find_shared(inode, n, offsets, chain, &nr);
/* Kill the top of shared branch (not detached) */
if (nr) {
if (partial == chain) {
/* Shared branch grows from the inode */
ext4_free_branches(handle, inode, NULL,
&nr, &nr+1, (chain+n-1) - partial);
*partial->p = 0;
/*
* We mark the inode dirty prior to restart,
* and prior to stop. No need for it here.
*/
} else {
/* Shared branch grows from an indirect block */
BUFFER_TRACE(partial->bh, "get_write_access");
ext4_free_branches(handle, inode, partial->bh,
partial->p,
partial->p+1, (chain+n-1) - partial);
}
}
/* Clear the ends of indirect blocks on the shared branch */
while (partial > chain) {
ext4_free_branches(handle, inode, partial->bh, partial->p + 1,
(__le32*)partial->bh->b_data+addr_per_block,
(chain+n-1) - partial);
BUFFER_TRACE(partial->bh, "call brelse");
brelse(partial->bh);
partial--;
}
do_indirects:
/* Kill the remaining (whole) subtrees */
switch (offsets[0]) {
default:
nr = i_data[EXT4_IND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1);
i_data[EXT4_IND_BLOCK] = 0;
}
/* fall through */
case EXT4_IND_BLOCK:
nr = i_data[EXT4_DIND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2);
i_data[EXT4_DIND_BLOCK] = 0;
}
/* fall through */
case EXT4_DIND_BLOCK:
nr = i_data[EXT4_TIND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3);
i_data[EXT4_TIND_BLOCK] = 0;
}
/* fall through */
case EXT4_TIND_BLOCK:
;
}
}
/**
* ext4_ind_remove_space - remove space from the range
* @handle: JBD handle for this transaction
* @inode: inode we are dealing with
* @start: First block to remove
* @end: One block after the last block to remove (exclusive)
*
* Free the blocks in the defined range (end is exclusive endpoint of
* range). This is used by ext4_punch_hole().
*/
int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
ext4_lblk_t start, ext4_lblk_t end)
{
struct ext4_inode_info *ei = EXT4_I(inode);
__le32 *i_data = ei->i_data;
int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb);
ext4_lblk_t offsets[4], offsets2[4];
Indirect chain[4], chain2[4];
Indirect *partial, *partial2;
Indirect *p = NULL, *p2 = NULL;
ext4_lblk_t max_block;
__le32 nr = 0, nr2 = 0;
int n = 0, n2 = 0;
unsigned blocksize = inode->i_sb->s_blocksize;
max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1)
>> EXT4_BLOCK_SIZE_BITS(inode->i_sb);
if (end >= max_block)
end = max_block;
if ((start >= end) || (start > max_block))
return 0;
n = ext4_block_to_path(inode, start, offsets, NULL);
n2 = ext4_block_to_path(inode, end, offsets2, NULL);
BUG_ON(n > n2);
if ((n == 1) && (n == n2)) {
/* We're punching only within direct block range */
ext4_free_data(handle, inode, NULL, i_data + offsets[0],
i_data + offsets2[0]);
return 0;
} else if (n2 > n) {
/*
* Start and end are on a different levels so we're going to
* free partial block at start, and partial block at end of
* the range. If there are some levels in between then
* do_indirects label will take care of that.
*/
if (n == 1) {
/*
* Start is at the direct block level, free
* everything to the end of the level.
*/
ext4_free_data(handle, inode, NULL, i_data + offsets[0],
i_data + EXT4_NDIR_BLOCKS);
goto end_range;
}
partial = p = ext4_find_shared(inode, n, offsets, chain, &nr);
if (nr) {
if (partial == chain) {
/* Shared branch grows from the inode */
ext4_free_branches(handle, inode, NULL,
&nr, &nr+1, (chain+n-1) - partial);
*partial->p = 0;
} else {
/* Shared branch grows from an indirect block */
BUFFER_TRACE(partial->bh, "get_write_access");
ext4_free_branches(handle, inode, partial->bh,
partial->p,
partial->p+1, (chain+n-1) - partial);
}
}
/*
* Clear the ends of indirect blocks on the shared branch
* at the start of the range
*/
while (partial > chain) {
ext4_free_branches(handle, inode, partial->bh,
partial->p + 1,
(__le32 *)partial->bh->b_data+addr_per_block,
(chain+n-1) - partial);
partial--;
}
end_range:
partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
if (nr2) {
if (partial2 == chain2) {
/*
* Remember, end is exclusive so here we're at
* the start of the next level we're not going
* to free. Everything was covered by the start
* of the range.
*/
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
goto do_indirects;
}
} else {
/*
* ext4_find_shared returns Indirect structure which
* points to the last element which should not be
* removed by truncate. But this is end of the range
* in punch_hole so we need to point to the next element
*/
partial2->p++;
}
/*
* Clear the ends of indirect blocks on the shared branch
* at the end of the range
*/
while (partial2 > chain2) {
ext4_free_branches(handle, inode, partial2->bh,
(__le32 *)partial2->bh->b_data,
partial2->p,
(chain2+n2-1) - partial2);
partial2--;
}
goto do_indirects;
}
/* Punch happened within the same level (n == n2) */
partial = p = ext4_find_shared(inode, n, offsets, chain, &nr);
partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
/* Free top, but only if partial2 isn't its subtree. */
if (nr) {
int level = min(partial - chain, partial2 - chain2);
int i;
int subtree = 1;
for (i = 0; i <= level; i++) {
if (offsets[i] != offsets2[i]) {
subtree = 0;
break;
}
}
if (!subtree) {
if (partial == chain) {
/* Shared branch grows from the inode */
ext4_free_branches(handle, inode, NULL,
&nr, &nr+1,
(chain+n-1) - partial);
*partial->p = 0;
} else {
/* Shared branch grows from an indirect block */
BUFFER_TRACE(partial->bh, "get_write_access");
ext4_free_branches(handle, inode, partial->bh,
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
partial->p,
partial->p+1,
(chain+n-1) - partial);
}
}
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
}
if (!nr2) {
/*
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
* ext4_find_shared returns Indirect structure which
* points to the last element which should not be
* removed by truncate. But this is end of the range
* in punch_hole so we need to point to the next element
*/
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
partial2->p++;
}
while (partial > chain || partial2 > chain2) {
int depth = (chain+n-1) - partial;
int depth2 = (chain2+n2-1) - partial2;
if (partial > chain && partial2 > chain2 &&
partial->bh->b_blocknr == partial2->bh->b_blocknr) {
/*
* We've converged on the same block. Clear the range,
* then we're done.
*/
ext4_free_branches(handle, inode, partial->bh,
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
partial->p + 1,
partial2->p,
(chain+n-1) - partial);
goto cleanup;
}
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
/*
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
* The start and end partial branches may not be at the same
* level even though the punch happened within one level. So, we
* give them a chance to arrive at the same level, then walk
* them in step with each other until we converge on the same
* block.
*/
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
if (partial > chain && depth <= depth2) {
ext4_free_branches(handle, inode, partial->bh,
partial->p + 1,
(__le32 *)partial->bh->b_data+addr_per_block,
(chain+n-1) - partial);
partial--;
}
if (partial2 > chain2 && depth2 <= depth) {
ext4_free_branches(handle, inode, partial2->bh,
(__le32 *)partial2->bh->b_data,
partial2->p,
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
(chain2+n2-1) - partial2);
partial2--;
}
}
cleanup:
while (p && p > chain) {
BUFFER_TRACE(p->bh, "call brelse");
brelse(p->bh);
p--;
}
while (p2 && p2 > chain2) {
BUFFER_TRACE(p2->bh, "call brelse");
brelse(p2->bh);
p2--;
}
ext4: fix indirect punch hole corruption Commit 4f579ae7de56 (ext4: fix punch hole on files with indirect mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect mapping. However, there are bugs in several corner cases. This fixes 5 distinct bugs: 1. When there is at least one entire level of indirection between the start and end of the punch range and the end of the punch range is the first block of its level, we can't return early; we have to free the intervening levels. 2. When the end is at a higher level of indirection than the start and ext4_find_shared returns a top branch for the end, we still need to free the rest of the shared branch it returns; we can't decrement partial2. 3. When a punch happens within one level of indirection, we need to converge on an indirect block that contains the start and end. However, because the branches returned from ext4_find_shared do not necessarily start at the same level (e.g., the partial2 chain will be shallower if the last block occurs at the beginning of an indirect group), the walk of the two chains can end up "missing" each other and freeing a bunch of extra blocks in the process. This mismatch can be handled by first making sure that the chains are at the same level, then walking them together until they converge. 4. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the start, we must free it, but only if the end does not occur within that branch. 5. When the punch happens within one level of indirection and ext4_find_shared returns a top branch for the end, then we shouldn't free the block referenced by the end of the returned chain (this mirrors the different levels case). Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-15 01:08:51 +00:00
return 0;
do_indirects:
/* Kill the remaining (whole) subtrees */
switch (offsets[0]) {
default:
if (++n >= n2)
break;
nr = i_data[EXT4_IND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1);
i_data[EXT4_IND_BLOCK] = 0;
}
/* fall through */
case EXT4_IND_BLOCK:
if (++n >= n2)
break;
nr = i_data[EXT4_DIND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2);
i_data[EXT4_DIND_BLOCK] = 0;
}
/* fall through */
case EXT4_DIND_BLOCK:
if (++n >= n2)
break;
nr = i_data[EXT4_TIND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3);
i_data[EXT4_TIND_BLOCK] = 0;
}
/* fall through */
case EXT4_TIND_BLOCK:
;
}
goto cleanup;
}