linux/drivers/scsi/aic94xx/aic94xx_seq.c

1398 lines
46 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
/*
* Aic94xx SAS/SATA driver sequencer interface.
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* Parts of this code adapted from David Chaw's adp94xx_seq.c.
*/
#include <linux/delay.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
#include <linux/pci.h>
#include <linux/module.h>
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
#include <linux/firmware.h>
#include "aic94xx_reg.h"
#include "aic94xx_hwi.h"
#include "aic94xx_seq.h"
#include "aic94xx_dump.h"
/* It takes no more than 0.05 us for an instruction
* to complete. So waiting for 1 us should be more than
* plenty.
*/
#define PAUSE_DELAY 1
#define PAUSE_TRIES 1000
static const struct firmware *sequencer_fw;
static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task,
cseq_idle_loop, lseq_idle_loop;
static const u8 *cseq_code, *lseq_code;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
static u32 cseq_code_size, lseq_code_size;
static u16 first_scb_site_no = 0xFFFF;
static u16 last_scb_site_no;
/* ---------- Pause/Unpause CSEQ/LSEQ ---------- */
/**
* asd_pause_cseq - pause the central sequencer
* @asd_ha: pointer to host adapter structure
*
* Return 0 on success, negative on failure.
*/
static int asd_pause_cseq(struct asd_ha_struct *asd_ha)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
{
int count = PAUSE_TRIES;
u32 arp2ctl;
arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
if (arp2ctl & PAUSED)
return 0;
asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl | EPAUSE);
do {
arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
if (arp2ctl & PAUSED)
return 0;
udelay(PAUSE_DELAY);
} while (--count > 0);
ASD_DPRINTK("couldn't pause CSEQ\n");
return -1;
}
/**
* asd_unpause_cseq - unpause the central sequencer.
* @asd_ha: pointer to host adapter structure.
*
* Return 0 on success, negative on error.
*/
static int asd_unpause_cseq(struct asd_ha_struct *asd_ha)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
{
u32 arp2ctl;
int count = PAUSE_TRIES;
arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
if (!(arp2ctl & PAUSED))
return 0;
asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl & ~EPAUSE);
do {
arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
if (!(arp2ctl & PAUSED))
return 0;
udelay(PAUSE_DELAY);
} while (--count > 0);
ASD_DPRINTK("couldn't unpause the CSEQ\n");
return -1;
}
/**
* asd_seq_pause_lseq - pause a link sequencer
* @asd_ha: pointer to a host adapter structure
* @lseq: link sequencer of interest
*
* Return 0 on success, negative on error.
*/
static int asd_seq_pause_lseq(struct asd_ha_struct *asd_ha, int lseq)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
{
u32 arp2ctl;
int count = PAUSE_TRIES;
arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
if (arp2ctl & PAUSED)
return 0;
asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl | EPAUSE);
do {
arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
if (arp2ctl & PAUSED)
return 0;
udelay(PAUSE_DELAY);
} while (--count > 0);
ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq);
return -1;
}
/**
* asd_pause_lseq - pause the link sequencer(s)
* @asd_ha: pointer to host adapter structure
* @lseq_mask: mask of link sequencers of interest
*
* Return 0 on success, negative on failure.
*/
static int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
{
int lseq;
int err = 0;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
err = asd_seq_pause_lseq(asd_ha, lseq);
if (err)
return err;
}
return err;
}
/**
* asd_seq_unpause_lseq - unpause a link sequencer
* @asd_ha: pointer to host adapter structure
* @lseq: link sequencer of interest
*
* Return 0 on success, negative on error.
*/
static int asd_seq_unpause_lseq(struct asd_ha_struct *asd_ha, int lseq)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
{
u32 arp2ctl;
int count = PAUSE_TRIES;
arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
if (!(arp2ctl & PAUSED))
return 0;
asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl & ~EPAUSE);
do {
arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
if (!(arp2ctl & PAUSED))
return 0;
udelay(PAUSE_DELAY);
} while (--count > 0);
ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq);
return 0;
}
/* ---------- Downloading CSEQ/LSEQ microcode ---------- */
static int asd_verify_cseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
u32 size)
{
u32 addr = CSEQ_RAM_REG_BASE_ADR;
const u32 *prog = (u32 *) _prog;
u32 i;
for (i = 0; i < size; i += 4, prog++, addr += 4) {
u32 val = asd_read_reg_dword(asd_ha, addr);
if (le32_to_cpu(*prog) != val) {
asd_printk("%s: cseq verify failed at %u "
"read:0x%x, wanted:0x%x\n",
pci_name(asd_ha->pcidev),
i, val, le32_to_cpu(*prog));
return -1;
}
}
ASD_DPRINTK("verified %d bytes, passed\n", size);
return 0;
}
/**
* asd_verify_lseq - verify the microcode of a link sequencer
* @asd_ha: pointer to host adapter structure
* @_prog: pointer to the microcode
* @size: size of the microcode in bytes
* @lseq: link sequencer of interest
*
* The link sequencer code is accessed in 4 KB pages, which are selected
* by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register.
* The 10 KB LSEQm instruction code is mapped, page at a time, at
* LmSEQRAM address.
*/
static int asd_verify_lseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
u32 size, int lseq)
{
#define LSEQ_CODEPAGE_SIZE 4096
int pages = (size + LSEQ_CODEPAGE_SIZE - 1) / LSEQ_CODEPAGE_SIZE;
u32 page;
const u32 *prog = (u32 *) _prog;
for (page = 0; page < pages; page++) {
u32 i;
asd_write_reg_dword(asd_ha, LmBISTCTL1(lseq),
page << LmRAMPAGE_LSHIFT);
for (i = 0; size > 0 && i < LSEQ_CODEPAGE_SIZE;
i += 4, prog++, size-=4) {
u32 val = asd_read_reg_dword(asd_ha, LmSEQRAM(lseq)+i);
if (le32_to_cpu(*prog) != val) {
asd_printk("%s: LSEQ%d verify failed "
"page:%d, offs:%d\n",
pci_name(asd_ha->pcidev),
lseq, page, i);
return -1;
}
}
}
ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq,
(int)((u8 *)prog-_prog));
return 0;
}
/**
* asd_verify_seq -- verify CSEQ/LSEQ microcode
* @asd_ha: pointer to host adapter structure
* @prog: pointer to microcode
* @size: size of the microcode
* @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest
*
* Return 0 if microcode is correct, negative on mismatch.
*/
static int asd_verify_seq(struct asd_ha_struct *asd_ha, const u8 *prog,
u32 size, u8 lseq_mask)
{
if (lseq_mask == 0)
return asd_verify_cseq(asd_ha, prog, size);
else {
int lseq, err;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
err = asd_verify_lseq(asd_ha, prog, size, lseq);
if (err)
return err;
}
}
return 0;
}
#define ASD_DMA_MODE_DOWNLOAD
#ifdef ASD_DMA_MODE_DOWNLOAD
/* This is the size of the CSEQ Mapped instruction page */
#define MAX_DMA_OVLY_COUNT ((1U << 14)-1)
static int asd_download_seq(struct asd_ha_struct *asd_ha,
const u8 * const prog, u32 size, u8 lseq_mask)
{
u32 comstaten;
u32 reg;
int page;
const int pages = (size + MAX_DMA_OVLY_COUNT - 1) / MAX_DMA_OVLY_COUNT;
struct asd_dma_tok *token;
int err = 0;
if (size % 4) {
asd_printk("sequencer program not multiple of 4\n");
return -1;
}
asd_pause_cseq(asd_ha);
asd_pause_lseq(asd_ha, 0xFF);
/* save, disable and clear interrupts */
comstaten = asd_read_reg_dword(asd_ha, COMSTATEN);
asd_write_reg_dword(asd_ha, COMSTATEN, 0);
asd_write_reg_dword(asd_ha, COMSTAT, COMSTAT_MASK);
asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
asd_write_reg_dword(asd_ha, CHIMINT, CHIMINT_MASK);
token = asd_alloc_coherent(asd_ha, MAX_DMA_OVLY_COUNT, GFP_KERNEL);
if (!token) {
asd_printk("out of memory for dma SEQ download\n");
err = -ENOMEM;
goto out;
}
ASD_DPRINTK("dma-ing %d bytes\n", size);
for (page = 0; page < pages; page++) {
int i;
u32 left = min(size-page*MAX_DMA_OVLY_COUNT,
(u32)MAX_DMA_OVLY_COUNT);
memcpy(token->vaddr, prog + page*MAX_DMA_OVLY_COUNT, left);
asd_write_reg_addr(asd_ha, OVLYDMAADR, token->dma_handle);
asd_write_reg_dword(asd_ha, OVLYDMACNT, left);
reg = !page ? RESETOVLYDMA : 0;
reg |= (STARTOVLYDMA | OVLYHALTERR);
reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
/* Start DMA. */
asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
for (i = PAUSE_TRIES*100; i > 0; i--) {
u32 dmadone = asd_read_reg_dword(asd_ha, OVLYDMACTL);
if (!(dmadone & OVLYDMAACT))
break;
udelay(PAUSE_DELAY);
}
}
reg = asd_read_reg_dword(asd_ha, COMSTAT);
if (!(reg & OVLYDMADONE) || (reg & OVLYERR)
|| (asd_read_reg_dword(asd_ha, CHIMINT) & DEVEXCEPT_MASK)){
asd_printk("%s: error DMA-ing sequencer code\n",
pci_name(asd_ha->pcidev));
err = -ENODEV;
}
asd_free_coherent(asd_ha, token);
out:
asd_write_reg_dword(asd_ha, COMSTATEN, comstaten);
return err ? : asd_verify_seq(asd_ha, prog, size, lseq_mask);
}
#else /* ASD_DMA_MODE_DOWNLOAD */
static int asd_download_seq(struct asd_ha_struct *asd_ha, const u8 *_prog,
u32 size, u8 lseq_mask)
{
int i;
u32 reg = 0;
const u32 *prog = (u32 *) _prog;
if (size % 4) {
asd_printk("sequencer program not multiple of 4\n");
return -1;
}
asd_pause_cseq(asd_ha);
asd_pause_lseq(asd_ha, 0xFF);
reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
reg |= PIOCMODE;
asd_write_reg_dword(asd_ha, OVLYDMACNT, size);
asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n",
lseq_mask ? "LSEQ" : "CSEQ", lseq_mask ? "s" : "");
for (i = 0; i < size; i += 4, prog++)
asd_write_reg_dword(asd_ha, SPIODATA, *prog);
reg = (reg & ~PIOCMODE) | OVLYHALTERR;
asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
return asd_verify_seq(asd_ha, _prog, size, lseq_mask);
}
#endif /* ASD_DMA_MODE_DOWNLOAD */
/**
* asd_seq_download_seqs - download the sequencer microcode
* @asd_ha: pointer to host adapter structure
*
* Download the central and link sequencer microcode.
*/
static int asd_seq_download_seqs(struct asd_ha_struct *asd_ha)
{
int err;
if (!asd_ha->hw_prof.enabled_phys) {
asd_printk("%s: no enabled phys!\n", pci_name(asd_ha->pcidev));
return -ENODEV;
}
/* Download the CSEQ */
ASD_DPRINTK("downloading CSEQ...\n");
err = asd_download_seq(asd_ha, cseq_code, cseq_code_size, 0);
if (err) {
asd_printk("CSEQ download failed:%d\n", err);
return err;
}
/* Download the Link Sequencers code. All of the Link Sequencers
* microcode can be downloaded at the same time.
*/
ASD_DPRINTK("downloading LSEQs...\n");
err = asd_download_seq(asd_ha, lseq_code, lseq_code_size,
asd_ha->hw_prof.enabled_phys);
if (err) {
/* Try it one at a time */
u8 lseq;
u8 lseq_mask = asd_ha->hw_prof.enabled_phys;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
err = asd_download_seq(asd_ha, lseq_code,
lseq_code_size, 1<<lseq);
if (err)
break;
}
}
if (err)
asd_printk("LSEQs download failed:%d\n", err);
return err;
}
/* ---------- Initializing the chip, chip memory, etc. ---------- */
/**
* asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_cseq_mip(struct asd_ha_struct *asd_ha)
{
/* CSEQ Mode Independent, page 4 setup. */
asd_write_reg_word(asd_ha, CSEQ_Q_EXE_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_EXE_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_DONE_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_DONE_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_SEND_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_SEND_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_COPY_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_COPY_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_REG0, 0);
asd_write_reg_word(asd_ha, CSEQ_REG1, 0);
asd_write_reg_dword(asd_ha, CSEQ_REG2, 0);
asd_write_reg_byte(asd_ha, CSEQ_LINK_CTL_Q_MAP, 0);
{
u8 con = asd_read_reg_byte(asd_ha, CCONEXIST);
u8 val = hweight8(con);
asd_write_reg_byte(asd_ha, CSEQ_MAX_CSEQ_MODE, (val<<4)|val);
}
asd_write_reg_word(asd_ha, CSEQ_FREE_LIST_HACK_COUNT, 0);
/* CSEQ Mode independent, page 5 setup. */
asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE, 0);
asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE+4, 0);
asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT, 0);
asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT+4, 0);
asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_NEED_EST_NEXUS_SCB, 0);
asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_HEAD, 0);
asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_TAIL, 0);
asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_SCB_OFFSET, 0);
/* CSEQ Mode independent, page 6 setup. */
asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR0, 0);
asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR1, 0);
asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_SCBPTR, 0);
asd_write_reg_byte(asd_ha, CSEQ_INT_ROUT_MODE, 0);
asd_write_reg_byte(asd_ha, CSEQ_ISR_SCRATCH_FLAGS, 0);
asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_SINDEX, 0);
asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_DINDEX, 0);
asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_TAIL, 0xFFFF);
/* Calculate the free scb mask. */
{
u16 cmdctx = asd_get_cmdctx_size(asd_ha);
cmdctx = (~((cmdctx/128)-1)) >> 8;
asd_write_reg_byte(asd_ha, CSEQ_FREE_SCB_MASK, (u8)cmdctx);
}
asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_HEAD,
first_scb_site_no);
asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_TAIL,
last_scb_site_no);
asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_TAIL, 0xFFFF);
/* CSEQ Mode independent, page 7 setup. */
asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE, 0);
asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE+4, 0);
asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT, 0);
asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT+4, 0);
asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_NEED_EMPTY_SCB, 0);
asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_HEAD, 0);
asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_TAIL, 0);
asd_write_reg_byte(asd_ha, CSEQ_EMPTY_SCB_OFFSET, 0);
asd_write_reg_word(asd_ha, CSEQ_PRIMITIVE_DATA, 0);
asd_write_reg_dword(asd_ha, CSEQ_TIMEOUT_CONST, 0);
}
/**
* asd_init_cseq_mdp - initialize CSEQ Mode dependent pages
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
{
int i;
int moffs;
moffs = CSEQ_PAGE_SIZE * 2;
/* CSEQ Mode dependent, modes 0-7, page 0 setup. */
for (i = 0; i < 8; i++) {
asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SINDEX, 0);
asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCBPTR, 0);
asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_TAIL, 0xFFFF);
asd_write_reg_byte(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCRPAGE, 0);
}
/* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */
/* CSEQ Mode dependent, mode 8, page 0 setup. */
asd_write_reg_word(asd_ha, CSEQ_RET_ADDR, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_RET_SCBPTR, 0);
asd_write_reg_word(asd_ha, CSEQ_SAVE_SCBPTR, 0);
asd_write_reg_word(asd_ha, CSEQ_EMPTY_TRANS_CTX, 0);
asd_write_reg_word(asd_ha, CSEQ_RESP_LEN, 0);
asd_write_reg_word(asd_ha, CSEQ_TMF_SCBPTR, 0);
asd_write_reg_word(asd_ha, CSEQ_GLOBAL_PREV_SCB, 0);
asd_write_reg_word(asd_ha, CSEQ_GLOBAL_HEAD, 0);
asd_write_reg_word(asd_ha, CSEQ_CLEAR_LU_HEAD, 0);
asd_write_reg_byte(asd_ha, CSEQ_TMF_OPCODE, 0);
asd_write_reg_byte(asd_ha, CSEQ_SCRATCH_FLAGS, 0);
asd_write_reg_word(asd_ha, CSEQ_HSB_SITE, 0);
asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_SCB_SITE,
(u16)last_scb_site_no+1);
asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_DDB_SITE,
(u16)asd_ha->hw_prof.max_ddbs);
/* CSEQ Mode dependent, mode 8, page 1 setup. */
asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR, 0);
asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR + 4, 0);
asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK, 0);
asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK + 4, 0);
/* CSEQ Mode dependent, mode 8, page 2 setup. */
/* Tell the sequencer the bus address of the first SCB. */
asd_write_reg_addr(asd_ha, CSEQ_HQ_NEW_POINTER,
asd_ha->seq.next_scb.dma_handle);
ASD_DPRINTK("First SCB dma_handle: 0x%llx\n",
(unsigned long long)asd_ha->seq.next_scb.dma_handle);
/* Tell the sequencer the first Done List entry address. */
asd_write_reg_addr(asd_ha, CSEQ_HQ_DONE_BASE,
asd_ha->seq.actual_dl->dma_handle);
/* Initialize the Q_DONE_POINTER with the least significant
* 4 bytes of the first Done List address. */
asd_write_reg_dword(asd_ha, CSEQ_HQ_DONE_POINTER,
ASD_BUSADDR_LO(asd_ha->seq.actual_dl->dma_handle));
asd_write_reg_byte(asd_ha, CSEQ_HQ_DONE_PASS, ASD_DEF_DL_TOGGLE);
/* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */
}
/**
* asd_init_cseq_scratch -- setup and init CSEQ
* @asd_ha: pointer to host adapter structure
*
* Setup and initialize Central sequencers. Initialize the mode
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
* independent and dependent scratch page to the default settings.
*/
static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
{
asd_init_cseq_mip(asd_ha);
asd_init_cseq_mdp(asd_ha);
}
/**
* asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_lseq_mip(struct asd_ha_struct *asd_ha, u8 lseq)
{
int i;
/* LSEQ Mode independent page 0 setup. */
asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_HEAD(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_TAIL(lseq), 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_NUMBER(lseq), lseq);
asd_write_reg_byte(asd_ha, LmSEQ_SCRATCH_FLAGS(lseq),
ASD_NOTIFY_ENABLE_SPINUP);
asd_write_reg_dword(asd_ha, LmSEQ_CONNECTION_STATE(lseq),0x08000000);
asd_write_reg_word(asd_ha, LmSEQ_CONCTL(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_CONSTAT(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_CONNECTION_MODES(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_REG1_ISR(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_REG2_ISR(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_REG3_ISR(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq)+4, 0);
/* LSEQ Mode independent page 1 setup. */
asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR0(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR1(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR2(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR3(lseq), 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_HEAD(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_TAIL(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_TIMEOUT_CONST(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_SINDEX(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_DINDEX(lseq), 0);
/* LSEQ Mode Independent page 2 setup. */
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR0(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR1(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR2(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR3(lseq), 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD0(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD1(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD2(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD3(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_HEAD(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_TAIL(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_BUFS_AVAIL(lseq), 0);
for (i = 0; i < 12; i += 4)
asd_write_reg_dword(asd_ha, LmSEQ_ATA_SCR_REGS(lseq) + i, 0);
/* LSEQ Mode Independent page 3 setup. */
/* Device present timer timeout */
asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq),
ASD_DEV_PRESENT_TIMEOUT);
/* SATA interlock timer disabled */
asd_write_reg_dword(asd_ha, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq),
ASD_SATA_INTERLOCK_TIMEOUT);
/* STP shutdown timer timeout constant, IGNORED by the sequencer,
* always 0. */
asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq),
ASD_STP_SHUTDOWN_TIMEOUT);
asd_write_reg_dword(asd_ha, LmSEQ_SRST_ASSERT_TIMEOUT(lseq),
ASD_SRST_ASSERT_TIMEOUT);
asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMEOUT(lseq),
ASD_RCV_FIS_TIMEOUT);
asd_write_reg_dword(asd_ha, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq),
ASD_ONE_MILLISEC_TIMEOUT);
/* COM_INIT timer */
asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq),
ASD_TEN_MILLISEC_TIMEOUT);
asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMEOUT(lseq),
ASD_SMP_RCV_TIMEOUT);
}
/**
* asd_init_lseq_mdp -- initialize LSEQ mode dependent pages.
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
{
int i;
u32 moffs;
u16 ret_addr[] = {
0xFFFF, /* mode 0 */
0xFFFF, /* mode 1 */
mode2_task, /* mode 2 */
0,
0xFFFF, /* mode 4/5 */
0xFFFF, /* mode 4/5 */
};
/*
* Mode 0,1,2 and 4/5 have common field on page 0 for the first
* 14 bytes.
*/
for (i = 0; i < 3; i++) {
moffs = i * LSEQ_MODE_SCRATCH_SIZE;
asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)+moffs,
ret_addr[i]);
asd_write_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)+moffs, 0);
asd_write_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)+moffs, 0);
asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)+moffs,0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)+moffs,0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)+moffs,0);
asd_write_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)+moffs,0);
}
/*
* Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3.
*/
asd_write_reg_word(asd_ha,
LmSEQ_RET_ADDR(lseq)+LSEQ_MODE5_PAGE0_OFFSET,
ret_addr[5]);
asd_write_reg_word(asd_ha,
LmSEQ_REG0_MODE(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
asd_write_reg_word(asd_ha,
LmSEQ_MODE_FLAGS(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
asd_write_reg_word(asd_ha,
LmSEQ_RET_ADDR2(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
asd_write_reg_word(asd_ha,
LmSEQ_RET_ADDR1(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
asd_write_reg_byte(asd_ha,
LmSEQ_OPCODE_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
asd_write_reg_word(asd_ha,
LmSEQ_DATA_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
/* LSEQ Mode dependent 0, page 0 setup. */
asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_DDB_SITE(lseq),
(u16)asd_ha->hw_prof.max_ddbs);
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_TRANS_CTX(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_RESP_LEN(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_SCB_SITE(lseq),
(u16)last_scb_site_no+1);
asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq),
(u16) ((LmM0INTEN_MASK & 0xFFFF0000) >> 16));
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2,
(u16) LmM0INTEN_MASK & 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_FRM_LEN(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_PROTOCOL(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_RESP_STATUS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_LAST_LOADED_SGE(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_SAVE_SCBPTR(lseq), 0);
/* LSEQ mode dependent, mode 1, page 0 setup. */
asd_write_reg_word(asd_ha, LmSEQ_Q_XMIT_HEAD(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_M1_EMPTY_TRANS_CTX(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_INI_CONN_TAG(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_FAILED_OPEN_STATUS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_XMIT_REQUEST_TYPE(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_M1_RESP_STATUS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_M1_LAST_LOADED_SGE(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_M1_SAVE_SCBPTR(lseq), 0);
/* LSEQ Mode dependent mode 2, page 0 setup */
asd_write_reg_word(asd_ha, LmSEQ_PORT_COUNTER(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_PM_TABLE_PTR(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_IP_BITL(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_COPY_SMP_CONN_TAG(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_P0M2_OFFS1AH(lseq), 0);
/* LSEQ Mode dependent, mode 4/5, page 0 setup. */
asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_STATUS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_MODE(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_Q_LINK_HEAD(lseq), 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_ERR(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_SIGNALS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SAS_RESET_MODE(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_RESET_RETRY_COUNT(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_NUM_LINK_RESET_RETRIES(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
/*
* Set the desired interval between transmissions of the NOTIFY
* (ENABLE SPINUP) primitive. Must be initialized to val - 1.
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
*/
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
ASD_NOTIFY_TIMEOUT - 1);
/* No delay for the first NOTIFY to be sent to the attached target. */
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq),
ASD_NOTIFY_DOWN_COUNT);
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(lseq),
ASD_NOTIFY_DOWN_COUNT);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
/* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */
for (i = 0; i < 2; i++) {
int j;
/* Start from Page 1 of Mode 0 and 1. */
moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
/* All the fields of page 1 can be initialized to 0. */
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
}
/* LSEQ Mode dependent, mode 2, page 1 setup. */
asd_write_reg_dword(asd_ha, LmSEQ_INVALID_DWORD_COUNT(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_DISPARITY_ERROR_COUNT(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_LOSS_OF_SYNC_COUNT(lseq), 0);
/* LSEQ Mode dependent, mode 4/5, page 1. */
for (i = 0; i < LSEQ_PAGE_SIZE; i+=4)
asd_write_reg_dword(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq)+i, 0);
asd_write_reg_byte(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq), 0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq), 0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+1,0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+2,0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq), 0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+1, 0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+2, 0xFF);
asd_write_reg_dword(asd_ha, LmSEQ_DATA_OFFSET(lseq), 0xFFFFFFFF);
/* LSEQ Mode dependent, mode 0, page 2 setup. */
asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_DEVICE_BITS(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_SDB_DDB(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SDB_NUM_TAGS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SDB_CURR_TAG(lseq), 0);
/* LSEQ Mode Dependent 1, page 2 setup. */
asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq)+4, 0);
asd_write_reg_dword(asd_ha, LmSEQ_OPEN_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_LAST_LOADED_SG_EL(lseq), 0);
/* LSEQ Mode Dependent 2, page 2 setup. */
/* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer,
* i.e. always 0. */
asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq),0);
asd_write_reg_dword(asd_ha, LmSEQ_CLOSE_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_BREAK_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq),0);
asd_write_reg_dword(asd_ha, LmSEQ_MCTL_TIMER_TERM_TS(lseq), 0);
/* LSEQ Mode Dependent 4/5, page 2 setup. */
asd_write_reg_dword(asd_ha, LmSEQ_COMINIT_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq), 0);
}
/**
* asd_init_lseq_scratch -- setup and init link sequencers
* @asd_ha: pointer to host adapter struct
*/
static void asd_init_lseq_scratch(struct asd_ha_struct *asd_ha)
{
u8 lseq;
u8 lseq_mask;
lseq_mask = asd_ha->hw_prof.enabled_phys;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
asd_init_lseq_mip(asd_ha, lseq);
asd_init_lseq_mdp(asd_ha, lseq);
}
}
/**
* asd_init_scb_sites -- initialize sequencer SCB sites (memory).
* @asd_ha: pointer to host adapter structure
*
* This should be done before initializing common CSEQ and LSEQ
* scratch since those areas depend on some computed values here,
* last_scb_site_no, etc.
*/
static void asd_init_scb_sites(struct asd_ha_struct *asd_ha)
{
u16 site_no;
u16 max_scbs = 0;
for (site_no = asd_ha->hw_prof.max_scbs-1;
site_no != (u16) -1;
site_no--) {
u16 i;
/* Initialize all fields in the SCB site to 0. */
for (i = 0; i < ASD_SCB_SIZE; i += 4)
asd_scbsite_write_dword(asd_ha, site_no, i, 0);
/* Initialize SCB Site Opcode field to invalid. */
asd_scbsite_write_byte(asd_ha, site_no,
offsetof(struct scb_header, opcode),
0xFF);
/* Initialize SCB Site Flags field to mean a response
* frame has been received. This means inadvertent
* frames received to be dropped. */
asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
/* Workaround needed by SEQ to fix a SATA issue is to exclude
* certain SCB sites from the free list. */
if (!SCB_SITE_VALID(site_no))
continue;
if (last_scb_site_no == 0)
last_scb_site_no = site_no;
/* For every SCB site, we need to initialize the
* following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS,
* and SG Element Flag. */
/* Q_NEXT field of the last SCB is invalidated. */
asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no);
first_scb_site_no = site_no;
max_scbs++;
}
asd_ha->hw_prof.max_scbs = max_scbs;
ASD_DPRINTK("max_scbs:%d\n", asd_ha->hw_prof.max_scbs);
ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no);
ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no);
}
/**
* asd_init_cseq_cio - initialize CSEQ CIO registers
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
{
int i;
asd_write_reg_byte(asd_ha, CSEQCOMINTEN, 0);
asd_write_reg_byte(asd_ha, CSEQDLCTL, ASD_DL_SIZE_BITS);
asd_write_reg_byte(asd_ha, CSEQDLOFFS, 0);
asd_write_reg_byte(asd_ha, CSEQDLOFFS+1, 0);
asd_ha->seq.scbpro = 0;
asd_write_reg_dword(asd_ha, SCBPRO, 0);
asd_write_reg_dword(asd_ha, CSEQCON, 0);
/* Initialize CSEQ Mode 11 Interrupt Vectors.
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
* The addresses are 16 bit wide and in dword units.
* The values of their macros are in byte units.
* Thus we have to divide by 4. */
asd_write_reg_word(asd_ha, CM11INTVEC0, cseq_vecs[0]);
asd_write_reg_word(asd_ha, CM11INTVEC1, cseq_vecs[1]);
asd_write_reg_word(asd_ha, CM11INTVEC2, cseq_vecs[2]);
/* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
asd_write_reg_byte(asd_ha, CARP2INTEN, EN_ARP2HALTC);
/* Initialize CSEQ Scratch Page to 0x04. */
asd_write_reg_byte(asd_ha, CSCRATCHPAGE, 0x04);
/* Initialize CSEQ Mode[0-8] Dependent registers. */
/* Initialize Scratch Page to 0. */
for (i = 0; i < 9; i++)
asd_write_reg_byte(asd_ha, CMnSCRATCHPAGE(i), 0);
/* Reset the ARP2 Program Count. */
asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
for (i = 0; i < 8; i++) {
/* Initialize Mode n Link m Interrupt Enable. */
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
/* Initialize Mode n Request Mailbox. */
asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
}
}
/**
* asd_init_lseq_cio -- initialize LmSEQ CIO registers
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_lseq_cio(struct asd_ha_struct *asd_ha, int lseq)
{
u8 *sas_addr;
int i;
/* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
asd_write_reg_dword(asd_ha, LmARP2INTEN(lseq), EN_ARP2HALTC);
asd_write_reg_byte(asd_ha, LmSCRATCHPAGE(lseq), 0);
/* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */
for (i = 0; i < 3; i++)
asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, i), 0);
/* Initialize Mode 5 SCRATCHPAGE to 0. */
asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, 5), 0);
asd_write_reg_dword(asd_ha, LmRSPMBX(lseq), 0);
/* Initialize Mode 0,1,2 and 5 Interrupt Enable and
* Interrupt registers. */
asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 0), LmM0INTEN_MASK);
asd_write_reg_dword(asd_ha, LmMnINT(lseq, 0), 0xFFFFFFFF);
/* Mode 1 */
asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 1), LmM1INTEN_MASK);
asd_write_reg_dword(asd_ha, LmMnINT(lseq, 1), 0xFFFFFFFF);
/* Mode 2 */
asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 2), LmM2INTEN_MASK);
asd_write_reg_dword(asd_ha, LmMnINT(lseq, 2), 0xFFFFFFFF);
/* Mode 5 */
asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 5), LmM5INTEN_MASK);
asd_write_reg_dword(asd_ha, LmMnINT(lseq, 5), 0xFFFFFFFF);
/* Enable HW Timer status. */
asd_write_reg_byte(asd_ha, LmHWTSTATEN(lseq), LmHWTSTATEN_MASK);
/* Enable Primitive Status 0 and 1. */
asd_write_reg_dword(asd_ha, LmPRIMSTAT0EN(lseq), LmPRIMSTAT0EN_MASK);
asd_write_reg_dword(asd_ha, LmPRIMSTAT1EN(lseq), LmPRIMSTAT1EN_MASK);
/* Enable Frame Error. */
asd_write_reg_dword(asd_ha, LmFRMERREN(lseq), LmFRMERREN_MASK);
asd_write_reg_byte(asd_ha, LmMnHOLDLVL(lseq, 0), 0x50);
/* Initialize Mode 0 Transfer Level to 512. */
asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 0), LmMnXFRLVL_512);
/* Initialize Mode 1 Transfer Level to 256. */
asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 1), LmMnXFRLVL_256);
/* Initialize Program Count. */
asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
/* Enable Blind SG Move. */
asd_write_reg_dword(asd_ha, LmMODECTL(lseq), LmBLIND48);
asd_write_reg_word(asd_ha, LmM3SATATIMER(lseq),
ASD_SATA_INTERLOCK_TIMEOUT);
(void) asd_read_reg_dword(asd_ha, LmREQMBX(lseq));
/* Clear Primitive Status 0 and 1. */
asd_write_reg_dword(asd_ha, LmPRMSTAT0(lseq), 0xFFFFFFFF);
asd_write_reg_dword(asd_ha, LmPRMSTAT1(lseq), 0xFFFFFFFF);
/* Clear HW Timer status. */
asd_write_reg_byte(asd_ha, LmHWTSTAT(lseq), 0xFF);
/* Clear DMA Errors for Mode 0 and 1. */
asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 0), 0xFF);
asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 1), 0xFF);
/* Clear SG DMA Errors for Mode 0 and 1. */
asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 0), 0xFF);
asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 1), 0xFF);
/* Clear Mode 0 Buffer Parity Error. */
asd_write_reg_byte(asd_ha, LmMnBUFSTAT(lseq, 0), LmMnBUFPERR);
/* Clear Mode 0 Frame Error register. */
asd_write_reg_dword(asd_ha, LmMnFRMERR(lseq, 0), 0xFFFFFFFF);
/* Reset LSEQ external interrupt arbiter. */
asd_write_reg_byte(asd_ha, LmARP2INTCTL(lseq), RSTINTCTL);
/* Set the Phy SAS for the LmSEQ WWN. */
sas_addr = asd_ha->phys[lseq].phy_desc->sas_addr;
for (i = 0; i < SAS_ADDR_SIZE; i++)
asd_write_reg_byte(asd_ha, LmWWN(lseq) + i, sas_addr[i]);
/* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */
asd_write_reg_byte(asd_ha, LmMnXMTSIZE(lseq, 1), 0);
/* Set the Bus Inactivity Time Limit Timer. */
asd_write_reg_word(asd_ha, LmBITL_TIMER(lseq), 9);
/* Enable SATA Port Multiplier. */
asd_write_reg_byte(asd_ha, LmMnSATAFS(lseq, 1), 0x80);
/* Initialize Interrupt Vector[0-10] address in Mode 3.
* See the comment on CSEQ_INT_* */
asd_write_reg_word(asd_ha, LmM3INTVEC0(lseq), lseq_vecs[0]);
asd_write_reg_word(asd_ha, LmM3INTVEC1(lseq), lseq_vecs[1]);
asd_write_reg_word(asd_ha, LmM3INTVEC2(lseq), lseq_vecs[2]);
asd_write_reg_word(asd_ha, LmM3INTVEC3(lseq), lseq_vecs[3]);
asd_write_reg_word(asd_ha, LmM3INTVEC4(lseq), lseq_vecs[4]);
asd_write_reg_word(asd_ha, LmM3INTVEC5(lseq), lseq_vecs[5]);
asd_write_reg_word(asd_ha, LmM3INTVEC6(lseq), lseq_vecs[6]);
asd_write_reg_word(asd_ha, LmM3INTVEC7(lseq), lseq_vecs[7]);
asd_write_reg_word(asd_ha, LmM3INTVEC8(lseq), lseq_vecs[8]);
asd_write_reg_word(asd_ha, LmM3INTVEC9(lseq), lseq_vecs[9]);
asd_write_reg_word(asd_ha, LmM3INTVEC10(lseq), lseq_vecs[10]);
/*
* Program the Link LED control, applicable only for
* Chip Rev. B or later.
*/
asd_write_reg_dword(asd_ha, LmCONTROL(lseq),
(LEDTIMER | LEDMODE_TXRX | LEDTIMERS_100ms));
/* Set the Align Rate for SAS and STP mode. */
asd_write_reg_byte(asd_ha, LmM1SASALIGN(lseq), SAS_ALIGN_DEFAULT);
asd_write_reg_byte(asd_ha, LmM1STPALIGN(lseq), STP_ALIGN_DEFAULT);
}
/**
* asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox
* @asd_ha: pointer to host adapter struct
*/
static void asd_post_init_cseq(struct asd_ha_struct *asd_ha)
{
int i;
for (i = 0; i < 8; i++)
asd_write_reg_dword(asd_ha, CMnINT(i), 0xFFFFFFFF);
for (i = 0; i < 8; i++)
asd_read_reg_dword(asd_ha, CMnRSPMBX(i));
/* Reset the external interrupt arbiter. */
asd_write_reg_byte(asd_ha, CARP2INTCTL, RSTINTCTL);
}
/**
* asd_init_ddb_0 -- initialize DDB 0
* @asd_ha: pointer to host adapter structure
*
* Initialize DDB site 0 which is used internally by the sequencer.
*/
static void asd_init_ddb_0(struct asd_ha_struct *asd_ha)
{
int i;
/* Zero out the DDB explicitly */
for (i = 0; i < sizeof(struct asd_ddb_seq_shared); i+=4)
asd_ddbsite_write_dword(asd_ha, 0, i, 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_free_ddb_head), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_free_ddb_tail),
asd_ha->hw_prof.max_ddbs-1);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_free_ddb_cnt), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_used_ddb_head), 0xFFFF);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_used_ddb_tail), 0xFFFF);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, shared_mem_lock), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, smp_conn_tag), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, est_nexus_buf_cnt), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, est_nexus_buf_thresh),
asd_ha->hw_prof.num_phys * 2);
asd_ddbsite_write_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, settable_max_contexts),0);
asd_ddbsite_write_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, conn_not_active), 0xFF);
asd_ddbsite_write_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, phy_is_up), 0x00);
/* DDB 0 is reserved */
set_bit(0, asd_ha->hw_prof.ddb_bitmap);
}
static void asd_seq_init_ddb_sites(struct asd_ha_struct *asd_ha)
{
unsigned int i;
unsigned int ddb_site;
for (ddb_site = 0 ; ddb_site < ASD_MAX_DDBS; ddb_site++)
for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4)
asd_ddbsite_write_dword(asd_ha, ddb_site, i, 0);
}
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
/**
* asd_seq_setup_seqs -- setup and initialize central and link sequencers
* @asd_ha: pointer to host adapter structure
*/
static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha)
{
int lseq;
u8 lseq_mask;
/* Initialize DDB sites */
asd_seq_init_ddb_sites(asd_ha);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
/* Initialize SCB sites. Done first to compute some values which
* the rest of the init code depends on. */
asd_init_scb_sites(asd_ha);
/* Initialize CSEQ Scratch RAM registers. */
asd_init_cseq_scratch(asd_ha);
/* Initialize LmSEQ Scratch RAM registers. */
asd_init_lseq_scratch(asd_ha);
/* Initialize CSEQ CIO registers. */
asd_init_cseq_cio(asd_ha);
asd_init_ddb_0(asd_ha);
/* Initialize LmSEQ CIO registers. */
lseq_mask = asd_ha->hw_prof.enabled_phys;
for_each_sequencer(lseq_mask, lseq_mask, lseq)
asd_init_lseq_cio(asd_ha, lseq);
asd_post_init_cseq(asd_ha);
}
/**
* asd_seq_start_cseq -- start the central sequencer, CSEQ
* @asd_ha: pointer to host adapter structure
*/
static int asd_seq_start_cseq(struct asd_ha_struct *asd_ha)
{
/* Reset the ARP2 instruction to location zero. */
asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
/* Unpause the CSEQ */
return asd_unpause_cseq(asd_ha);
}
/**
* asd_seq_start_lseq -- start a link sequencer
* @asd_ha: pointer to host adapter structure
* @lseq: the link sequencer of interest
*/
static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
{
/* Reset the ARP2 instruction to location zero. */
asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
/* Unpause the LmSEQ */
return asd_seq_unpause_lseq(asd_ha, lseq);
}
int asd_release_firmware(void)
{
release_firmware(sequencer_fw);
return 0;
}
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
static int asd_request_firmware(struct asd_ha_struct *asd_ha)
{
int err, i;
struct sequencer_file_header header;
const struct sequencer_file_header *hdr_ptr;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
u32 csum = 0;
u16 *ptr_cseq_vecs, *ptr_lseq_vecs;
if (sequencer_fw)
/* already loaded */
return 0;
err = request_firmware(&sequencer_fw,
SAS_RAZOR_SEQUENCER_FW_FILE,
&asd_ha->pcidev->dev);
if (err)
return err;
hdr_ptr = (const struct sequencer_file_header *)sequencer_fw->data;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
header.csum = le32_to_cpu(hdr_ptr->csum);
header.major = le32_to_cpu(hdr_ptr->major);
header.minor = le32_to_cpu(hdr_ptr->minor);
header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset);
header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size);
header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset);
header.lseq_table_size = le32_to_cpu(hdr_ptr->lseq_table_size);
header.cseq_code_offset = le32_to_cpu(hdr_ptr->cseq_code_offset);
header.cseq_code_size = le32_to_cpu(hdr_ptr->cseq_code_size);
header.lseq_code_offset = le32_to_cpu(hdr_ptr->lseq_code_offset);
header.lseq_code_size = le32_to_cpu(hdr_ptr->lseq_code_size);
header.mode2_task = le16_to_cpu(hdr_ptr->mode2_task);
header.cseq_idle_loop = le16_to_cpu(hdr_ptr->cseq_idle_loop);
header.lseq_idle_loop = le16_to_cpu(hdr_ptr->lseq_idle_loop);
for (i = sizeof(header.csum); i < sequencer_fw->size; i++)
csum += sequencer_fw->data[i];
if (csum != header.csum) {
asd_printk("Firmware file checksum mismatch\n");
return -EINVAL;
}
if (header.cseq_table_size != CSEQ_NUM_VECS ||
header.lseq_table_size != LSEQ_NUM_VECS) {
asd_printk("Firmware file table size mismatch\n");
return -EINVAL;
}
asd_printk("Found sequencer Firmware version %d.%d (%s)\n",
header.major, header.minor, hdr_ptr->version);
if (header.major != SAS_RAZOR_SEQUENCER_FW_MAJOR) {
asd_printk("Firmware Major Version Mismatch;"
"driver requires version %d.X",
SAS_RAZOR_SEQUENCER_FW_MAJOR);
return -EINVAL;
}
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset];
ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset];
mode2_task = header.mode2_task;
cseq_idle_loop = header.cseq_idle_loop;
lseq_idle_loop = header.lseq_idle_loop;
for (i = 0; i < CSEQ_NUM_VECS; i++)
cseq_vecs[i] = le16_to_cpu(ptr_cseq_vecs[i]);
for (i = 0; i < LSEQ_NUM_VECS; i++)
lseq_vecs[i] = le16_to_cpu(ptr_lseq_vecs[i]);
cseq_code = &sequencer_fw->data[header.cseq_code_offset];
cseq_code_size = header.cseq_code_size;
lseq_code = &sequencer_fw->data[header.lseq_code_offset];
lseq_code_size = header.lseq_code_size;
return 0;
}
int asd_init_seqs(struct asd_ha_struct *asd_ha)
{
int err;
err = asd_request_firmware(asd_ha);
if (err) {
asd_printk("Failed to load sequencer firmware file %s, error %d\n",
SAS_RAZOR_SEQUENCER_FW_FILE, err);
return err;
}
err = asd_seq_download_seqs(asd_ha);
if (err) {
asd_printk("couldn't download sequencers for %s\n",
pci_name(asd_ha->pcidev));
return err;
}
asd_seq_setup_seqs(asd_ha);
return 0;
}
int asd_start_seqs(struct asd_ha_struct *asd_ha)
{
int err;
u8 lseq_mask;
int lseq;
err = asd_seq_start_cseq(asd_ha);
if (err) {
asd_printk("couldn't start CSEQ for %s\n",
pci_name(asd_ha->pcidev));
return err;
}
lseq_mask = asd_ha->hw_prof.enabled_phys;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
err = asd_seq_start_lseq(asd_ha, lseq);
if (err) {
asd_printk("couldn't start LSEQ %d for %s\n", lseq,
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
pci_name(asd_ha->pcidev));
return err;
}
}
return 0;
}
/**
* asd_update_port_links -- update port_map_by_links and phy_is_up
* @sas_phy: pointer to the phy which has been added to a port
*
* 1) When a link reset has completed and we got BYTES DMAED with a
* valid frame we call this function for that phy, to indicate that
* the phy is up, i.e. we update the phy_is_up in DDB 0. The
* sequencer checks phy_is_up when pending SCBs are to be sent, and
* when an open address frame has been received.
*
* 2) When we know of ports, we call this function to update the map
* of phys participaing in that port, i.e. we update the
* port_map_by_links in DDB 0. When a HARD_RESET primitive has been
* received, the sequencer disables all phys in that port.
* port_map_by_links is also used as the conn_mask byte in the
* initiator/target port DDB.
*/
void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
{
const u8 phy_mask = (u8) phy->asd_port->phy_mask;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
u8 phy_is_up;
u8 mask;
int i, err;
unsigned long flags;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
for_each_phy(phy_mask, mask, i)
asd_ddbsite_write_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared,
port_map_by_links)+i,phy_mask);
for (i = 0; i < 12; i++) {
phy_is_up = asd_ddbsite_read_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, phy_is_up));
err = asd_ddbsite_update_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, phy_is_up),
phy_is_up,
phy_is_up | phy_mask);
if (!err)
break;
else if (err == -EFAULT) {
asd_printk("phy_is_up: parity error in DDB 0\n");
break;
}
}
spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
if (err)
asd_printk("couldn't update DDB 0:error:%d\n", err);
}
MODULE_FIRMWARE(SAS_RAZOR_SEQUENCER_FW_FILE);