linux/drivers/block/nbd.c

1154 lines
27 KiB
C
Raw Normal View History

/*
* Network block device - make block devices work over TCP
*
* Note that you can not swap over this thing, yet. Seems to work but
* deadlocks sometimes - you can not swap over TCP in general.
*
* Copyright 1997-2000, 2008 Pavel Machek <pavel@ucw.cz>
* Parts copyright 2001 Steven Whitehouse <steve@chygwyn.com>
*
* This file is released under GPLv2 or later.
*
* (part of code stolen from loop.c)
*/
#include <linux/major.h>
#include <linux/blkdev.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/bio.h>
#include <linux/stat.h>
#include <linux/errno.h>
#include <linux/file.h>
#include <linux/ioctl.h>
#include <linux/mutex.h>
[PATCH] nbd: fix TX/RX race condition Janos Haar of First NetCenter Bt. reported numerous crashes involving the NBD driver. With his help, this was tracked down to bogus bio vectors which in turn was the result of a race condition between the receive/transmit routines in the NBD driver. The bug manifests itself like this: CPU0 CPU1 do_nbd_request add req to queuelist nbd_send_request send req head for each bio kmap send nbd_read_stat nbd_find_request nbd_end_request kunmap When CPU1 finishes nbd_end_request, the request and all its associated bio's are freed. So when CPU0 calls kunmap whose argument is derived from the last bio, it may crash. Under normal circumstances, the race occurs only on the last bio. However, if an error is encountered on the remote NBD server (such as an incorrect magic number in the request), or if there were a bug in the server, it is possible for the nbd_end_request to occur any time after the request's addition to the queuelist. The following patch fixes this problem by making sure that requests are not added to the queuelist until after they have been completed transmission. In order for the receiving side to be ready for responses involving requests still being transmitted, the patch introduces the concept of the active request. When a response matches the current active request, its processing is delayed until after the tranmission has come to a stop. This has been tested by Janos and it has been successful in curing this race condition. From: Herbert Xu <herbert@gondor.apana.org.au> Here is an updated patch which removes the active_req wait in nbd_clear_queue and the associated memory barrier. I've also clarified this in the comment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: <djani22@dynamicweb.hu> Cc: Paul Clements <Paul.Clements@SteelEye.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:09:47 +00:00
#include <linux/compiler.h>
#include <linux/err.h>
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <net/sock.h>
#include <linux/net.h>
#include <linux/kthread.h>
#include <linux/types.h>
#include <linux/debugfs.h>
#include <linux/blk-mq.h>
#include <linux/uaccess.h>
#include <asm/types.h>
#include <linux/nbd.h>
struct nbd_sock {
struct socket *sock;
struct mutex tx_lock;
};
#define NBD_TIMEDOUT 0
#define NBD_DISCONNECT_REQUESTED 1
#define NBD_DISCONNECTED 2
#define NBD_RUNNING 3
struct nbd_device {
u32 flags;
unsigned long runtime_flags;
struct nbd_sock **socks;
int magic;
struct blk_mq_tag_set tag_set;
struct mutex config_lock;
struct gendisk *disk;
int num_connections;
atomic_t recv_threads;
wait_queue_head_t recv_wq;
loff_t blksize;
loff_t bytesize;
nbd: Fix timeout detection At the moment the nbd timeout just detects hanging tcp operations. This is not enough to detect a hanging or bad connection as expected of a timeout. This patch redesigns the timeout detection to include some more cases. The timeout is now in relation to replies from the server. If the server does not send replies within the timeout the connection will be shut down. The patch adds a continous timer 'timeout_timer' that is setup in one of two cases: - The request list is empty and we are sending the first request out to the server. We want to have a reply within the given timeout, otherwise we consider the connection to be dead. - A server response was received. This means the server is still communicating with us. The timer is reset to the timeout value. The timer is not stopped if the list becomes empty. It will just trigger a timeout which will directly leave the handling routine again as the request list is empty. The whole patch does not use any additional explicit locking. The list_empty() calls are safe to be used concurrently. The timer is locked internally as we just use mod_timer and del_timer_sync(). The patch is based on the idea of Michal Belczyk with a previous different implementation. Cc: Michal Belczyk <belczyk@bsd.krakow.pl> Cc: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 06:20:00 +00:00
struct task_struct *task_recv;
struct task_struct *task_setup;
#if IS_ENABLED(CONFIG_DEBUG_FS)
struct dentry *dbg_dir;
#endif
};
struct nbd_cmd {
struct nbd_device *nbd;
struct completion send_complete;
};
#if IS_ENABLED(CONFIG_DEBUG_FS)
static struct dentry *nbd_dbg_dir;
#endif
#define nbd_name(nbd) ((nbd)->disk->disk_name)
#define NBD_MAGIC 0x68797548
static unsigned int nbds_max = 16;
static struct nbd_device *nbd_dev;
NBD: add partition support Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:51 +00:00
static int max_part;
static inline struct device *nbd_to_dev(struct nbd_device *nbd)
{
return disk_to_dev(nbd->disk);
}
static bool nbd_is_connected(struct nbd_device *nbd)
{
return !!nbd->task_recv;
}
static const char *nbdcmd_to_ascii(int cmd)
{
switch (cmd) {
case NBD_CMD_READ: return "read";
case NBD_CMD_WRITE: return "write";
case NBD_CMD_DISC: return "disconnect";
nbd: support FLUSH requests Currently, the NBD device does not accept flush requests from the Linux block layer. If the NBD server opened the target with neither O_SYNC nor O_DSYNC, however, the device will be effectively backed by a writeback cache. Without issuing flushes properly, operation of the NBD device will not be safe against power losses. The NBD protocol has support for both a cache flush command and a FUA command flag; the server will also pass a flag to note its support for these features. This patch adds support for the cache flush command and flag. In the kernel, we receive the flags via the NBD_SET_FLAGS ioctl, and map NBD_FLAG_SEND_FLUSH to the argument of blk_queue_flush. When the flag is active the block layer will send REQ_FLUSH requests, which we translate to NBD_CMD_FLUSH commands. FUA support is not included in this patch because all free software servers implement it with a full fdatasync; thus it has no advantage over supporting flush only. Because I [Paolo] cannot really benchmark it in a realistic scenario, I cannot tell if it is a good idea or not. It is also not clear if it is valid for an NBD server to support FUA but not flush. The Linux block layer gives a warning for this combination, the NBD protocol documentation says nothing about it. The patch also fixes a small problem in the handling of flags: nbd->flags must be cleared at the end of NBD_DO_IT, but the driver was not doing that. The bug manifests itself as follows. Suppose you two different client/server pairs to start the NBD device. Suppose also that the first client supports NBD_SET_FLAGS, and the first server sends NBD_FLAG_SEND_FLUSH; the second pair instead does neither of these two things. Before this patch, the second invocation of NBD_DO_IT will use a stale value of nbd->flags, and the second server will issue an error every time it receives an NBD_CMD_FLUSH command. This bug is pre-existing, but it becomes much more important after this patch; flush failures make the device pretty much unusable, unlike Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bligh <alex@alex.org.uk> Acked-by: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:05:23 +00:00
case NBD_CMD_FLUSH: return "flush";
case NBD_CMD_TRIM: return "trim/discard";
}
return "invalid";
}
static int nbd_size_clear(struct nbd_device *nbd, struct block_device *bdev)
{
bdev->bd_inode->i_size = 0;
set_capacity(nbd->disk, 0);
kobject_uevent(&nbd_to_dev(nbd)->kobj, KOBJ_CHANGE);
return 0;
}
static void nbd_size_update(struct nbd_device *nbd, struct block_device *bdev)
{
if (!nbd_is_connected(nbd))
return;
bdev->bd_inode->i_size = nbd->bytesize;
set_capacity(nbd->disk, nbd->bytesize >> 9);
kobject_uevent(&nbd_to_dev(nbd)->kobj, KOBJ_CHANGE);
}
static int nbd_size_set(struct nbd_device *nbd, struct block_device *bdev,
loff_t blocksize, loff_t nr_blocks)
{
int ret;
ret = set_blocksize(bdev, blocksize);
if (ret)
return ret;
nbd->blksize = blocksize;
nbd->bytesize = blocksize * nr_blocks;
nbd_size_update(nbd, bdev);
return 0;
}
static void nbd_end_request(struct nbd_cmd *cmd)
{
struct nbd_device *nbd = cmd->nbd;
struct request *req = blk_mq_rq_from_pdu(cmd);
int error = req->errors ? -EIO : 0;
dev_dbg(nbd_to_dev(nbd), "request %p: %s\n", cmd,
error ? "failed" : "done");
blk_mq_complete_request(req, error);
}
/*
* Forcibly shutdown the socket causing all listeners to error
*/
static void sock_shutdown(struct nbd_device *nbd)
{
int i;
if (nbd->num_connections == 0)
return;
if (test_and_set_bit(NBD_DISCONNECTED, &nbd->runtime_flags))
return;
for (i = 0; i < nbd->num_connections; i++) {
struct nbd_sock *nsock = nbd->socks[i];
mutex_lock(&nsock->tx_lock);
kernel_sock_shutdown(nsock->sock, SHUT_RDWR);
mutex_unlock(&nsock->tx_lock);
}
dev_warn(disk_to_dev(nbd->disk), "shutting down sockets\n");
}
static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req,
bool reserved)
{
struct nbd_cmd *cmd = blk_mq_rq_to_pdu(req);
struct nbd_device *nbd = cmd->nbd;
dev_err(nbd_to_dev(nbd), "Connection timed out, shutting down connection\n");
set_bit(NBD_TIMEDOUT, &nbd->runtime_flags);
req->errors++;
/*
* If our disconnect packet times out then we're already holding the
* config_lock and could deadlock here, so just set an error and return,
* we'll handle shutting everything down later.
*/
if (req->cmd_type == REQ_TYPE_DRV_PRIV)
return BLK_EH_HANDLED;
mutex_lock(&nbd->config_lock);
sock_shutdown(nbd);
mutex_unlock(&nbd->config_lock);
return BLK_EH_HANDLED;
}
/*
* Send or receive packet.
*/
static int sock_xmit(struct nbd_device *nbd, int index, int send, void *buf,
int size, int msg_flags)
{
struct socket *sock = nbd->socks[index]->sock;
int result;
struct msghdr msg;
struct kvec iov;
unsigned long pflags = current->flags;
if (unlikely(!sock)) {
dev_err_ratelimited(disk_to_dev(nbd->disk),
"Attempted %s on closed socket in sock_xmit\n",
(send ? "send" : "recv"));
return -EINVAL;
}
current->flags |= PF_MEMALLOC;
do {
sock->sk->sk_allocation = GFP_NOIO | __GFP_MEMALLOC;
iov.iov_base = buf;
iov.iov_len = size;
msg.msg_name = NULL;
msg.msg_namelen = 0;
msg.msg_control = NULL;
msg.msg_controllen = 0;
msg.msg_flags = msg_flags | MSG_NOSIGNAL;
nbd: Fix timeout detection At the moment the nbd timeout just detects hanging tcp operations. This is not enough to detect a hanging or bad connection as expected of a timeout. This patch redesigns the timeout detection to include some more cases. The timeout is now in relation to replies from the server. If the server does not send replies within the timeout the connection will be shut down. The patch adds a continous timer 'timeout_timer' that is setup in one of two cases: - The request list is empty and we are sending the first request out to the server. We want to have a reply within the given timeout, otherwise we consider the connection to be dead. - A server response was received. This means the server is still communicating with us. The timer is reset to the timeout value. The timer is not stopped if the list becomes empty. It will just trigger a timeout which will directly leave the handling routine again as the request list is empty. The whole patch does not use any additional explicit locking. The list_empty() calls are safe to be used concurrently. The timer is locked internally as we just use mod_timer and del_timer_sync(). The patch is based on the idea of Michal Belczyk with a previous different implementation. Cc: Michal Belczyk <belczyk@bsd.krakow.pl> Cc: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 06:20:00 +00:00
if (send)
result = kernel_sendmsg(sock, &msg, &iov, 1, size);
nbd: Fix timeout detection At the moment the nbd timeout just detects hanging tcp operations. This is not enough to detect a hanging or bad connection as expected of a timeout. This patch redesigns the timeout detection to include some more cases. The timeout is now in relation to replies from the server. If the server does not send replies within the timeout the connection will be shut down. The patch adds a continous timer 'timeout_timer' that is setup in one of two cases: - The request list is empty and we are sending the first request out to the server. We want to have a reply within the given timeout, otherwise we consider the connection to be dead. - A server response was received. This means the server is still communicating with us. The timer is reset to the timeout value. The timer is not stopped if the list becomes empty. It will just trigger a timeout which will directly leave the handling routine again as the request list is empty. The whole patch does not use any additional explicit locking. The list_empty() calls are safe to be used concurrently. The timer is locked internally as we just use mod_timer and del_timer_sync(). The patch is based on the idea of Michal Belczyk with a previous different implementation. Cc: Michal Belczyk <belczyk@bsd.krakow.pl> Cc: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 06:20:00 +00:00
else
result = kernel_recvmsg(sock, &msg, &iov, 1, size,
msg.msg_flags);
if (result <= 0) {
if (result == 0)
result = -EPIPE; /* short read */
break;
}
size -= result;
buf += result;
} while (size > 0);
tsk_restore_flags(current, pflags, PF_MEMALLOC);
return result;
}
static inline int sock_send_bvec(struct nbd_device *nbd, int index,
struct bio_vec *bvec, int flags)
{
int result;
void *kaddr = kmap(bvec->bv_page);
result = sock_xmit(nbd, index, 1, kaddr + bvec->bv_offset,
bvec->bv_len, flags);
kunmap(bvec->bv_page);
return result;
}
/* always call with the tx_lock held */
static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
{
struct request *req = blk_mq_rq_from_pdu(cmd);
int result, flags;
struct nbd_request request;
unsigned long size = blk_rq_bytes(req);
struct bio *bio;
u32 type;
u32 tag = blk_mq_unique_tag(req);
if (req_op(req) == REQ_OP_DISCARD)
type = NBD_CMD_TRIM;
else if (req_op(req) == REQ_OP_FLUSH)
type = NBD_CMD_FLUSH;
else if (rq_data_dir(req) == WRITE)
type = NBD_CMD_WRITE;
else
type = NBD_CMD_READ;
memset(&request, 0, sizeof(request));
request.magic = htonl(NBD_REQUEST_MAGIC);
request.type = htonl(type);
if (type != NBD_CMD_FLUSH) {
nbd: support FLUSH requests Currently, the NBD device does not accept flush requests from the Linux block layer. If the NBD server opened the target with neither O_SYNC nor O_DSYNC, however, the device will be effectively backed by a writeback cache. Without issuing flushes properly, operation of the NBD device will not be safe against power losses. The NBD protocol has support for both a cache flush command and a FUA command flag; the server will also pass a flag to note its support for these features. This patch adds support for the cache flush command and flag. In the kernel, we receive the flags via the NBD_SET_FLAGS ioctl, and map NBD_FLAG_SEND_FLUSH to the argument of blk_queue_flush. When the flag is active the block layer will send REQ_FLUSH requests, which we translate to NBD_CMD_FLUSH commands. FUA support is not included in this patch because all free software servers implement it with a full fdatasync; thus it has no advantage over supporting flush only. Because I [Paolo] cannot really benchmark it in a realistic scenario, I cannot tell if it is a good idea or not. It is also not clear if it is valid for an NBD server to support FUA but not flush. The Linux block layer gives a warning for this combination, the NBD protocol documentation says nothing about it. The patch also fixes a small problem in the handling of flags: nbd->flags must be cleared at the end of NBD_DO_IT, but the driver was not doing that. The bug manifests itself as follows. Suppose you two different client/server pairs to start the NBD device. Suppose also that the first client supports NBD_SET_FLAGS, and the first server sends NBD_FLAG_SEND_FLUSH; the second pair instead does neither of these two things. Before this patch, the second invocation of NBD_DO_IT will use a stale value of nbd->flags, and the second server will issue an error every time it receives an NBD_CMD_FLUSH command. This bug is pre-existing, but it becomes much more important after this patch; flush failures make the device pretty much unusable, unlike Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bligh <alex@alex.org.uk> Acked-by: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:05:23 +00:00
request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
request.len = htonl(size);
}
memcpy(request.handle, &tag, sizeof(tag));
dev_dbg(nbd_to_dev(nbd), "request %p: sending control (%s@%llu,%uB)\n",
cmd, nbdcmd_to_ascii(type),
(unsigned long long)blk_rq_pos(req) << 9, blk_rq_bytes(req));
result = sock_xmit(nbd, index, 1, &request, sizeof(request),
(type == NBD_CMD_WRITE) ? MSG_MORE : 0);
if (result <= 0) {
dev_err_ratelimited(disk_to_dev(nbd->disk),
"Send control failed (result %d)\n", result);
return -EIO;
}
if (type != NBD_CMD_WRITE)
return 0;
flags = 0;
bio = req->bio;
while (bio) {
struct bio *next = bio->bi_next;
struct bvec_iter iter;
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-24 01:19:00 +00:00
struct bio_vec bvec;
bio_for_each_segment(bvec, bio, iter) {
bool is_last = !next && bio_iter_last(bvec, iter);
if (is_last)
flags = MSG_MORE;
dev_dbg(nbd_to_dev(nbd), "request %p: sending %d bytes data\n",
cmd, bvec.bv_len);
result = sock_send_bvec(nbd, index, &bvec, flags);
if (result <= 0) {
dev_err(disk_to_dev(nbd->disk),
"Send data failed (result %d)\n",
result);
return -EIO;
}
/*
* The completion might already have come in,
* so break for the last one instead of letting
* the iterator do it. This prevents use-after-free
* of the bio.
*/
if (is_last)
break;
}
bio = next;
}
return 0;
}
static inline int sock_recv_bvec(struct nbd_device *nbd, int index,
struct bio_vec *bvec)
{
int result;
void *kaddr = kmap(bvec->bv_page);
result = sock_xmit(nbd, index, 0, kaddr + bvec->bv_offset,
bvec->bv_len, MSG_WAITALL);
kunmap(bvec->bv_page);
return result;
}
/* NULL returned = something went wrong, inform userspace */
static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
{
int result;
struct nbd_reply reply;
struct nbd_cmd *cmd;
struct request *req = NULL;
u16 hwq;
u32 tag;
reply.magic = 0;
result = sock_xmit(nbd, index, 0, &reply, sizeof(reply), MSG_WAITALL);
if (result <= 0) {
if (!test_bit(NBD_DISCONNECTED, &nbd->runtime_flags) &&
!test_bit(NBD_DISCONNECT_REQUESTED, &nbd->runtime_flags))
dev_err(disk_to_dev(nbd->disk),
"Receive control failed (result %d)\n", result);
return ERR_PTR(result);
}
if (ntohl(reply.magic) != NBD_REPLY_MAGIC) {
dev_err(disk_to_dev(nbd->disk), "Wrong magic (0x%lx)\n",
(unsigned long)ntohl(reply.magic));
return ERR_PTR(-EPROTO);
}
memcpy(&tag, reply.handle, sizeof(u32));
[PATCH] nbd: fix TX/RX race condition Janos Haar of First NetCenter Bt. reported numerous crashes involving the NBD driver. With his help, this was tracked down to bogus bio vectors which in turn was the result of a race condition between the receive/transmit routines in the NBD driver. The bug manifests itself like this: CPU0 CPU1 do_nbd_request add req to queuelist nbd_send_request send req head for each bio kmap send nbd_read_stat nbd_find_request nbd_end_request kunmap When CPU1 finishes nbd_end_request, the request and all its associated bio's are freed. So when CPU0 calls kunmap whose argument is derived from the last bio, it may crash. Under normal circumstances, the race occurs only on the last bio. However, if an error is encountered on the remote NBD server (such as an incorrect magic number in the request), or if there were a bug in the server, it is possible for the nbd_end_request to occur any time after the request's addition to the queuelist. The following patch fixes this problem by making sure that requests are not added to the queuelist until after they have been completed transmission. In order for the receiving side to be ready for responses involving requests still being transmitted, the patch introduces the concept of the active request. When a response matches the current active request, its processing is delayed until after the tranmission has come to a stop. This has been tested by Janos and it has been successful in curing this race condition. From: Herbert Xu <herbert@gondor.apana.org.au> Here is an updated patch which removes the active_req wait in nbd_clear_queue and the associated memory barrier. I've also clarified this in the comment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: <djani22@dynamicweb.hu> Cc: Paul Clements <Paul.Clements@SteelEye.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:09:47 +00:00
hwq = blk_mq_unique_tag_to_hwq(tag);
if (hwq < nbd->tag_set.nr_hw_queues)
req = blk_mq_tag_to_rq(nbd->tag_set.tags[hwq],
blk_mq_unique_tag_to_tag(tag));
if (!req || !blk_mq_request_started(req)) {
dev_err(disk_to_dev(nbd->disk), "Unexpected reply (%d) %p\n",
tag, req);
return ERR_PTR(-ENOENT);
}
cmd = blk_mq_rq_to_pdu(req);
if (ntohl(reply.error)) {
dev_err(disk_to_dev(nbd->disk), "Other side returned error (%d)\n",
ntohl(reply.error));
req->errors++;
return cmd;
}
dev_dbg(nbd_to_dev(nbd), "request %p: got reply\n", cmd);
if (rq_data_dir(req) != WRITE) {
struct req_iterator iter;
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
2013-11-24 01:19:00 +00:00
struct bio_vec bvec;
rq_for_each_segment(bvec, req, iter) {
result = sock_recv_bvec(nbd, index, &bvec);
if (result <= 0) {
dev_err(disk_to_dev(nbd->disk), "Receive data failed (result %d)\n",
result);
req->errors++;
return cmd;
}
dev_dbg(nbd_to_dev(nbd), "request %p: got %d bytes data\n",
cmd, bvec.bv_len);
}
} else {
/* See the comment in nbd_queue_rq. */
wait_for_completion(&cmd->send_complete);
}
return cmd;
}
static ssize_t pid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct gendisk *disk = dev_to_disk(dev);
struct nbd_device *nbd = (struct nbd_device *)disk->private_data;
return sprintf(buf, "%d\n", task_pid_nr(nbd->task_recv));
}
static struct device_attribute pid_attr = {
.attr = { .name = "pid", .mode = S_IRUGO},
.show = pid_show,
};
struct recv_thread_args {
struct work_struct work;
struct nbd_device *nbd;
int index;
};
static void recv_work(struct work_struct *work)
{
struct recv_thread_args *args = container_of(work,
struct recv_thread_args,
work);
struct nbd_device *nbd = args->nbd;
struct nbd_cmd *cmd;
int ret = 0;
BUG_ON(nbd->magic != NBD_MAGIC);
while (1) {
cmd = nbd_read_stat(nbd, args->index);
if (IS_ERR(cmd)) {
ret = PTR_ERR(cmd);
break;
}
nbd_end_request(cmd);
}
/*
* We got an error, shut everybody down if this wasn't the result of a
* disconnect request.
*/
if (ret && !test_bit(NBD_DISCONNECT_REQUESTED, &nbd->runtime_flags))
sock_shutdown(nbd);
atomic_dec(&nbd->recv_threads);
wake_up(&nbd->recv_wq);
}
static void nbd_clear_req(struct request *req, void *data, bool reserved)
{
struct nbd_cmd *cmd;
if (!blk_mq_request_started(req))
return;
cmd = blk_mq_rq_to_pdu(req);
req->errors++;
nbd_end_request(cmd);
}
static void nbd_clear_que(struct nbd_device *nbd)
{
BUG_ON(nbd->magic != NBD_MAGIC);
blk_mq_tagset_busy_iter(&nbd->tag_set, nbd_clear_req, NULL);
dev_dbg(disk_to_dev(nbd->disk), "queue cleared\n");
}
static void nbd_handle_cmd(struct nbd_cmd *cmd, int index)
{
struct request *req = blk_mq_rq_from_pdu(cmd);
struct nbd_device *nbd = cmd->nbd;
struct nbd_sock *nsock;
if (index >= nbd->num_connections) {
dev_err_ratelimited(disk_to_dev(nbd->disk),
"Attempted send on invalid socket\n");
goto error_out;
}
if (test_bit(NBD_DISCONNECTED, &nbd->runtime_flags)) {
dev_err_ratelimited(disk_to_dev(nbd->disk),
"Attempted send on closed socket\n");
goto error_out;
}
if (req->cmd_type != REQ_TYPE_FS &&
req->cmd_type != REQ_TYPE_DRV_PRIV)
goto error_out;
if (req->cmd_type == REQ_TYPE_FS &&
rq_data_dir(req) == WRITE &&
(nbd->flags & NBD_FLAG_READ_ONLY)) {
dev_err_ratelimited(disk_to_dev(nbd->disk),
"Write on read-only\n");
goto error_out;
nbd: support FLUSH requests Currently, the NBD device does not accept flush requests from the Linux block layer. If the NBD server opened the target with neither O_SYNC nor O_DSYNC, however, the device will be effectively backed by a writeback cache. Without issuing flushes properly, operation of the NBD device will not be safe against power losses. The NBD protocol has support for both a cache flush command and a FUA command flag; the server will also pass a flag to note its support for these features. This patch adds support for the cache flush command and flag. In the kernel, we receive the flags via the NBD_SET_FLAGS ioctl, and map NBD_FLAG_SEND_FLUSH to the argument of blk_queue_flush. When the flag is active the block layer will send REQ_FLUSH requests, which we translate to NBD_CMD_FLUSH commands. FUA support is not included in this patch because all free software servers implement it with a full fdatasync; thus it has no advantage over supporting flush only. Because I [Paolo] cannot really benchmark it in a realistic scenario, I cannot tell if it is a good idea or not. It is also not clear if it is valid for an NBD server to support FUA but not flush. The Linux block layer gives a warning for this combination, the NBD protocol documentation says nothing about it. The patch also fixes a small problem in the handling of flags: nbd->flags must be cleared at the end of NBD_DO_IT, but the driver was not doing that. The bug manifests itself as follows. Suppose you two different client/server pairs to start the NBD device. Suppose also that the first client supports NBD_SET_FLAGS, and the first server sends NBD_FLAG_SEND_FLUSH; the second pair instead does neither of these two things. Before this patch, the second invocation of NBD_DO_IT will use a stale value of nbd->flags, and the second server will issue an error every time it receives an NBD_CMD_FLUSH command. This bug is pre-existing, but it becomes much more important after this patch; flush failures make the device pretty much unusable, unlike Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bligh <alex@alex.org.uk> Acked-by: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:05:23 +00:00
}
req->errors = 0;
nsock = nbd->socks[index];
mutex_lock(&nsock->tx_lock);
if (unlikely(!nsock->sock)) {
mutex_unlock(&nsock->tx_lock);
dev_err_ratelimited(disk_to_dev(nbd->disk),
"Attempted send on closed socket\n");
goto error_out;
}
if (nbd_send_cmd(nbd, cmd, index) != 0) {
dev_err_ratelimited(disk_to_dev(nbd->disk),
"Request send failed\n");
req->errors++;
nbd_end_request(cmd);
}
mutex_unlock(&nsock->tx_lock);
return;
error_out:
req->errors++;
nbd_end_request(cmd);
}
static int nbd_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
struct nbd_cmd *cmd = blk_mq_rq_to_pdu(bd->rq);
/*
* Since we look at the bio's to send the request over the network we
* need to make sure the completion work doesn't mark this request done
* before we are done doing our send. This keeps us from dereferencing
* freed data if we have particularly fast completions (ie we get the
* completion before we exit sock_xmit on the last bvec) or in the case
* that the server is misbehaving (or there was an error) before we're
* done sending everything over the wire.
*/
init_completion(&cmd->send_complete);
blk_mq_start_request(bd->rq);
nbd_handle_cmd(cmd, hctx->queue_num);
complete(&cmd->send_complete);
return BLK_MQ_RQ_QUEUE_OK;
}
static int nbd_add_socket(struct nbd_device *nbd, struct socket *sock)
{
struct nbd_sock **socks;
struct nbd_sock *nsock;
if (!nbd->task_setup)
nbd->task_setup = current;
if (nbd->task_setup != current) {
dev_err(disk_to_dev(nbd->disk),
"Device being setup by another task");
return -EINVAL;
}
socks = krealloc(nbd->socks, (nbd->num_connections + 1) *
sizeof(struct nbd_sock *), GFP_KERNEL);
if (!socks)
return -ENOMEM;
nsock = kzalloc(sizeof(struct nbd_sock), GFP_KERNEL);
if (!nsock)
return -ENOMEM;
nbd->socks = socks;
mutex_init(&nsock->tx_lock);
nsock->sock = sock;
socks[nbd->num_connections++] = nsock;
return 0;
}
/* Reset all properties of an NBD device */
static void nbd_reset(struct nbd_device *nbd)
{
int i;
for (i = 0; i < nbd->num_connections; i++)
kfree(nbd->socks[i]);
kfree(nbd->socks);
nbd->socks = NULL;
nbd->runtime_flags = 0;
nbd->blksize = 1024;
nbd->bytesize = 0;
set_capacity(nbd->disk, 0);
nbd->flags = 0;
nbd->tag_set.timeout = 0;
nbd->num_connections = 0;
nbd->task_setup = NULL;
queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, nbd->disk->queue);
}
static void nbd_bdev_reset(struct block_device *bdev)
{
set_device_ro(bdev, false);
bdev->bd_inode->i_size = 0;
if (max_part > 0) {
blkdev_reread_part(bdev);
bdev->bd_invalidated = 1;
}
}
static void nbd_parse_flags(struct nbd_device *nbd, struct block_device *bdev)
{
if (nbd->flags & NBD_FLAG_READ_ONLY)
set_device_ro(bdev, true);
if (nbd->flags & NBD_FLAG_SEND_TRIM)
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, nbd->disk->queue);
if (nbd->flags & NBD_FLAG_SEND_FLUSH)
blk_queue_write_cache(nbd->disk->queue, true, false);
else
blk_queue_write_cache(nbd->disk->queue, false, false);
}
static void send_disconnects(struct nbd_device *nbd)
{
struct nbd_request request = {};
int i, ret;
request.magic = htonl(NBD_REQUEST_MAGIC);
request.type = htonl(NBD_CMD_DISC);
for (i = 0; i < nbd->num_connections; i++) {
ret = sock_xmit(nbd, i, 1, &request, sizeof(request), 0);
if (ret <= 0)
dev_err(disk_to_dev(nbd->disk),
"Send disconnect failed %d\n", ret);
}
}
static int nbd_dev_dbg_init(struct nbd_device *nbd);
static void nbd_dev_dbg_close(struct nbd_device *nbd);
/* Must be called with config_lock held */
static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case NBD_DISCONNECT: {
dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n");
if (!nbd->socks)
return -EINVAL;
mutex_unlock(&nbd->config_lock);
fsync_bdev(bdev);
mutex_lock(&nbd->config_lock);
/* Check again after getting mutex back. */
if (!nbd->socks)
return -EINVAL;
if (!test_and_set_bit(NBD_DISCONNECT_REQUESTED,
&nbd->runtime_flags))
send_disconnects(nbd);
return 0;
}
case NBD_CLEAR_SOCK:
sock_shutdown(nbd);
nbd_clear_que(nbd);
kill_bdev(bdev);
nbd_bdev_reset(bdev);
/*
* We want to give the run thread a chance to wait for everybody
* to clean up and then do it's own cleanup.
*/
if (!test_bit(NBD_RUNNING, &nbd->runtime_flags)) {
int i;
for (i = 0; i < nbd->num_connections; i++)
kfree(nbd->socks[i]);
kfree(nbd->socks);
nbd->socks = NULL;
nbd->num_connections = 0;
nbd->task_setup = NULL;
}
return 0;
case NBD_SET_SOCK: {
int err;
struct socket *sock = sockfd_lookup(arg, &err);
if (!sock)
return err;
err = nbd_add_socket(nbd, sock);
if (!err && max_part)
bdev->bd_invalidated = 1;
return err;
}
case NBD_SET_BLKSIZE: {
loff_t bsize = div_s64(nbd->bytesize, arg);
return nbd_size_set(nbd, bdev, arg, bsize);
}
case NBD_SET_SIZE:
return nbd_size_set(nbd, bdev, nbd->blksize,
div_s64(arg, nbd->blksize));
case NBD_SET_SIZE_BLOCKS:
return nbd_size_set(nbd, bdev, nbd->blksize, arg);
case NBD_SET_TIMEOUT:
nbd->tag_set.timeout = arg * HZ;
return 0;
case NBD_SET_FLAGS:
nbd->flags = arg;
return 0;
case NBD_DO_IT: {
struct recv_thread_args *args;
int num_connections = nbd->num_connections;
int error = 0, i;
if (nbd->task_recv)
return -EBUSY;
if (!nbd->socks)
return -EINVAL;
if (num_connections > 1 &&
!(nbd->flags & NBD_FLAG_CAN_MULTI_CONN)) {
dev_err(disk_to_dev(nbd->disk), "server does not support multiple connections per device.\n");
error = -EINVAL;
goto out_err;
}
set_bit(NBD_RUNNING, &nbd->runtime_flags);
blk_mq_update_nr_hw_queues(&nbd->tag_set, nbd->num_connections);
args = kcalloc(num_connections, sizeof(*args), GFP_KERNEL);
if (!args) {
error = -ENOMEM;
goto out_err;
}
nbd: fix race in ioctl Quentin ran into this bug: WARNING: CPU: 64 PID: 10085 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x65/0x80 sysfs: cannot create duplicate filename '/devices/virtual/block/nbd3/pid' Modules linked in: nbd CPU: 64 PID: 10085 Comm: qemu-nbd Tainted: G D 4.6.0+ #7 0000000000000000 ffff8820330bba68 ffffffff814b8791 ffff8820330bbac8 0000000000000000 ffff8820330bbab8 ffffffff810d04ab ffff8820330bbaa8 0000001f00000296 0000000000017681 ffff8810380bf000 ffffffffa0001790 Call Trace: [<ffffffff814b8791>] dump_stack+0x4d/0x6c [<ffffffff810d04ab>] __warn+0xdb/0x100 [<ffffffff810d0574>] warn_slowpath_fmt+0x44/0x50 [<ffffffff81218c65>] sysfs_warn_dup+0x65/0x80 [<ffffffff81218a02>] sysfs_add_file_mode_ns+0x172/0x180 [<ffffffff81218a35>] sysfs_create_file_ns+0x25/0x30 [<ffffffff81594a76>] device_create_file+0x36/0x90 [<ffffffffa0000e8d>] __nbd_ioctl+0x32d/0x9b0 [nbd] [<ffffffff814cc8e8>] ? find_next_bit+0x18/0x20 [<ffffffff810f7c29>] ? select_idle_sibling+0xe9/0x120 [<ffffffff810f6cd7>] ? __enqueue_entity+0x67/0x70 [<ffffffff810f9bf0>] ? enqueue_task_fair+0x630/0xe20 [<ffffffff810efa76>] ? resched_curr+0x36/0x70 [<ffffffff810f0078>] ? check_preempt_curr+0x78/0x90 [<ffffffff810f00a2>] ? ttwu_do_wakeup+0x12/0x80 [<ffffffff810f01b1>] ? ttwu_do_activate.constprop.86+0x61/0x70 [<ffffffff810f0c15>] ? try_to_wake_up+0x185/0x2d0 [<ffffffff810f0d6d>] ? default_wake_function+0xd/0x10 [<ffffffff81105471>] ? autoremove_wake_function+0x11/0x40 [<ffffffffa0001577>] nbd_ioctl+0x67/0x94 [nbd] [<ffffffff814ac0fd>] blkdev_ioctl+0x14d/0x940 [<ffffffff811b0da2>] ? put_pipe_info+0x22/0x60 [<ffffffff811d96cc>] block_ioctl+0x3c/0x40 [<ffffffff811ba08d>] do_vfs_ioctl+0x8d/0x5e0 [<ffffffff811aa329>] ? ____fput+0x9/0x10 [<ffffffff810e9092>] ? task_work_run+0x72/0x90 [<ffffffff811ba627>] SyS_ioctl+0x47/0x80 [<ffffffff8185f5df>] entry_SYSCALL_64_fastpath+0x17/0x93 ---[ end trace 7899b295e4f850c8 ]--- It seems fairly obvious that device_create_file() is not being protected from being run concurrently on the same nbd. Quentin found the following relevant commits: 1a2ad21 nbd: add locking to nbd_ioctl 90b8f28 [PATCH] end of methods switch: remove the old ones d4430d6 [PATCH] beginning of methods conversion 08f8585 [PATCH] move block_device_operations to blkdev.h It would seem that the race was introduced in the process of moving nbd from BKL to unlocked ioctls. By setting nbd->task_recv while the mutex is held, we can prevent other processes from running concurrently (since nbd->task_recv is also checked while the mutex is held). Reported-and-tested-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pavel Machek <pavel@suse.cz> Cc: Jens Axboe <axboe@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-27 10:59:35 +00:00
nbd->task_recv = current;
mutex_unlock(&nbd->config_lock);
nbd_parse_flags(nbd, bdev);
error = device_create_file(disk_to_dev(nbd->disk), &pid_attr);
if (error) {
dev_err(disk_to_dev(nbd->disk), "device_create_file failed!\n");
goto out_recv;
}
nbd_size_update(nbd, bdev);
nbd_dev_dbg_init(nbd);
for (i = 0; i < num_connections; i++) {
sk_set_memalloc(nbd->socks[i]->sock->sk);
atomic_inc(&nbd->recv_threads);
INIT_WORK(&args[i].work, recv_work);
args[i].nbd = nbd;
args[i].index = i;
queue_work(system_long_wq, &args[i].work);
}
wait_event_interruptible(nbd->recv_wq,
atomic_read(&nbd->recv_threads) == 0);
for (i = 0; i < num_connections; i++)
flush_work(&args[i].work);
nbd_dev_dbg_close(nbd);
nbd_size_clear(nbd, bdev);
device_remove_file(disk_to_dev(nbd->disk), &pid_attr);
out_recv:
mutex_lock(&nbd->config_lock);
nbd: fix race in ioctl Quentin ran into this bug: WARNING: CPU: 64 PID: 10085 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x65/0x80 sysfs: cannot create duplicate filename '/devices/virtual/block/nbd3/pid' Modules linked in: nbd CPU: 64 PID: 10085 Comm: qemu-nbd Tainted: G D 4.6.0+ #7 0000000000000000 ffff8820330bba68 ffffffff814b8791 ffff8820330bbac8 0000000000000000 ffff8820330bbab8 ffffffff810d04ab ffff8820330bbaa8 0000001f00000296 0000000000017681 ffff8810380bf000 ffffffffa0001790 Call Trace: [<ffffffff814b8791>] dump_stack+0x4d/0x6c [<ffffffff810d04ab>] __warn+0xdb/0x100 [<ffffffff810d0574>] warn_slowpath_fmt+0x44/0x50 [<ffffffff81218c65>] sysfs_warn_dup+0x65/0x80 [<ffffffff81218a02>] sysfs_add_file_mode_ns+0x172/0x180 [<ffffffff81218a35>] sysfs_create_file_ns+0x25/0x30 [<ffffffff81594a76>] device_create_file+0x36/0x90 [<ffffffffa0000e8d>] __nbd_ioctl+0x32d/0x9b0 [nbd] [<ffffffff814cc8e8>] ? find_next_bit+0x18/0x20 [<ffffffff810f7c29>] ? select_idle_sibling+0xe9/0x120 [<ffffffff810f6cd7>] ? __enqueue_entity+0x67/0x70 [<ffffffff810f9bf0>] ? enqueue_task_fair+0x630/0xe20 [<ffffffff810efa76>] ? resched_curr+0x36/0x70 [<ffffffff810f0078>] ? check_preempt_curr+0x78/0x90 [<ffffffff810f00a2>] ? ttwu_do_wakeup+0x12/0x80 [<ffffffff810f01b1>] ? ttwu_do_activate.constprop.86+0x61/0x70 [<ffffffff810f0c15>] ? try_to_wake_up+0x185/0x2d0 [<ffffffff810f0d6d>] ? default_wake_function+0xd/0x10 [<ffffffff81105471>] ? autoremove_wake_function+0x11/0x40 [<ffffffffa0001577>] nbd_ioctl+0x67/0x94 [nbd] [<ffffffff814ac0fd>] blkdev_ioctl+0x14d/0x940 [<ffffffff811b0da2>] ? put_pipe_info+0x22/0x60 [<ffffffff811d96cc>] block_ioctl+0x3c/0x40 [<ffffffff811ba08d>] do_vfs_ioctl+0x8d/0x5e0 [<ffffffff811aa329>] ? ____fput+0x9/0x10 [<ffffffff810e9092>] ? task_work_run+0x72/0x90 [<ffffffff811ba627>] SyS_ioctl+0x47/0x80 [<ffffffff8185f5df>] entry_SYSCALL_64_fastpath+0x17/0x93 ---[ end trace 7899b295e4f850c8 ]--- It seems fairly obvious that device_create_file() is not being protected from being run concurrently on the same nbd. Quentin found the following relevant commits: 1a2ad21 nbd: add locking to nbd_ioctl 90b8f28 [PATCH] end of methods switch: remove the old ones d4430d6 [PATCH] beginning of methods conversion 08f8585 [PATCH] move block_device_operations to blkdev.h It would seem that the race was introduced in the process of moving nbd from BKL to unlocked ioctls. By setting nbd->task_recv while the mutex is held, we can prevent other processes from running concurrently (since nbd->task_recv is also checked while the mutex is held). Reported-and-tested-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pavel Machek <pavel@suse.cz> Cc: Jens Axboe <axboe@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-27 10:59:35 +00:00
nbd->task_recv = NULL;
out_err:
sock_shutdown(nbd);
nbd_clear_que(nbd);
kill_bdev(bdev);
nbd_bdev_reset(bdev);
/* user requested, ignore socket errors */
if (test_bit(NBD_DISCONNECT_REQUESTED, &nbd->runtime_flags))
error = 0;
if (test_bit(NBD_TIMEDOUT, &nbd->runtime_flags))
error = -ETIMEDOUT;
nbd_reset(nbd);
return error;
}
case NBD_CLEAR_QUE:
[PATCH] nbd: fix TX/RX race condition Janos Haar of First NetCenter Bt. reported numerous crashes involving the NBD driver. With his help, this was tracked down to bogus bio vectors which in turn was the result of a race condition between the receive/transmit routines in the NBD driver. The bug manifests itself like this: CPU0 CPU1 do_nbd_request add req to queuelist nbd_send_request send req head for each bio kmap send nbd_read_stat nbd_find_request nbd_end_request kunmap When CPU1 finishes nbd_end_request, the request and all its associated bio's are freed. So when CPU0 calls kunmap whose argument is derived from the last bio, it may crash. Under normal circumstances, the race occurs only on the last bio. However, if an error is encountered on the remote NBD server (such as an incorrect magic number in the request), or if there were a bug in the server, it is possible for the nbd_end_request to occur any time after the request's addition to the queuelist. The following patch fixes this problem by making sure that requests are not added to the queuelist until after they have been completed transmission. In order for the receiving side to be ready for responses involving requests still being transmitted, the patch introduces the concept of the active request. When a response matches the current active request, its processing is delayed until after the tranmission has come to a stop. This has been tested by Janos and it has been successful in curing this race condition. From: Herbert Xu <herbert@gondor.apana.org.au> Here is an updated patch which removes the active_req wait in nbd_clear_queue and the associated memory barrier. I've also clarified this in the comment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: <djani22@dynamicweb.hu> Cc: Paul Clements <Paul.Clements@SteelEye.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:09:47 +00:00
/*
* This is for compatibility only. The queue is always cleared
* by NBD_DO_IT or NBD_CLEAR_SOCK.
*/
return 0;
case NBD_PRINT_DEBUG:
/*
* For compatibility only, we no longer keep a list of
* outstanding requests.
*/
return 0;
}
return -ENOTTY;
}
static int nbd_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct nbd_device *nbd = bdev->bd_disk->private_data;
int error;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
BUG_ON(nbd->magic != NBD_MAGIC);
mutex_lock(&nbd->config_lock);
error = __nbd_ioctl(bdev, nbd, cmd, arg);
mutex_unlock(&nbd->config_lock);
return error;
}
static const struct block_device_operations nbd_fops =
{
.owner = THIS_MODULE,
.ioctl = nbd_ioctl,
.compat_ioctl = nbd_ioctl,
};
#if IS_ENABLED(CONFIG_DEBUG_FS)
static int nbd_dbg_tasks_show(struct seq_file *s, void *unused)
{
struct nbd_device *nbd = s->private;
if (nbd->task_recv)
seq_printf(s, "recv: %d\n", task_pid_nr(nbd->task_recv));
return 0;
}
static int nbd_dbg_tasks_open(struct inode *inode, struct file *file)
{
return single_open(file, nbd_dbg_tasks_show, inode->i_private);
}
static const struct file_operations nbd_dbg_tasks_ops = {
.open = nbd_dbg_tasks_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int nbd_dbg_flags_show(struct seq_file *s, void *unused)
{
struct nbd_device *nbd = s->private;
u32 flags = nbd->flags;
seq_printf(s, "Hex: 0x%08x\n\n", flags);
seq_puts(s, "Known flags:\n");
if (flags & NBD_FLAG_HAS_FLAGS)
seq_puts(s, "NBD_FLAG_HAS_FLAGS\n");
if (flags & NBD_FLAG_READ_ONLY)
seq_puts(s, "NBD_FLAG_READ_ONLY\n");
if (flags & NBD_FLAG_SEND_FLUSH)
seq_puts(s, "NBD_FLAG_SEND_FLUSH\n");
if (flags & NBD_FLAG_SEND_TRIM)
seq_puts(s, "NBD_FLAG_SEND_TRIM\n");
return 0;
}
static int nbd_dbg_flags_open(struct inode *inode, struct file *file)
{
return single_open(file, nbd_dbg_flags_show, inode->i_private);
}
static const struct file_operations nbd_dbg_flags_ops = {
.open = nbd_dbg_flags_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int nbd_dev_dbg_init(struct nbd_device *nbd)
{
struct dentry *dir;
if (!nbd_dbg_dir)
return -EIO;
dir = debugfs_create_dir(nbd_name(nbd), nbd_dbg_dir);
if (!dir) {
dev_err(nbd_to_dev(nbd), "Failed to create debugfs dir for '%s'\n",
nbd_name(nbd));
return -EIO;
}
nbd->dbg_dir = dir;
debugfs_create_file("tasks", 0444, dir, nbd, &nbd_dbg_tasks_ops);
debugfs_create_u64("size_bytes", 0444, dir, &nbd->bytesize);
debugfs_create_u32("timeout", 0444, dir, &nbd->tag_set.timeout);
debugfs_create_u64("blocksize", 0444, dir, &nbd->blksize);
debugfs_create_file("flags", 0444, dir, nbd, &nbd_dbg_flags_ops);
return 0;
}
static void nbd_dev_dbg_close(struct nbd_device *nbd)
{
debugfs_remove_recursive(nbd->dbg_dir);
}
static int nbd_dbg_init(void)
{
struct dentry *dbg_dir;
dbg_dir = debugfs_create_dir("nbd", NULL);
if (!dbg_dir)
return -EIO;
nbd_dbg_dir = dbg_dir;
return 0;
}
static void nbd_dbg_close(void)
{
debugfs_remove_recursive(nbd_dbg_dir);
}
#else /* IS_ENABLED(CONFIG_DEBUG_FS) */
static int nbd_dev_dbg_init(struct nbd_device *nbd)
{
return 0;
}
static void nbd_dev_dbg_close(struct nbd_device *nbd)
{
}
static int nbd_dbg_init(void)
{
return 0;
}
static void nbd_dbg_close(void)
{
}
#endif
static int nbd_init_request(void *data, struct request *rq,
unsigned int hctx_idx, unsigned int request_idx,
unsigned int numa_node)
{
struct nbd_cmd *cmd = blk_mq_rq_to_pdu(rq);
cmd->nbd = data;
return 0;
}
static struct blk_mq_ops nbd_mq_ops = {
.queue_rq = nbd_queue_rq,
.init_request = nbd_init_request,
.timeout = nbd_xmit_timeout,
};
/*
* And here should be modules and kernel interface
* (Just smiley confuses emacs :-)
*/
static int __init nbd_init(void)
{
int err = -ENOMEM;
int i;
NBD: add partition support Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:51 +00:00
int part_shift;
BUILD_BUG_ON(sizeof(struct nbd_request) != 28);
NBD: add partition support Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:51 +00:00
if (max_part < 0) {
printk(KERN_ERR "nbd: max_part must be >= 0\n");
NBD: add partition support Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:51 +00:00
return -EINVAL;
}
part_shift = 0;
if (max_part > 0) {
NBD: add partition support Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:51 +00:00
part_shift = fls(max_part);
/*
* Adjust max_part according to part_shift as it is exported
* to user space so that user can know the max number of
* partition kernel should be able to manage.
*
* Note that -1 is required because partition 0 is reserved
* for the whole disk.
*/
max_part = (1UL << part_shift) - 1;
}
nbd: limit module parameters to a sane value The 'max_part' parameter controls the number of maximum partition a nbd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel oops (or, at least, produce invalid device nodes in some cases). In addition, specifying large 'nbds_max' value causes same problem for the same reason. On my desktop, following command results to the kernel bug: $ sudo modprobe nbd max_part=100000 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/block/nbd4/range CPU 1 Modules linked in: nbd(+) bridge stp llc kvm_intel kvm asus_atk0110 sg sr_mod cdrom Pid: 2522, comm: modprobe Tainted: G W 2.6.39-leonard+ #159 System manufacturer System Product Name/P5G41TD-M PRO RIP: 0010:[<ffffffff8115aa08>] [<ffffffff8115aa08>] internal_create_group+0x2f/0x166 RSP: 0018:ffff8801009f1de8 EFLAGS: 00010246 RAX: 00000000ffffffef RBX: ffff880103920478 RCX: 00000000000a7bd3 RDX: ffffffff81a2dbe0 RSI: 0000000000000000 RDI: ffff880103920478 RBP: ffff8801009f1e38 R08: ffff880103920468 R09: ffff880103920478 R10: ffff8801009f1de8 R11: ffff88011eccbb68 R12: ffffffff81a2dbe0 R13: ffff880103920468 R14: 0000000000000000 R15: ffff880103920400 FS: 00007f3c49de9700(0000) GS:ffff88011f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f3b7fe7c000 CR3: 00000000cd58d000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2522, threadinfo ffff8801009f0000, task ffff8801009a93a0) Stack: ffff8801009f1e58 ffffffff812e8f6e ffff8801009f1e58 ffffffff812e7a80 ffff880000000010 ffff880103920400 ffff8801002fd0c0 ffff880103920468 0000000000000011 ffff880103920400 ffff8801009f1e48 ffffffff8115ab6a Call Trace: [<ffffffff812e8f6e>] ? device_add+0x4f1/0x5e4 [<ffffffff812e7a80>] ? dev_set_name+0x41/0x43 [<ffffffff8115ab6a>] sysfs_create_group+0x13/0x15 [<ffffffff810b857e>] blk_trace_init_sysfs+0x14/0x16 [<ffffffff811ee58b>] blk_register_queue+0x4c/0xfd [<ffffffff811f3bdf>] add_disk+0xe4/0x29c [<ffffffffa007e2ab>] nbd_init+0x2ab/0x30d [nbd] [<ffffffffa007e000>] ? 0xffffffffa007dfff [<ffffffff8100020f>] do_one_initcall+0x7f/0x13e [<ffffffff8107ab0a>] sys_init_module+0xa1/0x1e3 [<ffffffff814f3542>] system_call_fastpath+0x16/0x1b Code: 41 57 41 56 41 55 41 54 53 48 83 ec 28 0f 1f 44 00 00 48 89 fb 41 89 f6 49 89 d4 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 09 01 00 00 49 RIP [<ffffffff8115aa08>] internal_create_group+0x2f/0x166 RSP <ffff8801009f1de8> ---[ end trace 753285ffbf72c57c ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-28 12:44:46 +00:00
if ((1UL << part_shift) > DISK_MAX_PARTS)
return -EINVAL;
if (nbds_max > 1UL << (MINORBITS - part_shift))
return -EINVAL;
nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
if (!nbd_dev)
return -ENOMEM;
for (i = 0; i < nbds_max; i++) {
NBD: add partition support Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:51 +00:00
struct gendisk *disk = alloc_disk(1 << part_shift);
if (!disk)
goto out;
nbd_dev[i].disk = disk;
nbd_dev[i].tag_set.ops = &nbd_mq_ops;
nbd_dev[i].tag_set.nr_hw_queues = 1;
nbd_dev[i].tag_set.queue_depth = 128;
nbd_dev[i].tag_set.numa_node = NUMA_NO_NODE;
nbd_dev[i].tag_set.cmd_size = sizeof(struct nbd_cmd);
nbd_dev[i].tag_set.flags = BLK_MQ_F_SHOULD_MERGE |
BLK_MQ_F_SG_MERGE | BLK_MQ_F_BLOCKING;
nbd_dev[i].tag_set.driver_data = &nbd_dev[i];
err = blk_mq_alloc_tag_set(&nbd_dev[i].tag_set);
if (err) {
put_disk(disk);
goto out;
}
/*
* The new linux 2.5 block layer implementation requires
* every gendisk to have its very own request_queue struct.
* These structs are big so we dynamically allocate them.
*/
disk->queue = blk_mq_init_queue(&nbd_dev[i].tag_set);
if (!disk->queue) {
blk_mq_free_tag_set(&nbd_dev[i].tag_set);
put_disk(disk);
goto out;
}
/*
* Tell the block layer that we are not a rotational device
*/
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, disk->queue);
queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, disk->queue);
disk->queue->limits.discard_granularity = 512;
blk_queue_max_discard_sectors(disk->queue, UINT_MAX);
disk->queue->limits.discard_zeroes_data = 0;
blk_queue_max_hw_sectors(disk->queue, 65536);
disk->queue->limits.max_sectors = 256;
}
if (register_blkdev(NBD_MAJOR, "nbd")) {
err = -EIO;
goto out;
}
printk(KERN_INFO "nbd: registered device at major %d\n", NBD_MAJOR);
nbd_dbg_init();
for (i = 0; i < nbds_max; i++) {
struct gendisk *disk = nbd_dev[i].disk;
nbd_dev[i].magic = NBD_MAGIC;
mutex_init(&nbd_dev[i].config_lock);
disk->major = NBD_MAJOR;
NBD: add partition support Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:51 +00:00
disk->first_minor = i << part_shift;
disk->fops = &nbd_fops;
disk->private_data = &nbd_dev[i];
sprintf(disk->disk_name, "nbd%d", i);
init_waitqueue_head(&nbd_dev[i].recv_wq);
nbd_reset(&nbd_dev[i]);
add_disk(disk);
}
return 0;
out:
while (i--) {
blk_mq_free_tag_set(&nbd_dev[i].tag_set);
blk_cleanup_queue(nbd_dev[i].disk->queue);
put_disk(nbd_dev[i].disk);
}
kfree(nbd_dev);
return err;
}
static void __exit nbd_cleanup(void)
{
int i;
nbd_dbg_close();
for (i = 0; i < nbds_max; i++) {
struct gendisk *disk = nbd_dev[i].disk;
nbd_dev[i].magic = 0;
if (disk) {
del_gendisk(disk);
blk_cleanup_queue(disk->queue);
blk_mq_free_tag_set(&nbd_dev[i].tag_set);
put_disk(disk);
}
}
unregister_blkdev(NBD_MAJOR, "nbd");
kfree(nbd_dev);
printk(KERN_INFO "nbd: unregistered device at major %d\n", NBD_MAJOR);
}
module_init(nbd_init);
module_exit(nbd_cleanup);
MODULE_DESCRIPTION("Network Block Device");
MODULE_LICENSE("GPL");
module_param(nbds_max, int, 0444);
NBD: add partition support Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:02:51 +00:00
MODULE_PARM_DESC(nbds_max, "number of network block devices to initialize (default: 16)");
module_param(max_part, int, 0444);
MODULE_PARM_DESC(max_part, "number of partitions per device (default: 0)");