linux/sound/soc/generic/audio-graph-card2.c

1298 lines
28 KiB
C
Raw Normal View History

2021-10-12 04:54:46 +00:00
// SPDX-License-Identifier: GPL-2.0
//
// ASoC Audio Graph Card2 support
//
// Copyright (C) 2020 Renesas Electronics Corp.
// Copyright (C) 2020 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
//
// based on ${LINUX}/sound/soc/generic/audio-graph-card.c
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/of_graph.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <sound/graph_card.h>
/************************************
daifmt
************************************
ports {
format = "left_j";
port@0 {
bitclock-master;
sample0: endpoint@0 {
frame-master;
};
sample1: endpoint@1 {
format = "i2s";
};
};
...
};
You can set daifmt at ports/port/endpoint.
It uses *latest* format, and *share* master settings.
In above case,
sample0: left_j, bitclock-master, frame-master
sample1: i2s, bitclock-master
If there was no settings, *Codec* will be
bitclock/frame provider as default.
see
graph_parse_daifmt().
************************************
Normal Audio-Graph
************************************
CPU <---> Codec
sound {
compatible = "audio-graph-card2";
links = <&cpu>;
};
CPU {
cpu: port {
bitclock-master;
frame-master;
cpu_ep: endpoint { remote-endpoint = <&codec_ep>; }; };
};
Codec {
port { codec_ep: endpoint { remote-endpoint = <&cpu_ep>; }; };
};
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
************************************
Multi-CPU/Codec
************************************
It has connection part (= X) and list part (= y).
links indicates connection part of CPU side (= A).
+-+ (A) +-+
CPU1 --(y) | | <-(X)--(X)-> | | (y)-- Codec1
CPU2 --(y) | | | | (y)-- Codec2
+-+ +-+
sound {
compatible = "audio-graph-card2";
(A) links = <&mcpu>;
multi {
ports@0 {
(X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; };
(y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; };
(y) port@2 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; };
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
};
ports@1 {
(X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; };
(y) port@1 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; };
(y) port@2 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; };
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
};
};
};
CPU {
ports {
bitclock-master;
frame-master;
port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; };
port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; };
};
};
Codec {
ports {
port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; };
port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; };
};
};
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
************************************
DPCM
************************************
DSP
************
PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset
PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers
PCM2 <--> * fe2 be2 * <--> DAI2: MODEM
PCM3 <--> * fe3 be3 * <--> DAI3: BT
* be4 * <--> DAI4: DMIC
* be5 * <--> DAI5: FM
************
sound {
compatible = "audio-graph-card2";
// indicate routing
routing = "xxx Playback", "xxx Playback",
"xxx Playback", "xxx Playback",
"xxx Playback", "xxx Playback";
// indicate all Front-End, Back-End
links = <&fe0, &fe1, ...,
&be0, &be1, ...>;
dpcm {
// Front-End
ports@0 {
fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; };
fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; };
...
};
// Back-End
ports@1 {
be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; };
be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; };
...
};
};
};
CPU {
ports {
bitclock-master;
frame-master;
port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; };
port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; };
...
};
};
Codec {
ports {
port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; };
port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; };
...
};
};
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
************************************
Codec to Codec
************************************
+--+
| |<-- Codec0 <- IN
| |--> Codec1 -> OUT
+--+
sound {
compatible = "audio-graph-card2";
routing = "OUT" ,"DAI1 Playback",
"DAI0 Capture", "IN";
links = <&c2c>;
codec2codec {
ports {
rate = <48000>;
c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; };
port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; };
};
};
Codec {
ports {
port@0 {
bitclock-master;
frame-master;
codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; };
port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; };
};
};
2021-10-12 04:54:46 +00:00
*/
enum graph_type {
GRAPH_NORMAL,
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
GRAPH_DPCM,
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
GRAPH_C2C,
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
GRAPH_MULTI, /* don't use ! Use this only in __graph_get_type() */
2021-10-12 04:54:46 +00:00
};
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
#define GRAPH_NODENAME_MULTI "multi"
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
#define GRAPH_NODENAME_DPCM "dpcm"
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
#define GRAPH_NODENAME_C2C "codec2codec"
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
2021-10-12 04:54:46 +00:00
#define port_to_endpoint(port) of_get_child_by_name(port, "endpoint")
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
static enum graph_type __graph_get_type(struct device_node *lnk)
{
struct device_node *np;
/*
* target {
* ports {
* => lnk: port@0 { ... };
* port@1 { ... };
* };
* };
*/
np = of_get_parent(lnk);
if (of_node_name_eq(np, "ports"))
np = of_get_parent(np);
if (of_node_name_eq(np, GRAPH_NODENAME_MULTI))
return GRAPH_MULTI;
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
if (of_node_name_eq(np, GRAPH_NODENAME_DPCM))
return GRAPH_DPCM;
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
if (of_node_name_eq(np, GRAPH_NODENAME_C2C))
return GRAPH_C2C;
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
return GRAPH_NORMAL;
}
2021-10-12 04:54:46 +00:00
static enum graph_type graph_get_type(struct asoc_simple_priv *priv,
struct device_node *lnk)
{
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
enum graph_type type = __graph_get_type(lnk);
/* GRAPH_MULTI here means GRAPH_NORMAL */
if (type == GRAPH_MULTI)
type = GRAPH_NORMAL;
2021-10-12 04:54:46 +00:00
#ifdef DEBUG
{
struct device *dev = simple_priv_to_dev(priv);
const char *str = "Normal";
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
switch (type) {
case GRAPH_DPCM:
if (asoc_graph_is_ports0(lnk))
str = "DPCM Front-End";
else
str = "DPCM Back-End";
break;
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
case GRAPH_C2C:
str = "Codec2Codec";
break;
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
default:
break;
}
2021-10-12 04:54:46 +00:00
dev_dbg(dev, "%pOF (%s)", lnk, str);
}
#endif
return type;
}
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
static int graph_lnk_is_multi(struct device_node *lnk)
{
return __graph_get_type(lnk) == GRAPH_MULTI;
}
static struct device_node *graph_get_next_multi_ep(struct device_node **port)
{
struct device_node *ports = of_get_parent(*port);
struct device_node *ep = NULL;
struct device_node *rep = NULL;
/*
* multi {
* ports {
* => lnk: port@0 { ... };
* port@1 { ep { ... = rep0 } };
* port@2 { ep { ... = rep1 } };
* ...
* };
* };
*
* xxx {
* port@0 { rep0 };
* port@1 { rep1 };
* };
*/
do {
*port = of_get_next_child(ports, *port);
if (!*port)
break;
} while (!of_node_name_eq(*port, "port"));
if (*port) {
ep = port_to_endpoint(*port);
rep = of_graph_get_remote_endpoint(ep);
}
of_node_put(ep);
of_node_put(ports);
return rep;
}
2021-10-12 04:54:46 +00:00
static const struct snd_soc_ops graph_ops = {
.startup = asoc_simple_startup,
.shutdown = asoc_simple_shutdown,
.hw_params = asoc_simple_hw_params,
};
static int graph_get_dai_id(struct device_node *ep)
{
struct device_node *node;
struct device_node *endpoint;
struct of_endpoint info;
int i, id;
const u32 *reg;
int ret;
/* use driver specified DAI ID if exist */
ret = snd_soc_get_dai_id(ep);
if (ret != -ENOTSUPP)
return ret;
/* use endpoint/port reg if exist */
ret = of_graph_parse_endpoint(ep, &info);
if (ret == 0) {
/*
* Because it will count port/endpoint if it doesn't have "reg".
* But, we can't judge whether it has "no reg", or "reg = <0>"
* only of_graph_parse_endpoint().
* We need to check "reg" property
*/
if (of_get_property(ep, "reg", NULL))
return info.id;
node = of_get_parent(ep);
reg = of_get_property(node, "reg", NULL);
of_node_put(node);
if (reg)
return info.port;
}
node = of_graph_get_port_parent(ep);
/*
* Non HDMI sound case, counting port/endpoint on its DT
* is enough. Let's count it.
*/
i = 0;
id = -1;
for_each_endpoint_of_node(node, endpoint) {
if (endpoint == ep)
id = i;
i++;
}
of_node_put(node);
if (id < 0)
return -ENODEV;
return id;
}
static int asoc_simple_parse_dai(struct device_node *ep,
struct snd_soc_dai_link_component *dlc,
int *is_single_link)
{
struct device_node *node;
struct of_phandle_args args;
int ret;
if (!ep)
return 0;
node = of_graph_get_port_parent(ep);
/* Get dai->name */
args.np = node;
args.args[0] = graph_get_dai_id(ep);
args.args_count = (of_graph_get_endpoint_count(node) > 1);
/*
* FIXME
*
* Here, dlc->dai_name is pointer to CPU/Codec DAI name.
* If user unbinded CPU or Codec driver, but not for Sound Card,
* dlc->dai_name is keeping unbinded CPU or Codec
* driver's pointer.
*
* If user re-bind CPU or Codec driver again, ALSA SoC will try
* to rebind Card via snd_soc_try_rebind_card(), but because of
* above reason, it might can't bind Sound Card.
* Because Sound Card is pointing to released dai_name pointer.
*
* To avoid this rebind Card issue,
* 1) It needs to alloc memory to keep dai_name eventhough
* CPU or Codec driver was unbinded, or
* 2) user need to rebind Sound Card everytime
* if he unbinded CPU or Codec.
*/
ret = snd_soc_get_dai_name(&args, &dlc->dai_name);
if (ret < 0)
return ret;
dlc->of_node = node;
if (is_single_link)
*is_single_link = of_graph_get_endpoint_count(node) == 1;
return 0;
}
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
static void graph_parse_convert(struct device_node *ep,
struct simple_dai_props *props)
{
struct device_node *port = of_get_parent(ep);
struct device_node *ports = of_get_parent(port);
struct asoc_simple_data *adata = &props->adata;
if (of_node_name_eq(ports, "ports"))
asoc_simple_parse_convert(ports, NULL, adata);
asoc_simple_parse_convert(port, NULL, adata);
asoc_simple_parse_convert(ep, NULL, adata);
of_node_put(port);
of_node_put(ports);
}
2021-10-12 04:54:46 +00:00
static void graph_parse_mclk_fs(struct device_node *ep,
struct simple_dai_props *props)
{
struct device_node *port = of_get_parent(ep);
struct device_node *ports = of_get_parent(port);
if (of_node_name_eq(ports, "ports"))
of_property_read_u32(ports, "mclk-fs", &props->mclk_fs);
of_property_read_u32(port, "mclk-fs", &props->mclk_fs);
of_property_read_u32(ep, "mclk-fs", &props->mclk_fs);
of_node_put(port);
of_node_put(ports);
}
static int __graph_parse_node(struct asoc_simple_priv *priv,
enum graph_type gtype,
struct device_node *ep,
struct link_info *li,
int is_cpu, int idx)
{
struct device *dev = simple_priv_to_dev(priv);
struct snd_soc_dai_link *dai_link = simple_priv_to_link(priv, li->link);
struct simple_dai_props *dai_props = simple_priv_to_props(priv, li->link);
struct snd_soc_dai_link_component *dlc;
struct asoc_simple_dai *dai;
int ret, is_single_links = 0;
if (is_cpu) {
dlc = asoc_link_to_cpu(dai_link, idx);
dai = simple_props_to_dai_cpu(dai_props, idx);
} else {
dlc = asoc_link_to_codec(dai_link, idx);
dai = simple_props_to_dai_codec(dai_props, idx);
}
graph_parse_mclk_fs(ep, dai_props);
ret = asoc_simple_parse_dai(ep, dlc, &is_single_links);
if (ret < 0)
return ret;
ret = asoc_simple_parse_tdm(ep, dai);
if (ret < 0)
return ret;
ret = asoc_simple_parse_tdm_width_map(dev, ep, dai);
if (ret < 0)
return ret;
2021-10-12 04:54:46 +00:00
ret = asoc_simple_parse_clk(dev, ep, dai, dlc);
if (ret < 0)
return ret;
/*
* set DAI Name
*/
if (!dai_link->name) {
struct snd_soc_dai_link_component *cpus = dlc;
struct snd_soc_dai_link_component *codecs = asoc_link_to_codec(dai_link, idx);
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
char *cpu_multi = "";
char *codec_multi = "";
if (dai_link->num_cpus > 1)
cpu_multi = "_multi";
if (dai_link->num_codecs > 1)
codec_multi = "_multi";
2021-10-12 04:54:46 +00:00
switch (gtype) {
case GRAPH_NORMAL:
/* run is_cpu only. see audio_graph2_link_normal() */
if (is_cpu)
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
asoc_simple_set_dailink_name(dev, dai_link, "%s%s-%s%s",
cpus->dai_name, cpu_multi,
codecs->dai_name, codec_multi);
2021-10-12 04:54:46 +00:00
break;
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
case GRAPH_DPCM:
if (is_cpu)
asoc_simple_set_dailink_name(dev, dai_link, "fe.%pOFP.%s%s",
cpus->of_node, cpus->dai_name, cpu_multi);
else
asoc_simple_set_dailink_name(dev, dai_link, "be.%pOFP.%s%s",
codecs->of_node, codecs->dai_name, codec_multi);
break;
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
case GRAPH_C2C:
/* run is_cpu only. see audio_graph2_link_c2c() */
if (is_cpu)
asoc_simple_set_dailink_name(dev, dai_link, "c2c.%s%s-%s%s",
cpus->dai_name, cpu_multi,
codecs->dai_name, codec_multi);
break;
2021-10-12 04:54:46 +00:00
default:
break;
}
}
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
/*
* Check "prefix" from top node
* if DPCM-BE case
*/
if (!is_cpu && gtype == GRAPH_DPCM) {
struct snd_soc_dai_link_component *codecs = asoc_link_to_codec(dai_link, idx);
struct snd_soc_codec_conf *cconf = simple_props_to_codec_conf(dai_props, idx);
struct device_node *rport = of_get_parent(ep);
struct device_node *rports = of_get_parent(rport);
if (of_node_name_eq(rports, "ports"))
snd_soc_of_parse_node_prefix(rports, cconf, codecs->of_node, "prefix");
snd_soc_of_parse_node_prefix(rport, cconf, codecs->of_node, "prefix");
of_node_put(rport);
of_node_put(rports);
}
2021-10-12 04:54:46 +00:00
if (is_cpu) {
struct snd_soc_dai_link_component *cpus = dlc;
struct snd_soc_dai_link_component *platforms = asoc_link_to_platform(dai_link, idx);
asoc_simple_canonicalize_cpu(cpus, is_single_links);
asoc_simple_canonicalize_platform(platforms, cpus);
}
return 0;
}
static int graph_parse_node(struct asoc_simple_priv *priv,
enum graph_type gtype,
struct device_node *port,
struct link_info *li, int is_cpu)
{
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
struct device_node *ep;
int ret = 0;
2021-10-12 04:54:46 +00:00
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
if (graph_lnk_is_multi(port)) {
int idx;
of_node_get(port);
for (idx = 0;; idx++) {
ep = graph_get_next_multi_ep(&port);
if (!ep)
break;
ret = __graph_parse_node(priv, gtype, ep,
li, is_cpu, idx);
of_node_put(ep);
if (ret < 0)
break;
}
} else {
/* Single CPU / Codec */
ep = port_to_endpoint(port);
ret = __graph_parse_node(priv, gtype, ep, li, is_cpu, 0);
of_node_put(ep);
}
return ret;
2021-10-12 04:54:46 +00:00
}
static void graph_parse_daifmt(struct device_node *node,
unsigned int *daifmt, unsigned int *bit_frame)
{
unsigned int fmt;
/*
* see also above "daifmt" explanation
* and samples.
*/
/*
* ports {
* (A)
* port {
* (B)
* endpoint {
* (C)
* };
* };
* };
* };
*/
/*
* clock_provider:
*
* It can be judged it is provider
* if (A) or (B) or (C) has bitclock-master / frame-master flag.
*
* use "or"
*/
*bit_frame |= snd_soc_daifmt_parse_clock_provider_as_bitmap(node, NULL);
#define update_daifmt(name) \
if (!(*daifmt & SND_SOC_DAIFMT_##name##_MASK) && \
(fmt & SND_SOC_DAIFMT_##name##_MASK)) \
*daifmt |= fmt & SND_SOC_DAIFMT_##name##_MASK
/*
* format
*
* This function is called by (C) -> (B) -> (A) order.
* Set if applicable part was not yet set.
*/
fmt = snd_soc_daifmt_parse_format(node, NULL);
update_daifmt(FORMAT);
update_daifmt(CLOCK);
update_daifmt(INV);
}
static void graph_link_init(struct asoc_simple_priv *priv,
struct device_node *port,
struct link_info *li,
int is_cpu_node)
{
struct snd_soc_dai_link *dai_link = simple_priv_to_link(priv, li->link);
struct device_node *ep;
struct device_node *ports;
unsigned int daifmt = 0, daiclk = 0;
unsigned int bit_frame = 0;
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
if (graph_lnk_is_multi(port)) {
of_node_get(port);
ep = graph_get_next_multi_ep(&port);
port = of_get_parent(ep);
} else {
ep = port_to_endpoint(port);
}
2021-10-12 04:54:46 +00:00
ports = of_get_parent(port);
/*
* ports {
* (A)
* port {
* (B)
* endpoint {
* (C)
* };
* };
* };
* };
*/
graph_parse_daifmt(ep, &daifmt, &bit_frame); /* (C) */
graph_parse_daifmt(port, &daifmt, &bit_frame); /* (B) */
if (of_node_name_eq(ports, "ports"))
graph_parse_daifmt(ports, &daifmt, &bit_frame); /* (A) */
/*
* convert bit_frame
* We need to flip clock_provider if it was CPU node,
* because it is Codec base.
*/
daiclk = snd_soc_daifmt_clock_provider_from_bitmap(bit_frame);
if (is_cpu_node)
daiclk = snd_soc_daifmt_clock_provider_flipped(daiclk);
2021-10-12 04:54:46 +00:00
dai_link->dai_fmt = daifmt | daiclk;
dai_link->init = asoc_simple_dai_init;
dai_link->ops = &graph_ops;
if (priv->ops)
dai_link->ops = priv->ops;
}
int audio_graph2_link_normal(struct asoc_simple_priv *priv,
struct device_node *lnk,
struct link_info *li)
{
struct device_node *cpu_port = lnk;
struct device_node *cpu_ep = port_to_endpoint(cpu_port);
struct device_node *codec_port = of_graph_get_remote_port(cpu_ep);
int ret;
/*
* call Codec first.
* see
* __graph_parse_node() :: DAI Naming
*/
ret = graph_parse_node(priv, GRAPH_NORMAL, codec_port, li, 0);
if (ret < 0)
goto err;
/*
* call CPU, and set DAI Name
*/
ret = graph_parse_node(priv, GRAPH_NORMAL, cpu_port, li, 1);
if (ret < 0)
goto err;
graph_link_init(priv, cpu_port, li, 1);
err:
of_node_put(codec_port);
of_node_put(cpu_ep);
return ret;
}
EXPORT_SYMBOL_GPL(audio_graph2_link_normal);
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
int audio_graph2_link_dpcm(struct asoc_simple_priv *priv,
struct device_node *lnk,
struct link_info *li)
{
struct device_node *ep = port_to_endpoint(lnk);
struct device_node *rep = of_graph_get_remote_endpoint(ep);
struct device_node *rport = of_graph_get_remote_port(ep);
struct snd_soc_dai_link *dai_link = simple_priv_to_link(priv, li->link);
struct simple_dai_props *dai_props = simple_priv_to_props(priv, li->link);
int is_cpu = asoc_graph_is_ports0(lnk);
int ret;
if (is_cpu) {
/*
* dpcm {
* // Front-End
* ports@0 {
* => lnk: port@0 { ep: { ... = rep }; };
* ...
* };
* // Back-End
* ports@0 {
* ...
* };
* };
*
* CPU {
* rports: ports {
* rport: port@0 { rep: { ... = ep } };
* }
* }
*/
/*
* setup CPU here, Codec is already set as dummy.
* see
* asoc_simple_init_priv()
*/
dai_link->dynamic = 1;
dai_link->dpcm_merged_format = 1;
ret = graph_parse_node(priv, GRAPH_DPCM, rport, li, 1);
if (ret)
goto err;
} else {
/*
* dpcm {
* // Front-End
* ports@0 {
* ...
* };
* // Back-End
* ports@0 {
* => lnk: port@0 { ep: { ... = rep; }; };
* ...
* };
* };
*
* Codec {
* rports: ports {
* rport: port@0 { rep: { ... = ep; }; };
* }
* }
*/
/*
* setup Codec here, CPU is already set as dummy.
* see
* asoc_simple_init_priv()
*/
/* BE settings */
dai_link->no_pcm = 1;
dai_link->be_hw_params_fixup = asoc_simple_be_hw_params_fixup;
ret = graph_parse_node(priv, GRAPH_DPCM, rport, li, 0);
if (ret < 0)
goto err;
}
graph_parse_convert(rep, dai_props);
snd_soc_dai_link_set_capabilities(dai_link);
graph_link_init(priv, rport, li, is_cpu);
err:
of_node_put(ep);
of_node_put(rep);
of_node_put(rport);
return ret;
}
EXPORT_SYMBOL_GPL(audio_graph2_link_dpcm);
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
int audio_graph2_link_c2c(struct asoc_simple_priv *priv,
struct device_node *lnk,
struct link_info *li)
{
struct snd_soc_dai_link *dai_link = simple_priv_to_link(priv, li->link);
struct device_node *port0, *port1, *ports;
struct device_node *codec0_port, *codec1_port;
struct device_node *ep0, *ep1;
u32 val = 0;
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
int ret = -EINVAL;
/*
* codec2codec {
* ports {
* rate = <48000>;
* => lnk: port@0 { c2c0_ep: { ... = codec0_ep; }; };
* port@1 { c2c1_ep: { ... = codec1_ep; }; };
* };
* };
*
* Codec {
* ports {
* port@0 { codec0_ep: ... }; };
* port@1 { codec1_ep: ... }; };
* };
* };
*/
of_node_get(lnk);
port0 = lnk;
ports = of_get_parent(port0);
port1 = of_get_next_child(ports, lnk);
/*
* Card2 can use original Codec2Codec settings if DT has.
* It will use default settings if no settings on DT.
* see
* asoc_simple_init_for_codec2codec()
*
* Add more settings here if needed
*/
of_property_read_u32(ports, "rate", &val);
if (val) {
struct device *dev = simple_priv_to_dev(priv);
struct snd_soc_pcm_stream *c2c_conf;
c2c_conf = devm_kzalloc(dev, sizeof(*c2c_conf), GFP_KERNEL);
if (!c2c_conf)
goto err1;
c2c_conf->formats = SNDRV_PCM_FMTBIT_S32_LE; /* update ME */
c2c_conf->rates = SNDRV_PCM_RATE_8000_384000;
c2c_conf->rate_min =
c2c_conf->rate_max = val;
c2c_conf->channels_min =
c2c_conf->channels_max = 2; /* update ME */
dai_link->params = c2c_conf;
dai_link->num_params = 1;
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
}
ep0 = port_to_endpoint(port0);
ep1 = port_to_endpoint(port1);
codec0_port = of_graph_get_remote_port(ep0);
codec1_port = of_graph_get_remote_port(ep1);
/*
* call Codec first.
* see
* __graph_parse_node() :: DAI Naming
*/
ret = graph_parse_node(priv, GRAPH_C2C, codec1_port, li, 0);
if (ret < 0)
goto err2;
/*
* call CPU, and set DAI Name
*/
ret = graph_parse_node(priv, GRAPH_C2C, codec0_port, li, 1);
if (ret < 0)
goto err2;
graph_link_init(priv, codec0_port, li, 1);
err2:
of_node_put(ep0);
of_node_put(ep1);
of_node_put(codec0_port);
of_node_put(codec1_port);
err1:
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
of_node_put(ports);
of_node_put(port0);
of_node_put(port1);
return ret;
}
EXPORT_SYMBOL_GPL(audio_graph2_link_c2c);
2021-10-12 04:54:46 +00:00
static int graph_link(struct asoc_simple_priv *priv,
struct graph2_custom_hooks *hooks,
enum graph_type gtype,
struct device_node *lnk,
struct link_info *li)
{
struct device *dev = simple_priv_to_dev(priv);
GRAPH2_CUSTOM func = NULL;
int ret = -EINVAL;
switch (gtype) {
case GRAPH_NORMAL:
if (hooks && hooks->custom_normal)
func = hooks->custom_normal;
else
func = audio_graph2_link_normal;
break;
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
case GRAPH_DPCM:
if (hooks && hooks->custom_dpcm)
func = hooks->custom_dpcm;
else
func = audio_graph2_link_dpcm;
break;
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
case GRAPH_C2C:
if (hooks && hooks->custom_c2c)
func = hooks->custom_c2c;
else
func = audio_graph2_link_c2c;
break;
2021-10-12 04:54:46 +00:00
default:
break;
}
if (!func) {
dev_err(dev, "non supported gtype (%d)\n", gtype);
goto err;
}
ret = func(priv, lnk, li);
if (ret < 0)
goto err;
li->link++;
err:
return ret;
}
static int graph_counter(struct device_node *lnk)
{
ASoC: audio-graph-card2: add Multi CPU/Codec support This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.uk Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871r4qn8pk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:03 +00:00
/*
* Multi CPU / Codec
*
* multi {
* ports {
* => lnk: port@0 { ... };
* port@1 { ... };
* port@2 { ... };
* ...
* };
* };
*
* ignore first lnk part
*/
if (graph_lnk_is_multi(lnk))
return of_graph_get_endpoint_count(of_get_parent(lnk)) - 1;
/*
* Single CPU / Codec
*/
else
return 1;
2021-10-12 04:54:46 +00:00
}
static int graph_count_normal(struct asoc_simple_priv *priv,
struct device_node *lnk,
struct link_info *li)
{
struct device_node *cpu_port = lnk;
struct device_node *cpu_ep = port_to_endpoint(cpu_port);
struct device_node *codec_port = of_graph_get_remote_port(cpu_ep);
/*
* CPU {
* => lnk: port { endpoint { .. }; };
* };
*/
li->num[li->link].cpus =
li->num[li->link].platforms = graph_counter(cpu_port);
li->num[li->link].codecs = graph_counter(codec_port);
of_node_put(cpu_ep);
of_node_put(codec_port);
return 0;
}
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
static int graph_count_dpcm(struct asoc_simple_priv *priv,
struct device_node *lnk,
struct link_info *li)
{
struct device_node *ep = port_to_endpoint(lnk);
struct device_node *rport = of_graph_get_remote_port(ep);
/*
* dpcm {
* // Front-End
* ports@0 {
* => lnk: port@0 { endpoint { ... }; };
* ...
* };
* // Back-End
* ports@1 {
* => lnk: port@0 { endpoint { ... }; };
* ...
* };
* };
*/
if (asoc_graph_is_ports0(lnk)) {
li->num[li->link].cpus = graph_counter(rport); /* FE */
li->num[li->link].platforms = graph_counter(rport);
} else {
li->num[li->link].codecs = graph_counter(rport); /* BE */
}
of_node_put(ep);
of_node_put(rport);
return 0;
}
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
static int graph_count_c2c(struct asoc_simple_priv *priv,
struct device_node *lnk,
struct link_info *li)
{
struct device_node *ports = of_get_parent(lnk);
struct device_node *port0 = lnk;
struct device_node *port1 = of_get_next_child(ports, lnk);
struct device_node *ep0 = port_to_endpoint(port0);
struct device_node *ep1 = port_to_endpoint(port1);
struct device_node *codec0 = of_graph_get_remote_port(ep0);
struct device_node *codec1 = of_graph_get_remote_port(ep1);
of_node_get(lnk);
/*
* codec2codec {
* ports {
* => lnk: port@0 { endpoint { ... }; };
* port@1 { endpoint { ... }; };
* };
* };
*/
li->num[li->link].cpus =
li->num[li->link].platforms = graph_counter(codec0);
li->num[li->link].codecs = graph_counter(codec1);
of_node_put(ports);
of_node_put(port1);
of_node_put(ep0);
of_node_put(ep1);
of_node_put(codec0);
of_node_put(codec1);
return 0;
}
2021-10-12 04:54:46 +00:00
static int graph_count(struct asoc_simple_priv *priv,
struct graph2_custom_hooks *hooks,
enum graph_type gtype,
struct device_node *lnk,
struct link_info *li)
{
struct device *dev = simple_priv_to_dev(priv);
GRAPH2_CUSTOM func = NULL;
int ret = -EINVAL;
if (li->link >= SNDRV_MAX_LINKS) {
dev_err(dev, "too many links\n");
return ret;
}
switch (gtype) {
case GRAPH_NORMAL:
func = graph_count_normal;
break;
ASoC: audio-graph-card2: add DPCM support This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:12 +00:00
case GRAPH_DPCM:
func = graph_count_dpcm;
break;
ASoC: audio-graph-card2: add Codec2Codec support This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-12 04:55:33 +00:00
case GRAPH_C2C:
func = graph_count_c2c;
break;
2021-10-12 04:54:46 +00:00
default:
break;
}
if (!func) {
dev_err(dev, "non supported gtype (%d)\n", gtype);
goto err;
}
ret = func(priv, lnk, li);
if (ret < 0)
goto err;
li->link++;
err:
return ret;
}
static int graph_for_each_link(struct asoc_simple_priv *priv,
struct graph2_custom_hooks *hooks,
struct link_info *li,
int (*func)(struct asoc_simple_priv *priv,
struct graph2_custom_hooks *hooks,
enum graph_type gtype,
struct device_node *lnk,
struct link_info *li))
{
struct of_phandle_iterator it;
struct device *dev = simple_priv_to_dev(priv);
struct device_node *node = dev->of_node;
struct device_node *lnk;
enum graph_type gtype;
int rc, ret;
/* loop for all listed CPU port */
of_for_each_phandle(&it, rc, node, "links", NULL, 0) {
lnk = it.node;
gtype = graph_get_type(priv, lnk);
ret = func(priv, hooks, gtype, lnk, li);
if (ret < 0)
return ret;
}
return 0;
}
int audio_graph2_parse_of(struct asoc_simple_priv *priv, struct device *dev,
struct graph2_custom_hooks *hooks)
{
struct snd_soc_card *card = simple_priv_to_card(priv);
struct link_info *li;
int ret;
li = devm_kzalloc(dev, sizeof(*li), GFP_KERNEL);
if (!li)
return -ENOMEM;
card->probe = asoc_graph_card_probe;
card->owner = THIS_MODULE;
card->dev = dev;
if ((hooks) && (hooks)->hook_pre) {
ret = (hooks)->hook_pre(priv);
if (ret < 0)
goto err;
}
ret = graph_for_each_link(priv, hooks, li, graph_count);
if (!li->link)
ret = -EINVAL;
if (ret < 0)
goto err;
ret = asoc_simple_init_priv(priv, li);
if (ret < 0)
goto err;
priv->pa_gpio = devm_gpiod_get_optional(dev, "pa", GPIOD_OUT_LOW);
if (IS_ERR(priv->pa_gpio)) {
ret = PTR_ERR(priv->pa_gpio);
dev_err(dev, "failed to get amplifier gpio: %d\n", ret);
goto err;
}
ret = asoc_simple_parse_widgets(card, NULL);
if (ret < 0)
goto err;
ret = asoc_simple_parse_routing(card, NULL);
if (ret < 0)
goto err;
memset(li, 0, sizeof(*li));
ret = graph_for_each_link(priv, hooks, li, graph_link);
if (ret < 0)
goto err;
ret = asoc_simple_parse_card_name(card, NULL);
if (ret < 0)
goto err;
snd_soc_card_set_drvdata(card, priv);
if ((hooks) && (hooks)->hook_post) {
ret = (hooks)->hook_post(priv);
if (ret < 0)
goto err;
}
asoc_simple_debug_info(priv);
ret = devm_snd_soc_register_card(dev, card);
err:
devm_kfree(dev, li);
if (ret < 0)
dev_err_probe(dev, ret, "parse error\n");
2021-10-12 04:54:46 +00:00
if (ret == 0)
dev_warn(dev, "Audio Graph Card2 is still under Experimental stage\n");
2021-10-12 04:54:46 +00:00
return ret;
}
EXPORT_SYMBOL_GPL(audio_graph2_parse_of);
static int graph_probe(struct platform_device *pdev)
{
struct asoc_simple_priv *priv;
struct device *dev = &pdev->dev;
/* Allocate the private data and the DAI link array */
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
return audio_graph2_parse_of(priv, dev, NULL);
}
static const struct of_device_id graph_of_match[] = {
{ .compatible = "audio-graph-card2", },
{},
};
MODULE_DEVICE_TABLE(of, graph_of_match);
static struct platform_driver graph_card = {
.driver = {
.name = "asoc-audio-graph-card2",
.pm = &snd_soc_pm_ops,
.of_match_table = graph_of_match,
},
.probe = graph_probe,
.remove = asoc_simple_remove,
};
module_platform_driver(graph_card);
MODULE_ALIAS("platform:asoc-audio-graph-card2");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("ASoC Audio Graph Card2");
MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");