mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 21:02:19 +00:00
26 lines
1.1 KiB
Plaintext
26 lines
1.1 KiB
Plaintext
|
* The simple eMMC hardware reset provider
|
||
|
|
|
||
|
|
The purpose of this driver is to perform standard eMMC hw reset
|
||
|
|
procedure, as descibed by Jedec 4.4 specification. This procedure is
|
||
|
|
performed just after MMC core enabled power to the given mmc host (to
|
||
|
|
fix possible issues if bootloader has left eMMC card in initialized or
|
||
|
|
unknown state), and before performing complete system reboot (also in
|
||
|
|
case of emergency reboot call). The latter is needed on boards, which
|
||
|
|
doesn't have hardware reset logic connected to emmc card and (limited or
|
||
|
|
broken) ROM bootloaders are unable to read second stage from the emmc
|
||
|
|
card if the card is left in unknown or already initialized state.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : contains "mmc-pwrseq-emmc".
|
||
|
|
- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted
|
||
|
|
and then deasserted to perform eMMC card reset. To perform
|
||
|
|
reset procedure as described in Jedec 4.4 specification, the
|
||
|
|
gpio line should be defined as GPIO_ACTIVE_LOW.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
sdhci0_pwrseq {
|
||
|
|
compatible = "mmc-pwrseq-emmc";
|
||
|
|
reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||
|
|
}
|