linux/drivers/scsi/qla2xxx/qla_target.h

1173 lines
34 KiB
C
Raw Normal View History

[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
/*
* Copyright (C) 2004 - 2010 Vladislav Bolkhovitin <vst@vlnb.net>
* Copyright (C) 2004 - 2005 Leonid Stoljar
* Copyright (C) 2006 Nathaniel Clark <nate@misrule.us>
* Copyright (C) 2007 - 2010 ID7 Ltd.
*
* Forward port and refactoring to modern qla2xxx and target/configfs
*
* Copyright (C) 2010-2011 Nicholas A. Bellinger <nab@kernel.org>
*
* Additional file for the target driver support.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* This is the global def file that is useful for including from the
* target portion.
*/
#ifndef __QLA_TARGET_H
#define __QLA_TARGET_H
#include "qla_def.h"
/*
* Must be changed on any change in any initiator visible interfaces or
* data in the target add-on
*/
#define QLA2XXX_TARGET_MAGIC 269
/*
* Must be changed on any change in any target visible interfaces or
* data in the initiator
*/
#define QLA2XXX_INITIATOR_MAGIC 57222
#define QLA2XXX_INI_MODE_STR_EXCLUSIVE "exclusive"
#define QLA2XXX_INI_MODE_STR_DISABLED "disabled"
#define QLA2XXX_INI_MODE_STR_ENABLED "enabled"
#define QLA2XXX_INI_MODE_EXCLUSIVE 0
#define QLA2XXX_INI_MODE_DISABLED 1
#define QLA2XXX_INI_MODE_ENABLED 2
#define QLA2XXX_COMMAND_COUNT_INIT 250
#define QLA2XXX_IMMED_NOTIFY_COUNT_INIT 250
/*
* Used to mark which completion handles (for RIO Status's) are for CTIO's
* vs. regular (non-target) info. This is checked for in
* qla2x00_process_response_queue() to see if a handle coming back in a
* multi-complete should come to the tgt driver or be handled there by qla2xxx
*/
#define CTIO_COMPLETION_HANDLE_MARK BIT_29
#if (CTIO_COMPLETION_HANDLE_MARK <= DEFAULT_OUTSTANDING_COMMANDS)
#error "CTIO_COMPLETION_HANDLE_MARK not larger than "
"DEFAULT_OUTSTANDING_COMMANDS"
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
#endif
#define HANDLE_IS_CTIO_COMP(h) (h & CTIO_COMPLETION_HANDLE_MARK)
/* Used to mark CTIO as intermediate */
#define CTIO_INTERMEDIATE_HANDLE_MARK BIT_30
#ifndef OF_SS_MODE_0
/*
* ISP target entries - Flags bit definitions.
*/
#define OF_SS_MODE_0 0
#define OF_SS_MODE_1 1
#define OF_SS_MODE_2 2
#define OF_SS_MODE_3 3
#define OF_EXPL_CONF BIT_5 /* Explicit Confirmation Requested */
#define OF_DATA_IN BIT_6 /* Data in to initiator */
/* (data from target to initiator) */
#define OF_DATA_OUT BIT_7 /* Data out from initiator */
/* (data from initiator to target) */
#define OF_NO_DATA (BIT_7 | BIT_6)
#define OF_INC_RC BIT_8 /* Increment command resource count */
#define OF_FAST_POST BIT_9 /* Enable mailbox fast posting. */
#define OF_CONF_REQ BIT_13 /* Confirmation Requested */
#define OF_TERM_EXCH BIT_14 /* Terminate exchange */
#define OF_SSTS BIT_15 /* Send SCSI status */
#endif
#ifndef QLA_TGT_DATASEGS_PER_CMD32
#define QLA_TGT_DATASEGS_PER_CMD32 3
#define QLA_TGT_DATASEGS_PER_CONT32 7
#define QLA_TGT_MAX_SG32(ql) \
(((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD32 + \
QLA_TGT_DATASEGS_PER_CONT32*((ql) - 1)) : 0)
#define QLA_TGT_DATASEGS_PER_CMD64 2
#define QLA_TGT_DATASEGS_PER_CONT64 5
#define QLA_TGT_MAX_SG64(ql) \
(((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD64 + \
QLA_TGT_DATASEGS_PER_CONT64*((ql) - 1)) : 0)
#endif
#ifndef QLA_TGT_DATASEGS_PER_CMD_24XX
#define QLA_TGT_DATASEGS_PER_CMD_24XX 1
#define QLA_TGT_DATASEGS_PER_CONT_24XX 5
#define QLA_TGT_MAX_SG_24XX(ql) \
(min(1270, ((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD_24XX + \
QLA_TGT_DATASEGS_PER_CONT_24XX*((ql) - 1)) : 0))
#endif
#endif
#define GET_TARGET_ID(ha, iocb) ((HAS_EXTENDED_IDS(ha)) \
? le16_to_cpu((iocb)->u.isp2x.target.extended) \
: (uint16_t)(iocb)->u.isp2x.target.id.standard)
#ifndef IMMED_NOTIFY_TYPE
#define IMMED_NOTIFY_TYPE 0x0D /* Immediate notify entry. */
/*
* ISP queue - immediate notify entry structure definition.
* This is sent by the ISP to the Target driver.
* This IOCB would have report of events sent by the
* initiator, that needs to be handled by the target
* driver immediately.
*/
struct imm_ntfy_from_isp {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
union {
struct {
uint32_t sys_define_2; /* System defined. */
target_id_t target;
uint16_t lun;
uint8_t target_id;
uint8_t reserved_1;
uint16_t status_modifier;
uint16_t status;
uint16_t task_flags;
uint16_t seq_id;
uint16_t srr_rx_id;
uint32_t srr_rel_offs;
uint16_t srr_ui;
#define SRR_IU_DATA_IN 0x1
#define SRR_IU_DATA_OUT 0x5
#define SRR_IU_STATUS 0x7
uint16_t srr_ox_id;
uint8_t reserved_2[28];
} isp2x;
struct {
uint32_t reserved;
uint16_t nport_handle;
uint16_t reserved_2;
uint16_t flags;
#define NOTIFY24XX_FLAGS_GLOBAL_TPRLO BIT_1
#define NOTIFY24XX_FLAGS_PUREX_IOCB BIT_0
uint16_t srr_rx_id;
uint16_t status;
uint8_t status_subcode;
uint8_t fw_handle;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
uint32_t exchange_address;
uint32_t srr_rel_offs;
uint16_t srr_ui;
uint16_t srr_ox_id;
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-14 20:00:44 +00:00
union {
struct {
uint8_t node_name[8];
} plogi; /* PLOGI/ADISC/PDISC */
struct {
/* PRLI word 3 bit 0-15 */
uint16_t wd3_lo;
uint8_t resv0[6];
} prli;
struct {
uint8_t port_id[3];
uint8_t resv1;
uint16_t nport_handle;
uint16_t resv2;
} req_els;
} u;
uint8_t port_name[8];
uint8_t resv3[3];
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
uint8_t vp_index;
uint32_t reserved_5;
uint8_t port_id[3];
uint8_t reserved_6;
} isp24;
} u;
uint16_t reserved_7;
uint16_t ox_id;
} __packed;
#endif
#ifndef NOTIFY_ACK_TYPE
#define NOTIFY_ACK_TYPE 0x0E /* Notify acknowledge entry. */
/*
* ISP queue - notify acknowledge entry structure definition.
* This is sent to the ISP from the target driver.
*/
struct nack_to_isp {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
union {
struct {
uint32_t sys_define_2; /* System defined. */
target_id_t target;
uint8_t target_id;
uint8_t reserved_1;
uint16_t flags;
uint16_t resp_code;
uint16_t status;
uint16_t task_flags;
uint16_t seq_id;
uint16_t srr_rx_id;
uint32_t srr_rel_offs;
uint16_t srr_ui;
uint16_t srr_flags;
uint16_t srr_reject_code;
uint8_t srr_reject_vendor_uniq;
uint8_t srr_reject_code_expl;
uint8_t reserved_2[24];
} isp2x;
struct {
uint32_t handle;
uint16_t nport_handle;
uint16_t reserved_1;
uint16_t flags;
uint16_t srr_rx_id;
uint16_t status;
uint8_t status_subcode;
uint8_t fw_handle;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
uint32_t exchange_address;
uint32_t srr_rel_offs;
uint16_t srr_ui;
uint16_t srr_flags;
uint8_t reserved_4[19];
uint8_t vp_index;
uint8_t srr_reject_vendor_uniq;
uint8_t srr_reject_code_expl;
uint8_t srr_reject_code;
uint8_t reserved_5[5];
} isp24;
} u;
uint8_t reserved[2];
uint16_t ox_id;
} __packed;
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-14 20:00:44 +00:00
#define NOTIFY_ACK_FLAGS_TERMINATE BIT_3
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
#define NOTIFY_ACK_SRR_FLAGS_ACCEPT 0
#define NOTIFY_ACK_SRR_FLAGS_REJECT 1
#define NOTIFY_ACK_SRR_REJECT_REASON_UNABLE_TO_PERFORM 0x9
#define NOTIFY_ACK_SRR_FLAGS_REJECT_EXPL_NO_EXPL 0
#define NOTIFY_ACK_SRR_FLAGS_REJECT_EXPL_UNABLE_TO_SUPPLY_DATA 0x2a
#define NOTIFY_ACK_SUCCESS 0x01
#endif
#ifndef ACCEPT_TGT_IO_TYPE
#define ACCEPT_TGT_IO_TYPE 0x16 /* Accept target I/O entry. */
#endif
#ifndef CONTINUE_TGT_IO_TYPE
#define CONTINUE_TGT_IO_TYPE 0x17
/*
* ISP queue - Continue Target I/O (CTIO) entry for status mode 0 structure.
* This structure is sent to the ISP 2xxx from target driver.
*/
struct ctio_to_2xxx {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System defined handle */
target_id_t target;
uint16_t rx_id;
uint16_t flags;
uint16_t status;
uint16_t timeout; /* 0 = 30 seconds, 0xFFFF = disable */
uint16_t dseg_count; /* Data segment count. */
uint32_t relative_offset;
uint32_t residual;
uint16_t reserved_1[3];
uint16_t scsi_status;
uint32_t transfer_length;
uint32_t dseg_0_address; /* Data segment 0 address. */
uint32_t dseg_0_length; /* Data segment 0 length. */
uint32_t dseg_1_address; /* Data segment 1 address. */
uint32_t dseg_1_length; /* Data segment 1 length. */
uint32_t dseg_2_address; /* Data segment 2 address. */
uint32_t dseg_2_length; /* Data segment 2 length. */
} __packed;
#define ATIO_PATH_INVALID 0x07
#define ATIO_CANT_PROV_CAP 0x16
#define ATIO_CDB_VALID 0x3D
#define ATIO_EXEC_READ BIT_1
#define ATIO_EXEC_WRITE BIT_0
#endif
#ifndef CTIO_A64_TYPE
#define CTIO_A64_TYPE 0x1F
#define CTIO_SUCCESS 0x01
#define CTIO_ABORTED 0x02
#define CTIO_INVALID_RX_ID 0x08
#define CTIO_TIMEOUT 0x0B
#define CTIO_DIF_ERROR 0x0C /* DIF error detected */
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
#define CTIO_LIP_RESET 0x0E
#define CTIO_TARGET_RESET 0x17
#define CTIO_PORT_UNAVAILABLE 0x28
#define CTIO_PORT_LOGGED_OUT 0x29
#define CTIO_PORT_CONF_CHANGED 0x2A
#define CTIO_SRR_RECEIVED 0x45
#endif
#ifndef CTIO_RET_TYPE
#define CTIO_RET_TYPE 0x17 /* CTIO return entry */
#define ATIO_TYPE7 0x06 /* Accept target I/O entry for 24xx */
struct fcp_hdr {
uint8_t r_ctl;
uint8_t d_id[3];
uint8_t cs_ctl;
uint8_t s_id[3];
uint8_t type;
uint8_t f_ctl[3];
uint8_t seq_id;
uint8_t df_ctl;
uint16_t seq_cnt;
__be16 ox_id;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
uint16_t rx_id;
uint32_t parameter;
} __packed;
struct fcp_hdr_le {
uint8_t d_id[3];
uint8_t r_ctl;
uint8_t s_id[3];
uint8_t cs_ctl;
uint8_t f_ctl[3];
uint8_t type;
uint16_t seq_cnt;
uint8_t df_ctl;
uint8_t seq_id;
uint16_t rx_id;
uint16_t ox_id;
uint32_t parameter;
} __packed;
#define F_CTL_EXCH_CONTEXT_RESP BIT_23
#define F_CTL_SEQ_CONTEXT_RESIP BIT_22
#define F_CTL_LAST_SEQ BIT_20
#define F_CTL_END_SEQ BIT_19
#define F_CTL_SEQ_INITIATIVE BIT_16
#define R_CTL_BASIC_LINK_SERV 0x80
#define R_CTL_B_ACC 0x4
#define R_CTL_B_RJT 0x5
struct atio7_fcp_cmnd {
uint64_t lun;
uint8_t cmnd_ref;
uint8_t task_attr:3;
uint8_t reserved:5;
uint8_t task_mgmt_flags;
#define FCP_CMND_TASK_MGMT_CLEAR_ACA 6
#define FCP_CMND_TASK_MGMT_TARGET_RESET 5
#define FCP_CMND_TASK_MGMT_LU_RESET 4
#define FCP_CMND_TASK_MGMT_CLEAR_TASK_SET 2
#define FCP_CMND_TASK_MGMT_ABORT_TASK_SET 1
uint8_t wrdata:1;
uint8_t rddata:1;
uint8_t add_cdb_len:6;
uint8_t cdb[16];
/*
* add_cdb is optional and can absent from struct atio7_fcp_cmnd. Size 4
* only to make sizeof(struct atio7_fcp_cmnd) be as expected by
* BUILD_BUG_ON in qlt_init().
*/
uint8_t add_cdb[4];
/* uint32_t data_length; */
} __packed;
/*
* ISP queue - Accept Target I/O (ATIO) type entry IOCB structure.
* This is sent from the ISP to the target driver.
*/
struct atio_from_isp {
union {
struct {
uint16_t entry_hdr;
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t sys_define_2; /* System defined. */
target_id_t target;
uint16_t rx_id;
uint16_t flags;
uint16_t status;
uint8_t command_ref;
uint8_t task_codes;
uint8_t task_flags;
uint8_t execution_codes;
uint8_t cdb[MAX_CMDSZ];
uint32_t data_length;
uint16_t lun;
uint8_t initiator_port_name[WWN_SIZE]; /* on qla23xx */
uint16_t reserved_32[6];
uint16_t ox_id;
} isp2x;
struct {
uint16_t entry_hdr;
uint8_t fcp_cmnd_len_low;
uint8_t fcp_cmnd_len_high:4;
uint8_t attr:4;
uint32_t exchange_addr;
#define ATIO_EXCHANGE_ADDRESS_UNKNOWN 0xFFFFFFFF
struct fcp_hdr fcp_hdr;
struct atio7_fcp_cmnd fcp_cmnd;
} isp24;
struct {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t data[58];
uint32_t signature;
#define ATIO_PROCESSED 0xDEADDEAD /* Signature */
} raw;
} u;
} __packed;
#define CTIO_TYPE7 0x12 /* Continue target I/O entry (for 24xx) */
/*
* ISP queue - Continue Target I/O (ATIO) type 7 entry (for 24xx) structure.
* This structure is sent to the ISP 24xx from the target driver.
*/
struct ctio7_to_24xx {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System defined handle */
uint16_t nport_handle;
#define CTIO7_NHANDLE_UNRECOGNIZED 0xFFFF
uint16_t timeout;
uint16_t dseg_count; /* Data segment count. */
uint8_t vp_index;
uint8_t add_flags;
uint8_t initiator_id[3];
uint8_t reserved;
uint32_t exchange_addr;
union {
struct {
uint16_t reserved1;
__le16 flags;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
uint32_t residual;
__le16 ox_id;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
uint16_t scsi_status;
uint32_t relative_offset;
uint32_t reserved2;
uint32_t transfer_length;
uint32_t reserved3;
/* Data segment 0 address. */
uint32_t dseg_0_address[2];
/* Data segment 0 length. */
uint32_t dseg_0_length;
} status0;
struct {
uint16_t sense_length;
uint16_t flags;
uint32_t residual;
__le16 ox_id;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
uint16_t scsi_status;
uint16_t response_len;
uint16_t reserved;
uint8_t sense_data[24];
} status1;
} u;
} __packed;
/*
* ISP queue - CTIO type 7 from ISP 24xx to target driver
* returned entry structure.
*/
struct ctio7_from_24xx {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System defined handle */
uint16_t status;
uint16_t timeout;
uint16_t dseg_count; /* Data segment count. */
uint8_t vp_index;
uint8_t reserved1[5];
uint32_t exchange_address;
uint16_t reserved2;
uint16_t flags;
uint32_t residual;
uint16_t ox_id;
uint16_t reserved3;
uint32_t relative_offset;
uint8_t reserved4[24];
} __packed;
/* CTIO7 flags values */
#define CTIO7_FLAGS_SEND_STATUS BIT_15
#define CTIO7_FLAGS_TERMINATE BIT_14
#define CTIO7_FLAGS_CONFORM_REQ BIT_13
#define CTIO7_FLAGS_DONT_RET_CTIO BIT_8
#define CTIO7_FLAGS_STATUS_MODE_0 0
#define CTIO7_FLAGS_STATUS_MODE_1 BIT_6
#define CTIO7_FLAGS_STATUS_MODE_2 BIT_7
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
#define CTIO7_FLAGS_EXPLICIT_CONFORM BIT_5
#define CTIO7_FLAGS_CONFIRM_SATISF BIT_4
#define CTIO7_FLAGS_DSD_PTR BIT_2
#define CTIO7_FLAGS_DATA_IN BIT_1 /* data to initiator */
#define CTIO7_FLAGS_DATA_OUT BIT_0 /* data from initiator */
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
#define ELS_PLOGI 0x3
#define ELS_FLOGI 0x4
#define ELS_LOGO 0x5
#define ELS_PRLI 0x20
#define ELS_PRLO 0x21
#define ELS_TPRLO 0x24
#define ELS_PDISC 0x50
#define ELS_ADISC 0x52
/*
*CTIO Type CRC_2 IOCB
*/
struct ctio_crc2_to_fw {
uint8_t entry_type; /* Entry type. */
#define CTIO_CRC2 0x7A
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System handle. */
uint16_t nport_handle; /* N_PORT handle. */
__le16 timeout; /* Command timeout. */
uint16_t dseg_count; /* Data segment count. */
uint8_t vp_index;
uint8_t add_flags; /* additional flags */
#define CTIO_CRC2_AF_DIF_DSD_ENA BIT_3
uint8_t initiator_id[3]; /* initiator ID */
uint8_t reserved1;
uint32_t exchange_addr; /* rcv exchange address */
uint16_t reserved2;
__le16 flags; /* refer to CTIO7 flags values */
uint32_t residual;
__le16 ox_id;
uint16_t scsi_status;
__le32 relative_offset;
uint32_t reserved5;
__le32 transfer_length; /* total fc transfer length */
uint32_t reserved6;
__le32 crc_context_address[2];/* Data segment address. */
uint16_t crc_context_len; /* Data segment length. */
uint16_t reserved_1; /* MUST be set to 0. */
} __packed;
/* CTIO Type CRC_x Status IOCB */
struct ctio_crc_from_fw {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System handle. */
uint16_t status;
uint16_t timeout; /* Command timeout. */
uint16_t dseg_count; /* Data segment count. */
uint32_t reserved1;
uint16_t state_flags;
#define CTIO_CRC_SF_DIF_CHOPPED BIT_4
uint32_t exchange_address; /* rcv exchange address */
uint16_t reserved2;
uint16_t flags;
uint32_t resid_xfer_length;
uint16_t ox_id;
uint8_t reserved3[12];
uint16_t runt_guard; /* reported runt blk guard */
uint8_t actual_dif[8];
uint8_t expected_dif[8];
} __packed;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
/*
* ISP queue - ABTS received/response entries structure definition for 24xx.
*/
#define ABTS_RECV_24XX 0x54 /* ABTS received (for 24xx) */
#define ABTS_RESP_24XX 0x55 /* ABTS responce (for 24xx) */
/*
* ISP queue - ABTS received IOCB entry structure definition for 24xx.
* The ABTS BLS received from the wire is sent to the
* target driver by the ISP 24xx.
* The IOCB is placed on the response queue.
*/
struct abts_recv_from_24xx {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint8_t reserved_1[6];
uint16_t nport_handle;
uint8_t reserved_2[2];
uint8_t vp_index;
uint8_t reserved_3:4;
uint8_t sof_type:4;
uint32_t exchange_address;
struct fcp_hdr_le fcp_hdr_le;
uint8_t reserved_4[16];
uint32_t exchange_addr_to_abort;
} __packed;
#define ABTS_PARAM_ABORT_SEQ BIT_0
struct ba_acc_le {
uint16_t reserved;
uint8_t seq_id_last;
uint8_t seq_id_valid;
#define SEQ_ID_VALID 0x80
#define SEQ_ID_INVALID 0x00
uint16_t rx_id;
uint16_t ox_id;
uint16_t high_seq_cnt;
uint16_t low_seq_cnt;
} __packed;
struct ba_rjt_le {
uint8_t vendor_uniq;
uint8_t reason_expl;
uint8_t reason_code;
#define BA_RJT_REASON_CODE_INVALID_COMMAND 0x1
#define BA_RJT_REASON_CODE_UNABLE_TO_PERFORM 0x9
uint8_t reserved;
} __packed;
/*
* ISP queue - ABTS Response IOCB entry structure definition for 24xx.
* The ABTS response to the ABTS received is sent by the
* target driver to the ISP 24xx.
* The IOCB is placed on the request queue.
*/
struct abts_resp_to_24xx {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle;
uint16_t reserved_1;
uint16_t nport_handle;
uint16_t control_flags;
#define ABTS_CONTR_FLG_TERM_EXCHG BIT_0
uint8_t vp_index;
uint8_t reserved_3:4;
uint8_t sof_type:4;
uint32_t exchange_address;
struct fcp_hdr_le fcp_hdr_le;
union {
struct ba_acc_le ba_acct;
struct ba_rjt_le ba_rjt;
} __packed payload;
uint32_t reserved_4;
uint32_t exchange_addr_to_abort;
} __packed;
/*
* ISP queue - ABTS Response IOCB from ISP24xx Firmware entry structure.
* The ABTS response with completion status to the ABTS response
* (sent by the target driver to the ISP 24xx) is sent by the
* ISP24xx firmware to the target driver.
* The IOCB is placed on the response queue.
*/
struct abts_resp_from_24xx_fw {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle;
uint16_t compl_status;
#define ABTS_RESP_COMPL_SUCCESS 0
#define ABTS_RESP_COMPL_SUBCODE_ERROR 0x31
uint16_t nport_handle;
uint16_t reserved_1;
uint8_t reserved_2;
uint8_t reserved_3:4;
uint8_t sof_type:4;
uint32_t exchange_address;
struct fcp_hdr_le fcp_hdr_le;
uint8_t reserved_4[8];
uint32_t error_subcode1;
#define ABTS_RESP_SUBCODE_ERR_ABORTED_EXCH_NOT_TERM 0x1E
uint32_t error_subcode2;
uint32_t exchange_addr_to_abort;
} __packed;
/********************************************************************\
* Type Definitions used by initiator & target halves
\********************************************************************/
struct qla_tgt_mgmt_cmd;
struct qla_tgt_sess;
/*
* This structure provides a template of function calls that the
* target driver (from within qla_target.c) can issue to the
* target module (tcm_qla2xxx).
*/
struct qla_tgt_func_tmpl {
int (*handle_cmd)(struct scsi_qla_host *, struct qla_tgt_cmd *,
unsigned char *, uint32_t, int, int, int);
void (*handle_data)(struct qla_tgt_cmd *);
void (*handle_dif_err)(struct qla_tgt_cmd *);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
int (*handle_tmr)(struct qla_tgt_mgmt_cmd *, uint32_t, uint8_t,
uint32_t);
void (*free_cmd)(struct qla_tgt_cmd *);
void (*free_mcmd)(struct qla_tgt_mgmt_cmd *);
void (*free_session)(struct qla_tgt_sess *);
int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *,
void *, uint8_t *, uint16_t);
void (*update_sess)(struct qla_tgt_sess *, port_id_t, uint16_t, bool);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
struct qla_tgt_sess *(*find_sess_by_loop_id)(struct scsi_qla_host *,
const uint16_t);
struct qla_tgt_sess *(*find_sess_by_s_id)(struct scsi_qla_host *,
const uint8_t *);
void (*clear_nacl_from_fcport_map)(struct qla_tgt_sess *);
void (*put_sess)(struct qla_tgt_sess *);
void (*shutdown_sess)(struct qla_tgt_sess *);
};
int qla2x00_wait_for_hba_online(struct scsi_qla_host *);
#include <target/target_core_base.h>
#define QLA_TGT_TIMEOUT 10 /* in seconds */
#define QLA_TGT_MAX_HW_PENDING_TIME 60 /* in seconds */
/* Immediate notify status constants */
#define IMM_NTFY_LIP_RESET 0x000E
#define IMM_NTFY_LIP_LINK_REINIT 0x000F
#define IMM_NTFY_IOCB_OVERFLOW 0x0016
#define IMM_NTFY_ABORT_TASK 0x0020
#define IMM_NTFY_PORT_LOGOUT 0x0029
#define IMM_NTFY_PORT_CONFIG 0x002A
#define IMM_NTFY_GLBL_TPRLO 0x002D
#define IMM_NTFY_GLBL_LOGO 0x002E
#define IMM_NTFY_RESOURCE 0x0034
#define IMM_NTFY_MSG_RX 0x0036
#define IMM_NTFY_SRR 0x0045
#define IMM_NTFY_ELS 0x0046
/* Immediate notify task flags */
#define IMM_NTFY_TASK_MGMT_SHIFT 8
#define QLA_TGT_CLEAR_ACA 0x40
#define QLA_TGT_TARGET_RESET 0x20
#define QLA_TGT_LUN_RESET 0x10
#define QLA_TGT_CLEAR_TS 0x04
#define QLA_TGT_ABORT_TS 0x02
#define QLA_TGT_ABORT_ALL_SESS 0xFFFF
#define QLA_TGT_ABORT_ALL 0xFFFE
#define QLA_TGT_NEXUS_LOSS_SESS 0xFFFD
#define QLA_TGT_NEXUS_LOSS 0xFFFC
/* Notify Acknowledge flags */
#define NOTIFY_ACK_RES_COUNT BIT_8
#define NOTIFY_ACK_CLEAR_LIP_RESET BIT_5
#define NOTIFY_ACK_TM_RESP_CODE_VALID BIT_4
/* Command's states */
#define QLA_TGT_STATE_NEW 0 /* New command + target processing */
#define QLA_TGT_STATE_NEED_DATA 1 /* target needs data to continue */
#define QLA_TGT_STATE_DATA_IN 2 /* Data arrived + target processing */
#define QLA_TGT_STATE_PROCESSED 3 /* target done processing */
#define QLA_TGT_STATE_ABORTED 4 /* Command aborted */
/* Special handles */
#define QLA_TGT_NULL_HANDLE 0
#define QLA_TGT_SKIP_HANDLE (0xFFFFFFFF & ~CTIO_COMPLETION_HANDLE_MARK)
/* ATIO task_codes field */
#define ATIO_SIMPLE_QUEUE 0
#define ATIO_HEAD_OF_QUEUE 1
#define ATIO_ORDERED_QUEUE 2
#define ATIO_ACA_QUEUE 4
#define ATIO_UNTAGGED 5
/* TM failed response codes, see FCP (9.4.11 FCP_RSP_INFO) */
#define FC_TM_SUCCESS 0
#define FC_TM_BAD_FCP_DATA 1
#define FC_TM_BAD_CMD 2
#define FC_TM_FCP_DATA_MISMATCH 3
#define FC_TM_REJECT 4
#define FC_TM_FAILED 5
#if (BITS_PER_LONG > 32) || defined(CONFIG_HIGHMEM64G)
#define pci_dma_lo32(a) (a & 0xffffffff)
#define pci_dma_hi32(a) ((((a) >> 16)>>16) & 0xffffffff)
#else
#define pci_dma_lo32(a) (a & 0xffffffff)
#define pci_dma_hi32(a) 0
#endif
#define QLA_TGT_SENSE_VALID(sense) ((sense != NULL) && \
(((const uint8_t *)(sense))[0] & 0x70) == 0x70)
struct qla_port_24xx_data {
uint8_t port_name[WWN_SIZE];
uint16_t loop_id;
uint16_t reserved;
};
struct qla_tgt {
struct scsi_qla_host *vha;
struct qla_hw_data *ha;
/*
* To sync between IRQ handlers and qlt_target_release(). Needed,
* because req_pkt() can drop/reaquire HW lock inside. Protected by
* HW lock.
*/
int irq_cmd_count;
int datasegs_per_cmd, datasegs_per_cont, sg_tablesize;
/* Target's flags, serialized by pha->hardware_lock */
unsigned int tgt_enable_64bit_addr:1; /* 64-bits PCI addr enabled */
unsigned int link_reinit_iocb_pending:1;
/*
* Protected by tgt_mutex AND hardware_lock for writing and tgt_mutex
* OR hardware_lock for reading.
*/
int tgt_stop; /* the target mode driver is being stopped */
int tgt_stopped; /* the target mode driver has been stopped */
/* Count of sessions refering qla_tgt. Protected by hardware_lock. */
int sess_count;
/* Protected by hardware_lock. Addition also protected by tgt_mutex. */
struct list_head sess_list;
/* Protected by hardware_lock */
struct list_head del_sess_list;
struct delayed_work sess_del_work;
spinlock_t sess_work_lock;
struct list_head sess_works_list;
struct work_struct sess_work;
struct imm_ntfy_from_isp link_reinit_iocb;
wait_queue_head_t waitQ;
int notify_ack_expected;
int abts_resp_expected;
int modify_lun_expected;
int ctio_srr_id;
int imm_srr_id;
spinlock_t srr_lock;
struct list_head srr_ctio_list;
struct list_head srr_imm_list;
struct work_struct srr_work;
atomic_t tgt_global_resets_count;
struct list_head tgt_list_entry;
};
qla2xxx: Convert to percpu_ida session tag pre-allocation This patch converts qla2xxx target code to use generic percpu_ida tag allocation provided by target-core, thus removing the original kmem_cache_zalloc() for each struct qla_tgt_cmd descriptor in the incoming ATIO packet fast-path. This includes the conversion of qlt_handle_cmd_for_atio() to perform qla_tgt_sess lookup before dispatching a command descriptor into qla_tgt_wq process context, along with handling the case where no active session exists, and subsequently kicking off a seperate process context for qlt_create_sess_from_atio() to create a new one. It also includes moving tag allocation into generic code within qlt_get_tag(), so that the same logic can be shared between qlt_handle_cmd_for_atio() + qlt_create_sess_from_atio() contexts. Also, __qlt_do_work() has been made generic between both normal process context in qlt_do_work() + qlt_create_sess_from_atio(). Next, update qlt_free_cmd() to release the percpu-ida tags, and drop the now-unused global qla_tgt_cmd_cachep. Finally in tcm_qla2xxx code, tcm_qla2xxx_check_initiator_node_acl() has been updated to use transport_init_session_tags() along with a hardcoded TCM_QLA2XXX_DEFAULT_TAGS=2088 as the number of qla_tgt_cmd descriptors to pre-allocate per qla_tgt_sess instance. (Use ha->fw_xcb_count if available to calculate num_tags, and also factor in extra pad tags - Quinn) Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: Roland Dreier <roland@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-05-23 09:00:56 +00:00
struct qla_tgt_sess_op {
struct scsi_qla_host *vha;
struct atio_from_isp atio;
struct work_struct work;
struct list_head cmd_list;
bool aborted;
qla2xxx: Convert to percpu_ida session tag pre-allocation This patch converts qla2xxx target code to use generic percpu_ida tag allocation provided by target-core, thus removing the original kmem_cache_zalloc() for each struct qla_tgt_cmd descriptor in the incoming ATIO packet fast-path. This includes the conversion of qlt_handle_cmd_for_atio() to perform qla_tgt_sess lookup before dispatching a command descriptor into qla_tgt_wq process context, along with handling the case where no active session exists, and subsequently kicking off a seperate process context for qlt_create_sess_from_atio() to create a new one. It also includes moving tag allocation into generic code within qlt_get_tag(), so that the same logic can be shared between qlt_handle_cmd_for_atio() + qlt_create_sess_from_atio() contexts. Also, __qlt_do_work() has been made generic between both normal process context in qlt_do_work() + qlt_create_sess_from_atio(). Next, update qlt_free_cmd() to release the percpu-ida tags, and drop the now-unused global qla_tgt_cmd_cachep. Finally in tcm_qla2xxx code, tcm_qla2xxx_check_initiator_node_acl() has been updated to use transport_init_session_tags() along with a hardcoded TCM_QLA2XXX_DEFAULT_TAGS=2088 as the number of qla_tgt_cmd descriptors to pre-allocate per qla_tgt_sess instance. (Use ha->fw_xcb_count if available to calculate num_tags, and also factor in extra pad tags - Quinn) Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: Roland Dreier <roland@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-05-23 09:00:56 +00:00
};
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-14 20:00:44 +00:00
enum qla_sess_deletion {
QLA_SESS_DELETION_NONE = 0,
QLA_SESS_DELETION_PENDING = 1, /* hopefully we can get rid of
* this one */
QLA_SESS_DELETION_IN_PROGRESS = 2,
};
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
/*
* Equivilant to IT Nexus (Initiator-Target)
*/
struct qla_tgt_sess {
uint16_t loop_id;
port_id_t s_id;
unsigned int conf_compl_supported:1;
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-14 20:00:44 +00:00
unsigned int deleted:2;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
unsigned int local:1;
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-14 20:00:44 +00:00
unsigned int logout_on_delete:1;
unsigned int plogi_ack_needed:1;
unsigned int keep_nport_handle:1;
qla2xxx: Delete session if initiator is gone from FW 1. Initiator A is logged in with fc_id(1)/loop_id(1) 2. Initiator A re-logs in with fc_id(2)/loop_id(2) 3. Part of old session deletion async logoout for 1/1 is queued 4. Initiator B logs in with fc_id(1)/loop_id(1), starts passing data and creates session. 5. Async logo from 3 is processed by DPC and sent to FW Now initiator B has the session but is logged out from FW. This condition is detected first with CTIO error 29 at which point we should delete current session. During session deletion we will send LOGO to initiator to force re-login. Under rare circumstances initiator might be logged out of FW, not have driver session, but still think it's logged in. E.g. the above sequence plus session deletion due to re-config. Incoming commands will fail to create local session because initiator is not found in FW. In this case we also issue LOGO to initiator to force him re-login. Finally this patch fixes exchange leak when commands where received in logged out state. In this case loop_id must be set to FFFF when corresponding exchange is terminated. The patch modifies exchange termination to always use FFFF, since in certain scenarios it's impossible to tell whether command was received in logged in or logged out state. Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-12-17 19:57:01 +00:00
unsigned int send_els_logo:1;
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-14 20:00:44 +00:00
unsigned char logout_completed;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
int generation;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
struct se_session *se_sess;
struct scsi_qla_host *vha;
struct qla_tgt *tgt;
struct list_head sess_list_entry;
unsigned long expires;
struct list_head del_list_entry;
uint8_t port_name[WWN_SIZE];
struct work_struct free_work;
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-14 20:00:44 +00:00
union {
struct imm_ntfy_from_isp tm_iocb;
};
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
};
struct qla_tgt_cmd {
struct se_cmd se_cmd;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
struct qla_tgt_sess *sess;
int state;
struct work_struct free_work;
struct work_struct work;
/* Sense buffer that will be mapped into outgoing status */
unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER];
/* to save extra sess dereferences */
unsigned int conf_compl_supported:1;
unsigned int sg_mapped:1;
unsigned int free_sg:1;
unsigned int write_data_transferred:1;
unsigned int ctx_dsd_alloced:1;
unsigned int q_full:1;
unsigned int term_exchg:1;
unsigned int cmd_sent_to_fw:1;
unsigned int cmd_in_wq:1;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
struct scatterlist *sg; /* cmd data buffer SG vector */
int sg_cnt; /* SG segments count */
int bufflen; /* cmd buffer length */
int offset;
uint32_t unpacked_lun;
enum dma_data_direction dma_data_direction;
uint32_t reset_count;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
uint16_t loop_id; /* to save extra sess dereferences */
struct qla_tgt *tgt; /* to save extra sess dereferences */
struct scsi_qla_host *vha;
struct list_head cmd_list;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
struct atio_from_isp atio;
/* t10dif */
struct scatterlist *prot_sg;
uint32_t prot_sg_cnt;
uint32_t blk_sz;
struct crc_context *ctx;
uint64_t jiffies_at_alloc;
uint64_t jiffies_at_free;
/* BIT_0 - Atio Arrival / schedule to work
* BIT_1 - qlt_do_work
* BIT_2 - qlt_do work failed
* BIT_3 - xfer rdy/tcm_qla2xxx_write_pending
* BIT_4 - read respond/tcm_qla2xx_queue_data_in
* BIT_5 - status respond / tcm_qla2xx_queue_status
* BIT_6 - tcm request to abort/Term exchange.
* pre_xmit_response->qlt_send_term_exchange
* BIT_7 - SRR received (qlt_handle_srr->qlt_xmit_response)
* BIT_8 - SRR received (qlt_handle_srr->qlt_rdy_to_xfer)
* BIT_9 - SRR received (qla_handle_srr->qlt_send_term_exchange)
* BIT_10 - Data in - hanlde_data->tcm_qla2xxx_handle_data
* BIT_11 - Data actually going to TCM : tcm_qla2xx_handle_data_work
* BIT_12 - good completion - qlt_ctio_do_completion -->free_cmd
* BIT_13 - Bad completion -
* qlt_ctio_do_completion --> qlt_term_ctio_exchange
* BIT_14 - Back end data received/sent.
* BIT_15 - SRR prepare ctio
* BIT_16 - complete free
* BIT_17 - flush - qlt_abort_cmd_on_host_reset
* BIT_18 - completion w/abort status
* BIT_19 - completion w/unknown status
*/
uint32_t cmd_flags;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
};
struct qla_tgt_sess_work_param {
struct list_head sess_works_list_entry;
#define QLA_TGT_SESS_WORK_ABORT 1
#define QLA_TGT_SESS_WORK_TM 2
int type;
union {
struct abts_recv_from_24xx abts;
struct imm_ntfy_from_isp tm_iocb;
struct atio_from_isp tm_iocb2;
};
};
struct qla_tgt_mgmt_cmd {
uint8_t tmr_func;
uint8_t fc_tm_rsp;
struct qla_tgt_sess *sess;
struct se_cmd se_cmd;
struct work_struct free_work;
unsigned int flags;
uint32_t reset_count;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
#define QLA24XX_MGMT_SEND_NACK 1
union {
struct atio_from_isp atio;
struct imm_ntfy_from_isp imm_ntfy;
struct abts_recv_from_24xx abts;
} __packed orig_iocb;
};
struct qla_tgt_prm {
struct qla_tgt_cmd *cmd;
struct qla_tgt *tgt;
void *pkt;
struct scatterlist *sg; /* cmd data buffer SG vector */
unsigned char *sense_buffer;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
int seg_cnt;
int req_cnt;
uint16_t rq_result;
uint16_t scsi_status;
int sense_buffer_len;
int residual;
int add_status_pkt;
/* dif */
struct scatterlist *prot_sg;
uint16_t prot_seg_cnt;
uint16_t tot_dsds;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
};
struct qla_tgt_srr_imm {
struct list_head srr_list_entry;
int srr_id;
struct imm_ntfy_from_isp imm_ntfy;
};
struct qla_tgt_srr_ctio {
struct list_head srr_list_entry;
int srr_id;
struct qla_tgt_cmd *cmd;
};
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-14 20:00:44 +00:00
/* Check for Switch reserved address */
#define IS_SW_RESV_ADDR(_s_id) \
((_s_id.b.domain == 0xff) && (_s_id.b.area == 0xfc))
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
#define QLA_TGT_XMIT_DATA 1
#define QLA_TGT_XMIT_STATUS 2
#define QLA_TGT_XMIT_ALL (QLA_TGT_XMIT_STATUS|QLA_TGT_XMIT_DATA)
extern struct qla_tgt_data qla_target;
/*
* Function prototypes for qla_target.c logic used by qla2xxx LLD code.
*/
extern int qlt_add_target(struct qla_hw_data *, struct scsi_qla_host *);
extern int qlt_remove_target(struct qla_hw_data *, struct scsi_qla_host *);
extern int qlt_lport_register(void *, u64, u64, u64,
int (*callback)(struct scsi_qla_host *, void *, u64, u64));
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
extern void qlt_lport_deregister(struct scsi_qla_host *);
extern void qlt_unreg_sess(struct qla_tgt_sess *);
extern void qlt_fc_port_added(struct scsi_qla_host *, fc_port_t *);
extern void qlt_fc_port_deleted(struct scsi_qla_host *, fc_port_t *, int);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
extern int __init qlt_init(void);
extern void qlt_exit(void);
extern void qlt_update_vp_map(struct scsi_qla_host *, int);
/*
* This macro is used during early initializations when host->active_mode
* is not set. Right now, ha value is ignored.
*/
#define QLA_TGT_MODE_ENABLED() (ql2x_ini_mode != QLA2XXX_INI_MODE_ENABLED)
extern int ql2x_ini_mode;
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
static inline bool qla_tgt_mode_enabled(struct scsi_qla_host *ha)
{
return ha->host->active_mode & MODE_TARGET;
}
static inline bool qla_ini_mode_enabled(struct scsi_qla_host *ha)
{
return ha->host->active_mode & MODE_INITIATOR;
}
static inline void qla_reverse_ini_mode(struct scsi_qla_host *ha)
{
if (ha->host->active_mode & MODE_INITIATOR)
ha->host->active_mode &= ~MODE_INITIATOR;
else
ha->host->active_mode |= MODE_INITIATOR;
}
static inline uint32_t sid_to_key(const uint8_t *s_id)
{
uint32_t key;
key = (((unsigned long)s_id[0] << 16) |
((unsigned long)s_id[1] << 8) |
(unsigned long)s_id[2]);
return key;
}
qla2xxx: Delete session if initiator is gone from FW 1. Initiator A is logged in with fc_id(1)/loop_id(1) 2. Initiator A re-logs in with fc_id(2)/loop_id(2) 3. Part of old session deletion async logoout for 1/1 is queued 4. Initiator B logs in with fc_id(1)/loop_id(1), starts passing data and creates session. 5. Async logo from 3 is processed by DPC and sent to FW Now initiator B has the session but is logged out from FW. This condition is detected first with CTIO error 29 at which point we should delete current session. During session deletion we will send LOGO to initiator to force re-login. Under rare circumstances initiator might be logged out of FW, not have driver session, but still think it's logged in. E.g. the above sequence plus session deletion due to re-config. Incoming commands will fail to create local session because initiator is not found in FW. In this case we also issue LOGO to initiator to force him re-login. Finally this patch fixes exchange leak when commands where received in logged out state. In this case loop_id must be set to FFFF when corresponding exchange is terminated. The patch modifies exchange termination to always use FFFF, since in certain scenarios it's impossible to tell whether command was received in logged in or logged out state. Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-12-17 19:57:01 +00:00
static inline void sid_to_portid(const uint8_t *s_id, port_id_t *p)
{
memset(p, 0, sizeof(*p));
p->b.domain = s_id[0];
p->b.area = s_id[1];
p->b.al_pa = s_id[2];
}
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
/*
* Exported symbols from qla_target.c LLD logic used by qla2xxx code..
*/
extern void qlt_response_pkt_all_vps(struct scsi_qla_host *, response_t *);
extern int qlt_rdy_to_xfer(struct qla_tgt_cmd *);
extern int qlt_xmit_response(struct qla_tgt_cmd *, int, uint8_t);
extern void qlt_abort_cmd(struct qla_tgt_cmd *);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
extern void qlt_xmit_tm_rsp(struct qla_tgt_mgmt_cmd *);
extern void qlt_free_mcmd(struct qla_tgt_mgmt_cmd *);
extern void qlt_free_cmd(struct qla_tgt_cmd *cmd);
extern void qlt_async_event(uint16_t, struct scsi_qla_host *, uint16_t *);
extern void qlt_enable_vha(struct scsi_qla_host *);
extern void qlt_vport_create(struct scsi_qla_host *, struct qla_hw_data *);
extern void qlt_rff_id(struct scsi_qla_host *, struct ct_sns_req *);
extern void qlt_init_atio_q_entries(struct scsi_qla_host *);
extern void qlt_24xx_process_atio_queue(struct scsi_qla_host *);
extern void qlt_24xx_config_rings(struct scsi_qla_host *);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
extern void qlt_24xx_config_nvram_stage1(struct scsi_qla_host *,
struct nvram_24xx *);
extern void qlt_24xx_config_nvram_stage2(struct scsi_qla_host *,
struct init_cb_24xx *);
extern void qlt_81xx_config_nvram_stage2(struct scsi_qla_host *,
struct init_cb_81xx *);
extern void qlt_81xx_config_nvram_stage1(struct scsi_qla_host *,
struct nvram_81xx *);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
extern int qlt_24xx_process_response_error(struct scsi_qla_host *,
struct sts_entry_24xx *);
extern void qlt_modify_vp_config(struct scsi_qla_host *,
struct vp_config_entry_24xx *);
extern void qlt_probe_one_stage1(struct scsi_qla_host *, struct qla_hw_data *);
extern int qlt_mem_alloc(struct qla_hw_data *);
extern void qlt_mem_free(struct qla_hw_data *);
extern int qlt_stop_phase1(struct qla_tgt *);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
extern void qlt_stop_phase2(struct qla_tgt *);
extern irqreturn_t qla83xx_msix_atio_q(int, void *);
extern void qlt_83xx_iospace_config(struct qla_hw_data *);
extern int qlt_free_qfull_cmds(struct scsi_qla_host *);
qla2xxx: delay plogi/prli ack until existing sessions are deleted - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-14 20:00:44 +00:00
extern void qlt_logo_completion_handler(fc_port_t *, int);
extern void qlt_do_generation_tick(struct scsi_qla_host *, int *);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:28 +00:00
#endif /* __QLA_TARGET_H */