linux/arch/arm/boot/dts/kirkwood-dreamplug.dts

/dts-v1/;

/include/ "kirkwood.dtsi"

/ {
	model = "Globalscale Technologies Dreamplug";
	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";

	memory {
		device_type = "memory";
		reg = <0x00000000 0x20000000>;
	};

	chosen {
		bootargs = "console=ttyS0,115200n8 earlyprintk";
	};

	serial@f1012000 {
		compatible = "ns16550a";
		reg = <0xf1012000 0x100>;
		reg-shift = <2>;
		interrupts = <33>;
		clock-frequency = <200000000>;
	};
};
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2012-02-27 16:07:13 +00:00			`/dts-v1/;`

			`/include/ "kirkwood.dtsi"`

			`/ {`
			`model = "Globalscale Technologies Dreamplug";`
ARM: kirkwood: fdt: use mrvl ticker symbol Also, use inclusive register size for uart0. Signed-off-by: Jason Cooper <jason@lakedaemon.net> 2012-03-07 15:03:57 +00:00			`compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";`
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2012-02-27 16:07:13 +00:00
			`memory {`
			`device_type = "memory";`
			`reg = <0x00000000 0x20000000>;`
			`};`

			`chosen {`
			`bootargs = "console=ttyS0,115200n8 earlyprintk";`
			`};`

ARM: kirkwood: convert uart0 to devicetree. This uart is the primary console for the dreamplug. Removed kirkwood_uart0_init() call from board-dt.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2012-02-27 16:07:14 +00:00			`serial@f1012000 {`
			`compatible = "ns16550a";`
ARM: kirkwood: fdt: use mrvl ticker symbol Also, use inclusive register size for uart0. Signed-off-by: Jason Cooper <jason@lakedaemon.net> 2012-03-07 15:03:57 +00:00			`reg = <0xf1012000 0x100>;`
ARM: kirkwood: convert uart0 to devicetree. This uart is the primary console for the dreamplug. Removed kirkwood_uart0_init() call from board-dt.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2012-02-27 16:07:14 +00:00			`reg-shift = <2>;`
			`interrupts = <33>;`
			`clock-frequency = <200000000>;`
			`};`
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2012-02-27 16:07:13 +00:00			`};`