linux/fs/zonefs/zonefs.h

216 lines
5.4 KiB
C
Raw Normal View History

fs: New zonefs file system zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-25 07:07:44 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Simple zone file system for zoned block devices.
*
* Copyright (C) 2019 Western Digital Corporation or its affiliates.
*/
#ifndef __ZONEFS_H__
#define __ZONEFS_H__
#include <linux/fs.h>
#include <linux/magic.h>
#include <linux/uuid.h>
#include <linux/mutex.h>
#include <linux/rwsem.h>
#include <linux/kobject.h>
fs: New zonefs file system zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-25 07:07:44 +00:00
/*
* Maximum length of file names: this only needs to be large enough to fit
* the zone group directory names and a decimal zone number for file names.
* 16 characters is plenty.
*/
#define ZONEFS_NAME_MAX 16
/*
* Zone types: ZONEFS_ZTYPE_SEQ is used for all sequential zone types
* defined in linux/blkzoned.h, that is, BLK_ZONE_TYPE_SEQWRITE_REQ and
* BLK_ZONE_TYPE_SEQWRITE_PREF.
*/
enum zonefs_ztype {
ZONEFS_ZTYPE_CNV,
ZONEFS_ZTYPE_SEQ,
ZONEFS_ZTYPE_MAX,
};
static inline enum zonefs_ztype zonefs_zone_type(struct blk_zone *zone)
{
if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
return ZONEFS_ZTYPE_CNV;
return ZONEFS_ZTYPE_SEQ;
}
zonefs: open/close zone on file open/close NVMe Zoned Namespace introduced the concept of active zones, which are zones in the implicit open, explicit open or closed condition. Drives may have a limit on the number of zones that can be simultaneously active. This potential limitation translate into a risk for applications to see write IO errors due to this limit if the zone of a file being written to is not already active when a write request is issued. To avoid these potential errors, the zone of a file can explicitly be made active using an open zone command when the file is open for the first time. If the zone open command succeeds, the application is then guaranteed that write requests can be processed. This indirect management of active zones relies on the maximum number of open zones of a drive, which is always lower or equal to the maximum number of active zones. On the first open of a sequential zone file, send a REQ_OP_ZONE_OPEN command to the block device. Conversely, on the last release of a zone file and send a REQ_OP_ZONE_CLOSE to the device if the zone is not full or empty. As truncating a zone file to 0 or max can deactivate a zone as well, we need to serialize against truncates and also be careful not to close a zone as the file may still be open for writing, e.g. the user called ftruncate(). If the zone file is not open and a process does a truncate(), then no close operation is needed. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-09-11 08:56:50 +00:00
#define ZONEFS_ZONE_OPEN (1 << 0)
#define ZONEFS_ZONE_ACTIVE (1 << 1)
zonefs: open/close zone on file open/close NVMe Zoned Namespace introduced the concept of active zones, which are zones in the implicit open, explicit open or closed condition. Drives may have a limit on the number of zones that can be simultaneously active. This potential limitation translate into a risk for applications to see write IO errors due to this limit if the zone of a file being written to is not already active when a write request is issued. To avoid these potential errors, the zone of a file can explicitly be made active using an open zone command when the file is open for the first time. If the zone open command succeeds, the application is then guaranteed that write requests can be processed. This indirect management of active zones relies on the maximum number of open zones of a drive, which is always lower or equal to the maximum number of active zones. On the first open of a sequential zone file, send a REQ_OP_ZONE_OPEN command to the block device. Conversely, on the last release of a zone file and send a REQ_OP_ZONE_CLOSE to the device if the zone is not full or empty. As truncating a zone file to 0 or max can deactivate a zone as well, we need to serialize against truncates and also be careful not to close a zone as the file may still be open for writing, e.g. the user called ftruncate(). If the zone file is not open and a process does a truncate(), then no close operation is needed. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-09-11 08:56:50 +00:00
fs: New zonefs file system zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-25 07:07:44 +00:00
/*
* In-memory inode data.
*/
struct zonefs_inode_info {
struct inode i_vnode;
/* File zone type */
enum zonefs_ztype i_ztype;
/* File zone start sector (512B unit) */
sector_t i_zsector;
/* File zone write pointer position (sequential zones only) */
loff_t i_wpoffset;
/* File maximum size */
loff_t i_max_size;
/* File zone size */
loff_t i_zone_size;
fs: New zonefs file system zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-25 07:07:44 +00:00
/*
* To serialise fully against both syscall and mmap based IO and
* sequential file truncation, two locks are used. For serializing
* zonefs_seq_file_truncate() against zonefs_iomap_begin(), that is,
* file truncate operations against block mapping, i_truncate_mutex is
* used. i_truncate_mutex also protects against concurrent accesses
* and changes to the inode private data, and in particular changes to
* a sequential file size on completion of direct IO writes.
* Serialization of mmap read IOs with truncate and syscall IO
* operations is done with invalidate_lock in addition to
* i_truncate_mutex. Only zonefs_seq_file_truncate() takes both lock
* (invalidate_lock first, i_truncate_mutex second).
fs: New zonefs file system zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-25 07:07:44 +00:00
*/
struct mutex i_truncate_mutex;
zonefs: open/close zone on file open/close NVMe Zoned Namespace introduced the concept of active zones, which are zones in the implicit open, explicit open or closed condition. Drives may have a limit on the number of zones that can be simultaneously active. This potential limitation translate into a risk for applications to see write IO errors due to this limit if the zone of a file being written to is not already active when a write request is issued. To avoid these potential errors, the zone of a file can explicitly be made active using an open zone command when the file is open for the first time. If the zone open command succeeds, the application is then guaranteed that write requests can be processed. This indirect management of active zones relies on the maximum number of open zones of a drive, which is always lower or equal to the maximum number of active zones. On the first open of a sequential zone file, send a REQ_OP_ZONE_OPEN command to the block device. Conversely, on the last release of a zone file and send a REQ_OP_ZONE_CLOSE to the device if the zone is not full or empty. As truncating a zone file to 0 or max can deactivate a zone as well, we need to serialize against truncates and also be careful not to close a zone as the file may still be open for writing, e.g. the user called ftruncate(). If the zone file is not open and a process does a truncate(), then no close operation is needed. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-09-11 08:56:50 +00:00
/* guarded by i_truncate_mutex */
unsigned int i_wr_refcnt;
unsigned int i_flags;
fs: New zonefs file system zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-25 07:07:44 +00:00
};
static inline struct zonefs_inode_info *ZONEFS_I(struct inode *inode)
{
return container_of(inode, struct zonefs_inode_info, i_vnode);
}
/*
* On-disk super block (block 0).
*/
#define ZONEFS_LABEL_LEN 64
#define ZONEFS_UUID_SIZE 16
#define ZONEFS_SUPER_SIZE 4096
struct zonefs_super {
/* Magic number */
__le32 s_magic;
/* Checksum */
__le32 s_crc;
/* Volume label */
char s_label[ZONEFS_LABEL_LEN];
/* 128-bit uuid */
__u8 s_uuid[ZONEFS_UUID_SIZE];
/* Features */
__le64 s_features;
/* UID/GID to use for files */
__le32 s_uid;
__le32 s_gid;
/* File permissions */
__le32 s_perm;
/* Padding to ZONEFS_SUPER_SIZE bytes */
__u8 s_reserved[3988];
} __packed;
/*
* Feature flags: specified in the s_features field of the on-disk super
* block struct zonefs_super and in-memory in the s_feartures field of
* struct zonefs_sb_info.
*/
enum zonefs_features {
/*
* Aggregate contiguous conventional zones into a single file.
*/
ZONEFS_F_AGGRCNV = 1ULL << 0,
/*
* Use super block specified UID for files instead of default 0.
*/
ZONEFS_F_UID = 1ULL << 1,
/*
* Use super block specified GID for files instead of default 0.
*/
ZONEFS_F_GID = 1ULL << 2,
/*
* Use super block specified file permissions instead of default 640.
*/
ZONEFS_F_PERM = 1ULL << 3,
};
#define ZONEFS_F_DEFINED_FEATURES \
(ZONEFS_F_AGGRCNV | ZONEFS_F_UID | ZONEFS_F_GID | ZONEFS_F_PERM)
/*
* Mount options for zone write pointer error handling.
*/
#define ZONEFS_MNTOPT_ERRORS_RO (1 << 0) /* Make zone file readonly */
#define ZONEFS_MNTOPT_ERRORS_ZRO (1 << 1) /* Make zone file offline */
#define ZONEFS_MNTOPT_ERRORS_ZOL (1 << 2) /* Make zone file offline */
#define ZONEFS_MNTOPT_ERRORS_REPAIR (1 << 3) /* Remount read-only */
#define ZONEFS_MNTOPT_ERRORS_MASK \
(ZONEFS_MNTOPT_ERRORS_RO | ZONEFS_MNTOPT_ERRORS_ZRO | \
ZONEFS_MNTOPT_ERRORS_ZOL | ZONEFS_MNTOPT_ERRORS_REPAIR)
zonefs: open/close zone on file open/close NVMe Zoned Namespace introduced the concept of active zones, which are zones in the implicit open, explicit open or closed condition. Drives may have a limit on the number of zones that can be simultaneously active. This potential limitation translate into a risk for applications to see write IO errors due to this limit if the zone of a file being written to is not already active when a write request is issued. To avoid these potential errors, the zone of a file can explicitly be made active using an open zone command when the file is open for the first time. If the zone open command succeeds, the application is then guaranteed that write requests can be processed. This indirect management of active zones relies on the maximum number of open zones of a drive, which is always lower or equal to the maximum number of active zones. On the first open of a sequential zone file, send a REQ_OP_ZONE_OPEN command to the block device. Conversely, on the last release of a zone file and send a REQ_OP_ZONE_CLOSE to the device if the zone is not full or empty. As truncating a zone file to 0 or max can deactivate a zone as well, we need to serialize against truncates and also be careful not to close a zone as the file may still be open for writing, e.g. the user called ftruncate(). If the zone file is not open and a process does a truncate(), then no close operation is needed. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-09-11 08:56:50 +00:00
#define ZONEFS_MNTOPT_EXPLICIT_OPEN (1 << 4) /* Explicit open/close of zones on open/close */
fs: New zonefs file system zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-25 07:07:44 +00:00
/*
* In-memory Super block information.
*/
struct zonefs_sb_info {
unsigned long s_mount_opts;
spinlock_t s_lock;
unsigned long long s_features;
kuid_t s_uid;
kgid_t s_gid;
umode_t s_perm;
uuid_t s_uuid;
unsigned int s_zone_sectors_shift;
unsigned int s_nr_files[ZONEFS_ZTYPE_MAX];
loff_t s_blocks;
loff_t s_used_blocks;
zonefs: open/close zone on file open/close NVMe Zoned Namespace introduced the concept of active zones, which are zones in the implicit open, explicit open or closed condition. Drives may have a limit on the number of zones that can be simultaneously active. This potential limitation translate into a risk for applications to see write IO errors due to this limit if the zone of a file being written to is not already active when a write request is issued. To avoid these potential errors, the zone of a file can explicitly be made active using an open zone command when the file is open for the first time. If the zone open command succeeds, the application is then guaranteed that write requests can be processed. This indirect management of active zones relies on the maximum number of open zones of a drive, which is always lower or equal to the maximum number of active zones. On the first open of a sequential zone file, send a REQ_OP_ZONE_OPEN command to the block device. Conversely, on the last release of a zone file and send a REQ_OP_ZONE_CLOSE to the device if the zone is not full or empty. As truncating a zone file to 0 or max can deactivate a zone as well, we need to serialize against truncates and also be careful not to close a zone as the file may still be open for writing, e.g. the user called ftruncate(). If the zone file is not open and a process does a truncate(), then no close operation is needed. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-09-11 08:56:50 +00:00
unsigned int s_max_wro_seq_files;
atomic_t s_wro_seq_files;
unsigned int s_max_active_seq_files;
atomic_t s_active_seq_files;
bool s_sysfs_registered;
struct kobject s_kobj;
struct completion s_kobj_unregister;
fs: New zonefs file system zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-25 07:07:44 +00:00
};
static inline struct zonefs_sb_info *ZONEFS_SB(struct super_block *sb)
{
return sb->s_fs_info;
}
#define zonefs_info(sb, format, args...) \
pr_info("zonefs (%s): " format, sb->s_id, ## args)
#define zonefs_err(sb, format, args...) \
pr_err("zonefs (%s) ERROR: " format, sb->s_id, ## args)
#define zonefs_warn(sb, format, args...) \
pr_warn("zonefs (%s) WARNING: " format, sb->s_id, ## args)
int zonefs_sysfs_register(struct super_block *sb);
void zonefs_sysfs_unregister(struct super_block *sb);
int zonefs_sysfs_init(void);
void zonefs_sysfs_exit(void);
fs: New zonefs file system zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-25 07:07:44 +00:00
#endif