2019-05-19 12:08:55 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* Generic hugetlb support.
|
2012-12-06 09:39:54 +00:00
|
|
|
* (C) Nadia Yvette Chambers, April 2004
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/mm.h>
|
2008-10-15 19:50:22 +00:00
|
|
|
#include <linux/seq_file.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/sysctl.h>
|
|
|
|
#include <linux/highmem.h>
|
mmu-notifiers: core
With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages.
There are secondary MMUs (with secondary sptes and secondary tlbs) too.
sptes in the kvm case are shadow pagetables, but when I say spte in
mmu-notifier context, I mean "secondary pte". In GRU case there's no
actual secondary pte and there's only a secondary tlb because the GRU
secondary MMU has no knowledge about sptes and every secondary tlb miss
event in the MMU always generates a page fault that has to be resolved by
the CPU (this is not the case of KVM where the a secondary tlb miss will
walk sptes in hardware and it will refill the secondary tlb transparently
to software if the corresponding spte is present). The same way
zap_page_range has to invalidate the pte before freeing the page, the spte
(and secondary tlb) must also be invalidated before any page is freed and
reused.
Currently we take a page_count pin on every page mapped by sptes, but that
means the pages can't be swapped whenever they're mapped by any spte
because they're part of the guest working set. Furthermore a spte unmap
event can immediately lead to a page to be freed when the pin is released
(so requiring the same complex and relatively slow tlb_gather smp safe
logic we have in zap_page_range and that can be avoided completely if the
spte unmap event doesn't require an unpin of the page previously mapped in
the secondary MMU).
The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know
when the VM is swapping or freeing or doing anything on the primary MMU so
that the secondary MMU code can drop sptes before the pages are freed,
avoiding all page pinning and allowing 100% reliable swapping of guest
physical address space. Furthermore it avoids the code that teardown the
mappings of the secondary MMU, to implement a logic like tlb_gather in
zap_page_range that would require many IPI to flush other cpu tlbs, for
each fixed number of spte unmapped.
To make an example: if what happens on the primary MMU is a protection
downgrade (from writeable to wrprotect) the secondary MMU mappings will be
invalidated, and the next secondary-mmu-page-fault will call
get_user_pages and trigger a do_wp_page through get_user_pages if it
called get_user_pages with write=1, and it'll re-establishing an updated
spte or secondary-tlb-mapping on the copied page. Or it will setup a
readonly spte or readonly tlb mapping if it's a guest-read, if it calls
get_user_pages with write=0. This is just an example.
This allows to map any page pointed by any pte (and in turn visible in the
primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an
full MMU with both sptes and secondary-tlb like the shadow-pagetable layer
with kvm), or a remote DMA in software like XPMEM (hence needing of
schedule in XPMEM code to send the invalidate to the remote node, while no
need to schedule in kvm/gru as it's an immediate event like invalidating
primary-mmu pte).
At least for KVM without this patch it's impossible to swap guests
reliably. And having this feature and removing the page pin allows
several other optimizations that simplify life considerably.
Dependencies:
1) mm_take_all_locks() to register the mmu notifier when the whole VM
isn't doing anything with "mm". This allows mmu notifier users to keep
track if the VM is in the middle of the invalidate_range_begin/end
critical section with an atomic counter incraese in range_begin and
decreased in range_end. No secondary MMU page fault is allowed to map
any spte or secondary tlb reference, while the VM is in the middle of
range_begin/end as any page returned by get_user_pages in that critical
section could later immediately be freed without any further
->invalidate_page notification (invalidate_range_begin/end works on
ranges and ->invalidate_page isn't called immediately before freeing
the page). To stop all page freeing and pagetable overwrites the
mmap_sem must be taken in write mode and all other anon_vma/i_mmap
locks must be taken too.
2) It'd be a waste to add branches in the VM if nobody could possibly
run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if
CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of
mmu notifiers, but this already allows to compile a KVM external module
against a kernel with mmu notifiers enabled and from the next pull from
kvm.git we'll start using them. And GRU/XPMEM will also be able to
continue the development by enabling KVM=m in their config, until they
submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can
also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n).
This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM
are all =n.
The mmu_notifier_register call can fail because mm_take_all_locks may be
interrupted by a signal and return -EINTR. Because mmu_notifier_reigster
is used when a driver startup, a failure can be gracefully handled. Here
an example of the change applied to kvm to register the mmu notifiers.
Usually when a driver startups other allocations are required anyway and
-ENOMEM failure paths exists already.
struct kvm *kvm_arch_create_vm(void)
{
struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL);
+ int err;
if (!kvm)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);
+ kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops;
+ err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm);
+ if (err) {
+ kfree(kvm);
+ return ERR_PTR(err);
+ }
+
return kvm;
}
mmu_notifier_unregister returns void and it's reliable.
The patch also adds a few needed but missing includes that would prevent
kernel to compile after these changes on non-x86 archs (x86 didn't need
them by luck).
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix mm/filemap_xip.c build]
[akpm@linux-foundation.org: fix mm/mmu_notifier.c build]
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kanoj Sarcar <kanojsarcar@yahoo.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Chris Wright <chrisw@redhat.com>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Izik Eidus <izike@qumranet.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
|
|
|
#include <linux/mmu_notifier.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/nodemask.h>
|
2005-06-22 00:14:44 +00:00
|
|
|
#include <linux/pagemap.h>
|
2006-01-06 08:10:46 +00:00
|
|
|
#include <linux/mempolicy.h>
|
2014-04-07 22:37:26 +00:00
|
|
|
#include <linux/compiler.h>
|
2006-01-08 09:00:57 +00:00
|
|
|
#include <linux/cpuset.h>
|
[PATCH] hugepage: serialize hugepage allocation and instantiation
Currently, no lock or mutex is held between allocating a hugepage and
inserting it into the pagetables / page cache. When we do go to insert the
page into pagetables or page cache, we recheck and may free the newly
allocated hugepage. However, since the number of hugepages in the system
is strictly limited, and it's usualy to want to use all of them, this can
still lead to spurious allocation failures.
For example, suppose two processes are both mapping (MAP_SHARED) the same
hugepage file, large enough to consume the entire available hugepage pool.
If they race instantiating the last page in the mapping, they will both
attempt to allocate the last available hugepage. One will fail, of course,
returning OOM from the fault and thus causing the process to be killed,
despite the fact that the entire mapping can, in fact, be instantiated.
The patch fixes this race by the simple method of adding a (sleeping) mutex
to serialize the hugepage fault path between allocation and insertion into
pagetables and/or page cache. It would be possible to avoid the
serialization by catching the allocation failures, waiting on some
condition, then rechecking to see if someone else has instantiated the page
for us. Given the likely frequency of hugepage instantiations, it seems
very doubtful it's worth the extra complexity.
This patch causes no regression on the libhugetlbfs testsuite, and one
test, which can trigger this race now passes where it previously failed.
Actually, the test still sometimes fails, though less often and only as a
shmat() failure, rather processes getting OOM killed by the VM. The dodgy
heuristic tests in fs/hugetlbfs/inode.c for whether there's enough hugepage
space aren't protected by the new mutex, and would be ugly to do so, so
there's still a race there. Another patch to replace those tests with
something saner for this reason as well as others coming...
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 08:08:53 +00:00
|
|
|
#include <linux/mutex.h>
|
2018-10-30 22:09:44 +00:00
|
|
|
#include <linux/memblock.h>
|
2008-07-24 04:27:44 +00:00
|
|
|
#include <linux/sysfs.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
|
|
|
#include <linux/slab.h>
|
2020-08-12 01:37:38 +00:00
|
|
|
#include <linux/sched/mm.h>
|
hugetlbfs: check for pgoff value overflow
A vma with vm_pgoff large enough to overflow a loff_t type when
converted to a byte offset can be passed via the remap_file_pages system
call. The hugetlbfs mmap routine uses the byte offset to calculate
reservations and file size.
A sequence such as:
mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0);
remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0);
will result in the following when task exits/file closed,
kernel BUG at mm/hugetlb.c:749!
Call Trace:
hugetlbfs_evict_inode+0x2f/0x40
evict+0xcb/0x190
__dentry_kill+0xcb/0x150
__fput+0x164/0x1e0
task_work_run+0x84/0xa0
exit_to_usermode_loop+0x7d/0x80
do_syscall_64+0x18b/0x190
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
The overflowed pgoff value causes hugetlbfs to try to set up a mapping
with a negative range (end < start) that leaves invalid state which
causes the BUG.
The previous overflow fix to this code was incomplete and did not take
the remap_file_pages system call into account.
[mike.kravetz@oracle.com: v3]
Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com
[akpm@linux-foundation.org: include mmdebug.h]
[akpm@linux-foundation.org: fix -ve left shift count on sh]
Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com
Fixes: 045c7a3f53d9 ("hugetlbfs: fix offset overflow in hugetlbfs mmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nic Losby <blurbdust@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-22 23:17:13 +00:00
|
|
|
#include <linux/mmdebug.h>
|
2017-02-02 18:15:33 +00:00
|
|
|
#include <linux/sched/signal.h>
|
2010-05-28 00:29:16 +00:00
|
|
|
#include <linux/rmap.h>
|
2017-07-10 22:48:56 +00:00
|
|
|
#include <linux/string_helpers.h>
|
2010-05-28 00:29:21 +00:00
|
|
|
#include <linux/swap.h>
|
|
|
|
#include <linux/swapops.h>
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
#include <linux/jhash.h>
|
2019-03-05 23:42:58 +00:00
|
|
|
#include <linux/numa.h>
|
2020-01-04 21:00:15 +00:00
|
|
|
#include <linux/llist.h>
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
#include <linux/cma.h>
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
#include <linux/migrate.h>
|
2022-03-22 21:45:20 +00:00
|
|
|
#include <linux/nospec.h>
|
2022-06-01 22:55:25 +00:00
|
|
|
#include <linux/delayacct.h>
|
2022-09-14 07:26:02 +00:00
|
|
|
#include <linux/memory.h>
|
mm: make PTE_MARKER_SWAPIN_ERROR more general
Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.
This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.
This patch (of 8):
Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:
First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.
Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.
For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.
Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.
Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
|
|
|
#include <linux/mm_inline.h>
|
2024-02-22 14:04:20 +00:00
|
|
|
#include <linux/padata.h>
|
2008-08-06 19:04:54 +00:00
|
|
|
|
2005-06-22 00:14:44 +00:00
|
|
|
#include <asm/page.h>
|
2020-08-07 06:22:28 +00:00
|
|
|
#include <asm/pgalloc.h>
|
2012-07-31 23:42:03 +00:00
|
|
|
#include <asm/tlb.h>
|
2005-06-22 00:14:44 +00:00
|
|
|
|
2012-07-31 23:42:03 +00:00
|
|
|
#include <linux/io.h>
|
2005-06-22 00:14:44 +00:00
|
|
|
#include <linux/hugetlb.h>
|
2012-07-31 23:42:15 +00:00
|
|
|
#include <linux/hugetlb_cgroup.h>
|
2009-12-15 01:58:25 +00:00
|
|
|
#include <linux/node.h>
|
2018-02-01 00:20:48 +00:00
|
|
|
#include <linux/page_owner.h>
|
2006-03-22 08:08:40 +00:00
|
|
|
#include "internal.h"
|
2021-07-01 01:47:13 +00:00
|
|
|
#include "hugetlb_vmemmap.h"
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2012-07-31 23:42:10 +00:00
|
|
|
int hugetlb_max_hstate __read_mostly;
|
2008-07-24 04:27:42 +00:00
|
|
|
unsigned int default_hstate_idx;
|
|
|
|
struct hstate hstates[HUGE_MAX_HSTATE];
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
|
2020-07-24 04:15:30 +00:00
|
|
|
#ifdef CONFIG_CMA
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
static struct cma *hugetlb_cma[MAX_NUMNODES];
|
hugetlb: support node specified when using cma for gigantic hugepages
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:46 +00:00
|
|
|
static unsigned long hugetlb_cma_size_in_node[MAX_NUMNODES] __initdata;
|
2022-11-29 22:50:35 +00:00
|
|
|
static bool hugetlb_cma_folio(struct folio *folio, unsigned int order)
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
{
|
2022-11-29 22:50:35 +00:00
|
|
|
return cma_pages_valid(hugetlb_cma[folio_nid(folio)], &folio->page,
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
1 << order);
|
|
|
|
}
|
|
|
|
#else
|
2022-11-29 22:50:35 +00:00
|
|
|
static bool hugetlb_cma_folio(struct folio *folio, unsigned int order)
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
2020-07-24 04:15:30 +00:00
|
|
|
#endif
|
|
|
|
static unsigned long hugetlb_cma_size __initdata;
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
|
2024-02-22 14:04:21 +00:00
|
|
|
__initdata struct list_head huge_boot_pages[MAX_NUMNODES];
|
2008-07-24 04:27:52 +00:00
|
|
|
|
2008-07-24 04:27:42 +00:00
|
|
|
/* for command line parsing */
|
|
|
|
static struct hstate * __initdata parsed_hstate;
|
|
|
|
static unsigned long __initdata default_hstate_max_huge_pages;
|
2016-05-20 00:11:04 +00:00
|
|
|
static bool __initdata parsed_valid_hugepagesz = true;
|
2020-06-03 23:00:46 +00:00
|
|
|
static bool __initdata parsed_default_hugepagesz;
|
2021-11-05 20:43:28 +00:00
|
|
|
static unsigned int default_hugepages_in_node[MAX_NUMNODES] __initdata;
|
2008-07-24 04:27:42 +00:00
|
|
|
|
[PATCH] hugepage: serialize hugepage allocation and instantiation
Currently, no lock or mutex is held between allocating a hugepage and
inserting it into the pagetables / page cache. When we do go to insert the
page into pagetables or page cache, we recheck and may free the newly
allocated hugepage. However, since the number of hugepages in the system
is strictly limited, and it's usualy to want to use all of them, this can
still lead to spurious allocation failures.
For example, suppose two processes are both mapping (MAP_SHARED) the same
hugepage file, large enough to consume the entire available hugepage pool.
If they race instantiating the last page in the mapping, they will both
attempt to allocate the last available hugepage. One will fail, of course,
returning OOM from the fault and thus causing the process to be killed,
despite the fact that the entire mapping can, in fact, be instantiated.
The patch fixes this race by the simple method of adding a (sleeping) mutex
to serialize the hugepage fault path between allocation and insertion into
pagetables and/or page cache. It would be possible to avoid the
serialization by catching the allocation failures, waiting on some
condition, then rechecking to see if someone else has instantiated the page
for us. Given the likely frequency of hugepage instantiations, it seems
very doubtful it's worth the extra complexity.
This patch causes no regression on the libhugetlbfs testsuite, and one
test, which can trigger this race now passes where it previously failed.
Actually, the test still sometimes fails, though less often and only as a
shmat() failure, rather processes getting OOM killed by the VM. The dodgy
heuristic tests in fs/hugetlbfs/inode.c for whether there's enough hugepage
space aren't protected by the new mutex, and would be ugly to do so, so
there's still a race there. Another patch to replace those tests with
something saner for this reason as well as others coming...
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 08:08:53 +00:00
|
|
|
/*
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:59 +00:00
|
|
|
* Protects updates to hugepage_freelists, hugepage_activelist, nr_huge_pages,
|
|
|
|
* free_huge_pages, and surplus_huge_pages.
|
[PATCH] hugepage: serialize hugepage allocation and instantiation
Currently, no lock or mutex is held between allocating a hugepage and
inserting it into the pagetables / page cache. When we do go to insert the
page into pagetables or page cache, we recheck and may free the newly
allocated hugepage. However, since the number of hugepages in the system
is strictly limited, and it's usualy to want to use all of them, this can
still lead to spurious allocation failures.
For example, suppose two processes are both mapping (MAP_SHARED) the same
hugepage file, large enough to consume the entire available hugepage pool.
If they race instantiating the last page in the mapping, they will both
attempt to allocate the last available hugepage. One will fail, of course,
returning OOM from the fault and thus causing the process to be killed,
despite the fact that the entire mapping can, in fact, be instantiated.
The patch fixes this race by the simple method of adding a (sleeping) mutex
to serialize the hugepage fault path between allocation and insertion into
pagetables and/or page cache. It would be possible to avoid the
serialization by catching the allocation failures, waiting on some
condition, then rechecking to see if someone else has instantiated the page
for us. Given the likely frequency of hugepage instantiations, it seems
very doubtful it's worth the extra complexity.
This patch causes no regression on the libhugetlbfs testsuite, and one
test, which can trigger this race now passes where it previously failed.
Actually, the test still sometimes fails, though less often and only as a
shmat() failure, rather processes getting OOM killed by the VM. The dodgy
heuristic tests in fs/hugetlbfs/inode.c for whether there's enough hugepage
space aren't protected by the new mutex, and would be ugly to do so, so
there's still a race there. Another patch to replace those tests with
something saner for this reason as well as others coming...
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 08:08:53 +00:00
|
|
|
*/
|
2012-07-31 23:42:10 +00:00
|
|
|
DEFINE_SPINLOCK(hugetlb_lock);
|
2005-11-22 05:32:28 +00:00
|
|
|
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
/*
|
|
|
|
* Serializes faults on the same logical page. This is used to
|
|
|
|
* prevent spurious OOMs when the hugepage pool is fully utilized.
|
|
|
|
*/
|
|
|
|
static int num_fault_mutexes;
|
2015-09-08 22:01:35 +00:00
|
|
|
struct mutex *hugetlb_fault_mutex_table ____cacheline_aligned_in_smp;
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
|
2015-04-15 23:13:42 +00:00
|
|
|
/* Forward declaration */
|
|
|
|
static int hugetlb_acct_memory(struct hstate *h, long delta);
|
2022-09-14 22:18:07 +00:00
|
|
|
static void hugetlb_vma_lock_free(struct vm_area_struct *vma);
|
|
|
|
static void hugetlb_vma_lock_alloc(struct vm_area_struct *vma);
|
2022-10-05 01:17:06 +00:00
|
|
|
static void __hugetlb_vma_unlock_write_free(struct vm_area_struct *vma);
|
2023-01-04 23:19:10 +00:00
|
|
|
static void hugetlb_unshare_pmds(struct vm_area_struct *vma,
|
|
|
|
unsigned long start, unsigned long end);
|
2023-10-06 03:59:07 +00:00
|
|
|
static struct resv_map *vma_resv_map(struct vm_area_struct *vma);
|
2015-04-15 23:13:42 +00:00
|
|
|
|
2021-02-24 20:07:05 +00:00
|
|
|
static inline bool subpool_is_free(struct hugepage_subpool *spool)
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
{
|
2021-02-24 20:07:05 +00:00
|
|
|
if (spool->count)
|
|
|
|
return false;
|
|
|
|
if (spool->max_hpages != -1)
|
|
|
|
return spool->used_hpages == 0;
|
|
|
|
if (spool->min_hpages != -1)
|
|
|
|
return spool->rsv_hpages == spool->min_hpages;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
static inline void unlock_or_release_subpool(struct hugepage_subpool *spool,
|
|
|
|
unsigned long irq_flags)
|
2021-02-24 20:07:05 +00:00
|
|
|
{
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irqrestore(&spool->lock, irq_flags);
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
|
|
|
|
/* If no pages are used, and no other handles to the subpool
|
2020-06-04 23:49:07 +00:00
|
|
|
* remain, give up any reservations based on minimum size and
|
2015-04-15 23:13:42 +00:00
|
|
|
* free the subpool */
|
2021-02-24 20:07:05 +00:00
|
|
|
if (subpool_is_free(spool)) {
|
2015-04-15 23:13:42 +00:00
|
|
|
if (spool->min_hpages != -1)
|
|
|
|
hugetlb_acct_memory(spool->hstate,
|
|
|
|
-spool->min_hpages);
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
kfree(spool);
|
2015-04-15 23:13:42 +00:00
|
|
|
}
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
}
|
|
|
|
|
2015-04-15 23:13:42 +00:00
|
|
|
struct hugepage_subpool *hugepage_new_subpool(struct hstate *h, long max_hpages,
|
|
|
|
long min_hpages)
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
{
|
|
|
|
struct hugepage_subpool *spool;
|
|
|
|
|
hugetlbfs: add minimum size tracking fields to subpool structure
hugetlbfs allocates huge pages from the global pool as needed. Even if
the global pool contains a sufficient number pages for the filesystem size
at mount time, those global pages could be grabbed for some other use. As
a result, filesystem huge page allocations may fail due to lack of pages.
Applications such as a database want to use huge pages for performance
reasons. hugetlbfs filesystem semantics with ownership and modes work
well to manage access to a pool of huge pages. However, the application
would like some reasonable assurance that allocations will not fail due to
a lack of huge pages. At application startup time, the application would
like to configure itself to use a specific number of huge pages. Before
starting, the application can check to make sure that enough huge pages
exist in the system global pools. However, there are no guarantees that
those pages will be available when needed by the application. What the
application wants is exclusive use of a subset of huge pages.
Add a new hugetlbfs mount option 'min_size=<value>' to indicate that the
specified number of pages will be available for use by the filesystem. At
mount time, this number of huge pages will be reserved for exclusive use
of the filesystem. If there is not a sufficient number of free pages, the
mount will fail. As pages are allocated to and freeed from the
filesystem, the number of reserved pages is adjusted so that the specified
minimum is maintained.
This patch (of 4):
Add a field to the subpool structure to indicate the minimimum number of
huge pages to always be used by this subpool. This minimum count includes
allocated pages as well as reserved pages. If the minimum number of pages
for the subpool have not been allocated, pages are reserved up to this
minimum. An additional field (rsv_hpages) is used to track the number of
pages reserved to meet this minimum size. The hstate pointer in the
subpool is convenient to have when reserving and unreserving the pages.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 23:13:36 +00:00
|
|
|
spool = kzalloc(sizeof(*spool), GFP_KERNEL);
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
if (!spool)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
spin_lock_init(&spool->lock);
|
|
|
|
spool->count = 1;
|
2015-04-15 23:13:42 +00:00
|
|
|
spool->max_hpages = max_hpages;
|
|
|
|
spool->hstate = h;
|
|
|
|
spool->min_hpages = min_hpages;
|
|
|
|
|
|
|
|
if (min_hpages != -1 && hugetlb_acct_memory(h, min_hpages)) {
|
|
|
|
kfree(spool);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
spool->rsv_hpages = min_hpages;
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
|
|
|
|
return spool;
|
|
|
|
}
|
|
|
|
|
|
|
|
void hugepage_put_subpool(struct hugepage_subpool *spool)
|
|
|
|
{
|
2021-05-05 01:35:07 +00:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&spool->lock, flags);
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
BUG_ON(!spool->count);
|
|
|
|
spool->count--;
|
2021-05-05 01:35:07 +00:00
|
|
|
unlock_or_release_subpool(spool, flags);
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
}
|
|
|
|
|
2015-04-15 23:13:39 +00:00
|
|
|
/*
|
|
|
|
* Subpool accounting for allocating and reserving pages.
|
|
|
|
* Return -ENOMEM if there are not enough resources to satisfy the
|
2020-08-12 01:32:59 +00:00
|
|
|
* request. Otherwise, return the number of pages by which the
|
2015-04-15 23:13:39 +00:00
|
|
|
* global pools must be adjusted (upward). The returned value may
|
|
|
|
* only be different than the passed value (delta) in the case where
|
2020-06-04 23:49:07 +00:00
|
|
|
* a subpool minimum size must be maintained.
|
2015-04-15 23:13:39 +00:00
|
|
|
*/
|
|
|
|
static long hugepage_subpool_get_pages(struct hugepage_subpool *spool,
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
long delta)
|
|
|
|
{
|
2015-04-15 23:13:39 +00:00
|
|
|
long ret = delta;
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
|
|
|
|
if (!spool)
|
2015-04-15 23:13:39 +00:00
|
|
|
return ret;
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&spool->lock);
|
2015-04-15 23:13:39 +00:00
|
|
|
|
|
|
|
if (spool->max_hpages != -1) { /* maximum size accounting */
|
|
|
|
if ((spool->used_hpages + delta) <= spool->max_hpages)
|
|
|
|
spool->used_hpages += delta;
|
|
|
|
else {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto unlock_ret;
|
|
|
|
}
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
}
|
|
|
|
|
2016-05-20 00:11:01 +00:00
|
|
|
/* minimum size accounting */
|
|
|
|
if (spool->min_hpages != -1 && spool->rsv_hpages) {
|
2015-04-15 23:13:39 +00:00
|
|
|
if (delta > spool->rsv_hpages) {
|
|
|
|
/*
|
|
|
|
* Asking for more reserves than those already taken on
|
|
|
|
* behalf of subpool. Return difference.
|
|
|
|
*/
|
|
|
|
ret = delta - spool->rsv_hpages;
|
|
|
|
spool->rsv_hpages = 0;
|
|
|
|
} else {
|
|
|
|
ret = 0; /* reserves already accounted for */
|
|
|
|
spool->rsv_hpages -= delta;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
unlock_ret:
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&spool->lock);
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2015-04-15 23:13:39 +00:00
|
|
|
/*
|
|
|
|
* Subpool accounting for freeing and unreserving pages.
|
|
|
|
* Return the number of global page reservations that must be dropped.
|
|
|
|
* The return value may only be different than the passed value (delta)
|
|
|
|
* in the case where a subpool minimum size must be maintained.
|
|
|
|
*/
|
|
|
|
static long hugepage_subpool_put_pages(struct hugepage_subpool *spool,
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
long delta)
|
|
|
|
{
|
2015-04-15 23:13:39 +00:00
|
|
|
long ret = delta;
|
2021-05-05 01:35:07 +00:00
|
|
|
unsigned long flags;
|
2015-04-15 23:13:39 +00:00
|
|
|
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
if (!spool)
|
2015-04-15 23:13:39 +00:00
|
|
|
return delta;
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irqsave(&spool->lock, flags);
|
2015-04-15 23:13:39 +00:00
|
|
|
|
|
|
|
if (spool->max_hpages != -1) /* maximum size accounting */
|
|
|
|
spool->used_hpages -= delta;
|
|
|
|
|
2016-05-20 00:11:01 +00:00
|
|
|
/* minimum size accounting */
|
|
|
|
if (spool->min_hpages != -1 && spool->used_hpages < spool->min_hpages) {
|
2015-04-15 23:13:39 +00:00
|
|
|
if (spool->rsv_hpages + delta <= spool->min_hpages)
|
|
|
|
ret = 0;
|
|
|
|
else
|
|
|
|
ret = spool->rsv_hpages + delta - spool->min_hpages;
|
|
|
|
|
|
|
|
spool->rsv_hpages += delta;
|
|
|
|
if (spool->rsv_hpages > spool->min_hpages)
|
|
|
|
spool->rsv_hpages = spool->min_hpages;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If hugetlbfs_put_super couldn't free spool due to an outstanding
|
|
|
|
* quota reference, free it now.
|
|
|
|
*/
|
2021-05-05 01:35:07 +00:00
|
|
|
unlock_or_release_subpool(spool, flags);
|
2015-04-15 23:13:39 +00:00
|
|
|
|
|
|
|
return ret;
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct hugepage_subpool *subpool_inode(struct inode *inode)
|
|
|
|
{
|
|
|
|
return HUGETLBFS_SB(inode->i_sb)->spool;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct hugepage_subpool *subpool_vma(struct vm_area_struct *vma)
|
|
|
|
{
|
2013-01-23 22:07:38 +00:00
|
|
|
return subpool_inode(file_inode(vma->vm_file));
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
}
|
|
|
|
|
2022-12-12 23:50:41 +00:00
|
|
|
/*
|
|
|
|
* hugetlb vma_lock helper routines
|
|
|
|
*/
|
|
|
|
void hugetlb_vma_lock_read(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
if (__vma_shareable_lock(vma)) {
|
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
|
|
|
|
|
|
|
down_read(&vma_lock->rw_sema);
|
2023-10-06 03:59:07 +00:00
|
|
|
} else if (__vma_private_lock(vma)) {
|
|
|
|
struct resv_map *resv_map = vma_resv_map(vma);
|
|
|
|
|
|
|
|
down_read(&resv_map->rw_sema);
|
2022-12-12 23:50:41 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void hugetlb_vma_unlock_read(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
if (__vma_shareable_lock(vma)) {
|
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
|
|
|
|
|
|
|
up_read(&vma_lock->rw_sema);
|
2023-10-06 03:59:07 +00:00
|
|
|
} else if (__vma_private_lock(vma)) {
|
|
|
|
struct resv_map *resv_map = vma_resv_map(vma);
|
|
|
|
|
|
|
|
up_read(&resv_map->rw_sema);
|
2022-12-12 23:50:41 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void hugetlb_vma_lock_write(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
if (__vma_shareable_lock(vma)) {
|
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
|
|
|
|
|
|
|
down_write(&vma_lock->rw_sema);
|
2023-10-06 03:59:07 +00:00
|
|
|
} else if (__vma_private_lock(vma)) {
|
|
|
|
struct resv_map *resv_map = vma_resv_map(vma);
|
|
|
|
|
|
|
|
down_write(&resv_map->rw_sema);
|
2022-12-12 23:50:41 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void hugetlb_vma_unlock_write(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
if (__vma_shareable_lock(vma)) {
|
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
|
|
|
|
|
|
|
up_write(&vma_lock->rw_sema);
|
2023-10-06 03:59:07 +00:00
|
|
|
} else if (__vma_private_lock(vma)) {
|
|
|
|
struct resv_map *resv_map = vma_resv_map(vma);
|
|
|
|
|
|
|
|
up_write(&resv_map->rw_sema);
|
2022-12-12 23:50:41 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int hugetlb_vma_trylock_write(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
|
2023-10-06 03:59:07 +00:00
|
|
|
if (__vma_shareable_lock(vma)) {
|
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
2022-12-12 23:50:41 +00:00
|
|
|
|
2023-10-06 03:59:07 +00:00
|
|
|
return down_write_trylock(&vma_lock->rw_sema);
|
|
|
|
} else if (__vma_private_lock(vma)) {
|
|
|
|
struct resv_map *resv_map = vma_resv_map(vma);
|
|
|
|
|
|
|
|
return down_write_trylock(&resv_map->rw_sema);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 1;
|
2022-12-12 23:50:41 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void hugetlb_vma_assert_locked(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
if (__vma_shareable_lock(vma)) {
|
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
|
|
|
|
|
|
|
lockdep_assert_held(&vma_lock->rw_sema);
|
2023-10-06 03:59:07 +00:00
|
|
|
} else if (__vma_private_lock(vma)) {
|
|
|
|
struct resv_map *resv_map = vma_resv_map(vma);
|
|
|
|
|
|
|
|
lockdep_assert_held(&resv_map->rw_sema);
|
2022-12-12 23:50:41 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void hugetlb_vma_lock_release(struct kref *kref)
|
|
|
|
{
|
|
|
|
struct hugetlb_vma_lock *vma_lock = container_of(kref,
|
|
|
|
struct hugetlb_vma_lock, refs);
|
|
|
|
|
|
|
|
kfree(vma_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __hugetlb_vma_unlock_write_put(struct hugetlb_vma_lock *vma_lock)
|
|
|
|
{
|
|
|
|
struct vm_area_struct *vma = vma_lock->vma;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* vma_lock structure may or not be released as a result of put,
|
|
|
|
* it certainly will no longer be attached to vma so clear pointer.
|
|
|
|
* Semaphore synchronizes access to vma_lock->vma field.
|
|
|
|
*/
|
|
|
|
vma_lock->vma = NULL;
|
|
|
|
vma->vm_private_data = NULL;
|
|
|
|
up_write(&vma_lock->rw_sema);
|
|
|
|
kref_put(&vma_lock->refs, hugetlb_vma_lock_release);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __hugetlb_vma_unlock_write_free(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
if (__vma_shareable_lock(vma)) {
|
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
|
|
|
|
|
|
|
__hugetlb_vma_unlock_write_put(vma_lock);
|
2023-10-06 03:59:07 +00:00
|
|
|
} else if (__vma_private_lock(vma)) {
|
|
|
|
struct resv_map *resv_map = vma_resv_map(vma);
|
|
|
|
|
|
|
|
/* no free for anon vmas, but still need to unlock */
|
|
|
|
up_write(&resv_map->rw_sema);
|
2022-12-12 23:50:41 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void hugetlb_vma_lock_free(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Only present in sharable vmas.
|
|
|
|
*/
|
|
|
|
if (!vma || !__vma_shareable_lock(vma))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (vma->vm_private_data) {
|
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
|
|
|
|
|
|
|
down_write(&vma_lock->rw_sema);
|
|
|
|
__hugetlb_vma_unlock_write_put(vma_lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void hugetlb_vma_lock_alloc(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
struct hugetlb_vma_lock *vma_lock;
|
|
|
|
|
|
|
|
/* Only establish in (flags) sharable vmas */
|
|
|
|
if (!vma || !(vma->vm_flags & VM_MAYSHARE))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Should never get here with non-NULL vm_private_data */
|
|
|
|
if (vma->vm_private_data)
|
|
|
|
return;
|
|
|
|
|
|
|
|
vma_lock = kmalloc(sizeof(*vma_lock), GFP_KERNEL);
|
|
|
|
if (!vma_lock) {
|
|
|
|
/*
|
|
|
|
* If we can not allocate structure, then vma can not
|
|
|
|
* participate in pmd sharing. This is only a possible
|
|
|
|
* performance enhancement and memory saving issue.
|
|
|
|
* However, the lock is also used to synchronize page
|
|
|
|
* faults with truncation. If the lock is not present,
|
|
|
|
* unlikely races could leave pages in a file past i_size
|
|
|
|
* until the file is removed. Warn in the unlikely case of
|
|
|
|
* allocation failure.
|
|
|
|
*/
|
|
|
|
pr_warn_once("HugeTLB: unable to allocate vma specific lock\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
kref_init(&vma_lock->refs);
|
|
|
|
init_rwsem(&vma_lock->rw_sema);
|
|
|
|
vma_lock->vma = vma;
|
|
|
|
vma->vm_private_data = vma_lock;
|
|
|
|
}
|
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
/* Helper that removes a struct file_region from the resv_map cache and returns
|
|
|
|
* it for use.
|
|
|
|
*/
|
|
|
|
static struct file_region *
|
|
|
|
get_file_region_entry_from_cache(struct resv_map *resv, long from, long to)
|
|
|
|
{
|
2022-09-14 01:21:14 +00:00
|
|
|
struct file_region *nrg;
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
|
|
|
|
VM_BUG_ON(resv->region_cache_count <= 0);
|
|
|
|
|
|
|
|
resv->region_cache_count--;
|
|
|
|
nrg = list_first_entry(&resv->region_cache, struct file_region, link);
|
|
|
|
list_del(&nrg->link);
|
|
|
|
|
|
|
|
nrg->from = from;
|
|
|
|
nrg->to = to;
|
|
|
|
|
|
|
|
return nrg;
|
|
|
|
}
|
|
|
|
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
static void copy_hugetlb_cgroup_uncharge_info(struct file_region *nrg,
|
|
|
|
struct file_region *rg)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_CGROUP_HUGETLB
|
|
|
|
nrg->reservation_counter = rg->reservation_counter;
|
|
|
|
nrg->css = rg->css;
|
|
|
|
if (rg->css)
|
|
|
|
css_get(rg->css);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Helper that records hugetlb_cgroup uncharge info. */
|
|
|
|
static void record_hugetlb_cgroup_uncharge_info(struct hugetlb_cgroup *h_cg,
|
|
|
|
struct hstate *h,
|
|
|
|
struct resv_map *resv,
|
|
|
|
struct file_region *nrg)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_CGROUP_HUGETLB
|
|
|
|
if (h_cg) {
|
|
|
|
nrg->reservation_counter =
|
|
|
|
&h_cg->rsvd_hugepage[hstate_index(h)];
|
|
|
|
nrg->css = &h_cg->css;
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
/*
|
|
|
|
* The caller will hold exactly one h_cg->css reference for the
|
|
|
|
* whole contiguous reservation region. But this area might be
|
|
|
|
* scattered when there are already some file_regions reside in
|
|
|
|
* it. As a result, many file_regions may share only one css
|
|
|
|
* reference. In order to ensure that one file_region must hold
|
|
|
|
* exactly one h_cg->css reference, we should do css_get for
|
|
|
|
* each file_region and leave the reference held by caller
|
|
|
|
* untouched.
|
|
|
|
*/
|
|
|
|
css_get(&h_cg->css);
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
if (!resv->pages_per_hpage)
|
|
|
|
resv->pages_per_hpage = pages_per_huge_page(h);
|
|
|
|
/* pages_per_hpage should be the same for all entries in
|
|
|
|
* a resv_map.
|
|
|
|
*/
|
|
|
|
VM_BUG_ON(resv->pages_per_hpage != pages_per_huge_page(h));
|
|
|
|
} else {
|
|
|
|
nrg->reservation_counter = NULL;
|
|
|
|
nrg->css = NULL;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
static void put_uncharge_info(struct file_region *rg)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_CGROUP_HUGETLB
|
|
|
|
if (rg->css)
|
|
|
|
css_put(rg->css);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
2020-04-02 04:11:35 +00:00
|
|
|
static bool has_same_uncharge_info(struct file_region *rg,
|
|
|
|
struct file_region *org)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_CGROUP_HUGETLB
|
2021-11-05 20:41:58 +00:00
|
|
|
return rg->reservation_counter == org->reservation_counter &&
|
2020-04-02 04:11:35 +00:00
|
|
|
rg->css == org->css;
|
|
|
|
|
|
|
|
#else
|
|
|
|
return true;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static void coalesce_file_region(struct resv_map *resv, struct file_region *rg)
|
|
|
|
{
|
2022-09-14 01:21:14 +00:00
|
|
|
struct file_region *nrg, *prg;
|
2020-04-02 04:11:35 +00:00
|
|
|
|
|
|
|
prg = list_prev_entry(rg, link);
|
|
|
|
if (&prg->link != &resv->regions && prg->to == rg->from &&
|
|
|
|
has_same_uncharge_info(prg, rg)) {
|
|
|
|
prg->to = rg->to;
|
|
|
|
|
|
|
|
list_del(&rg->link);
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
put_uncharge_info(rg);
|
2020-04-02 04:11:35 +00:00
|
|
|
kfree(rg);
|
|
|
|
|
2020-10-13 23:56:20 +00:00
|
|
|
rg = prg;
|
2020-04-02 04:11:35 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
nrg = list_next_entry(rg, link);
|
|
|
|
if (&nrg->link != &resv->regions && nrg->from == rg->to &&
|
|
|
|
has_same_uncharge_info(nrg, rg)) {
|
|
|
|
nrg->from = rg->from;
|
|
|
|
|
|
|
|
list_del(&rg->link);
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
put_uncharge_info(rg);
|
2020-04-02 04:11:35 +00:00
|
|
|
kfree(rg);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2021-03-13 05:07:18 +00:00
|
|
|
static inline long
|
2022-04-29 06:16:03 +00:00
|
|
|
hugetlb_resv_map_add(struct resv_map *map, struct list_head *rg, long from,
|
2021-03-13 05:07:18 +00:00
|
|
|
long to, struct hstate *h, struct hugetlb_cgroup *cg,
|
|
|
|
long *regions_needed)
|
|
|
|
{
|
|
|
|
struct file_region *nrg;
|
|
|
|
|
|
|
|
if (!regions_needed) {
|
|
|
|
nrg = get_file_region_entry_from_cache(map, from, to);
|
|
|
|
record_hugetlb_cgroup_uncharge_info(cg, h, map, nrg);
|
2022-04-29 06:16:03 +00:00
|
|
|
list_add(&nrg->link, rg);
|
2021-03-13 05:07:18 +00:00
|
|
|
coalesce_file_region(map, nrg);
|
|
|
|
} else
|
|
|
|
*regions_needed += 1;
|
|
|
|
|
|
|
|
return to - from;
|
|
|
|
}
|
|
|
|
|
2020-10-13 23:56:30 +00:00
|
|
|
/*
|
|
|
|
* Must be called with resv->lock held.
|
|
|
|
*
|
|
|
|
* Calling this with regions_needed != NULL will count the number of pages
|
|
|
|
* to be added but will not modify the linked list. And regions_needed will
|
|
|
|
* indicate the number of file_regions needed in the cache to carry out to add
|
|
|
|
* the regions for this range.
|
2019-12-01 01:56:59 +00:00
|
|
|
*/
|
|
|
|
static long add_reservation_in_range(struct resv_map *resv, long f, long t,
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
struct hugetlb_cgroup *h_cg,
|
2020-10-13 23:56:30 +00:00
|
|
|
struct hstate *h, long *regions_needed)
|
2019-12-01 01:56:59 +00:00
|
|
|
{
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
long add = 0;
|
2019-12-01 01:56:59 +00:00
|
|
|
struct list_head *head = &resv->regions;
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
long last_accounted_offset = f;
|
2022-04-29 06:16:03 +00:00
|
|
|
struct file_region *iter, *trg = NULL;
|
|
|
|
struct list_head *rg = NULL;
|
2019-12-01 01:56:59 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
if (regions_needed)
|
|
|
|
*regions_needed = 0;
|
2019-12-01 01:56:59 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
/* In this loop, we essentially handle an entry for the range
|
2022-04-29 06:16:03 +00:00
|
|
|
* [last_accounted_offset, iter->from), at every iteration, with some
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
* bounds checking.
|
|
|
|
*/
|
2022-04-29 06:16:03 +00:00
|
|
|
list_for_each_entry_safe(iter, trg, head, link) {
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
/* Skip irrelevant regions that start before our range. */
|
2022-04-29 06:16:03 +00:00
|
|
|
if (iter->from < f) {
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
/* If this region ends after the last accounted offset,
|
|
|
|
* then we need to update last_accounted_offset.
|
|
|
|
*/
|
2022-04-29 06:16:03 +00:00
|
|
|
if (iter->to > last_accounted_offset)
|
|
|
|
last_accounted_offset = iter->to;
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
continue;
|
|
|
|
}
|
2019-12-01 01:56:59 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
/* When we find a region that starts beyond our range, we've
|
|
|
|
* finished.
|
|
|
|
*/
|
2022-04-29 06:16:03 +00:00
|
|
|
if (iter->from >= t) {
|
|
|
|
rg = iter->link.prev;
|
2019-12-01 01:56:59 +00:00
|
|
|
break;
|
2022-04-29 06:16:03 +00:00
|
|
|
}
|
2019-12-01 01:56:59 +00:00
|
|
|
|
2022-04-29 06:16:03 +00:00
|
|
|
/* Add an entry for last_accounted_offset -> iter->from, and
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
* update last_accounted_offset.
|
|
|
|
*/
|
2022-04-29 06:16:03 +00:00
|
|
|
if (iter->from > last_accounted_offset)
|
|
|
|
add += hugetlb_resv_map_add(resv, iter->link.prev,
|
2021-03-13 05:07:18 +00:00
|
|
|
last_accounted_offset,
|
2022-04-29 06:16:03 +00:00
|
|
|
iter->from, h, h_cg,
|
2021-03-13 05:07:18 +00:00
|
|
|
regions_needed);
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
|
2022-04-29 06:16:03 +00:00
|
|
|
last_accounted_offset = iter->to;
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Handle the case where our range extends beyond
|
|
|
|
* last_accounted_offset.
|
|
|
|
*/
|
2022-04-29 06:16:03 +00:00
|
|
|
if (!rg)
|
|
|
|
rg = head->prev;
|
2021-03-13 05:07:18 +00:00
|
|
|
if (last_accounted_offset < t)
|
|
|
|
add += hugetlb_resv_map_add(resv, rg, last_accounted_offset,
|
|
|
|
t, h, h_cg, regions_needed);
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
|
|
|
|
return add;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Must be called with resv->lock acquired. Will drop lock to allocate entries.
|
|
|
|
*/
|
|
|
|
static int allocate_file_region_entries(struct resv_map *resv,
|
|
|
|
int regions_needed)
|
|
|
|
__must_hold(&resv->lock)
|
|
|
|
{
|
2022-09-01 12:00:23 +00:00
|
|
|
LIST_HEAD(allocated_regions);
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
int to_allocate = 0, i = 0;
|
|
|
|
struct file_region *trg = NULL, *rg = NULL;
|
|
|
|
|
|
|
|
VM_BUG_ON(regions_needed < 0);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check for sufficient descriptors in the cache to accommodate
|
|
|
|
* the number of in progress add operations plus regions_needed.
|
|
|
|
*
|
|
|
|
* This is a while loop because when we drop the lock, some other call
|
|
|
|
* to region_add or region_del may have consumed some region_entries,
|
|
|
|
* so we keep looping here until we finally have enough entries for
|
|
|
|
* (adds_in_progress + regions_needed).
|
|
|
|
*/
|
|
|
|
while (resv->region_cache_count <
|
|
|
|
(resv->adds_in_progress + regions_needed)) {
|
|
|
|
to_allocate = resv->adds_in_progress + regions_needed -
|
|
|
|
resv->region_cache_count;
|
|
|
|
|
|
|
|
/* At this point, we should have enough entries in the cache
|
2021-05-07 01:06:47 +00:00
|
|
|
* for all the existing adds_in_progress. We should only be
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
* needing to allocate for regions_needed.
|
2019-12-01 01:56:59 +00:00
|
|
|
*/
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
VM_BUG_ON(resv->region_cache_count < resv->adds_in_progress);
|
|
|
|
|
|
|
|
spin_unlock(&resv->lock);
|
|
|
|
for (i = 0; i < to_allocate; i++) {
|
|
|
|
trg = kmalloc(sizeof(*trg), GFP_KERNEL);
|
|
|
|
if (!trg)
|
|
|
|
goto out_of_memory;
|
|
|
|
list_add(&trg->link, &allocated_regions);
|
2019-12-01 01:56:59 +00:00
|
|
|
}
|
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
spin_lock(&resv->lock);
|
|
|
|
|
2020-10-13 23:56:27 +00:00
|
|
|
list_splice(&allocated_regions, &resv->region_cache);
|
|
|
|
resv->region_cache_count += to_allocate;
|
2019-12-01 01:56:59 +00:00
|
|
|
}
|
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
return 0;
|
2019-12-01 01:56:59 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
out_of_memory:
|
|
|
|
list_for_each_entry_safe(rg, trg, &allocated_regions, link) {
|
|
|
|
list_del(&rg->link);
|
|
|
|
kfree(rg);
|
|
|
|
}
|
|
|
|
return -ENOMEM;
|
2019-12-01 01:56:59 +00:00
|
|
|
}
|
|
|
|
|
2015-06-24 23:57:52 +00:00
|
|
|
/*
|
|
|
|
* Add the huge page range represented by [f, t) to the reserve
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
* map. Regions will be taken from the cache to fill in this range.
|
|
|
|
* Sufficient regions should exist in the cache due to the previous
|
|
|
|
* call to region_chg with the same range, but in some cases the cache will not
|
|
|
|
* have sufficient entries due to races with other code doing region_add or
|
|
|
|
* region_del. The extra needed entries will be allocated.
|
2015-06-24 23:57:55 +00:00
|
|
|
*
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
* regions_needed is the out value provided by a previous call to region_chg.
|
|
|
|
*
|
|
|
|
* Return the number of new huge pages added to the map. This number is greater
|
|
|
|
* than or equal to zero. If file_region entries needed to be allocated for
|
2020-06-04 23:49:07 +00:00
|
|
|
* this operation and we were not able to allocate, it returns -ENOMEM.
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
* region_add of regions of length 1 never allocate file_regions and cannot
|
|
|
|
* fail; region_chg will always allocate at least 1 entry and a region_add for
|
|
|
|
* 1 page will only require at most 1 entry.
|
2015-06-24 23:57:52 +00:00
|
|
|
*/
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
static long region_add(struct resv_map *resv, long f, long t,
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
long in_regions_needed, struct hstate *h,
|
|
|
|
struct hugetlb_cgroup *h_cg)
|
2008-07-24 04:27:29 +00:00
|
|
|
{
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
long add = 0, actual_regions_needed = 0;
|
2008-07-24 04:27:29 +00:00
|
|
|
|
2014-04-03 21:47:27 +00:00
|
|
|
spin_lock(&resv->lock);
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
retry:
|
|
|
|
|
|
|
|
/* Count how many regions are actually needed to execute this add. */
|
2020-10-13 23:56:30 +00:00
|
|
|
add_reservation_in_range(resv, f, t, NULL, NULL,
|
|
|
|
&actual_regions_needed);
|
2008-07-24 04:27:29 +00:00
|
|
|
|
2015-09-08 22:01:28 +00:00
|
|
|
/*
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
* Check for sufficient descriptors in the cache to accommodate
|
|
|
|
* this add operation. Note that actual_regions_needed may be greater
|
|
|
|
* than in_regions_needed, as the resv_map may have been modified since
|
|
|
|
* the region_chg call. In this case, we need to make sure that we
|
|
|
|
* allocate extra entries, such that we have enough for all the
|
|
|
|
* existing adds_in_progress, plus the excess needed for this
|
|
|
|
* operation.
|
2015-09-08 22:01:28 +00:00
|
|
|
*/
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
if (actual_regions_needed > in_regions_needed &&
|
|
|
|
resv->region_cache_count <
|
|
|
|
resv->adds_in_progress +
|
|
|
|
(actual_regions_needed - in_regions_needed)) {
|
|
|
|
/* region_add operation of range 1 should never need to
|
|
|
|
* allocate file_region entries.
|
|
|
|
*/
|
|
|
|
VM_BUG_ON(t - f <= 1);
|
2015-09-08 22:01:28 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
if (allocate_file_region_entries(
|
|
|
|
resv, actual_regions_needed - in_regions_needed)) {
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2015-09-08 22:01:28 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
goto retry;
|
2015-09-08 22:01:28 +00:00
|
|
|
}
|
|
|
|
|
2020-10-13 23:56:30 +00:00
|
|
|
add = add_reservation_in_range(resv, f, t, h_cg, h, NULL);
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
|
|
|
|
resv->adds_in_progress -= in_regions_needed;
|
2015-06-24 23:57:55 +00:00
|
|
|
|
2014-04-03 21:47:27 +00:00
|
|
|
spin_unlock(&resv->lock);
|
2015-06-24 23:57:55 +00:00
|
|
|
return add;
|
2008-07-24 04:27:29 +00:00
|
|
|
}
|
|
|
|
|
2015-06-24 23:57:52 +00:00
|
|
|
/*
|
|
|
|
* Examine the existing reserve map and determine how many
|
|
|
|
* huge pages in the specified range [f, t) are NOT currently
|
|
|
|
* represented. This routine is called before a subsequent
|
|
|
|
* call to region_add that will actually modify the reserve
|
|
|
|
* map to add the specified range [f, t). region_chg does
|
|
|
|
* not change the number of huge pages represented by the
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
* map. A number of new file_region structures is added to the cache as a
|
|
|
|
* placeholder, for the subsequent region_add call to use. At least 1
|
|
|
|
* file_region structure is added.
|
|
|
|
*
|
|
|
|
* out_regions_needed is the number of regions added to the
|
|
|
|
* resv->adds_in_progress. This value needs to be provided to a follow up call
|
|
|
|
* to region_add or region_abort for proper accounting.
|
2015-09-08 22:01:28 +00:00
|
|
|
*
|
|
|
|
* Returns the number of huge pages that need to be added to the existing
|
|
|
|
* reservation map for the range [f, t). This number is greater or equal to
|
|
|
|
* zero. -ENOMEM is returned if a new file_region structure or cache entry
|
|
|
|
* is needed and can not be allocated.
|
2015-06-24 23:57:52 +00:00
|
|
|
*/
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
static long region_chg(struct resv_map *resv, long f, long t,
|
|
|
|
long *out_regions_needed)
|
2008-07-24 04:27:29 +00:00
|
|
|
{
|
|
|
|
long chg = 0;
|
|
|
|
|
2014-04-03 21:47:27 +00:00
|
|
|
spin_lock(&resv->lock);
|
2015-09-08 22:01:28 +00:00
|
|
|
|
2020-10-13 23:56:30 +00:00
|
|
|
/* Count how many hugepages in this range are NOT represented. */
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
chg = add_reservation_in_range(resv, f, t, NULL, NULL,
|
2020-10-13 23:56:30 +00:00
|
|
|
out_regions_needed);
|
2015-09-08 22:01:28 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
if (*out_regions_needed == 0)
|
|
|
|
*out_regions_needed = 1;
|
2015-09-08 22:01:28 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
if (allocate_file_region_entries(resv, *out_regions_needed))
|
|
|
|
return -ENOMEM;
|
2015-09-08 22:01:28 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
resv->adds_in_progress += *out_regions_needed;
|
2014-04-03 21:47:27 +00:00
|
|
|
|
|
|
|
spin_unlock(&resv->lock);
|
2008-07-24 04:27:29 +00:00
|
|
|
return chg;
|
|
|
|
}
|
|
|
|
|
2015-09-08 22:01:28 +00:00
|
|
|
/*
|
|
|
|
* Abort the in progress add operation. The adds_in_progress field
|
|
|
|
* of the resv_map keeps track of the operations in progress between
|
|
|
|
* calls to region_chg and region_add. Operations are sometimes
|
|
|
|
* aborted after the call to region_chg. In such cases, region_abort
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
* is called to decrement the adds_in_progress counter. regions_needed
|
|
|
|
* is the value returned by the region_chg call, it is used to decrement
|
|
|
|
* the adds_in_progress counter.
|
2015-09-08 22:01:28 +00:00
|
|
|
*
|
|
|
|
* NOTE: The range arguments [f, t) are not needed or used in this
|
|
|
|
* routine. They are kept to make reading the calling code easier as
|
|
|
|
* arguments will match the associated region_chg call.
|
|
|
|
*/
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
static void region_abort(struct resv_map *resv, long f, long t,
|
|
|
|
long regions_needed)
|
2015-09-08 22:01:28 +00:00
|
|
|
{
|
|
|
|
spin_lock(&resv->lock);
|
|
|
|
VM_BUG_ON(!resv->region_cache_count);
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
resv->adds_in_progress -= regions_needed;
|
2015-09-08 22:01:28 +00:00
|
|
|
spin_unlock(&resv->lock);
|
|
|
|
}
|
|
|
|
|
2015-06-24 23:57:52 +00:00
|
|
|
/*
|
2015-09-08 22:01:31 +00:00
|
|
|
* Delete the specified range [f, t) from the reserve map. If the
|
|
|
|
* t parameter is LONG_MAX, this indicates that ALL regions after f
|
|
|
|
* should be deleted. Locate the regions which intersect [f, t)
|
|
|
|
* and either trim, delete or split the existing regions.
|
|
|
|
*
|
|
|
|
* Returns the number of huge pages deleted from the reserve map.
|
|
|
|
* In the normal case, the return value is zero or more. In the
|
|
|
|
* case where a region must be split, a new region descriptor must
|
|
|
|
* be allocated. If the allocation fails, -ENOMEM will be returned.
|
|
|
|
* NOTE: If the parameter t == LONG_MAX, then we will never split
|
|
|
|
* a region and possibly return -ENOMEM. Callers specifying
|
|
|
|
* t == LONG_MAX do not need to check for -ENOMEM error.
|
2015-06-24 23:57:52 +00:00
|
|
|
*/
|
2015-09-08 22:01:31 +00:00
|
|
|
static long region_del(struct resv_map *resv, long f, long t)
|
2008-07-24 04:27:29 +00:00
|
|
|
{
|
2014-04-03 21:47:26 +00:00
|
|
|
struct list_head *head = &resv->regions;
|
2008-07-24 04:27:29 +00:00
|
|
|
struct file_region *rg, *trg;
|
2015-09-08 22:01:31 +00:00
|
|
|
struct file_region *nrg = NULL;
|
|
|
|
long del = 0;
|
2008-07-24 04:27:29 +00:00
|
|
|
|
2015-09-08 22:01:31 +00:00
|
|
|
retry:
|
2014-04-03 21:47:27 +00:00
|
|
|
spin_lock(&resv->lock);
|
2015-09-08 22:01:31 +00:00
|
|
|
list_for_each_entry_safe(rg, trg, head, link) {
|
2015-12-11 21:40:52 +00:00
|
|
|
/*
|
|
|
|
* Skip regions before the range to be deleted. file_region
|
|
|
|
* ranges are normally of the form [from, to). However, there
|
|
|
|
* may be a "placeholder" entry in the map which is of the form
|
|
|
|
* (from, to) with from == to. Check for placeholder entries
|
|
|
|
* at the beginning of the range to be deleted.
|
|
|
|
*/
|
|
|
|
if (rg->to <= f && (rg->to != rg->from || rg->to != f))
|
2015-09-08 22:01:31 +00:00
|
|
|
continue;
|
2015-12-11 21:40:52 +00:00
|
|
|
|
2015-09-08 22:01:31 +00:00
|
|
|
if (rg->from >= t)
|
2008-07-24 04:27:29 +00:00
|
|
|
break;
|
|
|
|
|
2015-09-08 22:01:31 +00:00
|
|
|
if (f > rg->from && t < rg->to) { /* Must split region */
|
|
|
|
/*
|
|
|
|
* Check for an entry in the cache before dropping
|
|
|
|
* lock and attempting allocation.
|
|
|
|
*/
|
|
|
|
if (!nrg &&
|
|
|
|
resv->region_cache_count > resv->adds_in_progress) {
|
|
|
|
nrg = list_first_entry(&resv->region_cache,
|
|
|
|
struct file_region,
|
|
|
|
link);
|
|
|
|
list_del(&nrg->link);
|
|
|
|
resv->region_cache_count--;
|
|
|
|
}
|
2008-07-24 04:27:29 +00:00
|
|
|
|
2015-09-08 22:01:31 +00:00
|
|
|
if (!nrg) {
|
|
|
|
spin_unlock(&resv->lock);
|
|
|
|
nrg = kmalloc(sizeof(*nrg), GFP_KERNEL);
|
|
|
|
if (!nrg)
|
|
|
|
return -ENOMEM;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
|
|
|
del += t - f;
|
2020-11-02 01:07:27 +00:00
|
|
|
hugetlb_cgroup_uncharge_file_region(
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
resv, rg, t - f, false);
|
2015-09-08 22:01:31 +00:00
|
|
|
|
|
|
|
/* New entry for end of split region */
|
|
|
|
nrg->from = t;
|
|
|
|
nrg->to = rg->to;
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
|
|
|
|
copy_hugetlb_cgroup_uncharge_info(nrg, rg);
|
|
|
|
|
2015-09-08 22:01:31 +00:00
|
|
|
INIT_LIST_HEAD(&nrg->link);
|
|
|
|
|
|
|
|
/* Original entry is trimmed */
|
|
|
|
rg->to = f;
|
|
|
|
|
|
|
|
list_add(&nrg->link, &rg->link);
|
|
|
|
nrg = NULL;
|
2008-07-24 04:27:29 +00:00
|
|
|
break;
|
2015-09-08 22:01:31 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (f <= rg->from && t >= rg->to) { /* Remove entire region */
|
|
|
|
del += rg->to - rg->from;
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
hugetlb_cgroup_uncharge_file_region(resv, rg,
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
rg->to - rg->from, true);
|
2015-09-08 22:01:31 +00:00
|
|
|
list_del(&rg->link);
|
|
|
|
kfree(rg);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (f <= rg->from) { /* Trim beginning of region */
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
hugetlb_cgroup_uncharge_file_region(resv, rg,
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
t - rg->from, false);
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
|
2020-11-02 01:07:27 +00:00
|
|
|
del += t - rg->from;
|
|
|
|
rg->from = t;
|
|
|
|
} else { /* Trim end of region */
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
hugetlb_cgroup_uncharge_file_region(resv, rg,
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
rg->to - f, false);
|
2020-11-02 01:07:27 +00:00
|
|
|
|
|
|
|
del += rg->to - f;
|
|
|
|
rg->to = f;
|
2015-09-08 22:01:31 +00:00
|
|
|
}
|
2008-07-24 04:27:29 +00:00
|
|
|
}
|
2014-04-03 21:47:27 +00:00
|
|
|
|
|
|
|
spin_unlock(&resv->lock);
|
2015-09-08 22:01:31 +00:00
|
|
|
kfree(nrg);
|
|
|
|
return del;
|
2008-07-24 04:27:29 +00:00
|
|
|
}
|
|
|
|
|
2015-09-08 22:01:41 +00:00
|
|
|
/*
|
|
|
|
* A rare out of memory error was encountered which prevented removal of
|
|
|
|
* the reserve map region for a page. The huge page itself was free'ed
|
|
|
|
* and removed from the page cache. This routine will adjust the subpool
|
|
|
|
* usage count, and the global reserve count if needed. By incrementing
|
|
|
|
* these counts, the reserve map entry which could not be deleted will
|
|
|
|
* appear as a "reserved" entry instead of simply dangling with incorrect
|
|
|
|
* counts.
|
|
|
|
*/
|
2016-10-08 00:02:01 +00:00
|
|
|
void hugetlb_fix_reserve_counts(struct inode *inode)
|
2015-09-08 22:01:41 +00:00
|
|
|
{
|
|
|
|
struct hugepage_subpool *spool = subpool_inode(inode);
|
|
|
|
long rsv_adjust;
|
2021-05-05 01:34:38 +00:00
|
|
|
bool reserved = false;
|
2015-09-08 22:01:41 +00:00
|
|
|
|
|
|
|
rsv_adjust = hugepage_subpool_get_pages(spool, 1);
|
2021-05-05 01:34:38 +00:00
|
|
|
if (rsv_adjust > 0) {
|
2015-09-08 22:01:41 +00:00
|
|
|
struct hstate *h = hstate_inode(inode);
|
|
|
|
|
2021-05-05 01:34:38 +00:00
|
|
|
if (!hugetlb_acct_memory(h, 1))
|
|
|
|
reserved = true;
|
|
|
|
} else if (!rsv_adjust) {
|
|
|
|
reserved = true;
|
2015-09-08 22:01:41 +00:00
|
|
|
}
|
2021-05-05 01:34:38 +00:00
|
|
|
|
|
|
|
if (!reserved)
|
|
|
|
pr_warn("hugetlb: Huge Page Reserved count may go negative.\n");
|
2015-09-08 22:01:41 +00:00
|
|
|
}
|
|
|
|
|
2015-06-24 23:57:52 +00:00
|
|
|
/*
|
|
|
|
* Count and return the number of huge pages in the reserve map
|
|
|
|
* that intersect with the range [f, t).
|
|
|
|
*/
|
2014-04-03 21:47:26 +00:00
|
|
|
static long region_count(struct resv_map *resv, long f, long t)
|
2008-07-24 04:27:32 +00:00
|
|
|
{
|
2014-04-03 21:47:26 +00:00
|
|
|
struct list_head *head = &resv->regions;
|
2008-07-24 04:27:32 +00:00
|
|
|
struct file_region *rg;
|
|
|
|
long chg = 0;
|
|
|
|
|
2014-04-03 21:47:27 +00:00
|
|
|
spin_lock(&resv->lock);
|
2008-07-24 04:27:32 +00:00
|
|
|
/* Locate each segment we overlap with, and count that overlap. */
|
|
|
|
list_for_each_entry(rg, head, link) {
|
2012-05-29 22:06:17 +00:00
|
|
|
long seg_from;
|
|
|
|
long seg_to;
|
2008-07-24 04:27:32 +00:00
|
|
|
|
|
|
|
if (rg->to <= f)
|
|
|
|
continue;
|
|
|
|
if (rg->from >= t)
|
|
|
|
break;
|
|
|
|
|
|
|
|
seg_from = max(rg->from, f);
|
|
|
|
seg_to = min(rg->to, t);
|
|
|
|
|
|
|
|
chg += seg_to - seg_from;
|
|
|
|
}
|
2014-04-03 21:47:27 +00:00
|
|
|
spin_unlock(&resv->lock);
|
2008-07-24 04:27:32 +00:00
|
|
|
|
|
|
|
return chg;
|
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:26 +00:00
|
|
|
/*
|
|
|
|
* Convert the address within this vma to the page offset within
|
2023-09-26 19:20:17 +00:00
|
|
|
* the mapping, huge page units here.
|
2008-07-24 04:27:26 +00:00
|
|
|
*/
|
2008-07-24 04:27:41 +00:00
|
|
|
static pgoff_t vma_hugecache_offset(struct hstate *h,
|
|
|
|
struct vm_area_struct *vma, unsigned long address)
|
2008-07-24 04:27:26 +00:00
|
|
|
{
|
2008-07-24 04:27:41 +00:00
|
|
|
return ((address - vma->vm_start) >> huge_page_shift(h)) +
|
|
|
|
(vma->vm_pgoff >> huge_page_order(h));
|
2008-07-24 04:27:26 +00:00
|
|
|
}
|
|
|
|
|
2023-08-22 17:24:59 +00:00
|
|
|
/**
|
|
|
|
* vma_kernel_pagesize - Page size granularity for this VMA.
|
|
|
|
* @vma: The user mapping.
|
|
|
|
*
|
|
|
|
* Folios in this VMA will be aligned to, and at least the size of the
|
|
|
|
* number of bytes returned by this function.
|
|
|
|
*
|
|
|
|
* Return: The default size of the folios allocated when backing a VMA.
|
2009-01-06 22:38:53 +00:00
|
|
|
*/
|
|
|
|
unsigned long vma_kernel_pagesize(struct vm_area_struct *vma)
|
|
|
|
{
|
2018-04-05 23:24:25 +00:00
|
|
|
if (vma->vm_ops && vma->vm_ops->pagesize)
|
|
|
|
return vma->vm_ops->pagesize(vma);
|
|
|
|
return PAGE_SIZE;
|
2009-01-06 22:38:53 +00:00
|
|
|
}
|
2009-06-19 13:16:22 +00:00
|
|
|
EXPORT_SYMBOL_GPL(vma_kernel_pagesize);
|
2009-01-06 22:38:53 +00:00
|
|
|
|
2009-01-06 22:38:54 +00:00
|
|
|
/*
|
|
|
|
* Return the page size being used by the MMU to back a VMA. In the majority
|
|
|
|
* of cases, the page size used by the kernel matches the MMU size. On
|
2018-04-05 23:24:21 +00:00
|
|
|
* architectures where it differs, an architecture-specific 'strong'
|
|
|
|
* version of this symbol is required.
|
2009-01-06 22:38:54 +00:00
|
|
|
*/
|
2018-04-05 23:24:21 +00:00
|
|
|
__weak unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
|
2009-01-06 22:38:54 +00:00
|
|
|
{
|
|
|
|
return vma_kernel_pagesize(vma);
|
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:32 +00:00
|
|
|
/*
|
|
|
|
* Flags for MAP_PRIVATE reservations. These are stored in the bottom
|
|
|
|
* bits of the reservation map pointer, which are always clear due to
|
|
|
|
* alignment.
|
|
|
|
*/
|
|
|
|
#define HPAGE_RESV_OWNER (1UL << 0)
|
|
|
|
#define HPAGE_RESV_UNMAPPED (1UL << 1)
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
#define HPAGE_RESV_MASK (HPAGE_RESV_OWNER | HPAGE_RESV_UNMAPPED)
|
2008-07-24 04:27:32 +00:00
|
|
|
|
2008-07-24 04:27:23 +00:00
|
|
|
/*
|
|
|
|
* These helpers are used to track how many pages are reserved for
|
|
|
|
* faults in a MAP_PRIVATE mapping. Only the process that called mmap()
|
|
|
|
* is guaranteed to have their future faults succeed.
|
|
|
|
*
|
2022-09-14 22:18:07 +00:00
|
|
|
* With the exception of hugetlb_dup_vma_private() which is called at fork(),
|
2008-07-24 04:27:23 +00:00
|
|
|
* the reserve counters are updated with the hugetlb_lock held. It is safe
|
|
|
|
* to reset the VMA at fork() time as it is not in use yet and there is no
|
|
|
|
* chance of the global counters getting corrupted as a result of the values.
|
2008-07-24 04:27:32 +00:00
|
|
|
*
|
|
|
|
* The private mapping reservation is represented in a subtly different
|
|
|
|
* manner to a shared mapping. A shared mapping has a region map associated
|
|
|
|
* with the underlying file, this region map represents the backing file
|
|
|
|
* pages which have ever had a reservation assigned which this persists even
|
|
|
|
* after the page is instantiated. A private mapping has a region map
|
|
|
|
* associated with the original mmap which is attached to all VMAs which
|
|
|
|
* reference it, this region map represents those offsets which have consumed
|
|
|
|
* reservation ie. where pages have been instantiated.
|
2008-07-24 04:27:23 +00:00
|
|
|
*/
|
2008-07-24 04:27:26 +00:00
|
|
|
static unsigned long get_vma_private_data(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
return (unsigned long)vma->vm_private_data;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_vma_private_data(struct vm_area_struct *vma,
|
|
|
|
unsigned long value)
|
|
|
|
{
|
|
|
|
vma->vm_private_data = (void *)value;
|
|
|
|
}
|
|
|
|
|
2020-04-02 04:11:21 +00:00
|
|
|
static void
|
|
|
|
resv_map_set_hugetlb_cgroup_uncharge_info(struct resv_map *resv_map,
|
|
|
|
struct hugetlb_cgroup *h_cg,
|
|
|
|
struct hstate *h)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_CGROUP_HUGETLB
|
|
|
|
if (!h_cg || !h) {
|
|
|
|
resv_map->reservation_counter = NULL;
|
|
|
|
resv_map->pages_per_hpage = 0;
|
|
|
|
resv_map->css = NULL;
|
|
|
|
} else {
|
|
|
|
resv_map->reservation_counter =
|
|
|
|
&h_cg->rsvd_hugepage[hstate_index(h)];
|
|
|
|
resv_map->pages_per_hpage = pages_per_huge_page(h);
|
|
|
|
resv_map->css = &h_cg->css;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
mm, hugetlb: unify region structure handling
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping. For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.
Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:25 +00:00
|
|
|
struct resv_map *resv_map_alloc(void)
|
2008-07-24 04:27:32 +00:00
|
|
|
{
|
|
|
|
struct resv_map *resv_map = kmalloc(sizeof(*resv_map), GFP_KERNEL);
|
2015-09-08 22:01:28 +00:00
|
|
|
struct file_region *rg = kmalloc(sizeof(*rg), GFP_KERNEL);
|
|
|
|
|
|
|
|
if (!resv_map || !rg) {
|
|
|
|
kfree(resv_map);
|
|
|
|
kfree(rg);
|
2008-07-24 04:27:32 +00:00
|
|
|
return NULL;
|
2015-09-08 22:01:28 +00:00
|
|
|
}
|
2008-07-24 04:27:32 +00:00
|
|
|
|
|
|
|
kref_init(&resv_map->refs);
|
2014-04-03 21:47:27 +00:00
|
|
|
spin_lock_init(&resv_map->lock);
|
2008-07-24 04:27:32 +00:00
|
|
|
INIT_LIST_HEAD(&resv_map->regions);
|
2023-10-06 03:59:07 +00:00
|
|
|
init_rwsem(&resv_map->rw_sema);
|
2008-07-24 04:27:32 +00:00
|
|
|
|
2015-09-08 22:01:28 +00:00
|
|
|
resv_map->adds_in_progress = 0;
|
2020-04-02 04:11:21 +00:00
|
|
|
/*
|
|
|
|
* Initialize these to 0. On shared mappings, 0's here indicate these
|
|
|
|
* fields don't do cgroup accounting. On private mappings, these will be
|
|
|
|
* re-initialized to the proper values, to indicate that hugetlb cgroup
|
|
|
|
* reservations are to be un-charged from here.
|
|
|
|
*/
|
|
|
|
resv_map_set_hugetlb_cgroup_uncharge_info(resv_map, NULL, NULL);
|
2015-09-08 22:01:28 +00:00
|
|
|
|
|
|
|
INIT_LIST_HEAD(&resv_map->region_cache);
|
|
|
|
list_add(&rg->link, &resv_map->region_cache);
|
|
|
|
resv_map->region_cache_count = 1;
|
|
|
|
|
2008-07-24 04:27:32 +00:00
|
|
|
return resv_map;
|
|
|
|
}
|
|
|
|
|
mm, hugetlb: unify region structure handling
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping. For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.
Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:25 +00:00
|
|
|
void resv_map_release(struct kref *ref)
|
2008-07-24 04:27:32 +00:00
|
|
|
{
|
|
|
|
struct resv_map *resv_map = container_of(ref, struct resv_map, refs);
|
2015-09-08 22:01:28 +00:00
|
|
|
struct list_head *head = &resv_map->region_cache;
|
|
|
|
struct file_region *rg, *trg;
|
2008-07-24 04:27:32 +00:00
|
|
|
|
|
|
|
/* Clear out any active regions before we release the map. */
|
2015-09-08 22:01:31 +00:00
|
|
|
region_del(resv_map, 0, LONG_MAX);
|
2015-09-08 22:01:28 +00:00
|
|
|
|
|
|
|
/* ... and any entries left in the cache */
|
|
|
|
list_for_each_entry_safe(rg, trg, head, link) {
|
|
|
|
list_del(&rg->link);
|
|
|
|
kfree(rg);
|
|
|
|
}
|
|
|
|
|
|
|
|
VM_BUG_ON(resv_map->adds_in_progress);
|
|
|
|
|
2008-07-24 04:27:32 +00:00
|
|
|
kfree(resv_map);
|
|
|
|
}
|
|
|
|
|
2014-04-03 21:47:30 +00:00
|
|
|
static inline struct resv_map *inode_resv_map(struct inode *inode)
|
|
|
|
{
|
2019-05-14 00:22:55 +00:00
|
|
|
/*
|
|
|
|
* At inode evict time, i_mapping may not point to the original
|
|
|
|
* address space within the inode. This original address space
|
|
|
|
* contains the pointer to the resv_map. So, always use the
|
|
|
|
* address space embedded within the inode.
|
|
|
|
* The VERY common case is inode->mapping == &inode->i_data but,
|
|
|
|
* this may not be true for device special inodes.
|
|
|
|
*/
|
2023-11-17 21:58:23 +00:00
|
|
|
return (struct resv_map *)(&inode->i_data)->i_private_data;
|
2014-04-03 21:47:30 +00:00
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:32 +00:00
|
|
|
static struct resv_map *vma_resv_map(struct vm_area_struct *vma)
|
2008-07-24 04:27:23 +00:00
|
|
|
{
|
2014-10-09 22:28:10 +00:00
|
|
|
VM_BUG_ON_VMA(!is_vm_hugetlb_page(vma), vma);
|
2014-04-03 21:47:30 +00:00
|
|
|
if (vma->vm_flags & VM_MAYSHARE) {
|
|
|
|
struct address_space *mapping = vma->vm_file->f_mapping;
|
|
|
|
struct inode *inode = mapping->host;
|
|
|
|
|
|
|
|
return inode_resv_map(inode);
|
|
|
|
|
|
|
|
} else {
|
2008-07-24 04:27:32 +00:00
|
|
|
return (struct resv_map *)(get_vma_private_data(vma) &
|
|
|
|
~HPAGE_RESV_MASK);
|
2014-04-03 21:47:30 +00:00
|
|
|
}
|
2008-07-24 04:27:23 +00:00
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:32 +00:00
|
|
|
static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map)
|
2008-07-24 04:27:23 +00:00
|
|
|
{
|
2014-10-09 22:28:10 +00:00
|
|
|
VM_BUG_ON_VMA(!is_vm_hugetlb_page(vma), vma);
|
|
|
|
VM_BUG_ON_VMA(vma->vm_flags & VM_MAYSHARE, vma);
|
2008-07-24 04:27:23 +00:00
|
|
|
|
hugetlbfs: clear resv_map pointer if mmap fails
Patch series "hugetlbfs: close race between MADV_DONTNEED and page fault", v7.
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by extending the hugetlb_vma_lock locking scheme to also
cover private hugetlb mappings (with resv_map), and pulling the locking
from __unmap_hugepage_final_range into helper functions called from
zap_page_range_single. This ensures page faults stay locked out of the
MADV_DONTNEED VMA until the huge pages have actually been freed.
This patch (of 3):
Hugetlbfs leaves a dangling pointer in the VMA if mmap fails. This has
not been a problem so far, but other code in this patch series tries to
follow that pointer.
Link: https://lkml.kernel.org/r/20231006040020.3677377-1-riel@surriel.com
Link: https://lkml.kernel.org/r/20231006040020.3677377-2-riel@surriel.com
Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 03:59:06 +00:00
|
|
|
set_vma_private_data(vma, (unsigned long)map);
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags)
|
|
|
|
{
|
2014-10-09 22:28:10 +00:00
|
|
|
VM_BUG_ON_VMA(!is_vm_hugetlb_page(vma), vma);
|
|
|
|
VM_BUG_ON_VMA(vma->vm_flags & VM_MAYSHARE, vma);
|
2008-07-24 04:27:26 +00:00
|
|
|
|
|
|
|
set_vma_private_data(vma, get_vma_private_data(vma) | flags);
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int is_vma_resv_set(struct vm_area_struct *vma, unsigned long flag)
|
|
|
|
{
|
2014-10-09 22:28:10 +00:00
|
|
|
VM_BUG_ON_VMA(!is_vm_hugetlb_page(vma), vma);
|
2008-07-24 04:27:26 +00:00
|
|
|
|
|
|
|
return (get_vma_private_data(vma) & flag) != 0;
|
2008-07-24 04:27:23 +00:00
|
|
|
}
|
|
|
|
|
2023-11-14 01:20:33 +00:00
|
|
|
bool __vma_private_lock(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
return !(vma->vm_flags & VM_MAYSHARE) &&
|
|
|
|
get_vma_private_data(vma) & ~HPAGE_RESV_MASK &&
|
|
|
|
is_vma_resv_set(vma, HPAGE_RESV_OWNER);
|
|
|
|
}
|
|
|
|
|
2022-09-14 22:18:07 +00:00
|
|
|
void hugetlb_dup_vma_private(struct vm_area_struct *vma)
|
2008-07-24 04:27:23 +00:00
|
|
|
{
|
2014-10-09 22:28:10 +00:00
|
|
|
VM_BUG_ON_VMA(!is_vm_hugetlb_page(vma), vma);
|
2022-09-14 22:18:07 +00:00
|
|
|
/*
|
|
|
|
* Clear vm_private_data
|
2022-10-19 20:19:57 +00:00
|
|
|
* - For shared mappings this is a per-vma semaphore that may be
|
|
|
|
* allocated in a subsequent call to hugetlb_vm_op_open.
|
|
|
|
* Before clearing, make sure pointer is not associated with vma
|
|
|
|
* as this will leak the structure. This is the case when called
|
|
|
|
* via clear_vma_resv_huge_pages() and hugetlb_vm_op_open has already
|
|
|
|
* been called to allocate a new structure.
|
2022-09-14 22:18:07 +00:00
|
|
|
* - For MAP_PRIVATE mappings, this is the reserve map which does
|
|
|
|
* not apply to children. Faults generated by the children are
|
|
|
|
* not guaranteed to succeed, even if read-only.
|
|
|
|
*/
|
2022-10-19 20:19:57 +00:00
|
|
|
if (vma->vm_flags & VM_MAYSHARE) {
|
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
|
|
|
|
|
|
|
if (vma_lock && vma_lock->vma != vma)
|
|
|
|
vma->vm_private_data = NULL;
|
|
|
|
} else
|
|
|
|
vma->vm_private_data = NULL;
|
2008-07-24 04:27:23 +00:00
|
|
|
}
|
|
|
|
|
2021-11-05 20:41:40 +00:00
|
|
|
/*
|
|
|
|
* Reset and decrement one ref on hugepage private reservation.
|
2023-01-07 00:00:05 +00:00
|
|
|
* Called with mm->mmap_lock writer semaphore held.
|
2021-11-05 20:41:40 +00:00
|
|
|
* This function should be only used by move_vma() and operate on
|
|
|
|
* same sized vma. It should never come here with last ref on the
|
|
|
|
* reservation.
|
|
|
|
*/
|
|
|
|
void clear_vma_resv_huge_pages(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Clear the old hugetlb private page reservation.
|
|
|
|
* It has already been transferred to new_vma.
|
|
|
|
*
|
|
|
|
* During a mremap() operation of a hugetlb vma we call move_vma()
|
|
|
|
* which copies vma into new_vma and unmaps vma. After the copy
|
|
|
|
* operation both new_vma and vma share a reference to the resv_map
|
|
|
|
* struct, and at that point vma is about to be unmapped. We don't
|
|
|
|
* want to return the reservation to the pool at unmap of vma because
|
|
|
|
* the reservation still lives on in new_vma, so simply decrement the
|
|
|
|
* ref here and remove the resv_map reference from this vma.
|
|
|
|
*/
|
|
|
|
struct resv_map *reservations = vma_resv_map(vma);
|
|
|
|
|
2021-11-20 00:43:40 +00:00
|
|
|
if (reservations && is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
|
|
|
|
resv_map_put_hugetlb_cgroup_uncharge_info(reservations);
|
2021-11-05 20:41:40 +00:00
|
|
|
kref_put(&reservations->refs, resv_map_release);
|
2021-11-20 00:43:40 +00:00
|
|
|
}
|
2021-11-05 20:41:40 +00:00
|
|
|
|
2022-09-14 22:18:07 +00:00
|
|
|
hugetlb_dup_vma_private(vma);
|
2021-11-05 20:41:40 +00:00
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:23 +00:00
|
|
|
/* Returns true if the VMA has associated reserve pages */
|
2015-09-04 22:48:27 +00:00
|
|
|
static bool vma_has_reserves(struct vm_area_struct *vma, long chg)
|
2008-07-24 04:27:23 +00:00
|
|
|
{
|
mm, hugetlb: decrement reserve count if VM_NORESERVE alloc page cache
If a vma with VM_NORESERVE allocate a new page for page cache, we should
check whether this area is reserved or not. If this address is already
reserved by other process(in case of chg == 0), we should decrement
reserve count, because this allocated page will go into page cache and
currently, there is no way to know that this page comes from reserved pool
or not when releasing inode. This may introduce over-counting problem to
reserved count. With following example code, you can easily reproduce
this situation.
Assume 2MB, nr_hugepages = 100
size = 20 * MB;
flag = MAP_SHARED;
p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
if (p == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
return -1;
}
flag = MAP_SHARED | MAP_NORESERVE;
q = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
if (q == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
}
q[0] = 'c';
After finish the program, run 'cat /proc/meminfo'. You can see below
result.
HugePages_Free: 100
HugePages_Rsvd: 1
To fix this, we should check our mapping type and tracked region. If our
mapping is VM_NORESERVE, VM_MAYSHARE and chg is 0, this imply that current
allocated page will go into page cache which is already reserved region
when mapping is created. In this case, we should decrease reserve count.
As implementing above, this patch solve the problem.
[akpm@linux-foundation.org: fix spelling in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:18 +00:00
|
|
|
if (vma->vm_flags & VM_NORESERVE) {
|
|
|
|
/*
|
|
|
|
* This address is already reserved by other process(chg == 0),
|
|
|
|
* so, we should decrement reserved count. Without decrementing,
|
|
|
|
* reserve count remains after releasing inode, because this
|
|
|
|
* allocated page will go into page cache and is regarded as
|
|
|
|
* coming from reserved pool in releasing step. Currently, we
|
|
|
|
* don't have any other solution to deal with this situation
|
|
|
|
* properly, so add work-around here.
|
|
|
|
*/
|
|
|
|
if (vma->vm_flags & VM_MAYSHARE && chg == 0)
|
2015-09-04 22:48:27 +00:00
|
|
|
return true;
|
mm, hugetlb: decrement reserve count if VM_NORESERVE alloc page cache
If a vma with VM_NORESERVE allocate a new page for page cache, we should
check whether this area is reserved or not. If this address is already
reserved by other process(in case of chg == 0), we should decrement
reserve count, because this allocated page will go into page cache and
currently, there is no way to know that this page comes from reserved pool
or not when releasing inode. This may introduce over-counting problem to
reserved count. With following example code, you can easily reproduce
this situation.
Assume 2MB, nr_hugepages = 100
size = 20 * MB;
flag = MAP_SHARED;
p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
if (p == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
return -1;
}
flag = MAP_SHARED | MAP_NORESERVE;
q = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
if (q == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
}
q[0] = 'c';
After finish the program, run 'cat /proc/meminfo'. You can see below
result.
HugePages_Free: 100
HugePages_Rsvd: 1
To fix this, we should check our mapping type and tracked region. If our
mapping is VM_NORESERVE, VM_MAYSHARE and chg is 0, this imply that current
allocated page will go into page cache which is already reserved region
when mapping is created. In this case, we should decrease reserve count.
As implementing above, this patch solve the problem.
[akpm@linux-foundation.org: fix spelling in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:18 +00:00
|
|
|
else
|
2015-09-04 22:48:27 +00:00
|
|
|
return false;
|
mm, hugetlb: decrement reserve count if VM_NORESERVE alloc page cache
If a vma with VM_NORESERVE allocate a new page for page cache, we should
check whether this area is reserved or not. If this address is already
reserved by other process(in case of chg == 0), we should decrement
reserve count, because this allocated page will go into page cache and
currently, there is no way to know that this page comes from reserved pool
or not when releasing inode. This may introduce over-counting problem to
reserved count. With following example code, you can easily reproduce
this situation.
Assume 2MB, nr_hugepages = 100
size = 20 * MB;
flag = MAP_SHARED;
p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
if (p == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
return -1;
}
flag = MAP_SHARED | MAP_NORESERVE;
q = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
if (q == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
}
q[0] = 'c';
After finish the program, run 'cat /proc/meminfo'. You can see below
result.
HugePages_Free: 100
HugePages_Rsvd: 1
To fix this, we should check our mapping type and tracked region. If our
mapping is VM_NORESERVE, VM_MAYSHARE and chg is 0, this imply that current
allocated page will go into page cache which is already reserved region
when mapping is created. In this case, we should decrease reserve count.
As implementing above, this patch solve the problem.
[akpm@linux-foundation.org: fix spelling in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:18 +00:00
|
|
|
}
|
2013-09-11 21:21:07 +00:00
|
|
|
|
|
|
|
/* Shared mappings always use reserves */
|
2015-09-08 22:01:44 +00:00
|
|
|
if (vma->vm_flags & VM_MAYSHARE) {
|
|
|
|
/*
|
|
|
|
* We know VM_NORESERVE is not set. Therefore, there SHOULD
|
|
|
|
* be a region map for all pages. The only situation where
|
|
|
|
* there is no region map is if a hole was punched via
|
2020-06-04 23:49:07 +00:00
|
|
|
* fallocate. In this case, there really are no reserves to
|
2015-09-08 22:01:44 +00:00
|
|
|
* use. This situation is indicated if chg != 0.
|
|
|
|
*/
|
|
|
|
if (chg)
|
|
|
|
return false;
|
|
|
|
else
|
|
|
|
return true;
|
|
|
|
}
|
2013-09-11 21:21:07 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Only the process that called mmap() has reserves for
|
|
|
|
* private mappings.
|
|
|
|
*/
|
2016-06-08 22:33:42 +00:00
|
|
|
if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
|
|
|
|
/*
|
|
|
|
* Like the shared case above, a hole punch or truncate
|
|
|
|
* could have been performed on the private mapping.
|
|
|
|
* Examine the value of chg to determine if reserves
|
|
|
|
* actually exist or were previously consumed.
|
|
|
|
* Very Subtle - The value of chg comes from a previous
|
|
|
|
* call to vma_needs_reserves(). The reserve map for
|
|
|
|
* private mappings has different (opposite) semantics
|
|
|
|
* than that of shared mappings. vma_needs_reserves()
|
|
|
|
* has already taken this difference in semantics into
|
|
|
|
* account. Therefore, the meaning of chg is the same
|
|
|
|
* as in the shared case above. Code could easily be
|
|
|
|
* combined, but keeping it separate draws attention to
|
|
|
|
* subtle differences.
|
|
|
|
*/
|
|
|
|
if (chg)
|
|
|
|
return false;
|
|
|
|
else
|
|
|
|
return true;
|
|
|
|
}
|
2013-09-11 21:21:07 +00:00
|
|
|
|
2015-09-04 22:48:27 +00:00
|
|
|
return false;
|
2008-07-24 04:27:23 +00:00
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:36 +00:00
|
|
|
static void enqueue_hugetlb_folio(struct hstate *h, struct folio *folio)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2022-11-29 22:50:36 +00:00
|
|
|
int nid = folio_nid(folio);
|
2021-05-05 01:35:10 +00:00
|
|
|
|
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
2022-11-29 22:50:36 +00:00
|
|
|
VM_BUG_ON_FOLIO(folio_ref_count(folio), folio);
|
2021-09-02 21:58:47 +00:00
|
|
|
|
2022-11-29 22:50:36 +00:00
|
|
|
list_move(&folio->lru, &h->hugepage_freelists[nid]);
|
2008-07-24 04:27:41 +00:00
|
|
|
h->free_huge_pages++;
|
|
|
|
h->free_huge_pages_node[nid]++;
|
2022-11-29 22:50:36 +00:00
|
|
|
folio_set_hugetlb_freed(folio);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2023-01-13 22:30:52 +00:00
|
|
|
static struct folio *dequeue_hugetlb_folio_node_exact(struct hstate *h,
|
|
|
|
int nid)
|
2010-09-08 01:19:33 +00:00
|
|
|
{
|
2023-01-13 22:30:52 +00:00
|
|
|
struct folio *folio;
|
2021-05-05 01:38:53 +00:00
|
|
|
bool pin = !!(current->flags & PF_MEMALLOC_PIN);
|
2020-08-12 01:37:38 +00:00
|
|
|
|
2021-05-05 01:35:10 +00:00
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
2023-01-13 22:30:52 +00:00
|
|
|
list_for_each_entry(folio, &h->hugepage_freelists[nid], lru) {
|
|
|
|
if (pin && !folio_is_longterm_pinnable(folio))
|
2020-08-12 01:37:38 +00:00
|
|
|
continue;
|
2010-09-08 01:19:33 +00:00
|
|
|
|
2023-01-13 22:30:52 +00:00
|
|
|
if (folio_test_hwpoison(folio))
|
2020-10-13 23:56:39 +00:00
|
|
|
continue;
|
|
|
|
|
2023-01-13 22:30:52 +00:00
|
|
|
list_move(&folio->lru, &h->hugepage_activelist);
|
|
|
|
folio_ref_unfreeze(folio, 1);
|
|
|
|
folio_clear_hugetlb_freed(folio);
|
2020-10-13 23:56:39 +00:00
|
|
|
h->free_huge_pages--;
|
|
|
|
h->free_huge_pages_node[nid]--;
|
2023-01-13 22:30:52 +00:00
|
|
|
return folio;
|
2020-08-12 01:37:38 +00:00
|
|
|
}
|
|
|
|
|
2020-10-13 23:56:39 +00:00
|
|
|
return NULL;
|
2010-09-08 01:19:33 +00:00
|
|
|
}
|
|
|
|
|
2023-01-13 22:30:52 +00:00
|
|
|
static struct folio *dequeue_hugetlb_folio_nodemask(struct hstate *h, gfp_t gfp_mask,
|
|
|
|
int nid, nodemask_t *nmask)
|
2017-07-06 22:38:38 +00:00
|
|
|
{
|
2017-07-10 22:49:11 +00:00
|
|
|
unsigned int cpuset_mems_cookie;
|
|
|
|
struct zonelist *zonelist;
|
|
|
|
struct zone *zone;
|
|
|
|
struct zoneref *z;
|
2019-03-05 23:42:58 +00:00
|
|
|
int node = NUMA_NO_NODE;
|
2017-07-06 22:38:38 +00:00
|
|
|
|
2024-06-12 08:29:36 +00:00
|
|
|
/* 'nid' should not be NUMA_NO_NODE. Try to catch any misuse of it and rectifiy. */
|
|
|
|
if (nid == NUMA_NO_NODE)
|
|
|
|
nid = numa_node_id();
|
|
|
|
|
2017-07-10 22:49:11 +00:00
|
|
|
zonelist = node_zonelist(nid, gfp_mask);
|
|
|
|
|
|
|
|
retry_cpuset:
|
|
|
|
cpuset_mems_cookie = read_mems_allowed_begin();
|
|
|
|
for_each_zone_zonelist_nodemask(zone, z, zonelist, gfp_zone(gfp_mask), nmask) {
|
2023-01-13 22:30:52 +00:00
|
|
|
struct folio *folio;
|
2017-07-10 22:49:11 +00:00
|
|
|
|
|
|
|
if (!cpuset_zone_allowed(zone, gfp_mask))
|
|
|
|
continue;
|
|
|
|
/*
|
|
|
|
* no need to ask again on the same node. Pool is node rather than
|
|
|
|
* zone aware
|
|
|
|
*/
|
|
|
|
if (zone_to_nid(zone) == node)
|
|
|
|
continue;
|
|
|
|
node = zone_to_nid(zone);
|
2017-07-06 22:38:38 +00:00
|
|
|
|
2023-01-13 22:30:52 +00:00
|
|
|
folio = dequeue_hugetlb_folio_node_exact(h, node);
|
|
|
|
if (folio)
|
|
|
|
return folio;
|
2017-07-06 22:38:38 +00:00
|
|
|
}
|
2017-07-10 22:49:11 +00:00
|
|
|
if (unlikely(read_mems_allowed_retry(cpuset_mems_cookie)))
|
|
|
|
goto retry_cpuset;
|
|
|
|
|
2017-07-06 22:38:38 +00:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2022-09-22 02:19:29 +00:00
|
|
|
static unsigned long available_huge_pages(struct hstate *h)
|
|
|
|
{
|
|
|
|
return h->free_huge_pages - h->resv_huge_pages;
|
|
|
|
}
|
|
|
|
|
2023-01-13 22:30:54 +00:00
|
|
|
static struct folio *dequeue_hugetlb_folio_vma(struct hstate *h,
|
2008-07-24 04:27:41 +00:00
|
|
|
struct vm_area_struct *vma,
|
mm, hugetlb: decrement reserve count if VM_NORESERVE alloc page cache
If a vma with VM_NORESERVE allocate a new page for page cache, we should
check whether this area is reserved or not. If this address is already
reserved by other process(in case of chg == 0), we should decrement
reserve count, because this allocated page will go into page cache and
currently, there is no way to know that this page comes from reserved pool
or not when releasing inode. This may introduce over-counting problem to
reserved count. With following example code, you can easily reproduce
this situation.
Assume 2MB, nr_hugepages = 100
size = 20 * MB;
flag = MAP_SHARED;
p = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
if (p == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
return -1;
}
flag = MAP_SHARED | MAP_NORESERVE;
q = mmap(NULL, size, PROT_READ|PROT_WRITE, flag, fd, 0);
if (q == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %s\n", strerror(errno));
}
q[0] = 'c';
After finish the program, run 'cat /proc/meminfo'. You can see below
result.
HugePages_Free: 100
HugePages_Rsvd: 1
To fix this, we should check our mapping type and tracked region. If our
mapping is VM_NORESERVE, VM_MAYSHARE and chg is 0, this imply that current
allocated page will go into page cache which is already reserved region
when mapping is created. In this case, we should decrease reserve count.
As implementing above, this patch solve the problem.
[akpm@linux-foundation.org: fix spelling in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:18 +00:00
|
|
|
unsigned long address, int avoid_reserve,
|
|
|
|
long chg)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2023-01-13 22:30:52 +00:00
|
|
|
struct folio *folio = NULL;
|
Fix NUMA Memory Policy Reference Counting
This patch proposes fixes to the reference counting of memory policy in the
page allocation paths and in show_numa_map(). Extracted from my "Memory
Policy Cleanups and Enhancements" series as stand-alone.
Shared policy lookup [shmem] has always added a reference to the policy,
but this was never unrefed after page allocation or after formatting the
numa map data.
Default system policy should not require additional ref counting, nor
should the current task's task policy. However, show_numa_map() calls
get_vma_policy() to examine what may be [likely is] another task's policy.
The latter case needs protection against freeing of the policy.
This patch adds a reference count to a mempolicy returned by
get_vma_policy() when the policy is a vma policy or another task's
mempolicy. Again, shared policy is already reference counted on lookup. A
matching "unref" [__mpol_free()] is performed in alloc_page_vma() for
shared and vma policies, and in show_numa_map() for shared and another
task's mempolicy. We can call __mpol_free() directly, saving an admittedly
inexpensive inline NULL test, because we know we have a non-NULL policy.
Handling policy ref counts for hugepages is a bit trickier.
huge_zonelist() returns a zone list that might come from a shared or vma
'BIND policy. In this case, we should hold the reference until after the
huge page allocation in dequeue_hugepage(). The patch modifies
huge_zonelist() to return a pointer to the mempolicy if it needs to be
unref'd after allocation.
Kernel Build [16cpu, 32GB, ia64] - average of 10 runs:
w/o patch w/ refcount patch
Avg Std Devn Avg Std Devn
Real: 100.59 0.38 100.63 0.43
User: 1209.60 0.37 1209.91 0.31
System: 81.52 0.42 81.64 0.34
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 05:46:47 +00:00
|
|
|
struct mempolicy *mpol;
|
2017-07-06 22:40:03 +00:00
|
|
|
gfp_t gfp_mask;
|
2017-07-10 22:49:11 +00:00
|
|
|
nodemask_t *nodemask;
|
2017-07-06 22:40:03 +00:00
|
|
|
int nid;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-07-24 04:27:23 +00:00
|
|
|
/*
|
|
|
|
* A child process with MAP_PRIVATE mappings created by their parent
|
|
|
|
* have no page reserves. This check ensures that reservations are
|
|
|
|
* not "stolen". The child may still get SIGKILLed
|
|
|
|
*/
|
2022-09-22 02:19:29 +00:00
|
|
|
if (!vma_has_reserves(vma, chg) && !available_huge_pages(h))
|
2010-05-24 21:32:08 +00:00
|
|
|
goto err;
|
2008-07-24 04:27:23 +00:00
|
|
|
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
/* If reserves cannot be used, ensure enough pages are in the pool */
|
2022-09-22 02:19:29 +00:00
|
|
|
if (avoid_reserve && !available_huge_pages(h))
|
2011-04-09 02:49:08 +00:00
|
|
|
goto err;
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
|
2017-07-06 22:40:03 +00:00
|
|
|
gfp_mask = htlb_alloc_mask(h);
|
|
|
|
nid = huge_node(vma, address, gfp_mask, &mpol, &nodemask);
|
2021-09-02 22:00:13 +00:00
|
|
|
|
|
|
|
if (mpol_is_preferred_many(mpol)) {
|
2023-01-13 22:30:52 +00:00
|
|
|
folio = dequeue_hugetlb_folio_nodemask(h, gfp_mask,
|
|
|
|
nid, nodemask);
|
2021-09-02 22:00:13 +00:00
|
|
|
|
|
|
|
/* Fallback to all nodes if page==NULL */
|
|
|
|
nodemask = NULL;
|
|
|
|
}
|
|
|
|
|
2023-01-13 22:30:52 +00:00
|
|
|
if (!folio)
|
|
|
|
folio = dequeue_hugetlb_folio_nodemask(h, gfp_mask,
|
|
|
|
nid, nodemask);
|
2021-09-02 22:00:13 +00:00
|
|
|
|
2023-01-13 22:30:52 +00:00
|
|
|
if (folio && !avoid_reserve && vma_has_reserves(vma, chg)) {
|
|
|
|
folio_set_hugetlb_restore_reserve(folio);
|
2017-07-10 22:49:11 +00:00
|
|
|
h->resv_huge_pages--;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
cpuset: mm: reduce large amounts of memory barrier related damage v3
Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when
changing cpuset's mems") wins a super prize for the largest number of
memory barriers entered into fast paths for one commit.
[get|put]_mems_allowed is incredibly heavy with pairs of full memory
barriers inserted into a number of hot paths. This was detected while
investigating at large page allocator slowdown introduced some time
after 2.6.32. The largest portion of this overhead was shown by
oprofile to be at an mfence introduced by this commit into the page
allocator hot path.
For extra style points, the commit introduced the use of yield() in an
implementation of what looks like a spinning mutex.
This patch replaces the full memory barriers on both read and write
sides with a sequence counter with just read barriers on the fast path
side. This is much cheaper on some architectures, including x86. The
main bulk of the patch is the retry logic if the nodemask changes in a
manner that can cause a false failure.
While updating the nodemask, a check is made to see if a false failure
is a risk. If it is, the sequence number gets bumped and parallel
allocators will briefly stall while the nodemask update takes place.
In a page fault test microbenchmark, oprofile samples from
__alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The
actual results were
3.3.0-rc3 3.3.0-rc3
rc3-vanilla nobarrier-v2r1
Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%)
Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%)
Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%)
Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%)
Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%)
Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%)
Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%)
Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%)
Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%)
Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%)
Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%)
Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%)
Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%)
Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%)
Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%)
MMTests Statistics: duration
Sys Time Running Test (seconds) 135.68 132.17
User+Sys Time Running Test (seconds) 164.2 160.13
Total Elapsed Time (seconds) 123.46 120.87
The overall improvement is small but the System CPU time is much
improved and roughly in correlation to what oprofile reported (these
performance figures are without profiling so skew is expected). The
actual number of page faults is noticeably improved.
For benchmarks like kernel builds, the overall benefit is marginal but
the system CPU time is slightly reduced.
To test the actual bug the commit fixed I opened two terminals. The
first ran within a cpuset and continually ran a small program that
faulted 100M of anonymous data. In a second window, the nodemask of the
cpuset was continually randomised in a loop.
Without the commit, the program would fail every so often (usually
within 10 seconds) and obviously with the commit everything worked fine.
With this patch applied, it also worked fine so the fix should be
functionally equivalent.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:11 +00:00
|
|
|
|
mempolicy: rework mempolicy Reference Counting [yet again]
After further discussion with Christoph Lameter, it has become clear that my
earlier attempts to clean up the mempolicy reference counting were a bit of
overkill in some areas, resulting in superflous ref/unref in what are usually
fast paths. In other areas, further inspection reveals that I botched the
unref for interleave policies.
A separate patch, suitable for upstream/stable trees, fixes up the known
errors in the previous attempt to fix reference counting.
This patch reworks the memory policy referencing counting and, one hopes,
simplifies the code. Maybe I'll get it right this time.
See the update to the numa_memory_policy.txt document for a discussion of
memory policy reference counting that motivates this patch.
Summary:
Lookup of mempolicy, based on (vma, address) need only add a reference for
shared policy, and we need only unref the policy when finished for shared
policies. So, this patch backs out all of the unneeded extra reference
counting added by my previous attempt. It then unrefs only shared policies
when we're finished with them, using the mpol_cond_put() [conditional put]
helper function introduced by this patch.
Note that shmem_swapin() calls read_swap_cache_async() with a dummy vma
containing just the policy. read_swap_cache_async() can call alloc_page_vma()
multiple times, so we can't let alloc_page_vma() unref the shared policy in
this case. To avoid this, we make a copy of any non-null shared policy and
remove the MPOL_F_SHARED flag from the copy. This copy occurs before reading
a page [or multiple pages] from swap, so the overhead should not be an issue
here.
I introduced a new static inline function "mpol_cond_copy()" to copy the
shared policy to an on-stack policy and remove the flags that would require a
conditional free. The current implementation of mpol_cond_copy() assumes that
the struct mempolicy contains no pointers to dynamically allocated structures
that must be duplicated or reference counted during copy.
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:13:16 +00:00
|
|
|
mpol_cond_put(mpol);
|
2023-01-13 22:30:54 +00:00
|
|
|
return folio;
|
cpuset: mm: reduce large amounts of memory barrier related damage v3
Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when
changing cpuset's mems") wins a super prize for the largest number of
memory barriers entered into fast paths for one commit.
[get|put]_mems_allowed is incredibly heavy with pairs of full memory
barriers inserted into a number of hot paths. This was detected while
investigating at large page allocator slowdown introduced some time
after 2.6.32. The largest portion of this overhead was shown by
oprofile to be at an mfence introduced by this commit into the page
allocator hot path.
For extra style points, the commit introduced the use of yield() in an
implementation of what looks like a spinning mutex.
This patch replaces the full memory barriers on both read and write
sides with a sequence counter with just read barriers on the fast path
side. This is much cheaper on some architectures, including x86. The
main bulk of the patch is the retry logic if the nodemask changes in a
manner that can cause a false failure.
While updating the nodemask, a check is made to see if a false failure
is a risk. If it is, the sequence number gets bumped and parallel
allocators will briefly stall while the nodemask update takes place.
In a page fault test microbenchmark, oprofile samples from
__alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The
actual results were
3.3.0-rc3 3.3.0-rc3
rc3-vanilla nobarrier-v2r1
Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%)
Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%)
Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%)
Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%)
Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%)
Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%)
Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%)
Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%)
Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%)
Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%)
Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%)
Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%)
Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%)
Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%)
Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%)
MMTests Statistics: duration
Sys Time Running Test (seconds) 135.68 132.17
User+Sys Time Running Test (seconds) 164.2 160.13
Total Elapsed Time (seconds) 123.46 120.87
The overall improvement is small but the System CPU time is much
improved and roughly in correlation to what oprofile reported (these
performance figures are without profiling so skew is expected). The
actual number of page faults is noticeably improved.
For benchmarks like kernel builds, the overall benefit is marginal but
the system CPU time is slightly reduced.
To test the actual bug the commit fixed I opened two terminals. The
first ran within a cpuset and continually ran a small program that
faulted 100M of anonymous data. In a second window, the nodemask of the
cpuset was continually randomised in a loop.
Without the commit, the program would fail every so often (usually
within 10 seconds) and obviously with the commit everything worked fine.
With this patch applied, it also worked fine so the fix should be
functionally equivalent.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:11 +00:00
|
|
|
|
|
|
|
err:
|
|
|
|
return NULL;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2014-06-04 23:07:11 +00:00
|
|
|
/*
|
|
|
|
* common helper functions for hstate_next_node_to_{alloc|free}.
|
|
|
|
* We may have allocated or freed a huge page based on a different
|
|
|
|
* nodes_allowed previously, so h->next_node_to_{alloc|free} might
|
|
|
|
* be outside of *nodes_allowed. Ensure that we use an allowed
|
|
|
|
* node for alloc or free.
|
|
|
|
*/
|
|
|
|
static int next_node_allowed(int nid, nodemask_t *nodes_allowed)
|
|
|
|
{
|
2016-05-20 00:10:58 +00:00
|
|
|
nid = next_node_in(nid, *nodes_allowed);
|
2014-06-04 23:07:11 +00:00
|
|
|
VM_BUG_ON(nid >= MAX_NUMNODES);
|
|
|
|
|
|
|
|
return nid;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int get_valid_node_allowed(int nid, nodemask_t *nodes_allowed)
|
|
|
|
{
|
|
|
|
if (!node_isset(nid, *nodes_allowed))
|
|
|
|
nid = next_node_allowed(nid, nodes_allowed);
|
|
|
|
return nid;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* returns the previously saved node ["this node"] from which to
|
|
|
|
* allocate a persistent huge page for the pool and advance the
|
|
|
|
* next node from which to allocate, handling wrap at end of node
|
|
|
|
* mask.
|
|
|
|
*/
|
2024-02-22 14:04:16 +00:00
|
|
|
static int hstate_next_node_to_alloc(int *next_node,
|
2014-06-04 23:07:11 +00:00
|
|
|
nodemask_t *nodes_allowed)
|
|
|
|
{
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
VM_BUG_ON(!nodes_allowed);
|
|
|
|
|
2024-02-22 14:04:16 +00:00
|
|
|
nid = get_valid_node_allowed(*next_node, nodes_allowed);
|
|
|
|
*next_node = next_node_allowed(nid, nodes_allowed);
|
2014-06-04 23:07:11 +00:00
|
|
|
|
|
|
|
return nid;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2023-08-24 14:13:25 +00:00
|
|
|
* helper for remove_pool_hugetlb_folio() - return the previously saved
|
2014-06-04 23:07:11 +00:00
|
|
|
* node ["this node"] from which to free a huge page. Advance the
|
|
|
|
* next node id whether or not we find a free huge page to free so
|
|
|
|
* that the next attempt to free addresses the next node.
|
|
|
|
*/
|
|
|
|
static int hstate_next_node_to_free(struct hstate *h, nodemask_t *nodes_allowed)
|
|
|
|
{
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
VM_BUG_ON(!nodes_allowed);
|
|
|
|
|
|
|
|
nid = get_valid_node_allowed(h->next_nid_to_free, nodes_allowed);
|
|
|
|
h->next_nid_to_free = next_node_allowed(nid, nodes_allowed);
|
|
|
|
|
|
|
|
return nid;
|
|
|
|
}
|
|
|
|
|
2024-02-22 14:04:16 +00:00
|
|
|
#define for_each_node_mask_to_alloc(next_node, nr_nodes, node, mask) \
|
2014-06-04 23:07:11 +00:00
|
|
|
for (nr_nodes = nodes_weight(*mask); \
|
|
|
|
nr_nodes > 0 && \
|
2024-02-22 14:04:16 +00:00
|
|
|
((node = hstate_next_node_to_alloc(next_node, mask)) || 1); \
|
2014-06-04 23:07:11 +00:00
|
|
|
nr_nodes--)
|
|
|
|
|
|
|
|
#define for_each_node_mask_to_free(hs, nr_nodes, node, mask) \
|
|
|
|
for (nr_nodes = nodes_weight(*mask); \
|
|
|
|
nr_nodes > 0 && \
|
|
|
|
((node = hstate_next_node_to_free(hs, mask)) || 1); \
|
|
|
|
nr_nodes--)
|
|
|
|
|
2021-11-05 20:41:33 +00:00
|
|
|
/* used to demote non-gigantic_huge pages as well */
|
2022-11-29 22:50:31 +00:00
|
|
|
static void __destroy_compound_gigantic_folio(struct folio *folio,
|
2021-11-05 20:41:30 +00:00
|
|
|
unsigned int order, bool demote)
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
int nr_pages = 1 << order;
|
2022-09-09 07:31:09 +00:00
|
|
|
struct page *p;
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
|
2023-01-11 14:28:59 +00:00
|
|
|
atomic_set(&folio->_entire_mapcount, 0);
|
mm: track mapcount of large folios in single value
Let's track the mapcount of large folios in a single value. The mapcount
of a large folio currently corresponds to the sum of the entire mapcount
and all page mapcounts.
This sum is what we actually want to know in folio_mapcount() and it is
also sufficient for implementing folio_mapped().
With PTE-mapped THP becoming more important and more widely used, we want
to avoid looping over all pages of a folio just to obtain the mapcount of
large folios. The comment "In the common case, avoid the loop when no
pages mapped by PTE" in folio_total_mapcount() does no longer hold for
mTHP that are always mapped by PTE.
Further, we are planning on using folio_mapcount() more frequently, and
might even want to remove page mapcounts for large folios in some kernel
configs. Therefore, allow for reading the mapcount of large folios
efficiently and atomically without looping over any pages.
Maintain the mapcount also for hugetlb pages for simplicity. Use the new
mapcount to implement folio_mapcount() and folio_mapped(). Make
page_mapped() simply call folio_mapped(). We can now get rid of
folio_large_is_mapped().
_nr_pages_mapped is now only used in rmap code and for debugging purposes.
Keep folio_nr_pages_mapped() around, but document that its use should be
limited to rmap internals and debugging purposes.
This change implies one additional atomic add/sub whenever
mapping/unmapping (parts of) a large folio.
As we now batch RMAP operations for PTE-mapped THP during fork(), during
unmap/zap, and when PTE-remapping a PMD-mapped THP, and we adjust the
large mapcount for a PTE batch only once, the added overhead in the common
case is small. Only when unmapping individual pages of a large folio
(e.g., during COW), the overhead might be bigger in comparison, but it's
essentially one additional atomic operation.
Note that before the new mapcount would overflow, already our refcount
would overflow: each mapping requires a folio reference. Extend the
focumentation of folio_mapcount().
Link: https://lkml.kernel.org/r/20240409192301.907377-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Richard Chang <richardycc@google.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-09 19:22:47 +00:00
|
|
|
atomic_set(&folio->_large_mapcount, 0);
|
2023-01-11 14:28:47 +00:00
|
|
|
atomic_set(&folio->_pincount, 0);
|
mm/gup: page->hpage_pinned_refcount: exact pin counts for huge pages
For huge pages (and in fact, any compound page), the GUP_PIN_COUNTING_BIAS
scheme tends to overflow too easily, each tail page increments the head
page->_refcount by GUP_PIN_COUNTING_BIAS (1024). That limits the number
of huge pages that can be pinned.
This patch removes that limitation, by using an exact form of pin counting
for compound pages of order > 1. The "order > 1" is required because this
approach uses the 3rd struct page in the compound page, and order 1
compound pages only have two pages, so that won't work there.
A new struct page field, hpage_pinned_refcount, has been added, replacing
a padding field in the union (so no new space is used).
This enhancement also has a useful side effect: huge pages and compound
pages (of order > 1) do not suffer from the "potential false positives"
problem that is discussed in the page_dma_pinned() comment block. That is
because these compound pages have extra space for tracking things, so they
get exact pin counts instead of overloading page->_refcount.
Documentation/core-api/pin_user_pages.rst is updated accordingly.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-8-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:05:33 +00:00
|
|
|
|
2022-09-09 07:31:09 +00:00
|
|
|
for (i = 1; i < nr_pages; i++) {
|
2022-11-29 22:50:31 +00:00
|
|
|
p = folio_page(folio, i);
|
2023-08-22 22:30:43 +00:00
|
|
|
p->flags &= ~PAGE_FLAGS_CHECK_AT_FREE;
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
p->mapping = NULL;
|
2015-11-07 00:29:54 +00:00
|
|
|
clear_compound_head(p);
|
2021-11-05 20:41:30 +00:00
|
|
|
if (!demote)
|
|
|
|
set_page_refcounted(p);
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:31 +00:00
|
|
|
__folio_clear_head(folio);
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:31 +00:00
|
|
|
static void destroy_compound_hugetlb_folio_for_demote(struct folio *folio,
|
2021-11-05 20:41:33 +00:00
|
|
|
unsigned int order)
|
|
|
|
{
|
2022-11-29 22:50:31 +00:00
|
|
|
__destroy_compound_gigantic_folio(folio, order, true);
|
2021-11-05 20:41:33 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_ARCH_HAS_GIGANTIC_PAGE
|
2022-11-29 22:50:31 +00:00
|
|
|
static void destroy_compound_gigantic_folio(struct folio *folio,
|
2021-11-05 20:41:30 +00:00
|
|
|
unsigned int order)
|
|
|
|
{
|
2022-11-29 22:50:31 +00:00
|
|
|
__destroy_compound_gigantic_folio(folio, order, false);
|
2021-11-05 20:41:30 +00:00
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:37 +00:00
|
|
|
static void free_gigantic_folio(struct folio *folio, unsigned int order)
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
{
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
/*
|
|
|
|
* If the page isn't allocated using the cma allocator,
|
|
|
|
* cma_release() returns false.
|
|
|
|
*/
|
2020-07-24 04:15:30 +00:00
|
|
|
#ifdef CONFIG_CMA
|
2022-11-29 22:50:37 +00:00
|
|
|
int nid = folio_nid(folio);
|
|
|
|
|
|
|
|
if (cma_release(hugetlb_cma[nid], &folio->page, 1 << order))
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
return;
|
2020-07-24 04:15:30 +00:00
|
|
|
#endif
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
|
2022-11-29 22:50:37 +00:00
|
|
|
free_contig_range(folio_pfn(folio), 1 << order);
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
}
|
|
|
|
|
2019-05-14 00:19:04 +00:00
|
|
|
#ifdef CONFIG_CONTIG_ALLOC
|
2022-11-29 22:50:39 +00:00
|
|
|
static struct folio *alloc_gigantic_folio(struct hstate *h, gfp_t gfp_mask,
|
2018-02-01 00:20:44 +00:00
|
|
|
int nid, nodemask_t *nodemask)
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
{
|
2022-11-29 22:50:39 +00:00
|
|
|
struct page *page;
|
2021-05-05 01:33:22 +00:00
|
|
|
unsigned long nr_pages = pages_per_huge_page(h);
|
2020-09-04 23:36:10 +00:00
|
|
|
if (nid == NUMA_NO_NODE)
|
|
|
|
nid = numa_mem_id();
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
|
2020-07-24 04:15:30 +00:00
|
|
|
#ifdef CONFIG_CMA
|
|
|
|
{
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
int node;
|
|
|
|
|
2020-09-04 23:36:10 +00:00
|
|
|
if (hugetlb_cma[nid]) {
|
|
|
|
page = cma_alloc(hugetlb_cma[nid], nr_pages,
|
|
|
|
huge_page_order(h), true);
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
if (page)
|
2022-11-29 22:50:39 +00:00
|
|
|
return page_folio(page);
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
}
|
2020-09-04 23:36:10 +00:00
|
|
|
|
|
|
|
if (!(gfp_mask & __GFP_THISNODE)) {
|
|
|
|
for_each_node_mask(node, *nodemask) {
|
|
|
|
if (node == nid || !hugetlb_cma[node])
|
|
|
|
continue;
|
|
|
|
|
|
|
|
page = cma_alloc(hugetlb_cma[node], nr_pages,
|
|
|
|
huge_page_order(h), true);
|
|
|
|
if (page)
|
2022-11-29 22:50:39 +00:00
|
|
|
return page_folio(page);
|
2020-09-04 23:36:10 +00:00
|
|
|
}
|
|
|
|
}
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
}
|
2020-07-24 04:15:30 +00:00
|
|
|
#endif
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
|
2022-11-29 22:50:39 +00:00
|
|
|
page = alloc_contig_pages(nr_pages, gfp_mask, nid, nodemask);
|
|
|
|
return page ? page_folio(page) : NULL;
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
}
|
|
|
|
|
2019-05-14 00:19:04 +00:00
|
|
|
#else /* !CONFIG_CONTIG_ALLOC */
|
2022-11-29 22:50:39 +00:00
|
|
|
static struct folio *alloc_gigantic_folio(struct hstate *h, gfp_t gfp_mask,
|
2019-05-14 00:19:04 +00:00
|
|
|
int nid, nodemask_t *nodemask)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_CONTIG_ALLOC */
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
|
2017-07-06 22:39:17 +00:00
|
|
|
#else /* !CONFIG_ARCH_HAS_GIGANTIC_PAGE */
|
2022-11-29 22:50:39 +00:00
|
|
|
static struct folio *alloc_gigantic_folio(struct hstate *h, gfp_t gfp_mask,
|
2019-05-14 00:19:04 +00:00
|
|
|
int nid, nodemask_t *nodemask)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
2022-11-29 22:50:37 +00:00
|
|
|
static inline void free_gigantic_folio(struct folio *folio,
|
|
|
|
unsigned int order) { }
|
2022-11-29 22:50:31 +00:00
|
|
|
static inline void destroy_compound_gigantic_folio(struct folio *folio,
|
2015-11-07 00:29:57 +00:00
|
|
|
unsigned int order) { }
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
#endif
|
|
|
|
|
2021-05-05 01:34:55 +00:00
|
|
|
/*
|
hugetlb: do not clear hugetlb dtor until allocating vmemmap
Patch series "Fix hugetlb free path race with memory errors".
In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on
HWPOISON hugepages" the race window was discovered.
https://lore.kernel.org/linux-mm/20230616233447.GB7371@monkey/
Freeing a hugetlb page back to low level memory allocators is performed
in two steps.
1) Under hugetlb lock, remove page from hugetlb lists and clear destructor
2) Outside lock, allocate vmemmap if necessary and call low level free
Between these two steps, the hugetlb page will appear as a normal
compound page. However, vmemmap for tail pages could be missing.
If a memory error occurs at this time, we could try to update page
flags non-existant page structs.
A much more detailed description is in the first patch.
The first patch addresses the race window. However, it adds a
hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page
free operation. This could lead to slowdowns if one is freeing a large
number of hugetlb pages.
The second path optimizes the update_and_free_pages_bulk routine to only
take the lock once in bulk operations.
The second patch is technically not a bug fix, but includes a Fixes tag
and Cc stable to avoid a performance regression. It can be combined with
the first, but was done separately make reviewing easier.
This patch (of 2):
Freeing a hugetlb page and releasing base pages back to the underlying
allocator such as buddy or cma is performed in two steps:
- remove_hugetlb_folio() is called to remove the folio from hugetlb
lists, get a ref on the page and remove hugetlb destructor. This
all must be done under the hugetlb lock. After this call, the page
can be treated as a normal compound page or a collection of base
size pages.
- update_and_free_hugetlb_folio() is called to allocate vmemmap if
needed and the free routine of the underlying allocator is called
on the resulting page. We can not hold the hugetlb lock here.
One issue with this scheme is that a memory error could occur between
these two steps. In this case, the memory error handling code treats
the old hugetlb page as a normal compound page or collection of base
pages. It will then try to SetPageHWPoison(page) on the page with an
error. If the page with error is a tail page without vmemmap, a write
error will occur when trying to set the flag.
Address this issue by modifying remove_hugetlb_folio() and
update_and_free_hugetlb_folio() such that the hugetlb destructor is not
cleared until after allocating vmemmap. Since clearing the destructor
requires holding the hugetlb lock, the clearing is done in
remove_hugetlb_folio() if the vmemmap is present. This saves a
lock/unlock cycle. Otherwise, destructor is cleared in
update_and_free_hugetlb_folio() after allocating vmemmap.
Note that this will leave hugetlb pages in a state where they are marked
free (by hugetlb specific page flag) and have a ref count. This is not
a normal state. The only code that would notice is the memory error
code, and it is set up to retry in such a case.
A subsequent patch will create a routine to do bulk processing of
vmemmap allocation. This will eliminate a lock/unlock cycle for each
hugetlb page in the case where we are freeing a large number of pages.
Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com
Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-11 22:09:41 +00:00
|
|
|
* Remove hugetlb folio from lists.
|
2024-03-21 14:24:47 +00:00
|
|
|
* If vmemmap exists for the folio, clear the hugetlb flag so that the
|
|
|
|
* folio appears as just a compound page. Otherwise, wait until after
|
|
|
|
* allocating vmemmap to clear the flag.
|
2021-11-05 20:41:30 +00:00
|
|
|
*
|
2021-05-05 01:34:55 +00:00
|
|
|
* Must be called with hugetlb lock held.
|
|
|
|
*/
|
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
While investigating HVO for THPs [1], it turns out that speculative PFN
walkers like compaction can race with vmemmap modifications, e.g.,
CPU 1 (vmemmap modifier) CPU 2 (speculative PFN walker)
------------------------------- ------------------------------
Allocates an LRU folio page1
Sees page1
Frees page1
Allocates a hugeTLB folio page2
(page1 being a tail of page2)
Updates vmemmap mapping page1
get_page_unless_zero(page1)
Even though page1->_refcount is zero after HVO, get_page_unless_zero() can
still try to modify this read-only field, resulting in a crash.
An independent report [2] confirmed this race.
There are two discussed approaches to fix this race:
1. Make RO vmemmap RW so that get_page_unless_zero() can fail without
triggering a PF.
2. Use RCU to make sure get_page_unless_zero() either sees zero
page->_refcount through the old vmemmap or non-zero page->_refcount
through the new one.
The second approach is preferred here because:
1. It can prevent illegal modifications to struct page[] that has been
HVO'ed;
2. It can be generalized, in a way similar to ZERO_PAGE(), to fix
similar races in other places, e.g., arch_remove_memory() on x86
[3], which frees vmemmap mapping offlined struct page[].
While adding synchronize_rcu(), the goal is to be surgical, rather than
optimized. Specifically, calls to synchronize_rcu() on the error handling
paths can be coalesced, but it is not done for the sake of Simplicity:
noticeably, this fix removes ~50% more lines than it adds.
According to the hugetlb_optimize_vmemmap section in
Documentation/admin-guide/sysctl/vm.rst, enabling HVO makes allocating or
freeing hugeTLB pages "~2x slower than before". Having synchronize_rcu()
on top makes those operations even worse, and this also affects the user
interface /proc/sys/vm/nr_overcommit_hugepages.
This is *very* hard to trigger:
1. Most hugeTLB use cases I know of are static, i.e., reserved at
boot time, because allocating at runtime is not reliable at all.
2. On top of that, someone has to be very unlucky to get tripped
over above, because the race window is so small -- I wasn't able to
trigger it with a stress testing that does nothing but that (with
THPs though).
[1] https://lore.kernel.org/20240229183436.4110845-4-yuzhao@google.com/
[2] https://lore.kernel.org/917FFC7F-0615-44DD-90EE-9F85F8EA9974@linux.dev/
[3] https://lore.kernel.org/be130a96-a27e-4240-ad78-776802f57cad@redhat.com/
Link: https://lkml.kernel.org/r/20240627222705.2974207-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-27 22:27:05 +00:00
|
|
|
static void remove_hugetlb_folio(struct hstate *h, struct folio *folio,
|
|
|
|
bool adjust_surplus)
|
2021-05-05 01:34:55 +00:00
|
|
|
{
|
2022-11-29 22:50:33 +00:00
|
|
|
int nid = folio_nid(folio);
|
2021-05-05 01:34:55 +00:00
|
|
|
|
2022-11-01 22:30:52 +00:00
|
|
|
VM_BUG_ON_FOLIO(hugetlb_cgroup_from_folio(folio), folio);
|
|
|
|
VM_BUG_ON_FOLIO(hugetlb_cgroup_from_folio_rsvd(folio), folio);
|
2021-05-05 01:34:55 +00:00
|
|
|
|
2021-05-05 01:35:10 +00:00
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
2021-05-05 01:34:55 +00:00
|
|
|
if (hstate_is_gigantic(h) && !gigantic_page_runtime_supported())
|
|
|
|
return;
|
|
|
|
|
2022-11-29 22:50:33 +00:00
|
|
|
list_del(&folio->lru);
|
2021-05-05 01:34:55 +00:00
|
|
|
|
2022-11-29 22:50:33 +00:00
|
|
|
if (folio_test_hugetlb_freed(folio)) {
|
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
While investigating HVO for THPs [1], it turns out that speculative PFN
walkers like compaction can race with vmemmap modifications, e.g.,
CPU 1 (vmemmap modifier) CPU 2 (speculative PFN walker)
------------------------------- ------------------------------
Allocates an LRU folio page1
Sees page1
Frees page1
Allocates a hugeTLB folio page2
(page1 being a tail of page2)
Updates vmemmap mapping page1
get_page_unless_zero(page1)
Even though page1->_refcount is zero after HVO, get_page_unless_zero() can
still try to modify this read-only field, resulting in a crash.
An independent report [2] confirmed this race.
There are two discussed approaches to fix this race:
1. Make RO vmemmap RW so that get_page_unless_zero() can fail without
triggering a PF.
2. Use RCU to make sure get_page_unless_zero() either sees zero
page->_refcount through the old vmemmap or non-zero page->_refcount
through the new one.
The second approach is preferred here because:
1. It can prevent illegal modifications to struct page[] that has been
HVO'ed;
2. It can be generalized, in a way similar to ZERO_PAGE(), to fix
similar races in other places, e.g., arch_remove_memory() on x86
[3], which frees vmemmap mapping offlined struct page[].
While adding synchronize_rcu(), the goal is to be surgical, rather than
optimized. Specifically, calls to synchronize_rcu() on the error handling
paths can be coalesced, but it is not done for the sake of Simplicity:
noticeably, this fix removes ~50% more lines than it adds.
According to the hugetlb_optimize_vmemmap section in
Documentation/admin-guide/sysctl/vm.rst, enabling HVO makes allocating or
freeing hugeTLB pages "~2x slower than before". Having synchronize_rcu()
on top makes those operations even worse, and this also affects the user
interface /proc/sys/vm/nr_overcommit_hugepages.
This is *very* hard to trigger:
1. Most hugeTLB use cases I know of are static, i.e., reserved at
boot time, because allocating at runtime is not reliable at all.
2. On top of that, someone has to be very unlucky to get tripped
over above, because the race window is so small -- I wasn't able to
trigger it with a stress testing that does nothing but that (with
THPs though).
[1] https://lore.kernel.org/20240229183436.4110845-4-yuzhao@google.com/
[2] https://lore.kernel.org/917FFC7F-0615-44DD-90EE-9F85F8EA9974@linux.dev/
[3] https://lore.kernel.org/be130a96-a27e-4240-ad78-776802f57cad@redhat.com/
Link: https://lkml.kernel.org/r/20240627222705.2974207-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-27 22:27:05 +00:00
|
|
|
folio_clear_hugetlb_freed(folio);
|
2021-05-05 01:34:55 +00:00
|
|
|
h->free_huge_pages--;
|
|
|
|
h->free_huge_pages_node[nid]--;
|
|
|
|
}
|
|
|
|
if (adjust_surplus) {
|
|
|
|
h->surplus_huge_pages--;
|
|
|
|
h->surplus_huge_pages_node[nid]--;
|
|
|
|
}
|
|
|
|
|
2021-09-02 21:58:50 +00:00
|
|
|
/*
|
2024-03-21 14:24:47 +00:00
|
|
|
* We can only clear the hugetlb flag after allocating vmemmap
|
hugetlb: do not clear hugetlb dtor until allocating vmemmap
Patch series "Fix hugetlb free path race with memory errors".
In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on
HWPOISON hugepages" the race window was discovered.
https://lore.kernel.org/linux-mm/20230616233447.GB7371@monkey/
Freeing a hugetlb page back to low level memory allocators is performed
in two steps.
1) Under hugetlb lock, remove page from hugetlb lists and clear destructor
2) Outside lock, allocate vmemmap if necessary and call low level free
Between these two steps, the hugetlb page will appear as a normal
compound page. However, vmemmap for tail pages could be missing.
If a memory error occurs at this time, we could try to update page
flags non-existant page structs.
A much more detailed description is in the first patch.
The first patch addresses the race window. However, it adds a
hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page
free operation. This could lead to slowdowns if one is freeing a large
number of hugetlb pages.
The second path optimizes the update_and_free_pages_bulk routine to only
take the lock once in bulk operations.
The second patch is technically not a bug fix, but includes a Fixes tag
and Cc stable to avoid a performance regression. It can be combined with
the first, but was done separately make reviewing easier.
This patch (of 2):
Freeing a hugetlb page and releasing base pages back to the underlying
allocator such as buddy or cma is performed in two steps:
- remove_hugetlb_folio() is called to remove the folio from hugetlb
lists, get a ref on the page and remove hugetlb destructor. This
all must be done under the hugetlb lock. After this call, the page
can be treated as a normal compound page or a collection of base
size pages.
- update_and_free_hugetlb_folio() is called to allocate vmemmap if
needed and the free routine of the underlying allocator is called
on the resulting page. We can not hold the hugetlb lock here.
One issue with this scheme is that a memory error could occur between
these two steps. In this case, the memory error handling code treats
the old hugetlb page as a normal compound page or collection of base
pages. It will then try to SetPageHWPoison(page) on the page with an
error. If the page with error is a tail page without vmemmap, a write
error will occur when trying to set the flag.
Address this issue by modifying remove_hugetlb_folio() and
update_and_free_hugetlb_folio() such that the hugetlb destructor is not
cleared until after allocating vmemmap. Since clearing the destructor
requires holding the hugetlb lock, the clearing is done in
remove_hugetlb_folio() if the vmemmap is present. This saves a
lock/unlock cycle. Otherwise, destructor is cleared in
update_and_free_hugetlb_folio() after allocating vmemmap.
Note that this will leave hugetlb pages in a state where they are marked
free (by hugetlb specific page flag) and have a ref count. This is not
a normal state. The only code that would notice is the memory error
code, and it is set up to retry in such a case.
A subsequent patch will create a routine to do bulk processing of
vmemmap allocation. This will eliminate a lock/unlock cycle for each
hugetlb page in the case where we are freeing a large number of pages.
Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com
Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-11 22:09:41 +00:00
|
|
|
* pages. Otherwise, someone (memory error handling) may try to write
|
|
|
|
* to tail struct pages.
|
|
|
|
*/
|
|
|
|
if (!folio_test_hugetlb_vmemmap_optimized(folio))
|
2024-03-21 14:24:47 +00:00
|
|
|
__folio_clear_hugetlb(folio);
|
hugetlb: do not clear hugetlb dtor until allocating vmemmap
Patch series "Fix hugetlb free path race with memory errors".
In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on
HWPOISON hugepages" the race window was discovered.
https://lore.kernel.org/linux-mm/20230616233447.GB7371@monkey/
Freeing a hugetlb page back to low level memory allocators is performed
in two steps.
1) Under hugetlb lock, remove page from hugetlb lists and clear destructor
2) Outside lock, allocate vmemmap if necessary and call low level free
Between these two steps, the hugetlb page will appear as a normal
compound page. However, vmemmap for tail pages could be missing.
If a memory error occurs at this time, we could try to update page
flags non-existant page structs.
A much more detailed description is in the first patch.
The first patch addresses the race window. However, it adds a
hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page
free operation. This could lead to slowdowns if one is freeing a large
number of hugetlb pages.
The second path optimizes the update_and_free_pages_bulk routine to only
take the lock once in bulk operations.
The second patch is technically not a bug fix, but includes a Fixes tag
and Cc stable to avoid a performance regression. It can be combined with
the first, but was done separately make reviewing easier.
This patch (of 2):
Freeing a hugetlb page and releasing base pages back to the underlying
allocator such as buddy or cma is performed in two steps:
- remove_hugetlb_folio() is called to remove the folio from hugetlb
lists, get a ref on the page and remove hugetlb destructor. This
all must be done under the hugetlb lock. After this call, the page
can be treated as a normal compound page or a collection of base
size pages.
- update_and_free_hugetlb_folio() is called to allocate vmemmap if
needed and the free routine of the underlying allocator is called
on the resulting page. We can not hold the hugetlb lock here.
One issue with this scheme is that a memory error could occur between
these two steps. In this case, the memory error handling code treats
the old hugetlb page as a normal compound page or collection of base
pages. It will then try to SetPageHWPoison(page) on the page with an
error. If the page with error is a tail page without vmemmap, a write
error will occur when trying to set the flag.
Address this issue by modifying remove_hugetlb_folio() and
update_and_free_hugetlb_folio() such that the hugetlb destructor is not
cleared until after allocating vmemmap. Since clearing the destructor
requires holding the hugetlb lock, the clearing is done in
remove_hugetlb_folio() if the vmemmap is present. This saves a
lock/unlock cycle. Otherwise, destructor is cleared in
update_and_free_hugetlb_folio() after allocating vmemmap.
Note that this will leave hugetlb pages in a state where they are marked
free (by hugetlb specific page flag) and have a ref count. This is not
a normal state. The only code that would notice is the memory error
code, and it is set up to retry in such a case.
A subsequent patch will create a routine to do bulk processing of
vmemmap allocation. This will eliminate a lock/unlock cycle for each
hugetlb page in the case where we are freeing a large number of pages.
Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com
Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-11 22:09:41 +00:00
|
|
|
|
2021-05-05 01:34:55 +00:00
|
|
|
h->nr_huge_pages--;
|
|
|
|
h->nr_huge_pages_node[nid]--;
|
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:35 +00:00
|
|
|
static void add_hugetlb_folio(struct hstate *h, struct folio *folio,
|
2021-07-01 01:47:21 +00:00
|
|
|
bool adjust_surplus)
|
|
|
|
{
|
2022-11-29 22:50:35 +00:00
|
|
|
int nid = folio_nid(folio);
|
2021-07-01 01:47:21 +00:00
|
|
|
|
2022-11-29 22:50:35 +00:00
|
|
|
VM_BUG_ON_FOLIO(!folio_test_hugetlb_vmemmap_optimized(folio), folio);
|
2021-07-01 01:47:21 +00:00
|
|
|
|
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
|
|
|
|
2022-11-29 22:50:35 +00:00
|
|
|
INIT_LIST_HEAD(&folio->lru);
|
2021-07-01 01:47:21 +00:00
|
|
|
h->nr_huge_pages++;
|
|
|
|
h->nr_huge_pages_node[nid]++;
|
|
|
|
|
|
|
|
if (adjust_surplus) {
|
|
|
|
h->surplus_huge_pages++;
|
|
|
|
h->surplus_huge_pages_node[nid]++;
|
|
|
|
}
|
|
|
|
|
2024-03-21 14:24:43 +00:00
|
|
|
__folio_set_hugetlb(folio);
|
2022-11-29 22:50:35 +00:00
|
|
|
folio_change_private(folio, NULL);
|
2022-09-01 12:00:28 +00:00
|
|
|
/*
|
2022-11-29 22:50:35 +00:00
|
|
|
* We have to set hugetlb_vmemmap_optimized again as above
|
|
|
|
* folio_change_private(folio, NULL) cleared it.
|
2022-09-01 12:00:28 +00:00
|
|
|
*/
|
2022-11-29 22:50:35 +00:00
|
|
|
folio_set_hugetlb_vmemmap_optimized(folio);
|
2021-07-01 01:47:21 +00:00
|
|
|
|
2024-03-26 17:10:29 +00:00
|
|
|
arch_clear_hugetlb_flags(folio);
|
2022-11-29 22:50:36 +00:00
|
|
|
enqueue_hugetlb_folio(h, folio);
|
2021-07-01 01:47:21 +00:00
|
|
|
}
|
|
|
|
|
2023-01-13 22:30:51 +00:00
|
|
|
static void __update_and_free_hugetlb_folio(struct hstate *h,
|
|
|
|
struct folio *folio)
|
hugetlb: Move update_and_free_page
Dynamic huge page pool resizing.
In most real-world scenarios, configuring the size of the hugetlb pool
correctly is a difficult task. If too few pages are allocated to the pool,
applications using MAP_SHARED may fail to mmap() a hugepage region and
applications using MAP_PRIVATE may receive SIGBUS. Isolating too much memory
in the hugetlb pool means it is not available for other uses, especially those
programs not using huge pages.
The obvious answer is to let the hugetlb pool grow and shrink in response to
the runtime demand for huge pages. The work Mel Gorman has been doing to
establish a memory zone for movable memory allocations makes dynamically
resizing the hugetlb pool reliable within the limits of that zone. This patch
series implements dynamic pool resizing for private and shared mappings while
being careful to maintain existing semantics. Please reply with your comments
and feedback; even just to say whether it would be a useful feature to you.
Thanks.
How it works
============
Upon depletion of the hugetlb pool, rather than reporting an error immediately,
first try and allocate the needed huge pages directly from the buddy allocator.
Care must be taken to avoid unbounded growth of the hugetlb pool, so the
hugetlb filesystem quota is used to limit overall pool size.
The real work begins when we decide there is a shortage of huge pages. What
happens next depends on whether the pages are for a private or shared mapping.
Private mappings are straightforward. At fault time, if alloc_huge_page()
fails, we allocate a page from the buddy allocator and increment the source
node's surplus_huge_pages counter. When free_huge_page() is called for a page
on a node with a surplus, the page is freed directly to the buddy allocator
instead of the hugetlb pool.
Because shared mappings require all of the pages to be reserved up front, some
additional work must be done at mmap() to support them. We determine the
reservation shortage and allocate the required number of pages all at once.
These pages are then added to the hugetlb pool and marked reserved. Where that
is not possible the mmap() will fail. As with private mappings, the
appropriate surplus counters are updated. Since reserved huge pages won't
necessarily be used by the process, we can't be sure that free_huge_page() will
always be called to return surplus pages to the buddy allocator. To prevent
the huge page pool from bloating, we must free unused surplus pages when their
reservation has ended.
Controlling it
==============
With the entire patch series applied, pool resizing is off by default so unless
specific action is taken, the semantics are unchanged.
To take advantage of the flexibility afforded by this patch series one must
tolerate a change in semantics. To control hugetlb pool growth, the following
techniques can be employed:
* A sysctl tunable to enable/disable the feature entirely
* The size= mount option for hugetlbfs filesystems to limit pool size
Performance
===========
When contiguous memory is readily available, it is expected that the cost of
dynamicly resizing the pool will be small. This series has been performance
tested with 'stream' to measure this cost.
Stream (http://www.cs.virginia.edu/stream/) was linked with libhugetlbfs to
enable remapping of the text and data/bss segments into huge pages.
Stream with small array
-----------------------
Baseline: nr_hugepages = 0, No libhugetlbfs segment remapping
Preallocated: nr_hugepages = 5, Text and data/bss remapping
Dynamic: nr_hugepages = 0, Text and data/bss remapping
Rate (MB/s)
Function Baseline Preallocated Dynamic
Copy: 4695.6266 5942.8371 5982.2287
Scale: 4451.5776 5017.1419 5658.7843
Add: 5815.8849 7927.7827 8119.3552
Triad: 5949.4144 8527.6492 8110.6903
Stream with large array
-----------------------
Baseline: nr_hugepages = 0, No libhugetlbfs segment remapping
Preallocated: nr_hugepages = 67, Text and data/bss remapping
Dynamic: nr_hugepages = 0, Text and data/bss remapping
Rate (MB/s)
Function Baseline Preallocated Dynamic
Copy: 2227.8281 2544.2732 2546.4947
Scale: 2136.3208 2430.7294 2421.2074
Add: 2773.1449 4004.0021 3999.4331
Triad: 2748.4502 3777.0109 3773.4970
* All numbers are averages taken from 10 consecutive runs with a maximum
standard deviation of 1.3 percent noted.
This patch:
Simply move update_and_free_page() so that it can be reused later in this
patch series. The implementation is not changed.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Dave McCracken <dave.mccracken@oracle.com>
Acked-by: William Irwin <bill.irwin@oracle.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:26:16 +00:00
|
|
|
{
|
2024-03-21 14:24:47 +00:00
|
|
|
bool clear_flag = folio_test_hugetlb_vmemmap_optimized(folio);
|
2008-07-24 04:27:41 +00:00
|
|
|
|
2019-05-14 00:19:04 +00:00
|
|
|
if (hstate_is_gigantic(h) && !gigantic_page_runtime_supported())
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
return;
|
2008-11-06 20:53:27 +00:00
|
|
|
|
mm, hwpoison, hugetlb: support saving mechanism of raw error pages
When handling memory error on a hugetlb page, the error handler tries to
dissolve and turn it into 4kB pages. If it's successfully dissolved,
PageHWPoison flag is moved to the raw error page, so that's all right.
However, dissolve sometimes fails, then the error page is left as
hwpoisoned hugepage. It's useful if we can retry to dissolve it to save
healthy pages, but that's not possible now because the information about
where the raw error pages is lost.
Use the private field of a few tail pages to keep that information. The
code path of shrinking hugepage pool uses this info to try delayed
dissolve. In order to remember multiple errors in a hugepage, a
singly-linked list originated from SUBPAGE_INDEX_HWPOISON-th tail page is
constructed. Only simple operations (adding an entry or clearing all) are
required and the list is assumed not to be very long, so this simple data
structure should be enough.
If we failed to save raw error info, the hwpoison hugepage has errors on
unknown subpage, then this new saving mechanism does not work any more, so
disable saving new raw error info and freeing hwpoison hugepages.
Link: https://lkml.kernel.org/r/20220714042420.1847125-4-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-14 04:24:15 +00:00
|
|
|
/*
|
|
|
|
* If we don't know which subpages are hwpoisoned, we can't free
|
|
|
|
* the hugepage, so it's leaked intentionally.
|
|
|
|
*/
|
2022-11-29 22:50:37 +00:00
|
|
|
if (folio_test_hugetlb_raw_hwp_unreliable(folio))
|
mm, hwpoison, hugetlb: support saving mechanism of raw error pages
When handling memory error on a hugetlb page, the error handler tries to
dissolve and turn it into 4kB pages. If it's successfully dissolved,
PageHWPoison flag is moved to the raw error page, so that's all right.
However, dissolve sometimes fails, then the error page is left as
hwpoisoned hugepage. It's useful if we can retry to dissolve it to save
healthy pages, but that's not possible now because the information about
where the raw error pages is lost.
Use the private field of a few tail pages to keep that information. The
code path of shrinking hugepage pool uses this info to try delayed
dissolve. In order to remember multiple errors in a hugepage, a
singly-linked list originated from SUBPAGE_INDEX_HWPOISON-th tail page is
constructed. Only simple operations (adding an entry or clearing all) are
required and the list is assumed not to be very long, so this simple data
structure should be enough.
If we failed to save raw error info, the hwpoison hugepage has errors on
unknown subpage, then this new saving mechanism does not work any more, so
disable saving new raw error info and freeing hwpoison hugepages.
Link: https://lkml.kernel.org/r/20220714042420.1847125-4-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-14 04:24:15 +00:00
|
|
|
return;
|
|
|
|
|
2023-08-29 21:37:34 +00:00
|
|
|
/*
|
2024-03-21 14:24:47 +00:00
|
|
|
* If folio is not vmemmap optimized (!clear_flag), then the folio
|
2023-10-11 14:45:57 +00:00
|
|
|
* is no longer identified as a hugetlb page. hugetlb_vmemmap_restore_folio
|
2023-08-29 21:37:34 +00:00
|
|
|
* can only be passed hugetlb pages and will BUG otherwise.
|
|
|
|
*/
|
2024-03-21 14:24:47 +00:00
|
|
|
if (clear_flag && hugetlb_vmemmap_restore_folio(h, folio)) {
|
2021-07-01 01:47:21 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
|
|
|
/*
|
|
|
|
* If we cannot allocate vmemmap pages, just refuse to free the
|
|
|
|
* page and put the page back on the hugetlb free list and treat
|
|
|
|
* as a surplus page.
|
|
|
|
*/
|
2022-11-29 22:50:37 +00:00
|
|
|
add_hugetlb_folio(h, folio, true);
|
2021-07-01 01:47:21 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
hugetlb: do not clear hugetlb dtor until allocating vmemmap
Patch series "Fix hugetlb free path race with memory errors".
In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on
HWPOISON hugepages" the race window was discovered.
https://lore.kernel.org/linux-mm/20230616233447.GB7371@monkey/
Freeing a hugetlb page back to low level memory allocators is performed
in two steps.
1) Under hugetlb lock, remove page from hugetlb lists and clear destructor
2) Outside lock, allocate vmemmap if necessary and call low level free
Between these two steps, the hugetlb page will appear as a normal
compound page. However, vmemmap for tail pages could be missing.
If a memory error occurs at this time, we could try to update page
flags non-existant page structs.
A much more detailed description is in the first patch.
The first patch addresses the race window. However, it adds a
hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page
free operation. This could lead to slowdowns if one is freeing a large
number of hugetlb pages.
The second path optimizes the update_and_free_pages_bulk routine to only
take the lock once in bulk operations.
The second patch is technically not a bug fix, but includes a Fixes tag
and Cc stable to avoid a performance regression. It can be combined with
the first, but was done separately make reviewing easier.
This patch (of 2):
Freeing a hugetlb page and releasing base pages back to the underlying
allocator such as buddy or cma is performed in two steps:
- remove_hugetlb_folio() is called to remove the folio from hugetlb
lists, get a ref on the page and remove hugetlb destructor. This
all must be done under the hugetlb lock. After this call, the page
can be treated as a normal compound page or a collection of base
size pages.
- update_and_free_hugetlb_folio() is called to allocate vmemmap if
needed and the free routine of the underlying allocator is called
on the resulting page. We can not hold the hugetlb lock here.
One issue with this scheme is that a memory error could occur between
these two steps. In this case, the memory error handling code treats
the old hugetlb page as a normal compound page or collection of base
pages. It will then try to SetPageHWPoison(page) on the page with an
error. If the page with error is a tail page without vmemmap, a write
error will occur when trying to set the flag.
Address this issue by modifying remove_hugetlb_folio() and
update_and_free_hugetlb_folio() such that the hugetlb destructor is not
cleared until after allocating vmemmap. Since clearing the destructor
requires holding the hugetlb lock, the clearing is done in
remove_hugetlb_folio() if the vmemmap is present. This saves a
lock/unlock cycle. Otherwise, destructor is cleared in
update_and_free_hugetlb_folio() after allocating vmemmap.
Note that this will leave hugetlb pages in a state where they are marked
free (by hugetlb specific page flag) and have a ref count. This is not
a normal state. The only code that would notice is the memory error
code, and it is set up to retry in such a case.
A subsequent patch will create a routine to do bulk processing of
vmemmap allocation. This will eliminate a lock/unlock cycle for each
hugetlb page in the case where we are freeing a large number of pages.
Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com
Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-11 22:09:41 +00:00
|
|
|
/*
|
|
|
|
* If vmemmap pages were allocated above, then we need to clear the
|
2024-03-21 14:24:47 +00:00
|
|
|
* hugetlb flag under the hugetlb lock.
|
hugetlb: do not clear hugetlb dtor until allocating vmemmap
Patch series "Fix hugetlb free path race with memory errors".
In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on
HWPOISON hugepages" the race window was discovered.
https://lore.kernel.org/linux-mm/20230616233447.GB7371@monkey/
Freeing a hugetlb page back to low level memory allocators is performed
in two steps.
1) Under hugetlb lock, remove page from hugetlb lists and clear destructor
2) Outside lock, allocate vmemmap if necessary and call low level free
Between these two steps, the hugetlb page will appear as a normal
compound page. However, vmemmap for tail pages could be missing.
If a memory error occurs at this time, we could try to update page
flags non-existant page structs.
A much more detailed description is in the first patch.
The first patch addresses the race window. However, it adds a
hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page
free operation. This could lead to slowdowns if one is freeing a large
number of hugetlb pages.
The second path optimizes the update_and_free_pages_bulk routine to only
take the lock once in bulk operations.
The second patch is technically not a bug fix, but includes a Fixes tag
and Cc stable to avoid a performance regression. It can be combined with
the first, but was done separately make reviewing easier.
This patch (of 2):
Freeing a hugetlb page and releasing base pages back to the underlying
allocator such as buddy or cma is performed in two steps:
- remove_hugetlb_folio() is called to remove the folio from hugetlb
lists, get a ref on the page and remove hugetlb destructor. This
all must be done under the hugetlb lock. After this call, the page
can be treated as a normal compound page or a collection of base
size pages.
- update_and_free_hugetlb_folio() is called to allocate vmemmap if
needed and the free routine of the underlying allocator is called
on the resulting page. We can not hold the hugetlb lock here.
One issue with this scheme is that a memory error could occur between
these two steps. In this case, the memory error handling code treats
the old hugetlb page as a normal compound page or collection of base
pages. It will then try to SetPageHWPoison(page) on the page with an
error. If the page with error is a tail page without vmemmap, a write
error will occur when trying to set the flag.
Address this issue by modifying remove_hugetlb_folio() and
update_and_free_hugetlb_folio() such that the hugetlb destructor is not
cleared until after allocating vmemmap. Since clearing the destructor
requires holding the hugetlb lock, the clearing is done in
remove_hugetlb_folio() if the vmemmap is present. This saves a
lock/unlock cycle. Otherwise, destructor is cleared in
update_and_free_hugetlb_folio() after allocating vmemmap.
Note that this will leave hugetlb pages in a state where they are marked
free (by hugetlb specific page flag) and have a ref count. This is not
a normal state. The only code that would notice is the memory error
code, and it is set up to retry in such a case.
A subsequent patch will create a routine to do bulk processing of
vmemmap allocation. This will eliminate a lock/unlock cycle for each
hugetlb page in the case where we are freeing a large number of pages.
Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com
Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-11 22:09:41 +00:00
|
|
|
*/
|
2024-04-19 08:58:19 +00:00
|
|
|
if (folio_test_hugetlb(folio)) {
|
hugetlb: do not clear hugetlb dtor until allocating vmemmap
Patch series "Fix hugetlb free path race with memory errors".
In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on
HWPOISON hugepages" the race window was discovered.
https://lore.kernel.org/linux-mm/20230616233447.GB7371@monkey/
Freeing a hugetlb page back to low level memory allocators is performed
in two steps.
1) Under hugetlb lock, remove page from hugetlb lists and clear destructor
2) Outside lock, allocate vmemmap if necessary and call low level free
Between these two steps, the hugetlb page will appear as a normal
compound page. However, vmemmap for tail pages could be missing.
If a memory error occurs at this time, we could try to update page
flags non-existant page structs.
A much more detailed description is in the first patch.
The first patch addresses the race window. However, it adds a
hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page
free operation. This could lead to slowdowns if one is freeing a large
number of hugetlb pages.
The second path optimizes the update_and_free_pages_bulk routine to only
take the lock once in bulk operations.
The second patch is technically not a bug fix, but includes a Fixes tag
and Cc stable to avoid a performance regression. It can be combined with
the first, but was done separately make reviewing easier.
This patch (of 2):
Freeing a hugetlb page and releasing base pages back to the underlying
allocator such as buddy or cma is performed in two steps:
- remove_hugetlb_folio() is called to remove the folio from hugetlb
lists, get a ref on the page and remove hugetlb destructor. This
all must be done under the hugetlb lock. After this call, the page
can be treated as a normal compound page or a collection of base
size pages.
- update_and_free_hugetlb_folio() is called to allocate vmemmap if
needed and the free routine of the underlying allocator is called
on the resulting page. We can not hold the hugetlb lock here.
One issue with this scheme is that a memory error could occur between
these two steps. In this case, the memory error handling code treats
the old hugetlb page as a normal compound page or collection of base
pages. It will then try to SetPageHWPoison(page) on the page with an
error. If the page with error is a tail page without vmemmap, a write
error will occur when trying to set the flag.
Address this issue by modifying remove_hugetlb_folio() and
update_and_free_hugetlb_folio() such that the hugetlb destructor is not
cleared until after allocating vmemmap. Since clearing the destructor
requires holding the hugetlb lock, the clearing is done in
remove_hugetlb_folio() if the vmemmap is present. This saves a
lock/unlock cycle. Otherwise, destructor is cleared in
update_and_free_hugetlb_folio() after allocating vmemmap.
Note that this will leave hugetlb pages in a state where they are marked
free (by hugetlb specific page flag) and have a ref count. This is not
a normal state. The only code that would notice is the memory error
code, and it is set up to retry in such a case.
A subsequent patch will create a routine to do bulk processing of
vmemmap allocation. This will eliminate a lock/unlock cycle for each
hugetlb page in the case where we are freeing a large number of pages.
Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com
Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-11 22:09:41 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2024-03-21 14:24:47 +00:00
|
|
|
__folio_clear_hugetlb(folio);
|
hugetlb: do not clear hugetlb dtor until allocating vmemmap
Patch series "Fix hugetlb free path race with memory errors".
In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on
HWPOISON hugepages" the race window was discovered.
https://lore.kernel.org/linux-mm/20230616233447.GB7371@monkey/
Freeing a hugetlb page back to low level memory allocators is performed
in two steps.
1) Under hugetlb lock, remove page from hugetlb lists and clear destructor
2) Outside lock, allocate vmemmap if necessary and call low level free
Between these two steps, the hugetlb page will appear as a normal
compound page. However, vmemmap for tail pages could be missing.
If a memory error occurs at this time, we could try to update page
flags non-existant page structs.
A much more detailed description is in the first patch.
The first patch addresses the race window. However, it adds a
hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page
free operation. This could lead to slowdowns if one is freeing a large
number of hugetlb pages.
The second path optimizes the update_and_free_pages_bulk routine to only
take the lock once in bulk operations.
The second patch is technically not a bug fix, but includes a Fixes tag
and Cc stable to avoid a performance regression. It can be combined with
the first, but was done separately make reviewing easier.
This patch (of 2):
Freeing a hugetlb page and releasing base pages back to the underlying
allocator such as buddy or cma is performed in two steps:
- remove_hugetlb_folio() is called to remove the folio from hugetlb
lists, get a ref on the page and remove hugetlb destructor. This
all must be done under the hugetlb lock. After this call, the page
can be treated as a normal compound page or a collection of base
size pages.
- update_and_free_hugetlb_folio() is called to allocate vmemmap if
needed and the free routine of the underlying allocator is called
on the resulting page. We can not hold the hugetlb lock here.
One issue with this scheme is that a memory error could occur between
these two steps. In this case, the memory error handling code treats
the old hugetlb page as a normal compound page or collection of base
pages. It will then try to SetPageHWPoison(page) on the page with an
error. If the page with error is a tail page without vmemmap, a write
error will occur when trying to set the flag.
Address this issue by modifying remove_hugetlb_folio() and
update_and_free_hugetlb_folio() such that the hugetlb destructor is not
cleared until after allocating vmemmap. Since clearing the destructor
requires holding the hugetlb lock, the clearing is done in
remove_hugetlb_folio() if the vmemmap is present. This saves a
lock/unlock cycle. Otherwise, destructor is cleared in
update_and_free_hugetlb_folio() after allocating vmemmap.
Note that this will leave hugetlb pages in a state where they are marked
free (by hugetlb specific page flag) and have a ref count. This is not
a normal state. The only code that would notice is the memory error
code, and it is set up to retry in such a case.
A subsequent patch will create a routine to do bulk processing of
vmemmap allocation. This will eliminate a lock/unlock cycle for each
hugetlb page in the case where we are freeing a large number of pages.
Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com
Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-11 22:09:41 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
}
|
|
|
|
|
2024-07-08 02:51:27 +00:00
|
|
|
/*
|
|
|
|
* Move PageHWPoison flag from head page to the raw error pages,
|
|
|
|
* which makes any healthy subpages reusable.
|
|
|
|
*/
|
|
|
|
if (unlikely(folio_test_hwpoison(folio)))
|
|
|
|
folio_clear_hugetlb_hwpoison(folio);
|
|
|
|
|
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
While investigating HVO for THPs [1], it turns out that speculative PFN
walkers like compaction can race with vmemmap modifications, e.g.,
CPU 1 (vmemmap modifier) CPU 2 (speculative PFN walker)
------------------------------- ------------------------------
Allocates an LRU folio page1
Sees page1
Frees page1
Allocates a hugeTLB folio page2
(page1 being a tail of page2)
Updates vmemmap mapping page1
get_page_unless_zero(page1)
Even though page1->_refcount is zero after HVO, get_page_unless_zero() can
still try to modify this read-only field, resulting in a crash.
An independent report [2] confirmed this race.
There are two discussed approaches to fix this race:
1. Make RO vmemmap RW so that get_page_unless_zero() can fail without
triggering a PF.
2. Use RCU to make sure get_page_unless_zero() either sees zero
page->_refcount through the old vmemmap or non-zero page->_refcount
through the new one.
The second approach is preferred here because:
1. It can prevent illegal modifications to struct page[] that has been
HVO'ed;
2. It can be generalized, in a way similar to ZERO_PAGE(), to fix
similar races in other places, e.g., arch_remove_memory() on x86
[3], which frees vmemmap mapping offlined struct page[].
While adding synchronize_rcu(), the goal is to be surgical, rather than
optimized. Specifically, calls to synchronize_rcu() on the error handling
paths can be coalesced, but it is not done for the sake of Simplicity:
noticeably, this fix removes ~50% more lines than it adds.
According to the hugetlb_optimize_vmemmap section in
Documentation/admin-guide/sysctl/vm.rst, enabling HVO makes allocating or
freeing hugeTLB pages "~2x slower than before". Having synchronize_rcu()
on top makes those operations even worse, and this also affects the user
interface /proc/sys/vm/nr_overcommit_hugepages.
This is *very* hard to trigger:
1. Most hugeTLB use cases I know of are static, i.e., reserved at
boot time, because allocating at runtime is not reliable at all.
2. On top of that, someone has to be very unlucky to get tripped
over above, because the race window is so small -- I wasn't able to
trigger it with a stress testing that does nothing but that (with
THPs though).
[1] https://lore.kernel.org/20240229183436.4110845-4-yuzhao@google.com/
[2] https://lore.kernel.org/917FFC7F-0615-44DD-90EE-9F85F8EA9974@linux.dev/
[3] https://lore.kernel.org/be130a96-a27e-4240-ad78-776802f57cad@redhat.com/
Link: https://lkml.kernel.org/r/20240627222705.2974207-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-27 22:27:05 +00:00
|
|
|
folio_ref_unfreeze(folio, 1);
|
|
|
|
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
/*
|
|
|
|
* Non-gigantic pages demoted from CMA allocated gigantic pages
|
2022-11-29 22:50:37 +00:00
|
|
|
* need to be given back to CMA in free_gigantic_folio.
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
*/
|
|
|
|
if (hstate_is_gigantic(h) ||
|
2022-11-29 22:50:35 +00:00
|
|
|
hugetlb_cma_folio(folio, huge_page_order(h))) {
|
2022-11-29 22:50:31 +00:00
|
|
|
destroy_compound_gigantic_folio(folio, huge_page_order(h));
|
2022-11-29 22:50:37 +00:00
|
|
|
free_gigantic_folio(folio, huge_page_order(h));
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
} else {
|
2024-03-21 14:24:39 +00:00
|
|
|
INIT_LIST_HEAD(&folio->_deferred_list);
|
|
|
|
folio_put(folio);
|
hugetlb: add support for gigantic page allocation at runtime
HugeTLB is limited to allocating hugepages whose size are less than
MAX_ORDER order. This is so because HugeTLB allocates hugepages via the
buddy allocator. Gigantic pages (that is, pages whose size is greater
than MAX_ORDER order) have to be allocated at boottime.
However, boottime allocation has at least two serious problems. First,
it doesn't support NUMA and second, gigantic pages allocated at boottime
can't be freed.
This commit solves both issues by adding support for allocating gigantic
pages during runtime. It works just like regular sized hugepages,
meaning that the interface in sysfs is the same, it supports NUMA, and
gigantic pages can be freed.
For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
gigantic pages on node 1, one can do:
# echo 2 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
And to free them all:
# echo 0 > \
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
The one problem with gigantic page allocation at runtime is that it
can't be serviced by the buddy allocator. To overcome that problem,
this commit scans all zones from a node looking for a large enough
contiguous region. When one is found, it's allocated by using CMA, that
is, we call alloc_contig_range() to do the actual allocation. For
example, on x86_64 we scan all zones looking for a 1GB contiguous
region. When one is found, it's allocated by alloc_contig_range().
One expected issue with that approach is that such gigantic contiguous
regions tend to vanish as runtime goes by. The best way to avoid this
for now is to make gigantic page allocations very early during system
boot, say from a init script. Other possible optimization include using
compaction, which is supported by CMA but is not explicitly used by this
commit.
It's also important to note the following:
1. Gigantic pages allocated at boottime by the hugepages= command-line
option can be freed at runtime just fine
2. This commit adds support for gigantic pages only to x86_64. The
reason is that I don't have access to nor experience with other archs.
The code is arch indepedent though, so it should be simple to add
support to different archs
3. I didn't add support for hugepage overcommit, that is allocating
a gigantic page on demand when
/proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
think it's reasonable to do the hard and long work required for
allocating a gigantic page at fault time. But it should be simple
to add this if wanted
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:07:13 +00:00
|
|
|
}
|
hugetlb: Move update_and_free_page
Dynamic huge page pool resizing.
In most real-world scenarios, configuring the size of the hugetlb pool
correctly is a difficult task. If too few pages are allocated to the pool,
applications using MAP_SHARED may fail to mmap() a hugepage region and
applications using MAP_PRIVATE may receive SIGBUS. Isolating too much memory
in the hugetlb pool means it is not available for other uses, especially those
programs not using huge pages.
The obvious answer is to let the hugetlb pool grow and shrink in response to
the runtime demand for huge pages. The work Mel Gorman has been doing to
establish a memory zone for movable memory allocations makes dynamically
resizing the hugetlb pool reliable within the limits of that zone. This patch
series implements dynamic pool resizing for private and shared mappings while
being careful to maintain existing semantics. Please reply with your comments
and feedback; even just to say whether it would be a useful feature to you.
Thanks.
How it works
============
Upon depletion of the hugetlb pool, rather than reporting an error immediately,
first try and allocate the needed huge pages directly from the buddy allocator.
Care must be taken to avoid unbounded growth of the hugetlb pool, so the
hugetlb filesystem quota is used to limit overall pool size.
The real work begins when we decide there is a shortage of huge pages. What
happens next depends on whether the pages are for a private or shared mapping.
Private mappings are straightforward. At fault time, if alloc_huge_page()
fails, we allocate a page from the buddy allocator and increment the source
node's surplus_huge_pages counter. When free_huge_page() is called for a page
on a node with a surplus, the page is freed directly to the buddy allocator
instead of the hugetlb pool.
Because shared mappings require all of the pages to be reserved up front, some
additional work must be done at mmap() to support them. We determine the
reservation shortage and allocate the required number of pages all at once.
These pages are then added to the hugetlb pool and marked reserved. Where that
is not possible the mmap() will fail. As with private mappings, the
appropriate surplus counters are updated. Since reserved huge pages won't
necessarily be used by the process, we can't be sure that free_huge_page() will
always be called to return surplus pages to the buddy allocator. To prevent
the huge page pool from bloating, we must free unused surplus pages when their
reservation has ended.
Controlling it
==============
With the entire patch series applied, pool resizing is off by default so unless
specific action is taken, the semantics are unchanged.
To take advantage of the flexibility afforded by this patch series one must
tolerate a change in semantics. To control hugetlb pool growth, the following
techniques can be employed:
* A sysctl tunable to enable/disable the feature entirely
* The size= mount option for hugetlbfs filesystems to limit pool size
Performance
===========
When contiguous memory is readily available, it is expected that the cost of
dynamicly resizing the pool will be small. This series has been performance
tested with 'stream' to measure this cost.
Stream (http://www.cs.virginia.edu/stream/) was linked with libhugetlbfs to
enable remapping of the text and data/bss segments into huge pages.
Stream with small array
-----------------------
Baseline: nr_hugepages = 0, No libhugetlbfs segment remapping
Preallocated: nr_hugepages = 5, Text and data/bss remapping
Dynamic: nr_hugepages = 0, Text and data/bss remapping
Rate (MB/s)
Function Baseline Preallocated Dynamic
Copy: 4695.6266 5942.8371 5982.2287
Scale: 4451.5776 5017.1419 5658.7843
Add: 5815.8849 7927.7827 8119.3552
Triad: 5949.4144 8527.6492 8110.6903
Stream with large array
-----------------------
Baseline: nr_hugepages = 0, No libhugetlbfs segment remapping
Preallocated: nr_hugepages = 67, Text and data/bss remapping
Dynamic: nr_hugepages = 0, Text and data/bss remapping
Rate (MB/s)
Function Baseline Preallocated Dynamic
Copy: 2227.8281 2544.2732 2546.4947
Scale: 2136.3208 2430.7294 2421.2074
Add: 2773.1449 4004.0021 3999.4331
Triad: 2748.4502 3777.0109 3773.4970
* All numbers are averages taken from 10 consecutive runs with a maximum
standard deviation of 1.3 percent noted.
This patch:
Simply move update_and_free_page() so that it can be reused later in this
patch series. The implementation is not changed.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Dave McCracken <dave.mccracken@oracle.com>
Acked-by: William Irwin <bill.irwin@oracle.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:26:16 +00:00
|
|
|
}
|
|
|
|
|
2021-07-01 01:47:17 +00:00
|
|
|
/*
|
2022-11-29 22:50:34 +00:00
|
|
|
* As update_and_free_hugetlb_folio() can be called under any context, so we cannot
|
2021-07-01 01:47:17 +00:00
|
|
|
* use GFP_KERNEL to allocate vmemmap pages. However, we can defer the
|
|
|
|
* actual freeing in a workqueue to prevent from using GFP_ATOMIC to allocate
|
|
|
|
* the vmemmap pages.
|
|
|
|
*
|
|
|
|
* free_hpage_workfn() locklessly retrieves the linked list of pages to be
|
|
|
|
* freed and frees them one-by-one. As the page->mapping pointer is going
|
|
|
|
* to be cleared in free_hpage_workfn() anyway, it is reused as the llist_node
|
|
|
|
* structure of a lockless linked list of huge pages to be freed.
|
|
|
|
*/
|
|
|
|
static LLIST_HEAD(hpage_freelist);
|
|
|
|
|
|
|
|
static void free_hpage_workfn(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct llist_node *node;
|
|
|
|
|
|
|
|
node = llist_del_all(&hpage_freelist);
|
|
|
|
|
|
|
|
while (node) {
|
2023-08-24 14:13:23 +00:00
|
|
|
struct folio *folio;
|
2021-07-01 01:47:17 +00:00
|
|
|
struct hstate *h;
|
|
|
|
|
2023-08-24 14:13:23 +00:00
|
|
|
folio = container_of((struct address_space **)node,
|
|
|
|
struct folio, mapping);
|
2021-07-01 01:47:17 +00:00
|
|
|
node = node->next;
|
2023-08-24 14:13:23 +00:00
|
|
|
folio->mapping = NULL;
|
2021-07-01 01:47:17 +00:00
|
|
|
/*
|
2023-07-19 18:41:45 +00:00
|
|
|
* The VM_BUG_ON_FOLIO(!folio_test_hugetlb(folio), folio) in
|
|
|
|
* folio_hstate() is going to trigger because a previous call to
|
2023-08-16 15:11:55 +00:00
|
|
|
* remove_hugetlb_folio() will clear the hugetlb bit, so do
|
|
|
|
* not use folio_hstate() directly.
|
2021-07-01 01:47:17 +00:00
|
|
|
*/
|
2023-08-24 14:13:23 +00:00
|
|
|
h = size_to_hstate(folio_size(folio));
|
2021-07-01 01:47:17 +00:00
|
|
|
|
2023-08-24 14:13:23 +00:00
|
|
|
__update_and_free_hugetlb_folio(h, folio);
|
2021-07-01 01:47:17 +00:00
|
|
|
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
static DECLARE_WORK(free_hpage_work, free_hpage_workfn);
|
|
|
|
|
|
|
|
static inline void flush_free_hpage_work(struct hstate *h)
|
|
|
|
{
|
2022-06-28 09:22:33 +00:00
|
|
|
if (hugetlb_vmemmap_optimizable(h))
|
2021-07-01 01:47:17 +00:00
|
|
|
flush_work(&free_hpage_work);
|
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:34 +00:00
|
|
|
static void update_and_free_hugetlb_folio(struct hstate *h, struct folio *folio,
|
2021-07-01 01:47:17 +00:00
|
|
|
bool atomic)
|
|
|
|
{
|
2022-11-29 22:50:34 +00:00
|
|
|
if (!folio_test_hugetlb_vmemmap_optimized(folio) || !atomic) {
|
2023-01-13 22:30:51 +00:00
|
|
|
__update_and_free_hugetlb_folio(h, folio);
|
2021-07-01 01:47:17 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Defer freeing to avoid using GFP_ATOMIC to allocate vmemmap pages.
|
|
|
|
*
|
|
|
|
* Only call schedule_work() if hpage_freelist is previously
|
|
|
|
* empty. Otherwise, schedule_work() had been called but the workfn
|
|
|
|
* hasn't retrieved the list yet.
|
|
|
|
*/
|
2022-11-29 22:50:34 +00:00
|
|
|
if (llist_add((struct llist_node *)&folio->mapping, &hpage_freelist))
|
2021-07-01 01:47:17 +00:00
|
|
|
schedule_work(&free_hpage_work);
|
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:06 +00:00
|
|
|
static void bulk_vmemmap_restore_error(struct hstate *h,
|
|
|
|
struct list_head *folio_list,
|
|
|
|
struct list_head *non_hvo_folios)
|
2021-05-05 01:35:03 +00:00
|
|
|
{
|
2023-08-24 14:13:24 +00:00
|
|
|
struct folio *folio, *t_folio;
|
2021-05-05 01:35:03 +00:00
|
|
|
|
2023-10-19 02:31:06 +00:00
|
|
|
if (!list_empty(non_hvo_folios)) {
|
|
|
|
/*
|
|
|
|
* Free any restored hugetlb pages so that restore of the
|
|
|
|
* entire list can be retried.
|
|
|
|
* The idea is that in the common case of ENOMEM errors freeing
|
|
|
|
* hugetlb pages with vmemmap we will free up memory so that we
|
|
|
|
* can allocate vmemmap for more hugetlb pages.
|
|
|
|
*/
|
|
|
|
list_for_each_entry_safe(folio, t_folio, non_hvo_folios, lru) {
|
|
|
|
list_del(&folio->lru);
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2024-03-21 14:24:47 +00:00
|
|
|
__folio_clear_hugetlb(folio);
|
2023-10-19 02:31:06 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
update_and_free_hugetlb_folio(h, folio, false);
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* In the case where there are no folios which can be
|
|
|
|
* immediately freed, we loop through the list trying to restore
|
|
|
|
* vmemmap individually in the hope that someone elsewhere may
|
|
|
|
* have done something to cause success (such as freeing some
|
|
|
|
* memory). If unable to restore a hugetlb page, the hugetlb
|
|
|
|
* page is made a surplus page and removed from the list.
|
|
|
|
* If are able to restore vmemmap and free one hugetlb page, we
|
|
|
|
* quit processing the list to retry the bulk operation.
|
|
|
|
*/
|
|
|
|
list_for_each_entry_safe(folio, t_folio, folio_list, lru)
|
2023-10-11 14:45:57 +00:00
|
|
|
if (hugetlb_vmemmap_restore_folio(h, folio)) {
|
2023-10-19 02:31:06 +00:00
|
|
|
list_del(&folio->lru);
|
hugetlb: optimize update_and_free_pages_bulk to avoid lock cycles
Patch series "Batch hugetlb vmemmap modification operations", v8.
When hugetlb vmemmap optimization was introduced, the overhead of enabling
the option was measured as described in commit 426e5c429d16 [1]. The
summary states that allocating a hugetlb page should be ~2x slower with
optimization and freeing a hugetlb page should be ~2-3x slower. Such
overhead was deemed an acceptable trade off for the memory savings
obtained by freeing vmemmap pages.
It was recently reported that the overhead associated with enabling
vmemmap optimization could be as high as 190x for hugetlb page
allocations. Yes, 190x! Some actual numbers from other environments are:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.119s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.477s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m28.973s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m36.748s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.463s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m2.931s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 2m27.609s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 2m29.924s
In the VM environment, the slowdown of enabling hugetlb vmemmap optimization
resulted in allocation times being 61x slower.
A quick profile showed that the vast majority of this overhead was due to
TLB flushing. Each time we modify the kernel pagetable we need to flush
the TLB. For each hugetlb that is optimized, there could be potentially
two TLB flushes performed. One for the vmemmap pages associated with the
hugetlb page, and potentially another one if the vmemmap pages are mapped
at the PMD level and must be split. The TLB flushes required for the
kernel pagetable, result in a broadcast IPI with each CPU having to flush
a range of pages, or do a global flush if a threshold is exceeded. So,
the flush time increases with the number of CPUs. In addition, in virtual
environments the broadcast IPI can’t be accelerated by hypervisor
hardware and leads to traps that need to wakeup/IPI all vCPUs which is
very expensive. Because of this the slowdown in virtual environments is
even worse than bare metal as the number of vCPUS/CPUs is increased.
The following series attempts to reduce amount of time spent in TLB
flushing. The idea is to batch the vmemmap modification operations for
multiple hugetlb pages. Instead of doing one or two TLB flushes for each
page, we do two TLB flushes for each batch of pages. One flush after
splitting pages mapped at the PMD level, and another after remapping
vmemmap associated with all hugetlb pages. Results of such batching are
as follows:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.719s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.245s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m7.267s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m13.199s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.715s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m3.186s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m4.799s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m5.273s
With batching, results are back in the 2-3x slowdown range.
This patch (of 8):
update_and_free_pages_bulk is designed to free a list of hugetlb pages
back to their associated lower level allocators. This may require
allocating vmemmmap pages associated with each hugetlb page. The hugetlb
page destructor must be changed before pages are freed to lower level
allocators. However, the destructor must be changed under the hugetlb
lock. This means there is potentially one lock cycle per page.
Minimize the number of lock cycles in update_and_free_pages_bulk by:
1) allocating necessary vmemmap for all hugetlb pages on the list
2) take hugetlb lock and clear destructor for all pages on the list
3) free all pages on list back to low level allocators
Link: https://lkml.kernel.org/r/20231019023113.345257-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20231019023113.345257-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-19 02:31:03 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
|
|
|
add_hugetlb_folio(h, folio, true);
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2023-10-19 02:31:06 +00:00
|
|
|
} else {
|
|
|
|
list_del(&folio->lru);
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2024-03-21 14:24:47 +00:00
|
|
|
__folio_clear_hugetlb(folio);
|
2023-10-19 02:31:06 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
update_and_free_hugetlb_folio(h, folio, false);
|
|
|
|
cond_resched();
|
|
|
|
break;
|
|
|
|
}
|
hugetlb: optimize update_and_free_pages_bulk to avoid lock cycles
Patch series "Batch hugetlb vmemmap modification operations", v8.
When hugetlb vmemmap optimization was introduced, the overhead of enabling
the option was measured as described in commit 426e5c429d16 [1]. The
summary states that allocating a hugetlb page should be ~2x slower with
optimization and freeing a hugetlb page should be ~2-3x slower. Such
overhead was deemed an acceptable trade off for the memory savings
obtained by freeing vmemmap pages.
It was recently reported that the overhead associated with enabling
vmemmap optimization could be as high as 190x for hugetlb page
allocations. Yes, 190x! Some actual numbers from other environments are:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.119s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.477s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m28.973s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m36.748s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.463s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m2.931s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 2m27.609s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 2m29.924s
In the VM environment, the slowdown of enabling hugetlb vmemmap optimization
resulted in allocation times being 61x slower.
A quick profile showed that the vast majority of this overhead was due to
TLB flushing. Each time we modify the kernel pagetable we need to flush
the TLB. For each hugetlb that is optimized, there could be potentially
two TLB flushes performed. One for the vmemmap pages associated with the
hugetlb page, and potentially another one if the vmemmap pages are mapped
at the PMD level and must be split. The TLB flushes required for the
kernel pagetable, result in a broadcast IPI with each CPU having to flush
a range of pages, or do a global flush if a threshold is exceeded. So,
the flush time increases with the number of CPUs. In addition, in virtual
environments the broadcast IPI can’t be accelerated by hypervisor
hardware and leads to traps that need to wakeup/IPI all vCPUs which is
very expensive. Because of this the slowdown in virtual environments is
even worse than bare metal as the number of vCPUS/CPUs is increased.
The following series attempts to reduce amount of time spent in TLB
flushing. The idea is to batch the vmemmap modification operations for
multiple hugetlb pages. Instead of doing one or two TLB flushes for each
page, we do two TLB flushes for each batch of pages. One flush after
splitting pages mapped at the PMD level, and another after remapping
vmemmap associated with all hugetlb pages. Results of such batching are
as follows:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.719s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.245s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m7.267s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m13.199s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.715s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m3.186s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m4.799s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m5.273s
With batching, results are back in the 2-3x slowdown range.
This patch (of 8):
update_and_free_pages_bulk is designed to free a list of hugetlb pages
back to their associated lower level allocators. This may require
allocating vmemmmap pages associated with each hugetlb page. The hugetlb
page destructor must be changed before pages are freed to lower level
allocators. However, the destructor must be changed under the hugetlb
lock. This means there is potentially one lock cycle per page.
Minimize the number of lock cycles in update_and_free_pages_bulk by:
1) allocating necessary vmemmap for all hugetlb pages on the list
2) take hugetlb lock and clear destructor for all pages on the list
3) free all pages on list back to low level allocators
Link: https://lkml.kernel.org/r/20231019023113.345257-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20231019023113.345257-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-19 02:31:03 +00:00
|
|
|
}
|
2023-10-19 02:31:06 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void update_and_free_pages_bulk(struct hstate *h,
|
|
|
|
struct list_head *folio_list)
|
|
|
|
{
|
|
|
|
long ret;
|
|
|
|
struct folio *folio, *t_folio;
|
|
|
|
LIST_HEAD(non_hvo_folios);
|
hugetlb: optimize update_and_free_pages_bulk to avoid lock cycles
Patch series "Batch hugetlb vmemmap modification operations", v8.
When hugetlb vmemmap optimization was introduced, the overhead of enabling
the option was measured as described in commit 426e5c429d16 [1]. The
summary states that allocating a hugetlb page should be ~2x slower with
optimization and freeing a hugetlb page should be ~2-3x slower. Such
overhead was deemed an acceptable trade off for the memory savings
obtained by freeing vmemmap pages.
It was recently reported that the overhead associated with enabling
vmemmap optimization could be as high as 190x for hugetlb page
allocations. Yes, 190x! Some actual numbers from other environments are:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.119s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.477s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m28.973s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m36.748s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.463s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m2.931s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 2m27.609s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 2m29.924s
In the VM environment, the slowdown of enabling hugetlb vmemmap optimization
resulted in allocation times being 61x slower.
A quick profile showed that the vast majority of this overhead was due to
TLB flushing. Each time we modify the kernel pagetable we need to flush
the TLB. For each hugetlb that is optimized, there could be potentially
two TLB flushes performed. One for the vmemmap pages associated with the
hugetlb page, and potentially another one if the vmemmap pages are mapped
at the PMD level and must be split. The TLB flushes required for the
kernel pagetable, result in a broadcast IPI with each CPU having to flush
a range of pages, or do a global flush if a threshold is exceeded. So,
the flush time increases with the number of CPUs. In addition, in virtual
environments the broadcast IPI can’t be accelerated by hypervisor
hardware and leads to traps that need to wakeup/IPI all vCPUs which is
very expensive. Because of this the slowdown in virtual environments is
even worse than bare metal as the number of vCPUS/CPUs is increased.
The following series attempts to reduce amount of time spent in TLB
flushing. The idea is to batch the vmemmap modification operations for
multiple hugetlb pages. Instead of doing one or two TLB flushes for each
page, we do two TLB flushes for each batch of pages. One flush after
splitting pages mapped at the PMD level, and another after remapping
vmemmap associated with all hugetlb pages. Results of such batching are
as follows:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.719s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.245s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m7.267s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m13.199s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.715s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m3.186s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m4.799s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m5.273s
With batching, results are back in the 2-3x slowdown range.
This patch (of 8):
update_and_free_pages_bulk is designed to free a list of hugetlb pages
back to their associated lower level allocators. This may require
allocating vmemmmap pages associated with each hugetlb page. The hugetlb
page destructor must be changed before pages are freed to lower level
allocators. However, the destructor must be changed under the hugetlb
lock. This means there is potentially one lock cycle per page.
Minimize the number of lock cycles in update_and_free_pages_bulk by:
1) allocating necessary vmemmap for all hugetlb pages on the list
2) take hugetlb lock and clear destructor for all pages on the list
3) free all pages on list back to low level allocators
Link: https://lkml.kernel.org/r/20231019023113.345257-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20231019023113.345257-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-19 02:31:03 +00:00
|
|
|
|
|
|
|
/*
|
2023-10-19 02:31:06 +00:00
|
|
|
* First allocate required vmemmmap (if necessary) for all folios.
|
|
|
|
* Carefully handle errors and free up any available hugetlb pages
|
|
|
|
* in an effort to make forward progress.
|
hugetlb: optimize update_and_free_pages_bulk to avoid lock cycles
Patch series "Batch hugetlb vmemmap modification operations", v8.
When hugetlb vmemmap optimization was introduced, the overhead of enabling
the option was measured as described in commit 426e5c429d16 [1]. The
summary states that allocating a hugetlb page should be ~2x slower with
optimization and freeing a hugetlb page should be ~2-3x slower. Such
overhead was deemed an acceptable trade off for the memory savings
obtained by freeing vmemmap pages.
It was recently reported that the overhead associated with enabling
vmemmap optimization could be as high as 190x for hugetlb page
allocations. Yes, 190x! Some actual numbers from other environments are:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.119s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.477s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m28.973s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m36.748s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.463s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m2.931s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 2m27.609s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 2m29.924s
In the VM environment, the slowdown of enabling hugetlb vmemmap optimization
resulted in allocation times being 61x slower.
A quick profile showed that the vast majority of this overhead was due to
TLB flushing. Each time we modify the kernel pagetable we need to flush
the TLB. For each hugetlb that is optimized, there could be potentially
two TLB flushes performed. One for the vmemmap pages associated with the
hugetlb page, and potentially another one if the vmemmap pages are mapped
at the PMD level and must be split. The TLB flushes required for the
kernel pagetable, result in a broadcast IPI with each CPU having to flush
a range of pages, or do a global flush if a threshold is exceeded. So,
the flush time increases with the number of CPUs. In addition, in virtual
environments the broadcast IPI can’t be accelerated by hypervisor
hardware and leads to traps that need to wakeup/IPI all vCPUs which is
very expensive. Because of this the slowdown in virtual environments is
even worse than bare metal as the number of vCPUS/CPUs is increased.
The following series attempts to reduce amount of time spent in TLB
flushing. The idea is to batch the vmemmap modification operations for
multiple hugetlb pages. Instead of doing one or two TLB flushes for each
page, we do two TLB flushes for each batch of pages. One flush after
splitting pages mapped at the PMD level, and another after remapping
vmemmap associated with all hugetlb pages. Results of such batching are
as follows:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.719s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.245s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m7.267s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m13.199s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.715s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m3.186s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m4.799s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m5.273s
With batching, results are back in the 2-3x slowdown range.
This patch (of 8):
update_and_free_pages_bulk is designed to free a list of hugetlb pages
back to their associated lower level allocators. This may require
allocating vmemmmap pages associated with each hugetlb page. The hugetlb
page destructor must be changed before pages are freed to lower level
allocators. However, the destructor must be changed under the hugetlb
lock. This means there is potentially one lock cycle per page.
Minimize the number of lock cycles in update_and_free_pages_bulk by:
1) allocating necessary vmemmap for all hugetlb pages on the list
2) take hugetlb lock and clear destructor for all pages on the list
3) free all pages on list back to low level allocators
Link: https://lkml.kernel.org/r/20231019023113.345257-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20231019023113.345257-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-19 02:31:03 +00:00
|
|
|
*/
|
2023-10-19 02:31:06 +00:00
|
|
|
retry:
|
|
|
|
ret = hugetlb_vmemmap_restore_folios(h, folio_list, &non_hvo_folios);
|
|
|
|
if (ret < 0) {
|
|
|
|
bulk_vmemmap_restore_error(h, folio_list, &non_hvo_folios);
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* At this point, list should be empty, ret should be >= 0 and there
|
|
|
|
* should only be pages on the non_hvo_folios list.
|
|
|
|
* Do note that the non_hvo_folios list could be empty.
|
|
|
|
* Without HVO enabled, ret will be 0 and there is no need to call
|
2024-03-21 14:24:47 +00:00
|
|
|
* __folio_clear_hugetlb as this was done previously.
|
2023-10-19 02:31:06 +00:00
|
|
|
*/
|
|
|
|
VM_WARN_ON(!list_empty(folio_list));
|
|
|
|
VM_WARN_ON(ret < 0);
|
|
|
|
if (!list_empty(&non_hvo_folios) && ret) {
|
hugetlb: optimize update_and_free_pages_bulk to avoid lock cycles
Patch series "Batch hugetlb vmemmap modification operations", v8.
When hugetlb vmemmap optimization was introduced, the overhead of enabling
the option was measured as described in commit 426e5c429d16 [1]. The
summary states that allocating a hugetlb page should be ~2x slower with
optimization and freeing a hugetlb page should be ~2-3x slower. Such
overhead was deemed an acceptable trade off for the memory savings
obtained by freeing vmemmap pages.
It was recently reported that the overhead associated with enabling
vmemmap optimization could be as high as 190x for hugetlb page
allocations. Yes, 190x! Some actual numbers from other environments are:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.119s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.477s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m28.973s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m36.748s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.463s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m2.931s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 2m27.609s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 2m29.924s
In the VM environment, the slowdown of enabling hugetlb vmemmap optimization
resulted in allocation times being 61x slower.
A quick profile showed that the vast majority of this overhead was due to
TLB flushing. Each time we modify the kernel pagetable we need to flush
the TLB. For each hugetlb that is optimized, there could be potentially
two TLB flushes performed. One for the vmemmap pages associated with the
hugetlb page, and potentially another one if the vmemmap pages are mapped
at the PMD level and must be split. The TLB flushes required for the
kernel pagetable, result in a broadcast IPI with each CPU having to flush
a range of pages, or do a global flush if a threshold is exceeded. So,
the flush time increases with the number of CPUs. In addition, in virtual
environments the broadcast IPI can’t be accelerated by hypervisor
hardware and leads to traps that need to wakeup/IPI all vCPUs which is
very expensive. Because of this the slowdown in virtual environments is
even worse than bare metal as the number of vCPUS/CPUs is increased.
The following series attempts to reduce amount of time spent in TLB
flushing. The idea is to batch the vmemmap modification operations for
multiple hugetlb pages. Instead of doing one or two TLB flushes for each
page, we do two TLB flushes for each batch of pages. One flush after
splitting pages mapped at the PMD level, and another after remapping
vmemmap associated with all hugetlb pages. Results of such batching are
as follows:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.719s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.245s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m7.267s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m13.199s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.715s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m3.186s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m4.799s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m5.273s
With batching, results are back in the 2-3x slowdown range.
This patch (of 8):
update_and_free_pages_bulk is designed to free a list of hugetlb pages
back to their associated lower level allocators. This may require
allocating vmemmmap pages associated with each hugetlb page. The hugetlb
page destructor must be changed before pages are freed to lower level
allocators. However, the destructor must be changed under the hugetlb
lock. This means there is potentially one lock cycle per page.
Minimize the number of lock cycles in update_and_free_pages_bulk by:
1) allocating necessary vmemmap for all hugetlb pages on the list
2) take hugetlb lock and clear destructor for all pages on the list
3) free all pages on list back to low level allocators
Link: https://lkml.kernel.org/r/20231019023113.345257-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20231019023113.345257-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-19 02:31:03 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2023-10-19 02:31:06 +00:00
|
|
|
list_for_each_entry(folio, &non_hvo_folios, lru)
|
2024-03-21 14:24:47 +00:00
|
|
|
__folio_clear_hugetlb(folio);
|
hugetlb: optimize update_and_free_pages_bulk to avoid lock cycles
Patch series "Batch hugetlb vmemmap modification operations", v8.
When hugetlb vmemmap optimization was introduced, the overhead of enabling
the option was measured as described in commit 426e5c429d16 [1]. The
summary states that allocating a hugetlb page should be ~2x slower with
optimization and freeing a hugetlb page should be ~2-3x slower. Such
overhead was deemed an acceptable trade off for the memory savings
obtained by freeing vmemmap pages.
It was recently reported that the overhead associated with enabling
vmemmap optimization could be as high as 190x for hugetlb page
allocations. Yes, 190x! Some actual numbers from other environments are:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.119s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.477s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m28.973s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m36.748s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.463s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m2.931s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 2m27.609s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 2m29.924s
In the VM environment, the slowdown of enabling hugetlb vmemmap optimization
resulted in allocation times being 61x slower.
A quick profile showed that the vast majority of this overhead was due to
TLB flushing. Each time we modify the kernel pagetable we need to flush
the TLB. For each hugetlb that is optimized, there could be potentially
two TLB flushes performed. One for the vmemmap pages associated with the
hugetlb page, and potentially another one if the vmemmap pages are mapped
at the PMD level and must be split. The TLB flushes required for the
kernel pagetable, result in a broadcast IPI with each CPU having to flush
a range of pages, or do a global flush if a threshold is exceeded. So,
the flush time increases with the number of CPUs. In addition, in virtual
environments the broadcast IPI can’t be accelerated by hypervisor
hardware and leads to traps that need to wakeup/IPI all vCPUs which is
very expensive. Because of this the slowdown in virtual environments is
even worse than bare metal as the number of vCPUS/CPUs is increased.
The following series attempts to reduce amount of time spent in TLB
flushing. The idea is to batch the vmemmap modification operations for
multiple hugetlb pages. Instead of doing one or two TLB flushes for each
page, we do two TLB flushes for each batch of pages. One flush after
splitting pages mapped at the PMD level, and another after remapping
vmemmap associated with all hugetlb pages. Results of such batching are
as follows:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.719s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.245s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m7.267s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m13.199s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.715s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m3.186s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m4.799s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m5.273s
With batching, results are back in the 2-3x slowdown range.
This patch (of 8):
update_and_free_pages_bulk is designed to free a list of hugetlb pages
back to their associated lower level allocators. This may require
allocating vmemmmap pages associated with each hugetlb page. The hugetlb
page destructor must be changed before pages are freed to lower level
allocators. However, the destructor must be changed under the hugetlb
lock. This means there is potentially one lock cycle per page.
Minimize the number of lock cycles in update_and_free_pages_bulk by:
1) allocating necessary vmemmap for all hugetlb pages on the list
2) take hugetlb lock and clear destructor for all pages on the list
3) free all pages on list back to low level allocators
Link: https://lkml.kernel.org/r/20231019023113.345257-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20231019023113.345257-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-19 02:31:03 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:06 +00:00
|
|
|
list_for_each_entry_safe(folio, t_folio, &non_hvo_folios, lru) {
|
2022-11-29 22:50:34 +00:00
|
|
|
update_and_free_hugetlb_folio(h, folio, false);
|
2021-05-05 01:35:03 +00:00
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:42 +00:00
|
|
|
struct hstate *size_to_hstate(unsigned long size)
|
|
|
|
{
|
|
|
|
struct hstate *h;
|
|
|
|
|
|
|
|
for_each_hstate(h) {
|
|
|
|
if (huge_page_size(h) == size)
|
|
|
|
return h;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2023-08-16 15:11:51 +00:00
|
|
|
void free_huge_folio(struct folio *folio)
|
2006-03-22 08:08:56 +00:00
|
|
|
{
|
2008-07-24 04:27:41 +00:00
|
|
|
/*
|
|
|
|
* Can't pass hstate in here because it is called from the
|
2024-03-21 14:24:47 +00:00
|
|
|
* generic mm code.
|
2008-07-24 04:27:41 +00:00
|
|
|
*/
|
2022-11-01 22:30:56 +00:00
|
|
|
struct hstate *h = folio_hstate(folio);
|
|
|
|
int nid = folio_nid(folio);
|
|
|
|
struct hugepage_subpool *spool = hugetlb_folio_subpool(folio);
|
2013-09-11 21:21:58 +00:00
|
|
|
bool restore_reserve;
|
2021-05-05 01:35:07 +00:00
|
|
|
unsigned long flags;
|
2006-03-22 08:08:56 +00:00
|
|
|
|
2022-11-01 22:30:56 +00:00
|
|
|
VM_BUG_ON_FOLIO(folio_ref_count(folio), folio);
|
|
|
|
VM_BUG_ON_FOLIO(folio_mapcount(folio), folio);
|
2018-12-14 22:17:10 +00:00
|
|
|
|
2022-11-01 22:30:56 +00:00
|
|
|
hugetlb_set_folio_subpool(folio, NULL);
|
|
|
|
if (folio_test_anon(folio))
|
|
|
|
__ClearPageAnonExclusive(&folio->page);
|
|
|
|
folio->mapping = NULL;
|
|
|
|
restore_reserve = folio_test_hugetlb_restore_reserve(folio);
|
|
|
|
folio_clear_hugetlb_restore_reserve(folio);
|
2006-03-22 08:08:56 +00:00
|
|
|
|
2015-04-15 23:13:39 +00:00
|
|
|
/*
|
hugetlb: use page.private for hugetlb specific page flags
Patch series "create hugetlb flags to consolidate state", v3.
While discussing a series of hugetlb fixes in [1], it became evident that
the hugetlb specific page state information is stored in a somewhat
haphazard manner. Code dealing with state information would be easier to
read, understand and maintain if this information was stored in a
consistent manner.
This series uses page.private of the hugetlb head page for storing a set
of hugetlb specific page flags. Routines are priovided for test, set and
clear of the flags.
[1] https://lore.kernel.org/r/20210106084739.63318-1-songmuchun@bytedance.com
This patch (of 4):
As hugetlbfs evolved, state information about hugetlb pages was added.
One 'convenient' way of doing this was to use available fields in tail
pages. Over time, it has become difficult to know the meaning or contents
of fields simply by looking at a small bit of code. Sometimes, the naming
is just confusing. For example: The PagePrivate flag indicates a huge
page reservation was consumed and needs to be restored if an error is
encountered and the page is freed before it is instantiated. The
page.private field contains the pointer to a subpool if the page is
associated with one.
In an effort to make the code more readable, use page.private to contain
hugetlb specific page flags. These flags will have test, set and clear
functions similar to those used for 'normal' page flags. More
importantly, an enum of flag values will be created with names that
actually reflect their purpose.
In this patch,
- Create infrastructure for hugetlb specific page flag functions
- Move subpool pointer to page[1].private to make way for flags
Create routines with meaningful names to modify subpool field
- Use new HPageRestoreReserve flag instead of PagePrivate
Conversion of other state information will happen in subsequent patches.
Link: https://lkml.kernel.org/r/20210122195231.324857-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20210122195231.324857-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 20:08:51 +00:00
|
|
|
* If HPageRestoreReserve was set on page, page allocation consumed a
|
2019-05-14 00:19:38 +00:00
|
|
|
* reservation. If the page was associated with a subpool, there
|
|
|
|
* would have been a page reserved in the subpool before allocation
|
|
|
|
* via hugepage_subpool_get_pages(). Since we are 'restoring' the
|
2021-02-24 20:07:19 +00:00
|
|
|
* reservation, do not call hugepage_subpool_put_pages() as this will
|
2019-05-14 00:19:38 +00:00
|
|
|
* remove the reserved page from the subpool.
|
2015-04-15 23:13:39 +00:00
|
|
|
*/
|
2019-05-14 00:19:38 +00:00
|
|
|
if (!restore_reserve) {
|
|
|
|
/*
|
|
|
|
* A return code of zero implies that the subpool will be
|
|
|
|
* under its minimum size if the reservation is not restored
|
|
|
|
* after page is free. Therefore, force restore_reserve
|
|
|
|
* operation.
|
|
|
|
*/
|
|
|
|
if (hugepage_subpool_put_pages(spool, 1) == 0)
|
|
|
|
restore_reserve = true;
|
|
|
|
}
|
2015-04-15 23:13:39 +00:00
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irqsave(&hugetlb_lock, flags);
|
2022-11-01 22:30:56 +00:00
|
|
|
folio_clear_hugetlb_migratable(folio);
|
2022-11-01 22:30:57 +00:00
|
|
|
hugetlb_cgroup_uncharge_folio(hstate_index(h),
|
|
|
|
pages_per_huge_page(h), folio);
|
|
|
|
hugetlb_cgroup_uncharge_folio_rsvd(hstate_index(h),
|
|
|
|
pages_per_huge_page(h), folio);
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
mem_cgroup_uncharge(folio);
|
2013-09-11 21:21:58 +00:00
|
|
|
if (restore_reserve)
|
|
|
|
h->resv_huge_pages++;
|
|
|
|
|
2022-11-01 22:30:56 +00:00
|
|
|
if (folio_test_hugetlb_temporary(folio)) {
|
2022-11-29 22:50:33 +00:00
|
|
|
remove_hugetlb_folio(h, folio, false);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irqrestore(&hugetlb_lock, flags);
|
2022-11-29 22:50:34 +00:00
|
|
|
update_and_free_hugetlb_folio(h, folio, true);
|
2018-02-01 00:20:48 +00:00
|
|
|
} else if (h->surplus_huge_pages_node[nid]) {
|
2012-07-31 23:42:07 +00:00
|
|
|
/* remove the page from active list */
|
2022-11-29 22:50:33 +00:00
|
|
|
remove_hugetlb_folio(h, folio, true);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irqrestore(&hugetlb_lock, flags);
|
2022-11-29 22:50:34 +00:00
|
|
|
update_and_free_hugetlb_folio(h, folio, true);
|
2007-10-16 08:26:18 +00:00
|
|
|
} else {
|
2024-03-26 17:10:29 +00:00
|
|
|
arch_clear_hugetlb_flags(folio);
|
2022-11-29 22:50:36 +00:00
|
|
|
enqueue_hugetlb_folio(h, folio);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irqrestore(&hugetlb_lock, flags);
|
2020-01-04 21:00:15 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2021-05-05 01:35:23 +00:00
|
|
|
/*
|
|
|
|
* Must be called with the hugetlb lock held
|
|
|
|
*/
|
|
|
|
static void __prep_account_new_huge_page(struct hstate *h, int nid)
|
|
|
|
{
|
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
|
|
|
h->nr_huge_pages++;
|
|
|
|
h->nr_huge_pages_node[nid]++;
|
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:04 +00:00
|
|
|
static void init_new_hugetlb_folio(struct hstate *h, struct folio *folio)
|
2008-07-24 04:27:40 +00:00
|
|
|
{
|
2024-03-21 14:24:43 +00:00
|
|
|
__folio_set_hugetlb(folio);
|
2022-11-01 22:30:53 +00:00
|
|
|
INIT_LIST_HEAD(&folio->lru);
|
|
|
|
hugetlb_set_folio_subpool(folio, NULL);
|
|
|
|
set_hugetlb_cgroup(folio, NULL);
|
|
|
|
set_hugetlb_cgroup_rsvd(folio, NULL);
|
2021-05-05 01:35:23 +00:00
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:04 +00:00
|
|
|
static void __prep_new_hugetlb_folio(struct hstate *h, struct folio *folio)
|
|
|
|
{
|
|
|
|
init_new_hugetlb_folio(h, folio);
|
2023-10-11 14:45:57 +00:00
|
|
|
hugetlb_vmemmap_optimize_folio(h, folio);
|
2023-10-19 02:31:04 +00:00
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:38 +00:00
|
|
|
static void prep_new_hugetlb_folio(struct hstate *h, struct folio *folio, int nid)
|
2021-05-05 01:35:23 +00:00
|
|
|
{
|
2022-11-01 22:30:53 +00:00
|
|
|
__prep_new_hugetlb_folio(h, folio);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2021-05-05 01:35:23 +00:00
|
|
|
__prep_account_new_huge_page(h, nid);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2008-07-24 04:27:40 +00:00
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:38 +00:00
|
|
|
static bool __prep_compound_gigantic_folio(struct folio *folio,
|
|
|
|
unsigned int order, bool demote)
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
{
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
int i, j;
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
int nr_pages = 1 << order;
|
2022-09-09 07:31:09 +00:00
|
|
|
struct page *p;
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
|
2022-11-29 22:50:38 +00:00
|
|
|
__folio_clear_reserved(folio);
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
for (i = 0; i < nr_pages; i++) {
|
2022-11-29 22:50:38 +00:00
|
|
|
p = folio_page(folio, i);
|
2022-09-09 07:31:09 +00:00
|
|
|
|
2013-10-16 20:46:56 +00:00
|
|
|
/*
|
|
|
|
* For gigantic hugepages allocated through bootmem at
|
|
|
|
* boot, it's safer to be consistent with the not-gigantic
|
|
|
|
* hugepages and clear the PG_reserved bit from all tail pages
|
2020-06-04 23:49:07 +00:00
|
|
|
* too. Otherwise drivers using get_user_pages() to access tail
|
2013-10-16 20:46:56 +00:00
|
|
|
* pages may get the reference counting wrong if they see
|
|
|
|
* PG_reserved set on a tail page (despite the head page not
|
|
|
|
* having PG_reserved set). Enforcing this consistency between
|
|
|
|
* head and tail pages allows drivers to optimize away a check
|
|
|
|
* on the head page when they need know if put_page() is needed
|
|
|
|
* after get_user_pages().
|
|
|
|
*/
|
2022-11-18 19:52:49 +00:00
|
|
|
if (i != 0) /* head page cleared above */
|
|
|
|
__ClearPageReserved(p);
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
/*
|
|
|
|
* Subtle and very unlikely
|
|
|
|
*
|
|
|
|
* Gigantic 'page allocators' such as memblock or cma will
|
|
|
|
* return a set of pages with each page ref counted. We need
|
|
|
|
* to turn this set of pages into a compound page with tail
|
|
|
|
* page ref counts set to zero. Code such as speculative page
|
|
|
|
* cache adding could take a ref on a 'to be' tail page.
|
|
|
|
* We need to respect any increased ref count, and only set
|
|
|
|
* the ref count to zero if count is currently 1. If count
|
2021-09-02 21:58:43 +00:00
|
|
|
* is not 1, we return an error. An error return indicates
|
|
|
|
* the set of pages can not be converted to a gigantic page.
|
|
|
|
* The caller who allocated the pages should then discard the
|
|
|
|
* pages using the appropriate free interface.
|
2021-11-05 20:41:30 +00:00
|
|
|
*
|
|
|
|
* In the case of demote, the ref count will be zero.
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
*/
|
2021-11-05 20:41:30 +00:00
|
|
|
if (!demote) {
|
|
|
|
if (!page_ref_freeze(p, 1)) {
|
|
|
|
pr_warn("HugeTLB page can not be used due to unexpected inflated ref count\n");
|
|
|
|
goto out_error;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
VM_BUG_ON_PAGE(page_count(p), p);
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
}
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
if (i != 0)
|
2022-11-29 22:50:38 +00:00
|
|
|
set_compound_head(p, &folio->page);
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
}
|
mm/folio: avoid special handling for order value 0 in folio_set_order
folio_set_order(folio, 0) is used in kernel at two places
__destroy_compound_gigantic_folio and __prep_compound_gigantic_folio.
Currently, It is called to clear out the folio->_folio_nr_pages and
folio->_folio_order.
For __destroy_compound_gigantic_folio:
In past, folio_set_order(folio, 0) was needed because page->mapping used
to overlap with _folio_nr_pages and _folio_order. So if these fields were
left uncleared during freeing gigantic hugepages, they were causing
"BUG: bad page state" due to non-zero page->mapping. Now, After
Commit a01f43901cfb ("hugetlb: be sure to free demoted CMA pages to
CMA") page->mapping has explicitly been cleared out for tail pages. Also,
_folio_order and _folio_nr_pages no longer overlaps with page->mapping.
So, folio_set_order(folio, 0) can be removed from freeing gigantic
folio path (__destroy_compound_gigantic_folio).
Another place, folio_set_order(folio, 0) is called inside
__prep_compound_gigantic_folio during error path. Here,
folio_set_order(folio, 0) can also be removed if we move
folio_set_order(folio, order) after for loop.
The patch also moves _folio_set_head call in __prep_compound_gigantic_folio()
such that we avoid clearing them in the error path.
Also, as Mike pointed out:
"It would actually be better to move the calls _folio_set_head and
folio_set_order in __prep_compound_gigantic_folio() as suggested here. Why?
In the current code, the ref count on the 'head page' is still 1 (or more)
while those calls are made. So, someone could take a speculative ref on the
page BEFORE the tail pages are set up."
This way, folio_set_order(folio, 0) is no more needed. And it will also
helps removing the confusion of folio order being set to 0 (as _folio_order
field is part of first tail page).
Testing: I have run LTP tests, which all passes. and also I have written
the test in LTP which tests the bug caused by compound_nr and page->mapping
overlapping.
https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/hugetlb/hugemmap/hugemmap32.c
Running on older kernel ( < 5.10-rc7) with the above bug this fails while
on newer kernel and, also with this patch it passes.
Link: https://lkml.kernel.org/r/20230609162907.111756-1-tsahu@linux.ibm.com
Signed-off-by: Tarun Sahu <tsahu@linux.ibm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:29:07 +00:00
|
|
|
__folio_set_head(folio);
|
2024-03-21 14:24:47 +00:00
|
|
|
/* we rely on prep_new_hugetlb_folio to set the hugetlb flag */
|
mm/folio: avoid special handling for order value 0 in folio_set_order
folio_set_order(folio, 0) is used in kernel at two places
__destroy_compound_gigantic_folio and __prep_compound_gigantic_folio.
Currently, It is called to clear out the folio->_folio_nr_pages and
folio->_folio_order.
For __destroy_compound_gigantic_folio:
In past, folio_set_order(folio, 0) was needed because page->mapping used
to overlap with _folio_nr_pages and _folio_order. So if these fields were
left uncleared during freeing gigantic hugepages, they were causing
"BUG: bad page state" due to non-zero page->mapping. Now, After
Commit a01f43901cfb ("hugetlb: be sure to free demoted CMA pages to
CMA") page->mapping has explicitly been cleared out for tail pages. Also,
_folio_order and _folio_nr_pages no longer overlaps with page->mapping.
So, folio_set_order(folio, 0) can be removed from freeing gigantic
folio path (__destroy_compound_gigantic_folio).
Another place, folio_set_order(folio, 0) is called inside
__prep_compound_gigantic_folio during error path. Here,
folio_set_order(folio, 0) can also be removed if we move
folio_set_order(folio, order) after for loop.
The patch also moves _folio_set_head call in __prep_compound_gigantic_folio()
such that we avoid clearing them in the error path.
Also, as Mike pointed out:
"It would actually be better to move the calls _folio_set_head and
folio_set_order in __prep_compound_gigantic_folio() as suggested here. Why?
In the current code, the ref count on the 'head page' is still 1 (or more)
while those calls are made. So, someone could take a speculative ref on the
page BEFORE the tail pages are set up."
This way, folio_set_order(folio, 0) is no more needed. And it will also
helps removing the confusion of folio order being set to 0 (as _folio_order
field is part of first tail page).
Testing: I have run LTP tests, which all passes. and also I have written
the test in LTP which tests the bug caused by compound_nr and page->mapping
overlapping.
https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/hugetlb/hugemmap/hugemmap32.c
Running on older kernel ( < 5.10-rc7) with the above bug this fails while
on newer kernel and, also with this patch it passes.
Link: https://lkml.kernel.org/r/20230609162907.111756-1-tsahu@linux.ibm.com
Signed-off-by: Tarun Sahu <tsahu@linux.ibm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:29:07 +00:00
|
|
|
folio_set_order(folio, order);
|
2023-01-11 14:28:59 +00:00
|
|
|
atomic_set(&folio->_entire_mapcount, -1);
|
mm: track mapcount of large folios in single value
Let's track the mapcount of large folios in a single value. The mapcount
of a large folio currently corresponds to the sum of the entire mapcount
and all page mapcounts.
This sum is what we actually want to know in folio_mapcount() and it is
also sufficient for implementing folio_mapped().
With PTE-mapped THP becoming more important and more widely used, we want
to avoid looping over all pages of a folio just to obtain the mapcount of
large folios. The comment "In the common case, avoid the loop when no
pages mapped by PTE" in folio_total_mapcount() does no longer hold for
mTHP that are always mapped by PTE.
Further, we are planning on using folio_mapcount() more frequently, and
might even want to remove page mapcounts for large folios in some kernel
configs. Therefore, allow for reading the mapcount of large folios
efficiently and atomically without looping over any pages.
Maintain the mapcount also for hugetlb pages for simplicity. Use the new
mapcount to implement folio_mapcount() and folio_mapped(). Make
page_mapped() simply call folio_mapped(). We can now get rid of
folio_large_is_mapped().
_nr_pages_mapped is now only used in rmap code and for debugging purposes.
Keep folio_nr_pages_mapped() around, but document that its use should be
limited to rmap internals and debugging purposes.
This change implies one additional atomic add/sub whenever
mapping/unmapping (parts of) a large folio.
As we now batch RMAP operations for PTE-mapped THP during fork(), during
unmap/zap, and when PTE-remapping a PMD-mapped THP, and we adjust the
large mapcount for a PTE batch only once, the added overhead in the common
case is small. Only when unmapping individual pages of a large folio
(e.g., during COW), the overhead might be bigger in comparison, but it's
essentially one additional atomic operation.
Note that before the new mapcount would overflow, already our refcount
would overflow: each mapping requires a folio reference. Extend the
focumentation of folio_mapcount().
Link: https://lkml.kernel.org/r/20240409192301.907377-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Richard Chang <richardycc@google.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-09 19:22:47 +00:00
|
|
|
atomic_set(&folio->_large_mapcount, -1);
|
2023-01-11 14:28:47 +00:00
|
|
|
atomic_set(&folio->_pincount, 0);
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
return true;
|
|
|
|
|
|
|
|
out_error:
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
/* undo page modifications made above */
|
|
|
|
for (j = 0; j < i; j++) {
|
2022-11-29 22:50:38 +00:00
|
|
|
p = folio_page(folio, j);
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
if (j != 0)
|
|
|
|
clear_compound_head(p);
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
set_page_refcounted(p);
|
|
|
|
}
|
|
|
|
/* need to clear PG_reserved on remaining tail pages */
|
2022-09-09 07:31:09 +00:00
|
|
|
for (; j < nr_pages; j++) {
|
2022-11-29 22:50:38 +00:00
|
|
|
p = folio_page(folio, j);
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
__ClearPageReserved(p);
|
2022-09-09 07:31:09 +00:00
|
|
|
}
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
return false;
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:38 +00:00
|
|
|
static bool prep_compound_gigantic_folio(struct folio *folio,
|
|
|
|
unsigned int order)
|
2021-11-05 20:41:30 +00:00
|
|
|
{
|
2022-11-29 22:50:38 +00:00
|
|
|
return __prep_compound_gigantic_folio(folio, order, false);
|
2021-11-05 20:41:30 +00:00
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:38 +00:00
|
|
|
static bool prep_compound_gigantic_folio_for_demote(struct folio *folio,
|
2021-11-05 20:41:33 +00:00
|
|
|
unsigned int order)
|
|
|
|
{
|
2022-11-29 22:50:38 +00:00
|
|
|
return __prep_compound_gigantic_folio(folio, order, true);
|
2021-11-05 20:41:33 +00:00
|
|
|
}
|
|
|
|
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:05 +00:00
|
|
|
/*
|
|
|
|
* Find and lock address space (mapping) in write mode.
|
|
|
|
*
|
2024-04-12 19:35:03 +00:00
|
|
|
* Upon entry, the folio is locked which means that folio_mapping() is
|
2020-11-14 06:52:16 +00:00
|
|
|
* stable. Due to locking order, we can only trylock_write. If we can
|
|
|
|
* not get the lock, simply return NULL to caller.
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:05 +00:00
|
|
|
*/
|
2024-04-12 19:35:03 +00:00
|
|
|
struct address_space *hugetlb_folio_mapping_lock_write(struct folio *folio)
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:05 +00:00
|
|
|
{
|
2024-04-12 19:35:03 +00:00
|
|
|
struct address_space *mapping = folio_mapping(folio);
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:05 +00:00
|
|
|
|
|
|
|
if (!mapping)
|
|
|
|
return mapping;
|
|
|
|
|
|
|
|
if (i_mmap_trylock_write(mapping))
|
|
|
|
return mapping;
|
|
|
|
|
2020-11-14 06:52:16 +00:00
|
|
|
return NULL;
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:05 +00:00
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:39 +00:00
|
|
|
static struct folio *alloc_buddy_hugetlb_folio(struct hstate *h,
|
2019-09-23 22:37:35 +00:00
|
|
|
gfp_t gfp_mask, int nid, nodemask_t *nmask,
|
|
|
|
nodemask_t *node_alloc_noretry)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2018-02-01 00:20:41 +00:00
|
|
|
int order = huge_page_order(h);
|
2024-04-02 20:06:54 +00:00
|
|
|
struct folio *folio;
|
2019-09-23 22:37:35 +00:00
|
|
|
bool alloc_try_hard = true;
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
bool retry = true;
|
2007-07-16 06:38:12 +00:00
|
|
|
|
2019-09-23 22:37:35 +00:00
|
|
|
/*
|
2024-04-02 20:06:54 +00:00
|
|
|
* By default we always try hard to allocate the folio with
|
|
|
|
* __GFP_RETRY_MAYFAIL flag. However, if we are allocating folios in
|
2019-09-23 22:37:35 +00:00
|
|
|
* a loop (to adjust global huge page counts) and previous allocation
|
|
|
|
* failed, do not continue to try hard on the same node. Use the
|
|
|
|
* node_alloc_noretry bitmap to manage this state information.
|
|
|
|
*/
|
|
|
|
if (node_alloc_noretry && node_isset(nid, *node_alloc_noretry))
|
|
|
|
alloc_try_hard = false;
|
|
|
|
gfp_mask |= __GFP_COMP|__GFP_NOWARN;
|
|
|
|
if (alloc_try_hard)
|
|
|
|
gfp_mask |= __GFP_RETRY_MAYFAIL;
|
2018-02-01 00:20:41 +00:00
|
|
|
if (nid == NUMA_NO_NODE)
|
|
|
|
nid = numa_mem_id();
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
retry:
|
2024-04-02 20:06:54 +00:00
|
|
|
folio = __folio_alloc(gfp_mask, order, nid, nmask);
|
2024-07-09 12:04:33 +00:00
|
|
|
/* Ensure hugetlb folio won't have large_rmappable flag set. */
|
|
|
|
if (folio)
|
|
|
|
folio_clear_large_rmappable(folio);
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
|
2024-04-02 20:06:54 +00:00
|
|
|
if (folio && !folio_ref_freeze(folio, 1)) {
|
|
|
|
folio_put(folio);
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
if (retry) { /* retry once */
|
|
|
|
retry = false;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
/* WOW! twice in a row. */
|
2024-04-02 20:06:54 +00:00
|
|
|
pr_warn("HugeTLB unexpected inflated folio ref count\n");
|
|
|
|
folio = NULL;
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
}
|
|
|
|
|
2019-09-23 22:37:35 +00:00
|
|
|
/*
|
2024-04-02 20:06:54 +00:00
|
|
|
* If we did not specify __GFP_RETRY_MAYFAIL, but still got a
|
|
|
|
* folio this indicates an overall state change. Clear bit so
|
|
|
|
* that we resume normal 'try hard' allocations.
|
2019-09-23 22:37:35 +00:00
|
|
|
*/
|
2024-04-02 20:06:54 +00:00
|
|
|
if (node_alloc_noretry && folio && !alloc_try_hard)
|
2019-09-23 22:37:35 +00:00
|
|
|
node_clear(nid, *node_alloc_noretry);
|
|
|
|
|
|
|
|
/*
|
2024-04-02 20:06:54 +00:00
|
|
|
* If we tried hard to get a folio but failed, set bit so that
|
2019-09-23 22:37:35 +00:00
|
|
|
* subsequent attempts will not try as hard until there is an
|
|
|
|
* overall state change.
|
|
|
|
*/
|
2024-04-02 20:06:54 +00:00
|
|
|
if (node_alloc_noretry && !folio && alloc_try_hard)
|
2019-09-23 22:37:35 +00:00
|
|
|
node_set(nid, *node_alloc_noretry);
|
|
|
|
|
2024-04-02 20:06:54 +00:00
|
|
|
if (!folio) {
|
2022-11-29 22:50:39 +00:00
|
|
|
__count_vm_event(HTLB_BUDDY_PGALLOC_FAIL);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
__count_vm_event(HTLB_BUDDY_PGALLOC);
|
2024-04-02 20:06:54 +00:00
|
|
|
return folio;
|
hugetlb: fix hugepage allocation with memoryless nodes
Anton found a problem with the hugetlb pool allocation when some nodes have
no memory (http://marc.info/?l=linux-mm&m=118133042025995&w=2). Lee worked
on versions that tried to fix it, but none were accepted. Christoph has
created a set of patches which allow for GFP_THISNODE allocations to fail
if the node has no memory.
Currently, alloc_fresh_huge_page() returns NULL when it is not able to
allocate a huge page on the current node, as specified by its custom
interleave variable. The callers of this function, though, assume that a
failure in alloc_fresh_huge_page() indicates no hugepages can be allocated
on the system period. This might not be the case, for instance, if we have
an uneven NUMA system, and we happen to try to allocate a hugepage on a
node with less memory and fail, while there is still plenty of free memory
on the other nodes.
To correct this, make alloc_fresh_huge_page() search through all online
nodes before deciding no hugepages can be allocated. Add a helper function
for actually allocating the hugepage. Use a new global nid iterator to
control which nid to allocate on.
Note: we expect particular semantics for __GFP_THISNODE, which are now
enforced even for memoryless nodes. That is, there is should be no
fallback to other nodes. Therefore, we rely on the nid passed into
alloc_pages_node() to be the nid the page comes from. If this is
incorrect, accounting will break.
Tested on x86 !NUMA, x86 NUMA, x86_64 NUMA and ppc64 NUMA (with 2
memoryless nodes).
Before on the ppc64 box:
Trying to clear the hugetlb pool
Done. 0 free
Trying to resize the pool to 100
Node 0 HugePages_Free: 25
Node 1 HugePages_Free: 75
Node 2 HugePages_Free: 0
Node 3 HugePages_Free: 0
Done. Initially 100 free
Trying to resize the pool to 200
Node 0 HugePages_Free: 50
Node 1 HugePages_Free: 150
Node 2 HugePages_Free: 0
Node 3 HugePages_Free: 0
Done. 200 free
After:
Trying to clear the hugetlb pool
Done. 0 free
Trying to resize the pool to 100
Node 0 HugePages_Free: 50
Node 1 HugePages_Free: 50
Node 2 HugePages_Free: 0
Node 3 HugePages_Free: 0
Done. Initially 100 free
Trying to resize the pool to 200
Node 0 HugePages_Free: 100
Node 1 HugePages_Free: 100
Node 2 HugePages_Free: 0
Node 3 HugePages_Free: 0
Done. 200 free
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Ken Chen <kenchen@google.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:26:24 +00:00
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:04 +00:00
|
|
|
static struct folio *__alloc_fresh_hugetlb_folio(struct hstate *h,
|
|
|
|
gfp_t gfp_mask, int nid, nodemask_t *nmask,
|
|
|
|
nodemask_t *node_alloc_noretry)
|
2018-02-01 00:20:56 +00:00
|
|
|
{
|
2022-11-29 22:50:37 +00:00
|
|
|
struct folio *folio;
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
bool retry = false;
|
2018-02-01 00:20:56 +00:00
|
|
|
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
retry:
|
2018-02-01 00:20:56 +00:00
|
|
|
if (hstate_is_gigantic(h))
|
2022-11-29 22:50:39 +00:00
|
|
|
folio = alloc_gigantic_folio(h, gfp_mask, nid, nmask);
|
2018-02-01 00:20:56 +00:00
|
|
|
else
|
2022-11-29 22:50:39 +00:00
|
|
|
folio = alloc_buddy_hugetlb_folio(h, gfp_mask,
|
2019-09-23 22:37:35 +00:00
|
|
|
nid, nmask, node_alloc_noretry);
|
2022-11-29 22:50:39 +00:00
|
|
|
if (!folio)
|
2018-02-01 00:20:56 +00:00
|
|
|
return NULL;
|
2023-10-19 02:31:04 +00:00
|
|
|
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
if (hstate_is_gigantic(h)) {
|
2022-11-29 22:50:38 +00:00
|
|
|
if (!prep_compound_gigantic_folio(folio, huge_page_order(h))) {
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
/*
|
|
|
|
* Rare failure to convert pages to compound page.
|
|
|
|
* Free pages and try again - ONCE!
|
|
|
|
*/
|
2022-11-29 22:50:37 +00:00
|
|
|
free_gigantic_folio(folio, huge_page_order(h));
|
hugetlb: address ref count racing in prep_compound_gigantic_page
In [1], Jann Horn points out a possible race between
prep_compound_gigantic_page and __page_cache_add_speculative. The root
cause of the possible race is prep_compound_gigantic_page uncondittionally
setting the ref count of pages to zero. It does this because
prep_compound_gigantic_page is handed a 'group' of pages from an allocator
and needs to convert that group of pages to a compound page. The ref
count of each page in this 'group' is one as set by the allocator.
However, the ref count of compound page tail pages must be zero.
The potential race comes about when ref counted pages are returned from
the allocator. When this happens, other mm code could also take a
reference on the page. __page_cache_add_speculative is one such example.
Therefore, prep_compound_gigantic_page can not just set the ref count of
pages to zero as it does today. Doing so would lose the reference taken
by any other code. This would lead to BUGs in code checking ref counts
and could possibly even lead to memory corruption.
There are two possible ways to address this issue.
1) Make all allocators of gigantic groups of pages be able to return a
properly constructed compound page.
2) Make prep_compound_gigantic_page be more careful when constructing a
compound page.
This patch takes approach 2.
In prep_compound_gigantic_page, use cmpxchg to only set ref count to zero
if it is one. If the cmpxchg fails, call synchronize_rcu() in the hope
that the extra ref count will be driopped during a rcu grace period. This
is not a performance critical code path and the wait should be
accceptable. If the ref count is still inflated after the grace period,
then undo any modifications made and return an error.
Currently prep_compound_gigantic_page is type void and does not return
errors. Modify the two callers to check for and handle error returns. On
error, the caller must free the 'group' of pages as they can not be used
to form a gigantic page. After freeing pages, the runtime caller
(alloc_fresh_huge_page) will retry the allocation once. Boot time
allocations can not be retried.
The routine prep_compound_page also unconditionally sets the ref count of
compound page tail pages to zero. However, in this case the buddy
allocator is constructing a compound page from freshly allocated pages.
The ref count on those freshly allocated pages is already zero, so the
set_page_count(p, 0) is unnecessary and could lead to confusion. Just
remove it.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210622021423.154662-3-mike.kravetz@oracle.com
Fixes: 58a84aa92723 ("thp: set compound tail page _count to zero")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:34 +00:00
|
|
|
if (!retry) {
|
|
|
|
retry = true;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
2018-02-01 00:20:56 +00:00
|
|
|
|
2022-11-29 22:50:39 +00:00
|
|
|
return folio;
|
2018-02-01 00:20:56 +00:00
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:04 +00:00
|
|
|
static struct folio *only_alloc_fresh_hugetlb_folio(struct hstate *h,
|
|
|
|
gfp_t gfp_mask, int nid, nodemask_t *nmask,
|
|
|
|
nodemask_t *node_alloc_noretry)
|
|
|
|
{
|
|
|
|
struct folio *folio;
|
|
|
|
|
|
|
|
folio = __alloc_fresh_hugetlb_folio(h, gfp_mask, nid, nmask,
|
|
|
|
node_alloc_noretry);
|
|
|
|
if (folio)
|
|
|
|
init_new_hugetlb_folio(h, folio);
|
|
|
|
return folio;
|
|
|
|
}
|
|
|
|
|
2018-02-01 00:20:41 +00:00
|
|
|
/*
|
2023-10-19 02:31:04 +00:00
|
|
|
* Common helper to allocate a fresh hugetlb page. All specific allocators
|
|
|
|
* should use this function to get new hugetlb pages
|
|
|
|
*
|
|
|
|
* Note that returned page is 'frozen': ref count of head page and all tail
|
|
|
|
* pages is zero.
|
2018-02-01 00:20:41 +00:00
|
|
|
*/
|
2023-10-19 02:31:04 +00:00
|
|
|
static struct folio *alloc_fresh_hugetlb_folio(struct hstate *h,
|
2024-05-16 08:10:35 +00:00
|
|
|
gfp_t gfp_mask, int nid, nodemask_t *nmask)
|
2013-09-11 21:21:00 +00:00
|
|
|
{
|
2022-11-29 22:50:39 +00:00
|
|
|
struct folio *folio;
|
2023-10-19 02:31:04 +00:00
|
|
|
|
2024-05-16 08:10:35 +00:00
|
|
|
folio = __alloc_fresh_hugetlb_folio(h, gfp_mask, nid, nmask, NULL);
|
2023-10-19 02:31:04 +00:00
|
|
|
if (!folio)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
prep_new_hugetlb_folio(h, folio, folio_nid(folio));
|
|
|
|
return folio;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void prep_and_add_allocated_folios(struct hstate *h,
|
|
|
|
struct list_head *folio_list)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
struct folio *folio, *tmp_f;
|
|
|
|
|
2023-10-19 02:31:05 +00:00
|
|
|
/* Send list for bulk vmemmap optimization processing */
|
|
|
|
hugetlb_vmemmap_optimize_folios(h, folio_list);
|
|
|
|
|
2023-10-19 02:31:04 +00:00
|
|
|
/* Add all new pool pages to free lists in one lock cycle */
|
|
|
|
spin_lock_irqsave(&hugetlb_lock, flags);
|
|
|
|
list_for_each_entry_safe(folio, tmp_f, folio_list, lru) {
|
|
|
|
__prep_account_new_huge_page(h, folio_nid(folio));
|
|
|
|
enqueue_hugetlb_folio(h, folio);
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hugetlb_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocates a fresh hugetlb page in a node interleaved manner. The page
|
|
|
|
* will later be added to the appropriate hugetlb pool.
|
|
|
|
*/
|
|
|
|
static struct folio *alloc_pool_huge_folio(struct hstate *h,
|
|
|
|
nodemask_t *nodes_allowed,
|
2024-02-22 14:04:16 +00:00
|
|
|
nodemask_t *node_alloc_noretry,
|
|
|
|
int *next_node)
|
2023-10-19 02:31:04 +00:00
|
|
|
{
|
2018-02-01 00:20:41 +00:00
|
|
|
gfp_t gfp_mask = htlb_alloc_mask(h) | __GFP_THISNODE;
|
2023-10-19 02:31:04 +00:00
|
|
|
int nr_nodes, node;
|
2013-09-11 21:21:00 +00:00
|
|
|
|
2024-02-22 14:04:16 +00:00
|
|
|
for_each_node_mask_to_alloc(next_node, nr_nodes, node, nodes_allowed) {
|
2023-10-19 02:31:04 +00:00
|
|
|
struct folio *folio;
|
|
|
|
|
|
|
|
folio = only_alloc_fresh_hugetlb_folio(h, gfp_mask, node,
|
2022-11-29 22:50:39 +00:00
|
|
|
nodes_allowed, node_alloc_noretry);
|
2023-10-19 02:31:04 +00:00
|
|
|
if (folio)
|
|
|
|
return folio;
|
2013-09-11 21:21:00 +00:00
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:04 +00:00
|
|
|
return NULL;
|
2013-09-11 21:21:00 +00:00
|
|
|
}
|
|
|
|
|
2009-09-22 00:01:22 +00:00
|
|
|
/*
|
2021-05-05 01:35:03 +00:00
|
|
|
* Remove huge page from pool from next node to free. Attempt to keep
|
|
|
|
* persistent huge pages more or less balanced over allowed nodes.
|
|
|
|
* This routine only 'removes' the hugetlb page. The caller must make
|
|
|
|
* an additional call to free the page to low level allocators.
|
2009-09-22 00:01:22 +00:00
|
|
|
* Called with hugetlb_lock locked.
|
|
|
|
*/
|
2023-08-24 14:13:25 +00:00
|
|
|
static struct folio *remove_pool_hugetlb_folio(struct hstate *h,
|
|
|
|
nodemask_t *nodes_allowed, bool acct_surplus)
|
2009-09-22 00:01:22 +00:00
|
|
|
{
|
2013-09-11 21:21:00 +00:00
|
|
|
int nr_nodes, node;
|
2023-08-24 14:13:24 +00:00
|
|
|
struct folio *folio = NULL;
|
2009-09-22 00:01:22 +00:00
|
|
|
|
2021-05-05 01:35:10 +00:00
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
2013-09-11 21:21:00 +00:00
|
|
|
for_each_node_mask_to_free(h, nr_nodes, node, nodes_allowed) {
|
2009-09-22 00:01:23 +00:00
|
|
|
/*
|
|
|
|
* If we're returning unused surplus pages, only examine
|
|
|
|
* nodes with surplus pages.
|
|
|
|
*/
|
2013-09-11 21:21:00 +00:00
|
|
|
if ((!acct_surplus || h->surplus_huge_pages_node[node]) &&
|
|
|
|
!list_empty(&h->hugepage_freelists[node])) {
|
2023-08-24 14:13:24 +00:00
|
|
|
folio = list_entry(h->hugepage_freelists[node].next,
|
|
|
|
struct folio, lru);
|
2022-11-29 22:50:33 +00:00
|
|
|
remove_hugetlb_folio(h, folio, acct_surplus);
|
2009-12-15 01:58:15 +00:00
|
|
|
break;
|
2009-09-22 00:01:22 +00:00
|
|
|
}
|
2013-09-11 21:21:00 +00:00
|
|
|
}
|
2009-09-22 00:01:22 +00:00
|
|
|
|
2023-08-24 14:13:25 +00:00
|
|
|
return folio;
|
2009-09-22 00:01:22 +00:00
|
|
|
}
|
|
|
|
|
2013-09-11 21:22:09 +00:00
|
|
|
/*
|
2024-04-11 16:47:56 +00:00
|
|
|
* Dissolve a given free hugetlb folio into free buddy pages. This function
|
|
|
|
* does nothing for in-use hugetlb folios and non-hugetlb folios.
|
mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
madvise(MADV_SOFT_OFFLINE) often returns -EBUSY when calling soft offline
for hugepages with overcommitting enabled. That was caused by the
suboptimal code in current soft-offline code. See the following part:
ret = migrate_pages(&pagelist, new_page, NULL, MPOL_MF_MOVE_ALL,
MIGRATE_SYNC, MR_MEMORY_FAILURE);
if (ret) {
...
} else {
/*
* We set PG_hwpoison only when the migration source hugepage
* was successfully dissolved, because otherwise hwpoisoned
* hugepage remains on free hugepage list, then userspace will
* find it as SIGBUS by allocation failure. That's not expected
* in soft-offlining.
*/
ret = dissolve_free_huge_page(page);
if (!ret) {
if (set_hwpoison_free_buddy_page(page))
num_poisoned_pages_inc();
}
}
return ret;
Here dissolve_free_huge_page() returns -EBUSY if the migration source page
was freed into buddy in migrate_pages(), but even in that case we actually
has a chance that set_hwpoison_free_buddy_page() succeeds. So that means
current code gives up offlining too early now.
dissolve_free_huge_page() checks that a given hugepage is suitable for
dissolving, where we should return success for !PageHuge() case because
the given hugepage is considered as already dissolved.
This change also affects other callers of dissolve_free_huge_page(), which
are cleaned up together.
[n-horiguchi@ah.jp.nec.com: v3]
Link: http://lkml.kernel.org/r/1560761476-4651-3-git-send-email-n-horiguchi@ah.jp.nec.comLink: http://lkml.kernel.org/r/1560154686-18497-3-git-send-email-n-horiguchi@ah.jp.nec.com
Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Chen, Jerry T <jerry.t.chen@intel.com>
Tested-by: Chen, Jerry T <jerry.t.chen@intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Cc: "Chen, Jerry T" <jerry.t.chen@intel.com>
Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-28 19:06:56 +00:00
|
|
|
* This function returns values like below:
|
|
|
|
*
|
2021-07-01 01:47:21 +00:00
|
|
|
* -ENOMEM: failed to allocate vmemmap pages to free the freed hugepages
|
|
|
|
* when the system is under memory pressure and the feature of
|
|
|
|
* freeing unused vmemmap pages associated with each hugetlb page
|
|
|
|
* is enabled.
|
|
|
|
* -EBUSY: failed to dissolved free hugepages or the hugepage is in-use
|
|
|
|
* (allocated or reserved.)
|
|
|
|
* 0: successfully dissolved free hugepages or the page is not a
|
|
|
|
* hugepage (considered as already dissolved)
|
2013-09-11 21:22:09 +00:00
|
|
|
*/
|
2024-04-11 16:47:56 +00:00
|
|
|
int dissolve_free_hugetlb_folio(struct folio *folio)
|
2013-09-11 21:22:09 +00:00
|
|
|
{
|
2018-08-24 00:00:38 +00:00
|
|
|
int rc = -EBUSY;
|
2016-10-08 00:01:10 +00:00
|
|
|
|
2021-02-05 02:32:06 +00:00
|
|
|
retry:
|
mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
madvise(MADV_SOFT_OFFLINE) often returns -EBUSY when calling soft offline
for hugepages with overcommitting enabled. That was caused by the
suboptimal code in current soft-offline code. See the following part:
ret = migrate_pages(&pagelist, new_page, NULL, MPOL_MF_MOVE_ALL,
MIGRATE_SYNC, MR_MEMORY_FAILURE);
if (ret) {
...
} else {
/*
* We set PG_hwpoison only when the migration source hugepage
* was successfully dissolved, because otherwise hwpoisoned
* hugepage remains on free hugepage list, then userspace will
* find it as SIGBUS by allocation failure. That's not expected
* in soft-offlining.
*/
ret = dissolve_free_huge_page(page);
if (!ret) {
if (set_hwpoison_free_buddy_page(page))
num_poisoned_pages_inc();
}
}
return ret;
Here dissolve_free_huge_page() returns -EBUSY if the migration source page
was freed into buddy in migrate_pages(), but even in that case we actually
has a chance that set_hwpoison_free_buddy_page() succeeds. So that means
current code gives up offlining too early now.
dissolve_free_huge_page() checks that a given hugepage is suitable for
dissolving, where we should return success for !PageHuge() case because
the given hugepage is considered as already dissolved.
This change also affects other callers of dissolve_free_huge_page(), which
are cleaned up together.
[n-horiguchi@ah.jp.nec.com: v3]
Link: http://lkml.kernel.org/r/1560761476-4651-3-git-send-email-n-horiguchi@ah.jp.nec.comLink: http://lkml.kernel.org/r/1560154686-18497-3-git-send-email-n-horiguchi@ah.jp.nec.com
Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Chen, Jerry T <jerry.t.chen@intel.com>
Tested-by: Chen, Jerry T <jerry.t.chen@intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Cc: "Chen, Jerry T" <jerry.t.chen@intel.com>
Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-28 19:06:56 +00:00
|
|
|
/* Not to disrupt normal path by vainly holding hugetlb_lock */
|
2022-11-29 22:50:32 +00:00
|
|
|
if (!folio_test_hugetlb(folio))
|
mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
madvise(MADV_SOFT_OFFLINE) often returns -EBUSY when calling soft offline
for hugepages with overcommitting enabled. That was caused by the
suboptimal code in current soft-offline code. See the following part:
ret = migrate_pages(&pagelist, new_page, NULL, MPOL_MF_MOVE_ALL,
MIGRATE_SYNC, MR_MEMORY_FAILURE);
if (ret) {
...
} else {
/*
* We set PG_hwpoison only when the migration source hugepage
* was successfully dissolved, because otherwise hwpoisoned
* hugepage remains on free hugepage list, then userspace will
* find it as SIGBUS by allocation failure. That's not expected
* in soft-offlining.
*/
ret = dissolve_free_huge_page(page);
if (!ret) {
if (set_hwpoison_free_buddy_page(page))
num_poisoned_pages_inc();
}
}
return ret;
Here dissolve_free_huge_page() returns -EBUSY if the migration source page
was freed into buddy in migrate_pages(), but even in that case we actually
has a chance that set_hwpoison_free_buddy_page() succeeds. So that means
current code gives up offlining too early now.
dissolve_free_huge_page() checks that a given hugepage is suitable for
dissolving, where we should return success for !PageHuge() case because
the given hugepage is considered as already dissolved.
This change also affects other callers of dissolve_free_huge_page(), which
are cleaned up together.
[n-horiguchi@ah.jp.nec.com: v3]
Link: http://lkml.kernel.org/r/1560761476-4651-3-git-send-email-n-horiguchi@ah.jp.nec.comLink: http://lkml.kernel.org/r/1560154686-18497-3-git-send-email-n-horiguchi@ah.jp.nec.com
Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Chen, Jerry T <jerry.t.chen@intel.com>
Tested-by: Chen, Jerry T <jerry.t.chen@intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Cc: "Chen, Jerry T" <jerry.t.chen@intel.com>
Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-28 19:06:56 +00:00
|
|
|
return 0;
|
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2022-11-29 22:50:32 +00:00
|
|
|
if (!folio_test_hugetlb(folio)) {
|
mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
madvise(MADV_SOFT_OFFLINE) often returns -EBUSY when calling soft offline
for hugepages with overcommitting enabled. That was caused by the
suboptimal code in current soft-offline code. See the following part:
ret = migrate_pages(&pagelist, new_page, NULL, MPOL_MF_MOVE_ALL,
MIGRATE_SYNC, MR_MEMORY_FAILURE);
if (ret) {
...
} else {
/*
* We set PG_hwpoison only when the migration source hugepage
* was successfully dissolved, because otherwise hwpoisoned
* hugepage remains on free hugepage list, then userspace will
* find it as SIGBUS by allocation failure. That's not expected
* in soft-offlining.
*/
ret = dissolve_free_huge_page(page);
if (!ret) {
if (set_hwpoison_free_buddy_page(page))
num_poisoned_pages_inc();
}
}
return ret;
Here dissolve_free_huge_page() returns -EBUSY if the migration source page
was freed into buddy in migrate_pages(), but even in that case we actually
has a chance that set_hwpoison_free_buddy_page() succeeds. So that means
current code gives up offlining too early now.
dissolve_free_huge_page() checks that a given hugepage is suitable for
dissolving, where we should return success for !PageHuge() case because
the given hugepage is considered as already dissolved.
This change also affects other callers of dissolve_free_huge_page(), which
are cleaned up together.
[n-horiguchi@ah.jp.nec.com: v3]
Link: http://lkml.kernel.org/r/1560761476-4651-3-git-send-email-n-horiguchi@ah.jp.nec.comLink: http://lkml.kernel.org/r/1560154686-18497-3-git-send-email-n-horiguchi@ah.jp.nec.com
Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Chen, Jerry T <jerry.t.chen@intel.com>
Tested-by: Chen, Jerry T <jerry.t.chen@intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Cc: "Chen, Jerry T" <jerry.t.chen@intel.com>
Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-28 19:06:56 +00:00
|
|
|
rc = 0;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:32 +00:00
|
|
|
if (!folio_ref_count(folio)) {
|
|
|
|
struct hstate *h = folio_hstate(folio);
|
2022-09-22 02:19:29 +00:00
|
|
|
if (!available_huge_pages(h))
|
2016-10-08 00:01:10 +00:00
|
|
|
goto out;
|
2021-02-05 02:32:06 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* We should make sure that the page is already on the free list
|
|
|
|
* when it is dissolved.
|
|
|
|
*/
|
2022-11-29 22:50:32 +00:00
|
|
|
if (unlikely(!folio_test_hugetlb_freed(folio))) {
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2021-02-05 02:32:06 +00:00
|
|
|
cond_resched();
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Theoretically, we should return -EBUSY when we
|
|
|
|
* encounter this race. In fact, we have a chance
|
|
|
|
* to successfully dissolve the page if we do a
|
|
|
|
* retry. Because the race window is quite small.
|
|
|
|
* If we seize this opportunity, it is an optimization
|
|
|
|
* for increasing the success rate of dissolving page.
|
|
|
|
*/
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
2022-11-29 22:50:33 +00:00
|
|
|
remove_hugetlb_folio(h, folio, false);
|
2016-08-11 22:32:55 +00:00
|
|
|
h->max_huge_pages--;
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2021-07-01 01:47:21 +00:00
|
|
|
|
|
|
|
/*
|
2022-11-29 22:50:34 +00:00
|
|
|
* Normally update_and_free_hugtlb_folio will allocate required vmemmmap
|
|
|
|
* before freeing the page. update_and_free_hugtlb_folio will fail to
|
2021-07-01 01:47:21 +00:00
|
|
|
* free the page if it can not allocate required vmemmap. We
|
|
|
|
* need to adjust max_huge_pages if the page is not freed.
|
|
|
|
* Attempt to allocate vmemmmap here so that we can take
|
|
|
|
* appropriate action on failure.
|
2023-10-17 02:55:49 +00:00
|
|
|
*
|
|
|
|
* The folio_test_hugetlb check here is because
|
|
|
|
* remove_hugetlb_folio will clear hugetlb folio flag for
|
|
|
|
* non-vmemmap optimized hugetlb folios.
|
2021-07-01 01:47:21 +00:00
|
|
|
*/
|
2023-10-17 02:55:49 +00:00
|
|
|
if (folio_test_hugetlb(folio)) {
|
2023-10-11 14:45:57 +00:00
|
|
|
rc = hugetlb_vmemmap_restore_folio(h, folio);
|
2023-10-17 02:55:49 +00:00
|
|
|
if (rc) {
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
|
|
|
add_hugetlb_folio(h, folio, false);
|
|
|
|
h->max_huge_pages++;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
rc = 0;
|
2021-07-01 01:47:21 +00:00
|
|
|
|
2023-10-17 02:55:49 +00:00
|
|
|
update_and_free_hugetlb_folio(h, folio, false);
|
2021-07-01 01:47:21 +00:00
|
|
|
return rc;
|
2013-09-11 21:22:09 +00:00
|
|
|
}
|
2016-10-08 00:01:10 +00:00
|
|
|
out:
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2016-10-08 00:01:10 +00:00
|
|
|
return rc;
|
2013-09-11 21:22:09 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Dissolve free hugepages in a given pfn range. Used by memory hotplug to
|
|
|
|
* make specified memory blocks removable from the system.
|
mm/hugetlb: fix memory offline with hugepage size > memory block size
Patch series "mm/hugetlb: memory offline issues with hugepages", v4.
This addresses several issues with hugepages and memory offline. While
the first patch fixes a panic, and is therefore rather important, the
last patch is just a performance optimization.
The second patch fixes a theoretical issue with reserved hugepages,
while still leaving some ugly usability issue, see description.
This patch (of 3):
dissolve_free_huge_pages() will either run into the VM_BUG_ON() or a
list corruption and addressing exception when trying to set a memory
block offline that is part (but not the first part) of a "gigantic"
hugetlb page with a size > memory block size.
When no other smaller hugetlb page sizes are present, the VM_BUG_ON()
will trigger directly. In the other case we will run into an addressing
exception later, because dissolve_free_huge_page() will not work on the
head page of the compound hugetlb page which will result in a NULL
hstate from page_hstate().
To fix this, first remove the VM_BUG_ON() because it is wrong, and then
use the compound head page in dissolve_free_huge_page(). This means
that an unused pre-allocated gigantic page that has any part of itself
inside the memory block that is going offline will be dissolved
completely. Losing an unused gigantic hugepage is preferable to failing
the memory offline, for example in the situation where a (possibly
faulty) memory DIMM needs to go offline.
Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Link: http://lkml.kernel.org/r/20160926172811.94033-2-gerald.schaefer@de.ibm.com
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rui Teng <rui.teng@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 00:01:07 +00:00
|
|
|
* Note that this will dissolve a free gigantic hugepage completely, if any
|
|
|
|
* part of it lies within the given range.
|
2024-04-11 16:47:56 +00:00
|
|
|
* Also note that if dissolve_free_hugetlb_folio() returns with an error, all
|
|
|
|
* free hugetlb folios that were dissolved before that error are lost.
|
2013-09-11 21:22:09 +00:00
|
|
|
*/
|
2024-04-12 18:21:39 +00:00
|
|
|
int dissolve_free_hugetlb_folios(unsigned long start_pfn, unsigned long end_pfn)
|
2013-09-11 21:22:09 +00:00
|
|
|
{
|
|
|
|
unsigned long pfn;
|
2024-04-11 16:47:56 +00:00
|
|
|
struct folio *folio;
|
2016-10-08 00:01:10 +00:00
|
|
|
int rc = 0;
|
2022-06-16 03:38:46 +00:00
|
|
|
unsigned int order;
|
|
|
|
struct hstate *h;
|
2013-09-11 21:22:09 +00:00
|
|
|
|
2014-08-06 23:07:56 +00:00
|
|
|
if (!hugepages_supported())
|
2016-10-08 00:01:10 +00:00
|
|
|
return rc;
|
2014-08-06 23:07:56 +00:00
|
|
|
|
2022-06-16 03:38:46 +00:00
|
|
|
order = huge_page_order(&default_hstate);
|
|
|
|
for_each_hstate(h)
|
|
|
|
order = min(order, huge_page_order(h));
|
|
|
|
|
|
|
|
for (pfn = start_pfn; pfn < end_pfn; pfn += 1 << order) {
|
2024-04-11 16:47:56 +00:00
|
|
|
folio = pfn_folio(pfn);
|
|
|
|
rc = dissolve_free_hugetlb_folio(folio);
|
mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
madvise(MADV_SOFT_OFFLINE) often returns -EBUSY when calling soft offline
for hugepages with overcommitting enabled. That was caused by the
suboptimal code in current soft-offline code. See the following part:
ret = migrate_pages(&pagelist, new_page, NULL, MPOL_MF_MOVE_ALL,
MIGRATE_SYNC, MR_MEMORY_FAILURE);
if (ret) {
...
} else {
/*
* We set PG_hwpoison only when the migration source hugepage
* was successfully dissolved, because otherwise hwpoisoned
* hugepage remains on free hugepage list, then userspace will
* find it as SIGBUS by allocation failure. That's not expected
* in soft-offlining.
*/
ret = dissolve_free_huge_page(page);
if (!ret) {
if (set_hwpoison_free_buddy_page(page))
num_poisoned_pages_inc();
}
}
return ret;
Here dissolve_free_huge_page() returns -EBUSY if the migration source page
was freed into buddy in migrate_pages(), but even in that case we actually
has a chance that set_hwpoison_free_buddy_page() succeeds. So that means
current code gives up offlining too early now.
dissolve_free_huge_page() checks that a given hugepage is suitable for
dissolving, where we should return success for !PageHuge() case because
the given hugepage is considered as already dissolved.
This change also affects other callers of dissolve_free_huge_page(), which
are cleaned up together.
[n-horiguchi@ah.jp.nec.com: v3]
Link: http://lkml.kernel.org/r/1560761476-4651-3-git-send-email-n-horiguchi@ah.jp.nec.comLink: http://lkml.kernel.org/r/1560154686-18497-3-git-send-email-n-horiguchi@ah.jp.nec.com
Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Chen, Jerry T <jerry.t.chen@intel.com>
Tested-by: Chen, Jerry T <jerry.t.chen@intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Cc: "Chen, Jerry T" <jerry.t.chen@intel.com>
Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-28 19:06:56 +00:00
|
|
|
if (rc)
|
|
|
|
break;
|
2016-10-08 00:01:13 +00:00
|
|
|
}
|
2016-10-08 00:01:10 +00:00
|
|
|
|
|
|
|
return rc;
|
2013-09-11 21:22:09 +00:00
|
|
|
}
|
|
|
|
|
2018-02-01 00:20:48 +00:00
|
|
|
/*
|
|
|
|
* Allocates a fresh surplus page from the page allocator.
|
|
|
|
*/
|
2023-01-13 22:30:53 +00:00
|
|
|
static struct folio *alloc_surplus_hugetlb_folio(struct hstate *h,
|
|
|
|
gfp_t gfp_mask, int nid, nodemask_t *nmask)
|
2007-10-16 08:26:18 +00:00
|
|
|
{
|
2022-11-29 22:50:39 +00:00
|
|
|
struct folio *folio = NULL;
|
2007-10-16 08:26:18 +00:00
|
|
|
|
2014-06-04 23:07:08 +00:00
|
|
|
if (hstate_is_gigantic(h))
|
2008-07-24 04:27:47 +00:00
|
|
|
return NULL;
|
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2018-02-01 00:20:52 +00:00
|
|
|
if (h->surplus_huge_pages >= h->nr_overcommit_huge_pages)
|
|
|
|
goto out_unlock;
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
hugetlb: introduce nr_overcommit_hugepages sysctl
hugetlb: introduce nr_overcommit_hugepages sysctl
While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I
became convinced that having a boolean sysctl was insufficient:
1) To support per-node control of hugepages, I have previously submitted
patches to add a sysfs attribute related to nr_hugepages. However, with
a boolean global value and per-mount quota enforcement constraining the
dynamic pool, adding corresponding control of the dynamic pool on a
per-node basis seems inconsistent to me.
2) Administration of the hugetlb dynamic pool with multiple hugetlbfs
mount points is, arguably, more arduous than it needs to be. Each quota
would need to be set separately, and the sum would need to be monitored.
To ease the administration, and to help make the way for per-node
control of the static & dynamic hugepage pool, I added a separate
sysctl, nr_overcommit_hugepages. This value serves as a high watermark
for the overall hugepage pool, while nr_hugepages serves as a low
watermark. The boolean sysctl can then be removed, as the condition
nr_overcommit_hugepages > 0
indicates the same administrative setting as
hugetlb_dynamic_pool == 1
Quotas still serve as local enforcement of the size of the pool on a
per-mount basis.
A few caveats:
1) There is a race whereby the global surplus huge page counter is
incremented before a hugepage has allocated. Another process could then
try grow the pool, and fail to convert a surplus huge page to a normal
huge page and instead allocate a fresh huge page. I believe this is
benign, as no memory is leaked (the actual pages are still tracked
correctly) and the counters won't go out of sync.
2) Shrinking the static pool while a surplus is in effect will allow the
number of surplus huge pages to exceed the overcommit value. As long as
this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
Successfully tested on x86_64 with the current libhugetlbfs snapshot,
modified to use the new sysctl.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18 00:20:12 +00:00
|
|
|
|
2024-05-16 08:10:35 +00:00
|
|
|
folio = alloc_fresh_hugetlb_folio(h, gfp_mask, nid, nmask);
|
2022-11-29 22:50:39 +00:00
|
|
|
if (!folio)
|
2018-02-01 00:20:56 +00:00
|
|
|
return NULL;
|
hugetlb: introduce nr_overcommit_hugepages sysctl
hugetlb: introduce nr_overcommit_hugepages sysctl
While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I
became convinced that having a boolean sysctl was insufficient:
1) To support per-node control of hugepages, I have previously submitted
patches to add a sysfs attribute related to nr_hugepages. However, with
a boolean global value and per-mount quota enforcement constraining the
dynamic pool, adding corresponding control of the dynamic pool on a
per-node basis seems inconsistent to me.
2) Administration of the hugetlb dynamic pool with multiple hugetlbfs
mount points is, arguably, more arduous than it needs to be. Each quota
would need to be set separately, and the sum would need to be monitored.
To ease the administration, and to help make the way for per-node
control of the static & dynamic hugepage pool, I added a separate
sysctl, nr_overcommit_hugepages. This value serves as a high watermark
for the overall hugepage pool, while nr_hugepages serves as a low
watermark. The boolean sysctl can then be removed, as the condition
nr_overcommit_hugepages > 0
indicates the same administrative setting as
hugetlb_dynamic_pool == 1
Quotas still serve as local enforcement of the size of the pool on a
per-mount basis.
A few caveats:
1) There is a race whereby the global surplus huge page counter is
incremented before a hugepage has allocated. Another process could then
try grow the pool, and fail to convert a surplus huge page to a normal
huge page and instead allocate a fresh huge page. I believe this is
benign, as no memory is leaked (the actual pages are still tracked
correctly) and the counters won't go out of sync.
2) Shrinking the static pool while a surplus is in effect will allow the
number of surplus huge pages to exceed the overcommit value. As long as
this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
Successfully tested on x86_64 with the current libhugetlbfs snapshot,
modified to use the new sysctl.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18 00:20:12 +00:00
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2018-02-01 00:20:52 +00:00
|
|
|
/*
|
|
|
|
* We could have raced with the pool size change.
|
|
|
|
* Double check that and simply deallocate the new page
|
|
|
|
* if we would end up overcommiting the surpluses. Abuse
|
2023-08-16 15:11:51 +00:00
|
|
|
* temporary page to workaround the nasty free_huge_folio
|
2018-02-01 00:20:52 +00:00
|
|
|
* codeflow
|
|
|
|
*/
|
|
|
|
if (h->surplus_huge_pages >= h->nr_overcommit_huge_pages) {
|
2022-11-29 22:50:39 +00:00
|
|
|
folio_set_hugetlb_temporary(folio);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2023-08-16 15:11:51 +00:00
|
|
|
free_huge_folio(folio);
|
2019-05-14 00:15:37 +00:00
|
|
|
return NULL;
|
2007-10-16 08:26:18 +00:00
|
|
|
}
|
2018-02-01 00:20:52 +00:00
|
|
|
|
2021-09-02 21:58:47 +00:00
|
|
|
h->surplus_huge_pages++;
|
2022-11-29 22:50:39 +00:00
|
|
|
h->surplus_huge_pages_node[folio_nid(folio)]++;
|
2021-09-02 21:58:47 +00:00
|
|
|
|
2018-02-01 00:20:52 +00:00
|
|
|
out_unlock:
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2007-10-16 08:26:18 +00:00
|
|
|
|
2023-01-13 22:30:53 +00:00
|
|
|
return folio;
|
2007-10-16 08:26:18 +00:00
|
|
|
}
|
|
|
|
|
2023-01-13 22:30:55 +00:00
|
|
|
static struct folio *alloc_migrate_hugetlb_folio(struct hstate *h, gfp_t gfp_mask,
|
2019-03-05 23:47:44 +00:00
|
|
|
int nid, nodemask_t *nmask)
|
2018-02-01 00:20:48 +00:00
|
|
|
{
|
2022-11-29 22:50:39 +00:00
|
|
|
struct folio *folio;
|
2018-02-01 00:20:48 +00:00
|
|
|
|
|
|
|
if (hstate_is_gigantic(h))
|
|
|
|
return NULL;
|
|
|
|
|
2024-05-16 08:10:35 +00:00
|
|
|
folio = alloc_fresh_hugetlb_folio(h, gfp_mask, nid, nmask);
|
2022-11-29 22:50:39 +00:00
|
|
|
if (!folio)
|
2018-02-01 00:20:48 +00:00
|
|
|
return NULL;
|
|
|
|
|
hugetlb: freeze allocated pages before creating hugetlb pages
When creating hugetlb pages, the hugetlb code must first allocate
contiguous pages from a low level allocator such as buddy, cma or
memblock. The pages returned from these low level allocators are ref
counted. This creates potential issues with other code taking speculative
references on these pages before they can be transformed to a hugetlb
page. This issue has been addressed with methods and code such as that
provided in [1].
Recent discussions about vmemmap freeing [2] have indicated that it would
be beneficial to freeze all sub pages, including the head page of pages
returned from low level allocators before converting to a hugetlb page.
This helps avoid races if we want to replace the page containing vmemmap
for the head page.
There have been proposals to change at least the buddy allocator to return
frozen pages as described at [3]. If such a change is made, it can be
employed by the hugetlb code. However, as mentioned above hugetlb uses
several low level allocators so each would need to be modified to return
frozen pages. For now, we can manually freeze the returned pages. This
is done in two places:
1) alloc_buddy_huge_page, only the returned head page is ref counted.
We freeze the head page, retrying once in the VERY rare case where
there may be an inflated ref count.
2) prep_compound_gigantic_page, for gigantic pages the current code
freezes all pages except the head page. New code will simply freeze
the head page as well.
In a few other places, code checks for inflated ref counts on newly
allocated hugetlb pages. With the modifications to freeze after
allocating, this code can be removed.
After hugetlb pages are freshly allocated, they are often added to the
hugetlb free lists. Since these pages were previously ref counted, this
was done via put_page() which would end up calling the hugetlb destructor:
free_huge_page. With changes to freeze pages, we simply call
free_huge_page directly to add the pages to the free list.
In a few other places, freshly allocated hugetlb pages were immediately
put into use, and the expectation was they were already ref counted. In
these cases, we must manually ref count the page.
[1] https://lore.kernel.org/linux-mm/20210622021423.154662-3-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20220802180309.19340-1-joao.m.martins@oracle.com/
[3] https://lore.kernel.org/linux-mm/20220809171854.3725722-1-willy@infradead.org/
[mike.kravetz@oracle.com: fix NULL pointer dereference]
Link: https://lkml.kernel.org/r/20220921202702.106069-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220916214638.155744-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-16 21:46:38 +00:00
|
|
|
/* fresh huge pages are frozen */
|
2022-11-29 22:50:39 +00:00
|
|
|
folio_ref_unfreeze(folio, 1);
|
2018-02-01 00:20:48 +00:00
|
|
|
/*
|
|
|
|
* We do not account these pages as surplus because they are only
|
|
|
|
* temporary and will be released properly on the last reference
|
|
|
|
*/
|
2022-11-29 22:50:39 +00:00
|
|
|
folio_set_hugetlb_temporary(folio);
|
2018-02-01 00:20:48 +00:00
|
|
|
|
2023-01-13 22:30:55 +00:00
|
|
|
return folio;
|
2018-02-01 00:20:48 +00:00
|
|
|
}
|
|
|
|
|
mm, hugetlb: use memory policy when available
I have a hugetlbfs user which is never explicitly allocating huge pages
with 'nr_hugepages'. They only set 'nr_overcommit_hugepages' and then let
the pages be allocated from the buddy allocator at fault time.
This works, but they noticed that mbind() was not doing them any good and
the pages were being allocated without respect for the policy they
specified.
The code in question is this:
> struct page *alloc_huge_page(struct vm_area_struct *vma,
...
> page = dequeue_huge_page_vma(h, vma, addr, avoid_reserve, gbl_chg);
> if (!page) {
> page = alloc_buddy_huge_page(h, NUMA_NO_NODE);
dequeue_huge_page_vma() is smart and will respect the VMA's memory policy.
But, it only grabs _existing_ huge pages from the huge page pool. If the
pool is empty, we fall back to alloc_buddy_huge_page() which obviously
can't do anything with the VMA's policy because it isn't even passed the
VMA.
Almost everybody preallocates huge pages. That's probably why nobody has
ever noticed this. Looking back at the git history, I don't think this
_ever_ worked from when alloc_buddy_huge_page() was introduced in
7893d1d5, 8 years ago.
The fix is to pass vma/addr down in to the places where we actually call
in to the buddy allocator. It's fairly straightforward plumbing. This
has been lightly tested.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:17 +00:00
|
|
|
/*
|
|
|
|
* Use the VMA's mpolicy to allocate a huge page from the buddy.
|
|
|
|
*/
|
2015-11-06 02:50:20 +00:00
|
|
|
static
|
2023-01-13 22:30:54 +00:00
|
|
|
struct folio *alloc_buddy_hugetlb_folio_with_mpol(struct hstate *h,
|
mm, hugetlb: use memory policy when available
I have a hugetlbfs user which is never explicitly allocating huge pages
with 'nr_hugepages'. They only set 'nr_overcommit_hugepages' and then let
the pages be allocated from the buddy allocator at fault time.
This works, but they noticed that mbind() was not doing them any good and
the pages were being allocated without respect for the policy they
specified.
The code in question is this:
> struct page *alloc_huge_page(struct vm_area_struct *vma,
...
> page = dequeue_huge_page_vma(h, vma, addr, avoid_reserve, gbl_chg);
> if (!page) {
> page = alloc_buddy_huge_page(h, NUMA_NO_NODE);
dequeue_huge_page_vma() is smart and will respect the VMA's memory policy.
But, it only grabs _existing_ huge pages from the huge page pool. If the
pool is empty, we fall back to alloc_buddy_huge_page() which obviously
can't do anything with the VMA's policy because it isn't even passed the
VMA.
Almost everybody preallocates huge pages. That's probably why nobody has
ever noticed this. Looking back at the git history, I don't think this
_ever_ worked from when alloc_buddy_huge_page() was introduced in
7893d1d5, 8 years ago.
The fix is to pass vma/addr down in to the places where we actually call
in to the buddy allocator. It's fairly straightforward plumbing. This
has been lightly tested.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:17 +00:00
|
|
|
struct vm_area_struct *vma, unsigned long addr)
|
|
|
|
{
|
2023-01-13 22:30:53 +00:00
|
|
|
struct folio *folio = NULL;
|
2017-07-10 22:49:08 +00:00
|
|
|
struct mempolicy *mpol;
|
|
|
|
gfp_t gfp_mask = htlb_alloc_mask(h);
|
|
|
|
int nid;
|
|
|
|
nodemask_t *nodemask;
|
|
|
|
|
|
|
|
nid = huge_node(vma, addr, gfp_mask, &mpol, &nodemask);
|
2021-09-02 22:00:13 +00:00
|
|
|
if (mpol_is_preferred_many(mpol)) {
|
|
|
|
gfp_t gfp = gfp_mask | __GFP_NOWARN;
|
|
|
|
|
|
|
|
gfp &= ~(__GFP_DIRECT_RECLAIM | __GFP_NOFAIL);
|
2023-01-13 22:30:53 +00:00
|
|
|
folio = alloc_surplus_hugetlb_folio(h, gfp, nid, nodemask);
|
2017-07-10 22:49:08 +00:00
|
|
|
|
2021-09-02 22:00:13 +00:00
|
|
|
/* Fallback to all nodes if page==NULL */
|
|
|
|
nodemask = NULL;
|
|
|
|
}
|
|
|
|
|
2023-01-13 22:30:53 +00:00
|
|
|
if (!folio)
|
|
|
|
folio = alloc_surplus_hugetlb_folio(h, gfp_mask, nid, nodemask);
|
2021-09-02 22:00:13 +00:00
|
|
|
mpol_cond_put(mpol);
|
2023-01-13 22:30:54 +00:00
|
|
|
return folio;
|
mm, hugetlb: use memory policy when available
I have a hugetlbfs user which is never explicitly allocating huge pages
with 'nr_hugepages'. They only set 'nr_overcommit_hugepages' and then let
the pages be allocated from the buddy allocator at fault time.
This works, but they noticed that mbind() was not doing them any good and
the pages were being allocated without respect for the policy they
specified.
The code in question is this:
> struct page *alloc_huge_page(struct vm_area_struct *vma,
...
> page = dequeue_huge_page_vma(h, vma, addr, avoid_reserve, gbl_chg);
> if (!page) {
> page = alloc_buddy_huge_page(h, NUMA_NO_NODE);
dequeue_huge_page_vma() is smart and will respect the VMA's memory policy.
But, it only grabs _existing_ huge pages from the huge page pool. If the
pool is empty, we fall back to alloc_buddy_huge_page() which obviously
can't do anything with the VMA's policy because it isn't even passed the
VMA.
Almost everybody preallocates huge pages. That's probably why nobody has
ever noticed this. Looking back at the git history, I don't think this
_ever_ worked from when alloc_buddy_huge_page() was introduced in
7893d1d5, 8 years ago.
The fix is to pass vma/addr down in to the places where we actually call
in to the buddy allocator. It's fairly straightforward plumbing. This
has been lightly tested.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:17 +00:00
|
|
|
}
|
|
|
|
|
2023-01-13 22:30:55 +00:00
|
|
|
/* folio migration callback function */
|
|
|
|
struct folio *alloc_hugetlb_folio_nodemask(struct hstate *h, int preferred_nid,
|
mm: hugetlb: make the hugetlb migration strategy consistent
As discussed in previous thread [1], there is an inconsistency when
handing hugetlb migration. When handling the migration of freed hugetlb,
it prevents fallback to other NUMA nodes in
alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use
hugetlb, it allows fallback to other NUMA nodes in
alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool
and might result in unexpected failures when node bound workloads doesn't
get what is asssumed available.
To make hugetlb migration strategy more clear, we should list all the scenarios
of hugetlb migration and analyze whether allocation fallback is permitted:
1) Memory offline: will call dissolve_free_huge_pages() to free the
freed hugetlb, and call do_migrate_range() to migrate the in-use
hugetlb. Both can break the per-node hugetlb pool, but as this is an
explicit offlining operation, no better choice. So should allow the
hugetlb allocation fallback.
2) Memory failure: same as memory offline. Should allow fallback to a
different node might be the only option to handle it, otherwise the
impact of poisoned memory can be amplified.
3) Longterm pinning: will call migrate_longterm_unpinnable_pages() to
migrate in-use and not-longterm-pinnable hugetlb, which can break the
per-node pool. But we should fail to longterm pinning if can not
allocate on current node to avoid breaking the per-node pool.
4) Syscalls (mbind, migrate_pages, move_pages): these are explicit
users operation to move pages to other nodes, so fallback to other
nodes should not be prohibited.
5) alloc_contig_range: used by CMA allocation and virtio-mem
fake-offline to allocate given range of pages. Now the freed hugetlb
migration is not allowed to fallback, to keep consistency, the in-use
hugetlb migration should be also not allowed to fallback.
6) alloc_contig_pages: used by kfence, pgtable_debug etc. The strategy
should be consistent with that of alloc_contig_range().
Based on the analysis of the various scenarios above, introducing a new
helper to determine whether fallback is permitted according to the
migration reason..
[1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/
Link: https://lkml.kernel.org/r/3519fcd41522817307a05b40fb551e2e17e68101.1709719720.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-06 10:13:27 +00:00
|
|
|
nodemask_t *nmask, gfp_t gfp_mask, bool allow_alloc_fallback)
|
2017-07-10 22:48:44 +00:00
|
|
|
{
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2022-09-22 02:19:29 +00:00
|
|
|
if (available_huge_pages(h)) {
|
2023-01-13 22:30:52 +00:00
|
|
|
struct folio *folio;
|
2017-07-10 22:49:11 +00:00
|
|
|
|
2023-01-13 22:30:52 +00:00
|
|
|
folio = dequeue_hugetlb_folio_nodemask(h, gfp_mask,
|
|
|
|
preferred_nid, nmask);
|
|
|
|
if (folio) {
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2023-01-13 22:30:55 +00:00
|
|
|
return folio;
|
2017-07-10 22:48:44 +00:00
|
|
|
}
|
|
|
|
}
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2017-07-10 22:48:44 +00:00
|
|
|
|
mm: hugetlb: make the hugetlb migration strategy consistent
As discussed in previous thread [1], there is an inconsistency when
handing hugetlb migration. When handling the migration of freed hugetlb,
it prevents fallback to other NUMA nodes in
alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use
hugetlb, it allows fallback to other NUMA nodes in
alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool
and might result in unexpected failures when node bound workloads doesn't
get what is asssumed available.
To make hugetlb migration strategy more clear, we should list all the scenarios
of hugetlb migration and analyze whether allocation fallback is permitted:
1) Memory offline: will call dissolve_free_huge_pages() to free the
freed hugetlb, and call do_migrate_range() to migrate the in-use
hugetlb. Both can break the per-node hugetlb pool, but as this is an
explicit offlining operation, no better choice. So should allow the
hugetlb allocation fallback.
2) Memory failure: same as memory offline. Should allow fallback to a
different node might be the only option to handle it, otherwise the
impact of poisoned memory can be amplified.
3) Longterm pinning: will call migrate_longterm_unpinnable_pages() to
migrate in-use and not-longterm-pinnable hugetlb, which can break the
per-node pool. But we should fail to longterm pinning if can not
allocate on current node to avoid breaking the per-node pool.
4) Syscalls (mbind, migrate_pages, move_pages): these are explicit
users operation to move pages to other nodes, so fallback to other
nodes should not be prohibited.
5) alloc_contig_range: used by CMA allocation and virtio-mem
fake-offline to allocate given range of pages. Now the freed hugetlb
migration is not allowed to fallback, to keep consistency, the in-use
hugetlb migration should be also not allowed to fallback.
6) alloc_contig_pages: used by kfence, pgtable_debug etc. The strategy
should be consistent with that of alloc_contig_range().
Based on the analysis of the various scenarios above, introducing a new
helper to determine whether fallback is permitted according to the
migration reason..
[1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/
Link: https://lkml.kernel.org/r/3519fcd41522817307a05b40fb551e2e17e68101.1709719720.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-06 10:13:27 +00:00
|
|
|
/* We cannot fallback to other nodes, as we could break the per-node pool. */
|
|
|
|
if (!allow_alloc_fallback)
|
|
|
|
gfp_mask |= __GFP_THISNODE;
|
|
|
|
|
2023-01-13 22:30:55 +00:00
|
|
|
return alloc_migrate_hugetlb_folio(h, gfp_mask, preferred_nid, nmask);
|
2017-07-10 22:48:44 +00:00
|
|
|
}
|
|
|
|
|
2024-06-21 19:00:50 +00:00
|
|
|
static nodemask_t *policy_mbind_nodemask(gfp_t gfp)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
struct mempolicy *mpol = get_task_policy(current);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Only enforce MPOL_BIND policy which overlaps with cpuset policy
|
|
|
|
* (from policy_nodemask) specifically for hugetlb case
|
|
|
|
*/
|
|
|
|
if (mpol->mode == MPOL_BIND &&
|
|
|
|
(apply_policy_zone(mpol, gfp_zone(gfp)) &&
|
|
|
|
cpuset_nodemask_valid_mems_allowed(&mpol->nodes)))
|
|
|
|
return &mpol->nodes;
|
|
|
|
#endif
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2007-10-16 08:26:19 +00:00
|
|
|
/*
|
2011-03-31 01:57:33 +00:00
|
|
|
* Increase the hugetlb pool such that it can accommodate a reservation
|
2007-10-16 08:26:19 +00:00
|
|
|
* of size 'delta'.
|
|
|
|
*/
|
2020-12-15 03:12:05 +00:00
|
|
|
static int gather_surplus_pages(struct hstate *h, long delta)
|
2020-04-07 03:08:09 +00:00
|
|
|
__must_hold(&hugetlb_lock)
|
2007-10-16 08:26:19 +00:00
|
|
|
{
|
2022-09-01 12:00:23 +00:00
|
|
|
LIST_HEAD(surplus_list);
|
2023-08-16 15:11:51 +00:00
|
|
|
struct folio *folio, *tmp;
|
2020-12-15 03:12:05 +00:00
|
|
|
int ret;
|
|
|
|
long i;
|
|
|
|
long needed, allocated;
|
2012-03-21 23:34:00 +00:00
|
|
|
bool alloc_ok = true;
|
2024-06-21 19:00:50 +00:00
|
|
|
int node;
|
|
|
|
nodemask_t *mbind_nodemask = policy_mbind_nodemask(htlb_alloc_mask(h));
|
2007-10-16 08:26:19 +00:00
|
|
|
|
2021-05-05 01:35:10 +00:00
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
2008-07-24 04:27:41 +00:00
|
|
|
needed = (h->resv_huge_pages + delta) - h->free_huge_pages;
|
2008-03-04 22:29:38 +00:00
|
|
|
if (needed <= 0) {
|
2008-07-24 04:27:41 +00:00
|
|
|
h->resv_huge_pages += delta;
|
2007-10-16 08:26:19 +00:00
|
|
|
return 0;
|
2008-03-04 22:29:38 +00:00
|
|
|
}
|
2007-10-16 08:26:19 +00:00
|
|
|
|
|
|
|
allocated = 0;
|
|
|
|
|
|
|
|
ret = -ENOMEM;
|
|
|
|
retry:
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2007-10-16 08:26:19 +00:00
|
|
|
for (i = 0; i < needed; i++) {
|
2024-07-12 06:36:42 +00:00
|
|
|
folio = NULL;
|
2024-06-21 19:00:50 +00:00
|
|
|
for_each_node_mask(node, cpuset_current_mems_allowed) {
|
|
|
|
if (!mbind_nodemask || node_isset(node, *mbind_nodemask)) {
|
|
|
|
folio = alloc_surplus_hugetlb_folio(h, htlb_alloc_mask(h),
|
|
|
|
node, NULL);
|
|
|
|
if (folio)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2023-01-13 22:30:53 +00:00
|
|
|
if (!folio) {
|
2012-03-21 23:34:00 +00:00
|
|
|
alloc_ok = false;
|
|
|
|
break;
|
|
|
|
}
|
2023-01-13 22:30:53 +00:00
|
|
|
list_add(&folio->lru, &surplus_list);
|
2017-07-10 22:48:50 +00:00
|
|
|
cond_resched();
|
2007-10-16 08:26:19 +00:00
|
|
|
}
|
2012-03-21 23:34:00 +00:00
|
|
|
allocated += i;
|
2007-10-16 08:26:19 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* After retaking hugetlb_lock, we need to recalculate 'needed'
|
|
|
|
* because either resv_huge_pages or free_huge_pages may have changed.
|
|
|
|
*/
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2008-07-24 04:27:41 +00:00
|
|
|
needed = (h->resv_huge_pages + delta) -
|
|
|
|
(h->free_huge_pages + allocated);
|
2012-03-21 23:34:00 +00:00
|
|
|
if (needed > 0) {
|
|
|
|
if (alloc_ok)
|
|
|
|
goto retry;
|
|
|
|
/*
|
|
|
|
* We were not able to allocate enough pages to
|
|
|
|
* satisfy the entire reservation so we free what
|
|
|
|
* we've allocated so far.
|
|
|
|
*/
|
|
|
|
goto free;
|
|
|
|
}
|
2007-10-16 08:26:19 +00:00
|
|
|
/*
|
|
|
|
* The surplus_list now contains _at_least_ the number of extra pages
|
2011-03-31 01:57:33 +00:00
|
|
|
* needed to accommodate the reservation. Add the appropriate number
|
2007-10-16 08:26:19 +00:00
|
|
|
* of pages to the hugetlb pool and free the extras back to the buddy
|
2008-03-04 22:29:38 +00:00
|
|
|
* allocator. Commit the entire reservation here to prevent another
|
|
|
|
* process from stealing the pages as they are added to the pool but
|
|
|
|
* before they are reserved.
|
2007-10-16 08:26:19 +00:00
|
|
|
*/
|
|
|
|
needed += allocated;
|
2008-07-24 04:27:41 +00:00
|
|
|
h->resv_huge_pages += delta;
|
2007-10-16 08:26:19 +00:00
|
|
|
ret = 0;
|
2010-09-08 01:19:37 +00:00
|
|
|
|
2008-04-28 09:12:20 +00:00
|
|
|
/* Free the needed pages to the hugetlb pool */
|
2023-08-16 15:11:51 +00:00
|
|
|
list_for_each_entry_safe(folio, tmp, &surplus_list, lru) {
|
2008-04-28 09:12:20 +00:00
|
|
|
if ((--needed) < 0)
|
|
|
|
break;
|
2021-09-02 21:58:47 +00:00
|
|
|
/* Add the page to the hugetlb allocator */
|
2023-08-16 15:11:51 +00:00
|
|
|
enqueue_hugetlb_folio(h, folio);
|
2008-04-28 09:12:20 +00:00
|
|
|
}
|
2012-03-21 23:34:00 +00:00
|
|
|
free:
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2008-04-28 09:12:20 +00:00
|
|
|
|
2021-09-02 21:58:47 +00:00
|
|
|
/*
|
|
|
|
* Free unnecessary surplus pages to the buddy allocator.
|
2023-08-16 15:11:51 +00:00
|
|
|
* Pages have no ref count, call free_huge_folio directly.
|
2021-09-02 21:58:47 +00:00
|
|
|
*/
|
2023-08-16 15:11:51 +00:00
|
|
|
list_for_each_entry_safe(folio, tmp, &surplus_list, lru)
|
|
|
|
free_huge_folio(folio);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2007-10-16 08:26:19 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2017-01-11 00:58:27 +00:00
|
|
|
* This routine has two main purposes:
|
|
|
|
* 1) Decrement the reservation count (resv_huge_pages) by the value passed
|
|
|
|
* in unused_resv_pages. This corresponds to the prior adjustments made
|
|
|
|
* to the associated reservation map.
|
|
|
|
* 2) Free any unused surplus pages that may have been allocated to satisfy
|
|
|
|
* the reservation. As many as unused_resv_pages may be freed.
|
2007-10-16 08:26:19 +00:00
|
|
|
*/
|
2008-07-24 04:27:41 +00:00
|
|
|
static void return_unused_surplus_pages(struct hstate *h,
|
|
|
|
unsigned long unused_resv_pages)
|
2007-10-16 08:26:19 +00:00
|
|
|
{
|
|
|
|
unsigned long nr_pages;
|
2021-05-05 01:35:03 +00:00
|
|
|
LIST_HEAD(page_list);
|
|
|
|
|
2021-05-05 01:35:10 +00:00
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
2021-05-05 01:35:03 +00:00
|
|
|
/* Uncommit the reservation */
|
|
|
|
h->resv_huge_pages -= unused_resv_pages;
|
2007-10-16 08:26:19 +00:00
|
|
|
|
2022-07-14 04:24:13 +00:00
|
|
|
if (hstate_is_gigantic(h) && !gigantic_page_runtime_supported())
|
2017-01-11 00:58:27 +00:00
|
|
|
goto out;
|
2008-07-24 04:27:47 +00:00
|
|
|
|
2017-01-11 00:58:27 +00:00
|
|
|
/*
|
|
|
|
* Part (or even all) of the reservation could have been backed
|
|
|
|
* by pre-allocated pages. Only free surplus pages.
|
|
|
|
*/
|
2008-07-24 04:27:41 +00:00
|
|
|
nr_pages = min(unused_resv_pages, h->surplus_huge_pages);
|
2007-10-16 08:26:19 +00:00
|
|
|
|
2009-09-22 00:01:23 +00:00
|
|
|
/*
|
|
|
|
* We want to release as many surplus pages as possible, spread
|
2009-12-15 01:58:32 +00:00
|
|
|
* evenly across all nodes with memory. Iterate across these nodes
|
|
|
|
* until we can no longer free unreserved surplus pages. This occurs
|
|
|
|
* when the nodes with surplus pages have no free pages.
|
2023-08-24 14:13:25 +00:00
|
|
|
* remove_pool_hugetlb_folio() will balance the freed pages across the
|
2009-12-15 01:58:32 +00:00
|
|
|
* on-line nodes with memory and will handle the hstate accounting.
|
2009-09-22 00:01:23 +00:00
|
|
|
*/
|
|
|
|
while (nr_pages--) {
|
2023-08-24 14:13:25 +00:00
|
|
|
struct folio *folio;
|
|
|
|
|
|
|
|
folio = remove_pool_hugetlb_folio(h, &node_states[N_MEMORY], 1);
|
|
|
|
if (!folio)
|
2017-01-11 00:58:27 +00:00
|
|
|
goto out;
|
2021-05-05 01:35:03 +00:00
|
|
|
|
2023-08-24 14:13:25 +00:00
|
|
|
list_add(&folio->lru, &page_list);
|
2007-10-16 08:26:19 +00:00
|
|
|
}
|
2017-01-11 00:58:27 +00:00
|
|
|
|
|
|
|
out:
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2021-05-05 01:35:03 +00:00
|
|
|
update_and_free_pages_bulk(h, &page_list);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2007-10-16 08:26:19 +00:00
|
|
|
}
|
|
|
|
|
2015-09-08 22:01:28 +00:00
|
|
|
|
2008-07-24 04:27:30 +00:00
|
|
|
/*
|
2015-09-08 22:01:31 +00:00
|
|
|
* vma_needs_reservation, vma_commit_reservation and vma_end_reservation
|
2015-09-08 22:01:28 +00:00
|
|
|
* are used by the huge page allocation routines to manage reservations.
|
2015-06-24 23:57:55 +00:00
|
|
|
*
|
|
|
|
* vma_needs_reservation is called to determine if the huge page at addr
|
|
|
|
* within the vma has an associated reservation. If a reservation is
|
|
|
|
* needed, the value 1 is returned. The caller is then responsible for
|
|
|
|
* managing the global reservation and subpool usage counts. After
|
|
|
|
* the huge page has been allocated, vma_commit_reservation is called
|
2015-09-08 22:01:31 +00:00
|
|
|
* to add the page to the reservation map. If the page allocation fails,
|
|
|
|
* the reservation must be ended instead of committed. vma_end_reservation
|
|
|
|
* is called in such cases.
|
2015-06-24 23:57:55 +00:00
|
|
|
*
|
|
|
|
* In the normal case, vma_commit_reservation returns the same value
|
|
|
|
* as the preceding vma_needs_reservation call. The only time this
|
|
|
|
* is not the case is if a reserve map was changed between calls. It
|
|
|
|
* is the responsibility of the caller to notice the difference and
|
|
|
|
* take appropriate action.
|
2016-11-10 18:46:32 +00:00
|
|
|
*
|
|
|
|
* vma_add_reservation is used in error paths where a reservation must
|
|
|
|
* be restored when a newly allocated huge page must be freed. It is
|
|
|
|
* to be called after calling vma_needs_reservation to determine if a
|
|
|
|
* reservation exists.
|
2021-06-16 01:23:29 +00:00
|
|
|
*
|
|
|
|
* vma_del_reservation is used in error paths where an entry in the reserve
|
|
|
|
* map was created during huge page allocation and must be removed. It is to
|
|
|
|
* be called after calling vma_needs_reservation to determine if a reservation
|
|
|
|
* exists.
|
2008-07-24 04:27:30 +00:00
|
|
|
*/
|
2015-09-08 22:01:28 +00:00
|
|
|
enum vma_resv_mode {
|
|
|
|
VMA_NEEDS_RESV,
|
|
|
|
VMA_COMMIT_RESV,
|
2015-09-08 22:01:31 +00:00
|
|
|
VMA_END_RESV,
|
2016-11-10 18:46:32 +00:00
|
|
|
VMA_ADD_RESV,
|
2021-06-16 01:23:29 +00:00
|
|
|
VMA_DEL_RESV,
|
2015-09-08 22:01:28 +00:00
|
|
|
};
|
2015-06-24 23:57:55 +00:00
|
|
|
static long __vma_reservation_common(struct hstate *h,
|
|
|
|
struct vm_area_struct *vma, unsigned long addr,
|
2015-09-08 22:01:28 +00:00
|
|
|
enum vma_resv_mode mode)
|
2008-07-24 04:27:30 +00:00
|
|
|
{
|
2014-04-03 21:47:30 +00:00
|
|
|
struct resv_map *resv;
|
|
|
|
pgoff_t idx;
|
2015-06-24 23:57:55 +00:00
|
|
|
long ret;
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
long dummy_out_regions_needed;
|
2008-07-24 04:27:30 +00:00
|
|
|
|
2014-04-03 21:47:30 +00:00
|
|
|
resv = vma_resv_map(vma);
|
|
|
|
if (!resv)
|
2008-07-24 04:27:32 +00:00
|
|
|
return 1;
|
2008-07-24 04:27:30 +00:00
|
|
|
|
2014-04-03 21:47:30 +00:00
|
|
|
idx = vma_hugecache_offset(h, vma, addr);
|
2015-09-08 22:01:28 +00:00
|
|
|
switch (mode) {
|
|
|
|
case VMA_NEEDS_RESV:
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
ret = region_chg(resv, idx, idx + 1, &dummy_out_regions_needed);
|
|
|
|
/* We assume that vma_reservation_* routines always operate on
|
|
|
|
* 1 page, and that adding to resv map a 1 page entry can only
|
|
|
|
* ever require 1 region.
|
|
|
|
*/
|
|
|
|
VM_BUG_ON(dummy_out_regions_needed != 1);
|
2015-09-08 22:01:28 +00:00
|
|
|
break;
|
|
|
|
case VMA_COMMIT_RESV:
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
ret = region_add(resv, idx, idx + 1, 1, NULL, NULL);
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
/* region_add calls of range 1 should never fail. */
|
|
|
|
VM_BUG_ON(ret < 0);
|
2015-09-08 22:01:28 +00:00
|
|
|
break;
|
2015-09-08 22:01:31 +00:00
|
|
|
case VMA_END_RESV:
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
region_abort(resv, idx, idx + 1, 1);
|
2015-09-08 22:01:28 +00:00
|
|
|
ret = 0;
|
|
|
|
break;
|
2016-11-10 18:46:32 +00:00
|
|
|
case VMA_ADD_RESV:
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
if (vma->vm_flags & VM_MAYSHARE) {
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
ret = region_add(resv, idx, idx + 1, 1, NULL, NULL);
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
/* region_add calls of range 1 should never fail. */
|
|
|
|
VM_BUG_ON(ret < 0);
|
|
|
|
} else {
|
|
|
|
region_abort(resv, idx, idx + 1, 1);
|
2016-11-10 18:46:32 +00:00
|
|
|
ret = region_del(resv, idx, idx + 1);
|
|
|
|
}
|
|
|
|
break;
|
2021-06-16 01:23:29 +00:00
|
|
|
case VMA_DEL_RESV:
|
|
|
|
if (vma->vm_flags & VM_MAYSHARE) {
|
|
|
|
region_abort(resv, idx, idx + 1, 1);
|
|
|
|
ret = region_del(resv, idx, idx + 1);
|
|
|
|
} else {
|
|
|
|
ret = region_add(resv, idx, idx + 1, 1, NULL, NULL);
|
|
|
|
/* region_add calls of range 1 should never fail. */
|
|
|
|
VM_BUG_ON(ret < 0);
|
|
|
|
}
|
|
|
|
break;
|
2015-09-08 22:01:28 +00:00
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
2008-07-24 04:27:32 +00:00
|
|
|
|
2021-06-16 01:23:29 +00:00
|
|
|
if (vma->vm_flags & VM_MAYSHARE || mode == VMA_DEL_RESV)
|
2015-06-24 23:57:55 +00:00
|
|
|
return ret;
|
2021-05-05 01:34:32 +00:00
|
|
|
/*
|
|
|
|
* We know private mapping must have HPAGE_RESV_OWNER set.
|
|
|
|
*
|
|
|
|
* In most cases, reserves always exist for private mappings.
|
|
|
|
* However, a file associated with mapping could have been
|
|
|
|
* hole punched or truncated after reserves were consumed.
|
|
|
|
* As subsequent fault on such a range will not use reserves.
|
|
|
|
* Subtle - The reserve map for private mappings has the
|
|
|
|
* opposite meaning than that of shared mappings. If NO
|
|
|
|
* entry is in the reserve map, it means a reservation exists.
|
|
|
|
* If an entry exists in the reserve map, it means the
|
|
|
|
* reservation has already been consumed. As a result, the
|
|
|
|
* return value of this routine is the opposite of the
|
|
|
|
* value returned from reserve map manipulation routines above.
|
|
|
|
*/
|
|
|
|
if (ret > 0)
|
|
|
|
return 0;
|
|
|
|
if (ret == 0)
|
|
|
|
return 1;
|
|
|
|
return ret;
|
2008-07-24 04:27:30 +00:00
|
|
|
}
|
2015-06-24 23:57:55 +00:00
|
|
|
|
|
|
|
static long vma_needs_reservation(struct hstate *h,
|
2008-07-24 04:27:41 +00:00
|
|
|
struct vm_area_struct *vma, unsigned long addr)
|
2008-07-24 04:27:30 +00:00
|
|
|
{
|
2015-09-08 22:01:28 +00:00
|
|
|
return __vma_reservation_common(h, vma, addr, VMA_NEEDS_RESV);
|
2015-06-24 23:57:55 +00:00
|
|
|
}
|
2008-07-24 04:27:32 +00:00
|
|
|
|
2015-06-24 23:57:55 +00:00
|
|
|
static long vma_commit_reservation(struct hstate *h,
|
|
|
|
struct vm_area_struct *vma, unsigned long addr)
|
|
|
|
{
|
2015-09-08 22:01:28 +00:00
|
|
|
return __vma_reservation_common(h, vma, addr, VMA_COMMIT_RESV);
|
|
|
|
}
|
|
|
|
|
2015-09-08 22:01:31 +00:00
|
|
|
static void vma_end_reservation(struct hstate *h,
|
2015-09-08 22:01:28 +00:00
|
|
|
struct vm_area_struct *vma, unsigned long addr)
|
|
|
|
{
|
2015-09-08 22:01:31 +00:00
|
|
|
(void)__vma_reservation_common(h, vma, addr, VMA_END_RESV);
|
2008-07-24 04:27:30 +00:00
|
|
|
}
|
|
|
|
|
2016-11-10 18:46:32 +00:00
|
|
|
static long vma_add_reservation(struct hstate *h,
|
|
|
|
struct vm_area_struct *vma, unsigned long addr)
|
|
|
|
{
|
|
|
|
return __vma_reservation_common(h, vma, addr, VMA_ADD_RESV);
|
|
|
|
}
|
|
|
|
|
2021-06-16 01:23:29 +00:00
|
|
|
static long vma_del_reservation(struct hstate *h,
|
|
|
|
struct vm_area_struct *vma, unsigned long addr)
|
|
|
|
{
|
|
|
|
return __vma_reservation_common(h, vma, addr, VMA_DEL_RESV);
|
|
|
|
}
|
|
|
|
|
2016-11-10 18:46:32 +00:00
|
|
|
/*
|
2021-06-16 01:23:29 +00:00
|
|
|
* This routine is called to restore reservation information on error paths.
|
2023-01-25 17:05:33 +00:00
|
|
|
* It should ONLY be called for folios allocated via alloc_hugetlb_folio(),
|
|
|
|
* and the hugetlb mutex should remain held when calling this routine.
|
2021-06-16 01:23:29 +00:00
|
|
|
*
|
|
|
|
* It handles two specific cases:
|
2023-01-25 17:05:34 +00:00
|
|
|
* 1) A reservation was in place and the folio consumed the reservation.
|
|
|
|
* hugetlb_restore_reserve is set in the folio.
|
|
|
|
* 2) No reservation was in place for the page, so hugetlb_restore_reserve is
|
2023-01-25 17:05:33 +00:00
|
|
|
* not set. However, alloc_hugetlb_folio always updates the reserve map.
|
2021-06-16 01:23:29 +00:00
|
|
|
*
|
2023-08-16 15:11:51 +00:00
|
|
|
* In case 1, free_huge_folio later in the error path will increment the
|
|
|
|
* global reserve count. But, free_huge_folio does not have enough context
|
2021-06-16 01:23:29 +00:00
|
|
|
* to adjust the reservation map. This case deals primarily with private
|
|
|
|
* mappings. Adjust the reserve map here to be consistent with global
|
2023-08-16 15:11:51 +00:00
|
|
|
* reserve count adjustments to be made by free_huge_folio. Make sure the
|
2021-06-16 01:23:29 +00:00
|
|
|
* reserve map indicates there is a reservation present.
|
|
|
|
*
|
2023-01-25 17:05:33 +00:00
|
|
|
* In case 2, simply undo reserve map modifications done by alloc_hugetlb_folio.
|
2016-11-10 18:46:32 +00:00
|
|
|
*/
|
2021-06-16 01:23:29 +00:00
|
|
|
void restore_reserve_on_error(struct hstate *h, struct vm_area_struct *vma,
|
2023-01-25 17:05:34 +00:00
|
|
|
unsigned long address, struct folio *folio)
|
2016-11-10 18:46:32 +00:00
|
|
|
{
|
2021-06-16 01:23:29 +00:00
|
|
|
long rc = vma_needs_reservation(h, vma, address);
|
2016-11-10 18:46:32 +00:00
|
|
|
|
2023-01-13 22:30:56 +00:00
|
|
|
if (folio_test_hugetlb_restore_reserve(folio)) {
|
2021-06-16 01:23:29 +00:00
|
|
|
if (unlikely(rc < 0))
|
2016-11-10 18:46:32 +00:00
|
|
|
/*
|
|
|
|
* Rare out of memory condition in reserve map
|
2023-01-13 22:30:56 +00:00
|
|
|
* manipulation. Clear hugetlb_restore_reserve so
|
|
|
|
* that global reserve count will not be incremented
|
2023-08-16 15:11:51 +00:00
|
|
|
* by free_huge_folio. This will make it appear
|
2023-01-13 22:30:56 +00:00
|
|
|
* as though the reservation for this folio was
|
2016-11-10 18:46:32 +00:00
|
|
|
* consumed. This may prevent the task from
|
2023-01-13 22:30:56 +00:00
|
|
|
* faulting in the folio at a later time. This
|
2016-11-10 18:46:32 +00:00
|
|
|
* is better than inconsistent global huge page
|
|
|
|
* accounting of reserve counts.
|
|
|
|
*/
|
2023-01-13 22:30:56 +00:00
|
|
|
folio_clear_hugetlb_restore_reserve(folio);
|
2021-06-16 01:23:29 +00:00
|
|
|
else if (rc)
|
|
|
|
(void)vma_add_reservation(h, vma, address);
|
|
|
|
else
|
|
|
|
vma_end_reservation(h, vma, address);
|
|
|
|
} else {
|
|
|
|
if (!rc) {
|
|
|
|
/*
|
|
|
|
* This indicates there is an entry in the reserve map
|
2023-01-25 17:05:33 +00:00
|
|
|
* not added by alloc_hugetlb_folio. We know it was added
|
|
|
|
* before the alloc_hugetlb_folio call, otherwise
|
2023-01-13 22:30:56 +00:00
|
|
|
* hugetlb_restore_reserve would be set on the folio.
|
2021-06-16 01:23:29 +00:00
|
|
|
* Remove the entry so that a subsequent allocation
|
|
|
|
* does not consume a reservation.
|
|
|
|
*/
|
|
|
|
rc = vma_del_reservation(h, vma, address);
|
|
|
|
if (rc < 0)
|
2016-11-10 18:46:32 +00:00
|
|
|
/*
|
2021-06-16 01:23:29 +00:00
|
|
|
* VERY rare out of memory condition. Since
|
|
|
|
* we can not delete the entry, set
|
2023-01-13 22:30:56 +00:00
|
|
|
* hugetlb_restore_reserve so that the reserve
|
|
|
|
* count will be incremented when the folio
|
2021-06-16 01:23:29 +00:00
|
|
|
* is freed. This reserve will be consumed
|
|
|
|
* on a subsequent allocation.
|
2016-11-10 18:46:32 +00:00
|
|
|
*/
|
2023-01-13 22:30:56 +00:00
|
|
|
folio_set_hugetlb_restore_reserve(folio);
|
2021-06-16 01:23:29 +00:00
|
|
|
} else if (rc < 0) {
|
|
|
|
/*
|
|
|
|
* Rare out of memory condition from
|
|
|
|
* vma_needs_reservation call. Memory allocation is
|
|
|
|
* only attempted if a new entry is needed. Therefore,
|
|
|
|
* this implies there is not an entry in the
|
|
|
|
* reserve map.
|
|
|
|
*
|
|
|
|
* For shared mappings, no entry in the map indicates
|
|
|
|
* no reservation. We are done.
|
|
|
|
*/
|
|
|
|
if (!(vma->vm_flags & VM_MAYSHARE))
|
|
|
|
/*
|
|
|
|
* For private mappings, no entry indicates
|
|
|
|
* a reservation is present. Since we can
|
2023-01-13 22:30:56 +00:00
|
|
|
* not add an entry, set hugetlb_restore_reserve
|
|
|
|
* on the folio so reserve count will be
|
2021-06-16 01:23:29 +00:00
|
|
|
* incremented when freed. This reserve will
|
|
|
|
* be consumed on a subsequent allocation.
|
|
|
|
*/
|
2023-01-13 22:30:56 +00:00
|
|
|
folio_set_hugetlb_restore_reserve(folio);
|
2016-11-10 18:46:32 +00:00
|
|
|
} else
|
2021-06-16 01:23:29 +00:00
|
|
|
/*
|
|
|
|
* No reservation present, do nothing
|
|
|
|
*/
|
|
|
|
vma_end_reservation(h, vma, address);
|
2016-11-10 18:46:32 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
/*
|
2022-11-29 22:50:39 +00:00
|
|
|
* alloc_and_dissolve_hugetlb_folio - Allocate a new folio and dissolve
|
|
|
|
* the old one
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
* @h: struct hstate old page belongs to
|
2022-11-29 22:50:39 +00:00
|
|
|
* @old_folio: Old folio to dissolve
|
2021-05-05 01:35:29 +00:00
|
|
|
* @list: List to isolate the page in case we need to
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
* Returns 0 on success, otherwise negated error.
|
|
|
|
*/
|
2022-11-29 22:50:39 +00:00
|
|
|
static int alloc_and_dissolve_hugetlb_folio(struct hstate *h,
|
|
|
|
struct folio *old_folio, struct list_head *list)
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
{
|
|
|
|
gfp_t gfp_mask = htlb_alloc_mask(h) | __GFP_THISNODE;
|
2022-11-01 22:30:53 +00:00
|
|
|
int nid = folio_nid(old_folio);
|
2024-02-06 03:08:11 +00:00
|
|
|
struct folio *new_folio = NULL;
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
retry:
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2022-11-01 22:30:53 +00:00
|
|
|
if (!folio_test_hugetlb(old_folio)) {
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
/*
|
2022-11-29 22:50:39 +00:00
|
|
|
* Freed from under us. Drop new_folio too.
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
*/
|
|
|
|
goto free_new;
|
2022-11-01 22:30:53 +00:00
|
|
|
} else if (folio_ref_count(old_folio)) {
|
2023-02-15 10:39:36 +00:00
|
|
|
bool isolated;
|
|
|
|
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
/*
|
2022-11-29 22:50:39 +00:00
|
|
|
* Someone has grabbed the folio, try to isolate it here.
|
2021-05-05 01:35:29 +00:00
|
|
|
* Fail with -EBUSY if not possible.
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
*/
|
2021-05-05 01:35:29 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2023-02-15 10:39:36 +00:00
|
|
|
isolated = isolate_hugetlb(old_folio, list);
|
|
|
|
ret = isolated ? 0 : -EBUSY;
|
2021-05-05 01:35:29 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
goto free_new;
|
2022-11-01 22:30:53 +00:00
|
|
|
} else if (!folio_test_hugetlb_freed(old_folio)) {
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
/*
|
2022-11-29 22:50:39 +00:00
|
|
|
* Folio's refcount is 0 but it has not been enqueued in the
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
* freelist yet. Race window is small, so we can succeed here if
|
|
|
|
* we retry.
|
|
|
|
*/
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
cond_resched();
|
|
|
|
goto retry;
|
|
|
|
} else {
|
2024-02-06 03:08:11 +00:00
|
|
|
if (!new_folio) {
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
new_folio = alloc_buddy_hugetlb_folio(h, gfp_mask, nid,
|
|
|
|
NULL, NULL);
|
|
|
|
if (!new_folio)
|
|
|
|
return -ENOMEM;
|
|
|
|
__prep_new_hugetlb_folio(h, new_folio);
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
/*
|
2022-11-29 22:50:39 +00:00
|
|
|
* Ok, old_folio is still a genuine free hugepage. Remove it from
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
* the freelist and decrease the counters. These will be
|
|
|
|
* incremented again when calling __prep_account_new_huge_page()
|
2022-11-29 22:50:36 +00:00
|
|
|
* and enqueue_hugetlb_folio() for new_folio. The counters will
|
|
|
|
* remain stable since this happens under the lock.
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
*/
|
2022-11-29 22:50:33 +00:00
|
|
|
remove_hugetlb_folio(h, old_folio, false);
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
|
|
|
|
/*
|
2022-11-29 22:50:39 +00:00
|
|
|
* Ref count on new_folio is already zero as it was dropped
|
2021-09-02 21:58:47 +00:00
|
|
|
* earlier. It can be directly added to the pool free list.
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
*/
|
|
|
|
__prep_account_new_huge_page(h, nid);
|
2022-11-29 22:50:36 +00:00
|
|
|
enqueue_hugetlb_folio(h, new_folio);
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
|
|
|
|
/*
|
2022-11-29 22:50:39 +00:00
|
|
|
* Folio has been replaced, we can safely free the old one.
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
*/
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2022-11-29 22:50:34 +00:00
|
|
|
update_and_free_hugetlb_folio(h, old_folio, false);
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
free_new:
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
While investigating HVO for THPs [1], it turns out that speculative PFN
walkers like compaction can race with vmemmap modifications, e.g.,
CPU 1 (vmemmap modifier) CPU 2 (speculative PFN walker)
------------------------------- ------------------------------
Allocates an LRU folio page1
Sees page1
Frees page1
Allocates a hugeTLB folio page2
(page1 being a tail of page2)
Updates vmemmap mapping page1
get_page_unless_zero(page1)
Even though page1->_refcount is zero after HVO, get_page_unless_zero() can
still try to modify this read-only field, resulting in a crash.
An independent report [2] confirmed this race.
There are two discussed approaches to fix this race:
1. Make RO vmemmap RW so that get_page_unless_zero() can fail without
triggering a PF.
2. Use RCU to make sure get_page_unless_zero() either sees zero
page->_refcount through the old vmemmap or non-zero page->_refcount
through the new one.
The second approach is preferred here because:
1. It can prevent illegal modifications to struct page[] that has been
HVO'ed;
2. It can be generalized, in a way similar to ZERO_PAGE(), to fix
similar races in other places, e.g., arch_remove_memory() on x86
[3], which frees vmemmap mapping offlined struct page[].
While adding synchronize_rcu(), the goal is to be surgical, rather than
optimized. Specifically, calls to synchronize_rcu() on the error handling
paths can be coalesced, but it is not done for the sake of Simplicity:
noticeably, this fix removes ~50% more lines than it adds.
According to the hugetlb_optimize_vmemmap section in
Documentation/admin-guide/sysctl/vm.rst, enabling HVO makes allocating or
freeing hugeTLB pages "~2x slower than before". Having synchronize_rcu()
on top makes those operations even worse, and this also affects the user
interface /proc/sys/vm/nr_overcommit_hugepages.
This is *very* hard to trigger:
1. Most hugeTLB use cases I know of are static, i.e., reserved at
boot time, because allocating at runtime is not reliable at all.
2. On top of that, someone has to be very unlucky to get tripped
over above, because the race window is so small -- I wasn't able to
trigger it with a stress testing that does nothing but that (with
THPs though).
[1] https://lore.kernel.org/20240229183436.4110845-4-yuzhao@google.com/
[2] https://lore.kernel.org/917FFC7F-0615-44DD-90EE-9F85F8EA9974@linux.dev/
[3] https://lore.kernel.org/be130a96-a27e-4240-ad78-776802f57cad@redhat.com/
Link: https://lkml.kernel.org/r/20240627222705.2974207-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-27 22:27:05 +00:00
|
|
|
if (new_folio)
|
2024-02-06 03:08:11 +00:00
|
|
|
update_and_free_hugetlb_folio(h, new_folio, false);
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2021-05-05 01:35:29 +00:00
|
|
|
int isolate_or_dissolve_huge_page(struct page *page, struct list_head *list)
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
{
|
|
|
|
struct hstate *h;
|
2022-11-01 22:30:55 +00:00
|
|
|
struct folio *folio = page_folio(page);
|
2021-05-05 01:35:29 +00:00
|
|
|
int ret = -EBUSY;
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* The page might have been dissolved from under our feet, so make sure
|
|
|
|
* to carefully check the state under the lock.
|
|
|
|
* Return success when racing as if we dissolved the page ourselves.
|
|
|
|
*/
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2022-11-01 22:30:55 +00:00
|
|
|
if (folio_test_hugetlb(folio)) {
|
|
|
|
h = folio_hstate(folio);
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
} else {
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Fence off gigantic pages as there is a cyclic dependency between
|
|
|
|
* alloc_contig_range and them. Return -ENOMEM as this has the effect
|
|
|
|
* of bailing out right away without further retrying.
|
|
|
|
*/
|
|
|
|
if (hstate_is_gigantic(h))
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2023-02-15 10:39:36 +00:00
|
|
|
if (folio_ref_count(folio) && isolate_hugetlb(folio, list))
|
2021-05-05 01:35:29 +00:00
|
|
|
ret = 0;
|
2022-11-01 22:30:55 +00:00
|
|
|
else if (!folio_ref_count(folio))
|
2022-11-29 22:50:39 +00:00
|
|
|
ret = alloc_and_dissolve_hugetlb_folio(h, folio, list);
|
2021-05-05 01:35:29 +00:00
|
|
|
|
|
|
|
return ret;
|
mm: make alloc_contig_range handle free hugetlb pages
alloc_contig_range will fail if it ever sees a HugeTLB page within the
range we are trying to allocate, even when that page is free and can be
easily reallocated.
This has proved to be problematic for some users of alloc_contic_range,
e.g: CMA and virtio-mem, where those would fail the call even when those
pages lay in ZONE_MOVABLE and are free.
We can do better by trying to replace such page.
Free hugepages are tricky to handle so as to no userspace application
notices disruption, we need to replace the current free hugepage with a
new one.
In order to do that, a new function called alloc_and_dissolve_huge_page is
introduced. This function will first try to get a new fresh hugepage, and
if it succeeds, it will replace the old one in the free hugepage pool.
The free page replacement is done under hugetlb_lock, so no external users
of hugetlb will notice the change. To allocate the new huge page, we use
alloc_buddy_huge_page(), so we do not have to deal with any counters, and
prep_new_huge_page() is not called. This is valulable because in case we
need to free the new page, we only need to call __free_pages().
Once we know that the page to be replaced is a genuine 0-refcounted huge
page, we remove the old page from the freelist by remove_hugetlb_page().
Then, we can call __prep_new_huge_page() and
__prep_account_new_huge_page() for the new huge page to properly
initialize it and increment the hstate->nr_huge_pages counter (previously
decremented by remove_hugetlb_page()). Once done, the page is enqueued by
enqueue_huge_page() and it is ready to be used.
There is one tricky case when page's refcount is 0 because it is in the
process of being released. A missing PageHugeFreed bit will tell us that
freeing is in flight so we retry after dropping the hugetlb_lock. The
race window should be small and the next retry should make a forward
progress.
E.g:
CPU0 CPU1
free_huge_page() isolate_or_dissolve_huge_page
PageHuge() == T
alloc_and_dissolve_huge_page
alloc_buddy_huge_page()
spin_lock_irq(hugetlb_lock)
// PageHuge() && !PageHugeFreed &&
// !PageCount()
spin_unlock_irq(hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) update_and_free_page
PageHuge() == F
__free_pages()
2) enqueue_huge_page
SetPageHugeFreed()
spin_unlock_irq(&hugetlb_lock)
spin_lock_irq(hugetlb_lock)
1) PageHuge() == F (freed by case#1 from CPU0)
2) PageHuge() == T
PageHugeFreed() == T
- proceed with replacing the page
In the case above we retry as the window race is quite small and we have
high chances to succeed next time.
With regard to the allocation, we restrict it to the node the page belongs
to with __GFP_THISNODE, meaning we do not fallback on other node's zones.
Note that gigantic hugetlb pages are fenced off since there is a cyclic
dependency between them and alloc_contig_range.
Link: https://lkml.kernel.org/r/20210419075413.1064-6-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:26 +00:00
|
|
|
}
|
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
struct folio *alloc_hugetlb_folio(struct vm_area_struct *vma,
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
unsigned long addr, int avoid_reserve)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
struct hugepage_subpool *spool = subpool_vma(vma);
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = hstate_vma(vma);
|
2022-11-01 22:30:57 +00:00
|
|
|
struct folio *folio;
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
long map_chg, map_commit, nr_pages = pages_per_huge_page(h);
|
2015-09-08 22:01:47 +00:00
|
|
|
long gbl_chg;
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
int memcg_charge_ret, ret, idx;
|
2023-01-25 17:05:33 +00:00
|
|
|
struct hugetlb_cgroup *h_cg = NULL;
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
struct mem_cgroup *memcg;
|
2020-04-02 04:11:31 +00:00
|
|
|
bool deferred_reserve;
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
gfp_t gfp = htlb_alloc_mask(h) | __GFP_RETRY_MAYFAIL;
|
|
|
|
|
|
|
|
memcg = get_mem_cgroup_from_current();
|
|
|
|
memcg_charge_ret = mem_cgroup_hugetlb_try_charge(memcg, gfp, nr_pages);
|
|
|
|
if (memcg_charge_ret == -ENOMEM) {
|
|
|
|
mem_cgroup_put(memcg);
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
}
|
2008-07-24 04:27:23 +00:00
|
|
|
|
2012-07-31 23:42:18 +00:00
|
|
|
idx = hstate_index(h);
|
2008-07-24 04:27:23 +00:00
|
|
|
/*
|
2015-09-08 22:01:47 +00:00
|
|
|
* Examine the region/reserve map to determine if the process
|
|
|
|
* has a reservation for the page to be allocated. A return
|
|
|
|
* code of zero indicates a reservation exists (no change).
|
2008-07-24 04:27:23 +00:00
|
|
|
*/
|
2015-09-08 22:01:47 +00:00
|
|
|
map_chg = gbl_chg = vma_needs_reservation(h, vma, addr);
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
if (map_chg < 0) {
|
|
|
|
if (!memcg_charge_ret)
|
|
|
|
mem_cgroup_cancel_charge(memcg, nr_pages);
|
|
|
|
mem_cgroup_put(memcg);
|
2012-07-31 23:41:57 +00:00
|
|
|
return ERR_PTR(-ENOMEM);
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
}
|
2015-09-08 22:01:47 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Processes that did not create the mapping will have no
|
|
|
|
* reserves as indicated by the region/reserve map. Check
|
|
|
|
* that the allocation will not exceed the subpool limit.
|
|
|
|
* Allocations for MAP_NORESERVE mappings also need to be
|
|
|
|
* checked against any subpool limit.
|
|
|
|
*/
|
|
|
|
if (map_chg || avoid_reserve) {
|
|
|
|
gbl_chg = hugepage_subpool_get_pages(spool, 1);
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
if (gbl_chg < 0)
|
|
|
|
goto out_end_reservation;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2015-09-08 22:01:47 +00:00
|
|
|
/*
|
|
|
|
* Even though there was no reservation in the region/reserve
|
|
|
|
* map, there could be reservations associated with the
|
|
|
|
* subpool that can be used. This would be indicated if the
|
|
|
|
* return value of hugepage_subpool_get_pages() is zero.
|
|
|
|
* However, if avoid_reserve is specified we still avoid even
|
|
|
|
* the subpool reservations.
|
|
|
|
*/
|
|
|
|
if (avoid_reserve)
|
|
|
|
gbl_chg = 1;
|
|
|
|
}
|
|
|
|
|
2020-04-02 04:11:31 +00:00
|
|
|
/* If this allocation is not consuming a reservation, charge it now.
|
|
|
|
*/
|
2021-05-05 01:33:16 +00:00
|
|
|
deferred_reserve = map_chg || avoid_reserve;
|
2020-04-02 04:11:31 +00:00
|
|
|
if (deferred_reserve) {
|
|
|
|
ret = hugetlb_cgroup_charge_cgroup_rsvd(
|
|
|
|
idx, pages_per_huge_page(h), &h_cg);
|
|
|
|
if (ret)
|
|
|
|
goto out_subpool_put;
|
|
|
|
}
|
|
|
|
|
2012-07-31 23:42:18 +00:00
|
|
|
ret = hugetlb_cgroup_charge_cgroup(idx, pages_per_huge_page(h), &h_cg);
|
2014-06-04 23:10:36 +00:00
|
|
|
if (ret)
|
2020-04-02 04:11:31 +00:00
|
|
|
goto out_uncharge_cgroup_reservation;
|
2014-06-04 23:10:36 +00:00
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2015-09-08 22:01:47 +00:00
|
|
|
/*
|
|
|
|
* glb_chg is passed to indicate whether or not a page must be taken
|
|
|
|
* from the global free pool (global change). gbl_chg == 0 indicates
|
|
|
|
* a reservation exists for the allocation.
|
|
|
|
*/
|
2023-01-13 22:30:54 +00:00
|
|
|
folio = dequeue_hugetlb_folio_vma(h, vma, addr, avoid_reserve, gbl_chg);
|
|
|
|
if (!folio) {
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2023-01-13 22:30:54 +00:00
|
|
|
folio = alloc_buddy_hugetlb_folio_with_mpol(h, vma, addr);
|
|
|
|
if (!folio)
|
2014-06-04 23:10:36 +00:00
|
|
|
goto out_uncharge_cgroup;
|
2022-10-18 00:25:05 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
When dequeue_huge_page_vma() in alloc_huge_page() fails, we fall back on
alloc_buddy_huge_page() to directly create a hugepage from the buddy
allocator.
In that case, however, if alloc_buddy_huge_page() succeeds we don't
decrement h->resv_huge_pages, which means that successful
hugetlb_fault() returns without releasing the reserve count. As a
result, subsequent hugetlb_fault() might fail despite that there are
still free hugepages.
This patch simply adds decrementing code on that code path.
I reproduced this problem when testing v4.3 kernel in the following situation:
- the test machine/VM is a NUMA system,
- hugepage overcommiting is enabled,
- most of hugepages are allocated and there's only one free hugepage
which is on node 0 (for example),
- another program, which calls set_mempolicy(MPOL_BIND) to bind itself to
node 1, tries to allocate a hugepage,
- the allocation should fail but the reserve count is still hold.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org> [3.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-11 21:40:24 +00:00
|
|
|
if (!avoid_reserve && vma_has_reserves(vma, gbl_chg)) {
|
2023-01-13 22:30:54 +00:00
|
|
|
folio_set_hugetlb_restore_reserve(folio);
|
mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
When dequeue_huge_page_vma() in alloc_huge_page() fails, we fall back on
alloc_buddy_huge_page() to directly create a hugepage from the buddy
allocator.
In that case, however, if alloc_buddy_huge_page() succeeds we don't
decrement h->resv_huge_pages, which means that successful
hugetlb_fault() returns without releasing the reserve count. As a
result, subsequent hugetlb_fault() might fail despite that there are
still free hugepages.
This patch simply adds decrementing code on that code path.
I reproduced this problem when testing v4.3 kernel in the following situation:
- the test machine/VM is a NUMA system,
- hugepage overcommiting is enabled,
- most of hugepages are allocated and there's only one free hugepage
which is on node 0 (for example),
- another program, which calls set_mempolicy(MPOL_BIND) to bind itself to
node 1, tries to allocate a hugepage,
- the allocation should fail but the reserve count is still hold.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org> [3.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-11 21:40:24 +00:00
|
|
|
h->resv_huge_pages--;
|
|
|
|
}
|
2023-01-13 22:30:54 +00:00
|
|
|
list_add(&folio->lru, &h->hugepage_activelist);
|
|
|
|
folio_ref_unfreeze(folio, 1);
|
2013-09-11 21:20:58 +00:00
|
|
|
/* Fall through */
|
2008-01-14 08:55:19 +00:00
|
|
|
}
|
2023-01-13 22:30:54 +00:00
|
|
|
|
|
|
|
hugetlb_cgroup_commit_charge(idx, pages_per_huge_page(h), h_cg, folio);
|
2020-04-02 04:11:31 +00:00
|
|
|
/* If allocation is not consuming a reservation, also store the
|
|
|
|
* hugetlb_cgroup pointer on the page.
|
|
|
|
*/
|
|
|
|
if (deferred_reserve) {
|
|
|
|
hugetlb_cgroup_commit_charge_rsvd(idx, pages_per_huge_page(h),
|
2023-01-13 22:30:54 +00:00
|
|
|
h_cg, folio);
|
2020-04-02 04:11:31 +00:00
|
|
|
}
|
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2007-11-15 00:59:37 +00:00
|
|
|
|
2023-01-13 22:30:54 +00:00
|
|
|
hugetlb_set_folio_subpool(folio, spool);
|
2007-11-15 00:59:42 +00:00
|
|
|
|
2015-09-08 22:01:47 +00:00
|
|
|
map_commit = vma_commit_reservation(h, vma, addr);
|
|
|
|
if (unlikely(map_chg > map_commit)) {
|
2015-06-24 23:57:58 +00:00
|
|
|
/*
|
|
|
|
* The page was added to the reservation map between
|
|
|
|
* vma_needs_reservation and vma_commit_reservation.
|
|
|
|
* This indicates a race with hugetlb_reserve_pages.
|
|
|
|
* Adjust for the subpool count incremented above AND
|
|
|
|
* in hugetlb_reserve_pages for the same page. Also,
|
|
|
|
* the reservation count added in hugetlb_reserve_pages
|
|
|
|
* no longer applies.
|
|
|
|
*/
|
|
|
|
long rsv_adjust;
|
|
|
|
|
|
|
|
rsv_adjust = hugepage_subpool_put_pages(spool, 1);
|
|
|
|
hugetlb_acct_memory(h, -rsv_adjust);
|
2024-04-17 21:18:35 +00:00
|
|
|
if (deferred_reserve) {
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2022-11-01 22:30:57 +00:00
|
|
|
hugetlb_cgroup_uncharge_folio_rsvd(hstate_index(h),
|
|
|
|
pages_per_huge_page(h), folio);
|
2024-04-17 21:18:35 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
}
|
2015-06-24 23:57:58 +00:00
|
|
|
}
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
|
|
|
|
if (!memcg_charge_ret)
|
|
|
|
mem_cgroup_commit_charge(folio, memcg);
|
|
|
|
mem_cgroup_put(memcg);
|
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
return folio;
|
2014-06-04 23:10:36 +00:00
|
|
|
|
|
|
|
out_uncharge_cgroup:
|
|
|
|
hugetlb_cgroup_uncharge_cgroup(idx, pages_per_huge_page(h), h_cg);
|
2020-04-02 04:11:31 +00:00
|
|
|
out_uncharge_cgroup_reservation:
|
|
|
|
if (deferred_reserve)
|
|
|
|
hugetlb_cgroup_uncharge_cgroup_rsvd(idx, pages_per_huge_page(h),
|
|
|
|
h_cg);
|
2014-06-04 23:10:36 +00:00
|
|
|
out_subpool_put:
|
2015-09-08 22:01:47 +00:00
|
|
|
if (map_chg || avoid_reserve)
|
2014-06-04 23:10:36 +00:00
|
|
|
hugepage_subpool_put_pages(spool, 1);
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
out_end_reservation:
|
2015-09-08 22:01:31 +00:00
|
|
|
vma_end_reservation(h, vma, addr);
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
|
|
|
if (!memcg_charge_ret)
|
|
|
|
mem_cgroup_cancel_charge(memcg, nr_pages);
|
|
|
|
mem_cgroup_put(memcg);
|
2014-06-04 23:10:36 +00:00
|
|
|
return ERR_PTR(-ENOSPC);
|
[PATCH] hugepage: Strict page reservation for hugepage inodes
These days, hugepages are demand-allocated at first fault time. There's a
somewhat dubious (and racy) heuristic when making a new mmap() to check if
there are enough available hugepages to fully satisfy that mapping.
A particularly obvious case where the heuristic breaks down is where a
process maps its hugepages not as a single chunk, but as a bunch of
individually mmap()ed (or shmat()ed) blocks without touching and
instantiating the pages in between allocations. In this case the size of
each block is compared against the total number of available hugepages.
It's thus easy for the process to become overcommitted, because each block
mapping will succeed, although the total number of hugepages required by
all blocks exceeds the number available. In particular, this defeats such
a program which will detect a mapping failure and adjust its hugepage usage
downward accordingly.
The patch below addresses this problem, by strictly reserving a number of
physical hugepages for hugepage inodes which have been mapped, but not
instatiated. MAP_SHARED mappings are thus "safe" - they will fail on
mmap(), not later with an OOM SIGKILL. MAP_PRIVATE mappings can still
trigger an OOM. (Actually SHARED mappings can technically still OOM, but
only if the sysadmin explicitly reduces the hugepage pool between mapping
and instantiation)
This patch appears to address the problem at hand - it allows DB2 to start
correctly, for instance, which previously suffered the failure described
above.
This patch causes no regressions on the libhugetblfs testsuite, and makes a
test (designed to catch this problem) pass which previously failed (ppc64,
POWER5).
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 08:08:55 +00:00
|
|
|
}
|
|
|
|
|
2021-11-05 20:43:28 +00:00
|
|
|
int alloc_bootmem_huge_page(struct hstate *h, int nid)
|
2017-07-28 05:01:25 +00:00
|
|
|
__attribute__ ((weak, alias("__alloc_bootmem_huge_page")));
|
2021-11-05 20:43:28 +00:00
|
|
|
int __alloc_bootmem_huge_page(struct hstate *h, int nid)
|
2008-07-24 04:27:47 +00:00
|
|
|
{
|
2021-11-05 20:43:28 +00:00
|
|
|
struct huge_bootmem_page *m = NULL; /* initialize for clang */
|
2024-02-22 14:04:21 +00:00
|
|
|
int nr_nodes, node = nid;
|
2008-07-24 04:27:47 +00:00
|
|
|
|
2021-11-05 20:43:28 +00:00
|
|
|
/* do node specific alloc */
|
|
|
|
if (nid != NUMA_NO_NODE) {
|
|
|
|
m = memblock_alloc_try_nid_raw(huge_page_size(h), huge_page_size(h),
|
|
|
|
0, MEMBLOCK_ALLOC_ACCESSIBLE, nid);
|
|
|
|
if (!m)
|
|
|
|
return 0;
|
|
|
|
goto found;
|
|
|
|
}
|
|
|
|
/* allocate from next node when distributing huge pages */
|
2024-02-22 14:04:16 +00:00
|
|
|
for_each_node_mask_to_alloc(&h->next_nid_to_alloc, nr_nodes, node, &node_states[N_MEMORY]) {
|
2021-11-05 20:43:28 +00:00
|
|
|
m = memblock_alloc_try_nid_raw(
|
2014-01-21 23:50:36 +00:00
|
|
|
huge_page_size(h), huge_page_size(h),
|
2018-10-30 22:09:44 +00:00
|
|
|
0, MEMBLOCK_ALLOC_ACCESSIBLE, node);
|
2021-11-05 20:43:28 +00:00
|
|
|
/*
|
|
|
|
* Use the beginning of the huge page to store the
|
|
|
|
* huge_bootmem_page struct (until gather_bootmem
|
|
|
|
* puts them into the mem_map).
|
|
|
|
*/
|
|
|
|
if (!m)
|
|
|
|
return 0;
|
|
|
|
goto found;
|
2008-07-24 04:27:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
found:
|
2023-09-13 10:54:01 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Only initialize the head struct page in memmap_init_reserved_pages,
|
|
|
|
* rest of the struct pages will be initialized by the HugeTLB
|
|
|
|
* subsystem itself.
|
|
|
|
* The head struct page is used to get folio information by the HugeTLB
|
|
|
|
* subsystem like zone id and node id.
|
|
|
|
*/
|
|
|
|
memblock_reserved_mark_noinit(virt_to_phys((void *)m + PAGE_SIZE),
|
|
|
|
huge_page_size(h) - PAGE_SIZE);
|
2008-07-24 04:27:47 +00:00
|
|
|
/* Put them into a private list first because mem_map is not up yet */
|
2018-08-17 22:49:17 +00:00
|
|
|
INIT_LIST_HEAD(&m->list);
|
2024-02-22 14:04:21 +00:00
|
|
|
list_add(&m->list, &huge_boot_pages[node]);
|
2008-07-24 04:27:47 +00:00
|
|
|
m->hstate = h;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2023-09-13 10:54:01 +00:00
|
|
|
/* Initialize [start_page:end_page_number] tail struct pages of a hugepage */
|
|
|
|
static void __init hugetlb_folio_init_tail_vmemmap(struct folio *folio,
|
|
|
|
unsigned long start_page_number,
|
|
|
|
unsigned long end_page_number)
|
|
|
|
{
|
|
|
|
enum zone_type zone = zone_idx(folio_zone(folio));
|
|
|
|
int nid = folio_nid(folio);
|
|
|
|
unsigned long head_pfn = folio_pfn(folio);
|
|
|
|
unsigned long pfn, end_pfn = head_pfn + end_page_number;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
for (pfn = head_pfn + start_page_number; pfn < end_pfn; pfn++) {
|
|
|
|
struct page *page = pfn_to_page(pfn);
|
|
|
|
|
|
|
|
__init_single_page(page, pfn, zone, nid);
|
|
|
|
prep_compound_tail((struct page *)folio, pfn - head_pfn);
|
|
|
|
ret = page_ref_freeze(page, 1);
|
|
|
|
VM_BUG_ON(!ret);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init hugetlb_folio_init_vmemmap(struct folio *folio,
|
|
|
|
struct hstate *h,
|
|
|
|
unsigned long nr_pages)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Prepare folio head */
|
|
|
|
__folio_clear_reserved(folio);
|
|
|
|
__folio_set_head(folio);
|
2023-09-26 17:44:33 +00:00
|
|
|
ret = folio_ref_freeze(folio, 1);
|
2023-09-13 10:54:01 +00:00
|
|
|
VM_BUG_ON(!ret);
|
|
|
|
/* Initialize the necessary tail struct pages */
|
|
|
|
hugetlb_folio_init_tail_vmemmap(folio, 1, nr_pages);
|
|
|
|
prep_compound_head((struct page *)folio, huge_page_order(h));
|
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:05 +00:00
|
|
|
static void __init prep_and_add_bootmem_folios(struct hstate *h,
|
|
|
|
struct list_head *folio_list)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
struct folio *folio, *tmp_f;
|
|
|
|
|
|
|
|
/* Send list for bulk vmemmap optimization processing */
|
|
|
|
hugetlb_vmemmap_optimize_folios(h, folio_list);
|
|
|
|
|
|
|
|
list_for_each_entry_safe(folio, tmp_f, folio_list, lru) {
|
|
|
|
if (!folio_test_hugetlb_vmemmap_optimized(folio)) {
|
|
|
|
/*
|
|
|
|
* If HVO fails, initialize all tail struct pages
|
|
|
|
* We do not worry about potential long lock hold
|
|
|
|
* time as this is early in boot and there should
|
|
|
|
* be no contention.
|
|
|
|
*/
|
|
|
|
hugetlb_folio_init_tail_vmemmap(folio,
|
|
|
|
HUGETLB_VMEMMAP_RESERVE_PAGES,
|
|
|
|
pages_per_huge_page(h));
|
|
|
|
}
|
2024-02-22 14:04:21 +00:00
|
|
|
/* Subdivide locks to achieve better parallel performance */
|
|
|
|
spin_lock_irqsave(&hugetlb_lock, flags);
|
2023-10-19 02:31:05 +00:00
|
|
|
__prep_account_new_huge_page(h, folio_nid(folio));
|
|
|
|
enqueue_hugetlb_folio(h, folio);
|
2024-02-22 14:04:21 +00:00
|
|
|
spin_unlock_irqrestore(&hugetlb_lock, flags);
|
2023-10-19 02:31:05 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2021-07-01 01:48:31 +00:00
|
|
|
/*
|
|
|
|
* Put bootmem huge pages into the standard lists after mem_map is up.
|
2023-12-28 14:47:04 +00:00
|
|
|
* Note: This only applies to gigantic (order > MAX_PAGE_ORDER) pages.
|
2021-07-01 01:48:31 +00:00
|
|
|
*/
|
2024-02-22 14:04:21 +00:00
|
|
|
static void __init gather_bootmem_prealloc_node(unsigned long nid)
|
2008-07-24 04:27:47 +00:00
|
|
|
{
|
2023-10-19 02:31:04 +00:00
|
|
|
LIST_HEAD(folio_list);
|
2008-07-24 04:27:47 +00:00
|
|
|
struct huge_bootmem_page *m;
|
2023-10-19 02:31:04 +00:00
|
|
|
struct hstate *h = NULL, *prev_h = NULL;
|
2008-07-24 04:27:47 +00:00
|
|
|
|
2024-02-22 14:04:21 +00:00
|
|
|
list_for_each_entry(m, &huge_boot_pages[nid], list) {
|
2018-08-17 22:49:07 +00:00
|
|
|
struct page *page = virt_to_page(m);
|
2023-09-13 10:54:01 +00:00
|
|
|
struct folio *folio = (void *)page;
|
2023-10-19 02:31:04 +00:00
|
|
|
|
|
|
|
h = m->hstate;
|
|
|
|
/*
|
|
|
|
* It is possible to have multiple huge page sizes (hstates)
|
|
|
|
* in this list. If so, process each size separately.
|
|
|
|
*/
|
|
|
|
if (h != prev_h && prev_h != NULL)
|
2023-10-19 02:31:05 +00:00
|
|
|
prep_and_add_bootmem_folios(prev_h, &folio_list);
|
2023-10-19 02:31:04 +00:00
|
|
|
prev_h = h;
|
2011-07-26 00:11:50 +00:00
|
|
|
|
2021-07-01 01:48:31 +00:00
|
|
|
VM_BUG_ON(!hstate_is_gigantic(h));
|
2022-11-29 22:50:38 +00:00
|
|
|
WARN_ON(folio_ref_count(folio) != 1);
|
2023-09-13 10:54:01 +00:00
|
|
|
|
|
|
|
hugetlb_folio_init_vmemmap(folio, h,
|
|
|
|
HUGETLB_VMEMMAP_RESERVE_PAGES);
|
2023-10-19 02:31:05 +00:00
|
|
|
init_new_hugetlb_folio(h, folio);
|
2023-10-19 02:31:04 +00:00
|
|
|
list_add(&folio->lru, &folio_list);
|
2018-02-01 00:20:41 +00:00
|
|
|
|
mm: fix negative commitlimit when gigantic hugepages are allocated
When 1GB hugepages are allocated on a system, free(1) reports less
available memory than what really is installed in the box. Also, if the
total size of hugepages allocated on a system is over half of the total
memory size, CommitLimit becomes a negative number.
The problem is that gigantic hugepages (order > MAX_ORDER) can only be
allocated at boot with bootmem, thus its frames are not accounted to
'totalram_pages'. However, they are accounted to hugetlb_total_pages()
What happens to turn CommitLimit into a negative number is this
calculation, in fs/proc/meminfo.c:
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100) + total_swap_pages;
A similar calculation occurs in __vm_enough_memory() in mm/mmap.c.
Also, every vm statistic which depends on 'totalram_pages' will render
confusing values, as if system were 'missing' some part of its memory.
Impact of this bug:
When gigantic hugepages are allocated and sysctl_overcommit_memory ==
OVERCOMMIT_NEVER. In a such situation, __vm_enough_memory() goes through
the mentioned 'allowed' calculation and might end up mistakenly returning
-ENOMEM, thus forcing the system to start reclaiming pages earlier than it
would be ususal, and this could cause detrimental impact to overall
system's performance, depending on the workload.
Besides the aforementioned scenario, I can only think of this causing
annoyances with memory reports from /proc/meminfo and free(1).
[akpm@linux-foundation.org: standardize comment layout]
Reported-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Rafael Aquini <aquini@linux.com>
Acked-by: Russ Anderson <rja@sgi.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 22:08:39 +00:00
|
|
|
/*
|
2021-07-01 01:48:31 +00:00
|
|
|
* We need to restore the 'stolen' pages to totalram_pages
|
|
|
|
* in order to fix confusing memory reports from free(1) and
|
|
|
|
* other side-effects, like CommitLimit going negative.
|
mm: fix negative commitlimit when gigantic hugepages are allocated
When 1GB hugepages are allocated on a system, free(1) reports less
available memory than what really is installed in the box. Also, if the
total size of hugepages allocated on a system is over half of the total
memory size, CommitLimit becomes a negative number.
The problem is that gigantic hugepages (order > MAX_ORDER) can only be
allocated at boot with bootmem, thus its frames are not accounted to
'totalram_pages'. However, they are accounted to hugetlb_total_pages()
What happens to turn CommitLimit into a negative number is this
calculation, in fs/proc/meminfo.c:
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100) + total_swap_pages;
A similar calculation occurs in __vm_enough_memory() in mm/mmap.c.
Also, every vm statistic which depends on 'totalram_pages' will render
confusing values, as if system were 'missing' some part of its memory.
Impact of this bug:
When gigantic hugepages are allocated and sysctl_overcommit_memory ==
OVERCOMMIT_NEVER. In a such situation, __vm_enough_memory() goes through
the mentioned 'allowed' calculation and might end up mistakenly returning
-ENOMEM, thus forcing the system to start reclaiming pages earlier than it
would be ususal, and this could cause detrimental impact to overall
system's performance, depending on the workload.
Besides the aforementioned scenario, I can only think of this causing
annoyances with memory reports from /proc/meminfo and free(1).
[akpm@linux-foundation.org: standardize comment layout]
Reported-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Rafael Aquini <aquini@linux.com>
Acked-by: Russ Anderson <rja@sgi.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 22:08:39 +00:00
|
|
|
*/
|
2021-07-01 01:48:31 +00:00
|
|
|
adjust_managed_page_count(page, pages_per_huge_page(h));
|
2018-07-04 00:02:43 +00:00
|
|
|
cond_resched();
|
2008-07-24 04:27:47 +00:00
|
|
|
}
|
2023-10-19 02:31:04 +00:00
|
|
|
|
2023-10-19 02:31:05 +00:00
|
|
|
prep_and_add_bootmem_folios(h, &folio_list);
|
2008-07-24 04:27:47 +00:00
|
|
|
}
|
2023-09-13 10:54:01 +00:00
|
|
|
|
2024-02-22 14:04:21 +00:00
|
|
|
static void __init gather_bootmem_prealloc_parallel(unsigned long start,
|
|
|
|
unsigned long end, void *arg)
|
|
|
|
{
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
for (nid = start; nid < end; nid++)
|
|
|
|
gather_bootmem_prealloc_node(nid);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init gather_bootmem_prealloc(void)
|
|
|
|
{
|
|
|
|
struct padata_mt_job job = {
|
|
|
|
.thread_fn = gather_bootmem_prealloc_parallel,
|
|
|
|
.fn_arg = NULL,
|
|
|
|
.start = 0,
|
|
|
|
.size = num_node_state(N_MEMORY),
|
|
|
|
.align = 1,
|
|
|
|
.min_chunk = 1,
|
|
|
|
.max_threads = num_node_state(N_MEMORY),
|
|
|
|
.numa_aware = true,
|
|
|
|
};
|
|
|
|
|
|
|
|
padata_do_multithreaded(&job);
|
|
|
|
}
|
|
|
|
|
2021-11-05 20:43:28 +00:00
|
|
|
static void __init hugetlb_hstate_alloc_pages_onenode(struct hstate *h, int nid)
|
|
|
|
{
|
|
|
|
unsigned long i;
|
|
|
|
char buf[32];
|
|
|
|
|
|
|
|
for (i = 0; i < h->max_huge_pages_node[nid]; ++i) {
|
|
|
|
if (hstate_is_gigantic(h)) {
|
|
|
|
if (!alloc_bootmem_huge_page(h, nid))
|
|
|
|
break;
|
|
|
|
} else {
|
2022-11-29 22:50:39 +00:00
|
|
|
struct folio *folio;
|
2021-11-05 20:43:28 +00:00
|
|
|
gfp_t gfp_mask = htlb_alloc_mask(h) | __GFP_THISNODE;
|
|
|
|
|
2022-11-29 22:50:39 +00:00
|
|
|
folio = alloc_fresh_hugetlb_folio(h, gfp_mask, nid,
|
2024-05-16 08:10:35 +00:00
|
|
|
&node_states[N_MEMORY]);
|
2022-11-29 22:50:39 +00:00
|
|
|
if (!folio)
|
2021-11-05 20:43:28 +00:00
|
|
|
break;
|
2023-08-16 15:11:51 +00:00
|
|
|
free_huge_folio(folio); /* free it into the hugepage allocator */
|
2021-11-05 20:43:28 +00:00
|
|
|
}
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
if (i == h->max_huge_pages_node[nid])
|
|
|
|
return;
|
|
|
|
|
|
|
|
string_get_size(huge_page_size(h), 1, STRING_UNITS_2, buf, 32);
|
|
|
|
pr_warn("HugeTLB: allocating %u of page size %s failed node%d. Only allocated %lu hugepages.\n",
|
|
|
|
h->max_huge_pages_node[nid], buf, nid, i);
|
|
|
|
h->max_huge_pages -= (h->max_huge_pages_node[nid] - i);
|
|
|
|
h->max_huge_pages_node[nid] = i;
|
|
|
|
}
|
2008-07-24 04:27:47 +00:00
|
|
|
|
hugetlb: code clean for hugetlb_hstate_alloc_pages
Patch series "hugetlb: parallelize hugetlb page init on boot", v6.
Introduction
------------
Hugetlb initialization during boot takes up a considerable amount of time.
For instance, on a 2TB system, initializing 1,800 1GB huge pages takes
1-2 seconds out of 10 seconds. Initializing 11,776 1GB pages on a 12TB
Intel host takes more than 1 minute[1]. This is a noteworthy figure.
Inspired by [2] and [3], hugetlb initialization can also be accelerated
through parallelization. Kernel already has infrastructure like
padata_do_multithreaded, this patch uses it to achieve effective results
by minimal modifications.
[1] https://lore.kernel.org/all/783f8bac-55b8-5b95-eb6a-11a583675000@google.com/
[2] https://lore.kernel.org/all/20200527173608.2885243-1-daniel.m.jordan@oracle.com/
[3] https://lore.kernel.org/all/20230906112605.2286994-1-usama.arif@bytedance.com/
[4] https://lore.kernel.org/all/76becfc1-e609-e3e8-2966-4053143170b6@google.com/
max_threads
-----------
This patch use `padata_do_multithreaded` like this:
```
job.max_threads = num_node_state(N_MEMORY) * multiplier;
padata_do_multithreaded(&job);
```
To fully utilize the CPU, the number of parallel threads needs to be
carefully considered. `max_threads = num_node_state(N_MEMORY)` does not
fully utilize the CPU, so we need to multiply it by a multiplier.
Tests below indicate that a multiplier of 2 significantly improves
performance, and although larger values also provide improvements, the
gains are marginal.
multiplier 1 2 3 4 5
------------ ------- ------- ------- ------- -------
256G 2node 358ms 215ms 157ms 134ms 126ms
2T 4node 979ms 679ms 543ms 489ms 481ms
50G 2node 71ms 44ms 37ms 30ms 31ms
Therefore, choosing 2 as the multiplier strikes a good balance between
enhancing parallel processing capabilities and maintaining efficient
resource management.
Test result
-----------
test case no patch(ms) patched(ms) saved
------------------- -------------- ------------- --------
256c2T(4 node) 1G 4745 2024 57.34%
128c1T(2 node) 1G 3358 1712 49.02%
12T 1G 77000 18300 76.23%
256c2T(4 node) 2M 3336 1051 68.52%
128c1T(2 node) 2M 1943 716 63.15%
This patch (of 8):
The readability of `hugetlb_hstate_alloc_pages` is poor. By cleaning the
code, its readability can be improved, facilitating future modifications.
This patch extracts two functions to reduce the complexity of
`hugetlb_hstate_alloc_pages` and has no functional changes.
- hugetlb_hstate_alloc_pages_node_specific() to handle iterates through
each online node and performs allocation if necessary.
- hugetlb_hstate_alloc_pages_report() report error during allocation.
And the value of h->max_huge_pages is updated accordingly.
Link: https://lkml.kernel.org/r/20240222140422.393911-1-gang.li@linux.dev
Link: https://lkml.kernel.org/r/20240222140422.393911-2-gang.li@linux.dev
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-22 14:04:14 +00:00
|
|
|
static bool __init hugetlb_hstate_alloc_pages_specific_nodes(struct hstate *h)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
bool node_specific_alloc = false;
|
|
|
|
|
|
|
|
for_each_online_node(i) {
|
|
|
|
if (h->max_huge_pages_node[i] > 0) {
|
|
|
|
hugetlb_hstate_alloc_pages_onenode(h, i);
|
|
|
|
node_specific_alloc = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return node_specific_alloc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init hugetlb_hstate_alloc_pages_errcheck(unsigned long allocated, struct hstate *h)
|
|
|
|
{
|
|
|
|
if (allocated < h->max_huge_pages) {
|
|
|
|
char buf[32];
|
|
|
|
|
|
|
|
string_get_size(huge_page_size(h), 1, STRING_UNITS_2, buf, 32);
|
|
|
|
pr_warn("HugeTLB: allocating %lu of page size %s failed. Only allocated %lu hugepages.\n",
|
|
|
|
h->max_huge_pages, buf, allocated);
|
|
|
|
h->max_huge_pages = allocated;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-02-22 14:04:20 +00:00
|
|
|
static void __init hugetlb_pages_alloc_boot_node(unsigned long start, unsigned long end, void *arg)
|
|
|
|
{
|
|
|
|
struct hstate *h = (struct hstate *)arg;
|
|
|
|
int i, num = end - start;
|
|
|
|
nodemask_t node_alloc_noretry;
|
|
|
|
LIST_HEAD(folio_list);
|
|
|
|
int next_node = first_online_node;
|
|
|
|
|
|
|
|
/* Bit mask controlling how hard we retry per-node allocations.*/
|
|
|
|
nodes_clear(node_alloc_noretry);
|
|
|
|
|
|
|
|
for (i = 0; i < num; ++i) {
|
|
|
|
struct folio *folio = alloc_pool_huge_folio(h, &node_states[N_MEMORY],
|
|
|
|
&node_alloc_noretry, &next_node);
|
|
|
|
if (!folio)
|
|
|
|
break;
|
|
|
|
|
|
|
|
list_move(&folio->lru, &folio_list);
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
|
|
|
|
prep_and_add_allocated_folios(h, &folio_list);
|
|
|
|
}
|
|
|
|
|
2024-02-22 14:04:15 +00:00
|
|
|
static unsigned long __init hugetlb_gigantic_pages_alloc_boot(struct hstate *h)
|
|
|
|
{
|
|
|
|
unsigned long i;
|
|
|
|
|
|
|
|
for (i = 0; i < h->max_huge_pages; ++i) {
|
|
|
|
if (!alloc_bootmem_huge_page(h, NUMA_NO_NODE))
|
|
|
|
break;
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long __init hugetlb_pages_alloc_boot(struct hstate *h)
|
|
|
|
{
|
2024-02-22 14:04:20 +00:00
|
|
|
struct padata_mt_job job = {
|
|
|
|
.fn_arg = h,
|
|
|
|
.align = 1,
|
|
|
|
.numa_aware = true
|
|
|
|
};
|
2024-02-22 14:04:15 +00:00
|
|
|
|
2024-02-22 14:04:20 +00:00
|
|
|
job.thread_fn = hugetlb_pages_alloc_boot_node;
|
|
|
|
job.start = 0;
|
|
|
|
job.size = h->max_huge_pages;
|
2024-02-22 14:04:15 +00:00
|
|
|
|
2024-02-22 14:04:20 +00:00
|
|
|
/*
|
|
|
|
* job.max_threads is twice the num_node_state(N_MEMORY),
|
|
|
|
*
|
|
|
|
* Tests below indicate that a multiplier of 2 significantly improves
|
|
|
|
* performance, and although larger values also provide improvements,
|
|
|
|
* the gains are marginal.
|
|
|
|
*
|
|
|
|
* Therefore, choosing 2 as the multiplier strikes a good balance between
|
|
|
|
* enhancing parallel processing capabilities and maintaining efficient
|
|
|
|
* resource management.
|
|
|
|
*
|
|
|
|
* +------------+-------+-------+-------+-------+-------+
|
|
|
|
* | multiplier | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
* +------------+-------+-------+-------+-------+-------+
|
|
|
|
* | 256G 2node | 358ms | 215ms | 157ms | 134ms | 126ms |
|
|
|
|
* | 2T 4node | 979ms | 679ms | 543ms | 489ms | 481ms |
|
|
|
|
* | 50G 2node | 71ms | 44ms | 37ms | 30ms | 31ms |
|
|
|
|
* +------------+-------+-------+-------+-------+-------+
|
|
|
|
*/
|
|
|
|
job.max_threads = num_node_state(N_MEMORY) * 2;
|
|
|
|
job.min_chunk = h->max_huge_pages / num_node_state(N_MEMORY) / 2;
|
|
|
|
padata_do_multithreaded(&job);
|
2024-02-22 14:04:15 +00:00
|
|
|
|
2024-02-22 14:04:20 +00:00
|
|
|
return h->nr_huge_pages;
|
2024-02-22 14:04:15 +00:00
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:04 +00:00
|
|
|
/*
|
|
|
|
* NOTE: this routine is called in different contexts for gigantic and
|
|
|
|
* non-gigantic pages.
|
|
|
|
* - For gigantic pages, this is called early in the boot process and
|
|
|
|
* pages are allocated from memblock allocated or something similar.
|
|
|
|
* Gigantic pages are actually added to pools later with the routine
|
|
|
|
* gather_bootmem_prealloc.
|
|
|
|
* - For non-gigantic pages, this is called later in the boot process after
|
|
|
|
* all of mm is up and functional. Pages are allocated from buddy and
|
|
|
|
* then added to hugetlb pools.
|
|
|
|
*/
|
2008-07-24 04:27:48 +00:00
|
|
|
static void __init hugetlb_hstate_alloc_pages(struct hstate *h)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2024-02-22 14:04:15 +00:00
|
|
|
unsigned long allocated;
|
2024-02-22 14:04:21 +00:00
|
|
|
static bool initialized __initdata;
|
2021-11-05 20:43:28 +00:00
|
|
|
|
|
|
|
/* skip gigantic hugepages allocation if hugetlb_cma enabled */
|
|
|
|
if (hstate_is_gigantic(h) && hugetlb_cma_size) {
|
|
|
|
pr_warn_once("HugeTLB: hugetlb_cma is enabled, skip boot time allocation\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2024-02-22 14:04:21 +00:00
|
|
|
/* hugetlb_hstate_alloc_pages will be called many times, initialize huge_boot_pages once */
|
|
|
|
if (!initialized) {
|
|
|
|
int i = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < MAX_NUMNODES; i++)
|
|
|
|
INIT_LIST_HEAD(&huge_boot_pages[i]);
|
|
|
|
initialized = true;
|
|
|
|
}
|
|
|
|
|
2021-11-05 20:43:28 +00:00
|
|
|
/* do node specific alloc */
|
hugetlb: code clean for hugetlb_hstate_alloc_pages
Patch series "hugetlb: parallelize hugetlb page init on boot", v6.
Introduction
------------
Hugetlb initialization during boot takes up a considerable amount of time.
For instance, on a 2TB system, initializing 1,800 1GB huge pages takes
1-2 seconds out of 10 seconds. Initializing 11,776 1GB pages on a 12TB
Intel host takes more than 1 minute[1]. This is a noteworthy figure.
Inspired by [2] and [3], hugetlb initialization can also be accelerated
through parallelization. Kernel already has infrastructure like
padata_do_multithreaded, this patch uses it to achieve effective results
by minimal modifications.
[1] https://lore.kernel.org/all/783f8bac-55b8-5b95-eb6a-11a583675000@google.com/
[2] https://lore.kernel.org/all/20200527173608.2885243-1-daniel.m.jordan@oracle.com/
[3] https://lore.kernel.org/all/20230906112605.2286994-1-usama.arif@bytedance.com/
[4] https://lore.kernel.org/all/76becfc1-e609-e3e8-2966-4053143170b6@google.com/
max_threads
-----------
This patch use `padata_do_multithreaded` like this:
```
job.max_threads = num_node_state(N_MEMORY) * multiplier;
padata_do_multithreaded(&job);
```
To fully utilize the CPU, the number of parallel threads needs to be
carefully considered. `max_threads = num_node_state(N_MEMORY)` does not
fully utilize the CPU, so we need to multiply it by a multiplier.
Tests below indicate that a multiplier of 2 significantly improves
performance, and although larger values also provide improvements, the
gains are marginal.
multiplier 1 2 3 4 5
------------ ------- ------- ------- ------- -------
256G 2node 358ms 215ms 157ms 134ms 126ms
2T 4node 979ms 679ms 543ms 489ms 481ms
50G 2node 71ms 44ms 37ms 30ms 31ms
Therefore, choosing 2 as the multiplier strikes a good balance between
enhancing parallel processing capabilities and maintaining efficient
resource management.
Test result
-----------
test case no patch(ms) patched(ms) saved
------------------- -------------- ------------- --------
256c2T(4 node) 1G 4745 2024 57.34%
128c1T(2 node) 1G 3358 1712 49.02%
12T 1G 77000 18300 76.23%
256c2T(4 node) 2M 3336 1051 68.52%
128c1T(2 node) 2M 1943 716 63.15%
This patch (of 8):
The readability of `hugetlb_hstate_alloc_pages` is poor. By cleaning the
code, its readability can be improved, facilitating future modifications.
This patch extracts two functions to reduce the complexity of
`hugetlb_hstate_alloc_pages` and has no functional changes.
- hugetlb_hstate_alloc_pages_node_specific() to handle iterates through
each online node and performs allocation if necessary.
- hugetlb_hstate_alloc_pages_report() report error during allocation.
And the value of h->max_huge_pages is updated accordingly.
Link: https://lkml.kernel.org/r/20240222140422.393911-1-gang.li@linux.dev
Link: https://lkml.kernel.org/r/20240222140422.393911-2-gang.li@linux.dev
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-22 14:04:14 +00:00
|
|
|
if (hugetlb_hstate_alloc_pages_specific_nodes(h))
|
2021-11-05 20:43:28 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
/* below will do all node balanced alloc */
|
2024-02-22 14:04:15 +00:00
|
|
|
if (hstate_is_gigantic(h))
|
|
|
|
allocated = hugetlb_gigantic_pages_alloc_boot(h);
|
|
|
|
else
|
|
|
|
allocated = hugetlb_pages_alloc_boot(h);
|
2023-10-19 02:31:04 +00:00
|
|
|
|
2024-02-22 14:04:15 +00:00
|
|
|
hugetlb_hstate_alloc_pages_errcheck(allocated, h);
|
2008-07-24 04:27:42 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void __init hugetlb_init_hstates(void)
|
|
|
|
{
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
struct hstate *h, *h2;
|
2008-07-24 04:27:42 +00:00
|
|
|
|
|
|
|
for_each_hstate(h) {
|
2008-07-24 04:27:48 +00:00
|
|
|
/* oversize hugepages were init'ed in early boot */
|
2014-06-04 23:07:08 +00:00
|
|
|
if (!hstate_is_gigantic(h))
|
2008-07-24 04:27:48 +00:00
|
|
|
hugetlb_hstate_alloc_pages(h);
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Set demote order for each hstate. Note that
|
|
|
|
* h->demote_order is initially 0.
|
|
|
|
* - We can not demote gigantic pages if runtime freeing
|
|
|
|
* is not supported, so skip this.
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
* - If CMA allocation is possible, we can not demote
|
|
|
|
* HUGETLB_PAGE_ORDER or smaller size pages.
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
*/
|
|
|
|
if (hstate_is_gigantic(h) && !gigantic_page_runtime_supported())
|
|
|
|
continue;
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
if (hugetlb_cma_size && h->order <= HUGETLB_PAGE_ORDER)
|
|
|
|
continue;
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
for_each_hstate(h2) {
|
|
|
|
if (h2 == h)
|
|
|
|
continue;
|
|
|
|
if (h2->order < h->order &&
|
|
|
|
h2->order > h->demote_order)
|
|
|
|
h->demote_order = h2->order;
|
|
|
|
}
|
2008-07-24 04:27:42 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init report_hugepages(void)
|
|
|
|
{
|
|
|
|
struct hstate *h;
|
|
|
|
|
|
|
|
for_each_hstate(h) {
|
2008-07-24 04:27:49 +00:00
|
|
|
char buf[32];
|
2017-07-10 22:48:56 +00:00
|
|
|
|
|
|
|
string_get_size(huge_page_size(h), 1, STRING_UNITS_2, buf, 32);
|
2022-06-28 09:22:33 +00:00
|
|
|
pr_info("HugeTLB: registered %s page size, pre-allocated %ld pages\n",
|
2017-07-10 22:48:56 +00:00
|
|
|
buf, h->free_huge_pages);
|
2022-06-28 09:22:33 +00:00
|
|
|
pr_info("HugeTLB: %d KiB vmemmap can be freed for a %s page\n",
|
|
|
|
hugetlb_vmemmap_optimizable_size(h) / SZ_1K, buf);
|
2008-07-24 04:27:42 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
#ifdef CONFIG_HIGHMEM
|
2009-12-15 01:58:16 +00:00
|
|
|
static void try_to_free_low(struct hstate *h, unsigned long count,
|
|
|
|
nodemask_t *nodes_allowed)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2006-09-26 06:31:55 +00:00
|
|
|
int i;
|
2021-05-05 01:34:59 +00:00
|
|
|
LIST_HEAD(page_list);
|
2006-09-26 06:31:55 +00:00
|
|
|
|
2021-05-05 01:35:10 +00:00
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
2014-06-04 23:07:08 +00:00
|
|
|
if (hstate_is_gigantic(h))
|
2008-07-24 04:27:47 +00:00
|
|
|
return;
|
|
|
|
|
2021-05-05 01:34:59 +00:00
|
|
|
/*
|
|
|
|
* Collect pages to be freed on a list, and free after dropping lock
|
|
|
|
*/
|
2009-12-15 01:58:16 +00:00
|
|
|
for_each_node_mask(i, *nodes_allowed) {
|
2023-08-24 14:13:24 +00:00
|
|
|
struct folio *folio, *next;
|
2008-07-24 04:27:41 +00:00
|
|
|
struct list_head *freel = &h->hugepage_freelists[i];
|
2023-08-24 14:13:24 +00:00
|
|
|
list_for_each_entry_safe(folio, next, freel, lru) {
|
2008-07-24 04:27:41 +00:00
|
|
|
if (count >= h->nr_huge_pages)
|
2021-05-05 01:34:59 +00:00
|
|
|
goto out;
|
2023-08-24 14:13:24 +00:00
|
|
|
if (folio_test_highmem(folio))
|
2005-04-16 22:20:36 +00:00
|
|
|
continue;
|
2023-08-24 14:13:24 +00:00
|
|
|
remove_hugetlb_folio(h, folio, false);
|
|
|
|
list_add(&folio->lru, &page_list);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
}
|
2021-05-05 01:34:59 +00:00
|
|
|
|
|
|
|
out:
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2021-05-05 01:35:03 +00:00
|
|
|
update_and_free_pages_bulk(h, &page_list);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
#else
|
2009-12-15 01:58:16 +00:00
|
|
|
static inline void try_to_free_low(struct hstate *h, unsigned long count,
|
|
|
|
nodemask_t *nodes_allowed)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
/*
|
|
|
|
* Increment or decrement surplus_huge_pages. Keep node-specific counters
|
|
|
|
* balanced by operating on them in a round-robin fashion.
|
|
|
|
* Returns 1 if an adjustment was made.
|
|
|
|
*/
|
2009-12-15 01:58:16 +00:00
|
|
|
static int adjust_pool_surplus(struct hstate *h, nodemask_t *nodes_allowed,
|
|
|
|
int delta)
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
{
|
2013-09-11 21:21:00 +00:00
|
|
|
int nr_nodes, node;
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
|
2021-05-05 01:35:10 +00:00
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
VM_BUG_ON(delta != -1 && delta != 1);
|
|
|
|
|
2013-09-11 21:21:00 +00:00
|
|
|
if (delta < 0) {
|
2024-02-22 14:04:16 +00:00
|
|
|
for_each_node_mask_to_alloc(&h->next_nid_to_alloc, nr_nodes, node, nodes_allowed) {
|
2013-09-11 21:21:00 +00:00
|
|
|
if (h->surplus_huge_pages_node[node])
|
|
|
|
goto found;
|
2009-09-22 00:01:22 +00:00
|
|
|
}
|
2013-09-11 21:21:00 +00:00
|
|
|
} else {
|
|
|
|
for_each_node_mask_to_free(h, nr_nodes, node, nodes_allowed) {
|
|
|
|
if (h->surplus_huge_pages_node[node] <
|
|
|
|
h->nr_huge_pages_node[node])
|
|
|
|
goto found;
|
2009-09-22 00:01:22 +00:00
|
|
|
}
|
2013-09-11 21:21:00 +00:00
|
|
|
}
|
|
|
|
return 0;
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
|
2013-09-11 21:21:00 +00:00
|
|
|
found:
|
|
|
|
h->surplus_huge_pages += delta;
|
|
|
|
h->surplus_huge_pages_node[node] += delta;
|
|
|
|
return 1;
|
mm: introduce PageHuge() for testing huge/gigantic pages
A series of patches to enhance the /proc/pagemap interface and to add a
userspace executable which can be used to present the pagemap data.
Export 10 more flags to end users (and more for kernel developers):
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
a simple demo of the page-types tool
# ./page-types -h
page-types [options]
-r|--raw Raw mode, for kernel developers
-a|--addr addr-spec Walk a range of pages
-b|--bits bits-spec Walk pages with specified bits
-l|--list Show page details in ranges
-L|--list-each Show page details one by one
-N|--no-summary Don't show summay info
-h|--help Show this usage message
addr-spec:
N one page at offset N (unit: pages)
N+M pages range from N to N+M-1
N,M pages range from N to M-1
N, pages range from N to end
,M pages range from 0 to M
bits-spec:
bit1,bit2 (flags & (bit1|bit2)) != 0
bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1
bit1,~bit2 (flags & (bit1|bit2)) == bit1
=bit1,bit2 flags == (bit1|bit2)
bit-names:
locked error referenced uptodate
dirty lru active slab
writeback reclaim buddy mmap
anonymous swapcache swapbacked compound_head
compound_tail huge unevictable hwpoison
nopage reserved(r) mlocked(r) mappedtodisk(r)
private(r) private_2(r) owner_private(r) arch(r)
uncached(r) readahead(o) slob_free(o) slub_frozen(o)
slub_debug(o)
(r) raw mode bits (o) overloaded bits
# ./page-types
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 487369 1903 _________________________________
0x0000000000000014 5 0 __R_D____________________________ referenced,dirty
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000000000024 34 0 __R__l___________________________ referenced,lru
0x0000000000000028 3838 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 48 0 ___U_l_______________________I___ uptodate,lru,readahead
0x000000000000002c 6478 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x0000000000000040 8344 32 ______A__________________________ active
0x0000000000000060 1 0 _____lA__________________________ lru,active
0x0000000000000068 348 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x000000000000006c 988 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 503 1 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 30 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types -r
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 468002 1828 _________________________________
0x0000000100000000 19102 74 _____________________r___________ reserved
0x0000000000008000 41 0 _______________H_________________ compound_head
0x0000000000010000 188 0 ________________T________________ compound_tail
0x0000000000008014 1 0 __R_D__________H_________________ referenced,dirty,compound_head
0x0000000000010014 4 0 __R_D___________T________________ referenced,dirty,compound_tail
0x0000000000000020 1 0 _____l___________________________ lru
0x0000000800000024 34 0 __R__l__________________P________ referenced,lru,private
0x0000000000000028 3794 14 ___U_l___________________________ uptodate,lru
0x0001000000000028 46 0 ___U_l_______________________I___ uptodate,lru,readahead
0x0000000400000028 44 0 ___U_l_________________d_________ uptodate,lru,mappedtodisk
0x0001000400000028 2 0 ___U_l_________________d_____I___ uptodate,lru,mappedtodisk,readahead
0x000000000000002c 6434 25 __RU_l___________________________ referenced,uptodate,lru
0x000100000000002c 47 0 __RU_l_______________________I___ referenced,uptodate,lru,readahead
0x000000040000002c 14 0 __RU_l_________________d_________ referenced,uptodate,lru,mappedtodisk
0x000000080000002c 30 0 __RU_l__________________P________ referenced,uptodate,lru,private
0x0000000800000040 8124 31 ______A_________________P________ active,private
0x0000000000000040 219 0 ______A__________________________ active
0x0000000800000060 1 0 _____lA_________________P________ lru,active,private
0x0000000000000068 322 1 ___U_lA__________________________ uptodate,lru,active
0x0001000000000068 12 0 ___U_lA______________________I___ uptodate,lru,active,readahead
0x0000000400000068 13 0 ___U_lA________________d_________ uptodate,lru,active,mappedtodisk
0x0000000800000068 12 0 ___U_lA_________________P________ uptodate,lru,active,private
0x000000000000006c 977 3 __RU_lA__________________________ referenced,uptodate,lru,active
0x000100000000006c 48 0 __RU_lA______________________I___ referenced,uptodate,lru,active,readahead
0x000000040000006c 5 0 __RU_lA________________d_________ referenced,uptodate,lru,active,mappedtodisk
0x000000080000006c 3 0 __RU_lA_________________P________ referenced,uptodate,lru,active,private
0x0000000c0000006c 3 0 __RU_lA________________dP________ referenced,uptodate,lru,active,mappedtodisk,private
0x0000000c00000068 1 0 ___U_lA________________dP________ uptodate,lru,active,mappedtodisk,private
0x0000000000004078 1 0 ___UDlA_______b__________________ uptodate,dirty,lru,active,swapbacked
0x000000000000407c 34 0 __RUDlA_______b__________________ referenced,uptodate,dirty,lru,active,swapbacked
0x0000000000000400 538 2 __________B______________________ buddy
0x0000000000000804 1 0 __R________M_____________________ referenced,mmap
0x0000000000000828 1029 4 ___U_l_____M_____________________ uptodate,lru,mmap
0x0001000000000828 43 0 ___U_l_____M_________________I___ uptodate,lru,mmap,readahead
0x000000000000082c 382 1 __RU_l_____M_____________________ referenced,uptodate,lru,mmap
0x000100000000082c 12 0 __RU_l_____M_________________I___ referenced,uptodate,lru,mmap,readahead
0x0000000000000868 192 0 ___U_lA____M_____________________ uptodate,lru,active,mmap
0x0001000000000868 12 0 ___U_lA____M_________________I___ uptodate,lru,active,mmap,readahead
0x000000000000086c 800 3 __RU_lA____M_____________________ referenced,uptodate,lru,active,mmap
0x000100000000086c 31 0 __RU_lA____M_________________I___ referenced,uptodate,lru,active,mmap,readahead
0x0000000000004878 2 0 ___UDlA____M__b__________________ uptodate,dirty,lru,active,mmap,swapbacked
0x0000000000001000 492 1 ____________a____________________ anonymous
0x0000000000005008 2 0 ___U________a_b__________________ uptodate,anonymous,swapbacked
0x0000000000005808 4 0 ___U_______Ma_b__________________ uptodate,mmap,anonymous,swapbacked
0x000000000000580c 1 0 __RU_______Ma_b__________________ referenced,uptodate,mmap,anonymous,swapbacked
0x0000000000005868 2839 11 ___U_lA____Ma_b__________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 29 0 __RU_lA____Ma_b__________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 513968 2007
# ./page-types --raw --list --no-summary --bits reserved
offset count flags
0 15 _____________________r___________
31 4 _____________________r___________
159 97 _____________________r___________
4096 2067 _____________________r___________
6752 2390 _____________________r___________
9355 3 _____________________r___________
9728 14526 _____________________r___________
This patch:
Introduce PageHuge(), which identifies huge/gigantic pages by their
dedicated compound destructor functions.
Also move prep_compound_gigantic_page() to hugetlb.c and make
__free_pages_ok() non-static.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 22:32:22 +00:00
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:41 +00:00
|
|
|
#define persistent_huge_pages(h) (h->nr_huge_pages - h->surplus_huge_pages)
|
2019-05-14 00:19:20 +00:00
|
|
|
static int set_max_huge_pages(struct hstate *h, unsigned long count, int nid,
|
2019-05-14 00:19:04 +00:00
|
|
|
nodemask_t *nodes_allowed)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2023-10-19 02:31:04 +00:00
|
|
|
unsigned long min_count;
|
|
|
|
unsigned long allocated;
|
|
|
|
struct folio *folio;
|
2021-05-05 01:35:03 +00:00
|
|
|
LIST_HEAD(page_list);
|
2019-09-23 22:37:35 +00:00
|
|
|
NODEMASK_ALLOC(nodemask_t, node_alloc_noretry, GFP_KERNEL);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Bit mask controlling how hard we retry per-node allocations.
|
|
|
|
* If we can not allocate the bit mask, do not attempt to allocate
|
|
|
|
* the requested huge pages.
|
|
|
|
*/
|
|
|
|
if (node_alloc_noretry)
|
|
|
|
nodes_clear(*node_alloc_noretry);
|
|
|
|
else
|
|
|
|
return -ENOMEM;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2021-05-05 01:34:52 +00:00
|
|
|
/*
|
|
|
|
* resize_lock mutex prevents concurrent adjustments to number of
|
|
|
|
* pages in hstate via the proc/sysfs interfaces.
|
|
|
|
*/
|
|
|
|
mutex_lock(&h->resize_lock);
|
2021-07-01 01:47:17 +00:00
|
|
|
flush_free_hpage_work(h);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2019-05-14 00:19:04 +00:00
|
|
|
|
2019-05-14 00:19:20 +00:00
|
|
|
/*
|
|
|
|
* Check for a node specific request.
|
|
|
|
* Changing node specific huge page count may require a corresponding
|
|
|
|
* change to the global count. In any case, the passed node mask
|
|
|
|
* (nodes_allowed) will restrict alloc/free to the specified node.
|
|
|
|
*/
|
|
|
|
if (nid != NUMA_NO_NODE) {
|
|
|
|
unsigned long old_count = count;
|
|
|
|
|
2023-08-29 03:33:43 +00:00
|
|
|
count += persistent_huge_pages(h) -
|
|
|
|
(h->nr_huge_pages_node[nid] -
|
|
|
|
h->surplus_huge_pages_node[nid]);
|
2019-05-14 00:19:20 +00:00
|
|
|
/*
|
|
|
|
* User may have specified a large count value which caused the
|
|
|
|
* above calculation to overflow. In this case, they wanted
|
|
|
|
* to allocate as many huge pages as possible. Set count to
|
|
|
|
* largest possible value to align with their intention.
|
|
|
|
*/
|
|
|
|
if (count < old_count)
|
|
|
|
count = ULONG_MAX;
|
|
|
|
}
|
|
|
|
|
2019-05-14 00:19:04 +00:00
|
|
|
/*
|
|
|
|
* Gigantic pages runtime allocation depend on the capability for large
|
|
|
|
* page range allocation.
|
|
|
|
* If the system does not provide this feature, return an error when
|
|
|
|
* the user tries to allocate gigantic pages but let the user free the
|
|
|
|
* boottime allocated gigantic pages.
|
|
|
|
*/
|
|
|
|
if (hstate_is_gigantic(h) && !IS_ENABLED(CONFIG_CONTIG_ALLOC)) {
|
|
|
|
if (count > persistent_huge_pages(h)) {
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2021-05-05 01:34:52 +00:00
|
|
|
mutex_unlock(&h->resize_lock);
|
2019-09-23 22:37:35 +00:00
|
|
|
NODEMASK_FREE(node_alloc_noretry);
|
2019-05-14 00:19:04 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
/* Fall through to decrease pool */
|
|
|
|
}
|
2008-07-24 04:27:47 +00:00
|
|
|
|
2007-10-16 08:26:18 +00:00
|
|
|
/*
|
|
|
|
* Increase the pool size
|
|
|
|
* First take pages out of surplus state. Then make up the
|
|
|
|
* remaining difference by allocating fresh huge pages.
|
hugetlb: introduce nr_overcommit_hugepages sysctl
hugetlb: introduce nr_overcommit_hugepages sysctl
While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I
became convinced that having a boolean sysctl was insufficient:
1) To support per-node control of hugepages, I have previously submitted
patches to add a sysfs attribute related to nr_hugepages. However, with
a boolean global value and per-mount quota enforcement constraining the
dynamic pool, adding corresponding control of the dynamic pool on a
per-node basis seems inconsistent to me.
2) Administration of the hugetlb dynamic pool with multiple hugetlbfs
mount points is, arguably, more arduous than it needs to be. Each quota
would need to be set separately, and the sum would need to be monitored.
To ease the administration, and to help make the way for per-node
control of the static & dynamic hugepage pool, I added a separate
sysctl, nr_overcommit_hugepages. This value serves as a high watermark
for the overall hugepage pool, while nr_hugepages serves as a low
watermark. The boolean sysctl can then be removed, as the condition
nr_overcommit_hugepages > 0
indicates the same administrative setting as
hugetlb_dynamic_pool == 1
Quotas still serve as local enforcement of the size of the pool on a
per-mount basis.
A few caveats:
1) There is a race whereby the global surplus huge page counter is
incremented before a hugepage has allocated. Another process could then
try grow the pool, and fail to convert a surplus huge page to a normal
huge page and instead allocate a fresh huge page. I believe this is
benign, as no memory is leaked (the actual pages are still tracked
correctly) and the counters won't go out of sync.
2) Shrinking the static pool while a surplus is in effect will allow the
number of surplus huge pages to exceed the overcommit value. As long as
this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
Successfully tested on x86_64 with the current libhugetlbfs snapshot,
modified to use the new sysctl.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18 00:20:12 +00:00
|
|
|
*
|
2023-01-13 22:30:53 +00:00
|
|
|
* We might race with alloc_surplus_hugetlb_folio() here and be unable
|
hugetlb: introduce nr_overcommit_hugepages sysctl
hugetlb: introduce nr_overcommit_hugepages sysctl
While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I
became convinced that having a boolean sysctl was insufficient:
1) To support per-node control of hugepages, I have previously submitted
patches to add a sysfs attribute related to nr_hugepages. However, with
a boolean global value and per-mount quota enforcement constraining the
dynamic pool, adding corresponding control of the dynamic pool on a
per-node basis seems inconsistent to me.
2) Administration of the hugetlb dynamic pool with multiple hugetlbfs
mount points is, arguably, more arduous than it needs to be. Each quota
would need to be set separately, and the sum would need to be monitored.
To ease the administration, and to help make the way for per-node
control of the static & dynamic hugepage pool, I added a separate
sysctl, nr_overcommit_hugepages. This value serves as a high watermark
for the overall hugepage pool, while nr_hugepages serves as a low
watermark. The boolean sysctl can then be removed, as the condition
nr_overcommit_hugepages > 0
indicates the same administrative setting as
hugetlb_dynamic_pool == 1
Quotas still serve as local enforcement of the size of the pool on a
per-mount basis.
A few caveats:
1) There is a race whereby the global surplus huge page counter is
incremented before a hugepage has allocated. Another process could then
try grow the pool, and fail to convert a surplus huge page to a normal
huge page and instead allocate a fresh huge page. I believe this is
benign, as no memory is leaked (the actual pages are still tracked
correctly) and the counters won't go out of sync.
2) Shrinking the static pool while a surplus is in effect will allow the
number of surplus huge pages to exceed the overcommit value. As long as
this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
Successfully tested on x86_64 with the current libhugetlbfs snapshot,
modified to use the new sysctl.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18 00:20:12 +00:00
|
|
|
* to convert a surplus huge page to a normal huge page. That is
|
|
|
|
* not critical, though, it just means the overall size of the
|
|
|
|
* pool might be one hugepage larger than it needs to be, but
|
|
|
|
* within all the constraints specified by the sysctls.
|
2007-10-16 08:26:18 +00:00
|
|
|
*/
|
2008-07-24 04:27:41 +00:00
|
|
|
while (h->surplus_huge_pages && count > persistent_huge_pages(h)) {
|
2009-12-15 01:58:16 +00:00
|
|
|
if (!adjust_pool_surplus(h, nodes_allowed, -1))
|
2007-10-16 08:26:18 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2023-10-19 02:31:04 +00:00
|
|
|
allocated = 0;
|
|
|
|
while (count > (persistent_huge_pages(h) + allocated)) {
|
2007-10-16 08:26:18 +00:00
|
|
|
/*
|
|
|
|
* If this allocation races such that we no longer need the
|
2023-08-16 15:11:51 +00:00
|
|
|
* page, free_huge_folio will handle it by freeing the page
|
2007-10-16 08:26:18 +00:00
|
|
|
* and reducing the surplus.
|
|
|
|
*/
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2016-08-02 21:02:31 +00:00
|
|
|
|
|
|
|
/* yield cpu to avoid soft lockup */
|
|
|
|
cond_resched();
|
|
|
|
|
2023-10-19 02:31:04 +00:00
|
|
|
folio = alloc_pool_huge_folio(h, nodes_allowed,
|
2024-02-22 14:04:16 +00:00
|
|
|
node_alloc_noretry,
|
|
|
|
&h->next_nid_to_alloc);
|
2023-10-19 02:31:04 +00:00
|
|
|
if (!folio) {
|
|
|
|
prep_and_add_allocated_folios(h, &page_list);
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2007-10-16 08:26:18 +00:00
|
|
|
goto out;
|
2023-10-19 02:31:04 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
list_add(&folio->lru, &page_list);
|
|
|
|
allocated++;
|
2007-10-16 08:26:18 +00:00
|
|
|
|
2009-12-15 01:59:56 +00:00
|
|
|
/* Bail for signals. Probably ctrl-c from user */
|
2023-10-19 02:31:04 +00:00
|
|
|
if (signal_pending(current)) {
|
|
|
|
prep_and_add_allocated_folios(h, &page_list);
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2009-12-15 01:59:56 +00:00
|
|
|
goto out;
|
2023-10-19 02:31:04 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Add allocated pages to the pool */
|
|
|
|
if (!list_empty(&page_list)) {
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
prep_and_add_allocated_folios(h, &page_list);
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2007-10-16 08:26:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Decrease the pool size
|
|
|
|
* First return free pages to the buddy allocator (being careful
|
|
|
|
* to keep enough around to satisfy reservations). Then place
|
|
|
|
* pages into surplus state as needed so the pool will shrink
|
|
|
|
* to the desired size as pages become free.
|
hugetlb: introduce nr_overcommit_hugepages sysctl
hugetlb: introduce nr_overcommit_hugepages sysctl
While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I
became convinced that having a boolean sysctl was insufficient:
1) To support per-node control of hugepages, I have previously submitted
patches to add a sysfs attribute related to nr_hugepages. However, with
a boolean global value and per-mount quota enforcement constraining the
dynamic pool, adding corresponding control of the dynamic pool on a
per-node basis seems inconsistent to me.
2) Administration of the hugetlb dynamic pool with multiple hugetlbfs
mount points is, arguably, more arduous than it needs to be. Each quota
would need to be set separately, and the sum would need to be monitored.
To ease the administration, and to help make the way for per-node
control of the static & dynamic hugepage pool, I added a separate
sysctl, nr_overcommit_hugepages. This value serves as a high watermark
for the overall hugepage pool, while nr_hugepages serves as a low
watermark. The boolean sysctl can then be removed, as the condition
nr_overcommit_hugepages > 0
indicates the same administrative setting as
hugetlb_dynamic_pool == 1
Quotas still serve as local enforcement of the size of the pool on a
per-mount basis.
A few caveats:
1) There is a race whereby the global surplus huge page counter is
incremented before a hugepage has allocated. Another process could then
try grow the pool, and fail to convert a surplus huge page to a normal
huge page and instead allocate a fresh huge page. I believe this is
benign, as no memory is leaked (the actual pages are still tracked
correctly) and the counters won't go out of sync.
2) Shrinking the static pool while a surplus is in effect will allow the
number of surplus huge pages to exceed the overcommit value. As long as
this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
Successfully tested on x86_64 with the current libhugetlbfs snapshot,
modified to use the new sysctl.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18 00:20:12 +00:00
|
|
|
*
|
|
|
|
* By placing pages into the surplus state independent of the
|
|
|
|
* overcommit value, we are allowing the surplus pool size to
|
|
|
|
* exceed overcommit. There are few sane options here. Since
|
2023-01-13 22:30:53 +00:00
|
|
|
* alloc_surplus_hugetlb_folio() is checking the global counter,
|
hugetlb: introduce nr_overcommit_hugepages sysctl
hugetlb: introduce nr_overcommit_hugepages sysctl
While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I
became convinced that having a boolean sysctl was insufficient:
1) To support per-node control of hugepages, I have previously submitted
patches to add a sysfs attribute related to nr_hugepages. However, with
a boolean global value and per-mount quota enforcement constraining the
dynamic pool, adding corresponding control of the dynamic pool on a
per-node basis seems inconsistent to me.
2) Administration of the hugetlb dynamic pool with multiple hugetlbfs
mount points is, arguably, more arduous than it needs to be. Each quota
would need to be set separately, and the sum would need to be monitored.
To ease the administration, and to help make the way for per-node
control of the static & dynamic hugepage pool, I added a separate
sysctl, nr_overcommit_hugepages. This value serves as a high watermark
for the overall hugepage pool, while nr_hugepages serves as a low
watermark. The boolean sysctl can then be removed, as the condition
nr_overcommit_hugepages > 0
indicates the same administrative setting as
hugetlb_dynamic_pool == 1
Quotas still serve as local enforcement of the size of the pool on a
per-mount basis.
A few caveats:
1) There is a race whereby the global surplus huge page counter is
incremented before a hugepage has allocated. Another process could then
try grow the pool, and fail to convert a surplus huge page to a normal
huge page and instead allocate a fresh huge page. I believe this is
benign, as no memory is leaked (the actual pages are still tracked
correctly) and the counters won't go out of sync.
2) Shrinking the static pool while a surplus is in effect will allow the
number of surplus huge pages to exceed the overcommit value. As long as
this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
Successfully tested on x86_64 with the current libhugetlbfs snapshot,
modified to use the new sysctl.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-18 00:20:12 +00:00
|
|
|
* though, we'll note that we're not allowed to exceed surplus
|
|
|
|
* and won't grow the pool anywhere else. Not until one of the
|
|
|
|
* sysctls are changed, or the surplus pages go out of use.
|
2007-10-16 08:26:18 +00:00
|
|
|
*/
|
2008-07-24 04:27:41 +00:00
|
|
|
min_count = h->resv_huge_pages + h->nr_huge_pages - h->free_huge_pages;
|
2007-10-16 08:26:23 +00:00
|
|
|
min_count = max(count, min_count);
|
2009-12-15 01:58:16 +00:00
|
|
|
try_to_free_low(h, min_count, nodes_allowed);
|
2021-05-05 01:35:03 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Collect pages to be removed on list without dropping lock
|
|
|
|
*/
|
2008-07-24 04:27:41 +00:00
|
|
|
while (min_count < persistent_huge_pages(h)) {
|
2023-08-24 14:13:25 +00:00
|
|
|
folio = remove_pool_hugetlb_folio(h, nodes_allowed, 0);
|
|
|
|
if (!folio)
|
2005-04-16 22:20:36 +00:00
|
|
|
break;
|
2021-05-05 01:35:03 +00:00
|
|
|
|
2023-08-24 14:13:25 +00:00
|
|
|
list_add(&folio->lru, &page_list);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2021-05-05 01:35:03 +00:00
|
|
|
/* free the pages after dropping lock */
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2021-05-05 01:35:03 +00:00
|
|
|
update_and_free_pages_bulk(h, &page_list);
|
2021-07-01 01:47:17 +00:00
|
|
|
flush_free_hpage_work(h);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2021-05-05 01:35:03 +00:00
|
|
|
|
2008-07-24 04:27:41 +00:00
|
|
|
while (count < persistent_huge_pages(h)) {
|
2009-12-15 01:58:16 +00:00
|
|
|
if (!adjust_pool_surplus(h, nodes_allowed, 1))
|
2007-10-16 08:26:18 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
out:
|
2019-05-14 00:19:04 +00:00
|
|
|
h->max_huge_pages = persistent_huge_pages(h);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2021-05-05 01:34:52 +00:00
|
|
|
mutex_unlock(&h->resize_lock);
|
2019-05-14 00:19:04 +00:00
|
|
|
|
2019-09-23 22:37:35 +00:00
|
|
|
NODEMASK_FREE(node_alloc_noretry);
|
|
|
|
|
2019-05-14 00:19:04 +00:00
|
|
|
return 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2023-01-13 22:30:57 +00:00
|
|
|
static int demote_free_hugetlb_folio(struct hstate *h, struct folio *folio)
|
2021-11-05 20:41:33 +00:00
|
|
|
{
|
2023-01-13 22:30:57 +00:00
|
|
|
int i, nid = folio_nid(folio);
|
2021-11-05 20:41:33 +00:00
|
|
|
struct hstate *target_hstate;
|
2022-09-14 19:09:17 +00:00
|
|
|
struct page *subpage;
|
2023-01-13 22:30:57 +00:00
|
|
|
struct folio *inner_folio;
|
2021-11-05 20:41:33 +00:00
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
target_hstate = size_to_hstate(PAGE_SIZE << h->demote_order);
|
|
|
|
|
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
While investigating HVO for THPs [1], it turns out that speculative PFN
walkers like compaction can race with vmemmap modifications, e.g.,
CPU 1 (vmemmap modifier) CPU 2 (speculative PFN walker)
------------------------------- ------------------------------
Allocates an LRU folio page1
Sees page1
Frees page1
Allocates a hugeTLB folio page2
(page1 being a tail of page2)
Updates vmemmap mapping page1
get_page_unless_zero(page1)
Even though page1->_refcount is zero after HVO, get_page_unless_zero() can
still try to modify this read-only field, resulting in a crash.
An independent report [2] confirmed this race.
There are two discussed approaches to fix this race:
1. Make RO vmemmap RW so that get_page_unless_zero() can fail without
triggering a PF.
2. Use RCU to make sure get_page_unless_zero() either sees zero
page->_refcount through the old vmemmap or non-zero page->_refcount
through the new one.
The second approach is preferred here because:
1. It can prevent illegal modifications to struct page[] that has been
HVO'ed;
2. It can be generalized, in a way similar to ZERO_PAGE(), to fix
similar races in other places, e.g., arch_remove_memory() on x86
[3], which frees vmemmap mapping offlined struct page[].
While adding synchronize_rcu(), the goal is to be surgical, rather than
optimized. Specifically, calls to synchronize_rcu() on the error handling
paths can be coalesced, but it is not done for the sake of Simplicity:
noticeably, this fix removes ~50% more lines than it adds.
According to the hugetlb_optimize_vmemmap section in
Documentation/admin-guide/sysctl/vm.rst, enabling HVO makes allocating or
freeing hugeTLB pages "~2x slower than before". Having synchronize_rcu()
on top makes those operations even worse, and this also affects the user
interface /proc/sys/vm/nr_overcommit_hugepages.
This is *very* hard to trigger:
1. Most hugeTLB use cases I know of are static, i.e., reserved at
boot time, because allocating at runtime is not reliable at all.
2. On top of that, someone has to be very unlucky to get tripped
over above, because the race window is so small -- I wasn't able to
trigger it with a stress testing that does nothing but that (with
THPs though).
[1] https://lore.kernel.org/20240229183436.4110845-4-yuzhao@google.com/
[2] https://lore.kernel.org/917FFC7F-0615-44DD-90EE-9F85F8EA9974@linux.dev/
[3] https://lore.kernel.org/be130a96-a27e-4240-ad78-776802f57cad@redhat.com/
Link: https://lkml.kernel.org/r/20240627222705.2974207-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-27 22:27:05 +00:00
|
|
|
remove_hugetlb_folio(h, folio, false);
|
2021-11-05 20:41:33 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
|
2023-08-29 21:37:34 +00:00
|
|
|
/*
|
|
|
|
* If vmemmap already existed for folio, the remove routine above would
|
|
|
|
* have cleared the hugetlb folio flag. Hence the folio is technically
|
2023-10-11 14:45:57 +00:00
|
|
|
* no longer a hugetlb folio. hugetlb_vmemmap_restore_folio can only be
|
2023-08-29 21:37:34 +00:00
|
|
|
* passed hugetlb folios and will BUG otherwise.
|
|
|
|
*/
|
|
|
|
if (folio_test_hugetlb(folio)) {
|
2023-10-11 14:45:57 +00:00
|
|
|
rc = hugetlb_vmemmap_restore_folio(h, folio);
|
2023-08-29 21:37:34 +00:00
|
|
|
if (rc) {
|
|
|
|
/* Allocation of vmemmmap failed, we can not demote folio */
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
|
|
|
add_hugetlb_folio(h, folio, false);
|
|
|
|
return rc;
|
|
|
|
}
|
2021-11-05 20:41:33 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2022-11-29 22:50:31 +00:00
|
|
|
* Use destroy_compound_hugetlb_folio_for_demote for all huge page
|
2023-01-13 22:30:57 +00:00
|
|
|
* sizes as it will not ref count folios.
|
2021-11-05 20:41:33 +00:00
|
|
|
*/
|
2022-11-29 22:50:31 +00:00
|
|
|
destroy_compound_hugetlb_folio_for_demote(folio, huge_page_order(h));
|
2021-11-05 20:41:33 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Taking target hstate mutex synchronizes with set_max_huge_pages.
|
|
|
|
* Without the mutex, pages added to target hstate could be marked
|
|
|
|
* as surplus.
|
|
|
|
*
|
|
|
|
* Note that we already hold h->resize_lock. To prevent deadlock,
|
|
|
|
* use the convention of always taking larger size hstate mutex first.
|
|
|
|
*/
|
|
|
|
mutex_lock(&target_hstate->resize_lock);
|
|
|
|
for (i = 0; i < pages_per_huge_page(h);
|
|
|
|
i += pages_per_huge_page(target_hstate)) {
|
2023-01-13 22:30:57 +00:00
|
|
|
subpage = folio_page(folio, i);
|
|
|
|
inner_folio = page_folio(subpage);
|
2021-11-05 20:41:33 +00:00
|
|
|
if (hstate_is_gigantic(target_hstate))
|
2023-01-13 22:30:57 +00:00
|
|
|
prep_compound_gigantic_folio_for_demote(inner_folio,
|
2021-11-05 20:41:33 +00:00
|
|
|
target_hstate->order);
|
|
|
|
else
|
2022-09-14 19:09:17 +00:00
|
|
|
prep_compound_page(subpage, target_hstate->order);
|
2023-01-13 22:30:57 +00:00
|
|
|
folio_change_private(inner_folio, NULL);
|
|
|
|
prep_new_hugetlb_folio(target_hstate, inner_folio, nid);
|
2023-08-16 15:11:51 +00:00
|
|
|
free_huge_folio(inner_folio);
|
2021-11-05 20:41:33 +00:00
|
|
|
}
|
|
|
|
mutex_unlock(&target_hstate->resize_lock);
|
|
|
|
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Not absolutely necessary, but for consistency update max_huge_pages
|
|
|
|
* based on pool changes for the demoted page.
|
|
|
|
*/
|
|
|
|
h->max_huge_pages--;
|
2022-08-16 13:05:48 +00:00
|
|
|
target_hstate->max_huge_pages +=
|
|
|
|
pages_per_huge_page(h) / pages_per_huge_page(target_hstate);
|
2021-11-05 20:41:33 +00:00
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
static int demote_pool_huge_page(struct hstate *h, nodemask_t *nodes_allowed)
|
|
|
|
__must_hold(&hugetlb_lock)
|
|
|
|
{
|
2021-11-05 20:41:33 +00:00
|
|
|
int nr_nodes, node;
|
2023-01-13 22:30:57 +00:00
|
|
|
struct folio *folio;
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
|
|
|
|
lockdep_assert_held(&hugetlb_lock);
|
|
|
|
|
|
|
|
/* We should never get here if no demote order */
|
|
|
|
if (!h->demote_order) {
|
|
|
|
pr_warn("HugeTLB: NULL demote order passed to demote_pool_huge_page.\n");
|
|
|
|
return -EINVAL; /* internal error */
|
|
|
|
}
|
|
|
|
|
2021-11-05 20:41:33 +00:00
|
|
|
for_each_node_mask_to_free(h, nr_nodes, node, nodes_allowed) {
|
2023-01-13 22:30:57 +00:00
|
|
|
list_for_each_entry(folio, &h->hugepage_freelists[node], lru) {
|
|
|
|
if (folio_test_hwpoison(folio))
|
2022-04-15 02:13:52 +00:00
|
|
|
continue;
|
2023-01-13 22:30:57 +00:00
|
|
|
return demote_free_hugetlb_folio(h, folio);
|
2021-11-05 20:41:33 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2022-04-15 02:13:52 +00:00
|
|
|
/*
|
|
|
|
* Only way to get here is if all pages on free lists are poisoned.
|
|
|
|
* Return -EBUSY so that caller will not retry.
|
|
|
|
*/
|
|
|
|
return -EBUSY;
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
#define HSTATE_ATTR_RO(_name) \
|
|
|
|
static struct kobj_attribute _name##_attr = __ATTR_RO(_name)
|
|
|
|
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
#define HSTATE_ATTR_WO(_name) \
|
|
|
|
static struct kobj_attribute _name##_attr = __ATTR_WO(_name)
|
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
#define HSTATE_ATTR(_name) \
|
2022-03-22 21:45:23 +00:00
|
|
|
static struct kobj_attribute _name##_attr = __ATTR_RW(_name)
|
2008-07-24 04:27:44 +00:00
|
|
|
|
|
|
|
static struct kobject *hugepages_kobj;
|
|
|
|
static struct kobject *hstate_kobjs[HUGE_MAX_HSTATE];
|
|
|
|
|
2009-12-15 01:58:25 +00:00
|
|
|
static struct hstate *kobj_to_node_hstate(struct kobject *kobj, int *nidp);
|
|
|
|
|
|
|
|
static struct hstate *kobj_to_hstate(struct kobject *kobj, int *nidp)
|
2008-07-24 04:27:44 +00:00
|
|
|
{
|
|
|
|
int i;
|
2009-12-15 01:58:25 +00:00
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
for (i = 0; i < HUGE_MAX_HSTATE; i++)
|
2009-12-15 01:58:25 +00:00
|
|
|
if (hstate_kobjs[i] == kobj) {
|
|
|
|
if (nidp)
|
|
|
|
*nidp = NUMA_NO_NODE;
|
2008-07-24 04:27:44 +00:00
|
|
|
return &hstates[i];
|
2009-12-15 01:58:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return kobj_to_node_hstate(kobj, nidp);
|
2008-07-24 04:27:44 +00:00
|
|
|
}
|
|
|
|
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
static ssize_t nr_hugepages_show_common(struct kobject *kobj,
|
2008-07-24 04:27:44 +00:00
|
|
|
struct kobj_attribute *attr, char *buf)
|
|
|
|
{
|
2009-12-15 01:58:25 +00:00
|
|
|
struct hstate *h;
|
|
|
|
unsigned long nr_huge_pages;
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
h = kobj_to_hstate(kobj, &nid);
|
|
|
|
if (nid == NUMA_NO_NODE)
|
|
|
|
nr_huge_pages = h->nr_huge_pages;
|
|
|
|
else
|
|
|
|
nr_huge_pages = h->nr_huge_pages_node[nid];
|
|
|
|
|
2020-12-15 03:14:42 +00:00
|
|
|
return sysfs_emit(buf, "%lu\n", nr_huge_pages);
|
2008-07-24 04:27:44 +00:00
|
|
|
}
|
2011-01-13 23:47:27 +00:00
|
|
|
|
2014-08-06 23:06:51 +00:00
|
|
|
static ssize_t __nr_hugepages_store_common(bool obey_mempolicy,
|
|
|
|
struct hstate *h, int nid,
|
|
|
|
unsigned long count, size_t len)
|
2008-07-24 04:27:44 +00:00
|
|
|
{
|
|
|
|
int err;
|
2019-05-14 00:19:23 +00:00
|
|
|
nodemask_t nodes_allowed, *n_mask;
|
2008-07-24 04:27:44 +00:00
|
|
|
|
2019-05-14 00:19:23 +00:00
|
|
|
if (hstate_is_gigantic(h) && !gigantic_page_runtime_supported())
|
|
|
|
return -EINVAL;
|
2011-01-13 23:47:27 +00:00
|
|
|
|
2009-12-15 01:58:25 +00:00
|
|
|
if (nid == NUMA_NO_NODE) {
|
|
|
|
/*
|
|
|
|
* global hstate attribute
|
|
|
|
*/
|
|
|
|
if (!(obey_mempolicy &&
|
2019-05-14 00:19:23 +00:00
|
|
|
init_nodemask_of_mempolicy(&nodes_allowed)))
|
|
|
|
n_mask = &node_states[N_MEMORY];
|
|
|
|
else
|
|
|
|
n_mask = &nodes_allowed;
|
|
|
|
} else {
|
2009-12-15 01:58:25 +00:00
|
|
|
/*
|
2019-05-14 00:19:20 +00:00
|
|
|
* Node specific request. count adjustment happens in
|
|
|
|
* set_max_huge_pages() after acquiring hugetlb_lock.
|
2009-12-15 01:58:25 +00:00
|
|
|
*/
|
2019-05-14 00:19:23 +00:00
|
|
|
init_nodemask_of_node(&nodes_allowed, nid);
|
|
|
|
n_mask = &nodes_allowed;
|
2019-05-14 00:19:20 +00:00
|
|
|
}
|
2009-12-15 01:58:25 +00:00
|
|
|
|
2019-05-14 00:19:23 +00:00
|
|
|
err = set_max_huge_pages(h, count, nid, n_mask);
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
|
2019-05-14 00:19:04 +00:00
|
|
|
return err ? err : len;
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
}
|
|
|
|
|
2014-08-06 23:06:51 +00:00
|
|
|
static ssize_t nr_hugepages_store_common(bool obey_mempolicy,
|
|
|
|
struct kobject *kobj, const char *buf,
|
|
|
|
size_t len)
|
|
|
|
{
|
|
|
|
struct hstate *h;
|
|
|
|
unsigned long count;
|
|
|
|
int nid;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = kstrtoul(buf, 10, &count);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
h = kobj_to_hstate(kobj, &nid);
|
|
|
|
return __nr_hugepages_store_common(obey_mempolicy, h, nid, count, len);
|
|
|
|
}
|
|
|
|
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
static ssize_t nr_hugepages_show(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
return nr_hugepages_show_common(kobj, attr, buf);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t nr_hugepages_store(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, const char *buf, size_t len)
|
|
|
|
{
|
2014-08-06 23:06:51 +00:00
|
|
|
return nr_hugepages_store_common(false, kobj, buf, len);
|
2008-07-24 04:27:44 +00:00
|
|
|
}
|
|
|
|
HSTATE_ATTR(nr_hugepages);
|
|
|
|
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
|
|
|
|
/*
|
|
|
|
* hstate attribute for optionally mempolicy-based constraint on persistent
|
|
|
|
* huge page alloc/free.
|
|
|
|
*/
|
|
|
|
static ssize_t nr_hugepages_mempolicy_show(struct kobject *kobj,
|
2020-12-15 03:14:42 +00:00
|
|
|
struct kobj_attribute *attr,
|
|
|
|
char *buf)
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
{
|
|
|
|
return nr_hugepages_show_common(kobj, attr, buf);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t nr_hugepages_mempolicy_store(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, const char *buf, size_t len)
|
|
|
|
{
|
2014-08-06 23:06:51 +00:00
|
|
|
return nr_hugepages_store_common(true, kobj, buf, len);
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
}
|
|
|
|
HSTATE_ATTR(nr_hugepages_mempolicy);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
static ssize_t nr_overcommit_hugepages_show(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, char *buf)
|
|
|
|
{
|
2009-12-15 01:58:25 +00:00
|
|
|
struct hstate *h = kobj_to_hstate(kobj, NULL);
|
2020-12-15 03:14:42 +00:00
|
|
|
return sysfs_emit(buf, "%lu\n", h->nr_overcommit_huge_pages);
|
2008-07-24 04:27:44 +00:00
|
|
|
}
|
2011-01-13 23:47:27 +00:00
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
static ssize_t nr_overcommit_hugepages_store(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
unsigned long input;
|
2009-12-15 01:58:25 +00:00
|
|
|
struct hstate *h = kobj_to_hstate(kobj, NULL);
|
2008-07-24 04:27:44 +00:00
|
|
|
|
2014-06-04 23:07:08 +00:00
|
|
|
if (hstate_is_gigantic(h))
|
2011-01-13 23:47:27 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2013-09-11 21:20:25 +00:00
|
|
|
err = kstrtoul(buf, 10, &input);
|
2008-07-24 04:27:44 +00:00
|
|
|
if (err)
|
2011-01-13 23:47:28 +00:00
|
|
|
return err;
|
2008-07-24 04:27:44 +00:00
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2008-07-24 04:27:44 +00:00
|
|
|
h->nr_overcommit_huge_pages = input;
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2008-07-24 04:27:44 +00:00
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
HSTATE_ATTR(nr_overcommit_hugepages);
|
|
|
|
|
|
|
|
static ssize_t free_hugepages_show(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, char *buf)
|
|
|
|
{
|
2009-12-15 01:58:25 +00:00
|
|
|
struct hstate *h;
|
|
|
|
unsigned long free_huge_pages;
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
h = kobj_to_hstate(kobj, &nid);
|
|
|
|
if (nid == NUMA_NO_NODE)
|
|
|
|
free_huge_pages = h->free_huge_pages;
|
|
|
|
else
|
|
|
|
free_huge_pages = h->free_huge_pages_node[nid];
|
|
|
|
|
2020-12-15 03:14:42 +00:00
|
|
|
return sysfs_emit(buf, "%lu\n", free_huge_pages);
|
2008-07-24 04:27:44 +00:00
|
|
|
}
|
|
|
|
HSTATE_ATTR_RO(free_hugepages);
|
|
|
|
|
|
|
|
static ssize_t resv_hugepages_show(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, char *buf)
|
|
|
|
{
|
2009-12-15 01:58:25 +00:00
|
|
|
struct hstate *h = kobj_to_hstate(kobj, NULL);
|
2020-12-15 03:14:42 +00:00
|
|
|
return sysfs_emit(buf, "%lu\n", h->resv_huge_pages);
|
2008-07-24 04:27:44 +00:00
|
|
|
}
|
|
|
|
HSTATE_ATTR_RO(resv_hugepages);
|
|
|
|
|
|
|
|
static ssize_t surplus_hugepages_show(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, char *buf)
|
|
|
|
{
|
2009-12-15 01:58:25 +00:00
|
|
|
struct hstate *h;
|
|
|
|
unsigned long surplus_huge_pages;
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
h = kobj_to_hstate(kobj, &nid);
|
|
|
|
if (nid == NUMA_NO_NODE)
|
|
|
|
surplus_huge_pages = h->surplus_huge_pages;
|
|
|
|
else
|
|
|
|
surplus_huge_pages = h->surplus_huge_pages_node[nid];
|
|
|
|
|
2020-12-15 03:14:42 +00:00
|
|
|
return sysfs_emit(buf, "%lu\n", surplus_huge_pages);
|
2008-07-24 04:27:44 +00:00
|
|
|
}
|
|
|
|
HSTATE_ATTR_RO(surplus_hugepages);
|
|
|
|
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
static ssize_t demote_store(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, const char *buf, size_t len)
|
|
|
|
{
|
|
|
|
unsigned long nr_demote;
|
|
|
|
unsigned long nr_available;
|
|
|
|
nodemask_t nodes_allowed, *n_mask;
|
|
|
|
struct hstate *h;
|
2022-09-05 02:09:18 +00:00
|
|
|
int err;
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
int nid;
|
|
|
|
|
|
|
|
err = kstrtoul(buf, 10, &nr_demote);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
h = kobj_to_hstate(kobj, &nid);
|
|
|
|
|
|
|
|
if (nid != NUMA_NO_NODE) {
|
|
|
|
init_nodemask_of_node(&nodes_allowed, nid);
|
|
|
|
n_mask = &nodes_allowed;
|
|
|
|
} else {
|
|
|
|
n_mask = &node_states[N_MEMORY];
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Synchronize with other sysfs operations modifying huge pages */
|
|
|
|
mutex_lock(&h->resize_lock);
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
|
|
|
|
|
|
|
while (nr_demote) {
|
|
|
|
/*
|
|
|
|
* Check for available pages to demote each time thorough the
|
|
|
|
* loop as demote_pool_huge_page will drop hugetlb_lock.
|
|
|
|
*/
|
|
|
|
if (nid != NUMA_NO_NODE)
|
|
|
|
nr_available = h->free_huge_pages_node[nid];
|
|
|
|
else
|
|
|
|
nr_available = h->free_huge_pages;
|
|
|
|
nr_available -= h->resv_huge_pages;
|
|
|
|
if (!nr_available)
|
|
|
|
break;
|
|
|
|
|
|
|
|
err = demote_pool_huge_page(h, n_mask);
|
|
|
|
if (err)
|
|
|
|
break;
|
|
|
|
|
|
|
|
nr_demote--;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
mutex_unlock(&h->resize_lock);
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
HSTATE_ATTR_WO(demote);
|
|
|
|
|
|
|
|
static ssize_t demote_size_show(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, char *buf)
|
|
|
|
{
|
2022-09-01 12:00:26 +00:00
|
|
|
struct hstate *h = kobj_to_hstate(kobj, NULL);
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
unsigned long demote_size = (PAGE_SIZE << h->demote_order) / SZ_1K;
|
|
|
|
|
|
|
|
return sysfs_emit(buf, "%lukB\n", demote_size);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t demote_size_store(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
struct hstate *h, *demote_hstate;
|
|
|
|
unsigned long demote_size;
|
|
|
|
unsigned int demote_order;
|
|
|
|
|
|
|
|
demote_size = (unsigned long)memparse(buf, NULL);
|
|
|
|
|
|
|
|
demote_hstate = size_to_hstate(demote_size);
|
|
|
|
if (!demote_hstate)
|
|
|
|
return -EINVAL;
|
|
|
|
demote_order = demote_hstate->order;
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
if (demote_order < HUGETLB_PAGE_ORDER)
|
|
|
|
return -EINVAL;
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
|
|
|
|
/* demote order must be smaller than hstate order */
|
2022-09-01 12:00:26 +00:00
|
|
|
h = kobj_to_hstate(kobj, NULL);
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
if (demote_order >= h->order)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* resize_lock synchronizes access to demote size and writes */
|
|
|
|
mutex_lock(&h->resize_lock);
|
|
|
|
h->demote_order = demote_order;
|
|
|
|
mutex_unlock(&h->resize_lock);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
HSTATE_ATTR(demote_size);
|
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
static struct attribute *hstate_attrs[] = {
|
|
|
|
&nr_hugepages_attr.attr,
|
|
|
|
&nr_overcommit_hugepages_attr.attr,
|
|
|
|
&free_hugepages_attr.attr,
|
|
|
|
&resv_hugepages_attr.attr,
|
|
|
|
&surplus_hugepages_attr.attr,
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
&nr_hugepages_mempolicy_attr.attr,
|
|
|
|
#endif
|
2008-07-24 04:27:44 +00:00
|
|
|
NULL,
|
|
|
|
};
|
|
|
|
|
2017-09-06 23:22:06 +00:00
|
|
|
static const struct attribute_group hstate_attr_group = {
|
2008-07-24 04:27:44 +00:00
|
|
|
.attrs = hstate_attrs,
|
|
|
|
};
|
|
|
|
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
static struct attribute *hstate_demote_attrs[] = {
|
|
|
|
&demote_size_attr.attr,
|
|
|
|
&demote_attr.attr,
|
|
|
|
NULL,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct attribute_group hstate_demote_attr_group = {
|
|
|
|
.attrs = hstate_demote_attrs,
|
|
|
|
};
|
|
|
|
|
2010-02-02 21:44:14 +00:00
|
|
|
static int hugetlb_sysfs_add_hstate(struct hstate *h, struct kobject *parent,
|
|
|
|
struct kobject **hstate_kobjs,
|
2017-09-06 23:22:06 +00:00
|
|
|
const struct attribute_group *hstate_attr_group)
|
2008-07-24 04:27:44 +00:00
|
|
|
{
|
|
|
|
int retval;
|
2012-07-31 23:42:00 +00:00
|
|
|
int hi = hstate_index(h);
|
2008-07-24 04:27:44 +00:00
|
|
|
|
2009-12-15 01:58:25 +00:00
|
|
|
hstate_kobjs[hi] = kobject_create_and_add(h->name, parent);
|
|
|
|
if (!hstate_kobjs[hi])
|
2008-07-24 04:27:44 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
|
2009-12-15 01:58:25 +00:00
|
|
|
retval = sysfs_create_group(hstate_kobjs[hi], hstate_attr_group);
|
2021-02-24 20:06:50 +00:00
|
|
|
if (retval) {
|
2009-12-15 01:58:25 +00:00
|
|
|
kobject_put(hstate_kobjs[hi]);
|
2021-02-24 20:06:50 +00:00
|
|
|
hstate_kobjs[hi] = NULL;
|
2022-08-16 13:05:49 +00:00
|
|
|
return retval;
|
2021-02-24 20:06:50 +00:00
|
|
|
}
|
2008-07-24 04:27:44 +00:00
|
|
|
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
if (h->demote_order) {
|
2022-08-16 13:05:52 +00:00
|
|
|
retval = sysfs_create_group(hstate_kobjs[hi],
|
|
|
|
&hstate_demote_attr_group);
|
|
|
|
if (retval) {
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
pr_warn("HugeTLB unable to create demote interfaces for %s\n", h->name);
|
2022-08-16 13:05:52 +00:00
|
|
|
sysfs_remove_group(hstate_kobjs[hi], hstate_attr_group);
|
|
|
|
kobject_put(hstate_kobjs[hi]);
|
|
|
|
hstate_kobjs[hi] = NULL;
|
|
|
|
return retval;
|
|
|
|
}
|
hugetlb: add demote hugetlb page sysfs interfaces
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:20 +00:00
|
|
|
}
|
|
|
|
|
2022-08-16 13:05:52 +00:00
|
|
|
return 0;
|
2008-07-24 04:27:44 +00:00
|
|
|
}
|
|
|
|
|
2009-12-15 01:58:25 +00:00
|
|
|
#ifdef CONFIG_NUMA
|
2022-09-14 07:26:03 +00:00
|
|
|
static bool hugetlb_sysfs_initialized __ro_after_init;
|
2009-12-15 01:58:25 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* node_hstate/s - associate per node hstate attributes, via their kobjects,
|
2011-12-21 22:48:43 +00:00
|
|
|
* with node devices in node_devices[] using a parallel array. The array
|
|
|
|
* index of a node device or _hstate == node id.
|
|
|
|
* This is here to avoid any static dependency of the node device driver, in
|
2009-12-15 01:58:25 +00:00
|
|
|
* the base kernel, on the hugetlb module.
|
|
|
|
*/
|
|
|
|
struct node_hstate {
|
|
|
|
struct kobject *hugepages_kobj;
|
|
|
|
struct kobject *hstate_kobjs[HUGE_MAX_HSTATE];
|
|
|
|
};
|
2015-11-06 02:50:14 +00:00
|
|
|
static struct node_hstate node_hstates[MAX_NUMNODES];
|
2009-12-15 01:58:25 +00:00
|
|
|
|
|
|
|
/*
|
2011-12-21 22:48:43 +00:00
|
|
|
* A subset of global hstate attributes for node devices
|
2009-12-15 01:58:25 +00:00
|
|
|
*/
|
|
|
|
static struct attribute *per_node_hstate_attrs[] = {
|
|
|
|
&nr_hugepages_attr.attr,
|
|
|
|
&free_hugepages_attr.attr,
|
|
|
|
&surplus_hugepages_attr.attr,
|
|
|
|
NULL,
|
|
|
|
};
|
|
|
|
|
2017-09-06 23:22:06 +00:00
|
|
|
static const struct attribute_group per_node_hstate_attr_group = {
|
2009-12-15 01:58:25 +00:00
|
|
|
.attrs = per_node_hstate_attrs,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
2011-12-21 22:48:43 +00:00
|
|
|
* kobj_to_node_hstate - lookup global hstate for node device hstate attr kobj.
|
2009-12-15 01:58:25 +00:00
|
|
|
* Returns node id via non-NULL nidp.
|
|
|
|
*/
|
|
|
|
static struct hstate *kobj_to_node_hstate(struct kobject *kobj, int *nidp)
|
|
|
|
{
|
|
|
|
int nid;
|
|
|
|
|
|
|
|
for (nid = 0; nid < nr_node_ids; nid++) {
|
|
|
|
struct node_hstate *nhs = &node_hstates[nid];
|
|
|
|
int i;
|
|
|
|
for (i = 0; i < HUGE_MAX_HSTATE; i++)
|
|
|
|
if (nhs->hstate_kobjs[i] == kobj) {
|
|
|
|
if (nidp)
|
|
|
|
*nidp = nid;
|
|
|
|
return &hstates[i];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
BUG();
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2011-12-21 22:48:43 +00:00
|
|
|
* Unregister hstate attributes from a single node device.
|
2009-12-15 01:58:25 +00:00
|
|
|
* No-op if no hstate attributes attached.
|
|
|
|
*/
|
2022-09-14 07:26:03 +00:00
|
|
|
void hugetlb_unregister_node(struct node *node)
|
2009-12-15 01:58:25 +00:00
|
|
|
{
|
|
|
|
struct hstate *h;
|
2011-12-21 22:48:43 +00:00
|
|
|
struct node_hstate *nhs = &node_hstates[node->dev.id];
|
2009-12-15 01:58:25 +00:00
|
|
|
|
|
|
|
if (!nhs->hugepages_kobj)
|
2009-12-15 01:58:32 +00:00
|
|
|
return; /* no hstate attributes */
|
2009-12-15 01:58:25 +00:00
|
|
|
|
2012-07-31 23:42:00 +00:00
|
|
|
for_each_hstate(h) {
|
|
|
|
int idx = hstate_index(h);
|
2022-08-16 13:05:52 +00:00
|
|
|
struct kobject *hstate_kobj = nhs->hstate_kobjs[idx];
|
|
|
|
|
|
|
|
if (!hstate_kobj)
|
|
|
|
continue;
|
|
|
|
if (h->demote_order)
|
|
|
|
sysfs_remove_group(hstate_kobj, &hstate_demote_attr_group);
|
|
|
|
sysfs_remove_group(hstate_kobj, &per_node_hstate_attr_group);
|
|
|
|
kobject_put(hstate_kobj);
|
|
|
|
nhs->hstate_kobjs[idx] = NULL;
|
2012-07-31 23:42:00 +00:00
|
|
|
}
|
2009-12-15 01:58:25 +00:00
|
|
|
|
|
|
|
kobject_put(nhs->hugepages_kobj);
|
|
|
|
nhs->hugepages_kobj = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
2011-12-21 22:48:43 +00:00
|
|
|
* Register hstate attributes for a single node device.
|
2009-12-15 01:58:25 +00:00
|
|
|
* No-op if attributes already registered.
|
|
|
|
*/
|
2022-09-14 07:26:03 +00:00
|
|
|
void hugetlb_register_node(struct node *node)
|
2009-12-15 01:58:25 +00:00
|
|
|
{
|
|
|
|
struct hstate *h;
|
2011-12-21 22:48:43 +00:00
|
|
|
struct node_hstate *nhs = &node_hstates[node->dev.id];
|
2009-12-15 01:58:25 +00:00
|
|
|
int err;
|
|
|
|
|
2022-09-14 07:26:03 +00:00
|
|
|
if (!hugetlb_sysfs_initialized)
|
|
|
|
return;
|
|
|
|
|
2009-12-15 01:58:25 +00:00
|
|
|
if (nhs->hugepages_kobj)
|
|
|
|
return; /* already allocated */
|
|
|
|
|
|
|
|
nhs->hugepages_kobj = kobject_create_and_add("hugepages",
|
2011-12-21 22:48:43 +00:00
|
|
|
&node->dev.kobj);
|
2009-12-15 01:58:25 +00:00
|
|
|
if (!nhs->hugepages_kobj)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for_each_hstate(h) {
|
|
|
|
err = hugetlb_sysfs_add_hstate(h, nhs->hugepages_kobj,
|
|
|
|
nhs->hstate_kobjs,
|
|
|
|
&per_node_hstate_attr_group);
|
|
|
|
if (err) {
|
2020-06-03 23:00:46 +00:00
|
|
|
pr_err("HugeTLB: Unable to add hstate %s for node %d\n",
|
2013-02-23 00:32:08 +00:00
|
|
|
h->name, node->dev.id);
|
2009-12-15 01:58:25 +00:00
|
|
|
hugetlb_unregister_node(node);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2009-12-15 01:58:32 +00:00
|
|
|
* hugetlb init time: register hstate attributes for all registered node
|
2011-12-21 22:48:43 +00:00
|
|
|
* devices of nodes that have memory. All on-line nodes should have
|
|
|
|
* registered their associated device by this time.
|
2009-12-15 01:58:25 +00:00
|
|
|
*/
|
2014-12-13 00:55:24 +00:00
|
|
|
static void __init hugetlb_register_all_nodes(void)
|
2009-12-15 01:58:25 +00:00
|
|
|
{
|
|
|
|
int nid;
|
|
|
|
|
2022-09-14 07:26:03 +00:00
|
|
|
for_each_online_node(nid)
|
2022-09-14 07:26:02 +00:00
|
|
|
hugetlb_register_node(node_devices[nid]);
|
2009-12-15 01:58:25 +00:00
|
|
|
}
|
|
|
|
#else /* !CONFIG_NUMA */
|
|
|
|
|
|
|
|
static struct hstate *kobj_to_node_hstate(struct kobject *kobj, int *nidp)
|
|
|
|
{
|
|
|
|
BUG();
|
|
|
|
if (nidp)
|
|
|
|
*nidp = -1;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void hugetlb_register_all_nodes(void) { }
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
2022-09-01 12:00:21 +00:00
|
|
|
#ifdef CONFIG_CMA
|
|
|
|
static void __init hugetlb_cma_check(void);
|
|
|
|
#else
|
|
|
|
static inline __init void hugetlb_cma_check(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2022-09-14 07:26:03 +00:00
|
|
|
static void __init hugetlb_sysfs_init(void)
|
|
|
|
{
|
|
|
|
struct hstate *h;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
hugepages_kobj = kobject_create_and_add("hugepages", mm_kobj);
|
|
|
|
if (!hugepages_kobj)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for_each_hstate(h) {
|
|
|
|
err = hugetlb_sysfs_add_hstate(h, hugepages_kobj,
|
|
|
|
hstate_kobjs, &hstate_attr_group);
|
|
|
|
if (err)
|
|
|
|
pr_err("HugeTLB: Unable to add hstate %s", h->name);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
hugetlb_sysfs_initialized = true;
|
|
|
|
#endif
|
|
|
|
hugetlb_register_all_nodes();
|
|
|
|
}
|
|
|
|
|
2023-03-09 12:20:11 +00:00
|
|
|
#ifdef CONFIG_SYSCTL
|
|
|
|
static void hugetlb_sysctl_init(void);
|
|
|
|
#else
|
|
|
|
static inline void hugetlb_sysctl_init(void) { }
|
|
|
|
#endif
|
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
static int __init hugetlb_init(void)
|
|
|
|
{
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
int i;
|
|
|
|
|
hugetlb: use page.private for hugetlb specific page flags
Patch series "create hugetlb flags to consolidate state", v3.
While discussing a series of hugetlb fixes in [1], it became evident that
the hugetlb specific page state information is stored in a somewhat
haphazard manner. Code dealing with state information would be easier to
read, understand and maintain if this information was stored in a
consistent manner.
This series uses page.private of the hugetlb head page for storing a set
of hugetlb specific page flags. Routines are priovided for test, set and
clear of the flags.
[1] https://lore.kernel.org/r/20210106084739.63318-1-songmuchun@bytedance.com
This patch (of 4):
As hugetlbfs evolved, state information about hugetlb pages was added.
One 'convenient' way of doing this was to use available fields in tail
pages. Over time, it has become difficult to know the meaning or contents
of fields simply by looking at a small bit of code. Sometimes, the naming
is just confusing. For example: The PagePrivate flag indicates a huge
page reservation was consumed and needs to be restored if an error is
encountered and the page is freed before it is instantiated. The
page.private field contains the pointer to a subpool if the page is
associated with one.
In an effort to make the code more readable, use page.private to contain
hugetlb specific page flags. These flags will have test, set and clear
functions similar to those used for 'normal' page flags. More
importantly, an enum of flag values will be created with names that
actually reflect their purpose.
In this patch,
- Create infrastructure for hugetlb specific page flag functions
- Move subpool pointer to page[1].private to make way for flags
Create routines with meaningful names to modify subpool field
- Use new HPageRestoreReserve flag instead of PagePrivate
Conversion of other state information will happen in subsequent patches.
Link: https://lkml.kernel.org/r/20210122195231.324857-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20210122195231.324857-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 20:08:51 +00:00
|
|
|
BUILD_BUG_ON(sizeof_field(struct page, private) * BITS_PER_BYTE <
|
|
|
|
__NR_HPAGEFLAGS);
|
|
|
|
|
2020-06-03 23:00:50 +00:00
|
|
|
if (!hugepages_supported()) {
|
|
|
|
if (hugetlb_max_hstate || default_hstate_max_huge_pages)
|
|
|
|
pr_warn("HugeTLB: huge pages not supported, ignoring associated command-line parameters\n");
|
2008-07-31 07:07:30 +00:00
|
|
|
return 0;
|
2020-06-03 23:00:50 +00:00
|
|
|
}
|
2008-07-24 04:27:44 +00:00
|
|
|
|
2020-06-03 23:00:46 +00:00
|
|
|
/*
|
|
|
|
* Make sure HPAGE_SIZE (HUGETLB_PAGE_ORDER) hstate exists. Some
|
|
|
|
* architectures depend on setup being done here.
|
|
|
|
*/
|
|
|
|
hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
|
|
|
|
if (!parsed_default_hugepagesz) {
|
|
|
|
/*
|
|
|
|
* If we did not parse a default huge page size, set
|
|
|
|
* default_hstate_idx to HPAGE_SIZE hstate. And, if the
|
|
|
|
* number of huge pages for this default size was implicitly
|
|
|
|
* specified, set that here as well.
|
|
|
|
* Note that the implicit setting will overwrite an explicit
|
|
|
|
* setting. A warning will be printed in this case.
|
|
|
|
*/
|
|
|
|
default_hstate_idx = hstate_index(size_to_hstate(HPAGE_SIZE));
|
|
|
|
if (default_hstate_max_huge_pages) {
|
|
|
|
if (default_hstate.max_huge_pages) {
|
|
|
|
char buf[32];
|
|
|
|
|
|
|
|
string_get_size(huge_page_size(&default_hstate),
|
|
|
|
1, STRING_UNITS_2, buf, 32);
|
|
|
|
pr_warn("HugeTLB: Ignoring hugepages=%lu associated with %s page size\n",
|
|
|
|
default_hstate.max_huge_pages, buf);
|
|
|
|
pr_warn("HugeTLB: Using hugepages=%lu for number of default huge pages\n",
|
|
|
|
default_hstate_max_huge_pages);
|
|
|
|
}
|
|
|
|
default_hstate.max_huge_pages =
|
|
|
|
default_hstate_max_huge_pages;
|
2021-11-05 20:43:28 +00:00
|
|
|
|
2022-04-29 21:36:57 +00:00
|
|
|
for_each_online_node(i)
|
2021-11-05 20:43:28 +00:00
|
|
|
default_hstate.max_huge_pages_node[i] =
|
|
|
|
default_hugepages_in_node[i];
|
mm/hugetlb.c: warn the user when issues arise on boot due to hugepages
When the user specifies too many hugepages or an invalid
default_hugepagesz the communication to the user is implicit in the
allocation message. This patch adds a warning when the desired page
count is not allocated and prints an error when the default_hugepagesz
is invalid on boot.
During boot hugepages will allocate until there is a fraction of the
hugepage size left. That is, we allocate until either the request is
satisfied or memory for the pages is exhausted. When memory for the
pages is exhausted, it will most likely lead to the system failing with
the OOM manager not finding enough (or anything) to kill (unless you're
using really big hugepages in the order of 100s of MB or in the GBs).
The user will most likely see the OOM messages much later in the boot
sequence than the implicitly stated message. Worse yet, you may even
get an OOM for each processor which causes many pages of OOMs on modern
systems. Although these messages will be printed earlier than the OOM
messages, at least giving the user errors and warnings will highlight
the configuration as an issue. I'm trying to point the user in the
right direction by providing a more robust statement of what is failing.
During the sysctl or echo command, the user can check the results much
easier than if the system hangs during boot and the scenario of having
nothing to OOM for kernel memory is highly unlikely.
Mike said:
"Before sending out this patch, I asked Liam off list why he was doing
it. Was it something he just thought would be useful? Or, was there
some type of user situation/need. He said that he had been called in
to assist on several occasions when a system OOMed during boot. In
almost all of these situations, the user had grossly misconfigured
huge pages.
DB users want to pre-allocate just the right amount of huge pages, but
sometimes they can be really off. In such situations, the huge page
init code just allocates as many huge pages as it can and reports the
number allocated. There is no indication that it quit allocating
because it ran out of memory. Of course, a user could compare the
number in the message to what they requested on the command line to
determine if they got all the huge pages they requested. The thought
was that it would be useful to at least flag this situation. That way,
the user might be able to better relate the huge page allocation
failure to the OOM.
I'm not sure if the e-mail discussion made it obvious that this is
something he has seen on several occasions.
I see Michal's point that this will only flag the situation where
someone configures huge pages very badly. And, a more extensive look
at the situation of misconfiguring huge pages might be in order. But,
this has happened on several occasions which led to the creation of
this patch"
[akpm@linux-foundation.org: reposition memfmt() to avoid forward declaration]
Link: http://lkml.kernel.org/r/20170603005413.10380-1-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: zhongjiang <zhongjiang@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 22:48:15 +00:00
|
|
|
}
|
2016-02-17 21:11:26 +00:00
|
|
|
}
|
2008-07-24 04:27:44 +00:00
|
|
|
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
hugetlb_cma_check();
|
2008-07-24 04:27:44 +00:00
|
|
|
hugetlb_init_hstates();
|
2008-07-24 04:27:47 +00:00
|
|
|
gather_bootmem_prealloc();
|
2008-07-24 04:27:44 +00:00
|
|
|
report_hugepages();
|
|
|
|
|
|
|
|
hugetlb_sysfs_init();
|
2012-12-18 22:23:19 +00:00
|
|
|
hugetlb_cgroup_file_init();
|
2023-03-09 12:20:11 +00:00
|
|
|
hugetlb_sysctl_init();
|
2009-12-15 01:58:25 +00:00
|
|
|
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
num_fault_mutexes = roundup_pow_of_two(8 * num_possible_cpus());
|
|
|
|
#else
|
|
|
|
num_fault_mutexes = 1;
|
|
|
|
#endif
|
2015-09-08 22:01:35 +00:00
|
|
|
hugetlb_fault_mutex_table =
|
treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:
kmalloc(a * b, gfp)
with:
kmalloc_array(a * b, gfp)
as well as handling cases of:
kmalloc(a * b * c, gfp)
with:
kmalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kmalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kmalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kmalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kmalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kmalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kmalloc
+ kmalloc_array
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kmalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kmalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kmalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kmalloc(sizeof(THING) * C2, ...)
|
kmalloc(sizeof(TYPE) * C2, ...)
|
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * E2
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 20:55:00 +00:00
|
|
|
kmalloc_array(num_fault_mutexes, sizeof(struct mutex),
|
|
|
|
GFP_KERNEL);
|
2015-09-08 22:01:35 +00:00
|
|
|
BUG_ON(!hugetlb_fault_mutex_table);
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
|
|
|
|
for (i = 0; i < num_fault_mutexes; i++)
|
2015-09-08 22:01:35 +00:00
|
|
|
mutex_init(&hugetlb_fault_mutex_table[i]);
|
2008-07-24 04:27:44 +00:00
|
|
|
return 0;
|
|
|
|
}
|
2016-01-14 23:21:52 +00:00
|
|
|
subsys_initcall(hugetlb_init);
|
2008-07-24 04:27:44 +00:00
|
|
|
|
2020-06-03 23:00:34 +00:00
|
|
|
/* Overwritten by architectures with more huge page sizes */
|
|
|
|
bool __init __attribute((weak)) arch_hugetlb_valid_size(unsigned long size)
|
2016-05-20 00:11:04 +00:00
|
|
|
{
|
2020-06-03 23:00:34 +00:00
|
|
|
return size == HPAGE_SIZE;
|
2016-05-20 00:11:04 +00:00
|
|
|
}
|
|
|
|
|
2015-11-07 00:29:57 +00:00
|
|
|
void __init hugetlb_add_hstate(unsigned int order)
|
2008-07-24 04:27:44 +00:00
|
|
|
{
|
|
|
|
struct hstate *h;
|
2008-07-24 04:27:48 +00:00
|
|
|
unsigned long i;
|
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
if (size_to_hstate(PAGE_SIZE << order)) {
|
|
|
|
return;
|
|
|
|
}
|
2012-07-31 23:41:54 +00:00
|
|
|
BUG_ON(hugetlb_max_hstate >= HUGE_MAX_HSTATE);
|
2023-10-04 15:32:48 +00:00
|
|
|
BUG_ON(order < order_base_2(__NR_USED_SUBPAGE));
|
2012-07-31 23:41:54 +00:00
|
|
|
h = &hstates[hugetlb_max_hstate++];
|
mm/hugetlb: fix possible recursive locking detected warning
When tries to demote 1G hugetlb folios, a lockdep warning is observed:
============================================
WARNING: possible recursive locking detected
6.10.0-rc6-00452-ga4d0275fa660-dirty #79 Not tainted
--------------------------------------------
bash/710 is trying to acquire lock:
ffffffff8f0a7850 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0x244/0x460
but task is already holding lock:
ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&h->resize_lock);
lock(&h->resize_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by bash/710:
#0: ffff8f118439c3f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0
#1: ffff8f11893b9e88 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0
#2: ffff8f1183dc4428 (kn->active#98){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0
#3: ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460
stack backtrace:
CPU: 3 PID: 710 Comm: bash Not tainted 6.10.0-rc6-00452-ga4d0275fa660-dirty #79
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
__lock_acquire+0x10f2/0x1ca0
lock_acquire+0xbe/0x2d0
__mutex_lock+0x6d/0x400
demote_store+0x244/0x460
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x380/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xb9/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa61db14887
RSP: 002b:00007ffc56c48358 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fa61db14887
RDX: 0000000000000002 RSI: 000055a030050220 RDI: 0000000000000001
RBP: 000055a030050220 R08: 00007fa61dbd1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 00007fa61dc1b780 R14: 00007fa61dc17600 R15: 00007fa61dc16a00
</TASK>
Lockdep considers this an AA deadlock because the different resize_lock
mutexes reside in the same lockdep class, but this is a false positive.
Place them in distinct classes to avoid these warnings.
Link: https://lkml.kernel.org/r/20240712031314.2570452-1-linmiaohe@huawei.com
Fixes: 8531fc6f52f5 ("hugetlb: add hugetlb demote page support")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-12 03:13:14 +00:00
|
|
|
__mutex_init(&h->resize_lock, "resize mutex", &h->resize_key);
|
2008-07-24 04:27:44 +00:00
|
|
|
h->order = order;
|
2021-02-24 20:07:46 +00:00
|
|
|
h->mask = ~(huge_page_size(h) - 1);
|
2008-07-24 04:27:48 +00:00
|
|
|
for (i = 0; i < MAX_NUMNODES; ++i)
|
|
|
|
INIT_LIST_HEAD(&h->hugepage_freelists[i]);
|
2012-07-31 23:42:07 +00:00
|
|
|
INIT_LIST_HEAD(&h->hugepage_activelist);
|
2016-05-20 00:11:40 +00:00
|
|
|
h->next_nid_to_alloc = first_memory_node;
|
|
|
|
h->next_nid_to_free = first_memory_node;
|
2008-07-24 04:27:44 +00:00
|
|
|
snprintf(h->name, HSTATE_NAME_LEN, "hugepages-%lukB",
|
2022-09-01 12:00:22 +00:00
|
|
|
huge_page_size(h)/SZ_1K);
|
2008-07-24 04:27:48 +00:00
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
parsed_hstate = h;
|
|
|
|
}
|
|
|
|
|
2021-11-05 20:43:28 +00:00
|
|
|
bool __init __weak hugetlb_node_alloc_supported(void)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
2022-04-29 21:36:57 +00:00
|
|
|
|
|
|
|
static void __init hugepages_clear_pages_in_node(void)
|
|
|
|
{
|
|
|
|
if (!hugetlb_max_hstate) {
|
|
|
|
default_hstate_max_huge_pages = 0;
|
|
|
|
memset(default_hugepages_in_node, 0,
|
2022-09-01 12:00:24 +00:00
|
|
|
sizeof(default_hugepages_in_node));
|
2022-04-29 21:36:57 +00:00
|
|
|
} else {
|
|
|
|
parsed_hstate->max_huge_pages = 0;
|
|
|
|
memset(parsed_hstate->max_huge_pages_node, 0,
|
2022-09-01 12:00:24 +00:00
|
|
|
sizeof(parsed_hstate->max_huge_pages_node));
|
2022-04-29 21:36:57 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-06-03 23:00:46 +00:00
|
|
|
/*
|
|
|
|
* hugepages command line processing
|
|
|
|
* hugepages normally follows a valid hugepagsz or default_hugepagsz
|
|
|
|
* specification. If not, ignore the hugepages value. hugepages can also
|
|
|
|
* be the first huge page command line option in which case it implicitly
|
|
|
|
* specifies the number of huge pages for the default size.
|
|
|
|
*/
|
|
|
|
static int __init hugepages_setup(char *s)
|
2008-07-24 04:27:44 +00:00
|
|
|
{
|
|
|
|
unsigned long *mhp;
|
2008-07-24 04:27:48 +00:00
|
|
|
static unsigned long *last_mhp;
|
2021-11-05 20:43:28 +00:00
|
|
|
int node = NUMA_NO_NODE;
|
|
|
|
int count;
|
|
|
|
unsigned long tmp;
|
|
|
|
char *p = s;
|
2008-07-24 04:27:44 +00:00
|
|
|
|
2016-05-20 00:11:04 +00:00
|
|
|
if (!parsed_valid_hugepagesz) {
|
2020-06-03 23:00:46 +00:00
|
|
|
pr_warn("HugeTLB: hugepages=%s does not follow a valid hugepagesz, ignoring\n", s);
|
2016-05-20 00:11:04 +00:00
|
|
|
parsed_valid_hugepagesz = true;
|
2022-04-29 21:36:57 +00:00
|
|
|
return 1;
|
2016-05-20 00:11:04 +00:00
|
|
|
}
|
2020-06-03 23:00:46 +00:00
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
/*
|
2020-06-03 23:00:46 +00:00
|
|
|
* !hugetlb_max_hstate means we haven't parsed a hugepagesz= parameter
|
|
|
|
* yet, so this hugepages= parameter goes to the "default hstate".
|
|
|
|
* Otherwise, it goes with the previously parsed hugepagesz or
|
|
|
|
* default_hugepagesz.
|
2008-07-24 04:27:44 +00:00
|
|
|
*/
|
2016-05-20 00:11:04 +00:00
|
|
|
else if (!hugetlb_max_hstate)
|
2008-07-24 04:27:44 +00:00
|
|
|
mhp = &default_hstate_max_huge_pages;
|
|
|
|
else
|
|
|
|
mhp = &parsed_hstate->max_huge_pages;
|
|
|
|
|
2008-07-24 04:27:48 +00:00
|
|
|
if (mhp == last_mhp) {
|
2020-06-03 23:00:46 +00:00
|
|
|
pr_warn("HugeTLB: hugepages= specified twice without interleaving hugepagesz=, ignoring hugepages=%s\n", s);
|
2022-04-29 21:36:57 +00:00
|
|
|
return 1;
|
2008-07-24 04:27:48 +00:00
|
|
|
}
|
|
|
|
|
2021-11-05 20:43:28 +00:00
|
|
|
while (*p) {
|
|
|
|
count = 0;
|
|
|
|
if (sscanf(p, "%lu%n", &tmp, &count) != 1)
|
|
|
|
goto invalid;
|
|
|
|
/* Parameter is node format */
|
|
|
|
if (p[count] == ':') {
|
|
|
|
if (!hugetlb_node_alloc_supported()) {
|
|
|
|
pr_warn("HugeTLB: architecture can't support node specific alloc, ignoring!\n");
|
2022-04-29 21:36:57 +00:00
|
|
|
return 1;
|
2021-11-05 20:43:28 +00:00
|
|
|
}
|
2022-04-29 21:36:57 +00:00
|
|
|
if (tmp >= MAX_NUMNODES || !node_online(tmp))
|
2022-02-26 03:11:02 +00:00
|
|
|
goto invalid;
|
2022-04-29 21:36:57 +00:00
|
|
|
node = array_index_nospec(tmp, MAX_NUMNODES);
|
2021-11-05 20:43:28 +00:00
|
|
|
p += count + 1;
|
|
|
|
/* Parse hugepages */
|
|
|
|
if (sscanf(p, "%lu%n", &tmp, &count) != 1)
|
|
|
|
goto invalid;
|
|
|
|
if (!hugetlb_max_hstate)
|
|
|
|
default_hugepages_in_node[node] = tmp;
|
|
|
|
else
|
|
|
|
parsed_hstate->max_huge_pages_node[node] = tmp;
|
|
|
|
*mhp += tmp;
|
|
|
|
/* Go to parse next node*/
|
|
|
|
if (p[count] == ',')
|
|
|
|
p += count + 1;
|
|
|
|
else
|
|
|
|
break;
|
|
|
|
} else {
|
|
|
|
if (p != s)
|
|
|
|
goto invalid;
|
|
|
|
*mhp = tmp;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2008-07-24 04:27:44 +00:00
|
|
|
|
2008-07-24 04:27:48 +00:00
|
|
|
/*
|
|
|
|
* Global state is always initialized later in hugetlb_init.
|
2021-05-05 01:33:22 +00:00
|
|
|
* But we need to allocate gigantic hstates here early to still
|
2008-07-24 04:27:48 +00:00
|
|
|
* use the bootmem allocator.
|
|
|
|
*/
|
2021-05-05 01:33:22 +00:00
|
|
|
if (hugetlb_max_hstate && hstate_is_gigantic(parsed_hstate))
|
2008-07-24 04:27:48 +00:00
|
|
|
hugetlb_hstate_alloc_pages(parsed_hstate);
|
|
|
|
|
|
|
|
last_mhp = mhp;
|
|
|
|
|
2008-07-24 04:27:44 +00:00
|
|
|
return 1;
|
2021-11-05 20:43:28 +00:00
|
|
|
|
|
|
|
invalid:
|
|
|
|
pr_warn("HugeTLB: Invalid hugepages parameter %s\n", p);
|
2022-04-29 21:36:57 +00:00
|
|
|
hugepages_clear_pages_in_node();
|
2022-04-29 21:36:57 +00:00
|
|
|
return 1;
|
2008-07-24 04:27:44 +00:00
|
|
|
}
|
2020-06-03 23:00:46 +00:00
|
|
|
__setup("hugepages=", hugepages_setup);
|
2008-07-24 04:27:52 +00:00
|
|
|
|
2020-06-03 23:00:46 +00:00
|
|
|
/*
|
|
|
|
* hugepagesz command line processing
|
|
|
|
* A specific huge page size can only be specified once with hugepagesz.
|
|
|
|
* hugepagesz is followed by hugepages on the command line. The global
|
|
|
|
* variable 'parsed_valid_hugepagesz' is used to determine if prior
|
|
|
|
* hugepagesz argument was valid.
|
|
|
|
*/
|
2020-06-03 23:00:38 +00:00
|
|
|
static int __init hugepagesz_setup(char *s)
|
2008-07-24 04:27:52 +00:00
|
|
|
{
|
2020-06-03 23:00:38 +00:00
|
|
|
unsigned long size;
|
2020-06-03 23:00:46 +00:00
|
|
|
struct hstate *h;
|
|
|
|
|
|
|
|
parsed_valid_hugepagesz = false;
|
2020-06-03 23:00:38 +00:00
|
|
|
size = (unsigned long)memparse(s, NULL);
|
|
|
|
|
|
|
|
if (!arch_hugetlb_valid_size(size)) {
|
2020-06-03 23:00:46 +00:00
|
|
|
pr_err("HugeTLB: unsupported hugepagesz=%s\n", s);
|
2022-04-29 21:36:57 +00:00
|
|
|
return 1;
|
2020-06-03 23:00:38 +00:00
|
|
|
}
|
|
|
|
|
2020-06-03 23:00:46 +00:00
|
|
|
h = size_to_hstate(size);
|
|
|
|
if (h) {
|
|
|
|
/*
|
|
|
|
* hstate for this size already exists. This is normally
|
|
|
|
* an error, but is allowed if the existing hstate is the
|
|
|
|
* default hstate. More specifically, it is only allowed if
|
|
|
|
* the number of huge pages for the default hstate was not
|
|
|
|
* previously specified.
|
|
|
|
*/
|
|
|
|
if (!parsed_default_hugepagesz || h != &default_hstate ||
|
|
|
|
default_hstate.max_huge_pages) {
|
|
|
|
pr_warn("HugeTLB: hugepagesz=%s specified twice, ignoring\n", s);
|
2022-04-29 21:36:57 +00:00
|
|
|
return 1;
|
2020-06-03 23:00:46 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* No need to call hugetlb_add_hstate() as hstate already
|
|
|
|
* exists. But, do set parsed_hstate so that a following
|
|
|
|
* hugepages= parameter will be applied to this hstate.
|
|
|
|
*/
|
|
|
|
parsed_hstate = h;
|
|
|
|
parsed_valid_hugepagesz = true;
|
|
|
|
return 1;
|
2020-06-03 23:00:42 +00:00
|
|
|
}
|
|
|
|
|
2020-06-03 23:00:38 +00:00
|
|
|
hugetlb_add_hstate(ilog2(size) - PAGE_SHIFT);
|
2020-06-03 23:00:46 +00:00
|
|
|
parsed_valid_hugepagesz = true;
|
2008-07-24 04:27:52 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2020-06-03 23:00:38 +00:00
|
|
|
__setup("hugepagesz=", hugepagesz_setup);
|
|
|
|
|
2020-06-03 23:00:46 +00:00
|
|
|
/*
|
|
|
|
* default_hugepagesz command line input
|
|
|
|
* Only one instance of default_hugepagesz allowed on command line.
|
|
|
|
*/
|
2020-06-03 23:00:34 +00:00
|
|
|
static int __init default_hugepagesz_setup(char *s)
|
2008-07-24 04:27:52 +00:00
|
|
|
{
|
2020-06-03 23:00:34 +00:00
|
|
|
unsigned long size;
|
2021-11-05 20:43:28 +00:00
|
|
|
int i;
|
2020-06-03 23:00:34 +00:00
|
|
|
|
2020-06-03 23:00:46 +00:00
|
|
|
parsed_valid_hugepagesz = false;
|
|
|
|
if (parsed_default_hugepagesz) {
|
|
|
|
pr_err("HugeTLB: default_hugepagesz previously specified, ignoring %s\n", s);
|
2022-04-29 21:36:57 +00:00
|
|
|
return 1;
|
2020-06-03 23:00:46 +00:00
|
|
|
}
|
|
|
|
|
2020-06-03 23:00:34 +00:00
|
|
|
size = (unsigned long)memparse(s, NULL);
|
|
|
|
|
|
|
|
if (!arch_hugetlb_valid_size(size)) {
|
2020-06-03 23:00:46 +00:00
|
|
|
pr_err("HugeTLB: unsupported default_hugepagesz=%s\n", s);
|
2022-04-29 21:36:57 +00:00
|
|
|
return 1;
|
2020-06-03 23:00:34 +00:00
|
|
|
}
|
|
|
|
|
2020-06-03 23:00:46 +00:00
|
|
|
hugetlb_add_hstate(ilog2(size) - PAGE_SHIFT);
|
|
|
|
parsed_valid_hugepagesz = true;
|
|
|
|
parsed_default_hugepagesz = true;
|
|
|
|
default_hstate_idx = hstate_index(size_to_hstate(size));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The number of default huge pages (for this size) could have been
|
|
|
|
* specified as the first hugetlb parameter: hugepages=X. If so,
|
|
|
|
* then default_hstate_max_huge_pages is set. If the default huge
|
2023-12-28 14:47:04 +00:00
|
|
|
* page size is gigantic (> MAX_PAGE_ORDER), then the pages must be
|
2020-06-03 23:00:46 +00:00
|
|
|
* allocated here from bootmem allocator.
|
|
|
|
*/
|
|
|
|
if (default_hstate_max_huge_pages) {
|
|
|
|
default_hstate.max_huge_pages = default_hstate_max_huge_pages;
|
2022-04-29 21:36:57 +00:00
|
|
|
for_each_online_node(i)
|
2021-11-05 20:43:28 +00:00
|
|
|
default_hstate.max_huge_pages_node[i] =
|
|
|
|
default_hugepages_in_node[i];
|
2020-06-03 23:00:46 +00:00
|
|
|
if (hstate_is_gigantic(&default_hstate))
|
|
|
|
hugetlb_hstate_alloc_pages(&default_hstate);
|
|
|
|
default_hstate_max_huge_pages = 0;
|
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:52 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2020-06-03 23:00:34 +00:00
|
|
|
__setup("default_hugepagesz=", default_hugepagesz_setup);
|
2008-07-24 04:27:44 +00:00
|
|
|
|
2020-08-12 01:30:32 +00:00
|
|
|
static unsigned int allowed_mems_nr(struct hstate *h)
|
2008-07-26 02:44:37 +00:00
|
|
|
{
|
|
|
|
int node;
|
|
|
|
unsigned int nr = 0;
|
2022-08-05 00:59:03 +00:00
|
|
|
nodemask_t *mbind_nodemask;
|
2020-08-12 01:30:32 +00:00
|
|
|
unsigned int *array = h->free_huge_pages_node;
|
|
|
|
gfp_t gfp_mask = htlb_alloc_mask(h);
|
|
|
|
|
2022-08-05 00:59:03 +00:00
|
|
|
mbind_nodemask = policy_mbind_nodemask(gfp_mask);
|
2020-08-12 01:30:32 +00:00
|
|
|
for_each_node_mask(node, cpuset_current_mems_allowed) {
|
2022-08-05 00:59:03 +00:00
|
|
|
if (!mbind_nodemask || node_isset(node, *mbind_nodemask))
|
2020-08-12 01:30:32 +00:00
|
|
|
nr += array[node];
|
|
|
|
}
|
2008-07-26 02:44:37 +00:00
|
|
|
|
|
|
|
return nr;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_SYSCTL
|
2024-05-18 14:00:04 +00:00
|
|
|
static int proc_hugetlb_doulongvec_minmax(const struct ctl_table *table, int write,
|
2020-09-04 23:36:13 +00:00
|
|
|
void *buffer, size_t *length,
|
|
|
|
loff_t *ppos, unsigned long *out)
|
|
|
|
{
|
|
|
|
struct ctl_table dup_table;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* In order to avoid races with __do_proc_doulongvec_minmax(), we
|
|
|
|
* can duplicate the @table and alter the duplicate of it.
|
|
|
|
*/
|
|
|
|
dup_table = *table;
|
|
|
|
dup_table.data = out;
|
|
|
|
|
|
|
|
return proc_doulongvec_minmax(&dup_table, write, buffer, length, ppos);
|
|
|
|
}
|
|
|
|
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
static int hugetlb_sysctl_handler_common(bool obey_mempolicy,
|
2024-05-18 14:00:04 +00:00
|
|
|
const struct ctl_table *table, int write,
|
2020-04-24 06:43:38 +00:00
|
|
|
void *buffer, size_t *length, loff_t *ppos)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2008-07-24 04:27:42 +00:00
|
|
|
struct hstate *h = &default_hstate;
|
2014-08-06 23:06:51 +00:00
|
|
|
unsigned long tmp = h->max_huge_pages;
|
2011-01-13 23:47:26 +00:00
|
|
|
int ret;
|
2008-07-24 04:27:42 +00:00
|
|
|
|
hugetlb: ensure hugepage access is denied if hugepages are not supported
Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:
Unable to handle kernel paging request for data at address 0x00000031
Faulting instruction address: 0xc000000000245710
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
....
In KVM guests on Power, in a guest not backed by hugepages, we see the
following:
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 64 kB
HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init(). Extract the check to a helper function, and use it in a
few relevant places.
This does make hugetlbfs not supported (not registered at all) in this
environment. I believe this is fine, as there are no valid hugepages
and that won't change at runtime.
[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 19:50:00 +00:00
|
|
|
if (!hugepages_supported())
|
2016-03-09 22:08:35 +00:00
|
|
|
return -EOPNOTSUPP;
|
hugetlb: ensure hugepage access is denied if hugepages are not supported
Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:
Unable to handle kernel paging request for data at address 0x00000031
Faulting instruction address: 0xc000000000245710
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
....
In KVM guests on Power, in a guest not backed by hugepages, we see the
following:
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 64 kB
HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init(). Extract the check to a helper function, and use it in a
few relevant places.
This does make hugetlbfs not supported (not registered at all) in this
environment. I believe this is fine, as there are no valid hugepages
and that won't change at runtime.
[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 19:50:00 +00:00
|
|
|
|
2020-09-04 23:36:13 +00:00
|
|
|
ret = proc_hugetlb_doulongvec_minmax(table, write, buffer, length, ppos,
|
|
|
|
&tmp);
|
2011-01-13 23:47:26 +00:00
|
|
|
if (ret)
|
|
|
|
goto out;
|
2008-07-24 04:27:42 +00:00
|
|
|
|
2014-08-06 23:06:51 +00:00
|
|
|
if (write)
|
|
|
|
ret = __nr_hugepages_store_common(obey_mempolicy, h,
|
|
|
|
NUMA_NO_NODE, tmp, *length);
|
2011-01-13 23:47:26 +00:00
|
|
|
out:
|
|
|
|
return ret;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2007-07-17 11:03:13 +00:00
|
|
|
|
sysctl: treewide: constify the ctl_table argument of proc_handlers
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
2024-07-24 18:59:29 +00:00
|
|
|
static int hugetlb_sysctl_handler(const struct ctl_table *table, int write,
|
2020-04-24 06:43:38 +00:00
|
|
|
void *buffer, size_t *length, loff_t *ppos)
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
return hugetlb_sysctl_handler_common(false, table, write,
|
|
|
|
buffer, length, ppos);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_NUMA
|
sysctl: treewide: constify the ctl_table argument of proc_handlers
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
2024-07-24 18:59:29 +00:00
|
|
|
static int hugetlb_mempolicy_sysctl_handler(const struct ctl_table *table, int write,
|
2020-04-24 06:43:38 +00:00
|
|
|
void *buffer, size_t *length, loff_t *ppos)
|
hugetlb: derive huge pages nodes allowed from task mempolicy
This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows:
* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
is produced. This will cause the hugetlb subsystem to use
node_online_map as the "nodes_allowed". This preserves the
behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
a nodemask with the single preferred node will be produced.
"local" policy will NOT track any internode migrations of the
task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
will be used.
* Other than to inform the construction of the nodes_allowed node
mask, the actual mempolicy mode is ignored. That is, all modes
behave like interleave over the resulting nodes_allowed mask
with no "fallback".
See the updated documentation [next patch] for more information
about the implications of this patch.
Examples:
Starting with:
Node 0 HugePages_Total: 0
Node 1 HugePages_Total: 0
Node 2 HugePages_Total: 0
Node 3 HugePages_Total: 0
Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:
sysctl vm.nr_hugepages[_mempolicy]=32
yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 8
Node 3 HugePages_Total: 8
Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.
Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes. So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:
numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40
This yields:
Node 0 HugePages_Total: 8
Node 1 HugePages_Total: 8
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.
Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:
numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32
yields:
Node 0 HugePages_Total: 4
Node 1 HugePages_Total: 4
Node 2 HugePages_Total: 16
Node 3 HugePages_Total: 8
The 8 huge pages freed were balanced over nodes 0 and 1.
[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:21 +00:00
|
|
|
{
|
|
|
|
return hugetlb_sysctl_handler_common(true, table, write,
|
|
|
|
buffer, length, ppos);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_NUMA */
|
|
|
|
|
sysctl: treewide: constify the ctl_table argument of proc_handlers
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
2024-07-24 18:59:29 +00:00
|
|
|
static int hugetlb_overcommit_handler(const struct ctl_table *table, int write,
|
2020-04-24 06:43:38 +00:00
|
|
|
void *buffer, size_t *length, loff_t *ppos)
|
2008-02-08 12:18:18 +00:00
|
|
|
{
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = &default_hstate;
|
2008-07-24 04:27:42 +00:00
|
|
|
unsigned long tmp;
|
2011-01-13 23:47:26 +00:00
|
|
|
int ret;
|
2008-07-24 04:27:42 +00:00
|
|
|
|
hugetlb: ensure hugepage access is denied if hugepages are not supported
Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:
Unable to handle kernel paging request for data at address 0x00000031
Faulting instruction address: 0xc000000000245710
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
....
In KVM guests on Power, in a guest not backed by hugepages, we see the
following:
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 64 kB
HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init(). Extract the check to a helper function, and use it in a
few relevant places.
This does make hugetlbfs not supported (not registered at all) in this
environment. I believe this is fine, as there are no valid hugepages
and that won't change at runtime.
[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 19:50:00 +00:00
|
|
|
if (!hugepages_supported())
|
2016-03-09 22:08:35 +00:00
|
|
|
return -EOPNOTSUPP;
|
hugetlb: ensure hugepage access is denied if hugepages are not supported
Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:
Unable to handle kernel paging request for data at address 0x00000031
Faulting instruction address: 0xc000000000245710
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
....
In KVM guests on Power, in a guest not backed by hugepages, we see the
following:
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 64 kB
HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init(). Extract the check to a helper function, and use it in a
few relevant places.
This does make hugetlbfs not supported (not registered at all) in this
environment. I believe this is fine, as there are no valid hugepages
and that won't change at runtime.
[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 19:50:00 +00:00
|
|
|
|
2011-03-22 23:33:05 +00:00
|
|
|
tmp = h->nr_overcommit_huge_pages;
|
2008-07-24 04:27:42 +00:00
|
|
|
|
2014-06-04 23:07:08 +00:00
|
|
|
if (write && hstate_is_gigantic(h))
|
2011-01-13 23:47:27 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2020-09-04 23:36:13 +00:00
|
|
|
ret = proc_hugetlb_doulongvec_minmax(table, write, buffer, length, ppos,
|
|
|
|
&tmp);
|
2011-01-13 23:47:26 +00:00
|
|
|
if (ret)
|
|
|
|
goto out;
|
2008-07-24 04:27:42 +00:00
|
|
|
|
|
|
|
if (write) {
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2008-07-24 04:27:42 +00:00
|
|
|
h->nr_overcommit_huge_pages = tmp;
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2008-07-24 04:27:42 +00:00
|
|
|
}
|
2011-01-13 23:47:26 +00:00
|
|
|
out:
|
|
|
|
return ret;
|
2008-02-08 12:18:18 +00:00
|
|
|
}
|
|
|
|
|
2023-03-09 12:20:11 +00:00
|
|
|
static struct ctl_table hugetlb_table[] = {
|
|
|
|
{
|
|
|
|
.procname = "nr_hugepages",
|
|
|
|
.data = NULL,
|
|
|
|
.maxlen = sizeof(unsigned long),
|
|
|
|
.mode = 0644,
|
|
|
|
.proc_handler = hugetlb_sysctl_handler,
|
|
|
|
},
|
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
{
|
|
|
|
.procname = "nr_hugepages_mempolicy",
|
|
|
|
.data = NULL,
|
|
|
|
.maxlen = sizeof(unsigned long),
|
|
|
|
.mode = 0644,
|
|
|
|
.proc_handler = &hugetlb_mempolicy_sysctl_handler,
|
|
|
|
},
|
|
|
|
#endif
|
|
|
|
{
|
|
|
|
.procname = "hugetlb_shm_group",
|
|
|
|
.data = &sysctl_hugetlb_shm_group,
|
|
|
|
.maxlen = sizeof(gid_t),
|
|
|
|
.mode = 0644,
|
|
|
|
.proc_handler = proc_dointvec,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.procname = "nr_overcommit_hugepages",
|
|
|
|
.data = NULL,
|
|
|
|
.maxlen = sizeof(unsigned long),
|
|
|
|
.mode = 0644,
|
|
|
|
.proc_handler = hugetlb_overcommit_handler,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static void hugetlb_sysctl_init(void)
|
|
|
|
{
|
|
|
|
register_sysctl_init("vm", hugetlb_table);
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
#endif /* CONFIG_SYSCTL */
|
|
|
|
|
2008-10-15 19:50:22 +00:00
|
|
|
void hugetlb_report_meminfo(struct seq_file *m)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
mm: show total hugetlb memory consumption in /proc/meminfo
Currently we display some hugepage statistics (total, free, etc) in
/proc/meminfo, but only for default hugepage size (e.g. 2Mb).
If hugepages of different sizes are used (like 2Mb and 1Gb on x86-64),
/proc/meminfo output can be confusing, as non-default sized hugepages
are not reflected at all, and there are no signs that they are existing
and consuming system memory.
To solve this problem, let's display the total amount of memory,
consumed by hugetlb pages of all sized (both free and used). Let's call
it "Hugetlb", and display size in kB to match generic /proc/meminfo
style.
For example, (1024 2Mb pages and 2 1Gb pages are pre-allocated):
$ cat /proc/meminfo
MemTotal: 8168984 kB
MemFree: 3789276 kB
<...>
CmaFree: 0 kB
HugePages_Total: 1024
HugePages_Free: 1024
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
Hugetlb: 4194304 kB
DirectMap4k: 32632 kB
DirectMap2M: 4161536 kB
DirectMap1G: 6291456 kB
Also, this patch updates corresponding docs to reflect Hugetlb entry
meaning and difference between Hugetlb and HugePages_Total * Hugepagesize.
Link: http://lkml.kernel.org/r/20171115231409.12131-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 00:16:22 +00:00
|
|
|
struct hstate *h;
|
|
|
|
unsigned long total = 0;
|
|
|
|
|
hugetlb: ensure hugepage access is denied if hugepages are not supported
Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:
Unable to handle kernel paging request for data at address 0x00000031
Faulting instruction address: 0xc000000000245710
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
....
In KVM guests on Power, in a guest not backed by hugepages, we see the
following:
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 64 kB
HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init(). Extract the check to a helper function, and use it in a
few relevant places.
This does make hugetlbfs not supported (not registered at all) in this
environment. I believe this is fine, as there are no valid hugepages
and that won't change at runtime.
[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 19:50:00 +00:00
|
|
|
if (!hugepages_supported())
|
|
|
|
return;
|
mm: show total hugetlb memory consumption in /proc/meminfo
Currently we display some hugepage statistics (total, free, etc) in
/proc/meminfo, but only for default hugepage size (e.g. 2Mb).
If hugepages of different sizes are used (like 2Mb and 1Gb on x86-64),
/proc/meminfo output can be confusing, as non-default sized hugepages
are not reflected at all, and there are no signs that they are existing
and consuming system memory.
To solve this problem, let's display the total amount of memory,
consumed by hugetlb pages of all sized (both free and used). Let's call
it "Hugetlb", and display size in kB to match generic /proc/meminfo
style.
For example, (1024 2Mb pages and 2 1Gb pages are pre-allocated):
$ cat /proc/meminfo
MemTotal: 8168984 kB
MemFree: 3789276 kB
<...>
CmaFree: 0 kB
HugePages_Total: 1024
HugePages_Free: 1024
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
Hugetlb: 4194304 kB
DirectMap4k: 32632 kB
DirectMap2M: 4161536 kB
DirectMap1G: 6291456 kB
Also, this patch updates corresponding docs to reflect Hugetlb entry
meaning and difference between Hugetlb and HugePages_Total * Hugepagesize.
Link: http://lkml.kernel.org/r/20171115231409.12131-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 00:16:22 +00:00
|
|
|
|
|
|
|
for_each_hstate(h) {
|
|
|
|
unsigned long count = h->nr_huge_pages;
|
|
|
|
|
2021-02-24 20:07:46 +00:00
|
|
|
total += huge_page_size(h) * count;
|
mm: show total hugetlb memory consumption in /proc/meminfo
Currently we display some hugepage statistics (total, free, etc) in
/proc/meminfo, but only for default hugepage size (e.g. 2Mb).
If hugepages of different sizes are used (like 2Mb and 1Gb on x86-64),
/proc/meminfo output can be confusing, as non-default sized hugepages
are not reflected at all, and there are no signs that they are existing
and consuming system memory.
To solve this problem, let's display the total amount of memory,
consumed by hugetlb pages of all sized (both free and used). Let's call
it "Hugetlb", and display size in kB to match generic /proc/meminfo
style.
For example, (1024 2Mb pages and 2 1Gb pages are pre-allocated):
$ cat /proc/meminfo
MemTotal: 8168984 kB
MemFree: 3789276 kB
<...>
CmaFree: 0 kB
HugePages_Total: 1024
HugePages_Free: 1024
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
Hugetlb: 4194304 kB
DirectMap4k: 32632 kB
DirectMap2M: 4161536 kB
DirectMap1G: 6291456 kB
Also, this patch updates corresponding docs to reflect Hugetlb entry
meaning and difference between Hugetlb and HugePages_Total * Hugepagesize.
Link: http://lkml.kernel.org/r/20171115231409.12131-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 00:16:22 +00:00
|
|
|
|
|
|
|
if (h == &default_hstate)
|
|
|
|
seq_printf(m,
|
|
|
|
"HugePages_Total: %5lu\n"
|
|
|
|
"HugePages_Free: %5lu\n"
|
|
|
|
"HugePages_Rsvd: %5lu\n"
|
|
|
|
"HugePages_Surp: %5lu\n"
|
|
|
|
"Hugepagesize: %8lu kB\n",
|
|
|
|
count,
|
|
|
|
h->free_huge_pages,
|
|
|
|
h->resv_huge_pages,
|
|
|
|
h->surplus_huge_pages,
|
2021-02-24 20:07:46 +00:00
|
|
|
huge_page_size(h) / SZ_1K);
|
mm: show total hugetlb memory consumption in /proc/meminfo
Currently we display some hugepage statistics (total, free, etc) in
/proc/meminfo, but only for default hugepage size (e.g. 2Mb).
If hugepages of different sizes are used (like 2Mb and 1Gb on x86-64),
/proc/meminfo output can be confusing, as non-default sized hugepages
are not reflected at all, and there are no signs that they are existing
and consuming system memory.
To solve this problem, let's display the total amount of memory,
consumed by hugetlb pages of all sized (both free and used). Let's call
it "Hugetlb", and display size in kB to match generic /proc/meminfo
style.
For example, (1024 2Mb pages and 2 1Gb pages are pre-allocated):
$ cat /proc/meminfo
MemTotal: 8168984 kB
MemFree: 3789276 kB
<...>
CmaFree: 0 kB
HugePages_Total: 1024
HugePages_Free: 1024
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
Hugetlb: 4194304 kB
DirectMap4k: 32632 kB
DirectMap2M: 4161536 kB
DirectMap1G: 6291456 kB
Also, this patch updates corresponding docs to reflect Hugetlb entry
meaning and difference between Hugetlb and HugePages_Total * Hugepagesize.
Link: http://lkml.kernel.org/r/20171115231409.12131-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 00:16:22 +00:00
|
|
|
}
|
|
|
|
|
2021-02-24 20:07:46 +00:00
|
|
|
seq_printf(m, "Hugetlb: %8lu kB\n", total / SZ_1K);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2020-09-16 20:40:43 +00:00
|
|
|
int hugetlb_report_node_meminfo(char *buf, int len, int nid)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = &default_hstate;
|
2020-09-16 20:40:43 +00:00
|
|
|
|
hugetlb: ensure hugepage access is denied if hugepages are not supported
Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:
Unable to handle kernel paging request for data at address 0x00000031
Faulting instruction address: 0xc000000000245710
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
....
In KVM guests on Power, in a guest not backed by hugepages, we see the
following:
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 64 kB
HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init(). Extract the check to a helper function, and use it in a
few relevant places.
This does make hugetlbfs not supported (not registered at all) in this
environment. I believe this is fine, as there are no valid hugepages
and that won't change at runtime.
[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 19:50:00 +00:00
|
|
|
if (!hugepages_supported())
|
|
|
|
return 0;
|
2020-09-16 20:40:43 +00:00
|
|
|
|
|
|
|
return sysfs_emit_at(buf, len,
|
|
|
|
"Node %d HugePages_Total: %5u\n"
|
|
|
|
"Node %d HugePages_Free: %5u\n"
|
|
|
|
"Node %d HugePages_Surp: %5u\n",
|
|
|
|
nid, h->nr_huge_pages_node[nid],
|
|
|
|
nid, h->free_huge_pages_node[nid],
|
|
|
|
nid, h->surplus_huge_pages_node[nid]);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2022-07-06 03:46:54 +00:00
|
|
|
void hugetlb_show_meminfo_node(int nid)
|
2013-04-29 22:07:48 +00:00
|
|
|
{
|
|
|
|
struct hstate *h;
|
|
|
|
|
hugetlb: ensure hugepage access is denied if hugepages are not supported
Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:
Unable to handle kernel paging request for data at address 0x00000031
Faulting instruction address: 0xc000000000245710
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
....
In KVM guests on Power, in a guest not backed by hugepages, we see the
following:
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 64 kB
HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init(). Extract the check to a helper function, and use it in a
few relevant places.
This does make hugetlbfs not supported (not registered at all) in this
environment. I believe this is fine, as there are no valid hugepages
and that won't change at runtime.
[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 19:50:00 +00:00
|
|
|
if (!hugepages_supported())
|
|
|
|
return;
|
|
|
|
|
2022-07-06 03:46:54 +00:00
|
|
|
for_each_hstate(h)
|
|
|
|
printk("Node %d hugepages_total=%u hugepages_free=%u hugepages_surp=%u hugepages_size=%lukB\n",
|
|
|
|
nid,
|
|
|
|
h->nr_huge_pages_node[nid],
|
|
|
|
h->free_huge_pages_node[nid],
|
|
|
|
h->surplus_huge_pages_node[nid],
|
|
|
|
huge_page_size(h) / SZ_1K);
|
2013-04-29 22:07:48 +00:00
|
|
|
}
|
|
|
|
|
2015-11-06 02:47:14 +00:00
|
|
|
void hugetlb_report_usage(struct seq_file *m, struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
seq_printf(m, "HugetlbPages:\t%8lu kB\n",
|
2023-08-04 01:25:59 +00:00
|
|
|
K(atomic_long_read(&mm->hugetlb_usage)));
|
2015-11-06 02:47:14 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/* Return the number pages of memory we physically have, in PAGE_SIZE units. */
|
|
|
|
unsigned long hugetlb_total_pages(void)
|
|
|
|
{
|
2013-03-22 22:04:40 +00:00
|
|
|
struct hstate *h;
|
|
|
|
unsigned long nr_total_pages = 0;
|
|
|
|
|
|
|
|
for_each_hstate(h)
|
|
|
|
nr_total_pages += h->nr_huge_pages * pages_per_huge_page(h);
|
|
|
|
return nr_total_pages;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:41 +00:00
|
|
|
static int hugetlb_acct_memory(struct hstate *h, long delta)
|
2008-07-24 04:27:22 +00:00
|
|
|
{
|
|
|
|
int ret = -ENOMEM;
|
|
|
|
|
2021-02-24 20:06:57 +00:00
|
|
|
if (!delta)
|
|
|
|
return 0;
|
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2008-07-24 04:27:22 +00:00
|
|
|
/*
|
|
|
|
* When cpuset is configured, it breaks the strict hugetlb page
|
|
|
|
* reservation as the accounting is done on a global variable. Such
|
|
|
|
* reservation is completely rubbish in the presence of cpuset because
|
|
|
|
* the reservation is not checked against page availability for the
|
|
|
|
* current cpuset. Application can still potentially OOM'ed by kernel
|
|
|
|
* with lack of free htlb page in cpuset that the task is in.
|
|
|
|
* Attempt to enforce strict accounting with cpuset is almost
|
|
|
|
* impossible (or too ugly) because cpuset is too fluid that
|
|
|
|
* task or memory node can be dynamically moved between cpusets.
|
|
|
|
*
|
|
|
|
* The change of semantics for shared hugetlb mapping with cpuset is
|
|
|
|
* undesirable. However, in order to preserve some of the semantics,
|
|
|
|
* we fall back to check against current free page availability as
|
|
|
|
* a best attempt and hopefully to minimize the impact of changing
|
|
|
|
* semantics that cpuset has.
|
2020-08-12 01:30:32 +00:00
|
|
|
*
|
|
|
|
* Apart from cpuset, we also have memory policy mechanism that
|
|
|
|
* also determines from which node the kernel will allocate memory
|
|
|
|
* in a NUMA system. So similar to cpuset, we also should consider
|
|
|
|
* the memory policy of the current task. Similar to the description
|
|
|
|
* above.
|
2008-07-24 04:27:22 +00:00
|
|
|
*/
|
|
|
|
if (delta > 0) {
|
2008-07-24 04:27:41 +00:00
|
|
|
if (gather_surplus_pages(h, delta) < 0)
|
2008-07-24 04:27:22 +00:00
|
|
|
goto out;
|
|
|
|
|
2020-08-12 01:30:32 +00:00
|
|
|
if (delta > allowed_mems_nr(h)) {
|
2008-07-24 04:27:41 +00:00
|
|
|
return_unused_surplus_pages(h, delta);
|
2008-07-24 04:27:22 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = 0;
|
|
|
|
if (delta < 0)
|
2008-07-24 04:27:41 +00:00
|
|
|
return_unused_surplus_pages(h, (unsigned long) -delta);
|
2008-07-24 04:27:22 +00:00
|
|
|
|
|
|
|
out:
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2008-07-24 04:27:22 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:32 +00:00
|
|
|
static void hugetlb_vm_op_open(struct vm_area_struct *vma)
|
|
|
|
{
|
2013-09-11 21:21:53 +00:00
|
|
|
struct resv_map *resv = vma_resv_map(vma);
|
2008-07-24 04:27:32 +00:00
|
|
|
|
|
|
|
/*
|
2022-10-19 20:19:57 +00:00
|
|
|
* HPAGE_RESV_OWNER indicates a private mapping.
|
2008-07-24 04:27:32 +00:00
|
|
|
* This new VMA should share its siblings reservation map if present.
|
|
|
|
* The VMA will only ever have a valid reservation map pointer where
|
|
|
|
* it is being copied for another still existing VMA. As that VMA
|
2011-03-31 01:57:33 +00:00
|
|
|
* has a reference to the reservation map it cannot disappear until
|
2008-07-24 04:27:32 +00:00
|
|
|
* after this open call completes. It is therefore safe to take a
|
|
|
|
* new reference here without additional locking.
|
|
|
|
*/
|
2021-09-02 21:58:53 +00:00
|
|
|
if (resv && is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
|
|
|
|
resv_map_dup_hugetlb_cgroup_uncharge_info(resv);
|
2013-09-11 21:21:53 +00:00
|
|
|
kref_get(&resv->refs);
|
2021-09-02 21:58:53 +00:00
|
|
|
}
|
2022-09-14 22:18:07 +00:00
|
|
|
|
hugetlb: fix vma lock handling during split vma and range unmapping
Patch series "hugetlb: fixes for new vma lock series".
In review of the series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", Miaohe Lin pointed out two key issues:
1) There is a race in the routine hugetlb_unmap_file_folio when locks
are dropped and reacquired in the correct order [1].
2) With the switch to using vma lock for fault/truncate synchronization,
we need to make sure lock exists for all VM_MAYSHARE vmas, not just
vmas capable of pmd sharing.
These two issues are addressed here. In addition, having a vma lock
present in all VM_MAYSHARE vmas, uncovered some issues around vma
splitting. Those are also addressed.
[1] https://lore.kernel.org/linux-mm/01f10195-7088-4462-6def-909549c75ef4@huawei.com/
This patch (of 3):
The hugetlb vma lock hangs off the vm_private_data field and is specific
to the vma. When vm_area_dup() is called as part of vma splitting, the
vma lock pointer is copied to the new vma. This will result in issues
such as double freeing of the structure. Update the hugetlb open vm_ops
to allocate a new vma lock for the new vma.
The routine __unmap_hugepage_range_final unconditionally unset VM_MAYSHARE
to prevent subsequent pmd sharing. hugetlb_vma_lock_free attempted to
anticipate this by checking both VM_MAYSHARE and VM_SHARED. However, if
only VM_MAYSHARE was set we would miss the free. With the introduction of
the vma lock, a vma can not participate in pmd sharing if vm_private_data
is NULL. Instead of clearing VM_MAYSHARE in __unmap_hugepage_range_final,
free the vma lock to prevent sharing. Also, update the sharing code to
make sure vma lock is indeed a condition for pmd sharing.
hugetlb_vma_lock_free can then key off VM_MAYSHARE and not miss any vmas.
Link: https://lkml.kernel.org/r/20221005011707.514612-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20221005011707.514612-2-mike.kravetz@oracle.com
Fixes: "hugetlb: add vma based lock for pmd sharing"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-05 01:17:05 +00:00
|
|
|
/*
|
|
|
|
* vma_lock structure for sharable mappings is vma specific.
|
2022-10-19 20:19:57 +00:00
|
|
|
* Clear old pointer (if copied via vm_area_dup) and allocate
|
|
|
|
* new structure. Before clearing, make sure vma_lock is not
|
|
|
|
* for this vma.
|
hugetlb: fix vma lock handling during split vma and range unmapping
Patch series "hugetlb: fixes for new vma lock series".
In review of the series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", Miaohe Lin pointed out two key issues:
1) There is a race in the routine hugetlb_unmap_file_folio when locks
are dropped and reacquired in the correct order [1].
2) With the switch to using vma lock for fault/truncate synchronization,
we need to make sure lock exists for all VM_MAYSHARE vmas, not just
vmas capable of pmd sharing.
These two issues are addressed here. In addition, having a vma lock
present in all VM_MAYSHARE vmas, uncovered some issues around vma
splitting. Those are also addressed.
[1] https://lore.kernel.org/linux-mm/01f10195-7088-4462-6def-909549c75ef4@huawei.com/
This patch (of 3):
The hugetlb vma lock hangs off the vm_private_data field and is specific
to the vma. When vm_area_dup() is called as part of vma splitting, the
vma lock pointer is copied to the new vma. This will result in issues
such as double freeing of the structure. Update the hugetlb open vm_ops
to allocate a new vma lock for the new vma.
The routine __unmap_hugepage_range_final unconditionally unset VM_MAYSHARE
to prevent subsequent pmd sharing. hugetlb_vma_lock_free attempted to
anticipate this by checking both VM_MAYSHARE and VM_SHARED. However, if
only VM_MAYSHARE was set we would miss the free. With the introduction of
the vma lock, a vma can not participate in pmd sharing if vm_private_data
is NULL. Instead of clearing VM_MAYSHARE in __unmap_hugepage_range_final,
free the vma lock to prevent sharing. Also, update the sharing code to
make sure vma lock is indeed a condition for pmd sharing.
hugetlb_vma_lock_free can then key off VM_MAYSHARE and not miss any vmas.
Link: https://lkml.kernel.org/r/20221005011707.514612-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20221005011707.514612-2-mike.kravetz@oracle.com
Fixes: "hugetlb: add vma based lock for pmd sharing"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-05 01:17:05 +00:00
|
|
|
*/
|
|
|
|
if (vma->vm_flags & VM_MAYSHARE) {
|
2022-10-19 20:19:57 +00:00
|
|
|
struct hugetlb_vma_lock *vma_lock = vma->vm_private_data;
|
|
|
|
|
|
|
|
if (vma_lock) {
|
|
|
|
if (vma_lock->vma != vma) {
|
|
|
|
vma->vm_private_data = NULL;
|
|
|
|
hugetlb_vma_lock_alloc(vma);
|
|
|
|
} else
|
|
|
|
pr_warn("HugeTLB: vma_lock already exists in %s.\n", __func__);
|
|
|
|
} else
|
|
|
|
hugetlb_vma_lock_alloc(vma);
|
hugetlb: fix vma lock handling during split vma and range unmapping
Patch series "hugetlb: fixes for new vma lock series".
In review of the series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", Miaohe Lin pointed out two key issues:
1) There is a race in the routine hugetlb_unmap_file_folio when locks
are dropped and reacquired in the correct order [1].
2) With the switch to using vma lock for fault/truncate synchronization,
we need to make sure lock exists for all VM_MAYSHARE vmas, not just
vmas capable of pmd sharing.
These two issues are addressed here. In addition, having a vma lock
present in all VM_MAYSHARE vmas, uncovered some issues around vma
splitting. Those are also addressed.
[1] https://lore.kernel.org/linux-mm/01f10195-7088-4462-6def-909549c75ef4@huawei.com/
This patch (of 3):
The hugetlb vma lock hangs off the vm_private_data field and is specific
to the vma. When vm_area_dup() is called as part of vma splitting, the
vma lock pointer is copied to the new vma. This will result in issues
such as double freeing of the structure. Update the hugetlb open vm_ops
to allocate a new vma lock for the new vma.
The routine __unmap_hugepage_range_final unconditionally unset VM_MAYSHARE
to prevent subsequent pmd sharing. hugetlb_vma_lock_free attempted to
anticipate this by checking both VM_MAYSHARE and VM_SHARED. However, if
only VM_MAYSHARE was set we would miss the free. With the introduction of
the vma lock, a vma can not participate in pmd sharing if vm_private_data
is NULL. Instead of clearing VM_MAYSHARE in __unmap_hugepage_range_final,
free the vma lock to prevent sharing. Also, update the sharing code to
make sure vma lock is indeed a condition for pmd sharing.
hugetlb_vma_lock_free can then key off VM_MAYSHARE and not miss any vmas.
Link: https://lkml.kernel.org/r/20221005011707.514612-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20221005011707.514612-2-mike.kravetz@oracle.com
Fixes: "hugetlb: add vma based lock for pmd sharing"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-05 01:17:05 +00:00
|
|
|
}
|
2008-07-24 04:27:32 +00:00
|
|
|
}
|
|
|
|
|
2008-07-24 04:27:23 +00:00
|
|
|
static void hugetlb_vm_op_close(struct vm_area_struct *vma)
|
|
|
|
{
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = hstate_vma(vma);
|
2022-09-14 22:18:07 +00:00
|
|
|
struct resv_map *resv;
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
struct hugepage_subpool *spool = subpool_vma(vma);
|
2014-04-03 21:47:30 +00:00
|
|
|
unsigned long reserve, start, end;
|
2015-04-15 23:13:39 +00:00
|
|
|
long gbl_reserve;
|
2008-07-24 04:27:32 +00:00
|
|
|
|
2022-09-14 22:18:07 +00:00
|
|
|
hugetlb_vma_lock_free(vma);
|
|
|
|
|
|
|
|
resv = vma_resv_map(vma);
|
2014-04-03 21:47:30 +00:00
|
|
|
if (!resv || !is_vma_resv_set(vma, HPAGE_RESV_OWNER))
|
|
|
|
return;
|
2008-07-24 04:27:32 +00:00
|
|
|
|
2014-04-03 21:47:30 +00:00
|
|
|
start = vma_hugecache_offset(h, vma, vma->vm_start);
|
|
|
|
end = vma_hugecache_offset(h, vma, vma->vm_end);
|
2008-07-24 04:27:32 +00:00
|
|
|
|
2014-04-03 21:47:30 +00:00
|
|
|
reserve = (end - start) - region_count(resv, start, end);
|
2020-04-02 04:11:21 +00:00
|
|
|
hugetlb_cgroup_uncharge_counter(resv, start, end);
|
2014-04-03 21:47:30 +00:00
|
|
|
if (reserve) {
|
2015-04-15 23:13:39 +00:00
|
|
|
/*
|
|
|
|
* Decrement reserve counts. The global reserve count may be
|
|
|
|
* adjusted if the subpool has a minimum size.
|
|
|
|
*/
|
|
|
|
gbl_reserve = hugepage_subpool_put_pages(spool, reserve);
|
|
|
|
hugetlb_acct_memory(h, -gbl_reserve);
|
2008-07-24 04:27:32 +00:00
|
|
|
}
|
2020-04-02 04:11:21 +00:00
|
|
|
|
|
|
|
kref_put(&resv->refs, resv_map_release);
|
2008-07-24 04:27:23 +00:00
|
|
|
}
|
|
|
|
|
2017-11-30 00:10:28 +00:00
|
|
|
static int hugetlb_vm_op_split(struct vm_area_struct *vma, unsigned long addr)
|
|
|
|
{
|
|
|
|
if (addr & ~(huge_page_mask(hstate_vma(vma))))
|
|
|
|
return -EINVAL;
|
2023-01-04 23:19:10 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* PMD sharing is only possible for PUD_SIZE-aligned address ranges
|
|
|
|
* in HugeTLB VMAs. If we will lose PUD_SIZE alignment due to this
|
|
|
|
* split, unshare PMDs in the PUD_SIZE interval surrounding addr now.
|
|
|
|
*/
|
|
|
|
if (addr & ~PUD_MASK) {
|
|
|
|
/*
|
|
|
|
* hugetlb_vm_op_split is called right before we attempt to
|
|
|
|
* split the VMA. We will need to unshare PMDs in the old and
|
|
|
|
* new VMAs, so let's unshare before we split.
|
|
|
|
*/
|
|
|
|
unsigned long floor = addr & PUD_MASK;
|
|
|
|
unsigned long ceil = floor + PUD_SIZE;
|
|
|
|
|
|
|
|
if (floor >= vma->vm_start && ceil <= vma->vm_end)
|
|
|
|
hugetlb_unshare_pmds(vma, floor, ceil);
|
|
|
|
}
|
|
|
|
|
2017-11-30 00:10:28 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-04-05 23:24:25 +00:00
|
|
|
static unsigned long hugetlb_vm_op_pagesize(struct vm_area_struct *vma)
|
|
|
|
{
|
2021-02-24 20:07:46 +00:00
|
|
|
return huge_page_size(hstate_vma(vma));
|
2018-04-05 23:24:25 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* We cannot handle pagefaults against hugetlb pages at all. They cause
|
|
|
|
* handle_mm_fault() to try to instantiate regular-sized pages in the
|
2021-02-24 20:07:19 +00:00
|
|
|
* hugepage VMA. do_page_fault() is supposed to trap this, so BUG is we get
|
2005-04-16 22:20:36 +00:00
|
|
|
* this far.
|
|
|
|
*/
|
2018-06-08 00:08:04 +00:00
|
|
|
static vm_fault_t hugetlb_vm_op_fault(struct vm_fault *vmf)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
BUG();
|
2007-07-19 08:47:03 +00:00
|
|
|
return 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2018-08-02 22:36:05 +00:00
|
|
|
/*
|
|
|
|
* When a new function is introduced to vm_operations_struct and added
|
|
|
|
* to hugetlb_vm_ops, please consider adding the function to shm_vm_ops.
|
|
|
|
* This is because under System V memory model, mappings created via
|
|
|
|
* shmget/shmat with "huge page" specified are backed by hugetlbfs files,
|
|
|
|
* their original vm_ops are overwritten with shm_vm_ops.
|
|
|
|
*/
|
2009-09-27 18:29:37 +00:00
|
|
|
const struct vm_operations_struct hugetlb_vm_ops = {
|
2007-07-19 08:47:03 +00:00
|
|
|
.fault = hugetlb_vm_op_fault,
|
2008-07-24 04:27:32 +00:00
|
|
|
.open = hugetlb_vm_op_open,
|
2008-07-24 04:27:23 +00:00
|
|
|
.close = hugetlb_vm_op_close,
|
2020-12-15 03:08:17 +00:00
|
|
|
.may_split = hugetlb_vm_op_split,
|
2018-04-05 23:24:25 +00:00
|
|
|
.pagesize = hugetlb_vm_op_pagesize,
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
2006-01-06 08:10:44 +00:00
|
|
|
static pte_t make_huge_pte(struct vm_area_struct *vma, struct page *page,
|
|
|
|
int writable)
|
2005-06-22 00:14:44 +00:00
|
|
|
{
|
|
|
|
pte_t entry;
|
mm/hugetlb: change parameters of arch_make_huge_pte()
Patch series "Subject: [PATCH v2 0/5] Implement huge VMAP and VMALLOC on powerpc 8xx", v2.
This series implements huge VMAP and VMALLOC on powerpc 8xx.
Powerpc 8xx has 4 page sizes:
- 4k
- 16k
- 512k
- 8M
At the time being, vmalloc and vmap only support huge pages which are
leaf at PMD level.
Here the PMD level is 4M, it doesn't correspond to any supported
page size.
For now, implement use of 16k and 512k pages which is done
at PTE level.
Support of 8M pages will be implemented later, it requires use of
hugepd tables.
To allow this, the architecture provides two functions:
- arch_vmap_pte_range_map_size() which tells vmap_pte_range() what
page size to use. A stub returning PAGE_SIZE is provided when the
architecture doesn't provide this function.
- arch_vmap_pte_supported_shift() which tells __vmalloc_node_range()
what page shift to use for a given area size. A stub returning
PAGE_SHIFT is provided when the architecture doesn't provide this
function.
This patch (of 5):
At the time being, arch_make_huge_pte() has the following prototype:
pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable);
vma is used to get the pages shift or size.
vma is also used on Sparc to get vm_flags.
page is not used.
writable is not used.
In order to use this function without a vma, replace vma by shift and
flags. Also remove the used parameters.
Link: https://lkml.kernel.org/r/cover.1620795204.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/f4633ac6a7da2f22f31a04a89e0a7026bb78b15b.1620795204.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:00 +00:00
|
|
|
unsigned int shift = huge_page_shift(hstate_vma(vma));
|
2005-06-22 00:14:44 +00:00
|
|
|
|
2006-01-06 08:10:44 +00:00
|
|
|
if (writable) {
|
2013-04-29 22:07:23 +00:00
|
|
|
entry = huge_pte_mkwrite(huge_pte_mkdirty(mk_huge_pte(page,
|
|
|
|
vma->vm_page_prot)));
|
2005-06-22 00:14:44 +00:00
|
|
|
} else {
|
2013-04-29 22:07:23 +00:00
|
|
|
entry = huge_pte_wrprotect(mk_huge_pte(page,
|
|
|
|
vma->vm_page_prot));
|
2005-06-22 00:14:44 +00:00
|
|
|
}
|
|
|
|
entry = pte_mkyoung(entry);
|
mm/hugetlb: change parameters of arch_make_huge_pte()
Patch series "Subject: [PATCH v2 0/5] Implement huge VMAP and VMALLOC on powerpc 8xx", v2.
This series implements huge VMAP and VMALLOC on powerpc 8xx.
Powerpc 8xx has 4 page sizes:
- 4k
- 16k
- 512k
- 8M
At the time being, vmalloc and vmap only support huge pages which are
leaf at PMD level.
Here the PMD level is 4M, it doesn't correspond to any supported
page size.
For now, implement use of 16k and 512k pages which is done
at PTE level.
Support of 8M pages will be implemented later, it requires use of
hugepd tables.
To allow this, the architecture provides two functions:
- arch_vmap_pte_range_map_size() which tells vmap_pte_range() what
page size to use. A stub returning PAGE_SIZE is provided when the
architecture doesn't provide this function.
- arch_vmap_pte_supported_shift() which tells __vmalloc_node_range()
what page shift to use for a given area size. A stub returning
PAGE_SHIFT is provided when the architecture doesn't provide this
function.
This patch (of 5):
At the time being, arch_make_huge_pte() has the following prototype:
pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable);
vma is used to get the pages shift or size.
vma is also used on Sparc to get vm_flags.
page is not used.
writable is not used.
In order to use this function without a vma, replace vma by shift and
flags. Also remove the used parameters.
Link: https://lkml.kernel.org/r/cover.1620795204.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/f4633ac6a7da2f22f31a04a89e0a7026bb78b15b.1620795204.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:00 +00:00
|
|
|
entry = arch_make_huge_pte(entry, shift, vma->vm_flags);
|
2005-06-22 00:14:44 +00:00
|
|
|
|
|
|
|
return entry;
|
|
|
|
}
|
|
|
|
|
2006-01-06 08:10:44 +00:00
|
|
|
static void set_huge_ptep_writable(struct vm_area_struct *vma,
|
|
|
|
unsigned long address, pte_t *ptep)
|
|
|
|
{
|
|
|
|
pte_t entry;
|
|
|
|
|
2024-07-02 13:51:20 +00:00
|
|
|
entry = huge_pte_mkwrite(huge_pte_mkdirty(huge_ptep_get(vma->vm_mm, address, ptep)));
|
2011-07-26 00:12:14 +00:00
|
|
|
if (huge_ptep_set_access_flags(vma, address, ptep, entry, 1))
|
MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
On VIVT ARM, when we have multiple shared mappings of the same file
in the same MM, we need to ensure that we have coherency across all
copies. We do this via make_coherent() by making the pages
uncacheable.
This used to work fine, until we allowed highmem with highpte - we
now have a page table which is mapped as required, and is not available
for modification via update_mmu_cache().
Ralf Beache suggested getting rid of the PTE value passed to
update_mmu_cache():
On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables
to construct a pointer to the pte again. Passing a pte_t * is much
more elegant. Maybe we might even replace the pte argument with the
pte_t?
Ben Herrenschmidt would also like the pte pointer for PowerPC:
Passing the ptep in there is exactly what I want. I want that
-instead- of the PTE value, because I have issue on some ppc cases,
for I$/D$ coherency, where set_pte_at() may decide to mask out the
_PAGE_EXEC.
So, pass in the mapped page table pointer into update_mmu_cache(), and
remove the PTE value, updating all implementations and call sites to
suit.
Includes a fix from Stephen Rothwell:
sparc: fix fallout from update_mmu_cache API change
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18 16:40:18 +00:00
|
|
|
update_mmu_cache(vma, address, ptep);
|
2006-01-06 08:10:44 +00:00
|
|
|
}
|
|
|
|
|
2017-07-06 22:38:47 +00:00
|
|
|
bool is_hugetlb_entry_migration(pte_t pte)
|
2014-06-23 20:22:03 +00:00
|
|
|
{
|
|
|
|
swp_entry_t swp;
|
|
|
|
|
|
|
|
if (huge_pte_none(pte) || pte_present(pte))
|
2017-07-06 22:38:47 +00:00
|
|
|
return false;
|
2014-06-23 20:22:03 +00:00
|
|
|
swp = pte_to_swp_entry(pte);
|
2020-10-13 23:56:14 +00:00
|
|
|
if (is_migration_entry(swp))
|
2017-07-06 22:38:47 +00:00
|
|
|
return true;
|
2014-06-23 20:22:03 +00:00
|
|
|
else
|
2017-07-06 22:38:47 +00:00
|
|
|
return false;
|
2014-06-23 20:22:03 +00:00
|
|
|
}
|
|
|
|
|
2023-08-21 14:15:14 +00:00
|
|
|
bool is_hugetlb_entry_hwpoisoned(pte_t pte)
|
2014-06-23 20:22:03 +00:00
|
|
|
{
|
|
|
|
swp_entry_t swp;
|
|
|
|
|
|
|
|
if (huge_pte_none(pte) || pte_present(pte))
|
2020-10-13 23:56:10 +00:00
|
|
|
return false;
|
2014-06-23 20:22:03 +00:00
|
|
|
swp = pte_to_swp_entry(pte);
|
2020-10-13 23:56:14 +00:00
|
|
|
if (is_hwpoison_entry(swp))
|
2020-10-13 23:56:10 +00:00
|
|
|
return true;
|
2014-06-23 20:22:03 +00:00
|
|
|
else
|
2020-10-13 23:56:10 +00:00
|
|
|
return false;
|
2014-06-23 20:22:03 +00:00
|
|
|
}
|
2006-01-06 08:10:44 +00:00
|
|
|
|
2021-03-13 05:07:33 +00:00
|
|
|
static void
|
2023-01-25 17:05:30 +00:00
|
|
|
hugetlb_install_folio(struct vm_area_struct *vma, pte_t *ptep, unsigned long addr,
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
struct folio *new_folio, pte_t old, unsigned long sz)
|
2021-03-13 05:07:33 +00:00
|
|
|
{
|
2023-04-17 19:53:12 +00:00
|
|
|
pte_t newpte = make_huge_pte(vma, &new_folio->page, 1);
|
|
|
|
|
2023-01-25 17:05:30 +00:00
|
|
|
__folio_mark_uptodate(new_folio);
|
mm/rmap: rename hugepage_add* to hugetlb_add*
Patch series "mm/rmap: interface overhaul", v2.
This series overhauls the rmap interface, to get rid of the "bool
compound" / RMAP_COMPOUND parameter with the goal of making the interface
less error prone, more future proof, and more natural to extend to
"batching". Also, this converts the interface to always consume
folio+subpage, which speeds up operations on large folios.
Further, this series adds PTE-batching variants for 4 rmap functions,
whereby only folio_add_anon_rmap_ptes() is used for batching in this
series when PTE-remapping a PMD-mapped THP. folio_remove_rmap_ptes(),
folio_try_dup_anon_rmap_ptes() and folio_dup_file_rmap_ptes() will soon
come in handy[1,2].
This series performs a lot of folio conversion along the way. Most of the
added LOC in the diff are only due to documentation.
As we're moving to a pte/pmd interface where we clearly express the
mapping granularity we are dealing with, we first get the remainder of
hugetlb out of the way, as it is special and expected to remain special:
it treats everything as a "single logical PTE" and only currently allows
entire mappings.
Even if we'd ever support partial mappings, I strongly assume the
interface and implementation will still differ heavily: hopefull we can
avoid working on subpages/subpage mapcounts completely and only add a
"count" parameter for them to enable batching.
New (extended) hugetlb interface that operates on entire folio:
* hugetlb_add_new_anon_rmap() -> Already existed
* hugetlb_add_anon_rmap() -> Already existed
* hugetlb_try_dup_anon_rmap()
* hugetlb_try_share_anon_rmap()
* hugetlb_add_file_rmap()
* hugetlb_remove_rmap()
New "ordinary" interface for small folios / THP::
* folio_add_new_anon_rmap() -> Already existed
* folio_add_anon_rmap_[pte|ptes|pmd]()
* folio_try_dup_anon_rmap_[pte|ptes|pmd]()
* folio_try_share_anon_rmap_[pte|pmd]()
* folio_add_file_rmap_[pte|ptes|pmd]()
* folio_dup_file_rmap_[pte|ptes|pmd]()
* folio_remove_rmap_[pte|ptes|pmd]()
folio_add_new_anon_rmap() will always map at the largest granularity
possible (currently, a single PMD to cover a PMD-sized THP). Could be
extended if ever required.
In the future, we might want "_pud" variants and eventually "_pmds"
variants for batching.
I ran some simple microbenchmarks on an Intel(R) Xeon(R) Silver 4210R:
measuring munmap(), fork(), cow, MADV_DONTNEED on each PTE ... and PTE
remapping PMD-mapped THPs on 1 GiB of memory.
For small folios, there is barely a change (< 1% improvement for me).
For PTE-mapped THP:
* PTE-remapping a PMD-mapped THP is more than 10% faster.
* fork() is more than 4% faster.
* MADV_DONTNEED is 2% faster
* COW when writing only a single byte on a COW-shared PTE is 1% faster
* munmap() barely changes (< 1%).
[1] https://lkml.kernel.org/r/20230810103332.3062143-1-ryan.roberts@arm.com
[2] https://lkml.kernel.org/r/20231204105440.61448-1-ryan.roberts@arm.com
This patch (of 40):
Let's just call it "hugetlb_".
Yes, it's all already inconsistent and confusing because we have a lot of
"hugepage_" functions for legacy reasons. But "hugetlb" cannot possibly
be confused with transparent huge pages, and it matches "hugetlb.c" and
"folio_test_hugetlb()". So let's minimize confusion in rmap code.
Link: https://lkml.kernel.org/r/20231220224504.646757-1-david@redhat.com
Link: https://lkml.kernel.org/r/20231220224504.646757-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20 22:44:25 +00:00
|
|
|
hugetlb_add_new_anon_rmap(new_folio, vma, addr);
|
2023-04-17 19:53:12 +00:00
|
|
|
if (userfaultfd_wp(vma) && huge_pte_uffd_wp(old))
|
|
|
|
newpte = huge_pte_mkuffd_wp(newpte);
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
set_huge_pte_at(vma->vm_mm, addr, ptep, newpte, sz);
|
2021-03-13 05:07:33 +00:00
|
|
|
hugetlb_count_add(pages_per_huge_page(hstate_vma(vma)), vma->vm_mm);
|
2023-01-25 17:05:30 +00:00
|
|
|
folio_set_hugetlb_migratable(new_folio);
|
2021-03-13 05:07:33 +00:00
|
|
|
}
|
|
|
|
|
2005-06-22 00:14:44 +00:00
|
|
|
int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src,
|
2022-05-13 03:22:55 +00:00
|
|
|
struct vm_area_struct *dst_vma,
|
|
|
|
struct vm_area_struct *src_vma)
|
2005-06-22 00:14:44 +00:00
|
|
|
{
|
2022-08-16 13:05:53 +00:00
|
|
|
pte_t *src_pte, *dst_pte, entry;
|
2023-06-06 06:20:11 +00:00
|
|
|
struct folio *pte_folio;
|
2005-10-20 04:23:43 +00:00
|
|
|
unsigned long addr;
|
2022-05-13 03:22:55 +00:00
|
|
|
bool cow = is_cow_mapping(src_vma->vm_flags);
|
|
|
|
struct hstate *h = hstate_vma(src_vma);
|
2008-07-24 04:27:41 +00:00
|
|
|
unsigned long sz = huge_page_size(h);
|
2021-03-13 05:07:33 +00:00
|
|
|
unsigned long npages = pages_per_huge_page(h);
|
2018-12-28 08:38:09 +00:00
|
|
|
struct mmu_notifier_range range;
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
unsigned long last_addr_mask;
|
2014-01-21 23:49:09 +00:00
|
|
|
int ret = 0;
|
2006-01-06 08:10:44 +00:00
|
|
|
|
2018-12-28 08:38:09 +00:00
|
|
|
if (cow) {
|
2023-01-10 02:57:22 +00:00
|
|
|
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, src,
|
2022-05-13 03:22:55 +00:00
|
|
|
src_vma->vm_start,
|
|
|
|
src_vma->vm_end);
|
2018-12-28 08:38:09 +00:00
|
|
|
mmu_notifier_invalidate_range_start(&range);
|
2023-08-04 15:27:21 +00:00
|
|
|
vma_assert_write_locked(src_vma);
|
2022-05-10 01:20:42 +00:00
|
|
|
raw_write_seqcount_begin(&src->write_protect_seq);
|
2022-09-14 22:18:09 +00:00
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* For shared mappings the vma lock must be held before
|
2022-12-16 15:52:29 +00:00
|
|
|
* calling hugetlb_walk() in the src vma. Otherwise, the
|
2022-09-14 22:18:09 +00:00
|
|
|
* returned ptep could go away if part of a shared pmd and
|
|
|
|
* another thread calls huge_pmd_unshare.
|
|
|
|
*/
|
|
|
|
hugetlb_vma_lock_read(src_vma);
|
2018-12-28 08:38:09 +00:00
|
|
|
}
|
2014-01-21 23:49:09 +00:00
|
|
|
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
last_addr_mask = hugetlb_mask_last_page(h);
|
2022-05-13 03:22:55 +00:00
|
|
|
for (addr = src_vma->vm_start; addr < src_vma->vm_end; addr += sz) {
|
2013-11-14 22:31:02 +00:00
|
|
|
spinlock_t *src_ptl, *dst_ptl;
|
2022-12-16 15:52:29 +00:00
|
|
|
src_pte = hugetlb_walk(src_vma, addr, sz);
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
if (!src_pte) {
|
|
|
|
addr |= last_addr_mask;
|
2005-10-30 01:16:23 +00:00
|
|
|
continue;
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
}
|
2022-05-13 03:22:55 +00:00
|
|
|
dst_pte = huge_pte_alloc(dst, dst_vma, addr, sz);
|
2014-01-21 23:49:09 +00:00
|
|
|
if (!dst_pte) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
break;
|
|
|
|
}
|
2008-01-24 13:49:25 +00:00
|
|
|
|
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-16 23:08:04 +00:00
|
|
|
/*
|
|
|
|
* If the pagetables are shared don't copy or take references.
|
|
|
|
*
|
2022-08-16 13:05:53 +00:00
|
|
|
* dst_pte == src_pte is the common case of src/dest sharing.
|
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-16 23:08:04 +00:00
|
|
|
* However, src could have 'unshared' and dst shares with
|
2022-08-16 13:05:53 +00:00
|
|
|
* another vma. So page_count of ptep page is checked instead
|
|
|
|
* to reliably determine whether pte is shared.
|
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-16 23:08:04 +00:00
|
|
|
*/
|
2022-08-16 13:05:53 +00:00
|
|
|
if (page_count(virt_to_page(dst_pte)) > 1) {
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
addr |= last_addr_mask;
|
2008-01-24 13:49:25 +00:00
|
|
|
continue;
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
}
|
2008-01-24 13:49:25 +00:00
|
|
|
|
2013-11-14 22:31:02 +00:00
|
|
|
dst_ptl = huge_pte_lock(h, dst, dst_pte);
|
|
|
|
src_ptl = huge_pte_lockptr(h, src, src_pte);
|
|
|
|
spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
|
2024-07-02 13:51:20 +00:00
|
|
|
entry = huge_ptep_get(src_vma->vm_mm, addr, src_pte);
|
2021-03-13 05:07:33 +00:00
|
|
|
again:
|
2022-08-16 13:05:53 +00:00
|
|
|
if (huge_pte_none(entry)) {
|
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-16 23:08:04 +00:00
|
|
|
/*
|
2022-08-16 13:05:53 +00:00
|
|
|
* Skip if src entry none.
|
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-16 23:08:04 +00:00
|
|
|
*/
|
2014-06-23 20:22:03 +00:00
|
|
|
;
|
2022-07-04 01:33:05 +00:00
|
|
|
} else if (unlikely(is_hugetlb_entry_hwpoisoned(entry))) {
|
2023-04-17 19:53:12 +00:00
|
|
|
if (!userfaultfd_wp(dst_vma))
|
2022-07-04 01:33:05 +00:00
|
|
|
entry = huge_pte_clear_uffd_wp(entry);
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
set_huge_pte_at(dst, addr, dst_pte, entry, sz);
|
2022-07-04 01:33:05 +00:00
|
|
|
} else if (unlikely(is_hugetlb_entry_migration(entry))) {
|
2014-06-23 20:22:03 +00:00
|
|
|
swp_entry_t swp_entry = pte_to_swp_entry(entry);
|
2023-04-17 19:53:12 +00:00
|
|
|
bool uffd_wp = pte_swp_uffd_wp(entry);
|
2014-06-23 20:22:03 +00:00
|
|
|
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
|
|
|
if (!is_readable_migration_entry(swp_entry) && cow) {
|
2014-06-23 20:22:03 +00:00
|
|
|
/*
|
|
|
|
* COW mappings require pages in both
|
|
|
|
* parent and child to be set to read.
|
|
|
|
*/
|
2021-07-01 01:54:09 +00:00
|
|
|
swp_entry = make_readable_migration_entry(
|
|
|
|
swp_offset(swp_entry));
|
2014-06-23 20:22:03 +00:00
|
|
|
entry = swp_entry_to_pte(swp_entry);
|
2022-05-13 03:22:55 +00:00
|
|
|
if (userfaultfd_wp(src_vma) && uffd_wp)
|
2023-04-17 19:53:12 +00:00
|
|
|
entry = pte_swp_mkuffd_wp(entry);
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
set_huge_pte_at(src, addr, src_pte, entry, sz);
|
2014-06-23 20:22:03 +00:00
|
|
|
}
|
2023-04-17 19:53:12 +00:00
|
|
|
if (!userfaultfd_wp(dst_vma))
|
2022-05-13 03:22:55 +00:00
|
|
|
entry = huge_pte_clear_uffd_wp(entry);
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
set_huge_pte_at(dst, addr, dst_pte, entry, sz);
|
2022-05-13 03:22:55 +00:00
|
|
|
} else if (unlikely(is_pte_marker(entry))) {
|
mm: make PTE_MARKER_SWAPIN_ERROR more general
Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.
This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.
This patch (of 8):
Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:
First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.
Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.
For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.
Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.
Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
|
|
|
pte_marker marker = copy_pte_marker(
|
|
|
|
pte_to_swp_entry(entry), dst_vma);
|
|
|
|
|
|
|
|
if (marker)
|
|
|
|
set_huge_pte_at(dst, addr, dst_pte,
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
make_pte_marker(marker), sz);
|
2014-06-23 20:22:03 +00:00
|
|
|
} else {
|
2024-07-02 13:51:20 +00:00
|
|
|
entry = huge_ptep_get(src_vma->vm_mm, addr, src_pte);
|
2023-06-06 06:20:11 +00:00
|
|
|
pte_folio = page_folio(pte_page(entry));
|
|
|
|
folio_get(pte_folio);
|
2021-03-13 05:07:33 +00:00
|
|
|
|
|
|
|
/*
|
2022-05-10 01:20:43 +00:00
|
|
|
* Failing to duplicate the anon rmap is a rare case
|
|
|
|
* where we see pinned hugetlb pages while they're
|
|
|
|
* prone to COW. We need to do the COW earlier during
|
|
|
|
* fork.
|
2021-03-13 05:07:33 +00:00
|
|
|
*
|
|
|
|
* When pre-allocating the page or copying data, we
|
|
|
|
* need to be without the pgtable locks since we could
|
|
|
|
* sleep during the process.
|
|
|
|
*/
|
2023-06-06 06:20:11 +00:00
|
|
|
if (!folio_test_anon(pte_folio)) {
|
2023-12-20 22:44:27 +00:00
|
|
|
hugetlb_add_file_rmap(pte_folio);
|
2023-12-20 22:44:28 +00:00
|
|
|
} else if (hugetlb_try_dup_anon_rmap(pte_folio, src_vma)) {
|
2021-03-13 05:07:33 +00:00
|
|
|
pte_t src_pte_old = entry;
|
2023-01-25 17:05:33 +00:00
|
|
|
struct folio *new_folio;
|
2021-03-13 05:07:33 +00:00
|
|
|
|
|
|
|
spin_unlock(src_ptl);
|
|
|
|
spin_unlock(dst_ptl);
|
|
|
|
/* Do not use reserve as it's private owned */
|
2023-01-25 17:05:33 +00:00
|
|
|
new_folio = alloc_hugetlb_folio(dst_vma, addr, 1);
|
|
|
|
if (IS_ERR(new_folio)) {
|
2023-06-06 06:20:11 +00:00
|
|
|
folio_put(pte_folio);
|
2023-01-25 17:05:33 +00:00
|
|
|
ret = PTR_ERR(new_folio);
|
2021-03-13 05:07:33 +00:00
|
|
|
break;
|
|
|
|
}
|
2024-06-18 09:12:41 +00:00
|
|
|
ret = copy_user_large_folio(new_folio, pte_folio,
|
|
|
|
ALIGN_DOWN(addr, sz), dst_vma);
|
2023-06-06 06:20:11 +00:00
|
|
|
folio_put(pte_folio);
|
2023-04-13 13:13:49 +00:00
|
|
|
if (ret) {
|
|
|
|
folio_put(new_folio);
|
|
|
|
break;
|
|
|
|
}
|
2021-03-13 05:07:33 +00:00
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
/* Install the new hugetlb folio if src pte stable */
|
2021-03-13 05:07:33 +00:00
|
|
|
dst_ptl = huge_pte_lock(h, dst, dst_pte);
|
|
|
|
src_ptl = huge_pte_lockptr(h, src, src_pte);
|
|
|
|
spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
|
2024-07-02 13:51:20 +00:00
|
|
|
entry = huge_ptep_get(src_vma->vm_mm, addr, src_pte);
|
2021-03-13 05:07:33 +00:00
|
|
|
if (!pte_same(src_pte_old, entry)) {
|
2022-05-13 03:22:55 +00:00
|
|
|
restore_reserve_on_error(h, dst_vma, addr,
|
2023-01-25 17:05:34 +00:00
|
|
|
new_folio);
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_put(new_folio);
|
2022-08-16 13:05:53 +00:00
|
|
|
/* huge_ptep of dst_pte won't change as in child */
|
2021-03-13 05:07:33 +00:00
|
|
|
goto again;
|
|
|
|
}
|
2023-04-17 19:53:12 +00:00
|
|
|
hugetlb_install_folio(dst_vma, dst_pte, addr,
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
new_folio, src_pte_old, sz);
|
2021-03-13 05:07:33 +00:00
|
|
|
spin_unlock(src_ptl);
|
|
|
|
spin_unlock(dst_ptl);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2014-11-13 02:46:09 +00:00
|
|
|
if (cow) {
|
2017-11-16 01:34:07 +00:00
|
|
|
/*
|
|
|
|
* No need to notify as we are downgrading page
|
|
|
|
* table protection not changing it to point
|
|
|
|
* to a new page.
|
|
|
|
*
|
2022-06-27 06:00:26 +00:00
|
|
|
* See Documentation/mm/mmu_notifier.rst
|
2017-11-16 01:34:07 +00:00
|
|
|
*/
|
2008-04-28 09:13:29 +00:00
|
|
|
huge_ptep_set_wrprotect(src, addr, src_pte);
|
2021-05-15 00:27:07 +00:00
|
|
|
entry = huge_pte_wrprotect(entry);
|
2014-11-13 02:46:09 +00:00
|
|
|
}
|
2021-03-13 05:07:33 +00:00
|
|
|
|
2023-04-17 19:53:12 +00:00
|
|
|
if (!userfaultfd_wp(dst_vma))
|
|
|
|
entry = huge_pte_clear_uffd_wp(entry);
|
|
|
|
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
set_huge_pte_at(dst, addr, dst_pte, entry, sz);
|
2021-03-13 05:07:33 +00:00
|
|
|
hugetlb_count_add(npages, dst);
|
2005-10-20 04:23:43 +00:00
|
|
|
}
|
2013-11-14 22:31:02 +00:00
|
|
|
spin_unlock(src_ptl);
|
|
|
|
spin_unlock(dst_ptl);
|
2005-06-22 00:14:44 +00:00
|
|
|
}
|
|
|
|
|
2022-05-10 01:20:42 +00:00
|
|
|
if (cow) {
|
|
|
|
raw_write_seqcount_end(&src->write_protect_seq);
|
2018-12-28 08:38:09 +00:00
|
|
|
mmu_notifier_invalidate_range_end(&range);
|
2022-09-14 22:18:09 +00:00
|
|
|
} else {
|
|
|
|
hugetlb_vma_unlock_read(src_vma);
|
2022-05-10 01:20:42 +00:00
|
|
|
}
|
2014-01-21 23:49:09 +00:00
|
|
|
|
|
|
|
return ret;
|
2005-06-22 00:14:44 +00:00
|
|
|
}
|
|
|
|
|
2021-11-05 20:41:40 +00:00
|
|
|
static void move_huge_pte(struct vm_area_struct *vma, unsigned long old_addr,
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
unsigned long new_addr, pte_t *src_pte, pte_t *dst_pte,
|
|
|
|
unsigned long sz)
|
2021-11-05 20:41:40 +00:00
|
|
|
{
|
|
|
|
struct hstate *h = hstate_vma(vma);
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
spinlock_t *src_ptl, *dst_ptl;
|
2022-02-26 03:10:56 +00:00
|
|
|
pte_t pte;
|
2021-11-05 20:41:40 +00:00
|
|
|
|
|
|
|
dst_ptl = huge_pte_lock(h, mm, dst_pte);
|
|
|
|
src_ptl = huge_pte_lockptr(h, mm, src_pte);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We don't have to worry about the ordering of src and dst ptlocks
|
2023-01-07 00:00:05 +00:00
|
|
|
* because exclusive mmap_lock (or the i_mmap_lock) prevents deadlock.
|
2021-11-05 20:41:40 +00:00
|
|
|
*/
|
|
|
|
if (src_ptl != dst_ptl)
|
|
|
|
spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
|
|
|
|
|
|
|
|
pte = huge_ptep_get_and_clear(mm, old_addr, src_pte);
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
set_huge_pte_at(mm, new_addr, dst_pte, pte, sz);
|
2021-11-05 20:41:40 +00:00
|
|
|
|
|
|
|
if (src_ptl != dst_ptl)
|
|
|
|
spin_unlock(src_ptl);
|
|
|
|
spin_unlock(dst_ptl);
|
|
|
|
}
|
|
|
|
|
|
|
|
int move_hugetlb_page_tables(struct vm_area_struct *vma,
|
|
|
|
struct vm_area_struct *new_vma,
|
|
|
|
unsigned long old_addr, unsigned long new_addr,
|
|
|
|
unsigned long len)
|
|
|
|
{
|
|
|
|
struct hstate *h = hstate_vma(vma);
|
|
|
|
struct address_space *mapping = vma->vm_file->f_mapping;
|
|
|
|
unsigned long sz = huge_page_size(h);
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
unsigned long old_end = old_addr + len;
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
unsigned long last_addr_mask;
|
2021-11-05 20:41:40 +00:00
|
|
|
pte_t *src_pte, *dst_pte;
|
|
|
|
struct mmu_notifier_range range;
|
2022-05-10 01:20:52 +00:00
|
|
|
bool shared_pmd = false;
|
2021-11-05 20:41:40 +00:00
|
|
|
|
2023-01-10 02:57:22 +00:00
|
|
|
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, mm, old_addr,
|
2021-11-05 20:41:40 +00:00
|
|
|
old_end);
|
|
|
|
adjust_range_if_pmd_sharing_possible(vma, &range.start, &range.end);
|
2022-05-10 01:20:52 +00:00
|
|
|
/*
|
|
|
|
* In case of shared PMDs, we should cover the maximum possible
|
|
|
|
* range.
|
|
|
|
*/
|
|
|
|
flush_cache_range(vma, range.start, range.end);
|
|
|
|
|
2021-11-05 20:41:40 +00:00
|
|
|
mmu_notifier_invalidate_range_start(&range);
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
last_addr_mask = hugetlb_mask_last_page(h);
|
2021-11-05 20:41:40 +00:00
|
|
|
/* Prevent race with file truncation */
|
2022-09-14 22:18:09 +00:00
|
|
|
hugetlb_vma_lock_write(vma);
|
2021-11-05 20:41:40 +00:00
|
|
|
i_mmap_lock_write(mapping);
|
|
|
|
for (; old_addr < old_end; old_addr += sz, new_addr += sz) {
|
2022-12-16 15:52:29 +00:00
|
|
|
src_pte = hugetlb_walk(vma, old_addr, sz);
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
if (!src_pte) {
|
|
|
|
old_addr |= last_addr_mask;
|
|
|
|
new_addr |= last_addr_mask;
|
2021-11-05 20:41:40 +00:00
|
|
|
continue;
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
}
|
2024-07-02 13:51:20 +00:00
|
|
|
if (huge_pte_none(huge_ptep_get(mm, old_addr, src_pte)))
|
2021-11-05 20:41:40 +00:00
|
|
|
continue;
|
|
|
|
|
2022-06-21 23:56:19 +00:00
|
|
|
if (huge_pmd_unshare(mm, vma, old_addr, src_pte)) {
|
2022-05-10 01:20:52 +00:00
|
|
|
shared_pmd = true;
|
2022-06-21 23:56:19 +00:00
|
|
|
old_addr |= last_addr_mask;
|
|
|
|
new_addr |= last_addr_mask;
|
2021-11-05 20:41:40 +00:00
|
|
|
continue;
|
2022-05-10 01:20:52 +00:00
|
|
|
}
|
2021-11-05 20:41:40 +00:00
|
|
|
|
|
|
|
dst_pte = huge_pte_alloc(mm, new_vma, new_addr, sz);
|
|
|
|
if (!dst_pte)
|
|
|
|
break;
|
|
|
|
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
move_huge_pte(vma, old_addr, new_addr, src_pte, dst_pte, sz);
|
2021-11-05 20:41:40 +00:00
|
|
|
}
|
2022-05-10 01:20:52 +00:00
|
|
|
|
|
|
|
if (shared_pmd)
|
2023-08-01 02:31:44 +00:00
|
|
|
flush_hugetlb_tlb_range(vma, range.start, range.end);
|
2022-05-10 01:20:52 +00:00
|
|
|
else
|
2023-08-01 02:31:44 +00:00
|
|
|
flush_hugetlb_tlb_range(vma, old_end - len, old_end);
|
2021-11-05 20:41:40 +00:00
|
|
|
mmu_notifier_invalidate_range_end(&range);
|
2021-11-21 20:40:08 +00:00
|
|
|
i_mmap_unlock_write(mapping);
|
2022-09-14 22:18:09 +00:00
|
|
|
hugetlb_vma_unlock_write(vma);
|
2021-11-05 20:41:40 +00:00
|
|
|
|
|
|
|
return len + old_addr - old_end;
|
|
|
|
}
|
|
|
|
|
2023-10-06 03:59:08 +00:00
|
|
|
void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma,
|
|
|
|
unsigned long start, unsigned long end,
|
|
|
|
struct page *ref_page, zap_flags_t zap_flags)
|
2005-06-22 00:14:44 +00:00
|
|
|
{
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
unsigned long address;
|
2005-08-05 18:59:35 +00:00
|
|
|
pte_t *ptep;
|
2005-06-22 00:14:44 +00:00
|
|
|
pte_t pte;
|
2013-11-14 22:31:02 +00:00
|
|
|
spinlock_t *ptl;
|
2005-06-22 00:14:44 +00:00
|
|
|
struct page *page;
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = hstate_vma(vma);
|
|
|
|
unsigned long sz = huge_page_size(h);
|
mm/hugetlb: restore the reservation if needed
Patch series "mm/hugetlb: Restore the reservation", v2.
This is a fix for a case where a backing huge page could stolen after
madvise(MADV_DONTNEED).
A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/
In order to test this patch, I instrumented the kernel with LOCKDEP and
KASAN, and run the following tests, without any regression:
* The self test that reproduces the problem
* All mm hugetlb selftests
SUMMARY: PASS=9 SKIP=0 FAIL=0
* All libhugetlbfs tests
PASS: 0 86
FAIL: 0 0
This patch (of 2):
Currently there is a bug that a huge page could be stolen, and when the
original owner tries to fault in it, it causes a page fault.
You can achieve that by:
1) Creating a single page
echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
2) mmap() the page above with MAP_HUGETLB into (void *ptr1).
* This will mark the page as reserved
3) touch the page, which causes a page fault and allocates the page
* This will move the page out of the free list.
* It will also unreserved the page, since there is no more free
page
4) madvise(MADV_DONTNEED) the page
* This will free the page, but not mark it as reserved.
5) Allocate a secondary page with mmap(MAP_HUGETLB) into (void *ptr2).
* it should fail, but, since there is no more available page.
* But, since the page above is not reserved, this mmap() succeed.
6) Faulting at ptr1 will cause a SIGBUS
* it will try to allocate a huge page, but there is none
available
A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/
Fix this by restoring the reserved page if necessary.
These are the condition for the page restore:
* The system is not using surplus pages. The goal is to reduce the
surplus usage for this case.
* If the VMA has the HPAGE_RESV_OWNER flag set, and is PRIVATE. This is
safely checked using __vma_private_lock()
* The page is anonymous
Once this is scenario is found, set the `hugetlb_restore_reserve` bit in
the folio. Then check if the resv reservations need to be adjusted
later, done later, after the spinlock, since the vma_xxxx_reservation()
might touch the file system lock.
Link: https://lkml.kernel.org/r/20240205191843.4009640-1-leitao@debian.org
Link: https://lkml.kernel.org/r/20240205191843.4009640-2-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-05 19:18:41 +00:00
|
|
|
bool adjust_reservation = false;
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
unsigned long last_addr_mask;
|
2021-11-21 20:40:07 +00:00
|
|
|
bool force_flush = false;
|
2008-07-24 04:27:41 +00:00
|
|
|
|
2005-06-22 00:14:44 +00:00
|
|
|
WARN_ON(!is_vm_hugetlb_page(vma));
|
2008-07-24 04:27:41 +00:00
|
|
|
BUG_ON(start & ~huge_page_mask(h));
|
|
|
|
BUG_ON(end & ~huge_page_mask(h));
|
2005-06-22 00:14:44 +00:00
|
|
|
|
2016-12-13 00:42:40 +00:00
|
|
|
/*
|
|
|
|
* This is a hugetlb vma, all the pte entries should point
|
|
|
|
* to huge page.
|
|
|
|
*/
|
2018-08-31 12:46:08 +00:00
|
|
|
tlb_change_page_size(tlb, sz);
|
2012-07-31 23:42:03 +00:00
|
|
|
tlb_start_vma(tlb, vma);
|
2018-10-05 22:51:33 +00:00
|
|
|
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
last_addr_mask = hugetlb_mask_last_page(h);
|
2014-12-10 23:44:41 +00:00
|
|
|
address = start;
|
|
|
|
for (; address < end; address += sz) {
|
2022-12-16 15:52:29 +00:00
|
|
|
ptep = hugetlb_walk(vma, address, sz);
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
if (!ptep) {
|
|
|
|
address |= last_addr_mask;
|
2005-08-05 18:59:35 +00:00
|
|
|
continue;
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
}
|
2005-08-05 18:59:35 +00:00
|
|
|
|
2013-11-14 22:31:02 +00:00
|
|
|
ptl = huge_pte_lock(h, mm, ptep);
|
2022-06-21 23:56:19 +00:00
|
|
|
if (huge_pmd_unshare(mm, vma, address, ptep)) {
|
2016-07-26 22:24:06 +00:00
|
|
|
spin_unlock(ptl);
|
2021-11-21 20:40:07 +00:00
|
|
|
tlb_flush_pmd_range(tlb, address & PUD_MASK, PUD_SIZE);
|
|
|
|
force_flush = true;
|
2022-06-21 23:56:19 +00:00
|
|
|
address |= last_addr_mask;
|
2016-07-26 22:24:06 +00:00
|
|
|
continue;
|
|
|
|
}
|
2006-12-07 04:32:03 +00:00
|
|
|
|
2024-07-02 13:51:20 +00:00
|
|
|
pte = huge_ptep_get(mm, address, ptep);
|
2016-07-26 22:24:06 +00:00
|
|
|
if (huge_pte_none(pte)) {
|
|
|
|
spin_unlock(ptl);
|
|
|
|
continue;
|
|
|
|
}
|
2012-03-23 22:01:48 +00:00
|
|
|
|
|
|
|
/*
|
2015-02-11 23:25:32 +00:00
|
|
|
* Migrating hugepage or HWPoisoned hugepage is already
|
|
|
|
* unmapped and its refcount is dropped, so just clear pte here.
|
2012-03-23 22:01:48 +00:00
|
|
|
*/
|
2015-02-11 23:25:32 +00:00
|
|
|
if (unlikely(!pte_present(pte))) {
|
2022-05-13 03:22:55 +00:00
|
|
|
/*
|
|
|
|
* If the pte was wr-protected by uffd-wp in any of the
|
|
|
|
* swap forms, meanwhile the caller does not want to
|
|
|
|
* drop the uffd-wp bit in this zap, then replace the
|
|
|
|
* pte with a marker.
|
|
|
|
*/
|
|
|
|
if (pte_swp_uffd_wp_any(pte) &&
|
|
|
|
!(zap_flags & ZAP_FLAG_DROP_MARKER))
|
|
|
|
set_huge_pte_at(mm, address, ptep,
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
make_pte_marker(PTE_MARKER_UFFD_WP),
|
|
|
|
sz);
|
2022-05-13 03:22:55 +00:00
|
|
|
else
|
|
|
|
huge_pte_clear(mm, address, ptep, sz);
|
2016-07-26 22:24:06 +00:00
|
|
|
spin_unlock(ptl);
|
|
|
|
continue;
|
2012-12-12 21:52:28 +00:00
|
|
|
}
|
2012-03-23 22:01:48 +00:00
|
|
|
|
|
|
|
page = pte_page(pte);
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
/*
|
|
|
|
* If a reference page is supplied, it is because a specific
|
|
|
|
* page is being unmapped, not a range. Ensure the page we
|
|
|
|
* are about to unmap is the actual page of interest.
|
|
|
|
*/
|
|
|
|
if (ref_page) {
|
2016-07-26 22:24:06 +00:00
|
|
|
if (page != ref_page) {
|
|
|
|
spin_unlock(ptl);
|
|
|
|
continue;
|
|
|
|
}
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
/*
|
|
|
|
* Mark the VMA as having unmapped its page so that
|
|
|
|
* future faults in this VMA will fail rather than
|
|
|
|
* looking like data was lost
|
|
|
|
*/
|
|
|
|
set_vma_resv_flags(vma, HPAGE_RESV_UNMAPPED);
|
|
|
|
}
|
|
|
|
|
2005-08-05 18:59:35 +00:00
|
|
|
pte = huge_ptep_get_and_clear(mm, address, ptep);
|
2016-12-13 00:42:37 +00:00
|
|
|
tlb_remove_huge_tlb_entry(h, tlb, ptep, address);
|
2013-04-29 22:07:23 +00:00
|
|
|
if (huge_pte_dirty(pte))
|
2007-02-08 22:20:27 +00:00
|
|
|
set_page_dirty(page);
|
2022-05-13 03:22:55 +00:00
|
|
|
/* Leave a uffd-wp pte marker if needed */
|
|
|
|
if (huge_pte_uffd_wp(pte) &&
|
|
|
|
!(zap_flags & ZAP_FLAG_DROP_MARKER))
|
|
|
|
set_huge_pte_at(mm, address, ptep,
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
make_pte_marker(PTE_MARKER_UFFD_WP),
|
|
|
|
sz);
|
2015-11-06 02:47:14 +00:00
|
|
|
hugetlb_count_sub(pages_per_huge_page(h), mm);
|
2023-12-20 22:44:26 +00:00
|
|
|
hugetlb_remove_rmap(page_folio(page));
|
2016-07-26 22:24:06 +00:00
|
|
|
|
mm/hugetlb: restore the reservation if needed
Patch series "mm/hugetlb: Restore the reservation", v2.
This is a fix for a case where a backing huge page could stolen after
madvise(MADV_DONTNEED).
A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/
In order to test this patch, I instrumented the kernel with LOCKDEP and
KASAN, and run the following tests, without any regression:
* The self test that reproduces the problem
* All mm hugetlb selftests
SUMMARY: PASS=9 SKIP=0 FAIL=0
* All libhugetlbfs tests
PASS: 0 86
FAIL: 0 0
This patch (of 2):
Currently there is a bug that a huge page could be stolen, and when the
original owner tries to fault in it, it causes a page fault.
You can achieve that by:
1) Creating a single page
echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
2) mmap() the page above with MAP_HUGETLB into (void *ptr1).
* This will mark the page as reserved
3) touch the page, which causes a page fault and allocates the page
* This will move the page out of the free list.
* It will also unreserved the page, since there is no more free
page
4) madvise(MADV_DONTNEED) the page
* This will free the page, but not mark it as reserved.
5) Allocate a secondary page with mmap(MAP_HUGETLB) into (void *ptr2).
* it should fail, but, since there is no more available page.
* But, since the page above is not reserved, this mmap() succeed.
6) Faulting at ptr1 will cause a SIGBUS
* it will try to allocate a huge page, but there is none
available
A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/
Fix this by restoring the reserved page if necessary.
These are the condition for the page restore:
* The system is not using surplus pages. The goal is to reduce the
surplus usage for this case.
* If the VMA has the HPAGE_RESV_OWNER flag set, and is PRIVATE. This is
safely checked using __vma_private_lock()
* The page is anonymous
Once this is scenario is found, set the `hugetlb_restore_reserve` bit in
the folio. Then check if the resv reservations need to be adjusted
later, done later, after the spinlock, since the vma_xxxx_reservation()
might touch the file system lock.
Link: https://lkml.kernel.org/r/20240205191843.4009640-1-leitao@debian.org
Link: https://lkml.kernel.org/r/20240205191843.4009640-2-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-05 19:18:41 +00:00
|
|
|
/*
|
|
|
|
* Restore the reservation for anonymous page, otherwise the
|
|
|
|
* backing page could be stolen by someone.
|
|
|
|
* If there we are freeing a surplus, do not set the restore
|
|
|
|
* reservation bit.
|
|
|
|
*/
|
|
|
|
if (!h->surplus_huge_pages && __vma_private_lock(vma) &&
|
|
|
|
folio_test_anon(page_folio(page))) {
|
|
|
|
folio_set_hugetlb_restore_reserve(page_folio(page));
|
|
|
|
/* Reservation to be adjusted after the spin lock */
|
|
|
|
adjust_reservation = true;
|
|
|
|
}
|
|
|
|
|
2013-11-14 22:31:02 +00:00
|
|
|
spin_unlock(ptl);
|
mm/hugetlb: restore the reservation if needed
Patch series "mm/hugetlb: Restore the reservation", v2.
This is a fix for a case where a backing huge page could stolen after
madvise(MADV_DONTNEED).
A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/
In order to test this patch, I instrumented the kernel with LOCKDEP and
KASAN, and run the following tests, without any regression:
* The self test that reproduces the problem
* All mm hugetlb selftests
SUMMARY: PASS=9 SKIP=0 FAIL=0
* All libhugetlbfs tests
PASS: 0 86
FAIL: 0 0
This patch (of 2):
Currently there is a bug that a huge page could be stolen, and when the
original owner tries to fault in it, it causes a page fault.
You can achieve that by:
1) Creating a single page
echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
2) mmap() the page above with MAP_HUGETLB into (void *ptr1).
* This will mark the page as reserved
3) touch the page, which causes a page fault and allocates the page
* This will move the page out of the free list.
* It will also unreserved the page, since there is no more free
page
4) madvise(MADV_DONTNEED) the page
* This will free the page, but not mark it as reserved.
5) Allocate a secondary page with mmap(MAP_HUGETLB) into (void *ptr2).
* it should fail, but, since there is no more available page.
* But, since the page above is not reserved, this mmap() succeed.
6) Faulting at ptr1 will cause a SIGBUS
* it will try to allocate a huge page, but there is none
available
A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/
Fix this by restoring the reserved page if necessary.
These are the condition for the page restore:
* The system is not using surplus pages. The goal is to reduce the
surplus usage for this case.
* If the VMA has the HPAGE_RESV_OWNER flag set, and is PRIVATE. This is
safely checked using __vma_private_lock()
* The page is anonymous
Once this is scenario is found, set the `hugetlb_restore_reserve` bit in
the folio. Then check if the resv reservations need to be adjusted
later, done later, after the spinlock, since the vma_xxxx_reservation()
might touch the file system lock.
Link: https://lkml.kernel.org/r/20240205191843.4009640-1-leitao@debian.org
Link: https://lkml.kernel.org/r/20240205191843.4009640-2-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-05 19:18:41 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Adjust the reservation for the region that will have the
|
|
|
|
* reserve restored. Keep in mind that vma_needs_reservation() changes
|
|
|
|
* resv->adds_in_progress if it succeeds. If this is not done,
|
|
|
|
* do_exit() will not see it, and will keep the reservation
|
|
|
|
* forever.
|
|
|
|
*/
|
2024-05-28 20:53:23 +00:00
|
|
|
if (adjust_reservation) {
|
|
|
|
int rc = vma_needs_reservation(h, vma, address);
|
|
|
|
|
|
|
|
if (rc < 0)
|
|
|
|
/* Pressumably allocate_file_region_entries failed
|
|
|
|
* to allocate a file_region struct. Clear
|
|
|
|
* hugetlb_restore_reserve so that global reserve
|
|
|
|
* count will not be incremented by free_huge_folio.
|
|
|
|
* Act as if we consumed the reservation.
|
|
|
|
*/
|
|
|
|
folio_clear_hugetlb_restore_reserve(page_folio(page));
|
|
|
|
else if (rc)
|
|
|
|
vma_add_reservation(h, vma, address);
|
|
|
|
}
|
mm/hugetlb: restore the reservation if needed
Patch series "mm/hugetlb: Restore the reservation", v2.
This is a fix for a case where a backing huge page could stolen after
madvise(MADV_DONTNEED).
A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/
In order to test this patch, I instrumented the kernel with LOCKDEP and
KASAN, and run the following tests, without any regression:
* The self test that reproduces the problem
* All mm hugetlb selftests
SUMMARY: PASS=9 SKIP=0 FAIL=0
* All libhugetlbfs tests
PASS: 0 86
FAIL: 0 0
This patch (of 2):
Currently there is a bug that a huge page could be stolen, and when the
original owner tries to fault in it, it causes a page fault.
You can achieve that by:
1) Creating a single page
echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
2) mmap() the page above with MAP_HUGETLB into (void *ptr1).
* This will mark the page as reserved
3) touch the page, which causes a page fault and allocates the page
* This will move the page out of the free list.
* It will also unreserved the page, since there is no more free
page
4) madvise(MADV_DONTNEED) the page
* This will free the page, but not mark it as reserved.
5) Allocate a secondary page with mmap(MAP_HUGETLB) into (void *ptr2).
* it should fail, but, since there is no more available page.
* But, since the page above is not reserved, this mmap() succeed.
6) Faulting at ptr1 will cause a SIGBUS
* it will try to allocate a huge page, but there is none
available
A full reproducer is in selftest. See
https://lore.kernel.org/all/20240105155419.1939484-1-leitao@debian.org/
Fix this by restoring the reserved page if necessary.
These are the condition for the page restore:
* The system is not using surplus pages. The goal is to reduce the
surplus usage for this case.
* If the VMA has the HPAGE_RESV_OWNER flag set, and is PRIVATE. This is
safely checked using __vma_private_lock()
* The page is anonymous
Once this is scenario is found, set the `hugetlb_restore_reserve` bit in
the folio. Then check if the resv reservations need to be adjusted
later, done later, after the spinlock, since the vma_xxxx_reservation()
might touch the file system lock.
Link: https://lkml.kernel.org/r/20240205191843.4009640-1-leitao@debian.org
Link: https://lkml.kernel.org/r/20240205191843.4009640-2-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-05 19:18:41 +00:00
|
|
|
|
2016-07-26 22:24:12 +00:00
|
|
|
tlb_remove_page_size(tlb, page, huge_page_size(h));
|
2016-07-26 22:24:06 +00:00
|
|
|
/*
|
|
|
|
* Bail out after unmapping reference page if supplied
|
|
|
|
*/
|
|
|
|
if (ref_page)
|
|
|
|
break;
|
2006-10-04 09:15:24 +00:00
|
|
|
}
|
2012-07-31 23:42:03 +00:00
|
|
|
tlb_end_vma(tlb, vma);
|
2021-11-21 20:40:07 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If we unshared PMDs, the TLB flush was not recorded in mmu_gather. We
|
|
|
|
* could defer the flush until now, since by holding i_mmap_rwsem we
|
|
|
|
* guaranteed that the last refernece would not be dropped. But we must
|
|
|
|
* do the flushing before we return, as otherwise i_mmap_rwsem will be
|
|
|
|
* dropped and the last reference to the shared PMDs page might be
|
|
|
|
* dropped as well.
|
|
|
|
*
|
|
|
|
* In theory we could defer the freeing of the PMD pages as well, but
|
|
|
|
* huge_pmd_unshare() relies on the exact page_count for the PMD page to
|
|
|
|
* detect sharing, so we cannot defer the release of the page either.
|
|
|
|
* Instead, do flush now.
|
|
|
|
*/
|
|
|
|
if (force_flush)
|
|
|
|
tlb_flush_mmu_tlbonly(tlb);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2005-06-22 00:14:44 +00:00
|
|
|
|
2023-10-06 03:59:08 +00:00
|
|
|
void __hugetlb_zap_begin(struct vm_area_struct *vma,
|
|
|
|
unsigned long *start, unsigned long *end)
|
mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
If a process creates a large hugetlbfs mapping that is eligible for page
table sharing and forks heavily with children some of whom fault and
others which destroy the mapping then it is possible for page tables to
get corrupted. Some teardowns of the mapping encounter a "bad pmd" and
output a message to the kernel log. The final teardown will trigger a
BUG_ON in mm/filemap.c.
This was reproduced in 3.4 but is known to have existed for a long time
and goes back at least as far as 2.6.37. It was probably was introduced
in 2.6.20 by [39dde65c: shared page table for hugetlb page]. The messages
look like this;
[ ..........] Lots of bad pmd messages followed by this
[ 127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7).
[ 127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7).
[ 127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7).
[ 127.186778] ------------[ cut here ]------------
[ 127.186781] kernel BUG at mm/filemap.c:134!
[ 127.186782] invalid opcode: 0000 [#1] SMP
[ 127.186783] CPU 7
[ 127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod
[ 127.186801]
[ 127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR
[ 127.186804] RIP: 0010:[<ffffffff810ed6ce>] [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186809] RSP: 0000:ffff8804144b5c08 EFLAGS: 00010002
[ 127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0
[ 127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00
[ 127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003
[ 127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8
[ 127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8
[ 127.186815] FS: 00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000
[ 127.186816] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0
[ 127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0)
[ 127.186821] Stack:
[ 127.186822] ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b
[ 127.186824] ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98
[ 127.186825] ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000
[ 127.186827] Call Trace:
[ 127.186829] [<ffffffff810ed83b>] delete_from_page_cache+0x3b/0x80
[ 127.186832] [<ffffffff811bc925>] truncate_hugepages+0x115/0x220
[ 127.186834] [<ffffffff811bca43>] hugetlbfs_evict_inode+0x13/0x30
[ 127.186837] [<ffffffff811655c7>] evict+0xa7/0x1b0
[ 127.186839] [<ffffffff811657a3>] iput_final+0xd3/0x1f0
[ 127.186840] [<ffffffff811658f9>] iput+0x39/0x50
[ 127.186842] [<ffffffff81162708>] d_kill+0xf8/0x130
[ 127.186843] [<ffffffff81162812>] dput+0xd2/0x1a0
[ 127.186845] [<ffffffff8114e2d0>] __fput+0x170/0x230
[ 127.186848] [<ffffffff81236e0e>] ? rb_erase+0xce/0x150
[ 127.186849] [<ffffffff8114e3ad>] fput+0x1d/0x30
[ 127.186851] [<ffffffff81117db7>] remove_vma+0x37/0x80
[ 127.186853] [<ffffffff81119182>] do_munmap+0x2d2/0x360
[ 127.186855] [<ffffffff811cc639>] sys_shmdt+0xc9/0x170
[ 127.186857] [<ffffffff81410a39>] system_call_fastpath+0x16/0x1b
[ 127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0
[ 127.186868] RIP [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186870] RSP <ffff8804144b5c08>
[ 127.186871] ---[ end trace 7cbac5d1db69f426 ]---
The bug is a race and not always easy to reproduce. To reproduce it I was
doing the following on a single socket I7-based machine with 16G of RAM.
$ hugeadm --pool-pages-max DEFAULT:13G
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall
$ for i in `seq 1 9000`; do ./hugetlbfs-test; done
On my particular machine, it usually triggers within 10 minutes but
enabling debug options can change the timing such that it never hits.
Once the bug is triggered, the machine is in trouble and needs to be
rebooted. The machine will respond but processes accessing proc like "ps
aux" will hang due to the BUG_ON. shutdown will also hang and needs a
hard reset or a sysrq-b.
The basic problem is a race between page table sharing and teardown. For
the most part page table sharing depends on i_mmap_mutex. In some cases,
it is also taking the mm->page_table_lock for the PTE updates but with
shared page tables, it is the i_mmap_mutex that is more important.
Unfortunately it appears to be also insufficient. Consider the following
situation
Process A Process B
--------- ---------
hugetlb_fault shmdt
LockWrite(mmap_sem)
do_munmap
unmap_region
unmap_vmas
unmap_single_vma
unmap_hugepage_range
Lock(i_mmap_mutex)
Lock(mm->page_table_lock)
huge_pmd_unshare/unmap tables <--- (1)
Unlock(mm->page_table_lock)
Unlock(i_mmap_mutex)
huge_pte_alloc ...
Lock(i_mmap_mutex) ...
vma_prio_walk, find svma, spte ...
Lock(mm->page_table_lock) ...
share spte ...
Unlock(mm->page_table_lock) ...
Unlock(i_mmap_mutex) ...
hugetlb_no_page <--- (2)
free_pgtables
unlink_file_vma
hugetlb_free_pgd_range
remove_vma_list
In this scenario, it is possible for Process A to share page tables with
Process B that is trying to tear them down. The i_mmap_mutex on its own
does not prevent Process A walking Process B's page tables. At (1) above,
the page tables are not shared yet so it unmaps the PMDs. Process A sets
up page table sharing and at (2) faults a new entry. Process B then trips
up on it in free_pgtables.
This patch fixes the problem by adding a new function
__unmap_hugepage_range_final that is only called when the VMA is about to
be destroyed. This function clears VM_MAYSHARE during
unmap_hugepage_range() under the i_mmap_mutex. This makes the VMA
ineligible for sharing and avoids the race. Superficially this looks like
it would then be vunerable to truncate and madvise issues but hugetlbfs
has its own truncate handlers so does not use unmap_mapping_range() and
does not support madvise(DONTNEED).
This should be treated as a -stable candidate if it is merged.
Test program is as follows. The test case was mostly written by Michal
Hocko with a few minor changes to reproduce this bug.
==== CUT HERE ====
static size_t huge_page_size = (2UL << 20);
static size_t nr_huge_page_A = 512;
static size_t nr_huge_page_B = 5632;
unsigned int get_random(unsigned int max)
{
struct timeval tv;
gettimeofday(&tv, NULL);
srandom(tv.tv_usec);
return random() % max;
}
static void play(void *addr, size_t size)
{
unsigned char *start = addr,
*end = start + size,
*a;
start += get_random(size/2);
/* we could itterate on huge pages but let's give it more time. */
for (a = start; a < end; a += 4096)
*a = 0;
}
int main(int argc, char **argv)
{
key_t key = IPC_PRIVATE;
size_t sizeA = nr_huge_page_A * huge_page_size;
size_t sizeB = nr_huge_page_B * huge_page_size;
int shmidA, shmidB;
void *addrA = NULL, *addrB = NULL;
int nr_children = 300, n = 0;
if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
fork_child:
switch(fork()) {
case 0:
switch (n%3) {
case 0:
play(addrA, sizeA);
break;
case 1:
play(addrB, sizeB);
break;
case 2:
break;
}
break;
case -1:
perror("fork:");
break;
default:
if (++n < nr_children)
goto fork_child;
play(addrA, sizeA);
break;
}
shmdt(addrA);
shmdt(addrB);
do {
wait(NULL);
} while (--n > 0);
shmctl(shmidA, IPC_RMID, NULL);
shmctl(shmidB, IPC_RMID, NULL);
return 0;
}
[akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:46:20 +00:00
|
|
|
{
|
2023-10-06 03:59:08 +00:00
|
|
|
if (!vma->vm_file) /* hugetlbfs_file_mmap error */
|
|
|
|
return;
|
|
|
|
|
|
|
|
adjust_range_if_pmd_sharing_possible(vma, start, end);
|
hugetlb: fix vma lock handling during split vma and range unmapping
Patch series "hugetlb: fixes for new vma lock series".
In review of the series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", Miaohe Lin pointed out two key issues:
1) There is a race in the routine hugetlb_unmap_file_folio when locks
are dropped and reacquired in the correct order [1].
2) With the switch to using vma lock for fault/truncate synchronization,
we need to make sure lock exists for all VM_MAYSHARE vmas, not just
vmas capable of pmd sharing.
These two issues are addressed here. In addition, having a vma lock
present in all VM_MAYSHARE vmas, uncovered some issues around vma
splitting. Those are also addressed.
[1] https://lore.kernel.org/linux-mm/01f10195-7088-4462-6def-909549c75ef4@huawei.com/
This patch (of 3):
The hugetlb vma lock hangs off the vm_private_data field and is specific
to the vma. When vm_area_dup() is called as part of vma splitting, the
vma lock pointer is copied to the new vma. This will result in issues
such as double freeing of the structure. Update the hugetlb open vm_ops
to allocate a new vma lock for the new vma.
The routine __unmap_hugepage_range_final unconditionally unset VM_MAYSHARE
to prevent subsequent pmd sharing. hugetlb_vma_lock_free attempted to
anticipate this by checking both VM_MAYSHARE and VM_SHARED. However, if
only VM_MAYSHARE was set we would miss the free. With the introduction of
the vma lock, a vma can not participate in pmd sharing if vm_private_data
is NULL. Instead of clearing VM_MAYSHARE in __unmap_hugepage_range_final,
free the vma lock to prevent sharing. Also, update the sharing code to
make sure vma lock is indeed a condition for pmd sharing.
hugetlb_vma_lock_free can then key off VM_MAYSHARE and not miss any vmas.
Link: https://lkml.kernel.org/r/20221005011707.514612-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20221005011707.514612-2-mike.kravetz@oracle.com
Fixes: "hugetlb: add vma based lock for pmd sharing"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-05 01:17:05 +00:00
|
|
|
hugetlb_vma_lock_write(vma);
|
2023-10-06 03:59:08 +00:00
|
|
|
if (vma->vm_file)
|
|
|
|
i_mmap_lock_write(vma->vm_file->f_mapping);
|
|
|
|
}
|
hugetlb: fix vma lock handling during split vma and range unmapping
Patch series "hugetlb: fixes for new vma lock series".
In review of the series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", Miaohe Lin pointed out two key issues:
1) There is a race in the routine hugetlb_unmap_file_folio when locks
are dropped and reacquired in the correct order [1].
2) With the switch to using vma lock for fault/truncate synchronization,
we need to make sure lock exists for all VM_MAYSHARE vmas, not just
vmas capable of pmd sharing.
These two issues are addressed here. In addition, having a vma lock
present in all VM_MAYSHARE vmas, uncovered some issues around vma
splitting. Those are also addressed.
[1] https://lore.kernel.org/linux-mm/01f10195-7088-4462-6def-909549c75ef4@huawei.com/
This patch (of 3):
The hugetlb vma lock hangs off the vm_private_data field and is specific
to the vma. When vm_area_dup() is called as part of vma splitting, the
vma lock pointer is copied to the new vma. This will result in issues
such as double freeing of the structure. Update the hugetlb open vm_ops
to allocate a new vma lock for the new vma.
The routine __unmap_hugepage_range_final unconditionally unset VM_MAYSHARE
to prevent subsequent pmd sharing. hugetlb_vma_lock_free attempted to
anticipate this by checking both VM_MAYSHARE and VM_SHARED. However, if
only VM_MAYSHARE was set we would miss the free. With the introduction of
the vma lock, a vma can not participate in pmd sharing if vm_private_data
is NULL. Instead of clearing VM_MAYSHARE in __unmap_hugepage_range_final,
free the vma lock to prevent sharing. Also, update the sharing code to
make sure vma lock is indeed a condition for pmd sharing.
hugetlb_vma_lock_free can then key off VM_MAYSHARE and not miss any vmas.
Link: https://lkml.kernel.org/r/20221005011707.514612-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20221005011707.514612-2-mike.kravetz@oracle.com
Fixes: "hugetlb: add vma based lock for pmd sharing"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-05 01:17:05 +00:00
|
|
|
|
2023-10-06 03:59:08 +00:00
|
|
|
void __hugetlb_zap_end(struct vm_area_struct *vma,
|
|
|
|
struct zap_details *details)
|
|
|
|
{
|
|
|
|
zap_flags_t zap_flags = details ? details->zap_flags : 0;
|
hugetlb: fix vma lock handling during split vma and range unmapping
Patch series "hugetlb: fixes for new vma lock series".
In review of the series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", Miaohe Lin pointed out two key issues:
1) There is a race in the routine hugetlb_unmap_file_folio when locks
are dropped and reacquired in the correct order [1].
2) With the switch to using vma lock for fault/truncate synchronization,
we need to make sure lock exists for all VM_MAYSHARE vmas, not just
vmas capable of pmd sharing.
These two issues are addressed here. In addition, having a vma lock
present in all VM_MAYSHARE vmas, uncovered some issues around vma
splitting. Those are also addressed.
[1] https://lore.kernel.org/linux-mm/01f10195-7088-4462-6def-909549c75ef4@huawei.com/
This patch (of 3):
The hugetlb vma lock hangs off the vm_private_data field and is specific
to the vma. When vm_area_dup() is called as part of vma splitting, the
vma lock pointer is copied to the new vma. This will result in issues
such as double freeing of the structure. Update the hugetlb open vm_ops
to allocate a new vma lock for the new vma.
The routine __unmap_hugepage_range_final unconditionally unset VM_MAYSHARE
to prevent subsequent pmd sharing. hugetlb_vma_lock_free attempted to
anticipate this by checking both VM_MAYSHARE and VM_SHARED. However, if
only VM_MAYSHARE was set we would miss the free. With the introduction of
the vma lock, a vma can not participate in pmd sharing if vm_private_data
is NULL. Instead of clearing VM_MAYSHARE in __unmap_hugepage_range_final,
free the vma lock to prevent sharing. Also, update the sharing code to
make sure vma lock is indeed a condition for pmd sharing.
hugetlb_vma_lock_free can then key off VM_MAYSHARE and not miss any vmas.
Link: https://lkml.kernel.org/r/20221005011707.514612-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20221005011707.514612-2-mike.kravetz@oracle.com
Fixes: "hugetlb: add vma based lock for pmd sharing"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-05 01:17:05 +00:00
|
|
|
|
2023-10-06 03:59:08 +00:00
|
|
|
if (!vma->vm_file) /* hugetlbfs_file_mmap error */
|
|
|
|
return;
|
mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
If a process creates a large hugetlbfs mapping that is eligible for page
table sharing and forks heavily with children some of whom fault and
others which destroy the mapping then it is possible for page tables to
get corrupted. Some teardowns of the mapping encounter a "bad pmd" and
output a message to the kernel log. The final teardown will trigger a
BUG_ON in mm/filemap.c.
This was reproduced in 3.4 but is known to have existed for a long time
and goes back at least as far as 2.6.37. It was probably was introduced
in 2.6.20 by [39dde65c: shared page table for hugetlb page]. The messages
look like this;
[ ..........] Lots of bad pmd messages followed by this
[ 127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7).
[ 127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7).
[ 127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7).
[ 127.186778] ------------[ cut here ]------------
[ 127.186781] kernel BUG at mm/filemap.c:134!
[ 127.186782] invalid opcode: 0000 [#1] SMP
[ 127.186783] CPU 7
[ 127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod
[ 127.186801]
[ 127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR
[ 127.186804] RIP: 0010:[<ffffffff810ed6ce>] [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186809] RSP: 0000:ffff8804144b5c08 EFLAGS: 00010002
[ 127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0
[ 127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00
[ 127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003
[ 127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8
[ 127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8
[ 127.186815] FS: 00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000
[ 127.186816] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0
[ 127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0)
[ 127.186821] Stack:
[ 127.186822] ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b
[ 127.186824] ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98
[ 127.186825] ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000
[ 127.186827] Call Trace:
[ 127.186829] [<ffffffff810ed83b>] delete_from_page_cache+0x3b/0x80
[ 127.186832] [<ffffffff811bc925>] truncate_hugepages+0x115/0x220
[ 127.186834] [<ffffffff811bca43>] hugetlbfs_evict_inode+0x13/0x30
[ 127.186837] [<ffffffff811655c7>] evict+0xa7/0x1b0
[ 127.186839] [<ffffffff811657a3>] iput_final+0xd3/0x1f0
[ 127.186840] [<ffffffff811658f9>] iput+0x39/0x50
[ 127.186842] [<ffffffff81162708>] d_kill+0xf8/0x130
[ 127.186843] [<ffffffff81162812>] dput+0xd2/0x1a0
[ 127.186845] [<ffffffff8114e2d0>] __fput+0x170/0x230
[ 127.186848] [<ffffffff81236e0e>] ? rb_erase+0xce/0x150
[ 127.186849] [<ffffffff8114e3ad>] fput+0x1d/0x30
[ 127.186851] [<ffffffff81117db7>] remove_vma+0x37/0x80
[ 127.186853] [<ffffffff81119182>] do_munmap+0x2d2/0x360
[ 127.186855] [<ffffffff811cc639>] sys_shmdt+0xc9/0x170
[ 127.186857] [<ffffffff81410a39>] system_call_fastpath+0x16/0x1b
[ 127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0
[ 127.186868] RIP [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186870] RSP <ffff8804144b5c08>
[ 127.186871] ---[ end trace 7cbac5d1db69f426 ]---
The bug is a race and not always easy to reproduce. To reproduce it I was
doing the following on a single socket I7-based machine with 16G of RAM.
$ hugeadm --pool-pages-max DEFAULT:13G
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall
$ for i in `seq 1 9000`; do ./hugetlbfs-test; done
On my particular machine, it usually triggers within 10 minutes but
enabling debug options can change the timing such that it never hits.
Once the bug is triggered, the machine is in trouble and needs to be
rebooted. The machine will respond but processes accessing proc like "ps
aux" will hang due to the BUG_ON. shutdown will also hang and needs a
hard reset or a sysrq-b.
The basic problem is a race between page table sharing and teardown. For
the most part page table sharing depends on i_mmap_mutex. In some cases,
it is also taking the mm->page_table_lock for the PTE updates but with
shared page tables, it is the i_mmap_mutex that is more important.
Unfortunately it appears to be also insufficient. Consider the following
situation
Process A Process B
--------- ---------
hugetlb_fault shmdt
LockWrite(mmap_sem)
do_munmap
unmap_region
unmap_vmas
unmap_single_vma
unmap_hugepage_range
Lock(i_mmap_mutex)
Lock(mm->page_table_lock)
huge_pmd_unshare/unmap tables <--- (1)
Unlock(mm->page_table_lock)
Unlock(i_mmap_mutex)
huge_pte_alloc ...
Lock(i_mmap_mutex) ...
vma_prio_walk, find svma, spte ...
Lock(mm->page_table_lock) ...
share spte ...
Unlock(mm->page_table_lock) ...
Unlock(i_mmap_mutex) ...
hugetlb_no_page <--- (2)
free_pgtables
unlink_file_vma
hugetlb_free_pgd_range
remove_vma_list
In this scenario, it is possible for Process A to share page tables with
Process B that is trying to tear them down. The i_mmap_mutex on its own
does not prevent Process A walking Process B's page tables. At (1) above,
the page tables are not shared yet so it unmaps the PMDs. Process A sets
up page table sharing and at (2) faults a new entry. Process B then trips
up on it in free_pgtables.
This patch fixes the problem by adding a new function
__unmap_hugepage_range_final that is only called when the VMA is about to
be destroyed. This function clears VM_MAYSHARE during
unmap_hugepage_range() under the i_mmap_mutex. This makes the VMA
ineligible for sharing and avoids the race. Superficially this looks like
it would then be vunerable to truncate and madvise issues but hugetlbfs
has its own truncate handlers so does not use unmap_mapping_range() and
does not support madvise(DONTNEED).
This should be treated as a -stable candidate if it is merged.
Test program is as follows. The test case was mostly written by Michal
Hocko with a few minor changes to reproduce this bug.
==== CUT HERE ====
static size_t huge_page_size = (2UL << 20);
static size_t nr_huge_page_A = 512;
static size_t nr_huge_page_B = 5632;
unsigned int get_random(unsigned int max)
{
struct timeval tv;
gettimeofday(&tv, NULL);
srandom(tv.tv_usec);
return random() % max;
}
static void play(void *addr, size_t size)
{
unsigned char *start = addr,
*end = start + size,
*a;
start += get_random(size/2);
/* we could itterate on huge pages but let's give it more time. */
for (a = start; a < end; a += 4096)
*a = 0;
}
int main(int argc, char **argv)
{
key_t key = IPC_PRIVATE;
size_t sizeA = nr_huge_page_A * huge_page_size;
size_t sizeB = nr_huge_page_B * huge_page_size;
int shmidA, shmidB;
void *addrA = NULL, *addrB = NULL;
int nr_children = 300, n = 0;
if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
fork_child:
switch(fork()) {
case 0:
switch (n%3) {
case 0:
play(addrA, sizeA);
break;
case 1:
play(addrB, sizeB);
break;
case 2:
break;
}
break;
case -1:
perror("fork:");
break;
default:
if (++n < nr_children)
goto fork_child;
play(addrA, sizeA);
break;
}
shmdt(addrA);
shmdt(addrB);
do {
wait(NULL);
} while (--n > 0);
shmctl(shmidA, IPC_RMID, NULL);
shmctl(shmidB, IPC_RMID, NULL);
return 0;
}
[akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:46:20 +00:00
|
|
|
|
2022-11-14 23:55:06 +00:00
|
|
|
if (zap_flags & ZAP_FLAG_UNMAP) { /* final unmap */
|
|
|
|
/*
|
|
|
|
* Unlock and free the vma lock before releasing i_mmap_rwsem.
|
|
|
|
* When the vma_lock is freed, this makes the vma ineligible
|
|
|
|
* for pmd sharing. And, i_mmap_rwsem is required to set up
|
|
|
|
* pmd sharing. This is important as page tables for this
|
|
|
|
* unmapped range will be asynchrously deleted. If the page
|
|
|
|
* tables are shared, there will be issues when accessed by
|
|
|
|
* someone else.
|
|
|
|
*/
|
|
|
|
__hugetlb_vma_unlock_write_free(vma);
|
|
|
|
} else {
|
|
|
|
hugetlb_vma_unlock_write(vma);
|
|
|
|
}
|
2023-10-06 03:59:08 +00:00
|
|
|
|
|
|
|
if (vma->vm_file)
|
|
|
|
i_mmap_unlock_write(vma->vm_file->f_mapping);
|
mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
If a process creates a large hugetlbfs mapping that is eligible for page
table sharing and forks heavily with children some of whom fault and
others which destroy the mapping then it is possible for page tables to
get corrupted. Some teardowns of the mapping encounter a "bad pmd" and
output a message to the kernel log. The final teardown will trigger a
BUG_ON in mm/filemap.c.
This was reproduced in 3.4 but is known to have existed for a long time
and goes back at least as far as 2.6.37. It was probably was introduced
in 2.6.20 by [39dde65c: shared page table for hugetlb page]. The messages
look like this;
[ ..........] Lots of bad pmd messages followed by this
[ 127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7).
[ 127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7).
[ 127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7).
[ 127.186778] ------------[ cut here ]------------
[ 127.186781] kernel BUG at mm/filemap.c:134!
[ 127.186782] invalid opcode: 0000 [#1] SMP
[ 127.186783] CPU 7
[ 127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod
[ 127.186801]
[ 127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR
[ 127.186804] RIP: 0010:[<ffffffff810ed6ce>] [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186809] RSP: 0000:ffff8804144b5c08 EFLAGS: 00010002
[ 127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0
[ 127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00
[ 127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003
[ 127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8
[ 127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8
[ 127.186815] FS: 00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000
[ 127.186816] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0
[ 127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0)
[ 127.186821] Stack:
[ 127.186822] ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b
[ 127.186824] ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98
[ 127.186825] ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000
[ 127.186827] Call Trace:
[ 127.186829] [<ffffffff810ed83b>] delete_from_page_cache+0x3b/0x80
[ 127.186832] [<ffffffff811bc925>] truncate_hugepages+0x115/0x220
[ 127.186834] [<ffffffff811bca43>] hugetlbfs_evict_inode+0x13/0x30
[ 127.186837] [<ffffffff811655c7>] evict+0xa7/0x1b0
[ 127.186839] [<ffffffff811657a3>] iput_final+0xd3/0x1f0
[ 127.186840] [<ffffffff811658f9>] iput+0x39/0x50
[ 127.186842] [<ffffffff81162708>] d_kill+0xf8/0x130
[ 127.186843] [<ffffffff81162812>] dput+0xd2/0x1a0
[ 127.186845] [<ffffffff8114e2d0>] __fput+0x170/0x230
[ 127.186848] [<ffffffff81236e0e>] ? rb_erase+0xce/0x150
[ 127.186849] [<ffffffff8114e3ad>] fput+0x1d/0x30
[ 127.186851] [<ffffffff81117db7>] remove_vma+0x37/0x80
[ 127.186853] [<ffffffff81119182>] do_munmap+0x2d2/0x360
[ 127.186855] [<ffffffff811cc639>] sys_shmdt+0xc9/0x170
[ 127.186857] [<ffffffff81410a39>] system_call_fastpath+0x16/0x1b
[ 127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0
[ 127.186868] RIP [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186870] RSP <ffff8804144b5c08>
[ 127.186871] ---[ end trace 7cbac5d1db69f426 ]---
The bug is a race and not always easy to reproduce. To reproduce it I was
doing the following on a single socket I7-based machine with 16G of RAM.
$ hugeadm --pool-pages-max DEFAULT:13G
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall
$ for i in `seq 1 9000`; do ./hugetlbfs-test; done
On my particular machine, it usually triggers within 10 minutes but
enabling debug options can change the timing such that it never hits.
Once the bug is triggered, the machine is in trouble and needs to be
rebooted. The machine will respond but processes accessing proc like "ps
aux" will hang due to the BUG_ON. shutdown will also hang and needs a
hard reset or a sysrq-b.
The basic problem is a race between page table sharing and teardown. For
the most part page table sharing depends on i_mmap_mutex. In some cases,
it is also taking the mm->page_table_lock for the PTE updates but with
shared page tables, it is the i_mmap_mutex that is more important.
Unfortunately it appears to be also insufficient. Consider the following
situation
Process A Process B
--------- ---------
hugetlb_fault shmdt
LockWrite(mmap_sem)
do_munmap
unmap_region
unmap_vmas
unmap_single_vma
unmap_hugepage_range
Lock(i_mmap_mutex)
Lock(mm->page_table_lock)
huge_pmd_unshare/unmap tables <--- (1)
Unlock(mm->page_table_lock)
Unlock(i_mmap_mutex)
huge_pte_alloc ...
Lock(i_mmap_mutex) ...
vma_prio_walk, find svma, spte ...
Lock(mm->page_table_lock) ...
share spte ...
Unlock(mm->page_table_lock) ...
Unlock(i_mmap_mutex) ...
hugetlb_no_page <--- (2)
free_pgtables
unlink_file_vma
hugetlb_free_pgd_range
remove_vma_list
In this scenario, it is possible for Process A to share page tables with
Process B that is trying to tear them down. The i_mmap_mutex on its own
does not prevent Process A walking Process B's page tables. At (1) above,
the page tables are not shared yet so it unmaps the PMDs. Process A sets
up page table sharing and at (2) faults a new entry. Process B then trips
up on it in free_pgtables.
This patch fixes the problem by adding a new function
__unmap_hugepage_range_final that is only called when the VMA is about to
be destroyed. This function clears VM_MAYSHARE during
unmap_hugepage_range() under the i_mmap_mutex. This makes the VMA
ineligible for sharing and avoids the race. Superficially this looks like
it would then be vunerable to truncate and madvise issues but hugetlbfs
has its own truncate handlers so does not use unmap_mapping_range() and
does not support madvise(DONTNEED).
This should be treated as a -stable candidate if it is merged.
Test program is as follows. The test case was mostly written by Michal
Hocko with a few minor changes to reproduce this bug.
==== CUT HERE ====
static size_t huge_page_size = (2UL << 20);
static size_t nr_huge_page_A = 512;
static size_t nr_huge_page_B = 5632;
unsigned int get_random(unsigned int max)
{
struct timeval tv;
gettimeofday(&tv, NULL);
srandom(tv.tv_usec);
return random() % max;
}
static void play(void *addr, size_t size)
{
unsigned char *start = addr,
*end = start + size,
*a;
start += get_random(size/2);
/* we could itterate on huge pages but let's give it more time. */
for (a = start; a < end; a += 4096)
*a = 0;
}
int main(int argc, char **argv)
{
key_t key = IPC_PRIVATE;
size_t sizeA = nr_huge_page_A * huge_page_size;
size_t sizeB = nr_huge_page_B * huge_page_size;
int shmidA, shmidB;
void *addrA = NULL, *addrB = NULL;
int nr_children = 300, n = 0;
if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
fork_child:
switch(fork()) {
case 0:
switch (n%3) {
case 0:
play(addrA, sizeA);
break;
case 1:
play(addrB, sizeB);
break;
case 2:
break;
}
break;
case -1:
perror("fork:");
break;
default:
if (++n < nr_children)
goto fork_child;
play(addrA, sizeA);
break;
}
shmdt(addrA);
shmdt(addrB);
do {
wait(NULL);
} while (--n > 0);
shmctl(shmidA, IPC_RMID, NULL);
shmctl(shmidB, IPC_RMID, NULL);
return 0;
}
[akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:46:20 +00:00
|
|
|
}
|
|
|
|
|
2006-10-11 08:20:46 +00:00
|
|
|
void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
|
2022-05-13 03:22:55 +00:00
|
|
|
unsigned long end, struct page *ref_page,
|
|
|
|
zap_flags_t zap_flags)
|
2006-10-11 08:20:46 +00:00
|
|
|
{
|
2022-11-14 23:55:07 +00:00
|
|
|
struct mmu_notifier_range range;
|
2012-07-31 23:42:03 +00:00
|
|
|
struct mmu_gather tlb;
|
2018-10-05 22:51:33 +00:00
|
|
|
|
2023-01-10 02:57:22 +00:00
|
|
|
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, vma->vm_mm,
|
2022-11-14 23:55:07 +00:00
|
|
|
start, end);
|
|
|
|
adjust_range_if_pmd_sharing_possible(vma, &range.start, &range.end);
|
|
|
|
mmu_notifier_invalidate_range_start(&range);
|
2021-01-27 23:53:45 +00:00
|
|
|
tlb_gather_mmu(&tlb, vma->vm_mm);
|
2022-11-14 23:55:07 +00:00
|
|
|
|
2022-05-13 03:22:55 +00:00
|
|
|
__unmap_hugepage_range(&tlb, vma, start, end, ref_page, zap_flags);
|
2022-11-14 23:55:07 +00:00
|
|
|
|
|
|
|
mmu_notifier_invalidate_range_end(&range);
|
2021-01-27 23:53:43 +00:00
|
|
|
tlb_finish_mmu(&tlb);
|
2006-10-11 08:20:46 +00:00
|
|
|
}
|
|
|
|
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
/*
|
|
|
|
* This is called when the original mapper is failing to COW a MAP_PRIVATE
|
2021-02-24 20:07:26 +00:00
|
|
|
* mapping it owns the reserve page for. The intention is to unmap the page
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
* from other VMAs and let the children be SIGKILLed if they are faulting the
|
|
|
|
* same region.
|
|
|
|
*/
|
2014-08-06 23:06:45 +00:00
|
|
|
static void unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma,
|
|
|
|
struct page *page, unsigned long address)
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
{
|
2008-11-12 21:24:56 +00:00
|
|
|
struct hstate *h = hstate_vma(vma);
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
struct vm_area_struct *iter_vma;
|
|
|
|
struct address_space *mapping;
|
|
|
|
pgoff_t pgoff;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* vm_pgoff is in PAGE_SIZE units, hence the different calculation
|
|
|
|
* from page cache lookup which is in HPAGE_SIZE units.
|
|
|
|
*/
|
2008-11-12 21:24:56 +00:00
|
|
|
address = address & huge_page_mask(h);
|
2012-10-08 23:33:31 +00:00
|
|
|
pgoff = ((address - vma->vm_start) >> PAGE_SHIFT) +
|
|
|
|
vma->vm_pgoff;
|
2015-12-05 04:45:44 +00:00
|
|
|
mapping = vma->vm_file->f_mapping;
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
|
2009-12-15 01:59:53 +00:00
|
|
|
/*
|
|
|
|
* Take the mapping lock for the duration of the table walk. As
|
|
|
|
* this mapping should be shared between all the VMAs,
|
|
|
|
* __unmap_hugepage_range() is called as the lock is already held
|
|
|
|
*/
|
2014-12-13 00:54:21 +00:00
|
|
|
i_mmap_lock_write(mapping);
|
2012-10-08 23:31:25 +00:00
|
|
|
vma_interval_tree_foreach(iter_vma, &mapping->i_mmap, pgoff, pgoff) {
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
/* Do not unmap the current VMA */
|
|
|
|
if (iter_vma == vma)
|
|
|
|
continue;
|
|
|
|
|
mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault
SunDong reported the following on
https://bugzilla.kernel.org/show_bug.cgi?id=103841
I think I find a linux bug, I have the test cases is constructed. I
can stable recurring problems in fedora22(4.0.4) kernel version,
arch for x86_64. I construct transparent huge page, when the parent
and child process with MAP_SHARE, MAP_PRIVATE way to access the same
huge page area, it has the opportunity to lead to huge page copy on
write failure, and then it will munmap the child corresponding mmap
area, but then the child mmap area with VM_MAYSHARE attributes, child
process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags
functions (vma - > vm_flags & VM_MAYSHARE).
There were a number of problems with the report (e.g. it's hugetlbfs that
triggers this, not transparent huge pages) but it was fundamentally
correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that
looks like this
vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000
next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800
prot 8000000000000027 anon_vma (null) vm_ops ffffffff8182a7a0
pgoff 0 file ffff88106bdb9800 private_data (null)
flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb)
------------
kernel BUG at mm/hugetlb.c:462!
SMP
Modules linked in: xt_pkttype xt_LOG xt_limit [..]
CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1
Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012
set_vma_resv_flags+0x2d/0x30
The VM_BUG_ON is correct because private and shared mappings have
different reservation accounting but the warning clearly shows that the
VMA is shared.
When a private COW fails to allocate a new page then only the process
that created the VMA gets the page -- all the children unmap the page.
If the children access that data in the future then they get killed.
The problem is that the same file is mapped shared and private. During
the COW, the allocation fails, the VMAs are traversed to unmap the other
private pages but a shared VMA is found and the bug is triggered. This
patch identifies such VMAs and skips them.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: SunDong <sund_sky@126.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-01 22:36:57 +00:00
|
|
|
/*
|
|
|
|
* Shared VMAs have their own reserves and do not affect
|
|
|
|
* MAP_PRIVATE accounting but it is possible that a shared
|
|
|
|
* VMA is using the same page so check and skip such VMAs.
|
|
|
|
*/
|
|
|
|
if (iter_vma->vm_flags & VM_MAYSHARE)
|
|
|
|
continue;
|
|
|
|
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
/*
|
|
|
|
* Unmap the page from other VMAs without their own reserves.
|
|
|
|
* They get marked to be SIGKILLed if they fault in these
|
|
|
|
* areas. This is because a future no-page fault on this VMA
|
|
|
|
* could insert a zeroed page instead of the data existing
|
|
|
|
* from the time of fork. This would look like data corruption
|
|
|
|
*/
|
|
|
|
if (!is_vma_resv_set(iter_vma, HPAGE_RESV_OWNER))
|
2012-07-31 23:42:03 +00:00
|
|
|
unmap_hugepage_range(iter_vma, address,
|
2022-05-13 03:22:55 +00:00
|
|
|
address + huge_page_size(h), page, 0);
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
}
|
2014-12-13 00:54:21 +00:00
|
|
|
i_mmap_unlock_write(mapping);
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
}
|
|
|
|
|
2010-05-28 00:29:16 +00:00
|
|
|
/*
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
* hugetlb_wp() should be called with page lock of the original hugepage held.
|
2021-11-05 20:41:55 +00:00
|
|
|
* Called with hugetlb_fault_mutex_table held and pte_page locked so we
|
2012-01-10 23:07:21 +00:00
|
|
|
* cannot race with other handlers or page migration.
|
|
|
|
* Keep the pte_same checks anyway to make transition from the mutex easier.
|
2010-05-28 00:29:16 +00:00
|
|
|
*/
|
2024-04-01 20:26:51 +00:00
|
|
|
static vm_fault_t hugetlb_wp(struct folio *pagecache_folio,
|
2024-02-21 23:47:31 +00:00
|
|
|
struct vm_fault *vmf)
|
2006-01-06 08:10:44 +00:00
|
|
|
{
|
2024-04-01 20:26:51 +00:00
|
|
|
struct vm_area_struct *vma = vmf->vma;
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
const bool unshare = vmf->flags & FAULT_FLAG_UNSHARE;
|
2024-07-02 13:51:20 +00:00
|
|
|
pte_t pte = huge_ptep_get(mm, vmf->address, vmf->pte);
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = hstate_vma(vma);
|
2023-06-06 06:20:12 +00:00
|
|
|
struct folio *old_folio;
|
2023-01-25 17:05:33 +00:00
|
|
|
struct folio *new_folio;
|
2018-08-24 00:01:36 +00:00
|
|
|
int outside_reserve = 0;
|
|
|
|
vm_fault_t ret = 0;
|
2018-12-28 08:38:09 +00:00
|
|
|
struct mmu_notifier_range range;
|
2006-01-06 08:10:44 +00:00
|
|
|
|
2023-03-21 19:18:40 +00:00
|
|
|
/*
|
|
|
|
* Never handle CoW for uffd-wp protected pages. It should be only
|
|
|
|
* handled when the uffd-wp protection is removed.
|
|
|
|
*
|
|
|
|
* Note that only the CoW optimization path (in hugetlb_no_page())
|
|
|
|
* can trigger this, because hugetlb_fault() will always resolve
|
|
|
|
* uffd-wp bit first.
|
|
|
|
*/
|
|
|
|
if (!unshare && huge_pte_uffd_wp(pte))
|
|
|
|
return 0;
|
|
|
|
|
mm/hugetlb: support write-faults in shared mappings
If we ever get a write-fault on a write-protected page in a shared
mapping, we'd be in trouble (again). Instead, we can simply map the page
writable.
And in fact, there is even a way right now to trigger that code via
uffd-wp ever since we stared to support it for shmem in 5.19:
--------------------------------------------------------------------------
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/ioctl.h>
#include <linux/userfaultfd.h>
#define HUGETLB_SIZE (2 * 1024 * 1024u)
static char *map;
int uffd;
static int temp_setup_uffd(void)
{
struct uffdio_api uffdio_api;
struct uffdio_register uffdio_register;
struct uffdio_writeprotect uffd_writeprotect;
struct uffdio_range uffd_range;
uffd = syscall(__NR_userfaultfd,
O_CLOEXEC | O_NONBLOCK | UFFD_USER_MODE_ONLY);
if (uffd < 0) {
fprintf(stderr, "syscall() failed: %d\n", errno);
return -errno;
}
uffdio_api.api = UFFD_API;
uffdio_api.features = UFFD_FEATURE_PAGEFAULT_FLAG_WP;
if (ioctl(uffd, UFFDIO_API, &uffdio_api) < 0) {
fprintf(stderr, "UFFDIO_API failed: %d\n", errno);
return -errno;
}
if (!(uffdio_api.features & UFFD_FEATURE_PAGEFAULT_FLAG_WP)) {
fprintf(stderr, "UFFD_FEATURE_WRITEPROTECT missing\n");
return -ENOSYS;
}
/* Register UFFD-WP */
uffdio_register.range.start = (unsigned long) map;
uffdio_register.range.len = HUGETLB_SIZE;
uffdio_register.mode = UFFDIO_REGISTER_MODE_WP;
if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register) < 0) {
fprintf(stderr, "UFFDIO_REGISTER failed: %d\n", errno);
return -errno;
}
/* Writeprotect a single page. */
uffd_writeprotect.range.start = (unsigned long) map;
uffd_writeprotect.range.len = HUGETLB_SIZE;
uffd_writeprotect.mode = UFFDIO_WRITEPROTECT_MODE_WP;
if (ioctl(uffd, UFFDIO_WRITEPROTECT, &uffd_writeprotect)) {
fprintf(stderr, "UFFDIO_WRITEPROTECT failed: %d\n", errno);
return -errno;
}
/* Unregister UFFD-WP without prior writeunprotection. */
uffd_range.start = (unsigned long) map;
uffd_range.len = HUGETLB_SIZE;
if (ioctl(uffd, UFFDIO_UNREGISTER, &uffd_range)) {
fprintf(stderr, "UFFDIO_UNREGISTER failed: %d\n", errno);
return -errno;
}
return 0;
}
int main(int argc, char **argv)
{
int fd;
fd = open("/dev/hugepages/tmp", O_RDWR | O_CREAT);
if (!fd) {
fprintf(stderr, "open() failed\n");
return -errno;
}
if (ftruncate(fd, HUGETLB_SIZE)) {
fprintf(stderr, "ftruncate() failed\n");
return -errno;
}
map = mmap(NULL, HUGETLB_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
if (map == MAP_FAILED) {
fprintf(stderr, "mmap() failed\n");
return -errno;
}
*map = 0;
if (temp_setup_uffd())
return 1;
*map = 0;
return 0;
}
--------------------------------------------------------------------------
Above test fails with SIGBUS when there is only a single free hugetlb page.
# echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# ./test
Bus error (core dumped)
And worse, with sufficient free hugetlb pages it will map an anonymous page
into a shared mapping, for example, messing up accounting during unmap
and breaking MAP_SHARED semantics:
# echo 2 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# ./test
# cat /proc/meminfo | grep HugePages_
HugePages_Total: 2
HugePages_Free: 1
HugePages_Rsvd: 18446744073709551615
HugePages_Surp: 0
Reason is that uffd-wp doesn't clear the uffd-wp PTE bit when
unregistering and consequently keeps the PTE writeprotected. Reason for
this is to avoid the additional overhead when unregistering. Note that
this is the case also for !hugetlb and that we will end up with writable
PTEs that still have the uffd-wp PTE bit set once we return from
hugetlb_wp(). I'm not touching the uffd-wp PTE bit for now, because it
seems to be a generic thing -- wp_page_reuse() also doesn't clear it.
VM_MAYSHARE handling in hugetlb_fault() for FAULT_FLAG_WRITE indicates
that MAP_SHARED handling was at least envisioned, but could never have
worked as expected.
While at it, make sure that we never end up in hugetlb_wp() on write
faults without VM_WRITE, because we don't support maybe_mkwrite()
semantics as commonly used in the !hugetlb case -- for example, in
wp_page_reuse().
Note that there is no need to do any kind of reservation in
hugetlb_fault() in this case ... because we already have a hugetlb page
mapped R/O that we will simply map writable and we are not dealing with
COW/unsharing.
Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com
Fixes: b1f9e876862d ("mm/uffd: enable write protection for shmem & hugetlbfs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org> [5.19]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 10:34:35 +00:00
|
|
|
/*
|
|
|
|
* hugetlb does not support FOLL_FORCE-style write faults that keep the
|
|
|
|
* PTE mapped R/O such as maybe_mkwrite() would do.
|
|
|
|
*/
|
|
|
|
if (WARN_ON_ONCE(!unshare && !(vma->vm_flags & VM_WRITE)))
|
|
|
|
return VM_FAULT_SIGSEGV;
|
|
|
|
|
|
|
|
/* Let's take out MAP_SHARED mappings first. */
|
|
|
|
if (vma->vm_flags & VM_MAYSHARE) {
|
2024-04-01 20:26:51 +00:00
|
|
|
set_huge_ptep_writable(vma, vmf->address, vmf->pte);
|
mm/hugetlb: support write-faults in shared mappings
If we ever get a write-fault on a write-protected page in a shared
mapping, we'd be in trouble (again). Instead, we can simply map the page
writable.
And in fact, there is even a way right now to trigger that code via
uffd-wp ever since we stared to support it for shmem in 5.19:
--------------------------------------------------------------------------
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/ioctl.h>
#include <linux/userfaultfd.h>
#define HUGETLB_SIZE (2 * 1024 * 1024u)
static char *map;
int uffd;
static int temp_setup_uffd(void)
{
struct uffdio_api uffdio_api;
struct uffdio_register uffdio_register;
struct uffdio_writeprotect uffd_writeprotect;
struct uffdio_range uffd_range;
uffd = syscall(__NR_userfaultfd,
O_CLOEXEC | O_NONBLOCK | UFFD_USER_MODE_ONLY);
if (uffd < 0) {
fprintf(stderr, "syscall() failed: %d\n", errno);
return -errno;
}
uffdio_api.api = UFFD_API;
uffdio_api.features = UFFD_FEATURE_PAGEFAULT_FLAG_WP;
if (ioctl(uffd, UFFDIO_API, &uffdio_api) < 0) {
fprintf(stderr, "UFFDIO_API failed: %d\n", errno);
return -errno;
}
if (!(uffdio_api.features & UFFD_FEATURE_PAGEFAULT_FLAG_WP)) {
fprintf(stderr, "UFFD_FEATURE_WRITEPROTECT missing\n");
return -ENOSYS;
}
/* Register UFFD-WP */
uffdio_register.range.start = (unsigned long) map;
uffdio_register.range.len = HUGETLB_SIZE;
uffdio_register.mode = UFFDIO_REGISTER_MODE_WP;
if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register) < 0) {
fprintf(stderr, "UFFDIO_REGISTER failed: %d\n", errno);
return -errno;
}
/* Writeprotect a single page. */
uffd_writeprotect.range.start = (unsigned long) map;
uffd_writeprotect.range.len = HUGETLB_SIZE;
uffd_writeprotect.mode = UFFDIO_WRITEPROTECT_MODE_WP;
if (ioctl(uffd, UFFDIO_WRITEPROTECT, &uffd_writeprotect)) {
fprintf(stderr, "UFFDIO_WRITEPROTECT failed: %d\n", errno);
return -errno;
}
/* Unregister UFFD-WP without prior writeunprotection. */
uffd_range.start = (unsigned long) map;
uffd_range.len = HUGETLB_SIZE;
if (ioctl(uffd, UFFDIO_UNREGISTER, &uffd_range)) {
fprintf(stderr, "UFFDIO_UNREGISTER failed: %d\n", errno);
return -errno;
}
return 0;
}
int main(int argc, char **argv)
{
int fd;
fd = open("/dev/hugepages/tmp", O_RDWR | O_CREAT);
if (!fd) {
fprintf(stderr, "open() failed\n");
return -errno;
}
if (ftruncate(fd, HUGETLB_SIZE)) {
fprintf(stderr, "ftruncate() failed\n");
return -errno;
}
map = mmap(NULL, HUGETLB_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
if (map == MAP_FAILED) {
fprintf(stderr, "mmap() failed\n");
return -errno;
}
*map = 0;
if (temp_setup_uffd())
return 1;
*map = 0;
return 0;
}
--------------------------------------------------------------------------
Above test fails with SIGBUS when there is only a single free hugetlb page.
# echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# ./test
Bus error (core dumped)
And worse, with sufficient free hugetlb pages it will map an anonymous page
into a shared mapping, for example, messing up accounting during unmap
and breaking MAP_SHARED semantics:
# echo 2 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# ./test
# cat /proc/meminfo | grep HugePages_
HugePages_Total: 2
HugePages_Free: 1
HugePages_Rsvd: 18446744073709551615
HugePages_Surp: 0
Reason is that uffd-wp doesn't clear the uffd-wp PTE bit when
unregistering and consequently keeps the PTE writeprotected. Reason for
this is to avoid the additional overhead when unregistering. Note that
this is the case also for !hugetlb and that we will end up with writable
PTEs that still have the uffd-wp PTE bit set once we return from
hugetlb_wp(). I'm not touching the uffd-wp PTE bit for now, because it
seems to be a generic thing -- wp_page_reuse() also doesn't clear it.
VM_MAYSHARE handling in hugetlb_fault() for FAULT_FLAG_WRITE indicates
that MAP_SHARED handling was at least envisioned, but could never have
worked as expected.
While at it, make sure that we never end up in hugetlb_wp() on write
faults without VM_WRITE, because we don't support maybe_mkwrite()
semantics as commonly used in the !hugetlb case -- for example, in
wp_page_reuse().
Note that there is no need to do any kind of reservation in
hugetlb_fault() in this case ... because we already have a hugetlb page
mapped R/O that we will simply map writable and we are not dealing with
COW/unsharing.
Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com
Fixes: b1f9e876862d ("mm/uffd: enable write protection for shmem & hugetlbfs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org> [5.19]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 10:34:35 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2023-06-06 06:20:12 +00:00
|
|
|
old_folio = page_folio(pte_page(pte));
|
2006-01-06 08:10:44 +00:00
|
|
|
|
2022-06-01 22:55:25 +00:00
|
|
|
delayacct_wpcopy_start();
|
|
|
|
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
retry_avoidcopy:
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
/*
|
|
|
|
* If no-one else is actually using this page, we're the exclusive
|
|
|
|
* owner and can reuse this page.
|
2024-05-02 08:52:59 +00:00
|
|
|
*
|
|
|
|
* Note that we don't rely on the (safer) folio refcount here, because
|
|
|
|
* copying the hugetlb folio when there are unexpected (temporary)
|
|
|
|
* folio references could harm simple fork()+exit() users when
|
|
|
|
* we run out of free hugetlb folios: we would have to kill processes
|
|
|
|
* in scenarios that used to work. As a side effect, there can still
|
|
|
|
* be leaks between processes, for example, with FOLL_GET users.
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
*/
|
2023-06-06 06:20:12 +00:00
|
|
|
if (folio_mapcount(old_folio) == 1 && folio_test_anon(old_folio)) {
|
2023-10-02 14:29:47 +00:00
|
|
|
if (!PageAnonExclusive(&old_folio->page)) {
|
2023-10-02 14:29:48 +00:00
|
|
|
folio_move_anon_rmap(old_folio, vma);
|
2023-10-02 14:29:47 +00:00
|
|
|
SetPageAnonExclusive(&old_folio->page);
|
|
|
|
}
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
if (likely(!unshare))
|
2024-04-01 20:26:51 +00:00
|
|
|
set_huge_ptep_writable(vma, vmf->address, vmf->pte);
|
2022-06-01 22:55:25 +00:00
|
|
|
|
|
|
|
delayacct_wpcopy_end();
|
2007-07-19 08:47:05 +00:00
|
|
|
return 0;
|
2006-01-06 08:10:44 +00:00
|
|
|
}
|
2023-06-06 06:20:12 +00:00
|
|
|
VM_BUG_ON_PAGE(folio_test_anon(old_folio) &&
|
|
|
|
PageAnonExclusive(&old_folio->page), &old_folio->page);
|
2006-01-06 08:10:44 +00:00
|
|
|
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
/*
|
|
|
|
* If the process that created a MAP_PRIVATE mapping is about to
|
|
|
|
* perform a COW due to a shared page count, attempt to satisfy
|
|
|
|
* the allocation without using the existing reserves. The pagecache
|
|
|
|
* page is used to determine if the reserve at this address was
|
|
|
|
* consumed or not. If reserves were used, a partial faulted mapping
|
|
|
|
* at the time of fork() could consume its reserves on COW instead
|
|
|
|
* of the full address range.
|
|
|
|
*/
|
2013-09-11 21:21:55 +00:00
|
|
|
if (is_vma_resv_set(vma, HPAGE_RESV_OWNER) &&
|
2023-06-06 06:20:12 +00:00
|
|
|
old_folio != pagecache_folio)
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
outside_reserve = 1;
|
|
|
|
|
2023-06-06 06:20:12 +00:00
|
|
|
folio_get(old_folio);
|
2009-12-15 01:59:37 +00:00
|
|
|
|
2014-08-06 23:06:47 +00:00
|
|
|
/*
|
|
|
|
* Drop page table lock as buddy allocator may be called. It will
|
|
|
|
* be acquired again before returning to the caller, as expected.
|
|
|
|
*/
|
2024-04-01 20:26:51 +00:00
|
|
|
spin_unlock(vmf->ptl);
|
|
|
|
new_folio = alloc_hugetlb_folio(vma, vmf->address, outside_reserve);
|
2006-01-06 08:10:44 +00:00
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
if (IS_ERR(new_folio)) {
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
/*
|
|
|
|
* If a process owning a MAP_PRIVATE mapping fails to COW,
|
|
|
|
* it is due to references held by a child and an insufficient
|
|
|
|
* huge page pool. To guarantee the original mappers
|
|
|
|
* reliability, unmap the page from child processes. The child
|
|
|
|
* may get SIGKILLed if it later faults.
|
|
|
|
*/
|
|
|
|
if (outside_reserve) {
|
2022-09-14 22:18:09 +00:00
|
|
|
struct address_space *mapping = vma->vm_file->f_mapping;
|
|
|
|
pgoff_t idx;
|
|
|
|
u32 hash;
|
|
|
|
|
2023-06-06 06:20:12 +00:00
|
|
|
folio_put(old_folio);
|
2022-09-14 22:18:09 +00:00
|
|
|
/*
|
|
|
|
* Drop hugetlb_fault_mutex and vma_lock before
|
|
|
|
* unmapping. unmapping needs to hold vma_lock
|
|
|
|
* in write mode. Dropping vma_lock in read mode
|
|
|
|
* here is OK as COW mappings do not interact with
|
|
|
|
* PMD sharing.
|
|
|
|
*
|
|
|
|
* Reacquire both after unmap operation.
|
|
|
|
*/
|
2024-04-01 20:26:51 +00:00
|
|
|
idx = vma_hugecache_offset(h, vma, vmf->address);
|
2022-09-14 22:18:09 +00:00
|
|
|
hash = hugetlb_fault_mutex_hash(mapping, idx);
|
|
|
|
hugetlb_vma_unlock_read(vma);
|
|
|
|
mutex_unlock(&hugetlb_fault_mutex_table[hash]);
|
|
|
|
|
2024-04-01 20:26:51 +00:00
|
|
|
unmap_ref_private(mm, vma, &old_folio->page,
|
|
|
|
vmf->address);
|
2022-09-14 22:18:09 +00:00
|
|
|
|
|
|
|
mutex_lock(&hugetlb_fault_mutex_table[hash]);
|
|
|
|
hugetlb_vma_lock_read(vma);
|
2024-04-01 20:26:51 +00:00
|
|
|
spin_lock(vmf->ptl);
|
|
|
|
vmf->pte = hugetlb_walk(vma, vmf->address,
|
|
|
|
huge_page_size(h));
|
|
|
|
if (likely(vmf->pte &&
|
2024-07-02 13:51:20 +00:00
|
|
|
pte_same(huge_ptep_get(mm, vmf->address, vmf->pte), pte)))
|
2014-08-06 23:06:45 +00:00
|
|
|
goto retry_avoidcopy;
|
|
|
|
/*
|
|
|
|
* race occurs while re-acquiring page table
|
|
|
|
* lock, and our job is done.
|
|
|
|
*/
|
2022-06-01 22:55:25 +00:00
|
|
|
delayacct_wpcopy_end();
|
2014-08-06 23:06:45 +00:00
|
|
|
return 0;
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
}
|
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
ret = vmf_error(PTR_ERR(new_folio));
|
2014-08-06 23:06:47 +00:00
|
|
|
goto out_release_old;
|
2006-01-06 08:10:44 +00:00
|
|
|
}
|
|
|
|
|
2010-05-28 00:29:16 +00:00
|
|
|
/*
|
|
|
|
* When the original hugepage is shared one, it does not have
|
|
|
|
* anon_vma prepared.
|
|
|
|
*/
|
2024-02-21 23:47:31 +00:00
|
|
|
ret = vmf_anon_prepare(vmf);
|
|
|
|
if (unlikely(ret))
|
2014-08-06 23:06:47 +00:00
|
|
|
goto out_release_all;
|
2010-05-28 00:29:16 +00:00
|
|
|
|
2024-04-01 20:26:51 +00:00
|
|
|
if (copy_user_large_folio(new_folio, old_folio, vmf->real_address, vma)) {
|
2024-05-09 10:01:48 +00:00
|
|
|
ret = VM_FAULT_HWPOISON_LARGE | VM_FAULT_SET_HINDEX(hstate_index(h));
|
2023-04-13 13:13:49 +00:00
|
|
|
goto out_release_all;
|
|
|
|
}
|
2023-01-25 17:05:33 +00:00
|
|
|
__folio_mark_uptodate(new_folio);
|
2006-01-06 08:10:44 +00:00
|
|
|
|
2024-04-01 20:26:51 +00:00
|
|
|
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, mm, vmf->address,
|
|
|
|
vmf->address + huge_page_size(h));
|
2018-12-28 08:38:09 +00:00
|
|
|
mmu_notifier_invalidate_range_start(&range);
|
2014-08-06 23:06:47 +00:00
|
|
|
|
2009-12-15 01:59:37 +00:00
|
|
|
/*
|
2013-11-14 22:31:02 +00:00
|
|
|
* Retake the page table lock to check for racing updates
|
2009-12-15 01:59:37 +00:00
|
|
|
* before the page tables are altered
|
|
|
|
*/
|
2024-04-01 20:26:51 +00:00
|
|
|
spin_lock(vmf->ptl);
|
|
|
|
vmf->pte = hugetlb_walk(vma, vmf->address, huge_page_size(h));
|
2024-07-02 13:51:20 +00:00
|
|
|
if (likely(vmf->pte && pte_same(huge_ptep_get(mm, vmf->address, vmf->pte), pte))) {
|
2023-04-17 19:53:13 +00:00
|
|
|
pte_t newpte = make_huge_pte(vma, &new_folio->page, !unshare);
|
|
|
|
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
/* Break COW or unshare */
|
2024-04-01 20:26:51 +00:00
|
|
|
huge_ptep_clear_flush(vma, vmf->address, vmf->pte);
|
2023-12-20 22:44:26 +00:00
|
|
|
hugetlb_remove_rmap(old_folio);
|
2024-04-01 20:26:51 +00:00
|
|
|
hugetlb_add_new_anon_rmap(new_folio, vma, vmf->address);
|
2023-04-17 19:53:13 +00:00
|
|
|
if (huge_pte_uffd_wp(pte))
|
|
|
|
newpte = huge_pte_mkuffd_wp(newpte);
|
2024-04-01 20:26:51 +00:00
|
|
|
set_huge_pte_at(mm, vmf->address, vmf->pte, newpte,
|
|
|
|
huge_page_size(h));
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_set_hugetlb_migratable(new_folio);
|
2006-01-06 08:10:44 +00:00
|
|
|
/* Make the old page be freed below */
|
2023-06-06 06:20:12 +00:00
|
|
|
new_folio = old_folio;
|
2006-01-06 08:10:44 +00:00
|
|
|
}
|
2024-04-01 20:26:51 +00:00
|
|
|
spin_unlock(vmf->ptl);
|
2018-12-28 08:38:09 +00:00
|
|
|
mmu_notifier_invalidate_range_end(&range);
|
2014-08-06 23:06:47 +00:00
|
|
|
out_release_all:
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
/*
|
|
|
|
* No restore in case of successful pagetable update (Break COW or
|
|
|
|
* unshare)
|
|
|
|
*/
|
2023-06-06 06:20:12 +00:00
|
|
|
if (new_folio != old_folio)
|
2024-04-01 20:26:51 +00:00
|
|
|
restore_reserve_on_error(h, vma, vmf->address, new_folio);
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_put(new_folio);
|
2014-08-06 23:06:47 +00:00
|
|
|
out_release_old:
|
2023-06-06 06:20:12 +00:00
|
|
|
folio_put(old_folio);
|
2013-09-11 21:21:57 +00:00
|
|
|
|
2024-04-01 20:26:51 +00:00
|
|
|
spin_lock(vmf->ptl); /* Caller expects lock to be held */
|
2022-06-01 22:55:25 +00:00
|
|
|
|
|
|
|
delayacct_wpcopy_end();
|
2014-08-06 23:06:47 +00:00
|
|
|
return ret;
|
2006-01-06 08:10:44 +00:00
|
|
|
}
|
|
|
|
|
2009-09-22 00:03:33 +00:00
|
|
|
/*
|
|
|
|
* Return whether there is a pagecache page to back given address within VMA.
|
|
|
|
*/
|
2024-03-27 15:23:21 +00:00
|
|
|
bool hugetlbfs_pagecache_present(struct hstate *h,
|
|
|
|
struct vm_area_struct *vma, unsigned long address)
|
2009-09-22 00:03:27 +00:00
|
|
|
{
|
2023-01-25 17:05:31 +00:00
|
|
|
struct address_space *mapping = vma->vm_file->f_mapping;
|
2023-09-26 19:20:17 +00:00
|
|
|
pgoff_t idx = linear_page_index(vma, address);
|
2023-06-21 21:24:03 +00:00
|
|
|
struct folio *folio;
|
2009-09-22 00:03:27 +00:00
|
|
|
|
2023-06-21 21:24:03 +00:00
|
|
|
folio = filemap_get_folio(mapping, idx);
|
|
|
|
if (IS_ERR(folio))
|
|
|
|
return false;
|
|
|
|
folio_put(folio);
|
|
|
|
return true;
|
2009-09-22 00:03:27 +00:00
|
|
|
}
|
|
|
|
|
2023-01-25 17:05:35 +00:00
|
|
|
int hugetlb_add_to_page_cache(struct folio *folio, struct address_space *mapping,
|
2015-09-08 22:01:50 +00:00
|
|
|
pgoff_t idx)
|
|
|
|
{
|
|
|
|
struct inode *inode = mapping->host;
|
|
|
|
struct hstate *h = hstate_inode(inode);
|
2022-06-01 19:11:01 +00:00
|
|
|
int err;
|
2015-09-08 22:01:50 +00:00
|
|
|
|
2023-09-26 19:20:17 +00:00
|
|
|
idx <<= huge_page_order(h);
|
2022-06-01 19:11:01 +00:00
|
|
|
__folio_set_locked(folio);
|
|
|
|
err = __filemap_add_folio(mapping, folio, idx, GFP_KERNEL, NULL);
|
|
|
|
|
|
|
|
if (unlikely(err)) {
|
|
|
|
__folio_clear_locked(folio);
|
2015-09-08 22:01:50 +00:00
|
|
|
return err;
|
2022-06-01 19:11:01 +00:00
|
|
|
}
|
2023-01-25 17:05:35 +00:00
|
|
|
folio_clear_hugetlb_restore_reserve(folio);
|
2015-09-08 22:01:50 +00:00
|
|
|
|
2018-10-26 22:10:58 +00:00
|
|
|
/*
|
2022-06-01 19:11:01 +00:00
|
|
|
* mark folio dirty so that it will not be removed from cache/file
|
2018-10-26 22:10:58 +00:00
|
|
|
* by non-hugetlbfs specific code paths.
|
|
|
|
*/
|
2022-06-01 19:11:01 +00:00
|
|
|
folio_mark_dirty(folio);
|
2018-10-26 22:10:58 +00:00
|
|
|
|
2015-09-08 22:01:50 +00:00
|
|
|
spin_lock(&inode->i_lock);
|
|
|
|
inode->i_blocks += blocks_per_huge_page(h);
|
|
|
|
spin_unlock(&inode->i_lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2024-02-21 23:47:30 +00:00
|
|
|
static inline vm_fault_t hugetlb_handle_userfault(struct vm_fault *vmf,
|
userfaultfd: add minor fault registration mode
Patch series "userfaultfd: add minor fault handling", v9.
Overview
========
This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults. By "minor" fault, I mean the following
situation:
Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory). One of the mappings is registered with userfaultfd (in minor
mode), and the other is not. Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents. The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault. As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.
We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...). In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".
Use Case
========
Consider the use case of VM live migration (e.g. under QEMU/KVM):
1. While a VM is still running, we copy the contents of its memory to a
target machine. The pages are populated on the target by writing to the
non-UFFD mapping, using the setup described above. The VM is still running
(and therefore its memory is likely changing), so this may be repeated
several times, until we decide the target is "up to date enough".
2. We pause the VM on the source, and start executing on the target machine.
During this gap, the VM's user(s) will *see* a pause, so it is desirable to
minimize this window.
3. Between the last time any page was copied from the source to the target, and
when the VM was paused, the contents of that page may have changed - and
therefore the copy we have on the target machine is out of date. Although we
can keep track of which pages are out of date, for VMs with large amounts of
memory, it is "slow" to transfer this information to the target machine. We
want to resume execution before such a transfer would complete.
4. So, the guest begins executing on the target machine. The first time it
touches its memory (via the UFFD-registered mapping), userspace wants to
intercept this fault. Userspace checks whether or not the page is up to date,
and if not, copies the updated page from the source machine, via the non-UFFD
mapping. Finally, whether a copy was performed or not, userspace issues a
UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
are correct, carry on setting up the mapping".
We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.
Interaction with Existing APIs
==============================
Because this is a feature, a registered VMA could potentially receive both
missing and minor faults. I spent some time thinking through how the
existing API interacts with the new feature:
UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault:
- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.
UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated. This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).
- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
-ENOENT in that case (regardless of the kind of fault).
Future Work
===========
This series only supports hugetlbfs. I have a second series in flight to
support shmem as well, extending the functionality. This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.
This patch (of 6):
This feature allows userspace to intercept "minor" faults. By "minor"
faults, I mean the following situation:
Let there exist two mappings (i.e., VMAs) to the same page(s). One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not. Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents. The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault. As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.
This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered. In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.
This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].
However, doing it this was requires we allocate a VM_* flag for the new
registration mode. On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.
[1] https://lore.kernel.org/patchwork/patch/1380226/
[peterx@redhat.com: fix minor fault page leak]
Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:36 +00:00
|
|
|
struct address_space *mapping,
|
|
|
|
unsigned long reason)
|
|
|
|
{
|
|
|
|
u32 hash;
|
|
|
|
|
|
|
|
/*
|
2022-09-23 04:21:13 +00:00
|
|
|
* vma_lock and hugetlb_fault_mutex must be dropped before handling
|
|
|
|
* userfault. Also mmap_lock could be dropped due to handling
|
|
|
|
* userfault, any vma operation should be careful from here.
|
userfaultfd: add minor fault registration mode
Patch series "userfaultfd: add minor fault handling", v9.
Overview
========
This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults. By "minor" fault, I mean the following
situation:
Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory). One of the mappings is registered with userfaultfd (in minor
mode), and the other is not. Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents. The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault. As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.
We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...). In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".
Use Case
========
Consider the use case of VM live migration (e.g. under QEMU/KVM):
1. While a VM is still running, we copy the contents of its memory to a
target machine. The pages are populated on the target by writing to the
non-UFFD mapping, using the setup described above. The VM is still running
(and therefore its memory is likely changing), so this may be repeated
several times, until we decide the target is "up to date enough".
2. We pause the VM on the source, and start executing on the target machine.
During this gap, the VM's user(s) will *see* a pause, so it is desirable to
minimize this window.
3. Between the last time any page was copied from the source to the target, and
when the VM was paused, the contents of that page may have changed - and
therefore the copy we have on the target machine is out of date. Although we
can keep track of which pages are out of date, for VMs with large amounts of
memory, it is "slow" to transfer this information to the target machine. We
want to resume execution before such a transfer would complete.
4. So, the guest begins executing on the target machine. The first time it
touches its memory (via the UFFD-registered mapping), userspace wants to
intercept this fault. Userspace checks whether or not the page is up to date,
and if not, copies the updated page from the source machine, via the non-UFFD
mapping. Finally, whether a copy was performed or not, userspace issues a
UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
are correct, carry on setting up the mapping".
We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.
Interaction with Existing APIs
==============================
Because this is a feature, a registered VMA could potentially receive both
missing and minor faults. I spent some time thinking through how the
existing API interacts with the new feature:
UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault:
- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.
UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated. This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).
- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
-ENOENT in that case (regardless of the kind of fault).
Future Work
===========
This series only supports hugetlbfs. I have a second series in flight to
support shmem as well, extending the functionality. This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.
This patch (of 6):
This feature allows userspace to intercept "minor" faults. By "minor"
faults, I mean the following situation:
Let there exist two mappings (i.e., VMAs) to the same page(s). One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not. Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents. The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault. As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.
This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered. In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.
This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].
However, doing it this was requires we allocate a VM_* flag for the new
registration mode. On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.
[1] https://lore.kernel.org/patchwork/patch/1380226/
[peterx@redhat.com: fix minor fault page leak]
Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:36 +00:00
|
|
|
*/
|
2024-02-21 23:47:30 +00:00
|
|
|
hugetlb_vma_unlock_read(vmf->vma);
|
|
|
|
hash = hugetlb_fault_mutex_hash(mapping, vmf->pgoff);
|
userfaultfd: add minor fault registration mode
Patch series "userfaultfd: add minor fault handling", v9.
Overview
========
This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults. By "minor" fault, I mean the following
situation:
Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory). One of the mappings is registered with userfaultfd (in minor
mode), and the other is not. Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents. The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault. As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.
We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...). In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".
Use Case
========
Consider the use case of VM live migration (e.g. under QEMU/KVM):
1. While a VM is still running, we copy the contents of its memory to a
target machine. The pages are populated on the target by writing to the
non-UFFD mapping, using the setup described above. The VM is still running
(and therefore its memory is likely changing), so this may be repeated
several times, until we decide the target is "up to date enough".
2. We pause the VM on the source, and start executing on the target machine.
During this gap, the VM's user(s) will *see* a pause, so it is desirable to
minimize this window.
3. Between the last time any page was copied from the source to the target, and
when the VM was paused, the contents of that page may have changed - and
therefore the copy we have on the target machine is out of date. Although we
can keep track of which pages are out of date, for VMs with large amounts of
memory, it is "slow" to transfer this information to the target machine. We
want to resume execution before such a transfer would complete.
4. So, the guest begins executing on the target machine. The first time it
touches its memory (via the UFFD-registered mapping), userspace wants to
intercept this fault. Userspace checks whether or not the page is up to date,
and if not, copies the updated page from the source machine, via the non-UFFD
mapping. Finally, whether a copy was performed or not, userspace issues a
UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
are correct, carry on setting up the mapping".
We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.
Interaction with Existing APIs
==============================
Because this is a feature, a registered VMA could potentially receive both
missing and minor faults. I spent some time thinking through how the
existing API interacts with the new feature:
UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault:
- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.
UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated. This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).
- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
-ENOENT in that case (regardless of the kind of fault).
Future Work
===========
This series only supports hugetlbfs. I have a second series in flight to
support shmem as well, extending the functionality. This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.
This patch (of 6):
This feature allows userspace to intercept "minor" faults. By "minor"
faults, I mean the following situation:
Let there exist two mappings (i.e., VMAs) to the same page(s). One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not. Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents. The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault. As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.
This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered. In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.
This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].
However, doing it this was requires we allocate a VM_* flag for the new
registration mode. On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.
[1] https://lore.kernel.org/patchwork/patch/1380226/
[peterx@redhat.com: fix minor fault page leak]
Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:36 +00:00
|
|
|
mutex_unlock(&hugetlb_fault_mutex_table[hash]);
|
2024-02-21 23:47:30 +00:00
|
|
|
return handle_userfault(vmf, reason);
|
userfaultfd: add minor fault registration mode
Patch series "userfaultfd: add minor fault handling", v9.
Overview
========
This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults. By "minor" fault, I mean the following
situation:
Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory). One of the mappings is registered with userfaultfd (in minor
mode), and the other is not. Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents. The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault. As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.
We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...). In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".
Use Case
========
Consider the use case of VM live migration (e.g. under QEMU/KVM):
1. While a VM is still running, we copy the contents of its memory to a
target machine. The pages are populated on the target by writing to the
non-UFFD mapping, using the setup described above. The VM is still running
(and therefore its memory is likely changing), so this may be repeated
several times, until we decide the target is "up to date enough".
2. We pause the VM on the source, and start executing on the target machine.
During this gap, the VM's user(s) will *see* a pause, so it is desirable to
minimize this window.
3. Between the last time any page was copied from the source to the target, and
when the VM was paused, the contents of that page may have changed - and
therefore the copy we have on the target machine is out of date. Although we
can keep track of which pages are out of date, for VMs with large amounts of
memory, it is "slow" to transfer this information to the target machine. We
want to resume execution before such a transfer would complete.
4. So, the guest begins executing on the target machine. The first time it
touches its memory (via the UFFD-registered mapping), userspace wants to
intercept this fault. Userspace checks whether or not the page is up to date,
and if not, copies the updated page from the source machine, via the non-UFFD
mapping. Finally, whether a copy was performed or not, userspace issues a
UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
are correct, carry on setting up the mapping".
We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.
Interaction with Existing APIs
==============================
Because this is a feature, a registered VMA could potentially receive both
missing and minor faults. I spent some time thinking through how the
existing API interacts with the new feature:
UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault:
- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.
UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated. This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).
- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
-ENOENT in that case (regardless of the kind of fault).
Future Work
===========
This series only supports hugetlbfs. I have a second series in flight to
support shmem as well, extending the functionality. This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.
This patch (of 6):
This feature allows userspace to intercept "minor" faults. By "minor"
faults, I mean the following situation:
Let there exist two mappings (i.e., VMAs) to the same page(s). One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not. Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents. The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault. As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.
This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered. In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.
This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].
However, doing it this was requires we allocate a VM_* flag for the new
registration mode. On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.
[1] https://lore.kernel.org/patchwork/patch/1380226/
[peterx@redhat.com: fix minor fault page leak]
Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:36 +00:00
|
|
|
}
|
|
|
|
|
mm/hugetlb: fix race condition of uffd missing/minor handling
Patch series "mm/hugetlb: Fix selftest failures with write check", v3.
Currently akpm mm-unstable fails with uffd hugetlb private mapping test
randomly on a write check.
The initial bisection of that points to the recent pmd unshare series, but
it turns out there's no direction relationship with the series but only
some timing change caused the race to start trigger.
The race should be fixed in patch 1. Patch 2 is a trivial cleanup on the
similar race with hugetlb migrations, patch 3 comment on the write check
so when anyone read it again it'll be clear why it's there.
This patch (of 3):
After the recent rework patchset of hugetlb locking on pmd sharing,
kselftest for userfaultfd sometimes fails on hugetlb private tests with
unexpected write fault checks.
It turns out there's nothing wrong within the locking series regarding
this matter, but it could have changed the timing of threads so it can
trigger an old bug.
The real bug is when we call hugetlb_no_page() we're not with the pgtable
lock. It means we're reading the pte values lockless. It's perfectly
fine in most cases because before we do normal page allocations we'll take
the lock and check pte_same() again. However before that, there are
actually two paths on userfaultfd missing/minor handling that may directly
move on with the fault process without checking the pte values.
It means for these two paths we may be generating an uffd message based on
an unstable pte, while an unstable pte can legally be anything as long as
the modifier holds the pgtable lock.
One example, which is also what happened in the failing kselftest and
caused the test failure, is that for private mappings wr-protection
changes can happen on one page. While hugetlb_change_protection()
generally requires pte being cleared before being changed, then there can
be a race condition like:
thread 1 thread 2
-------- --------
UFFDIO_WRITEPROTECT hugetlb_fault
hugetlb_change_protection
pgtable_lock()
huge_ptep_modify_prot_start
pte==NULL
hugetlb_no_page
generate uffd missing event
even if page existed!!
huge_ptep_modify_prot_commit
pgtable_unlock()
Fix this by rechecking the pte after pgtable lock for both userfaultfd
missing & minor fault paths.
This bug should have been around starting from uffd hugetlb introduced, so
attaching a Fixes to the commit. Also attach another Fixes to the minor
support commit for easier tracking.
Note that userfaultfd is actually fine with false positives (e.g. caused
by pte changed), but not wrong logical events (e.g. caused by reading a
pte during changing). The latter can confuse the userspace, so the
strictness is very much preferred. E.g., MISSING event should never
happen on the page after UFFDIO_COPY has correctly installed the page and
returned.
Link: https://lkml.kernel.org/r/20221004193400.110155-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221004193400.110155-2-peterx@redhat.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04 19:33:58 +00:00
|
|
|
/*
|
|
|
|
* Recheck pte with pgtable lock. Returns true if pte didn't change, or
|
|
|
|
* false if pte changed or is changing.
|
|
|
|
*/
|
2024-07-02 13:51:20 +00:00
|
|
|
static bool hugetlb_pte_stable(struct hstate *h, struct mm_struct *mm, unsigned long addr,
|
mm/hugetlb: fix race condition of uffd missing/minor handling
Patch series "mm/hugetlb: Fix selftest failures with write check", v3.
Currently akpm mm-unstable fails with uffd hugetlb private mapping test
randomly on a write check.
The initial bisection of that points to the recent pmd unshare series, but
it turns out there's no direction relationship with the series but only
some timing change caused the race to start trigger.
The race should be fixed in patch 1. Patch 2 is a trivial cleanup on the
similar race with hugetlb migrations, patch 3 comment on the write check
so when anyone read it again it'll be clear why it's there.
This patch (of 3):
After the recent rework patchset of hugetlb locking on pmd sharing,
kselftest for userfaultfd sometimes fails on hugetlb private tests with
unexpected write fault checks.
It turns out there's nothing wrong within the locking series regarding
this matter, but it could have changed the timing of threads so it can
trigger an old bug.
The real bug is when we call hugetlb_no_page() we're not with the pgtable
lock. It means we're reading the pte values lockless. It's perfectly
fine in most cases because before we do normal page allocations we'll take
the lock and check pte_same() again. However before that, there are
actually two paths on userfaultfd missing/minor handling that may directly
move on with the fault process without checking the pte values.
It means for these two paths we may be generating an uffd message based on
an unstable pte, while an unstable pte can legally be anything as long as
the modifier holds the pgtable lock.
One example, which is also what happened in the failing kselftest and
caused the test failure, is that for private mappings wr-protection
changes can happen on one page. While hugetlb_change_protection()
generally requires pte being cleared before being changed, then there can
be a race condition like:
thread 1 thread 2
-------- --------
UFFDIO_WRITEPROTECT hugetlb_fault
hugetlb_change_protection
pgtable_lock()
huge_ptep_modify_prot_start
pte==NULL
hugetlb_no_page
generate uffd missing event
even if page existed!!
huge_ptep_modify_prot_commit
pgtable_unlock()
Fix this by rechecking the pte after pgtable lock for both userfaultfd
missing & minor fault paths.
This bug should have been around starting from uffd hugetlb introduced, so
attaching a Fixes to the commit. Also attach another Fixes to the minor
support commit for easier tracking.
Note that userfaultfd is actually fine with false positives (e.g. caused
by pte changed), but not wrong logical events (e.g. caused by reading a
pte during changing). The latter can confuse the userspace, so the
strictness is very much preferred. E.g., MISSING event should never
happen on the page after UFFDIO_COPY has correctly installed the page and
returned.
Link: https://lkml.kernel.org/r/20221004193400.110155-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221004193400.110155-2-peterx@redhat.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04 19:33:58 +00:00
|
|
|
pte_t *ptep, pte_t old_pte)
|
|
|
|
{
|
|
|
|
spinlock_t *ptl;
|
|
|
|
bool same;
|
|
|
|
|
|
|
|
ptl = huge_pte_lock(h, mm, ptep);
|
2024-07-02 13:51:20 +00:00
|
|
|
same = pte_same(huge_ptep_get(mm, addr, ptep), old_pte);
|
mm/hugetlb: fix race condition of uffd missing/minor handling
Patch series "mm/hugetlb: Fix selftest failures with write check", v3.
Currently akpm mm-unstable fails with uffd hugetlb private mapping test
randomly on a write check.
The initial bisection of that points to the recent pmd unshare series, but
it turns out there's no direction relationship with the series but only
some timing change caused the race to start trigger.
The race should be fixed in patch 1. Patch 2 is a trivial cleanup on the
similar race with hugetlb migrations, patch 3 comment on the write check
so when anyone read it again it'll be clear why it's there.
This patch (of 3):
After the recent rework patchset of hugetlb locking on pmd sharing,
kselftest for userfaultfd sometimes fails on hugetlb private tests with
unexpected write fault checks.
It turns out there's nothing wrong within the locking series regarding
this matter, but it could have changed the timing of threads so it can
trigger an old bug.
The real bug is when we call hugetlb_no_page() we're not with the pgtable
lock. It means we're reading the pte values lockless. It's perfectly
fine in most cases because before we do normal page allocations we'll take
the lock and check pte_same() again. However before that, there are
actually two paths on userfaultfd missing/minor handling that may directly
move on with the fault process without checking the pte values.
It means for these two paths we may be generating an uffd message based on
an unstable pte, while an unstable pte can legally be anything as long as
the modifier holds the pgtable lock.
One example, which is also what happened in the failing kselftest and
caused the test failure, is that for private mappings wr-protection
changes can happen on one page. While hugetlb_change_protection()
generally requires pte being cleared before being changed, then there can
be a race condition like:
thread 1 thread 2
-------- --------
UFFDIO_WRITEPROTECT hugetlb_fault
hugetlb_change_protection
pgtable_lock()
huge_ptep_modify_prot_start
pte==NULL
hugetlb_no_page
generate uffd missing event
even if page existed!!
huge_ptep_modify_prot_commit
pgtable_unlock()
Fix this by rechecking the pte after pgtable lock for both userfaultfd
missing & minor fault paths.
This bug should have been around starting from uffd hugetlb introduced, so
attaching a Fixes to the commit. Also attach another Fixes to the minor
support commit for easier tracking.
Note that userfaultfd is actually fine with false positives (e.g. caused
by pte changed), but not wrong logical events (e.g. caused by reading a
pte during changing). The latter can confuse the userspace, so the
strictness is very much preferred. E.g., MISSING event should never
happen on the page after UFFDIO_COPY has correctly installed the page and
returned.
Link: https://lkml.kernel.org/r/20221004193400.110155-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221004193400.110155-2-peterx@redhat.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04 19:33:58 +00:00
|
|
|
spin_unlock(ptl);
|
|
|
|
|
|
|
|
return same;
|
|
|
|
}
|
|
|
|
|
2024-04-01 20:26:50 +00:00
|
|
|
static vm_fault_t hugetlb_no_page(struct address_space *mapping,
|
2024-02-21 23:47:30 +00:00
|
|
|
struct vm_fault *vmf)
|
2005-10-20 15:24:28 +00:00
|
|
|
{
|
2024-04-01 20:26:50 +00:00
|
|
|
struct vm_area_struct *vma = vmf->vma;
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = hstate_vma(vma);
|
2018-08-24 00:01:36 +00:00
|
|
|
vm_fault_t ret = VM_FAULT_SIGBUS;
|
2012-01-20 22:34:13 +00:00
|
|
|
int anon_rmap = 0;
|
2005-10-30 01:16:46 +00:00
|
|
|
unsigned long size;
|
2023-01-25 17:05:33 +00:00
|
|
|
struct folio *folio;
|
2006-01-06 08:10:44 +00:00
|
|
|
pte_t new_pte;
|
2023-01-25 17:05:33 +00:00
|
|
|
bool new_folio, new_pagecache_folio = false;
|
2024-04-01 20:26:50 +00:00
|
|
|
u32 hash = hugetlb_fault_mutex_hash(mapping, vmf->pgoff);
|
2005-10-30 01:16:46 +00:00
|
|
|
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
/*
|
|
|
|
* Currently, we are forced to kill the process in the event the
|
|
|
|
* original mapper has unmapped pages from the child due to a failed
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
* COW/unsharing. Warn that such a situation has occurred as it may not
|
|
|
|
* be obvious.
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
*/
|
|
|
|
if (is_vma_resv_set(vma, HPAGE_RESV_UNMAPPED)) {
|
mm/hugetlb: hugetlb_no_page: rate-limit warning message
The warning message "killed due to inadequate hugepage pool" simply
indicates that SIGBUS was sent, not that the process was forcibly killed.
If the process has a signal handler installed does not fix the problem,
this message can rapidly spam the kernel log.
On my amd64 dev machine that does not have hugepages configured, I can
reproduce the repeated warnings easily by setting vm.nr_hugepages=2 (i.e.,
4 megabytes of huge pages) and running something that sets a signal
handler and forks, like
#include <sys/mman.h>
#include <signal.h>
#include <stdlib.h>
#include <unistd.h>
sig_atomic_t counter = 10;
void handler(int signal)
{
if (counter-- == 0)
exit(0);
}
int main(void)
{
int status;
char *addr = mmap(NULL, 4 * 1048576, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0);
if (addr == MAP_FAILED) {perror("mmap"); return 1;}
*addr = 'x';
switch (fork()) {
case -1:
perror("fork"); return 1;
case 0:
signal(SIGBUS, handler);
*addr = 'x';
break;
default:
*addr = 'x';
wait(&status);
if (WIFSIGNALED(status)) {
psignal(WTERMSIG(status), "child");
}
break;
}
}
Signed-off-by: Geoffrey Thomas <geofft@ldpreload.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-09 22:08:04 +00:00
|
|
|
pr_warn_ratelimited("PID %d killed due to inadequate hugepage pool\n",
|
2013-02-23 00:32:08 +00:00
|
|
|
current->pid);
|
2022-09-23 04:21:13 +00:00
|
|
|
goto out;
|
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:25 +00:00
|
|
|
}
|
|
|
|
|
2005-10-30 01:16:46 +00:00
|
|
|
/*
|
hugetlbfs: revert use i_mmap_rwsem to address page fault/truncate race
Patch series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", v2.
hugetlb fault scalability regressions have recently been reported [1].
This is not the first such report, as regressions were also noted when
commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") was added [2] in v5.7. At that time, a proposal to
address the regression was suggested [3] but went nowhere.
The regression and benefit of this patch series is not evident when
using the vm_scalability benchmark reported in [2] on a recent kernel.
Results from running,
"./usemem -n 48 --prealloc --prefault -O -U 3448054972"
48 sample Avg
next-20220913 next-20220913 next-20220913
unmodified revert i_mmap_sema locking vma sema locking, this series
-----------------------------------------------------------------------------
498150 KB/s 501934 KB/s 504793 KB/s
The recent regression report [1] notes page fault and fork latency of
shared hugetlb mappings. To measure this, I created two simple programs:
1) map a shared hugetlb area, write fault all pages, unmap area
Do this in a continuous loop to measure faults per second
2) map a shared hugetlb area, write fault a few pages, fork and exit
Do this in a continuous loop to measure forks per second
These programs were run on a 48 CPU VM with 320GB memory. The shared
mapping size was 250GB. For comparison, a single instance of the program
was run. Then, multiple instances were run in parallel to introduce
lock contention. Changing the locking scheme results in a significant
performance benefit.
test instances unmodified revert vma
--------------------------------------------------------------------------
faults per sec 1 393043 395680 389932
faults per sec 24 71405 81191 79048
forks per sec 1 2802 2747 2725
forks per sec 24 439 536 500
Combined faults 24 1621 68070 53662
Combined forks 24 358 67 142
Combined test is when running both faulting program and forking program
simultaneously.
Patches 1 and 2 of this series revert c0d0381ade79 and 87bf91d39bb5 which
depends on c0d0381ade79. Acquisition of i_mmap_rwsem is still required in
the fault path to establish pmd sharing, so this is moved back to
huge_pmd_share. With c0d0381ade79 reverted, this race is exposed:
Faulting thread Unsharing thread
... ...
ptep = huge_pte_offset()
or
ptep = huge_pte_alloc()
...
i_mmap_lock_write
lock page table
ptep invalid <------------------------ huge_pmd_unshare()
Could be in a previously unlock_page_table
sharing process or worse i_mmap_unlock_write
...
ptl = huge_pte_lock(ptep)
get/update pte
set_pte_at(pte, ptep)
Reverting 87bf91d39bb5 exposes races in page fault/file truncation. When
the new vma lock is put to use in patch 8, this will handle the fault/file
truncation races. This is explained in patch 9 where code associated with
these races is cleaned up.
Patches 3 - 5 restructure existing code in preparation for using the new
vma lock (rw semaphore) for pmd sharing synchronization. The idea is that
this semaphore will be held in read mode for the duration of fault
processing, and held in write mode for unmap operations which may call
huge_pmd_unshare. Acquiring i_mmap_rwsem is also still required to
synchronize huge pmd sharing. However it is only required in the fault
path when setting up sharing, and will be acquired in huge_pmd_share().
Patch 6 adds the new vma lock and all supporting routines, but does not
actually change code to use the new lock.
Patch 7 refactors code in preparation for using the new lock. And, patch
8 finally adds code to make use of this new vma lock. Unfortunately, the
fault code and truncate/hole punch code would naturally take locks in the
opposite order which could lead to deadlock. Since the performance of
page faults is more important, the truncation/hole punch code is modified
to back out and take locks in the correct order if necessary.
[1] https://lore.kernel.org/linux-mm/43faf292-245b-5db5-cce9-369d8fb6bd21@infradead.org/
[2] https://lore.kernel.org/lkml/20200622005551.GK5535@shao2-debian/
[3] https://lore.kernel.org/linux-mm/20200706202615.32111-1-mike.kravetz@oracle.com/
This patch (of 9):
Commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") added code to take i_mmap_rwsem in read mode for the
duration of fault processing. The use of i_mmap_rwsem to prevent
fault/truncate races depends on this. However, this has been shown to
cause performance/scaling issues. As a result, that code will be
reverted. Since the use i_mmap_rwsem to address page fault/truncate races
depends on this, it must also be reverted.
In a subsequent patch, code will be added to detect the fault/truncate
race and back out operations as required.
Link: https://lkml.kernel.org/r/20220914221810.95771-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220914221810.95771-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:02 +00:00
|
|
|
* Use page lock to guard against racing truncation
|
|
|
|
* before we get page_table_lock.
|
2005-10-30 01:16:46 +00:00
|
|
|
*/
|
2023-01-25 17:05:33 +00:00
|
|
|
new_folio = false;
|
2024-04-01 20:26:50 +00:00
|
|
|
folio = filemap_lock_hugetlb_folio(h, mapping, vmf->pgoff);
|
2023-03-07 14:34:10 +00:00
|
|
|
if (IS_ERR(folio)) {
|
hugetlbfs: revert use i_mmap_rwsem to address page fault/truncate race
Patch series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", v2.
hugetlb fault scalability regressions have recently been reported [1].
This is not the first such report, as regressions were also noted when
commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") was added [2] in v5.7. At that time, a proposal to
address the regression was suggested [3] but went nowhere.
The regression and benefit of this patch series is not evident when
using the vm_scalability benchmark reported in [2] on a recent kernel.
Results from running,
"./usemem -n 48 --prealloc --prefault -O -U 3448054972"
48 sample Avg
next-20220913 next-20220913 next-20220913
unmodified revert i_mmap_sema locking vma sema locking, this series
-----------------------------------------------------------------------------
498150 KB/s 501934 KB/s 504793 KB/s
The recent regression report [1] notes page fault and fork latency of
shared hugetlb mappings. To measure this, I created two simple programs:
1) map a shared hugetlb area, write fault all pages, unmap area
Do this in a continuous loop to measure faults per second
2) map a shared hugetlb area, write fault a few pages, fork and exit
Do this in a continuous loop to measure forks per second
These programs were run on a 48 CPU VM with 320GB memory. The shared
mapping size was 250GB. For comparison, a single instance of the program
was run. Then, multiple instances were run in parallel to introduce
lock contention. Changing the locking scheme results in a significant
performance benefit.
test instances unmodified revert vma
--------------------------------------------------------------------------
faults per sec 1 393043 395680 389932
faults per sec 24 71405 81191 79048
forks per sec 1 2802 2747 2725
forks per sec 24 439 536 500
Combined faults 24 1621 68070 53662
Combined forks 24 358 67 142
Combined test is when running both faulting program and forking program
simultaneously.
Patches 1 and 2 of this series revert c0d0381ade79 and 87bf91d39bb5 which
depends on c0d0381ade79. Acquisition of i_mmap_rwsem is still required in
the fault path to establish pmd sharing, so this is moved back to
huge_pmd_share. With c0d0381ade79 reverted, this race is exposed:
Faulting thread Unsharing thread
... ...
ptep = huge_pte_offset()
or
ptep = huge_pte_alloc()
...
i_mmap_lock_write
lock page table
ptep invalid <------------------------ huge_pmd_unshare()
Could be in a previously unlock_page_table
sharing process or worse i_mmap_unlock_write
...
ptl = huge_pte_lock(ptep)
get/update pte
set_pte_at(pte, ptep)
Reverting 87bf91d39bb5 exposes races in page fault/file truncation. When
the new vma lock is put to use in patch 8, this will handle the fault/file
truncation races. This is explained in patch 9 where code associated with
these races is cleaned up.
Patches 3 - 5 restructure existing code in preparation for using the new
vma lock (rw semaphore) for pmd sharing synchronization. The idea is that
this semaphore will be held in read mode for the duration of fault
processing, and held in write mode for unmap operations which may call
huge_pmd_unshare. Acquiring i_mmap_rwsem is also still required to
synchronize huge pmd sharing. However it is only required in the fault
path when setting up sharing, and will be acquired in huge_pmd_share().
Patch 6 adds the new vma lock and all supporting routines, but does not
actually change code to use the new lock.
Patch 7 refactors code in preparation for using the new lock. And, patch
8 finally adds code to make use of this new vma lock. Unfortunately, the
fault code and truncate/hole punch code would naturally take locks in the
opposite order which could lead to deadlock. Since the performance of
page faults is more important, the truncation/hole punch code is modified
to back out and take locks in the correct order if necessary.
[1] https://lore.kernel.org/linux-mm/43faf292-245b-5db5-cce9-369d8fb6bd21@infradead.org/
[2] https://lore.kernel.org/lkml/20200622005551.GK5535@shao2-debian/
[3] https://lore.kernel.org/linux-mm/20200706202615.32111-1-mike.kravetz@oracle.com/
This patch (of 9):
Commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") added code to take i_mmap_rwsem in read mode for the
duration of fault processing. The use of i_mmap_rwsem to prevent
fault/truncate races depends on this. However, this has been shown to
cause performance/scaling issues. As a result, that code will be
reverted. Since the use i_mmap_rwsem to address page fault/truncate races
depends on this, it must also be reverted.
In a subsequent patch, code will be added to detect the fault/truncate
race and back out operations as required.
Link: https://lkml.kernel.org/r/20220914221810.95771-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220914221810.95771-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:02 +00:00
|
|
|
size = i_size_read(mapping->host) >> huge_page_shift(h);
|
2024-04-01 20:26:50 +00:00
|
|
|
if (vmf->pgoff >= size)
|
hugetlbfs: revert use i_mmap_rwsem to address page fault/truncate race
Patch series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", v2.
hugetlb fault scalability regressions have recently been reported [1].
This is not the first such report, as regressions were also noted when
commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") was added [2] in v5.7. At that time, a proposal to
address the regression was suggested [3] but went nowhere.
The regression and benefit of this patch series is not evident when
using the vm_scalability benchmark reported in [2] on a recent kernel.
Results from running,
"./usemem -n 48 --prealloc --prefault -O -U 3448054972"
48 sample Avg
next-20220913 next-20220913 next-20220913
unmodified revert i_mmap_sema locking vma sema locking, this series
-----------------------------------------------------------------------------
498150 KB/s 501934 KB/s 504793 KB/s
The recent regression report [1] notes page fault and fork latency of
shared hugetlb mappings. To measure this, I created two simple programs:
1) map a shared hugetlb area, write fault all pages, unmap area
Do this in a continuous loop to measure faults per second
2) map a shared hugetlb area, write fault a few pages, fork and exit
Do this in a continuous loop to measure forks per second
These programs were run on a 48 CPU VM with 320GB memory. The shared
mapping size was 250GB. For comparison, a single instance of the program
was run. Then, multiple instances were run in parallel to introduce
lock contention. Changing the locking scheme results in a significant
performance benefit.
test instances unmodified revert vma
--------------------------------------------------------------------------
faults per sec 1 393043 395680 389932
faults per sec 24 71405 81191 79048
forks per sec 1 2802 2747 2725
forks per sec 24 439 536 500
Combined faults 24 1621 68070 53662
Combined forks 24 358 67 142
Combined test is when running both faulting program and forking program
simultaneously.
Patches 1 and 2 of this series revert c0d0381ade79 and 87bf91d39bb5 which
depends on c0d0381ade79. Acquisition of i_mmap_rwsem is still required in
the fault path to establish pmd sharing, so this is moved back to
huge_pmd_share. With c0d0381ade79 reverted, this race is exposed:
Faulting thread Unsharing thread
... ...
ptep = huge_pte_offset()
or
ptep = huge_pte_alloc()
...
i_mmap_lock_write
lock page table
ptep invalid <------------------------ huge_pmd_unshare()
Could be in a previously unlock_page_table
sharing process or worse i_mmap_unlock_write
...
ptl = huge_pte_lock(ptep)
get/update pte
set_pte_at(pte, ptep)
Reverting 87bf91d39bb5 exposes races in page fault/file truncation. When
the new vma lock is put to use in patch 8, this will handle the fault/file
truncation races. This is explained in patch 9 where code associated with
these races is cleaned up.
Patches 3 - 5 restructure existing code in preparation for using the new
vma lock (rw semaphore) for pmd sharing synchronization. The idea is that
this semaphore will be held in read mode for the duration of fault
processing, and held in write mode for unmap operations which may call
huge_pmd_unshare. Acquiring i_mmap_rwsem is also still required to
synchronize huge pmd sharing. However it is only required in the fault
path when setting up sharing, and will be acquired in huge_pmd_share().
Patch 6 adds the new vma lock and all supporting routines, but does not
actually change code to use the new lock.
Patch 7 refactors code in preparation for using the new lock. And, patch
8 finally adds code to make use of this new vma lock. Unfortunately, the
fault code and truncate/hole punch code would naturally take locks in the
opposite order which could lead to deadlock. Since the performance of
page faults is more important, the truncation/hole punch code is modified
to back out and take locks in the correct order if necessary.
[1] https://lore.kernel.org/linux-mm/43faf292-245b-5db5-cce9-369d8fb6bd21@infradead.org/
[2] https://lore.kernel.org/lkml/20200622005551.GK5535@shao2-debian/
[3] https://lore.kernel.org/linux-mm/20200706202615.32111-1-mike.kravetz@oracle.com/
This patch (of 9):
Commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") added code to take i_mmap_rwsem in read mode for the
duration of fault processing. The use of i_mmap_rwsem to prevent
fault/truncate races depends on this. However, this has been shown to
cause performance/scaling issues. As a result, that code will be
reverted. Since the use i_mmap_rwsem to address page fault/truncate races
depends on this, it must also be reverted.
In a subsequent patch, code will be added to detect the fault/truncate
race and back out operations as required.
Link: https://lkml.kernel.org/r/20220914221810.95771-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220914221810.95771-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:02 +00:00
|
|
|
goto out;
|
userfaultfd: add minor fault registration mode
Patch series "userfaultfd: add minor fault handling", v9.
Overview
========
This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults. By "minor" fault, I mean the following
situation:
Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory). One of the mappings is registered with userfaultfd (in minor
mode), and the other is not. Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents. The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault. As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.
We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...). In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".
Use Case
========
Consider the use case of VM live migration (e.g. under QEMU/KVM):
1. While a VM is still running, we copy the contents of its memory to a
target machine. The pages are populated on the target by writing to the
non-UFFD mapping, using the setup described above. The VM is still running
(and therefore its memory is likely changing), so this may be repeated
several times, until we decide the target is "up to date enough".
2. We pause the VM on the source, and start executing on the target machine.
During this gap, the VM's user(s) will *see* a pause, so it is desirable to
minimize this window.
3. Between the last time any page was copied from the source to the target, and
when the VM was paused, the contents of that page may have changed - and
therefore the copy we have on the target machine is out of date. Although we
can keep track of which pages are out of date, for VMs with large amounts of
memory, it is "slow" to transfer this information to the target machine. We
want to resume execution before such a transfer would complete.
4. So, the guest begins executing on the target machine. The first time it
touches its memory (via the UFFD-registered mapping), userspace wants to
intercept this fault. Userspace checks whether or not the page is up to date,
and if not, copies the updated page from the source machine, via the non-UFFD
mapping. Finally, whether a copy was performed or not, userspace issues a
UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
are correct, carry on setting up the mapping".
We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.
Interaction with Existing APIs
==============================
Because this is a feature, a registered VMA could potentially receive both
missing and minor faults. I spent some time thinking through how the
existing API interacts with the new feature:
UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault:
- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.
UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated. This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).
- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
-ENOENT in that case (regardless of the kind of fault).
Future Work
===========
This series only supports hugetlbfs. I have a second series in flight to
support shmem as well, extending the functionality. This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.
This patch (of 6):
This feature allows userspace to intercept "minor" faults. By "minor"
faults, I mean the following situation:
Let there exist two mappings (i.e., VMAs) to the same page(s). One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not. Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents. The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault. As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.
This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered. In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.
This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].
However, doing it this was requires we allocate a VM_* flag for the new
registration mode. On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.
[1] https://lore.kernel.org/patchwork/patch/1380226/
[peterx@redhat.com: fix minor fault page leak]
Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:36 +00:00
|
|
|
/* Check for page in userfault range */
|
mm/hugetlb: fix race condition of uffd missing/minor handling
Patch series "mm/hugetlb: Fix selftest failures with write check", v3.
Currently akpm mm-unstable fails with uffd hugetlb private mapping test
randomly on a write check.
The initial bisection of that points to the recent pmd unshare series, but
it turns out there's no direction relationship with the series but only
some timing change caused the race to start trigger.
The race should be fixed in patch 1. Patch 2 is a trivial cleanup on the
similar race with hugetlb migrations, patch 3 comment on the write check
so when anyone read it again it'll be clear why it's there.
This patch (of 3):
After the recent rework patchset of hugetlb locking on pmd sharing,
kselftest for userfaultfd sometimes fails on hugetlb private tests with
unexpected write fault checks.
It turns out there's nothing wrong within the locking series regarding
this matter, but it could have changed the timing of threads so it can
trigger an old bug.
The real bug is when we call hugetlb_no_page() we're not with the pgtable
lock. It means we're reading the pte values lockless. It's perfectly
fine in most cases because before we do normal page allocations we'll take
the lock and check pte_same() again. However before that, there are
actually two paths on userfaultfd missing/minor handling that may directly
move on with the fault process without checking the pte values.
It means for these two paths we may be generating an uffd message based on
an unstable pte, while an unstable pte can legally be anything as long as
the modifier holds the pgtable lock.
One example, which is also what happened in the failing kselftest and
caused the test failure, is that for private mappings wr-protection
changes can happen on one page. While hugetlb_change_protection()
generally requires pte being cleared before being changed, then there can
be a race condition like:
thread 1 thread 2
-------- --------
UFFDIO_WRITEPROTECT hugetlb_fault
hugetlb_change_protection
pgtable_lock()
huge_ptep_modify_prot_start
pte==NULL
hugetlb_no_page
generate uffd missing event
even if page existed!!
huge_ptep_modify_prot_commit
pgtable_unlock()
Fix this by rechecking the pte after pgtable lock for both userfaultfd
missing & minor fault paths.
This bug should have been around starting from uffd hugetlb introduced, so
attaching a Fixes to the commit. Also attach another Fixes to the minor
support commit for easier tracking.
Note that userfaultfd is actually fine with false positives (e.g. caused
by pte changed), but not wrong logical events (e.g. caused by reading a
pte during changing). The latter can confuse the userspace, so the
strictness is very much preferred. E.g., MISSING event should never
happen on the page after UFFDIO_COPY has correctly installed the page and
returned.
Link: https://lkml.kernel.org/r/20221004193400.110155-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221004193400.110155-2-peterx@redhat.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04 19:33:58 +00:00
|
|
|
if (userfaultfd_missing(vma)) {
|
|
|
|
/*
|
|
|
|
* Since hugetlb_no_page() was examining pte
|
|
|
|
* without pgtable lock, we need to re-test under
|
|
|
|
* lock because the pte may not be stable and could
|
|
|
|
* have changed from under us. Try to detect
|
|
|
|
* either changed or during-changing ptes and retry
|
|
|
|
* properly when needed.
|
|
|
|
*
|
|
|
|
* Note that userfaultfd is actually fine with
|
|
|
|
* false positives (e.g. caused by pte changed),
|
|
|
|
* but not wrong logical events (e.g. caused by
|
|
|
|
* reading a pte during changing). The latter can
|
|
|
|
* confuse the userspace, so the strictness is very
|
|
|
|
* much preferred. E.g., MISSING event should
|
|
|
|
* never happen on the page after UFFDIO_COPY has
|
|
|
|
* correctly installed the page and returned.
|
|
|
|
*/
|
2024-07-02 13:51:20 +00:00
|
|
|
if (!hugetlb_pte_stable(h, mm, vmf->address, vmf->pte, vmf->orig_pte)) {
|
mm/hugetlb: fix race condition of uffd missing/minor handling
Patch series "mm/hugetlb: Fix selftest failures with write check", v3.
Currently akpm mm-unstable fails with uffd hugetlb private mapping test
randomly on a write check.
The initial bisection of that points to the recent pmd unshare series, but
it turns out there's no direction relationship with the series but only
some timing change caused the race to start trigger.
The race should be fixed in patch 1. Patch 2 is a trivial cleanup on the
similar race with hugetlb migrations, patch 3 comment on the write check
so when anyone read it again it'll be clear why it's there.
This patch (of 3):
After the recent rework patchset of hugetlb locking on pmd sharing,
kselftest for userfaultfd sometimes fails on hugetlb private tests with
unexpected write fault checks.
It turns out there's nothing wrong within the locking series regarding
this matter, but it could have changed the timing of threads so it can
trigger an old bug.
The real bug is when we call hugetlb_no_page() we're not with the pgtable
lock. It means we're reading the pte values lockless. It's perfectly
fine in most cases because before we do normal page allocations we'll take
the lock and check pte_same() again. However before that, there are
actually two paths on userfaultfd missing/minor handling that may directly
move on with the fault process without checking the pte values.
It means for these two paths we may be generating an uffd message based on
an unstable pte, while an unstable pte can legally be anything as long as
the modifier holds the pgtable lock.
One example, which is also what happened in the failing kselftest and
caused the test failure, is that for private mappings wr-protection
changes can happen on one page. While hugetlb_change_protection()
generally requires pte being cleared before being changed, then there can
be a race condition like:
thread 1 thread 2
-------- --------
UFFDIO_WRITEPROTECT hugetlb_fault
hugetlb_change_protection
pgtable_lock()
huge_ptep_modify_prot_start
pte==NULL
hugetlb_no_page
generate uffd missing event
even if page existed!!
huge_ptep_modify_prot_commit
pgtable_unlock()
Fix this by rechecking the pte after pgtable lock for both userfaultfd
missing & minor fault paths.
This bug should have been around starting from uffd hugetlb introduced, so
attaching a Fixes to the commit. Also attach another Fixes to the minor
support commit for easier tracking.
Note that userfaultfd is actually fine with false positives (e.g. caused
by pte changed), but not wrong logical events (e.g. caused by reading a
pte during changing). The latter can confuse the userspace, so the
strictness is very much preferred. E.g., MISSING event should never
happen on the page after UFFDIO_COPY has correctly installed the page and
returned.
Link: https://lkml.kernel.org/r/20221004193400.110155-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221004193400.110155-2-peterx@redhat.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04 19:33:58 +00:00
|
|
|
ret = 0;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2024-02-21 23:47:30 +00:00
|
|
|
return hugetlb_handle_userfault(vmf, mapping,
|
mm/hugetlb: fix race condition of uffd missing/minor handling
Patch series "mm/hugetlb: Fix selftest failures with write check", v3.
Currently akpm mm-unstable fails with uffd hugetlb private mapping test
randomly on a write check.
The initial bisection of that points to the recent pmd unshare series, but
it turns out there's no direction relationship with the series but only
some timing change caused the race to start trigger.
The race should be fixed in patch 1. Patch 2 is a trivial cleanup on the
similar race with hugetlb migrations, patch 3 comment on the write check
so when anyone read it again it'll be clear why it's there.
This patch (of 3):
After the recent rework patchset of hugetlb locking on pmd sharing,
kselftest for userfaultfd sometimes fails on hugetlb private tests with
unexpected write fault checks.
It turns out there's nothing wrong within the locking series regarding
this matter, but it could have changed the timing of threads so it can
trigger an old bug.
The real bug is when we call hugetlb_no_page() we're not with the pgtable
lock. It means we're reading the pte values lockless. It's perfectly
fine in most cases because before we do normal page allocations we'll take
the lock and check pte_same() again. However before that, there are
actually two paths on userfaultfd missing/minor handling that may directly
move on with the fault process without checking the pte values.
It means for these two paths we may be generating an uffd message based on
an unstable pte, while an unstable pte can legally be anything as long as
the modifier holds the pgtable lock.
One example, which is also what happened in the failing kselftest and
caused the test failure, is that for private mappings wr-protection
changes can happen on one page. While hugetlb_change_protection()
generally requires pte being cleared before being changed, then there can
be a race condition like:
thread 1 thread 2
-------- --------
UFFDIO_WRITEPROTECT hugetlb_fault
hugetlb_change_protection
pgtable_lock()
huge_ptep_modify_prot_start
pte==NULL
hugetlb_no_page
generate uffd missing event
even if page existed!!
huge_ptep_modify_prot_commit
pgtable_unlock()
Fix this by rechecking the pte after pgtable lock for both userfaultfd
missing & minor fault paths.
This bug should have been around starting from uffd hugetlb introduced, so
attaching a Fixes to the commit. Also attach another Fixes to the minor
support commit for easier tracking.
Note that userfaultfd is actually fine with false positives (e.g. caused
by pte changed), but not wrong logical events (e.g. caused by reading a
pte during changing). The latter can confuse the userspace, so the
strictness is very much preferred. E.g., MISSING event should never
happen on the page after UFFDIO_COPY has correctly installed the page and
returned.
Link: https://lkml.kernel.org/r/20221004193400.110155-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221004193400.110155-2-peterx@redhat.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04 19:33:58 +00:00
|
|
|
VM_UFFD_MISSING);
|
|
|
|
}
|
2017-02-22 23:43:01 +00:00
|
|
|
|
2024-04-15 21:17:47 +00:00
|
|
|
if (!(vma->vm_flags & VM_MAYSHARE)) {
|
|
|
|
ret = vmf_anon_prepare(vmf);
|
|
|
|
if (unlikely(ret))
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2024-04-01 20:26:50 +00:00
|
|
|
folio = alloc_hugetlb_folio(vma, vmf->address, 0);
|
2023-01-25 17:05:33 +00:00
|
|
|
if (IS_ERR(folio)) {
|
hugetlbfs: fix hugetlb page migration/fault race causing SIGBUS
Li Wang discovered that LTP/move_page12 V2 sometimes triggers SIGBUS in
the kernel-v5.2.3 testing. This is caused by a race between hugetlb
page migration and page fault.
If a hugetlb page can not be allocated to satisfy a page fault, the task
is sent SIGBUS. This is normal hugetlbfs behavior. A hugetlb fault
mutex exists to prevent two tasks from trying to instantiate the same
page. This protects against the situation where there is only one
hugetlb page, and both tasks would try to allocate. Without the mutex,
one would fail and SIGBUS even though the other fault would be
successful.
There is a similar race between hugetlb page migration and fault.
Migration code will allocate a page for the target of the migration. It
will then unmap the original page from all page tables. It does this
unmap by first clearing the pte and then writing a migration entry. The
page table lock is held for the duration of this clear and write
operation. However, the beginnings of the hugetlb page fault code
optimistically checks the pte without taking the page table lock. If
clear (as it can be during the migration unmap operation), a hugetlb
page allocation is attempted to satisfy the fault. Note that the page
which will eventually satisfy this fault was already allocated by the
migration code. However, the allocation within the fault path could
fail which would result in the task incorrectly being sent SIGBUS.
Ideally, we could take the hugetlb fault mutex in the migration code
when modifying the page tables. However, locks must be taken in the
order of hugetlb fault mutex, page lock, page table lock. This would
require significant rework of the migration code. Instead, the issue is
addressed in the hugetlb fault code. After failing to allocate a huge
page, take the page table lock and check for huge_pte_none before
returning an error. This is the same check that must be made further in
the code even if page allocation is successful.
Link: http://lkml.kernel.org/r/20190808000533.7701-1-mike.kravetz@oracle.com
Fixes: 290408d4a250 ("hugetlb: hugepage migration core")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 22:38:00 +00:00
|
|
|
/*
|
|
|
|
* Returning error will result in faulting task being
|
|
|
|
* sent SIGBUS. The hugetlb fault mutex prevents two
|
|
|
|
* tasks from racing to fault in the same page which
|
|
|
|
* could result in false unable to allocate errors.
|
|
|
|
* Page migration does not take the fault mutex, but
|
|
|
|
* does a clear then write of pte's under page table
|
|
|
|
* lock. Page fault code could race with migration,
|
|
|
|
* notice the clear pte and try to allocate a page
|
|
|
|
* here. Before returning error, get ptl and make
|
|
|
|
* sure there really is no pte entry.
|
|
|
|
*/
|
2024-07-02 13:51:20 +00:00
|
|
|
if (hugetlb_pte_stable(h, mm, vmf->address, vmf->pte, vmf->orig_pte))
|
2023-01-25 17:05:33 +00:00
|
|
|
ret = vmf_error(PTR_ERR(folio));
|
2022-10-04 19:33:59 +00:00
|
|
|
else
|
|
|
|
ret = 0;
|
2006-01-06 08:10:49 +00:00
|
|
|
goto out;
|
|
|
|
}
|
2024-06-18 09:12:39 +00:00
|
|
|
folio_zero_user(folio, vmf->real_address);
|
2023-01-25 17:05:33 +00:00
|
|
|
__folio_mark_uptodate(folio);
|
|
|
|
new_folio = true;
|
2005-10-20 15:24:28 +00:00
|
|
|
|
2009-05-28 21:34:40 +00:00
|
|
|
if (vma->vm_flags & VM_MAYSHARE) {
|
2024-04-01 20:26:50 +00:00
|
|
|
int err = hugetlb_add_to_page_cache(folio, mapping,
|
|
|
|
vmf->pgoff);
|
2006-01-06 08:10:49 +00:00
|
|
|
if (err) {
|
2022-08-16 13:05:50 +00:00
|
|
|
/*
|
|
|
|
* err can't be -EEXIST which implies someone
|
|
|
|
* else consumed the reservation since hugetlb
|
|
|
|
* fault mutex is held when add a hugetlb page
|
|
|
|
* to the page cache. So it's safe to call
|
|
|
|
* restore_reserve_on_error() here.
|
|
|
|
*/
|
2024-04-01 20:26:50 +00:00
|
|
|
restore_reserve_on_error(h, vma, vmf->address,
|
|
|
|
folio);
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_put(folio);
|
2024-04-15 21:17:47 +00:00
|
|
|
ret = VM_FAULT_SIGBUS;
|
2006-01-06 08:10:49 +00:00
|
|
|
goto out;
|
|
|
|
}
|
2023-01-25 17:05:33 +00:00
|
|
|
new_pagecache_folio = true;
|
2010-04-23 17:17:56 +00:00
|
|
|
} else {
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_lock(folio);
|
2012-01-20 22:34:13 +00:00
|
|
|
anon_rmap = 1;
|
2010-04-23 17:17:56 +00:00
|
|
|
}
|
2010-05-28 00:29:16 +00:00
|
|
|
} else {
|
2010-09-08 01:19:32 +00:00
|
|
|
/*
|
|
|
|
* If memory error occurs between mmap() and fault, some process
|
|
|
|
* don't have hwpoisoned swap entry for errored virtual address.
|
|
|
|
* So we need to block hugepage fault by PG_hwpoison bit check.
|
|
|
|
*/
|
2023-01-25 17:05:33 +00:00
|
|
|
if (unlikely(folio_test_hwpoison(folio))) {
|
2021-01-12 23:49:24 +00:00
|
|
|
ret = VM_FAULT_HWPOISON_LARGE |
|
2012-07-31 23:42:00 +00:00
|
|
|
VM_FAULT_SET_HINDEX(hstate_index(h));
|
2010-09-08 01:19:32 +00:00
|
|
|
goto backout_unlocked;
|
|
|
|
}
|
userfaultfd: add minor fault registration mode
Patch series "userfaultfd: add minor fault handling", v9.
Overview
========
This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults. By "minor" fault, I mean the following
situation:
Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory). One of the mappings is registered with userfaultfd (in minor
mode), and the other is not. Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents. The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault. As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.
We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...). In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".
Use Case
========
Consider the use case of VM live migration (e.g. under QEMU/KVM):
1. While a VM is still running, we copy the contents of its memory to a
target machine. The pages are populated on the target by writing to the
non-UFFD mapping, using the setup described above. The VM is still running
(and therefore its memory is likely changing), so this may be repeated
several times, until we decide the target is "up to date enough".
2. We pause the VM on the source, and start executing on the target machine.
During this gap, the VM's user(s) will *see* a pause, so it is desirable to
minimize this window.
3. Between the last time any page was copied from the source to the target, and
when the VM was paused, the contents of that page may have changed - and
therefore the copy we have on the target machine is out of date. Although we
can keep track of which pages are out of date, for VMs with large amounts of
memory, it is "slow" to transfer this information to the target machine. We
want to resume execution before such a transfer would complete.
4. So, the guest begins executing on the target machine. The first time it
touches its memory (via the UFFD-registered mapping), userspace wants to
intercept this fault. Userspace checks whether or not the page is up to date,
and if not, copies the updated page from the source machine, via the non-UFFD
mapping. Finally, whether a copy was performed or not, userspace issues a
UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
are correct, carry on setting up the mapping".
We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.
Interaction with Existing APIs
==============================
Because this is a feature, a registered VMA could potentially receive both
missing and minor faults. I spent some time thinking through how the
existing API interacts with the new feature:
UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault:
- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.
UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated. This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).
- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
-ENOENT in that case (regardless of the kind of fault).
Future Work
===========
This series only supports hugetlbfs. I have a second series in flight to
support shmem as well, extending the functionality. This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.
This patch (of 6):
This feature allows userspace to intercept "minor" faults. By "minor"
faults, I mean the following situation:
Let there exist two mappings (i.e., VMAs) to the same page(s). One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not. Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents. The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault. As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.
This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered. In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.
This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].
However, doing it this was requires we allocate a VM_* flag for the new
registration mode. On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.
[1] https://lore.kernel.org/patchwork/patch/1380226/
[peterx@redhat.com: fix minor fault page leak]
Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:36 +00:00
|
|
|
|
|
|
|
/* Check for page in userfault range. */
|
|
|
|
if (userfaultfd_minor(vma)) {
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_unlock(folio);
|
|
|
|
folio_put(folio);
|
mm/hugetlb: fix race condition of uffd missing/minor handling
Patch series "mm/hugetlb: Fix selftest failures with write check", v3.
Currently akpm mm-unstable fails with uffd hugetlb private mapping test
randomly on a write check.
The initial bisection of that points to the recent pmd unshare series, but
it turns out there's no direction relationship with the series but only
some timing change caused the race to start trigger.
The race should be fixed in patch 1. Patch 2 is a trivial cleanup on the
similar race with hugetlb migrations, patch 3 comment on the write check
so when anyone read it again it'll be clear why it's there.
This patch (of 3):
After the recent rework patchset of hugetlb locking on pmd sharing,
kselftest for userfaultfd sometimes fails on hugetlb private tests with
unexpected write fault checks.
It turns out there's nothing wrong within the locking series regarding
this matter, but it could have changed the timing of threads so it can
trigger an old bug.
The real bug is when we call hugetlb_no_page() we're not with the pgtable
lock. It means we're reading the pte values lockless. It's perfectly
fine in most cases because before we do normal page allocations we'll take
the lock and check pte_same() again. However before that, there are
actually two paths on userfaultfd missing/minor handling that may directly
move on with the fault process without checking the pte values.
It means for these two paths we may be generating an uffd message based on
an unstable pte, while an unstable pte can legally be anything as long as
the modifier holds the pgtable lock.
One example, which is also what happened in the failing kselftest and
caused the test failure, is that for private mappings wr-protection
changes can happen on one page. While hugetlb_change_protection()
generally requires pte being cleared before being changed, then there can
be a race condition like:
thread 1 thread 2
-------- --------
UFFDIO_WRITEPROTECT hugetlb_fault
hugetlb_change_protection
pgtable_lock()
huge_ptep_modify_prot_start
pte==NULL
hugetlb_no_page
generate uffd missing event
even if page existed!!
huge_ptep_modify_prot_commit
pgtable_unlock()
Fix this by rechecking the pte after pgtable lock for both userfaultfd
missing & minor fault paths.
This bug should have been around starting from uffd hugetlb introduced, so
attaching a Fixes to the commit. Also attach another Fixes to the minor
support commit for easier tracking.
Note that userfaultfd is actually fine with false positives (e.g. caused
by pte changed), but not wrong logical events (e.g. caused by reading a
pte during changing). The latter can confuse the userspace, so the
strictness is very much preferred. E.g., MISSING event should never
happen on the page after UFFDIO_COPY has correctly installed the page and
returned.
Link: https://lkml.kernel.org/r/20221004193400.110155-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221004193400.110155-2-peterx@redhat.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04 19:33:58 +00:00
|
|
|
/* See comment in userfaultfd_missing() block above */
|
2024-07-02 13:51:20 +00:00
|
|
|
if (!hugetlb_pte_stable(h, mm, vmf->address, vmf->pte, vmf->orig_pte)) {
|
mm/hugetlb: fix race condition of uffd missing/minor handling
Patch series "mm/hugetlb: Fix selftest failures with write check", v3.
Currently akpm mm-unstable fails with uffd hugetlb private mapping test
randomly on a write check.
The initial bisection of that points to the recent pmd unshare series, but
it turns out there's no direction relationship with the series but only
some timing change caused the race to start trigger.
The race should be fixed in patch 1. Patch 2 is a trivial cleanup on the
similar race with hugetlb migrations, patch 3 comment on the write check
so when anyone read it again it'll be clear why it's there.
This patch (of 3):
After the recent rework patchset of hugetlb locking on pmd sharing,
kselftest for userfaultfd sometimes fails on hugetlb private tests with
unexpected write fault checks.
It turns out there's nothing wrong within the locking series regarding
this matter, but it could have changed the timing of threads so it can
trigger an old bug.
The real bug is when we call hugetlb_no_page() we're not with the pgtable
lock. It means we're reading the pte values lockless. It's perfectly
fine in most cases because before we do normal page allocations we'll take
the lock and check pte_same() again. However before that, there are
actually two paths on userfaultfd missing/minor handling that may directly
move on with the fault process without checking the pte values.
It means for these two paths we may be generating an uffd message based on
an unstable pte, while an unstable pte can legally be anything as long as
the modifier holds the pgtable lock.
One example, which is also what happened in the failing kselftest and
caused the test failure, is that for private mappings wr-protection
changes can happen on one page. While hugetlb_change_protection()
generally requires pte being cleared before being changed, then there can
be a race condition like:
thread 1 thread 2
-------- --------
UFFDIO_WRITEPROTECT hugetlb_fault
hugetlb_change_protection
pgtable_lock()
huge_ptep_modify_prot_start
pte==NULL
hugetlb_no_page
generate uffd missing event
even if page existed!!
huge_ptep_modify_prot_commit
pgtable_unlock()
Fix this by rechecking the pte after pgtable lock for both userfaultfd
missing & minor fault paths.
This bug should have been around starting from uffd hugetlb introduced, so
attaching a Fixes to the commit. Also attach another Fixes to the minor
support commit for easier tracking.
Note that userfaultfd is actually fine with false positives (e.g. caused
by pte changed), but not wrong logical events (e.g. caused by reading a
pte during changing). The latter can confuse the userspace, so the
strictness is very much preferred. E.g., MISSING event should never
happen on the page after UFFDIO_COPY has correctly installed the page and
returned.
Link: https://lkml.kernel.org/r/20221004193400.110155-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221004193400.110155-2-peterx@redhat.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04 19:33:58 +00:00
|
|
|
ret = 0;
|
|
|
|
goto out;
|
|
|
|
}
|
2024-02-21 23:47:30 +00:00
|
|
|
return hugetlb_handle_userfault(vmf, mapping,
|
mm/hugetlb: fix race condition of uffd missing/minor handling
Patch series "mm/hugetlb: Fix selftest failures with write check", v3.
Currently akpm mm-unstable fails with uffd hugetlb private mapping test
randomly on a write check.
The initial bisection of that points to the recent pmd unshare series, but
it turns out there's no direction relationship with the series but only
some timing change caused the race to start trigger.
The race should be fixed in patch 1. Patch 2 is a trivial cleanup on the
similar race with hugetlb migrations, patch 3 comment on the write check
so when anyone read it again it'll be clear why it's there.
This patch (of 3):
After the recent rework patchset of hugetlb locking on pmd sharing,
kselftest for userfaultfd sometimes fails on hugetlb private tests with
unexpected write fault checks.
It turns out there's nothing wrong within the locking series regarding
this matter, but it could have changed the timing of threads so it can
trigger an old bug.
The real bug is when we call hugetlb_no_page() we're not with the pgtable
lock. It means we're reading the pte values lockless. It's perfectly
fine in most cases because before we do normal page allocations we'll take
the lock and check pte_same() again. However before that, there are
actually two paths on userfaultfd missing/minor handling that may directly
move on with the fault process without checking the pte values.
It means for these two paths we may be generating an uffd message based on
an unstable pte, while an unstable pte can legally be anything as long as
the modifier holds the pgtable lock.
One example, which is also what happened in the failing kselftest and
caused the test failure, is that for private mappings wr-protection
changes can happen on one page. While hugetlb_change_protection()
generally requires pte being cleared before being changed, then there can
be a race condition like:
thread 1 thread 2
-------- --------
UFFDIO_WRITEPROTECT hugetlb_fault
hugetlb_change_protection
pgtable_lock()
huge_ptep_modify_prot_start
pte==NULL
hugetlb_no_page
generate uffd missing event
even if page existed!!
huge_ptep_modify_prot_commit
pgtable_unlock()
Fix this by rechecking the pte after pgtable lock for both userfaultfd
missing & minor fault paths.
This bug should have been around starting from uffd hugetlb introduced, so
attaching a Fixes to the commit. Also attach another Fixes to the minor
support commit for easier tracking.
Note that userfaultfd is actually fine with false positives (e.g. caused
by pte changed), but not wrong logical events (e.g. caused by reading a
pte during changing). The latter can confuse the userspace, so the
strictness is very much preferred. E.g., MISSING event should never
happen on the page after UFFDIO_COPY has correctly installed the page and
returned.
Link: https://lkml.kernel.org/r/20221004193400.110155-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221004193400.110155-2-peterx@redhat.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04 19:33:58 +00:00
|
|
|
VM_UFFD_MINOR);
|
userfaultfd: add minor fault registration mode
Patch series "userfaultfd: add minor fault handling", v9.
Overview
========
This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults. By "minor" fault, I mean the following
situation:
Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory). One of the mappings is registered with userfaultfd (in minor
mode), and the other is not. Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents. The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault. As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.
We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...). In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".
Use Case
========
Consider the use case of VM live migration (e.g. under QEMU/KVM):
1. While a VM is still running, we copy the contents of its memory to a
target machine. The pages are populated on the target by writing to the
non-UFFD mapping, using the setup described above. The VM is still running
(and therefore its memory is likely changing), so this may be repeated
several times, until we decide the target is "up to date enough".
2. We pause the VM on the source, and start executing on the target machine.
During this gap, the VM's user(s) will *see* a pause, so it is desirable to
minimize this window.
3. Between the last time any page was copied from the source to the target, and
when the VM was paused, the contents of that page may have changed - and
therefore the copy we have on the target machine is out of date. Although we
can keep track of which pages are out of date, for VMs with large amounts of
memory, it is "slow" to transfer this information to the target machine. We
want to resume execution before such a transfer would complete.
4. So, the guest begins executing on the target machine. The first time it
touches its memory (via the UFFD-registered mapping), userspace wants to
intercept this fault. Userspace checks whether or not the page is up to date,
and if not, copies the updated page from the source machine, via the non-UFFD
mapping. Finally, whether a copy was performed or not, userspace issues a
UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
are correct, carry on setting up the mapping".
We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.
Interaction with Existing APIs
==============================
Because this is a feature, a registered VMA could potentially receive both
missing and minor faults. I spent some time thinking through how the
existing API interacts with the new feature:
UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault:
- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.
UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated. This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).
- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
-ENOENT in that case (regardless of the kind of fault).
Future Work
===========
This series only supports hugetlbfs. I have a second series in flight to
support shmem as well, extending the functionality. This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.
This patch (of 6):
This feature allows userspace to intercept "minor" faults. By "minor"
faults, I mean the following situation:
Let there exist two mappings (i.e., VMAs) to the same page(s). One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not. Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents. The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault. As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.
This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered. In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.
This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].
However, doing it this was requires we allocate a VM_* flag for the new
registration mode. On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.
[1] https://lore.kernel.org/patchwork/patch/1380226/
[peterx@redhat.com: fix minor fault page leak]
Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:36 +00:00
|
|
|
}
|
2006-01-06 08:10:49 +00:00
|
|
|
}
|
2006-01-06 08:10:44 +00:00
|
|
|
|
2008-08-12 22:08:47 +00:00
|
|
|
/*
|
|
|
|
* If we are going to COW a private mapping later, we examine the
|
|
|
|
* pending reservations for this page now. This will ensure that
|
|
|
|
* any allocations necessary to record that reservation occur outside
|
|
|
|
* the spinlock.
|
|
|
|
*/
|
2024-04-01 20:26:50 +00:00
|
|
|
if ((vmf->flags & FAULT_FLAG_WRITE) && !(vma->vm_flags & VM_SHARED)) {
|
|
|
|
if (vma_needs_reservation(h, vma, vmf->address) < 0) {
|
2008-08-12 22:08:49 +00:00
|
|
|
ret = VM_FAULT_OOM;
|
|
|
|
goto backout_unlocked;
|
|
|
|
}
|
2015-09-08 22:01:28 +00:00
|
|
|
/* Just decrements count, does not deallocate */
|
2024-04-01 20:26:50 +00:00
|
|
|
vma_end_reservation(h, vma, vmf->address);
|
2015-09-08 22:01:28 +00:00
|
|
|
}
|
2008-08-12 22:08:47 +00:00
|
|
|
|
2024-04-01 20:26:50 +00:00
|
|
|
vmf->ptl = huge_pte_lock(h, mm, vmf->pte);
|
2007-07-19 08:47:05 +00:00
|
|
|
ret = 0;
|
2022-05-13 03:22:54 +00:00
|
|
|
/* If pte changed from under us, retry */
|
2024-07-02 13:51:20 +00:00
|
|
|
if (!pte_same(huge_ptep_get(mm, vmf->address, vmf->pte), vmf->orig_pte))
|
2005-10-30 01:16:46 +00:00
|
|
|
goto backout;
|
|
|
|
|
2022-10-20 19:38:32 +00:00
|
|
|
if (anon_rmap)
|
2024-04-01 20:26:50 +00:00
|
|
|
hugetlb_add_new_anon_rmap(folio, vma, vmf->address);
|
2022-10-20 19:38:32 +00:00
|
|
|
else
|
2023-12-20 22:44:27 +00:00
|
|
|
hugetlb_add_file_rmap(folio);
|
2023-01-25 17:05:33 +00:00
|
|
|
new_pte = make_huge_pte(vma, &folio->page, ((vma->vm_flags & VM_WRITE)
|
2006-01-06 08:10:44 +00:00
|
|
|
&& (vma->vm_flags & VM_SHARED)));
|
2022-05-13 03:22:54 +00:00
|
|
|
/*
|
|
|
|
* If this pte was previously wr-protected, keep it wr-protected even
|
|
|
|
* if populated.
|
|
|
|
*/
|
2024-04-01 20:26:50 +00:00
|
|
|
if (unlikely(pte_marker_uffd_wp(vmf->orig_pte)))
|
2022-12-14 20:15:33 +00:00
|
|
|
new_pte = huge_pte_mkuffd_wp(new_pte);
|
2024-04-01 20:26:50 +00:00
|
|
|
set_huge_pte_at(mm, vmf->address, vmf->pte, new_pte, huge_page_size(h));
|
2006-01-06 08:10:44 +00:00
|
|
|
|
2015-11-06 02:47:14 +00:00
|
|
|
hugetlb_count_add(pages_per_huge_page(h), mm);
|
2024-04-01 20:26:50 +00:00
|
|
|
if ((vmf->flags & FAULT_FLAG_WRITE) && !(vma->vm_flags & VM_SHARED)) {
|
2006-01-06 08:10:44 +00:00
|
|
|
/* Optimization, do the COW without a second fault */
|
2024-04-01 20:26:51 +00:00
|
|
|
ret = hugetlb_wp(folio, vmf);
|
2006-01-06 08:10:44 +00:00
|
|
|
}
|
|
|
|
|
2024-04-01 20:26:50 +00:00
|
|
|
spin_unlock(vmf->ptl);
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 00:22:02 +00:00
|
|
|
|
|
|
|
/*
|
2023-01-25 17:05:33 +00:00
|
|
|
* Only set hugetlb_migratable in newly allocated pages. Existing pages
|
|
|
|
* found in the pagecache may not have hugetlb_migratable if they have
|
2021-02-24 20:08:56 +00:00
|
|
|
* been isolated for migration.
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 00:22:02 +00:00
|
|
|
*/
|
2023-01-25 17:05:33 +00:00
|
|
|
if (new_folio)
|
|
|
|
folio_set_hugetlb_migratable(folio);
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 00:22:02 +00:00
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_unlock(folio);
|
2005-10-30 01:16:46 +00:00
|
|
|
out:
|
2022-09-23 04:21:13 +00:00
|
|
|
hugetlb_vma_unlock_read(vma);
|
|
|
|
mutex_unlock(&hugetlb_fault_mutex_table[hash]);
|
2005-10-20 15:24:28 +00:00
|
|
|
return ret;
|
2005-10-30 01:16:46 +00:00
|
|
|
|
|
|
|
backout:
|
2024-04-01 20:26:50 +00:00
|
|
|
spin_unlock(vmf->ptl);
|
2008-08-12 22:08:49 +00:00
|
|
|
backout_unlocked:
|
2023-01-25 17:05:33 +00:00
|
|
|
if (new_folio && !new_pagecache_folio)
|
2024-04-01 20:26:50 +00:00
|
|
|
restore_reserve_on_error(h, vma, vmf->address, folio);
|
2022-09-14 22:18:10 +00:00
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_unlock(folio);
|
|
|
|
folio_put(folio);
|
2005-10-30 01:16:46 +00:00
|
|
|
goto out;
|
2005-10-20 15:24:28 +00:00
|
|
|
}
|
|
|
|
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
#ifdef CONFIG_SMP
|
2019-12-01 01:57:02 +00:00
|
|
|
u32 hugetlb_fault_mutex_hash(struct address_space *mapping, pgoff_t idx)
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
{
|
|
|
|
unsigned long key[2];
|
|
|
|
u32 hash;
|
|
|
|
|
2019-05-14 00:19:41 +00:00
|
|
|
key[0] = (unsigned long) mapping;
|
|
|
|
key[1] = idx;
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
|
2019-12-01 01:56:30 +00:00
|
|
|
hash = jhash2((u32 *)&key, sizeof(key)/(sizeof(u32)), 0);
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
|
|
|
|
return hash & (num_fault_mutexes - 1);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
/*
|
2021-02-24 20:07:19 +00:00
|
|
|
* For uniprocessor systems we always use a single mutex, so just
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
* return 0 and avoid the hashing overhead.
|
|
|
|
*/
|
2019-12-01 01:57:02 +00:00
|
|
|
u32 hugetlb_fault_mutex_hash(struct address_space *mapping, pgoff_t idx)
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2018-08-24 00:01:36 +00:00
|
|
|
vm_fault_t hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
|
2009-06-23 12:49:05 +00:00
|
|
|
unsigned long address, unsigned int flags)
|
2006-01-06 08:10:43 +00:00
|
|
|
{
|
2018-08-24 00:01:36 +00:00
|
|
|
vm_fault_t ret;
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
u32 hash;
|
2023-06-06 06:20:13 +00:00
|
|
|
struct folio *folio = NULL;
|
2023-01-25 17:05:36 +00:00
|
|
|
struct folio *pagecache_folio = NULL;
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = hstate_vma(vma);
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
struct address_space *mapping;
|
2015-02-11 23:25:25 +00:00
|
|
|
int need_wait_lock = 0;
|
2024-02-21 23:47:29 +00:00
|
|
|
struct vm_fault vmf = {
|
|
|
|
.vma = vma,
|
2024-04-01 20:26:49 +00:00
|
|
|
.address = address & huge_page_mask(h),
|
2024-02-21 23:47:29 +00:00
|
|
|
.real_address = address,
|
|
|
|
.flags = flags,
|
2024-04-01 20:26:49 +00:00
|
|
|
.pgoff = vma_hugecache_offset(h, vma,
|
|
|
|
address & huge_page_mask(h)),
|
2024-02-21 23:47:29 +00:00
|
|
|
/* TODO: Track hugetlb faults using vm_fault */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Some fields may not be initialized, be careful as it may
|
|
|
|
* be hard to debug if called functions make assumptions
|
|
|
|
*/
|
|
|
|
};
|
2006-01-06 08:10:43 +00:00
|
|
|
|
[PATCH] hugepage: serialize hugepage allocation and instantiation
Currently, no lock or mutex is held between allocating a hugepage and
inserting it into the pagetables / page cache. When we do go to insert the
page into pagetables or page cache, we recheck and may free the newly
allocated hugepage. However, since the number of hugepages in the system
is strictly limited, and it's usualy to want to use all of them, this can
still lead to spurious allocation failures.
For example, suppose two processes are both mapping (MAP_SHARED) the same
hugepage file, large enough to consume the entire available hugepage pool.
If they race instantiating the last page in the mapping, they will both
attempt to allocate the last available hugepage. One will fail, of course,
returning OOM from the fault and thus causing the process to be killed,
despite the fact that the entire mapping can, in fact, be instantiated.
The patch fixes this race by the simple method of adding a (sleeping) mutex
to serialize the hugepage fault path between allocation and insertion into
pagetables and/or page cache. It would be possible to avoid the
serialization by catching the allocation failures, waiting on some
condition, then rechecking to see if someone else has instantiated the page
for us. Given the likely frequency of hugepage instantiations, it seems
very doubtful it's worth the extra complexity.
This patch causes no regression on the libhugetlbfs testsuite, and one
test, which can trigger this race now passes where it previously failed.
Actually, the test still sometimes fails, though less often and only as a
shmat() failure, rather processes getting OOM killed by the VM. The dodgy
heuristic tests in fs/hugetlbfs/inode.c for whether there's enough hugepage
space aren't protected by the new mutex, and would be ugly to do so, so
there's still a race there. Another patch to replace those tests with
something saner for this reason as well as others coming...
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 08:08:53 +00:00
|
|
|
/*
|
|
|
|
* Serialize hugepage allocation and instantiation, so that we don't
|
|
|
|
* get spurious allocation failures if two CPUs race to instantiate
|
|
|
|
* the same page in the page cache.
|
|
|
|
*/
|
2022-09-14 22:18:09 +00:00
|
|
|
mapping = vma->vm_file->f_mapping;
|
2024-02-21 23:47:29 +00:00
|
|
|
hash = hugetlb_fault_mutex_hash(mapping, vmf.pgoff);
|
2015-09-08 22:01:35 +00:00
|
|
|
mutex_lock(&hugetlb_fault_mutex_table[hash]);
|
mm, hugetlb: improve page-fault scalability
The kernel can currently only handle a single hugetlb page fault at a
time. This is due to a single mutex that serializes the entire path.
This lock protects from spurious OOM errors under conditions of low
availability of free hugepages. This problem is specific to hugepages,
because it is normal to want to use every single hugepage in the system
- with normal pages we simply assume there will always be a few spare
pages which can be used temporarily until the race is resolved.
Address this problem by using a table of mutexes, allowing a better
chance of parallelization, where each hugepage is individually
serialized. The hash key is selected depending on the mapping type.
For shared ones it consists of the address space and file offset being
faulted; while for private ones the mm and virtual address are used.
The size of the table is selected based on a compromise of collisions
and memory footprint of a series of database workloads.
Large database workloads that make heavy use of hugepages can be
particularly exposed to this issue, causing start-up times to be
painfully slow. This patch reduces the startup time of a 10 Gb Oracle
DB (with ~5000 faults) from 37.5 secs to 25.7 secs. Larger workloads
will naturally benefit even more.
NOTE:
The only downside to this patch, detected by Joonsoo Kim, is that a
small race is possible in private mappings: A child process (with its
own mm, after cow) can instantiate a page that is already being handled
by the parent in a cow fault. When low on pages, can trigger spurious
OOMs. I have not been able to think of a efficient way of handling
this... but do we really care about such a tiny window? We already
maintain another theoretical race with normal pages. If not, one
possible way to is to maintain the single hash for private mappings --
any workloads that *really* suffer from this scaling problem should
already use shared mappings.
[akpm@linux-foundation.org: remove stray + characters, go BUG if hugetlb_init() kmalloc fails]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:31 +00:00
|
|
|
|
2022-09-14 22:18:09 +00:00
|
|
|
/*
|
|
|
|
* Acquire vma lock before calling huge_pte_alloc and hold
|
2024-04-01 20:26:49 +00:00
|
|
|
* until finished with vmf.pte. This prevents huge_pmd_unshare from
|
|
|
|
* being called elsewhere and making the vmf.pte no longer valid.
|
2022-09-14 22:18:09 +00:00
|
|
|
*/
|
|
|
|
hugetlb_vma_lock_read(vma);
|
2024-04-01 20:26:49 +00:00
|
|
|
vmf.pte = huge_pte_alloc(mm, vma, vmf.address, huge_page_size(h));
|
|
|
|
if (!vmf.pte) {
|
2022-09-14 22:18:09 +00:00
|
|
|
hugetlb_vma_unlock_read(vma);
|
|
|
|
mutex_unlock(&hugetlb_fault_mutex_table[hash]);
|
|
|
|
return VM_FAULT_OOM;
|
|
|
|
}
|
|
|
|
|
2024-07-02 13:51:20 +00:00
|
|
|
vmf.orig_pte = huge_ptep_get(mm, vmf.address, vmf.pte);
|
2024-04-01 20:26:49 +00:00
|
|
|
if (huge_pte_none_mostly(vmf.orig_pte)) {
|
|
|
|
if (is_pte_marker(vmf.orig_pte)) {
|
mm: make PTE_MARKER_SWAPIN_ERROR more general
Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.
This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.
This patch (of 8):
Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:
First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.
Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.
For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.
Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.
Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
|
|
|
pte_marker marker =
|
2024-04-01 20:26:49 +00:00
|
|
|
pte_marker_get(pte_to_swp_entry(vmf.orig_pte));
|
mm: make PTE_MARKER_SWAPIN_ERROR more general
Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.
This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.
This patch (of 8):
Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:
First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.
Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.
For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.
Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.
Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
|
|
|
|
|
|
|
if (marker & PTE_MARKER_POISONED) {
|
2024-05-09 10:01:47 +00:00
|
|
|
ret = VM_FAULT_HWPOISON_LARGE |
|
|
|
|
VM_FAULT_SET_HINDEX(hstate_index(h));
|
mm: make PTE_MARKER_SWAPIN_ERROR more general
Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.
This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.
This patch (of 8):
Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:
First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.
Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.
For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.
Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.
Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
|
|
|
goto out_mutex;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2022-09-23 04:21:13 +00:00
|
|
|
/*
|
mm: make PTE_MARKER_SWAPIN_ERROR more general
Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.
This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.
This patch (of 8):
Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:
First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.
Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.
For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.
Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.
Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
|
|
|
* Other PTE markers should be handled the same way as none PTE.
|
|
|
|
*
|
2022-09-23 04:21:13 +00:00
|
|
|
* hugetlb_no_page will drop vma lock and hugetlb fault
|
|
|
|
* mutex internally, which make us return immediately.
|
|
|
|
*/
|
2024-04-01 20:26:50 +00:00
|
|
|
return hugetlb_no_page(mapping, &vmf);
|
mm: make PTE_MARKER_SWAPIN_ERROR more general
Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.
This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.
This patch (of 8):
Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:
First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.
Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.
For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.
Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.
Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
|
|
|
}
|
2006-01-06 08:10:43 +00:00
|
|
|
|
2007-07-19 08:47:05 +00:00
|
|
|
ret = 0;
|
2006-01-06 08:10:44 +00:00
|
|
|
|
2015-02-11 23:25:25 +00:00
|
|
|
/*
|
2024-04-01 20:26:49 +00:00
|
|
|
* vmf.orig_pte could be a migration/hwpoison vmf.orig_pte at this
|
|
|
|
* point, so this check prevents the kernel from going below assuming
|
|
|
|
* that we have an active hugepage in pagecache. This goto expects
|
|
|
|
* the 2nd page fault, and is_hugetlb_entry_(migration|hwpoisoned)
|
|
|
|
* check will properly handle it.
|
2015-02-11 23:25:25 +00:00
|
|
|
*/
|
2024-04-01 20:26:49 +00:00
|
|
|
if (!pte_present(vmf.orig_pte)) {
|
|
|
|
if (unlikely(is_hugetlb_entry_migration(vmf.orig_pte))) {
|
2022-12-16 15:50:55 +00:00
|
|
|
/*
|
|
|
|
* Release the hugetlb fault lock now, but retain
|
|
|
|
* the vma lock, because it is needed to guard the
|
|
|
|
* huge_pte_lockptr() later in
|
|
|
|
* migration_entry_wait_huge(). The vma lock will
|
|
|
|
* be released there.
|
|
|
|
*/
|
|
|
|
mutex_unlock(&hugetlb_fault_mutex_table[hash]);
|
2024-07-02 13:51:20 +00:00
|
|
|
migration_entry_wait_huge(vma, vmf.address, vmf.pte);
|
2022-12-16 15:50:55 +00:00
|
|
|
return 0;
|
2024-04-01 20:26:49 +00:00
|
|
|
} else if (unlikely(is_hugetlb_entry_hwpoisoned(vmf.orig_pte)))
|
2022-12-16 15:50:55 +00:00
|
|
|
ret = VM_FAULT_HWPOISON_LARGE |
|
|
|
|
VM_FAULT_SET_HINDEX(hstate_index(h));
|
2015-02-11 23:25:25 +00:00
|
|
|
goto out_mutex;
|
2022-12-16 15:50:55 +00:00
|
|
|
}
|
2015-02-11 23:25:25 +00:00
|
|
|
|
2008-08-12 22:08:47 +00:00
|
|
|
/*
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
* If we are going to COW/unshare the mapping later, we examine the
|
|
|
|
* pending reservations for this page now. This will ensure that any
|
2008-08-12 22:08:47 +00:00
|
|
|
* allocations necessary to record that reservation occur outside the
|
mm/hugetlb: support write-faults in shared mappings
If we ever get a write-fault on a write-protected page in a shared
mapping, we'd be in trouble (again). Instead, we can simply map the page
writable.
And in fact, there is even a way right now to trigger that code via
uffd-wp ever since we stared to support it for shmem in 5.19:
--------------------------------------------------------------------------
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/ioctl.h>
#include <linux/userfaultfd.h>
#define HUGETLB_SIZE (2 * 1024 * 1024u)
static char *map;
int uffd;
static int temp_setup_uffd(void)
{
struct uffdio_api uffdio_api;
struct uffdio_register uffdio_register;
struct uffdio_writeprotect uffd_writeprotect;
struct uffdio_range uffd_range;
uffd = syscall(__NR_userfaultfd,
O_CLOEXEC | O_NONBLOCK | UFFD_USER_MODE_ONLY);
if (uffd < 0) {
fprintf(stderr, "syscall() failed: %d\n", errno);
return -errno;
}
uffdio_api.api = UFFD_API;
uffdio_api.features = UFFD_FEATURE_PAGEFAULT_FLAG_WP;
if (ioctl(uffd, UFFDIO_API, &uffdio_api) < 0) {
fprintf(stderr, "UFFDIO_API failed: %d\n", errno);
return -errno;
}
if (!(uffdio_api.features & UFFD_FEATURE_PAGEFAULT_FLAG_WP)) {
fprintf(stderr, "UFFD_FEATURE_WRITEPROTECT missing\n");
return -ENOSYS;
}
/* Register UFFD-WP */
uffdio_register.range.start = (unsigned long) map;
uffdio_register.range.len = HUGETLB_SIZE;
uffdio_register.mode = UFFDIO_REGISTER_MODE_WP;
if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register) < 0) {
fprintf(stderr, "UFFDIO_REGISTER failed: %d\n", errno);
return -errno;
}
/* Writeprotect a single page. */
uffd_writeprotect.range.start = (unsigned long) map;
uffd_writeprotect.range.len = HUGETLB_SIZE;
uffd_writeprotect.mode = UFFDIO_WRITEPROTECT_MODE_WP;
if (ioctl(uffd, UFFDIO_WRITEPROTECT, &uffd_writeprotect)) {
fprintf(stderr, "UFFDIO_WRITEPROTECT failed: %d\n", errno);
return -errno;
}
/* Unregister UFFD-WP without prior writeunprotection. */
uffd_range.start = (unsigned long) map;
uffd_range.len = HUGETLB_SIZE;
if (ioctl(uffd, UFFDIO_UNREGISTER, &uffd_range)) {
fprintf(stderr, "UFFDIO_UNREGISTER failed: %d\n", errno);
return -errno;
}
return 0;
}
int main(int argc, char **argv)
{
int fd;
fd = open("/dev/hugepages/tmp", O_RDWR | O_CREAT);
if (!fd) {
fprintf(stderr, "open() failed\n");
return -errno;
}
if (ftruncate(fd, HUGETLB_SIZE)) {
fprintf(stderr, "ftruncate() failed\n");
return -errno;
}
map = mmap(NULL, HUGETLB_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
if (map == MAP_FAILED) {
fprintf(stderr, "mmap() failed\n");
return -errno;
}
*map = 0;
if (temp_setup_uffd())
return 1;
*map = 0;
return 0;
}
--------------------------------------------------------------------------
Above test fails with SIGBUS when there is only a single free hugetlb page.
# echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# ./test
Bus error (core dumped)
And worse, with sufficient free hugetlb pages it will map an anonymous page
into a shared mapping, for example, messing up accounting during unmap
and breaking MAP_SHARED semantics:
# echo 2 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
# ./test
# cat /proc/meminfo | grep HugePages_
HugePages_Total: 2
HugePages_Free: 1
HugePages_Rsvd: 18446744073709551615
HugePages_Surp: 0
Reason is that uffd-wp doesn't clear the uffd-wp PTE bit when
unregistering and consequently keeps the PTE writeprotected. Reason for
this is to avoid the additional overhead when unregistering. Note that
this is the case also for !hugetlb and that we will end up with writable
PTEs that still have the uffd-wp PTE bit set once we return from
hugetlb_wp(). I'm not touching the uffd-wp PTE bit for now, because it
seems to be a generic thing -- wp_page_reuse() also doesn't clear it.
VM_MAYSHARE handling in hugetlb_fault() for FAULT_FLAG_WRITE indicates
that MAP_SHARED handling was at least envisioned, but could never have
worked as expected.
While at it, make sure that we never end up in hugetlb_wp() on write
faults without VM_WRITE, because we don't support maybe_mkwrite()
semantics as commonly used in the !hugetlb case -- for example, in
wp_page_reuse().
Note that there is no need to do any kind of reservation in
hugetlb_fault() in this case ... because we already have a hugetlb page
mapped R/O that we will simply map writable and we are not dealing with
COW/unsharing.
Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com
Fixes: b1f9e876862d ("mm/uffd: enable write protection for shmem & hugetlbfs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org> [5.19]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 10:34:35 +00:00
|
|
|
* spinlock. Also lookup the pagecache page now as it is used to
|
|
|
|
* determine if a reservation has been consumed.
|
2008-08-12 22:08:47 +00:00
|
|
|
*/
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
if ((flags & (FAULT_FLAG_WRITE|FAULT_FLAG_UNSHARE)) &&
|
2024-04-01 20:26:49 +00:00
|
|
|
!(vma->vm_flags & VM_MAYSHARE) && !huge_pte_write(vmf.orig_pte)) {
|
|
|
|
if (vma_needs_reservation(h, vma, vmf.address) < 0) {
|
2008-08-12 22:08:49 +00:00
|
|
|
ret = VM_FAULT_OOM;
|
2008-10-16 05:01:11 +00:00
|
|
|
goto out_mutex;
|
2008-08-12 22:08:49 +00:00
|
|
|
}
|
2015-09-08 22:01:28 +00:00
|
|
|
/* Just decrements count, does not deallocate */
|
2024-04-01 20:26:49 +00:00
|
|
|
vma_end_reservation(h, vma, vmf.address);
|
2008-08-12 22:08:47 +00:00
|
|
|
|
2024-02-21 23:47:29 +00:00
|
|
|
pagecache_folio = filemap_lock_hugetlb_folio(h, mapping,
|
|
|
|
vmf.pgoff);
|
2023-03-07 14:34:10 +00:00
|
|
|
if (IS_ERR(pagecache_folio))
|
|
|
|
pagecache_folio = NULL;
|
2008-08-12 22:08:47 +00:00
|
|
|
}
|
|
|
|
|
2024-04-01 20:26:49 +00:00
|
|
|
vmf.ptl = huge_pte_lock(h, mm, vmf.pte);
|
2015-02-11 23:25:25 +00:00
|
|
|
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
/* Check for a racing update before calling hugetlb_wp() */
|
2024-07-02 13:51:20 +00:00
|
|
|
if (unlikely(!pte_same(vmf.orig_pte, huge_ptep_get(mm, vmf.address, vmf.pte))))
|
2015-02-11 23:25:25 +00:00
|
|
|
goto out_ptl;
|
|
|
|
|
2022-05-13 03:22:54 +00:00
|
|
|
/* Handle userfault-wp first, before trying to lock more pages */
|
2024-07-02 13:51:20 +00:00
|
|
|
if (userfaultfd_wp(vma) && huge_pte_uffd_wp(huge_ptep_get(mm, vmf.address, vmf.pte)) &&
|
2024-04-01 20:26:49 +00:00
|
|
|
(flags & FAULT_FLAG_WRITE) && !huge_pte_write(vmf.orig_pte)) {
|
userfaultfd: UFFD_FEATURE_WP_ASYNC
Patch series "Implement IOCTL to get and optionally clear info about
PTEs", v33.
*Motivation*
The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows
GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch()
retrieves the addresses of the pages that are written to in a region of
virtual memory.
This syscall is used in Windows applications and games etc. This syscall
is being emulated in pretty slow manner in userspace. Our purpose is to
enhance the kernel such that we translate it efficiently in a better way.
Currently some out of tree hack patches are being used to efficiently
emulate it in some kernels. We intend to replace those with these
patches. So the whole gaming on Linux can effectively get benefit from
this. It means there would be tons of users of this code.
CRIU use case [2] was mentioned by Andrei and Danylo:
> Use cases for migrating sparse VMAs are binaries sanitized with ASAN,
> MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of
> shadow memory [4]. Being able to migrate such binaries allows to highly
> reduce the amount of work needed to identify and fix post-migration
> crashes, which happen constantly.
Andrei defines the following uses of this code:
* it is more granular and allows us to track changed pages more
effectively. The current interface can clear dirty bits for the entire
process only. In addition, reading info about pages is a separate
operation. It means we must freeze the process to read information
about all its pages, reset dirty bits, only then we can start dumping
pages. The information about pages becomes more and more outdated,
while we are processing pages. The new interface solves both these
downsides. First, it allows us to read pte bits and clear the
soft-dirty bit atomically. It means that CRIU will not need to freeze
processes to pre-dump their memory. Second, it clears soft-dirty bits
for a specified region of memory. It means CRIU will have actual info
about pages to the moment of dumping them.
* The new interface has to be much faster because basic page filtering
is happening in the kernel. With the old interface, we have to read
pagemap for each page.
*Implementation Evolution (Short Summary)*
From the definition of GetWriteWatch(), we feel like kernel's soft-dirty
feature can be used under the hood with some additions like:
* reset soft-dirty flag for only a specific region of memory instead of
clearing the flag for the entire process
* get and clear soft-dirty flag for a specific region atomically
So we decided to use ioctl on pagemap file to read or/and reset soft-dirty
flag. But using soft-dirty flag, sometimes we get extra pages which weren't
even written. They had become soft-dirty because of VMA merging and
VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were
able to by-pass this short coming by ignoring VM_SOFTDIRTY until David
reported that mprotect etc messes up the soft-dirty flag while ignoring
VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We
discussed if we can revert these patches. But we could not reach to any
conclusion. So at this point, I made couple of tries to solve this whole
VM_SOFTDIRTY issue by correcting the soft-dirty implementation:
* [7] Correct the bug fixed wrongly back in 2014. It had potential to cause
regression. We left it behind.
* [8] Keep a list of soft-dirty part of a VMA across splits and merges. I
got the reply don't increase the size of the VMA by 8 bytes.
At this point, we left soft-dirty considering it is too much delicate and
userfaultfd [9] seemed like the only way forward. From there onward, we
have been basing soft-dirty emulation on userfaultfd wp feature where
kernel resolves the faults itself when WP_ASYNC feature is used. It was
straight forward to add WP_ASYNC feature in userfautlfd. Now we get only
those pages dirty or written-to which are really written in reality. (PS
There is another WP_UNPOPULATED userfautfd feature is required which is
needed to avoid pre-faulting memory before write-protecting [9].)
All the different masks were added on the request of CRIU devs to create
interface more generic and better.
[1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch
[2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com
[3] https://github.com/google/sanitizers
[4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit
[5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com
[6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/
[7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com
[8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com
[9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com
[10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com
This patch (of 6):
Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows
userfaultfd wr-protect faults to be resolved by the kernel directly.
It can be used like a high accuracy version of soft-dirty, without vma
modifications during tracking, and also with ranged support by default
rather than for a whole mm when reset the protections due to existence of
ioctl(UFFDIO_WRITEPROTECT).
Several goals of such a dirty tracking interface:
1. All types of memory should be supported and tracable. This is nature
for soft-dirty but should mention when the context is userfaultfd,
because it used to only support anon/shmem/hugetlb. The problem is for
a dirty tracking purpose these three types may not be enough, and it's
legal to track anything e.g. any page cache writes from mmap.
2. Protections can be applied to partial of a memory range, without vma
split/merge fuss. The hope is that the tracking itself should not
affect any vma layout change. It also helps when reset happens because
the reset will not need mmap write lock which can block the tracee.
3. Accuracy needs to be maintained. This means we need pte markers to work
on any type of VMA.
One could question that, the whole concept of async dirty tracking is not
really close to fundamentally what userfaultfd used to be: it's not "a
fault to be serviced by userspace" anymore. However, using userfaultfd-wp
here as a framework is convenient for us in at least:
1. VM_UFFD_WP vma flag, which has a very good name to suite something like
this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new
feature bit to identify from a sync version of uffd-wp registration.
2. PTE markers logic can be leveraged across the whole kernel to maintain
the uffd-wp bit as long as an arch supports, this also applies to this
case where uffd-wp bit will be a hint to dirty information and it will
not go lost easily (e.g. when some page cache ptes got zapped).
3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or
resetting a range of memory, while there's no counterpart in the old
soft-dirty world, hence if this is wanted in a new design we'll need a
new interface otherwise.
We can somehow understand that commonality because uffd-wp was
fundamentally a similar idea of write-protecting pages just like
soft-dirty.
This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so
far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also
gives us chance to modify impl of WP_ASYNC just in case it could be not
depending on WP_UNPOPULATED anymore in the future kernels. It's also fine
to imply that because both features will rely on PTE_MARKER_UFFD_WP config
option, so they'll show up together (or both missing) in an UFFDIO_API
probe.
vma_can_userfault() now allows any VMA if the userfaultfd registration is
only about async uffd-wp. So we can track dirty for all kinds of memory
including generic file systems (like XFS, EXT4 or BTRFS).
One trick worth mention in do_wp_page() is that we need to manually update
vmf->orig_pte here because it can be used later with a pte_same() check -
this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags.
The major defect of this approach of dirty tracking is we need to populate
the pgtables when tracking starts. Soft-dirty doesn't do it like that.
It's unwanted in the case where the range of memory to track is huge and
unpopulated (e.g., tracking updates on a 10G file with mmap() on top,
without having any page cache installed yet). One way to improve this is
to allow pte markers exist for larger than PTE level for PMD+. That will
not change the interface if to implemented, so we can leave that for
later.
Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
|
|
|
if (!userfaultfd_wp_async(vma)) {
|
2024-04-01 20:26:49 +00:00
|
|
|
spin_unlock(vmf.ptl);
|
userfaultfd: UFFD_FEATURE_WP_ASYNC
Patch series "Implement IOCTL to get and optionally clear info about
PTEs", v33.
*Motivation*
The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows
GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch()
retrieves the addresses of the pages that are written to in a region of
virtual memory.
This syscall is used in Windows applications and games etc. This syscall
is being emulated in pretty slow manner in userspace. Our purpose is to
enhance the kernel such that we translate it efficiently in a better way.
Currently some out of tree hack patches are being used to efficiently
emulate it in some kernels. We intend to replace those with these
patches. So the whole gaming on Linux can effectively get benefit from
this. It means there would be tons of users of this code.
CRIU use case [2] was mentioned by Andrei and Danylo:
> Use cases for migrating sparse VMAs are binaries sanitized with ASAN,
> MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of
> shadow memory [4]. Being able to migrate such binaries allows to highly
> reduce the amount of work needed to identify and fix post-migration
> crashes, which happen constantly.
Andrei defines the following uses of this code:
* it is more granular and allows us to track changed pages more
effectively. The current interface can clear dirty bits for the entire
process only. In addition, reading info about pages is a separate
operation. It means we must freeze the process to read information
about all its pages, reset dirty bits, only then we can start dumping
pages. The information about pages becomes more and more outdated,
while we are processing pages. The new interface solves both these
downsides. First, it allows us to read pte bits and clear the
soft-dirty bit atomically. It means that CRIU will not need to freeze
processes to pre-dump their memory. Second, it clears soft-dirty bits
for a specified region of memory. It means CRIU will have actual info
about pages to the moment of dumping them.
* The new interface has to be much faster because basic page filtering
is happening in the kernel. With the old interface, we have to read
pagemap for each page.
*Implementation Evolution (Short Summary)*
From the definition of GetWriteWatch(), we feel like kernel's soft-dirty
feature can be used under the hood with some additions like:
* reset soft-dirty flag for only a specific region of memory instead of
clearing the flag for the entire process
* get and clear soft-dirty flag for a specific region atomically
So we decided to use ioctl on pagemap file to read or/and reset soft-dirty
flag. But using soft-dirty flag, sometimes we get extra pages which weren't
even written. They had become soft-dirty because of VMA merging and
VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were
able to by-pass this short coming by ignoring VM_SOFTDIRTY until David
reported that mprotect etc messes up the soft-dirty flag while ignoring
VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We
discussed if we can revert these patches. But we could not reach to any
conclusion. So at this point, I made couple of tries to solve this whole
VM_SOFTDIRTY issue by correcting the soft-dirty implementation:
* [7] Correct the bug fixed wrongly back in 2014. It had potential to cause
regression. We left it behind.
* [8] Keep a list of soft-dirty part of a VMA across splits and merges. I
got the reply don't increase the size of the VMA by 8 bytes.
At this point, we left soft-dirty considering it is too much delicate and
userfaultfd [9] seemed like the only way forward. From there onward, we
have been basing soft-dirty emulation on userfaultfd wp feature where
kernel resolves the faults itself when WP_ASYNC feature is used. It was
straight forward to add WP_ASYNC feature in userfautlfd. Now we get only
those pages dirty or written-to which are really written in reality. (PS
There is another WP_UNPOPULATED userfautfd feature is required which is
needed to avoid pre-faulting memory before write-protecting [9].)
All the different masks were added on the request of CRIU devs to create
interface more generic and better.
[1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch
[2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com
[3] https://github.com/google/sanitizers
[4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit
[5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com
[6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/
[7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com
[8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com
[9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com
[10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com
This patch (of 6):
Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows
userfaultfd wr-protect faults to be resolved by the kernel directly.
It can be used like a high accuracy version of soft-dirty, without vma
modifications during tracking, and also with ranged support by default
rather than for a whole mm when reset the protections due to existence of
ioctl(UFFDIO_WRITEPROTECT).
Several goals of such a dirty tracking interface:
1. All types of memory should be supported and tracable. This is nature
for soft-dirty but should mention when the context is userfaultfd,
because it used to only support anon/shmem/hugetlb. The problem is for
a dirty tracking purpose these three types may not be enough, and it's
legal to track anything e.g. any page cache writes from mmap.
2. Protections can be applied to partial of a memory range, without vma
split/merge fuss. The hope is that the tracking itself should not
affect any vma layout change. It also helps when reset happens because
the reset will not need mmap write lock which can block the tracee.
3. Accuracy needs to be maintained. This means we need pte markers to work
on any type of VMA.
One could question that, the whole concept of async dirty tracking is not
really close to fundamentally what userfaultfd used to be: it's not "a
fault to be serviced by userspace" anymore. However, using userfaultfd-wp
here as a framework is convenient for us in at least:
1. VM_UFFD_WP vma flag, which has a very good name to suite something like
this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new
feature bit to identify from a sync version of uffd-wp registration.
2. PTE markers logic can be leveraged across the whole kernel to maintain
the uffd-wp bit as long as an arch supports, this also applies to this
case where uffd-wp bit will be a hint to dirty information and it will
not go lost easily (e.g. when some page cache ptes got zapped).
3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or
resetting a range of memory, while there's no counterpart in the old
soft-dirty world, hence if this is wanted in a new design we'll need a
new interface otherwise.
We can somehow understand that commonality because uffd-wp was
fundamentally a similar idea of write-protecting pages just like
soft-dirty.
This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so
far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also
gives us chance to modify impl of WP_ASYNC just in case it could be not
depending on WP_UNPOPULATED anymore in the future kernels. It's also fine
to imply that because both features will rely on PTE_MARKER_UFFD_WP config
option, so they'll show up together (or both missing) in an UFFDIO_API
probe.
vma_can_userfault() now allows any VMA if the userfaultfd registration is
only about async uffd-wp. So we can track dirty for all kinds of memory
including generic file systems (like XFS, EXT4 or BTRFS).
One trick worth mention in do_wp_page() is that we need to manually update
vmf->orig_pte here because it can be used later with a pte_same() check -
this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags.
The major defect of this approach of dirty tracking is we need to populate
the pgtables when tracking starts. Soft-dirty doesn't do it like that.
It's unwanted in the case where the range of memory to track is huge and
unpopulated (e.g., tracking updates on a 10G file with mmap() on top,
without having any page cache installed yet). One way to improve this is
to allow pte markers exist for larger than PTE level for PMD+. That will
not change the interface if to implemented, so we can leave that for
later.
Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
|
|
|
if (pagecache_folio) {
|
|
|
|
folio_unlock(pagecache_folio);
|
|
|
|
folio_put(pagecache_folio);
|
|
|
|
}
|
|
|
|
hugetlb_vma_unlock_read(vma);
|
|
|
|
mutex_unlock(&hugetlb_fault_mutex_table[hash]);
|
|
|
|
return handle_userfault(&vmf, VM_UFFD_WP);
|
2022-05-13 03:22:54 +00:00
|
|
|
}
|
userfaultfd: UFFD_FEATURE_WP_ASYNC
Patch series "Implement IOCTL to get and optionally clear info about
PTEs", v33.
*Motivation*
The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows
GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch()
retrieves the addresses of the pages that are written to in a region of
virtual memory.
This syscall is used in Windows applications and games etc. This syscall
is being emulated in pretty slow manner in userspace. Our purpose is to
enhance the kernel such that we translate it efficiently in a better way.
Currently some out of tree hack patches are being used to efficiently
emulate it in some kernels. We intend to replace those with these
patches. So the whole gaming on Linux can effectively get benefit from
this. It means there would be tons of users of this code.
CRIU use case [2] was mentioned by Andrei and Danylo:
> Use cases for migrating sparse VMAs are binaries sanitized with ASAN,
> MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of
> shadow memory [4]. Being able to migrate such binaries allows to highly
> reduce the amount of work needed to identify and fix post-migration
> crashes, which happen constantly.
Andrei defines the following uses of this code:
* it is more granular and allows us to track changed pages more
effectively. The current interface can clear dirty bits for the entire
process only. In addition, reading info about pages is a separate
operation. It means we must freeze the process to read information
about all its pages, reset dirty bits, only then we can start dumping
pages. The information about pages becomes more and more outdated,
while we are processing pages. The new interface solves both these
downsides. First, it allows us to read pte bits and clear the
soft-dirty bit atomically. It means that CRIU will not need to freeze
processes to pre-dump their memory. Second, it clears soft-dirty bits
for a specified region of memory. It means CRIU will have actual info
about pages to the moment of dumping them.
* The new interface has to be much faster because basic page filtering
is happening in the kernel. With the old interface, we have to read
pagemap for each page.
*Implementation Evolution (Short Summary)*
From the definition of GetWriteWatch(), we feel like kernel's soft-dirty
feature can be used under the hood with some additions like:
* reset soft-dirty flag for only a specific region of memory instead of
clearing the flag for the entire process
* get and clear soft-dirty flag for a specific region atomically
So we decided to use ioctl on pagemap file to read or/and reset soft-dirty
flag. But using soft-dirty flag, sometimes we get extra pages which weren't
even written. They had become soft-dirty because of VMA merging and
VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were
able to by-pass this short coming by ignoring VM_SOFTDIRTY until David
reported that mprotect etc messes up the soft-dirty flag while ignoring
VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We
discussed if we can revert these patches. But we could not reach to any
conclusion. So at this point, I made couple of tries to solve this whole
VM_SOFTDIRTY issue by correcting the soft-dirty implementation:
* [7] Correct the bug fixed wrongly back in 2014. It had potential to cause
regression. We left it behind.
* [8] Keep a list of soft-dirty part of a VMA across splits and merges. I
got the reply don't increase the size of the VMA by 8 bytes.
At this point, we left soft-dirty considering it is too much delicate and
userfaultfd [9] seemed like the only way forward. From there onward, we
have been basing soft-dirty emulation on userfaultfd wp feature where
kernel resolves the faults itself when WP_ASYNC feature is used. It was
straight forward to add WP_ASYNC feature in userfautlfd. Now we get only
those pages dirty or written-to which are really written in reality. (PS
There is another WP_UNPOPULATED userfautfd feature is required which is
needed to avoid pre-faulting memory before write-protecting [9].)
All the different masks were added on the request of CRIU devs to create
interface more generic and better.
[1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch
[2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com
[3] https://github.com/google/sanitizers
[4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit
[5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com
[6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/
[7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com
[8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com
[9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com
[10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com
This patch (of 6):
Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows
userfaultfd wr-protect faults to be resolved by the kernel directly.
It can be used like a high accuracy version of soft-dirty, without vma
modifications during tracking, and also with ranged support by default
rather than for a whole mm when reset the protections due to existence of
ioctl(UFFDIO_WRITEPROTECT).
Several goals of such a dirty tracking interface:
1. All types of memory should be supported and tracable. This is nature
for soft-dirty but should mention when the context is userfaultfd,
because it used to only support anon/shmem/hugetlb. The problem is for
a dirty tracking purpose these three types may not be enough, and it's
legal to track anything e.g. any page cache writes from mmap.
2. Protections can be applied to partial of a memory range, without vma
split/merge fuss. The hope is that the tracking itself should not
affect any vma layout change. It also helps when reset happens because
the reset will not need mmap write lock which can block the tracee.
3. Accuracy needs to be maintained. This means we need pte markers to work
on any type of VMA.
One could question that, the whole concept of async dirty tracking is not
really close to fundamentally what userfaultfd used to be: it's not "a
fault to be serviced by userspace" anymore. However, using userfaultfd-wp
here as a framework is convenient for us in at least:
1. VM_UFFD_WP vma flag, which has a very good name to suite something like
this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new
feature bit to identify from a sync version of uffd-wp registration.
2. PTE markers logic can be leveraged across the whole kernel to maintain
the uffd-wp bit as long as an arch supports, this also applies to this
case where uffd-wp bit will be a hint to dirty information and it will
not go lost easily (e.g. when some page cache ptes got zapped).
3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or
resetting a range of memory, while there's no counterpart in the old
soft-dirty world, hence if this is wanted in a new design we'll need a
new interface otherwise.
We can somehow understand that commonality because uffd-wp was
fundamentally a similar idea of write-protecting pages just like
soft-dirty.
This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so
far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also
gives us chance to modify impl of WP_ASYNC just in case it could be not
depending on WP_UNPOPULATED anymore in the future kernels. It's also fine
to imply that because both features will rely on PTE_MARKER_UFFD_WP config
option, so they'll show up together (or both missing) in an UFFDIO_API
probe.
vma_can_userfault() now allows any VMA if the userfaultfd registration is
only about async uffd-wp. So we can track dirty for all kinds of memory
including generic file systems (like XFS, EXT4 or BTRFS).
One trick worth mention in do_wp_page() is that we need to manually update
vmf->orig_pte here because it can be used later with a pte_same() check -
this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags.
The major defect of this approach of dirty tracking is we need to populate
the pgtables when tracking starts. Soft-dirty doesn't do it like that.
It's unwanted in the case where the range of memory to track is huge and
unpopulated (e.g., tracking updates on a 10G file with mmap() on top,
without having any page cache installed yet). One way to improve this is
to allow pte markers exist for larger than PTE level for PMD+. That will
not change the interface if to implemented, so we can leave that for
later.
Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
|
|
|
|
2024-04-01 20:26:49 +00:00
|
|
|
vmf.orig_pte = huge_pte_clear_uffd_wp(vmf.orig_pte);
|
|
|
|
set_huge_pte_at(mm, vmf.address, vmf.pte, vmf.orig_pte,
|
2023-08-21 14:15:14 +00:00
|
|
|
huge_page_size(hstate_vma(vma)));
|
userfaultfd: UFFD_FEATURE_WP_ASYNC
Patch series "Implement IOCTL to get and optionally clear info about
PTEs", v33.
*Motivation*
The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows
GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch()
retrieves the addresses of the pages that are written to in a region of
virtual memory.
This syscall is used in Windows applications and games etc. This syscall
is being emulated in pretty slow manner in userspace. Our purpose is to
enhance the kernel such that we translate it efficiently in a better way.
Currently some out of tree hack patches are being used to efficiently
emulate it in some kernels. We intend to replace those with these
patches. So the whole gaming on Linux can effectively get benefit from
this. It means there would be tons of users of this code.
CRIU use case [2] was mentioned by Andrei and Danylo:
> Use cases for migrating sparse VMAs are binaries sanitized with ASAN,
> MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of
> shadow memory [4]. Being able to migrate such binaries allows to highly
> reduce the amount of work needed to identify and fix post-migration
> crashes, which happen constantly.
Andrei defines the following uses of this code:
* it is more granular and allows us to track changed pages more
effectively. The current interface can clear dirty bits for the entire
process only. In addition, reading info about pages is a separate
operation. It means we must freeze the process to read information
about all its pages, reset dirty bits, only then we can start dumping
pages. The information about pages becomes more and more outdated,
while we are processing pages. The new interface solves both these
downsides. First, it allows us to read pte bits and clear the
soft-dirty bit atomically. It means that CRIU will not need to freeze
processes to pre-dump their memory. Second, it clears soft-dirty bits
for a specified region of memory. It means CRIU will have actual info
about pages to the moment of dumping them.
* The new interface has to be much faster because basic page filtering
is happening in the kernel. With the old interface, we have to read
pagemap for each page.
*Implementation Evolution (Short Summary)*
From the definition of GetWriteWatch(), we feel like kernel's soft-dirty
feature can be used under the hood with some additions like:
* reset soft-dirty flag for only a specific region of memory instead of
clearing the flag for the entire process
* get and clear soft-dirty flag for a specific region atomically
So we decided to use ioctl on pagemap file to read or/and reset soft-dirty
flag. But using soft-dirty flag, sometimes we get extra pages which weren't
even written. They had become soft-dirty because of VMA merging and
VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were
able to by-pass this short coming by ignoring VM_SOFTDIRTY until David
reported that mprotect etc messes up the soft-dirty flag while ignoring
VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We
discussed if we can revert these patches. But we could not reach to any
conclusion. So at this point, I made couple of tries to solve this whole
VM_SOFTDIRTY issue by correcting the soft-dirty implementation:
* [7] Correct the bug fixed wrongly back in 2014. It had potential to cause
regression. We left it behind.
* [8] Keep a list of soft-dirty part of a VMA across splits and merges. I
got the reply don't increase the size of the VMA by 8 bytes.
At this point, we left soft-dirty considering it is too much delicate and
userfaultfd [9] seemed like the only way forward. From there onward, we
have been basing soft-dirty emulation on userfaultfd wp feature where
kernel resolves the faults itself when WP_ASYNC feature is used. It was
straight forward to add WP_ASYNC feature in userfautlfd. Now we get only
those pages dirty or written-to which are really written in reality. (PS
There is another WP_UNPOPULATED userfautfd feature is required which is
needed to avoid pre-faulting memory before write-protecting [9].)
All the different masks were added on the request of CRIU devs to create
interface more generic and better.
[1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch
[2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com
[3] https://github.com/google/sanitizers
[4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit
[5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com
[6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/
[7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com
[8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com
[9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com
[10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com
This patch (of 6):
Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows
userfaultfd wr-protect faults to be resolved by the kernel directly.
It can be used like a high accuracy version of soft-dirty, without vma
modifications during tracking, and also with ranged support by default
rather than for a whole mm when reset the protections due to existence of
ioctl(UFFDIO_WRITEPROTECT).
Several goals of such a dirty tracking interface:
1. All types of memory should be supported and tracable. This is nature
for soft-dirty but should mention when the context is userfaultfd,
because it used to only support anon/shmem/hugetlb. The problem is for
a dirty tracking purpose these three types may not be enough, and it's
legal to track anything e.g. any page cache writes from mmap.
2. Protections can be applied to partial of a memory range, without vma
split/merge fuss. The hope is that the tracking itself should not
affect any vma layout change. It also helps when reset happens because
the reset will not need mmap write lock which can block the tracee.
3. Accuracy needs to be maintained. This means we need pte markers to work
on any type of VMA.
One could question that, the whole concept of async dirty tracking is not
really close to fundamentally what userfaultfd used to be: it's not "a
fault to be serviced by userspace" anymore. However, using userfaultfd-wp
here as a framework is convenient for us in at least:
1. VM_UFFD_WP vma flag, which has a very good name to suite something like
this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new
feature bit to identify from a sync version of uffd-wp registration.
2. PTE markers logic can be leveraged across the whole kernel to maintain
the uffd-wp bit as long as an arch supports, this also applies to this
case where uffd-wp bit will be a hint to dirty information and it will
not go lost easily (e.g. when some page cache ptes got zapped).
3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or
resetting a range of memory, while there's no counterpart in the old
soft-dirty world, hence if this is wanted in a new design we'll need a
new interface otherwise.
We can somehow understand that commonality because uffd-wp was
fundamentally a similar idea of write-protecting pages just like
soft-dirty.
This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so
far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also
gives us chance to modify impl of WP_ASYNC just in case it could be not
depending on WP_UNPOPULATED anymore in the future kernels. It's also fine
to imply that because both features will rely on PTE_MARKER_UFFD_WP config
option, so they'll show up together (or both missing) in an UFFDIO_API
probe.
vma_can_userfault() now allows any VMA if the userfaultfd registration is
only about async uffd-wp. So we can track dirty for all kinds of memory
including generic file systems (like XFS, EXT4 or BTRFS).
One trick worth mention in do_wp_page() is that we need to manually update
vmf->orig_pte here because it can be used later with a pte_same() check -
this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags.
The major defect of this approach of dirty tracking is we need to populate
the pgtables when tracking starts. Soft-dirty doesn't do it like that.
It's unwanted in the case where the range of memory to track is huge and
unpopulated (e.g., tracking updates on a 10G file with mmap() on top,
without having any page cache installed yet). One way to improve this is
to allow pte markers exist for larger than PTE level for PMD+. That will
not change the interface if to implemented, so we can leave that for
later.
Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 14:15:13 +00:00
|
|
|
/* Fallthrough to CoW */
|
2022-05-13 03:22:54 +00:00
|
|
|
}
|
|
|
|
|
2010-09-10 04:23:04 +00:00
|
|
|
/*
|
2024-04-01 20:26:49 +00:00
|
|
|
* hugetlb_wp() requires page locks of pte_page(vmf.orig_pte) and
|
2023-01-25 17:05:36 +00:00
|
|
|
* pagecache_folio, so here we need take the former one
|
2023-06-06 06:20:13 +00:00
|
|
|
* when folio != pagecache_folio or !pagecache_folio.
|
2010-09-10 04:23:04 +00:00
|
|
|
*/
|
2024-04-01 20:26:49 +00:00
|
|
|
folio = page_folio(pte_page(vmf.orig_pte));
|
2023-06-06 06:20:13 +00:00
|
|
|
if (folio != pagecache_folio)
|
|
|
|
if (!folio_trylock(folio)) {
|
2015-02-11 23:25:25 +00:00
|
|
|
need_wait_lock = 1;
|
|
|
|
goto out_ptl;
|
|
|
|
}
|
2008-10-16 05:01:11 +00:00
|
|
|
|
2023-06-06 06:20:13 +00:00
|
|
|
folio_get(folio);
|
2008-10-16 05:01:11 +00:00
|
|
|
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
if (flags & (FAULT_FLAG_WRITE|FAULT_FLAG_UNSHARE)) {
|
2024-04-01 20:26:49 +00:00
|
|
|
if (!huge_pte_write(vmf.orig_pte)) {
|
2024-04-01 20:26:51 +00:00
|
|
|
ret = hugetlb_wp(pagecache_folio, &vmf);
|
2015-02-11 23:25:25 +00:00
|
|
|
goto out_put_page;
|
mm: support GUP-triggered unsharing of anonymous pages
Whenever GUP currently ends up taking a R/O pin on an anonymous page that
might be shared -- mapped R/O and !PageAnonExclusive() -- any write fault
on the page table entry will end up replacing the mapped anonymous page
due to COW, resulting in the GUP pin no longer being consistent with the
page actually mapped into the page table.
The possible ways to deal with this situation are:
(1) Ignore and pin -- what we do right now.
(2) Fail to pin -- which would be rather surprising to callers and
could break user space.
(3) Trigger unsharing and pin the now exclusive page -- reliable R/O
pins.
We want to implement 3) because it provides the clearest semantics and
allows for checking in unpin_user_pages() and friends for possible BUGs:
when trying to unpin a page that's no longer exclusive, clearly something
went very wrong and might result in memory corruptions that might be hard
to debug. So we better have a nice way to spot such issues.
To implement 3), we need a way for GUP to trigger unsharing:
FAULT_FLAG_UNSHARE. FAULT_FLAG_UNSHARE is only applicable to R/O mapped
anonymous pages and resembles COW logic during a write fault. However, in
contrast to a write fault, GUP-triggered unsharing will, for example,
still maintain the write protection.
Let's implement FAULT_FLAG_UNSHARE by hooking into the existing write
fault handlers for all applicable anonymous page types: ordinary pages,
THP and hugetlb.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that has been
marked exclusive in the meantime by someone else, there is nothing to do.
* If FAULT_FLAG_UNSHARE finds a R/O-mapped anonymous page that's not
marked exclusive, it will try detecting if the process is the exclusive
owner. If exclusive, it can be set exclusive similar to reuse logic
during write faults via page_move_anon_rmap() and there is nothing
else to do; otherwise, we either have to copy and map a fresh,
anonymous exclusive page R/O (ordinary pages, hugetlb), or split the
THP.
This commit is heavily based on patches by Andrea.
Link: https://lkml.kernel.org/r/20220428083441.37290-16-david@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
|
|
|
} else if (likely(flags & FAULT_FLAG_WRITE)) {
|
2024-04-01 20:26:49 +00:00
|
|
|
vmf.orig_pte = huge_pte_mkdirty(vmf.orig_pte);
|
2008-10-16 05:01:11 +00:00
|
|
|
}
|
|
|
|
}
|
2024-04-01 20:26:49 +00:00
|
|
|
vmf.orig_pte = pte_mkyoung(vmf.orig_pte);
|
|
|
|
if (huge_ptep_set_access_flags(vma, vmf.address, vmf.pte, vmf.orig_pte,
|
2009-06-23 12:49:05 +00:00
|
|
|
flags & FAULT_FLAG_WRITE))
|
2024-04-01 20:26:49 +00:00
|
|
|
update_mmu_cache(vma, vmf.address, vmf.pte);
|
2015-02-11 23:25:25 +00:00
|
|
|
out_put_page:
|
2023-06-06 06:20:13 +00:00
|
|
|
if (folio != pagecache_folio)
|
|
|
|
folio_unlock(folio);
|
|
|
|
folio_put(folio);
|
2013-11-14 22:31:02 +00:00
|
|
|
out_ptl:
|
2024-04-01 20:26:49 +00:00
|
|
|
spin_unlock(vmf.ptl);
|
2008-08-12 22:08:47 +00:00
|
|
|
|
2023-01-25 17:05:36 +00:00
|
|
|
if (pagecache_folio) {
|
|
|
|
folio_unlock(pagecache_folio);
|
|
|
|
folio_put(pagecache_folio);
|
2008-08-12 22:08:47 +00:00
|
|
|
}
|
2008-10-16 05:01:11 +00:00
|
|
|
out_mutex:
|
2022-09-14 22:18:09 +00:00
|
|
|
hugetlb_vma_unlock_read(vma);
|
2015-09-08 22:01:35 +00:00
|
|
|
mutex_unlock(&hugetlb_fault_mutex_table[hash]);
|
2015-02-11 23:25:25 +00:00
|
|
|
/*
|
|
|
|
* Generally it's safe to hold refcount during waiting page lock. But
|
|
|
|
* here we just wait to defer the next page fault to avoid busy loop and
|
|
|
|
* the page is not used after unlocked before returning from the current
|
|
|
|
* page fault. So we are safe from accessing freed page, even if we wait
|
|
|
|
* here without taking refcount.
|
|
|
|
*/
|
|
|
|
if (need_wait_lock)
|
2023-06-06 06:20:13 +00:00
|
|
|
folio_wait_locked(folio);
|
2006-01-06 08:10:44 +00:00
|
|
|
return ret;
|
2006-01-06 08:10:43 +00:00
|
|
|
}
|
|
|
|
|
2021-05-05 01:35:45 +00:00
|
|
|
#ifdef CONFIG_USERFAULTFD
|
mempolicy: mmap_lock is not needed while migrating folios
mbind(2) holds down_write of current task's mmap_lock throughout
(exclusive because it needs to set the new mempolicy on the vmas);
migrate_pages(2) holds down_read of pid's mmap_lock throughout.
They both hold mmap_lock across the internal migrate_pages(), under which
all new page allocations (huge or small) are made. I'm nervous about it;
and migrate_pages() certainly does not need mmap_lock itself. It's done
this way for mbind(2), because its page allocator is vma_alloc_folio() or
alloc_hugetlb_folio_vma(), both of which depend on vma and address.
Now that we have alloc_pages_mpol(), depending on (refcounted) memory
policy and interleave index, mbind(2) can be modified to use that or
alloc_hugetlb_folio_nodemask(), and then not need mmap_lock across the
internal migrate_pages() at all: add alloc_migration_target_by_mpol() to
replace mbind's new_page().
(After that change, alloc_hugetlb_folio_vma() is used by nothing but a
userfaultfd function: move it out of hugetlb.h and into the #ifdef.)
migrate_pages(2) has chosen its target node before migrating, so can
continue to use the standard alloc_migration_target(); but let it take and
drop mmap_lock just around migrate_to_node()'s queue_pages_range():
neither the node-to-node calculations nor the page migrations need it.
It seems unlikely, but it is conceivable that some userspace depends on
the kernel's mmap_lock exclusion here, instead of doing its own locking:
more likely in a testsuite than in real life. It is also possible, of
course, that some pages on the list will be munmapped by another thread
before they are migrated, or a newer memory policy applied to the range by
that time: but such races could happen before, as soon as mmap_lock was
dropped, so it does not appear to be a concern.
Link: https://lkml.kernel.org/r/21e564e8-269f-6a89-7ee2-fd612831c289@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-03 09:27:47 +00:00
|
|
|
/*
|
|
|
|
* Can probably be eliminated, but still used by hugetlb_mfill_atomic_pte().
|
|
|
|
*/
|
|
|
|
static struct folio *alloc_hugetlb_folio_vma(struct hstate *h,
|
|
|
|
struct vm_area_struct *vma, unsigned long address)
|
|
|
|
{
|
|
|
|
struct mempolicy *mpol;
|
|
|
|
nodemask_t *nodemask;
|
|
|
|
struct folio *folio;
|
|
|
|
gfp_t gfp_mask;
|
|
|
|
int node;
|
|
|
|
|
|
|
|
gfp_mask = htlb_alloc_mask(h);
|
|
|
|
node = huge_node(vma, address, gfp_mask, &mpol, &nodemask);
|
mm: hugetlb: make the hugetlb migration strategy consistent
As discussed in previous thread [1], there is an inconsistency when
handing hugetlb migration. When handling the migration of freed hugetlb,
it prevents fallback to other NUMA nodes in
alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use
hugetlb, it allows fallback to other NUMA nodes in
alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool
and might result in unexpected failures when node bound workloads doesn't
get what is asssumed available.
To make hugetlb migration strategy more clear, we should list all the scenarios
of hugetlb migration and analyze whether allocation fallback is permitted:
1) Memory offline: will call dissolve_free_huge_pages() to free the
freed hugetlb, and call do_migrate_range() to migrate the in-use
hugetlb. Both can break the per-node hugetlb pool, but as this is an
explicit offlining operation, no better choice. So should allow the
hugetlb allocation fallback.
2) Memory failure: same as memory offline. Should allow fallback to a
different node might be the only option to handle it, otherwise the
impact of poisoned memory can be amplified.
3) Longterm pinning: will call migrate_longterm_unpinnable_pages() to
migrate in-use and not-longterm-pinnable hugetlb, which can break the
per-node pool. But we should fail to longterm pinning if can not
allocate on current node to avoid breaking the per-node pool.
4) Syscalls (mbind, migrate_pages, move_pages): these are explicit
users operation to move pages to other nodes, so fallback to other
nodes should not be prohibited.
5) alloc_contig_range: used by CMA allocation and virtio-mem
fake-offline to allocate given range of pages. Now the freed hugetlb
migration is not allowed to fallback, to keep consistency, the in-use
hugetlb migration should be also not allowed to fallback.
6) alloc_contig_pages: used by kfence, pgtable_debug etc. The strategy
should be consistent with that of alloc_contig_range().
Based on the analysis of the various scenarios above, introducing a new
helper to determine whether fallback is permitted according to the
migration reason..
[1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/
Link: https://lkml.kernel.org/r/3519fcd41522817307a05b40fb551e2e17e68101.1709719720.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-06 10:13:27 +00:00
|
|
|
/*
|
|
|
|
* This is used to allocate a temporary hugetlb to hold the copied
|
|
|
|
* content, which will then be copied again to the final hugetlb
|
|
|
|
* consuming a reservation. Set the alloc_fallback to false to indicate
|
|
|
|
* that breaking the per-node hugetlb pool is not allowed in this case.
|
|
|
|
*/
|
|
|
|
folio = alloc_hugetlb_folio_nodemask(h, node, nodemask, gfp_mask, false);
|
mempolicy: mmap_lock is not needed while migrating folios
mbind(2) holds down_write of current task's mmap_lock throughout
(exclusive because it needs to set the new mempolicy on the vmas);
migrate_pages(2) holds down_read of pid's mmap_lock throughout.
They both hold mmap_lock across the internal migrate_pages(), under which
all new page allocations (huge or small) are made. I'm nervous about it;
and migrate_pages() certainly does not need mmap_lock itself. It's done
this way for mbind(2), because its page allocator is vma_alloc_folio() or
alloc_hugetlb_folio_vma(), both of which depend on vma and address.
Now that we have alloc_pages_mpol(), depending on (refcounted) memory
policy and interleave index, mbind(2) can be modified to use that or
alloc_hugetlb_folio_nodemask(), and then not need mmap_lock across the
internal migrate_pages() at all: add alloc_migration_target_by_mpol() to
replace mbind's new_page().
(After that change, alloc_hugetlb_folio_vma() is used by nothing but a
userfaultfd function: move it out of hugetlb.h and into the #ifdef.)
migrate_pages(2) has chosen its target node before migrating, so can
continue to use the standard alloc_migration_target(); but let it take and
drop mmap_lock just around migrate_to_node()'s queue_pages_range():
neither the node-to-node calculations nor the page migrations need it.
It seems unlikely, but it is conceivable that some userspace depends on
the kernel's mmap_lock exclusion here, instead of doing its own locking:
more likely in a testsuite than in real life. It is also possible, of
course, that some pages on the list will be munmapped by another thread
before they are migrated, or a newer memory policy applied to the range by
that time: but such races could happen before, as soon as mmap_lock was
dropped, so it does not appear to be a concern.
Link: https://lkml.kernel.org/r/21e564e8-269f-6a89-7ee2-fd612831c289@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun heo <tj@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-03 09:27:47 +00:00
|
|
|
mpol_cond_put(mpol);
|
|
|
|
|
|
|
|
return folio;
|
|
|
|
}
|
|
|
|
|
2017-02-22 23:42:52 +00:00
|
|
|
/*
|
mm: userfaultfd: rename functions for clarity + consistency
Patch series "mm: userfaultfd: refactor and add UFFDIO_CONTINUE_MODE_WP",
v5.
- Commits 1-3 refactor userfaultfd ioctl code without behavior changes, with the
main goal of improving consistency and reducing the number of function args.
- Commit 4 adds UFFDIO_CONTINUE_MODE_WP.
This patch (of 4):
The basic problem is, over time we've added new userfaultfd ioctls, and
we've refactored the code so functions which used to handle only one case
are now re-used to deal with several cases. While this happened, we
didn't bother to rename the functions.
Similarly, as we added new functions, we cargo-culted pieces of the
now-inconsistent naming scheme, so those functions too ended up with names
that don't make a lot of sense.
A key point here is, "copy" in most userfaultfd code refers specifically
to UFFDIO_COPY, where we allocate a new page and copy its contents from
userspace. There are many functions with "copy" in the name that don't
actually do this (at least in some cases).
So, rename things into a consistent scheme. The high level idea is that
the call stack for userfaultfd ioctls becomes:
userfaultfd_ioctl
-> userfaultfd_(particular ioctl)
-> mfill_atomic_(particular kind of fill operation)
-> mfill_atomic /* loops over pages in range */
-> mfill_atomic_pte /* deals with single pages */
-> mfill_atomic_pte_(particular kind of fill operation)
-> mfill_atomic_install_pte
There are of course some special cases (shmem, hugetlb), but this is the
general structure which all function names now adhere to.
Link: https://lkml.kernel.org/r/20230314221250.682452-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230314221250.682452-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-14 22:12:47 +00:00
|
|
|
* Used by userfaultfd UFFDIO_* ioctls. Based on userfaultfd's mfill_atomic_pte
|
|
|
|
* with modifications for hugetlb pages.
|
2017-02-22 23:42:52 +00:00
|
|
|
*/
|
2023-03-14 22:12:48 +00:00
|
|
|
int hugetlb_mfill_atomic_pte(pte_t *dst_pte,
|
mm: userfaultfd: rename functions for clarity + consistency
Patch series "mm: userfaultfd: refactor and add UFFDIO_CONTINUE_MODE_WP",
v5.
- Commits 1-3 refactor userfaultfd ioctl code without behavior changes, with the
main goal of improving consistency and reducing the number of function args.
- Commit 4 adds UFFDIO_CONTINUE_MODE_WP.
This patch (of 4):
The basic problem is, over time we've added new userfaultfd ioctls, and
we've refactored the code so functions which used to handle only one case
are now re-used to deal with several cases. While this happened, we
didn't bother to rename the functions.
Similarly, as we added new functions, we cargo-culted pieces of the
now-inconsistent naming scheme, so those functions too ended up with names
that don't make a lot of sense.
A key point here is, "copy" in most userfaultfd code refers specifically
to UFFDIO_COPY, where we allocate a new page and copy its contents from
userspace. There are many functions with "copy" in the name that don't
actually do this (at least in some cases).
So, rename things into a consistent scheme. The high level idea is that
the call stack for userfaultfd ioctls becomes:
userfaultfd_ioctl
-> userfaultfd_(particular ioctl)
-> mfill_atomic_(particular kind of fill operation)
-> mfill_atomic /* loops over pages in range */
-> mfill_atomic_pte /* deals with single pages */
-> mfill_atomic_pte_(particular kind of fill operation)
-> mfill_atomic_install_pte
There are of course some special cases (shmem, hugetlb), but this is the
general structure which all function names now adhere to.
Link: https://lkml.kernel.org/r/20230314221250.682452-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230314221250.682452-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-14 22:12:47 +00:00
|
|
|
struct vm_area_struct *dst_vma,
|
|
|
|
unsigned long dst_addr,
|
|
|
|
unsigned long src_addr,
|
2023-03-14 22:12:49 +00:00
|
|
|
uffd_flags_t flags,
|
2023-04-10 13:39:30 +00:00
|
|
|
struct folio **foliop)
|
2017-02-22 23:42:52 +00:00
|
|
|
{
|
2023-03-14 22:12:48 +00:00
|
|
|
struct mm_struct *dst_mm = dst_vma->vm_mm;
|
2023-03-14 22:12:49 +00:00
|
|
|
bool is_continue = uffd_flags_mode_is(flags, MFILL_ATOMIC_CONTINUE);
|
|
|
|
bool wp_enabled = (flags & MFILL_ATOMIC_WP);
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
struct hstate *h = hstate_vma(dst_vma);
|
|
|
|
struct address_space *mapping = dst_vma->vm_file->f_mapping;
|
|
|
|
pgoff_t idx = vma_hugecache_offset(h, dst_vma, dst_addr);
|
2024-06-18 09:12:41 +00:00
|
|
|
unsigned long size = huge_page_size(h);
|
2017-02-22 23:43:43 +00:00
|
|
|
int vm_shared = dst_vma->vm_flags & VM_SHARED;
|
2017-02-22 23:42:52 +00:00
|
|
|
pte_t _dst_pte;
|
|
|
|
spinlock_t *ptl;
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
int ret = -ENOMEM;
|
2023-01-25 17:05:33 +00:00
|
|
|
struct folio *folio;
|
userfaultfd: add UFFDIO_CONTINUE ioctl
This ioctl is how userspace ought to resolve "minor" userfaults. The
idea is, userspace is notified that a minor fault has occurred. It
might change the contents of the page using its second non-UFFD mapping,
or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have
ensured the page contents are correct, carry on setting up the mapping".
Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for
MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in
the minor fault case, we already have some pre-existing underlying page.
Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping.
We'd just use memcpy() or similar instead.
It turns out hugetlb_mcopy_atomic_pte() already does very close to what
we want, if an existing page is provided via `struct page **pagep`. We
already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so
just extend that design: add an enum for the three modes of operation,
and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE
case. (Basically, look up the existing page, and avoid adding the
existing page to the page cache or calling set_page_huge_active() on
it.)
Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:49 +00:00
|
|
|
int writable;
|
2023-01-25 17:05:33 +00:00
|
|
|
bool folio_in_pagecache = false;
|
2017-02-22 23:42:52 +00:00
|
|
|
|
2023-07-07 21:55:37 +00:00
|
|
|
if (uffd_flags_mode_is(flags, MFILL_ATOMIC_POISON)) {
|
|
|
|
ptl = huge_pte_lock(h, dst_mm, dst_pte);
|
|
|
|
|
|
|
|
/* Don't overwrite any existing PTEs (even markers) */
|
2024-07-02 13:51:20 +00:00
|
|
|
if (!huge_pte_none(huge_ptep_get(dst_mm, dst_addr, dst_pte))) {
|
2023-07-07 21:55:37 +00:00
|
|
|
spin_unlock(ptl);
|
|
|
|
return -EEXIST;
|
|
|
|
}
|
|
|
|
|
|
|
|
_dst_pte = make_pte_marker(PTE_MARKER_POISONED);
|
2024-06-18 09:12:41 +00:00
|
|
|
set_huge_pte_at(dst_mm, dst_addr, dst_pte, _dst_pte, size);
|
2023-07-07 21:55:37 +00:00
|
|
|
|
|
|
|
/* No need to invalidate - it was non-present before */
|
|
|
|
update_mmu_cache(dst_vma, dst_addr, dst_pte);
|
|
|
|
|
|
|
|
spin_unlock(ptl);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
userfaultfd: add UFFDIO_CONTINUE ioctl
This ioctl is how userspace ought to resolve "minor" userfaults. The
idea is, userspace is notified that a minor fault has occurred. It
might change the contents of the page using its second non-UFFD mapping,
or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have
ensured the page contents are correct, carry on setting up the mapping".
Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for
MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in
the minor fault case, we already have some pre-existing underlying page.
Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping.
We'd just use memcpy() or similar instead.
It turns out hugetlb_mcopy_atomic_pte() already does very close to what
we want, if an existing page is provided via `struct page **pagep`. We
already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so
just extend that design: add an enum for the three modes of operation,
and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE
case. (Basically, look up the existing page, and avoid adding the
existing page to the page cache or calling set_page_huge_active() on
it.)
Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:49 +00:00
|
|
|
if (is_continue) {
|
|
|
|
ret = -EFAULT;
|
2023-09-26 19:20:17 +00:00
|
|
|
folio = filemap_lock_hugetlb_folio(h, mapping, idx);
|
2023-03-07 14:34:10 +00:00
|
|
|
if (IS_ERR(folio))
|
userfaultfd: add UFFDIO_CONTINUE ioctl
This ioctl is how userspace ought to resolve "minor" userfaults. The
idea is, userspace is notified that a minor fault has occurred. It
might change the contents of the page using its second non-UFFD mapping,
or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have
ensured the page contents are correct, carry on setting up the mapping".
Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for
MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in
the minor fault case, we already have some pre-existing underlying page.
Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping.
We'd just use memcpy() or similar instead.
It turns out hugetlb_mcopy_atomic_pte() already does very close to what
we want, if an existing page is provided via `struct page **pagep`. We
already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so
just extend that design: add an enum for the three modes of operation,
and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE
case. (Basically, look up the existing page, and avoid adding the
existing page to the page cache or calling set_page_huge_active() on
it.)
Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:49 +00:00
|
|
|
goto out;
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_in_pagecache = true;
|
2023-04-10 13:39:30 +00:00
|
|
|
} else if (!*foliop) {
|
|
|
|
/* If a folio already exists, then it's UFFDIO_COPY for
|
2021-06-05 03:01:36 +00:00
|
|
|
* a non-missing case. Return -EEXIST.
|
|
|
|
*/
|
|
|
|
if (vm_shared &&
|
|
|
|
hugetlbfs_pagecache_present(h, dst_vma, dst_addr)) {
|
|
|
|
ret = -EEXIST;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
folio = alloc_hugetlb_folio(dst_vma, dst_addr, 0);
|
|
|
|
if (IS_ERR(folio)) {
|
2021-06-05 03:01:36 +00:00
|
|
|
ret = -ENOMEM;
|
2017-02-22 23:42:52 +00:00
|
|
|
goto out;
|
2021-06-05 03:01:36 +00:00
|
|
|
}
|
2017-02-22 23:42:52 +00:00
|
|
|
|
2023-04-10 13:39:29 +00:00
|
|
|
ret = copy_folio_from_user(folio, (const void __user *) src_addr,
|
|
|
|
false);
|
2017-02-22 23:42:52 +00:00
|
|
|
|
2020-06-09 04:33:54 +00:00
|
|
|
/* fallback to copy_from_user outside mmap_lock */
|
2017-02-22 23:42:52 +00:00
|
|
|
if (unlikely(ret)) {
|
2018-11-30 22:09:25 +00:00
|
|
|
ret = -ENOENT;
|
2023-01-25 17:05:33 +00:00
|
|
|
/* Free the allocated folio which may have
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
* consumed a reservation.
|
|
|
|
*/
|
2023-01-25 17:05:34 +00:00
|
|
|
restore_reserve_on_error(h, dst_vma, dst_addr, folio);
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_put(folio);
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
/* Allocate a temporary folio to hold the copied
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
* contents.
|
|
|
|
*/
|
2023-01-25 17:05:33 +00:00
|
|
|
folio = alloc_hugetlb_folio_vma(h, dst_vma, dst_addr);
|
|
|
|
if (!folio) {
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
2023-04-10 13:39:30 +00:00
|
|
|
*foliop = folio;
|
|
|
|
/* Set the outparam foliop and return to the caller to
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
* copy the contents outside the lock. Don't free the
|
2023-04-10 13:39:30 +00:00
|
|
|
* folio.
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
*/
|
2017-02-22 23:42:52 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
} else {
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
if (vm_shared &&
|
|
|
|
hugetlbfs_pagecache_present(h, dst_vma, dst_addr)) {
|
2023-04-10 13:39:30 +00:00
|
|
|
folio_put(*foliop);
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
ret = -EEXIST;
|
2023-04-10 13:39:30 +00:00
|
|
|
*foliop = NULL;
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
folio = alloc_hugetlb_folio(dst_vma, dst_addr, 0);
|
|
|
|
if (IS_ERR(folio)) {
|
2023-04-10 13:39:30 +00:00
|
|
|
folio_put(*foliop);
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
ret = -ENOMEM;
|
2023-04-10 13:39:30 +00:00
|
|
|
*foliop = NULL;
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
goto out;
|
|
|
|
}
|
2024-06-18 09:12:41 +00:00
|
|
|
ret = copy_user_large_folio(folio, *foliop,
|
|
|
|
ALIGN_DOWN(dst_addr, size), dst_vma);
|
2023-04-10 13:39:30 +00:00
|
|
|
folio_put(*foliop);
|
|
|
|
*foliop = NULL;
|
2023-04-13 13:13:49 +00:00
|
|
|
if (ret) {
|
|
|
|
folio_put(folio);
|
mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY
On UFFDIO_COPY, if we fail to copy the page contents while holding the
hugetlb_fault_mutex, we will drop the mutex and return to the caller after
allocating a page that consumed a reservation. In this case there may be
a fault that double consumes the reservation. To handle this, we free the
allocated page, fix the reservations, and allocate a temporary hugetlb
page and return that to the caller. When the caller does the copy outside
of the lock, we again check the cache, and allocate a page consuming the
reservation, and copy over the contents.
Test:
Hacked the code locally such that resv_huge_pages underflows produce
a warning and the copy_huge_page_from_user() always fails, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the
test runs number of free/resv hugepages is correct.
[yuehaibing@huawei.com: remove set but not used variable 'vm_alloc_shared']
Link: https://lkml.kernel.org/r/20210601141610.28332-1-yuehaibing@huawei.com
[almasrymina@google.com: fix allocation error check and copy func name]
Link: https://lkml.kernel.org/r/20210605010626.1459873-1-almasrymina@google.com
Link: https://lkml.kernel.org/r/20210528005029.88088-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:19 +00:00
|
|
|
goto out;
|
|
|
|
}
|
2017-02-22 23:42:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2024-03-07 01:02:50 +00:00
|
|
|
* If we just allocated a new page, we need a memory barrier to ensure
|
|
|
|
* that preceding stores to the page become visible before the
|
|
|
|
* set_pte_at() write. The memory barrier inside __folio_mark_uptodate
|
|
|
|
* is what we need.
|
|
|
|
*
|
|
|
|
* In the case where we have not allocated a new page (is_continue),
|
|
|
|
* the page must already be uptodate. UFFDIO_CONTINUE already includes
|
|
|
|
* an earlier smp_wmb() to ensure that prior stores will be visible
|
|
|
|
* before the set_pte_at() write.
|
2017-02-22 23:42:52 +00:00
|
|
|
*/
|
2024-03-07 01:02:50 +00:00
|
|
|
if (!is_continue)
|
|
|
|
__folio_mark_uptodate(folio);
|
|
|
|
else
|
|
|
|
WARN_ON_ONCE(!folio_test_uptodate(folio));
|
2017-02-22 23:42:52 +00:00
|
|
|
|
userfaultfd: add UFFDIO_CONTINUE ioctl
This ioctl is how userspace ought to resolve "minor" userfaults. The
idea is, userspace is notified that a minor fault has occurred. It
might change the contents of the page using its second non-UFFD mapping,
or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have
ensured the page contents are correct, carry on setting up the mapping".
Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for
MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in
the minor fault case, we already have some pre-existing underlying page.
Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping.
We'd just use memcpy() or similar instead.
It turns out hugetlb_mcopy_atomic_pte() already does very close to what
we want, if an existing page is provided via `struct page **pagep`. We
already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so
just extend that design: add an enum for the three modes of operation,
and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE
case. (Basically, look up the existing page, and avoid adding the
existing page to the page cache or calling set_page_huge_active() on
it.)
Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:49 +00:00
|
|
|
/* Add shared, newly allocated pages to the page cache. */
|
|
|
|
if (vm_shared && !is_continue) {
|
2017-11-02 22:59:29 +00:00
|
|
|
ret = -EFAULT;
|
2024-06-18 09:12:41 +00:00
|
|
|
if (idx >= (i_size_read(mapping->host) >> huge_page_shift(h)))
|
2017-11-02 22:59:29 +00:00
|
|
|
goto out_release_nounlock;
|
2017-02-22 23:43:43 +00:00
|
|
|
|
2017-11-02 22:59:29 +00:00
|
|
|
/*
|
|
|
|
* Serialization between remove_inode_hugepages() and
|
2022-09-14 22:18:04 +00:00
|
|
|
* hugetlb_add_to_page_cache() below happens through the
|
2017-11-02 22:59:29 +00:00
|
|
|
* hugetlb_fault_mutex_table that here must be hold by
|
|
|
|
* the caller.
|
|
|
|
*/
|
2023-01-25 17:05:35 +00:00
|
|
|
ret = hugetlb_add_to_page_cache(folio, mapping, idx);
|
2017-02-22 23:43:43 +00:00
|
|
|
if (ret)
|
|
|
|
goto out_release_nounlock;
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_in_pagecache = true;
|
2017-02-22 23:43:43 +00:00
|
|
|
}
|
|
|
|
|
2022-09-01 12:00:25 +00:00
|
|
|
ptl = huge_pte_lock(h, dst_mm, dst_pte);
|
2017-02-22 23:42:52 +00:00
|
|
|
|
2022-10-18 20:01:25 +00:00
|
|
|
ret = -EIO;
|
2023-01-25 17:05:33 +00:00
|
|
|
if (folio_test_hwpoison(folio))
|
2022-10-18 20:01:25 +00:00
|
|
|
goto out_release_unlock;
|
|
|
|
|
2022-05-13 03:22:54 +00:00
|
|
|
/*
|
|
|
|
* We allow to overwrite a pte marker: consider when both MISSING|WP
|
|
|
|
* registered, we firstly wr-protect a none pte which has no page cache
|
|
|
|
* page backing it, then access the page.
|
|
|
|
*/
|
2022-09-14 22:18:10 +00:00
|
|
|
ret = -EEXIST;
|
2024-07-02 13:51:20 +00:00
|
|
|
if (!huge_pte_none_mostly(huge_ptep_get(dst_mm, dst_addr, dst_pte)))
|
2017-02-22 23:42:52 +00:00
|
|
|
goto out_release_unlock;
|
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
if (folio_in_pagecache)
|
2023-12-20 22:44:27 +00:00
|
|
|
hugetlb_add_file_rmap(folio);
|
2022-10-20 19:38:32 +00:00
|
|
|
else
|
mm/rmap: rename hugepage_add* to hugetlb_add*
Patch series "mm/rmap: interface overhaul", v2.
This series overhauls the rmap interface, to get rid of the "bool
compound" / RMAP_COMPOUND parameter with the goal of making the interface
less error prone, more future proof, and more natural to extend to
"batching". Also, this converts the interface to always consume
folio+subpage, which speeds up operations on large folios.
Further, this series adds PTE-batching variants for 4 rmap functions,
whereby only folio_add_anon_rmap_ptes() is used for batching in this
series when PTE-remapping a PMD-mapped THP. folio_remove_rmap_ptes(),
folio_try_dup_anon_rmap_ptes() and folio_dup_file_rmap_ptes() will soon
come in handy[1,2].
This series performs a lot of folio conversion along the way. Most of the
added LOC in the diff are only due to documentation.
As we're moving to a pte/pmd interface where we clearly express the
mapping granularity we are dealing with, we first get the remainder of
hugetlb out of the way, as it is special and expected to remain special:
it treats everything as a "single logical PTE" and only currently allows
entire mappings.
Even if we'd ever support partial mappings, I strongly assume the
interface and implementation will still differ heavily: hopefull we can
avoid working on subpages/subpage mapcounts completely and only add a
"count" parameter for them to enable batching.
New (extended) hugetlb interface that operates on entire folio:
* hugetlb_add_new_anon_rmap() -> Already existed
* hugetlb_add_anon_rmap() -> Already existed
* hugetlb_try_dup_anon_rmap()
* hugetlb_try_share_anon_rmap()
* hugetlb_add_file_rmap()
* hugetlb_remove_rmap()
New "ordinary" interface for small folios / THP::
* folio_add_new_anon_rmap() -> Already existed
* folio_add_anon_rmap_[pte|ptes|pmd]()
* folio_try_dup_anon_rmap_[pte|ptes|pmd]()
* folio_try_share_anon_rmap_[pte|pmd]()
* folio_add_file_rmap_[pte|ptes|pmd]()
* folio_dup_file_rmap_[pte|ptes|pmd]()
* folio_remove_rmap_[pte|ptes|pmd]()
folio_add_new_anon_rmap() will always map at the largest granularity
possible (currently, a single PMD to cover a PMD-sized THP). Could be
extended if ever required.
In the future, we might want "_pud" variants and eventually "_pmds"
variants for batching.
I ran some simple microbenchmarks on an Intel(R) Xeon(R) Silver 4210R:
measuring munmap(), fork(), cow, MADV_DONTNEED on each PTE ... and PTE
remapping PMD-mapped THPs on 1 GiB of memory.
For small folios, there is barely a change (< 1% improvement for me).
For PTE-mapped THP:
* PTE-remapping a PMD-mapped THP is more than 10% faster.
* fork() is more than 4% faster.
* MADV_DONTNEED is 2% faster
* COW when writing only a single byte on a COW-shared PTE is 1% faster
* munmap() barely changes (< 1%).
[1] https://lkml.kernel.org/r/20230810103332.3062143-1-ryan.roberts@arm.com
[2] https://lkml.kernel.org/r/20231204105440.61448-1-ryan.roberts@arm.com
This patch (of 40):
Let's just call it "hugetlb_".
Yes, it's all already inconsistent and confusing because we have a lot of
"hugepage_" functions for legacy reasons. But "hugetlb" cannot possibly
be confused with transparent huge pages, and it matches "hugetlb.c" and
"folio_test_hugetlb()". So let's minimize confusion in rmap code.
Link: https://lkml.kernel.org/r/20231220224504.646757-1-david@redhat.com
Link: https://lkml.kernel.org/r/20231220224504.646757-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20 22:44:25 +00:00
|
|
|
hugetlb_add_new_anon_rmap(folio, dst_vma, dst_addr);
|
2017-02-22 23:42:52 +00:00
|
|
|
|
2022-05-13 03:22:54 +00:00
|
|
|
/*
|
|
|
|
* For either: (1) CONTINUE on a non-shared VMA, or (2) UFFDIO_COPY
|
|
|
|
* with wp flag set, don't set pte write bit.
|
|
|
|
*/
|
2023-03-14 22:12:49 +00:00
|
|
|
if (wp_enabled || (is_continue && !vm_shared))
|
userfaultfd: add UFFDIO_CONTINUE ioctl
This ioctl is how userspace ought to resolve "minor" userfaults. The
idea is, userspace is notified that a minor fault has occurred. It
might change the contents of the page using its second non-UFFD mapping,
or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have
ensured the page contents are correct, carry on setting up the mapping".
Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for
MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in
the minor fault case, we already have some pre-existing underlying page.
Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping.
We'd just use memcpy() or similar instead.
It turns out hugetlb_mcopy_atomic_pte() already does very close to what
we want, if an existing page is provided via `struct page **pagep`. We
already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so
just extend that design: add an enum for the three modes of operation,
and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE
case. (Basically, look up the existing page, and avoid adding the
existing page to the page cache or calling set_page_huge_active() on
it.)
Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:49 +00:00
|
|
|
writable = 0;
|
|
|
|
else
|
|
|
|
writable = dst_vma->vm_flags & VM_WRITE;
|
|
|
|
|
2023-01-25 17:05:33 +00:00
|
|
|
_dst_pte = make_huge_pte(dst_vma, &folio->page, writable);
|
2022-05-13 03:22:54 +00:00
|
|
|
/*
|
|
|
|
* Always mark UFFDIO_COPY page dirty; note that this may not be
|
|
|
|
* extremely important for hugetlbfs for now since swapping is not
|
|
|
|
* supported, but we should still be clear in that this page cannot be
|
|
|
|
* thrown away at will, even if write bit not set.
|
|
|
|
*/
|
|
|
|
_dst_pte = huge_pte_mkdirty(_dst_pte);
|
2017-02-22 23:42:52 +00:00
|
|
|
_dst_pte = pte_mkyoung(_dst_pte);
|
|
|
|
|
2023-03-14 22:12:49 +00:00
|
|
|
if (wp_enabled)
|
2022-05-13 03:22:54 +00:00
|
|
|
_dst_pte = huge_pte_mkuffd_wp(_dst_pte);
|
|
|
|
|
2024-06-18 09:12:41 +00:00
|
|
|
set_huge_pte_at(dst_mm, dst_addr, dst_pte, _dst_pte, size);
|
2017-02-22 23:42:52 +00:00
|
|
|
|
|
|
|
hugetlb_count_add(pages_per_huge_page(h), dst_mm);
|
|
|
|
|
|
|
|
/* No need to invalidate - it was non-present before */
|
|
|
|
update_mmu_cache(dst_vma, dst_addr, dst_pte);
|
|
|
|
|
|
|
|
spin_unlock(ptl);
|
userfaultfd: add UFFDIO_CONTINUE ioctl
This ioctl is how userspace ought to resolve "minor" userfaults. The
idea is, userspace is notified that a minor fault has occurred. It
might change the contents of the page using its second non-UFFD mapping,
or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have
ensured the page contents are correct, carry on setting up the mapping".
Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for
MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in
the minor fault case, we already have some pre-existing underlying page.
Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping.
We'd just use memcpy() or similar instead.
It turns out hugetlb_mcopy_atomic_pte() already does very close to what
we want, if an existing page is provided via `struct page **pagep`. We
already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so
just extend that design: add an enum for the three modes of operation,
and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE
case. (Basically, look up the existing page, and avoid adding the
existing page to the page cache or calling set_page_huge_active() on
it.)
Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:49 +00:00
|
|
|
if (!is_continue)
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_set_hugetlb_migratable(folio);
|
userfaultfd: add UFFDIO_CONTINUE ioctl
This ioctl is how userspace ought to resolve "minor" userfaults. The
idea is, userspace is notified that a minor fault has occurred. It
might change the contents of the page using its second non-UFFD mapping,
or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have
ensured the page contents are correct, carry on setting up the mapping".
Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for
MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in
the minor fault case, we already have some pre-existing underlying page.
Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping.
We'd just use memcpy() or similar instead.
It turns out hugetlb_mcopy_atomic_pte() already does very close to what
we want, if an existing page is provided via `struct page **pagep`. We
already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so
just extend that design: add an enum for the three modes of operation,
and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE
case. (Basically, look up the existing page, and avoid adding the
existing page to the page cache or calling set_page_huge_active() on
it.)
Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:49 +00:00
|
|
|
if (vm_shared || is_continue)
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_unlock(folio);
|
2017-02-22 23:42:52 +00:00
|
|
|
ret = 0;
|
|
|
|
out:
|
|
|
|
return ret;
|
|
|
|
out_release_unlock:
|
|
|
|
spin_unlock(ptl);
|
userfaultfd: add UFFDIO_CONTINUE ioctl
This ioctl is how userspace ought to resolve "minor" userfaults. The
idea is, userspace is notified that a minor fault has occurred. It
might change the contents of the page using its second non-UFFD mapping,
or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have
ensured the page contents are correct, carry on setting up the mapping".
Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for
MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in
the minor fault case, we already have some pre-existing underlying page.
Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping.
We'd just use memcpy() or similar instead.
It turns out hugetlb_mcopy_atomic_pte() already does very close to what
we want, if an existing page is provided via `struct page **pagep`. We
already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so
just extend that design: add an enum for the three modes of operation,
and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE
case. (Basically, look up the existing page, and avoid adding the
existing page to the page cache or calling set_page_huge_active() on
it.)
Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:35:49 +00:00
|
|
|
if (vm_shared || is_continue)
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_unlock(folio);
|
2017-08-10 22:23:38 +00:00
|
|
|
out_release_nounlock:
|
2023-01-25 17:05:33 +00:00
|
|
|
if (!folio_in_pagecache)
|
2023-01-25 17:05:34 +00:00
|
|
|
restore_reserve_on_error(h, dst_vma, dst_addr, folio);
|
2023-01-25 17:05:33 +00:00
|
|
|
folio_put(folio);
|
2017-02-22 23:42:52 +00:00
|
|
|
goto out;
|
|
|
|
}
|
2021-05-05 01:35:45 +00:00
|
|
|
#endif /* CONFIG_USERFAULTFD */
|
2017-02-22 23:42:52 +00:00
|
|
|
|
2023-01-04 22:52:06 +00:00
|
|
|
long hugetlb_change_protection(struct vm_area_struct *vma,
|
2022-05-13 03:22:54 +00:00
|
|
|
unsigned long address, unsigned long end,
|
|
|
|
pgprot_t newprot, unsigned long cp_flags)
|
2006-03-22 08:08:50 +00:00
|
|
|
{
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
unsigned long start = address;
|
|
|
|
pte_t *ptep;
|
|
|
|
pte_t pte;
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = hstate_vma(vma);
|
2023-01-04 22:52:06 +00:00
|
|
|
long pages = 0, psize = huge_page_size(h);
|
2018-10-05 22:51:33 +00:00
|
|
|
bool shared_pmd = false;
|
2018-12-28 08:38:09 +00:00
|
|
|
struct mmu_notifier_range range;
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
unsigned long last_addr_mask;
|
2022-05-13 03:22:54 +00:00
|
|
|
bool uffd_wp = cp_flags & MM_CP_UFFD_WP;
|
|
|
|
bool uffd_wp_resolve = cp_flags & MM_CP_UFFD_WP_RESOLVE;
|
2018-10-05 22:51:33 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* In the case of shared PMDs, the area to flush could be beyond
|
2018-12-28 08:38:09 +00:00
|
|
|
* start/end. Set range.start/range.end to cover the maximum possible
|
2018-10-05 22:51:33 +00:00
|
|
|
* range if PMD sharing is possible.
|
|
|
|
*/
|
2019-05-14 00:20:53 +00:00
|
|
|
mmu_notifier_range_init(&range, MMU_NOTIFY_PROTECTION_VMA,
|
2023-01-10 02:57:22 +00:00
|
|
|
0, mm, start, end);
|
2018-12-28 08:38:09 +00:00
|
|
|
adjust_range_if_pmd_sharing_possible(vma, &range.start, &range.end);
|
2006-03-22 08:08:50 +00:00
|
|
|
|
|
|
|
BUG_ON(address >= end);
|
2018-12-28 08:38:09 +00:00
|
|
|
flush_cache_range(vma, range.start, range.end);
|
2006-03-22 08:08:50 +00:00
|
|
|
|
2018-12-28 08:38:09 +00:00
|
|
|
mmu_notifier_invalidate_range_start(&range);
|
2022-09-14 22:18:09 +00:00
|
|
|
hugetlb_vma_lock_write(vma);
|
2014-12-13 00:54:21 +00:00
|
|
|
i_mmap_lock_write(vma->vm_file->f_mapping);
|
2022-09-14 22:18:09 +00:00
|
|
|
last_addr_mask = hugetlb_mask_last_page(h);
|
2022-05-13 03:22:55 +00:00
|
|
|
for (; address < end; address += psize) {
|
2013-11-14 22:31:02 +00:00
|
|
|
spinlock_t *ptl;
|
2022-12-16 15:52:29 +00:00
|
|
|
ptep = hugetlb_walk(vma, address, psize);
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
if (!ptep) {
|
2023-01-04 22:52:05 +00:00
|
|
|
if (!uffd_wp) {
|
|
|
|
address |= last_addr_mask;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Userfaultfd wr-protect requires pgtable
|
|
|
|
* pre-allocations to install pte markers.
|
|
|
|
*/
|
|
|
|
ptep = huge_pte_alloc(mm, vma, address, psize);
|
mm/uffd: detect pgtable allocation failures
Before this patch, when there's any pgtable allocation issues happened
during change_protection(), the error will be ignored from the syscall.
For shmem, there will be an error dumped into the host dmesg. Two issues
with that:
(1) Doing a trace dump when allocation fails is not anything close to
grace.
(2) The user should be notified with any kind of such error, so the user
can trap it and decide what to do next, either by retrying, or stop
the process properly, or anything else.
For userfault users, this will change the API of UFFDIO_WRITEPROTECT when
pgtable allocation failure happened. It should not normally break anyone,
though. If it breaks, then in good ways.
One man-page update will be on the way to introduce the new -ENOMEM for
UFFDIO_WRITEPROTECT. Not marking stable so we keep the old behavior on
the 5.19-till-now kernels.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20230104225207.1066932-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: James Houghton <jthoughton@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-04 22:52:07 +00:00
|
|
|
if (!ptep) {
|
|
|
|
pages = -ENOMEM;
|
2023-01-04 22:52:05 +00:00
|
|
|
break;
|
mm/uffd: detect pgtable allocation failures
Before this patch, when there's any pgtable allocation issues happened
during change_protection(), the error will be ignored from the syscall.
For shmem, there will be an error dumped into the host dmesg. Two issues
with that:
(1) Doing a trace dump when allocation fails is not anything close to
grace.
(2) The user should be notified with any kind of such error, so the user
can trap it and decide what to do next, either by retrying, or stop
the process properly, or anything else.
For userfault users, this will change the API of UFFDIO_WRITEPROTECT when
pgtable allocation failure happened. It should not normally break anyone,
though. If it breaks, then in good ways.
One man-page update will be on the way to introduce the new -ENOMEM for
UFFDIO_WRITEPROTECT. Not marking stable so we keep the old behavior on
the 5.19-till-now kernels.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20230104225207.1066932-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: James Houghton <jthoughton@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-04 22:52:07 +00:00
|
|
|
}
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
}
|
2013-11-14 22:31:02 +00:00
|
|
|
ptl = huge_pte_lock(h, mm, ptep);
|
2022-06-21 23:56:19 +00:00
|
|
|
if (huge_pmd_unshare(mm, vma, address, ptep)) {
|
2022-05-13 03:22:55 +00:00
|
|
|
/*
|
|
|
|
* When uffd-wp is enabled on the vma, unshare
|
|
|
|
* shouldn't happen at all. Warn about it if it
|
|
|
|
* happened due to some reason.
|
|
|
|
*/
|
|
|
|
WARN_ON_ONCE(uffd_wp || uffd_wp_resolve);
|
2012-11-19 02:14:23 +00:00
|
|
|
pages++;
|
2013-11-14 22:31:02 +00:00
|
|
|
spin_unlock(ptl);
|
2018-10-05 22:51:33 +00:00
|
|
|
shared_pmd = true;
|
2022-06-21 23:56:19 +00:00
|
|
|
address |= last_addr_mask;
|
2006-12-07 04:32:03 +00:00
|
|
|
continue;
|
2012-11-19 02:14:23 +00:00
|
|
|
}
|
2024-07-02 13:51:20 +00:00
|
|
|
pte = huge_ptep_get(mm, address, ptep);
|
2015-02-11 23:25:28 +00:00
|
|
|
if (unlikely(is_hugetlb_entry_hwpoisoned(pte))) {
|
mm/hugetlb: fix PTE marker handling in hugetlb_change_protection()
Patch series "mm/hugetlb: uffd-wp fixes for hugetlb_change_protection()".
Playing with virtio-mem and background snapshots (using uffd-wp) on
hugetlb in QEMU, I managed to trigger a VM_BUG_ON(). Looking into the
details, hugetlb_change_protection() seems to not handle uffd-wp correctly
in all cases.
Patch #1 fixes my test case. I don't have reproducers for patch #2, as it
requires running into migration entries.
I did not yet check in detail yet if !hugetlb code requires similar care.
This patch (of 2):
There are two problematic cases when stumbling over a PTE marker in
hugetlb_change_protection():
(1) We protect an uffd-wp PTE marker a second time using uffd-wp: we will
end up in the "!huge_pte_none(pte)" case and mess up the PTE marker.
(2) We unprotect a uffd-wp PTE marker: we will similarly end up in the
"!huge_pte_none(pte)" case even though we cleared the PTE, because
the "pte" variable is stale. We'll mess up the PTE marker.
For example, if we later stumble over such a "wrongly modified" PTE marker,
we'll treat it like a present PTE that maps some garbage page.
This can, for example, be triggered by mapping a memfd backed by huge
pages, registering uffd-wp, uffd-wp'ing an unmapped page and (a)
uffd-wp'ing it a second time; or (b) uffd-unprotecting it; or (c)
unregistering uffd-wp. Then, ff we trigger fallocate(FALLOC_FL_PUNCH_HOLE)
on that file range, we will run into a VM_BUG_ON:
[ 195.039560] page:00000000ba1f2987 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0
[ 195.039565] flags: 0x7ffffc0001000(reserved|node=0|zone=0|lastcpupid=0x1fffff)
[ 195.039568] raw: 0007ffffc0001000 ffffe742c0000008 ffffe742c0000008 0000000000000000
[ 195.039569] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 195.039569] page dumped because: VM_BUG_ON_PAGE(compound && !PageHead(page))
[ 195.039573] ------------[ cut here ]------------
[ 195.039574] kernel BUG at mm/rmap.c:1346!
[ 195.039579] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 195.039581] CPU: 7 PID: 4777 Comm: qemu-system-x86 Not tainted 6.0.12-200.fc36.x86_64 #1
[ 195.039583] Hardware name: LENOVO 20WNS1F81N/20WNS1F81N, BIOS N35ET50W (1.50 ) 09/15/2022
[ 195.039584] RIP: 0010:page_remove_rmap+0x45b/0x550
[ 195.039588] Code: [...]
[ 195.039589] RSP: 0018:ffffbc03c3633ba8 EFLAGS: 00010292
[ 195.039591] RAX: 0000000000000040 RBX: ffffe742c0000000 RCX: 0000000000000000
[ 195.039592] RDX: 0000000000000002 RSI: ffffffff8e7aac1a RDI: 00000000ffffffff
[ 195.039592] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffbc03c3633a08
[ 195.039593] R10: 0000000000000003 R11: ffffffff8f146328 R12: ffff9b04c42754b0
[ 195.039594] R13: ffffffff8fcc6328 R14: ffffbc03c3633c80 R15: ffff9b0484ab9100
[ 195.039595] FS: 00007fc7aaf68640(0000) GS:ffff9b0bbf7c0000(0000) knlGS:0000000000000000
[ 195.039596] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 195.039597] CR2: 000055d402c49110 CR3: 0000000159392003 CR4: 0000000000772ee0
[ 195.039598] PKRU: 55555554
[ 195.039599] Call Trace:
[ 195.039600] <TASK>
[ 195.039602] __unmap_hugepage_range+0x33b/0x7d0
[ 195.039605] unmap_hugepage_range+0x55/0x70
[ 195.039608] hugetlb_vmdelete_list+0x77/0xa0
[ 195.039611] hugetlbfs_fallocate+0x410/0x550
[ 195.039612] ? _raw_spin_unlock_irqrestore+0x23/0x40
[ 195.039616] vfs_fallocate+0x12e/0x360
[ 195.039618] __x64_sys_fallocate+0x40/0x70
[ 195.039620] do_syscall_64+0x58/0x80
[ 195.039623] ? syscall_exit_to_user_mode+0x17/0x40
[ 195.039624] ? do_syscall_64+0x67/0x80
[ 195.039626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 195.039628] RIP: 0033:0x7fc7b590651f
[ 195.039653] Code: [...]
[ 195.039654] RSP: 002b:00007fc7aaf66e70 EFLAGS: 00000293 ORIG_RAX: 000000000000011d
[ 195.039655] RAX: ffffffffffffffda RBX: 0000558ef4b7f370 RCX: 00007fc7b590651f
[ 195.039656] RDX: 0000000018000000 RSI: 0000000000000003 RDI: 000000000000000c
[ 195.039657] RBP: 0000000008000000 R08: 0000000000000000 R09: 0000000000000073
[ 195.039658] R10: 0000000008000000 R11: 0000000000000293 R12: 0000000018000000
[ 195.039658] R13: 00007fb8bbe00000 R14: 000000000000000c R15: 0000000000001000
[ 195.039661] </TASK>
Fix it by not going into the "!huge_pte_none(pte)" case if we stumble over
an exclusive marker. spin_unlock() + continue would get the job done.
However, instead, make it clearer that there are no fall-through
statements: we process each case (hwpoison, migration, marker, !none,
none) and then unlock the page table to continue with the next PTE. Let's
avoid "continue" statements and use a single spin_unlock() at the end.
Link: https://lkml.kernel.org/r/20221222205511.675832-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221222205511.675832-2-david@redhat.com
Fixes: 60dfaad65aa9 ("mm/hugetlb: allow uffd wr-protect none ptes")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-22 20:55:10 +00:00
|
|
|
/* Nothing to do. */
|
|
|
|
} else if (unlikely(is_hugetlb_entry_migration(pte))) {
|
2015-02-11 23:25:28 +00:00
|
|
|
swp_entry_t entry = pte_to_swp_entry(pte);
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
|
|
|
struct page *page = pfn_swap_entry_to_page(entry);
|
2022-12-22 20:55:11 +00:00
|
|
|
pte_t newpte = pte;
|
2015-02-11 23:25:28 +00:00
|
|
|
|
2022-12-22 20:55:11 +00:00
|
|
|
if (is_writable_migration_entry(entry)) {
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
|
|
|
if (PageAnon(page))
|
|
|
|
entry = make_readable_exclusive_migration_entry(
|
|
|
|
swp_offset(entry));
|
|
|
|
else
|
|
|
|
entry = make_readable_migration_entry(
|
|
|
|
swp_offset(entry));
|
2015-02-11 23:25:28 +00:00
|
|
|
newpte = swp_entry_to_pte(entry);
|
|
|
|
pages++;
|
|
|
|
}
|
2022-12-22 20:55:11 +00:00
|
|
|
|
|
|
|
if (uffd_wp)
|
|
|
|
newpte = pte_swp_mkuffd_wp(newpte);
|
|
|
|
else if (uffd_wp_resolve)
|
|
|
|
newpte = pte_swp_clear_uffd_wp(newpte);
|
|
|
|
if (!pte_same(pte, newpte))
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
set_huge_pte_at(mm, address, ptep, newpte, psize);
|
mm/hugetlb: fix PTE marker handling in hugetlb_change_protection()
Patch series "mm/hugetlb: uffd-wp fixes for hugetlb_change_protection()".
Playing with virtio-mem and background snapshots (using uffd-wp) on
hugetlb in QEMU, I managed to trigger a VM_BUG_ON(). Looking into the
details, hugetlb_change_protection() seems to not handle uffd-wp correctly
in all cases.
Patch #1 fixes my test case. I don't have reproducers for patch #2, as it
requires running into migration entries.
I did not yet check in detail yet if !hugetlb code requires similar care.
This patch (of 2):
There are two problematic cases when stumbling over a PTE marker in
hugetlb_change_protection():
(1) We protect an uffd-wp PTE marker a second time using uffd-wp: we will
end up in the "!huge_pte_none(pte)" case and mess up the PTE marker.
(2) We unprotect a uffd-wp PTE marker: we will similarly end up in the
"!huge_pte_none(pte)" case even though we cleared the PTE, because
the "pte" variable is stale. We'll mess up the PTE marker.
For example, if we later stumble over such a "wrongly modified" PTE marker,
we'll treat it like a present PTE that maps some garbage page.
This can, for example, be triggered by mapping a memfd backed by huge
pages, registering uffd-wp, uffd-wp'ing an unmapped page and (a)
uffd-wp'ing it a second time; or (b) uffd-unprotecting it; or (c)
unregistering uffd-wp. Then, ff we trigger fallocate(FALLOC_FL_PUNCH_HOLE)
on that file range, we will run into a VM_BUG_ON:
[ 195.039560] page:00000000ba1f2987 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0
[ 195.039565] flags: 0x7ffffc0001000(reserved|node=0|zone=0|lastcpupid=0x1fffff)
[ 195.039568] raw: 0007ffffc0001000 ffffe742c0000008 ffffe742c0000008 0000000000000000
[ 195.039569] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 195.039569] page dumped because: VM_BUG_ON_PAGE(compound && !PageHead(page))
[ 195.039573] ------------[ cut here ]------------
[ 195.039574] kernel BUG at mm/rmap.c:1346!
[ 195.039579] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 195.039581] CPU: 7 PID: 4777 Comm: qemu-system-x86 Not tainted 6.0.12-200.fc36.x86_64 #1
[ 195.039583] Hardware name: LENOVO 20WNS1F81N/20WNS1F81N, BIOS N35ET50W (1.50 ) 09/15/2022
[ 195.039584] RIP: 0010:page_remove_rmap+0x45b/0x550
[ 195.039588] Code: [...]
[ 195.039589] RSP: 0018:ffffbc03c3633ba8 EFLAGS: 00010292
[ 195.039591] RAX: 0000000000000040 RBX: ffffe742c0000000 RCX: 0000000000000000
[ 195.039592] RDX: 0000000000000002 RSI: ffffffff8e7aac1a RDI: 00000000ffffffff
[ 195.039592] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffbc03c3633a08
[ 195.039593] R10: 0000000000000003 R11: ffffffff8f146328 R12: ffff9b04c42754b0
[ 195.039594] R13: ffffffff8fcc6328 R14: ffffbc03c3633c80 R15: ffff9b0484ab9100
[ 195.039595] FS: 00007fc7aaf68640(0000) GS:ffff9b0bbf7c0000(0000) knlGS:0000000000000000
[ 195.039596] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 195.039597] CR2: 000055d402c49110 CR3: 0000000159392003 CR4: 0000000000772ee0
[ 195.039598] PKRU: 55555554
[ 195.039599] Call Trace:
[ 195.039600] <TASK>
[ 195.039602] __unmap_hugepage_range+0x33b/0x7d0
[ 195.039605] unmap_hugepage_range+0x55/0x70
[ 195.039608] hugetlb_vmdelete_list+0x77/0xa0
[ 195.039611] hugetlbfs_fallocate+0x410/0x550
[ 195.039612] ? _raw_spin_unlock_irqrestore+0x23/0x40
[ 195.039616] vfs_fallocate+0x12e/0x360
[ 195.039618] __x64_sys_fallocate+0x40/0x70
[ 195.039620] do_syscall_64+0x58/0x80
[ 195.039623] ? syscall_exit_to_user_mode+0x17/0x40
[ 195.039624] ? do_syscall_64+0x67/0x80
[ 195.039626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 195.039628] RIP: 0033:0x7fc7b590651f
[ 195.039653] Code: [...]
[ 195.039654] RSP: 002b:00007fc7aaf66e70 EFLAGS: 00000293 ORIG_RAX: 000000000000011d
[ 195.039655] RAX: ffffffffffffffda RBX: 0000558ef4b7f370 RCX: 00007fc7b590651f
[ 195.039656] RDX: 0000000018000000 RSI: 0000000000000003 RDI: 000000000000000c
[ 195.039657] RBP: 0000000008000000 R08: 0000000000000000 R09: 0000000000000073
[ 195.039658] R10: 0000000008000000 R11: 0000000000000293 R12: 0000000018000000
[ 195.039658] R13: 00007fb8bbe00000 R14: 000000000000000c R15: 0000000000001000
[ 195.039661] </TASK>
Fix it by not going into the "!huge_pte_none(pte)" case if we stumble over
an exclusive marker. spin_unlock() + continue would get the job done.
However, instead, make it clearer that there are no fall-through
statements: we process each case (hwpoison, migration, marker, !none,
none) and then unlock the page table to continue with the next PTE. Let's
avoid "continue" statements and use a single spin_unlock() at the end.
Link: https://lkml.kernel.org/r/20221222205511.675832-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221222205511.675832-2-david@redhat.com
Fixes: 60dfaad65aa9 ("mm/hugetlb: allow uffd wr-protect none ptes")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-22 20:55:10 +00:00
|
|
|
} else if (unlikely(is_pte_marker(pte))) {
|
2024-04-05 23:19:20 +00:00
|
|
|
/*
|
|
|
|
* Do nothing on a poison marker; page is
|
|
|
|
* corrupted, permissons do not apply. Here
|
|
|
|
* pte_marker_uffd_wp()==true implies !poison
|
|
|
|
* because they're mutual exclusive.
|
|
|
|
*/
|
|
|
|
if (pte_marker_uffd_wp(pte) && uffd_wp_resolve)
|
mm/hugetlb: fix PTE marker handling in hugetlb_change_protection()
Patch series "mm/hugetlb: uffd-wp fixes for hugetlb_change_protection()".
Playing with virtio-mem and background snapshots (using uffd-wp) on
hugetlb in QEMU, I managed to trigger a VM_BUG_ON(). Looking into the
details, hugetlb_change_protection() seems to not handle uffd-wp correctly
in all cases.
Patch #1 fixes my test case. I don't have reproducers for patch #2, as it
requires running into migration entries.
I did not yet check in detail yet if !hugetlb code requires similar care.
This patch (of 2):
There are two problematic cases when stumbling over a PTE marker in
hugetlb_change_protection():
(1) We protect an uffd-wp PTE marker a second time using uffd-wp: we will
end up in the "!huge_pte_none(pte)" case and mess up the PTE marker.
(2) We unprotect a uffd-wp PTE marker: we will similarly end up in the
"!huge_pte_none(pte)" case even though we cleared the PTE, because
the "pte" variable is stale. We'll mess up the PTE marker.
For example, if we later stumble over such a "wrongly modified" PTE marker,
we'll treat it like a present PTE that maps some garbage page.
This can, for example, be triggered by mapping a memfd backed by huge
pages, registering uffd-wp, uffd-wp'ing an unmapped page and (a)
uffd-wp'ing it a second time; or (b) uffd-unprotecting it; or (c)
unregistering uffd-wp. Then, ff we trigger fallocate(FALLOC_FL_PUNCH_HOLE)
on that file range, we will run into a VM_BUG_ON:
[ 195.039560] page:00000000ba1f2987 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0
[ 195.039565] flags: 0x7ffffc0001000(reserved|node=0|zone=0|lastcpupid=0x1fffff)
[ 195.039568] raw: 0007ffffc0001000 ffffe742c0000008 ffffe742c0000008 0000000000000000
[ 195.039569] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 195.039569] page dumped because: VM_BUG_ON_PAGE(compound && !PageHead(page))
[ 195.039573] ------------[ cut here ]------------
[ 195.039574] kernel BUG at mm/rmap.c:1346!
[ 195.039579] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 195.039581] CPU: 7 PID: 4777 Comm: qemu-system-x86 Not tainted 6.0.12-200.fc36.x86_64 #1
[ 195.039583] Hardware name: LENOVO 20WNS1F81N/20WNS1F81N, BIOS N35ET50W (1.50 ) 09/15/2022
[ 195.039584] RIP: 0010:page_remove_rmap+0x45b/0x550
[ 195.039588] Code: [...]
[ 195.039589] RSP: 0018:ffffbc03c3633ba8 EFLAGS: 00010292
[ 195.039591] RAX: 0000000000000040 RBX: ffffe742c0000000 RCX: 0000000000000000
[ 195.039592] RDX: 0000000000000002 RSI: ffffffff8e7aac1a RDI: 00000000ffffffff
[ 195.039592] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffbc03c3633a08
[ 195.039593] R10: 0000000000000003 R11: ffffffff8f146328 R12: ffff9b04c42754b0
[ 195.039594] R13: ffffffff8fcc6328 R14: ffffbc03c3633c80 R15: ffff9b0484ab9100
[ 195.039595] FS: 00007fc7aaf68640(0000) GS:ffff9b0bbf7c0000(0000) knlGS:0000000000000000
[ 195.039596] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 195.039597] CR2: 000055d402c49110 CR3: 0000000159392003 CR4: 0000000000772ee0
[ 195.039598] PKRU: 55555554
[ 195.039599] Call Trace:
[ 195.039600] <TASK>
[ 195.039602] __unmap_hugepage_range+0x33b/0x7d0
[ 195.039605] unmap_hugepage_range+0x55/0x70
[ 195.039608] hugetlb_vmdelete_list+0x77/0xa0
[ 195.039611] hugetlbfs_fallocate+0x410/0x550
[ 195.039612] ? _raw_spin_unlock_irqrestore+0x23/0x40
[ 195.039616] vfs_fallocate+0x12e/0x360
[ 195.039618] __x64_sys_fallocate+0x40/0x70
[ 195.039620] do_syscall_64+0x58/0x80
[ 195.039623] ? syscall_exit_to_user_mode+0x17/0x40
[ 195.039624] ? do_syscall_64+0x67/0x80
[ 195.039626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 195.039628] RIP: 0033:0x7fc7b590651f
[ 195.039653] Code: [...]
[ 195.039654] RSP: 002b:00007fc7aaf66e70 EFLAGS: 00000293 ORIG_RAX: 000000000000011d
[ 195.039655] RAX: ffffffffffffffda RBX: 0000558ef4b7f370 RCX: 00007fc7b590651f
[ 195.039656] RDX: 0000000018000000 RSI: 0000000000000003 RDI: 000000000000000c
[ 195.039657] RBP: 0000000008000000 R08: 0000000000000000 R09: 0000000000000073
[ 195.039658] R10: 0000000008000000 R11: 0000000000000293 R12: 0000000018000000
[ 195.039658] R13: 00007fb8bbe00000 R14: 000000000000000c R15: 0000000000001000
[ 195.039661] </TASK>
Fix it by not going into the "!huge_pte_none(pte)" case if we stumble over
an exclusive marker. spin_unlock() + continue would get the job done.
However, instead, make it clearer that there are no fall-through
statements: we process each case (hwpoison, migration, marker, !none,
none) and then unlock the page table to continue with the next PTE. Let's
avoid "continue" statements and use a single spin_unlock() at the end.
Link: https://lkml.kernel.org/r/20221222205511.675832-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221222205511.675832-2-david@redhat.com
Fixes: 60dfaad65aa9 ("mm/hugetlb: allow uffd wr-protect none ptes")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-22 20:55:10 +00:00
|
|
|
/* Safe to modify directly (non-present->none). */
|
2022-05-13 03:22:55 +00:00
|
|
|
huge_pte_clear(mm, address, ptep, psize);
|
mm/hugetlb: fix PTE marker handling in hugetlb_change_protection()
Patch series "mm/hugetlb: uffd-wp fixes for hugetlb_change_protection()".
Playing with virtio-mem and background snapshots (using uffd-wp) on
hugetlb in QEMU, I managed to trigger a VM_BUG_ON(). Looking into the
details, hugetlb_change_protection() seems to not handle uffd-wp correctly
in all cases.
Patch #1 fixes my test case. I don't have reproducers for patch #2, as it
requires running into migration entries.
I did not yet check in detail yet if !hugetlb code requires similar care.
This patch (of 2):
There are two problematic cases when stumbling over a PTE marker in
hugetlb_change_protection():
(1) We protect an uffd-wp PTE marker a second time using uffd-wp: we will
end up in the "!huge_pte_none(pte)" case and mess up the PTE marker.
(2) We unprotect a uffd-wp PTE marker: we will similarly end up in the
"!huge_pte_none(pte)" case even though we cleared the PTE, because
the "pte" variable is stale. We'll mess up the PTE marker.
For example, if we later stumble over such a "wrongly modified" PTE marker,
we'll treat it like a present PTE that maps some garbage page.
This can, for example, be triggered by mapping a memfd backed by huge
pages, registering uffd-wp, uffd-wp'ing an unmapped page and (a)
uffd-wp'ing it a second time; or (b) uffd-unprotecting it; or (c)
unregistering uffd-wp. Then, ff we trigger fallocate(FALLOC_FL_PUNCH_HOLE)
on that file range, we will run into a VM_BUG_ON:
[ 195.039560] page:00000000ba1f2987 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0
[ 195.039565] flags: 0x7ffffc0001000(reserved|node=0|zone=0|lastcpupid=0x1fffff)
[ 195.039568] raw: 0007ffffc0001000 ffffe742c0000008 ffffe742c0000008 0000000000000000
[ 195.039569] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 195.039569] page dumped because: VM_BUG_ON_PAGE(compound && !PageHead(page))
[ 195.039573] ------------[ cut here ]------------
[ 195.039574] kernel BUG at mm/rmap.c:1346!
[ 195.039579] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 195.039581] CPU: 7 PID: 4777 Comm: qemu-system-x86 Not tainted 6.0.12-200.fc36.x86_64 #1
[ 195.039583] Hardware name: LENOVO 20WNS1F81N/20WNS1F81N, BIOS N35ET50W (1.50 ) 09/15/2022
[ 195.039584] RIP: 0010:page_remove_rmap+0x45b/0x550
[ 195.039588] Code: [...]
[ 195.039589] RSP: 0018:ffffbc03c3633ba8 EFLAGS: 00010292
[ 195.039591] RAX: 0000000000000040 RBX: ffffe742c0000000 RCX: 0000000000000000
[ 195.039592] RDX: 0000000000000002 RSI: ffffffff8e7aac1a RDI: 00000000ffffffff
[ 195.039592] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffbc03c3633a08
[ 195.039593] R10: 0000000000000003 R11: ffffffff8f146328 R12: ffff9b04c42754b0
[ 195.039594] R13: ffffffff8fcc6328 R14: ffffbc03c3633c80 R15: ffff9b0484ab9100
[ 195.039595] FS: 00007fc7aaf68640(0000) GS:ffff9b0bbf7c0000(0000) knlGS:0000000000000000
[ 195.039596] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 195.039597] CR2: 000055d402c49110 CR3: 0000000159392003 CR4: 0000000000772ee0
[ 195.039598] PKRU: 55555554
[ 195.039599] Call Trace:
[ 195.039600] <TASK>
[ 195.039602] __unmap_hugepage_range+0x33b/0x7d0
[ 195.039605] unmap_hugepage_range+0x55/0x70
[ 195.039608] hugetlb_vmdelete_list+0x77/0xa0
[ 195.039611] hugetlbfs_fallocate+0x410/0x550
[ 195.039612] ? _raw_spin_unlock_irqrestore+0x23/0x40
[ 195.039616] vfs_fallocate+0x12e/0x360
[ 195.039618] __x64_sys_fallocate+0x40/0x70
[ 195.039620] do_syscall_64+0x58/0x80
[ 195.039623] ? syscall_exit_to_user_mode+0x17/0x40
[ 195.039624] ? do_syscall_64+0x67/0x80
[ 195.039626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 195.039628] RIP: 0033:0x7fc7b590651f
[ 195.039653] Code: [...]
[ 195.039654] RSP: 002b:00007fc7aaf66e70 EFLAGS: 00000293 ORIG_RAX: 000000000000011d
[ 195.039655] RAX: ffffffffffffffda RBX: 0000558ef4b7f370 RCX: 00007fc7b590651f
[ 195.039656] RDX: 0000000018000000 RSI: 0000000000000003 RDI: 000000000000000c
[ 195.039657] RBP: 0000000008000000 R08: 0000000000000000 R09: 0000000000000073
[ 195.039658] R10: 0000000008000000 R11: 0000000000000293 R12: 0000000018000000
[ 195.039658] R13: 00007fb8bbe00000 R14: 000000000000000c R15: 0000000000001000
[ 195.039661] </TASK>
Fix it by not going into the "!huge_pte_none(pte)" case if we stumble over
an exclusive marker. spin_unlock() + continue would get the job done.
However, instead, make it clearer that there are no fall-through
statements: we process each case (hwpoison, migration, marker, !none,
none) and then unlock the page table to continue with the next PTE. Let's
avoid "continue" statements and use a single spin_unlock() at the end.
Link: https://lkml.kernel.org/r/20221222205511.675832-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221222205511.675832-2-david@redhat.com
Fixes: 60dfaad65aa9 ("mm/hugetlb: allow uffd wr-protect none ptes")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-22 20:55:10 +00:00
|
|
|
} else if (!huge_pte_none(pte)) {
|
2019-03-05 23:46:37 +00:00
|
|
|
pte_t old_pte;
|
mm/hugetlb: change parameters of arch_make_huge_pte()
Patch series "Subject: [PATCH v2 0/5] Implement huge VMAP and VMALLOC on powerpc 8xx", v2.
This series implements huge VMAP and VMALLOC on powerpc 8xx.
Powerpc 8xx has 4 page sizes:
- 4k
- 16k
- 512k
- 8M
At the time being, vmalloc and vmap only support huge pages which are
leaf at PMD level.
Here the PMD level is 4M, it doesn't correspond to any supported
page size.
For now, implement use of 16k and 512k pages which is done
at PTE level.
Support of 8M pages will be implemented later, it requires use of
hugepd tables.
To allow this, the architecture provides two functions:
- arch_vmap_pte_range_map_size() which tells vmap_pte_range() what
page size to use. A stub returning PAGE_SIZE is provided when the
architecture doesn't provide this function.
- arch_vmap_pte_supported_shift() which tells __vmalloc_node_range()
what page shift to use for a given area size. A stub returning
PAGE_SHIFT is provided when the architecture doesn't provide this
function.
This patch (of 5):
At the time being, arch_make_huge_pte() has the following prototype:
pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable);
vma is used to get the pages shift or size.
vma is also used on Sparc to get vm_flags.
page is not used.
writable is not used.
In order to use this function without a vma, replace vma by shift and
flags. Also remove the used parameters.
Link: https://lkml.kernel.org/r/cover.1620795204.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/f4633ac6a7da2f22f31a04a89e0a7026bb78b15b.1620795204.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:00 +00:00
|
|
|
unsigned int shift = huge_page_shift(hstate_vma(vma));
|
2019-03-05 23:46:37 +00:00
|
|
|
|
|
|
|
old_pte = huge_ptep_modify_prot_start(vma, address, ptep);
|
2022-03-22 21:41:47 +00:00
|
|
|
pte = huge_pte_modify(old_pte, newprot);
|
mm/hugetlb: change parameters of arch_make_huge_pte()
Patch series "Subject: [PATCH v2 0/5] Implement huge VMAP and VMALLOC on powerpc 8xx", v2.
This series implements huge VMAP and VMALLOC on powerpc 8xx.
Powerpc 8xx has 4 page sizes:
- 4k
- 16k
- 512k
- 8M
At the time being, vmalloc and vmap only support huge pages which are
leaf at PMD level.
Here the PMD level is 4M, it doesn't correspond to any supported
page size.
For now, implement use of 16k and 512k pages which is done
at PTE level.
Support of 8M pages will be implemented later, it requires use of
hugepd tables.
To allow this, the architecture provides two functions:
- arch_vmap_pte_range_map_size() which tells vmap_pte_range() what
page size to use. A stub returning PAGE_SIZE is provided when the
architecture doesn't provide this function.
- arch_vmap_pte_supported_shift() which tells __vmalloc_node_range()
what page shift to use for a given area size. A stub returning
PAGE_SHIFT is provided when the architecture doesn't provide this
function.
This patch (of 5):
At the time being, arch_make_huge_pte() has the following prototype:
pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable);
vma is used to get the pages shift or size.
vma is also used on Sparc to get vm_flags.
page is not used.
writable is not used.
In order to use this function without a vma, replace vma by shift and
flags. Also remove the used parameters.
Link: https://lkml.kernel.org/r/cover.1620795204.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/f4633ac6a7da2f22f31a04a89e0a7026bb78b15b.1620795204.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:00 +00:00
|
|
|
pte = arch_make_huge_pte(pte, shift, vma->vm_flags);
|
2022-05-13 03:22:54 +00:00
|
|
|
if (uffd_wp)
|
2022-12-14 20:15:33 +00:00
|
|
|
pte = huge_pte_mkuffd_wp(pte);
|
2022-05-13 03:22:54 +00:00
|
|
|
else if (uffd_wp_resolve)
|
|
|
|
pte = huge_pte_clear_uffd_wp(pte);
|
2019-03-05 23:46:37 +00:00
|
|
|
huge_ptep_modify_prot_commit(vma, address, ptep, old_pte, pte);
|
2012-11-19 02:14:23 +00:00
|
|
|
pages++;
|
2022-05-13 03:22:55 +00:00
|
|
|
} else {
|
|
|
|
/* None pte */
|
|
|
|
if (unlikely(uffd_wp))
|
|
|
|
/* Safe to modify directly (none->non-present). */
|
|
|
|
set_huge_pte_at(mm, address, ptep,
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
|
|
|
make_pte_marker(PTE_MARKER_UFFD_WP),
|
|
|
|
psize);
|
2006-03-22 08:08:50 +00:00
|
|
|
}
|
2013-11-14 22:31:02 +00:00
|
|
|
spin_unlock(ptl);
|
2006-03-22 08:08:50 +00:00
|
|
|
}
|
mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
If a process creates a large hugetlbfs mapping that is eligible for page
table sharing and forks heavily with children some of whom fault and
others which destroy the mapping then it is possible for page tables to
get corrupted. Some teardowns of the mapping encounter a "bad pmd" and
output a message to the kernel log. The final teardown will trigger a
BUG_ON in mm/filemap.c.
This was reproduced in 3.4 but is known to have existed for a long time
and goes back at least as far as 2.6.37. It was probably was introduced
in 2.6.20 by [39dde65c: shared page table for hugetlb page]. The messages
look like this;
[ ..........] Lots of bad pmd messages followed by this
[ 127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7).
[ 127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7).
[ 127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7).
[ 127.186778] ------------[ cut here ]------------
[ 127.186781] kernel BUG at mm/filemap.c:134!
[ 127.186782] invalid opcode: 0000 [#1] SMP
[ 127.186783] CPU 7
[ 127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod
[ 127.186801]
[ 127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR
[ 127.186804] RIP: 0010:[<ffffffff810ed6ce>] [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186809] RSP: 0000:ffff8804144b5c08 EFLAGS: 00010002
[ 127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0
[ 127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00
[ 127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003
[ 127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8
[ 127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8
[ 127.186815] FS: 00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000
[ 127.186816] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0
[ 127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0)
[ 127.186821] Stack:
[ 127.186822] ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b
[ 127.186824] ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98
[ 127.186825] ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000
[ 127.186827] Call Trace:
[ 127.186829] [<ffffffff810ed83b>] delete_from_page_cache+0x3b/0x80
[ 127.186832] [<ffffffff811bc925>] truncate_hugepages+0x115/0x220
[ 127.186834] [<ffffffff811bca43>] hugetlbfs_evict_inode+0x13/0x30
[ 127.186837] [<ffffffff811655c7>] evict+0xa7/0x1b0
[ 127.186839] [<ffffffff811657a3>] iput_final+0xd3/0x1f0
[ 127.186840] [<ffffffff811658f9>] iput+0x39/0x50
[ 127.186842] [<ffffffff81162708>] d_kill+0xf8/0x130
[ 127.186843] [<ffffffff81162812>] dput+0xd2/0x1a0
[ 127.186845] [<ffffffff8114e2d0>] __fput+0x170/0x230
[ 127.186848] [<ffffffff81236e0e>] ? rb_erase+0xce/0x150
[ 127.186849] [<ffffffff8114e3ad>] fput+0x1d/0x30
[ 127.186851] [<ffffffff81117db7>] remove_vma+0x37/0x80
[ 127.186853] [<ffffffff81119182>] do_munmap+0x2d2/0x360
[ 127.186855] [<ffffffff811cc639>] sys_shmdt+0xc9/0x170
[ 127.186857] [<ffffffff81410a39>] system_call_fastpath+0x16/0x1b
[ 127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0
[ 127.186868] RIP [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186870] RSP <ffff8804144b5c08>
[ 127.186871] ---[ end trace 7cbac5d1db69f426 ]---
The bug is a race and not always easy to reproduce. To reproduce it I was
doing the following on a single socket I7-based machine with 16G of RAM.
$ hugeadm --pool-pages-max DEFAULT:13G
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall
$ for i in `seq 1 9000`; do ./hugetlbfs-test; done
On my particular machine, it usually triggers within 10 minutes but
enabling debug options can change the timing such that it never hits.
Once the bug is triggered, the machine is in trouble and needs to be
rebooted. The machine will respond but processes accessing proc like "ps
aux" will hang due to the BUG_ON. shutdown will also hang and needs a
hard reset or a sysrq-b.
The basic problem is a race between page table sharing and teardown. For
the most part page table sharing depends on i_mmap_mutex. In some cases,
it is also taking the mm->page_table_lock for the PTE updates but with
shared page tables, it is the i_mmap_mutex that is more important.
Unfortunately it appears to be also insufficient. Consider the following
situation
Process A Process B
--------- ---------
hugetlb_fault shmdt
LockWrite(mmap_sem)
do_munmap
unmap_region
unmap_vmas
unmap_single_vma
unmap_hugepage_range
Lock(i_mmap_mutex)
Lock(mm->page_table_lock)
huge_pmd_unshare/unmap tables <--- (1)
Unlock(mm->page_table_lock)
Unlock(i_mmap_mutex)
huge_pte_alloc ...
Lock(i_mmap_mutex) ...
vma_prio_walk, find svma, spte ...
Lock(mm->page_table_lock) ...
share spte ...
Unlock(mm->page_table_lock) ...
Unlock(i_mmap_mutex) ...
hugetlb_no_page <--- (2)
free_pgtables
unlink_file_vma
hugetlb_free_pgd_range
remove_vma_list
In this scenario, it is possible for Process A to share page tables with
Process B that is trying to tear them down. The i_mmap_mutex on its own
does not prevent Process A walking Process B's page tables. At (1) above,
the page tables are not shared yet so it unmaps the PMDs. Process A sets
up page table sharing and at (2) faults a new entry. Process B then trips
up on it in free_pgtables.
This patch fixes the problem by adding a new function
__unmap_hugepage_range_final that is only called when the VMA is about to
be destroyed. This function clears VM_MAYSHARE during
unmap_hugepage_range() under the i_mmap_mutex. This makes the VMA
ineligible for sharing and avoids the race. Superficially this looks like
it would then be vunerable to truncate and madvise issues but hugetlbfs
has its own truncate handlers so does not use unmap_mapping_range() and
does not support madvise(DONTNEED).
This should be treated as a -stable candidate if it is merged.
Test program is as follows. The test case was mostly written by Michal
Hocko with a few minor changes to reproduce this bug.
==== CUT HERE ====
static size_t huge_page_size = (2UL << 20);
static size_t nr_huge_page_A = 512;
static size_t nr_huge_page_B = 5632;
unsigned int get_random(unsigned int max)
{
struct timeval tv;
gettimeofday(&tv, NULL);
srandom(tv.tv_usec);
return random() % max;
}
static void play(void *addr, size_t size)
{
unsigned char *start = addr,
*end = start + size,
*a;
start += get_random(size/2);
/* we could itterate on huge pages but let's give it more time. */
for (a = start; a < end; a += 4096)
*a = 0;
}
int main(int argc, char **argv)
{
key_t key = IPC_PRIVATE;
size_t sizeA = nr_huge_page_A * huge_page_size;
size_t sizeB = nr_huge_page_B * huge_page_size;
int shmidA, shmidB;
void *addrA = NULL, *addrB = NULL;
int nr_children = 300, n = 0;
if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
fork_child:
switch(fork()) {
case 0:
switch (n%3) {
case 0:
play(addrA, sizeA);
break;
case 1:
play(addrB, sizeB);
break;
case 2:
break;
}
break;
case -1:
perror("fork:");
break;
default:
if (++n < nr_children)
goto fork_child;
play(addrA, sizeA);
break;
}
shmdt(addrA);
shmdt(addrB);
do {
wait(NULL);
} while (--n > 0);
shmctl(shmidA, IPC_RMID, NULL);
shmctl(shmidB, IPC_RMID, NULL);
return 0;
}
[akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:46:20 +00:00
|
|
|
/*
|
2014-12-13 00:54:24 +00:00
|
|
|
* Must flush TLB before releasing i_mmap_rwsem: x86's huge_pmd_unshare
|
mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
If a process creates a large hugetlbfs mapping that is eligible for page
table sharing and forks heavily with children some of whom fault and
others which destroy the mapping then it is possible for page tables to
get corrupted. Some teardowns of the mapping encounter a "bad pmd" and
output a message to the kernel log. The final teardown will trigger a
BUG_ON in mm/filemap.c.
This was reproduced in 3.4 but is known to have existed for a long time
and goes back at least as far as 2.6.37. It was probably was introduced
in 2.6.20 by [39dde65c: shared page table for hugetlb page]. The messages
look like this;
[ ..........] Lots of bad pmd messages followed by this
[ 127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7).
[ 127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7).
[ 127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7).
[ 127.186778] ------------[ cut here ]------------
[ 127.186781] kernel BUG at mm/filemap.c:134!
[ 127.186782] invalid opcode: 0000 [#1] SMP
[ 127.186783] CPU 7
[ 127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod
[ 127.186801]
[ 127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR
[ 127.186804] RIP: 0010:[<ffffffff810ed6ce>] [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186809] RSP: 0000:ffff8804144b5c08 EFLAGS: 00010002
[ 127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0
[ 127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00
[ 127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003
[ 127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8
[ 127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8
[ 127.186815] FS: 00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000
[ 127.186816] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0
[ 127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0)
[ 127.186821] Stack:
[ 127.186822] ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b
[ 127.186824] ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98
[ 127.186825] ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000
[ 127.186827] Call Trace:
[ 127.186829] [<ffffffff810ed83b>] delete_from_page_cache+0x3b/0x80
[ 127.186832] [<ffffffff811bc925>] truncate_hugepages+0x115/0x220
[ 127.186834] [<ffffffff811bca43>] hugetlbfs_evict_inode+0x13/0x30
[ 127.186837] [<ffffffff811655c7>] evict+0xa7/0x1b0
[ 127.186839] [<ffffffff811657a3>] iput_final+0xd3/0x1f0
[ 127.186840] [<ffffffff811658f9>] iput+0x39/0x50
[ 127.186842] [<ffffffff81162708>] d_kill+0xf8/0x130
[ 127.186843] [<ffffffff81162812>] dput+0xd2/0x1a0
[ 127.186845] [<ffffffff8114e2d0>] __fput+0x170/0x230
[ 127.186848] [<ffffffff81236e0e>] ? rb_erase+0xce/0x150
[ 127.186849] [<ffffffff8114e3ad>] fput+0x1d/0x30
[ 127.186851] [<ffffffff81117db7>] remove_vma+0x37/0x80
[ 127.186853] [<ffffffff81119182>] do_munmap+0x2d2/0x360
[ 127.186855] [<ffffffff811cc639>] sys_shmdt+0xc9/0x170
[ 127.186857] [<ffffffff81410a39>] system_call_fastpath+0x16/0x1b
[ 127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0
[ 127.186868] RIP [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186870] RSP <ffff8804144b5c08>
[ 127.186871] ---[ end trace 7cbac5d1db69f426 ]---
The bug is a race and not always easy to reproduce. To reproduce it I was
doing the following on a single socket I7-based machine with 16G of RAM.
$ hugeadm --pool-pages-max DEFAULT:13G
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall
$ for i in `seq 1 9000`; do ./hugetlbfs-test; done
On my particular machine, it usually triggers within 10 minutes but
enabling debug options can change the timing such that it never hits.
Once the bug is triggered, the machine is in trouble and needs to be
rebooted. The machine will respond but processes accessing proc like "ps
aux" will hang due to the BUG_ON. shutdown will also hang and needs a
hard reset or a sysrq-b.
The basic problem is a race between page table sharing and teardown. For
the most part page table sharing depends on i_mmap_mutex. In some cases,
it is also taking the mm->page_table_lock for the PTE updates but with
shared page tables, it is the i_mmap_mutex that is more important.
Unfortunately it appears to be also insufficient. Consider the following
situation
Process A Process B
--------- ---------
hugetlb_fault shmdt
LockWrite(mmap_sem)
do_munmap
unmap_region
unmap_vmas
unmap_single_vma
unmap_hugepage_range
Lock(i_mmap_mutex)
Lock(mm->page_table_lock)
huge_pmd_unshare/unmap tables <--- (1)
Unlock(mm->page_table_lock)
Unlock(i_mmap_mutex)
huge_pte_alloc ...
Lock(i_mmap_mutex) ...
vma_prio_walk, find svma, spte ...
Lock(mm->page_table_lock) ...
share spte ...
Unlock(mm->page_table_lock) ...
Unlock(i_mmap_mutex) ...
hugetlb_no_page <--- (2)
free_pgtables
unlink_file_vma
hugetlb_free_pgd_range
remove_vma_list
In this scenario, it is possible for Process A to share page tables with
Process B that is trying to tear them down. The i_mmap_mutex on its own
does not prevent Process A walking Process B's page tables. At (1) above,
the page tables are not shared yet so it unmaps the PMDs. Process A sets
up page table sharing and at (2) faults a new entry. Process B then trips
up on it in free_pgtables.
This patch fixes the problem by adding a new function
__unmap_hugepage_range_final that is only called when the VMA is about to
be destroyed. This function clears VM_MAYSHARE during
unmap_hugepage_range() under the i_mmap_mutex. This makes the VMA
ineligible for sharing and avoids the race. Superficially this looks like
it would then be vunerable to truncate and madvise issues but hugetlbfs
has its own truncate handlers so does not use unmap_mapping_range() and
does not support madvise(DONTNEED).
This should be treated as a -stable candidate if it is merged.
Test program is as follows. The test case was mostly written by Michal
Hocko with a few minor changes to reproduce this bug.
==== CUT HERE ====
static size_t huge_page_size = (2UL << 20);
static size_t nr_huge_page_A = 512;
static size_t nr_huge_page_B = 5632;
unsigned int get_random(unsigned int max)
{
struct timeval tv;
gettimeofday(&tv, NULL);
srandom(tv.tv_usec);
return random() % max;
}
static void play(void *addr, size_t size)
{
unsigned char *start = addr,
*end = start + size,
*a;
start += get_random(size/2);
/* we could itterate on huge pages but let's give it more time. */
for (a = start; a < end; a += 4096)
*a = 0;
}
int main(int argc, char **argv)
{
key_t key = IPC_PRIVATE;
size_t sizeA = nr_huge_page_A * huge_page_size;
size_t sizeB = nr_huge_page_B * huge_page_size;
int shmidA, shmidB;
void *addrA = NULL, *addrB = NULL;
int nr_children = 300, n = 0;
if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
fork_child:
switch(fork()) {
case 0:
switch (n%3) {
case 0:
play(addrA, sizeA);
break;
case 1:
play(addrB, sizeB);
break;
case 2:
break;
}
break;
case -1:
perror("fork:");
break;
default:
if (++n < nr_children)
goto fork_child;
play(addrA, sizeA);
break;
}
shmdt(addrA);
shmdt(addrB);
do {
wait(NULL);
} while (--n > 0);
shmctl(shmidA, IPC_RMID, NULL);
shmctl(shmidB, IPC_RMID, NULL);
return 0;
}
[akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:46:20 +00:00
|
|
|
* may have cleared our pud entry and done put_page on the page table:
|
2014-12-13 00:54:24 +00:00
|
|
|
* once we release i_mmap_rwsem, another task can do the final put_page
|
2018-10-05 22:51:33 +00:00
|
|
|
* and that page table be reused and filled with junk. If we actually
|
|
|
|
* did unshare a page of pmds, flush the range corresponding to the pud.
|
mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
If a process creates a large hugetlbfs mapping that is eligible for page
table sharing and forks heavily with children some of whom fault and
others which destroy the mapping then it is possible for page tables to
get corrupted. Some teardowns of the mapping encounter a "bad pmd" and
output a message to the kernel log. The final teardown will trigger a
BUG_ON in mm/filemap.c.
This was reproduced in 3.4 but is known to have existed for a long time
and goes back at least as far as 2.6.37. It was probably was introduced
in 2.6.20 by [39dde65c: shared page table for hugetlb page]. The messages
look like this;
[ ..........] Lots of bad pmd messages followed by this
[ 127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7).
[ 127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7).
[ 127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7).
[ 127.186778] ------------[ cut here ]------------
[ 127.186781] kernel BUG at mm/filemap.c:134!
[ 127.186782] invalid opcode: 0000 [#1] SMP
[ 127.186783] CPU 7
[ 127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod
[ 127.186801]
[ 127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR
[ 127.186804] RIP: 0010:[<ffffffff810ed6ce>] [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186809] RSP: 0000:ffff8804144b5c08 EFLAGS: 00010002
[ 127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0
[ 127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00
[ 127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003
[ 127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8
[ 127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8
[ 127.186815] FS: 00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000
[ 127.186816] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0
[ 127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0)
[ 127.186821] Stack:
[ 127.186822] ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b
[ 127.186824] ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98
[ 127.186825] ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000
[ 127.186827] Call Trace:
[ 127.186829] [<ffffffff810ed83b>] delete_from_page_cache+0x3b/0x80
[ 127.186832] [<ffffffff811bc925>] truncate_hugepages+0x115/0x220
[ 127.186834] [<ffffffff811bca43>] hugetlbfs_evict_inode+0x13/0x30
[ 127.186837] [<ffffffff811655c7>] evict+0xa7/0x1b0
[ 127.186839] [<ffffffff811657a3>] iput_final+0xd3/0x1f0
[ 127.186840] [<ffffffff811658f9>] iput+0x39/0x50
[ 127.186842] [<ffffffff81162708>] d_kill+0xf8/0x130
[ 127.186843] [<ffffffff81162812>] dput+0xd2/0x1a0
[ 127.186845] [<ffffffff8114e2d0>] __fput+0x170/0x230
[ 127.186848] [<ffffffff81236e0e>] ? rb_erase+0xce/0x150
[ 127.186849] [<ffffffff8114e3ad>] fput+0x1d/0x30
[ 127.186851] [<ffffffff81117db7>] remove_vma+0x37/0x80
[ 127.186853] [<ffffffff81119182>] do_munmap+0x2d2/0x360
[ 127.186855] [<ffffffff811cc639>] sys_shmdt+0xc9/0x170
[ 127.186857] [<ffffffff81410a39>] system_call_fastpath+0x16/0x1b
[ 127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0
[ 127.186868] RIP [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[ 127.186870] RSP <ffff8804144b5c08>
[ 127.186871] ---[ end trace 7cbac5d1db69f426 ]---
The bug is a race and not always easy to reproduce. To reproduce it I was
doing the following on a single socket I7-based machine with 16G of RAM.
$ hugeadm --pool-pages-max DEFAULT:13G
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall
$ for i in `seq 1 9000`; do ./hugetlbfs-test; done
On my particular machine, it usually triggers within 10 minutes but
enabling debug options can change the timing such that it never hits.
Once the bug is triggered, the machine is in trouble and needs to be
rebooted. The machine will respond but processes accessing proc like "ps
aux" will hang due to the BUG_ON. shutdown will also hang and needs a
hard reset or a sysrq-b.
The basic problem is a race between page table sharing and teardown. For
the most part page table sharing depends on i_mmap_mutex. In some cases,
it is also taking the mm->page_table_lock for the PTE updates but with
shared page tables, it is the i_mmap_mutex that is more important.
Unfortunately it appears to be also insufficient. Consider the following
situation
Process A Process B
--------- ---------
hugetlb_fault shmdt
LockWrite(mmap_sem)
do_munmap
unmap_region
unmap_vmas
unmap_single_vma
unmap_hugepage_range
Lock(i_mmap_mutex)
Lock(mm->page_table_lock)
huge_pmd_unshare/unmap tables <--- (1)
Unlock(mm->page_table_lock)
Unlock(i_mmap_mutex)
huge_pte_alloc ...
Lock(i_mmap_mutex) ...
vma_prio_walk, find svma, spte ...
Lock(mm->page_table_lock) ...
share spte ...
Unlock(mm->page_table_lock) ...
Unlock(i_mmap_mutex) ...
hugetlb_no_page <--- (2)
free_pgtables
unlink_file_vma
hugetlb_free_pgd_range
remove_vma_list
In this scenario, it is possible for Process A to share page tables with
Process B that is trying to tear them down. The i_mmap_mutex on its own
does not prevent Process A walking Process B's page tables. At (1) above,
the page tables are not shared yet so it unmaps the PMDs. Process A sets
up page table sharing and at (2) faults a new entry. Process B then trips
up on it in free_pgtables.
This patch fixes the problem by adding a new function
__unmap_hugepage_range_final that is only called when the VMA is about to
be destroyed. This function clears VM_MAYSHARE during
unmap_hugepage_range() under the i_mmap_mutex. This makes the VMA
ineligible for sharing and avoids the race. Superficially this looks like
it would then be vunerable to truncate and madvise issues but hugetlbfs
has its own truncate handlers so does not use unmap_mapping_range() and
does not support madvise(DONTNEED).
This should be treated as a -stable candidate if it is merged.
Test program is as follows. The test case was mostly written by Michal
Hocko with a few minor changes to reproduce this bug.
==== CUT HERE ====
static size_t huge_page_size = (2UL << 20);
static size_t nr_huge_page_A = 512;
static size_t nr_huge_page_B = 5632;
unsigned int get_random(unsigned int max)
{
struct timeval tv;
gettimeofday(&tv, NULL);
srandom(tv.tv_usec);
return random() % max;
}
static void play(void *addr, size_t size)
{
unsigned char *start = addr,
*end = start + size,
*a;
start += get_random(size/2);
/* we could itterate on huge pages but let's give it more time. */
for (a = start; a < end; a += 4096)
*a = 0;
}
int main(int argc, char **argv)
{
key_t key = IPC_PRIVATE;
size_t sizeA = nr_huge_page_A * huge_page_size;
size_t sizeB = nr_huge_page_B * huge_page_size;
int shmidA, shmidB;
void *addrA = NULL, *addrB = NULL;
int nr_children = 300, n = 0;
if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
perror("shmget:");
return 1;
}
if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) {
perror("shmat");
return 1;
}
fork_child:
switch(fork()) {
case 0:
switch (n%3) {
case 0:
play(addrA, sizeA);
break;
case 1:
play(addrB, sizeB);
break;
case 2:
break;
}
break;
case -1:
perror("fork:");
break;
default:
if (++n < nr_children)
goto fork_child;
play(addrA, sizeA);
break;
}
shmdt(addrA);
shmdt(addrB);
do {
wait(NULL);
} while (--n > 0);
shmctl(shmidA, IPC_RMID, NULL);
shmctl(shmidB, IPC_RMID, NULL);
return 0;
}
[akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:46:20 +00:00
|
|
|
*/
|
2018-10-05 22:51:33 +00:00
|
|
|
if (shared_pmd)
|
2018-12-28 08:38:09 +00:00
|
|
|
flush_hugetlb_tlb_range(vma, range.start, range.end);
|
2018-10-05 22:51:33 +00:00
|
|
|
else
|
|
|
|
flush_hugetlb_tlb_range(vma, start, end);
|
2017-11-16 01:34:07 +00:00
|
|
|
/*
|
2023-07-25 13:42:07 +00:00
|
|
|
* No need to call mmu_notifier_arch_invalidate_secondary_tlbs() we are
|
|
|
|
* downgrading page table protection not changing it to point to a new
|
|
|
|
* page.
|
2017-11-16 01:34:07 +00:00
|
|
|
*
|
2022-06-27 06:00:26 +00:00
|
|
|
* See Documentation/mm/mmu_notifier.rst
|
2017-11-16 01:34:07 +00:00
|
|
|
*/
|
2014-12-13 00:54:21 +00:00
|
|
|
i_mmap_unlock_write(vma->vm_file->f_mapping);
|
2022-09-14 22:18:09 +00:00
|
|
|
hugetlb_vma_unlock_write(vma);
|
2018-12-28 08:38:09 +00:00
|
|
|
mmu_notifier_invalidate_range_end(&range);
|
2012-11-19 02:14:23 +00:00
|
|
|
|
mm/uffd: detect pgtable allocation failures
Before this patch, when there's any pgtable allocation issues happened
during change_protection(), the error will be ignored from the syscall.
For shmem, there will be an error dumped into the host dmesg. Two issues
with that:
(1) Doing a trace dump when allocation fails is not anything close to
grace.
(2) The user should be notified with any kind of such error, so the user
can trap it and decide what to do next, either by retrying, or stop
the process properly, or anything else.
For userfault users, this will change the API of UFFDIO_WRITEPROTECT when
pgtable allocation failure happened. It should not normally break anyone,
though. If it breaks, then in good ways.
One man-page update will be on the way to introduce the new -ENOMEM for
UFFDIO_WRITEPROTECT. Not marking stable so we keep the old behavior on
the 5.19-till-now kernels.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20230104225207.1066932-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: James Houghton <jthoughton@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-04 22:52:07 +00:00
|
|
|
return pages > 0 ? (pages << h->order) : pages;
|
2006-03-22 08:08:50 +00:00
|
|
|
}
|
|
|
|
|
2021-02-24 20:09:54 +00:00
|
|
|
/* Return true if reservation was successful, false otherwise. */
|
|
|
|
bool hugetlb_reserve_pages(struct inode *inode,
|
2008-07-24 04:27:23 +00:00
|
|
|
long from, long to,
|
2009-02-10 14:02:27 +00:00
|
|
|
struct vm_area_struct *vma,
|
2011-05-26 10:16:19 +00:00
|
|
|
vm_flags_t vm_flags)
|
2007-10-16 08:26:19 +00:00
|
|
|
{
|
2022-12-16 22:45:07 +00:00
|
|
|
long chg = -1, add = -1;
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = hstate_inode(inode);
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
struct hugepage_subpool *spool = subpool_inode(inode);
|
mm, hugetlb: unify region structure handling
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping. For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.
Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:25 +00:00
|
|
|
struct resv_map *resv_map;
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
struct hugetlb_cgroup *h_cg = NULL;
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
long gbl_reserve, regions_needed = 0;
|
2007-10-16 08:26:19 +00:00
|
|
|
|
hugetlbfs: check for pgoff value overflow
A vma with vm_pgoff large enough to overflow a loff_t type when
converted to a byte offset can be passed via the remap_file_pages system
call. The hugetlbfs mmap routine uses the byte offset to calculate
reservations and file size.
A sequence such as:
mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0);
remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0);
will result in the following when task exits/file closed,
kernel BUG at mm/hugetlb.c:749!
Call Trace:
hugetlbfs_evict_inode+0x2f/0x40
evict+0xcb/0x190
__dentry_kill+0xcb/0x150
__fput+0x164/0x1e0
task_work_run+0x84/0xa0
exit_to_usermode_loop+0x7d/0x80
do_syscall_64+0x18b/0x190
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
The overflowed pgoff value causes hugetlbfs to try to set up a mapping
with a negative range (end < start) that leaves invalid state which
causes the BUG.
The previous overflow fix to this code was incomplete and did not take
the remap_file_pages system call into account.
[mike.kravetz@oracle.com: v3]
Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com
[akpm@linux-foundation.org: include mmdebug.h]
[akpm@linux-foundation.org: fix -ve left shift count on sh]
Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com
Fixes: 045c7a3f53d9 ("hugetlbfs: fix offset overflow in hugetlbfs mmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nic Losby <blurbdust@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-22 23:17:13 +00:00
|
|
|
/* This should never happen */
|
|
|
|
if (from > to) {
|
|
|
|
VM_WARN(1, "%s called with a negative range\n", __func__);
|
2021-02-24 20:09:54 +00:00
|
|
|
return false;
|
hugetlbfs: check for pgoff value overflow
A vma with vm_pgoff large enough to overflow a loff_t type when
converted to a byte offset can be passed via the remap_file_pages system
call. The hugetlbfs mmap routine uses the byte offset to calculate
reservations and file size.
A sequence such as:
mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0);
remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0);
will result in the following when task exits/file closed,
kernel BUG at mm/hugetlb.c:749!
Call Trace:
hugetlbfs_evict_inode+0x2f/0x40
evict+0xcb/0x190
__dentry_kill+0xcb/0x150
__fput+0x164/0x1e0
task_work_run+0x84/0xa0
exit_to_usermode_loop+0x7d/0x80
do_syscall_64+0x18b/0x190
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
The overflowed pgoff value causes hugetlbfs to try to set up a mapping
with a negative range (end < start) that leaves invalid state which
causes the BUG.
The previous overflow fix to this code was incomplete and did not take
the remap_file_pages system call into account.
[mike.kravetz@oracle.com: v3]
Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com
[akpm@linux-foundation.org: include mmdebug.h]
[akpm@linux-foundation.org: fix -ve left shift count on sh]
Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com
Fixes: 045c7a3f53d9 ("hugetlbfs: fix offset overflow in hugetlbfs mmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nic Losby <blurbdust@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-22 23:17:13 +00:00
|
|
|
}
|
|
|
|
|
2022-09-14 22:18:07 +00:00
|
|
|
/*
|
2022-12-12 23:50:41 +00:00
|
|
|
* vma specific semaphore used for pmd sharing and fault/truncation
|
|
|
|
* synchronization
|
2022-09-14 22:18:07 +00:00
|
|
|
*/
|
|
|
|
hugetlb_vma_lock_alloc(vma);
|
|
|
|
|
2009-02-11 16:34:16 +00:00
|
|
|
/*
|
|
|
|
* Only apply hugepage reservation if asked. At fault time, an
|
|
|
|
* attempt will be made for VM_NORESERVE to allocate a page
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
* without using reserves
|
2009-02-11 16:34:16 +00:00
|
|
|
*/
|
2011-05-26 10:16:19 +00:00
|
|
|
if (vm_flags & VM_NORESERVE)
|
2021-02-24 20:09:54 +00:00
|
|
|
return true;
|
2009-02-11 16:34:16 +00:00
|
|
|
|
2008-07-24 04:27:23 +00:00
|
|
|
/*
|
|
|
|
* Shared mappings base their reservation on the number of pages that
|
|
|
|
* are already allocated on behalf of the file. Private mappings need
|
|
|
|
* to reserve the full area even if read-only as mprotect() may be
|
|
|
|
* called to make the mapping read-write. Assume !vma is a shm mapping
|
|
|
|
*/
|
mm, hugetlb: unify region structure handling
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping. For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.
Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:25 +00:00
|
|
|
if (!vma || vma->vm_flags & VM_MAYSHARE) {
|
2019-05-14 00:22:55 +00:00
|
|
|
/*
|
|
|
|
* resv_map can not be NULL as hugetlb_reserve_pages is only
|
|
|
|
* called for inodes for which resv_maps were created (see
|
|
|
|
* hugetlbfs_get_inode).
|
|
|
|
*/
|
2014-04-03 21:47:30 +00:00
|
|
|
resv_map = inode_resv_map(inode);
|
mm, hugetlb: unify region structure handling
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping. For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.
Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:25 +00:00
|
|
|
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
chg = region_chg(resv_map, from, to, ®ions_needed);
|
mm, hugetlb: unify region structure handling
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping. For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.
Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:25 +00:00
|
|
|
} else {
|
2020-04-02 04:11:21 +00:00
|
|
|
/* Private mapping. */
|
mm, hugetlb: unify region structure handling
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping. For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.
Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:25 +00:00
|
|
|
resv_map = resv_map_alloc();
|
2009-02-11 16:34:16 +00:00
|
|
|
if (!resv_map)
|
2022-09-14 22:18:07 +00:00
|
|
|
goto out_err;
|
2009-02-11 16:34:16 +00:00
|
|
|
|
2008-07-24 04:27:23 +00:00
|
|
|
chg = to - from;
|
2008-07-24 04:27:32 +00:00
|
|
|
|
2009-02-11 16:34:16 +00:00
|
|
|
set_vma_resv_map(vma, resv_map);
|
|
|
|
set_vma_resv_flags(vma, HPAGE_RESV_OWNER);
|
|
|
|
}
|
|
|
|
|
2021-02-24 20:09:54 +00:00
|
|
|
if (chg < 0)
|
2012-05-29 22:06:46 +00:00
|
|
|
goto out_err;
|
2007-05-09 09:33:34 +00:00
|
|
|
|
2021-02-24 20:09:54 +00:00
|
|
|
if (hugetlb_cgroup_charge_cgroup_rsvd(hstate_index(h),
|
|
|
|
chg * pages_per_huge_page(h), &h_cg) < 0)
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
goto out_err;
|
|
|
|
|
|
|
|
if (vma && !(vma->vm_flags & VM_MAYSHARE) && h_cg) {
|
|
|
|
/* For private mappings, the hugetlb_cgroup uncharge info hangs
|
|
|
|
* of the resv_map.
|
|
|
|
*/
|
|
|
|
resv_map_set_hugetlb_cgroup_uncharge_info(resv_map, h_cg, h);
|
|
|
|
}
|
|
|
|
|
2015-04-15 23:13:39 +00:00
|
|
|
/*
|
|
|
|
* There must be enough pages in the subpool for the mapping. If
|
|
|
|
* the subpool has a minimum size, there may be some global
|
|
|
|
* reservations already in place (gbl_reserve).
|
|
|
|
*/
|
|
|
|
gbl_reserve = hugepage_subpool_get_pages(spool, chg);
|
2021-02-24 20:09:54 +00:00
|
|
|
if (gbl_reserve < 0)
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
goto out_uncharge_cgroup;
|
2009-02-10 14:02:27 +00:00
|
|
|
|
|
|
|
/*
|
2009-02-11 16:34:16 +00:00
|
|
|
* Check enough hugepages are available for the reservation.
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
* Hand the pages back to the subpool if there are not
|
2009-02-10 14:02:27 +00:00
|
|
|
*/
|
2021-02-24 20:09:54 +00:00
|
|
|
if (hugetlb_acct_memory(h, gbl_reserve) < 0)
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
goto out_put_pages;
|
2009-02-11 16:34:16 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Account for the reservations made. Shared mappings record regions
|
|
|
|
* that have reservations as they are shared by multiple VMAs.
|
|
|
|
* When the last VMA disappears, the region map says how much
|
|
|
|
* the reservation was and the page cache tells how much of
|
|
|
|
* the reservation was consumed. Private mappings are per-VMA and
|
|
|
|
* only the consumed reservations are tracked. When the VMA
|
|
|
|
* disappears, the original reservation is the VMA size and the
|
|
|
|
* consumed reservations are stored in the map. Hence, nothing
|
|
|
|
* else has to be done for private mappings here
|
|
|
|
*/
|
2015-06-24 23:57:58 +00:00
|
|
|
if (!vma || vma->vm_flags & VM_MAYSHARE) {
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
add = region_add(resv_map, from, to, regions_needed, h, h_cg);
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
|
|
|
|
if (unlikely(add < 0)) {
|
|
|
|
hugetlb_acct_memory(h, -gbl_reserve);
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
goto out_put_pages;
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
} else if (unlikely(chg > add)) {
|
2015-06-24 23:57:58 +00:00
|
|
|
/*
|
|
|
|
* pages in this range were added to the reserve
|
|
|
|
* map between region_chg and region_add. This
|
2023-01-25 17:05:33 +00:00
|
|
|
* indicates a race with alloc_hugetlb_folio. Adjust
|
2015-06-24 23:57:58 +00:00
|
|
|
* the subpool and reserve counts modified above
|
|
|
|
* based on the difference.
|
|
|
|
*/
|
|
|
|
long rsv_adjust;
|
|
|
|
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
/*
|
|
|
|
* hugetlb_cgroup_uncharge_cgroup_rsvd() will put the
|
|
|
|
* reference to h_cg->css. See comment below for detail.
|
|
|
|
*/
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
hugetlb_cgroup_uncharge_cgroup_rsvd(
|
|
|
|
hstate_index(h),
|
|
|
|
(chg - add) * pages_per_huge_page(h), h_cg);
|
|
|
|
|
2015-06-24 23:57:58 +00:00
|
|
|
rsv_adjust = hugepage_subpool_put_pages(spool,
|
|
|
|
chg - add);
|
|
|
|
hugetlb_acct_memory(h, -rsv_adjust);
|
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25 04:37:17 +00:00
|
|
|
} else if (h_cg) {
|
|
|
|
/*
|
|
|
|
* The file_regions will hold their own reference to
|
|
|
|
* h_cg->css. So we should release the reference held
|
|
|
|
* via hugetlb_cgroup_charge_cgroup_rsvd() when we are
|
|
|
|
* done.
|
|
|
|
*/
|
|
|
|
hugetlb_cgroup_put_rsvd_cgroup(h_cg);
|
2015-06-24 23:57:58 +00:00
|
|
|
}
|
|
|
|
}
|
2021-02-24 20:09:54 +00:00
|
|
|
return true;
|
|
|
|
|
hugetlb_cgroup: add accounting for shared mappings
For shared mappings, the pointer to the hugetlb_cgroup to uncharge lives
in the resv_map entries, in file_region->reservation_counter.
After a call to region_chg, we charge the approprate hugetlb_cgroup, and
if successful, we pass on the hugetlb_cgroup info to a follow up
region_add call. When a file_region entry is added to the resv_map via
region_add, we put the pointer to that cgroup in
file_region->reservation_counter. If charging doesn't succeed, we report
the error to the caller, so that the kernel fails the reservation.
On region_del, which is when the hugetlb memory is unreserved, we also
uncharge the file_region->reservation_counter.
[akpm@linux-foundation.org: forward declare struct file_region]
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-5-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:28 +00:00
|
|
|
out_put_pages:
|
|
|
|
/* put back original number of pages, chg */
|
|
|
|
(void)hugepage_subpool_put_pages(spool, chg);
|
|
|
|
out_uncharge_cgroup:
|
|
|
|
hugetlb_cgroup_uncharge_cgroup_rsvd(hstate_index(h),
|
|
|
|
chg * pages_per_huge_page(h), h_cg);
|
2012-05-29 22:06:46 +00:00
|
|
|
out_err:
|
2022-09-14 22:18:07 +00:00
|
|
|
hugetlb_vma_lock_free(vma);
|
2015-09-08 22:01:28 +00:00
|
|
|
if (!vma || vma->vm_flags & VM_MAYSHARE)
|
hugetlb: disable region_add file_region coalescing
A follow up patch in this series adds hugetlb cgroup uncharge info the
file_region entries in resv->regions. The cgroup uncharge info may differ
for different regions, so they can no longer be coalesced at region_add
time. So, disable region coalescing in region_add in this patch.
Behavior change:
Say a resv_map exists like this [0->1], [2->3], and [5->6].
Then a region_chg/add call comes in region_chg/add(f=0, t=5).
Old code would generate resv->regions: [0->5], [5->6].
New code would generate resv->regions: [0->1], [1->2], [2->3], [3->5],
[5->6].
Special care needs to be taken to handle the resv->adds_in_progress
variable correctly. In the past, only 1 region would be added for every
region_chg and region_add call. But now, each call may add multiple
regions, so we can no longer increment adds_in_progress by 1 in
region_chg, or decrement adds_in_progress by 1 after region_add or
region_abort. Instead, region_chg calls add_reservation_in_range() to
count the number of regions needed and allocates those, and that info is
passed to region_add and region_abort to decrement adds_in_progress
correctly.
We've also modified the assumption that region_add after region_chg never
fails. region_chg now pre-allocates at least 1 region for region_add. If
region_add needs more regions than region_chg has allocated for it, then
it may fail.
[almasrymina@google.com: fix file_region entry allocations]
Link: http://lkml.kernel.org/r/20200219012736.20363-1-almasrymina@google.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: http://lkml.kernel.org/r/20200211213128.73302-4-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:25 +00:00
|
|
|
/* Only call region_abort if the region_chg succeeded but the
|
|
|
|
* region_add failed or didn't run.
|
|
|
|
*/
|
|
|
|
if (chg >= 0 && add < 0)
|
|
|
|
region_abort(resv_map, from, to, regions_needed);
|
hugetlbfs: clear resv_map pointer if mmap fails
Patch series "hugetlbfs: close race between MADV_DONTNEED and page fault", v7.
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by extending the hugetlb_vma_lock locking scheme to also
cover private hugetlb mappings (with resv_map), and pulling the locking
from __unmap_hugepage_final_range into helper functions called from
zap_page_range_single. This ensures page faults stay locked out of the
MADV_DONTNEED VMA until the huge pages have actually been freed.
This patch (of 3):
Hugetlbfs leaves a dangling pointer in the VMA if mmap fails. This has
not been a problem so far, but other code in this patch series tries to
follow that pointer.
Link: https://lkml.kernel.org/r/20231006040020.3677377-1-riel@surriel.com
Link: https://lkml.kernel.org/r/20231006040020.3677377-2-riel@surriel.com
Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 03:59:06 +00:00
|
|
|
if (vma && is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
|
2014-04-03 21:47:28 +00:00
|
|
|
kref_put(&resv_map->refs, resv_map_release);
|
hugetlbfs: clear resv_map pointer if mmap fails
Patch series "hugetlbfs: close race between MADV_DONTNEED and page fault", v7.
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by extending the hugetlb_vma_lock locking scheme to also
cover private hugetlb mappings (with resv_map), and pulling the locking
from __unmap_hugepage_final_range into helper functions called from
zap_page_range_single. This ensures page faults stay locked out of the
MADV_DONTNEED VMA until the huge pages have actually been freed.
This patch (of 3):
Hugetlbfs leaves a dangling pointer in the VMA if mmap fails. This has
not been a problem so far, but other code in this patch series tries to
follow that pointer.
Link: https://lkml.kernel.org/r/20231006040020.3677377-1-riel@surriel.com
Link: https://lkml.kernel.org/r/20231006040020.3677377-2-riel@surriel.com
Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 03:59:06 +00:00
|
|
|
set_vma_resv_map(vma, NULL);
|
|
|
|
}
|
2021-02-24 20:09:54 +00:00
|
|
|
return false;
|
2006-06-23 09:03:15 +00:00
|
|
|
}
|
|
|
|
|
2015-09-08 22:01:41 +00:00
|
|
|
long hugetlb_unreserve_pages(struct inode *inode, long start, long end,
|
|
|
|
long freed)
|
2006-06-23 09:03:15 +00:00
|
|
|
{
|
2008-07-24 04:27:41 +00:00
|
|
|
struct hstate *h = hstate_inode(inode);
|
2014-04-03 21:47:30 +00:00
|
|
|
struct resv_map *resv_map = inode_resv_map(inode);
|
mm, hugetlb: unify region structure handling
Currently, to track reserved and allocated regions, we use two different
ways, depending on the mapping. For MAP_SHARED, we use
address_mapping's private_list and, while for MAP_PRIVATE, we use a
resv_map.
Now, we are preparing to change a coarse grained lock which protect a
region structure to fine grained lock, and this difference hinder it.
So, before changing it, unify region structure handling, consistently
using a resv_map regardless of the kind of mapping.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:25 +00:00
|
|
|
long chg = 0;
|
hugepages: fix use after free bug in "quota" handling
hugetlbfs_{get,put}_quota() are badly named. They don't interact with the
general quota handling code, and they don't much resemble its behaviour.
Rather than being about maintaining limits on on-disk block usage by
particular users, they are instead about maintaining limits on in-memory
page usage (including anonymous MAP_PRIVATE copied-on-write pages)
associated with a particular hugetlbfs filesystem instance.
Worse, they work by having callbacks to the hugetlbfs filesystem code from
the low-level page handling code, in particular from free_huge_page().
This is a layering violation of itself, but more importantly, if the
kernel does a get_user_pages() on hugepages (which can happen from KVM
amongst others), then the free_huge_page() can be delayed until after the
associated inode has already been freed. If an unmount occurs at the
wrong time, even the hugetlbfs superblock where the "quota" limits are
stored may have been freed.
Andrew Barry proposed a patch to fix this by having hugepages, instead of
storing a pointer to their address_space and reaching the superblock from
there, had the hugepages store pointers directly to the superblock,
bumping the reference count as appropriate to avoid it being freed.
Andrew Morton rejected that version, however, on the grounds that it made
the existing layering violation worse.
This is a reworked version of Andrew's patch, which removes the extra, and
some of the existing, layering violation. It works by introducing the
concept of a hugepage "subpool" at the lower hugepage mm layer - that is a
finite logical pool of hugepages to allocate from. hugetlbfs now creates
a subpool for each filesystem instance with a page limit set, and a
pointer to the subpool gets added to each allocated hugepage, instead of
the address_space pointer used now. The subpool has its own lifetime and
is only freed once all pages in it _and_ all other references to it (i.e.
superblocks) are gone.
subpools are optional - a NULL subpool pointer is taken by the code to
mean that no subpool limits are in effect.
Previous discussion of this bug found in: "Fix refcounting in hugetlbfs
quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or
http://marc.info/?l=linux-mm&m=126928970510627&w=1
v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to
alloc_huge_page() - since it already takes the vma, it is not necessary.
Signed-off-by: Andrew Barry <abarry@cray.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:12 +00:00
|
|
|
struct hugepage_subpool *spool = subpool_inode(inode);
|
2015-04-15 23:13:39 +00:00
|
|
|
long gbl_reserve;
|
2007-11-15 00:59:44 +00:00
|
|
|
|
2019-05-14 00:22:55 +00:00
|
|
|
/*
|
|
|
|
* Since this routine can be called in the evict inode path for all
|
|
|
|
* hugetlbfs inodes, resv_map could be NULL.
|
|
|
|
*/
|
2015-09-08 22:01:41 +00:00
|
|
|
if (resv_map) {
|
|
|
|
chg = region_del(resv_map, start, end);
|
|
|
|
/*
|
|
|
|
* region_del() can fail in the rare case where a region
|
|
|
|
* must be split and another region descriptor can not be
|
|
|
|
* allocated. If end == LONG_MAX, it will not fail.
|
|
|
|
*/
|
|
|
|
if (chg < 0)
|
|
|
|
return chg;
|
|
|
|
}
|
|
|
|
|
2007-11-15 00:59:44 +00:00
|
|
|
spin_lock(&inode->i_lock);
|
2009-07-29 22:02:16 +00:00
|
|
|
inode->i_blocks -= (blocks_per_huge_page(h) * freed);
|
2007-11-15 00:59:44 +00:00
|
|
|
spin_unlock(&inode->i_lock);
|
|
|
|
|
2015-04-15 23:13:39 +00:00
|
|
|
/*
|
|
|
|
* If the subpool has a minimum size, the number of global
|
|
|
|
* reservations to be released may be adjusted.
|
2021-05-05 01:34:35 +00:00
|
|
|
*
|
|
|
|
* Note that !resv_map implies freed == 0. So (chg - freed)
|
|
|
|
* won't go negative.
|
2015-04-15 23:13:39 +00:00
|
|
|
*/
|
|
|
|
gbl_reserve = hugepage_subpool_put_pages(spool, (chg - freed));
|
|
|
|
hugetlb_acct_memory(h, -gbl_reserve);
|
2015-09-08 22:01:41 +00:00
|
|
|
|
|
|
|
return 0;
|
2006-06-23 09:03:15 +00:00
|
|
|
}
|
2010-05-28 00:29:20 +00:00
|
|
|
|
2024-07-26 15:07:27 +00:00
|
|
|
#ifdef CONFIG_HUGETLB_PMD_PAGE_TABLE_SHARING
|
2013-04-23 11:35:02 +00:00
|
|
|
static unsigned long page_table_shareable(struct vm_area_struct *svma,
|
|
|
|
struct vm_area_struct *vma,
|
|
|
|
unsigned long addr, pgoff_t idx)
|
|
|
|
{
|
|
|
|
unsigned long saddr = ((idx - svma->vm_pgoff) << PAGE_SHIFT) +
|
|
|
|
svma->vm_start;
|
|
|
|
unsigned long sbase = saddr & PUD_MASK;
|
|
|
|
unsigned long s_end = sbase + PUD_SIZE;
|
|
|
|
|
|
|
|
/* Allow segments to share if only one is marked locked */
|
2023-01-26 19:37:48 +00:00
|
|
|
unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED_MASK;
|
|
|
|
unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED_MASK;
|
2013-04-23 11:35:02 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* match the virtual addresses, permission and the alignment of the
|
|
|
|
* page table page.
|
hugetlb: fix vma lock handling during split vma and range unmapping
Patch series "hugetlb: fixes for new vma lock series".
In review of the series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", Miaohe Lin pointed out two key issues:
1) There is a race in the routine hugetlb_unmap_file_folio when locks
are dropped and reacquired in the correct order [1].
2) With the switch to using vma lock for fault/truncate synchronization,
we need to make sure lock exists for all VM_MAYSHARE vmas, not just
vmas capable of pmd sharing.
These two issues are addressed here. In addition, having a vma lock
present in all VM_MAYSHARE vmas, uncovered some issues around vma
splitting. Those are also addressed.
[1] https://lore.kernel.org/linux-mm/01f10195-7088-4462-6def-909549c75ef4@huawei.com/
This patch (of 3):
The hugetlb vma lock hangs off the vm_private_data field and is specific
to the vma. When vm_area_dup() is called as part of vma splitting, the
vma lock pointer is copied to the new vma. This will result in issues
such as double freeing of the structure. Update the hugetlb open vm_ops
to allocate a new vma lock for the new vma.
The routine __unmap_hugepage_range_final unconditionally unset VM_MAYSHARE
to prevent subsequent pmd sharing. hugetlb_vma_lock_free attempted to
anticipate this by checking both VM_MAYSHARE and VM_SHARED. However, if
only VM_MAYSHARE was set we would miss the free. With the introduction of
the vma lock, a vma can not participate in pmd sharing if vm_private_data
is NULL. Instead of clearing VM_MAYSHARE in __unmap_hugepage_range_final,
free the vma lock to prevent sharing. Also, update the sharing code to
make sure vma lock is indeed a condition for pmd sharing.
hugetlb_vma_lock_free can then key off VM_MAYSHARE and not miss any vmas.
Link: https://lkml.kernel.org/r/20221005011707.514612-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20221005011707.514612-2-mike.kravetz@oracle.com
Fixes: "hugetlb: add vma based lock for pmd sharing"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-05 01:17:05 +00:00
|
|
|
*
|
|
|
|
* Also, vma_lock (vm_private_data) is required for sharing.
|
2013-04-23 11:35:02 +00:00
|
|
|
*/
|
|
|
|
if (pmd_index(addr) != pmd_index(saddr) ||
|
|
|
|
vm_flags != svm_flags ||
|
hugetlb: fix vma lock handling during split vma and range unmapping
Patch series "hugetlb: fixes for new vma lock series".
In review of the series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", Miaohe Lin pointed out two key issues:
1) There is a race in the routine hugetlb_unmap_file_folio when locks
are dropped and reacquired in the correct order [1].
2) With the switch to using vma lock for fault/truncate synchronization,
we need to make sure lock exists for all VM_MAYSHARE vmas, not just
vmas capable of pmd sharing.
These two issues are addressed here. In addition, having a vma lock
present in all VM_MAYSHARE vmas, uncovered some issues around vma
splitting. Those are also addressed.
[1] https://lore.kernel.org/linux-mm/01f10195-7088-4462-6def-909549c75ef4@huawei.com/
This patch (of 3):
The hugetlb vma lock hangs off the vm_private_data field and is specific
to the vma. When vm_area_dup() is called as part of vma splitting, the
vma lock pointer is copied to the new vma. This will result in issues
such as double freeing of the structure. Update the hugetlb open vm_ops
to allocate a new vma lock for the new vma.
The routine __unmap_hugepage_range_final unconditionally unset VM_MAYSHARE
to prevent subsequent pmd sharing. hugetlb_vma_lock_free attempted to
anticipate this by checking both VM_MAYSHARE and VM_SHARED. However, if
only VM_MAYSHARE was set we would miss the free. With the introduction of
the vma lock, a vma can not participate in pmd sharing if vm_private_data
is NULL. Instead of clearing VM_MAYSHARE in __unmap_hugepage_range_final,
free the vma lock to prevent sharing. Also, update the sharing code to
make sure vma lock is indeed a condition for pmd sharing.
hugetlb_vma_lock_free can then key off VM_MAYSHARE and not miss any vmas.
Link: https://lkml.kernel.org/r/20221005011707.514612-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20221005011707.514612-2-mike.kravetz@oracle.com
Fixes: "hugetlb: add vma based lock for pmd sharing"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-05 01:17:05 +00:00
|
|
|
!range_in_vma(svma, sbase, s_end) ||
|
|
|
|
!svma->vm_private_data)
|
2013-04-23 11:35:02 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
return saddr;
|
|
|
|
}
|
|
|
|
|
2022-10-05 01:17:07 +00:00
|
|
|
bool want_pmd_share(struct vm_area_struct *vma, unsigned long addr)
|
2013-04-23 11:35:02 +00:00
|
|
|
{
|
2022-10-05 01:17:07 +00:00
|
|
|
unsigned long start = addr & PUD_MASK;
|
|
|
|
unsigned long end = start + PUD_SIZE;
|
|
|
|
|
2022-09-14 22:18:07 +00:00
|
|
|
#ifdef CONFIG_USERFAULTFD
|
|
|
|
if (uffd_disable_huge_pmd_share(vma))
|
|
|
|
return false;
|
|
|
|
#endif
|
2013-04-23 11:35:02 +00:00
|
|
|
/*
|
|
|
|
* check on proper vm_flags and page table alignment
|
|
|
|
*/
|
2022-09-14 22:18:07 +00:00
|
|
|
if (!(vma->vm_flags & VM_MAYSHARE))
|
|
|
|
return false;
|
2022-10-05 01:17:07 +00:00
|
|
|
if (!vma->vm_private_data) /* vma lock required for sharing */
|
2022-09-14 22:18:07 +00:00
|
|
|
return false;
|
|
|
|
if (!range_in_vma(vma, start, end))
|
|
|
|
return false;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2018-10-05 22:51:29 +00:00
|
|
|
/*
|
|
|
|
* Determine if start,end range within vma could be mapped by shared pmd.
|
|
|
|
* If yes, adjust start and end to cover range associated with possible
|
|
|
|
* shared pmd mappings.
|
|
|
|
*/
|
|
|
|
void adjust_range_if_pmd_sharing_possible(struct vm_area_struct *vma,
|
|
|
|
unsigned long *start, unsigned long *end)
|
|
|
|
{
|
mm/hugetlb.c: fix unnecessary address expansion of pmd sharing
The current code would unnecessarily expand the address range. Consider
one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) =
(1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M)
without expand. But the current result will be (1G-4M, 3G+4M). Actually,
the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd
sharing.
After this patch, we will check that the vma span at least one PUD aligned
size and the start,end range overlap the aligned range of vma.
With above example, the aligned vma range is (1G, 3G), so if (start, end)
range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to
both start and end. Otherwise, we will have chance to adjust start
downwards or end upwards without exceeding (vm_start, vm_end).
Mike:
: The 'adjusted range' is used for calls to mmu notifiers and cache(tlb)
: flushing. Since the current code unnecessarily expands the range in some
: cases, more entries than necessary would be flushed. This would/could
: result in performance degradation. However, this is highly dependent on
: the user runtime. Is there a combination of vma layout and calls to
: actually hit this issue? If the issue is hit, will those entries
: unnecessarily flushed be used again and need to be unnecessarily reloaded?
Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com
Fixes: 75802ca66354 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 20:06:54 +00:00
|
|
|
unsigned long v_start = ALIGN(vma->vm_start, PUD_SIZE),
|
|
|
|
v_end = ALIGN_DOWN(vma->vm_end, PUD_SIZE);
|
2018-10-05 22:51:29 +00:00
|
|
|
|
mm/hugetlb.c: fix unnecessary address expansion of pmd sharing
The current code would unnecessarily expand the address range. Consider
one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) =
(1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M)
without expand. But the current result will be (1G-4M, 3G+4M). Actually,
the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd
sharing.
After this patch, we will check that the vma span at least one PUD aligned
size and the start,end range overlap the aligned range of vma.
With above example, the aligned vma range is (1G, 3G), so if (start, end)
range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to
both start and end. Otherwise, we will have chance to adjust start
downwards or end upwards without exceeding (vm_start, vm_end).
Mike:
: The 'adjusted range' is used for calls to mmu notifiers and cache(tlb)
: flushing. Since the current code unnecessarily expands the range in some
: cases, more entries than necessary would be flushed. This would/could
: result in performance degradation. However, this is highly dependent on
: the user runtime. Is there a combination of vma layout and calls to
: actually hit this issue? If the issue is hit, will those entries
: unnecessarily flushed be used again and need to be unnecessarily reloaded?
Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com
Fixes: 75802ca66354 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 20:06:54 +00:00
|
|
|
/*
|
2021-05-07 01:06:47 +00:00
|
|
|
* vma needs to span at least one aligned PUD size, and the range
|
|
|
|
* must be at least partially within in.
|
mm/hugetlb.c: fix unnecessary address expansion of pmd sharing
The current code would unnecessarily expand the address range. Consider
one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) =
(1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M)
without expand. But the current result will be (1G-4M, 3G+4M). Actually,
the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd
sharing.
After this patch, we will check that the vma span at least one PUD aligned
size and the start,end range overlap the aligned range of vma.
With above example, the aligned vma range is (1G, 3G), so if (start, end)
range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to
both start and end. Otherwise, we will have chance to adjust start
downwards or end upwards without exceeding (vm_start, vm_end).
Mike:
: The 'adjusted range' is used for calls to mmu notifiers and cache(tlb)
: flushing. Since the current code unnecessarily expands the range in some
: cases, more entries than necessary would be flushed. This would/could
: result in performance degradation. However, this is highly dependent on
: the user runtime. Is there a combination of vma layout and calls to
: actually hit this issue? If the issue is hit, will those entries
: unnecessarily flushed be used again and need to be unnecessarily reloaded?
Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com
Fixes: 75802ca66354 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 20:06:54 +00:00
|
|
|
*/
|
|
|
|
if (!(vma->vm_flags & VM_MAYSHARE) || !(v_end > v_start) ||
|
|
|
|
(*end <= v_start) || (*start >= v_end))
|
2018-10-05 22:51:29 +00:00
|
|
|
return;
|
|
|
|
|
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
This is found by code observation only.
Firstly, the worst case scenario should assume the whole range was covered
by pmd sharing. The old algorithm might not work as expected for ranges
like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the
expected range should be (0, 2g).
Since at it, remove the loop since it should not be required. With that,
the new code should be faster too when the invalidating range is huge.
Mike said:
: With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only
: adjust to (0, 1g+2m) which is incorrect.
:
: We should cc stable. The original reason for adjusting the range was to
: prevent data corruption (getting wrong page). Since the range is not
: always adjusted correctly, the potential for corruption still exists.
:
: However, I am fairly confident that adjust_range_if_pmd_sharing_possible
: is only gong to be called in two cases:
:
: 1) for a single page
: 2) for range == entire vma
:
: In those cases, the current code should produce the correct results.
:
: To be safe, let's just cc stable.
Fixes: 017b1660df89 ("mm: migration: fix migration of huge PMD shared pages")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 06:26:11 +00:00
|
|
|
/* Extend the range to be PUD aligned for a worst case scenario */
|
mm/hugetlb.c: fix unnecessary address expansion of pmd sharing
The current code would unnecessarily expand the address range. Consider
one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) =
(1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M)
without expand. But the current result will be (1G-4M, 3G+4M). Actually,
the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd
sharing.
After this patch, we will check that the vma span at least one PUD aligned
size and the start,end range overlap the aligned range of vma.
With above example, the aligned vma range is (1G, 3G), so if (start, end)
range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to
both start and end. Otherwise, we will have chance to adjust start
downwards or end upwards without exceeding (vm_start, vm_end).
Mike:
: The 'adjusted range' is used for calls to mmu notifiers and cache(tlb)
: flushing. Since the current code unnecessarily expands the range in some
: cases, more entries than necessary would be flushed. This would/could
: result in performance degradation. However, this is highly dependent on
: the user runtime. Is there a combination of vma layout and calls to
: actually hit this issue? If the issue is hit, will those entries
: unnecessarily flushed be used again and need to be unnecessarily reloaded?
Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com
Fixes: 75802ca66354 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 20:06:54 +00:00
|
|
|
if (*start > v_start)
|
|
|
|
*start = ALIGN_DOWN(*start, PUD_SIZE);
|
2018-10-05 22:51:29 +00:00
|
|
|
|
mm/hugetlb.c: fix unnecessary address expansion of pmd sharing
The current code would unnecessarily expand the address range. Consider
one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) =
(1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M)
without expand. But the current result will be (1G-4M, 3G+4M). Actually,
the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd
sharing.
After this patch, we will check that the vma span at least one PUD aligned
size and the start,end range overlap the aligned range of vma.
With above example, the aligned vma range is (1G, 3G), so if (start, end)
range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to
both start and end. Otherwise, we will have chance to adjust start
downwards or end upwards without exceeding (vm_start, vm_end).
Mike:
: The 'adjusted range' is used for calls to mmu notifiers and cache(tlb)
: flushing. Since the current code unnecessarily expands the range in some
: cases, more entries than necessary would be flushed. This would/could
: result in performance degradation. However, this is highly dependent on
: the user runtime. Is there a combination of vma layout and calls to
: actually hit this issue? If the issue is hit, will those entries
: unnecessarily flushed be used again and need to be unnecessarily reloaded?
Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com
Fixes: 75802ca66354 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 20:06:54 +00:00
|
|
|
if (*end < v_end)
|
|
|
|
*end = ALIGN(*end, PUD_SIZE);
|
2018-10-05 22:51:29 +00:00
|
|
|
}
|
|
|
|
|
2013-04-23 11:35:02 +00:00
|
|
|
/*
|
|
|
|
* Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc()
|
|
|
|
* and returns the corresponding pte. While this is not necessary for the
|
|
|
|
* !shared pmd case because we can allocate the pmd later as well, it makes the
|
2022-09-14 22:18:03 +00:00
|
|
|
* code much cleaner. pmd allocation is essential for the shared case because
|
|
|
|
* pud has to be populated inside the same i_mmap_rwsem section - otherwise
|
|
|
|
* racing tasks could either miss the sharing (see huge_pte_offset) or select a
|
|
|
|
* bad pmd for sharing.
|
2013-04-23 11:35:02 +00:00
|
|
|
*/
|
2021-05-05 01:33:00 +00:00
|
|
|
pte_t *huge_pmd_share(struct mm_struct *mm, struct vm_area_struct *vma,
|
|
|
|
unsigned long addr, pud_t *pud)
|
2013-04-23 11:35:02 +00:00
|
|
|
{
|
|
|
|
struct address_space *mapping = vma->vm_file->f_mapping;
|
|
|
|
pgoff_t idx = ((addr - vma->vm_start) >> PAGE_SHIFT) +
|
|
|
|
vma->vm_pgoff;
|
|
|
|
struct vm_area_struct *svma;
|
|
|
|
unsigned long saddr;
|
|
|
|
pte_t *spte = NULL;
|
|
|
|
pte_t *pte;
|
|
|
|
|
2022-09-14 22:18:03 +00:00
|
|
|
i_mmap_lock_read(mapping);
|
2013-04-23 11:35:02 +00:00
|
|
|
vma_interval_tree_foreach(svma, &mapping->i_mmap, idx, idx) {
|
|
|
|
if (svma == vma)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
saddr = page_table_shareable(svma, vma, addr, idx);
|
|
|
|
if (saddr) {
|
2022-12-16 15:52:29 +00:00
|
|
|
spte = hugetlb_walk(svma, saddr,
|
|
|
|
vma_mmu_pagesize(svma));
|
2013-04-23 11:35:02 +00:00
|
|
|
if (spte) {
|
|
|
|
get_page(virt_to_page(spte));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!spte)
|
|
|
|
goto out;
|
|
|
|
|
mm/hugetlb: fix pgtable lock on pmd sharing
Huge pmd sharing operates on PUD not PMD, huge_pte_lock() is not suitable
in this case because it should only work for last level pte changes, while
pmd sharing is always one level higher.
Meanwhile, here we're locking over the spte pgtable lock which is even not
a lock for current mm but someone else's.
It seems even racy on operating on the lock, as after put_page() of the
spte pgtable page logically the page can be released, so at least the
spin_unlock() needs to be done after the put_page().
No report I am aware, I'm not even sure whether it'll just work on taking
the spte pmd lock, because while we're holding i_mmap read lock it probably
means the vma interval tree is frozen, all pte allocators over this pud
entry could always find the specific svma and spte page, so maybe they'll
serialize on this spte page lock? Even so, doesn't seem to be expected.
It just seems to be an accident of cb900f412154.
Fix it with the proper pud lock (which is the mm's page_table_lock).
Link: https://lkml.kernel.org/r/20230612160420.809818-1-peterx@redhat.com
Fixes: cb900f412154 ("mm, hugetlb: convert hugetlbfs to use split pmd lock")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:04:20 +00:00
|
|
|
spin_lock(&mm->page_table_lock);
|
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 23:26:50 +00:00
|
|
|
if (pud_none(*pud)) {
|
2013-04-23 11:35:02 +00:00
|
|
|
pud_populate(mm, pud,
|
|
|
|
(pmd_t *)((unsigned long)spte & PAGE_MASK));
|
2016-06-24 21:49:51 +00:00
|
|
|
mm_inc_nr_pmds(mm);
|
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 23:26:50 +00:00
|
|
|
} else {
|
2013-04-23 11:35:02 +00:00
|
|
|
put_page(virt_to_page(spte));
|
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 23:26:50 +00:00
|
|
|
}
|
mm/hugetlb: fix pgtable lock on pmd sharing
Huge pmd sharing operates on PUD not PMD, huge_pte_lock() is not suitable
in this case because it should only work for last level pte changes, while
pmd sharing is always one level higher.
Meanwhile, here we're locking over the spte pgtable lock which is even not
a lock for current mm but someone else's.
It seems even racy on operating on the lock, as after put_page() of the
spte pgtable page logically the page can be released, so at least the
spin_unlock() needs to be done after the put_page().
No report I am aware, I'm not even sure whether it'll just work on taking
the spte pmd lock, because while we're holding i_mmap read lock it probably
means the vma interval tree is frozen, all pte allocators over this pud
entry could always find the specific svma and spte page, so maybe they'll
serialize on this spte page lock? Even so, doesn't seem to be expected.
It just seems to be an accident of cb900f412154.
Fix it with the proper pud lock (which is the mm's page_table_lock).
Link: https://lkml.kernel.org/r/20230612160420.809818-1-peterx@redhat.com
Fixes: cb900f412154 ("mm, hugetlb: convert hugetlbfs to use split pmd lock")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:04:20 +00:00
|
|
|
spin_unlock(&mm->page_table_lock);
|
2013-04-23 11:35:02 +00:00
|
|
|
out:
|
|
|
|
pte = (pte_t *)pmd_alloc(mm, pud, addr);
|
2022-09-14 22:18:03 +00:00
|
|
|
i_mmap_unlock_read(mapping);
|
2013-04-23 11:35:02 +00:00
|
|
|
return pte;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* unmap huge page backed by shared pte.
|
|
|
|
*
|
|
|
|
* Hugetlb pte page is ref counted at the time of mapping. If pte is shared
|
|
|
|
* indicated by page_count > 1, unmap is achieved by clearing pud and
|
|
|
|
* decrementing the ref count. If count == 1, the pte page is not shared.
|
|
|
|
*
|
2022-09-14 22:18:03 +00:00
|
|
|
* Called with page table lock held.
|
2013-04-23 11:35:02 +00:00
|
|
|
*
|
|
|
|
* returns: 1 successfully unmapped a shared pte page
|
|
|
|
* 0 the underlying pte page is not shared, or it is the last user
|
|
|
|
*/
|
2020-08-12 01:31:38 +00:00
|
|
|
int huge_pmd_unshare(struct mm_struct *mm, struct vm_area_struct *vma,
|
2022-06-21 23:56:19 +00:00
|
|
|
unsigned long addr, pte_t *ptep)
|
2013-04-23 11:35:02 +00:00
|
|
|
{
|
2022-06-21 23:56:19 +00:00
|
|
|
pgd_t *pgd = pgd_offset(mm, addr);
|
|
|
|
p4d_t *p4d = p4d_offset(pgd, addr);
|
|
|
|
pud_t *pud = pud_offset(p4d, addr);
|
2013-04-23 11:35:02 +00:00
|
|
|
|
2020-08-12 01:31:38 +00:00
|
|
|
i_mmap_assert_write_locked(vma->vm_file->f_mapping);
|
2022-09-14 22:18:09 +00:00
|
|
|
hugetlb_vma_assert_locked(vma);
|
2013-04-23 11:35:02 +00:00
|
|
|
BUG_ON(page_count(virt_to_page(ptep)) == 0);
|
|
|
|
if (page_count(virt_to_page(ptep)) == 1)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
pud_clear(pud);
|
|
|
|
put_page(virt_to_page(ptep));
|
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 23:26:50 +00:00
|
|
|
mm_dec_nr_pmds(mm);
|
2013-04-23 11:35:02 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2021-05-05 01:33:04 +00:00
|
|
|
|
2024-07-26 15:07:27 +00:00
|
|
|
#else /* !CONFIG_HUGETLB_PMD_PAGE_TABLE_SHARING */
|
2022-09-14 22:18:07 +00:00
|
|
|
|
2021-05-05 01:33:00 +00:00
|
|
|
pte_t *huge_pmd_share(struct mm_struct *mm, struct vm_area_struct *vma,
|
|
|
|
unsigned long addr, pud_t *pud)
|
2013-04-30 07:02:03 +00:00
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
2015-06-24 23:56:13 +00:00
|
|
|
|
2020-08-12 01:31:38 +00:00
|
|
|
int huge_pmd_unshare(struct mm_struct *mm, struct vm_area_struct *vma,
|
2022-06-21 23:56:19 +00:00
|
|
|
unsigned long addr, pte_t *ptep)
|
2015-06-24 23:56:13 +00:00
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
2018-10-05 22:51:29 +00:00
|
|
|
|
|
|
|
void adjust_range_if_pmd_sharing_possible(struct vm_area_struct *vma,
|
|
|
|
unsigned long *start, unsigned long *end)
|
|
|
|
{
|
|
|
|
}
|
2021-05-05 01:33:04 +00:00
|
|
|
|
|
|
|
bool want_pmd_share(struct vm_area_struct *vma, unsigned long addr)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
2024-07-26 15:07:27 +00:00
|
|
|
#endif /* CONFIG_HUGETLB_PMD_PAGE_TABLE_SHARING */
|
2013-04-23 11:35:02 +00:00
|
|
|
|
2013-04-30 07:02:03 +00:00
|
|
|
#ifdef CONFIG_ARCH_WANT_GENERAL_HUGETLB
|
2021-05-05 01:33:00 +00:00
|
|
|
pte_t *huge_pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
|
2013-04-30 07:02:03 +00:00
|
|
|
unsigned long addr, unsigned long sz)
|
|
|
|
{
|
|
|
|
pgd_t *pgd;
|
2017-03-09 14:24:07 +00:00
|
|
|
p4d_t *p4d;
|
2013-04-30 07:02:03 +00:00
|
|
|
pud_t *pud;
|
|
|
|
pte_t *pte = NULL;
|
|
|
|
|
|
|
|
pgd = pgd_offset(mm, addr);
|
2017-11-30 00:11:30 +00:00
|
|
|
p4d = p4d_alloc(mm, pgd, addr);
|
|
|
|
if (!p4d)
|
|
|
|
return NULL;
|
2017-03-09 14:24:07 +00:00
|
|
|
pud = pud_alloc(mm, p4d, addr);
|
2013-04-30 07:02:03 +00:00
|
|
|
if (pud) {
|
|
|
|
if (sz == PUD_SIZE) {
|
|
|
|
pte = (pte_t *)pud;
|
|
|
|
} else {
|
|
|
|
BUG_ON(sz != PMD_SIZE);
|
2021-05-05 01:33:04 +00:00
|
|
|
if (want_pmd_share(vma, addr) && pud_none(*pud))
|
2021-05-05 01:33:00 +00:00
|
|
|
pte = huge_pmd_share(mm, vma, addr, pud);
|
2013-04-30 07:02:03 +00:00
|
|
|
else
|
|
|
|
pte = (pte_t *)pmd_alloc(mm, pud, addr);
|
|
|
|
}
|
|
|
|
}
|
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
The following crash happens for me when running the -mm selftests (below).
Specifically, it happens while running the uffd-stress subtests:
kernel BUG at mm/hugetlb.c:7249!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 3238 Comm: uffd-stress Not tainted 6.4.0-hubbard-github+ #109
Hardware name: ASUS X299-A/PRIME X299-A, BIOS 1503 08/03/2018
RIP: 0010:huge_pte_alloc+0x12c/0x1a0
...
Call Trace:
<TASK>
? __die_body+0x63/0xb0
? die+0x9f/0xc0
? do_trap+0xab/0x180
? huge_pte_alloc+0x12c/0x1a0
? do_error_trap+0xc6/0x110
? huge_pte_alloc+0x12c/0x1a0
? handle_invalid_op+0x2c/0x40
? huge_pte_alloc+0x12c/0x1a0
? exc_invalid_op+0x33/0x50
? asm_exc_invalid_op+0x16/0x20
? __pfx_put_prev_task_idle+0x10/0x10
? huge_pte_alloc+0x12c/0x1a0
hugetlb_fault+0x1a3/0x1120
? finish_task_switch+0xb3/0x2a0
? lock_is_held_type+0xdb/0x150
handle_mm_fault+0xb8a/0xd40
? find_vma+0x5d/0xa0
do_user_addr_fault+0x257/0x5d0
exc_page_fault+0x7b/0x1f0
asm_exc_page_fault+0x22/0x30
That happens because a BUG() statement in huge_pte_alloc() attempts to
check that a pte, if present, is a hugetlb pte, but it does so in a
non-lockless-safe manner that leads to a false BUG() report.
We got here due to a couple of bugs, each of which by itself was not quite
enough to cause a problem:
First of all, before commit c33c794828f2("mm: ptep_get() conversion"), the
BUG() statement in huge_pte_alloc() was itself fragile: it relied upon
compiler behavior to only read the pte once, despite using it twice in the
same conditional.
Next, commit c33c794828f2 ("mm: ptep_get() conversion") broke that
delicate situation, by causing all direct pte reads to be done via
READ_ONCE(). And so READ_ONCE() got called twice within the same BUG()
conditional, leading to comparing (potentially, occasionally) different
versions of the pte, and thus to false BUG() reports.
Fix this by taking a single snapshot of the pte before using it in the
BUG conditional.
Now, that commit is only partially to blame here but, people doing
bisections will invariably land there, so this will help them find a fix
for a real crash. And also, the previous behavior was unlikely to ever
expose this bug--it was fragile, yet not actually broken.
So that's why I chose this commit for the Fixes tag, rather than the
commit that created the original BUG() statement.
Link: https://lkml.kernel.org/r/20230701010442.2041858-1-jhubbard@nvidia.com
Fixes: c33c794828f2 ("mm: ptep_get() conversion")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: James Houghton <jthoughton@google.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-01 01:04:42 +00:00
|
|
|
|
|
|
|
if (pte) {
|
|
|
|
pte_t pteval = ptep_get_lockless(pte);
|
|
|
|
|
|
|
|
BUG_ON(pte_present(pteval) && !pte_huge(pteval));
|
|
|
|
}
|
2013-04-30 07:02:03 +00:00
|
|
|
|
|
|
|
return pte;
|
|
|
|
}
|
|
|
|
|
2017-09-06 23:21:01 +00:00
|
|
|
/*
|
|
|
|
* huge_pte_offset() - Walk the page table to resolve the hugepage
|
|
|
|
* entry at address @addr
|
|
|
|
*
|
mm/hugetlb: avoid unnecessary check on pud and pmd entry in huge_pte_offset
When huge_pte_offset() is called, the parameter sz can only be PUD_SIZE or
PMD_SIZE. If sz is PUD_SIZE and code can reach pud, then *pud must be
none, or normal hugetlb entry, or non-present (migration or hwpoisoned)
hugetlb entry, and we can directly return pud. When sz is PMD_SIZE, pud
must be none or present, and if code can reach pmd, we can directly return
pmd.
So after this patch the code is simplified by first check on the parameter
sz, and avoid unnecessary checks in current code. Same semantics of
existing code is maintained.
More details about relevant commits:
commit 9b19df292c66 ("mm/hugetlb.c: make huge_pte_offset() consistent
and document behaviour") changed the code path for pud and pmd handling,
see comments about why this patch intends to change it.
...
pud = pud_offset(p4d, addr);
if (sz != PUD_SIZE && pud_none(*pud)) // [1]
return NULL;
/* hugepage or swap? */
if (pud_huge(*pud) || !pud_present(*pud)) // [2]
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
if (sz != PMD_SIZE && pmd_none(*pmd)) // [3]
return NULL;
/* hugepage or swap? */
if (pmd_huge(*pmd) || !pmd_present(*pmd)) // [4]
return (pte_t *)pmd;
return NULL; // [5]
...
[1]: this is necessary, return NULL for sz == PMD_SIZE;
[2]: if sz == PUD_SIZE, all valid values of pud entry will cause return;
[3]: dead code, sz != PMD_SIZE never true;
[4]: all valid values of pmd entry will cause return;
[5]: dead code, because of check in [4].
Now, this patch combines [1] and [2] for pud, and combines [3], [4] and
[5] for pmd, so avoid unnecessary checks.
I don't try to catch any invalid values in page table entry, as that will
be checked by caller and avoid extra branch in this function. Also no
assert on sz must equal PUD_SIZE or PMD_SIZE, since this function only
call for hugetlb mapping.
For commit 3c1d7e6ccb64 ("mm/hugetlb: fix a addressing exception caused by
huge_pte_offset"), since we don't read the entry more than once now,
variable pud_entry and pmd_entry are not needed.
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Longpeng <longpeng2@huawei.com>
Link: http://lkml.kernel.org/r/1587794313-16849-1-git-send-email-lixinhai.lxh@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:00:53 +00:00
|
|
|
* Return: Pointer to page table entry (PUD or PMD) for
|
|
|
|
* address @addr, or NULL if a !p*d_present() entry is encountered and the
|
2017-09-06 23:21:01 +00:00
|
|
|
* size @sz doesn't match the hugepage size at this level of the page
|
|
|
|
* table.
|
|
|
|
*/
|
2017-07-06 22:39:42 +00:00
|
|
|
pte_t *huge_pte_offset(struct mm_struct *mm,
|
|
|
|
unsigned long addr, unsigned long sz)
|
2013-04-30 07:02:03 +00:00
|
|
|
{
|
|
|
|
pgd_t *pgd;
|
2017-03-09 14:24:07 +00:00
|
|
|
p4d_t *p4d;
|
mm/hugetlb: avoid unnecessary check on pud and pmd entry in huge_pte_offset
When huge_pte_offset() is called, the parameter sz can only be PUD_SIZE or
PMD_SIZE. If sz is PUD_SIZE and code can reach pud, then *pud must be
none, or normal hugetlb entry, or non-present (migration or hwpoisoned)
hugetlb entry, and we can directly return pud. When sz is PMD_SIZE, pud
must be none or present, and if code can reach pmd, we can directly return
pmd.
So after this patch the code is simplified by first check on the parameter
sz, and avoid unnecessary checks in current code. Same semantics of
existing code is maintained.
More details about relevant commits:
commit 9b19df292c66 ("mm/hugetlb.c: make huge_pte_offset() consistent
and document behaviour") changed the code path for pud and pmd handling,
see comments about why this patch intends to change it.
...
pud = pud_offset(p4d, addr);
if (sz != PUD_SIZE && pud_none(*pud)) // [1]
return NULL;
/* hugepage or swap? */
if (pud_huge(*pud) || !pud_present(*pud)) // [2]
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
if (sz != PMD_SIZE && pmd_none(*pmd)) // [3]
return NULL;
/* hugepage or swap? */
if (pmd_huge(*pmd) || !pmd_present(*pmd)) // [4]
return (pte_t *)pmd;
return NULL; // [5]
...
[1]: this is necessary, return NULL for sz == PMD_SIZE;
[2]: if sz == PUD_SIZE, all valid values of pud entry will cause return;
[3]: dead code, sz != PMD_SIZE never true;
[4]: all valid values of pmd entry will cause return;
[5]: dead code, because of check in [4].
Now, this patch combines [1] and [2] for pud, and combines [3], [4] and
[5] for pmd, so avoid unnecessary checks.
I don't try to catch any invalid values in page table entry, as that will
be checked by caller and avoid extra branch in this function. Also no
assert on sz must equal PUD_SIZE or PMD_SIZE, since this function only
call for hugetlb mapping.
For commit 3c1d7e6ccb64 ("mm/hugetlb: fix a addressing exception caused by
huge_pte_offset"), since we don't read the entry more than once now,
variable pud_entry and pmd_entry are not needed.
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Longpeng <longpeng2@huawei.com>
Link: http://lkml.kernel.org/r/1587794313-16849-1-git-send-email-lixinhai.lxh@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:00:53 +00:00
|
|
|
pud_t *pud;
|
|
|
|
pmd_t *pmd;
|
2013-04-30 07:02:03 +00:00
|
|
|
|
|
|
|
pgd = pgd_offset(mm, addr);
|
2017-03-09 14:24:07 +00:00
|
|
|
if (!pgd_present(*pgd))
|
|
|
|
return NULL;
|
|
|
|
p4d = p4d_offset(pgd, addr);
|
|
|
|
if (!p4d_present(*p4d))
|
|
|
|
return NULL;
|
2017-09-06 23:21:01 +00:00
|
|
|
|
2017-03-09 14:24:07 +00:00
|
|
|
pud = pud_offset(p4d, addr);
|
mm/hugetlb: avoid unnecessary check on pud and pmd entry in huge_pte_offset
When huge_pte_offset() is called, the parameter sz can only be PUD_SIZE or
PMD_SIZE. If sz is PUD_SIZE and code can reach pud, then *pud must be
none, or normal hugetlb entry, or non-present (migration or hwpoisoned)
hugetlb entry, and we can directly return pud. When sz is PMD_SIZE, pud
must be none or present, and if code can reach pmd, we can directly return
pmd.
So after this patch the code is simplified by first check on the parameter
sz, and avoid unnecessary checks in current code. Same semantics of
existing code is maintained.
More details about relevant commits:
commit 9b19df292c66 ("mm/hugetlb.c: make huge_pte_offset() consistent
and document behaviour") changed the code path for pud and pmd handling,
see comments about why this patch intends to change it.
...
pud = pud_offset(p4d, addr);
if (sz != PUD_SIZE && pud_none(*pud)) // [1]
return NULL;
/* hugepage or swap? */
if (pud_huge(*pud) || !pud_present(*pud)) // [2]
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
if (sz != PMD_SIZE && pmd_none(*pmd)) // [3]
return NULL;
/* hugepage or swap? */
if (pmd_huge(*pmd) || !pmd_present(*pmd)) // [4]
return (pte_t *)pmd;
return NULL; // [5]
...
[1]: this is necessary, return NULL for sz == PMD_SIZE;
[2]: if sz == PUD_SIZE, all valid values of pud entry will cause return;
[3]: dead code, sz != PMD_SIZE never true;
[4]: all valid values of pmd entry will cause return;
[5]: dead code, because of check in [4].
Now, this patch combines [1] and [2] for pud, and combines [3], [4] and
[5] for pmd, so avoid unnecessary checks.
I don't try to catch any invalid values in page table entry, as that will
be checked by caller and avoid extra branch in this function. Also no
assert on sz must equal PUD_SIZE or PMD_SIZE, since this function only
call for hugetlb mapping.
For commit 3c1d7e6ccb64 ("mm/hugetlb: fix a addressing exception caused by
huge_pte_offset"), since we don't read the entry more than once now,
variable pud_entry and pmd_entry are not needed.
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Longpeng <longpeng2@huawei.com>
Link: http://lkml.kernel.org/r/1587794313-16849-1-git-send-email-lixinhai.lxh@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:00:53 +00:00
|
|
|
if (sz == PUD_SIZE)
|
|
|
|
/* must be pud huge, non-present or none */
|
2017-03-09 14:24:07 +00:00
|
|
|
return (pte_t *)pud;
|
mm/hugetlb: avoid unnecessary check on pud and pmd entry in huge_pte_offset
When huge_pte_offset() is called, the parameter sz can only be PUD_SIZE or
PMD_SIZE. If sz is PUD_SIZE and code can reach pud, then *pud must be
none, or normal hugetlb entry, or non-present (migration or hwpoisoned)
hugetlb entry, and we can directly return pud. When sz is PMD_SIZE, pud
must be none or present, and if code can reach pmd, we can directly return
pmd.
So after this patch the code is simplified by first check on the parameter
sz, and avoid unnecessary checks in current code. Same semantics of
existing code is maintained.
More details about relevant commits:
commit 9b19df292c66 ("mm/hugetlb.c: make huge_pte_offset() consistent
and document behaviour") changed the code path for pud and pmd handling,
see comments about why this patch intends to change it.
...
pud = pud_offset(p4d, addr);
if (sz != PUD_SIZE && pud_none(*pud)) // [1]
return NULL;
/* hugepage or swap? */
if (pud_huge(*pud) || !pud_present(*pud)) // [2]
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
if (sz != PMD_SIZE && pmd_none(*pmd)) // [3]
return NULL;
/* hugepage or swap? */
if (pmd_huge(*pmd) || !pmd_present(*pmd)) // [4]
return (pte_t *)pmd;
return NULL; // [5]
...
[1]: this is necessary, return NULL for sz == PMD_SIZE;
[2]: if sz == PUD_SIZE, all valid values of pud entry will cause return;
[3]: dead code, sz != PMD_SIZE never true;
[4]: all valid values of pmd entry will cause return;
[5]: dead code, because of check in [4].
Now, this patch combines [1] and [2] for pud, and combines [3], [4] and
[5] for pmd, so avoid unnecessary checks.
I don't try to catch any invalid values in page table entry, as that will
be checked by caller and avoid extra branch in this function. Also no
assert on sz must equal PUD_SIZE or PMD_SIZE, since this function only
call for hugetlb mapping.
For commit 3c1d7e6ccb64 ("mm/hugetlb: fix a addressing exception caused by
huge_pte_offset"), since we don't read the entry more than once now,
variable pud_entry and pmd_entry are not needed.
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Longpeng <longpeng2@huawei.com>
Link: http://lkml.kernel.org/r/1587794313-16849-1-git-send-email-lixinhai.lxh@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:00:53 +00:00
|
|
|
if (!pud_present(*pud))
|
2017-09-06 23:21:01 +00:00
|
|
|
return NULL;
|
mm/hugetlb: avoid unnecessary check on pud and pmd entry in huge_pte_offset
When huge_pte_offset() is called, the parameter sz can only be PUD_SIZE or
PMD_SIZE. If sz is PUD_SIZE and code can reach pud, then *pud must be
none, or normal hugetlb entry, or non-present (migration or hwpoisoned)
hugetlb entry, and we can directly return pud. When sz is PMD_SIZE, pud
must be none or present, and if code can reach pmd, we can directly return
pmd.
So after this patch the code is simplified by first check on the parameter
sz, and avoid unnecessary checks in current code. Same semantics of
existing code is maintained.
More details about relevant commits:
commit 9b19df292c66 ("mm/hugetlb.c: make huge_pte_offset() consistent
and document behaviour") changed the code path for pud and pmd handling,
see comments about why this patch intends to change it.
...
pud = pud_offset(p4d, addr);
if (sz != PUD_SIZE && pud_none(*pud)) // [1]
return NULL;
/* hugepage or swap? */
if (pud_huge(*pud) || !pud_present(*pud)) // [2]
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
if (sz != PMD_SIZE && pmd_none(*pmd)) // [3]
return NULL;
/* hugepage or swap? */
if (pmd_huge(*pmd) || !pmd_present(*pmd)) // [4]
return (pte_t *)pmd;
return NULL; // [5]
...
[1]: this is necessary, return NULL for sz == PMD_SIZE;
[2]: if sz == PUD_SIZE, all valid values of pud entry will cause return;
[3]: dead code, sz != PMD_SIZE never true;
[4]: all valid values of pmd entry will cause return;
[5]: dead code, because of check in [4].
Now, this patch combines [1] and [2] for pud, and combines [3], [4] and
[5] for pmd, so avoid unnecessary checks.
I don't try to catch any invalid values in page table entry, as that will
be checked by caller and avoid extra branch in this function. Also no
assert on sz must equal PUD_SIZE or PMD_SIZE, since this function only
call for hugetlb mapping.
For commit 3c1d7e6ccb64 ("mm/hugetlb: fix a addressing exception caused by
huge_pte_offset"), since we don't read the entry more than once now,
variable pud_entry and pmd_entry are not needed.
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Longpeng <longpeng2@huawei.com>
Link: http://lkml.kernel.org/r/1587794313-16849-1-git-send-email-lixinhai.lxh@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:00:53 +00:00
|
|
|
/* must have a valid entry and size to go further */
|
2017-09-06 23:21:01 +00:00
|
|
|
|
mm/hugetlb: avoid unnecessary check on pud and pmd entry in huge_pte_offset
When huge_pte_offset() is called, the parameter sz can only be PUD_SIZE or
PMD_SIZE. If sz is PUD_SIZE and code can reach pud, then *pud must be
none, or normal hugetlb entry, or non-present (migration or hwpoisoned)
hugetlb entry, and we can directly return pud. When sz is PMD_SIZE, pud
must be none or present, and if code can reach pmd, we can directly return
pmd.
So after this patch the code is simplified by first check on the parameter
sz, and avoid unnecessary checks in current code. Same semantics of
existing code is maintained.
More details about relevant commits:
commit 9b19df292c66 ("mm/hugetlb.c: make huge_pte_offset() consistent
and document behaviour") changed the code path for pud and pmd handling,
see comments about why this patch intends to change it.
...
pud = pud_offset(p4d, addr);
if (sz != PUD_SIZE && pud_none(*pud)) // [1]
return NULL;
/* hugepage or swap? */
if (pud_huge(*pud) || !pud_present(*pud)) // [2]
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
if (sz != PMD_SIZE && pmd_none(*pmd)) // [3]
return NULL;
/* hugepage or swap? */
if (pmd_huge(*pmd) || !pmd_present(*pmd)) // [4]
return (pte_t *)pmd;
return NULL; // [5]
...
[1]: this is necessary, return NULL for sz == PMD_SIZE;
[2]: if sz == PUD_SIZE, all valid values of pud entry will cause return;
[3]: dead code, sz != PMD_SIZE never true;
[4]: all valid values of pmd entry will cause return;
[5]: dead code, because of check in [4].
Now, this patch combines [1] and [2] for pud, and combines [3], [4] and
[5] for pmd, so avoid unnecessary checks.
I don't try to catch any invalid values in page table entry, as that will
be checked by caller and avoid extra branch in this function. Also no
assert on sz must equal PUD_SIZE or PMD_SIZE, since this function only
call for hugetlb mapping.
For commit 3c1d7e6ccb64 ("mm/hugetlb: fix a addressing exception caused by
huge_pte_offset"), since we don't read the entry more than once now,
variable pud_entry and pmd_entry are not needed.
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Longpeng <longpeng2@huawei.com>
Link: http://lkml.kernel.org/r/1587794313-16849-1-git-send-email-lixinhai.lxh@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:00:53 +00:00
|
|
|
pmd = pmd_offset(pud, addr);
|
|
|
|
/* must be pmd huge, non-present or none */
|
|
|
|
return (pte_t *)pmd;
|
2013-04-30 07:02:03 +00:00
|
|
|
}
|
|
|
|
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
/*
|
|
|
|
* Return a mask that can be used to update an address to the last huge
|
|
|
|
* page in a page table page mapping size. Used to skip non-present
|
|
|
|
* page table entries when linearly scanning address ranges. Architectures
|
|
|
|
* with unique huge page to page table relationships can define their own
|
|
|
|
* version of this routine.
|
|
|
|
*/
|
|
|
|
unsigned long hugetlb_mask_last_page(struct hstate *h)
|
|
|
|
{
|
|
|
|
unsigned long hp_size = huge_page_size(h);
|
|
|
|
|
|
|
|
if (hp_size == PUD_SIZE)
|
|
|
|
return P4D_SIZE - PUD_SIZE;
|
|
|
|
else if (hp_size == PMD_SIZE)
|
|
|
|
return PUD_SIZE - PMD_SIZE;
|
|
|
|
else
|
|
|
|
return 0UL;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
/* See description above. Architectures can provide their own version. */
|
|
|
|
__weak unsigned long hugetlb_mask_last_page(struct hstate *h)
|
|
|
|
{
|
2024-07-26 15:07:27 +00:00
|
|
|
#ifdef CONFIG_HUGETLB_PMD_PAGE_TABLE_SHARING
|
2022-06-21 23:56:19 +00:00
|
|
|
if (huge_page_size(h) == PMD_SIZE)
|
|
|
|
return PUD_SIZE - PMD_SIZE;
|
|
|
|
#endif
|
hugetlb: skip to end of PT page mapping when pte not present
Patch series "hugetlb: speed up linear address scanning", v2.
At unmap, fork and remap time hugetlb address ranges are linearly scanned.
We can optimize these scans if the ranges are sparsely populated.
Also, enable page table "Lazy copy" for hugetlb at fork.
NOTE: Architectures not defining CONFIG_ARCH_WANT_GENERAL_HUGETLB need to
add an arch specific version hugetlb_mask_last_page() to take advantage of
sparse address scanning improvements. Baolin Wang added the routine for
arm64. Other architectures which could be optimized are: ia64, mips,
parisc, powerpc, s390, sh and sparc.
This patch (of 4):
HugeTLB address ranges are linearly scanned during fork, unmap and remap
operations. If a non-present entry is encountered, the code currently
continues to the next huge page aligned address. However, a non-present
entry implies that the page table page for that entry is not present.
Therefore, the linear scan can skip to the end of range mapped by the page
table page. This can speed operations on large sparsely populated hugetlb
mappings.
Create a new routine hugetlb_mask_last_page() that will return an address
mask. When the mask is ORed with an address, the result will be the
address of the last huge page mapped by the associated page table page.
Use this mask to update addresses in routines which linearly scan hugetlb
address ranges when a non-present pte is encountered.
hugetlb_mask_last_page is related to the implementation of huge_pte_offset
as hugetlb_mask_last_page is called when huge_pte_offset returns NULL.
This patch only provides a complete hugetlb_mask_last_page implementation
when CONFIG_ARCH_WANT_GENERAL_HUGETLB is defined. Architectures which
provide their own versions of huge_pte_offset can also provide their own
version of hugetlb_mask_last_page.
Link: https://lkml.kernel.org/r/20220621235620.291305-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220621235620.291305-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-21 23:56:17 +00:00
|
|
|
return 0UL;
|
|
|
|
}
|
|
|
|
|
mm/hugetlb: reduce arch dependent code around follow_huge_*
Currently we have many duplicates in definitions around
follow_huge_addr(), follow_huge_pmd(), and follow_huge_pud(), so this
patch tries to remove the m. The basic idea is to put the default
implementation for these functions in mm/hugetlb.c as weak symbols
(regardless of CONFIG_ARCH_WANT_GENERAL_HUGETL B), and to implement
arch-specific code only when the arch needs it.
For follow_huge_addr(), only powerpc and ia64 have their own
implementation, and in all other architectures this function just returns
ERR_PTR(-EINVAL). So this patch sets returning ERR_PTR(-EINVAL) as
default.
As for follow_huge_(pmd|pud)(), if (pmd|pud)_huge() is implemented to
always return 0 in your architecture (like in ia64 or sparc,) it's never
called (the callsite is optimized away) no matter how implemented it is.
So in such architectures, we don't need arch-specific implementation.
In some architecture (like mips, s390 and tile,) their current
arch-specific follow_huge_(pmd|pud)() are effectively identical with the
common code, so this patch lets these architecture use the common code.
One exception is metag, where pmd_huge() could return non-zero but it
expects follow_huge_pmd() to always return NULL. This means that we need
arch-specific implementation which returns NULL. This behavior looks
strange to me (because non-zero pmd_huge() implies that the architecture
supports PMD-based hugepage, so follow_huge_pmd() can/should return some
relevant value,) but that's beyond this cleanup patch, so let's keep it.
Justification of non-trivial changes:
- in s390, follow_huge_pmd() checks !MACHINE_HAS_HPAGE at first, and this
patch removes the check. This is OK because we can assume MACHINE_HAS_HPAGE
is true when follow_huge_pmd() can be called (note that pmd_huge() has
the same check and always returns 0 for !MACHINE_HAS_HPAGE.)
- in s390 and mips, we use HPAGE_MASK instead of PMD_MASK as done in common
code. This patch forces these archs use PMD_MASK, but it's OK because
they are identical in both archs.
In s390, both of HPAGE_SHIFT and PMD_SHIFT are 20.
In mips, HPAGE_SHIFT is defined as (PAGE_SHIFT + PAGE_SHIFT - 3) and
PMD_SHIFT is define as (PAGE_SHIFT + PAGE_SHIFT + PTE_ORDER - 3), but
PTE_ORDER is always 0, so these are identical.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 23:25:15 +00:00
|
|
|
#endif /* CONFIG_ARCH_WANT_GENERAL_HUGETLB */
|
|
|
|
|
2023-02-15 10:39:36 +00:00
|
|
|
bool isolate_hugetlb(struct folio *folio, struct list_head *list)
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:59 +00:00
|
|
|
{
|
2023-02-15 10:39:36 +00:00
|
|
|
bool ret = true;
|
2015-04-15 23:14:38 +00:00
|
|
|
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2023-01-13 22:30:50 +00:00
|
|
|
if (!folio_test_hugetlb(folio) ||
|
|
|
|
!folio_test_hugetlb_migratable(folio) ||
|
|
|
|
!folio_try_get(folio)) {
|
2023-02-15 10:39:36 +00:00
|
|
|
ret = false;
|
2015-04-15 23:14:38 +00:00
|
|
|
goto unlock;
|
|
|
|
}
|
2023-01-13 22:30:50 +00:00
|
|
|
folio_clear_hugetlb_migratable(folio);
|
|
|
|
list_move_tail(&folio->lru, list);
|
2015-04-15 23:14:38 +00:00
|
|
|
unlock:
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2015-04-15 23:14:38 +00:00
|
|
|
return ret;
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:59 +00:00
|
|
|
}
|
|
|
|
|
2023-01-18 17:40:39 +00:00
|
|
|
int get_hwpoison_hugetlb_folio(struct folio *folio, bool *hugetlb, bool unpoison)
|
2021-06-16 01:23:13 +00:00
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
*hugetlb = false;
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2023-01-18 17:40:39 +00:00
|
|
|
if (folio_test_hugetlb(folio)) {
|
2021-06-16 01:23:13 +00:00
|
|
|
*hugetlb = true;
|
2023-01-18 17:40:39 +00:00
|
|
|
if (folio_test_hugetlb_freed(folio))
|
2022-04-29 06:16:02 +00:00
|
|
|
ret = 0;
|
2023-01-18 17:40:39 +00:00
|
|
|
else if (folio_test_hugetlb_migratable(folio) || unpoison)
|
|
|
|
ret = folio_try_get(folio);
|
2021-06-29 02:43:17 +00:00
|
|
|
else
|
|
|
|
ret = -EBUSY;
|
2021-06-16 01:23:13 +00:00
|
|
|
}
|
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
mm,hwpoison,hugetlb,memory_hotplug: hotremove memory section with hwpoisoned hugepage
Patch series "mm, hwpoison: improve handling workload related to hugetlb
and memory_hotplug", v7.
This patchset tries to solve the issue among memory_hotplug, hugetlb and hwpoison.
In this patchset, memory hotplug handles hwpoison pages like below:
- hwpoison pages should not prevent memory hotremove,
- memory block with hwpoison pages should not be onlined.
This patch (of 4):
HWPoisoned page is not supposed to be accessed once marked, but currently
such accesses can happen during memory hotremove because
do_migrate_range() can be called before dissolve_free_huge_pages() is
called.
Clear HPageMigratable for hwpoisoned hugepages to prevent them from being
migrated. This should be done in hugetlb_lock to avoid race against
isolate_hugetlb().
get_hwpoison_huge_page() needs to have a flag to show it's called from
unpoison to take refcount of hwpoisoned hugepages, so add it.
[naoya.horiguchi@linux.dev: remove TestClearHPageMigratable and reduce to test and clear separately]
Link: https://lkml.kernel.org/r/20221025053559.GA2104800@ik1-406-35019.vs.sakura.ne.jp
Link: https://lkml.kernel.org/r/20221024062012.1520887-1-naoya.horiguchi@linux.dev
Link: https://lkml.kernel.org/r/20221024062012.1520887-2-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 06:20:09 +00:00
|
|
|
int get_huge_page_for_hwpoison(unsigned long pfn, int flags,
|
|
|
|
bool *migratable_cleared)
|
mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()
There is a race condition between memory_failure_hugetlb() and hugetlb
free/demotion, which causes setting PageHWPoison flag on the wrong page.
The one simple result is that wrong processes can be killed, but another
(more serious) one is that the actual error is left unhandled, so no one
prevents later access to it, and that might lead to more serious results
like consuming corrupted data.
Think about the below race window:
CPU 1 CPU 2
memory_failure_hugetlb
struct page *head = compound_head(p);
hugetlb page might be freed to
buddy, or even changed to another
compound page.
get_hwpoison_page -- page is not what we want now...
The current code first does prechecks roughly and then reconfirms after
taking refcount, but it's found that it makes code overly complicated,
so move the prechecks in a single hugetlb_lock range.
A newly introduced function, try_memory_failure_hugetlb(), always takes
hugetlb_lock (even for non-hugetlb pages). That can be improved, but
memory_failure() is rare in principle, so should not be a big problem.
Link: https://lkml.kernel.org/r/20220408135323.1559401-2-naoya.horiguchi@linux.dev
Fixes: 761ad8d7c7b5 ("mm: hwpoison: introduce memory_failure_hugetlb()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21 23:35:33 +00:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
spin_lock_irq(&hugetlb_lock);
|
mm,hwpoison,hugetlb,memory_hotplug: hotremove memory section with hwpoisoned hugepage
Patch series "mm, hwpoison: improve handling workload related to hugetlb
and memory_hotplug", v7.
This patchset tries to solve the issue among memory_hotplug, hugetlb and hwpoison.
In this patchset, memory hotplug handles hwpoison pages like below:
- hwpoison pages should not prevent memory hotremove,
- memory block with hwpoison pages should not be onlined.
This patch (of 4):
HWPoisoned page is not supposed to be accessed once marked, but currently
such accesses can happen during memory hotremove because
do_migrate_range() can be called before dissolve_free_huge_pages() is
called.
Clear HPageMigratable for hwpoisoned hugepages to prevent them from being
migrated. This should be done in hugetlb_lock to avoid race against
isolate_hugetlb().
get_hwpoison_huge_page() needs to have a flag to show it's called from
unpoison to take refcount of hwpoisoned hugepages, so add it.
[naoya.horiguchi@linux.dev: remove TestClearHPageMigratable and reduce to test and clear separately]
Link: https://lkml.kernel.org/r/20221025053559.GA2104800@ik1-406-35019.vs.sakura.ne.jp
Link: https://lkml.kernel.org/r/20221024062012.1520887-1-naoya.horiguchi@linux.dev
Link: https://lkml.kernel.org/r/20221024062012.1520887-2-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 06:20:09 +00:00
|
|
|
ret = __get_huge_page_for_hwpoison(pfn, flags, migratable_cleared);
|
mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()
There is a race condition between memory_failure_hugetlb() and hugetlb
free/demotion, which causes setting PageHWPoison flag on the wrong page.
The one simple result is that wrong processes can be killed, but another
(more serious) one is that the actual error is left unhandled, so no one
prevents later access to it, and that might lead to more serious results
like consuming corrupted data.
Think about the below race window:
CPU 1 CPU 2
memory_failure_hugetlb
struct page *head = compound_head(p);
hugetlb page might be freed to
buddy, or even changed to another
compound page.
get_hwpoison_page -- page is not what we want now...
The current code first does prechecks roughly and then reconfirms after
taking refcount, but it's found that it makes code overly complicated,
so move the prechecks in a single hugetlb_lock range.
A newly introduced function, try_memory_failure_hugetlb(), always takes
hugetlb_lock (even for non-hugetlb pages). That can be improved, but
memory_failure() is rare in principle, so should not be a big problem.
Link: https://lkml.kernel.org/r/20220408135323.1559401-2-naoya.horiguchi@linux.dev
Fixes: 761ad8d7c7b5 ("mm: hwpoison: introduce memory_failure_hugetlb()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21 23:35:33 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2023-01-25 17:05:32 +00:00
|
|
|
void folio_putback_active_hugetlb(struct folio *folio)
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:59 +00:00
|
|
|
{
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2023-01-25 17:05:32 +00:00
|
|
|
folio_set_hugetlb_migratable(folio);
|
|
|
|
list_move_tail(&folio->lru, &(folio_hstate(folio))->hugepage_activelist);
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2023-01-25 17:05:32 +00:00
|
|
|
folio_put(folio);
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:59 +00:00
|
|
|
}
|
2018-02-01 00:20:48 +00:00
|
|
|
|
2022-11-01 22:30:59 +00:00
|
|
|
void move_hugetlb_state(struct folio *old_folio, struct folio *new_folio, int reason)
|
2018-02-01 00:20:48 +00:00
|
|
|
{
|
2022-11-01 22:30:59 +00:00
|
|
|
struct hstate *h = folio_hstate(old_folio);
|
2018-02-01 00:20:48 +00:00
|
|
|
|
2022-11-01 22:30:59 +00:00
|
|
|
hugetlb_cgroup_migrate(old_folio, new_folio);
|
|
|
|
set_page_owner_migrate_reason(&new_folio->page, reason);
|
2018-02-01 00:20:48 +00:00
|
|
|
|
|
|
|
/*
|
2022-11-01 22:30:59 +00:00
|
|
|
* transfer temporary state of the new hugetlb folio. This is
|
2018-02-01 00:20:48 +00:00
|
|
|
* reverse to other transitions because the newpage is going to
|
|
|
|
* be final while the old one will be freed so it takes over
|
|
|
|
* the temporary status.
|
|
|
|
*
|
|
|
|
* Also note that we have to transfer the per-node surplus state
|
|
|
|
* here as well otherwise the global surplus count will not match
|
|
|
|
* the per-node's.
|
|
|
|
*/
|
2022-11-01 22:30:59 +00:00
|
|
|
if (folio_test_hugetlb_temporary(new_folio)) {
|
|
|
|
int old_nid = folio_nid(old_folio);
|
|
|
|
int new_nid = folio_nid(new_folio);
|
|
|
|
|
|
|
|
folio_set_hugetlb_temporary(old_folio);
|
|
|
|
folio_clear_hugetlb_temporary(new_folio);
|
2018-02-01 00:20:48 +00:00
|
|
|
|
|
|
|
|
2021-05-05 01:33:25 +00:00
|
|
|
/*
|
|
|
|
* There is no need to transfer the per-node surplus state
|
|
|
|
* when we do not cross the node.
|
|
|
|
*/
|
|
|
|
if (new_nid == old_nid)
|
|
|
|
return;
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_lock_irq(&hugetlb_lock);
|
2018-02-01 00:20:48 +00:00
|
|
|
if (h->surplus_huge_pages_node[old_nid]) {
|
|
|
|
h->surplus_huge_pages_node[old_nid]--;
|
|
|
|
h->surplus_huge_pages_node[new_nid]++;
|
|
|
|
}
|
2021-05-05 01:35:07 +00:00
|
|
|
spin_unlock_irq(&hugetlb_lock);
|
2018-02-01 00:20:48 +00:00
|
|
|
}
|
|
|
|
}
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
|
2023-01-04 23:19:10 +00:00
|
|
|
static void hugetlb_unshare_pmds(struct vm_area_struct *vma,
|
|
|
|
unsigned long start,
|
|
|
|
unsigned long end)
|
2021-05-05 01:33:13 +00:00
|
|
|
{
|
|
|
|
struct hstate *h = hstate_vma(vma);
|
|
|
|
unsigned long sz = huge_page_size(h);
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
struct mmu_notifier_range range;
|
2023-01-04 23:19:10 +00:00
|
|
|
unsigned long address;
|
2021-05-05 01:33:13 +00:00
|
|
|
spinlock_t *ptl;
|
|
|
|
pte_t *ptep;
|
|
|
|
|
|
|
|
if (!(vma->vm_flags & VM_MAYSHARE))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (start >= end)
|
|
|
|
return;
|
|
|
|
|
2022-04-29 21:36:58 +00:00
|
|
|
flush_cache_range(vma, start, end);
|
2021-05-05 01:33:13 +00:00
|
|
|
/*
|
|
|
|
* No need to call adjust_range_if_pmd_sharing_possible(), because
|
|
|
|
* we have already done the PUD_SIZE alignment.
|
|
|
|
*/
|
2023-01-10 02:57:22 +00:00
|
|
|
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, mm,
|
2021-05-05 01:33:13 +00:00
|
|
|
start, end);
|
|
|
|
mmu_notifier_invalidate_range_start(&range);
|
2022-09-14 22:18:09 +00:00
|
|
|
hugetlb_vma_lock_write(vma);
|
2021-05-05 01:33:13 +00:00
|
|
|
i_mmap_lock_write(vma->vm_file->f_mapping);
|
|
|
|
for (address = start; address < end; address += PUD_SIZE) {
|
2022-12-16 15:52:29 +00:00
|
|
|
ptep = hugetlb_walk(vma, address, sz);
|
2021-05-05 01:33:13 +00:00
|
|
|
if (!ptep)
|
|
|
|
continue;
|
|
|
|
ptl = huge_pte_lock(h, mm, ptep);
|
2022-06-21 23:56:19 +00:00
|
|
|
huge_pmd_unshare(mm, vma, address, ptep);
|
2021-05-05 01:33:13 +00:00
|
|
|
spin_unlock(ptl);
|
|
|
|
}
|
|
|
|
flush_hugetlb_tlb_range(vma, start, end);
|
|
|
|
i_mmap_unlock_write(vma->vm_file->f_mapping);
|
2022-09-14 22:18:09 +00:00
|
|
|
hugetlb_vma_unlock_write(vma);
|
2021-05-05 01:33:13 +00:00
|
|
|
/*
|
2023-07-25 13:42:07 +00:00
|
|
|
* No need to call mmu_notifier_arch_invalidate_secondary_tlbs(), see
|
2022-06-27 06:00:26 +00:00
|
|
|
* Documentation/mm/mmu_notifier.rst.
|
2021-05-05 01:33:13 +00:00
|
|
|
*/
|
|
|
|
mmu_notifier_invalidate_range_end(&range);
|
|
|
|
}
|
|
|
|
|
2023-01-04 23:19:10 +00:00
|
|
|
/*
|
|
|
|
* This function will unconditionally remove all the shared pmd pgtable entries
|
|
|
|
* within the specific vma for a hugetlbfs memory range.
|
|
|
|
*/
|
|
|
|
void hugetlb_unshare_all_pmds(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
hugetlb_unshare_pmds(vma, ALIGN(vma->vm_start, PUD_SIZE),
|
|
|
|
ALIGN_DOWN(vma->vm_end, PUD_SIZE));
|
|
|
|
}
|
|
|
|
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
#ifdef CONFIG_CMA
|
|
|
|
static bool cma_reserve_called __initdata;
|
|
|
|
|
|
|
|
static int __init cmdline_parse_hugetlb_cma(char *p)
|
|
|
|
{
|
hugetlb: support node specified when using cma for gigantic hugepages
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:46 +00:00
|
|
|
int nid, count = 0;
|
|
|
|
unsigned long tmp;
|
|
|
|
char *s = p;
|
|
|
|
|
|
|
|
while (*s) {
|
|
|
|
if (sscanf(s, "%lu%n", &tmp, &count) != 1)
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (s[count] == ':') {
|
2022-03-22 21:45:20 +00:00
|
|
|
if (tmp >= MAX_NUMNODES)
|
hugetlb: support node specified when using cma for gigantic hugepages
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:46 +00:00
|
|
|
break;
|
2022-03-22 21:45:20 +00:00
|
|
|
nid = array_index_nospec(tmp, MAX_NUMNODES);
|
hugetlb: support node specified when using cma for gigantic hugepages
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:46 +00:00
|
|
|
|
|
|
|
s += count + 1;
|
|
|
|
tmp = memparse(s, &s);
|
|
|
|
hugetlb_cma_size_in_node[nid] = tmp;
|
|
|
|
hugetlb_cma_size += tmp;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Skip the separator if have one, otherwise
|
|
|
|
* break the parsing.
|
|
|
|
*/
|
|
|
|
if (*s == ',')
|
|
|
|
s++;
|
|
|
|
else
|
|
|
|
break;
|
|
|
|
} else {
|
|
|
|
hugetlb_cma_size = memparse(p, &p);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
early_param("hugetlb_cma", cmdline_parse_hugetlb_cma);
|
|
|
|
|
|
|
|
void __init hugetlb_cma_reserve(int order)
|
|
|
|
{
|
|
|
|
unsigned long size, reserved, per_node;
|
hugetlb: support node specified when using cma for gigantic hugepages
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:46 +00:00
|
|
|
bool node_specific_cma_alloc = false;
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
int nid;
|
|
|
|
|
2024-02-09 05:42:21 +00:00
|
|
|
/*
|
|
|
|
* HugeTLB CMA reservation is required for gigantic
|
|
|
|
* huge pages which could not be allocated via the
|
|
|
|
* page allocator. Just warn if there is any change
|
|
|
|
* breaking this assumption.
|
|
|
|
*/
|
|
|
|
VM_WARN_ON(order <= MAX_PAGE_ORDER);
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
cma_reserve_called = true;
|
|
|
|
|
hugetlb: support node specified when using cma for gigantic hugepages
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:46 +00:00
|
|
|
if (!hugetlb_cma_size)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (nid = 0; nid < MAX_NUMNODES; nid++) {
|
|
|
|
if (hugetlb_cma_size_in_node[nid] == 0)
|
|
|
|
continue;
|
|
|
|
|
2022-04-29 21:36:58 +00:00
|
|
|
if (!node_online(nid)) {
|
hugetlb: support node specified when using cma for gigantic hugepages
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:46 +00:00
|
|
|
pr_warn("hugetlb_cma: invalid node %d specified\n", nid);
|
|
|
|
hugetlb_cma_size -= hugetlb_cma_size_in_node[nid];
|
|
|
|
hugetlb_cma_size_in_node[nid] = 0;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (hugetlb_cma_size_in_node[nid] < (PAGE_SIZE << order)) {
|
|
|
|
pr_warn("hugetlb_cma: cma area of node %d should be at least %lu MiB\n",
|
|
|
|
nid, (PAGE_SIZE << order) / SZ_1M);
|
|
|
|
hugetlb_cma_size -= hugetlb_cma_size_in_node[nid];
|
|
|
|
hugetlb_cma_size_in_node[nid] = 0;
|
|
|
|
} else {
|
|
|
|
node_specific_cma_alloc = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Validate the CMA size again in case some invalid nodes specified. */
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
if (!hugetlb_cma_size)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (hugetlb_cma_size < (PAGE_SIZE << order)) {
|
|
|
|
pr_warn("hugetlb_cma: cma area should be at least %lu MiB\n",
|
|
|
|
(PAGE_SIZE << order) / SZ_1M);
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
hugetlb_cma_size = 0;
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
hugetlb: support node specified when using cma for gigantic hugepages
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:46 +00:00
|
|
|
if (!node_specific_cma_alloc) {
|
|
|
|
/*
|
|
|
|
* If 3 GB area is requested on a machine with 4 numa nodes,
|
|
|
|
* let's allocate 1 GB on first three nodes and ignore the last one.
|
|
|
|
*/
|
|
|
|
per_node = DIV_ROUND_UP(hugetlb_cma_size, nr_online_nodes);
|
|
|
|
pr_info("hugetlb_cma: reserve %lu MiB, up to %lu MiB per node\n",
|
|
|
|
hugetlb_cma_size / SZ_1M, per_node / SZ_1M);
|
|
|
|
}
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
|
|
|
|
reserved = 0;
|
2022-04-29 21:36:58 +00:00
|
|
|
for_each_online_node(nid) {
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
int res;
|
2020-08-23 23:03:09 +00:00
|
|
|
char name[CMA_MAX_NAME];
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
|
hugetlb: support node specified when using cma for gigantic hugepages
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:46 +00:00
|
|
|
if (node_specific_cma_alloc) {
|
|
|
|
if (hugetlb_cma_size_in_node[nid] == 0)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
size = hugetlb_cma_size_in_node[nid];
|
|
|
|
} else {
|
|
|
|
size = min(per_node, hugetlb_cma_size - reserved);
|
|
|
|
}
|
|
|
|
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
size = round_up(size, PAGE_SIZE << order);
|
|
|
|
|
2020-08-23 23:03:09 +00:00
|
|
|
snprintf(name, sizeof(name), "hugetlb%d", nid);
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
/*
|
|
|
|
* Note that 'order per bit' is based on smallest size that
|
|
|
|
* may be returned to CMA allocator in the case of
|
|
|
|
* huge page demotion.
|
|
|
|
*/
|
|
|
|
res = cma_declare_contiguous_nid(0, size, 0,
|
2024-04-30 16:14:37 +00:00
|
|
|
PAGE_SIZE << order,
|
mm/hugetlb: pass correct order_per_bit to cma_declare_contiguous_nid
The hugetlb_cma code passes 0 in the order_per_bit argument to
cma_declare_contiguous_nid (the alignment, computed using the page order,
is correctly passed in).
This causes a bit in the cma allocation bitmap to always represent a 4k
page, making the bitmaps potentially very large, and slower.
It would create bitmaps that would be pretty big. E.g. for a 4k page
size on x86, hugetlb_cma=64G would mean a bitmap size of (64G / 4k) / 8
== 2M. With HUGETLB_PAGE_ORDER as order_per_bit, as intended, this
would be (64G / 2M) / 8 == 4k. So, that's quite a difference.
Also, this restricted the hugetlb_cma area to ((PAGE_SIZE <<
MAX_PAGE_ORDER) * 8) * PAGE_SIZE (e.g. 128G on x86) , since
bitmap_alloc uses normal page allocation, and is thus restricted by
MAX_PAGE_ORDER. Specifying anything about that would fail the CMA
initialization.
So, correctly pass in the order instead.
Link: https://lkml.kernel.org/r/20240404162515.527802-2-fvdl@google.com
Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Frank van der Linden <fvdl@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-04 16:25:15 +00:00
|
|
|
HUGETLB_PAGE_ORDER, false, name,
|
|
|
|
&hugetlb_cma[nid], nid);
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
if (res) {
|
|
|
|
pr_warn("hugetlb_cma: reservation failed: err %d, node %d",
|
|
|
|
res, nid);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
reserved += size;
|
|
|
|
pr_info("hugetlb_cma: reserved %lu MiB on node %d\n",
|
|
|
|
size / SZ_1M, nid);
|
|
|
|
|
|
|
|
if (reserved >= hugetlb_cma_size)
|
|
|
|
break;
|
|
|
|
}
|
hugetlb: be sure to free demoted CMA pages to CMA
When huge page demotion is fully implemented, gigantic pages can be
demoted to a smaller huge page size. For example, on x86 a 1G page can
be demoted to 512 2M pages. However, gigantic pages can potentially be
allocated from CMA. If a gigantic page which was allocated from CMA is
demoted, the corresponding demoted pages needs to be returned to CMA.
Use the new interface cma_pages_valid() to determine if a non-gigantic
hugetlb page should be freed to CMA. Also, clear mapping field of these
pages as expected by cma_release.
This also requires a change to CMA region creation for gigantic pages.
CMA uses a per-region bit map to track allocations. When setting up the
region, you specify how many pages each bit represents. Currently, only
gigantic pages are allocated/freed from CMA so the region is set up such
that one bit represents a gigantic page size allocation.
With demote, a gigantic page (allocation) could be split into smaller
size pages. And, these smaller size pages will be freed to CMA. So,
since the per-region bit map needs to be set up to represent the
smallest allocation/free size, it now needs to be set to the smallest
huge page size which can be freed to CMA.
Unfortunately, we set up the CMA region for huge pages before we set up
huge pages sizes (hstates). So, technically we do not know the smallest
huge page size as this can change via command line options and
architecture specific code. Therefore, at region setup time we use
HUGETLB_PAGE_ORDER as the smallest possible huge page size that can be
given back to CMA. It is possible that this value is sub-optimal for
some architectures/config options. If needed, this can be addressed in
follow on work.
Link: https://lkml.kernel.org/r/20211007181918.136982-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:41:27 +00:00
|
|
|
|
|
|
|
if (!reserved)
|
|
|
|
/*
|
|
|
|
* hugetlb_cma_size is used to determine if allocations from
|
|
|
|
* cma are possible. Set to zero if no cma regions are set up.
|
|
|
|
*/
|
|
|
|
hugetlb_cma_size = 0;
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
}
|
|
|
|
|
2022-09-01 12:00:21 +00:00
|
|
|
static void __init hugetlb_cma_check(void)
|
mm: hugetlb: optionally allocate gigantic hugepages using cma
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10 21:32:45 +00:00
|
|
|
{
|
|
|
|
if (!hugetlb_cma_size || cma_reserve_called)
|
|
|
|
return;
|
|
|
|
|
|
|
|
pr_warn("hugetlb_cma: the option isn't supported by current arch\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* CONFIG_CMA */
|