2005-11-09 05:37:07 +00:00
|
|
|
/*
|
2005-11-09 05:38:25 +00:00
|
|
|
em28xx-video.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2005-11-09 05:38:25 +00:00
|
|
|
Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
|
|
|
|
Markus Rechberger <mrechberger@gmail.com>
|
2006-04-03 10:53:40 +00:00
|
|
|
Mauro Carvalho Chehab <mchehab@infradead.org>
|
2005-11-09 05:38:25 +00:00
|
|
|
Sascha Sommer <saschasommer@freenet.de>
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2006-01-23 19:10:54 +00:00
|
|
|
Some parts based on SN9C10x PC Camera Controllers GPL driver made
|
|
|
|
by Luca Risolia <luca.risolia@studio.unibo.it>
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program; if not, write to the Free Software
|
|
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
2006-01-23 19:11:08 +00:00
|
|
|
#include <linux/bitmap.h>
|
2005-11-09 05:37:07 +00:00
|
|
|
#include <linux/usb.h>
|
|
|
|
#include <linux/i2c.h>
|
2005-11-09 05:38:37 +00:00
|
|
|
#include <linux/version.h>
|
2007-11-01 04:16:09 +00:00
|
|
|
#include <linux/mm.h>
|
2006-01-15 09:52:23 +00:00
|
|
|
#include <linux/mutex.h>
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2005-11-09 05:38:25 +00:00
|
|
|
#include "em28xx.h"
|
2006-01-09 17:25:14 +00:00
|
|
|
#include <media/v4l2-common.h>
|
2006-03-19 15:35:57 +00:00
|
|
|
#include <media/msp3400.h>
|
V4L/DVB (7060): em28xx: remove has_tuner
has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT
means the same thing.
Having two ways to say that a tuner is not present is
not nice, since it may lead to bad setups. In fact, with the previous
code, if a device were using has_tuner=0, but the user forces a tuner,
with modprobe option tuner=type, the modprobe option won't work.
Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent.
So, with the previous logic, in this case, the driver should set
has_tuner=0, or has_tuner=1 otherwise.
Instead of adding several additional tests and setups, better just to
remove .has_tuner.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-24 09:59:20 +00:00
|
|
|
#include <media/tuner.h>
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2005-11-09 05:38:25 +00:00
|
|
|
#define DRIVER_AUTHOR "Ludovico Cavedon <cavedon@sssup.it>, " \
|
|
|
|
"Markus Rechberger <mrechberger@gmail.com>, " \
|
2006-04-03 10:53:40 +00:00
|
|
|
"Mauro Carvalho Chehab <mchehab@infradead.org>, " \
|
2005-11-09 05:38:25 +00:00
|
|
|
"Sascha Sommer <saschasommer@freenet.de>"
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2005-11-09 05:38:25 +00:00
|
|
|
#define DRIVER_NAME "em28xx"
|
|
|
|
#define DRIVER_DESC "Empia em28xx based USB video device driver"
|
2007-11-11 16:17:17 +00:00
|
|
|
#define EM28XX_VERSION_CODE KERNEL_VERSION(0, 1, 0)
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
#define em28xx_videodbg(fmt, arg...) do {\
|
2005-11-09 05:37:43 +00:00
|
|
|
if (video_debug) \
|
|
|
|
printk(KERN_INFO "%s %s :"fmt, \
|
2008-04-09 02:20:00 +00:00
|
|
|
dev->name, __func__ , ##arg); } while (0)
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
static unsigned int isoc_debug;
|
2008-04-13 17:41:23 +00:00
|
|
|
module_param(isoc_debug, int, 0644);
|
|
|
|
MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]");
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
#define em28xx_isocdbg(fmt, arg...) do {\
|
|
|
|
if (isoc_debug) \
|
|
|
|
printk(KERN_INFO "%s %s :"fmt, \
|
2008-04-13 17:41:23 +00:00
|
|
|
dev->name, __func__ , ##arg); } while (0)
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
/* Limits minimum and default number of buffers */
|
|
|
|
#define EM28XX_MIN_BUF 4
|
|
|
|
#define EM28XX_DEF_BUF 8
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
static LIST_HEAD(em28xx_devlist);
|
2005-11-09 05:37:52 +00:00
|
|
|
|
2005-11-09 05:38:52 +00:00
|
|
|
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
|
2006-01-23 19:11:08 +00:00
|
|
|
static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
|
2008-01-05 20:22:01 +00:00
|
|
|
static unsigned int vbi_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
|
|
|
|
static unsigned int radio_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
|
|
|
|
|
2005-11-09 05:37:24 +00:00
|
|
|
module_param_array(card, int, NULL, 0444);
|
2006-01-23 19:11:08 +00:00
|
|
|
module_param_array(video_nr, int, NULL, 0444);
|
|
|
|
module_param_array(vbi_nr, int, NULL, 0444);
|
2008-01-05 20:22:01 +00:00
|
|
|
module_param_array(radio_nr, int, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(card, "card type");
|
|
|
|
MODULE_PARM_DESC(video_nr, "video device numbers");
|
|
|
|
MODULE_PARM_DESC(vbi_nr, "vbi device numbers");
|
|
|
|
MODULE_PARM_DESC(radio_nr, "radio device numbers");
|
2005-11-09 05:37:24 +00:00
|
|
|
|
2008-04-22 17:41:48 +00:00
|
|
|
static unsigned int video_debug;
|
2005-11-09 05:37:07 +00:00
|
|
|
module_param(video_debug,int,0644);
|
|
|
|
MODULE_PARM_DESC(video_debug,"enable debug messages [video]");
|
|
|
|
|
2006-01-23 19:11:08 +00:00
|
|
|
/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
|
|
|
|
static unsigned long em28xx_devused;
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
/* supported controls */
|
2006-01-09 17:25:14 +00:00
|
|
|
/* Common to all boards */
|
2005-11-09 05:38:27 +00:00
|
|
|
static struct v4l2_queryctrl em28xx_qctrl[] = {
|
2006-01-09 17:25:14 +00:00
|
|
|
{
|
|
|
|
.id = V4L2_CID_AUDIO_VOLUME,
|
|
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
|
|
.name = "Volume",
|
|
|
|
.minimum = 0x0,
|
|
|
|
.maximum = 0x1f,
|
|
|
|
.step = 0x1,
|
|
|
|
.default_value = 0x1f,
|
|
|
|
.flags = 0,
|
|
|
|
},{
|
|
|
|
.id = V4L2_CID_AUDIO_MUTE,
|
|
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
|
|
.name = "Mute",
|
|
|
|
.minimum = 0,
|
|
|
|
.maximum = 1,
|
|
|
|
.step = 1,
|
|
|
|
.default_value = 1,
|
|
|
|
.flags = 0,
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
static struct usb_driver em28xx_usb_driver;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
/* ------------------------------------------------------------------
|
|
|
|
DMA and thread functions
|
|
|
|
------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Announces that a buffer were filled and request the next
|
|
|
|
*/
|
2008-04-13 17:41:23 +00:00
|
|
|
static inline void buffer_filled(struct em28xx *dev,
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
struct em28xx_dmaqueue *dma_q,
|
|
|
|
struct em28xx_buffer *buf)
|
|
|
|
{
|
|
|
|
/* Advice that buffer was filled */
|
|
|
|
em28xx_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i);
|
|
|
|
buf->vb.state = VIDEOBUF_DONE;
|
|
|
|
buf->vb.field_count++;
|
|
|
|
do_gettimeofday(&buf->vb.ts);
|
|
|
|
|
|
|
|
list_del(&buf->vb.queue);
|
|
|
|
wake_up(&buf->vb.done);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Identify the buffer header type and properly handles
|
|
|
|
*/
|
|
|
|
static void em28xx_copy_video(struct em28xx *dev,
|
|
|
|
struct em28xx_dmaqueue *dma_q,
|
|
|
|
struct em28xx_buffer *buf,
|
|
|
|
unsigned char *p,
|
|
|
|
unsigned char *outp, unsigned long len)
|
|
|
|
{
|
|
|
|
void *fieldstart, *startwrite, *startread;
|
2008-04-13 17:41:23 +00:00
|
|
|
int linesdone, currlinedone, offset, lencopy, remain;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
if (dev->frame_size != buf->vb.size) {
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
em28xx_errdev("size %i and buf.length %lu are different!\n",
|
2008-04-13 17:56:25 +00:00
|
|
|
dev->frame_size, buf->vb.size);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dma_q->pos + len > buf->vb.size)
|
|
|
|
len = buf->vb.size - dma_q->pos;
|
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
if (p[0] != 0x88 && p[0] != 0x22) {
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
em28xx_isocdbg("frame is not complete\n");
|
|
|
|
len += 4;
|
|
|
|
} else
|
2008-04-13 17:41:23 +00:00
|
|
|
p += 4;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
startread = p;
|
|
|
|
remain = len;
|
|
|
|
|
|
|
|
/* Interlaces frame */
|
|
|
|
if (buf->top_field)
|
|
|
|
fieldstart = outp;
|
|
|
|
else
|
|
|
|
fieldstart = outp + dev->bytesperline;
|
|
|
|
|
|
|
|
linesdone = dma_q->pos / dev->bytesperline;
|
|
|
|
currlinedone = dma_q->pos % dev->bytesperline;
|
|
|
|
offset = linesdone * dev->bytesperline * 2 + currlinedone;
|
|
|
|
startwrite = fieldstart + offset;
|
|
|
|
lencopy = dev->bytesperline - currlinedone;
|
|
|
|
lencopy = lencopy > remain ? remain : lencopy;
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) {
|
2008-04-13 17:39:29 +00:00
|
|
|
em28xx_isocdbg("Overflow of %zi bytes past buffer end (1)\n",
|
2008-04-13 17:41:23 +00:00
|
|
|
((char *)startwrite + lencopy) -
|
|
|
|
((char *)outp + buf->vb.size));
|
|
|
|
lencopy = remain = (char *)outp + buf->vb.size - (char *)startwrite;
|
2008-04-13 17:38:47 +00:00
|
|
|
}
|
2008-04-13 17:56:02 +00:00
|
|
|
if (lencopy <= 0)
|
|
|
|
return;
|
2008-04-13 17:38:47 +00:00
|
|
|
memcpy(startwrite, startread, lencopy);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
remain -= lencopy;
|
|
|
|
|
|
|
|
while (remain > 0) {
|
|
|
|
startwrite += lencopy + dev->bytesperline;
|
|
|
|
startread += lencopy;
|
|
|
|
if (dev->bytesperline > remain)
|
|
|
|
lencopy = remain;
|
|
|
|
else
|
|
|
|
lencopy = dev->bytesperline;
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) {
|
2008-04-13 17:39:29 +00:00
|
|
|
em28xx_isocdbg("Overflow of %zi bytes past buffer end (2)\n",
|
2008-04-13 17:41:23 +00:00
|
|
|
((char *)startwrite + lencopy) -
|
|
|
|
((char *)outp + buf->vb.size));
|
|
|
|
lencopy = remain = (char *)outp + buf->vb.size -
|
|
|
|
(char *)startwrite;
|
2008-04-13 17:38:47 +00:00
|
|
|
}
|
2008-04-13 17:41:23 +00:00
|
|
|
if (lencopy <= 0)
|
|
|
|
break;
|
2008-04-13 17:38:47 +00:00
|
|
|
|
|
|
|
memcpy(startwrite, startread, lencopy);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
remain -= lencopy;
|
|
|
|
}
|
|
|
|
|
|
|
|
dma_q->pos += len;
|
|
|
|
}
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
static inline void print_err_status(struct em28xx *dev,
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
int packet, int status)
|
|
|
|
{
|
|
|
|
char *errmsg = "Unknown";
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
switch (status) {
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
case -ENOENT:
|
|
|
|
errmsg = "unlinked synchronuously";
|
|
|
|
break;
|
|
|
|
case -ECONNRESET:
|
|
|
|
errmsg = "unlinked asynchronuously";
|
|
|
|
break;
|
|
|
|
case -ENOSR:
|
|
|
|
errmsg = "Buffer error (overrun)";
|
|
|
|
break;
|
|
|
|
case -EPIPE:
|
|
|
|
errmsg = "Stalled (device not responding)";
|
|
|
|
break;
|
|
|
|
case -EOVERFLOW:
|
|
|
|
errmsg = "Babble (bad cable?)";
|
|
|
|
break;
|
|
|
|
case -EPROTO:
|
|
|
|
errmsg = "Bit-stuff error (bad cable?)";
|
|
|
|
break;
|
|
|
|
case -EILSEQ:
|
|
|
|
errmsg = "CRC/Timeout (could be anything)";
|
|
|
|
break;
|
|
|
|
case -ETIME:
|
|
|
|
errmsg = "Device does not respond";
|
|
|
|
break;
|
|
|
|
}
|
2008-04-13 17:41:23 +00:00
|
|
|
if (packet < 0) {
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
em28xx_isocdbg("URB status %d [%s].\n", status, errmsg);
|
|
|
|
} else {
|
|
|
|
em28xx_isocdbg("URB packet %d, status %d [%s].\n",
|
|
|
|
packet, status, errmsg);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* video-buf generic routine to get the next available buffer
|
|
|
|
*/
|
2008-04-13 17:41:23 +00:00
|
|
|
static inline int get_next_buf(struct em28xx_dmaqueue *dma_q,
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
struct em28xx_buffer **buf)
|
|
|
|
{
|
|
|
|
struct em28xx *dev = container_of(dma_q, struct em28xx, vidq);
|
|
|
|
|
|
|
|
if (list_empty(&dma_q->active)) {
|
|
|
|
em28xx_isocdbg("No active queue to serve\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
*buf = list_entry(dma_q->active.next, struct em28xx_buffer, vb.queue);
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Controls the isoc copy of each urb packet
|
|
|
|
*/
|
2008-04-13 17:38:47 +00:00
|
|
|
static inline int em28xx_isoc_copy(struct urb *urb)
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
{
|
2008-04-13 17:38:47 +00:00
|
|
|
struct em28xx_buffer *buf;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
struct em28xx_dmaqueue *dma_q = urb->context;
|
|
|
|
struct em28xx *dev = container_of(dma_q, struct em28xx, vidq);
|
2008-04-13 17:38:47 +00:00
|
|
|
unsigned char *outp;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
int i, len = 0, rc = 1;
|
2008-04-13 17:38:47 +00:00
|
|
|
unsigned char *p;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
if (!dev)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED))
|
|
|
|
return 0;
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
if (urb->status < 0) {
|
|
|
|
print_err_status(dev, -1, urb->status);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
if (urb->status == -ENOENT)
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
buf = dev->isoc_ctl.buf;
|
2008-04-13 17:38:47 +00:00
|
|
|
|
|
|
|
if (!buf) {
|
2008-04-13 17:41:23 +00:00
|
|
|
rc = get_next_buf(dma_q, &buf);
|
|
|
|
if (rc <= 0)
|
2008-04-13 17:38:47 +00:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
outp = videobuf_to_vmalloc(&buf->vb);
|
2008-04-13 17:38:47 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
for (i = 0; i < urb->number_of_packets; i++) {
|
|
|
|
int status = urb->iso_frame_desc[i].status;
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
if (status < 0) {
|
|
|
|
print_err_status(dev, i, status);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
if (urb->iso_frame_desc[i].status != -EPROTO)
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
len = urb->iso_frame_desc[i].actual_length - 4;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
if (urb->iso_frame_desc[i].actual_length <= 0) {
|
2008-04-13 17:38:47 +00:00
|
|
|
/* em28xx_isocdbg("packet %d is empty",i); - spammy */
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (urb->iso_frame_desc[i].actual_length >
|
|
|
|
dev->max_pkt_size) {
|
|
|
|
em28xx_isocdbg("packet bigger than packet size");
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
|
|
|
|
|
|
|
|
/* FIXME: incomplete buffer checks where removed to make
|
|
|
|
logic simpler. Impacts of those changes should be evaluated
|
|
|
|
*/
|
2008-04-13 17:38:47 +00:00
|
|
|
if (p[0] == 0x22 && p[1] == 0x5a) {
|
2008-04-13 17:56:25 +00:00
|
|
|
em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2],
|
|
|
|
len, (p[2] & 1)? "odd" : "even");
|
2008-04-13 17:38:47 +00:00
|
|
|
|
2008-04-13 17:56:02 +00:00
|
|
|
if (p[2] & 1)
|
|
|
|
buf->top_field = 0;
|
|
|
|
else {
|
2008-04-13 17:38:47 +00:00
|
|
|
if (buf->receiving) {
|
2008-04-13 17:41:23 +00:00
|
|
|
buffer_filled(dev, dma_q, buf);
|
|
|
|
rc = get_next_buf(dma_q, &buf);
|
|
|
|
if (rc <= 0)
|
2008-04-13 17:38:47 +00:00
|
|
|
return rc;
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
outp = videobuf_to_vmalloc(&buf->vb);
|
2008-04-13 17:38:47 +00:00
|
|
|
}
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
buf->top_field = 1;
|
2008-04-13 17:56:02 +00:00
|
|
|
}
|
2008-04-13 17:38:47 +00:00
|
|
|
buf->receiving = 1;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
dma_q->pos = 0;
|
2008-04-13 17:41:23 +00:00
|
|
|
} else if (p[0] == 0x33 && p[1] == 0x95 && p[2] == 0x00) {
|
2008-04-13 17:38:47 +00:00
|
|
|
em28xx_isocdbg("VBI HEADER!!!\n");
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
}
|
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
em28xx_copy_video(dev, dma_q, buf, p, outp, len);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
/* FIXME: Should add vbi copy */
|
|
|
|
}
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ------------------------------------------------------------------
|
|
|
|
URB control
|
|
|
|
------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IRQ callback, called by URB callback
|
|
|
|
*/
|
|
|
|
static void em28xx_irq_callback(struct urb *urb)
|
|
|
|
{
|
|
|
|
struct em28xx_dmaqueue *dma_q = urb->context;
|
|
|
|
struct em28xx *dev = container_of(dma_q, struct em28xx, vidq);
|
2008-04-13 17:41:23 +00:00
|
|
|
int rc, i;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
unsigned long flags;
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
spin_lock_irqsave(&dev->slock, flags);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
/* Copy data from URB */
|
2008-04-13 17:41:23 +00:00
|
|
|
rc = em28xx_isoc_copy(urb);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
/* Reset urb buffers */
|
|
|
|
for (i = 0; i < urb->number_of_packets; i++) {
|
|
|
|
urb->iso_frame_desc[i].status = 0;
|
|
|
|
urb->iso_frame_desc[i].actual_length = 0;
|
|
|
|
}
|
|
|
|
urb->status = 0;
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
|
|
|
|
if (urb->status) {
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
em28xx_err("urb resubmit failed (error=%i)\n",
|
|
|
|
urb->status);
|
|
|
|
}
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
spin_unlock_irqrestore(&dev->slock, flags);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Stop and Deallocate URBs
|
|
|
|
*/
|
|
|
|
static void em28xx_uninit_isoc(struct em28xx *dev)
|
|
|
|
{
|
|
|
|
struct urb *urb;
|
|
|
|
int i;
|
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
em28xx_isocdbg("em28xx: called em28xx_uninit_isoc\n");
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
dev->isoc_ctl.nfields = -1;
|
|
|
|
dev->isoc_ctl.buf = NULL;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
|
2008-04-13 17:41:23 +00:00
|
|
|
urb = dev->isoc_ctl.urb[i];
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
if (urb) {
|
|
|
|
usb_kill_urb(urb);
|
|
|
|
usb_unlink_urb(urb);
|
|
|
|
if (dev->isoc_ctl.transfer_buffer[i]) {
|
|
|
|
usb_buffer_free(dev->udev,
|
|
|
|
urb->transfer_buffer_length,
|
|
|
|
dev->isoc_ctl.transfer_buffer[i],
|
|
|
|
urb->transfer_dma);
|
|
|
|
}
|
|
|
|
usb_free_urb(urb);
|
|
|
|
dev->isoc_ctl.urb[i] = NULL;
|
|
|
|
}
|
|
|
|
dev->isoc_ctl.transfer_buffer[i] = NULL;
|
|
|
|
}
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
kfree(dev->isoc_ctl.urb);
|
|
|
|
kfree(dev->isoc_ctl.transfer_buffer);
|
|
|
|
dev->isoc_ctl.urb = NULL;
|
|
|
|
dev->isoc_ctl.transfer_buffer = NULL;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
dev->isoc_ctl.num_bufs = 0;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
2008-04-13 17:40:10 +00:00
|
|
|
em28xx_capture_start(dev, 0);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocate URBs and start IRQ
|
|
|
|
*/
|
|
|
|
static int em28xx_prepare_isoc(struct em28xx *dev, int max_packets,
|
|
|
|
int num_bufs)
|
|
|
|
{
|
|
|
|
struct em28xx_dmaqueue *dma_q = &dev->vidq;
|
|
|
|
int i;
|
|
|
|
int sb_size, pipe;
|
|
|
|
struct urb *urb;
|
|
|
|
int j, k;
|
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
em28xx_isocdbg("em28xx: called em28xx_prepare_isoc\n");
|
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
/* De-allocates all pending stuff */
|
|
|
|
em28xx_uninit_isoc(dev);
|
|
|
|
|
|
|
|
dev->isoc_ctl.num_bufs = num_bufs;
|
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
if (!dev->isoc_ctl.urb) {
|
|
|
|
em28xx_errdev("cannot alloc memory for usb buffers\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
GFP_KERNEL);
|
|
|
|
if (!dev->isoc_ctl.urb) {
|
|
|
|
em28xx_errdev("cannot allocate memory for usbtransfer\n");
|
|
|
|
kfree(dev->isoc_ctl.urb);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->isoc_ctl.max_pkt_size = dev->max_pkt_size;
|
|
|
|
|
|
|
|
sb_size = max_packets * dev->isoc_ctl.max_pkt_size;
|
|
|
|
|
|
|
|
/* allocate urbs and transfer buffers */
|
|
|
|
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
|
|
|
|
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
|
|
|
|
if (!urb) {
|
|
|
|
em28xx_err("cannot alloc isoc_ctl.urb %i\n", i);
|
|
|
|
em28xx_uninit_isoc(dev);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
dev->isoc_ctl.urb[i] = urb;
|
|
|
|
|
|
|
|
dev->isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->udev,
|
|
|
|
sb_size, GFP_KERNEL, &urb->transfer_dma);
|
|
|
|
if (!dev->isoc_ctl.transfer_buffer[i]) {
|
2008-04-13 17:41:23 +00:00
|
|
|
em28xx_err("unable to allocate %i bytes for transfer"
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
" buffer %i%s\n",
|
|
|
|
sb_size, i,
|
|
|
|
in_interrupt()?" while in int":"");
|
|
|
|
em28xx_uninit_isoc(dev);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size);
|
|
|
|
|
|
|
|
/* FIXME: this is a hack - should be
|
|
|
|
'desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK'
|
|
|
|
should also be using 'desc.bInterval'
|
|
|
|
*/
|
2008-04-13 17:41:23 +00:00
|
|
|
pipe = usb_rcvisocpipe(dev->udev, 0x82);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
usb_fill_int_urb(urb, dev->udev, pipe,
|
|
|
|
dev->isoc_ctl.transfer_buffer[i], sb_size,
|
|
|
|
em28xx_irq_callback, dma_q, 1);
|
|
|
|
|
|
|
|
urb->number_of_packets = max_packets;
|
|
|
|
urb->transfer_flags = URB_ISO_ASAP;
|
|
|
|
|
|
|
|
k = 0;
|
|
|
|
for (j = 0; j < max_packets; j++) {
|
|
|
|
urb->iso_frame_desc[j].offset = k;
|
|
|
|
urb->iso_frame_desc[j].length =
|
|
|
|
dev->isoc_ctl.max_pkt_size;
|
|
|
|
k += dev->isoc_ctl.max_pkt_size;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
static int em28xx_start_thread(struct em28xx_dmaqueue *dma_q)
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
{
|
|
|
|
struct em28xx *dev = container_of(dma_q, struct em28xx, vidq);
|
2008-04-13 17:41:23 +00:00
|
|
|
int i, rc = 0;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
em28xx_videodbg("Called em28xx_start_thread\n");
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
init_waitqueue_head(&dma_q->wq);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
2008-04-13 17:40:10 +00:00
|
|
|
em28xx_capture_start(dev, 1);
|
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
/* submit urbs and enables IRQ */
|
|
|
|
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
|
|
|
|
rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
|
|
|
|
if (rc) {
|
|
|
|
em28xx_err("submit of urb %i failed (error=%i)\n", i,
|
|
|
|
rc);
|
|
|
|
em28xx_uninit_isoc(dev);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
if (rc < 0)
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return rc;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ------------------------------------------------------------------
|
|
|
|
Videobuf operations
|
|
|
|
------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
static int
|
|
|
|
buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = vq->priv_data;
|
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
*size = 16 * fh->dev->width * fh->dev->height >> 3;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
if (0 == *count)
|
|
|
|
*count = EM28XX_DEF_BUF;
|
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
if (*count < EM28XX_MIN_BUF)
|
|
|
|
*count = EM28XX_MIN_BUF;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void free_buffer(struct videobuf_queue *vq, struct em28xx_buffer *buf)
|
|
|
|
{
|
|
|
|
if (in_interrupt())
|
|
|
|
BUG();
|
|
|
|
|
|
|
|
videobuf_waiton(&buf->vb, 0, 0);
|
|
|
|
videobuf_vmalloc_free(&buf->vb);
|
|
|
|
buf->vb.state = VIDEOBUF_NEEDS_INIT;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
|
|
|
|
enum v4l2_field field)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = vq->priv_data;
|
2008-04-13 17:41:23 +00:00
|
|
|
struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
struct em28xx *dev = fh->dev;
|
2008-04-13 17:38:47 +00:00
|
|
|
struct em28xx_dmaqueue *vidq = &dev->vidq;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
int rc = 0, urb_init = 0;
|
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
/* BUG_ON(NULL == fh->fmt); */
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
/* FIXME: It assumes depth = 16 */
|
|
|
|
/* The only currently supported format is 16 bits/pixel */
|
2008-04-13 17:38:47 +00:00
|
|
|
buf->vb.size = 16 * dev->width * dev->height >> 3;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2008-04-13 17:57:01 +00:00
|
|
|
buf->fmt = fh->fmt;
|
|
|
|
buf->vb.width = dev->width;
|
|
|
|
buf->vb.height = dev->height;
|
|
|
|
buf->vb.field = field;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
|
2008-04-13 17:38:47 +00:00
|
|
|
rc = videobuf_iolock(vq, &buf->vb, NULL);
|
|
|
|
if (rc < 0)
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!dev->isoc_ctl.num_bufs)
|
2008-04-13 17:41:23 +00:00
|
|
|
urb_init = 1;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
|
|
|
if (urb_init) {
|
2008-04-13 17:41:23 +00:00
|
|
|
rc = em28xx_prepare_isoc(dev, EM28XX_NUM_PACKETS,
|
|
|
|
EM28XX_NUM_BUFS);
|
|
|
|
if (rc < 0)
|
2008-04-13 17:38:47 +00:00
|
|
|
goto fail;
|
|
|
|
|
|
|
|
rc = em28xx_start_thread(vidq);
|
2008-04-13 17:41:23 +00:00
|
|
|
if (rc < 0)
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
buf->vb.state = VIDEOBUF_PREPARED;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail:
|
2008-04-13 17:41:23 +00:00
|
|
|
free_buffer(vq, buf);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
|
|
|
|
{
|
|
|
|
struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
|
|
|
|
struct em28xx_fh *fh = vq->priv_data;
|
2008-04-13 17:41:23 +00:00
|
|
|
struct em28xx *dev = fh->dev;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
struct em28xx_dmaqueue *vidq = &dev->vidq;
|
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
buf->vb.state = VIDEOBUF_QUEUED;
|
|
|
|
list_add_tail(&buf->vb.queue, &vidq->active);
|
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
|
|
|
|
{
|
2008-04-13 17:41:23 +00:00
|
|
|
struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
struct em28xx_fh *fh = vq->priv_data;
|
2008-04-13 17:41:23 +00:00
|
|
|
struct em28xx *dev = (struct em28xx *)fh->dev;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
em28xx_isocdbg("em28xx: called buffer_release\n");
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
free_buffer(vq, buf);
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct videobuf_queue_ops em28xx_video_qops = {
|
|
|
|
.buf_setup = buffer_setup,
|
|
|
|
.buf_prepare = buffer_prepare,
|
|
|
|
.buf_queue = buffer_queue,
|
|
|
|
.buf_release = buffer_release,
|
|
|
|
};
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
/********************* v4l2 interface ******************************************/
|
|
|
|
|
|
|
|
/*
|
2005-11-09 05:38:27 +00:00
|
|
|
* em28xx_config()
|
2005-11-09 05:37:07 +00:00
|
|
|
* inits registers with sane defaults
|
|
|
|
*/
|
2005-11-09 05:38:27 +00:00
|
|
|
static int em28xx_config(struct em28xx *dev)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
/* Sets I2C speed to 100 KHz */
|
2007-11-03 19:48:01 +00:00
|
|
|
if (!dev->is_em2800)
|
|
|
|
em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
/* enable vbi capturing */
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2006-02-27 03:07:34 +00:00
|
|
|
/* em28xx_write_regs_req(dev,0x00,0x0e,"\xC0",1); audio register */
|
|
|
|
/* em28xx_write_regs_req(dev,0x00,0x0f,"\x80",1); clk register */
|
2006-01-23 19:11:08 +00:00
|
|
|
em28xx_write_regs_req(dev,0x00,0x11,"\x51",1);
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
dev->mute = 1; /* maybe not the right place... */
|
|
|
|
dev->volume = 0x1f;
|
2008-01-05 12:53:54 +00:00
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_outfmt_set_yuv422(dev);
|
|
|
|
em28xx_colorlevels_set_default(dev);
|
|
|
|
em28xx_compression_disable(dev);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2005-11-09 05:38:27 +00:00
|
|
|
* em28xx_config_i2c()
|
2005-11-09 05:37:07 +00:00
|
|
|
* configure i2c attached devices
|
|
|
|
*/
|
2005-12-01 08:51:35 +00:00
|
|
|
static void em28xx_config_i2c(struct em28xx *dev)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2006-04-02 16:35:00 +00:00
|
|
|
struct v4l2_routing route;
|
|
|
|
|
|
|
|
route.input = INPUT(dev->ctl_input)->vmux;
|
|
|
|
route.output = 0;
|
2006-10-10 21:48:37 +00:00
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL);
|
2006-04-02 16:35:00 +00:00
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
|
2006-03-13 16:31:31 +00:00
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2005-11-09 05:38:43 +00:00
|
|
|
static void video_mux(struct em28xx *dev, int index)
|
|
|
|
{
|
2006-04-02 16:35:00 +00:00
|
|
|
struct v4l2_routing route;
|
2005-11-09 05:38:43 +00:00
|
|
|
|
2006-04-02 16:35:00 +00:00
|
|
|
route.input = INPUT(index)->vmux;
|
|
|
|
route.output = 0;
|
2005-11-09 05:38:43 +00:00
|
|
|
dev->ctl_input = index;
|
|
|
|
dev->ctl_ainput = INPUT(index)->amux;
|
|
|
|
|
2006-04-02 16:35:00 +00:00
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
|
2005-11-09 05:38:43 +00:00
|
|
|
|
|
|
|
if (dev->has_msp34xx) {
|
2006-01-09 17:25:37 +00:00
|
|
|
if (dev->i2s_speed)
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, &dev->i2s_speed);
|
2006-03-19 15:35:57 +00:00
|
|
|
route.input = dev->ctl_ainput;
|
2006-04-01 21:03:23 +00:00
|
|
|
route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1);
|
2006-03-19 15:35:57 +00:00
|
|
|
/* Note: this is msp3400 specific */
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route);
|
2005-11-09 05:38:43 +00:00
|
|
|
}
|
2008-01-05 12:53:54 +00:00
|
|
|
|
2008-02-06 21:34:13 +00:00
|
|
|
em28xx_audio_analog_set(dev);
|
2005-11-09 05:38:43 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 04:08:26 +00:00
|
|
|
/* Usage lock check functions */
|
|
|
|
static int res_get(struct em28xx_fh *fh)
|
|
|
|
{
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
/* This instance already has stream_on */
|
|
|
|
if (fh->stream_on)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
if (dev->stream_on)
|
2008-04-13 17:55:38 +00:00
|
|
|
return -EINVAL;
|
2007-11-11 04:08:26 +00:00
|
|
|
|
2008-04-13 17:55:38 +00:00
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
dev->stream_on = 1;
|
|
|
|
fh->stream_on = 1;
|
2007-11-11 04:08:26 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int res_check(struct em28xx_fh *fh)
|
|
|
|
{
|
|
|
|
return (fh->stream_on);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void res_free(struct em28xx_fh *fh)
|
|
|
|
{
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
fh->stream_on = 0;
|
|
|
|
dev->stream_on = 0;
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/*
|
|
|
|
* em28xx_get_ctrl()
|
|
|
|
* return the current saturation, brightness or contrast, mute state
|
|
|
|
*/
|
|
|
|
static int em28xx_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl)
|
|
|
|
{
|
|
|
|
switch (ctrl->id) {
|
|
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
|
|
ctrl->value = dev->mute;
|
|
|
|
return 0;
|
|
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
|
|
ctrl->value = dev->volume;
|
|
|
|
return 0;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/*
|
|
|
|
* em28xx_set_ctrl()
|
|
|
|
* mute or set new saturation, brightness or contrast
|
|
|
|
*/
|
|
|
|
static int em28xx_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl)
|
|
|
|
{
|
|
|
|
switch (ctrl->id) {
|
|
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
|
|
if (ctrl->value != dev->mute) {
|
|
|
|
dev->mute = ctrl->value;
|
|
|
|
return em28xx_audio_analog_set(dev);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
|
|
dev->volume = ctrl->value;
|
|
|
|
return em28xx_audio_analog_set(dev);
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int check_dev(struct em28xx *dev)
|
|
|
|
{
|
|
|
|
if (dev->state & DEV_DISCONNECTED) {
|
|
|
|
em28xx_errdev("v4l2 ioctl: device not present\n");
|
|
|
|
return -ENODEV;
|
2006-01-23 19:11:08 +00:00
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (dev->state & DEV_MISCONFIGURED) {
|
|
|
|
em28xx_errdev("v4l2 ioctl: device is misconfigured; "
|
|
|
|
"close and open it again\n");
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static void get_scale(struct em28xx *dev,
|
|
|
|
unsigned int width, unsigned int height,
|
|
|
|
unsigned int *hscale, unsigned int *vscale)
|
|
|
|
{
|
|
|
|
unsigned int maxw = norm_maxw(dev);
|
|
|
|
unsigned int maxh = norm_maxh(dev);
|
|
|
|
|
|
|
|
*hscale = (((unsigned long)maxw) << 12) / width - 4096L;
|
|
|
|
if (*hscale >= 0x4000)
|
|
|
|
*hscale = 0x3fff;
|
|
|
|
|
|
|
|
*vscale = (((unsigned long)maxh) << 12) / height - 4096L;
|
|
|
|
if (*vscale >= 0x4000)
|
|
|
|
*vscale = 0x3fff;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* ------------------------------------------------------------------
|
|
|
|
IOCTL vidioc handling
|
|
|
|
------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
static int vidioc_g_fmt_cap(struct file *file, void *priv,
|
|
|
|
struct v4l2_format *f)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_lock(&dev->lock);
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
f->fmt.pix.width = dev->width;
|
|
|
|
f->fmt.pix.height = dev->height;
|
|
|
|
f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
|
|
|
|
f->fmt.pix.bytesperline = dev->bytesperline;
|
|
|
|
f->fmt.pix.sizeimage = dev->frame_size;
|
|
|
|
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* FIXME: TOP? NONE? BOTTOM? ALTENATE? */
|
|
|
|
f->fmt.pix.field = dev->interlaced ?
|
|
|
|
V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_try_fmt_cap(struct file *file, void *priv,
|
|
|
|
struct v4l2_format *f)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int width = f->fmt.pix.width;
|
|
|
|
int height = f->fmt.pix.height;
|
|
|
|
unsigned int maxw = norm_maxw(dev);
|
|
|
|
unsigned int maxh = norm_maxh(dev);
|
|
|
|
unsigned int hscale, vscale;
|
|
|
|
|
|
|
|
/* width must even because of the YUYV format
|
|
|
|
height must be even because of interlacing */
|
|
|
|
height &= 0xfffe;
|
|
|
|
width &= 0xfffe;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (height < 32)
|
|
|
|
height = 32;
|
|
|
|
if (height > maxh)
|
|
|
|
height = maxh;
|
|
|
|
if (width < 48)
|
|
|
|
width = 48;
|
|
|
|
if (width > maxw)
|
|
|
|
width = maxw;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_lock(&dev->lock);
|
2007-11-11 04:08:26 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (dev->is_em2800) {
|
|
|
|
/* the em2800 can only scale down to 50% */
|
|
|
|
if (height % (maxh / 2))
|
|
|
|
height = maxh;
|
|
|
|
if (width % (maxw / 2))
|
|
|
|
width = maxw;
|
|
|
|
/* according to empiatech support */
|
|
|
|
/* the MaxPacketSize is to small to support */
|
|
|
|
/* framesizes larger than 640x480 @ 30 fps */
|
|
|
|
/* or 640x576 @ 25 fps. As this would cut */
|
|
|
|
/* of a part of the image we prefer */
|
|
|
|
/* 360x576 or 360x480 for now */
|
|
|
|
if (width == maxw && height == maxh)
|
|
|
|
width /= 2;
|
|
|
|
}
|
2007-11-11 04:08:26 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
get_scale(dev, width, height, &hscale, &vscale);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
width = (((unsigned long)maxw) << 12) / (hscale + 4096L);
|
|
|
|
height = (((unsigned long)maxh) << 12) / (vscale + 4096L);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
f->fmt.pix.width = width;
|
|
|
|
f->fmt.pix.height = height;
|
|
|
|
f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
|
|
|
|
f->fmt.pix.bytesperline = width * 2;
|
|
|
|
f->fmt.pix.sizeimage = width * 2 * height;
|
|
|
|
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
|
|
|
|
f->fmt.pix.field = V4L2_FIELD_INTERLACED;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2006-02-07 08:49:14 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
2005-11-09 05:37:07 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_s_fmt_cap(struct file *file, void *priv,
|
|
|
|
struct v4l2_format *f)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
int rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
2007-11-11 04:08:26 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
vidioc_try_fmt_cap(file, priv, f);
|
2007-11-11 04:08:26 +00:00
|
|
|
|
2007-11-04 00:22:38 +00:00
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
|
2008-04-13 17:57:01 +00:00
|
|
|
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
|
|
|
|
em28xx_errdev("%s queue busy\n", __func__);
|
|
|
|
rc = -EBUSY;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2008-04-13 18:02:24 +00:00
|
|
|
if (dev->stream_on && !fh->stream_on) {
|
|
|
|
em28xx_errdev("%s device in use by another fh\n", __func__);
|
|
|
|
rc = -EBUSY;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* set new image size */
|
|
|
|
dev->width = f->fmt.pix.width;
|
|
|
|
dev->height = f->fmt.pix.height;
|
|
|
|
dev->frame_size = dev->width * dev->height * 2;
|
|
|
|
dev->field_size = dev->frame_size >> 1;
|
|
|
|
dev->bytesperline = dev->width * 2;
|
|
|
|
get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
em28xx_set_alternate(dev);
|
|
|
|
em28xx_resolution_set(dev);
|
|
|
|
|
2008-04-13 17:57:01 +00:00
|
|
|
rc = 0;
|
|
|
|
|
|
|
|
out:
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
2008-04-13 17:57:01 +00:00
|
|
|
return rc;
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
struct v4l2_format f;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
2007-11-11 17:15:34 +00:00
|
|
|
dev->norm = *norm;
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* Adjusts width/height, if needed */
|
|
|
|
f.fmt.pix.width = dev->width;
|
|
|
|
f.fmt.pix.height = dev->height;
|
|
|
|
vidioc_try_fmt_cap(file, priv, &f);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_lock(&dev->lock);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* set new image size */
|
|
|
|
dev->width = f.fmt.pix.width;
|
|
|
|
dev->height = f.fmt.pix.height;
|
|
|
|
dev->frame_size = dev->width * dev->height * 2;
|
|
|
|
dev->field_size = dev->frame_size >> 1;
|
|
|
|
dev->bytesperline = dev->width * 2;
|
|
|
|
get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
em28xx_resolution_set(dev);
|
2007-11-11 17:15:34 +00:00
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_S_STD, &dev->norm);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
2007-11-11 04:13:49 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static const char *iname[] = {
|
|
|
|
[EM28XX_VMUX_COMPOSITE1] = "Composite1",
|
|
|
|
[EM28XX_VMUX_COMPOSITE2] = "Composite2",
|
|
|
|
[EM28XX_VMUX_COMPOSITE3] = "Composite3",
|
|
|
|
[EM28XX_VMUX_COMPOSITE4] = "Composite4",
|
|
|
|
[EM28XX_VMUX_SVIDEO] = "S-Video",
|
|
|
|
[EM28XX_VMUX_TELEVISION] = "Television",
|
|
|
|
[EM28XX_VMUX_CABLE] = "Cable TV",
|
|
|
|
[EM28XX_VMUX_DVB] = "DVB",
|
|
|
|
[EM28XX_VMUX_DEBUG] = "for debug only",
|
|
|
|
};
|
2007-11-11 04:13:49 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_enum_input(struct file *file, void *priv,
|
|
|
|
struct v4l2_input *i)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
unsigned int n;
|
2007-11-11 04:13:49 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
n = i->index;
|
|
|
|
if (n >= MAX_EM28XX_INPUT)
|
|
|
|
return -EINVAL;
|
|
|
|
if (0 == INPUT(n)->type)
|
|
|
|
return -EINVAL;
|
2007-11-11 04:13:49 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
i->index = n;
|
|
|
|
i->type = V4L2_INPUT_TYPE_CAMERA;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
strcpy(i->name, iname[INPUT(n)->type]);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if ((EM28XX_VMUX_TELEVISION == INPUT(n)->type) ||
|
|
|
|
(EM28XX_VMUX_CABLE == INPUT(n)->type))
|
|
|
|
i->type = V4L2_INPUT_TYPE_TUNER;
|
|
|
|
|
2007-11-11 17:15:34 +00:00
|
|
|
i->std = dev->vdev->tvnorms;
|
2007-11-11 16:17:17 +00:00
|
|
|
|
|
|
|
return 0;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
*i = dev->ctl_input;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
if (i >= MAX_EM28XX_INPUT)
|
|
|
|
return -EINVAL;
|
|
|
|
if (0 == INPUT(i)->type)
|
|
|
|
return -EINVAL;
|
2007-11-11 04:08:26 +00:00
|
|
|
|
2007-11-04 00:22:38 +00:00
|
|
|
mutex_lock(&dev->lock);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
video_mux(dev, i);
|
|
|
|
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
unsigned int index = a->index;
|
|
|
|
|
|
|
|
if (a->index > 1)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
index = dev->ctl_ainput;
|
|
|
|
|
|
|
|
if (index == 0) {
|
|
|
|
strcpy(a->name, "Television");
|
2005-11-09 05:37:07 +00:00
|
|
|
} else {
|
2007-11-11 16:17:17 +00:00
|
|
|
strcpy(a->name, "Line In");
|
|
|
|
}
|
|
|
|
a->capability = V4L2_AUDCAP_STEREO;
|
|
|
|
a->index = index;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
|
|
|
|
if (a->index != dev->ctl_ainput)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_queryctrl(struct file *file, void *priv,
|
|
|
|
struct v4l2_queryctrl *qc)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int id = qc->id;
|
|
|
|
int i;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
memset(qc, 0, sizeof(*qc));
|
|
|
|
|
|
|
|
qc->id = id;
|
|
|
|
|
|
|
|
if (!dev->has_msp34xx) {
|
|
|
|
for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) {
|
|
|
|
if (qc->id && qc->id == em28xx_qctrl[i].id) {
|
|
|
|
memcpy(qc, &(em28xx_qctrl[i]), sizeof(*qc));
|
|
|
|
return 0;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
}
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_QUERYCTRL, qc);
|
|
|
|
mutex_unlock(&dev->lock);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (qc->type)
|
|
|
|
return 0;
|
|
|
|
else
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_g_ctrl(struct file *file, void *priv,
|
|
|
|
struct v4l2_control *ctrl)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
mutex_lock(&dev->lock);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (!dev->has_msp34xx)
|
|
|
|
rc = em28xx_get_ctrl(dev, ctrl);
|
|
|
|
else
|
|
|
|
rc = -EINVAL;
|
|
|
|
|
|
|
|
if (rc == -EINVAL) {
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_G_CTRL, ctrl);
|
|
|
|
rc = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_s_ctrl(struct file *file, void *priv,
|
|
|
|
struct v4l2_control *ctrl)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
u8 i;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
|
|
|
|
if (dev->has_msp34xx)
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_S_CTRL, ctrl);
|
|
|
|
else {
|
|
|
|
rc = 1;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) {
|
|
|
|
if (ctrl->id == em28xx_qctrl[i].id) {
|
|
|
|
if (ctrl->value < em28xx_qctrl[i].minimum ||
|
|
|
|
ctrl->value > em28xx_qctrl[i].maximum) {
|
|
|
|
rc = -ERANGE;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = em28xx_set_ctrl(dev, ctrl);
|
|
|
|
break;
|
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* Control not found - try to send it to the attached devices */
|
|
|
|
if (rc == 1) {
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_S_CTRL, ctrl);
|
|
|
|
rc = 0;
|
|
|
|
}
|
|
|
|
|
2007-11-04 00:22:38 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
2007-11-11 16:17:17 +00:00
|
|
|
return rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_g_tuner(struct file *file, void *priv,
|
|
|
|
struct v4l2_tuner *t)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
if (0 != t->index)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
strcpy(t->name, "Tuner");
|
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_G_TUNER, t);
|
|
|
|
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_s_tuner(struct file *file, void *priv,
|
|
|
|
struct v4l2_tuner *t)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
2007-11-10 13:26:20 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
if (0 != t->index)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_S_TUNER, t);
|
|
|
|
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_g_frequency(struct file *file, void *priv,
|
|
|
|
struct v4l2_frequency *f)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2008-01-05 20:22:01 +00:00
|
|
|
f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
|
2007-11-11 16:17:17 +00:00
|
|
|
f->frequency = dev->ctl_freq;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_s_frequency(struct file *file, void *priv,
|
|
|
|
struct v4l2_frequency *f)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
2005-11-09 05:37:52 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
if (0 != f->tuner)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2008-01-05 20:22:01 +00:00
|
|
|
if (unlikely(0 == fh->radio && f->type != V4L2_TUNER_ANALOG_TV))
|
|
|
|
return -EINVAL;
|
|
|
|
if (unlikely(1 == fh->radio && f->type != V4L2_TUNER_RADIO))
|
2007-11-11 16:17:17 +00:00
|
|
|
return -EINVAL;
|
2007-11-11 04:08:26 +00:00
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
2007-11-11 01:21:01 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
dev->ctl_freq = f->frequency;
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, f);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2008-02-06 12:00:41 +00:00
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
|
|
static int em28xx_reg_len(int reg)
|
|
|
|
{
|
|
|
|
switch (reg) {
|
|
|
|
case AC97LSB_REG:
|
|
|
|
case HSCALELOW_REG:
|
|
|
|
case VSCALELOW_REG:
|
|
|
|
return 2;
|
|
|
|
default:
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_g_register(struct file *file, void *priv,
|
|
|
|
struct v4l2_register *reg)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!v4l2_chip_match_host(reg->match_type, reg->match_chip))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (em28xx_reg_len(reg->reg) == 1) {
|
|
|
|
ret = em28xx_read_reg(dev, reg->reg);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
reg->val = ret;
|
|
|
|
} else {
|
2008-02-06 18:56:16 +00:00
|
|
|
u64 val = 0;
|
2008-02-06 12:00:41 +00:00
|
|
|
ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS,
|
|
|
|
reg->reg, (char *)&val, 2);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2008-02-06 18:56:16 +00:00
|
|
|
reg->val = cpu_to_le64((__u64)val);
|
2008-02-06 12:00:41 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_s_register(struct file *file, void *priv,
|
|
|
|
struct v4l2_register *reg)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
2008-02-06 18:56:16 +00:00
|
|
|
u64 buf;
|
2008-02-06 12:00:41 +00:00
|
|
|
|
2008-02-06 18:56:16 +00:00
|
|
|
buf = le64_to_cpu((__u64)reg->val);
|
2008-02-06 12:00:41 +00:00
|
|
|
|
|
|
|
return em28xx_write_regs(dev, reg->reg, (char *)&buf,
|
|
|
|
em28xx_reg_len(reg->reg));
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_cropcap(struct file *file, void *priv,
|
|
|
|
struct v4l2_cropcap *cc)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
|
|
|
|
if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
2005-11-09 05:37:07 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
cc->bounds.left = 0;
|
|
|
|
cc->bounds.top = 0;
|
|
|
|
cc->bounds.width = dev->width;
|
|
|
|
cc->bounds.height = dev->height;
|
|
|
|
cc->defrect = cc->bounds;
|
|
|
|
cc->pixelaspect.numerator = 54; /* 4:3 FIXME: remove magic numbers */
|
|
|
|
cc->pixelaspect.denominator = 59;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_streamon(struct file *file, void *priv,
|
|
|
|
enum v4l2_buf_type type)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
if (unlikely(res_get(fh) < 0))
|
2007-11-11 16:17:17 +00:00
|
|
|
return -EBUSY;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return (videobuf_streamon(&fh->vb_vidq));
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_streamoff(struct file *file, void *priv,
|
|
|
|
enum v4l2_buf_type type)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
|
|
return -EINVAL;
|
|
|
|
if (type != fh->type)
|
2007-11-11 16:17:17 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
videobuf_streamoff(&fh->vb_vidq);
|
|
|
|
res_free(fh);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_querycap(struct file *file, void *priv,
|
|
|
|
struct v4l2_capability *cap)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
|
|
|
|
strlcpy(cap->driver, "em28xx", sizeof(cap->driver));
|
|
|
|
strlcpy(cap->card, em28xx_boards[dev->model].name, sizeof(cap->card));
|
|
|
|
strlcpy(cap->bus_info, dev->udev->dev.bus_id, sizeof(cap->bus_info));
|
|
|
|
|
|
|
|
cap->version = EM28XX_VERSION_CODE;
|
|
|
|
|
|
|
|
cap->capabilities =
|
|
|
|
V4L2_CAP_SLICED_VBI_CAPTURE |
|
|
|
|
V4L2_CAP_VIDEO_CAPTURE |
|
|
|
|
V4L2_CAP_AUDIO |
|
|
|
|
V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
|
|
|
|
|
V4L/DVB (7060): em28xx: remove has_tuner
has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT
means the same thing.
Having two ways to say that a tuner is not present is
not nice, since it may lead to bad setups. In fact, with the previous
code, if a device were using has_tuner=0, but the user forces a tuner,
with modprobe option tuner=type, the modprobe option won't work.
Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent.
So, with the previous logic, in this case, the driver should set
has_tuner=0, or has_tuner=1 otherwise.
Instead of adding several additional tests and setups, better just to
remove .has_tuner.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-24 09:59:20 +00:00
|
|
|
if (dev->tuner_type != TUNER_ABSENT)
|
2007-11-11 16:17:17 +00:00
|
|
|
cap->capabilities |= V4L2_CAP_TUNER;
|
|
|
|
|
|
|
|
return 0;
|
2006-01-09 17:25:14 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_enum_fmt_cap(struct file *file, void *priv,
|
|
|
|
struct v4l2_fmtdesc *fmtd)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
if (fmtd->index != 0)
|
2006-01-09 17:25:14 +00:00
|
|
|
return -EINVAL;
|
2007-11-11 16:17:17 +00:00
|
|
|
|
|
|
|
fmtd->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
|
|
strcpy(fmtd->description, "Packed YUY2");
|
|
|
|
fmtd->pixelformat = V4L2_PIX_FMT_YUYV;
|
|
|
|
memset(fmtd->reserved, 0, sizeof(fmtd->reserved));
|
|
|
|
|
|
|
|
return 0;
|
2006-01-09 17:25:14 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* Sliced VBI ioctls */
|
|
|
|
static int vidioc_g_fmt_vbi_capture(struct file *file, void *priv,
|
|
|
|
struct v4l2_format *f)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
|
|
|
|
f->fmt.sliced.service_set = 0;
|
|
|
|
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_G_FMT, f);
|
|
|
|
|
|
|
|
if (f->fmt.sliced.service_set == 0)
|
|
|
|
rc = -EINVAL;
|
|
|
|
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_try_set_vbi_capture(struct file *file, void *priv,
|
|
|
|
struct v4l2_format *f)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_G_FMT, f);
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
|
|
|
|
if (f->fmt.sliced.service_set == 0)
|
|
|
|
return -EINVAL;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
|
|
|
|
static int vidioc_reqbufs(struct file *file, void *priv,
|
|
|
|
struct v4l2_requestbuffers *rb)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return (videobuf_reqbufs(&fh->vb_vidq, rb));
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_querybuf(struct file *file, void *priv,
|
|
|
|
struct v4l2_buffer *b)
|
2006-01-23 19:11:08 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return (videobuf_querybuf(&fh->vb_vidq, b));
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return (videobuf_qbuf(&fh->vb_vidq, b));
|
2006-01-23 19:11:08 +00:00
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
|
2006-01-23 19:11:08 +00:00
|
|
|
{
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return (videobuf_dqbuf(&fh->vb_vidq, b,
|
|
|
|
file->f_flags & O_NONBLOCK));
|
|
|
|
}
|
2006-01-23 19:11:08 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
#ifdef CONFIG_VIDEO_V4L1_COMPAT
|
2008-04-13 17:41:23 +00:00
|
|
|
static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
{
|
2008-04-13 17:41:23 +00:00
|
|
|
struct em28xx_fh *fh = priv;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2008-04-13 17:41:23 +00:00
|
|
|
return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
#endif
|
|
|
|
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2008-01-05 20:22:01 +00:00
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
/* RADIO ESPECIFIC IOCTLS */
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
|
|
|
|
static int radio_querycap(struct file *file, void *priv,
|
|
|
|
struct v4l2_capability *cap)
|
|
|
|
{
|
|
|
|
struct em28xx *dev = ((struct em28xx_fh *)priv)->dev;
|
|
|
|
|
|
|
|
strlcpy(cap->driver, "em28xx", sizeof(cap->driver));
|
|
|
|
strlcpy(cap->card, em28xx_boards[dev->model].name, sizeof(cap->card));
|
|
|
|
strlcpy(cap->bus_info, dev->udev->dev.bus_id, sizeof(cap->bus_info));
|
|
|
|
|
|
|
|
cap->version = EM28XX_VERSION_CODE;
|
|
|
|
cap->capabilities = V4L2_CAP_TUNER;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_g_tuner(struct file *file, void *priv,
|
|
|
|
struct v4l2_tuner *t)
|
|
|
|
{
|
|
|
|
struct em28xx *dev = ((struct em28xx_fh *)priv)->dev;
|
|
|
|
|
|
|
|
if (unlikely(t->index > 0))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
strcpy(t->name, "Radio");
|
|
|
|
t->type = V4L2_TUNER_RADIO;
|
|
|
|
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_G_TUNER, t);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_enum_input(struct file *file, void *priv,
|
|
|
|
struct v4l2_input *i)
|
|
|
|
{
|
|
|
|
if (i->index != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
strcpy(i->name, "Radio");
|
|
|
|
i->type = V4L2_INPUT_TYPE_TUNER;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
|
|
|
|
{
|
|
|
|
if (unlikely(a->index))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
strcpy(a->name, "Radio");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_s_tuner(struct file *file, void *priv,
|
|
|
|
struct v4l2_tuner *t)
|
|
|
|
{
|
|
|
|
struct em28xx *dev = ((struct em28xx_fh *)priv)->dev;
|
|
|
|
|
|
|
|
if (0 != t->index)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
em28xx_i2c_call_clients(dev, VIDIOC_S_TUNER, t);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_s_audio(struct file *file, void *fh,
|
|
|
|
struct v4l2_audio *a)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_s_input(struct file *file, void *fh, unsigned int i)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int radio_queryctrl(struct file *file, void *priv,
|
|
|
|
struct v4l2_queryctrl *qc)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (qc->id < V4L2_CID_BASE ||
|
|
|
|
qc->id >= V4L2_CID_LASTP1)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) {
|
|
|
|
if (qc->id && qc->id == em28xx_qctrl[i].id) {
|
|
|
|
memcpy(qc, &(em28xx_qctrl[i]), sizeof(*qc));
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/*
|
|
|
|
* em28xx_v4l2_open()
|
|
|
|
* inits the device and starts isoc transfer
|
|
|
|
*/
|
|
|
|
static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
|
|
|
|
{
|
|
|
|
int minor = iminor(inode);
|
2008-01-05 20:22:01 +00:00
|
|
|
int errCode = 0, radio = 0;
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx *h,*dev = NULL;
|
|
|
|
struct em28xx_fh *fh;
|
2008-04-13 17:38:47 +00:00
|
|
|
enum v4l2_buf_type fh_type = 0;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
list_for_each_entry(h, &em28xx_devlist, devlist) {
|
|
|
|
if (h->vdev->minor == minor) {
|
|
|
|
dev = h;
|
2008-04-13 17:38:47 +00:00
|
|
|
fh_type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
|
|
|
if (h->vbi_dev->minor == minor) {
|
|
|
|
dev = h;
|
2008-04-13 17:38:47 +00:00
|
|
|
fh_type = V4L2_BUF_TYPE_VBI_CAPTURE;
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
2008-01-05 20:22:01 +00:00
|
|
|
if (h->radio_dev &&
|
|
|
|
h->radio_dev->minor == minor) {
|
|
|
|
radio = 1;
|
|
|
|
dev = h;
|
|
|
|
}
|
2006-01-23 19:11:08 +00:00
|
|
|
}
|
2007-11-11 16:17:17 +00:00
|
|
|
if (NULL == dev)
|
|
|
|
return -ENODEV;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
em28xx_videodbg("open minor=%d type=%s users=%d\n",
|
2008-04-13 17:38:47 +00:00
|
|
|
minor, v4l2_type_names[fh_type], dev->users);
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL);
|
2006-01-23 19:11:09 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (!fh) {
|
|
|
|
em28xx_errdev("em28xx-video.c: Out of memory?!\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
fh->dev = dev;
|
2008-01-05 20:22:01 +00:00
|
|
|
fh->radio = radio;
|
2008-04-13 17:38:47 +00:00
|
|
|
fh->type = fh_type;
|
2007-11-11 16:17:17 +00:00
|
|
|
filp->private_data = fh;
|
2006-01-23 19:11:09 +00:00
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
|
2007-11-11 16:17:17 +00:00
|
|
|
dev->width = norm_maxw(dev);
|
|
|
|
dev->height = norm_maxh(dev);
|
|
|
|
dev->frame_size = dev->width * dev->height * 2;
|
|
|
|
dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */
|
|
|
|
dev->bytesperline = dev->width * 2;
|
|
|
|
dev->hscale = 0;
|
|
|
|
dev->vscale = 0;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
V4L/DVB (7179): Allow more than one em28xx board
em28xx driver is capable of handling more than one usb device. However, isoc
transfers require a large amount of data to be transfered.
Before this patch, just one em28xx board were enough to allocate more than 50%
URBs:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc=480/800 us (60%), #Int= 0, #Iso= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
So, only one board could use an USB host at the same time. After the patch, it
is possible to use more than one em28xx at the same time, on the same usb host,
if the image size is slower or equal to 345600, since those images will
require about 30% of the URBs:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc=232/800 us (29%), #Int= 0, #Iso= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
So, in thesis, after the patch, it would be possible to use up to 3 boards by
each usb host, if the devices are generating small images.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-08 18:44:25 +00:00
|
|
|
em28xx_set_alternate(dev);
|
2007-11-11 16:17:17 +00:00
|
|
|
em28xx_resolution_set(dev);
|
2006-01-23 19:11:08 +00:00
|
|
|
|
|
|
|
}
|
2008-01-05 20:22:01 +00:00
|
|
|
if (fh->radio) {
|
|
|
|
em28xx_videodbg("video_open: setting radio device\n");
|
|
|
|
em28xx_i2c_call_clients(dev, AUDC_SET_RADIO, NULL);
|
|
|
|
}
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
dev->users++;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
|
|
|
|
NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED,
|
|
|
|
sizeof(struct em28xx_buffer), fh);
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return errCode;
|
2006-01-23 19:11:08 +00:00
|
|
|
}
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
/*
|
2007-11-11 16:17:17 +00:00
|
|
|
* em28xx_realease_resources()
|
|
|
|
* unregisters the v4l2,i2c and usb devices
|
|
|
|
* called when the device gets disconected or at module unload
|
|
|
|
*/
|
|
|
|
static void em28xx_release_resources(struct em28xx *dev)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/*FIXME: I2C IR should be disconnected */
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
em28xx_info("V4L2 devices /dev/video%d and /dev/vbi%d deregistered\n",
|
|
|
|
dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN,
|
|
|
|
dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN);
|
|
|
|
list_del(&dev->devlist);
|
2008-01-05 20:22:01 +00:00
|
|
|
if (dev->radio_dev) {
|
|
|
|
if (-1 != dev->radio_dev->minor)
|
|
|
|
video_unregister_device(dev->radio_dev);
|
|
|
|
else
|
|
|
|
video_device_release(dev->radio_dev);
|
|
|
|
dev->radio_dev = NULL;
|
|
|
|
}
|
|
|
|
if (dev->vbi_dev) {
|
|
|
|
if (-1 != dev->vbi_dev->minor)
|
|
|
|
video_unregister_device(dev->vbi_dev);
|
|
|
|
else
|
|
|
|
video_device_release(dev->vbi_dev);
|
|
|
|
dev->vbi_dev = NULL;
|
|
|
|
}
|
|
|
|
if (dev->vdev) {
|
|
|
|
if (-1 != dev->vdev->minor)
|
|
|
|
video_unregister_device(dev->vdev);
|
|
|
|
else
|
|
|
|
video_device_release(dev->vdev);
|
|
|
|
dev->vdev = NULL;
|
|
|
|
}
|
2007-11-11 16:17:17 +00:00
|
|
|
em28xx_i2c_unregister(dev);
|
|
|
|
usb_put_dev(dev->udev);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* Mark device as unused */
|
|
|
|
em28xx_devused&=~(1<<dev->devno);
|
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/*
|
|
|
|
* em28xx_v4l2_close()
|
|
|
|
* stops streaming and deallocates all resources allocated by the v4l2 calls and ioctls
|
|
|
|
*/
|
|
|
|
static int em28xx_v4l2_close(struct inode *inode, struct file *filp)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = filp->private_data;
|
|
|
|
struct em28xx *dev = fh->dev;
|
|
|
|
int errCode;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
em28xx_videodbg("users=%d\n", dev->users);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (res_check(fh))
|
|
|
|
res_free(fh);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
mutex_lock(&dev->lock);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (dev->users == 1) {
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
videobuf_stop(&fh->vb_vidq);
|
|
|
|
videobuf_mmap_free(&fh->vb_vidq);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* the device is already disconnect,
|
|
|
|
free the remaining resources */
|
|
|
|
if (dev->state & DEV_DISCONNECTED) {
|
|
|
|
em28xx_release_resources(dev);
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
kfree(dev);
|
|
|
|
return 0;
|
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2008-04-13 17:38:47 +00:00
|
|
|
/* do this before setting alternate! */
|
|
|
|
em28xx_uninit_isoc(dev);
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* set alternate 0 */
|
|
|
|
dev->alt = 0;
|
|
|
|
em28xx_videodbg("setting alternate 0\n");
|
|
|
|
errCode = usb_set_interface(dev->udev, 0, 0);
|
|
|
|
if (errCode < 0) {
|
|
|
|
em28xx_errdev("cannot change alternate number to "
|
|
|
|
"0 (error=%i)\n", errCode);
|
|
|
|
}
|
2006-01-23 19:11:09 +00:00
|
|
|
}
|
2007-11-11 16:17:17 +00:00
|
|
|
kfree(fh);
|
|
|
|
dev->users--;
|
|
|
|
wake_up_interruptible_nr(&dev->open, 1);
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/*
|
|
|
|
* em28xx_v4l2_read()
|
|
|
|
* will allocate buffers when called for the first time
|
|
|
|
*/
|
|
|
|
static ssize_t
|
|
|
|
em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count,
|
2008-04-13 17:41:23 +00:00
|
|
|
loff_t *pos)
|
2007-11-11 16:17:17 +00:00
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = filp->private_data;
|
|
|
|
struct em28xx *dev = fh->dev;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* FIXME: read() is not prepared to allow changing the video
|
|
|
|
resolution while streaming. Seems a bug at em28xx_set_fmt
|
|
|
|
*/
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
|
|
|
|
if (unlikely(res_get(fh)))
|
|
|
|
return -EBUSY;
|
2007-11-11 16:17:17 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0,
|
|
|
|
filp->f_flags & O_NONBLOCK);
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return 0;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2007-11-11 16:17:17 +00:00
|
|
|
* em28xx_v4l2_poll()
|
|
|
|
* will allocate buffers when called for the first time
|
2005-11-09 05:37:07 +00:00
|
|
|
*/
|
2007-11-11 16:17:17 +00:00
|
|
|
static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table * wait)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-11 01:21:01 +00:00
|
|
|
struct em28xx_fh *fh = filp->private_data;
|
2007-11-11 16:17:17 +00:00
|
|
|
struct em28xx *dev = fh->dev;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (unlikely(res_get(fh) < 0))
|
|
|
|
return POLLERR;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
|
|
|
|
return POLLERR;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return videobuf_poll_stream(filp, &fh->vb_vidq, wait);
|
2007-11-11 16:17:17 +00:00
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/*
|
|
|
|
* em28xx_v4l2_mmap()
|
|
|
|
*/
|
|
|
|
static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
struct em28xx_fh *fh = filp->private_data;
|
|
|
|
struct em28xx *dev = fh->dev;
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
int rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
if (unlikely(res_get(fh) < 0))
|
|
|
|
return -EBUSY;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
rc = check_dev(dev);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
rc = videobuf_mmap_mapper(&fh->vb_vidq, vma);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
em28xx_videodbg("vma start=0x%08lx, size=%ld, ret=%d\n",
|
|
|
|
(unsigned long)vma->vm_start,
|
|
|
|
(unsigned long)vma->vm_end-(unsigned long)vma->vm_start,
|
|
|
|
rc);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
return rc;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2007-02-12 08:55:33 +00:00
|
|
|
static const struct file_operations em28xx_v4l_fops = {
|
2007-11-11 16:17:17 +00:00
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.open = em28xx_v4l2_open,
|
|
|
|
.release = em28xx_v4l2_close,
|
|
|
|
.read = em28xx_v4l2_read,
|
|
|
|
.poll = em28xx_v4l2_poll,
|
|
|
|
.mmap = em28xx_v4l2_mmap,
|
|
|
|
.ioctl = video_ioctl2,
|
|
|
|
.llseek = no_llseek,
|
|
|
|
.compat_ioctl = v4l_compat_ioctl32,
|
|
|
|
};
|
2006-01-09 17:24:58 +00:00
|
|
|
|
2008-01-05 20:22:01 +00:00
|
|
|
static const struct file_operations radio_fops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.open = em28xx_v4l2_open,
|
|
|
|
.release = em28xx_v4l2_close,
|
|
|
|
.ioctl = video_ioctl2,
|
|
|
|
.compat_ioctl = v4l_compat_ioctl32,
|
|
|
|
.llseek = no_llseek,
|
|
|
|
};
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
static const struct video_device em28xx_video_template = {
|
|
|
|
.fops = &em28xx_v4l_fops,
|
|
|
|
.release = video_device_release,
|
|
|
|
|
|
|
|
.minor = -1,
|
|
|
|
.vidioc_querycap = vidioc_querycap,
|
|
|
|
.vidioc_enum_fmt_cap = vidioc_enum_fmt_cap,
|
|
|
|
.vidioc_g_fmt_cap = vidioc_g_fmt_cap,
|
|
|
|
.vidioc_try_fmt_cap = vidioc_try_fmt_cap,
|
|
|
|
.vidioc_s_fmt_cap = vidioc_s_fmt_cap,
|
|
|
|
.vidioc_g_audio = vidioc_g_audio,
|
|
|
|
.vidioc_s_audio = vidioc_s_audio,
|
|
|
|
.vidioc_cropcap = vidioc_cropcap,
|
|
|
|
|
|
|
|
.vidioc_g_fmt_vbi_capture = vidioc_g_fmt_vbi_capture,
|
|
|
|
.vidioc_try_fmt_vbi_capture = vidioc_try_set_vbi_capture,
|
|
|
|
.vidioc_s_fmt_vbi_capture = vidioc_try_set_vbi_capture,
|
|
|
|
|
|
|
|
.vidioc_reqbufs = vidioc_reqbufs,
|
|
|
|
.vidioc_querybuf = vidioc_querybuf,
|
|
|
|
.vidioc_qbuf = vidioc_qbuf,
|
|
|
|
.vidioc_dqbuf = vidioc_dqbuf,
|
|
|
|
.vidioc_s_std = vidioc_s_std,
|
|
|
|
.vidioc_enum_input = vidioc_enum_input,
|
|
|
|
.vidioc_g_input = vidioc_g_input,
|
|
|
|
.vidioc_s_input = vidioc_s_input,
|
|
|
|
.vidioc_queryctrl = vidioc_queryctrl,
|
|
|
|
.vidioc_g_ctrl = vidioc_g_ctrl,
|
|
|
|
.vidioc_s_ctrl = vidioc_s_ctrl,
|
|
|
|
.vidioc_streamon = vidioc_streamon,
|
|
|
|
.vidioc_streamoff = vidioc_streamoff,
|
|
|
|
.vidioc_g_tuner = vidioc_g_tuner,
|
|
|
|
.vidioc_s_tuner = vidioc_s_tuner,
|
|
|
|
.vidioc_g_frequency = vidioc_g_frequency,
|
|
|
|
.vidioc_s_frequency = vidioc_s_frequency,
|
2008-02-06 12:00:41 +00:00
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
|
|
.vidioc_g_register = vidioc_g_register,
|
|
|
|
.vidioc_s_register = vidioc_s_register,
|
|
|
|
#endif
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
#ifdef CONFIG_VIDEO_V4L1_COMPAT
|
|
|
|
.vidiocgmbuf = vidiocgmbuf,
|
|
|
|
#endif
|
2007-11-11 16:17:17 +00:00
|
|
|
|
|
|
|
.tvnorms = V4L2_STD_ALL,
|
2007-11-11 17:15:34 +00:00
|
|
|
.current_norm = V4L2_STD_PAL,
|
2005-11-09 05:37:07 +00:00
|
|
|
};
|
|
|
|
|
2008-01-05 20:22:01 +00:00
|
|
|
static struct video_device em28xx_radio_template = {
|
|
|
|
.name = "em28xx-radio",
|
|
|
|
.type = VID_TYPE_TUNER,
|
|
|
|
.fops = &radio_fops,
|
|
|
|
.minor = -1,
|
|
|
|
.vidioc_querycap = radio_querycap,
|
|
|
|
.vidioc_g_tuner = radio_g_tuner,
|
|
|
|
.vidioc_enum_input = radio_enum_input,
|
|
|
|
.vidioc_g_audio = radio_g_audio,
|
|
|
|
.vidioc_s_tuner = radio_s_tuner,
|
|
|
|
.vidioc_s_audio = radio_s_audio,
|
|
|
|
.vidioc_s_input = radio_s_input,
|
|
|
|
.vidioc_queryctrl = radio_queryctrl,
|
|
|
|
.vidioc_g_ctrl = vidioc_g_ctrl,
|
|
|
|
.vidioc_s_ctrl = vidioc_s_ctrl,
|
|
|
|
.vidioc_g_frequency = vidioc_g_frequency,
|
|
|
|
.vidioc_s_frequency = vidioc_s_frequency,
|
2008-02-06 12:00:41 +00:00
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
|
|
.vidioc_g_register = vidioc_g_register,
|
|
|
|
.vidioc_s_register = vidioc_s_register,
|
|
|
|
#endif
|
2008-01-05 20:22:01 +00:00
|
|
|
};
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
/******************************** usb interface *****************************************/
|
|
|
|
|
2008-01-05 12:57:31 +00:00
|
|
|
|
|
|
|
static LIST_HEAD(em28xx_extension_devlist);
|
|
|
|
static DEFINE_MUTEX(em28xx_extension_devlist_lock);
|
|
|
|
|
|
|
|
int em28xx_register_extension(struct em28xx_ops *ops)
|
|
|
|
{
|
|
|
|
struct em28xx *h, *dev = NULL;
|
|
|
|
|
|
|
|
list_for_each_entry(h, &em28xx_devlist, devlist)
|
|
|
|
dev = h;
|
|
|
|
|
|
|
|
mutex_lock(&em28xx_extension_devlist_lock);
|
|
|
|
list_add_tail(&ops->next, &em28xx_extension_devlist);
|
|
|
|
if (dev)
|
|
|
|
ops->init(dev);
|
|
|
|
|
|
|
|
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
|
|
|
|
mutex_unlock(&em28xx_extension_devlist_lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(em28xx_register_extension);
|
|
|
|
|
|
|
|
void em28xx_unregister_extension(struct em28xx_ops *ops)
|
|
|
|
{
|
|
|
|
struct em28xx *h, *dev = NULL;
|
|
|
|
|
|
|
|
list_for_each_entry(h, &em28xx_devlist, devlist)
|
|
|
|
dev = h;
|
|
|
|
|
|
|
|
if (dev)
|
|
|
|
ops->fini(dev);
|
|
|
|
|
|
|
|
mutex_lock(&em28xx_extension_devlist_lock);
|
|
|
|
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
|
|
|
|
list_del(&ops->next);
|
|
|
|
mutex_unlock(&em28xx_extension_devlist_lock);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(em28xx_unregister_extension);
|
|
|
|
|
2008-01-29 01:10:48 +00:00
|
|
|
static struct video_device *em28xx_vdev_init(struct em28xx *dev,
|
|
|
|
const struct video_device *template,
|
|
|
|
const int type,
|
|
|
|
const char *type_name)
|
2008-01-05 20:22:01 +00:00
|
|
|
{
|
|
|
|
struct video_device *vfd;
|
|
|
|
|
|
|
|
vfd = video_device_alloc();
|
|
|
|
if (NULL == vfd)
|
|
|
|
return NULL;
|
|
|
|
*vfd = *template;
|
|
|
|
vfd->minor = -1;
|
|
|
|
vfd->dev = &dev->udev->dev;
|
|
|
|
vfd->release = video_device_release;
|
|
|
|
vfd->type = type;
|
2008-04-13 18:05:47 +00:00
|
|
|
vfd->debug = video_debug;
|
2008-01-05 20:22:01 +00:00
|
|
|
|
|
|
|
snprintf(vfd->name, sizeof(vfd->name), "%s %s",
|
|
|
|
dev->name, type_name);
|
|
|
|
|
|
|
|
return vfd;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
/*
|
2005-11-09 05:38:27 +00:00
|
|
|
* em28xx_init_dev()
|
2005-11-09 05:37:07 +00:00
|
|
|
* allocates and inits the device structs, registers i2c bus and v4l device
|
|
|
|
*/
|
2005-11-09 05:38:27 +00:00
|
|
|
static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
|
2007-11-04 00:20:59 +00:00
|
|
|
int minor)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2008-01-05 12:57:31 +00:00
|
|
|
struct em28xx_ops *ops = NULL;
|
2005-11-09 05:38:27 +00:00
|
|
|
struct em28xx *dev = *devhandle;
|
2005-11-09 05:37:07 +00:00
|
|
|
int retval = -ENOMEM;
|
2007-11-11 17:15:34 +00:00
|
|
|
int errCode;
|
2005-11-09 05:37:07 +00:00
|
|
|
unsigned int maxh, maxw;
|
|
|
|
|
|
|
|
dev->udev = udev;
|
2006-02-07 08:49:14 +00:00
|
|
|
mutex_init(&dev->lock);
|
2008-04-13 17:38:47 +00:00
|
|
|
spin_lock_init(&dev->slock);
|
2005-11-09 05:37:07 +00:00
|
|
|
init_waitqueue_head(&dev->open);
|
2007-11-11 01:21:01 +00:00
|
|
|
init_waitqueue_head(&dev->wait_frame);
|
|
|
|
init_waitqueue_head(&dev->wait_stream);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
dev->em28xx_write_regs = em28xx_write_regs;
|
|
|
|
dev->em28xx_read_reg = em28xx_read_reg;
|
|
|
|
dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
|
|
|
|
dev->em28xx_write_regs_req = em28xx_write_regs_req;
|
|
|
|
dev->em28xx_read_reg_req = em28xx_read_reg_req;
|
2007-11-04 11:06:48 +00:00
|
|
|
dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2008-01-05 12:59:03 +00:00
|
|
|
errCode = em28xx_read_reg(dev, CHIPID_REG);
|
|
|
|
if (errCode >= 0)
|
|
|
|
em28xx_info("em28xx chip ID = %d\n", errCode);
|
|
|
|
|
2006-01-23 19:11:10 +00:00
|
|
|
em28xx_pre_card_setup(dev);
|
2007-11-04 00:20:59 +00:00
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
errCode = em28xx_config(dev);
|
2005-11-09 05:37:07 +00:00
|
|
|
if (errCode) {
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_errdev("error configuring device\n");
|
2007-11-04 00:20:59 +00:00
|
|
|
em28xx_devused &= ~(1<<dev->devno);
|
2006-04-11 21:19:33 +00:00
|
|
|
kfree(dev);
|
2005-11-09 05:37:07 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* register i2c bus */
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_i2c_register(dev);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
/* Do board specific init and eeprom reading */
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_card_setup(dev);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2008-01-05 20:01:41 +00:00
|
|
|
/* Configure audio */
|
|
|
|
em28xx_audio_analog_set(dev);
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
/* configure the device */
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_config_i2c(dev);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-11 17:15:34 +00:00
|
|
|
/* set default norm */
|
|
|
|
dev->norm = em28xx_video_template.current_norm;
|
2007-11-04 00:20:59 +00:00
|
|
|
|
|
|
|
maxw = norm_maxw(dev);
|
|
|
|
maxh = norm_maxh(dev);
|
|
|
|
|
|
|
|
/* set default image size */
|
|
|
|
dev->width = maxw;
|
|
|
|
dev->height = maxh;
|
|
|
|
dev->interlaced = EM28XX_INTERLACED_DEFAULT;
|
|
|
|
dev->field_size = dev->width * dev->height;
|
|
|
|
dev->frame_size =
|
|
|
|
dev->interlaced ? dev->field_size << 1 : dev->field_size;
|
|
|
|
dev->bytesperline = dev->width * 2;
|
|
|
|
dev->hscale = 0;
|
|
|
|
dev->vscale = 0;
|
|
|
|
dev->ctl_input = 2;
|
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
errCode = em28xx_config(dev);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2008-01-05 20:22:01 +00:00
|
|
|
list_add_tail(&dev->devlist, &em28xx_devlist);
|
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* allocate and fill video video_device struct */
|
2008-01-05 20:22:01 +00:00
|
|
|
dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template,
|
|
|
|
VID_TYPE_CAPTURE, "video");
|
2005-11-09 05:37:07 +00:00
|
|
|
if (NULL == dev->vdev) {
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_errdev("cannot allocate video_device.\n");
|
2008-01-05 20:22:01 +00:00
|
|
|
goto fail_unreg;
|
2006-01-23 19:11:08 +00:00
|
|
|
}
|
V4L/DVB (7060): em28xx: remove has_tuner
has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT
means the same thing.
Having two ways to say that a tuner is not present is
not nice, since it may lead to bad setups. In fact, with the previous
code, if a device were using has_tuner=0, but the user forces a tuner,
with modprobe option tuner=type, the modprobe option won't work.
Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent.
So, with the previous logic, in this case, the driver should set
has_tuner=0, or has_tuner=1 otherwise.
Instead of adding several additional tests and setups, better just to
remove .has_tuner.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-24 09:59:20 +00:00
|
|
|
if (dev->tuner_type != TUNER_ABSENT)
|
2007-11-11 16:17:17 +00:00
|
|
|
dev->vdev->type |= VID_TYPE_TUNER;
|
2008-01-05 20:22:01 +00:00
|
|
|
|
|
|
|
/* register v4l2 video video_device */
|
|
|
|
retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
|
|
|
|
video_nr[dev->devno]);
|
|
|
|
if (retval) {
|
|
|
|
em28xx_errdev("unable to register video device (error=%i).\n",
|
|
|
|
retval);
|
|
|
|
goto fail_unreg;
|
|
|
|
}
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2007-11-11 16:17:17 +00:00
|
|
|
/* Allocate and fill vbi video_device struct */
|
2008-01-05 20:22:01 +00:00
|
|
|
dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template,
|
|
|
|
VFL_TYPE_VBI, "vbi");
|
|
|
|
/* register v4l2 vbi video_device */
|
|
|
|
if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
|
|
|
|
vbi_nr[dev->devno]) < 0) {
|
|
|
|
em28xx_errdev("unable to register vbi device\n");
|
|
|
|
retval = -ENODEV;
|
|
|
|
goto fail_unreg;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
|
|
|
|
dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template,
|
|
|
|
VFL_TYPE_RADIO, "radio");
|
|
|
|
if (NULL == dev->radio_dev) {
|
|
|
|
em28xx_errdev("cannot allocate video_device.\n");
|
|
|
|
goto fail_unreg;
|
|
|
|
}
|
|
|
|
retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
|
|
|
|
radio_nr[dev->devno]);
|
|
|
|
if (retval < 0) {
|
|
|
|
em28xx_errdev("can't register radio device\n");
|
|
|
|
goto fail_unreg;
|
|
|
|
}
|
|
|
|
em28xx_info("Registered radio device as /dev/radio%d\n",
|
|
|
|
dev->radio_dev->minor & 0x1f);
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
2006-01-23 19:11:08 +00:00
|
|
|
|
V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc
The usage of videobuf-vmalloc allows to cleanup em28xx logic.
Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):
39113 4876 40 44029 abfd old/em28xx.ko
36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko
Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.
A test with time command presented an even better result:
This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:
The old driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used
The videobuf-based driver:
$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used
Conclusion:
The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13 17:37:52 +00:00
|
|
|
/* init video dma queues */
|
|
|
|
INIT_LIST_HEAD(&dev->vidq.active);
|
|
|
|
INIT_LIST_HEAD(&dev->vidq.queued);
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-04 00:22:38 +00:00
|
|
|
if (dev->has_msp34xx) {
|
|
|
|
/* Send a reset to other chips via gpio */
|
|
|
|
em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1);
|
|
|
|
msleep(3);
|
|
|
|
em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1);
|
|
|
|
msleep(3);
|
|
|
|
}
|
2007-11-11 16:17:17 +00:00
|
|
|
|
2007-11-04 00:22:38 +00:00
|
|
|
video_mux(dev, 0);
|
|
|
|
|
2006-01-23 19:11:08 +00:00
|
|
|
em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
|
|
|
|
dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN,
|
|
|
|
dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2008-01-05 12:57:31 +00:00
|
|
|
mutex_lock(&em28xx_extension_devlist_lock);
|
|
|
|
if (!list_empty(&em28xx_extension_devlist)) {
|
|
|
|
list_for_each_entry(ops, &em28xx_extension_devlist, next) {
|
|
|
|
if (ops->id)
|
|
|
|
ops->init(dev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
mutex_unlock(&em28xx_extension_devlist_lock);
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
return 0;
|
2008-01-05 20:22:01 +00:00
|
|
|
|
|
|
|
fail_unreg:
|
|
|
|
em28xx_release_resources(dev);
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
kfree(dev);
|
|
|
|
return retval;
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2008-01-05 12:59:03 +00:00
|
|
|
#if defined(CONFIG_MODULES) && defined(MODULE)
|
|
|
|
static void request_module_async(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct em28xx *dev = container_of(work,
|
|
|
|
struct em28xx, request_module_wk);
|
|
|
|
|
2008-01-06 12:54:17 +00:00
|
|
|
if (dev->has_audio_class)
|
|
|
|
request_module("snd-usb-audio");
|
|
|
|
else
|
2008-01-05 12:59:03 +00:00
|
|
|
request_module("em28xx-alsa");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void request_modules(struct em28xx *dev)
|
|
|
|
{
|
|
|
|
INIT_WORK(&dev->request_module_wk, request_module_async);
|
|
|
|
schedule_work(&dev->request_module_wk);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define request_modules(dev)
|
|
|
|
#endif /* CONFIG_MODULES */
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
/*
|
2005-11-09 05:38:27 +00:00
|
|
|
* em28xx_usb_probe()
|
2005-11-09 05:37:07 +00:00
|
|
|
* checks for supported devices
|
|
|
|
*/
|
2005-11-09 05:38:27 +00:00
|
|
|
static int em28xx_usb_probe(struct usb_interface *interface,
|
2005-11-09 05:37:07 +00:00
|
|
|
const struct usb_device_id *id)
|
|
|
|
{
|
|
|
|
const struct usb_endpoint_descriptor *endpoint;
|
|
|
|
struct usb_device *udev;
|
2005-11-09 05:38:52 +00:00
|
|
|
struct usb_interface *uif;
|
2005-11-09 05:38:27 +00:00
|
|
|
struct em28xx *dev = NULL;
|
2005-11-09 05:37:07 +00:00
|
|
|
int retval = -ENODEV;
|
2007-11-04 00:20:59 +00:00
|
|
|
int i, nr, ifnum;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
udev = usb_get_dev(interface_to_usbdev(interface));
|
2005-11-09 05:37:32 +00:00
|
|
|
ifnum = interface->altsetting[0].desc.bInterfaceNumber;
|
|
|
|
|
2006-01-23 19:11:08 +00:00
|
|
|
/* Check to see next free device and mark as used */
|
|
|
|
nr=find_first_zero_bit(&em28xx_devused,EM28XX_MAXBOARDS);
|
|
|
|
em28xx_devused|=1<<nr;
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2005-11-09 05:37:24 +00:00
|
|
|
/* Don't register audio interfaces */
|
2005-11-09 05:38:13 +00:00
|
|
|
if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_err(DRIVER_NAME " audio device (%04x:%04x): interface %i, class %i\n",
|
2005-11-09 05:38:13 +00:00
|
|
|
udev->descriptor.idVendor,udev->descriptor.idProduct,
|
|
|
|
ifnum,
|
|
|
|
interface->altsetting[0].desc.bInterfaceClass);
|
2006-01-23 19:11:08 +00:00
|
|
|
|
|
|
|
em28xx_devused&=~(1<<nr);
|
2005-11-09 05:37:24 +00:00
|
|
|
return -ENODEV;
|
2005-11-09 05:38:13 +00:00
|
|
|
}
|
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_err(DRIVER_NAME " new video device (%04x:%04x): interface %i, class %i\n",
|
2005-11-09 05:38:13 +00:00
|
|
|
udev->descriptor.idVendor,udev->descriptor.idProduct,
|
|
|
|
ifnum,
|
|
|
|
interface->altsetting[0].desc.bInterfaceClass);
|
2005-11-09 05:37:24 +00:00
|
|
|
|
2005-11-09 05:37:32 +00:00
|
|
|
endpoint = &interface->cur_altsetting->endpoint[1].desc;
|
|
|
|
|
2007-05-09 06:57:56 +00:00
|
|
|
/* check if the device has the iso in endpoint at the correct place */
|
2005-11-09 05:37:07 +00:00
|
|
|
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
|
|
|
|
USB_ENDPOINT_XFER_ISOC) {
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
|
2006-01-23 19:11:08 +00:00
|
|
|
em28xx_devused&=~(1<<nr);
|
2005-11-09 05:37:07 +00:00
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n");
|
2006-01-23 19:11:08 +00:00
|
|
|
em28xx_devused&=~(1<<nr);
|
2005-11-09 05:37:07 +00:00
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
2006-03-14 20:24:57 +00:00
|
|
|
if (nr >= EM28XX_MAXBOARDS) {
|
2005-11-09 05:38:52 +00:00
|
|
|
printk (DRIVER_NAME ": Supports only %i em28xx boards.\n",EM28XX_MAXBOARDS);
|
2006-01-23 19:11:08 +00:00
|
|
|
em28xx_devused&=~(1<<nr);
|
2005-11-09 05:37:24 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* allocate memory for our device state and initialize it */
|
2006-01-11 21:40:56 +00:00
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
2005-11-09 05:37:24 +00:00
|
|
|
if (dev == NULL) {
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_err(DRIVER_NAME ": out of memory!\n");
|
2006-01-23 19:11:08 +00:00
|
|
|
em28xx_devused&=~(1<<nr);
|
2005-11-09 05:37:24 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
2006-01-23 19:11:08 +00:00
|
|
|
snprintf(dev->name, 29, "em28xx #%d", nr);
|
2007-11-04 00:20:59 +00:00
|
|
|
dev->devno = nr;
|
|
|
|
dev->model = id->driver_info;
|
V4L/DVB (7179): Allow more than one em28xx board
em28xx driver is capable of handling more than one usb device. However, isoc
transfers require a large amount of data to be transfered.
Before this patch, just one em28xx board were enough to allocate more than 50%
URBs:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc=480/800 us (60%), #Int= 0, #Iso= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
So, only one board could use an USB host at the same time. After the patch, it
is possible to use more than one em28xx at the same time, on the same usb host,
if the image size is slower or equal to 345600, since those images will
require about 30% of the URBs:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc=232/800 us (29%), #Int= 0, #Iso= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
So, in thesis, after the patch, it would be possible to use up to 3 boards by
each usb host, if the devices are generating small images.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-08 18:44:25 +00:00
|
|
|
dev->alt = -1;
|
2006-01-23 19:11:08 +00:00
|
|
|
|
2008-01-05 12:59:03 +00:00
|
|
|
/* Checks if audio is provided by some interface */
|
|
|
|
for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
|
|
|
|
uif = udev->config->interface[i];
|
|
|
|
if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
|
|
|
|
dev->has_audio_class = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
printk(KERN_INFO DRIVER_NAME " %s usb audio class\n",
|
|
|
|
dev->has_audio_class ? "Has" : "Doesn't have");
|
|
|
|
|
2005-11-09 05:38:52 +00:00
|
|
|
/* compute alternate max packet sizes */
|
|
|
|
uif = udev->actconfig->interface[0];
|
|
|
|
|
|
|
|
dev->num_alt=uif->num_altsetting;
|
2006-01-23 19:11:08 +00:00
|
|
|
em28xx_info("Alternate settings: %i\n",dev->num_alt);
|
2005-11-09 05:38:52 +00:00
|
|
|
// dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)*
|
|
|
|
dev->alt_max_pkt_size = kmalloc(32*
|
|
|
|
dev->num_alt,GFP_KERNEL);
|
|
|
|
if (dev->alt_max_pkt_size == NULL) {
|
2006-01-23 19:11:08 +00:00
|
|
|
em28xx_errdev("out of memory!\n");
|
|
|
|
em28xx_devused&=~(1<<nr);
|
2007-08-09 21:02:36 +00:00
|
|
|
kfree(dev);
|
2005-11-09 05:38:52 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < dev->num_alt ; i++) {
|
|
|
|
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
|
|
|
|
wMaxPacketSize);
|
|
|
|
dev->alt_max_pkt_size[i] =
|
|
|
|
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
|
2006-01-23 19:11:08 +00:00
|
|
|
em28xx_info("Alternate setting %i, max size= %i\n",i,
|
2005-11-09 05:38:52 +00:00
|
|
|
dev->alt_max_pkt_size[i]);
|
|
|
|
}
|
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
if ((card[nr]>=0)&&(card[nr]<em28xx_bcount))
|
2007-11-04 00:20:59 +00:00
|
|
|
dev->model = card[nr];
|
2005-11-09 05:37:24 +00:00
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
/* allocate device struct */
|
2007-11-04 00:20:59 +00:00
|
|
|
retval = em28xx_init_dev(&dev, udev, nr);
|
2005-11-09 05:37:07 +00:00
|
|
|
if (retval)
|
|
|
|
return retval;
|
|
|
|
|
2007-11-04 00:20:59 +00:00
|
|
|
em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
/* save our data pointer in this interface device */
|
|
|
|
usb_set_intfdata(interface, dev);
|
2008-01-05 12:59:03 +00:00
|
|
|
|
|
|
|
request_modules(dev);
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2005-11-09 05:38:27 +00:00
|
|
|
* em28xx_usb_disconnect()
|
2005-11-09 05:37:07 +00:00
|
|
|
* called when the device gets diconencted
|
|
|
|
* video device will be unregistered on v4l2_close in case it is still open
|
|
|
|
*/
|
2005-11-09 05:38:27 +00:00
|
|
|
static void em28xx_usb_disconnect(struct usb_interface *interface)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
2007-11-04 00:22:38 +00:00
|
|
|
struct em28xx *dev;
|
2008-01-05 12:57:31 +00:00
|
|
|
struct em28xx_ops *ops = NULL;
|
2007-11-04 00:22:38 +00:00
|
|
|
|
|
|
|
dev = usb_get_intfdata(interface);
|
2005-11-09 05:37:07 +00:00
|
|
|
usb_set_intfdata(interface, NULL);
|
|
|
|
|
|
|
|
if (!dev)
|
|
|
|
return;
|
|
|
|
|
2007-11-04 00:22:38 +00:00
|
|
|
em28xx_info("disconnecting %s\n", dev->vdev->name);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2007-11-04 00:22:38 +00:00
|
|
|
/* wait until all current v4l2 io is finished then deallocate resources */
|
2006-02-07 08:49:14 +00:00
|
|
|
mutex_lock(&dev->lock);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
|
|
|
wake_up_interruptible_all(&dev->open);
|
|
|
|
|
|
|
|
if (dev->users) {
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_warn
|
2005-11-09 05:37:07 +00:00
|
|
|
("device /dev/video%d is open! Deregistration and memory "
|
2006-01-23 19:11:08 +00:00
|
|
|
"deallocation are deferred on close.\n",
|
|
|
|
dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN);
|
|
|
|
|
2005-11-09 05:37:07 +00:00
|
|
|
dev->state |= DEV_MISCONFIGURED;
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_uninit_isoc(dev);
|
2005-11-09 05:37:07 +00:00
|
|
|
dev->state |= DEV_DISCONNECTED;
|
|
|
|
wake_up_interruptible(&dev->wait_frame);
|
|
|
|
wake_up_interruptible(&dev->wait_stream);
|
|
|
|
} else {
|
|
|
|
dev->state |= DEV_DISCONNECTED;
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_release_resources(dev);
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
2006-02-07 08:49:14 +00:00
|
|
|
mutex_unlock(&dev->lock);
|
2005-11-09 05:37:07 +00:00
|
|
|
|
2008-01-05 12:57:31 +00:00
|
|
|
mutex_lock(&em28xx_extension_devlist_lock);
|
|
|
|
if (!list_empty(&em28xx_extension_devlist)) {
|
|
|
|
list_for_each_entry(ops, &em28xx_extension_devlist, next) {
|
|
|
|
ops->fini(dev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
mutex_unlock(&em28xx_extension_devlist_lock);
|
|
|
|
|
2005-11-09 05:38:52 +00:00
|
|
|
if (!dev->users) {
|
|
|
|
kfree(dev->alt_max_pkt_size);
|
2005-11-09 05:37:07 +00:00
|
|
|
kfree(dev);
|
2005-11-09 05:38:52 +00:00
|
|
|
}
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
static struct usb_driver em28xx_usb_driver = {
|
|
|
|
.name = "em28xx",
|
|
|
|
.probe = em28xx_usb_probe,
|
|
|
|
.disconnect = em28xx_usb_disconnect,
|
|
|
|
.id_table = em28xx_id_table,
|
2005-11-09 05:37:07 +00:00
|
|
|
};
|
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
static int __init em28xx_module_init(void)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
|
|
|
int result;
|
|
|
|
|
|
|
|
printk(KERN_INFO DRIVER_NAME " v4l2 driver version %d.%d.%d loaded\n",
|
2005-11-09 05:38:27 +00:00
|
|
|
(EM28XX_VERSION_CODE >> 16) & 0xff,
|
|
|
|
(EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff);
|
2005-11-09 05:37:07 +00:00
|
|
|
#ifdef SNAPSHOT
|
|
|
|
printk(KERN_INFO DRIVER_NAME " snapshot date %04d-%02d-%02d\n",
|
|
|
|
SNAPSHOT / 10000, (SNAPSHOT / 100) % 100, SNAPSHOT % 100);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* register this driver with the USB subsystem */
|
2005-11-09 05:38:27 +00:00
|
|
|
result = usb_register(&em28xx_usb_driver);
|
2005-11-09 05:37:07 +00:00
|
|
|
if (result)
|
2005-11-09 05:38:27 +00:00
|
|
|
em28xx_err(DRIVER_NAME
|
2005-11-09 05:37:07 +00:00
|
|
|
" usb_register failed. Error number %d.\n", result);
|
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
static void __exit em28xx_module_exit(void)
|
2005-11-09 05:37:07 +00:00
|
|
|
{
|
|
|
|
/* deregister this driver with the USB subsystem */
|
2005-11-09 05:38:27 +00:00
|
|
|
usb_deregister(&em28xx_usb_driver);
|
2005-11-09 05:37:07 +00:00
|
|
|
}
|
|
|
|
|
2005-11-09 05:38:27 +00:00
|
|
|
module_init(em28xx_module_init);
|
|
|
|
module_exit(em28xx_module_exit);
|