iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
/******************************************************************************
|
|
|
|
*
|
|
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
|
|
* redistributing this file, you may do so under either license.
|
|
|
|
*
|
|
|
|
* GPL LICENSE SUMMARY
|
|
|
|
*
|
|
|
|
* Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful, but
|
|
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
|
|
|
|
* USA
|
|
|
|
*
|
|
|
|
* The full GNU General Public License is included in this distribution
|
|
|
|
* in the file called LICENSE.GPL.
|
|
|
|
*
|
|
|
|
* Contact Information:
|
|
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*
|
|
|
|
* BSD LICENSE
|
|
|
|
*
|
|
|
|
* Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
*
|
|
|
|
* * Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
* distribution.
|
|
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
|
|
* contributors may be used to endorse or promote products derived
|
|
|
|
* from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*
|
|
|
|
*****************************************************************************/
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
2011-09-06 16:31:19 +00:00
|
|
|
#include <linux/dma-mapping.h>
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
#include <net/net_namespace.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <net/cfg80211.h>
|
|
|
|
#include <net/mac80211.h>
|
|
|
|
#include <net/netlink.h>
|
|
|
|
|
|
|
|
#include "iwl-dev.h"
|
|
|
|
#include "iwl-core.h"
|
|
|
|
#include "iwl-debug.h"
|
|
|
|
#include "iwl-io.h"
|
|
|
|
#include "iwl-agn.h"
|
|
|
|
#include "iwl-testmode.h"
|
2011-07-08 15:46:16 +00:00
|
|
|
#include "iwl-trans.h"
|
2011-12-01 09:12:50 +00:00
|
|
|
#include "iwl-bus.h"
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
|
|
|
|
/* The TLVs used in the gnl message policy between the kernel module and
|
|
|
|
* user space application. iwl_testmode_gnl_msg_policy is to be carried
|
|
|
|
* through the NL80211_CMD_TESTMODE channel regulated by nl80211.
|
|
|
|
* See iwl-testmode.h
|
|
|
|
*/
|
|
|
|
static
|
|
|
|
struct nla_policy iwl_testmode_gnl_msg_policy[IWL_TM_ATTR_MAX] = {
|
|
|
|
[IWL_TM_ATTR_COMMAND] = { .type = NLA_U32, },
|
|
|
|
|
|
|
|
[IWL_TM_ATTR_UCODE_CMD_ID] = { .type = NLA_U8, },
|
|
|
|
[IWL_TM_ATTR_UCODE_CMD_DATA] = { .type = NLA_UNSPEC, },
|
|
|
|
|
|
|
|
[IWL_TM_ATTR_REG_OFFSET] = { .type = NLA_U32, },
|
|
|
|
[IWL_TM_ATTR_REG_VALUE8] = { .type = NLA_U8, },
|
|
|
|
[IWL_TM_ATTR_REG_VALUE32] = { .type = NLA_U32, },
|
|
|
|
|
|
|
|
[IWL_TM_ATTR_SYNC_RSP] = { .type = NLA_UNSPEC, },
|
|
|
|
[IWL_TM_ATTR_UCODE_RX_PKT] = { .type = NLA_UNSPEC, },
|
2011-05-06 17:21:28 +00:00
|
|
|
|
2011-05-04 01:05:12 +00:00
|
|
|
[IWL_TM_ATTR_EEPROM] = { .type = NLA_UNSPEC, },
|
|
|
|
|
2011-05-06 17:21:28 +00:00
|
|
|
[IWL_TM_ATTR_TRACE_ADDR] = { .type = NLA_UNSPEC, },
|
2011-05-31 15:03:02 +00:00
|
|
|
[IWL_TM_ATTR_TRACE_DUMP] = { .type = NLA_UNSPEC, },
|
2011-05-30 17:29:37 +00:00
|
|
|
[IWL_TM_ATTR_TRACE_SIZE] = { .type = NLA_U32, },
|
2011-05-06 17:21:28 +00:00
|
|
|
|
2011-05-04 01:05:13 +00:00
|
|
|
[IWL_TM_ATTR_FIXRATE] = { .type = NLA_U32, },
|
2011-05-30 17:29:37 +00:00
|
|
|
|
2011-07-08 15:46:26 +00:00
|
|
|
[IWL_TM_ATTR_UCODE_OWNER] = { .type = NLA_U8, },
|
2011-11-23 07:03:39 +00:00
|
|
|
|
|
|
|
[IWL_TM_ATTR_SRAM_ADDR] = { .type = NLA_U32, },
|
|
|
|
[IWL_TM_ATTR_SRAM_SIZE] = { .type = NLA_U32, },
|
|
|
|
[IWL_TM_ATTR_SRAM_DUMP] = { .type = NLA_UNSPEC, },
|
2011-11-28 08:55:38 +00:00
|
|
|
|
|
|
|
[IWL_TM_ATTR_FW_VERSION] = { .type = NLA_U32, },
|
2011-12-01 09:12:50 +00:00
|
|
|
[IWL_TM_ATTR_DEVICE_ID] = { .type = NLA_U32, },
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* See the struct iwl_rx_packet in iwl-commands.h for the format of the
|
|
|
|
* received events from the device
|
|
|
|
*/
|
|
|
|
static inline int get_event_length(struct iwl_rx_mem_buffer *rxb)
|
|
|
|
{
|
|
|
|
struct iwl_rx_packet *pkt = rxb_addr(rxb);
|
|
|
|
if (pkt)
|
|
|
|
return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
|
|
|
|
else
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function multicasts the spontaneous messages from the device to the
|
|
|
|
* user space. It is invoked whenever there is a received messages
|
|
|
|
* from the device. This function is called within the ISR of the rx handlers
|
|
|
|
* in iwlagn driver.
|
|
|
|
*
|
|
|
|
* The parsing of the message content is left to the user space application,
|
|
|
|
* The message content is treated as unattacked raw data and is encapsulated
|
|
|
|
* with IWL_TM_ATTR_UCODE_RX_PKT multicasting to the user space.
|
|
|
|
*
|
|
|
|
* @priv: the instance of iwlwifi device
|
|
|
|
* @rxb: pointer to rx data content received by the ISR
|
|
|
|
*
|
|
|
|
* See the message policies and TLVs in iwl_testmode_gnl_msg_policy[].
|
|
|
|
* For the messages multicasting to the user application, the mandatory
|
|
|
|
* TLV fields are :
|
|
|
|
* IWL_TM_ATTR_COMMAND must be IWL_TM_CMD_DEV2APP_UCODE_RX_PKT
|
|
|
|
* IWL_TM_ATTR_UCODE_RX_PKT for carrying the message content
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void iwl_testmode_ucode_rx_pkt(struct iwl_priv *priv,
|
|
|
|
struct iwl_rx_mem_buffer *rxb)
|
|
|
|
{
|
|
|
|
struct ieee80211_hw *hw = priv->hw;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
void *data;
|
|
|
|
int length;
|
|
|
|
|
|
|
|
data = (void *)rxb_addr(rxb);
|
|
|
|
length = get_event_length(rxb);
|
|
|
|
|
|
|
|
if (!data || length == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
skb = cfg80211_testmode_alloc_event_skb(hw->wiphy, 20 + length,
|
|
|
|
GFP_ATOMIC);
|
|
|
|
if (skb == NULL) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Run out of memory for messages to user space ?\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND, IWL_TM_CMD_DEV2APP_UCODE_RX_PKT);
|
|
|
|
NLA_PUT(skb, IWL_TM_ATTR_UCODE_RX_PKT, length, data);
|
|
|
|
cfg80211_testmode_event(skb, GFP_ATOMIC);
|
|
|
|
return;
|
|
|
|
|
|
|
|
nla_put_failure:
|
|
|
|
kfree_skb(skb);
|
|
|
|
IWL_DEBUG_INFO(priv, "Ouch, overran buffer, check allocation!\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
void iwl_testmode_init(struct iwl_priv *priv)
|
|
|
|
{
|
|
|
|
priv->pre_rx_handler = iwl_testmode_ucode_rx_pkt;
|
2011-05-06 17:21:28 +00:00
|
|
|
priv->testmode_trace.trace_enabled = false;
|
2011-11-23 07:03:39 +00:00
|
|
|
priv->testmode_sram.sram_readed = false;
|
|
|
|
}
|
|
|
|
|
2011-11-23 15:08:22 +00:00
|
|
|
static void iwl_sram_cleanup(struct iwl_priv *priv)
|
2011-11-23 07:03:39 +00:00
|
|
|
{
|
|
|
|
if (priv->testmode_sram.sram_readed) {
|
|
|
|
kfree(priv->testmode_sram.buff_addr);
|
|
|
|
priv->testmode_sram.buff_addr = NULL;
|
|
|
|
priv->testmode_sram.buff_size = 0;
|
|
|
|
priv->testmode_sram.num_chunks = 0;
|
|
|
|
priv->testmode_sram.sram_readed = false;
|
|
|
|
}
|
2011-05-06 17:21:28 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void iwl_trace_cleanup(struct iwl_priv *priv)
|
|
|
|
{
|
|
|
|
if (priv->testmode_trace.trace_enabled) {
|
|
|
|
if (priv->testmode_trace.cpu_addr &&
|
|
|
|
priv->testmode_trace.dma_addr)
|
2011-10-10 14:26:56 +00:00
|
|
|
dma_free_coherent(bus(priv)->dev,
|
2011-05-30 17:29:37 +00:00
|
|
|
priv->testmode_trace.total_size,
|
2011-05-06 17:21:28 +00:00
|
|
|
priv->testmode_trace.cpu_addr,
|
|
|
|
priv->testmode_trace.dma_addr);
|
|
|
|
priv->testmode_trace.trace_enabled = false;
|
|
|
|
priv->testmode_trace.cpu_addr = NULL;
|
|
|
|
priv->testmode_trace.trace_addr = NULL;
|
|
|
|
priv->testmode_trace.dma_addr = 0;
|
2011-05-30 17:29:37 +00:00
|
|
|
priv->testmode_trace.buff_size = 0;
|
|
|
|
priv->testmode_trace.total_size = 0;
|
2011-05-06 17:21:28 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void iwl_testmode_cleanup(struct iwl_priv *priv)
|
|
|
|
{
|
|
|
|
iwl_trace_cleanup(priv);
|
2011-11-23 07:03:39 +00:00
|
|
|
iwl_sram_cleanup(priv);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function handles the user application commands to the ucode.
|
|
|
|
*
|
|
|
|
* It retrieves the mandatory fields IWL_TM_ATTR_UCODE_CMD_ID and
|
|
|
|
* IWL_TM_ATTR_UCODE_CMD_DATA and calls to the handler to send the
|
|
|
|
* host command to the ucode.
|
|
|
|
*
|
|
|
|
* If any mandatory field is missing, -ENOMSG is replied to the user space
|
|
|
|
* application; otherwise, the actual execution result of the host command to
|
|
|
|
* ucode is replied.
|
|
|
|
*
|
|
|
|
* @hw: ieee80211_hw object that represents the device
|
|
|
|
* @tb: gnl message fields from the user space
|
|
|
|
*/
|
|
|
|
static int iwl_testmode_ucode(struct ieee80211_hw *hw, struct nlattr **tb)
|
|
|
|
{
|
|
|
|
struct iwl_priv *priv = hw->priv;
|
|
|
|
struct iwl_host_cmd cmd;
|
|
|
|
|
|
|
|
memset(&cmd, 0, sizeof(struct iwl_host_cmd));
|
|
|
|
|
|
|
|
if (!tb[IWL_TM_ATTR_UCODE_CMD_ID] ||
|
|
|
|
!tb[IWL_TM_ATTR_UCODE_CMD_DATA]) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error finding ucode command mandatory fields\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
}
|
|
|
|
|
2011-07-08 15:46:25 +00:00
|
|
|
cmd.flags = CMD_ON_DEMAND;
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
cmd.id = nla_get_u8(tb[IWL_TM_ATTR_UCODE_CMD_ID]);
|
2011-05-04 14:50:38 +00:00
|
|
|
cmd.data[0] = nla_data(tb[IWL_TM_ATTR_UCODE_CMD_DATA]);
|
|
|
|
cmd.len[0] = nla_len(tb[IWL_TM_ATTR_UCODE_CMD_DATA]);
|
2011-05-13 18:57:40 +00:00
|
|
|
cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
IWL_INFO(priv, "testmode ucode command ID 0x%x, flags 0x%x,"
|
2011-05-04 14:50:38 +00:00
|
|
|
" len %d\n", cmd.id, cmd.flags, cmd.len[0]);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
/* ok, let's submit the command to ucode */
|
iwlagn: bus layer chooses its transport layer
Remove iwl_transport_register which was a W/A. The bus layer knows what
transport to use. So now, the bus layer gives the upper layer a pointer to the
iwl_trans_ops struct that it wants to use. The upper layer then, allocates the
desired transport layer using iwl_trans_ops->alloc function.
As a result of this, priv->trans, no longer exists, priv holds a pointer to
iwl_shared, which holds a pointer to iwl_trans. This required to change all the
calls to the transport layer from upper layer. While we were at it, trans_X
inlines have been renamed to iwl_trans_X to avoid confusions, which of course
required to rename the functions inside the transport layer because of
conflicts in names. So the static API functions inside the transport layer
implementation have been renamed to iwl_trans_pcie_X.
Until now, the IRQ / Tasklet were initialized in iwl_transport_layer. This is
confusing since the registration doesn't mean to request IRQ, so I added a
handler for that.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26 06:10:48 +00:00
|
|
|
return iwl_trans_send_cmd(trans(priv), &cmd);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function handles the user application commands for register access.
|
|
|
|
*
|
|
|
|
* It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
|
|
|
|
* handlers respectively.
|
|
|
|
*
|
|
|
|
* If it's an unknown commdn ID, -ENOSYS is returned; or -ENOMSG if the
|
|
|
|
* mandatory fields(IWL_TM_ATTR_REG_OFFSET,IWL_TM_ATTR_REG_VALUE32,
|
|
|
|
* IWL_TM_ATTR_REG_VALUE8) are missing; Otherwise 0 is replied indicating
|
|
|
|
* the success of the command execution.
|
|
|
|
*
|
|
|
|
* If IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_READ32, the register read
|
|
|
|
* value is returned with IWL_TM_ATTR_REG_VALUE32.
|
|
|
|
*
|
|
|
|
* @hw: ieee80211_hw object that represents the device
|
|
|
|
* @tb: gnl message fields from the user space
|
|
|
|
*/
|
|
|
|
static int iwl_testmode_reg(struct ieee80211_hw *hw, struct nlattr **tb)
|
|
|
|
{
|
|
|
|
struct iwl_priv *priv = hw->priv;
|
|
|
|
u32 ofs, val32;
|
|
|
|
u8 val8;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
int status = 0;
|
|
|
|
|
|
|
|
if (!tb[IWL_TM_ATTR_REG_OFFSET]) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error finding register offset\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
}
|
|
|
|
ofs = nla_get_u32(tb[IWL_TM_ATTR_REG_OFFSET]);
|
|
|
|
IWL_INFO(priv, "testmode register access command offset 0x%x\n", ofs);
|
|
|
|
|
|
|
|
switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
|
2011-11-16 03:24:32 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32:
|
2011-08-26 06:11:14 +00:00
|
|
|
val32 = iwl_read32(bus(priv), ofs);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
IWL_INFO(priv, "32bit value to read 0x%x\n", val32);
|
|
|
|
|
|
|
|
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20);
|
|
|
|
if (!skb) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error allocating memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
NLA_PUT_U32(skb, IWL_TM_ATTR_REG_VALUE32, val32);
|
|
|
|
status = cfg80211_testmode_reply(skb);
|
|
|
|
if (status < 0)
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error sending msg : %d\n", status);
|
|
|
|
break;
|
2011-11-16 03:24:32 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32:
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
if (!tb[IWL_TM_ATTR_REG_VALUE32]) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error finding value to write\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
} else {
|
|
|
|
val32 = nla_get_u32(tb[IWL_TM_ATTR_REG_VALUE32]);
|
|
|
|
IWL_INFO(priv, "32bit value to write 0x%x\n", val32);
|
2011-08-26 06:11:14 +00:00
|
|
|
iwl_write32(bus(priv), ofs, val32);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
}
|
|
|
|
break;
|
2011-11-16 03:24:32 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8:
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
if (!tb[IWL_TM_ATTR_REG_VALUE8]) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error finding value to write\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
} else {
|
|
|
|
val8 = nla_get_u8(tb[IWL_TM_ATTR_REG_VALUE8]);
|
|
|
|
IWL_INFO(priv, "8bit value to write 0x%x\n", val8);
|
2011-08-26 06:11:14 +00:00
|
|
|
iwl_write8(bus(priv), ofs, val8);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
}
|
|
|
|
break;
|
2011-11-16 03:24:32 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_INDIRECT_REG_READ32:
|
|
|
|
val32 = iwl_read_prph(bus(priv), ofs);
|
|
|
|
IWL_INFO(priv, "32bit value to read 0x%x\n", val32);
|
|
|
|
|
|
|
|
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20);
|
|
|
|
if (!skb) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error allocating memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
NLA_PUT_U32(skb, IWL_TM_ATTR_REG_VALUE32, val32);
|
|
|
|
status = cfg80211_testmode_reply(skb);
|
|
|
|
if (status < 0)
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error sending msg : %d\n", status);
|
|
|
|
break;
|
|
|
|
case IWL_TM_CMD_APP2DEV_INDIRECT_REG_WRITE32:
|
|
|
|
if (!tb[IWL_TM_ATTR_REG_VALUE32]) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error finding value to write\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
} else {
|
|
|
|
val32 = nla_get_u32(tb[IWL_TM_ATTR_REG_VALUE32]);
|
|
|
|
IWL_INFO(priv, "32bit value to write 0x%x\n", val32);
|
|
|
|
iwl_write_prph(bus(priv), ofs, val32);
|
|
|
|
}
|
|
|
|
break;
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
default:
|
|
|
|
IWL_DEBUG_INFO(priv, "Unknown testmode register command ID\n");
|
|
|
|
return -ENOSYS;
|
|
|
|
}
|
|
|
|
|
|
|
|
return status;
|
|
|
|
|
|
|
|
nla_put_failure:
|
|
|
|
kfree_skb(skb);
|
|
|
|
return -EMSGSIZE;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int iwl_testmode_cfg_init_calib(struct iwl_priv *priv)
|
|
|
|
{
|
|
|
|
struct iwl_notification_wait calib_wait;
|
|
|
|
int ret;
|
|
|
|
|
2011-11-29 00:13:19 +00:00
|
|
|
iwl_init_notification_wait(priv->shrd, &calib_wait,
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
CALIBRATION_COMPLETE_NOTIFICATION,
|
|
|
|
NULL, NULL);
|
|
|
|
ret = iwlagn_init_alive_start(priv);
|
|
|
|
if (ret) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error configuring init calibration: %d\n", ret);
|
|
|
|
goto cfg_init_calib_error;
|
|
|
|
}
|
|
|
|
|
2011-11-29 00:13:19 +00:00
|
|
|
ret = iwl_wait_notification(priv->shrd, &calib_wait, 2 * HZ);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
if (ret)
|
|
|
|
IWL_DEBUG_INFO(priv, "Error detecting"
|
|
|
|
" CALIBRATION_COMPLETE_NOTIFICATION: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
cfg_init_calib_error:
|
2011-11-29 00:13:19 +00:00
|
|
|
iwl_remove_notification(priv->shrd, &calib_wait);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function handles the user application commands for driver.
|
|
|
|
*
|
|
|
|
* It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
|
|
|
|
* handlers respectively.
|
|
|
|
*
|
|
|
|
* If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned
|
|
|
|
* value of the actual command execution is replied to the user application.
|
|
|
|
*
|
|
|
|
* If there's any message responding to the user space, IWL_TM_ATTR_SYNC_RSP
|
|
|
|
* is used for carry the message while IWL_TM_ATTR_COMMAND must set to
|
|
|
|
* IWL_TM_CMD_DEV2APP_SYNC_RSP.
|
|
|
|
*
|
|
|
|
* @hw: ieee80211_hw object that represents the device
|
|
|
|
* @tb: gnl message fields from the user space
|
|
|
|
*/
|
|
|
|
static int iwl_testmode_driver(struct ieee80211_hw *hw, struct nlattr **tb)
|
|
|
|
{
|
|
|
|
struct iwl_priv *priv = hw->priv;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
unsigned char *rsp_data_ptr = NULL;
|
|
|
|
int status = 0, rsp_data_len = 0;
|
2011-12-01 09:12:50 +00:00
|
|
|
char buf[32], *ptr = NULL;
|
|
|
|
unsigned int num, devid;
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
|
|
|
|
switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
|
|
|
|
case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
|
|
|
|
rsp_data_ptr = (unsigned char *)priv->cfg->name;
|
|
|
|
rsp_data_len = strlen(priv->cfg->name);
|
|
|
|
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
|
|
|
|
rsp_data_len + 20);
|
|
|
|
if (!skb) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error allocating memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND,
|
|
|
|
IWL_TM_CMD_DEV2APP_SYNC_RSP);
|
|
|
|
NLA_PUT(skb, IWL_TM_ATTR_SYNC_RSP,
|
|
|
|
rsp_data_len, rsp_data_ptr);
|
|
|
|
status = cfg80211_testmode_reply(skb);
|
|
|
|
if (status < 0)
|
|
|
|
IWL_DEBUG_INFO(priv, "Error sending msg : %d\n",
|
|
|
|
status);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
|
2011-11-10 14:55:08 +00:00
|
|
|
status = iwlagn_load_ucode_wait_alive(priv, IWL_UCODE_INIT);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
if (status)
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error loading init ucode: %d\n", status);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
|
|
|
|
iwl_testmode_cfg_init_calib(priv);
|
iwlagn: bus layer chooses its transport layer
Remove iwl_transport_register which was a W/A. The bus layer knows what
transport to use. So now, the bus layer gives the upper layer a pointer to the
iwl_trans_ops struct that it wants to use. The upper layer then, allocates the
desired transport layer using iwl_trans_ops->alloc function.
As a result of this, priv->trans, no longer exists, priv holds a pointer to
iwl_shared, which holds a pointer to iwl_trans. This required to change all the
calls to the transport layer from upper layer. While we were at it, trans_X
inlines have been renamed to iwl_trans_X to avoid confusions, which of course
required to rename the functions inside the transport layer because of
conflicts in names. So the static API functions inside the transport layer
implementation have been renamed to iwl_trans_pcie_X.
Until now, the IRQ / Tasklet were initialized in iwl_transport_layer. This is
confusing since the registration doesn't mean to request IRQ, so I added a
handler for that.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26 06:10:48 +00:00
|
|
|
iwl_trans_stop_device(trans(priv));
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
|
2011-11-10 14:55:08 +00:00
|
|
|
status = iwlagn_load_ucode_wait_alive(priv, IWL_UCODE_REGULAR);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
if (status) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error loading runtime ucode: %d\n", status);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
status = iwl_alive_start(priv);
|
|
|
|
if (status)
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error starting the device: %d\n", status);
|
|
|
|
break;
|
|
|
|
|
2011-11-25 06:26:53 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW:
|
|
|
|
iwl_scan_cancel_timeout(priv, 200);
|
|
|
|
iwl_trans_stop_device(trans(priv));
|
|
|
|
status = iwlagn_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN);
|
|
|
|
if (status) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error loading WOWLAN ucode: %d\n", status);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
status = iwl_alive_start(priv);
|
|
|
|
if (status)
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error starting the device: %d\n", status);
|
|
|
|
break;
|
|
|
|
|
2011-05-04 01:05:12 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_GET_EEPROM:
|
2011-11-30 23:37:32 +00:00
|
|
|
if (priv->shrd->eeprom) {
|
2011-05-04 01:05:12 +00:00
|
|
|
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
|
|
|
|
priv->cfg->base_params->eeprom_size + 20);
|
|
|
|
if (!skb) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error allocating memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND,
|
|
|
|
IWL_TM_CMD_DEV2APP_EEPROM_RSP);
|
|
|
|
NLA_PUT(skb, IWL_TM_ATTR_EEPROM,
|
|
|
|
priv->cfg->base_params->eeprom_size,
|
2011-11-30 23:37:32 +00:00
|
|
|
priv->shrd->eeprom);
|
2011-05-04 01:05:12 +00:00
|
|
|
status = cfg80211_testmode_reply(skb);
|
|
|
|
if (status < 0)
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error sending msg : %d\n",
|
|
|
|
status);
|
|
|
|
} else
|
|
|
|
return -EFAULT;
|
|
|
|
break;
|
|
|
|
|
2011-05-04 01:05:13 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_FIXRATE_REQ:
|
|
|
|
if (!tb[IWL_TM_ATTR_FIXRATE]) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error finding fixrate setting\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
}
|
2011-07-08 15:46:28 +00:00
|
|
|
priv->tm_fixed_rate = nla_get_u32(tb[IWL_TM_ATTR_FIXRATE]);
|
2011-05-04 01:05:13 +00:00
|
|
|
break;
|
|
|
|
|
2011-11-28 08:55:38 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_GET_FW_VERSION:
|
|
|
|
IWL_INFO(priv, "uCode version raw: 0x%x\n", priv->ucode_ver);
|
|
|
|
|
|
|
|
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20);
|
|
|
|
if (!skb) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error allocating memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
NLA_PUT_U32(skb, IWL_TM_ATTR_FW_VERSION, priv->ucode_ver);
|
|
|
|
status = cfg80211_testmode_reply(skb);
|
|
|
|
if (status < 0)
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error sending msg : %d\n", status);
|
|
|
|
break;
|
|
|
|
|
2011-12-01 09:12:50 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_GET_DEVICE_ID:
|
|
|
|
bus_get_hw_id(bus(priv), buf, sizeof(buf));
|
|
|
|
ptr = buf;
|
|
|
|
strsep(&ptr, ":");
|
|
|
|
sscanf(strsep(&ptr, ":"), "%x", &num);
|
|
|
|
sscanf(strsep(&ptr, ":"), "%x", &devid);
|
|
|
|
IWL_INFO(priv, "Device ID = 0x%04x, SubDevice ID= 0x%04x\n",
|
|
|
|
num, devid);
|
|
|
|
devid |= (num << 16);
|
|
|
|
|
|
|
|
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20);
|
|
|
|
if (!skb) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error allocating memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
NLA_PUT_U32(skb, IWL_TM_ATTR_DEVICE_ID, devid);
|
|
|
|
status = cfg80211_testmode_reply(skb);
|
|
|
|
if (status < 0)
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error sending msg : %d\n", status);
|
|
|
|
break;
|
|
|
|
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
default:
|
|
|
|
IWL_DEBUG_INFO(priv, "Unknown testmode driver command ID\n");
|
|
|
|
return -ENOSYS;
|
|
|
|
}
|
|
|
|
return status;
|
|
|
|
|
|
|
|
nla_put_failure:
|
|
|
|
kfree_skb(skb);
|
|
|
|
return -EMSGSIZE;
|
|
|
|
}
|
|
|
|
|
2011-05-06 17:21:28 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* This function handles the user application commands for uCode trace
|
|
|
|
*
|
|
|
|
* It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
|
|
|
|
* handlers respectively.
|
|
|
|
*
|
|
|
|
* If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned
|
|
|
|
* value of the actual command execution is replied to the user application.
|
|
|
|
*
|
|
|
|
* @hw: ieee80211_hw object that represents the device
|
|
|
|
* @tb: gnl message fields from the user space
|
|
|
|
*/
|
|
|
|
static int iwl_testmode_trace(struct ieee80211_hw *hw, struct nlattr **tb)
|
|
|
|
{
|
|
|
|
struct iwl_priv *priv = hw->priv;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
int status = 0;
|
2011-10-10 14:26:56 +00:00
|
|
|
struct device *dev = bus(priv)->dev;
|
2011-05-06 17:21:28 +00:00
|
|
|
|
|
|
|
switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
|
|
|
|
case IWL_TM_CMD_APP2DEV_BEGIN_TRACE:
|
|
|
|
if (priv->testmode_trace.trace_enabled)
|
|
|
|
return -EBUSY;
|
|
|
|
|
2011-05-30 17:29:37 +00:00
|
|
|
if (!tb[IWL_TM_ATTR_TRACE_SIZE])
|
|
|
|
priv->testmode_trace.buff_size = TRACE_BUFF_SIZE_DEF;
|
|
|
|
else
|
|
|
|
priv->testmode_trace.buff_size =
|
|
|
|
nla_get_u32(tb[IWL_TM_ATTR_TRACE_SIZE]);
|
|
|
|
if (!priv->testmode_trace.buff_size)
|
|
|
|
return -EINVAL;
|
|
|
|
if (priv->testmode_trace.buff_size < TRACE_BUFF_SIZE_MIN ||
|
|
|
|
priv->testmode_trace.buff_size > TRACE_BUFF_SIZE_MAX)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
priv->testmode_trace.total_size =
|
|
|
|
priv->testmode_trace.buff_size + TRACE_BUFF_PADD;
|
2011-05-06 17:21:28 +00:00
|
|
|
priv->testmode_trace.cpu_addr =
|
|
|
|
dma_alloc_coherent(dev,
|
2011-05-30 17:29:37 +00:00
|
|
|
priv->testmode_trace.total_size,
|
2011-05-06 17:21:28 +00:00
|
|
|
&priv->testmode_trace.dma_addr,
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!priv->testmode_trace.cpu_addr)
|
|
|
|
return -ENOMEM;
|
|
|
|
priv->testmode_trace.trace_enabled = true;
|
|
|
|
priv->testmode_trace.trace_addr = (u8 *)PTR_ALIGN(
|
|
|
|
priv->testmode_trace.cpu_addr, 0x100);
|
|
|
|
memset(priv->testmode_trace.trace_addr, 0x03B,
|
2011-05-30 17:29:37 +00:00
|
|
|
priv->testmode_trace.buff_size);
|
2011-05-06 17:21:28 +00:00
|
|
|
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
|
|
|
|
sizeof(priv->testmode_trace.dma_addr) + 20);
|
|
|
|
if (!skb) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error allocating memory\n");
|
|
|
|
iwl_trace_cleanup(priv);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
NLA_PUT(skb, IWL_TM_ATTR_TRACE_ADDR,
|
|
|
|
sizeof(priv->testmode_trace.dma_addr),
|
|
|
|
(u64 *)&priv->testmode_trace.dma_addr);
|
|
|
|
status = cfg80211_testmode_reply(skb);
|
|
|
|
if (status < 0) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error sending msg : %d\n",
|
|
|
|
status);
|
|
|
|
}
|
2011-05-31 15:03:02 +00:00
|
|
|
priv->testmode_trace.num_chunks =
|
|
|
|
DIV_ROUND_UP(priv->testmode_trace.buff_size,
|
2011-11-23 07:05:02 +00:00
|
|
|
DUMP_CHUNK_SIZE);
|
2011-05-06 17:21:28 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case IWL_TM_CMD_APP2DEV_END_TRACE:
|
|
|
|
iwl_trace_cleanup(priv);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
IWL_DEBUG_INFO(priv, "Unknown testmode mem command ID\n");
|
|
|
|
return -ENOSYS;
|
|
|
|
}
|
|
|
|
return status;
|
|
|
|
|
|
|
|
nla_put_failure:
|
|
|
|
kfree_skb(skb);
|
|
|
|
if (nla_get_u32(tb[IWL_TM_ATTR_COMMAND]) ==
|
|
|
|
IWL_TM_CMD_APP2DEV_BEGIN_TRACE)
|
|
|
|
iwl_trace_cleanup(priv);
|
|
|
|
return -EMSGSIZE;
|
|
|
|
}
|
|
|
|
|
2011-05-31 15:03:02 +00:00
|
|
|
static int iwl_testmode_trace_dump(struct ieee80211_hw *hw, struct nlattr **tb,
|
|
|
|
struct sk_buff *skb,
|
|
|
|
struct netlink_callback *cb)
|
|
|
|
{
|
|
|
|
struct iwl_priv *priv = hw->priv;
|
|
|
|
int idx, length;
|
|
|
|
|
|
|
|
if (priv->testmode_trace.trace_enabled &&
|
|
|
|
priv->testmode_trace.trace_addr) {
|
|
|
|
idx = cb->args[4];
|
|
|
|
if (idx >= priv->testmode_trace.num_chunks)
|
|
|
|
return -ENOENT;
|
2011-11-23 07:05:02 +00:00
|
|
|
length = DUMP_CHUNK_SIZE;
|
2011-05-31 15:03:02 +00:00
|
|
|
if (((idx + 1) == priv->testmode_trace.num_chunks) &&
|
2011-11-23 07:05:02 +00:00
|
|
|
(priv->testmode_trace.buff_size % DUMP_CHUNK_SIZE))
|
2011-05-31 15:03:02 +00:00
|
|
|
length = priv->testmode_trace.buff_size %
|
2011-11-23 07:05:02 +00:00
|
|
|
DUMP_CHUNK_SIZE;
|
2011-05-31 15:03:02 +00:00
|
|
|
|
|
|
|
NLA_PUT(skb, IWL_TM_ATTR_TRACE_DUMP, length,
|
|
|
|
priv->testmode_trace.trace_addr +
|
2011-11-23 07:05:02 +00:00
|
|
|
(DUMP_CHUNK_SIZE * idx));
|
2011-05-31 15:03:02 +00:00
|
|
|
idx++;
|
|
|
|
cb->args[4] = idx;
|
|
|
|
return 0;
|
|
|
|
} else
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
nla_put_failure:
|
|
|
|
return -ENOBUFS;
|
|
|
|
}
|
|
|
|
|
2011-07-08 15:46:26 +00:00
|
|
|
/*
|
|
|
|
* This function handles the user application switch ucode ownership.
|
|
|
|
*
|
|
|
|
* It retrieves the mandatory fields IWL_TM_ATTR_UCODE_OWNER and
|
|
|
|
* decide who the current owner of the uCode
|
|
|
|
*
|
|
|
|
* If the current owner is OWNERSHIP_TM, then the only host command
|
|
|
|
* can deliver to uCode is from testmode, all the other host commands
|
|
|
|
* will dropped.
|
|
|
|
*
|
|
|
|
* default driver is the owner of uCode in normal operational mode
|
|
|
|
*
|
|
|
|
* @hw: ieee80211_hw object that represents the device
|
|
|
|
* @tb: gnl message fields from the user space
|
|
|
|
*/
|
|
|
|
static int iwl_testmode_ownership(struct ieee80211_hw *hw, struct nlattr **tb)
|
|
|
|
{
|
|
|
|
struct iwl_priv *priv = hw->priv;
|
|
|
|
u8 owner;
|
|
|
|
|
|
|
|
if (!tb[IWL_TM_ATTR_UCODE_OWNER]) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error finding ucode owner\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
}
|
|
|
|
|
|
|
|
owner = nla_get_u8(tb[IWL_TM_ATTR_UCODE_OWNER]);
|
|
|
|
if ((owner == IWL_OWNERSHIP_DRIVER) || (owner == IWL_OWNERSHIP_TM))
|
2011-08-26 06:11:19 +00:00
|
|
|
priv->shrd->ucode_owner = owner;
|
2011-07-08 15:46:26 +00:00
|
|
|
else {
|
|
|
|
IWL_DEBUG_INFO(priv, "Invalid owner\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-11-23 07:03:39 +00:00
|
|
|
/*
|
|
|
|
* This function handles the user application commands for SRAM data dump
|
|
|
|
*
|
|
|
|
* It retrieves the mandatory fields IWL_TM_ATTR_SRAM_ADDR and
|
|
|
|
* IWL_TM_ATTR_SRAM_SIZE to decide the memory area for SRAM data reading
|
|
|
|
*
|
|
|
|
* Several error will be retured, -EBUSY if the SRAM data retrieved by
|
|
|
|
* previous command has not been delivered to userspace, or -ENOMSG if
|
|
|
|
* the mandatory fields (IWL_TM_ATTR_SRAM_ADDR,IWL_TM_ATTR_SRAM_SIZE)
|
|
|
|
* are missing, or -ENOMEM if the buffer allocation fails.
|
|
|
|
*
|
|
|
|
* Otherwise 0 is replied indicating the success of the SRAM reading.
|
|
|
|
*
|
|
|
|
* @hw: ieee80211_hw object that represents the device
|
|
|
|
* @tb: gnl message fields from the user space
|
|
|
|
*/
|
|
|
|
static int iwl_testmode_sram(struct ieee80211_hw *hw, struct nlattr **tb)
|
|
|
|
{
|
|
|
|
struct iwl_priv *priv = hw->priv;
|
2011-11-23 14:57:22 +00:00
|
|
|
u32 base, ofs, size, maxsize;
|
2011-11-23 07:03:39 +00:00
|
|
|
|
|
|
|
if (priv->testmode_sram.sram_readed)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
if (!tb[IWL_TM_ATTR_SRAM_ADDR]) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error finding SRAM offset address\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
}
|
|
|
|
ofs = nla_get_u32(tb[IWL_TM_ATTR_SRAM_ADDR]);
|
|
|
|
if (!tb[IWL_TM_ATTR_SRAM_SIZE]) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error finding size for SRAM reading\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
}
|
|
|
|
size = nla_get_u32(tb[IWL_TM_ATTR_SRAM_SIZE]);
|
2011-11-29 01:05:01 +00:00
|
|
|
switch (priv->shrd->ucode_type) {
|
2011-11-23 14:57:22 +00:00
|
|
|
case IWL_UCODE_REGULAR:
|
|
|
|
maxsize = trans(priv)->ucode_rt.data.len;
|
|
|
|
break;
|
|
|
|
case IWL_UCODE_INIT:
|
|
|
|
maxsize = trans(priv)->ucode_init.data.len;
|
|
|
|
break;
|
|
|
|
case IWL_UCODE_WOWLAN:
|
|
|
|
maxsize = trans(priv)->ucode_wowlan.data.len;
|
|
|
|
break;
|
|
|
|
case IWL_UCODE_NONE:
|
|
|
|
IWL_DEBUG_INFO(priv, "Error, uCode does not been loaded\n");
|
|
|
|
return -ENOSYS;
|
|
|
|
default:
|
|
|
|
IWL_DEBUG_INFO(priv, "Error, unsupported uCode type\n");
|
|
|
|
return -ENOSYS;
|
|
|
|
}
|
|
|
|
if ((ofs + size) > maxsize) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Invalid offset/size: out of range\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2011-11-23 07:03:39 +00:00
|
|
|
priv->testmode_sram.buff_size = (size / 4) * 4;
|
|
|
|
priv->testmode_sram.buff_addr =
|
|
|
|
kmalloc(priv->testmode_sram.buff_size, GFP_KERNEL);
|
|
|
|
if (priv->testmode_sram.buff_addr == NULL) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error allocating memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
base = 0x800000;
|
|
|
|
_iwl_read_targ_mem_words(bus(priv), base + ofs,
|
|
|
|
priv->testmode_sram.buff_addr,
|
|
|
|
priv->testmode_sram.buff_size / 4);
|
|
|
|
priv->testmode_sram.num_chunks =
|
2011-11-23 07:05:02 +00:00
|
|
|
DIV_ROUND_UP(priv->testmode_sram.buff_size, DUMP_CHUNK_SIZE);
|
2011-11-23 07:03:39 +00:00
|
|
|
priv->testmode_sram.sram_readed = true;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int iwl_testmode_sram_dump(struct ieee80211_hw *hw, struct nlattr **tb,
|
|
|
|
struct sk_buff *skb,
|
|
|
|
struct netlink_callback *cb)
|
|
|
|
{
|
|
|
|
struct iwl_priv *priv = hw->priv;
|
|
|
|
int idx, length;
|
|
|
|
|
|
|
|
if (priv->testmode_sram.sram_readed) {
|
|
|
|
idx = cb->args[4];
|
|
|
|
if (idx >= priv->testmode_sram.num_chunks) {
|
|
|
|
iwl_sram_cleanup(priv);
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
2011-11-23 07:05:02 +00:00
|
|
|
length = DUMP_CHUNK_SIZE;
|
2011-11-23 07:03:39 +00:00
|
|
|
if (((idx + 1) == priv->testmode_sram.num_chunks) &&
|
2011-11-23 07:05:02 +00:00
|
|
|
(priv->testmode_sram.buff_size % DUMP_CHUNK_SIZE))
|
2011-11-23 07:03:39 +00:00
|
|
|
length = priv->testmode_sram.buff_size %
|
2011-11-23 07:05:02 +00:00
|
|
|
DUMP_CHUNK_SIZE;
|
2011-11-23 07:03:39 +00:00
|
|
|
|
|
|
|
NLA_PUT(skb, IWL_TM_ATTR_SRAM_DUMP, length,
|
|
|
|
priv->testmode_sram.buff_addr +
|
2011-11-23 07:05:02 +00:00
|
|
|
(DUMP_CHUNK_SIZE * idx));
|
2011-11-23 07:03:39 +00:00
|
|
|
idx++;
|
|
|
|
cb->args[4] = idx;
|
|
|
|
return 0;
|
|
|
|
} else
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
nla_put_failure:
|
|
|
|
return -ENOBUFS;
|
|
|
|
}
|
|
|
|
|
2011-07-08 15:46:26 +00:00
|
|
|
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
/* The testmode gnl message handler that takes the gnl message from the
|
|
|
|
* user space and parses it per the policy iwl_testmode_gnl_msg_policy, then
|
|
|
|
* invoke the corresponding handlers.
|
|
|
|
*
|
|
|
|
* This function is invoked when there is user space application sending
|
|
|
|
* gnl message through the testmode tunnel NL80211_CMD_TESTMODE regulated
|
|
|
|
* by nl80211.
|
|
|
|
*
|
|
|
|
* It retrieves the mandatory field, IWL_TM_ATTR_COMMAND, before
|
|
|
|
* dispatching it to the corresponding handler.
|
|
|
|
*
|
|
|
|
* If IWL_TM_ATTR_COMMAND is missing, -ENOMSG is replied to user application;
|
|
|
|
* -ENOSYS is replied to the user application if the command is unknown;
|
|
|
|
* Otherwise, the command is dispatched to the respective handler.
|
|
|
|
*
|
|
|
|
* @hw: ieee80211_hw object that represents the device
|
|
|
|
* @data: pointer to user space message
|
|
|
|
* @len: length in byte of @data
|
|
|
|
*/
|
2011-10-10 14:27:11 +00:00
|
|
|
int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
{
|
2011-07-11 17:47:39 +00:00
|
|
|
struct nlattr *tb[IWL_TM_ATTR_MAX];
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
struct iwl_priv *priv = hw->priv;
|
|
|
|
int result;
|
|
|
|
|
|
|
|
result = nla_parse(tb, IWL_TM_ATTR_MAX - 1, data, len,
|
|
|
|
iwl_testmode_gnl_msg_policy);
|
|
|
|
if (result != 0) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error parsing the gnl message : %d\n", result);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* IWL_TM_ATTR_COMMAND is absolutely mandatory */
|
|
|
|
if (!tb[IWL_TM_ATTR_COMMAND]) {
|
|
|
|
IWL_DEBUG_INFO(priv, "Error finding testmode command type\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
}
|
|
|
|
/* in case multiple accesses to the device happens */
|
2011-08-26 06:10:44 +00:00
|
|
|
mutex_lock(&priv->shrd->mutex);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
|
|
|
|
switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
|
|
|
|
case IWL_TM_CMD_APP2DEV_UCODE:
|
|
|
|
IWL_DEBUG_INFO(priv, "testmode cmd to uCode\n");
|
|
|
|
result = iwl_testmode_ucode(hw, tb);
|
|
|
|
break;
|
2011-11-16 03:24:32 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32:
|
|
|
|
case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32:
|
|
|
|
case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8:
|
|
|
|
case IWL_TM_CMD_APP2DEV_INDIRECT_REG_READ32:
|
|
|
|
case IWL_TM_CMD_APP2DEV_INDIRECT_REG_WRITE32:
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
IWL_DEBUG_INFO(priv, "testmode cmd to register\n");
|
|
|
|
result = iwl_testmode_reg(hw, tb);
|
|
|
|
break;
|
|
|
|
case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
|
|
|
|
case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
|
|
|
|
case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
|
|
|
|
case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
|
2011-05-04 01:05:12 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_GET_EEPROM:
|
2011-05-04 01:05:13 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_FIXRATE_REQ:
|
2011-11-25 06:26:53 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW:
|
2011-11-28 08:55:38 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_GET_FW_VERSION:
|
2011-12-01 09:12:50 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_GET_DEVICE_ID:
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
IWL_DEBUG_INFO(priv, "testmode cmd to driver\n");
|
|
|
|
result = iwl_testmode_driver(hw, tb);
|
|
|
|
break;
|
2011-05-06 17:21:28 +00:00
|
|
|
|
|
|
|
case IWL_TM_CMD_APP2DEV_BEGIN_TRACE:
|
|
|
|
case IWL_TM_CMD_APP2DEV_END_TRACE:
|
|
|
|
case IWL_TM_CMD_APP2DEV_READ_TRACE:
|
|
|
|
IWL_DEBUG_INFO(priv, "testmode uCode trace cmd to driver\n");
|
|
|
|
result = iwl_testmode_trace(hw, tb);
|
|
|
|
break;
|
|
|
|
|
2011-07-08 15:46:26 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_OWNERSHIP:
|
|
|
|
IWL_DEBUG_INFO(priv, "testmode change uCode ownership\n");
|
|
|
|
result = iwl_testmode_ownership(hw, tb);
|
|
|
|
break;
|
|
|
|
|
2011-11-23 07:03:39 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_READ_SRAM:
|
|
|
|
IWL_DEBUG_INFO(priv, "testmode sram read cmd to driver\n");
|
|
|
|
result = iwl_testmode_sram(hw, tb);
|
|
|
|
break;
|
|
|
|
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
default:
|
|
|
|
IWL_DEBUG_INFO(priv, "Unknown testmode command\n");
|
|
|
|
result = -ENOSYS;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2011-08-26 06:10:44 +00:00
|
|
|
mutex_unlock(&priv->shrd->mutex);
|
iwlwifi: support the svtool messages interactions through nl80211 test mode
This patch adds the feature to support the test mode operation through
the generic netlink channel NL80211_CMD_TESTMODE between intel
wireless device iwlwifi and the user space application svtool.
The main purpose is to create a transportation layer between the iwlwifi
device and the user space application so that the interaction between the
user space application svtool and the iwlwifi device in the kernel space is
in a way of generic netlink messaging.
The detail specific functions are:
1. The function iwl_testmode_cmd() is added to digest the svtool test command
from the user space application. The svtool test commands are categorized to
three types : commands to be processed by the device ucode, commands to access
the registers, and commands to be processed at the driver level(such as reload
the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers
and reply to user space regarding the command execution status. Extra data is
returned to the user space application if there's any.
2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous
messages from the iwlwifi device to the user space. Regardless the message types,
whenever there is a valid spontaneous message received by the iwlwifi ISR,
iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user
space. The message content is not attacked and the message parsing is left to
the user space application.
Implementation guidelines:
1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE
channel, therefore, the codes need to follow the regulations set by cfg80211.ko
to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi
device is indicated with ieee80211_ops and can be actually accessed.
Therefore, a callback iwl_testmode_cmd() is added to the structure
iwlagn_hw_ops in iwl-agn.c.
2. It intends to utilize those low level device access APIs from iwlwifi device driver
(ie. iwlagn.ko) rather than creating it's own set of device access functions.
For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused.
3. The main functions are maintained in new files instead of spreading all over the
existing iwlwifi driver files.
The new files added are :
drivers/net/wireless/iwlwifi/iwl-sv-open.c
- to handle the user space test mode application command
and reply the respective command status to the user space application.
- to multicast the spontaneous messages from device to user space.
drivers/net/wireless/iwlwifi/iwl-testmode.h
- the commonly referenced definitions for the TLVs used in
the generic netlink messages
Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
|
|
|
return result;
|
|
|
|
}
|
2011-05-31 15:03:02 +00:00
|
|
|
|
2011-10-10 14:27:11 +00:00
|
|
|
int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *skb,
|
2011-05-31 15:03:02 +00:00
|
|
|
struct netlink_callback *cb,
|
|
|
|
void *data, int len)
|
|
|
|
{
|
|
|
|
struct nlattr *tb[IWL_TM_ATTR_MAX];
|
|
|
|
struct iwl_priv *priv = hw->priv;
|
|
|
|
int result;
|
|
|
|
u32 cmd;
|
|
|
|
|
|
|
|
if (cb->args[3]) {
|
|
|
|
/* offset by 1 since commands start at 0 */
|
|
|
|
cmd = cb->args[3] - 1;
|
|
|
|
} else {
|
|
|
|
result = nla_parse(tb, IWL_TM_ATTR_MAX - 1, data, len,
|
|
|
|
iwl_testmode_gnl_msg_policy);
|
|
|
|
if (result) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error parsing the gnl message : %d\n", result);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* IWL_TM_ATTR_COMMAND is absolutely mandatory */
|
|
|
|
if (!tb[IWL_TM_ATTR_COMMAND]) {
|
|
|
|
IWL_DEBUG_INFO(priv,
|
|
|
|
"Error finding testmode command type\n");
|
|
|
|
return -ENOMSG;
|
|
|
|
}
|
|
|
|
cmd = nla_get_u32(tb[IWL_TM_ATTR_COMMAND]);
|
|
|
|
cb->args[3] = cmd + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* in case multiple accesses to the device happens */
|
2011-08-26 06:10:44 +00:00
|
|
|
mutex_lock(&priv->shrd->mutex);
|
2011-05-31 15:03:02 +00:00
|
|
|
switch (cmd) {
|
|
|
|
case IWL_TM_CMD_APP2DEV_READ_TRACE:
|
|
|
|
IWL_DEBUG_INFO(priv, "uCode trace cmd to driver\n");
|
|
|
|
result = iwl_testmode_trace_dump(hw, tb, skb, cb);
|
|
|
|
break;
|
2011-11-23 07:03:39 +00:00
|
|
|
case IWL_TM_CMD_APP2DEV_DUMP_SRAM:
|
|
|
|
IWL_DEBUG_INFO(priv, "testmode sram dump cmd to driver\n");
|
|
|
|
result = iwl_testmode_sram_dump(hw, tb, skb, cb);
|
|
|
|
break;
|
2011-05-31 15:03:02 +00:00
|
|
|
default:
|
|
|
|
result = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2011-08-26 06:10:44 +00:00
|
|
|
mutex_unlock(&priv->shrd->mutex);
|
2011-05-31 15:03:02 +00:00
|
|
|
return result;
|
|
|
|
}
|