linux/drivers/media/i2c/imx219.c

1608 lines
39 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* A V4L2 driver for Sony IMX219 cameras.
* Copyright (C) 2019, Raspberry Pi (Trading) Ltd
*
* Based on Sony imx258 camera driver
* Copyright (C) 2018 Intel Corporation
*
* DT / fwnode changes, and regulator / GPIO control taken from imx214 driver
* Copyright 2018 Qtechnology A/S
*
* Flip handling taken from the Sony IMX319 driver.
* Copyright (C) 2018 Intel Corporation
*
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-mediabus.h>
#include <asm/unaligned.h>
#define IMX219_REG_VALUE_08BIT 1
#define IMX219_REG_VALUE_16BIT 2
#define IMX219_REG_MODE_SELECT 0x0100
#define IMX219_MODE_STANDBY 0x00
#define IMX219_MODE_STREAMING 0x01
/* Chip ID */
#define IMX219_REG_CHIP_ID 0x0000
#define IMX219_CHIP_ID 0x0219
/* External clock frequency is 24.0M */
#define IMX219_XCLK_FREQ 24000000
/* Pixel rate is fixed at 182.4M for all the modes */
#define IMX219_PIXEL_RATE 182400000
#define IMX219_DEFAULT_LINK_FREQ 456000000
/* V_TIMING internal */
#define IMX219_REG_VTS 0x0160
#define IMX219_VTS_15FPS 0x0dc6
#define IMX219_VTS_30FPS_1080P 0x06e3
#define IMX219_VTS_30FPS_BINNED 0x06e3
#define IMX219_VTS_30FPS_640x480 0x06e3
#define IMX219_VTS_MAX 0xffff
#define IMX219_VBLANK_MIN 4
/*Frame Length Line*/
#define IMX219_FLL_MIN 0x08a6
#define IMX219_FLL_MAX 0xffff
#define IMX219_FLL_STEP 1
#define IMX219_FLL_DEFAULT 0x0c98
/* HBLANK control - read only */
#define IMX219_PPL_DEFAULT 3448
/* Exposure control */
#define IMX219_REG_EXPOSURE 0x015a
#define IMX219_EXPOSURE_MIN 4
#define IMX219_EXPOSURE_STEP 1
#define IMX219_EXPOSURE_DEFAULT 0x640
#define IMX219_EXPOSURE_MAX 65535
/* Analog gain control */
#define IMX219_REG_ANALOG_GAIN 0x0157
#define IMX219_ANA_GAIN_MIN 0
#define IMX219_ANA_GAIN_MAX 232
#define IMX219_ANA_GAIN_STEP 1
#define IMX219_ANA_GAIN_DEFAULT 0x0
/* Digital gain control */
#define IMX219_REG_DIGITAL_GAIN 0x0158
#define IMX219_DGTL_GAIN_MIN 0x0100
#define IMX219_DGTL_GAIN_MAX 0x0fff
#define IMX219_DGTL_GAIN_DEFAULT 0x0100
#define IMX219_DGTL_GAIN_STEP 1
#define IMX219_REG_ORIENTATION 0x0172
/* Test Pattern Control */
#define IMX219_REG_TEST_PATTERN 0x0600
#define IMX219_TEST_PATTERN_DISABLE 0
#define IMX219_TEST_PATTERN_SOLID_COLOR 1
#define IMX219_TEST_PATTERN_COLOR_BARS 2
#define IMX219_TEST_PATTERN_GREY_COLOR 3
#define IMX219_TEST_PATTERN_PN9 4
/* Test pattern colour components */
#define IMX219_REG_TESTP_RED 0x0602
#define IMX219_REG_TESTP_GREENR 0x0604
#define IMX219_REG_TESTP_BLUE 0x0606
#define IMX219_REG_TESTP_GREENB 0x0608
#define IMX219_TESTP_COLOUR_MIN 0
#define IMX219_TESTP_COLOUR_MAX 0x03ff
#define IMX219_TESTP_COLOUR_STEP 1
#define IMX219_TESTP_RED_DEFAULT IMX219_TESTP_COLOUR_MAX
#define IMX219_TESTP_GREENR_DEFAULT 0
#define IMX219_TESTP_BLUE_DEFAULT 0
#define IMX219_TESTP_GREENB_DEFAULT 0
/* IMX219 native and active pixel array size. */
#define IMX219_NATIVE_WIDTH 3296U
#define IMX219_NATIVE_HEIGHT 2480U
#define IMX219_PIXEL_ARRAY_LEFT 8U
#define IMX219_PIXEL_ARRAY_TOP 8U
#define IMX219_PIXEL_ARRAY_WIDTH 3280U
#define IMX219_PIXEL_ARRAY_HEIGHT 2464U
struct imx219_reg {
u16 address;
u8 val;
};
struct imx219_reg_list {
unsigned int num_of_regs;
const struct imx219_reg *regs;
};
/* Mode : resolution and related config&values */
struct imx219_mode {
/* Frame width */
unsigned int width;
/* Frame height */
unsigned int height;
/* Analog crop rectangle. */
struct v4l2_rect crop;
/* V-timing */
unsigned int vts_def;
/* Default register values */
struct imx219_reg_list reg_list;
};
/*
* Register sets lifted off the i2C interface from the Raspberry Pi firmware
* driver.
* 3280x2464 = mode 2, 1920x1080 = mode 1, 1640x1232 = mode 4, 640x480 = mode 7.
*/
static const struct imx219_reg mode_3280x2464_regs[] = {
{0x0100, 0x00},
{0x30eb, 0x0c},
{0x30eb, 0x05},
{0x300a, 0xff},
{0x300b, 0xff},
{0x30eb, 0x05},
{0x30eb, 0x09},
{0x0114, 0x01},
{0x0128, 0x00},
{0x012a, 0x18},
{0x012b, 0x00},
{0x0164, 0x00},
{0x0165, 0x00},
{0x0166, 0x0c},
{0x0167, 0xcf},
{0x0168, 0x00},
{0x0169, 0x00},
{0x016a, 0x09},
{0x016b, 0x9f},
{0x016c, 0x0c},
{0x016d, 0xd0},
{0x016e, 0x09},
{0x016f, 0xa0},
{0x0170, 0x01},
{0x0171, 0x01},
{0x0174, 0x00},
{0x0175, 0x00},
{0x0301, 0x05},
{0x0303, 0x01},
{0x0304, 0x03},
{0x0305, 0x03},
{0x0306, 0x00},
{0x0307, 0x39},
{0x030b, 0x01},
{0x030c, 0x00},
{0x030d, 0x72},
{0x0624, 0x0c},
{0x0625, 0xd0},
{0x0626, 0x09},
{0x0627, 0xa0},
{0x455e, 0x00},
{0x471e, 0x4b},
{0x4767, 0x0f},
{0x4750, 0x14},
{0x4540, 0x00},
{0x47b4, 0x14},
{0x4713, 0x30},
{0x478b, 0x10},
{0x478f, 0x10},
{0x4793, 0x10},
{0x4797, 0x0e},
{0x479b, 0x0e},
{0x0162, 0x0d},
{0x0163, 0x78},
};
static const struct imx219_reg mode_1920_1080_regs[] = {
{0x0100, 0x00},
{0x30eb, 0x05},
{0x30eb, 0x0c},
{0x300a, 0xff},
{0x300b, 0xff},
{0x30eb, 0x05},
{0x30eb, 0x09},
{0x0114, 0x01},
{0x0128, 0x00},
{0x012a, 0x18},
{0x012b, 0x00},
{0x0162, 0x0d},
{0x0163, 0x78},
{0x0164, 0x02},
{0x0165, 0xa8},
{0x0166, 0x0a},
{0x0167, 0x27},
{0x0168, 0x02},
{0x0169, 0xb4},
{0x016a, 0x06},
{0x016b, 0xeb},
{0x016c, 0x07},
{0x016d, 0x80},
{0x016e, 0x04},
{0x016f, 0x38},
{0x0170, 0x01},
{0x0171, 0x01},
{0x0174, 0x00},
{0x0175, 0x00},
{0x0301, 0x05},
{0x0303, 0x01},
{0x0304, 0x03},
{0x0305, 0x03},
{0x0306, 0x00},
{0x0307, 0x39},
{0x030b, 0x01},
{0x030c, 0x00},
{0x030d, 0x72},
{0x0624, 0x07},
{0x0625, 0x80},
{0x0626, 0x04},
{0x0627, 0x38},
{0x455e, 0x00},
{0x471e, 0x4b},
{0x4767, 0x0f},
{0x4750, 0x14},
{0x4540, 0x00},
{0x47b4, 0x14},
{0x4713, 0x30},
{0x478b, 0x10},
{0x478f, 0x10},
{0x4793, 0x10},
{0x4797, 0x0e},
{0x479b, 0x0e},
};
static const struct imx219_reg mode_1640_1232_regs[] = {
{0x0100, 0x00},
{0x30eb, 0x0c},
{0x30eb, 0x05},
{0x300a, 0xff},
{0x300b, 0xff},
{0x30eb, 0x05},
{0x30eb, 0x09},
{0x0114, 0x01},
{0x0128, 0x00},
{0x012a, 0x18},
{0x012b, 0x00},
{0x0164, 0x00},
{0x0165, 0x00},
{0x0166, 0x0c},
{0x0167, 0xcf},
{0x0168, 0x00},
{0x0169, 0x00},
{0x016a, 0x09},
{0x016b, 0x9f},
{0x016c, 0x06},
{0x016d, 0x68},
{0x016e, 0x04},
{0x016f, 0xd0},
{0x0170, 0x01},
{0x0171, 0x01},
{0x0174, 0x01},
{0x0175, 0x01},
{0x0301, 0x05},
{0x0303, 0x01},
{0x0304, 0x03},
{0x0305, 0x03},
{0x0306, 0x00},
{0x0307, 0x39},
{0x030b, 0x01},
{0x030c, 0x00},
{0x030d, 0x72},
{0x0624, 0x06},
{0x0625, 0x68},
{0x0626, 0x04},
{0x0627, 0xd0},
{0x455e, 0x00},
{0x471e, 0x4b},
{0x4767, 0x0f},
{0x4750, 0x14},
{0x4540, 0x00},
{0x47b4, 0x14},
{0x4713, 0x30},
{0x478b, 0x10},
{0x478f, 0x10},
{0x4793, 0x10},
{0x4797, 0x0e},
{0x479b, 0x0e},
{0x0162, 0x0d},
{0x0163, 0x78},
};
static const struct imx219_reg mode_640_480_regs[] = {
{0x0100, 0x00},
{0x30eb, 0x05},
{0x30eb, 0x0c},
{0x300a, 0xff},
{0x300b, 0xff},
{0x30eb, 0x05},
{0x30eb, 0x09},
{0x0114, 0x01},
{0x0128, 0x00},
{0x012a, 0x18},
{0x012b, 0x00},
{0x0162, 0x0d},
{0x0163, 0x78},
{0x0164, 0x03},
{0x0165, 0xe8},
{0x0166, 0x08},
{0x0167, 0xe7},
{0x0168, 0x02},
{0x0169, 0xf0},
{0x016a, 0x06},
{0x016b, 0xaf},
{0x016c, 0x02},
{0x016d, 0x80},
{0x016e, 0x01},
{0x016f, 0xe0},
{0x0170, 0x01},
{0x0171, 0x01},
{0x0174, 0x03},
{0x0175, 0x03},
{0x0301, 0x05},
{0x0303, 0x01},
{0x0304, 0x03},
{0x0305, 0x03},
{0x0306, 0x00},
{0x0307, 0x39},
{0x030b, 0x01},
{0x030c, 0x00},
{0x030d, 0x72},
{0x0624, 0x06},
{0x0625, 0x68},
{0x0626, 0x04},
{0x0627, 0xd0},
{0x455e, 0x00},
{0x471e, 0x4b},
{0x4767, 0x0f},
{0x4750, 0x14},
{0x4540, 0x00},
{0x47b4, 0x14},
{0x4713, 0x30},
{0x478b, 0x10},
{0x478f, 0x10},
{0x4793, 0x10},
{0x4797, 0x0e},
{0x479b, 0x0e},
};
static const struct imx219_reg raw8_framefmt_regs[] = {
{0x018c, 0x08},
{0x018d, 0x08},
{0x0309, 0x08},
};
static const struct imx219_reg raw10_framefmt_regs[] = {
{0x018c, 0x0a},
{0x018d, 0x0a},
{0x0309, 0x0a},
};
static const s64 imx219_link_freq_menu[] = {
IMX219_DEFAULT_LINK_FREQ,
};
static const char * const imx219_test_pattern_menu[] = {
"Disabled",
"Color Bars",
"Solid Color",
"Grey Color Bars",
"PN9"
};
static const int imx219_test_pattern_val[] = {
IMX219_TEST_PATTERN_DISABLE,
IMX219_TEST_PATTERN_COLOR_BARS,
IMX219_TEST_PATTERN_SOLID_COLOR,
IMX219_TEST_PATTERN_GREY_COLOR,
IMX219_TEST_PATTERN_PN9,
};
/* regulator supplies */
static const char * const imx219_supply_name[] = {
/* Supplies can be enabled in any order */
"VANA", /* Analog (2.8V) supply */
"VDIG", /* Digital Core (1.8V) supply */
"VDDL", /* IF (1.2V) supply */
};
#define IMX219_NUM_SUPPLIES ARRAY_SIZE(imx219_supply_name)
/*
* The supported formats.
* This table MUST contain 4 entries per format, to cover the various flip
* combinations in the order
* - no flip
* - h flip
* - v flip
* - h&v flips
*/
static const u32 codes[] = {
MEDIA_BUS_FMT_SRGGB10_1X10,
MEDIA_BUS_FMT_SGRBG10_1X10,
MEDIA_BUS_FMT_SGBRG10_1X10,
MEDIA_BUS_FMT_SBGGR10_1X10,
MEDIA_BUS_FMT_SRGGB8_1X8,
MEDIA_BUS_FMT_SGRBG8_1X8,
MEDIA_BUS_FMT_SGBRG8_1X8,
MEDIA_BUS_FMT_SBGGR8_1X8,
};
/*
* Initialisation delay between XCLR low->high and the moment when the sensor
* can start capture (i.e. can leave software stanby) must be not less than:
* t4 + max(t5, t6 + <time to initialize the sensor register over I2C>)
* where
* t4 is fixed, and is max 200uS,
* t5 is fixed, and is 6000uS,
* t6 depends on the sensor external clock, and is max 32000 clock periods.
* As per sensor datasheet, the external clock must be from 6MHz to 27MHz.
* So for any acceptable external clock t6 is always within the range of
* 1185 to 5333 uS, and is always less than t5.
* For this reason this is always safe to wait (t4 + t5) = 6200 uS, then
* initialize the sensor over I2C, and then exit the software standby.
*
* This start-up time can be optimized a bit more, if we start the writes
* over I2C after (t4+t6), but before (t4+t5) expires. But then sensor
* initialization over I2C may complete before (t4+t5) expires, and we must
* ensure that capture is not started before (t4+t5).
*
* This delay doesn't account for the power supply startup time. If needed,
* this should be taken care of via the regulator framework. E.g. in the
* case of DT for regulator-fixed one should define the startup-delay-us
* property.
*/
#define IMX219_XCLR_MIN_DELAY_US 6200
#define IMX219_XCLR_DELAY_RANGE_US 1000
/* Mode configs */
static const struct imx219_mode supported_modes[] = {
{
/* 8MPix 15fps mode */
.width = 3280,
.height = 2464,
.crop = {
.left = IMX219_PIXEL_ARRAY_LEFT,
.top = IMX219_PIXEL_ARRAY_TOP,
.width = 3280,
.height = 2464
},
.vts_def = IMX219_VTS_15FPS,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
.regs = mode_3280x2464_regs,
},
},
{
/* 1080P 30fps cropped */
.width = 1920,
.height = 1080,
.crop = {
.left = 688,
.top = 700,
.width = 1920,
.height = 1080
},
.vts_def = IMX219_VTS_30FPS_1080P,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
.regs = mode_1920_1080_regs,
},
},
{
/* 2x2 binned 30fps mode */
.width = 1640,
.height = 1232,
.crop = {
.left = IMX219_PIXEL_ARRAY_LEFT,
.top = IMX219_PIXEL_ARRAY_TOP,
.width = 3280,
.height = 2464
},
.vts_def = IMX219_VTS_30FPS_BINNED,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
.regs = mode_1640_1232_regs,
},
},
{
/* 640x480 30fps mode */
.width = 640,
.height = 480,
.crop = {
.left = 1008,
.top = 760,
.width = 1280,
.height = 960
},
.vts_def = IMX219_VTS_30FPS_640x480,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_640_480_regs),
.regs = mode_640_480_regs,
},
},
};
struct imx219 {
struct v4l2_subdev sd;
struct media_pad pad;
struct v4l2_mbus_framefmt fmt;
struct clk *xclk; /* system clock to IMX219 */
u32 xclk_freq;
struct gpio_desc *reset_gpio;
struct regulator_bulk_data supplies[IMX219_NUM_SUPPLIES];
struct v4l2_ctrl_handler ctrl_handler;
/* V4L2 Controls */
struct v4l2_ctrl *pixel_rate;
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *exposure;
struct v4l2_ctrl *vflip;
struct v4l2_ctrl *hflip;
struct v4l2_ctrl *vblank;
struct v4l2_ctrl *hblank;
/* Current mode */
const struct imx219_mode *mode;
/*
* Mutex for serialized access:
* Protect sensor module set pad format and start/stop streaming safely.
*/
struct mutex mutex;
/* Streaming on/off */
bool streaming;
};
static inline struct imx219 *to_imx219(struct v4l2_subdev *_sd)
{
return container_of(_sd, struct imx219, sd);
}
/* Read registers up to 2 at a time */
static int imx219_read_reg(struct imx219 *imx219, u16 reg, u32 len, u32 *val)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
struct i2c_msg msgs[2];
u8 addr_buf[2] = { reg >> 8, reg & 0xff };
u8 data_buf[4] = { 0, };
int ret;
if (len > 4)
return -EINVAL;
/* Write register address */
msgs[0].addr = client->addr;
msgs[0].flags = 0;
msgs[0].len = ARRAY_SIZE(addr_buf);
msgs[0].buf = addr_buf;
/* Read data from register */
msgs[1].addr = client->addr;
msgs[1].flags = I2C_M_RD;
msgs[1].len = len;
msgs[1].buf = &data_buf[4 - len];
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (ret != ARRAY_SIZE(msgs))
return -EIO;
*val = get_unaligned_be32(data_buf);
return 0;
}
/* Write registers up to 2 at a time */
static int imx219_write_reg(struct imx219 *imx219, u16 reg, u32 len, u32 val)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
u8 buf[6];
if (len > 4)
return -EINVAL;
put_unaligned_be16(reg, buf);
put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
if (i2c_master_send(client, buf, len + 2) != len + 2)
return -EIO;
return 0;
}
/* Write a list of registers */
static int imx219_write_regs(struct imx219 *imx219,
const struct imx219_reg *regs, u32 len)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
unsigned int i;
int ret;
for (i = 0; i < len; i++) {
ret = imx219_write_reg(imx219, regs[i].address, 1, regs[i].val);
if (ret) {
dev_err_ratelimited(&client->dev,
"Failed to write reg 0x%4.4x. error = %d\n",
regs[i].address, ret);
return ret;
}
}
return 0;
}
/* Get bayer order based on flip setting. */
static u32 imx219_get_format_code(struct imx219 *imx219, u32 code)
{
unsigned int i;
lockdep_assert_held(&imx219->mutex);
for (i = 0; i < ARRAY_SIZE(codes); i++)
if (codes[i] == code)
break;
if (i >= ARRAY_SIZE(codes))
i = 0;
i = (i & ~3) | (imx219->vflip->val ? 2 : 0) |
(imx219->hflip->val ? 1 : 0);
return codes[i];
}
static void imx219_set_default_format(struct imx219 *imx219)
{
struct v4l2_mbus_framefmt *fmt;
fmt = &imx219->fmt;
fmt->code = MEDIA_BUS_FMT_SRGGB10_1X10;
fmt->colorspace = V4L2_COLORSPACE_SRGB;
fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
fmt->colorspace,
fmt->ycbcr_enc);
fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
fmt->width = supported_modes[0].width;
fmt->height = supported_modes[0].height;
fmt->field = V4L2_FIELD_NONE;
}
static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
struct imx219 *imx219 = to_imx219(sd);
struct v4l2_mbus_framefmt *try_fmt =
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
v4l2_subdev_get_try_format(sd, fh->state, 0);
struct v4l2_rect *try_crop;
mutex_lock(&imx219->mutex);
/* Initialize try_fmt */
try_fmt->width = supported_modes[0].width;
try_fmt->height = supported_modes[0].height;
try_fmt->code = imx219_get_format_code(imx219,
MEDIA_BUS_FMT_SRGGB10_1X10);
try_fmt->field = V4L2_FIELD_NONE;
/* Initialize try_crop rectangle. */
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
try_crop = v4l2_subdev_get_try_crop(sd, fh->state, 0);
try_crop->top = IMX219_PIXEL_ARRAY_TOP;
try_crop->left = IMX219_PIXEL_ARRAY_LEFT;
try_crop->width = IMX219_PIXEL_ARRAY_WIDTH;
try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
mutex_unlock(&imx219->mutex);
return 0;
}
static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx219 *imx219 =
container_of(ctrl->handler, struct imx219, ctrl_handler);
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
int ret;
if (ctrl->id == V4L2_CID_VBLANK) {
int exposure_max, exposure_def;
/* Update max exposure while meeting expected vblanking */
exposure_max = imx219->mode->height + ctrl->val - 4;
exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
exposure_max : IMX219_EXPOSURE_DEFAULT;
__v4l2_ctrl_modify_range(imx219->exposure,
imx219->exposure->minimum,
exposure_max, imx219->exposure->step,
exposure_def);
}
/*
* Applying V4L2 control value only happens
* when power is up for streaming
*/
if (pm_runtime_get_if_in_use(&client->dev) == 0)
return 0;
switch (ctrl->id) {
case V4L2_CID_ANALOGUE_GAIN:
ret = imx219_write_reg(imx219, IMX219_REG_ANALOG_GAIN,
IMX219_REG_VALUE_08BIT, ctrl->val);
break;
case V4L2_CID_EXPOSURE:
ret = imx219_write_reg(imx219, IMX219_REG_EXPOSURE,
IMX219_REG_VALUE_16BIT, ctrl->val);
break;
case V4L2_CID_DIGITAL_GAIN:
ret = imx219_write_reg(imx219, IMX219_REG_DIGITAL_GAIN,
IMX219_REG_VALUE_16BIT, ctrl->val);
break;
case V4L2_CID_TEST_PATTERN:
ret = imx219_write_reg(imx219, IMX219_REG_TEST_PATTERN,
IMX219_REG_VALUE_16BIT,
imx219_test_pattern_val[ctrl->val]);
break;
case V4L2_CID_HFLIP:
case V4L2_CID_VFLIP:
ret = imx219_write_reg(imx219, IMX219_REG_ORIENTATION, 1,
imx219->hflip->val |
imx219->vflip->val << 1);
break;
case V4L2_CID_VBLANK:
ret = imx219_write_reg(imx219, IMX219_REG_VTS,
IMX219_REG_VALUE_16BIT,
imx219->mode->height + ctrl->val);
break;
case V4L2_CID_TEST_PATTERN_RED:
ret = imx219_write_reg(imx219, IMX219_REG_TESTP_RED,
IMX219_REG_VALUE_16BIT, ctrl->val);
break;
case V4L2_CID_TEST_PATTERN_GREENR:
ret = imx219_write_reg(imx219, IMX219_REG_TESTP_GREENR,
IMX219_REG_VALUE_16BIT, ctrl->val);
break;
case V4L2_CID_TEST_PATTERN_BLUE:
ret = imx219_write_reg(imx219, IMX219_REG_TESTP_BLUE,
IMX219_REG_VALUE_16BIT, ctrl->val);
break;
case V4L2_CID_TEST_PATTERN_GREENB:
ret = imx219_write_reg(imx219, IMX219_REG_TESTP_GREENB,
IMX219_REG_VALUE_16BIT, ctrl->val);
break;
default:
dev_info(&client->dev,
"ctrl(id:0x%x,val:0x%x) is not handled\n",
ctrl->id, ctrl->val);
ret = -EINVAL;
break;
}
pm_runtime_put(&client->dev);
return ret;
}
static const struct v4l2_ctrl_ops imx219_ctrl_ops = {
.s_ctrl = imx219_set_ctrl,
};
static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
struct imx219 *imx219 = to_imx219(sd);
if (code->index >= (ARRAY_SIZE(codes) / 4))
return -EINVAL;
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size These two functions did not take the imx219->mutex lock, but imx219_get_format_code checks that a lock is taken, so it issues a warning: [ 8.738717] WARNING: CPU: 2 PID: 60 at drivers/media/i2c/imx219.c:653 imx219_get_format_code+0xac/0xc0 [ 8.748113] Modules linked in: [ 8.751214] CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G W 5.8.0-rc1-arm64 #148 [ 8.759821] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) [ 8.765806] Workqueue: events deferred_probe_work_func [ 8.771003] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 8.776635] pc : imx219_get_format_code+0xac/0xc0 [ 8.781390] lr : imx219_get_format_code+0xa8/0xc0 [ 8.786143] sp : ffff800012a538f0 [ 8.789495] x29: ffff800012a538f0 x28: ffff800012838e90 [ 8.794867] x27: ffff0000f28c5800 x26: ffff800011161c68 [ 8.800237] x25: ffff0000f2a5a3f8 x24: 0000000000000018 [ 8.805605] x23: ffff0000f284ef18 x22: ffff0000f2a5a080 [ 8.810974] x21: ffff0000f284ff00 x20: ffff0000f2a5a080 [ 8.816343] x19: 000000000000300f x18: 00000000ffffffff [ 8.821712] x17: ffff800011c77268 x16: 00000000000040d7 [ 8.827081] x15: 00000000000040d8 x14: 0000000000000000 [ 8.832451] x13: 00000000000040d4 x12: ffff800011d19300 [ 8.837819] x11: 00000000000208c0 x10: 0000000000000004 [ 8.843188] x9 : 000000003baa2ecd x8 : 000000008b3f9c73 [ 8.848558] x7 : 0000000000000008 x6 : 0000000000000034 [ 8.853929] x5 : 0000000000000000 x4 : 0000000000000001 [ 8.859297] x3 : ffff800010a2a8a8 x2 : ffff0000f84a8000 [ 8.864666] x1 : 0000000000000000 x0 : 0000000000000000 [ 8.870034] Call trace: [ 8.872515] imx219_get_format_code+0xac/0xc0 [ 8.876921] imx219_enum_mbus_code+0x38/0x60 [ 8.881241] call_enum_mbus_code+0x50/0x70 [ 8.885387] tegra_vi_graph_notify_complete+0x290/0x5e8 [ 8.890670] v4l2_async_notifier_try_complete.part.0+0x48/0x68 [ 8.896563] v4l2_async_register_subdev+0x100/0x1c0 [ 8.901497] v4l2_async_register_subdev_sensor_common+0x70/0xf0 [ 8.907477] imx219_probe+0x590/0x728 [ 8.911184] i2c_device_probe+0xe4/0x2b0 [ 8.915151] really_probe+0xd8/0x330 [ 8.918768] driver_probe_device+0x58/0xb8 [ 8.922909] __device_attach_driver+0x84/0xc8 [ 8.927315] bus_for_each_drv+0x78/0xc8 [ 8.931193] __device_attach+0xe4/0x140 [ 8.935072] device_initial_probe+0x14/0x20 [ 8.939301] bus_probe_device+0x9c/0xa8 [ 8.943179] deferred_probe_work_func+0x74/0xb0 [ 8.947759] process_one_work+0x2c4/0x740 [ 8.951813] worker_thread+0x4c/0x430 [ 8.955518] kthread+0x158/0x178 [ 8.958786] ret_from_fork+0x10/0x1c [ 8.962401] irq event stamp: 63536 [ 8.965846] hardirqs last enabled at (63535): [<ffff800010082398>] el1_irq+0xd8/0x180 [ 8.973846] hardirqs last disabled at (63536): [<ffff8000100a6484>] do_debug_exception+0x16c/0x258 [ 8.982895] softirqs last enabled at (63534): [<ffff800010080d4c>] _stext+0x54c/0x594 [ 8.990896] softirqs last disabled at (63525): [<ffff8000100c8350>] irq_exit+0x100/0x138 [ 8.999066] ---[ end trace ebfbcd84b75ef921 ]--- [ 9.004354] ------------[ cut here ]------------ Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-30 08:44:27 +00:00
mutex_lock(&imx219->mutex);
code->code = imx219_get_format_code(imx219, codes[code->index * 4]);
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size These two functions did not take the imx219->mutex lock, but imx219_get_format_code checks that a lock is taken, so it issues a warning: [ 8.738717] WARNING: CPU: 2 PID: 60 at drivers/media/i2c/imx219.c:653 imx219_get_format_code+0xac/0xc0 [ 8.748113] Modules linked in: [ 8.751214] CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G W 5.8.0-rc1-arm64 #148 [ 8.759821] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) [ 8.765806] Workqueue: events deferred_probe_work_func [ 8.771003] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 8.776635] pc : imx219_get_format_code+0xac/0xc0 [ 8.781390] lr : imx219_get_format_code+0xa8/0xc0 [ 8.786143] sp : ffff800012a538f0 [ 8.789495] x29: ffff800012a538f0 x28: ffff800012838e90 [ 8.794867] x27: ffff0000f28c5800 x26: ffff800011161c68 [ 8.800237] x25: ffff0000f2a5a3f8 x24: 0000000000000018 [ 8.805605] x23: ffff0000f284ef18 x22: ffff0000f2a5a080 [ 8.810974] x21: ffff0000f284ff00 x20: ffff0000f2a5a080 [ 8.816343] x19: 000000000000300f x18: 00000000ffffffff [ 8.821712] x17: ffff800011c77268 x16: 00000000000040d7 [ 8.827081] x15: 00000000000040d8 x14: 0000000000000000 [ 8.832451] x13: 00000000000040d4 x12: ffff800011d19300 [ 8.837819] x11: 00000000000208c0 x10: 0000000000000004 [ 8.843188] x9 : 000000003baa2ecd x8 : 000000008b3f9c73 [ 8.848558] x7 : 0000000000000008 x6 : 0000000000000034 [ 8.853929] x5 : 0000000000000000 x4 : 0000000000000001 [ 8.859297] x3 : ffff800010a2a8a8 x2 : ffff0000f84a8000 [ 8.864666] x1 : 0000000000000000 x0 : 0000000000000000 [ 8.870034] Call trace: [ 8.872515] imx219_get_format_code+0xac/0xc0 [ 8.876921] imx219_enum_mbus_code+0x38/0x60 [ 8.881241] call_enum_mbus_code+0x50/0x70 [ 8.885387] tegra_vi_graph_notify_complete+0x290/0x5e8 [ 8.890670] v4l2_async_notifier_try_complete.part.0+0x48/0x68 [ 8.896563] v4l2_async_register_subdev+0x100/0x1c0 [ 8.901497] v4l2_async_register_subdev_sensor_common+0x70/0xf0 [ 8.907477] imx219_probe+0x590/0x728 [ 8.911184] i2c_device_probe+0xe4/0x2b0 [ 8.915151] really_probe+0xd8/0x330 [ 8.918768] driver_probe_device+0x58/0xb8 [ 8.922909] __device_attach_driver+0x84/0xc8 [ 8.927315] bus_for_each_drv+0x78/0xc8 [ 8.931193] __device_attach+0xe4/0x140 [ 8.935072] device_initial_probe+0x14/0x20 [ 8.939301] bus_probe_device+0x9c/0xa8 [ 8.943179] deferred_probe_work_func+0x74/0xb0 [ 8.947759] process_one_work+0x2c4/0x740 [ 8.951813] worker_thread+0x4c/0x430 [ 8.955518] kthread+0x158/0x178 [ 8.958786] ret_from_fork+0x10/0x1c [ 8.962401] irq event stamp: 63536 [ 8.965846] hardirqs last enabled at (63535): [<ffff800010082398>] el1_irq+0xd8/0x180 [ 8.973846] hardirqs last disabled at (63536): [<ffff8000100a6484>] do_debug_exception+0x16c/0x258 [ 8.982895] softirqs last enabled at (63534): [<ffff800010080d4c>] _stext+0x54c/0x594 [ 8.990896] softirqs last disabled at (63525): [<ffff8000100c8350>] irq_exit+0x100/0x138 [ 8.999066] ---[ end trace ebfbcd84b75ef921 ]--- [ 9.004354] ------------[ cut here ]------------ Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-30 08:44:27 +00:00
mutex_unlock(&imx219->mutex);
return 0;
}
static int imx219_enum_frame_size(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fse)
{
struct imx219 *imx219 = to_imx219(sd);
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size These two functions did not take the imx219->mutex lock, but imx219_get_format_code checks that a lock is taken, so it issues a warning: [ 8.738717] WARNING: CPU: 2 PID: 60 at drivers/media/i2c/imx219.c:653 imx219_get_format_code+0xac/0xc0 [ 8.748113] Modules linked in: [ 8.751214] CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G W 5.8.0-rc1-arm64 #148 [ 8.759821] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) [ 8.765806] Workqueue: events deferred_probe_work_func [ 8.771003] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 8.776635] pc : imx219_get_format_code+0xac/0xc0 [ 8.781390] lr : imx219_get_format_code+0xa8/0xc0 [ 8.786143] sp : ffff800012a538f0 [ 8.789495] x29: ffff800012a538f0 x28: ffff800012838e90 [ 8.794867] x27: ffff0000f28c5800 x26: ffff800011161c68 [ 8.800237] x25: ffff0000f2a5a3f8 x24: 0000000000000018 [ 8.805605] x23: ffff0000f284ef18 x22: ffff0000f2a5a080 [ 8.810974] x21: ffff0000f284ff00 x20: ffff0000f2a5a080 [ 8.816343] x19: 000000000000300f x18: 00000000ffffffff [ 8.821712] x17: ffff800011c77268 x16: 00000000000040d7 [ 8.827081] x15: 00000000000040d8 x14: 0000000000000000 [ 8.832451] x13: 00000000000040d4 x12: ffff800011d19300 [ 8.837819] x11: 00000000000208c0 x10: 0000000000000004 [ 8.843188] x9 : 000000003baa2ecd x8 : 000000008b3f9c73 [ 8.848558] x7 : 0000000000000008 x6 : 0000000000000034 [ 8.853929] x5 : 0000000000000000 x4 : 0000000000000001 [ 8.859297] x3 : ffff800010a2a8a8 x2 : ffff0000f84a8000 [ 8.864666] x1 : 0000000000000000 x0 : 0000000000000000 [ 8.870034] Call trace: [ 8.872515] imx219_get_format_code+0xac/0xc0 [ 8.876921] imx219_enum_mbus_code+0x38/0x60 [ 8.881241] call_enum_mbus_code+0x50/0x70 [ 8.885387] tegra_vi_graph_notify_complete+0x290/0x5e8 [ 8.890670] v4l2_async_notifier_try_complete.part.0+0x48/0x68 [ 8.896563] v4l2_async_register_subdev+0x100/0x1c0 [ 8.901497] v4l2_async_register_subdev_sensor_common+0x70/0xf0 [ 8.907477] imx219_probe+0x590/0x728 [ 8.911184] i2c_device_probe+0xe4/0x2b0 [ 8.915151] really_probe+0xd8/0x330 [ 8.918768] driver_probe_device+0x58/0xb8 [ 8.922909] __device_attach_driver+0x84/0xc8 [ 8.927315] bus_for_each_drv+0x78/0xc8 [ 8.931193] __device_attach+0xe4/0x140 [ 8.935072] device_initial_probe+0x14/0x20 [ 8.939301] bus_probe_device+0x9c/0xa8 [ 8.943179] deferred_probe_work_func+0x74/0xb0 [ 8.947759] process_one_work+0x2c4/0x740 [ 8.951813] worker_thread+0x4c/0x430 [ 8.955518] kthread+0x158/0x178 [ 8.958786] ret_from_fork+0x10/0x1c [ 8.962401] irq event stamp: 63536 [ 8.965846] hardirqs last enabled at (63535): [<ffff800010082398>] el1_irq+0xd8/0x180 [ 8.973846] hardirqs last disabled at (63536): [<ffff8000100a6484>] do_debug_exception+0x16c/0x258 [ 8.982895] softirqs last enabled at (63534): [<ffff800010080d4c>] _stext+0x54c/0x594 [ 8.990896] softirqs last disabled at (63525): [<ffff8000100c8350>] irq_exit+0x100/0x138 [ 8.999066] ---[ end trace ebfbcd84b75ef921 ]--- [ 9.004354] ------------[ cut here ]------------ Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-30 08:44:27 +00:00
u32 code;
if (fse->index >= ARRAY_SIZE(supported_modes))
return -EINVAL;
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size These two functions did not take the imx219->mutex lock, but imx219_get_format_code checks that a lock is taken, so it issues a warning: [ 8.738717] WARNING: CPU: 2 PID: 60 at drivers/media/i2c/imx219.c:653 imx219_get_format_code+0xac/0xc0 [ 8.748113] Modules linked in: [ 8.751214] CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G W 5.8.0-rc1-arm64 #148 [ 8.759821] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) [ 8.765806] Workqueue: events deferred_probe_work_func [ 8.771003] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 8.776635] pc : imx219_get_format_code+0xac/0xc0 [ 8.781390] lr : imx219_get_format_code+0xa8/0xc0 [ 8.786143] sp : ffff800012a538f0 [ 8.789495] x29: ffff800012a538f0 x28: ffff800012838e90 [ 8.794867] x27: ffff0000f28c5800 x26: ffff800011161c68 [ 8.800237] x25: ffff0000f2a5a3f8 x24: 0000000000000018 [ 8.805605] x23: ffff0000f284ef18 x22: ffff0000f2a5a080 [ 8.810974] x21: ffff0000f284ff00 x20: ffff0000f2a5a080 [ 8.816343] x19: 000000000000300f x18: 00000000ffffffff [ 8.821712] x17: ffff800011c77268 x16: 00000000000040d7 [ 8.827081] x15: 00000000000040d8 x14: 0000000000000000 [ 8.832451] x13: 00000000000040d4 x12: ffff800011d19300 [ 8.837819] x11: 00000000000208c0 x10: 0000000000000004 [ 8.843188] x9 : 000000003baa2ecd x8 : 000000008b3f9c73 [ 8.848558] x7 : 0000000000000008 x6 : 0000000000000034 [ 8.853929] x5 : 0000000000000000 x4 : 0000000000000001 [ 8.859297] x3 : ffff800010a2a8a8 x2 : ffff0000f84a8000 [ 8.864666] x1 : 0000000000000000 x0 : 0000000000000000 [ 8.870034] Call trace: [ 8.872515] imx219_get_format_code+0xac/0xc0 [ 8.876921] imx219_enum_mbus_code+0x38/0x60 [ 8.881241] call_enum_mbus_code+0x50/0x70 [ 8.885387] tegra_vi_graph_notify_complete+0x290/0x5e8 [ 8.890670] v4l2_async_notifier_try_complete.part.0+0x48/0x68 [ 8.896563] v4l2_async_register_subdev+0x100/0x1c0 [ 8.901497] v4l2_async_register_subdev_sensor_common+0x70/0xf0 [ 8.907477] imx219_probe+0x590/0x728 [ 8.911184] i2c_device_probe+0xe4/0x2b0 [ 8.915151] really_probe+0xd8/0x330 [ 8.918768] driver_probe_device+0x58/0xb8 [ 8.922909] __device_attach_driver+0x84/0xc8 [ 8.927315] bus_for_each_drv+0x78/0xc8 [ 8.931193] __device_attach+0xe4/0x140 [ 8.935072] device_initial_probe+0x14/0x20 [ 8.939301] bus_probe_device+0x9c/0xa8 [ 8.943179] deferred_probe_work_func+0x74/0xb0 [ 8.947759] process_one_work+0x2c4/0x740 [ 8.951813] worker_thread+0x4c/0x430 [ 8.955518] kthread+0x158/0x178 [ 8.958786] ret_from_fork+0x10/0x1c [ 8.962401] irq event stamp: 63536 [ 8.965846] hardirqs last enabled at (63535): [<ffff800010082398>] el1_irq+0xd8/0x180 [ 8.973846] hardirqs last disabled at (63536): [<ffff8000100a6484>] do_debug_exception+0x16c/0x258 [ 8.982895] softirqs last enabled at (63534): [<ffff800010080d4c>] _stext+0x54c/0x594 [ 8.990896] softirqs last disabled at (63525): [<ffff8000100c8350>] irq_exit+0x100/0x138 [ 8.999066] ---[ end trace ebfbcd84b75ef921 ]--- [ 9.004354] ------------[ cut here ]------------ Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-30 08:44:27 +00:00
mutex_lock(&imx219->mutex);
code = imx219_get_format_code(imx219, fse->code);
mutex_unlock(&imx219->mutex);
if (fse->code != code)
return -EINVAL;
fse->min_width = supported_modes[fse->index].width;
fse->max_width = fse->min_width;
fse->min_height = supported_modes[fse->index].height;
fse->max_height = fse->min_height;
return 0;
}
static void imx219_reset_colorspace(struct v4l2_mbus_framefmt *fmt)
{
fmt->colorspace = V4L2_COLORSPACE_SRGB;
fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
fmt->colorspace,
fmt->ycbcr_enc);
fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
}
static void imx219_update_pad_format(struct imx219 *imx219,
const struct imx219_mode *mode,
struct v4l2_subdev_format *fmt)
{
fmt->format.width = mode->width;
fmt->format.height = mode->height;
fmt->format.field = V4L2_FIELD_NONE;
imx219_reset_colorspace(&fmt->format);
}
static int __imx219_get_pad_format(struct imx219 *imx219,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *try_fmt =
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
v4l2_subdev_get_try_format(&imx219->sd, sd_state,
fmt->pad);
/* update the code which could change due to vflip or hflip: */
try_fmt->code = imx219_get_format_code(imx219, try_fmt->code);
fmt->format = *try_fmt;
} else {
imx219_update_pad_format(imx219, imx219->mode, fmt);
fmt->format.code = imx219_get_format_code(imx219,
imx219->fmt.code);
}
return 0;
}
static int imx219_get_pad_format(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx219 *imx219 = to_imx219(sd);
int ret;
mutex_lock(&imx219->mutex);
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
ret = __imx219_get_pad_format(imx219, sd_state, fmt);
mutex_unlock(&imx219->mutex);
return ret;
}
static int imx219_set_pad_format(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx219 *imx219 = to_imx219(sd);
const struct imx219_mode *mode;
struct v4l2_mbus_framefmt *framefmt;
int exposure_max, exposure_def, hblank;
unsigned int i;
mutex_lock(&imx219->mutex);
for (i = 0; i < ARRAY_SIZE(codes); i++)
if (codes[i] == fmt->format.code)
break;
if (i >= ARRAY_SIZE(codes))
i = 0;
/* Bayer order varies with flips */
fmt->format.code = imx219_get_format_code(imx219, codes[i]);
mode = v4l2_find_nearest_size(supported_modes,
ARRAY_SIZE(supported_modes),
width, height,
fmt->format.width, fmt->format.height);
imx219_update_pad_format(imx219, mode, fmt);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
*framefmt = fmt->format;
} else if (imx219->mode != mode ||
imx219->fmt.code != fmt->format.code) {
imx219->fmt = fmt->format;
imx219->mode = mode;
/* Update limits and set FPS to default */
__v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN,
IMX219_VTS_MAX - mode->height, 1,
mode->vts_def - mode->height);
__v4l2_ctrl_s_ctrl(imx219->vblank,
mode->vts_def - mode->height);
/* Update max exposure while meeting expected vblanking */
exposure_max = mode->vts_def - 4;
exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
exposure_max : IMX219_EXPOSURE_DEFAULT;
__v4l2_ctrl_modify_range(imx219->exposure,
imx219->exposure->minimum,
exposure_max, imx219->exposure->step,
exposure_def);
/*
* Currently PPL is fixed to IMX219_PPL_DEFAULT, so hblank
* depends on mode->width only, and is not changeble in any
* way other than changing the mode.
*/
hblank = IMX219_PPL_DEFAULT - mode->width;
__v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1,
hblank);
}
mutex_unlock(&imx219->mutex);
return 0;
}
static int imx219_set_framefmt(struct imx219 *imx219)
{
switch (imx219->fmt.code) {
case MEDIA_BUS_FMT_SRGGB8_1X8:
case MEDIA_BUS_FMT_SGRBG8_1X8:
case MEDIA_BUS_FMT_SGBRG8_1X8:
case MEDIA_BUS_FMT_SBGGR8_1X8:
return imx219_write_regs(imx219, raw8_framefmt_regs,
ARRAY_SIZE(raw8_framefmt_regs));
case MEDIA_BUS_FMT_SRGGB10_1X10:
case MEDIA_BUS_FMT_SGRBG10_1X10:
case MEDIA_BUS_FMT_SGBRG10_1X10:
case MEDIA_BUS_FMT_SBGGR10_1X10:
return imx219_write_regs(imx219, raw10_framefmt_regs,
ARRAY_SIZE(raw10_framefmt_regs));
}
return -EINVAL;
}
static const struct v4l2_rect *
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
__imx219_get_pad_crop(struct imx219 *imx219,
struct v4l2_subdev_state *sd_state,
unsigned int pad, enum v4l2_subdev_format_whence which)
{
switch (which) {
case V4L2_SUBDEV_FORMAT_TRY:
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
return v4l2_subdev_get_try_crop(&imx219->sd, sd_state, pad);
case V4L2_SUBDEV_FORMAT_ACTIVE:
return &imx219->mode->crop;
}
return NULL;
}
static int imx219_get_selection(struct v4l2_subdev *sd,
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_selection *sel)
{
switch (sel->target) {
case V4L2_SEL_TGT_CROP: {
struct imx219 *imx219 = to_imx219(sd);
mutex_lock(&imx219->mutex);
media: v4l2-subdev: add subdev-wide state struct We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
sel->r = *__imx219_get_pad_crop(imx219, sd_state, sel->pad,
sel->which);
mutex_unlock(&imx219->mutex);
return 0;
}
case V4L2_SEL_TGT_NATIVE_SIZE:
sel->r.top = 0;
sel->r.left = 0;
sel->r.width = IMX219_NATIVE_WIDTH;
sel->r.height = IMX219_NATIVE_HEIGHT;
return 0;
case V4L2_SEL_TGT_CROP_DEFAULT:
case V4L2_SEL_TGT_CROP_BOUNDS:
sel->r.top = IMX219_PIXEL_ARRAY_TOP;
sel->r.left = IMX219_PIXEL_ARRAY_LEFT;
sel->r.width = IMX219_PIXEL_ARRAY_WIDTH;
sel->r.height = IMX219_PIXEL_ARRAY_HEIGHT;
return 0;
}
return -EINVAL;
}
static int imx219_start_streaming(struct imx219 *imx219)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
const struct imx219_reg_list *reg_list;
int ret;
ret = pm_runtime_resume_and_get(&client->dev);
if (ret < 0)
return ret;
/* Apply default values of current mode */
reg_list = &imx219->mode->reg_list;
ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs);
if (ret) {
dev_err(&client->dev, "%s failed to set mode\n", __func__);
goto err_rpm_put;
}
ret = imx219_set_framefmt(imx219);
if (ret) {
dev_err(&client->dev, "%s failed to set frame format: %d\n",
__func__, ret);
goto err_rpm_put;
}
/* Apply customized values from user */
ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler);
if (ret)
goto err_rpm_put;
/* set stream on register */
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
if (ret)
goto err_rpm_put;
/* vflip and hflip cannot change during streaming */
__v4l2_ctrl_grab(imx219->vflip, true);
__v4l2_ctrl_grab(imx219->hflip, true);
return 0;
err_rpm_put:
pm_runtime_put(&client->dev);
return ret;
}
static void imx219_stop_streaming(struct imx219 *imx219)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
int ret;
/* set stream off register */
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY);
if (ret)
dev_err(&client->dev, "%s failed to set stream\n", __func__);
__v4l2_ctrl_grab(imx219->vflip, false);
__v4l2_ctrl_grab(imx219->hflip, false);
pm_runtime_put(&client->dev);
}
static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
{
struct imx219 *imx219 = to_imx219(sd);
int ret = 0;
mutex_lock(&imx219->mutex);
if (imx219->streaming == enable) {
mutex_unlock(&imx219->mutex);
return 0;
}
if (enable) {
/*
* Apply default & customized values
* and then start streaming.
*/
ret = imx219_start_streaming(imx219);
if (ret)
goto err_unlock;
} else {
imx219_stop_streaming(imx219);
}
imx219->streaming = enable;
mutex_unlock(&imx219->mutex);
return ret;
err_unlock:
mutex_unlock(&imx219->mutex);
return ret;
}
/* Power/clock management functions */
static int imx219_power_on(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx219 *imx219 = to_imx219(sd);
int ret;
ret = regulator_bulk_enable(IMX219_NUM_SUPPLIES,
imx219->supplies);
if (ret) {
dev_err(dev, "%s: failed to enable regulators\n",
__func__);
return ret;
}
ret = clk_prepare_enable(imx219->xclk);
if (ret) {
dev_err(dev, "%s: failed to enable clock\n",
__func__);
goto reg_off;
}
gpiod_set_value_cansleep(imx219->reset_gpio, 1);
usleep_range(IMX219_XCLR_MIN_DELAY_US,
IMX219_XCLR_MIN_DELAY_US + IMX219_XCLR_DELAY_RANGE_US);
return 0;
reg_off:
regulator_bulk_disable(IMX219_NUM_SUPPLIES, imx219->supplies);
return ret;
}
static int imx219_power_off(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx219 *imx219 = to_imx219(sd);
gpiod_set_value_cansleep(imx219->reset_gpio, 0);
regulator_bulk_disable(IMX219_NUM_SUPPLIES, imx219->supplies);
clk_disable_unprepare(imx219->xclk);
return 0;
}
static int __maybe_unused imx219_suspend(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx219 *imx219 = to_imx219(sd);
if (imx219->streaming)
imx219_stop_streaming(imx219);
return 0;
}
static int __maybe_unused imx219_resume(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx219 *imx219 = to_imx219(sd);
int ret;
if (imx219->streaming) {
ret = imx219_start_streaming(imx219);
if (ret)
goto error;
}
return 0;
error:
imx219_stop_streaming(imx219);
imx219->streaming = false;
return ret;
}
static int imx219_get_regulators(struct imx219 *imx219)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
unsigned int i;
for (i = 0; i < IMX219_NUM_SUPPLIES; i++)
imx219->supplies[i].supply = imx219_supply_name[i];
return devm_regulator_bulk_get(&client->dev,
IMX219_NUM_SUPPLIES,
imx219->supplies);
}
/* Verify chip ID */
static int imx219_identify_module(struct imx219 *imx219)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
int ret;
u32 val;
ret = imx219_read_reg(imx219, IMX219_REG_CHIP_ID,
IMX219_REG_VALUE_16BIT, &val);
if (ret) {
dev_err(&client->dev, "failed to read chip id %x\n",
IMX219_CHIP_ID);
return ret;
}
if (val != IMX219_CHIP_ID) {
dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
IMX219_CHIP_ID, val);
return -EIO;
}
return 0;
}
static const struct v4l2_subdev_core_ops imx219_core_ops = {
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
};
static const struct v4l2_subdev_video_ops imx219_video_ops = {
.s_stream = imx219_set_stream,
};
static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
.enum_mbus_code = imx219_enum_mbus_code,
.get_fmt = imx219_get_pad_format,
.set_fmt = imx219_set_pad_format,
.get_selection = imx219_get_selection,
.enum_frame_size = imx219_enum_frame_size,
};
static const struct v4l2_subdev_ops imx219_subdev_ops = {
.core = &imx219_core_ops,
.video = &imx219_video_ops,
.pad = &imx219_pad_ops,
};
static const struct v4l2_subdev_internal_ops imx219_internal_ops = {
.open = imx219_open,
};
/* Initialize control handlers */
static int imx219_init_controls(struct imx219 *imx219)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
struct v4l2_ctrl_handler *ctrl_hdlr;
unsigned int height = imx219->mode->height;
struct v4l2_fwnode_device_properties props;
int exposure_max, exposure_def, hblank;
int i, ret;
ctrl_hdlr = &imx219->ctrl_handler;
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 12);
if (ret)
return ret;
mutex_init(&imx219->mutex);
ctrl_hdlr->lock = &imx219->mutex;
/* By default, PIXEL_RATE is read only */
imx219->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_PIXEL_RATE,
IMX219_PIXEL_RATE,
IMX219_PIXEL_RATE, 1,
IMX219_PIXEL_RATE);
imx219->link_freq =
v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_LINK_FREQ,
ARRAY_SIZE(imx219_link_freq_menu) - 1, 0,
imx219_link_freq_menu);
if (imx219->link_freq)
imx219->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
/* Initial vblank/hblank/exposure parameters based on current mode */
imx219->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_VBLANK, IMX219_VBLANK_MIN,
IMX219_VTS_MAX - height, 1,
imx219->mode->vts_def - height);
hblank = IMX219_PPL_DEFAULT - imx219->mode->width;
imx219->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_HBLANK, hblank, hblank,
1, hblank);
if (imx219->hblank)
imx219->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
exposure_max = imx219->mode->vts_def - 4;
exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
exposure_max : IMX219_EXPOSURE_DEFAULT;
imx219->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_EXPOSURE,
IMX219_EXPOSURE_MIN, exposure_max,
IMX219_EXPOSURE_STEP,
exposure_def);
v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
IMX219_ANA_GAIN_MIN, IMX219_ANA_GAIN_MAX,
IMX219_ANA_GAIN_STEP, IMX219_ANA_GAIN_DEFAULT);
v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
IMX219_DGTL_GAIN_MIN, IMX219_DGTL_GAIN_MAX,
IMX219_DGTL_GAIN_STEP, IMX219_DGTL_GAIN_DEFAULT);
imx219->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_HFLIP, 0, 1, 1, 0);
if (imx219->hflip)
imx219->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
imx219->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
if (imx219->vflip)
imx219->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(imx219_test_pattern_menu) - 1,
0, 0, imx219_test_pattern_menu);
for (i = 0; i < 4; i++) {
/*
* The assumption is that
* V4L2_CID_TEST_PATTERN_GREENR == V4L2_CID_TEST_PATTERN_RED + 1
* V4L2_CID_TEST_PATTERN_BLUE == V4L2_CID_TEST_PATTERN_RED + 2
* V4L2_CID_TEST_PATTERN_GREENB == V4L2_CID_TEST_PATTERN_RED + 3
*/
v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
V4L2_CID_TEST_PATTERN_RED + i,
IMX219_TESTP_COLOUR_MIN,
IMX219_TESTP_COLOUR_MAX,
IMX219_TESTP_COLOUR_STEP,
IMX219_TESTP_COLOUR_MAX);
/* The "Solid color" pattern is white by default */
}
if (ctrl_hdlr->error) {
ret = ctrl_hdlr->error;
dev_err(&client->dev, "%s control init failed (%d)\n",
__func__, ret);
goto error;
}
ret = v4l2_fwnode_device_parse(&client->dev, &props);
if (ret)
goto error;
ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx219_ctrl_ops,
&props);
if (ret)
goto error;
imx219->sd.ctrl_handler = ctrl_hdlr;
return 0;
error:
v4l2_ctrl_handler_free(ctrl_hdlr);
mutex_destroy(&imx219->mutex);
return ret;
}
static void imx219_free_controls(struct imx219 *imx219)
{
v4l2_ctrl_handler_free(imx219->sd.ctrl_handler);
mutex_destroy(&imx219->mutex);
}
static int imx219_check_hwcfg(struct device *dev)
{
struct fwnode_handle *endpoint;
struct v4l2_fwnode_endpoint ep_cfg = {
.bus_type = V4L2_MBUS_CSI2_DPHY
};
int ret = -EINVAL;
endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
if (!endpoint) {
dev_err(dev, "endpoint node not found\n");
return -EINVAL;
}
if (v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep_cfg)) {
dev_err(dev, "could not parse endpoint\n");
goto error_out;
}
/* Check the number of MIPI CSI2 data lanes */
if (ep_cfg.bus.mipi_csi2.num_data_lanes != 2) {
dev_err(dev, "only 2 data lanes are currently supported\n");
goto error_out;
}
/* Check the link frequency set in device tree */
if (!ep_cfg.nr_of_link_frequencies) {
dev_err(dev, "link-frequency property not found in DT\n");
goto error_out;
}
if (ep_cfg.nr_of_link_frequencies != 1 ||
ep_cfg.link_frequencies[0] != IMX219_DEFAULT_LINK_FREQ) {
dev_err(dev, "Link frequency not supported: %lld\n",
ep_cfg.link_frequencies[0]);
goto error_out;
}
ret = 0;
error_out:
v4l2_fwnode_endpoint_free(&ep_cfg);
fwnode_handle_put(endpoint);
return ret;
}
static int imx219_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct imx219 *imx219;
int ret;
imx219 = devm_kzalloc(&client->dev, sizeof(*imx219), GFP_KERNEL);
if (!imx219)
return -ENOMEM;
v4l2_i2c_subdev_init(&imx219->sd, client, &imx219_subdev_ops);
/* Check the hardware configuration in device tree */
if (imx219_check_hwcfg(dev))
return -EINVAL;
/* Get system clock (xclk) */
imx219->xclk = devm_clk_get(dev, NULL);
if (IS_ERR(imx219->xclk)) {
dev_err(dev, "failed to get xclk\n");
return PTR_ERR(imx219->xclk);
}
imx219->xclk_freq = clk_get_rate(imx219->xclk);
if (imx219->xclk_freq != IMX219_XCLK_FREQ) {
dev_err(dev, "xclk frequency not supported: %d Hz\n",
imx219->xclk_freq);
return -EINVAL;
}
ret = imx219_get_regulators(imx219);
if (ret) {
dev_err(dev, "failed to get regulators\n");
return ret;
}
/* Request optional enable pin */
imx219->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_HIGH);
/*
* The sensor must be powered for imx219_identify_module()
* to be able to read the CHIP_ID register
*/
ret = imx219_power_on(dev);
if (ret)
return ret;
ret = imx219_identify_module(imx219);
if (ret)
goto error_power_off;
/* Set default mode to max resolution */
imx219->mode = &supported_modes[0];
/* sensor doesn't enter LP-11 state upon power up until and unless
* streaming is started, so upon power up switch the modes to:
* streaming -> standby
*/
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
if (ret < 0)
goto error_power_off;
usleep_range(100, 110);
/* put sensor back to standby mode */
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY);
if (ret < 0)
goto error_power_off;
usleep_range(100, 110);
ret = imx219_init_controls(imx219);
if (ret)
goto error_power_off;
/* Initialize subdev */
imx219->sd.internal_ops = &imx219_internal_ops;
imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
V4L2_SUBDEV_FL_HAS_EVENTS;
imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
/* Initialize source pad */
imx219->pad.flags = MEDIA_PAD_FL_SOURCE;
/* Initialize default format */
imx219_set_default_format(imx219);
ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad);
if (ret) {
dev_err(dev, "failed to init entity pads: %d\n", ret);
goto error_handler_free;
}
ret = v4l2_async_register_subdev_sensor(&imx219->sd);
if (ret < 0) {
dev_err(dev, "failed to register sensor sub-device: %d\n", ret);
goto error_media_entity;
}
/* Enable runtime PM and turn off the device */
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_runtime_idle(dev);
return 0;
error_media_entity:
media_entity_cleanup(&imx219->sd.entity);
error_handler_free:
imx219_free_controls(imx219);
error_power_off:
imx219_power_off(dev);
return ret;
}
static int imx219_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct imx219 *imx219 = to_imx219(sd);
v4l2_async_unregister_subdev(sd);
media_entity_cleanup(&sd->entity);
imx219_free_controls(imx219);
pm_runtime_disable(&client->dev);
if (!pm_runtime_status_suspended(&client->dev))
imx219_power_off(&client->dev);
pm_runtime_set_suspended(&client->dev);
return 0;
}
static const struct of_device_id imx219_dt_ids[] = {
{ .compatible = "sony,imx219" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx219_dt_ids);
static const struct dev_pm_ops imx219_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(imx219_suspend, imx219_resume)
SET_RUNTIME_PM_OPS(imx219_power_off, imx219_power_on, NULL)
};
static struct i2c_driver imx219_i2c_driver = {
.driver = {
.name = "imx219",
.of_match_table = imx219_dt_ids,
.pm = &imx219_pm_ops,
},
.probe_new = imx219_probe,
.remove = imx219_remove,
};
module_i2c_driver(imx219_i2c_driver);
MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.com");
MODULE_DESCRIPTION("Sony IMX219 sensor driver");
MODULE_LICENSE("GPL v2");