linux/fs/btrfs/ctree.c

5099 lines
134 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2007,2008 Oracle. All rights reserved.
*/
#include <linux/sched.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/rbtree.h>
#include <linux/mm.h>
#include <linux/error-injection.h>
#include "messages.h"
#include "ctree.h"
#include "disk-io.h"
#include "transaction.h"
#include "print-tree.h"
#include "locking.h"
#include "volumes.h"
btrfs: qgroup: Use delayed subtree rescan for balance Before this patch, qgroup code traces the whole subtree of subvolume and reloc trees unconditionally. This makes qgroup numbers consistent, but it could cause tons of unnecessary extent tracing, which causes a lot of overhead. However for subtree swap of balance, just swap both subtrees because they contain the same contents and tree structure, so qgroup numbers won't change. It's the race window between subtree swap and transaction commit could cause qgroup number change. This patch will delay the qgroup subtree scan until COW happens for the subtree root. So if there is no other operations for the fs, balance won't cause extra qgroup overhead. (best case scenario) Depending on the workload, most of the subtree scan can still be avoided. Only for worst case scenario, it will fall back to old subtree swap overhead. (scan all swapped subtrees) [[Benchmark]] Hardware: VM 4G vRAM, 8 vCPUs, disk is using 'unsafe' cache mode, backing device is SAMSUNG 850 evo SSD. Host has 16G ram. Mkfs parameter: --nodesize 4K (To bump up tree size) Initial subvolume contents: 4G data copied from /usr and /lib. (With enough regular small files) Snapshots: 16 snapshots of the original subvolume. each snapshot has 3 random files modified. balance parameter: -m So the content should be pretty similar to a real world root fs layout. And after file system population, there is no other activity, so it should be the best case scenario. | v4.20-rc1 | w/ patchset | diff ----------------------------------------------------------------------- relocated extents | 22615 | 22457 | -0.1% qgroup dirty extents | 163457 | 121606 | -25.6% time (sys) | 22.884s | 18.842s | -17.6% time (real) | 27.724s | 22.884s | -17.5% Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 07:15:17 +00:00
#include "qgroup.h"
#include "tree-mod-log.h"
btrfs: tree-checker: check extent buffer owner against owner rootid Btrfs doesn't check whether the tree block respects the root owner. This means, if a tree block referred by a parent in extent tree, but has owner of 5, btrfs can still continue reading the tree block, as long as it doesn't trigger other sanity checks. Normally this is fine, but combined with the empty tree check in check_leaf(), if we hit an empty extent tree, but the root node has csum tree owner, we can let such extent buffer to sneak in. Shrink the hole by: - Do extra eb owner check at tree read time - Make sure the root owner extent buffer exactly matches the root id. Unfortunately we can't yet completely patch the hole, there are several call sites can't pass all info we need: - For reloc/log trees Their owner is key::offset, not key::objectid. We need the full root key to do that accurate check. For now, we just skip the ownership check for those trees. - For add_data_references() of relocation That call site doesn't have any parent/ownership info, as all the bytenrs are all from btrfs_find_all_leafs(). - For direct backref items walk Direct backref items records the parent bytenr directly, thus unlike indirect backref item, we don't do a full tree search. Thus in that case, we don't have full parent owner to check. For the later two cases, they all pass 0 as @owner_root, thus we can skip those cases if @owner_root is 0. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-16 00:05:58 +00:00
#include "tree-checker.h"
#include "fs.h"
#include "accessors.h"
#include "extent-tree.h"
#include "relocation.h"
#include "file-item.h"
static struct kmem_cache *btrfs_path_cachep;
static int split_node(struct btrfs_trans_handle *trans, struct btrfs_root
*root, struct btrfs_path *path, int level);
static int split_leaf(struct btrfs_trans_handle *trans, struct btrfs_root *root,
const struct btrfs_key *ins_key, struct btrfs_path *path,
int data_size, int extend);
static int push_node_left(struct btrfs_trans_handle *trans,
struct extent_buffer *dst,
struct extent_buffer *src, int empty);
static int balance_node_right(struct btrfs_trans_handle *trans,
struct extent_buffer *dst_buf,
struct extent_buffer *src_buf);
static const struct btrfs_csums {
u16 size;
const char name[10];
const char driver[12];
} btrfs_csums[] = {
[BTRFS_CSUM_TYPE_CRC32] = { .size = 4, .name = "crc32c" },
[BTRFS_CSUM_TYPE_XXHASH] = { .size = 8, .name = "xxhash64" },
[BTRFS_CSUM_TYPE_SHA256] = { .size = 32, .name = "sha256" },
[BTRFS_CSUM_TYPE_BLAKE2] = { .size = 32, .name = "blake2b",
.driver = "blake2b-256" },
};
/*
* The leaf data grows from end-to-front in the node. this returns the address
* of the start of the last item, which is the stop of the leaf data stack.
*/
static unsigned int leaf_data_end(const struct extent_buffer *leaf)
{
u32 nr = btrfs_header_nritems(leaf);
if (nr == 0)
return BTRFS_LEAF_DATA_SIZE(leaf->fs_info);
return btrfs_item_offset(leaf, nr - 1);
}
/*
* Move data in a @leaf (using memmove, safe for overlapping ranges).
*
* @leaf: leaf that we're doing a memmove on
* @dst_offset: item data offset we're moving to
* @src_offset: item data offset were' moving from
* @len: length of the data we're moving
*
* Wrapper around memmove_extent_buffer() that takes into account the header on
* the leaf. The btrfs_item offset's start directly after the header, so we
* have to adjust any offsets to account for the header in the leaf. This
* handles that math to simplify the callers.
*/
static inline void memmove_leaf_data(const struct extent_buffer *leaf,
unsigned long dst_offset,
unsigned long src_offset,
unsigned long len)
{
memmove_extent_buffer(leaf, btrfs_item_nr_offset(leaf, 0) + dst_offset,
btrfs_item_nr_offset(leaf, 0) + src_offset, len);
}
/*
* Copy item data from @src into @dst at the given @offset.
*
* @dst: destination leaf that we're copying into
* @src: source leaf that we're copying from
* @dst_offset: item data offset we're copying to
* @src_offset: item data offset were' copying from
* @len: length of the data we're copying
*
* Wrapper around copy_extent_buffer() that takes into account the header on
* the leaf. The btrfs_item offset's start directly after the header, so we
* have to adjust any offsets to account for the header in the leaf. This
* handles that math to simplify the callers.
*/
static inline void copy_leaf_data(const struct extent_buffer *dst,
const struct extent_buffer *src,
unsigned long dst_offset,
unsigned long src_offset, unsigned long len)
{
copy_extent_buffer(dst, src, btrfs_item_nr_offset(dst, 0) + dst_offset,
btrfs_item_nr_offset(src, 0) + src_offset, len);
}
/*
* Move items in a @leaf (using memmove).
*
* @dst: destination leaf for the items
* @dst_item: the item nr we're copying into
* @src_item: the item nr we're copying from
* @nr_items: the number of items to copy
*
* Wrapper around memmove_extent_buffer() that does the math to get the
* appropriate offsets into the leaf from the item numbers.
*/
static inline void memmove_leaf_items(const struct extent_buffer *leaf,
int dst_item, int src_item, int nr_items)
{
memmove_extent_buffer(leaf, btrfs_item_nr_offset(leaf, dst_item),
btrfs_item_nr_offset(leaf, src_item),
nr_items * sizeof(struct btrfs_item));
}
/*
* Copy items from @src into @dst at the given @offset.
*
* @dst: destination leaf for the items
* @src: source leaf for the items
* @dst_item: the item nr we're copying into
* @src_item: the item nr we're copying from
* @nr_items: the number of items to copy
*
* Wrapper around copy_extent_buffer() that does the math to get the
* appropriate offsets into the leaf from the item numbers.
*/
static inline void copy_leaf_items(const struct extent_buffer *dst,
const struct extent_buffer *src,
int dst_item, int src_item, int nr_items)
{
copy_extent_buffer(dst, src, btrfs_item_nr_offset(dst, dst_item),
btrfs_item_nr_offset(src, src_item),
nr_items * sizeof(struct btrfs_item));
}
/* This exists for btrfs-progs usages. */
u16 btrfs_csum_type_size(u16 type)
{
return btrfs_csums[type].size;
}
int btrfs_super_csum_size(const struct btrfs_super_block *s)
{
u16 t = btrfs_super_csum_type(s);
/*
* csum type is validated at mount time
*/
return btrfs_csum_type_size(t);
}
const char *btrfs_super_csum_name(u16 csum_type)
{
/* csum type is validated at mount time */
return btrfs_csums[csum_type].name;
}
/*
* Return driver name if defined, otherwise the name that's also a valid driver
* name
*/
const char *btrfs_super_csum_driver(u16 csum_type)
{
/* csum type is validated at mount time */
return btrfs_csums[csum_type].driver[0] ?
btrfs_csums[csum_type].driver :
btrfs_csums[csum_type].name;
}
size_t __attribute_const__ btrfs_get_num_csums(void)
{
return ARRAY_SIZE(btrfs_csums);
}
struct btrfs_path *btrfs_alloc_path(void)
{
might_sleep();
return kmem_cache_zalloc(btrfs_path_cachep, GFP_NOFS);
}
/* this also releases the path */
void btrfs_free_path(struct btrfs_path *p)
{
if (!p)
return;
btrfs_release_path(p);
kmem_cache_free(btrfs_path_cachep, p);
}
/*
* path release drops references on the extent buffers in the path
* and it drops any locks held by this path
*
* It is safe to call this on paths that no locks or extent buffers held.
*/
noinline void btrfs_release_path(struct btrfs_path *p)
{
int i;
for (i = 0; i < BTRFS_MAX_LEVEL; i++) {
p->slots[i] = 0;
if (!p->nodes[i])
continue;
if (p->locks[i]) {
btrfs_tree_unlock_rw(p->nodes[i], p->locks[i]);
p->locks[i] = 0;
}
free_extent_buffer(p->nodes[i]);
p->nodes[i] = NULL;
}
}
/*
* We want the transaction abort to print stack trace only for errors where the
* cause could be a bug, eg. due to ENOSPC, and not for common errors that are
* caused by external factors.
*/
bool __cold abort_should_print_stack(int error)
{
switch (error) {
case -EIO:
case -EROFS:
case -ENOMEM:
return false;
}
return true;
}
/*
* safely gets a reference on the root node of a tree. A lock
* is not taken, so a concurrent writer may put a different node
* at the root of the tree. See btrfs_lock_root_node for the
* looping required.
*
* The extent buffer returned by this has a reference taken, so
* it won't disappear. It may stop being the root of the tree
* at any time because there are no locks held.
*/
struct extent_buffer *btrfs_root_node(struct btrfs_root *root)
{
struct extent_buffer *eb;
while (1) {
rcu_read_lock();
eb = rcu_dereference(root->node);
/*
* RCU really hurts here, we could free up the root node because
* it was COWed but we may not get the new root node yet so do
* the inc_not_zero dance and if it doesn't work then
* synchronize_rcu and try again.
*/
if (atomic_inc_not_zero(&eb->refs)) {
rcu_read_unlock();
break;
}
rcu_read_unlock();
synchronize_rcu();
}
return eb;
}
/*
* Cowonly root (not-shareable trees, everything not subvolume or reloc roots),
* just get put onto a simple dirty list. Transaction walks this list to make
* sure they get properly updated on disk.
*/
static void add_root_to_dirty_list(struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
if (test_bit(BTRFS_ROOT_DIRTY, &root->state) ||
!test_bit(BTRFS_ROOT_TRACK_DIRTY, &root->state))
return;
spin_lock(&fs_info->trans_lock);
if (!test_and_set_bit(BTRFS_ROOT_DIRTY, &root->state)) {
/* Want the extent tree to be the last on the list */
if (root->root_key.objectid == BTRFS_EXTENT_TREE_OBJECTID)
list_move_tail(&root->dirty_list,
&fs_info->dirty_cowonly_roots);
else
list_move(&root->dirty_list,
&fs_info->dirty_cowonly_roots);
}
spin_unlock(&fs_info->trans_lock);
}
/*
* used by snapshot creation to make a copy of a root for a tree with
* a given objectid. The buffer with the new root node is returned in
* cow_ret, and this func returns zero on success or a negative error code.
*/
int btrfs_copy_root(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf,
struct extent_buffer **cow_ret, u64 new_root_objectid)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *cow;
int ret = 0;
int level;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
struct btrfs_disk_key disk_key;
btrfs: qgroup: track metadata relocation COW with simple quota Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22 00:37:23 +00:00
u64 reloc_src_root = 0;
WARN_ON(test_bit(BTRFS_ROOT_SHAREABLE, &root->state) &&
trans->transid != fs_info->running_transaction->transid);
WARN_ON(test_bit(BTRFS_ROOT_SHAREABLE, &root->state) &&
trans->transid != root->last_trans);
level = btrfs_header_level(buf);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (level == 0)
btrfs_item_key(buf, &disk_key, 0);
else
btrfs_node_key(buf, &disk_key, 0);
btrfs: qgroup: track metadata relocation COW with simple quota Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22 00:37:23 +00:00
if (new_root_objectid == BTRFS_TREE_RELOC_OBJECTID)
reloc_src_root = btrfs_header_owner(buf);
cow = btrfs_alloc_tree_block(trans, root, 0, new_root_objectid,
&disk_key, level, buf->start, 0,
btrfs: qgroup: track metadata relocation COW with simple quota Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22 00:37:23 +00:00
reloc_src_root, BTRFS_NESTING_NEW_ROOT);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (IS_ERR(cow))
return PTR_ERR(cow);
copy_extent_buffer_full(cow, buf);
btrfs_set_header_bytenr(cow, cow->start);
btrfs_set_header_generation(cow, trans->transid);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
btrfs_set_header_backref_rev(cow, BTRFS_MIXED_BACKREF_REV);
btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN |
BTRFS_HEADER_FLAG_RELOC);
if (new_root_objectid == BTRFS_TREE_RELOC_OBJECTID)
btrfs_set_header_flag(cow, BTRFS_HEADER_FLAG_RELOC);
else
btrfs_set_header_owner(cow, new_root_objectid);
write_extent_buffer_fsid(cow, fs_info->fs_devices->metadata_uuid);
WARN_ON(btrfs_header_generation(buf) > trans->transid);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (new_root_objectid == BTRFS_TREE_RELOC_OBJECTID)
ret = btrfs_inc_ref(trans, root, cow, 1);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
else
ret = btrfs_inc_ref(trans, root, cow, 0);
if (ret) {
btrfs_tree_unlock(cow);
free_extent_buffer(cow);
btrfs_abort_transaction(trans, ret);
return ret;
}
btrfs_mark_buffer_dirty(trans, cow);
*cow_ret = cow;
return 0;
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
/*
* check if the tree block can be shared by multiple trees
*/
bool btrfs_block_can_be_shared(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf)
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
{
const u64 buf_gen = btrfs_header_generation(buf);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
/*
* Tree blocks not in shareable trees and tree roots are never shared.
* If a block was allocated after the last snapshot and the block was
* not allocated by tree relocation, we know the block is not shared.
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
*/
if (!test_bit(BTRFS_ROOT_SHAREABLE, &root->state))
return false;
if (buf == root->node)
return false;
if (buf_gen > btrfs_root_last_snapshot(&root->root_item) &&
!btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC))
return false;
if (buf != root->commit_root)
return true;
/*
* An extent buffer that used to be the commit root may still be shared
* because the tree height may have increased and it became a child of a
* higher level root. This can happen when snapshotting a subvolume
* created in the current transaction.
*/
if (buf_gen == trans->transid)
return true;
return false;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
}
static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf,
struct extent_buffer *cow,
int *last_ref)
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
{
struct btrfs_fs_info *fs_info = root->fs_info;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
u64 refs;
u64 owner;
u64 flags;
u64 new_flags = 0;
int ret;
/*
* Backrefs update rules:
*
* Always use full backrefs for extent pointers in tree block
* allocated by tree relocation.
*
* If a shared tree block is no longer referenced by its owner
* tree (btrfs_header_owner(buf) == root->root_key.objectid),
* use full backrefs for extent pointers in tree block.
*
* If a tree block is been relocating
* (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID),
* use full backrefs for extent pointers in tree block.
* The reason for this is some operations (such as drop tree)
* are only allowed for blocks use full backrefs.
*/
btrfs: fix unwritten extent buffer after snapshotting a new subvolume When creating a snapshot of a subvolume that was created in the current transaction, we can end up not persisting a dirty extent buffer that is referenced by the snapshot, resulting in IO errors due to checksum failures when trying to read the extent buffer later from disk. A sequence of steps that leads to this is the following: 1) At ioctl.c:create_subvol() we allocate an extent buffer, with logical address 36007936, for the leaf/root of a new subvolume that has an ID of 291. We mark the extent buffer as dirty, and at this point the subvolume tree has a single node/leaf which is also its root (level 0); 2) We no longer commit the transaction used to create the subvolume at create_subvol(). We used to, but that was recently removed in commit 1b53e51a4a8f ("btrfs: don't commit transaction for every subvol create"); 3) The transaction used to create the subvolume has an ID of 33, so the extent buffer 36007936 has a generation of 33; 4) Several updates happen to subvolume 291 during transaction 33, several files created and its tree height changes from 0 to 1, so we end up with a new root at level 1 and the extent buffer 36007936 is now a leaf of that new root node, which is extent buffer 36048896. The commit root remains as 36007936, since we are still at transaction 33; 5) Creation of a snapshot of subvolume 291, with an ID of 292, starts at ioctl.c:create_snapshot(). This triggers a commit of transaction 33 and we end up at transaction.c:create_pending_snapshot(), in the critical section of a transaction commit. There we COW the root of subvolume 291, which is extent buffer 36048896. The COW operation returns extent buffer 36048896, since there's no need to COW because the extent buffer was created in this transaction and it was not written yet. The we call btrfs_copy_root() against the root node 36048896. During this operation we allocate a new extent buffer to turn into the root node of the snapshot, copy the contents of the root node 36048896 into this snapshot root extent buffer, set the owner to 292 (the ID of the snapshot), etc, and then we call btrfs_inc_ref(). This will create a delayed reference for each leaf pointed by the root node with a reference root of 292 - this includes a reference for the leaf 36007936. After that we set the bit BTRFS_ROOT_FORCE_COW in the root's state. Then we call btrfs_insert_dir_item(), to create the directory entry in in the tree of subvolume 291 that points to the snapshot. This ends up needing to modify leaf 36007936 to insert the respective directory items. Because the bit BTRFS_ROOT_FORCE_COW is set for the root's state, we need to COW the leaf. We end up at btrfs_force_cow_block() and then at update_ref_for_cow(). At update_ref_for_cow() we call btrfs_block_can_be_shared() which returns false, despite the fact the leaf 36007936 is shared - the subvolume's root and the snapshot's root point to that leaf. The reason that it incorrectly returns false is because the commit root of the subvolume is extent buffer 36007936 - it was the initial root of the subvolume when we created it. So btrfs_block_can_be_shared() which has the following logic: int btrfs_block_can_be_shared(struct btrfs_root *root, struct extent_buffer *buf) { if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state) && buf != root->node && buf != root->commit_root && (btrfs_header_generation(buf) <= btrfs_root_last_snapshot(&root->root_item) || btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC))) return 1; return 0; } Returns false (0) since 'buf' (extent buffer 36007936) matches the root's commit root. As a result, at update_ref_for_cow(), we don't check for the number of references for extent buffer 36007936, we just assume it's not shared and therefore that it has only 1 reference, so we set the local variable 'refs' to 1. Later on, in the final if-else statement at update_ref_for_cow(): static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *buf, struct extent_buffer *cow, int *last_ref) { (...) if (refs > 1) { (...) } else { (...) btrfs_clear_buffer_dirty(trans, buf); *last_ref = 1; } } So we mark the extent buffer 36007936 as not dirty, and as a result we don't write it to disk later in the transaction commit, despite the fact that the snapshot's root points to it. Attempting to access the leaf or dumping the tree for example shows that the extent buffer was not written: $ btrfs inspect-internal dump-tree -t 292 /dev/sdb btrfs-progs v6.2.2 file tree key (292 ROOT_ITEM 33) node 36110336 level 1 items 2 free space 119 generation 33 owner 292 node 36110336 flags 0x1(WRITTEN) backref revision 1 checksum stored a8103e3e checksum calced a8103e3e fs uuid 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79 chunk uuid e8c9c885-78f4-4d31-85fe-89e5f5fd4a07 key (256 INODE_ITEM 0) block 36007936 gen 33 key (257 EXTENT_DATA 0) block 36052992 gen 33 checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29 checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29 total bytes 107374182400 bytes used 38572032 uuid 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79 The respective on disk region is full of zeroes as the device was trimmed at mkfs time. Obviously 'btrfs check' also detects and complains about this: $ btrfs check /dev/sdb Opening filesystem to check... Checking filesystem on /dev/sdb UUID: 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79 generation: 33 (33) [1/7] checking root items [2/7] checking extents checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29 checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29 checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29 bad tree block 36007936, bytenr mismatch, want=36007936, have=0 owner ref check failed [36007936 4096] ERROR: errors found in extent allocation tree or chunk allocation [3/7] checking free space tree [4/7] checking fs roots checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29 checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29 checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29 bad tree block 36007936, bytenr mismatch, want=36007936, have=0 The following tree block(s) is corrupted in tree 292: tree block bytenr: 36110336, level: 1, node key: (256, 1, 0) root 292 root dir 256 not found ERROR: errors found in fs roots found 38572032 bytes used, error(s) found total csum bytes: 16048 total tree bytes: 1265664 total fs tree bytes: 1118208 total extent tree bytes: 65536 btree space waste bytes: 562598 file data blocks allocated: 65978368 referenced 36569088 Fix this by updating btrfs_block_can_be_shared() to consider that an extent buffer may be shared if it matches the commit root and if its generation matches the current transaction's generation. This can be reproduced with the following script: $ cat test.sh #!/bin/bash MNT=/mnt/sdi DEV=/dev/sdi # Use a filesystem with a 64K node size so that we have the same node # size on every machine regardless of its page size (on x86_64 default # node size is 16K due to the 4K page size, while on PPC it's 64K by # default). This way we can make sure we are able to create a btree for # the subvolume with a height of 2. mkfs.btrfs -f -n 64K $DEV mount $DEV $MNT btrfs subvolume create $MNT/subvol # Create a few empty files on the subvolume, this bumps its btree # height to 2 (root node at level 1 and 2 leaves). for ((i = 1; i <= 300; i++)); do echo -n > $MNT/subvol/file_$i done btrfs subvolume snapshot -r $MNT/subvol $MNT/subvol/snap umount $DEV btrfs check $DEV Running it on a 6.5 kernel (or any 6.6-rc kernel at the moment): $ ./test.sh Create subvolume '/mnt/sdi/subvol' Create a readonly snapshot of '/mnt/sdi/subvol' in '/mnt/sdi/subvol/snap' Opening filesystem to check... Checking filesystem on /dev/sdi UUID: bbdde2ff-7d02-45ca-8a73-3c36f23755a1 [1/7] checking root items [2/7] checking extents parent transid verify failed on 30539776 wanted 7 found 5 parent transid verify failed on 30539776 wanted 7 found 5 parent transid verify failed on 30539776 wanted 7 found 5 Ignoring transid failure owner ref check failed [30539776 65536] ERROR: errors found in extent allocation tree or chunk allocation [3/7] checking free space tree [4/7] checking fs roots parent transid verify failed on 30539776 wanted 7 found 5 Ignoring transid failure Wrong key of child node/leaf, wanted: (256, 1, 0), have: (2, 132, 0) Wrong generation of child node/leaf, wanted: 5, have: 7 root 257 root dir 256 not found ERROR: errors found in fs roots found 917504 bytes used, error(s) found total csum bytes: 0 total tree bytes: 851968 total fs tree bytes: 393216 total extent tree bytes: 65536 btree space waste bytes: 736550 file data blocks allocated: 0 referenced 0 A test case for fstests will follow soon. Fixes: 1b53e51a4a8f ("btrfs: don't commit transaction for every subvol create") CC: stable@vger.kernel.org # 6.5+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-10-19 12:19:28 +00:00
if (btrfs_block_can_be_shared(trans, root, buf)) {
ret = btrfs_lookup_extent_info(trans, fs_info, buf->start,
btrfs_header_level(buf), 1,
&refs, &flags, NULL);
if (ret)
return ret;
if (unlikely(refs == 0)) {
btrfs_crit(fs_info,
"found 0 references for tree block at bytenr %llu level %d root %llu",
buf->start, btrfs_header_level(buf),
btrfs_root_id(root));
ret = -EUCLEAN;
btrfs_abort_transaction(trans, ret);
return ret;
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
} else {
refs = 1;
if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID ||
btrfs_header_backref_rev(buf) < BTRFS_MIXED_BACKREF_REV)
flags = BTRFS_BLOCK_FLAG_FULL_BACKREF;
else
flags = 0;
}
owner = btrfs_header_owner(buf);
BUG_ON(owner == BTRFS_TREE_RELOC_OBJECTID &&
!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
if (refs > 1) {
if ((owner == root->root_key.objectid ||
root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) &&
!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF)) {
ret = btrfs_inc_ref(trans, root, buf, 1);
if (ret)
return ret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (root->root_key.objectid ==
BTRFS_TREE_RELOC_OBJECTID) {
ret = btrfs_dec_ref(trans, root, buf, 0);
if (ret)
return ret;
ret = btrfs_inc_ref(trans, root, cow, 1);
if (ret)
return ret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
}
new_flags |= BTRFS_BLOCK_FLAG_FULL_BACKREF;
} else {
if (root->root_key.objectid ==
BTRFS_TREE_RELOC_OBJECTID)
ret = btrfs_inc_ref(trans, root, cow, 1);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
else
ret = btrfs_inc_ref(trans, root, cow, 0);
if (ret)
return ret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
}
if (new_flags != 0) {
ret = btrfs_set_disk_extent_flags(trans, buf, new_flags);
if (ret)
return ret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
}
} else {
if (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF) {
if (root->root_key.objectid ==
BTRFS_TREE_RELOC_OBJECTID)
ret = btrfs_inc_ref(trans, root, cow, 1);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
else
ret = btrfs_inc_ref(trans, root, cow, 0);
if (ret)
return ret;
ret = btrfs_dec_ref(trans, root, buf, 1);
if (ret)
return ret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
}
btrfs_clear_buffer_dirty(trans, buf);
*last_ref = 1;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
}
return 0;
}
/*
* does the dirty work in cow of a single block. The parent block (if
* supplied) is updated to point to the new cow copy. The new buffer is marked
* dirty and returned locked. If you modify the block it needs to be marked
* dirty again.
*
* search_start -- an allocation hint for the new block
*
* empty_size -- a hint that you plan on doing more cow. This is the size in
* bytes the allocator should try to find free next to the block it returns.
* This is just a hint and may be ignored by the allocator.
*/
int btrfs_force_cow_block(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf,
struct extent_buffer *parent, int parent_slot,
struct extent_buffer **cow_ret,
u64 search_start, u64 empty_size,
enum btrfs_lock_nesting nest)
{
struct btrfs_fs_info *fs_info = root->fs_info;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
struct btrfs_disk_key disk_key;
struct extent_buffer *cow;
int level, ret;
int last_ref = 0;
int unlock_orig = 0;
u64 parent_start = 0;
btrfs: qgroup: track metadata relocation COW with simple quota Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22 00:37:23 +00:00
u64 reloc_src_root = 0;
if (*cow_ret == buf)
unlock_orig = 1;
btrfs_assert_tree_write_locked(buf);
WARN_ON(test_bit(BTRFS_ROOT_SHAREABLE, &root->state) &&
trans->transid != fs_info->running_transaction->transid);
WARN_ON(test_bit(BTRFS_ROOT_SHAREABLE, &root->state) &&
trans->transid != root->last_trans);
level = btrfs_header_level(buf);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (level == 0)
btrfs_item_key(buf, &disk_key, 0);
else
btrfs_node_key(buf, &disk_key, 0);
btrfs: qgroup: track metadata relocation COW with simple quota Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22 00:37:23 +00:00
if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
if (parent)
parent_start = parent->start;
reloc_src_root = btrfs_header_owner(buf);
}
btrfs: rework chunk allocation to avoid exhaustion of the system chunk array Commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations") fixed a problem that resulted in exhausting the system chunk array in the superblock when there are many tasks allocating chunks in parallel. Basically too many tasks enter the first phase of chunk allocation without previous tasks having finished their second phase of allocation, resulting in too many system chunks being allocated. That was originally observed when running the fallocate tests of stress-ng on a PowerPC machine, using a node size of 64K. However that commit also introduced a deadlock where a task in phase 1 of the chunk allocation waited for another task that had allocated a system chunk to finish its phase 2, but that other task was waiting on an extent buffer lock held by the first task, therefore resulting in both tasks not making any progress. That change was later reverted by a patch with the subject "btrfs: fix deadlock with concurrent chunk allocations involving system chunks", since there is no simple and short solution to address it and the deadlock is relatively easy to trigger on zoned filesystems, while the system chunk array exhaustion is not so common. This change reworks the chunk allocation to avoid the system chunk array exhaustion. It accomplishes that by making the first phase of chunk allocation do the updates of the device items in the chunk btree and the insertion of the new chunk item in the chunk btree. This is done while under the protection of the chunk mutex (fs_info->chunk_mutex), in the same critical section that checks for available system space, allocates a new system chunk if needed and reserves system chunk space. This way we do not have chunk space reserved until the second phase completes. The same logic is applied to chunk removal as well, since it keeps reserved system space long after it is done updating the chunk btree. For direct allocation of system chunks, the previous behaviour remains, because otherwise we would deadlock on extent buffers of the chunk btree. Changes to the chunk btree are by large done by chunk allocation and chunk removal, which first reserve chunk system space and then later do changes to the chunk btree. The other remaining cases are uncommon and correspond to adding a device, removing a device and resizing a device. All these other cases do not pre-reserve system space, they modify the chunk btree right away, so they don't hold reserved space for a long period like chunk allocation and chunk removal do. The diff of this change is huge, but more than half of it is just addition of comments describing both how things work regarding chunk allocation and removal, including both the new behavior and the parts of the old behavior that did not change. CC: stable@vger.kernel.org # 5.12+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-29 13:43:06 +00:00
cow = btrfs_alloc_tree_block(trans, root, parent_start,
root->root_key.objectid, &disk_key, level,
btrfs: qgroup: track metadata relocation COW with simple quota Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22 00:37:23 +00:00
search_start, empty_size, reloc_src_root, nest);
if (IS_ERR(cow))
return PTR_ERR(cow);
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
/* cow is set to blocking by btrfs_init_new_buffer */
copy_extent_buffer_full(cow, buf);
btrfs_set_header_bytenr(cow, cow->start);
btrfs_set_header_generation(cow, trans->transid);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
btrfs_set_header_backref_rev(cow, BTRFS_MIXED_BACKREF_REV);
btrfs_clear_header_flag(cow, BTRFS_HEADER_FLAG_WRITTEN |
BTRFS_HEADER_FLAG_RELOC);
if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
btrfs_set_header_flag(cow, BTRFS_HEADER_FLAG_RELOC);
else
btrfs_set_header_owner(cow, root->root_key.objectid);
write_extent_buffer_fsid(cow, fs_info->fs_devices->metadata_uuid);
ret = update_ref_for_cow(trans, root, buf, cow, &last_ref);
if (ret) {
btrfs: cleanup cow block on error In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead to a system lockup. It gets stuck trying to write back inodes, and the write back thread was trying to lock an extent buffer: $ cat /proc/2143497/stack [<0>] __btrfs_tree_lock+0x108/0x250 [<0>] lock_extent_buffer_for_io+0x35e/0x3a0 [<0>] btree_write_cache_pages+0x15a/0x3b0 [<0>] do_writepages+0x28/0xb0 [<0>] __writeback_single_inode+0x54/0x5c0 [<0>] writeback_sb_inodes+0x1e8/0x510 [<0>] wb_writeback+0xcc/0x440 [<0>] wb_workfn+0xd7/0x650 [<0>] process_one_work+0x236/0x560 [<0>] worker_thread+0x55/0x3c0 [<0>] kthread+0x13a/0x150 [<0>] ret_from_fork+0x1f/0x30 This is because we got an error while COWing a block, specifically here if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) { ret = btrfs_reloc_cow_block(trans, root, buf, cow); if (ret) { btrfs_abort_transaction(trans, ret); return ret; } } [16402.241552] BTRFS: Transaction aborted (error -2) [16402.242362] WARNING: CPU: 1 PID: 2563188 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x376/0x540 [16402.249469] CPU: 1 PID: 2563188 Comm: fsstress Not tainted 5.9.0-rc6+ #8 [16402.249936] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 [16402.250525] RIP: 0010:__btrfs_cow_block+0x376/0x540 [16402.252417] RSP: 0018:ffff9cca40e578b0 EFLAGS: 00010282 [16402.252787] RAX: 0000000000000025 RBX: 0000000000000002 RCX: ffff9132bbd19388 [16402.253278] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9132bbd19380 [16402.254063] RBP: ffff9132b41a49c0 R08: 0000000000000000 R09: 0000000000000000 [16402.254887] R10: 0000000000000000 R11: ffff91324758b080 R12: ffff91326ef17ce0 [16402.255694] R13: ffff91325fc0f000 R14: ffff91326ef176b0 R15: ffff9132815e2000 [16402.256321] FS: 00007f542c6d7b80(0000) GS:ffff9132bbd00000(0000) knlGS:0000000000000000 [16402.256973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16402.257374] CR2: 00007f127b83f250 CR3: 0000000133480002 CR4: 0000000000370ee0 [16402.257867] Call Trace: [16402.258072] btrfs_cow_block+0x109/0x230 [16402.258356] btrfs_search_slot+0x530/0x9d0 [16402.258655] btrfs_lookup_file_extent+0x37/0x40 [16402.259155] __btrfs_drop_extents+0x13c/0xd60 [16402.259628] ? btrfs_block_rsv_migrate+0x4f/0xb0 [16402.259949] btrfs_replace_file_extents+0x190/0x820 [16402.260873] btrfs_clone+0x9ae/0xc00 [16402.261139] btrfs_extent_same_range+0x66/0x90 [16402.261771] btrfs_remap_file_range+0x353/0x3b1 [16402.262333] vfs_dedupe_file_range_one.part.0+0xd5/0x140 [16402.262821] vfs_dedupe_file_range+0x189/0x220 [16402.263150] do_vfs_ioctl+0x552/0x700 [16402.263662] __x64_sys_ioctl+0x62/0xb0 [16402.264023] do_syscall_64+0x33/0x40 [16402.264364] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [16402.264862] RIP: 0033:0x7f542c7d15cb [16402.266901] RSP: 002b:00007ffd35944ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16402.267627] RAX: ffffffffffffffda RBX: 00000000009d1968 RCX: 00007f542c7d15cb [16402.268298] RDX: 00000000009d2490 RSI: 00000000c0189436 RDI: 0000000000000003 [16402.268958] RBP: 00000000009d2520 R08: 0000000000000036 R09: 00000000009d2e64 [16402.269726] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 [16402.270659] R13: 000000000001f000 R14: 00000000009d1970 R15: 00000000009d2e80 [16402.271498] irq event stamp: 0 [16402.271846] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [16402.272497] hardirqs last disabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273343] softirqs last enabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273905] softirqs last disabled at (0): [<0000000000000000>] 0x0 [16402.274338] ---[ end trace 737874a5a41a8236 ]--- [16402.274669] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.276179] BTRFS info (device dm-9): forced readonly [16402.277046] BTRFS: error (device dm-9) in btrfs_replace_file_extents:2723: errno=-2 No such entry [16402.278744] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.279968] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.280582] BTRFS info (device dm-9): balance: ended with status: -30 The problem here is that as soon as we allocate the new block it is locked and marked dirty in the btree inode. This means that we could attempt to writeback this block and need to lock the extent buffer. However we're not unlocking it here and thus we deadlock. Fix this by unlocking the cow block if we have any errors inside of __btrfs_cow_block, and also free it so we do not leak it. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-29 12:53:54 +00:00
btrfs_tree_unlock(cow);
free_extent_buffer(cow);
btrfs_abort_transaction(trans, ret);
return ret;
}
2008-09-26 14:09:34 +00:00
if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) {
ret = btrfs_reloc_cow_block(trans, root, buf, cow);
if (ret) {
btrfs: cleanup cow block on error In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead to a system lockup. It gets stuck trying to write back inodes, and the write back thread was trying to lock an extent buffer: $ cat /proc/2143497/stack [<0>] __btrfs_tree_lock+0x108/0x250 [<0>] lock_extent_buffer_for_io+0x35e/0x3a0 [<0>] btree_write_cache_pages+0x15a/0x3b0 [<0>] do_writepages+0x28/0xb0 [<0>] __writeback_single_inode+0x54/0x5c0 [<0>] writeback_sb_inodes+0x1e8/0x510 [<0>] wb_writeback+0xcc/0x440 [<0>] wb_workfn+0xd7/0x650 [<0>] process_one_work+0x236/0x560 [<0>] worker_thread+0x55/0x3c0 [<0>] kthread+0x13a/0x150 [<0>] ret_from_fork+0x1f/0x30 This is because we got an error while COWing a block, specifically here if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) { ret = btrfs_reloc_cow_block(trans, root, buf, cow); if (ret) { btrfs_abort_transaction(trans, ret); return ret; } } [16402.241552] BTRFS: Transaction aborted (error -2) [16402.242362] WARNING: CPU: 1 PID: 2563188 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x376/0x540 [16402.249469] CPU: 1 PID: 2563188 Comm: fsstress Not tainted 5.9.0-rc6+ #8 [16402.249936] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 [16402.250525] RIP: 0010:__btrfs_cow_block+0x376/0x540 [16402.252417] RSP: 0018:ffff9cca40e578b0 EFLAGS: 00010282 [16402.252787] RAX: 0000000000000025 RBX: 0000000000000002 RCX: ffff9132bbd19388 [16402.253278] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9132bbd19380 [16402.254063] RBP: ffff9132b41a49c0 R08: 0000000000000000 R09: 0000000000000000 [16402.254887] R10: 0000000000000000 R11: ffff91324758b080 R12: ffff91326ef17ce0 [16402.255694] R13: ffff91325fc0f000 R14: ffff91326ef176b0 R15: ffff9132815e2000 [16402.256321] FS: 00007f542c6d7b80(0000) GS:ffff9132bbd00000(0000) knlGS:0000000000000000 [16402.256973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16402.257374] CR2: 00007f127b83f250 CR3: 0000000133480002 CR4: 0000000000370ee0 [16402.257867] Call Trace: [16402.258072] btrfs_cow_block+0x109/0x230 [16402.258356] btrfs_search_slot+0x530/0x9d0 [16402.258655] btrfs_lookup_file_extent+0x37/0x40 [16402.259155] __btrfs_drop_extents+0x13c/0xd60 [16402.259628] ? btrfs_block_rsv_migrate+0x4f/0xb0 [16402.259949] btrfs_replace_file_extents+0x190/0x820 [16402.260873] btrfs_clone+0x9ae/0xc00 [16402.261139] btrfs_extent_same_range+0x66/0x90 [16402.261771] btrfs_remap_file_range+0x353/0x3b1 [16402.262333] vfs_dedupe_file_range_one.part.0+0xd5/0x140 [16402.262821] vfs_dedupe_file_range+0x189/0x220 [16402.263150] do_vfs_ioctl+0x552/0x700 [16402.263662] __x64_sys_ioctl+0x62/0xb0 [16402.264023] do_syscall_64+0x33/0x40 [16402.264364] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [16402.264862] RIP: 0033:0x7f542c7d15cb [16402.266901] RSP: 002b:00007ffd35944ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16402.267627] RAX: ffffffffffffffda RBX: 00000000009d1968 RCX: 00007f542c7d15cb [16402.268298] RDX: 00000000009d2490 RSI: 00000000c0189436 RDI: 0000000000000003 [16402.268958] RBP: 00000000009d2520 R08: 0000000000000036 R09: 00000000009d2e64 [16402.269726] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 [16402.270659] R13: 000000000001f000 R14: 00000000009d1970 R15: 00000000009d2e80 [16402.271498] irq event stamp: 0 [16402.271846] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [16402.272497] hardirqs last disabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273343] softirqs last enabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273905] softirqs last disabled at (0): [<0000000000000000>] 0x0 [16402.274338] ---[ end trace 737874a5a41a8236 ]--- [16402.274669] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.276179] BTRFS info (device dm-9): forced readonly [16402.277046] BTRFS: error (device dm-9) in btrfs_replace_file_extents:2723: errno=-2 No such entry [16402.278744] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.279968] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.280582] BTRFS info (device dm-9): balance: ended with status: -30 The problem here is that as soon as we allocate the new block it is locked and marked dirty in the btree inode. This means that we could attempt to writeback this block and need to lock the extent buffer. However we're not unlocking it here and thus we deadlock. Fix this by unlocking the cow block if we have any errors inside of __btrfs_cow_block, and also free it so we do not leak it. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-29 12:53:54 +00:00
btrfs_tree_unlock(cow);
free_extent_buffer(cow);
btrfs_abort_transaction(trans, ret);
return ret;
}
}
if (buf == root->node) {
WARN_ON(parent && parent != buf);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID ||
btrfs_header_backref_rev(buf) < BTRFS_MIXED_BACKREF_REV)
parent_start = buf->start;
ret = btrfs_tree_mod_log_insert_root(root->node, cow, true);
if (ret < 0) {
btrfs_tree_unlock(cow);
free_extent_buffer(cow);
btrfs_abort_transaction(trans, ret);
return ret;
}
atomic_inc(&cow->refs);
rcu_assign_pointer(root->node, cow);
btrfs: fix invalid delayed ref after subvolume creation failure When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the new root's root item into the root tree, we are freeing the metadata extent we reserved for the new root to prevent a metadata extent leak, as we don't abort the transaction at that point (since there is nothing at that point that is irreversible). However we allocated the metadata extent for the new root which we are creating for the new subvolume, so its delayed reference refers to the ID of this new root. But when we free the metadata extent we pass the root of the subvolume where the new subvolume is located to btrfs_free_tree_block() - this is incorrect because this will generate a delayed reference that refers to the ID of the parent subvolume's root, and not to ID of the new root. This results in a failure when running delayed references that leads to a transaction abort and a trace like the following: [3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs] [3868.739857] Code: 68 0f 85 e6 fb ff (...) [3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246 [3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002 [3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88 [3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88 [3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000 [3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88 [3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000 [3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0 [3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [3868.757803] Call Trace: [3868.758281] <TASK> [3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs] [3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs] [3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs] [3868.762069] ? lock_acquired+0x19f/0x420 [3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs] [3868.763860] ? _raw_spin_unlock+0x29/0x40 [3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs] [3868.765870] create_subvol+0x1d8/0x9a0 [btrfs] [3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs] [3868.767669] ? preempt_count_add+0x49/0xa0 [3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [3868.769639] ? _copy_from_user+0x66/0xa0 [3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [3868.772364] ? __slab_free+0x10a/0x360 [3868.773198] ? rcu_read_lock_sched_held+0x12/0x60 [3868.774121] ? lock_release+0x223/0x4a0 [3868.774863] ? lock_acquired+0x19f/0x420 [3868.775634] ? rcu_read_lock_sched_held+0x12/0x60 [3868.776530] ? trace_hardirqs_on+0x1b/0xe0 [3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [3868.778280] ? kmem_cache_free+0x321/0x3c0 [3868.779011] ? __x64_sys_ioctl+0x83/0xb0 [3868.779718] __x64_sys_ioctl+0x83/0xb0 [3868.780387] do_syscall_64+0x3b/0xc0 [3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae [3868.781953] RIP: 0033:0x7f281c59e957 [3868.782585] Code: 3c 1c 48 f7 d8 4c (...) [3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957 [3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003 [3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36 [3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc [3868.793765] </TASK> [3868.794037] irq event stamp: 0 [3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0 [3868.799284] ---[ end trace be24c7002fe27747 ]--- [3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2 [3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627 [3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33 [3868.802863] extent refs 1 gen 1265 flags 2 [3868.803447] ref#0: tree block backref root 1610 (...) [3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33 [3869.065421] extent refs 1 gen 1268 flags 2 [3869.066115] ref#0: tree block backref root 1689 (...) [3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0 [3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry [3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry Fix this by passing the new subvolume's root ID to btrfs_free_tree_block(). This requires changing the root argument of btrfs_free_tree_block() from struct btrfs_root * to a u64, since at this point during the subvolume creation we have not yet created the struct btrfs_root for the new subvolume, and btrfs_free_tree_block() only needs a root ID and nothing else from a struct btrfs_root. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-13 08:45:12 +00:00
btrfs_free_tree_block(trans, btrfs_root_id(root), buf,
parent_start, last_ref);
free_extent_buffer(buf);
add_root_to_dirty_list(root);
} else {
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
WARN_ON(trans->transid != btrfs_header_generation(parent));
ret = btrfs_tree_mod_log_insert_key(parent, parent_slot,
BTRFS_MOD_LOG_KEY_REPLACE);
if (ret) {
btrfs_tree_unlock(cow);
free_extent_buffer(cow);
btrfs_abort_transaction(trans, ret);
return ret;
}
btrfs_set_node_blockptr(parent, parent_slot,
cow->start);
btrfs_set_node_ptr_generation(parent, parent_slot,
trans->transid);
btrfs_mark_buffer_dirty(trans, parent);
Btrfs: fix tree mod logging While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-20 15:17:46 +00:00
if (last_ref) {
ret = btrfs_tree_mod_log_free_eb(buf);
Btrfs: fix tree mod logging While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-20 15:17:46 +00:00
if (ret) {
btrfs: cleanup cow block on error In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead to a system lockup. It gets stuck trying to write back inodes, and the write back thread was trying to lock an extent buffer: $ cat /proc/2143497/stack [<0>] __btrfs_tree_lock+0x108/0x250 [<0>] lock_extent_buffer_for_io+0x35e/0x3a0 [<0>] btree_write_cache_pages+0x15a/0x3b0 [<0>] do_writepages+0x28/0xb0 [<0>] __writeback_single_inode+0x54/0x5c0 [<0>] writeback_sb_inodes+0x1e8/0x510 [<0>] wb_writeback+0xcc/0x440 [<0>] wb_workfn+0xd7/0x650 [<0>] process_one_work+0x236/0x560 [<0>] worker_thread+0x55/0x3c0 [<0>] kthread+0x13a/0x150 [<0>] ret_from_fork+0x1f/0x30 This is because we got an error while COWing a block, specifically here if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) { ret = btrfs_reloc_cow_block(trans, root, buf, cow); if (ret) { btrfs_abort_transaction(trans, ret); return ret; } } [16402.241552] BTRFS: Transaction aborted (error -2) [16402.242362] WARNING: CPU: 1 PID: 2563188 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x376/0x540 [16402.249469] CPU: 1 PID: 2563188 Comm: fsstress Not tainted 5.9.0-rc6+ #8 [16402.249936] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 [16402.250525] RIP: 0010:__btrfs_cow_block+0x376/0x540 [16402.252417] RSP: 0018:ffff9cca40e578b0 EFLAGS: 00010282 [16402.252787] RAX: 0000000000000025 RBX: 0000000000000002 RCX: ffff9132bbd19388 [16402.253278] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9132bbd19380 [16402.254063] RBP: ffff9132b41a49c0 R08: 0000000000000000 R09: 0000000000000000 [16402.254887] R10: 0000000000000000 R11: ffff91324758b080 R12: ffff91326ef17ce0 [16402.255694] R13: ffff91325fc0f000 R14: ffff91326ef176b0 R15: ffff9132815e2000 [16402.256321] FS: 00007f542c6d7b80(0000) GS:ffff9132bbd00000(0000) knlGS:0000000000000000 [16402.256973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16402.257374] CR2: 00007f127b83f250 CR3: 0000000133480002 CR4: 0000000000370ee0 [16402.257867] Call Trace: [16402.258072] btrfs_cow_block+0x109/0x230 [16402.258356] btrfs_search_slot+0x530/0x9d0 [16402.258655] btrfs_lookup_file_extent+0x37/0x40 [16402.259155] __btrfs_drop_extents+0x13c/0xd60 [16402.259628] ? btrfs_block_rsv_migrate+0x4f/0xb0 [16402.259949] btrfs_replace_file_extents+0x190/0x820 [16402.260873] btrfs_clone+0x9ae/0xc00 [16402.261139] btrfs_extent_same_range+0x66/0x90 [16402.261771] btrfs_remap_file_range+0x353/0x3b1 [16402.262333] vfs_dedupe_file_range_one.part.0+0xd5/0x140 [16402.262821] vfs_dedupe_file_range+0x189/0x220 [16402.263150] do_vfs_ioctl+0x552/0x700 [16402.263662] __x64_sys_ioctl+0x62/0xb0 [16402.264023] do_syscall_64+0x33/0x40 [16402.264364] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [16402.264862] RIP: 0033:0x7f542c7d15cb [16402.266901] RSP: 002b:00007ffd35944ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16402.267627] RAX: ffffffffffffffda RBX: 00000000009d1968 RCX: 00007f542c7d15cb [16402.268298] RDX: 00000000009d2490 RSI: 00000000c0189436 RDI: 0000000000000003 [16402.268958] RBP: 00000000009d2520 R08: 0000000000000036 R09: 00000000009d2e64 [16402.269726] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 [16402.270659] R13: 000000000001f000 R14: 00000000009d1970 R15: 00000000009d2e80 [16402.271498] irq event stamp: 0 [16402.271846] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [16402.272497] hardirqs last disabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273343] softirqs last enabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0 [16402.273905] softirqs last disabled at (0): [<0000000000000000>] 0x0 [16402.274338] ---[ end trace 737874a5a41a8236 ]--- [16402.274669] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.276179] BTRFS info (device dm-9): forced readonly [16402.277046] BTRFS: error (device dm-9) in btrfs_replace_file_extents:2723: errno=-2 No such entry [16402.278744] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.279968] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry [16402.280582] BTRFS info (device dm-9): balance: ended with status: -30 The problem here is that as soon as we allocate the new block it is locked and marked dirty in the btree inode. This means that we could attempt to writeback this block and need to lock the extent buffer. However we're not unlocking it here and thus we deadlock. Fix this by unlocking the cow block if we have any errors inside of __btrfs_cow_block, and also free it so we do not leak it. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-29 12:53:54 +00:00
btrfs_tree_unlock(cow);
free_extent_buffer(cow);
btrfs_abort_transaction(trans, ret);
Btrfs: fix tree mod logging While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-20 15:17:46 +00:00
return ret;
}
}
btrfs: fix invalid delayed ref after subvolume creation failure When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the new root's root item into the root tree, we are freeing the metadata extent we reserved for the new root to prevent a metadata extent leak, as we don't abort the transaction at that point (since there is nothing at that point that is irreversible). However we allocated the metadata extent for the new root which we are creating for the new subvolume, so its delayed reference refers to the ID of this new root. But when we free the metadata extent we pass the root of the subvolume where the new subvolume is located to btrfs_free_tree_block() - this is incorrect because this will generate a delayed reference that refers to the ID of the parent subvolume's root, and not to ID of the new root. This results in a failure when running delayed references that leads to a transaction abort and a trace like the following: [3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs] [3868.739857] Code: 68 0f 85 e6 fb ff (...) [3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246 [3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002 [3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88 [3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88 [3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000 [3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88 [3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000 [3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0 [3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [3868.757803] Call Trace: [3868.758281] <TASK> [3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs] [3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs] [3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs] [3868.762069] ? lock_acquired+0x19f/0x420 [3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs] [3868.763860] ? _raw_spin_unlock+0x29/0x40 [3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs] [3868.765870] create_subvol+0x1d8/0x9a0 [btrfs] [3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs] [3868.767669] ? preempt_count_add+0x49/0xa0 [3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [3868.769639] ? _copy_from_user+0x66/0xa0 [3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [3868.772364] ? __slab_free+0x10a/0x360 [3868.773198] ? rcu_read_lock_sched_held+0x12/0x60 [3868.774121] ? lock_release+0x223/0x4a0 [3868.774863] ? lock_acquired+0x19f/0x420 [3868.775634] ? rcu_read_lock_sched_held+0x12/0x60 [3868.776530] ? trace_hardirqs_on+0x1b/0xe0 [3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [3868.778280] ? kmem_cache_free+0x321/0x3c0 [3868.779011] ? __x64_sys_ioctl+0x83/0xb0 [3868.779718] __x64_sys_ioctl+0x83/0xb0 [3868.780387] do_syscall_64+0x3b/0xc0 [3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae [3868.781953] RIP: 0033:0x7f281c59e957 [3868.782585] Code: 3c 1c 48 f7 d8 4c (...) [3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957 [3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003 [3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36 [3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc [3868.793765] </TASK> [3868.794037] irq event stamp: 0 [3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0 [3868.799284] ---[ end trace be24c7002fe27747 ]--- [3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2 [3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627 [3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33 [3868.802863] extent refs 1 gen 1265 flags 2 [3868.803447] ref#0: tree block backref root 1610 (...) [3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33 [3869.065421] extent refs 1 gen 1268 flags 2 [3869.066115] ref#0: tree block backref root 1689 (...) [3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0 [3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry [3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry Fix this by passing the new subvolume's root ID to btrfs_free_tree_block(). This requires changing the root argument of btrfs_free_tree_block() from struct btrfs_root * to a u64, since at this point during the subvolume creation we have not yet created the struct btrfs_root for the new subvolume, and btrfs_free_tree_block() only needs a root ID and nothing else from a struct btrfs_root. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-13 08:45:12 +00:00
btrfs_free_tree_block(trans, btrfs_root_id(root), buf,
parent_start, last_ref);
}
if (unlock_orig)
btrfs_tree_unlock(buf);
free_extent_buffer_stale(buf);
btrfs_mark_buffer_dirty(trans, cow);
*cow_ret = cow;
return 0;
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
static inline int should_cow_block(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf)
{
if (btrfs_is_testing(root->fs_info))
return 0;
/* Ensure we can see the FORCE_COW bit */
smp_mb__before_atomic();
/*
* We do not need to cow a block if
* 1) this block is not created or changed in this transaction;
* 2) this block does not belong to TREE_RELOC tree;
* 3) the root is not forced COW.
*
* What is forced COW:
* when we create snapshot during committing the transaction,
* after we've finished copying src root, we must COW the shared
* block to ensure the metadata consistency.
*/
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (btrfs_header_generation(buf) == trans->transid &&
!btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN) &&
!(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID &&
btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)) &&
!test_bit(BTRFS_ROOT_FORCE_COW, &root->state))
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
return 0;
return 1;
}
/*
* COWs a single block, see btrfs_force_cow_block() for the real work.
* This version of it has extra checks so that a block isn't COWed more than
* once per transaction, as long as it hasn't been written yet
*/
int btrfs_cow_block(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct extent_buffer *buf,
struct extent_buffer *parent, int parent_slot,
struct extent_buffer **cow_ret,
enum btrfs_lock_nesting nest)
{
struct btrfs_fs_info *fs_info = root->fs_info;
u64 search_start;
int ret;
if (unlikely(test_bit(BTRFS_ROOT_DELETING, &root->state))) {
btrfs_abort_transaction(trans, -EUCLEAN);
btrfs_crit(fs_info,
"attempt to COW block %llu on root %llu that is being deleted",
buf->start, btrfs_root_id(root));
return -EUCLEAN;
}
btrfs: error out when COWing block using a stale transaction At btrfs_cow_block() we have these checks to verify we are not using a stale transaction (a past transaction with an unblocked state or higher), and the only thing we do is to trigger a WARN with a message and a stack trace. This however is a critical problem, highly unexpected and if it happens it's most likely due to a bug, so we should error out and turn the fs into error state so that such issue is much more easily noticed if it's triggered. The problem is critical because using such stale transaction will lead to not persisting the extent buffer used for the COW operation, as allocating a tree block adds the range of the respective extent buffer to the ->dirty_pages iotree of the transaction, and a stale transaction, in the unlocked state or higher, will not flush dirty extent buffers anymore, therefore resulting in not persisting the tree block and resource leaks (not cleaning the dirty_pages iotree for example). So do the following changes: 1) Return -EUCLEAN if we find a stale transaction; 2) Turn the fs into error state, with error -EUCLEAN, so that no transaction can be committed, and generate a stack trace; 3) Combine both conditions into a single if statement, as both are related and have the same error message; 4) Mark the check as unlikely, since this is not expected to ever happen. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-27 11:09:21 +00:00
/*
* COWing must happen through a running transaction, which always
* matches the current fs generation (it's a transaction with a state
* less than TRANS_STATE_UNBLOCKED). If it doesn't, then turn the fs
* into error state to prevent the commit of any transaction.
*/
if (unlikely(trans->transaction != fs_info->running_transaction ||
trans->transid != fs_info->generation)) {
btrfs_abort_transaction(trans, -EUCLEAN);
btrfs_crit(fs_info,
"unexpected transaction when attempting to COW block %llu on root %llu, transaction %llu running transaction %llu fs generation %llu",
buf->start, btrfs_root_id(root), trans->transid,
fs_info->running_transaction->transid,
fs_info->generation);
return -EUCLEAN;
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (!should_cow_block(trans, root, buf)) {
*cow_ret = buf;
return 0;
}
search_start = round_down(buf->start, SZ_1G);
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
btrfs: qgroup: Use delayed subtree rescan for balance Before this patch, qgroup code traces the whole subtree of subvolume and reloc trees unconditionally. This makes qgroup numbers consistent, but it could cause tons of unnecessary extent tracing, which causes a lot of overhead. However for subtree swap of balance, just swap both subtrees because they contain the same contents and tree structure, so qgroup numbers won't change. It's the race window between subtree swap and transaction commit could cause qgroup number change. This patch will delay the qgroup subtree scan until COW happens for the subtree root. So if there is no other operations for the fs, balance won't cause extra qgroup overhead. (best case scenario) Depending on the workload, most of the subtree scan can still be avoided. Only for worst case scenario, it will fall back to old subtree swap overhead. (scan all swapped subtrees) [[Benchmark]] Hardware: VM 4G vRAM, 8 vCPUs, disk is using 'unsafe' cache mode, backing device is SAMSUNG 850 evo SSD. Host has 16G ram. Mkfs parameter: --nodesize 4K (To bump up tree size) Initial subvolume contents: 4G data copied from /usr and /lib. (With enough regular small files) Snapshots: 16 snapshots of the original subvolume. each snapshot has 3 random files modified. balance parameter: -m So the content should be pretty similar to a real world root fs layout. And after file system population, there is no other activity, so it should be the best case scenario. | v4.20-rc1 | w/ patchset | diff ----------------------------------------------------------------------- relocated extents | 22615 | 22457 | -0.1% qgroup dirty extents | 163457 | 121606 | -25.6% time (sys) | 22.884s | 18.842s | -17.6% time (real) | 27.724s | 22.884s | -17.5% Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 07:15:17 +00:00
/*
* Before CoWing this block for later modification, check if it's
* the subtree root and do the delayed subtree trace if needed.
*
* Also We don't care about the error, as it's handled internally.
*/
btrfs_qgroup_trace_subtree_after_cow(trans, root, buf);
ret = btrfs_force_cow_block(trans, root, buf, parent, parent_slot,
cow_ret, search_start, 0, nest);
Btrfs: add initial tracepoint support for btrfs Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-24 11:18:59 +00:00
trace_btrfs_cow_block(root, buf, *cow_ret);
return ret;
}
ALLOW_ERROR_INJECTION(btrfs_cow_block, ERRNO);
Btrfs: batch extent inserts/updates/deletions on the extent root While profiling the allocator I noticed a good amount of time was being spent in finish_current_insert and del_pending_extents, and as the filesystem filled up more and more time was being spent in those functions. This patch aims to try and reduce that problem. This happens two ways 1) track if we tried to delete an extent that we are going to update or insert. Once we get into finish_current_insert we discard any of the extents that were marked for deletion. This saves us from doing unnecessary work almost every time finish_current_insert runs. 2) Batch insertion/updates/deletions. Instead of doing a btrfs_search_slot for each individual extent and doing the needed operation, we instead keep the leaf around and see if there is anything else we can do on that leaf. On the insert case I introduced a btrfs_insert_some_items, which will take an array of keys with an array of data_sizes and try and squeeze in as many of those keys as possible, and then return how many keys it was able to insert. In the update case we search for an extent ref, update the ref and then loop through the leaf to see if any of the other refs we are looking to update are on that leaf, and then once we are done we release the path and search for the next ref we need to update. And finally for the deletion we try and delete the extent+ref in pairs, so we will try to find extent+ref pairs next to the extent we are trying to free and free them in bulk if possible. This along with the other cluster fix that Chris pushed out a bit ago helps make the allocator preform more uniformly as it fills up the disk. There is still a slight drop as we fill up the disk since we start having to stick new blocks in odd places which results in more COW's than on a empty fs, but the drop is not nearly as severe as it was before. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2008-11-12 19:19:50 +00:00
/*
* same as comp_keys only with two btrfs_key's
*/
int __pure btrfs_comp_cpu_keys(const struct btrfs_key *k1, const struct btrfs_key *k2)
Btrfs: batch extent inserts/updates/deletions on the extent root While profiling the allocator I noticed a good amount of time was being spent in finish_current_insert and del_pending_extents, and as the filesystem filled up more and more time was being spent in those functions. This patch aims to try and reduce that problem. This happens two ways 1) track if we tried to delete an extent that we are going to update or insert. Once we get into finish_current_insert we discard any of the extents that were marked for deletion. This saves us from doing unnecessary work almost every time finish_current_insert runs. 2) Batch insertion/updates/deletions. Instead of doing a btrfs_search_slot for each individual extent and doing the needed operation, we instead keep the leaf around and see if there is anything else we can do on that leaf. On the insert case I introduced a btrfs_insert_some_items, which will take an array of keys with an array of data_sizes and try and squeeze in as many of those keys as possible, and then return how many keys it was able to insert. In the update case we search for an extent ref, update the ref and then loop through the leaf to see if any of the other refs we are looking to update are on that leaf, and then once we are done we release the path and search for the next ref we need to update. And finally for the deletion we try and delete the extent+ref in pairs, so we will try to find extent+ref pairs next to the extent we are trying to free and free them in bulk if possible. This along with the other cluster fix that Chris pushed out a bit ago helps make the allocator preform more uniformly as it fills up the disk. There is still a slight drop as we fill up the disk since we start having to stick new blocks in odd places which results in more COW's than on a empty fs, but the drop is not nearly as severe as it was before. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2008-11-12 19:19:50 +00:00
{
if (k1->objectid > k2->objectid)
return 1;
if (k1->objectid < k2->objectid)
return -1;
if (k1->type > k2->type)
return 1;
if (k1->type < k2->type)
return -1;
if (k1->offset > k2->offset)
return 1;
if (k1->offset < k2->offset)
return -1;
return 0;
}
/*
* Search for a key in the given extent_buffer.
*
btrfs: do unsigned integer division in the extent buffer binary search loop In the search loop of the binary search function, we are doing a division by 2 of the sum of the high and low slots. Because the slots are integers, the generated assembly code for it is the following on x86_64: 0x00000000000141f1 <+145>: mov %eax,%ebx 0x00000000000141f3 <+147>: shr $0x1f,%ebx 0x00000000000141f6 <+150>: add %eax,%ebx 0x00000000000141f8 <+152>: sar %ebx It's a few more instructions than a simple right shift, because signed integer division needs to round towards zero. However we know that slots can never be negative (btrfs_header_nritems() returns an u32), so we can instead use unsigned types for the low and high slots and therefore use unsigned integer division, which results in a single instruction on x86_64: 0x00000000000141f0 <+144>: shr %ebx So use unsigned types for the slots and therefore unsigned division. This is part of a small patchset comprised of the following two patches: btrfs: eliminate extra call when doing binary search on extent buffer btrfs: do unsigned integer division in the extent buffer binary search loop The following fs_mark test was run on a non-debug kernel (Debian's default kernel config) before and after applying the patchset: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" FILES=100000 THREADS=$(nproc --all) FILE_SIZE=0 umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT OPTS="-S 0 -L 6 -n $FILES -s $FILE_SIZE -t $THREADS -k" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT Results before applying patchset: FSUse% Count Size Files/sec App Overhead 2 1200000 0 174472.0 11549868 4 2400000 0 253503.0 11694618 4 3600000 0 257833.1 11611508 6 4800000 0 247089.5 11665983 6 6000000 0 211296.1 12121244 10 7200000 0 187330.6 12548565 Results after applying patchset: FSUse% Count Size Files/sec App Overhead 2 1200000 0 207556.0 11393252 4 2400000 0 266751.1 11347909 4 3600000 0 274397.5 11270058 6 4800000 0 259608.4 11442250 6 6000000 0 238895.8 11635921 8 7200000 0 211942.2 11873825 Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-02-08 17:46:49 +00:00
* The lower boundary for the search is specified by the slot number @first_slot.
* Use a value of 0 to search over the whole extent buffer. Works for both
* leaves and nodes.
*
* The slot in the extent buffer is returned via @slot. If the key exists in the
* extent buffer, then @slot will point to the slot where the key is, otherwise
* it points to the slot where you would insert the key.
*
* Slot may point to the total number of items (i.e. one position beyond the last
* key) if the key is bigger than the last key in the extent buffer.
*/
int btrfs_bin_search(struct extent_buffer *eb, int first_slot,
const struct btrfs_key *key, int *slot)
{
unsigned long p;
int item_size;
btrfs: do unsigned integer division in the extent buffer binary search loop In the search loop of the binary search function, we are doing a division by 2 of the sum of the high and low slots. Because the slots are integers, the generated assembly code for it is the following on x86_64: 0x00000000000141f1 <+145>: mov %eax,%ebx 0x00000000000141f3 <+147>: shr $0x1f,%ebx 0x00000000000141f6 <+150>: add %eax,%ebx 0x00000000000141f8 <+152>: sar %ebx It's a few more instructions than a simple right shift, because signed integer division needs to round towards zero. However we know that slots can never be negative (btrfs_header_nritems() returns an u32), so we can instead use unsigned types for the low and high slots and therefore use unsigned integer division, which results in a single instruction on x86_64: 0x00000000000141f0 <+144>: shr %ebx So use unsigned types for the slots and therefore unsigned division. This is part of a small patchset comprised of the following two patches: btrfs: eliminate extra call when doing binary search on extent buffer btrfs: do unsigned integer division in the extent buffer binary search loop The following fs_mark test was run on a non-debug kernel (Debian's default kernel config) before and after applying the patchset: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" FILES=100000 THREADS=$(nproc --all) FILE_SIZE=0 umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT OPTS="-S 0 -L 6 -n $FILES -s $FILE_SIZE -t $THREADS -k" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT Results before applying patchset: FSUse% Count Size Files/sec App Overhead 2 1200000 0 174472.0 11549868 4 2400000 0 253503.0 11694618 4 3600000 0 257833.1 11611508 6 4800000 0 247089.5 11665983 6 6000000 0 211296.1 12121244 10 7200000 0 187330.6 12548565 Results after applying patchset: FSUse% Count Size Files/sec App Overhead 2 1200000 0 207556.0 11393252 4 2400000 0 266751.1 11347909 4 3600000 0 274397.5 11270058 6 4800000 0 259608.4 11442250 6 6000000 0 238895.8 11635921 8 7200000 0 211942.2 11873825 Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-02-08 17:46:49 +00:00
/*
* Use unsigned types for the low and high slots, so that we get a more
* efficient division in the search loop below.
*/
u32 low = first_slot;
u32 high = btrfs_header_nritems(eb);
int ret;
const int key_size = sizeof(struct btrfs_disk_key);
btrfs: do unsigned integer division in the extent buffer binary search loop In the search loop of the binary search function, we are doing a division by 2 of the sum of the high and low slots. Because the slots are integers, the generated assembly code for it is the following on x86_64: 0x00000000000141f1 <+145>: mov %eax,%ebx 0x00000000000141f3 <+147>: shr $0x1f,%ebx 0x00000000000141f6 <+150>: add %eax,%ebx 0x00000000000141f8 <+152>: sar %ebx It's a few more instructions than a simple right shift, because signed integer division needs to round towards zero. However we know that slots can never be negative (btrfs_header_nritems() returns an u32), so we can instead use unsigned types for the low and high slots and therefore use unsigned integer division, which results in a single instruction on x86_64: 0x00000000000141f0 <+144>: shr %ebx So use unsigned types for the slots and therefore unsigned division. This is part of a small patchset comprised of the following two patches: btrfs: eliminate extra call when doing binary search on extent buffer btrfs: do unsigned integer division in the extent buffer binary search loop The following fs_mark test was run on a non-debug kernel (Debian's default kernel config) before and after applying the patchset: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" FILES=100000 THREADS=$(nproc --all) FILE_SIZE=0 umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT OPTS="-S 0 -L 6 -n $FILES -s $FILE_SIZE -t $THREADS -k" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT Results before applying patchset: FSUse% Count Size Files/sec App Overhead 2 1200000 0 174472.0 11549868 4 2400000 0 253503.0 11694618 4 3600000 0 257833.1 11611508 6 4800000 0 247089.5 11665983 6 6000000 0 211296.1 12121244 10 7200000 0 187330.6 12548565 Results after applying patchset: FSUse% Count Size Files/sec App Overhead 2 1200000 0 207556.0 11393252 4 2400000 0 266751.1 11347909 4 3600000 0 274397.5 11270058 6 4800000 0 259608.4 11442250 6 6000000 0 238895.8 11635921 8 7200000 0 211942.2 11873825 Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-02-08 17:46:49 +00:00
if (unlikely(low > high)) {
btrfs_err(eb->fs_info,
btrfs: do unsigned integer division in the extent buffer binary search loop In the search loop of the binary search function, we are doing a division by 2 of the sum of the high and low slots. Because the slots are integers, the generated assembly code for it is the following on x86_64: 0x00000000000141f1 <+145>: mov %eax,%ebx 0x00000000000141f3 <+147>: shr $0x1f,%ebx 0x00000000000141f6 <+150>: add %eax,%ebx 0x00000000000141f8 <+152>: sar %ebx It's a few more instructions than a simple right shift, because signed integer division needs to round towards zero. However we know that slots can never be negative (btrfs_header_nritems() returns an u32), so we can instead use unsigned types for the low and high slots and therefore use unsigned integer division, which results in a single instruction on x86_64: 0x00000000000141f0 <+144>: shr %ebx So use unsigned types for the slots and therefore unsigned division. This is part of a small patchset comprised of the following two patches: btrfs: eliminate extra call when doing binary search on extent buffer btrfs: do unsigned integer division in the extent buffer binary search loop The following fs_mark test was run on a non-debug kernel (Debian's default kernel config) before and after applying the patchset: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" FILES=100000 THREADS=$(nproc --all) FILE_SIZE=0 umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT OPTS="-S 0 -L 6 -n $FILES -s $FILE_SIZE -t $THREADS -k" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT Results before applying patchset: FSUse% Count Size Files/sec App Overhead 2 1200000 0 174472.0 11549868 4 2400000 0 253503.0 11694618 4 3600000 0 257833.1 11611508 6 4800000 0 247089.5 11665983 6 6000000 0 211296.1 12121244 10 7200000 0 187330.6 12548565 Results after applying patchset: FSUse% Count Size Files/sec App Overhead 2 1200000 0 207556.0 11393252 4 2400000 0 266751.1 11347909 4 3600000 0 274397.5 11270058 6 4800000 0 259608.4 11442250 6 6000000 0 238895.8 11635921 8 7200000 0 211942.2 11873825 Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-02-08 17:46:49 +00:00
"%s: low (%u) > high (%u) eb %llu owner %llu level %d",
__func__, low, high, eb->start,
btrfs_header_owner(eb), btrfs_header_level(eb));
return -EINVAL;
}
if (btrfs_header_level(eb) == 0) {
p = offsetof(struct btrfs_leaf, items);
item_size = sizeof(struct btrfs_item);
} else {
p = offsetof(struct btrfs_node, ptrs);
item_size = sizeof(struct btrfs_key_ptr);
}
while (low < high) {
const int unit_size = eb->folio_size;
unsigned long oil;
unsigned long offset;
struct btrfs_disk_key *tmp;
struct btrfs_disk_key unaligned;
int mid;
mid = (low + high) / 2;
offset = p + mid * item_size;
oil = get_eb_offset_in_folio(eb, offset);
if (oil + key_size <= unit_size) {
const unsigned long idx = get_eb_folio_index(eb, offset);
char *kaddr = folio_address(eb->folios[idx]);
oil = get_eb_offset_in_folio(eb, offset);
tmp = (struct btrfs_disk_key *)(kaddr + oil);
} else {
read_extent_buffer(eb, &unaligned, offset, key_size);
tmp = &unaligned;
}
ret = btrfs_comp_keys(tmp, key);
if (ret < 0)
low = mid + 1;
else if (ret > 0)
high = mid;
else {
*slot = mid;
return 0;
}
}
*slot = low;
return 1;
}
static void root_add_used_bytes(struct btrfs_root *root)
{
spin_lock(&root->accounting_lock);
btrfs_set_root_used(&root->root_item,
btrfs_root_used(&root->root_item) + root->fs_info->nodesize);
spin_unlock(&root->accounting_lock);
}
static void root_sub_used_bytes(struct btrfs_root *root)
{
spin_lock(&root->accounting_lock);
btrfs_set_root_used(&root->root_item,
btrfs_root_used(&root->root_item) - root->fs_info->nodesize);
spin_unlock(&root->accounting_lock);
}
/* given a node and slot number, this reads the blocks it points to. The
* extent buffer is returned with a reference taken (but unlocked).
*/
struct extent_buffer *btrfs_read_node_slot(struct extent_buffer *parent,
int slot)
{
int level = btrfs_header_level(parent);
struct btrfs_tree_parent_check check = { 0 };
struct extent_buffer *eb;
if (slot < 0 || slot >= btrfs_header_nritems(parent))
return ERR_PTR(-ENOENT);
ASSERT(level);
check.level = level - 1;
check.transid = btrfs_node_ptr_generation(parent, slot);
check.owner_root = btrfs_header_owner(parent);
check.has_first_key = true;
btrfs_node_key_to_cpu(parent, &check.first_key, slot);
eb = read_tree_block(parent->fs_info, btrfs_node_blockptr(parent, slot),
&check);
if (IS_ERR(eb))
return eb;
if (!extent_buffer_uptodate(eb)) {
free_extent_buffer(eb);
return ERR_PTR(-EIO);
}
return eb;
}
/*
* node level balancing, used to make sure nodes are in proper order for
* item deletion. We balance from the top down, so we have to make sure
* that a deletion won't leave an node completely empty later on.
*/
static noinline int balance_level(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, int level)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *right = NULL;
struct extent_buffer *mid;
struct extent_buffer *left = NULL;
struct extent_buffer *parent = NULL;
int ret = 0;
int wret;
int pslot;
int orig_slot = path->slots[level];
u64 orig_ptr;
ASSERT(level > 0);
mid = path->nodes[level];
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
WARN_ON(path->locks[level] != BTRFS_WRITE_LOCK);
WARN_ON(btrfs_header_generation(mid) != trans->transid);
orig_ptr = btrfs_node_blockptr(mid, orig_slot);
if (level < BTRFS_MAX_LEVEL - 1) {
parent = path->nodes[level + 1];
pslot = path->slots[level + 1];
}
/*
* deal with the case where there is only one pointer in the root
* by promoting the node below to a root
*/
if (!parent) {
struct extent_buffer *child;
if (btrfs_header_nritems(mid) != 1)
return 0;
/* promote the child to a root */
child = btrfs_read_node_slot(mid, 0);
if (IS_ERR(child)) {
ret = PTR_ERR(child);
goto out;
}
btrfs_tree_lock(child);
ret = btrfs_cow_block(trans, root, child, mid, 0, &child,
BTRFS_NESTING_COW);
if (ret) {
btrfs_tree_unlock(child);
free_extent_buffer(child);
goto out;
}
ret = btrfs_tree_mod_log_insert_root(root->node, child, true);
if (ret < 0) {
btrfs_tree_unlock(child);
free_extent_buffer(child);
btrfs_abort_transaction(trans, ret);
goto out;
}
rcu_assign_pointer(root->node, child);
add_root_to_dirty_list(root);
btrfs_tree_unlock(child);
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
path->locks[level] = 0;
path->nodes[level] = NULL;
btrfs_clear_buffer_dirty(trans, mid);
btrfs_tree_unlock(mid);
/* once for the path */
free_extent_buffer(mid);
root_sub_used_bytes(root);
btrfs: fix invalid delayed ref after subvolume creation failure When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the new root's root item into the root tree, we are freeing the metadata extent we reserved for the new root to prevent a metadata extent leak, as we don't abort the transaction at that point (since there is nothing at that point that is irreversible). However we allocated the metadata extent for the new root which we are creating for the new subvolume, so its delayed reference refers to the ID of this new root. But when we free the metadata extent we pass the root of the subvolume where the new subvolume is located to btrfs_free_tree_block() - this is incorrect because this will generate a delayed reference that refers to the ID of the parent subvolume's root, and not to ID of the new root. This results in a failure when running delayed references that leads to a transaction abort and a trace like the following: [3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs] [3868.739857] Code: 68 0f 85 e6 fb ff (...) [3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246 [3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002 [3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88 [3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88 [3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000 [3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88 [3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000 [3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0 [3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [3868.757803] Call Trace: [3868.758281] <TASK> [3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs] [3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs] [3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs] [3868.762069] ? lock_acquired+0x19f/0x420 [3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs] [3868.763860] ? _raw_spin_unlock+0x29/0x40 [3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs] [3868.765870] create_subvol+0x1d8/0x9a0 [btrfs] [3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs] [3868.767669] ? preempt_count_add+0x49/0xa0 [3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [3868.769639] ? _copy_from_user+0x66/0xa0 [3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [3868.772364] ? __slab_free+0x10a/0x360 [3868.773198] ? rcu_read_lock_sched_held+0x12/0x60 [3868.774121] ? lock_release+0x223/0x4a0 [3868.774863] ? lock_acquired+0x19f/0x420 [3868.775634] ? rcu_read_lock_sched_held+0x12/0x60 [3868.776530] ? trace_hardirqs_on+0x1b/0xe0 [3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [3868.778280] ? kmem_cache_free+0x321/0x3c0 [3868.779011] ? __x64_sys_ioctl+0x83/0xb0 [3868.779718] __x64_sys_ioctl+0x83/0xb0 [3868.780387] do_syscall_64+0x3b/0xc0 [3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae [3868.781953] RIP: 0033:0x7f281c59e957 [3868.782585] Code: 3c 1c 48 f7 d8 4c (...) [3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957 [3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003 [3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36 [3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc [3868.793765] </TASK> [3868.794037] irq event stamp: 0 [3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0 [3868.799284] ---[ end trace be24c7002fe27747 ]--- [3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2 [3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627 [3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33 [3868.802863] extent refs 1 gen 1265 flags 2 [3868.803447] ref#0: tree block backref root 1610 (...) [3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33 [3869.065421] extent refs 1 gen 1268 flags 2 [3869.066115] ref#0: tree block backref root 1689 (...) [3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0 [3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry [3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry Fix this by passing the new subvolume's root ID to btrfs_free_tree_block(). This requires changing the root argument of btrfs_free_tree_block() from struct btrfs_root * to a u64, since at this point during the subvolume creation we have not yet created the struct btrfs_root for the new subvolume, and btrfs_free_tree_block() only needs a root ID and nothing else from a struct btrfs_root. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-13 08:45:12 +00:00
btrfs_free_tree_block(trans, btrfs_root_id(root), mid, 0, 1);
/* once for the root ptr */
free_extent_buffer_stale(mid);
return 0;
}
if (btrfs_header_nritems(mid) >
BTRFS_NODEPTRS_PER_BLOCK(fs_info) / 4)
return 0;
if (pslot) {
left = btrfs_read_node_slot(parent, pslot - 1);
if (IS_ERR(left)) {
ret = PTR_ERR(left);
left = NULL;
goto out;
}
btrfs_tree_lock_nested(left, BTRFS_NESTING_LEFT);
wret = btrfs_cow_block(trans, root, left,
parent, pslot - 1, &left,
BTRFS_NESTING_LEFT_COW);
if (wret) {
ret = wret;
goto out;
}
}
if (pslot + 1 < btrfs_header_nritems(parent)) {
right = btrfs_read_node_slot(parent, pslot + 1);
if (IS_ERR(right)) {
ret = PTR_ERR(right);
right = NULL;
goto out;
}
btrfs_tree_lock_nested(right, BTRFS_NESTING_RIGHT);
wret = btrfs_cow_block(trans, root, right,
parent, pslot + 1, &right,
BTRFS_NESTING_RIGHT_COW);
if (wret) {
ret = wret;
goto out;
}
}
/* first, try to make some room in the middle buffer */
if (left) {
orig_slot += btrfs_header_nritems(left);
wret = push_node_left(trans, left, mid, 1);
if (wret < 0)
ret = wret;
}
/*
* then try to empty the right most buffer into the middle
*/
if (right) {
wret = push_node_left(trans, mid, right, 1);
if (wret < 0 && wret != -ENOSPC)
ret = wret;
if (btrfs_header_nritems(right) == 0) {
btrfs_clear_buffer_dirty(trans, right);
btrfs_tree_unlock(right);
ret = btrfs_del_ptr(trans, root, path, level + 1, pslot + 1);
if (ret < 0) {
free_extent_buffer_stale(right);
right = NULL;
goto out;
}
root_sub_used_bytes(root);
btrfs: fix invalid delayed ref after subvolume creation failure When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the new root's root item into the root tree, we are freeing the metadata extent we reserved for the new root to prevent a metadata extent leak, as we don't abort the transaction at that point (since there is nothing at that point that is irreversible). However we allocated the metadata extent for the new root which we are creating for the new subvolume, so its delayed reference refers to the ID of this new root. But when we free the metadata extent we pass the root of the subvolume where the new subvolume is located to btrfs_free_tree_block() - this is incorrect because this will generate a delayed reference that refers to the ID of the parent subvolume's root, and not to ID of the new root. This results in a failure when running delayed references that leads to a transaction abort and a trace like the following: [3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs] [3868.739857] Code: 68 0f 85 e6 fb ff (...) [3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246 [3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002 [3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88 [3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88 [3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000 [3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88 [3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000 [3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0 [3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [3868.757803] Call Trace: [3868.758281] <TASK> [3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs] [3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs] [3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs] [3868.762069] ? lock_acquired+0x19f/0x420 [3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs] [3868.763860] ? _raw_spin_unlock+0x29/0x40 [3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs] [3868.765870] create_subvol+0x1d8/0x9a0 [btrfs] [3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs] [3868.767669] ? preempt_count_add+0x49/0xa0 [3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [3868.769639] ? _copy_from_user+0x66/0xa0 [3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [3868.772364] ? __slab_free+0x10a/0x360 [3868.773198] ? rcu_read_lock_sched_held+0x12/0x60 [3868.774121] ? lock_release+0x223/0x4a0 [3868.774863] ? lock_acquired+0x19f/0x420 [3868.775634] ? rcu_read_lock_sched_held+0x12/0x60 [3868.776530] ? trace_hardirqs_on+0x1b/0xe0 [3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [3868.778280] ? kmem_cache_free+0x321/0x3c0 [3868.779011] ? __x64_sys_ioctl+0x83/0xb0 [3868.779718] __x64_sys_ioctl+0x83/0xb0 [3868.780387] do_syscall_64+0x3b/0xc0 [3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae [3868.781953] RIP: 0033:0x7f281c59e957 [3868.782585] Code: 3c 1c 48 f7 d8 4c (...) [3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957 [3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003 [3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36 [3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc [3868.793765] </TASK> [3868.794037] irq event stamp: 0 [3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0 [3868.799284] ---[ end trace be24c7002fe27747 ]--- [3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2 [3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627 [3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33 [3868.802863] extent refs 1 gen 1265 flags 2 [3868.803447] ref#0: tree block backref root 1610 (...) [3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33 [3869.065421] extent refs 1 gen 1268 flags 2 [3869.066115] ref#0: tree block backref root 1689 (...) [3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0 [3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry [3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry Fix this by passing the new subvolume's root ID to btrfs_free_tree_block(). This requires changing the root argument of btrfs_free_tree_block() from struct btrfs_root * to a u64, since at this point during the subvolume creation we have not yet created the struct btrfs_root for the new subvolume, and btrfs_free_tree_block() only needs a root ID and nothing else from a struct btrfs_root. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-13 08:45:12 +00:00
btrfs_free_tree_block(trans, btrfs_root_id(root), right,
0, 1);
free_extent_buffer_stale(right);
right = NULL;
} else {
struct btrfs_disk_key right_key;
btrfs_node_key(right, &right_key, 0);
ret = btrfs_tree_mod_log_insert_key(parent, pslot + 1,
BTRFS_MOD_LOG_KEY_REPLACE);
if (ret < 0) {
btrfs_abort_transaction(trans, ret);
goto out;
}
btrfs_set_node_key(parent, &right_key, pslot + 1);
btrfs_mark_buffer_dirty(trans, parent);
}
}
if (btrfs_header_nritems(mid) == 1) {
/*
* we're not allowed to leave a node with one item in the
* tree during a delete. A deletion from lower in the tree
* could try to delete the only pointer in this node.
* So, pull some keys from the left.
* There has to be a left pointer at this point because
* otherwise we would have pulled some pointers from the
* right
*/
if (unlikely(!left)) {
btrfs_crit(fs_info,
"missing left child when middle child only has 1 item, parent bytenr %llu level %d mid bytenr %llu root %llu",
parent->start, btrfs_header_level(parent),
mid->start, btrfs_root_id(root));
ret = -EUCLEAN;
btrfs_abort_transaction(trans, ret);
goto out;
}
wret = balance_node_right(trans, mid, left);
if (wret < 0) {
ret = wret;
goto out;
}
if (wret == 1) {
wret = push_node_left(trans, left, mid, 1);
if (wret < 0)
ret = wret;
}
BUG_ON(wret == 1);
}
if (btrfs_header_nritems(mid) == 0) {
btrfs_clear_buffer_dirty(trans, mid);
btrfs_tree_unlock(mid);
ret = btrfs_del_ptr(trans, root, path, level + 1, pslot);
if (ret < 0) {
free_extent_buffer_stale(mid);
mid = NULL;
goto out;
}
root_sub_used_bytes(root);
btrfs: fix invalid delayed ref after subvolume creation failure When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the new root's root item into the root tree, we are freeing the metadata extent we reserved for the new root to prevent a metadata extent leak, as we don't abort the transaction at that point (since there is nothing at that point that is irreversible). However we allocated the metadata extent for the new root which we are creating for the new subvolume, so its delayed reference refers to the ID of this new root. But when we free the metadata extent we pass the root of the subvolume where the new subvolume is located to btrfs_free_tree_block() - this is incorrect because this will generate a delayed reference that refers to the ID of the parent subvolume's root, and not to ID of the new root. This results in a failure when running delayed references that leads to a transaction abort and a trace like the following: [3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs] [3868.739857] Code: 68 0f 85 e6 fb ff (...) [3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246 [3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002 [3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88 [3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88 [3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000 [3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88 [3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000 [3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0 [3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [3868.757803] Call Trace: [3868.758281] <TASK> [3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs] [3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs] [3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs] [3868.762069] ? lock_acquired+0x19f/0x420 [3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs] [3868.763860] ? _raw_spin_unlock+0x29/0x40 [3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs] [3868.765870] create_subvol+0x1d8/0x9a0 [btrfs] [3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs] [3868.767669] ? preempt_count_add+0x49/0xa0 [3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [3868.769639] ? _copy_from_user+0x66/0xa0 [3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [3868.772364] ? __slab_free+0x10a/0x360 [3868.773198] ? rcu_read_lock_sched_held+0x12/0x60 [3868.774121] ? lock_release+0x223/0x4a0 [3868.774863] ? lock_acquired+0x19f/0x420 [3868.775634] ? rcu_read_lock_sched_held+0x12/0x60 [3868.776530] ? trace_hardirqs_on+0x1b/0xe0 [3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [3868.778280] ? kmem_cache_free+0x321/0x3c0 [3868.779011] ? __x64_sys_ioctl+0x83/0xb0 [3868.779718] __x64_sys_ioctl+0x83/0xb0 [3868.780387] do_syscall_64+0x3b/0xc0 [3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae [3868.781953] RIP: 0033:0x7f281c59e957 [3868.782585] Code: 3c 1c 48 f7 d8 4c (...) [3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957 [3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003 [3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36 [3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc [3868.793765] </TASK> [3868.794037] irq event stamp: 0 [3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0 [3868.799284] ---[ end trace be24c7002fe27747 ]--- [3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2 [3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627 [3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33 [3868.802863] extent refs 1 gen 1265 flags 2 [3868.803447] ref#0: tree block backref root 1610 (...) [3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33 [3869.065421] extent refs 1 gen 1268 flags 2 [3869.066115] ref#0: tree block backref root 1689 (...) [3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0 [3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry [3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry Fix this by passing the new subvolume's root ID to btrfs_free_tree_block(). This requires changing the root argument of btrfs_free_tree_block() from struct btrfs_root * to a u64, since at this point during the subvolume creation we have not yet created the struct btrfs_root for the new subvolume, and btrfs_free_tree_block() only needs a root ID and nothing else from a struct btrfs_root. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-13 08:45:12 +00:00
btrfs_free_tree_block(trans, btrfs_root_id(root), mid, 0, 1);
free_extent_buffer_stale(mid);
mid = NULL;
} else {
/* update the parent key to reflect our changes */
struct btrfs_disk_key mid_key;
btrfs_node_key(mid, &mid_key, 0);
ret = btrfs_tree_mod_log_insert_key(parent, pslot,
BTRFS_MOD_LOG_KEY_REPLACE);
if (ret < 0) {
btrfs_abort_transaction(trans, ret);
goto out;
}
btrfs_set_node_key(parent, &mid_key, pslot);
btrfs_mark_buffer_dirty(trans, parent);
}
/* update the path */
if (left) {
if (btrfs_header_nritems(left) > orig_slot) {
atomic_inc(&left->refs);
/* left was locked after cow */
path->nodes[level] = left;
path->slots[level + 1] -= 1;
path->slots[level] = orig_slot;
if (mid) {
btrfs_tree_unlock(mid);
free_extent_buffer(mid);
}
} else {
orig_slot -= btrfs_header_nritems(left);
path->slots[level] = orig_slot;
}
}
/* double check we haven't messed things up */
if (orig_ptr !=
btrfs_node_blockptr(path->nodes[level], path->slots[level]))
BUG();
out:
if (right) {
btrfs_tree_unlock(right);
free_extent_buffer(right);
}
if (left) {
if (path->nodes[level] != left)
btrfs_tree_unlock(left);
free_extent_buffer(left);
}
return ret;
}
/* Node balancing for insertion. Here we only split or push nodes around
* when they are completely full. This is also done top down, so we
* have to be pessimistic.
*/
static noinline int push_nodes_for_insert(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, int level)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *right = NULL;
struct extent_buffer *mid;
struct extent_buffer *left = NULL;
struct extent_buffer *parent = NULL;
int ret = 0;
int wret;
int pslot;
int orig_slot = path->slots[level];
if (level == 0)
return 1;
mid = path->nodes[level];
WARN_ON(btrfs_header_generation(mid) != trans->transid);
if (level < BTRFS_MAX_LEVEL - 1) {
parent = path->nodes[level + 1];
pslot = path->slots[level + 1];
}
if (!parent)
return 1;
/* first, try to make some room in the middle buffer */
if (pslot) {
u32 left_nr;
left = btrfs_read_node_slot(parent, pslot - 1);
if (IS_ERR(left))
return PTR_ERR(left);
btrfs_tree_lock_nested(left, BTRFS_NESTING_LEFT);
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
left_nr = btrfs_header_nritems(left);
if (left_nr >= BTRFS_NODEPTRS_PER_BLOCK(fs_info) - 1) {
wret = 1;
} else {
ret = btrfs_cow_block(trans, root, left, parent,
pslot - 1, &left,
BTRFS_NESTING_LEFT_COW);
if (ret)
wret = 1;
else {
wret = push_node_left(trans, left, mid, 0);
}
}
if (wret < 0)
ret = wret;
if (wret == 0) {
struct btrfs_disk_key disk_key;
orig_slot += left_nr;
btrfs_node_key(mid, &disk_key, 0);
ret = btrfs_tree_mod_log_insert_key(parent, pslot,
BTRFS_MOD_LOG_KEY_REPLACE);
if (ret < 0) {
btrfs_tree_unlock(left);
free_extent_buffer(left);
btrfs_abort_transaction(trans, ret);
return ret;
}
btrfs_set_node_key(parent, &disk_key, pslot);
btrfs_mark_buffer_dirty(trans, parent);
if (btrfs_header_nritems(left) > orig_slot) {
path->nodes[level] = left;
path->slots[level + 1] -= 1;
path->slots[level] = orig_slot;
btrfs_tree_unlock(mid);
free_extent_buffer(mid);
} else {
orig_slot -=
btrfs_header_nritems(left);
path->slots[level] = orig_slot;
btrfs_tree_unlock(left);
free_extent_buffer(left);
}
return 0;
}
btrfs_tree_unlock(left);
free_extent_buffer(left);
}
/*
* then try to empty the right most buffer into the middle
*/
if (pslot + 1 < btrfs_header_nritems(parent)) {
u32 right_nr;
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
right = btrfs_read_node_slot(parent, pslot + 1);
if (IS_ERR(right))
return PTR_ERR(right);
btrfs_tree_lock_nested(right, BTRFS_NESTING_RIGHT);
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
right_nr = btrfs_header_nritems(right);
if (right_nr >= BTRFS_NODEPTRS_PER_BLOCK(fs_info) - 1) {
wret = 1;
} else {
ret = btrfs_cow_block(trans, root, right,
parent, pslot + 1,
&right, BTRFS_NESTING_RIGHT_COW);
if (ret)
wret = 1;
else {
wret = balance_node_right(trans, right, mid);
}
}
if (wret < 0)
ret = wret;
if (wret == 0) {
struct btrfs_disk_key disk_key;
btrfs_node_key(right, &disk_key, 0);
ret = btrfs_tree_mod_log_insert_key(parent, pslot + 1,
BTRFS_MOD_LOG_KEY_REPLACE);
if (ret < 0) {
btrfs_tree_unlock(right);
free_extent_buffer(right);
btrfs_abort_transaction(trans, ret);
return ret;
}
btrfs_set_node_key(parent, &disk_key, pslot + 1);
btrfs_mark_buffer_dirty(trans, parent);
if (btrfs_header_nritems(mid) <= orig_slot) {
path->nodes[level] = right;
path->slots[level + 1] += 1;
path->slots[level] = orig_slot -
btrfs_header_nritems(mid);
btrfs_tree_unlock(mid);
free_extent_buffer(mid);
} else {
btrfs_tree_unlock(right);
free_extent_buffer(right);
}
return 0;
}
btrfs_tree_unlock(right);
free_extent_buffer(right);
}
return 1;
}
/*
* readahead one full node of leaves, finding things that are close
* to the block in 'slot', and triggering ra on them.
*/
static void reada_for_search(struct btrfs_fs_info *fs_info,
struct btrfs_path *path,
int level, int slot, u64 objectid)
{
struct extent_buffer *node;
struct btrfs_disk_key disk_key;
u32 nritems;
u64 search;
u64 target;
u64 nread = 0;
btrfs: improve btree readahead for full send operations Currently a full send operation uses the standard btree readahead when iterating over the subvolume/snapshot btree, which despite bringing good performance benefits, it could be improved in a few aspects for use cases such as full send operations, which are guaranteed to visit every node and leaf of a btree, in ascending and sequential order. The limitations of that standard btree readahead implementation are the following: 1) It only triggers readahead for leaves that are physically close to the leaf being read, within a 64K range; 2) It only triggers readahead for the next or previous leaves if the leaf being read is not currently in memory; 3) It never triggers readahead for nodes. So add a new readahead mode that addresses all these points and use it for full send operations. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk and with 16GiB of RAM: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } initial_file_count=500000 add_files $initial_file_count 0 4 echo echo "Creating first snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 echo echo "Adding more files..." add_files $((initial_file_count / 4)) $initial_file_count 4 echo echo "Updating 1/50th of the initial files..." for ((i = 1; i < $initial_file_count; i += 50)); do xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null done echo echo "Creating second snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap2 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT The durations of the full send operation in seconds were the following: Before this change: 217 seconds After this change: 205 seconds (-5.7%) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-31 10:56:21 +00:00
u64 nread_max;
u32 nr;
u32 blocksize;
u32 nscan = 0;
btrfs: improve btree readahead for full send operations Currently a full send operation uses the standard btree readahead when iterating over the subvolume/snapshot btree, which despite bringing good performance benefits, it could be improved in a few aspects for use cases such as full send operations, which are guaranteed to visit every node and leaf of a btree, in ascending and sequential order. The limitations of that standard btree readahead implementation are the following: 1) It only triggers readahead for leaves that are physically close to the leaf being read, within a 64K range; 2) It only triggers readahead for the next or previous leaves if the leaf being read is not currently in memory; 3) It never triggers readahead for nodes. So add a new readahead mode that addresses all these points and use it for full send operations. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk and with 16GiB of RAM: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } initial_file_count=500000 add_files $initial_file_count 0 4 echo echo "Creating first snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 echo echo "Adding more files..." add_files $((initial_file_count / 4)) $initial_file_count 4 echo echo "Updating 1/50th of the initial files..." for ((i = 1; i < $initial_file_count; i += 50)); do xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null done echo echo "Creating second snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap2 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT The durations of the full send operation in seconds were the following: Before this change: 217 seconds After this change: 205 seconds (-5.7%) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-31 10:56:21 +00:00
if (level != 1 && path->reada != READA_FORWARD_ALWAYS)
return;
if (!path->nodes[level])
return;
node = path->nodes[level];
btrfs: improve btree readahead for full send operations Currently a full send operation uses the standard btree readahead when iterating over the subvolume/snapshot btree, which despite bringing good performance benefits, it could be improved in a few aspects for use cases such as full send operations, which are guaranteed to visit every node and leaf of a btree, in ascending and sequential order. The limitations of that standard btree readahead implementation are the following: 1) It only triggers readahead for leaves that are physically close to the leaf being read, within a 64K range; 2) It only triggers readahead for the next or previous leaves if the leaf being read is not currently in memory; 3) It never triggers readahead for nodes. So add a new readahead mode that addresses all these points and use it for full send operations. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk and with 16GiB of RAM: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } initial_file_count=500000 add_files $initial_file_count 0 4 echo echo "Creating first snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 echo echo "Adding more files..." add_files $((initial_file_count / 4)) $initial_file_count 4 echo echo "Updating 1/50th of the initial files..." for ((i = 1; i < $initial_file_count; i += 50)); do xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null done echo echo "Creating second snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap2 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT The durations of the full send operation in seconds were the following: Before this change: 217 seconds After this change: 205 seconds (-5.7%) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-31 10:56:21 +00:00
/*
* Since the time between visiting leaves is much shorter than the time
* between visiting nodes, limit read ahead of nodes to 1, to avoid too
* much IO at once (possibly random).
*/
if (path->reada == READA_FORWARD_ALWAYS) {
if (level > 1)
nread_max = node->fs_info->nodesize;
else
nread_max = SZ_128K;
} else {
nread_max = SZ_64K;
}
search = btrfs_node_blockptr(node, slot);
blocksize = fs_info->nodesize;
btrfs: continue readahead of siblings even if target node is in memory At reada_for_search(), when attempting to readahead a node or leaf's siblings, we skip the readahead of the siblings if the node/leaf is already in memory. That is probably fine for the READA_FORWARD and READA_BACK readahead types, as they are used on contexts where we end up reading some consecutive leaves, but usually not the whole btree. However for a READA_FORWARD_ALWAYS mode, currently only used for full send operations, it does not make sense to skip the readahead if the target node or leaf is already loaded in memory, since we know the caller is visiting every node and leaf of the btree in ascending order. So change the behaviour to not skip the readahead when the target node is already in memory and the readahead mode is READA_FORWARD_ALWAYS. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk, with 32GiB of RAM and using a non-debug kernel config (Debian's default config). $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } file_count=2000000 add_files $file_count 0 4 echo echo "Creating snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT The duration of the full send operations, in seconds, were the following: Before this change: 85 seconds After this change: 76 seconds (-11.2%) Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-20 15:03:03 +00:00
if (path->reada != READA_FORWARD_ALWAYS) {
struct extent_buffer *eb;
eb = find_extent_buffer(fs_info, search);
if (eb) {
free_extent_buffer(eb);
return;
}
}
target = search;
nritems = btrfs_header_nritems(node);
nr = slot;
while (1) {
if (path->reada == READA_BACK) {
if (nr == 0)
break;
nr--;
btrfs: improve btree readahead for full send operations Currently a full send operation uses the standard btree readahead when iterating over the subvolume/snapshot btree, which despite bringing good performance benefits, it could be improved in a few aspects for use cases such as full send operations, which are guaranteed to visit every node and leaf of a btree, in ascending and sequential order. The limitations of that standard btree readahead implementation are the following: 1) It only triggers readahead for leaves that are physically close to the leaf being read, within a 64K range; 2) It only triggers readahead for the next or previous leaves if the leaf being read is not currently in memory; 3) It never triggers readahead for nodes. So add a new readahead mode that addresses all these points and use it for full send operations. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk and with 16GiB of RAM: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } initial_file_count=500000 add_files $initial_file_count 0 4 echo echo "Creating first snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 echo echo "Adding more files..." add_files $((initial_file_count / 4)) $initial_file_count 4 echo echo "Updating 1/50th of the initial files..." for ((i = 1; i < $initial_file_count; i += 50)); do xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null done echo echo "Creating second snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap2 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT The durations of the full send operation in seconds were the following: Before this change: 217 seconds After this change: 205 seconds (-5.7%) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-31 10:56:21 +00:00
} else if (path->reada == READA_FORWARD ||
path->reada == READA_FORWARD_ALWAYS) {
nr++;
if (nr >= nritems)
break;
}
if (path->reada == READA_BACK && objectid) {
btrfs_node_key(node, &disk_key, nr);
if (btrfs_disk_key_objectid(&disk_key) != objectid)
break;
}
search = btrfs_node_blockptr(node, nr);
btrfs: improve btree readahead for full send operations Currently a full send operation uses the standard btree readahead when iterating over the subvolume/snapshot btree, which despite bringing good performance benefits, it could be improved in a few aspects for use cases such as full send operations, which are guaranteed to visit every node and leaf of a btree, in ascending and sequential order. The limitations of that standard btree readahead implementation are the following: 1) It only triggers readahead for leaves that are physically close to the leaf being read, within a 64K range; 2) It only triggers readahead for the next or previous leaves if the leaf being read is not currently in memory; 3) It never triggers readahead for nodes. So add a new readahead mode that addresses all these points and use it for full send operations. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk and with 16GiB of RAM: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } initial_file_count=500000 add_files $initial_file_count 0 4 echo echo "Creating first snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 echo echo "Adding more files..." add_files $((initial_file_count / 4)) $initial_file_count 4 echo echo "Updating 1/50th of the initial files..." for ((i = 1; i < $initial_file_count; i += 50)); do xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null done echo echo "Creating second snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap2 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT The durations of the full send operation in seconds were the following: Before this change: 217 seconds After this change: 205 seconds (-5.7%) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-31 10:56:21 +00:00
if (path->reada == READA_FORWARD_ALWAYS ||
(search <= target && target - search <= 65536) ||
(search > target && search - target <= 65536)) {
btrfs_readahead_node_child(node, nr);
nread += blocksize;
}
nscan++;
btrfs: improve btree readahead for full send operations Currently a full send operation uses the standard btree readahead when iterating over the subvolume/snapshot btree, which despite bringing good performance benefits, it could be improved in a few aspects for use cases such as full send operations, which are guaranteed to visit every node and leaf of a btree, in ascending and sequential order. The limitations of that standard btree readahead implementation are the following: 1) It only triggers readahead for leaves that are physically close to the leaf being read, within a 64K range; 2) It only triggers readahead for the next or previous leaves if the leaf being read is not currently in memory; 3) It never triggers readahead for nodes. So add a new readahead mode that addresses all these points and use it for full send operations. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk and with 16GiB of RAM: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } initial_file_count=500000 add_files $initial_file_count 0 4 echo echo "Creating first snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 echo echo "Adding more files..." add_files $((initial_file_count / 4)) $initial_file_count 4 echo echo "Updating 1/50th of the initial files..." for ((i = 1; i < $initial_file_count; i += 50)); do xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null done echo echo "Creating second snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap2 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT The durations of the full send operation in seconds were the following: Before this change: 217 seconds After this change: 205 seconds (-5.7%) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-31 10:56:21 +00:00
if (nread > nread_max || nscan > 32)
break;
}
}
static noinline void reada_for_balance(struct btrfs_path *path, int level)
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
{
struct extent_buffer *parent;
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
int slot;
int nritems;
parent = path->nodes[level + 1];
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
if (!parent)
return;
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
nritems = btrfs_header_nritems(parent);
slot = path->slots[level + 1];
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
if (slot > 0)
btrfs_readahead_node_child(parent, slot - 1);
if (slot + 1 < nritems)
btrfs_readahead_node_child(parent, slot + 1);
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
}
/*
* when we walk down the tree, it is usually safe to unlock the higher layers
* in the tree. The exceptions are when our path goes through slot 0, because
* operations on the tree might require changing key pointers higher up in the
* tree.
*
* callers might also have set path->keep_locks, which tells this code to keep
* the lock if the path points to the last slot in the block. This is part of
* walking through the tree, and selecting the next slot in the higher block.
*
* lowest_unlock sets the lowest level in the tree we're allowed to unlock. so
* if lowest_unlock is 1, level 0 won't be unlocked
*/
static noinline void unlock_up(struct btrfs_path *path, int level,
int lowest_unlock, int min_write_lock_level,
int *write_lock_level)
{
int i;
int skip_level = level;
bool check_skip = true;
for (i = level; i < BTRFS_MAX_LEVEL; i++) {
if (!path->nodes[i])
break;
if (!path->locks[i])
break;
if (check_skip) {
if (path->slots[i] == 0) {
skip_level = i + 1;
continue;
}
if (path->keep_locks) {
u32 nritems;
nritems = btrfs_header_nritems(path->nodes[i]);
if (nritems < 1 || path->slots[i] >= nritems - 1) {
skip_level = i + 1;
continue;
}
}
}
if (i >= lowest_unlock && i > skip_level) {
check_skip = false;
btrfs_tree_unlock_rw(path->nodes[i], path->locks[i]);
path->locks[i] = 0;
if (write_lock_level &&
i > min_write_lock_level &&
i <= *write_lock_level) {
*write_lock_level = i - 1;
}
}
}
}
/*
* Helper function for btrfs_search_slot() and other functions that do a search
* on a btree. The goal is to find a tree block in the cache (the radix tree at
* fs_info->buffer_radix), but if we can't find it, or it's not up to date, read
* its pages from disk.
*
* Returns -EAGAIN, with the path unlocked, if the caller needs to repeat the
* whole btree search, starting again from the current root node.
*/
static int
read_block_for_search(struct btrfs_root *root, struct btrfs_path *p,
struct extent_buffer **eb_ret, int level, int slot,
const struct btrfs_key *key)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_tree_parent_check check = { 0 };
u64 blocknr;
u64 gen;
struct extent_buffer *tmp;
int ret;
int parent_level;
bool unlock_up;
unlock_up = ((level + 1 < BTRFS_MAX_LEVEL) && p->locks[level + 1]);
blocknr = btrfs_node_blockptr(*eb_ret, slot);
gen = btrfs_node_ptr_generation(*eb_ret, slot);
parent_level = btrfs_header_level(*eb_ret);
btrfs_node_key_to_cpu(*eb_ret, &check.first_key, slot);
check.has_first_key = true;
check.level = parent_level - 1;
check.transid = gen;
check.owner_root = root->root_key.objectid;
/*
* If we need to read an extent buffer from disk and we are holding locks
* on upper level nodes, we unlock all the upper nodes before reading the
* extent buffer, and then return -EAGAIN to the caller as it needs to
* restart the search. We don't release the lock on the current level
* because we need to walk this node to figure out which blocks to read.
*/
tmp = find_extent_buffer(fs_info, blocknr);
if (tmp) {
btrfs: improve btree readahead for full send operations Currently a full send operation uses the standard btree readahead when iterating over the subvolume/snapshot btree, which despite bringing good performance benefits, it could be improved in a few aspects for use cases such as full send operations, which are guaranteed to visit every node and leaf of a btree, in ascending and sequential order. The limitations of that standard btree readahead implementation are the following: 1) It only triggers readahead for leaves that are physically close to the leaf being read, within a 64K range; 2) It only triggers readahead for the next or previous leaves if the leaf being read is not currently in memory; 3) It never triggers readahead for nodes. So add a new readahead mode that addresses all these points and use it for full send operations. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk and with 16GiB of RAM: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } initial_file_count=500000 add_files $initial_file_count 0 4 echo echo "Creating first snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 echo echo "Adding more files..." add_files $((initial_file_count / 4)) $initial_file_count 4 echo echo "Updating 1/50th of the initial files..." for ((i = 1; i < $initial_file_count; i += 50)); do xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null done echo echo "Creating second snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap2 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT The durations of the full send operation in seconds were the following: Before this change: 217 seconds After this change: 205 seconds (-5.7%) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-31 10:56:21 +00:00
if (p->reada == READA_FORWARD_ALWAYS)
reada_for_search(fs_info, p, level, slot, key->objectid);
/* first we do an atomic uptodate check */
if (btrfs_buffer_uptodate(tmp, gen, 1) > 0) {
btrfs: Check the first key and level for cached extent buffer [BUG] When reading a file from a fuzzed image, kernel can panic like: BTRFS warning (device loop0): csum failed root 5 ino 270 off 0 csum 0x98f94189 expected csum 0x00000000 mirror 1 assertion failed: !memcmp_extent_buffer(b, &disk_key, offsetof(struct btrfs_leaf, items[0].key), sizeof(disk_key)), file: fs/btrfs/ctree.c, line: 2544 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.h:3500! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:btrfs_search_slot.cold.24+0x61/0x63 [btrfs] Call Trace: btrfs_lookup_csum+0x52/0x150 [btrfs] __btrfs_lookup_bio_sums+0x209/0x640 [btrfs] btrfs_submit_bio_hook+0x103/0x170 [btrfs] submit_one_bio+0x59/0x80 [btrfs] extent_read_full_page+0x58/0x80 [btrfs] generic_file_read_iter+0x2f6/0x9d0 __vfs_read+0x14d/0x1a0 vfs_read+0x8d/0x140 ksys_read+0x52/0xc0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe [CAUSE] The fuzzed image has a corrupted leaf whose first key doesn't match its parent: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6 chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c ... key (EXTENT_CSUM EXTENT_CSUM 79691776) block 29761536 gen 19 leaf 29761536 items 1 free space 1726 generation 19 owner CSUM_TREE leaf 29761536 flags 0x1(WRITTEN) backref revision 1 fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6 chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c item 0 key (EXTENT_CSUM EXTENT_CSUM 8798638964736) itemoff 1751 itemsize 2244 range start 8798638964736 end 8798641262592 length 2297856 When reading the above tree block, we have extent_buffer->refs = 2 in the context: - initial one from __alloc_extent_buffer() alloc_extent_buffer() |- __alloc_extent_buffer() |- atomic_set(&eb->refs, 1) - one being added to fs_info->buffer_radix alloc_extent_buffer() |- check_buffer_tree_ref() |- atomic_inc(&eb->refs) So if even we call free_extent_buffer() in read_tree_block or other similar situation, we only decrease the refs by 1, it doesn't reach 0 and won't be freed right now. The staled eb and its corrupted content will still be kept cached. Furthermore, we have several extra cases where we either don't do first key check or the check is not proper for all callers: - scrub We just don't have first key in this context. - shared tree block One tree block can be shared by several snapshot/subvolume trees. In that case, the first key check for one subvolume doesn't apply to another. So for the above reasons, a corrupted extent buffer can sneak into the buffer cache. [FIX] Call verify_level_key in read_block_for_search to do another verification. For that purpose the function is exported. Due to above reasons, although we can free corrupted extent buffer from cache, we still need the check in read_block_for_search(), for scrub and shared tree blocks. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202755 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202757 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202759 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202761 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202767 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202769 Reported-by: Yoon Jungyeon <jungyeon@gatech.edu> CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-12 09:10:40 +00:00
/*
* Do extra check for first_key, eb can be stale due to
* being cached, read from scrub, or have multiple
* parents (shared tree blocks).
*/
if (btrfs_verify_level_key(tmp,
parent_level - 1, &check.first_key, gen)) {
btrfs: Check the first key and level for cached extent buffer [BUG] When reading a file from a fuzzed image, kernel can panic like: BTRFS warning (device loop0): csum failed root 5 ino 270 off 0 csum 0x98f94189 expected csum 0x00000000 mirror 1 assertion failed: !memcmp_extent_buffer(b, &disk_key, offsetof(struct btrfs_leaf, items[0].key), sizeof(disk_key)), file: fs/btrfs/ctree.c, line: 2544 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.h:3500! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:btrfs_search_slot.cold.24+0x61/0x63 [btrfs] Call Trace: btrfs_lookup_csum+0x52/0x150 [btrfs] __btrfs_lookup_bio_sums+0x209/0x640 [btrfs] btrfs_submit_bio_hook+0x103/0x170 [btrfs] submit_one_bio+0x59/0x80 [btrfs] extent_read_full_page+0x58/0x80 [btrfs] generic_file_read_iter+0x2f6/0x9d0 __vfs_read+0x14d/0x1a0 vfs_read+0x8d/0x140 ksys_read+0x52/0xc0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe [CAUSE] The fuzzed image has a corrupted leaf whose first key doesn't match its parent: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6 chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c ... key (EXTENT_CSUM EXTENT_CSUM 79691776) block 29761536 gen 19 leaf 29761536 items 1 free space 1726 generation 19 owner CSUM_TREE leaf 29761536 flags 0x1(WRITTEN) backref revision 1 fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6 chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c item 0 key (EXTENT_CSUM EXTENT_CSUM 8798638964736) itemoff 1751 itemsize 2244 range start 8798638964736 end 8798641262592 length 2297856 When reading the above tree block, we have extent_buffer->refs = 2 in the context: - initial one from __alloc_extent_buffer() alloc_extent_buffer() |- __alloc_extent_buffer() |- atomic_set(&eb->refs, 1) - one being added to fs_info->buffer_radix alloc_extent_buffer() |- check_buffer_tree_ref() |- atomic_inc(&eb->refs) So if even we call free_extent_buffer() in read_tree_block or other similar situation, we only decrease the refs by 1, it doesn't reach 0 and won't be freed right now. The staled eb and its corrupted content will still be kept cached. Furthermore, we have several extra cases where we either don't do first key check or the check is not proper for all callers: - scrub We just don't have first key in this context. - shared tree block One tree block can be shared by several snapshot/subvolume trees. In that case, the first key check for one subvolume doesn't apply to another. So for the above reasons, a corrupted extent buffer can sneak into the buffer cache. [FIX] Call verify_level_key in read_block_for_search to do another verification. For that purpose the function is exported. Due to above reasons, although we can free corrupted extent buffer from cache, we still need the check in read_block_for_search(), for scrub and shared tree blocks. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202755 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202757 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202759 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202761 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202767 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202769 Reported-by: Yoon Jungyeon <jungyeon@gatech.edu> CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-12 09:10:40 +00:00
free_extent_buffer(tmp);
return -EUCLEAN;
}
*eb_ret = tmp;
return 0;
}
if (p->nowait) {
free_extent_buffer(tmp);
return -EAGAIN;
}
if (unlock_up)
btrfs_unlock_up_safe(p, level + 1);
/* now we're allowed to do a blocking uptodate check */
ret = btrfs_read_extent_buffer(tmp, &check);
if (ret) {
free_extent_buffer(tmp);
btrfs_release_path(p);
return -EIO;
}
btrfs: tree-checker: check extent buffer owner against owner rootid Btrfs doesn't check whether the tree block respects the root owner. This means, if a tree block referred by a parent in extent tree, but has owner of 5, btrfs can still continue reading the tree block, as long as it doesn't trigger other sanity checks. Normally this is fine, but combined with the empty tree check in check_leaf(), if we hit an empty extent tree, but the root node has csum tree owner, we can let such extent buffer to sneak in. Shrink the hole by: - Do extra eb owner check at tree read time - Make sure the root owner extent buffer exactly matches the root id. Unfortunately we can't yet completely patch the hole, there are several call sites can't pass all info we need: - For reloc/log trees Their owner is key::offset, not key::objectid. We need the full root key to do that accurate check. For now, we just skip the ownership check for those trees. - For add_data_references() of relocation That call site doesn't have any parent/ownership info, as all the bytenrs are all from btrfs_find_all_leafs(). - For direct backref items walk Direct backref items records the parent bytenr directly, thus unlike indirect backref item, we don't do a full tree search. Thus in that case, we don't have full parent owner to check. For the later two cases, they all pass 0 as @owner_root, thus we can skip those cases if @owner_root is 0. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-16 00:05:58 +00:00
if (btrfs_check_eb_owner(tmp, root->root_key.objectid)) {
free_extent_buffer(tmp);
btrfs_release_path(p);
return -EUCLEAN;
}
if (unlock_up)
ret = -EAGAIN;
goto out;
} else if (p->nowait) {
return -EAGAIN;
}
if (unlock_up) {
btrfs: avoid unnecessary btree search restarts when reading node When reading a btree node, at read_block_for_search(), if we don't find the node's (or leaf) extent buffer in the cache, we will read it from disk. Since that requires waiting on IO, we release all upper level nodes from our path before reading the target node/leaf, and then return -EAGAIN to the caller, which will make the caller restart the while btree search. However we are causing the restart of btree search even for cases where it is not necessary: 1) We have a path with ->skip_locking set to true, typically when doing a search on a commit root, so we are never holding locks on any node; 2) We are doing a read search (the "ins_len" argument passed to btrfs_search_slot() is 0), or we are doing a search to modify an existing key (the "cow" argument passed to btrfs_search_slot() has a value of 1 and "ins_len" is 0), in which case we never hold locks for upper level nodes; 3) We are doing a search to insert or delete a key, in which case we may or may not have upper level nodes locked. That depends on the current minimum write lock levels at btrfs_search_slot(), if we had to split or merge parent nodes, if we had to COW upper level nodes and if we ever visited slot 0 of an upper level node. It's still common to not have upper level nodes locked, but our current node must be at least at level 1, for insertions, or at least at level 2 for deletions. In these cases when we have locks on upper level nodes, they are always write locks. These cases where we are not holding locks on upper level nodes far outweigh the cases where we are holding locks, so it's completely wasteful to retry the whole search when we have no upper nodes locked. So change the logic to not return -EAGAIN, and make the caller retry the search, when we don't have the parent node locked - when it's not locked it means no other upper level nodes are locked as well. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-11 11:35:31 +00:00
btrfs_unlock_up_safe(p, level + 1);
ret = -EAGAIN;
} else {
ret = 0;
}
if (p->reada != READA_NONE)
reada_for_search(fs_info, p, level, slot, key->objectid);
tmp = read_tree_block(fs_info, blocknr, &check);
if (IS_ERR(tmp)) {
btrfs_release_path(p);
return PTR_ERR(tmp);
}
/*
* If the read above didn't mark this buffer up to date,
* it will never end up being up to date. Set ret to EIO now
* and give up so that our caller doesn't loop forever
* on our EAGAINs.
*/
if (!extent_buffer_uptodate(tmp))
ret = -EIO;
btrfs: fix reading stale metadata blocks after degraded raid1 mounts If a btree block, aka. extent buffer, is not available in the extent buffer cache, it'll be read out from the disk instead, i.e. btrfs_search_slot() read_block_for_search() # hold parent and its lock, go to read child btrfs_release_path() read_tree_block() # read child Unfortunately, the parent lock got released before reading child, so commit 5bdd3536cbbe ("Btrfs: Fix block generation verification race") had used 0 as parent transid to read the child block. It forces read_tree_block() not to check if parent transid is different with the generation id of the child that it reads out from disk. A simple PoC is included in btrfs/124, 0. A two-disk raid1 btrfs, 1. Right after mkfs.btrfs, block A is allocated to be device tree's root. 2. Mount this filesystem and put it in use, after a while, device tree's root got COW but block A hasn't been allocated/overwritten yet. 3. Umount it and reload the btrfs module to remove both disks from the global @fs_devices list. 4. mount -odegraded dev1 and write some data, so now block A is allocated to be a leaf in checksum tree. Note that only dev1 has the latest metadata of this filesystem. 5. Umount it and mount it again normally (with both disks), since raid1 can pick up one disk by the writer task's pid, if btrfs_search_slot() needs to read block A, dev2 which does NOT have the latest metadata might be read for block A, then we got a stale block A. 6. As parent transid is not checked, block A is marked as uptodate and put into the extent buffer cache, so the future search won't bother to read disk again, which means it'll make changes on this stale one and make it dirty and flush it onto disk. To avoid the problem, parent transid needs to be passed to read_tree_block(). In order to get a valid parent transid, we need to hold the parent's lock until finishing reading child. This patch needs to be slightly adapted for stable kernels, the &first_key parameter added to read_tree_block() is from 4.16+ (581c1760415c4). The fix is to replace 0 by 'gen'. Fixes: 5bdd3536cbbe ("Btrfs: Fix block generation verification race") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-05-15 17:37:36 +00:00
out:
btrfs: avoid unnecessary btree search restarts when reading node When reading a btree node, at read_block_for_search(), if we don't find the node's (or leaf) extent buffer in the cache, we will read it from disk. Since that requires waiting on IO, we release all upper level nodes from our path before reading the target node/leaf, and then return -EAGAIN to the caller, which will make the caller restart the while btree search. However we are causing the restart of btree search even for cases where it is not necessary: 1) We have a path with ->skip_locking set to true, typically when doing a search on a commit root, so we are never holding locks on any node; 2) We are doing a read search (the "ins_len" argument passed to btrfs_search_slot() is 0), or we are doing a search to modify an existing key (the "cow" argument passed to btrfs_search_slot() has a value of 1 and "ins_len" is 0), in which case we never hold locks for upper level nodes; 3) We are doing a search to insert or delete a key, in which case we may or may not have upper level nodes locked. That depends on the current minimum write lock levels at btrfs_search_slot(), if we had to split or merge parent nodes, if we had to COW upper level nodes and if we ever visited slot 0 of an upper level node. It's still common to not have upper level nodes locked, but our current node must be at least at level 1, for insertions, or at least at level 2 for deletions. In these cases when we have locks on upper level nodes, they are always write locks. These cases where we are not holding locks on upper level nodes far outweigh the cases where we are holding locks, so it's completely wasteful to retry the whole search when we have no upper nodes locked. So change the logic to not return -EAGAIN, and make the caller retry the search, when we don't have the parent node locked - when it's not locked it means no other upper level nodes are locked as well. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-11 11:35:31 +00:00
if (ret == 0) {
*eb_ret = tmp;
} else {
free_extent_buffer(tmp);
btrfs_release_path(p);
}
return ret;
}
/*
* helper function for btrfs_search_slot. This does all of the checks
* for node-level blocks and does any balancing required based on
* the ins_len.
*
* If no extra work was required, zero is returned. If we had to
* drop the path, -EAGAIN is returned and btrfs_search_slot must
* start over
*/
static int
setup_nodes_for_search(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_path *p,
struct extent_buffer *b, int level, int ins_len,
int *write_lock_level)
{
struct btrfs_fs_info *fs_info = root->fs_info;
int ret = 0;
if ((p->search_for_split || ins_len > 0) && btrfs_header_nritems(b) >=
BTRFS_NODEPTRS_PER_BLOCK(fs_info) - 3) {
if (*write_lock_level < level + 1) {
*write_lock_level = level + 1;
btrfs_release_path(p);
return -EAGAIN;
}
reada_for_balance(p, level);
ret = split_node(trans, root, p, level);
b = p->nodes[level];
} else if (ins_len < 0 && btrfs_header_nritems(b) <
BTRFS_NODEPTRS_PER_BLOCK(fs_info) / 2) {
if (*write_lock_level < level + 1) {
*write_lock_level = level + 1;
btrfs_release_path(p);
return -EAGAIN;
}
reada_for_balance(p, level);
ret = balance_level(trans, root, p, level);
if (ret)
return ret;
b = p->nodes[level];
if (!b) {
btrfs_release_path(p);
return -EAGAIN;
}
BUG_ON(btrfs_header_nritems(b) == 1);
}
return ret;
}
int btrfs_find_item(struct btrfs_root *fs_root, struct btrfs_path *path,
u64 iobjectid, u64 ioff, u8 key_type,
struct btrfs_key *found_key)
{
int ret;
struct btrfs_key key;
struct extent_buffer *eb;
ASSERT(path);
ASSERT(found_key);
key.type = key_type;
key.objectid = iobjectid;
key.offset = ioff;
ret = btrfs_search_slot(NULL, fs_root, &key, path, 0, 0);
if (ret < 0)
return ret;
eb = path->nodes[0];
if (ret && path->slots[0] >= btrfs_header_nritems(eb)) {
ret = btrfs_next_leaf(fs_root, path);
if (ret)
return ret;
eb = path->nodes[0];
}
btrfs_item_key_to_cpu(eb, found_key, path->slots[0]);
if (found_key->type != key.type ||
found_key->objectid != key.objectid)
return 1;
return 0;
}
static struct extent_buffer *btrfs_search_slot_get_root(struct btrfs_root *root,
struct btrfs_path *p,
int write_lock_level)
{
struct extent_buffer *b;
int root_lock = 0;
int level = 0;
if (p->search_commit_root) {
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
b = root->commit_root;
atomic_inc(&b->refs);
Btrfs: send, fix race with transaction commits that create snapshots If we create a snapshot of a snapshot currently being used by a send operation, we can end up with send failing unexpectedly (returning -ENOENT error to user space for example). The following diagram shows how this happens. CPU 1 CPU2 CPU3 btrfs_ioctl_send() (...) create_snapshot() -> creates snapshot of a root used by the send task btrfs_commit_transaction() create_pending_snapshot() __get_inode_info() btrfs_search_slot() btrfs_search_slot_get_root() down_read commit_root_sem get reference on eb of the commit root -> eb with bytenr == X up_read commit_root_sem btrfs_cow_block(root node) btrfs_free_tree_block() -> creates delayed ref to free the extent btrfs_run_delayed_refs() -> runs the delayed ref, adds extent to fs_info->pinned_extents btrfs_finish_extent_commit() unpin_extent_range() -> marks extent as free in the free space cache transaction commit finishes btrfs_start_transaction() (...) btrfs_cow_block() btrfs_alloc_tree_block() btrfs_reserve_extent() -> allocates extent at bytenr == X btrfs_init_new_buffer(bytenr X) btrfs_find_create_tree_block() alloc_extent_buffer(bytenr X) find_extent_buffer(bytenr X) -> returns existing eb, which the send task got (...) -> modifies content of the eb with bytenr == X -> uses an eb that now belongs to some other tree and no more matches the commit root of the snapshot, resuts will be unpredictable The consequences of this race can be various, and can lead to searches in the commit root performed by the send task failing unexpectedly (unable to find inode items, returning -ENOENT to user space, for example) or not failing because an inode item with the same number was added to the tree that reused the metadata extent, in which case send can behave incorrectly in the worst case or just fail later for some reason. Fix this by performing a copy of the commit root's extent buffer when doing a search in the context of a send operation. CC: stable@vger.kernel.org # 4.4.x: 1fc28d8e2e9: Btrfs: move get root out of btrfs_search_slot to a helper CC: stable@vger.kernel.org # 4.4.x: f9ddfd0592a: Btrfs: remove unused check of skip_locking CC: stable@vger.kernel.org # 4.4.x Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-11 10:19:45 +00:00
level = btrfs_header_level(b);
/*
* Ensure that all callers have set skip_locking when
* p->search_commit_root = 1.
*/
ASSERT(p->skip_locking == 1);
goto out;
}
if (p->skip_locking) {
b = btrfs_root_node(root);
level = btrfs_header_level(b);
goto out;
}
/* We try very hard to do read locks on the root */
root_lock = BTRFS_READ_LOCK;
/*
* If the level is set to maximum, we can skip trying to get the read
* lock.
*/
if (write_lock_level < BTRFS_MAX_LEVEL) {
/*
* We don't know the level of the root node until we actually
* have it read locked
*/
if (p->nowait) {
b = btrfs_try_read_lock_root_node(root);
if (IS_ERR(b))
return b;
} else {
b = btrfs_read_lock_root_node(root);
}
level = btrfs_header_level(b);
if (level > write_lock_level)
goto out;
/* Whoops, must trade for write lock */
btrfs_tree_read_unlock(b);
free_extent_buffer(b);
}
b = btrfs_lock_root_node(root);
root_lock = BTRFS_WRITE_LOCK;
/* The level might have changed, check again */
level = btrfs_header_level(b);
out:
/*
* The root may have failed to write out at some point, and thus is no
* longer valid, return an error in this case.
*/
if (!extent_buffer_uptodate(b)) {
if (root_lock)
btrfs_tree_unlock_rw(b, root_lock);
free_extent_buffer(b);
return ERR_PTR(-EIO);
}
p->nodes[level] = b;
if (!p->skip_locking)
p->locks[level] = root_lock;
/*
* Callers are responsible for dropping b's references.
*/
return b;
}
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
/*
* Replace the extent buffer at the lowest level of the path with a cloned
* version. The purpose is to be able to use it safely, after releasing the
* commit root semaphore, even if relocation is happening in parallel, the
* transaction used for relocation is committed and the extent buffer is
* reallocated in the next transaction.
*
* This is used in a context where the caller does not prevent transaction
* commits from happening, either by holding a transaction handle or holding
* some lock, while it's doing searches through a commit root.
* At the moment it's only used for send operations.
*/
static int finish_need_commit_sem_search(struct btrfs_path *path)
{
const int i = path->lowest_level;
const int slot = path->slots[i];
struct extent_buffer *lowest = path->nodes[i];
struct extent_buffer *clone;
ASSERT(path->need_commit_sem);
if (!lowest)
return 0;
lockdep_assert_held_read(&lowest->fs_info->commit_root_sem);
clone = btrfs_clone_extent_buffer(lowest);
if (!clone)
return -ENOMEM;
btrfs_release_path(path);
path->nodes[i] = clone;
path->slots[i] = slot;
return 0;
}
btrfs: try to unlock parent nodes earlier when inserting a key When inserting a new key, we release the write lock on the leaf's parent only after doing the binary search on the leaf. This is because if the key ends up at slot 0, we will have to update the key at slot 0 of the parent node. The same reasoning applies to any other upper level nodes when their slot is 0. We also need to keep the parent locked in case the leaf does not have enough free space to insert the new key/item, because in that case we will split the leaf and we will need to add a new key to the parent due to a new leaf resulting from the split operation. However if the leaf has enough space for the new key and the key does not end up at slot 0 of the leaf we could release our write lock on the parent before doing the binary search on the leaf to figure out the destination slot. That leads to reducing the amount of time other tasks are blocked waiting to lock the parent, therefore increasing parallelism when there are other tasks that are trying to access other leaves accessible through the same parent. This also applies to other upper nodes besides the immediate parent, when their slot is 0, since we keep locks on them until we figure out if the leaf slot is slot 0 or not. In fact, having the key ending at up slot 0 when is rare. Typically it only happens when the key is less than or equals to the smallest, the "left most", key of the entire btree, during a split attempt when we try to push to the right sibling leaf or when the caller just wants to update the item of an existing key. It's also very common that a leaf has enough space to insert a new key, since after a split we move about half of the keys from one into the new leaf. So unlock the parent, and any other upper level nodes, when during a key insertion we notice the key is greater then the first key in the leaf and the leaf has enough free space. After unlocking the upper level nodes, do the binary search using a low boundary of slot 1 and not slot 0, to figure out the slot where the key will be inserted (or where the key already is in case it exists and the caller wants to modify its item data). This extra comparison, with the first key, is cheap and the key is very likely already in a cache line because it immediately follows the header of the extent buffer and we have recently read the level field of the header (which in fact is the last field of the header). The following fs_mark test was run on a non-debug kernel (debian's default kernel config), with a 12 cores intel CPU, and using a NVMe device: $ cat run-fsmark.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" FILES=100000 THREADS=$(nproc --all) FILE_SIZE=0 echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT OPTS="-S 0 -L 10 -n $FILES -s $FILE_SIZE -t $THREADS -k" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT Before this change: FSUse% Count Size Files/sec App Overhead 0 1200000 0 165273.6 5958381 0 2400000 0 190938.3 6284477 0 3600000 0 181429.1 6044059 0 4800000 0 173979.2 6223418 0 6000000 0 139288.0 6384560 0 7200000 0 163000.4 6520083 1 8400000 0 57799.2 5388544 1 9600000 0 66461.6 5552969 2 10800000 0 49593.5 5163675 2 12000000 0 57672.1 4889398 After this change: FSUse% Count Size Files/sec App Overhead 0 1200000 0 167987.3 (+1.6%) 6272730 0 2400000 0 198563.9 (+4.0%) 6048847 0 3600000 0 197436.6 (+8.8%) 6163637 0 4800000 0 202880.7 (+16.6%) 6371771 1 6000000 0 167275.9 (+20.1%) 6556733 1 7200000 0 204051.2 (+25.2%) 6817091 1 8400000 0 69622.8 (+20.5%) 5525675 1 9600000 0 69384.5 (+4.4%) 5700723 1 10800000 0 61454.1 (+23.9%) 5363754 3 12000000 0 61908.7 (+7.3%) 5370196 Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-02 10:30:36 +00:00
static inline int search_for_key_slot(struct extent_buffer *eb,
int search_low_slot,
const struct btrfs_key *key,
int prev_cmp,
int *slot)
{
/*
* If a previous call to btrfs_bin_search() on a parent node returned an
* exact match (prev_cmp == 0), we can safely assume the target key will
* always be at slot 0 on lower levels, since each key pointer
* (struct btrfs_key_ptr) refers to the lowest key accessible from the
* subtree it points to. Thus we can skip searching lower levels.
*/
if (prev_cmp == 0) {
*slot = 0;
return 0;
}
return btrfs_bin_search(eb, search_low_slot, key, slot);
btrfs: try to unlock parent nodes earlier when inserting a key When inserting a new key, we release the write lock on the leaf's parent only after doing the binary search on the leaf. This is because if the key ends up at slot 0, we will have to update the key at slot 0 of the parent node. The same reasoning applies to any other upper level nodes when their slot is 0. We also need to keep the parent locked in case the leaf does not have enough free space to insert the new key/item, because in that case we will split the leaf and we will need to add a new key to the parent due to a new leaf resulting from the split operation. However if the leaf has enough space for the new key and the key does not end up at slot 0 of the leaf we could release our write lock on the parent before doing the binary search on the leaf to figure out the destination slot. That leads to reducing the amount of time other tasks are blocked waiting to lock the parent, therefore increasing parallelism when there are other tasks that are trying to access other leaves accessible through the same parent. This also applies to other upper nodes besides the immediate parent, when their slot is 0, since we keep locks on them until we figure out if the leaf slot is slot 0 or not. In fact, having the key ending at up slot 0 when is rare. Typically it only happens when the key is less than or equals to the smallest, the "left most", key of the entire btree, during a split attempt when we try to push to the right sibling leaf or when the caller just wants to update the item of an existing key. It's also very common that a leaf has enough space to insert a new key, since after a split we move about half of the keys from one into the new leaf. So unlock the parent, and any other upper level nodes, when during a key insertion we notice the key is greater then the first key in the leaf and the leaf has enough free space. After unlocking the upper level nodes, do the binary search using a low boundary of slot 1 and not slot 0, to figure out the slot where the key will be inserted (or where the key already is in case it exists and the caller wants to modify its item data). This extra comparison, with the first key, is cheap and the key is very likely already in a cache line because it immediately follows the header of the extent buffer and we have recently read the level field of the header (which in fact is the last field of the header). The following fs_mark test was run on a non-debug kernel (debian's default kernel config), with a 12 cores intel CPU, and using a NVMe device: $ cat run-fsmark.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" FILES=100000 THREADS=$(nproc --all) FILE_SIZE=0 echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT OPTS="-S 0 -L 10 -n $FILES -s $FILE_SIZE -t $THREADS -k" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT Before this change: FSUse% Count Size Files/sec App Overhead 0 1200000 0 165273.6 5958381 0 2400000 0 190938.3 6284477 0 3600000 0 181429.1 6044059 0 4800000 0 173979.2 6223418 0 6000000 0 139288.0 6384560 0 7200000 0 163000.4 6520083 1 8400000 0 57799.2 5388544 1 9600000 0 66461.6 5552969 2 10800000 0 49593.5 5163675 2 12000000 0 57672.1 4889398 After this change: FSUse% Count Size Files/sec App Overhead 0 1200000 0 167987.3 (+1.6%) 6272730 0 2400000 0 198563.9 (+4.0%) 6048847 0 3600000 0 197436.6 (+8.8%) 6163637 0 4800000 0 202880.7 (+16.6%) 6371771 1 6000000 0 167275.9 (+20.1%) 6556733 1 7200000 0 204051.2 (+25.2%) 6817091 1 8400000 0 69622.8 (+20.5%) 5525675 1 9600000 0 69384.5 (+4.4%) 5700723 1 10800000 0 61454.1 (+23.9%) 5363754 3 12000000 0 61908.7 (+7.3%) 5370196 Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-02 10:30:36 +00:00
}
static int search_leaf(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
const struct btrfs_key *key,
struct btrfs_path *path,
int ins_len,
int prev_cmp)
{
struct extent_buffer *leaf = path->nodes[0];
int leaf_free_space = -1;
int search_low_slot = 0;
int ret;
bool do_bin_search = true;
/*
* If we are doing an insertion, the leaf has enough free space and the
* destination slot for the key is not slot 0, then we can unlock our
* write lock on the parent, and any other upper nodes, before doing the
* binary search on the leaf (with search_for_key_slot()), allowing other
* tasks to lock the parent and any other upper nodes.
*/
if (ins_len > 0) {
/*
* Cache the leaf free space, since we will need it later and it
* will not change until then.
*/
leaf_free_space = btrfs_leaf_free_space(leaf);
/*
* !path->locks[1] means we have a single node tree, the leaf is
* the root of the tree.
*/
if (path->locks[1] && leaf_free_space >= ins_len) {
struct btrfs_disk_key first_key;
ASSERT(btrfs_header_nritems(leaf) > 0);
btrfs_item_key(leaf, &first_key, 0);
/*
* Doing the extra comparison with the first key is cheap,
* taking into account that the first key is very likely
* already in a cache line because it immediately follows
* the extent buffer's header and we have recently accessed
* the header's level field.
*/
ret = btrfs_comp_keys(&first_key, key);
if (ret < 0) {
/*
* The first key is smaller than the key we want
* to insert, so we are safe to unlock all upper
* nodes and we have to do the binary search.
*
* We do use btrfs_unlock_up_safe() and not
* unlock_up() because the later does not unlock
* nodes with a slot of 0 - we can safely unlock
* any node even if its slot is 0 since in this
* case the key does not end up at slot 0 of the
* leaf and there's no need to split the leaf.
*/
btrfs_unlock_up_safe(path, 1);
search_low_slot = 1;
} else {
/*
* The first key is >= then the key we want to
* insert, so we can skip the binary search as
* the target key will be at slot 0.
*
* We can not unlock upper nodes when the key is
* less than the first key, because we will need
* to update the key at slot 0 of the parent node
* and possibly of other upper nodes too.
* If the key matches the first key, then we can
* unlock all the upper nodes, using
* btrfs_unlock_up_safe() instead of unlock_up()
* as stated above.
*/
if (ret == 0)
btrfs_unlock_up_safe(path, 1);
/*
* ret is already 0 or 1, matching the result of
* a btrfs_bin_search() call, so there is no need
* to adjust it.
*/
do_bin_search = false;
path->slots[0] = 0;
}
}
}
if (do_bin_search) {
ret = search_for_key_slot(leaf, search_low_slot, key,
prev_cmp, &path->slots[0]);
if (ret < 0)
return ret;
}
if (ins_len > 0) {
/*
* Item key already exists. In this case, if we are allowed to
* insert the item (for example, in dir_item case, item key
* collision is allowed), it will be merged with the original
* item. Only the item size grows, no new btrfs item will be
* added. If search_for_extension is not set, ins_len already
* accounts the size btrfs_item, deduct it here so leaf space
* check will be correct.
*/
if (ret == 0 && !path->search_for_extension) {
ASSERT(ins_len >= sizeof(struct btrfs_item));
ins_len -= sizeof(struct btrfs_item);
}
ASSERT(leaf_free_space >= 0);
if (leaf_free_space < ins_len) {
int err;
err = split_leaf(trans, root, key, path, ins_len,
(ret == 0));
ASSERT(err <= 0);
if (WARN_ON(err > 0))
err = -EUCLEAN;
if (err)
ret = err;
}
}
return ret;
}
/*
* Look for a key in a tree and perform necessary modifications to preserve
* tree invariants.
*
* @trans: Handle of transaction, used when modifying the tree
* @p: Holds all btree nodes along the search path
* @root: The root node of the tree
* @key: The key we are looking for
btrfs: correctly calculate item size used when item key collision happens Item key collision is allowed for some item types, like dir item and inode refs, but the overall item size is limited by the nodesize. item size(ins_len) passed from btrfs_insert_empty_items to btrfs_search_slot already contains size of btrfs_item. When btrfs_search_slot reaches leaf, we'll see if we need to split leaf. The check incorrectly reports that split leaf is required, because it treats the space required by the newly inserted item as btrfs_item + item data. But in item key collision case, only item data is actually needed, the newly inserted item could merge into the existing one. No new btrfs_item will be inserted. And split_leaf return EOVERFLOW from following code: if (extend && data_size + btrfs_item_size_nr(l, slot) + sizeof(struct btrfs_item) > BTRFS_LEAF_DATA_SIZE(fs_info)) return -EOVERFLOW; In most cases, when callers receive EOVERFLOW, they either return this error or handle in different ways. For example, in normal dir item creation the userspace will get errno EOVERFLOW; in inode ref case INODE_EXTREF is used instead. However, this is not the case for rename. To avoid the unrecoverable situation in rename, btrfs_check_dir_item_collision is called in early phase of rename. In this function, when item key collision is detected leaf space is checked: data_size = sizeof(*di) + name_len; if (data_size + btrfs_item_size_nr(leaf, slot) + sizeof(struct btrfs_item) > BTRFS_LEAF_DATA_SIZE(root->fs_info)) the sizeof(struct btrfs_item) + btrfs_item_size_nr(leaf, slot) here refers to existing item size, the condition here correctly calculates the needed size for collision case rather than the wrong case above. The consequence of inconsistent condition check between btrfs_check_dir_item_collision and btrfs_search_slot when item key collision happens is that we might pass check here but fail later at btrfs_search_slot. Rename fails and volume is forced readonly [436149.586170] ------------[ cut here ]------------ [436149.586173] BTRFS: Transaction aborted (error -75) [436149.586196] WARNING: CPU: 0 PID: 16733 at fs/btrfs/inode.c:9870 btrfs_rename2+0x1938/0x1b70 [btrfs] [436149.586227] CPU: 0 PID: 16733 Comm: python Tainted: G D 4.18.0-rc5+ #1 [436149.586228] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 [436149.586238] RIP: 0010:btrfs_rename2+0x1938/0x1b70 [btrfs] [436149.586254] RSP: 0018:ffffa327043a7ce0 EFLAGS: 00010286 [436149.586255] RAX: 0000000000000000 RBX: ffff8d8a17d13340 RCX: 0000000000000006 [436149.586256] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff8d8a7fc164b0 [436149.586257] RBP: ffffa327043a7da0 R08: 0000000000000560 R09: 7265282064657472 [436149.586258] R10: 0000000000000000 R11: 6361736e61725420 R12: ffff8d8a0d4c8b08 [436149.586258] R13: ffff8d8a17d13340 R14: ffff8d8a33e0a540 R15: 00000000000001fe [436149.586260] FS: 00007fa313933740(0000) GS:ffff8d8a7fc00000(0000) knlGS:0000000000000000 [436149.586261] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [436149.586262] CR2: 000055d8d9c9a720 CR3: 000000007aae0003 CR4: 00000000003606f0 [436149.586295] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [436149.586296] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [436149.586296] Call Trace: [436149.586311] vfs_rename+0x383/0x920 [436149.586313] ? vfs_rename+0x383/0x920 [436149.586315] do_renameat2+0x4ca/0x590 [436149.586317] __x64_sys_rename+0x20/0x30 [436149.586324] do_syscall_64+0x5a/0x120 [436149.586330] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [436149.586332] RIP: 0033:0x7fa3133b1d37 [436149.586348] RSP: 002b:00007fffd3e43908 EFLAGS: 00000246 ORIG_RAX: 0000000000000052 [436149.586349] RAX: ffffffffffffffda RBX: 00007fa3133b1d30 RCX: 00007fa3133b1d37 [436149.586350] RDX: 000055d8da06b5e0 RSI: 000055d8da225d60 RDI: 000055d8da2c4da0 [436149.586351] RBP: 000055d8da2252f0 R08: 00007fa313782000 R09: 00000000000177e0 [436149.586351] R10: 000055d8da010680 R11: 0000000000000246 R12: 00007fa313840b00 Thanks to Hans van Kranenburg for information about crc32 hash collision tools, I was able to reproduce the dir item collision with following python script. https://github.com/wutzuchieh/misc_tools/blob/master/crc32_forge.py Run it under a btrfs volume will trigger the abort transaction. It simply creates files and rename them to forged names that leads to hash collision. There are two ways to fix this. One is to simply revert the patch 878f2d2cb355 ("Btrfs: fix max dir item size calculation") to make the condition consistent although that patch is correct about the size. The other way is to handle the leaf space check correctly when collision happens. I prefer the second one since it correct leaf space check in collision case. This fix will not account sizeof(struct btrfs_item) when the item already exists. There are two places where ins_len doesn't contain sizeof(struct btrfs_item), however. 1. extent-tree.c: lookup_inline_extent_backref 2. file-item.c: btrfs_csum_file_blocks to make the logic of btrfs_search_slot more clear, we add a flag search_for_extension in btrfs_path. This flag indicates that ins_len passed to btrfs_search_slot doesn't contain sizeof(struct btrfs_item). When key exists, btrfs_search_slot will use the actual size needed to calculate the required leaf space. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-01 09:25:12 +00:00
* @ins_len: Indicates purpose of search:
* >0 for inserts it's size of item inserted (*)
* <0 for deletions
* 0 for plain searches, not modifying the tree
*
* (*) If size of item inserted doesn't include
* sizeof(struct btrfs_item), then p->search_for_extension must
* be set.
* @cow: boolean should CoW operations be performed. Must always be 1
* when modifying the tree.
*
* If @ins_len > 0, nodes and leaves will be split as we walk down the tree.
* If @ins_len < 0, nodes will be merged as we walk down the tree (if possible)
*
* If @key is found, 0 is returned and you can find the item in the leaf level
* of the path (level 0)
*
* If @key isn't found, 1 is returned and the leaf level of the path (level 0)
* points to the slot where it should be inserted
*
* If an error is encountered while searching the tree a negative error number
* is returned
*/
int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root *root,
const struct btrfs_key *key, struct btrfs_path *p,
int ins_len, int cow)
{
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *b;
int slot;
int ret;
int err;
int level;
int lowest_unlock = 1;
/* everything at write_lock_level or lower must be write locked */
int write_lock_level = 0;
u8 lowest_level = 0;
int min_write_lock_level;
Btrfs: optimize key searches in btrfs_search_slot When the binary search returns 0 (exact match), the target key will necessarily be at slot 0 of all nodes below the current one, so in this case the binary search is not needed because it will always return 0, and we waste time doing it, holding node locks for longer than necessary, etc. Below follow histograms with the times spent on the current approach of doing a binary search when the previous binary search returned 0, and times for the new approach, which directly picks the first item/child node in the leaf/node. Current approach: Count: 6682 Range: 35.000 - 8370.000; Mean: 85.837; Median: 75.000; Stddev: 106.429 Percentiles: 90th: 124.000; 95th: 145.000; 99th: 206.000 35.000 - 61.080: 1235 ################ 61.080 - 106.053: 4207 ##################################################### 106.053 - 183.606: 1122 ############## 183.606 - 317.341: 111 # 317.341 - 547.959: 6 | 547.959 - 8370.000: 1 | Approach proposed by this patch: Count: 6682 Range: 6.000 - 135.000; Mean: 16.690; Median: 16.000; Stddev: 7.160 Percentiles: 90th: 23.000; 95th: 27.000; 99th: 40.000 6.000 - 8.418: 58 # 8.418 - 11.670: 1149 ######################### 11.670 - 16.046: 2418 ##################################################### 16.046 - 21.934: 2098 ############################################## 21.934 - 29.854: 744 ################ 29.854 - 40.511: 154 ### 40.511 - 54.848: 41 # 54.848 - 74.136: 5 | 74.136 - 100.087: 9 | 100.087 - 135.000: 6 | These samples were captured during a run of the btrfs tests 001, 002 and 004 in the xfstests, with a leaf/node size of 4Kb. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-08-30 14:46:43 +00:00
int prev_cmp;
might_sleep();
lowest_level = p->lowest_level;
WARN_ON(lowest_level && ins_len > 0);
WARN_ON(p->nodes[0] != NULL);
BUG_ON(!cow && ins_len);
/*
* For now only allow nowait for read only operations. There's no
* strict reason why we can't, we just only need it for reads so it's
* only implemented for reads.
*/
ASSERT(!p->nowait || !cow);
if (ins_len < 0) {
lowest_unlock = 2;
/* when we are removing items, we might have to go up to level
* two as we update tree pointers Make sure we keep write
* for those levels as well
*/
write_lock_level = 2;
} else if (ins_len > 0) {
/*
* for inserting items, make sure we have a write lock on
* level 1 so we can update keys
*/
write_lock_level = 1;
}
if (!cow)
write_lock_level = -1;
2013-04-05 20:51:15 +00:00
if (cow && (p->keep_locks || p->lowest_level))
write_lock_level = BTRFS_MAX_LEVEL;
min_write_lock_level = write_lock_level;
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
if (p->need_commit_sem) {
ASSERT(p->search_commit_root);
if (p->nowait) {
if (!down_read_trylock(&fs_info->commit_root_sem))
return -EAGAIN;
} else {
down_read(&fs_info->commit_root_sem);
}
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
}
again:
Btrfs: optimize key searches in btrfs_search_slot When the binary search returns 0 (exact match), the target key will necessarily be at slot 0 of all nodes below the current one, so in this case the binary search is not needed because it will always return 0, and we waste time doing it, holding node locks for longer than necessary, etc. Below follow histograms with the times spent on the current approach of doing a binary search when the previous binary search returned 0, and times for the new approach, which directly picks the first item/child node in the leaf/node. Current approach: Count: 6682 Range: 35.000 - 8370.000; Mean: 85.837; Median: 75.000; Stddev: 106.429 Percentiles: 90th: 124.000; 95th: 145.000; 99th: 206.000 35.000 - 61.080: 1235 ################ 61.080 - 106.053: 4207 ##################################################### 106.053 - 183.606: 1122 ############## 183.606 - 317.341: 111 # 317.341 - 547.959: 6 | 547.959 - 8370.000: 1 | Approach proposed by this patch: Count: 6682 Range: 6.000 - 135.000; Mean: 16.690; Median: 16.000; Stddev: 7.160 Percentiles: 90th: 23.000; 95th: 27.000; 99th: 40.000 6.000 - 8.418: 58 # 8.418 - 11.670: 1149 ######################### 11.670 - 16.046: 2418 ##################################################### 16.046 - 21.934: 2098 ############################################## 21.934 - 29.854: 744 ################ 29.854 - 40.511: 154 ### 40.511 - 54.848: 41 # 54.848 - 74.136: 5 | 74.136 - 100.087: 9 | 100.087 - 135.000: 6 | These samples were captured during a run of the btrfs tests 001, 002 and 004 in the xfstests, with a leaf/node size of 4Kb. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-08-30 14:46:43 +00:00
prev_cmp = -1;
b = btrfs_search_slot_get_root(root, p, write_lock_level);
Btrfs: send, fix race with transaction commits that create snapshots If we create a snapshot of a snapshot currently being used by a send operation, we can end up with send failing unexpectedly (returning -ENOENT error to user space for example). The following diagram shows how this happens. CPU 1 CPU2 CPU3 btrfs_ioctl_send() (...) create_snapshot() -> creates snapshot of a root used by the send task btrfs_commit_transaction() create_pending_snapshot() __get_inode_info() btrfs_search_slot() btrfs_search_slot_get_root() down_read commit_root_sem get reference on eb of the commit root -> eb with bytenr == X up_read commit_root_sem btrfs_cow_block(root node) btrfs_free_tree_block() -> creates delayed ref to free the extent btrfs_run_delayed_refs() -> runs the delayed ref, adds extent to fs_info->pinned_extents btrfs_finish_extent_commit() unpin_extent_range() -> marks extent as free in the free space cache transaction commit finishes btrfs_start_transaction() (...) btrfs_cow_block() btrfs_alloc_tree_block() btrfs_reserve_extent() -> allocates extent at bytenr == X btrfs_init_new_buffer(bytenr X) btrfs_find_create_tree_block() alloc_extent_buffer(bytenr X) find_extent_buffer(bytenr X) -> returns existing eb, which the send task got (...) -> modifies content of the eb with bytenr == X -> uses an eb that now belongs to some other tree and no more matches the commit root of the snapshot, resuts will be unpredictable The consequences of this race can be various, and can lead to searches in the commit root performed by the send task failing unexpectedly (unable to find inode items, returning -ENOENT to user space, for example) or not failing because an inode item with the same number was added to the tree that reused the metadata extent, in which case send can behave incorrectly in the worst case or just fail later for some reason. Fix this by performing a copy of the commit root's extent buffer when doing a search in the context of a send operation. CC: stable@vger.kernel.org # 4.4.x: 1fc28d8e2e9: Btrfs: move get root out of btrfs_search_slot to a helper CC: stable@vger.kernel.org # 4.4.x: f9ddfd0592a: Btrfs: remove unused check of skip_locking CC: stable@vger.kernel.org # 4.4.x Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-11 10:19:45 +00:00
if (IS_ERR(b)) {
ret = PTR_ERR(b);
goto done;
}
while (b) {
int dec = 0;
level = btrfs_header_level(b);
if (cow) {
bool last_level = (level == (BTRFS_MAX_LEVEL - 1));
/*
* if we don't really need to cow this block
* then we don't want to set the path blocking,
* so we test it here
*/
btrfs: always abort the transaction if we abort a trans handle While stress testing our error handling I noticed that sometimes we would still commit the transaction even though we had aborted the transaction. Currently we track if a trans handle has dirtied any metadata, and if it hasn't we mark the filesystem as having an error (so no new transactions can be started), but we will allow the current transaction to complete as we do not mark the transaction itself as having been aborted. This sounds good in theory, but we were not properly tracking IO errors in btrfs_finish_ordered_io, and thus committing the transaction with bogus free space data. This isn't necessarily a problem per-se with the free space cache, as the other guards in place would have kept us from accepting the free space cache as valid, but highlights a real world case where we had a bug and could have corrupted the filesystem because of it. This "skip abort on empty trans handle" is nice in theory, but assumes we have perfect error handling everywhere, which we clearly do not. Also we do not allow further transactions to be started, so all this does is save the last transaction that was happening, which doesn't necessarily gain us anything other than the potential for real corruption. Remove this particular bit of code, if we decide we need to abort the transaction then abort the current one and keep us from doing real harm to the file system, regardless of whether this specific trans handle dirtied anything or not. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-05-20 15:21:31 +00:00
if (!should_cow_block(trans, root, b))
goto cow_done;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
/*
* must have write locks on this node and the
* parent
*/
if (level > write_lock_level ||
(level + 1 > write_lock_level &&
level + 1 < BTRFS_MAX_LEVEL &&
p->nodes[level + 1])) {
write_lock_level = level + 1;
btrfs_release_path(p);
goto again;
}
if (last_level)
err = btrfs_cow_block(trans, root, b, NULL, 0,
&b,
BTRFS_NESTING_COW);
else
err = btrfs_cow_block(trans, root, b,
p->nodes[level + 1],
p->slots[level + 1], &b,
BTRFS_NESTING_COW);
if (err) {
ret = err;
goto done;
}
}
cow_done:
p->nodes[level] = b;
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
/*
* we have a lock on b and as long as we aren't changing
* the tree, there is no way to for the items in b to change.
* It is safe to drop the lock on our parent before we
* go through the expensive btree search on b.
*
* If we're inserting or deleting (ins_len != 0), then we might
* be changing slot zero, which may require changing the parent.
* So, we can't drop the lock until after we know which slot
* we're operating on.
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
*/
if (!ins_len && !p->keep_locks) {
int u = level + 1;
if (u < BTRFS_MAX_LEVEL && p->locks[u]) {
btrfs_tree_unlock_rw(p->nodes[u], p->locks[u]);
p->locks[u] = 0;
}
}
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
btrfs: try to unlock parent nodes earlier when inserting a key When inserting a new key, we release the write lock on the leaf's parent only after doing the binary search on the leaf. This is because if the key ends up at slot 0, we will have to update the key at slot 0 of the parent node. The same reasoning applies to any other upper level nodes when their slot is 0. We also need to keep the parent locked in case the leaf does not have enough free space to insert the new key/item, because in that case we will split the leaf and we will need to add a new key to the parent due to a new leaf resulting from the split operation. However if the leaf has enough space for the new key and the key does not end up at slot 0 of the leaf we could release our write lock on the parent before doing the binary search on the leaf to figure out the destination slot. That leads to reducing the amount of time other tasks are blocked waiting to lock the parent, therefore increasing parallelism when there are other tasks that are trying to access other leaves accessible through the same parent. This also applies to other upper nodes besides the immediate parent, when their slot is 0, since we keep locks on them until we figure out if the leaf slot is slot 0 or not. In fact, having the key ending at up slot 0 when is rare. Typically it only happens when the key is less than or equals to the smallest, the "left most", key of the entire btree, during a split attempt when we try to push to the right sibling leaf or when the caller just wants to update the item of an existing key. It's also very common that a leaf has enough space to insert a new key, since after a split we move about half of the keys from one into the new leaf. So unlock the parent, and any other upper level nodes, when during a key insertion we notice the key is greater then the first key in the leaf and the leaf has enough free space. After unlocking the upper level nodes, do the binary search using a low boundary of slot 1 and not slot 0, to figure out the slot where the key will be inserted (or where the key already is in case it exists and the caller wants to modify its item data). This extra comparison, with the first key, is cheap and the key is very likely already in a cache line because it immediately follows the header of the extent buffer and we have recently read the level field of the header (which in fact is the last field of the header). The following fs_mark test was run on a non-debug kernel (debian's default kernel config), with a 12 cores intel CPU, and using a NVMe device: $ cat run-fsmark.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" FILES=100000 THREADS=$(nproc --all) FILE_SIZE=0 echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT OPTS="-S 0 -L 10 -n $FILES -s $FILE_SIZE -t $THREADS -k" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT Before this change: FSUse% Count Size Files/sec App Overhead 0 1200000 0 165273.6 5958381 0 2400000 0 190938.3 6284477 0 3600000 0 181429.1 6044059 0 4800000 0 173979.2 6223418 0 6000000 0 139288.0 6384560 0 7200000 0 163000.4 6520083 1 8400000 0 57799.2 5388544 1 9600000 0 66461.6 5552969 2 10800000 0 49593.5 5163675 2 12000000 0 57672.1 4889398 After this change: FSUse% Count Size Files/sec App Overhead 0 1200000 0 167987.3 (+1.6%) 6272730 0 2400000 0 198563.9 (+4.0%) 6048847 0 3600000 0 197436.6 (+8.8%) 6163637 0 4800000 0 202880.7 (+16.6%) 6371771 1 6000000 0 167275.9 (+20.1%) 6556733 1 7200000 0 204051.2 (+25.2%) 6817091 1 8400000 0 69622.8 (+20.5%) 5525675 1 9600000 0 69384.5 (+4.4%) 5700723 1 10800000 0 61454.1 (+23.9%) 5363754 3 12000000 0 61908.7 (+7.3%) 5370196 Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-02 10:30:36 +00:00
if (level == 0) {
if (ins_len > 0)
ASSERT(write_lock_level >= 1);
ret = search_leaf(trans, root, key, p, ins_len, prev_cmp);
if (!p->search_for_split)
unlock_up(p, level, lowest_unlock,
min_write_lock_level, NULL);
goto done;
}
btrfs: try to unlock parent nodes earlier when inserting a key When inserting a new key, we release the write lock on the leaf's parent only after doing the binary search on the leaf. This is because if the key ends up at slot 0, we will have to update the key at slot 0 of the parent node. The same reasoning applies to any other upper level nodes when their slot is 0. We also need to keep the parent locked in case the leaf does not have enough free space to insert the new key/item, because in that case we will split the leaf and we will need to add a new key to the parent due to a new leaf resulting from the split operation. However if the leaf has enough space for the new key and the key does not end up at slot 0 of the leaf we could release our write lock on the parent before doing the binary search on the leaf to figure out the destination slot. That leads to reducing the amount of time other tasks are blocked waiting to lock the parent, therefore increasing parallelism when there are other tasks that are trying to access other leaves accessible through the same parent. This also applies to other upper nodes besides the immediate parent, when their slot is 0, since we keep locks on them until we figure out if the leaf slot is slot 0 or not. In fact, having the key ending at up slot 0 when is rare. Typically it only happens when the key is less than or equals to the smallest, the "left most", key of the entire btree, during a split attempt when we try to push to the right sibling leaf or when the caller just wants to update the item of an existing key. It's also very common that a leaf has enough space to insert a new key, since after a split we move about half of the keys from one into the new leaf. So unlock the parent, and any other upper level nodes, when during a key insertion we notice the key is greater then the first key in the leaf and the leaf has enough free space. After unlocking the upper level nodes, do the binary search using a low boundary of slot 1 and not slot 0, to figure out the slot where the key will be inserted (or where the key already is in case it exists and the caller wants to modify its item data). This extra comparison, with the first key, is cheap and the key is very likely already in a cache line because it immediately follows the header of the extent buffer and we have recently read the level field of the header (which in fact is the last field of the header). The following fs_mark test was run on a non-debug kernel (debian's default kernel config), with a 12 cores intel CPU, and using a NVMe device: $ cat run-fsmark.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" FILES=100000 THREADS=$(nproc --all) FILE_SIZE=0 echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT OPTS="-S 0 -L 10 -n $FILES -s $FILE_SIZE -t $THREADS -k" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT Before this change: FSUse% Count Size Files/sec App Overhead 0 1200000 0 165273.6 5958381 0 2400000 0 190938.3 6284477 0 3600000 0 181429.1 6044059 0 4800000 0 173979.2 6223418 0 6000000 0 139288.0 6384560 0 7200000 0 163000.4 6520083 1 8400000 0 57799.2 5388544 1 9600000 0 66461.6 5552969 2 10800000 0 49593.5 5163675 2 12000000 0 57672.1 4889398 After this change: FSUse% Count Size Files/sec App Overhead 0 1200000 0 167987.3 (+1.6%) 6272730 0 2400000 0 198563.9 (+4.0%) 6048847 0 3600000 0 197436.6 (+8.8%) 6163637 0 4800000 0 202880.7 (+16.6%) 6371771 1 6000000 0 167275.9 (+20.1%) 6556733 1 7200000 0 204051.2 (+25.2%) 6817091 1 8400000 0 69622.8 (+20.5%) 5525675 1 9600000 0 69384.5 (+4.4%) 5700723 1 10800000 0 61454.1 (+23.9%) 5363754 3 12000000 0 61908.7 (+7.3%) 5370196 Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-02 10:30:36 +00:00
ret = search_for_key_slot(b, 0, key, prev_cmp, &slot);
if (ret < 0)
goto done;
prev_cmp = ret;
if (ret && slot > 0) {
dec = 1;
slot--;
}
p->slots[level] = slot;
err = setup_nodes_for_search(trans, root, p, b, level, ins_len,
&write_lock_level);
if (err == -EAGAIN)
goto again;
if (err) {
ret = err;
goto done;
}
b = p->nodes[level];
slot = p->slots[level];
/*
* Slot 0 is special, if we change the key we have to update
* the parent pointer which means we must have a write lock on
* the parent
*/
if (slot == 0 && ins_len && write_lock_level < level + 1) {
write_lock_level = level + 1;
btrfs_release_path(p);
goto again;
}
unlock_up(p, level, lowest_unlock, min_write_lock_level,
&write_lock_level);
if (level == lowest_level) {
if (dec)
p->slots[level]++;
goto done;
}
err = read_block_for_search(root, p, &b, level, slot, key);
if (err == -EAGAIN)
goto again;
if (err) {
ret = err;
goto done;
}
if (!p->skip_locking) {
level = btrfs_header_level(b);
btrfs: fix lockdep splat with reloc root extent buffers We have been hitting the following lockdep splat with btrfs/187 recently WARNING: possible circular locking dependency detected 5.19.0-rc8+ #775 Not tainted ------------------------------------------------------ btrfs/752500 is trying to acquire lock: ffff97e1875a97b8 (btrfs-treloc-02#2){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110 but task is already holding lock: ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-tree-01/1){+.+.}-{3:3}: down_write_nested+0x41/0x80 __btrfs_tree_lock+0x24/0x110 btrfs_init_new_buffer+0x7d/0x2c0 btrfs_alloc_tree_block+0x120/0x3b0 __btrfs_cow_block+0x136/0x600 btrfs_cow_block+0x10b/0x230 btrfs_search_slot+0x53b/0xb70 btrfs_lookup_inode+0x2a/0xa0 __btrfs_update_delayed_inode+0x5f/0x280 btrfs_async_run_delayed_root+0x24c/0x290 btrfs_work_helper+0xf2/0x3e0 process_one_work+0x271/0x590 worker_thread+0x52/0x3b0 kthread+0xf0/0x120 ret_from_fork+0x1f/0x30 -> #1 (btrfs-tree-01){++++}-{3:3}: down_write_nested+0x41/0x80 __btrfs_tree_lock+0x24/0x110 btrfs_search_slot+0x3c3/0xb70 do_relocation+0x10c/0x6b0 relocate_tree_blocks+0x317/0x6d0 relocate_block_group+0x1f1/0x560 btrfs_relocate_block_group+0x23e/0x400 btrfs_relocate_chunk+0x4c/0x140 btrfs_balance+0x755/0xe40 btrfs_ioctl+0x1ea2/0x2c90 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (btrfs-treloc-02#2){+.+.}-{3:3}: __lock_acquire+0x1122/0x1e10 lock_acquire+0xc2/0x2d0 down_write_nested+0x41/0x80 __btrfs_tree_lock+0x24/0x110 btrfs_lock_root_node+0x31/0x50 btrfs_search_slot+0x1cb/0xb70 replace_path+0x541/0x9f0 merge_reloc_root+0x1d6/0x610 merge_reloc_roots+0xe2/0x260 relocate_block_group+0x2c8/0x560 btrfs_relocate_block_group+0x23e/0x400 btrfs_relocate_chunk+0x4c/0x140 btrfs_balance+0x755/0xe40 btrfs_ioctl+0x1ea2/0x2c90 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Chain exists of: btrfs-treloc-02#2 --> btrfs-tree-01 --> btrfs-tree-01/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-tree-01/1); lock(btrfs-tree-01); lock(btrfs-tree-01/1); lock(btrfs-treloc-02#2); *** DEADLOCK *** 7 locks held by btrfs/752500: #0: ffff97e292fdf460 (sb_writers#12){.+.+}-{0:0}, at: btrfs_ioctl+0x208/0x2c90 #1: ffff97e284c02050 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0x55f/0xe40 #2: ffff97e284c00878 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x236/0x400 #3: ffff97e292fdf650 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xef/0x610 #4: ffff97e284c02378 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0 #5: ffff97e284c023a0 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0 #6: ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110 stack backtrace: CPU: 1 PID: 752500 Comm: btrfs Not tainted 5.19.0-rc8+ #775 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x56/0x73 check_noncircular+0xd6/0x100 ? lock_is_held_type+0xe2/0x140 __lock_acquire+0x1122/0x1e10 lock_acquire+0xc2/0x2d0 ? __btrfs_tree_lock+0x24/0x110 down_write_nested+0x41/0x80 ? __btrfs_tree_lock+0x24/0x110 __btrfs_tree_lock+0x24/0x110 btrfs_lock_root_node+0x31/0x50 btrfs_search_slot+0x1cb/0xb70 ? lock_release+0x137/0x2d0 ? _raw_spin_unlock+0x29/0x50 ? release_extent_buffer+0x128/0x180 replace_path+0x541/0x9f0 merge_reloc_root+0x1d6/0x610 merge_reloc_roots+0xe2/0x260 relocate_block_group+0x2c8/0x560 btrfs_relocate_block_group+0x23e/0x400 btrfs_relocate_chunk+0x4c/0x140 btrfs_balance+0x755/0xe40 btrfs_ioctl+0x1ea2/0x2c90 ? lock_is_held_type+0xe2/0x140 ? lock_is_held_type+0xe2/0x140 ? __x64_sys_ioctl+0x88/0xc0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd This isn't necessarily new, it's just tricky to hit in practice. There are two competing things going on here. With relocation we create a snapshot of every fs tree with a reloc tree. Any extent buffers that get initialized here are initialized with the reloc root lockdep key. However since it is a snapshot, any blocks that are currently in cache that originally belonged to the fs tree will have the normal tree lockdep key set. This creates the lock dependency of reloc tree -> normal tree for the extent buffer locking during the first phase of the relocation as we walk down the reloc root to relocate blocks. However this is problematic because the final phase of the relocation is merging the reloc root into the original fs root. This involves searching down to any keys that exist in the original fs root and then swapping the relocated block and the original fs root block. We have to search down to the fs root first, and then go search the reloc root for the block we need to replace. This creates the dependency of normal tree -> reloc tree which is why lockdep complains. Additionally even if we were to fix this particular mismatch with a different nesting for the merge case, we're still slotting in a block that has a owner of the reloc root objectid into a normal tree, so that block will have its lockdep key set to the tree reloc root, and create a lockdep splat later on when we wander into that block from the fs root. Unfortunately the only solution here is to make sure we do not set the lockdep key to the reloc tree lockdep key normally, and then reset any blocks we wander into from the reloc root when we're doing the merged. This solves the problem of having mixed tree reloc keys intermixed with normal tree keys, and then allows us to make sure in the merge case we maintain the lock order of normal tree -> reloc tree We handle this by setting a bit on the reloc root when we do the search for the block we want to relocate, and any block we search into or COW at that point gets set to the reloc tree key. This works correctly because we only ever COW down to the parent node, so we aren't resetting the key for the block we're linking into the fs root. With this patch we no longer have the lockdep splat in btrfs/187. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-26 20:24:04 +00:00
btrfs_maybe_reset_lockdep_class(root, b);
if (level <= write_lock_level) {
btrfs_tree_lock(b);
p->locks[level] = BTRFS_WRITE_LOCK;
} else {
if (p->nowait) {
if (!btrfs_try_tree_read_lock(b)) {
free_extent_buffer(b);
ret = -EAGAIN;
goto done;
}
} else {
btrfs_tree_read_lock(b);
}
p->locks[level] = BTRFS_READ_LOCK;
}
p->nodes[level] = b;
}
}
ret = 1;
done:
if (ret < 0 && !p->skip_release_on_error)
btrfs_release_path(p);
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
if (p->need_commit_sem) {
int ret2;
ret2 = finish_need_commit_sem_search(p);
up_read(&fs_info->commit_root_sem);
if (ret2)
ret = ret2;
}
return ret;
}
ALLOW_ERROR_INJECTION(btrfs_search_slot, ERRNO);
/*
* Like btrfs_search_slot, this looks for a key in the given tree. It uses the
* current state of the tree together with the operations recorded in the tree
* modification log to search for the key in a previous version of this tree, as
* denoted by the time_seq parameter.
*
* Naturally, there is no support for insert, delete or cow operations.
*
* The resulting path and return value will be set up as if we called
* btrfs_search_slot at that point in time with ins_len and cow both set to 0.
*/
int btrfs_search_old_slot(struct btrfs_root *root, const struct btrfs_key *key,
struct btrfs_path *p, u64 time_seq)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *b;
int slot;
int ret;
int err;
int level;
int lowest_unlock = 1;
u8 lowest_level = 0;
lowest_level = p->lowest_level;
WARN_ON(p->nodes[0] != NULL);
ASSERT(!p->nowait);
if (p->search_commit_root) {
BUG_ON(time_seq);
return btrfs_search_slot(NULL, root, key, p, 0, 0);
}
again:
b = btrfs_get_old_root(root, time_seq);
if (!b) {
ret = -EIO;
goto done;
}
level = btrfs_header_level(b);
p->locks[level] = BTRFS_READ_LOCK;
while (b) {
int dec = 0;
level = btrfs_header_level(b);
p->nodes[level] = b;
/*
* we have a lock on b and as long as we aren't changing
* the tree, there is no way to for the items in b to change.
* It is safe to drop the lock on our parent before we
* go through the expensive btree search on b.
*/
btrfs_unlock_up_safe(p, level + 1);
ret = btrfs_bin_search(b, 0, key, &slot);
if (ret < 0)
goto done;
if (level == 0) {
p->slots[level] = slot;
unlock_up(p, level, lowest_unlock, 0, NULL);
goto done;
}
if (ret && slot > 0) {
dec = 1;
slot--;
}
p->slots[level] = slot;
unlock_up(p, level, lowest_unlock, 0, NULL);
if (level == lowest_level) {
if (dec)
p->slots[level]++;
goto done;
}
err = read_block_for_search(root, p, &b, level, slot, key);
if (err == -EAGAIN)
goto again;
if (err) {
ret = err;
goto done;
}
level = btrfs_header_level(b);
btrfs_tree_read_lock(b);
b = btrfs_tree_mod_log_rewind(fs_info, p, b, time_seq);
if (!b) {
ret = -ENOMEM;
goto done;
}
p->locks[level] = BTRFS_READ_LOCK;
p->nodes[level] = b;
}
ret = 1;
done:
if (ret < 0)
btrfs_release_path(p);
return ret;
}
/*
* Search the tree again to find a leaf with smaller keys.
* Returns 0 if it found something.
* Returns 1 if there are no smaller keys.
* Returns < 0 on error.
*
* This may release the path, and so you may lose any locks held at the
* time you call it.
*/
static int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path)
{
struct btrfs_key key;
struct btrfs_key orig_key;
struct btrfs_disk_key found_key;
int ret;
btrfs_item_key_to_cpu(path->nodes[0], &key, 0);
orig_key = key;
if (key.offset > 0) {
key.offset--;
} else if (key.type > 0) {
key.type--;
key.offset = (u64)-1;
} else if (key.objectid > 0) {
key.objectid--;
key.type = (u8)-1;
key.offset = (u64)-1;
} else {
return 1;
}
btrfs_release_path(path);
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret <= 0)
return ret;
/*
* Previous key not found. Even if we were at slot 0 of the leaf we had
* before releasing the path and calling btrfs_search_slot(), we now may
* be in a slot pointing to the same original key - this can happen if
* after we released the path, one of more items were moved from a
* sibling leaf into the front of the leaf we had due to an insertion
* (see push_leaf_right()).
* If we hit this case and our slot is > 0 and just decrement the slot
* so that the caller does not process the same key again, which may or
* may not break the caller, depending on its logic.
*/
if (path->slots[0] < btrfs_header_nritems(path->nodes[0])) {
btrfs_item_key(path->nodes[0], &found_key, path->slots[0]);
ret = btrfs_comp_keys(&found_key, &orig_key);
if (ret == 0) {
if (path->slots[0] > 0) {
path->slots[0]--;
return 0;
}
/*
* At slot 0, same key as before, it means orig_key is
* the lowest, leftmost, key in the tree. We're done.
*/
return 1;
}
}
btrfs_item_key(path->nodes[0], &found_key, 0);
ret = btrfs_comp_keys(&found_key, &key);
/*
* We might have had an item with the previous key in the tree right
* before we released our path. And after we released our path, that
* item might have been pushed to the first slot (0) of the leaf we
* were holding due to a tree balance. Alternatively, an item with the
* previous key can exist as the only element of a leaf (big fat item).
* Therefore account for these 2 cases, so that our callers (like
* btrfs_previous_item) don't miss an existing item with a key matching
* the previous key we computed above.
*/
if (ret <= 0)
return 0;
return 1;
}
/*
* helper to use instead of search slot if no exact match is needed but
* instead the next or previous item should be returned.
* When find_higher is true, the next higher item is returned, the next lower
* otherwise.
* When return_any and find_higher are both true, and no higher item is found,
* return the next lower instead.
* When return_any is true and find_higher is false, and no lower item is found,
* return the next higher instead.
* It returns 0 if any item is found, 1 if none is found (tree empty), and
* < 0 on error
*/
int btrfs_search_slot_for_read(struct btrfs_root *root,
const struct btrfs_key *key,
struct btrfs_path *p, int find_higher,
int return_any)
{
int ret;
struct extent_buffer *leaf;
again:
ret = btrfs_search_slot(NULL, root, key, p, 0, 0);
if (ret <= 0)
return ret;
/*
* a return value of 1 means the path is at the position where the
* item should be inserted. Normally this is the next bigger item,
* but in case the previous item is the last in a leaf, path points
* to the first free slot in the previous leaf, i.e. at an invalid
* item.
*/
leaf = p->nodes[0];
if (find_higher) {
if (p->slots[0] >= btrfs_header_nritems(leaf)) {
ret = btrfs_next_leaf(root, p);
if (ret <= 0)
return ret;
if (!return_any)
return 1;
/*
* no higher item found, return the next
* lower instead
*/
return_any = 0;
find_higher = 0;
btrfs_release_path(p);
goto again;
}
} else {
if (p->slots[0] == 0) {
ret = btrfs_prev_leaf(root, p);
if (ret < 0)
return ret;
if (!ret) {
leaf = p->nodes[0];
if (p->slots[0] == btrfs_header_nritems(leaf))
p->slots[0]--;
return 0;
}
if (!return_any)
return 1;
/*
* no lower item found, return the next
* higher instead
*/
return_any = 0;
find_higher = 1;
btrfs_release_path(p);
goto again;
} else {
--p->slots[0];
}
}
return 0;
}
/*
* Execute search and call btrfs_previous_item to traverse backwards if the item
* was not found.
*
* Return 0 if found, 1 if not found and < 0 if error.
*/
int btrfs_search_backwards(struct btrfs_root *root, struct btrfs_key *key,
struct btrfs_path *path)
{
int ret;
ret = btrfs_search_slot(NULL, root, key, path, 0, 0);
if (ret > 0)
ret = btrfs_previous_item(root, path, key->objectid, key->type);
if (ret == 0)
btrfs_item_key_to_cpu(path->nodes[0], key, path->slots[0]);
return ret;
}
/*
* Search for a valid slot for the given path.
*
* @root: The root node of the tree.
* @key: Will contain a valid item if found.
* @path: The starting point to validate the slot.
*
* Return: 0 if the item is valid
* 1 if not found
* <0 if error.
*/
int btrfs_get_next_valid_item(struct btrfs_root *root, struct btrfs_key *key,
struct btrfs_path *path)
{
if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) {
int ret;
ret = btrfs_next_leaf(root, path);
if (ret)
return ret;
}
btrfs_item_key_to_cpu(path->nodes[0], key, path->slots[0]);
return 0;
}
/*
* adjust the pointers going up the tree, starting at level
* making sure the right key of each node is points to 'key'.
* This is used after shifting pointers to the left, so it stops
* fixing up pointers when a given leaf/node is not in slot 0 of the
* higher levels
*
*/
static void fixup_low_keys(struct btrfs_trans_handle *trans,
struct btrfs_path *path,
struct btrfs_disk_key *key, int level)
{
int i;
struct extent_buffer *t;
int ret;
for (i = level; i < BTRFS_MAX_LEVEL; i++) {
int tslot = path->slots[i];
if (!path->nodes[i])
break;
t = path->nodes[i];
ret = btrfs_tree_mod_log_insert_key(t, tslot,
BTRFS_MOD_LOG_KEY_REPLACE);
BUG_ON(ret < 0);
btrfs_set_node_key(t, key, tslot);
btrfs_mark_buffer_dirty(trans, path->nodes[i]);
if (tslot != 0)
break;
}
}
/*
* update item key.
*
* This function isn't completely safe. It's the caller's responsibility
* that the new key won't break the order
*/
void btrfs_set_item_key_safe(struct btrfs_trans_handle *trans,
struct btrfs_path *path,
const struct btrfs_key *new_key)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_disk_key disk_key;
struct extent_buffer *eb;
int slot;
eb = path->nodes[0];
slot = path->slots[0];
if (slot > 0) {
btrfs_item_key(eb, &disk_key, slot - 1);
if (unlikely(btrfs_comp_keys(&disk_key, new_key) >= 0)) {
btrfs_print_leaf(eb);
btrfs: ctree: Dump the leaf before BUG_ON in btrfs_set_item_key_safe We have a long standing problem with reversed keys that's detected by btrfs_set_item_key_safe. This is hard to reproduce so we'd like to capture more information for later analysis. Let's dump the leaf content before triggering BUG_ON() so that we can have some clue on what's going wrong. The output of tree locks should help us to debug such problem. Sample stacktrace: generic/522 [00:07:05] [26946.113381] run fstests generic/522 at 2019-04-16 00:07:05 [27161.474720] kernel BUG at fs/btrfs/ctree.c:3192! [27161.475923] invalid opcode: 0000 [#1] PREEMPT SMP [27161.477167] CPU: 0 PID: 15676 Comm: fsx Tainted: G W 5.1.0-rc5-default+ #562 [27161.478932] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014 [27161.481099] RIP: 0010:btrfs_set_item_key_safe+0x146/0x1c0 [btrfs] [27161.485369] RSP: 0018:ffffb087499e39b0 EFLAGS: 00010286 [27161.486464] RAX: 00000000ffffffff RBX: ffff941534d80e70 RCX: 0000000000024000 [27161.487929] RDX: 0000000000013039 RSI: ffffb087499e3aa5 RDI: ffffb087499e39c7 [27161.489289] RBP: 000000000000000e R08: ffff9414e0f49008 R09: 0000000000001000 [27161.490807] R10: 0000000000000000 R11: 0000000000000003 R12: ffff9414e0f48e70 [27161.492305] R13: ffffb087499e3aa5 R14: 0000000000000000 R15: 0000000000071000 [27161.493845] FS: 00007f8ea58d0b80(0000) GS:ffff94153d400000(0000) knlGS:0000000000000000 [27161.495608] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27161.496717] CR2: 00007f8ea57a9000 CR3: 0000000016a33000 CR4: 00000000000006f0 [27161.498100] Call Trace: [27161.498771] __btrfs_drop_extents+0x6ec/0xdf0 [btrfs] [27161.499872] btrfs_log_changed_extents.isra.26+0x3a2/0x9e0 [btrfs] [27161.501114] btrfs_log_inode+0x7ff/0xdc0 [btrfs] [27161.502114] ? __mutex_unlock_slowpath+0x4b/0x2b0 [27161.503172] btrfs_log_inode_parent+0x237/0x9c0 [btrfs] [27161.504348] btrfs_log_dentry_safe+0x4a/0x70 [btrfs] [27161.505374] btrfs_sync_file+0x1b7/0x480 [btrfs] [27161.506371] __x64_sys_msync+0x180/0x210 [27161.507208] do_syscall_64+0x54/0x180 [27161.507932] entry_SYSCALL_64_after_hwframe+0x49/0xbe [27161.508839] RIP: 0033:0x7f8ea5aa9c61 [27161.512616] RSP: 002b:00007ffea2a06498 EFLAGS: 00000246 ORIG_RAX: 000000000000001a [27161.514161] RAX: ffffffffffffffda RBX: 000000000002a938 RCX: 00007f8ea5aa9c61 [27161.515376] RDX: 0000000000000004 RSI: 000000000001c9b2 RDI: 00007f8ea578d000 [27161.516572] RBP: 000000000001c07a R08: fffffffffffffff8 R09: 000000000002a000 [27161.517883] R10: 00007f8ea57a99b2 R11: 0000000000000246 R12: 0000000000000938 [27161.519080] R13: 00007f8ea578d000 R14: 000000000001c9b2 R15: 0000000000000000 [27161.520281] Modules linked in: btrfs libcrc32c xor zstd_decompress zstd_compress xxhash raid6_pq loop [last unloaded: scsi_debug] [27161.522272] ---[ end trace d5afec7ccac6a252 ]--- [27161.523111] RIP: 0010:btrfs_set_item_key_safe+0x146/0x1c0 [btrfs] [27161.527253] RSP: 0018:ffffb087499e39b0 EFLAGS: 00010286 [27161.528192] RAX: 00000000ffffffff RBX: ffff941534d80e70 RCX: 0000000000024000 [27161.529392] RDX: 0000000000013039 RSI: ffffb087499e3aa5 RDI: ffffb087499e39c7 [27161.530607] RBP: 000000000000000e R08: ffff9414e0f49008 R09: 0000000000001000 [27161.531802] R10: 0000000000000000 R11: 0000000000000003 R12: ffff9414e0f48e70 [27161.533018] R13: ffffb087499e3aa5 R14: 0000000000000000 R15: 0000000000071000 [27161.534405] FS: 00007f8ea58d0b80(0000) GS:ffff94153d400000(0000) knlGS:0000000000000000 [27161.536048] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27161.537210] CR2: 00007f8ea57a9000 CR3: 0000000016a33000 CR4: 00000000000006f0 Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-25 00:55:53 +00:00
btrfs_crit(fs_info,
"slot %u key (%llu %u %llu) new key (%llu %u %llu)",
slot, btrfs_disk_key_objectid(&disk_key),
btrfs_disk_key_type(&disk_key),
btrfs_disk_key_offset(&disk_key),
new_key->objectid, new_key->type,
new_key->offset);
BUG();
}
}
if (slot < btrfs_header_nritems(eb) - 1) {
btrfs_item_key(eb, &disk_key, slot + 1);
if (unlikely(btrfs_comp_keys(&disk_key, new_key) <= 0)) {
btrfs_print_leaf(eb);
btrfs: ctree: Dump the leaf before BUG_ON in btrfs_set_item_key_safe We have a long standing problem with reversed keys that's detected by btrfs_set_item_key_safe. This is hard to reproduce so we'd like to capture more information for later analysis. Let's dump the leaf content before triggering BUG_ON() so that we can have some clue on what's going wrong. The output of tree locks should help us to debug such problem. Sample stacktrace: generic/522 [00:07:05] [26946.113381] run fstests generic/522 at 2019-04-16 00:07:05 [27161.474720] kernel BUG at fs/btrfs/ctree.c:3192! [27161.475923] invalid opcode: 0000 [#1] PREEMPT SMP [27161.477167] CPU: 0 PID: 15676 Comm: fsx Tainted: G W 5.1.0-rc5-default+ #562 [27161.478932] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014 [27161.481099] RIP: 0010:btrfs_set_item_key_safe+0x146/0x1c0 [btrfs] [27161.485369] RSP: 0018:ffffb087499e39b0 EFLAGS: 00010286 [27161.486464] RAX: 00000000ffffffff RBX: ffff941534d80e70 RCX: 0000000000024000 [27161.487929] RDX: 0000000000013039 RSI: ffffb087499e3aa5 RDI: ffffb087499e39c7 [27161.489289] RBP: 000000000000000e R08: ffff9414e0f49008 R09: 0000000000001000 [27161.490807] R10: 0000000000000000 R11: 0000000000000003 R12: ffff9414e0f48e70 [27161.492305] R13: ffffb087499e3aa5 R14: 0000000000000000 R15: 0000000000071000 [27161.493845] FS: 00007f8ea58d0b80(0000) GS:ffff94153d400000(0000) knlGS:0000000000000000 [27161.495608] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27161.496717] CR2: 00007f8ea57a9000 CR3: 0000000016a33000 CR4: 00000000000006f0 [27161.498100] Call Trace: [27161.498771] __btrfs_drop_extents+0x6ec/0xdf0 [btrfs] [27161.499872] btrfs_log_changed_extents.isra.26+0x3a2/0x9e0 [btrfs] [27161.501114] btrfs_log_inode+0x7ff/0xdc0 [btrfs] [27161.502114] ? __mutex_unlock_slowpath+0x4b/0x2b0 [27161.503172] btrfs_log_inode_parent+0x237/0x9c0 [btrfs] [27161.504348] btrfs_log_dentry_safe+0x4a/0x70 [btrfs] [27161.505374] btrfs_sync_file+0x1b7/0x480 [btrfs] [27161.506371] __x64_sys_msync+0x180/0x210 [27161.507208] do_syscall_64+0x54/0x180 [27161.507932] entry_SYSCALL_64_after_hwframe+0x49/0xbe [27161.508839] RIP: 0033:0x7f8ea5aa9c61 [27161.512616] RSP: 002b:00007ffea2a06498 EFLAGS: 00000246 ORIG_RAX: 000000000000001a [27161.514161] RAX: ffffffffffffffda RBX: 000000000002a938 RCX: 00007f8ea5aa9c61 [27161.515376] RDX: 0000000000000004 RSI: 000000000001c9b2 RDI: 00007f8ea578d000 [27161.516572] RBP: 000000000001c07a R08: fffffffffffffff8 R09: 000000000002a000 [27161.517883] R10: 00007f8ea57a99b2 R11: 0000000000000246 R12: 0000000000000938 [27161.519080] R13: 00007f8ea578d000 R14: 000000000001c9b2 R15: 0000000000000000 [27161.520281] Modules linked in: btrfs libcrc32c xor zstd_decompress zstd_compress xxhash raid6_pq loop [last unloaded: scsi_debug] [27161.522272] ---[ end trace d5afec7ccac6a252 ]--- [27161.523111] RIP: 0010:btrfs_set_item_key_safe+0x146/0x1c0 [btrfs] [27161.527253] RSP: 0018:ffffb087499e39b0 EFLAGS: 00010286 [27161.528192] RAX: 00000000ffffffff RBX: ffff941534d80e70 RCX: 0000000000024000 [27161.529392] RDX: 0000000000013039 RSI: ffffb087499e3aa5 RDI: ffffb087499e39c7 [27161.530607] RBP: 000000000000000e R08: ffff9414e0f49008 R09: 0000000000001000 [27161.531802] R10: 0000000000000000 R11: 0000000000000003 R12: ffff9414e0f48e70 [27161.533018] R13: ffffb087499e3aa5 R14: 0000000000000000 R15: 0000000000071000 [27161.534405] FS: 00007f8ea58d0b80(0000) GS:ffff94153d400000(0000) knlGS:0000000000000000 [27161.536048] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27161.537210] CR2: 00007f8ea57a9000 CR3: 0000000016a33000 CR4: 00000000000006f0 Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-25 00:55:53 +00:00
btrfs_crit(fs_info,
"slot %u key (%llu %u %llu) new key (%llu %u %llu)",
slot, btrfs_disk_key_objectid(&disk_key),
btrfs_disk_key_type(&disk_key),
btrfs_disk_key_offset(&disk_key),
new_key->objectid, new_key->type,
new_key->offset);
BUG();
}
}
btrfs_cpu_key_to_disk(&disk_key, new_key);
btrfs_set_item_key(eb, &disk_key, slot);
btrfs_mark_buffer_dirty(trans, eb);
if (slot == 0)
fixup_low_keys(trans, path, &disk_key, 1);
}
btrfs: ctree: check key order before merging tree blocks [BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833 Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-19 06:35:50 +00:00
/*
* Check key order of two sibling extent buffers.
*
* Return true if something is wrong.
* Return false if everything is fine.
*
* Tree-checker only works inside one tree block, thus the following
* corruption can not be detected by tree-checker:
*
* Leaf @left | Leaf @right
* --------------------------------------------------------------
* | 1 | 2 | 3 | 4 | 5 | f6 | | 7 | 8 |
*
* Key f6 in leaf @left itself is valid, but not valid when the next
* key in leaf @right is 7.
* This can only be checked at tree block merge time.
* And since tree checker has ensured all key order in each tree block
* is correct, we only need to bother the last key of @left and the first
* key of @right.
*/
static bool check_sibling_keys(struct extent_buffer *left,
struct extent_buffer *right)
{
struct btrfs_key left_last;
struct btrfs_key right_first;
int level = btrfs_header_level(left);
int nr_left = btrfs_header_nritems(left);
int nr_right = btrfs_header_nritems(right);
/* No key to check in one of the tree blocks */
if (!nr_left || !nr_right)
return false;
if (level) {
btrfs_node_key_to_cpu(left, &left_last, nr_left - 1);
btrfs_node_key_to_cpu(right, &right_first, 0);
} else {
btrfs_item_key_to_cpu(left, &left_last, nr_left - 1);
btrfs_item_key_to_cpu(right, &right_first, 0);
}
if (unlikely(btrfs_comp_cpu_keys(&left_last, &right_first) >= 0)) {
btrfs_crit(left->fs_info, "left extent buffer:");
btrfs_print_tree(left, false);
btrfs_crit(left->fs_info, "right extent buffer:");
btrfs_print_tree(right, false);
btrfs: ctree: check key order before merging tree blocks [BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833 Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-19 06:35:50 +00:00
btrfs_crit(left->fs_info,
"bad key order, sibling blocks, left last (%llu %u %llu) right first (%llu %u %llu)",
left_last.objectid, left_last.type,
left_last.offset, right_first.objectid,
right_first.type, right_first.offset);
return true;
}
return false;
}
/*
* try to push data from one node into the next node left in the
* tree.
*
* returns 0 if some ptrs were pushed left, < 0 if there was some horrible
* error, and > 0 if there was no room in the left hand block.
*/
static int push_node_left(struct btrfs_trans_handle *trans,
struct extent_buffer *dst,
struct extent_buffer *src, int empty)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
int push_items = 0;
int src_nritems;
int dst_nritems;
int ret = 0;
src_nritems = btrfs_header_nritems(src);
dst_nritems = btrfs_header_nritems(dst);
push_items = BTRFS_NODEPTRS_PER_BLOCK(fs_info) - dst_nritems;
WARN_ON(btrfs_header_generation(src) != trans->transid);
WARN_ON(btrfs_header_generation(dst) != trans->transid);
if (!empty && src_nritems <= 8)
return 1;
if (push_items <= 0)
return 1;
if (empty) {
push_items = min(src_nritems, push_items);
if (push_items < src_nritems) {
/* leave at least 8 pointers in the node if
* we aren't going to empty it
*/
if (src_nritems - push_items < 8) {
if (push_items <= 8)
return 1;
push_items -= 8;
}
}
} else
push_items = min(src_nritems - 8, push_items);
btrfs: ctree: check key order before merging tree blocks [BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833 Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-19 06:35:50 +00:00
/* dst is the left eb, src is the middle eb */
if (check_sibling_keys(dst, src)) {
ret = -EUCLEAN;
btrfs_abort_transaction(trans, ret);
return ret;
}
ret = btrfs_tree_mod_log_eb_copy(dst, src, dst_nritems, 0, push_items);
Btrfs: fix tree mod logging While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-20 15:17:46 +00:00
if (ret) {
btrfs_abort_transaction(trans, ret);
Btrfs: fix tree mod logging While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-20 15:17:46 +00:00
return ret;
}
copy_extent_buffer(dst, src,
btrfs_node_key_ptr_offset(dst, dst_nritems),
btrfs_node_key_ptr_offset(src, 0),
push_items * sizeof(struct btrfs_key_ptr));
if (push_items < src_nritems) {
/*
btrfs: insert tree mod log move in push_node_left There is a fairly unlikely race condition in tree mod log rewind that can result in a kernel panic which has the following trace: [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002 [530.618] #PF: supervisor read access in kernel mode [530.629] #PF: error_code(0x0000) - not-present page [530.641] PGD 0 P4D 0 [530.647] Oops: 0000 [#1] SMP [530.654] CPU: 30 PID: 398973 Comm: below Kdump: loaded Tainted: G S O K 5.12.0-0_fbk13_clang_7455_gb24de3bdb045 #1 [530.680] Hardware name: Quanta Mono Lake-M.2 SATA 1HY9U9Z001G/Mono Lake-M.2 SATA, BIOS F20_3A15 08/16/2017 [530.703] RIP: 0010:__btrfs_map_block+0xaa/0xd00 [530.755] RSP: 0018:ffffc9002c2f7600 EFLAGS: 00010246 [530.767] RAX: ffffffffffffffea RBX: ffff888292e41000 RCX: f2702d8b8be15100 [530.784] RDX: ffff88885fda6fb8 RSI: ffff88885fd973c8 RDI: ffff88885fd973c8 [530.800] RBP: ffff888292e410d0 R08: ffffffff82fd7fd0 R09: 00000000fffeffff [530.816] R10: ffffffff82e57fd0 R11: ffffffff82e57d70 R12: 0000000000000000 [530.832] R13: 0000000000001000 R14: 0000000000001000 R15: ffffc9002c2f76f0 [530.848] FS: 00007f38d64af000(0000) GS:ffff88885fd80000(0000) knlGS:0000000000000000 [530.866] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [530.880] CR2: 0000000000000002 CR3: 00000002b6770004 CR4: 00000000003706e0 [530.896] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [530.912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [530.928] Call Trace: [530.934] ? btrfs_printk+0x13b/0x18c [530.943] ? btrfs_bio_counter_inc_blocked+0x3d/0x130 [530.955] btrfs_map_bio+0x75/0x330 [530.963] ? kmem_cache_alloc+0x12a/0x2d0 [530.973] ? btrfs_submit_metadata_bio+0x63/0x100 [530.984] btrfs_submit_metadata_bio+0xa4/0x100 [530.995] submit_extent_page+0x30f/0x360 [531.004] read_extent_buffer_pages+0x49e/0x6d0 [531.015] ? submit_extent_page+0x360/0x360 [531.025] btree_read_extent_buffer_pages+0x5f/0x150 [531.037] read_tree_block+0x37/0x60 [531.046] read_block_for_search+0x18b/0x410 [531.056] btrfs_search_old_slot+0x198/0x2f0 [531.066] resolve_indirect_ref+0xfe/0x6f0 [531.076] ? ulist_alloc+0x31/0x60 [531.084] ? kmem_cache_alloc_trace+0x12e/0x2b0 [531.095] find_parent_nodes+0x720/0x1830 [531.105] ? ulist_alloc+0x10/0x60 [531.113] iterate_extent_inodes+0xea/0x370 [531.123] ? btrfs_previous_extent_item+0x8f/0x110 [531.134] ? btrfs_search_path_in_tree+0x240/0x240 [531.146] iterate_inodes_from_logical+0x98/0xd0 [531.157] ? btrfs_search_path_in_tree+0x240/0x240 [531.168] btrfs_ioctl_logical_to_ino+0xd9/0x180 [531.179] btrfs_ioctl+0xe2/0x2eb0 This occurs when logical inode resolution takes a tree mod log sequence number, and then while backref walking hits a rewind on a busy node which has the following sequence of tree mod log operations (numbers filled in from a specific example, but they are somewhat arbitrary) REMOVE_WHILE_FREEING slot 532 REMOVE_WHILE_FREEING slot 531 REMOVE_WHILE_FREEING slot 530 ... REMOVE_WHILE_FREEING slot 0 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 ADD slot 455 ADD slot 454 ADD slot 453 ... ADD slot 0 MOVE src slot 0 -> dst slot 456 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 When this sequence gets applied via btrfs_tree_mod_log_rewind, it allocates a fresh rewind eb, and first inserts the correct key info for the 533 elements, then overwrites the first 456 of them, then decrements the count by 456 via the add ops, then rewinds the move by doing a memmove from 456:988->0:532. We have never written anything past 532, so that memmove writes garbage into the 0:532 range. In practice, this results in a lot of fully 0 keys. The rewind then puts valid keys into slots 0:455 with the last removes, but 456:532 are still invalid. When search_old_slot uses this eb, if it uses one of those invalid slots, it can then read the extent buffer and issue a bio for offset 0 which ultimately panics looking up extent mappings. This bad tree mod log sequence gets generated when the node balancing code happens to do a balance_node_right followed by a push_node_left while logging in the tree mod log. Illustrated for ebs L and R (left and right): L R start: [XXX|YYY|...] [ZZZ|...|...] balance_node_right: [XXX|YYY|...] [...|ZZZ|...] move Z to make room for Y [XXX|...|...] [YYY|ZZZ|...] copy Y from L to R push_node_left: [XXX|YYY|...] [...|ZZZ|...] copy Y from R to L [XXX|YYY|...] [ZZZ|...|...] move Z into emptied space (NOT LOGGED!) This is because balance_node_right logs a move, but push_node_left explicitly doesn't. That is because logging the move would remove the overwritten src < dst range in the right eb, which was already logged when we called btrfs_tree_mod_log_eb_copy. The correct sequence would include a move from 456:988 to 0:532 after remove 0:455 and before removing 0:532. Reversing that sequence would entail creating keys for 0:532, then moving those keys out to 456:988, then creating more keys for 0:455. i.e., REMOVE_WHILE_FREEING slot 532 REMOVE_WHILE_FREEING slot 531 REMOVE_WHILE_FREEING slot 530 ... REMOVE_WHILE_FREEING slot 0 MOVE src slot 456 -> dst slot 0 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 ADD slot 455 ADD slot 454 ADD slot 453 ... ADD slot 0 MOVE src slot 0 -> dst slot 456 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 Fix this to log the move but avoid the double remove by putting all the logging logic in btrfs_tree_mod_log_eb_copy which has enough information to detect these cases and properly log moves, removes, and adds. Leave btrfs_tree_mod_log_insert_move to handle insert_ptr and delete_ptr's tree mod logging. (Un)fortunately, this is quite difficult to reproduce, and I was only able to reproduce it by adding sleeps in btrfs_search_old_slot that would encourage more log rewinding during ino_to_logical ioctls. I was able to hit the warning in the previous patch in the series without the fix quite quickly, but not after this patch. CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-01 18:55:14 +00:00
* btrfs_tree_mod_log_eb_copy handles logging the move, so we
* don't need to do an explicit tree mod log operation for it.
*/
memmove_extent_buffer(src, btrfs_node_key_ptr_offset(src, 0),
btrfs_node_key_ptr_offset(src, push_items),
(src_nritems - push_items) *
sizeof(struct btrfs_key_ptr));
}
btrfs_set_header_nritems(src, src_nritems - push_items);
btrfs_set_header_nritems(dst, dst_nritems + push_items);
btrfs_mark_buffer_dirty(trans, src);
btrfs_mark_buffer_dirty(trans, dst);
return ret;
}
/*
* try to push data from one node into the next node right in the
* tree.
*
* returns 0 if some ptrs were pushed, < 0 if there was some horrible
* error, and > 0 if there was no room in the right hand block.
*
* this will only push up to 1/2 the contents of the left node over
*/
static int balance_node_right(struct btrfs_trans_handle *trans,
struct extent_buffer *dst,
struct extent_buffer *src)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
int push_items = 0;
int max_push;
int src_nritems;
int dst_nritems;
int ret = 0;
WARN_ON(btrfs_header_generation(src) != trans->transid);
WARN_ON(btrfs_header_generation(dst) != trans->transid);
src_nritems = btrfs_header_nritems(src);
dst_nritems = btrfs_header_nritems(dst);
push_items = BTRFS_NODEPTRS_PER_BLOCK(fs_info) - dst_nritems;
if (push_items <= 0)
return 1;
if (src_nritems < 4)
return 1;
max_push = src_nritems / 2 + 1;
/* don't try to empty the node */
if (max_push >= src_nritems)
return 1;
if (max_push < push_items)
push_items = max_push;
btrfs: ctree: check key order before merging tree blocks [BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833 Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-19 06:35:50 +00:00
/* dst is the right eb, src is the middle eb */
if (check_sibling_keys(src, dst)) {
ret = -EUCLEAN;
btrfs_abort_transaction(trans, ret);
return ret;
}
btrfs: insert tree mod log move in push_node_left There is a fairly unlikely race condition in tree mod log rewind that can result in a kernel panic which has the following trace: [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002 [530.618] #PF: supervisor read access in kernel mode [530.629] #PF: error_code(0x0000) - not-present page [530.641] PGD 0 P4D 0 [530.647] Oops: 0000 [#1] SMP [530.654] CPU: 30 PID: 398973 Comm: below Kdump: loaded Tainted: G S O K 5.12.0-0_fbk13_clang_7455_gb24de3bdb045 #1 [530.680] Hardware name: Quanta Mono Lake-M.2 SATA 1HY9U9Z001G/Mono Lake-M.2 SATA, BIOS F20_3A15 08/16/2017 [530.703] RIP: 0010:__btrfs_map_block+0xaa/0xd00 [530.755] RSP: 0018:ffffc9002c2f7600 EFLAGS: 00010246 [530.767] RAX: ffffffffffffffea RBX: ffff888292e41000 RCX: f2702d8b8be15100 [530.784] RDX: ffff88885fda6fb8 RSI: ffff88885fd973c8 RDI: ffff88885fd973c8 [530.800] RBP: ffff888292e410d0 R08: ffffffff82fd7fd0 R09: 00000000fffeffff [530.816] R10: ffffffff82e57fd0 R11: ffffffff82e57d70 R12: 0000000000000000 [530.832] R13: 0000000000001000 R14: 0000000000001000 R15: ffffc9002c2f76f0 [530.848] FS: 00007f38d64af000(0000) GS:ffff88885fd80000(0000) knlGS:0000000000000000 [530.866] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [530.880] CR2: 0000000000000002 CR3: 00000002b6770004 CR4: 00000000003706e0 [530.896] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [530.912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [530.928] Call Trace: [530.934] ? btrfs_printk+0x13b/0x18c [530.943] ? btrfs_bio_counter_inc_blocked+0x3d/0x130 [530.955] btrfs_map_bio+0x75/0x330 [530.963] ? kmem_cache_alloc+0x12a/0x2d0 [530.973] ? btrfs_submit_metadata_bio+0x63/0x100 [530.984] btrfs_submit_metadata_bio+0xa4/0x100 [530.995] submit_extent_page+0x30f/0x360 [531.004] read_extent_buffer_pages+0x49e/0x6d0 [531.015] ? submit_extent_page+0x360/0x360 [531.025] btree_read_extent_buffer_pages+0x5f/0x150 [531.037] read_tree_block+0x37/0x60 [531.046] read_block_for_search+0x18b/0x410 [531.056] btrfs_search_old_slot+0x198/0x2f0 [531.066] resolve_indirect_ref+0xfe/0x6f0 [531.076] ? ulist_alloc+0x31/0x60 [531.084] ? kmem_cache_alloc_trace+0x12e/0x2b0 [531.095] find_parent_nodes+0x720/0x1830 [531.105] ? ulist_alloc+0x10/0x60 [531.113] iterate_extent_inodes+0xea/0x370 [531.123] ? btrfs_previous_extent_item+0x8f/0x110 [531.134] ? btrfs_search_path_in_tree+0x240/0x240 [531.146] iterate_inodes_from_logical+0x98/0xd0 [531.157] ? btrfs_search_path_in_tree+0x240/0x240 [531.168] btrfs_ioctl_logical_to_ino+0xd9/0x180 [531.179] btrfs_ioctl+0xe2/0x2eb0 This occurs when logical inode resolution takes a tree mod log sequence number, and then while backref walking hits a rewind on a busy node which has the following sequence of tree mod log operations (numbers filled in from a specific example, but they are somewhat arbitrary) REMOVE_WHILE_FREEING slot 532 REMOVE_WHILE_FREEING slot 531 REMOVE_WHILE_FREEING slot 530 ... REMOVE_WHILE_FREEING slot 0 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 ADD slot 455 ADD slot 454 ADD slot 453 ... ADD slot 0 MOVE src slot 0 -> dst slot 456 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 When this sequence gets applied via btrfs_tree_mod_log_rewind, it allocates a fresh rewind eb, and first inserts the correct key info for the 533 elements, then overwrites the first 456 of them, then decrements the count by 456 via the add ops, then rewinds the move by doing a memmove from 456:988->0:532. We have never written anything past 532, so that memmove writes garbage into the 0:532 range. In practice, this results in a lot of fully 0 keys. The rewind then puts valid keys into slots 0:455 with the last removes, but 456:532 are still invalid. When search_old_slot uses this eb, if it uses one of those invalid slots, it can then read the extent buffer and issue a bio for offset 0 which ultimately panics looking up extent mappings. This bad tree mod log sequence gets generated when the node balancing code happens to do a balance_node_right followed by a push_node_left while logging in the tree mod log. Illustrated for ebs L and R (left and right): L R start: [XXX|YYY|...] [ZZZ|...|...] balance_node_right: [XXX|YYY|...] [...|ZZZ|...] move Z to make room for Y [XXX|...|...] [YYY|ZZZ|...] copy Y from L to R push_node_left: [XXX|YYY|...] [...|ZZZ|...] copy Y from R to L [XXX|YYY|...] [ZZZ|...|...] move Z into emptied space (NOT LOGGED!) This is because balance_node_right logs a move, but push_node_left explicitly doesn't. That is because logging the move would remove the overwritten src < dst range in the right eb, which was already logged when we called btrfs_tree_mod_log_eb_copy. The correct sequence would include a move from 456:988 to 0:532 after remove 0:455 and before removing 0:532. Reversing that sequence would entail creating keys for 0:532, then moving those keys out to 456:988, then creating more keys for 0:455. i.e., REMOVE_WHILE_FREEING slot 532 REMOVE_WHILE_FREEING slot 531 REMOVE_WHILE_FREEING slot 530 ... REMOVE_WHILE_FREEING slot 0 MOVE src slot 456 -> dst slot 0 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 ADD slot 455 ADD slot 454 ADD slot 453 ... ADD slot 0 MOVE src slot 0 -> dst slot 456 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 Fix this to log the move but avoid the double remove by putting all the logging logic in btrfs_tree_mod_log_eb_copy which has enough information to detect these cases and properly log moves, removes, and adds. Leave btrfs_tree_mod_log_insert_move to handle insert_ptr and delete_ptr's tree mod logging. (Un)fortunately, this is quite difficult to reproduce, and I was only able to reproduce it by adding sleeps in btrfs_search_old_slot that would encourage more log rewinding during ino_to_logical ioctls. I was able to hit the warning in the previous patch in the series without the fix quite quickly, but not after this patch. CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-01 18:55:14 +00:00
/*
* btrfs_tree_mod_log_eb_copy handles logging the move, so we don't
* need to do an explicit tree mod log operation for it.
*/
memmove_extent_buffer(dst, btrfs_node_key_ptr_offset(dst, push_items),
btrfs_node_key_ptr_offset(dst, 0),
(dst_nritems) *
sizeof(struct btrfs_key_ptr));
ret = btrfs_tree_mod_log_eb_copy(dst, src, 0, src_nritems - push_items,
push_items);
Btrfs: fix tree mod logging While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-20 15:17:46 +00:00
if (ret) {
btrfs_abort_transaction(trans, ret);
Btrfs: fix tree mod logging While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-20 15:17:46 +00:00
return ret;
}
copy_extent_buffer(dst, src,
btrfs_node_key_ptr_offset(dst, 0),
btrfs_node_key_ptr_offset(src, src_nritems - push_items),
push_items * sizeof(struct btrfs_key_ptr));
btrfs_set_header_nritems(src, src_nritems - push_items);
btrfs_set_header_nritems(dst, dst_nritems + push_items);
btrfs_mark_buffer_dirty(trans, src);
btrfs_mark_buffer_dirty(trans, dst);
return ret;
}
/*
* helper function to insert a new root level in the tree.
* A new node is allocated, and a single item is inserted to
* point to the existing root
*
* returns zero on success or < 0 on failure.
*/
static noinline int insert_new_root(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, int level)
{
u64 lower_gen;
struct extent_buffer *lower;
struct extent_buffer *c;
struct extent_buffer *old;
struct btrfs_disk_key lower_key;
int ret;
BUG_ON(path->nodes[level]);
BUG_ON(path->nodes[level-1] != root->node);
lower = path->nodes[level-1];
if (level == 1)
btrfs_item_key(lower, &lower_key, 0);
else
btrfs_node_key(lower, &lower_key, 0);
btrfs: rework chunk allocation to avoid exhaustion of the system chunk array Commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations") fixed a problem that resulted in exhausting the system chunk array in the superblock when there are many tasks allocating chunks in parallel. Basically too many tasks enter the first phase of chunk allocation without previous tasks having finished their second phase of allocation, resulting in too many system chunks being allocated. That was originally observed when running the fallocate tests of stress-ng on a PowerPC machine, using a node size of 64K. However that commit also introduced a deadlock where a task in phase 1 of the chunk allocation waited for another task that had allocated a system chunk to finish its phase 2, but that other task was waiting on an extent buffer lock held by the first task, therefore resulting in both tasks not making any progress. That change was later reverted by a patch with the subject "btrfs: fix deadlock with concurrent chunk allocations involving system chunks", since there is no simple and short solution to address it and the deadlock is relatively easy to trigger on zoned filesystems, while the system chunk array exhaustion is not so common. This change reworks the chunk allocation to avoid the system chunk array exhaustion. It accomplishes that by making the first phase of chunk allocation do the updates of the device items in the chunk btree and the insertion of the new chunk item in the chunk btree. This is done while under the protection of the chunk mutex (fs_info->chunk_mutex), in the same critical section that checks for available system space, allocates a new system chunk if needed and reserves system chunk space. This way we do not have chunk space reserved until the second phase completes. The same logic is applied to chunk removal as well, since it keeps reserved system space long after it is done updating the chunk btree. For direct allocation of system chunks, the previous behaviour remains, because otherwise we would deadlock on extent buffers of the chunk btree. Changes to the chunk btree are by large done by chunk allocation and chunk removal, which first reserve chunk system space and then later do changes to the chunk btree. The other remaining cases are uncommon and correspond to adding a device, removing a device and resizing a device. All these other cases do not pre-reserve system space, they modify the chunk btree right away, so they don't hold reserved space for a long period like chunk allocation and chunk removal do. The diff of this change is huge, but more than half of it is just addition of comments describing both how things work regarding chunk allocation and removal, including both the new behavior and the parts of the old behavior that did not change. CC: stable@vger.kernel.org # 5.12+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-29 13:43:06 +00:00
c = btrfs_alloc_tree_block(trans, root, 0, root->root_key.objectid,
&lower_key, level, root->node->start, 0,
btrfs: qgroup: track metadata relocation COW with simple quota Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22 00:37:23 +00:00
0, BTRFS_NESTING_NEW_ROOT);
if (IS_ERR(c))
return PTR_ERR(c);
root_add_used_bytes(root);
btrfs_set_header_nritems(c, 1);
btrfs_set_node_key(c, &lower_key, 0);
btrfs_set_node_blockptr(c, 0, lower->start);
lower_gen = btrfs_header_generation(lower);
WARN_ON(lower_gen != trans->transid);
btrfs_set_node_ptr_generation(c, 0, lower_gen);
btrfs_mark_buffer_dirty(trans, c);
old = root->node;
ret = btrfs_tree_mod_log_insert_root(root->node, c, false);
if (ret < 0) {
btrfs_free_tree_block(trans, btrfs_root_id(root), c, 0, 1);
btrfs_tree_unlock(c);
free_extent_buffer(c);
return ret;
}
rcu_assign_pointer(root->node, c);
/* the super has an extra ref to root->node */
free_extent_buffer(old);
add_root_to_dirty_list(root);
atomic_inc(&c->refs);
path->nodes[level] = c;
path->locks[level] = BTRFS_WRITE_LOCK;
path->slots[level] = 0;
return 0;
}
/*
* worker function to insert a single pointer in a node.
* the node should have enough room for the pointer already
*
* slot and level indicate where you want the key to go, and
* blocknr is the block the key points to.
*/
static int insert_ptr(struct btrfs_trans_handle *trans,
struct btrfs_path *path,
struct btrfs_disk_key *key, u64 bytenr,
int slot, int level)
{
struct extent_buffer *lower;
int nritems;
int ret;
BUG_ON(!path->nodes[level]);
btrfs_assert_tree_write_locked(path->nodes[level]);
lower = path->nodes[level];
nritems = btrfs_header_nritems(lower);
BUG_ON(slot > nritems);
BUG_ON(nritems == BTRFS_NODEPTRS_PER_BLOCK(trans->fs_info));
if (slot != nritems) {
if (level) {
ret = btrfs_tree_mod_log_insert_move(lower, slot + 1,
slot, nritems - slot);
if (ret < 0) {
btrfs_abort_transaction(trans, ret);
return ret;
}
}
memmove_extent_buffer(lower,
btrfs_node_key_ptr_offset(lower, slot + 1),
btrfs_node_key_ptr_offset(lower, slot),
(nritems - slot) * sizeof(struct btrfs_key_ptr));
}
if (level) {
ret = btrfs_tree_mod_log_insert_key(lower, slot,
BTRFS_MOD_LOG_KEY_ADD);
if (ret < 0) {
btrfs_abort_transaction(trans, ret);
return ret;
}
}
btrfs_set_node_key(lower, key, slot);
btrfs_set_node_blockptr(lower, slot, bytenr);
WARN_ON(trans->transid == 0);
btrfs_set_node_ptr_generation(lower, slot, trans->transid);
btrfs_set_header_nritems(lower, nritems + 1);
btrfs_mark_buffer_dirty(trans, lower);
return 0;
}
/*
* split the node at the specified level in path in two.
* The path is corrected to point to the appropriate node after the split
*
* Before splitting this tries to make some room in the node by pushing
* left and right, if either one works, it returns right away.
*
* returns 0 on success and < 0 on failure
*/
static noinline int split_node(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, int level)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *c;
struct extent_buffer *split;
struct btrfs_disk_key disk_key;
int mid;
int ret;
u32 c_nritems;
c = path->nodes[level];
WARN_ON(btrfs_header_generation(c) != trans->transid);
if (c == root->node) {
/*
* trying to split the root, lets make a new one
*
* tree mod log: We don't log_removal old root in
* insert_new_root, because that root buffer will be kept as a
* normal node. We are going to log removal of half of the
* elements below with btrfs_tree_mod_log_eb_copy(). We're
* holding a tree lock on the buffer, which is why we cannot
* race with other tree_mod_log users.
*/
ret = insert_new_root(trans, root, path, level + 1);
if (ret)
return ret;
} else {
ret = push_nodes_for_insert(trans, root, path, level);
c = path->nodes[level];
if (!ret && btrfs_header_nritems(c) <
BTRFS_NODEPTRS_PER_BLOCK(fs_info) - 3)
return 0;
if (ret < 0)
return ret;
}
c_nritems = btrfs_header_nritems(c);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
mid = (c_nritems + 1) / 2;
btrfs_node_key(c, &disk_key, mid);
btrfs: rework chunk allocation to avoid exhaustion of the system chunk array Commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations") fixed a problem that resulted in exhausting the system chunk array in the superblock when there are many tasks allocating chunks in parallel. Basically too many tasks enter the first phase of chunk allocation without previous tasks having finished their second phase of allocation, resulting in too many system chunks being allocated. That was originally observed when running the fallocate tests of stress-ng on a PowerPC machine, using a node size of 64K. However that commit also introduced a deadlock where a task in phase 1 of the chunk allocation waited for another task that had allocated a system chunk to finish its phase 2, but that other task was waiting on an extent buffer lock held by the first task, therefore resulting in both tasks not making any progress. That change was later reverted by a patch with the subject "btrfs: fix deadlock with concurrent chunk allocations involving system chunks", since there is no simple and short solution to address it and the deadlock is relatively easy to trigger on zoned filesystems, while the system chunk array exhaustion is not so common. This change reworks the chunk allocation to avoid the system chunk array exhaustion. It accomplishes that by making the first phase of chunk allocation do the updates of the device items in the chunk btree and the insertion of the new chunk item in the chunk btree. This is done while under the protection of the chunk mutex (fs_info->chunk_mutex), in the same critical section that checks for available system space, allocates a new system chunk if needed and reserves system chunk space. This way we do not have chunk space reserved until the second phase completes. The same logic is applied to chunk removal as well, since it keeps reserved system space long after it is done updating the chunk btree. For direct allocation of system chunks, the previous behaviour remains, because otherwise we would deadlock on extent buffers of the chunk btree. Changes to the chunk btree are by large done by chunk allocation and chunk removal, which first reserve chunk system space and then later do changes to the chunk btree. The other remaining cases are uncommon and correspond to adding a device, removing a device and resizing a device. All these other cases do not pre-reserve system space, they modify the chunk btree right away, so they don't hold reserved space for a long period like chunk allocation and chunk removal do. The diff of this change is huge, but more than half of it is just addition of comments describing both how things work regarding chunk allocation and removal, including both the new behavior and the parts of the old behavior that did not change. CC: stable@vger.kernel.org # 5.12+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-29 13:43:06 +00:00
split = btrfs_alloc_tree_block(trans, root, 0, root->root_key.objectid,
&disk_key, level, c->start, 0,
btrfs: qgroup: track metadata relocation COW with simple quota Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22 00:37:23 +00:00
0, BTRFS_NESTING_SPLIT);
if (IS_ERR(split))
return PTR_ERR(split);
root_add_used_bytes(root);
ASSERT(btrfs_header_level(c) == level);
ret = btrfs_tree_mod_log_eb_copy(split, c, 0, mid, c_nritems - mid);
Btrfs: fix tree mod logging While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-20 15:17:46 +00:00
if (ret) {
btrfs_tree_unlock(split);
free_extent_buffer(split);
btrfs_abort_transaction(trans, ret);
Btrfs: fix tree mod logging While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-20 15:17:46 +00:00
return ret;
}
copy_extent_buffer(split, c,
btrfs_node_key_ptr_offset(split, 0),
btrfs_node_key_ptr_offset(c, mid),
(c_nritems - mid) * sizeof(struct btrfs_key_ptr));
btrfs_set_header_nritems(split, c_nritems - mid);
btrfs_set_header_nritems(c, mid);
btrfs_mark_buffer_dirty(trans, c);
btrfs_mark_buffer_dirty(trans, split);
ret = insert_ptr(trans, path, &disk_key, split->start,
path->slots[level + 1] + 1, level + 1);
if (ret < 0) {
btrfs_tree_unlock(split);
free_extent_buffer(split);
return ret;
}
if (path->slots[level] >= mid) {
path->slots[level] -= mid;
btrfs_tree_unlock(c);
free_extent_buffer(c);
path->nodes[level] = split;
path->slots[level + 1] += 1;
} else {
btrfs_tree_unlock(split);
free_extent_buffer(split);
}
return 0;
}
/*
* how many bytes are required to store the items in a leaf. start
* and nr indicate which items in the leaf to check. This totals up the
* space used both by the item structs and the item data
*/
static int leaf_space_used(const struct extent_buffer *l, int start, int nr)
{
int data_len;
int nritems = btrfs_header_nritems(l);
int end = min(nritems, start + nr) - 1;
if (!nr)
return 0;
data_len = btrfs_item_offset(l, start) + btrfs_item_size(l, start);
data_len = data_len - btrfs_item_offset(l, end);
data_len += sizeof(struct btrfs_item) * nr;
WARN_ON(data_len < 0);
return data_len;
}
/*
* The space between the end of the leaf items and
* the start of the leaf data. IOW, how much room
* the leaf has left for both items and data
*/
int btrfs_leaf_free_space(const struct extent_buffer *leaf)
{
struct btrfs_fs_info *fs_info = leaf->fs_info;
int nritems = btrfs_header_nritems(leaf);
int ret;
ret = BTRFS_LEAF_DATA_SIZE(fs_info) - leaf_space_used(leaf, 0, nritems);
if (ret < 0) {
btrfs_crit(fs_info,
"leaf free space ret %d, leaf data size %lu, used %d nritems %d",
ret,
(unsigned long) BTRFS_LEAF_DATA_SIZE(fs_info),
leaf_space_used(leaf, 0, nritems), nritems);
}
return ret;
}
/*
* min slot controls the lowest index we're willing to push to the
* right. We'll push up to and including min_slot, but no lower
*/
static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
struct btrfs_path *path,
int data_size, int empty,
struct extent_buffer *right,
int free_space, u32 left_nritems,
u32 min_slot)
{
struct btrfs_fs_info *fs_info = right->fs_info;
struct extent_buffer *left = path->nodes[0];
struct extent_buffer *upper = path->nodes[1];
struct btrfs_map_token token;
struct btrfs_disk_key disk_key;
int slot;
u32 i;
int push_space = 0;
int push_items = 0;
u32 nr;
u32 right_nritems;
u32 data_end;
u32 this_item_size;
if (empty)
nr = 0;
else
nr = max_t(u32, 1, min_slot);
if (path->slots[0] >= left_nritems)
push_space += data_size;
slot = path->slots[1];
i = left_nritems - 1;
while (i >= nr) {
if (!empty && push_items > 0) {
if (path->slots[0] > i)
break;
if (path->slots[0] == i) {
int space = btrfs_leaf_free_space(left);
if (space + push_space * 2 > free_space)
break;
}
}
if (path->slots[0] == i)
push_space += data_size;
this_item_size = btrfs_item_size(left, i);
if (this_item_size + sizeof(struct btrfs_item) +
push_space > free_space)
break;
push_items++;
push_space += this_item_size + sizeof(struct btrfs_item);
if (i == 0)
break;
i--;
}
if (push_items == 0)
goto out_unlock;
WARN_ON(!empty && push_items == left_nritems);
/* push left to right */
right_nritems = btrfs_header_nritems(right);
push_space = btrfs_item_data_end(left, left_nritems - push_items);
push_space -= leaf_data_end(left);
/* make room in the right data area */
data_end = leaf_data_end(right);
memmove_leaf_data(right, data_end - push_space, data_end,
BTRFS_LEAF_DATA_SIZE(fs_info) - data_end);
/* copy from the left data area */
copy_leaf_data(right, left, BTRFS_LEAF_DATA_SIZE(fs_info) - push_space,
leaf_data_end(left), push_space);
memmove_leaf_items(right, push_items, 0, right_nritems);
/* copy the items from left to right */
copy_leaf_items(right, left, 0, left_nritems - push_items, push_items);
/* update the item pointers */
btrfs_init_map_token(&token, right);
right_nritems += push_items;
btrfs_set_header_nritems(right, right_nritems);
push_space = BTRFS_LEAF_DATA_SIZE(fs_info);
for (i = 0; i < right_nritems; i++) {
push_space -= btrfs_token_item_size(&token, i);
btrfs_set_token_item_offset(&token, i, push_space);
}
left_nritems -= push_items;
btrfs_set_header_nritems(left, left_nritems);
if (left_nritems)
btrfs_mark_buffer_dirty(trans, left);
else
btrfs_clear_buffer_dirty(trans, left);
btrfs_mark_buffer_dirty(trans, right);
btrfs_item_key(right, &disk_key, 0);
btrfs_set_node_key(upper, &disk_key, slot + 1);
btrfs_mark_buffer_dirty(trans, upper);
/* then fixup the leaf pointer in the path */
if (path->slots[0] >= left_nritems) {
path->slots[0] -= left_nritems;
if (btrfs_header_nritems(path->nodes[0]) == 0)
btrfs_clear_buffer_dirty(trans, path->nodes[0]);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
path->slots[1] += 1;
} else {
btrfs_tree_unlock(right);
free_extent_buffer(right);
}
return 0;
out_unlock:
btrfs_tree_unlock(right);
free_extent_buffer(right);
return 1;
}
/*
* push some data in the path leaf to the right, trying to free up at
* least data_size bytes. returns zero if the push worked, nonzero otherwise
*
* returns 1 if the push failed because the other node didn't have enough
* room, 0 if everything worked out and < 0 if there were major errors.
*
* this will push starting from min_slot to the end of the leaf. It won't
* push any slot lower than min_slot
*/
static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
*root, struct btrfs_path *path,
int min_data_size, int data_size,
int empty, u32 min_slot)
{
struct extent_buffer *left = path->nodes[0];
struct extent_buffer *right;
struct extent_buffer *upper;
int slot;
int free_space;
u32 left_nritems;
int ret;
if (!path->nodes[1])
return 1;
slot = path->slots[1];
upper = path->nodes[1];
if (slot >= btrfs_header_nritems(upper) - 1)
return 1;
btrfs_assert_tree_write_locked(path->nodes[1]);
right = btrfs_read_node_slot(upper, slot + 1);
if (IS_ERR(right))
return PTR_ERR(right);
btrfs_tree_lock_nested(right, BTRFS_NESTING_RIGHT);
free_space = btrfs_leaf_free_space(right);
if (free_space < data_size)
goto out_unlock;
ret = btrfs_cow_block(trans, root, right, upper,
slot + 1, &right, BTRFS_NESTING_RIGHT_COW);
if (ret)
goto out_unlock;
left_nritems = btrfs_header_nritems(left);
if (left_nritems == 0)
goto out_unlock;
btrfs: ctree: check key order before merging tree blocks [BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833 Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-19 06:35:50 +00:00
if (check_sibling_keys(left, right)) {
ret = -EUCLEAN;
btrfs_abort_transaction(trans, ret);
btrfs: ctree: check key order before merging tree blocks [BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833 Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-19 06:35:50 +00:00
btrfs_tree_unlock(right);
free_extent_buffer(right);
return ret;
}
Btrfs: more efficient push_leaf_right Currently when finding the leaf to insert a key into a btree, if the leaf doesn't have enough space to store the item we attempt to move off some items from our leaf to its right neighbor leaf, and if this fails to create enough free space in our leaf, we try to move off more items to the left neighbor leaf as well. When trying to move off items to the right neighbor leaf, if it has enough room to store the new key but not not enough room to move off at least one item from our target leaf, __push_leaf_right returns 1 and we have to attempt to move items to the left neighbor (push_leaf_left function) without touching the right neighbor leaf. For the case where the right leaf has enough room to store at least 1 item from our leaf, we end up modifying (and dirtying) both our leaf and the right leaf. This is non-optimal for the case where the new key is greater than any key in our target leaf because it can be inserted at slot 0 of the right neighbor leaf and we don't need to touch our leaf at all nor to attempt to move off items to the left neighbor leaf. Therefore this change just selects the right neighbor leaf as our new target leaf if it has enough room for the new key without modifying our initial target leaf - we do this only if the new key is higher than any key in the initial target leaf. While running the following test, push_leaf_right was called by split_leaf 4802 times. Out of those 4802 calls, for 2571 calls (53.5%) we hit this special case (right leaf has enough room and new key is higher than any key in the initial target leaf). Test: sysbench --test=fileio --file-num=512 --file-total-size=5G \ --file-test-mode=[seqwr|rndwr] --num-threads=512 --file-block-size=8192 \ --max-requests=100000 --file-io-mode=sync [prepare|run] Results: sequential writes Throughput before this change: 65.71Mb/sec (average of 10 runs) Throughput after this change: 66.58Mb/sec (average of 10 runs) random writes Throughput before this change: 10.75Mb/sec (average of 10 runs) Throughput after this change: 11.56Mb/sec (average of 10 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-04 22:17:39 +00:00
if (path->slots[0] == left_nritems && !empty) {
/* Key greater than all keys in the leaf, right neighbor has
* enough room for it and we're not emptying our leaf to delete
* it, therefore use right neighbor to insert the new item and
* no need to touch/dirty our left leaf. */
Btrfs: more efficient push_leaf_right Currently when finding the leaf to insert a key into a btree, if the leaf doesn't have enough space to store the item we attempt to move off some items from our leaf to its right neighbor leaf, and if this fails to create enough free space in our leaf, we try to move off more items to the left neighbor leaf as well. When trying to move off items to the right neighbor leaf, if it has enough room to store the new key but not not enough room to move off at least one item from our target leaf, __push_leaf_right returns 1 and we have to attempt to move items to the left neighbor (push_leaf_left function) without touching the right neighbor leaf. For the case where the right leaf has enough room to store at least 1 item from our leaf, we end up modifying (and dirtying) both our leaf and the right leaf. This is non-optimal for the case where the new key is greater than any key in our target leaf because it can be inserted at slot 0 of the right neighbor leaf and we don't need to touch our leaf at all nor to attempt to move off items to the left neighbor leaf. Therefore this change just selects the right neighbor leaf as our new target leaf if it has enough room for the new key without modifying our initial target leaf - we do this only if the new key is higher than any key in the initial target leaf. While running the following test, push_leaf_right was called by split_leaf 4802 times. Out of those 4802 calls, for 2571 calls (53.5%) we hit this special case (right leaf has enough room and new key is higher than any key in the initial target leaf). Test: sysbench --test=fileio --file-num=512 --file-total-size=5G \ --file-test-mode=[seqwr|rndwr] --num-threads=512 --file-block-size=8192 \ --max-requests=100000 --file-io-mode=sync [prepare|run] Results: sequential writes Throughput before this change: 65.71Mb/sec (average of 10 runs) Throughput after this change: 66.58Mb/sec (average of 10 runs) random writes Throughput before this change: 10.75Mb/sec (average of 10 runs) Throughput after this change: 11.56Mb/sec (average of 10 runs) Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-04 22:17:39 +00:00
btrfs_tree_unlock(left);
free_extent_buffer(left);
path->nodes[0] = right;
path->slots[0] = 0;
path->slots[1]++;
return 0;
}
return __push_leaf_right(trans, path, min_data_size, empty, right,
free_space, left_nritems, min_slot);
out_unlock:
btrfs_tree_unlock(right);
free_extent_buffer(right);
return 1;
}
/*
* push some data in the path leaf to the left, trying to free up at
* least data_size bytes. returns zero if the push worked, nonzero otherwise
*
* max_slot can put a limit on how far into the leaf we'll push items. The
* item at 'max_slot' won't be touched. Use (u32)-1 to make us do all the
* items
*/
static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
struct btrfs_path *path, int data_size,
int empty, struct extent_buffer *left,
int free_space, u32 right_nritems,
u32 max_slot)
{
struct btrfs_fs_info *fs_info = left->fs_info;
struct btrfs_disk_key disk_key;
struct extent_buffer *right = path->nodes[0];
int i;
int push_space = 0;
int push_items = 0;
u32 old_left_nritems;
u32 nr;
int ret = 0;
u32 this_item_size;
u32 old_left_item_size;
struct btrfs_map_token token;
if (empty)
nr = min(right_nritems, max_slot);
else
nr = min(right_nritems - 1, max_slot);
for (i = 0; i < nr; i++) {
if (!empty && push_items > 0) {
if (path->slots[0] < i)
break;
if (path->slots[0] == i) {
int space = btrfs_leaf_free_space(right);
if (space + push_space * 2 > free_space)
break;
}
}
if (path->slots[0] == i)
push_space += data_size;
this_item_size = btrfs_item_size(right, i);
if (this_item_size + sizeof(struct btrfs_item) + push_space >
free_space)
break;
push_items++;
push_space += this_item_size + sizeof(struct btrfs_item);
}
if (push_items == 0) {
ret = 1;
goto out;
}
WARN_ON(!empty && push_items == btrfs_header_nritems(right));
/* push data from right to left */
copy_leaf_items(left, right, btrfs_header_nritems(left), 0, push_items);
push_space = BTRFS_LEAF_DATA_SIZE(fs_info) -
btrfs_item_offset(right, push_items - 1);
copy_leaf_data(left, right, leaf_data_end(left) - push_space,
btrfs_item_offset(right, push_items - 1), push_space);
old_left_nritems = btrfs_header_nritems(left);
BUG_ON(old_left_nritems <= 0);
btrfs_init_map_token(&token, left);
old_left_item_size = btrfs_item_offset(left, old_left_nritems - 1);
for (i = old_left_nritems; i < old_left_nritems + push_items; i++) {
u32 ioff;
ioff = btrfs_token_item_offset(&token, i);
btrfs_set_token_item_offset(&token, i,
ioff - (BTRFS_LEAF_DATA_SIZE(fs_info) - old_left_item_size));
}
btrfs_set_header_nritems(left, old_left_nritems + push_items);
/* fixup right node */
if (push_items > right_nritems)
WARN(1, KERN_CRIT "push items %d nr %u\n", push_items,
right_nritems);
if (push_items < right_nritems) {
push_space = btrfs_item_offset(right, push_items - 1) -
leaf_data_end(right);
memmove_leaf_data(right,
BTRFS_LEAF_DATA_SIZE(fs_info) - push_space,
leaf_data_end(right), push_space);
memmove_leaf_items(right, 0, push_items,
btrfs_header_nritems(right) - push_items);
}
btrfs_init_map_token(&token, right);
right_nritems -= push_items;
btrfs_set_header_nritems(right, right_nritems);
push_space = BTRFS_LEAF_DATA_SIZE(fs_info);
for (i = 0; i < right_nritems; i++) {
push_space = push_space - btrfs_token_item_size(&token, i);
btrfs_set_token_item_offset(&token, i, push_space);
}
btrfs_mark_buffer_dirty(trans, left);
if (right_nritems)
btrfs_mark_buffer_dirty(trans, right);
else
btrfs_clear_buffer_dirty(trans, right);
btrfs_item_key(right, &disk_key, 0);
fixup_low_keys(trans, path, &disk_key, 1);
/* then fixup the leaf pointer in the path */
if (path->slots[0] < push_items) {
path->slots[0] += old_left_nritems;
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = left;
path->slots[1] -= 1;
} else {
btrfs_tree_unlock(left);
free_extent_buffer(left);
path->slots[0] -= push_items;
}
BUG_ON(path->slots[0] < 0);
return ret;
out:
btrfs_tree_unlock(left);
free_extent_buffer(left);
return ret;
}
/*
* push some data in the path leaf to the left, trying to free up at
* least data_size bytes. returns zero if the push worked, nonzero otherwise
*
* max_slot can put a limit on how far into the leaf we'll push items. The
* item at 'max_slot' won't be touched. Use (u32)-1 to make us push all the
* items
*/
static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
*root, struct btrfs_path *path, int min_data_size,
int data_size, int empty, u32 max_slot)
{
struct extent_buffer *right = path->nodes[0];
struct extent_buffer *left;
int slot;
int free_space;
u32 right_nritems;
int ret = 0;
slot = path->slots[1];
if (slot == 0)
return 1;
if (!path->nodes[1])
return 1;
right_nritems = btrfs_header_nritems(right);
if (right_nritems == 0)
return 1;
btrfs_assert_tree_write_locked(path->nodes[1]);
left = btrfs_read_node_slot(path->nodes[1], slot - 1);
if (IS_ERR(left))
return PTR_ERR(left);
btrfs_tree_lock_nested(left, BTRFS_NESTING_LEFT);
free_space = btrfs_leaf_free_space(left);
if (free_space < data_size) {
ret = 1;
goto out;
}
ret = btrfs_cow_block(trans, root, left,
path->nodes[1], slot - 1, &left,
BTRFS_NESTING_LEFT_COW);
if (ret) {
/* we hit -ENOSPC, but it isn't fatal here */
if (ret == -ENOSPC)
ret = 1;
goto out;
}
btrfs: ctree: check key order before merging tree blocks [BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833 Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-19 06:35:50 +00:00
if (check_sibling_keys(left, right)) {
ret = -EUCLEAN;
btrfs_abort_transaction(trans, ret);
btrfs: ctree: check key order before merging tree blocks [BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833 Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-19 06:35:50 +00:00
goto out;
}
return __push_leaf_left(trans, path, min_data_size, empty, left,
free_space, right_nritems, max_slot);
out:
btrfs_tree_unlock(left);
free_extent_buffer(left);
return ret;
}
/*
* split the path's leaf in two, making sure there is at least data_size
* available for the resulting leaf level of the path.
*/
static noinline int copy_for_split(struct btrfs_trans_handle *trans,
struct btrfs_path *path,
struct extent_buffer *l,
struct extent_buffer *right,
int slot, int mid, int nritems)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
int data_copy_size;
int rt_data_off;
int i;
int ret;
struct btrfs_disk_key disk_key;
struct btrfs_map_token token;
nritems = nritems - mid;
btrfs_set_header_nritems(right, nritems);
data_copy_size = btrfs_item_data_end(l, mid) - leaf_data_end(l);
copy_leaf_items(right, l, 0, mid, nritems);
copy_leaf_data(right, l, BTRFS_LEAF_DATA_SIZE(fs_info) - data_copy_size,
leaf_data_end(l), data_copy_size);
rt_data_off = BTRFS_LEAF_DATA_SIZE(fs_info) - btrfs_item_data_end(l, mid);
btrfs_init_map_token(&token, right);
for (i = 0; i < nritems; i++) {
u32 ioff;
ioff = btrfs_token_item_offset(&token, i);
btrfs_set_token_item_offset(&token, i, ioff + rt_data_off);
}
btrfs_set_header_nritems(l, mid);
btrfs_item_key(right, &disk_key, 0);
ret = insert_ptr(trans, path, &disk_key, right->start, path->slots[1] + 1, 1);
if (ret < 0)
return ret;
btrfs_mark_buffer_dirty(trans, right);
btrfs_mark_buffer_dirty(trans, l);
BUG_ON(path->slots[0] != slot);
if (mid <= slot) {
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
path->slots[0] -= mid;
path->slots[1] += 1;
} else {
btrfs_tree_unlock(right);
free_extent_buffer(right);
}
BUG_ON(path->slots[0] < 0);
return 0;
}
/*
* double splits happen when we need to insert a big item in the middle
* of a leaf. A double split can leave us with 3 mostly empty leaves:
* leaf: [ slots 0 - N] [ our target ] [ N + 1 - total in leaf ]
* A B C
*
* We avoid this by trying to push the items on either side of our target
* into the adjacent leaves. If all goes well we can avoid the double split
* completely.
*/
static noinline int push_for_double_split(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
int data_size)
{
int ret;
int progress = 0;
int slot;
u32 nritems;
int space_needed = data_size;
slot = path->slots[0];
if (slot < btrfs_header_nritems(path->nodes[0]))
space_needed -= btrfs_leaf_free_space(path->nodes[0]);
/*
* try to push all the items after our slot into the
* right leaf
*/
ret = push_leaf_right(trans, root, path, 1, space_needed, 0, slot);
if (ret < 0)
return ret;
if (ret == 0)
progress++;
nritems = btrfs_header_nritems(path->nodes[0]);
/*
* our goal is to get our slot at the start or end of a leaf. If
* we've done so we're done
*/
if (path->slots[0] == 0 || path->slots[0] == nritems)
return 0;
if (btrfs_leaf_free_space(path->nodes[0]) >= data_size)
return 0;
/* try to push all the items before our slot into the next leaf */
slot = path->slots[0];
space_needed = data_size;
if (slot > 0)
space_needed -= btrfs_leaf_free_space(path->nodes[0]);
ret = push_leaf_left(trans, root, path, 1, space_needed, 0, slot);
if (ret < 0)
return ret;
if (ret == 0)
progress++;
if (progress)
return 0;
return 1;
}
/*
* split the path's leaf in two, making sure there is at least data_size
* available for the resulting leaf level of the path.
*
* returns 0 if all went well and < 0 on failure.
*/
static noinline int split_leaf(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
const struct btrfs_key *ins_key,
struct btrfs_path *path, int data_size,
int extend)
{
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
struct btrfs_disk_key disk_key;
struct extent_buffer *l;
u32 nritems;
int mid;
int slot;
struct extent_buffer *right;
struct btrfs_fs_info *fs_info = root->fs_info;
int ret = 0;
int wret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
int split;
int num_doubles = 0;
int tried_avoid_double = 0;
l = path->nodes[0];
slot = path->slots[0];
if (extend && data_size + btrfs_item_size(l, slot) +
sizeof(struct btrfs_item) > BTRFS_LEAF_DATA_SIZE(fs_info))
return -EOVERFLOW;
/* first try to make some room by pushing left and right */
if (data_size && path->nodes[1]) {
int space_needed = data_size;
if (slot < btrfs_header_nritems(l))
space_needed -= btrfs_leaf_free_space(l);
wret = push_leaf_right(trans, root, path, space_needed,
space_needed, 0, 0);
if (wret < 0)
return wret;
if (wret) {
space_needed = data_size;
if (slot > 0)
space_needed -= btrfs_leaf_free_space(l);
wret = push_leaf_left(trans, root, path, space_needed,
space_needed, 0, (u32)-1);
if (wret < 0)
return wret;
}
l = path->nodes[0];
/* did the pushes work? */
if (btrfs_leaf_free_space(l) >= data_size)
return 0;
}
if (!path->nodes[1]) {
ret = insert_new_root(trans, root, path, 1);
if (ret)
return ret;
}
again:
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
split = 1;
l = path->nodes[0];
slot = path->slots[0];
nritems = btrfs_header_nritems(l);
mid = (nritems + 1) / 2;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (mid <= slot) {
if (nritems == 1 ||
leaf_space_used(l, mid, nritems - mid) + data_size >
BTRFS_LEAF_DATA_SIZE(fs_info)) {
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (slot >= nritems) {
split = 0;
} else {
mid = slot;
if (mid != nritems &&
leaf_space_used(l, mid, nritems - mid) +
data_size > BTRFS_LEAF_DATA_SIZE(fs_info)) {
if (data_size && !tried_avoid_double)
goto push_for_double;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
split = 2;
}
}
}
} else {
if (leaf_space_used(l, 0, mid) + data_size >
BTRFS_LEAF_DATA_SIZE(fs_info)) {
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (!extend && data_size && slot == 0) {
split = 0;
} else if ((extend || !data_size) && slot == 0) {
mid = 1;
} else {
mid = slot;
if (mid != nritems &&
leaf_space_used(l, mid, nritems - mid) +
data_size > BTRFS_LEAF_DATA_SIZE(fs_info)) {
if (data_size && !tried_avoid_double)
goto push_for_double;
split = 2;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
}
}
}
}
if (split == 0)
btrfs_cpu_key_to_disk(&disk_key, ins_key);
else
btrfs_item_key(l, &disk_key, mid);
/*
* We have to about BTRFS_NESTING_NEW_ROOT here if we've done a double
* split, because we're only allowed to have MAX_LOCKDEP_SUBCLASSES
* subclasses, which is 8 at the time of this patch, and we've maxed it
* out. In the future we could add a
* BTRFS_NESTING_SPLIT_THE_SPLITTENING if we need to, but for now just
* use BTRFS_NESTING_NEW_ROOT.
*/
btrfs: rework chunk allocation to avoid exhaustion of the system chunk array Commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations") fixed a problem that resulted in exhausting the system chunk array in the superblock when there are many tasks allocating chunks in parallel. Basically too many tasks enter the first phase of chunk allocation without previous tasks having finished their second phase of allocation, resulting in too many system chunks being allocated. That was originally observed when running the fallocate tests of stress-ng on a PowerPC machine, using a node size of 64K. However that commit also introduced a deadlock where a task in phase 1 of the chunk allocation waited for another task that had allocated a system chunk to finish its phase 2, but that other task was waiting on an extent buffer lock held by the first task, therefore resulting in both tasks not making any progress. That change was later reverted by a patch with the subject "btrfs: fix deadlock with concurrent chunk allocations involving system chunks", since there is no simple and short solution to address it and the deadlock is relatively easy to trigger on zoned filesystems, while the system chunk array exhaustion is not so common. This change reworks the chunk allocation to avoid the system chunk array exhaustion. It accomplishes that by making the first phase of chunk allocation do the updates of the device items in the chunk btree and the insertion of the new chunk item in the chunk btree. This is done while under the protection of the chunk mutex (fs_info->chunk_mutex), in the same critical section that checks for available system space, allocates a new system chunk if needed and reserves system chunk space. This way we do not have chunk space reserved until the second phase completes. The same logic is applied to chunk removal as well, since it keeps reserved system space long after it is done updating the chunk btree. For direct allocation of system chunks, the previous behaviour remains, because otherwise we would deadlock on extent buffers of the chunk btree. Changes to the chunk btree are by large done by chunk allocation and chunk removal, which first reserve chunk system space and then later do changes to the chunk btree. The other remaining cases are uncommon and correspond to adding a device, removing a device and resizing a device. All these other cases do not pre-reserve system space, they modify the chunk btree right away, so they don't hold reserved space for a long period like chunk allocation and chunk removal do. The diff of this change is huge, but more than half of it is just addition of comments describing both how things work regarding chunk allocation and removal, including both the new behavior and the parts of the old behavior that did not change. CC: stable@vger.kernel.org # 5.12+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-29 13:43:06 +00:00
right = btrfs_alloc_tree_block(trans, root, 0, root->root_key.objectid,
btrfs: qgroup: track metadata relocation COW with simple quota Relocation COWs metadata blocks in two cases for the reloc root: - copying the subvolume root item when creating the reloc root - copying a btree node when there is a COW during relocation In both cases, the resulting btree node hits an abnormal code path with respect to the owner field in its btrfs_header. It first creates the root item for the new objectid, which populates the reloc root id, and it at this point that delayed refs are created. Later, it fully copies the old node into the new node (including the original owner field) which overwrites it. This results in a simple quotas mismatch where we run the delayed ref for the reloc root which has no simple quota effect (reloc root is not an fstree) but when we ultimately delete the node, the owner is the real original fstree and we do free the space. To work around this without tampering with the behavior of relocation, add a parameter to btrfs_add_tree_block that lets the relocation code path specify a different owning root than the "operating" root (in this case, owning root is the real root and the operating root is the reloc root). These can naturally be plumbed into delayed refs that have the same concept. Note that this is a double count in some sense, but a relatively natural one, as there are really two extents, and the old one will be deleted soon. This is consistent with how data relocation extents are accounted by simple quotas. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22 00:37:23 +00:00
&disk_key, 0, l->start, 0, 0,
btrfs: rework chunk allocation to avoid exhaustion of the system chunk array Commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations") fixed a problem that resulted in exhausting the system chunk array in the superblock when there are many tasks allocating chunks in parallel. Basically too many tasks enter the first phase of chunk allocation without previous tasks having finished their second phase of allocation, resulting in too many system chunks being allocated. That was originally observed when running the fallocate tests of stress-ng on a PowerPC machine, using a node size of 64K. However that commit also introduced a deadlock where a task in phase 1 of the chunk allocation waited for another task that had allocated a system chunk to finish its phase 2, but that other task was waiting on an extent buffer lock held by the first task, therefore resulting in both tasks not making any progress. That change was later reverted by a patch with the subject "btrfs: fix deadlock with concurrent chunk allocations involving system chunks", since there is no simple and short solution to address it and the deadlock is relatively easy to trigger on zoned filesystems, while the system chunk array exhaustion is not so common. This change reworks the chunk allocation to avoid the system chunk array exhaustion. It accomplishes that by making the first phase of chunk allocation do the updates of the device items in the chunk btree and the insertion of the new chunk item in the chunk btree. This is done while under the protection of the chunk mutex (fs_info->chunk_mutex), in the same critical section that checks for available system space, allocates a new system chunk if needed and reserves system chunk space. This way we do not have chunk space reserved until the second phase completes. The same logic is applied to chunk removal as well, since it keeps reserved system space long after it is done updating the chunk btree. For direct allocation of system chunks, the previous behaviour remains, because otherwise we would deadlock on extent buffers of the chunk btree. Changes to the chunk btree are by large done by chunk allocation and chunk removal, which first reserve chunk system space and then later do changes to the chunk btree. The other remaining cases are uncommon and correspond to adding a device, removing a device and resizing a device. All these other cases do not pre-reserve system space, they modify the chunk btree right away, so they don't hold reserved space for a long period like chunk allocation and chunk removal do. The diff of this change is huge, but more than half of it is just addition of comments describing both how things work regarding chunk allocation and removal, including both the new behavior and the parts of the old behavior that did not change. CC: stable@vger.kernel.org # 5.12+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-29 13:43:06 +00:00
num_doubles ? BTRFS_NESTING_NEW_ROOT :
BTRFS_NESTING_SPLIT);
if (IS_ERR(right))
return PTR_ERR(right);
root_add_used_bytes(root);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (split == 0) {
if (mid <= slot) {
btrfs_set_header_nritems(right, 0);
ret = insert_ptr(trans, path, &disk_key,
right->start, path->slots[1] + 1, 1);
if (ret < 0) {
btrfs_tree_unlock(right);
free_extent_buffer(right);
return ret;
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
path->slots[0] = 0;
path->slots[1] += 1;
} else {
btrfs_set_header_nritems(right, 0);
ret = insert_ptr(trans, path, &disk_key,
right->start, path->slots[1], 1);
if (ret < 0) {
btrfs_tree_unlock(right);
free_extent_buffer(right);
return ret;
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
path->slots[0] = 0;
if (path->slots[1] == 0)
fixup_low_keys(trans, path, &disk_key, 1);
}
/*
* We create a new leaf 'right' for the required ins_len and
* we'll do btrfs_mark_buffer_dirty() on this leaf after copying
* the content of ins_len to 'right'.
*/
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
return ret;
}
ret = copy_for_split(trans, path, l, right, slot, mid, nritems);
if (ret < 0) {
btrfs_tree_unlock(right);
free_extent_buffer(right);
return ret;
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
if (split == 2) {
BUG_ON(num_doubles != 0);
num_doubles++;
goto again;
}
return 0;
push_for_double:
push_for_double_split(trans, root, path, data_size);
tried_avoid_double = 1;
if (btrfs_leaf_free_space(path->nodes[0]) >= data_size)
return 0;
goto again;
}
static noinline int setup_leaf_for_split(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, int ins_len)
{
struct btrfs_key key;
struct extent_buffer *leaf;
struct btrfs_file_extent_item *fi;
u64 extent_len = 0;
u32 item_size;
int ret;
leaf = path->nodes[0];
btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
BUG_ON(key.type != BTRFS_EXTENT_DATA_KEY &&
key.type != BTRFS_EXTENT_CSUM_KEY);
if (btrfs_leaf_free_space(leaf) >= ins_len)
return 0;
item_size = btrfs_item_size(leaf, path->slots[0]);
if (key.type == BTRFS_EXTENT_DATA_KEY) {
fi = btrfs_item_ptr(leaf, path->slots[0],
struct btrfs_file_extent_item);
extent_len = btrfs_file_extent_num_bytes(leaf, fi);
}
btrfs_release_path(path);
path->keep_locks = 1;
path->search_for_split = 1;
ret = btrfs_search_slot(trans, root, &key, path, 0, 1);
path->search_for_split = 0;
Btrfs: fix setup_leaf_for_split() to avoid leaf corruption We were incorrectly detecting when the target key didn't exist anymore after releasing the path and re-searching the tree. This could make us split or duplicate (btrfs_split_item() and btrfs_duplicate_item() are its only callers at the moment) an item when we should not. For the case of duplicating an item, we currently only duplicate checksum items (csum tree) and file extent items (fs/subvol trees). For the checksum items we end up overriding the item completely, but for file extent items we update only some of their fields in the copy (done in __btrfs_drop_extents), which means we can end up having a logical corruption for some values. Also for the case where we duplicate a file extent item it will make us produce a leaf with a wrong key order, as btrfs_duplicate_item() advances us to the next slot and then its caller sets a smaller key on the new item at that slot (like in __btrfs_drop_extents() e.g.). Alternatively if the tree search in setup_leaf_for_split() leaves with path->slots[0] == btrfs_header_nritems(path->nodes[0]), we end up accessing beyond the leaf's end (when we check if the item's size has changed) and make our caller insert an item at the invalid slot btrfs_header_nritems(path->nodes[0]) + 1, causing an invalid memory access if the leaf is full or nearly full. This issue has been present since the introduction of this function in 2009: Btrfs: Add btrfs_duplicate_item commit ad48fd754676bfae4139be1a897b1ea58f9aaf21 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-01-20 12:40:53 +00:00
if (ret > 0)
ret = -EAGAIN;
if (ret < 0)
goto err;
ret = -EAGAIN;
leaf = path->nodes[0];
Btrfs: fix setup_leaf_for_split() to avoid leaf corruption We were incorrectly detecting when the target key didn't exist anymore after releasing the path and re-searching the tree. This could make us split or duplicate (btrfs_split_item() and btrfs_duplicate_item() are its only callers at the moment) an item when we should not. For the case of duplicating an item, we currently only duplicate checksum items (csum tree) and file extent items (fs/subvol trees). For the checksum items we end up overriding the item completely, but for file extent items we update only some of their fields in the copy (done in __btrfs_drop_extents), which means we can end up having a logical corruption for some values. Also for the case where we duplicate a file extent item it will make us produce a leaf with a wrong key order, as btrfs_duplicate_item() advances us to the next slot and then its caller sets a smaller key on the new item at that slot (like in __btrfs_drop_extents() e.g.). Alternatively if the tree search in setup_leaf_for_split() leaves with path->slots[0] == btrfs_header_nritems(path->nodes[0]), we end up accessing beyond the leaf's end (when we check if the item's size has changed) and make our caller insert an item at the invalid slot btrfs_header_nritems(path->nodes[0]) + 1, causing an invalid memory access if the leaf is full or nearly full. This issue has been present since the introduction of this function in 2009: Btrfs: Add btrfs_duplicate_item commit ad48fd754676bfae4139be1a897b1ea58f9aaf21 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-01-20 12:40:53 +00:00
/* if our item isn't there, return now */
if (item_size != btrfs_item_size(leaf, path->slots[0]))
goto err;
/* the leaf has changed, it now has room. return now */
if (btrfs_leaf_free_space(path->nodes[0]) >= ins_len)
goto err;
if (key.type == BTRFS_EXTENT_DATA_KEY) {
fi = btrfs_item_ptr(leaf, path->slots[0],
struct btrfs_file_extent_item);
if (extent_len != btrfs_file_extent_num_bytes(leaf, fi))
goto err;
}
ret = split_leaf(trans, root, &key, path, ins_len, 1);
if (ret)
goto err;
path->keep_locks = 0;
btrfs_unlock_up_safe(path, 1);
return 0;
err:
path->keep_locks = 0;
return ret;
}
static noinline int split_item(struct btrfs_trans_handle *trans,
struct btrfs_path *path,
const struct btrfs_key *new_key,
unsigned long split_offset)
{
struct extent_buffer *leaf;
int orig_slot, slot;
char *buf;
u32 nritems;
u32 item_size;
u32 orig_offset;
struct btrfs_disk_key disk_key;
leaf = path->nodes[0];
/*
* Shouldn't happen because the caller must have previously called
* setup_leaf_for_split() to make room for the new item in the leaf.
*/
if (WARN_ON(btrfs_leaf_free_space(leaf) < sizeof(struct btrfs_item)))
return -ENOSPC;
orig_slot = path->slots[0];
orig_offset = btrfs_item_offset(leaf, path->slots[0]);
item_size = btrfs_item_size(leaf, path->slots[0]);
buf = kmalloc(item_size, GFP_NOFS);
if (!buf)
return -ENOMEM;
read_extent_buffer(leaf, buf, btrfs_item_ptr_offset(leaf,
path->slots[0]), item_size);
slot = path->slots[0] + 1;
nritems = btrfs_header_nritems(leaf);
if (slot != nritems) {
/* shift the items */
memmove_leaf_items(leaf, slot + 1, slot, nritems - slot);
}
btrfs_cpu_key_to_disk(&disk_key, new_key);
btrfs_set_item_key(leaf, &disk_key, slot);
btrfs_set_item_offset(leaf, slot, orig_offset);
btrfs_set_item_size(leaf, slot, item_size - split_offset);
btrfs_set_item_offset(leaf, orig_slot,
orig_offset + item_size - split_offset);
btrfs_set_item_size(leaf, orig_slot, split_offset);
btrfs_set_header_nritems(leaf, nritems + 1);
/* write the data for the start of the original item */
write_extent_buffer(leaf, buf,
btrfs_item_ptr_offset(leaf, path->slots[0]),
split_offset);
/* write the data for the new item */
write_extent_buffer(leaf, buf + split_offset,
btrfs_item_ptr_offset(leaf, slot),
item_size - split_offset);
btrfs_mark_buffer_dirty(trans, leaf);
BUG_ON(btrfs_leaf_free_space(leaf) < 0);
kfree(buf);
return 0;
}
/*
* This function splits a single item into two items,
* giving 'new_key' to the new item and splitting the
* old one at split_offset (from the start of the item).
*
* The path may be released by this operation. After
* the split, the path is pointing to the old item. The
* new item is going to be in the same node as the old one.
*
* Note, the item being split must be smaller enough to live alone on
* a tree block with room for one extra struct btrfs_item
*
* This allows us to split the item in place, keeping a lock on the
* leaf the entire time.
*/
int btrfs_split_item(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
const struct btrfs_key *new_key,
unsigned long split_offset)
{
int ret;
ret = setup_leaf_for_split(trans, root, path,
sizeof(struct btrfs_item));
if (ret)
return ret;
ret = split_item(trans, path, new_key, split_offset);
return ret;
}
/*
* make the item pointed to by the path smaller. new_size indicates
* how small to make it, and from_end tells us if we just chop bytes
* off the end of the item or if we shift the item to chop bytes off
* the front.
*/
void btrfs_truncate_item(struct btrfs_trans_handle *trans,
struct btrfs_path *path, u32 new_size, int from_end)
{
int slot;
struct extent_buffer *leaf;
u32 nritems;
unsigned int data_end;
unsigned int old_data_start;
unsigned int old_size;
unsigned int size_diff;
int i;
struct btrfs_map_token token;
leaf = path->nodes[0];
slot = path->slots[0];
old_size = btrfs_item_size(leaf, slot);
if (old_size == new_size)
return;
nritems = btrfs_header_nritems(leaf);
data_end = leaf_data_end(leaf);
old_data_start = btrfs_item_offset(leaf, slot);
size_diff = old_size - new_size;
BUG_ON(slot < 0);
BUG_ON(slot >= nritems);
/*
* item0..itemN ... dataN.offset..dataN.size .. data0.size
*/
/* first correct the data pointers */
btrfs_init_map_token(&token, leaf);
for (i = slot; i < nritems; i++) {
u32 ioff;
ioff = btrfs_token_item_offset(&token, i);
btrfs_set_token_item_offset(&token, i, ioff + size_diff);
}
/* shift the data */
if (from_end) {
memmove_leaf_data(leaf, data_end + size_diff, data_end,
old_data_start + new_size - data_end);
} else {
struct btrfs_disk_key disk_key;
u64 offset;
btrfs_item_key(leaf, &disk_key, slot);
if (btrfs_disk_key_type(&disk_key) == BTRFS_EXTENT_DATA_KEY) {
unsigned long ptr;
struct btrfs_file_extent_item *fi;
fi = btrfs_item_ptr(leaf, slot,
struct btrfs_file_extent_item);
fi = (struct btrfs_file_extent_item *)(
(unsigned long)fi - size_diff);
if (btrfs_file_extent_type(leaf, fi) ==
BTRFS_FILE_EXTENT_INLINE) {
ptr = btrfs_item_ptr_offset(leaf, slot);
memmove_extent_buffer(leaf, ptr,
(unsigned long)fi,
BTRFS_FILE_EXTENT_INLINE_DATA_START);
}
}
memmove_leaf_data(leaf, data_end + size_diff, data_end,
old_data_start - data_end);
offset = btrfs_disk_key_offset(&disk_key);
btrfs_set_disk_key_offset(&disk_key, offset + size_diff);
btrfs_set_item_key(leaf, &disk_key, slot);
if (slot == 0)
fixup_low_keys(trans, path, &disk_key, 1);
}
btrfs_set_item_size(leaf, slot, new_size);
btrfs_mark_buffer_dirty(trans, leaf);
if (btrfs_leaf_free_space(leaf) < 0) {
btrfs_print_leaf(leaf);
BUG();
}
}
/*
* make the item pointed to by the path bigger, data_size is the added size.
*/
void btrfs_extend_item(struct btrfs_trans_handle *trans,
struct btrfs_path *path, u32 data_size)
{
int slot;
struct extent_buffer *leaf;
u32 nritems;
unsigned int data_end;
unsigned int old_data;
unsigned int old_size;
int i;
struct btrfs_map_token token;
leaf = path->nodes[0];
nritems = btrfs_header_nritems(leaf);
data_end = leaf_data_end(leaf);
if (btrfs_leaf_free_space(leaf) < data_size) {
btrfs_print_leaf(leaf);
BUG();
}
slot = path->slots[0];
old_data = btrfs_item_data_end(leaf, slot);
BUG_ON(slot < 0);
if (slot >= nritems) {
btrfs_print_leaf(leaf);
btrfs_crit(leaf->fs_info, "slot %d too large, nritems %d",
slot, nritems);
btrfs: use BUG() instead of BUG_ON(1) BUG_ON(1) leads to bogus warnings from clang when CONFIG_PROFILE_ANNOTATED_BRANCHES is set: fs/btrfs/volumes.c:5041:3: error: variable 'max_chunk_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fs/btrfs/volumes.c:5046:9: note: uninitialized use occurs here max_chunk_size); ^~~~~~~~~~~~~~ include/linux/kernel.h:860:36: note: expanded from macro 'min' #define min(x, y) __careful_cmp(x, y, <) ^ include/linux/kernel.h:853:17: note: expanded from macro '__careful_cmp' __cmp_once(x, y, __UNIQUE_ID(__x), __UNIQUE_ID(__y), op)) ^ include/linux/kernel.h:847:25: note: expanded from macro '__cmp_once' typeof(y) unique_y = (y); \ ^ fs/btrfs/volumes.c:5041:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ fs/btrfs/volumes.c:4993:20: note: initialize the variable 'max_chunk_size' to silence this warning u64 max_chunk_size; ^ = 0 Change it to BUG() so clang can see that this code path can never continue. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-25 13:02:25 +00:00
BUG();
}
/*
* item0..itemN ... dataN.offset..dataN.size .. data0.size
*/
/* first correct the data pointers */
btrfs_init_map_token(&token, leaf);
for (i = slot; i < nritems; i++) {
u32 ioff;
ioff = btrfs_token_item_offset(&token, i);
btrfs_set_token_item_offset(&token, i, ioff - data_size);
}
/* shift the data */
memmove_leaf_data(leaf, data_end - data_size, data_end,
old_data - data_end);
data_end = old_data;
old_size = btrfs_item_size(leaf, slot);
btrfs_set_item_size(leaf, slot, old_size + data_size);
btrfs_mark_buffer_dirty(trans, leaf);
if (btrfs_leaf_free_space(leaf) < 0) {
btrfs_print_leaf(leaf);
BUG();
}
}
/*
* Make space in the node before inserting one or more items.
*
* @trans: transaction handle
* @root: root we are inserting items to
* @path: points to the leaf/slot where we are going to insert new items
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
* @batch: information about the batch of items to insert
*
* Main purpose is to save stack depth by doing the bulk of the work in a
* function that doesn't call btrfs_search_slot
*/
static void setup_items_for_insert(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_path *path,
const struct btrfs_item_batch *batch)
{
struct btrfs_fs_info *fs_info = root->fs_info;
int i;
u32 nritems;
unsigned int data_end;
struct btrfs_disk_key disk_key;
struct extent_buffer *leaf;
int slot;
struct btrfs_map_token token;
u32 total_size;
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
/*
* Before anything else, update keys in the parent and other ancestors
* if needed, then release the write locks on them, so that other tasks
* can use them while we modify the leaf.
*/
if (path->slots[0] == 0) {
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
btrfs_cpu_key_to_disk(&disk_key, &batch->keys[0]);
fixup_low_keys(trans, path, &disk_key, 1);
}
btrfs_unlock_up_safe(path, 1);
leaf = path->nodes[0];
slot = path->slots[0];
nritems = btrfs_header_nritems(leaf);
data_end = leaf_data_end(leaf);
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
total_size = batch->total_data_size + (batch->nr * sizeof(struct btrfs_item));
if (btrfs_leaf_free_space(leaf) < total_size) {
btrfs_print_leaf(leaf);
btrfs_crit(fs_info, "not enough freespace need %u have %d",
total_size, btrfs_leaf_free_space(leaf));
BUG();
}
btrfs_init_map_token(&token, leaf);
if (slot != nritems) {
unsigned int old_data = btrfs_item_data_end(leaf, slot);
if (old_data < data_end) {
btrfs_print_leaf(leaf);
btrfs_crit(fs_info,
"item at slot %d with data offset %u beyond data end of leaf %u",
slot, old_data, data_end);
btrfs: use BUG() instead of BUG_ON(1) BUG_ON(1) leads to bogus warnings from clang when CONFIG_PROFILE_ANNOTATED_BRANCHES is set: fs/btrfs/volumes.c:5041:3: error: variable 'max_chunk_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fs/btrfs/volumes.c:5046:9: note: uninitialized use occurs here max_chunk_size); ^~~~~~~~~~~~~~ include/linux/kernel.h:860:36: note: expanded from macro 'min' #define min(x, y) __careful_cmp(x, y, <) ^ include/linux/kernel.h:853:17: note: expanded from macro '__careful_cmp' __cmp_once(x, y, __UNIQUE_ID(__x), __UNIQUE_ID(__y), op)) ^ include/linux/kernel.h:847:25: note: expanded from macro '__cmp_once' typeof(y) unique_y = (y); \ ^ fs/btrfs/volumes.c:5041:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ fs/btrfs/volumes.c:4993:20: note: initialize the variable 'max_chunk_size' to silence this warning u64 max_chunk_size; ^ = 0 Change it to BUG() so clang can see that this code path can never continue. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-25 13:02:25 +00:00
BUG();
}
/*
* item0..itemN ... dataN.offset..dataN.size .. data0.size
*/
/* first correct the data pointers */
for (i = slot; i < nritems; i++) {
u32 ioff;
ioff = btrfs_token_item_offset(&token, i);
btrfs_set_token_item_offset(&token, i,
ioff - batch->total_data_size);
}
/* shift the items */
memmove_leaf_items(leaf, slot + batch->nr, slot, nritems - slot);
/* shift the data */
memmove_leaf_data(leaf, data_end - batch->total_data_size,
data_end, old_data - data_end);
data_end = old_data;
}
/* setup the item for the new data */
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
for (i = 0; i < batch->nr; i++) {
btrfs_cpu_key_to_disk(&disk_key, &batch->keys[i]);
btrfs_set_item_key(leaf, &disk_key, slot + i);
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
data_end -= batch->data_sizes[i];
btrfs_set_token_item_offset(&token, slot + i, data_end);
btrfs_set_token_item_size(&token, slot + i, batch->data_sizes[i]);
}
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
btrfs_set_header_nritems(leaf, nritems + batch->nr);
btrfs_mark_buffer_dirty(trans, leaf);
if (btrfs_leaf_free_space(leaf) < 0) {
btrfs_print_leaf(leaf);
BUG();
}
}
/*
* Insert a new item into a leaf.
*
* @trans: Transaction handle.
* @root: The root of the btree.
* @path: A path pointing to the target leaf and slot.
* @key: The key of the new item.
* @data_size: The size of the data associated with the new key.
*/
void btrfs_setup_item_for_insert(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
const struct btrfs_key *key,
u32 data_size)
{
struct btrfs_item_batch batch;
batch.keys = key;
batch.data_sizes = &data_size;
batch.total_data_size = data_size;
batch.nr = 1;
setup_items_for_insert(trans, root, path, &batch);
}
/*
* Given a key and some data, insert items into the tree.
* This does all the path init required, making room in the tree if needed.
*
* Returns: 0 on success
* -EEXIST if the first key already exists
* < 0 on other errors
*/
int btrfs_insert_empty_items(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
const struct btrfs_item_batch *batch)
{
int ret = 0;
int slot;
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
u32 total_size;
btrfs: loop only once over data sizes array when inserting an item batch When inserting a batch of items into a btree, we end up looping over the data sizes array 3 times: 1) Once in the caller of btrfs_insert_empty_items(), when it populates the array with the data sizes for each item; 2) Once at btrfs_insert_empty_items() to sum the elements of the data sizes array and compute the total data size; 3) And then once again at setup_items_for_insert(), where we do exactly the same as what we do at btrfs_insert_empty_items(), to compute the total data size. That is not bad for small arrays, but when the arrays have hundreds of elements, the time spent on looping is not negligible. For example when doing batch inserts of delayed items for dir index items or when logging a directory, it's common to have 200 to 260 dir index items in a single batch when using a leaf size of 16K and using file names between 8 and 12 characters. For a 64K leaf size, multiply that by 4. Taking into account that during directory logging or when flushing delayed dir index items we can have many of those large batches, the time spent on the looping adds up quickly. It's also more important to avoid it at setup_items_for_insert(), since we are holding a write lock on a leaf and, in some cases, on upper nodes of the btree, which causes us to block other tasks that want to access the leaf and nodes for longer than necessary. So change the code so that setup_items_for_insert() and btrfs_insert_empty_items() no longer compute the total data size, and instead rely on the caller to supply it. This makes us loop over the array only once, where we can both populate the data size array and compute the total data size, taking advantage of spatial and temporal locality. To make this more manageable, use a structure to contain all the relevant details for a batch of items (keys array, data sizes array, total data size, number of items), and use it as an argument for btrfs_insert_empty_items() and setup_items_for_insert(). This patch is part of a small patchset that is comprised of the following patches: btrfs: loop only once over data sizes array when inserting an item batch btrfs: unexport setup_items_for_insert() btrfs: use single bulk copy operations when logging directories This is patch 1/3 and performance results, and the specific tests, are included in the changelog of patch 3/3. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-24 11:28:13 +00:00
total_size = batch->total_data_size + (batch->nr * sizeof(struct btrfs_item));
ret = btrfs_search_slot(trans, root, &batch->keys[0], path, total_size, 1);
if (ret == 0)
return -EEXIST;
if (ret < 0)
return ret;
slot = path->slots[0];
BUG_ON(slot < 0);
setup_items_for_insert(trans, root, path, batch);
return 0;
}
/*
* Given a key and some data, insert an item into the tree.
* This does all the path init required, making room in the tree if needed.
*/
int btrfs_insert_item(struct btrfs_trans_handle *trans, struct btrfs_root *root,
const struct btrfs_key *cpu_key, void *data,
u32 data_size)
{
int ret = 0;
struct btrfs_path *path;
struct extent_buffer *leaf;
unsigned long ptr;
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
ret = btrfs_insert_empty_item(trans, root, path, cpu_key, data_size);
if (!ret) {
leaf = path->nodes[0];
ptr = btrfs_item_ptr_offset(leaf, path->slots[0]);
write_extent_buffer(leaf, data, ptr, data_size);
btrfs_mark_buffer_dirty(trans, leaf);
}
btrfs_free_path(path);
return ret;
}
/*
* This function duplicates an item, giving 'new_key' to the new item.
* It guarantees both items live in the same tree leaf and the new item is
* contiguous with the original item.
*
* This allows us to split a file extent in place, keeping a lock on the leaf
* the entire time.
*/
int btrfs_duplicate_item(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
const struct btrfs_key *new_key)
{
struct extent_buffer *leaf;
int ret;
u32 item_size;
leaf = path->nodes[0];
item_size = btrfs_item_size(leaf, path->slots[0]);
ret = setup_leaf_for_split(trans, root, path,
item_size + sizeof(struct btrfs_item));
if (ret)
return ret;
path->slots[0]++;
btrfs_setup_item_for_insert(trans, root, path, new_key, item_size);
leaf = path->nodes[0];
memcpy_extent_buffer(leaf,
btrfs_item_ptr_offset(leaf, path->slots[0]),
btrfs_item_ptr_offset(leaf, path->slots[0] - 1),
item_size);
return 0;
}
/*
* delete the pointer from a given node.
*
* the tree should have been previously balanced so the deletion does not
* empty a node.
*
* This is exported for use inside btrfs-progs, don't un-export it.
*/
int btrfs_del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root,
struct btrfs_path *path, int level, int slot)
{
struct extent_buffer *parent = path->nodes[level];
u32 nritems;
int ret;
nritems = btrfs_header_nritems(parent);
if (slot != nritems - 1) {
if (level) {
ret = btrfs_tree_mod_log_insert_move(parent, slot,
slot + 1, nritems - slot - 1);
if (ret < 0) {
btrfs_abort_transaction(trans, ret);
return ret;
}
}
memmove_extent_buffer(parent,
btrfs_node_key_ptr_offset(parent, slot),
btrfs_node_key_ptr_offset(parent, slot + 1),
sizeof(struct btrfs_key_ptr) *
(nritems - slot - 1));
} else if (level) {
ret = btrfs_tree_mod_log_insert_key(parent, slot,
BTRFS_MOD_LOG_KEY_REMOVE);
if (ret < 0) {
btrfs_abort_transaction(trans, ret);
return ret;
}
}
nritems--;
btrfs_set_header_nritems(parent, nritems);
if (nritems == 0 && parent == root->node) {
BUG_ON(btrfs_header_level(root->node) != 1);
/* just turn the root into a leaf and break */
btrfs_set_header_level(root->node, 0);
} else if (slot == 0) {
struct btrfs_disk_key disk_key;
btrfs_node_key(parent, &disk_key, 0);
fixup_low_keys(trans, path, &disk_key, level + 1);
}
btrfs_mark_buffer_dirty(trans, parent);
return 0;
}
/*
* a helper function to delete the leaf pointed to by path->slots[1] and
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
* path->nodes[1].
*
* This deletes the pointer in path->nodes[1] and frees the leaf
* block extent. zero is returned if it all worked out, < 0 otherwise.
*
* The path must have already been setup for deleting the leaf, including
* all the proper balancing. path->nodes[1] must be locked.
*/
static noinline int btrfs_del_leaf(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
struct extent_buffer *leaf)
{
int ret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 14:45:14 +00:00
WARN_ON(btrfs_header_generation(leaf) != trans->transid);
ret = btrfs_del_ptr(trans, root, path, 1, path->slots[1]);
if (ret < 0)
return ret;
/*
* btrfs_free_extent is expensive, we want to make sure we
* aren't holding any locks when we call it
*/
btrfs_unlock_up_safe(path, 0);
root_sub_used_bytes(root);
atomic_inc(&leaf->refs);
btrfs: fix invalid delayed ref after subvolume creation failure When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the new root's root item into the root tree, we are freeing the metadata extent we reserved for the new root to prevent a metadata extent leak, as we don't abort the transaction at that point (since there is nothing at that point that is irreversible). However we allocated the metadata extent for the new root which we are creating for the new subvolume, so its delayed reference refers to the ID of this new root. But when we free the metadata extent we pass the root of the subvolume where the new subvolume is located to btrfs_free_tree_block() - this is incorrect because this will generate a delayed reference that refers to the ID of the parent subvolume's root, and not to ID of the new root. This results in a failure when running delayed references that leads to a transaction abort and a trace like the following: [3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs] [3868.739857] Code: 68 0f 85 e6 fb ff (...) [3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246 [3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002 [3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88 [3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88 [3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000 [3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88 [3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000 [3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0 [3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [3868.757803] Call Trace: [3868.758281] <TASK> [3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs] [3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs] [3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs] [3868.762069] ? lock_acquired+0x19f/0x420 [3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs] [3868.763860] ? _raw_spin_unlock+0x29/0x40 [3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs] [3868.765870] create_subvol+0x1d8/0x9a0 [btrfs] [3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs] [3868.767669] ? preempt_count_add+0x49/0xa0 [3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [3868.769639] ? _copy_from_user+0x66/0xa0 [3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [3868.772364] ? __slab_free+0x10a/0x360 [3868.773198] ? rcu_read_lock_sched_held+0x12/0x60 [3868.774121] ? lock_release+0x223/0x4a0 [3868.774863] ? lock_acquired+0x19f/0x420 [3868.775634] ? rcu_read_lock_sched_held+0x12/0x60 [3868.776530] ? trace_hardirqs_on+0x1b/0xe0 [3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [3868.778280] ? kmem_cache_free+0x321/0x3c0 [3868.779011] ? __x64_sys_ioctl+0x83/0xb0 [3868.779718] __x64_sys_ioctl+0x83/0xb0 [3868.780387] do_syscall_64+0x3b/0xc0 [3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae [3868.781953] RIP: 0033:0x7f281c59e957 [3868.782585] Code: 3c 1c 48 f7 d8 4c (...) [3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957 [3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003 [3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36 [3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc [3868.793765] </TASK> [3868.794037] irq event stamp: 0 [3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0 [3868.799284] ---[ end trace be24c7002fe27747 ]--- [3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2 [3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627 [3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33 [3868.802863] extent refs 1 gen 1265 flags 2 [3868.803447] ref#0: tree block backref root 1610 (...) [3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33 [3869.065421] extent refs 1 gen 1268 flags 2 [3869.066115] ref#0: tree block backref root 1689 (...) [3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0 [3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry [3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry Fix this by passing the new subvolume's root ID to btrfs_free_tree_block(). This requires changing the root argument of btrfs_free_tree_block() from struct btrfs_root * to a u64, since at this point during the subvolume creation we have not yet created the struct btrfs_root for the new subvolume, and btrfs_free_tree_block() only needs a root ID and nothing else from a struct btrfs_root. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-12-13 08:45:12 +00:00
btrfs_free_tree_block(trans, btrfs_root_id(root), leaf, 0, 1);
free_extent_buffer_stale(leaf);
return 0;
}
/*
* delete the item at the leaf level in path. If that empties
* the leaf, remove it from the tree
*/
int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
struct btrfs_path *path, int slot, int nr)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *leaf;
int ret = 0;
int wret;
u32 nritems;
leaf = path->nodes[0];
nritems = btrfs_header_nritems(leaf);
if (slot + nr != nritems) {
const u32 last_off = btrfs_item_offset(leaf, slot + nr - 1);
const int data_end = leaf_data_end(leaf);
struct btrfs_map_token token;
u32 dsize = 0;
int i;
for (i = 0; i < nr; i++)
dsize += btrfs_item_size(leaf, slot + i);
memmove_leaf_data(leaf, data_end + dsize, data_end,
last_off - data_end);
btrfs_init_map_token(&token, leaf);
for (i = slot + nr; i < nritems; i++) {
u32 ioff;
ioff = btrfs_token_item_offset(&token, i);
btrfs_set_token_item_offset(&token, i, ioff + dsize);
}
memmove_leaf_items(leaf, slot, slot + nr, nritems - slot - nr);
}
btrfs_set_header_nritems(leaf, nritems - nr);
nritems -= nr;
/* delete the leaf if we've emptied it */
if (nritems == 0) {
if (leaf == root->node) {
btrfs_set_header_level(leaf, 0);
} else {
btrfs_clear_buffer_dirty(trans, leaf);
ret = btrfs_del_leaf(trans, root, path, leaf);
if (ret < 0)
return ret;
}
} else {
int used = leaf_space_used(leaf, 0, nritems);
if (slot == 0) {
struct btrfs_disk_key disk_key;
btrfs_item_key(leaf, &disk_key, 0);
fixup_low_keys(trans, path, &disk_key, 1);
}
btrfs: avoid unnecessary COW of leaves when deleting items from a leaf When we delete items from a leaf, if we end up with more than two thirds of unused leaf space, we try to delete the leaf by moving all its items into its left and right neighbour leaves. Sometimes that is not possible because there is not enough free space in the left and right leaves, and in that case we end up not deleting our leaf. The way we are doing this is not ideal and can be improved in the following ways: 1) When we call push_leaf_left(), we pass a value of 1 byte to the data size parameter of push_leaf_left(). This is not realistic value because no item can have a size less than 25 bytes, which is the size of struct btrfs_item. This means that means that if the left leaf has not enough free space to push any item, we end up COWing it even if we end up not changing its content at all. COWing that leaf means allocating a new metadata extent, marking it dirty and doing more IO when committing a transaction or when syncing a log tree. For a log tree case, it's particularly more important to avoid the useless COW operation, as more IO can imply a higher latency for an fsync operation. So instead of passing 1 as the minimum data size for push_leaf_left(), pass the size of the first item in our leaf, as we don't want to COW the left leaf if we can't at least push the first item of our leaf; 2) When we call push_leaf_right(), we also pass a value of 1 byte as the data size parameter of push_leaf_right(). Like the previous case, it will also result in COWing the right leaf even if we are not able to move any items into it, since there can't be any item with a size smaller than 25 bytes (the size of struct btrfs_item). So instead of passing 1 as the minimum data size to push_leaf_right(), pass a size that corresponds to the sum of the size of all the remaining items in our leaf. We are not interested in moving less than that, because if we do, we are not able to delete our leaf and we have COWed the right leaf for nothing. Plus, moving only some of the items of our leaf, it means an even less balanced tree. Just like the previous case, we want to avoid the useless COW of the right leaf, this way we don't have to spend time allocating one new metadata extent, and doing more IO when committing a transaction or syncing a log tree. For the log tree case it's specially more important because more IO can result in a higher latency for a fsync operation. So adjust the minimum data size passed to push_leaf_left() and push_leaf_right() as mentioned above. This change if part of a patchset that is comprised of the following patches: 1/6 btrfs: remove unnecessary leaf free space checks when pushing items 2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf 3/6 btrfs: avoid unnecessary computation when deleting items from a leaf 4/6 btrfs: remove constraint on number of visited leaves when replacing extents 5/6 btrfs: remove useless path release in the fast fsync path 6/6 btrfs: prepare extents to be logged before locking a log tree path Not being able to delete a leaf that became less than 1/3 full after deleting items from it is actually common. For example, for the fio test mentioned in the changelog of patch 6/6, we are only able to delete a leaf at btrfs_del_items() about 5.3% of the time, due to its left and right neighbour leaves not having enough free space to push all the remaining items into them. The last patch in the series has some performance test result in its changelog. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-03 14:55:46 +00:00
/*
* Try to delete the leaf if it is mostly empty. We do this by
* trying to move all its items into its left and right neighbours.
* If we can't move all the items, then we don't delete it - it's
* not ideal, but future insertions might fill the leaf with more
* items, or items from other leaves might be moved later into our
* leaf due to deletions on those leaves.
*/
if (used < BTRFS_LEAF_DATA_SIZE(fs_info) / 3) {
btrfs: avoid unnecessary COW of leaves when deleting items from a leaf When we delete items from a leaf, if we end up with more than two thirds of unused leaf space, we try to delete the leaf by moving all its items into its left and right neighbour leaves. Sometimes that is not possible because there is not enough free space in the left and right leaves, and in that case we end up not deleting our leaf. The way we are doing this is not ideal and can be improved in the following ways: 1) When we call push_leaf_left(), we pass a value of 1 byte to the data size parameter of push_leaf_left(). This is not realistic value because no item can have a size less than 25 bytes, which is the size of struct btrfs_item. This means that means that if the left leaf has not enough free space to push any item, we end up COWing it even if we end up not changing its content at all. COWing that leaf means allocating a new metadata extent, marking it dirty and doing more IO when committing a transaction or when syncing a log tree. For a log tree case, it's particularly more important to avoid the useless COW operation, as more IO can imply a higher latency for an fsync operation. So instead of passing 1 as the minimum data size for push_leaf_left(), pass the size of the first item in our leaf, as we don't want to COW the left leaf if we can't at least push the first item of our leaf; 2) When we call push_leaf_right(), we also pass a value of 1 byte as the data size parameter of push_leaf_right(). Like the previous case, it will also result in COWing the right leaf even if we are not able to move any items into it, since there can't be any item with a size smaller than 25 bytes (the size of struct btrfs_item). So instead of passing 1 as the minimum data size to push_leaf_right(), pass a size that corresponds to the sum of the size of all the remaining items in our leaf. We are not interested in moving less than that, because if we do, we are not able to delete our leaf and we have COWed the right leaf for nothing. Plus, moving only some of the items of our leaf, it means an even less balanced tree. Just like the previous case, we want to avoid the useless COW of the right leaf, this way we don't have to spend time allocating one new metadata extent, and doing more IO when committing a transaction or syncing a log tree. For the log tree case it's specially more important because more IO can result in a higher latency for a fsync operation. So adjust the minimum data size passed to push_leaf_left() and push_leaf_right() as mentioned above. This change if part of a patchset that is comprised of the following patches: 1/6 btrfs: remove unnecessary leaf free space checks when pushing items 2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf 3/6 btrfs: avoid unnecessary computation when deleting items from a leaf 4/6 btrfs: remove constraint on number of visited leaves when replacing extents 5/6 btrfs: remove useless path release in the fast fsync path 6/6 btrfs: prepare extents to be logged before locking a log tree path Not being able to delete a leaf that became less than 1/3 full after deleting items from it is actually common. For example, for the fio test mentioned in the changelog of patch 6/6, we are only able to delete a leaf at btrfs_del_items() about 5.3% of the time, due to its left and right neighbour leaves not having enough free space to push all the remaining items into them. The last patch in the series has some performance test result in its changelog. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-03 14:55:46 +00:00
u32 min_push_space;
/* push_leaf_left fixes the path.
* make sure the path still points to our leaf
* for possible call to btrfs_del_ptr below
*/
slot = path->slots[1];
atomic_inc(&leaf->refs);
btrfs: avoid unnecessary COW of leaves when deleting items from a leaf When we delete items from a leaf, if we end up with more than two thirds of unused leaf space, we try to delete the leaf by moving all its items into its left and right neighbour leaves. Sometimes that is not possible because there is not enough free space in the left and right leaves, and in that case we end up not deleting our leaf. The way we are doing this is not ideal and can be improved in the following ways: 1) When we call push_leaf_left(), we pass a value of 1 byte to the data size parameter of push_leaf_left(). This is not realistic value because no item can have a size less than 25 bytes, which is the size of struct btrfs_item. This means that means that if the left leaf has not enough free space to push any item, we end up COWing it even if we end up not changing its content at all. COWing that leaf means allocating a new metadata extent, marking it dirty and doing more IO when committing a transaction or when syncing a log tree. For a log tree case, it's particularly more important to avoid the useless COW operation, as more IO can imply a higher latency for an fsync operation. So instead of passing 1 as the minimum data size for push_leaf_left(), pass the size of the first item in our leaf, as we don't want to COW the left leaf if we can't at least push the first item of our leaf; 2) When we call push_leaf_right(), we also pass a value of 1 byte as the data size parameter of push_leaf_right(). Like the previous case, it will also result in COWing the right leaf even if we are not able to move any items into it, since there can't be any item with a size smaller than 25 bytes (the size of struct btrfs_item). So instead of passing 1 as the minimum data size to push_leaf_right(), pass a size that corresponds to the sum of the size of all the remaining items in our leaf. We are not interested in moving less than that, because if we do, we are not able to delete our leaf and we have COWed the right leaf for nothing. Plus, moving only some of the items of our leaf, it means an even less balanced tree. Just like the previous case, we want to avoid the useless COW of the right leaf, this way we don't have to spend time allocating one new metadata extent, and doing more IO when committing a transaction or syncing a log tree. For the log tree case it's specially more important because more IO can result in a higher latency for a fsync operation. So adjust the minimum data size passed to push_leaf_left() and push_leaf_right() as mentioned above. This change if part of a patchset that is comprised of the following patches: 1/6 btrfs: remove unnecessary leaf free space checks when pushing items 2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf 3/6 btrfs: avoid unnecessary computation when deleting items from a leaf 4/6 btrfs: remove constraint on number of visited leaves when replacing extents 5/6 btrfs: remove useless path release in the fast fsync path 6/6 btrfs: prepare extents to be logged before locking a log tree path Not being able to delete a leaf that became less than 1/3 full after deleting items from it is actually common. For example, for the fio test mentioned in the changelog of patch 6/6, we are only able to delete a leaf at btrfs_del_items() about 5.3% of the time, due to its left and right neighbour leaves not having enough free space to push all the remaining items into them. The last patch in the series has some performance test result in its changelog. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-03 14:55:46 +00:00
/*
* We want to be able to at least push one item to the
* left neighbour leaf, and that's the first item.
*/
min_push_space = sizeof(struct btrfs_item) +
btrfs_item_size(leaf, 0);
wret = push_leaf_left(trans, root, path, 0,
min_push_space, 1, (u32)-1);
if (wret < 0 && wret != -ENOSPC)
ret = wret;
if (path->nodes[0] == leaf &&
btrfs_header_nritems(leaf)) {
btrfs: avoid unnecessary COW of leaves when deleting items from a leaf When we delete items from a leaf, if we end up with more than two thirds of unused leaf space, we try to delete the leaf by moving all its items into its left and right neighbour leaves. Sometimes that is not possible because there is not enough free space in the left and right leaves, and in that case we end up not deleting our leaf. The way we are doing this is not ideal and can be improved in the following ways: 1) When we call push_leaf_left(), we pass a value of 1 byte to the data size parameter of push_leaf_left(). This is not realistic value because no item can have a size less than 25 bytes, which is the size of struct btrfs_item. This means that means that if the left leaf has not enough free space to push any item, we end up COWing it even if we end up not changing its content at all. COWing that leaf means allocating a new metadata extent, marking it dirty and doing more IO when committing a transaction or when syncing a log tree. For a log tree case, it's particularly more important to avoid the useless COW operation, as more IO can imply a higher latency for an fsync operation. So instead of passing 1 as the minimum data size for push_leaf_left(), pass the size of the first item in our leaf, as we don't want to COW the left leaf if we can't at least push the first item of our leaf; 2) When we call push_leaf_right(), we also pass a value of 1 byte as the data size parameter of push_leaf_right(). Like the previous case, it will also result in COWing the right leaf even if we are not able to move any items into it, since there can't be any item with a size smaller than 25 bytes (the size of struct btrfs_item). So instead of passing 1 as the minimum data size to push_leaf_right(), pass a size that corresponds to the sum of the size of all the remaining items in our leaf. We are not interested in moving less than that, because if we do, we are not able to delete our leaf and we have COWed the right leaf for nothing. Plus, moving only some of the items of our leaf, it means an even less balanced tree. Just like the previous case, we want to avoid the useless COW of the right leaf, this way we don't have to spend time allocating one new metadata extent, and doing more IO when committing a transaction or syncing a log tree. For the log tree case it's specially more important because more IO can result in a higher latency for a fsync operation. So adjust the minimum data size passed to push_leaf_left() and push_leaf_right() as mentioned above. This change if part of a patchset that is comprised of the following patches: 1/6 btrfs: remove unnecessary leaf free space checks when pushing items 2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf 3/6 btrfs: avoid unnecessary computation when deleting items from a leaf 4/6 btrfs: remove constraint on number of visited leaves when replacing extents 5/6 btrfs: remove useless path release in the fast fsync path 6/6 btrfs: prepare extents to be logged before locking a log tree path Not being able to delete a leaf that became less than 1/3 full after deleting items from it is actually common. For example, for the fio test mentioned in the changelog of patch 6/6, we are only able to delete a leaf at btrfs_del_items() about 5.3% of the time, due to its left and right neighbour leaves not having enough free space to push all the remaining items into them. The last patch in the series has some performance test result in its changelog. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-02-03 14:55:46 +00:00
/*
* If we were not able to push all items from our
* leaf to its left neighbour, then attempt to
* either push all the remaining items to the
* right neighbour or none. There's no advantage
* in pushing only some items, instead of all, as
* it's pointless to end up with a leaf having
* too few items while the neighbours can be full
* or nearly full.
*/
nritems = btrfs_header_nritems(leaf);
min_push_space = leaf_space_used(leaf, 0, nritems);
wret = push_leaf_right(trans, root, path, 0,
min_push_space, 1, 0);
if (wret < 0 && wret != -ENOSPC)
ret = wret;
}
if (btrfs_header_nritems(leaf) == 0) {
path->slots[1] = slot;
ret = btrfs_del_leaf(trans, root, path, leaf);
if (ret < 0)
return ret;
free_extent_buffer(leaf);
ret = 0;
} else {
/* if we're still in the path, make sure
* we're dirty. Otherwise, one of the
* push_leaf functions must have already
* dirtied this buffer
*/
if (path->nodes[0] == leaf)
btrfs_mark_buffer_dirty(trans, leaf);
free_extent_buffer(leaf);
}
} else {
btrfs_mark_buffer_dirty(trans, leaf);
}
}
return ret;
}
/*
* A helper function to walk down the tree starting at min_key, and looking
* for nodes or leaves that are have a minimum transaction id.
* This is used by the btree defrag code, and tree logging
*
* This does not cow, but it does stuff the starting key it finds back
* into min_key, so you can call btrfs_search_slot with cow=1 on the
* key and get a writable path.
*
* This honors path->lowest_level to prevent descent past a given level
* of the tree.
*
* min_trans indicates the oldest transaction that you are interested
* in walking through. Any nodes or leaves older than min_trans are
* skipped over (without reading them).
*
* returns zero if something useful was found, < 0 on error and 1 if there
* was nothing in the tree that matched the search criteria.
*/
int btrfs_search_forward(struct btrfs_root *root, struct btrfs_key *min_key,
struct btrfs_path *path,
u64 min_trans)
{
struct extent_buffer *cur;
struct btrfs_key found_key;
int slot;
int sret;
u32 nritems;
int level;
int ret = 1;
int keep_locks = path->keep_locks;
ASSERT(!path->nowait);
path->keep_locks = 1;
again:
cur = btrfs_read_lock_root_node(root);
level = btrfs_header_level(cur);
WARN_ON(path->nodes[level]);
path->nodes[level] = cur;
path->locks[level] = BTRFS_READ_LOCK;
if (btrfs_header_generation(cur) < min_trans) {
ret = 1;
goto out;
}
while (1) {
nritems = btrfs_header_nritems(cur);
level = btrfs_header_level(cur);
sret = btrfs_bin_search(cur, 0, min_key, &slot);
if (sret < 0) {
ret = sret;
goto out;
}
/* at the lowest level, we're done, setup the path and exit */
if (level == path->lowest_level) {
if (slot >= nritems)
goto find_next_key;
ret = 0;
path->slots[level] = slot;
btrfs_item_key_to_cpu(cur, &found_key, slot);
goto out;
}
if (sret && slot > 0)
slot--;
/*
* check this node pointer against the min_trans parameters.
* If it is too old, skip to the next one.
*/
while (slot < nritems) {
u64 gen;
gen = btrfs_node_ptr_generation(cur, slot);
if (gen < min_trans) {
slot++;
continue;
}
break;
}
find_next_key:
/*
* we didn't find a candidate key in this node, walk forward
* and find another one
*/
if (slot >= nritems) {
path->slots[level] = slot;
sret = btrfs_find_next_key(root, path, min_key, level,
min_trans);
if (sret == 0) {
btrfs_release_path(path);
goto again;
} else {
goto out;
}
}
/* save our key for returning back */
btrfs_node_key_to_cpu(cur, &found_key, slot);
path->slots[level] = slot;
if (level == path->lowest_level) {
ret = 0;
goto out;
}
cur = btrfs_read_node_slot(cur, slot);
if (IS_ERR(cur)) {
ret = PTR_ERR(cur);
goto out;
}
btrfs_tree_read_lock(cur);
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
path->locks[level - 1] = BTRFS_READ_LOCK;
path->nodes[level - 1] = cur;
unlock_up(path, level, 1, 0, NULL);
}
out:
path->keep_locks = keep_locks;
if (ret == 0) {
btrfs_unlock_up_safe(path, path->lowest_level + 1);
memcpy(min_key, &found_key, sizeof(found_key));
}
return ret;
}
/*
* this is similar to btrfs_next_leaf, but does not try to preserve
* and fixup the path. It looks for and returns the next key in the
* tree based on the current path and the min_trans parameters.
*
* 0 is returned if another key is found, < 0 if there are any errors
* and 1 is returned if there are no higher keys in the tree
*
* path->keep_locks should be set to 1 on the search made before
* calling this function.
*/
int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path,
struct btrfs_key *key, int level, u64 min_trans)
{
int slot;
struct extent_buffer *c;
WARN_ON(!path->keep_locks && !path->skip_locking);
while (level < BTRFS_MAX_LEVEL) {
if (!path->nodes[level])
return 1;
slot = path->slots[level] + 1;
c = path->nodes[level];
next:
if (slot >= btrfs_header_nritems(c)) {
int ret;
int orig_lowest;
struct btrfs_key cur_key;
if (level + 1 >= BTRFS_MAX_LEVEL ||
!path->nodes[level + 1])
return 1;
if (path->locks[level + 1] || path->skip_locking) {
level++;
continue;
}
slot = btrfs_header_nritems(c) - 1;
if (level == 0)
btrfs_item_key_to_cpu(c, &cur_key, slot);
else
btrfs_node_key_to_cpu(c, &cur_key, slot);
orig_lowest = path->lowest_level;
btrfs_release_path(path);
path->lowest_level = level;
ret = btrfs_search_slot(NULL, root, &cur_key, path,
0, 0);
path->lowest_level = orig_lowest;
if (ret < 0)
return ret;
c = path->nodes[level];
slot = path->slots[level];
if (ret == 0)
slot++;
goto next;
}
if (level == 0)
btrfs_item_key_to_cpu(c, key, slot);
else {
u64 gen = btrfs_node_ptr_generation(c, slot);
if (gen < min_trans) {
slot++;
goto next;
}
btrfs_node_key_to_cpu(c, key, slot);
}
return 0;
}
return 1;
}
int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
u64 time_seq)
{
int slot;
int level;
struct extent_buffer *c;
struct extent_buffer *next;
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_key key;
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
bool need_commit_sem = false;
u32 nritems;
int ret;
btrfs: unlock to current level in btrfs_next_old_leaf Filipe reported the following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.10.0-rc2-btrfs-next-71 #1 Not tainted ------------------------------------------------------ find/324157 is trying to acquire lock: ffff8ebc48d293a0 (btrfs-tree-01#2/3){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] but task is already holding lock: ffff8eb9932c5088 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-tree-00){++++}-{3:3}: lock_acquire+0xd8/0x490 down_write_nested+0x44/0x120 __btrfs_tree_lock+0x27/0x120 [btrfs] btrfs_search_slot+0x2a3/0xc50 [btrfs] btrfs_insert_empty_items+0x58/0xa0 [btrfs] insert_with_overflow+0x44/0x110 [btrfs] btrfs_insert_xattr_item+0xb8/0x1d0 [btrfs] btrfs_setxattr+0xd6/0x4c0 [btrfs] btrfs_setxattr_trans+0x68/0x100 [btrfs] __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x70/0x200 vfs_setxattr+0x6b/0x120 setxattr+0x125/0x240 path_setxattr+0xba/0xd0 __x64_sys_setxattr+0x27/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (btrfs-tree-01#2/3){++++}-{3:3}: check_prev_add+0x91/0xc60 __lock_acquire+0x1689/0x3130 lock_acquire+0xd8/0x490 down_read_nested+0x45/0x220 __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] btrfs_next_old_leaf+0x27d/0x580 [btrfs] btrfs_real_readdir+0x1e3/0x4b0 [btrfs] iterate_dir+0x170/0x1c0 __x64_sys_getdents64+0x83/0x140 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-tree-00); lock(btrfs-tree-01#2/3); lock(btrfs-tree-00); lock(btrfs-tree-01#2/3); *** DEADLOCK *** 5 locks held by find/324157: #0: ffff8ebc502c6e00 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 #1: ffff8eb97f689980 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: iterate_dir+0x52/0x1c0 #2: ffff8ebaec00ca58 (btrfs-tree-02#2){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] #3: ffff8eb98f986f78 (btrfs-tree-01#2){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] #4: ffff8eb9932c5088 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] stack backtrace: CPU: 2 PID: 324157 Comm: find Not tainted 5.10.0-rc2-btrfs-next-71 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8d/0xb5 check_noncircular+0xff/0x110 ? mark_lock.part.0+0x468/0xe90 check_prev_add+0x91/0xc60 __lock_acquire+0x1689/0x3130 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 lock_acquire+0xd8/0x490 ? __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] down_read_nested+0x45/0x220 ? __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] btrfs_next_old_leaf+0x27d/0x580 [btrfs] btrfs_real_readdir+0x1e3/0x4b0 [btrfs] iterate_dir+0x170/0x1c0 __x64_sys_getdents64+0x83/0x140 ? filldir+0x1d0/0x1d0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because btrfs_next_old_leaf searches down to our current key, and then walks up the path until we can move to the next slot, and then reads back down the path so we get the next leaf. However it doesn't unlock any lower levels until it replaces them with the new extent buffer. This is technically fine, but of course causes lockdep to complain, because we could be holding locks on lower levels while locking upper levels. Fix this by dropping all nodes below the level that we use as our new starting point before we start reading back down the path. This also allows us to drop the nested/recursive locking magic, because we're no longer locking two nodes at the same level anymore. Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-06 21:27:30 +00:00
int i;
btrfs: fix assertion failure and blocking during nowait buffered write When doing a nowait buffered write we can trigger the following assertion: [11138.437027] assertion failed: !path->nowait, in fs/btrfs/ctree.c:4658 [11138.438251] ------------[ cut here ]------------ [11138.438254] kernel BUG at fs/btrfs/messages.c:259! [11138.438762] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [11138.439450] CPU: 4 PID: 1091021 Comm: fsstress Not tainted 6.1.0-rc4-btrfs-next-128 #1 [11138.440611] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [11138.442553] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs] [11138.443583] Code: 5b 41 5a 41 (...) [11138.446437] RSP: 0018:ffffbaf0cf05b840 EFLAGS: 00010246 [11138.447235] RAX: 0000000000000039 RBX: ffffbaf0cf05b938 RCX: 0000000000000000 [11138.448303] RDX: 0000000000000000 RSI: ffffffffb2ef59f6 RDI: 00000000ffffffff [11138.449370] RBP: ffff9165f581eb68 R08: 00000000ffffffff R09: 0000000000000001 [11138.450493] R10: ffff9167a88421f8 R11: 0000000000000000 R12: ffff9164981b1000 [11138.451661] R13: 000000008c8f1000 R14: ffff9164991d4000 R15: ffff9164981b1000 [11138.452225] FS: 00007f1438a66440(0000) GS:ffff9167ad600000(0000) knlGS:0000000000000000 [11138.452949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11138.453394] CR2: 00007f1438a64000 CR3: 0000000100c36002 CR4: 0000000000370ee0 [11138.454057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [11138.454879] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [11138.455779] Call Trace: [11138.456211] <TASK> [11138.456598] btrfs_next_old_leaf.cold+0x18/0x1d [btrfs] [11138.457827] ? kmem_cache_alloc+0x18d/0x2a0 [11138.458516] btrfs_lookup_csums_range+0x149/0x4d0 [btrfs] [11138.459407] csum_exist_in_range+0x56/0x110 [btrfs] [11138.460271] can_nocow_file_extent+0x27c/0x310 [btrfs] [11138.461155] can_nocow_extent+0x1ec/0x2e0 [btrfs] [11138.461672] btrfs_check_nocow_lock+0x114/0x1c0 [btrfs] [11138.462951] btrfs_buffered_write+0x44c/0x8e0 [btrfs] [11138.463482] btrfs_do_write_iter+0x42b/0x5f0 [btrfs] [11138.463982] ? lock_release+0x153/0x4a0 [11138.464347] io_write+0x11b/0x570 [11138.464660] ? lock_release+0x153/0x4a0 [11138.465213] ? lock_is_held_type+0xe8/0x140 [11138.466003] io_issue_sqe+0x63/0x4a0 [11138.466339] io_submit_sqes+0x238/0x770 [11138.466741] __do_sys_io_uring_enter+0x37b/0xb10 [11138.467206] ? lock_is_held_type+0xe8/0x140 [11138.467879] ? syscall_enter_from_user_mode+0x1d/0x50 [11138.468688] do_syscall_64+0x38/0x90 [11138.469265] entry_SYSCALL_64_after_hwframe+0x63/0xcd [11138.470017] RIP: 0033:0x7f1438c539e6 This is because to check if we can NOCOW, we check that if we can NOCOW into an extent (it's prealloc extent or the inode has NOCOW attribute), and then check if there are csums for the extent's range in the csum tree. The search may leave us beyond the last slot of a leaf, and then when we call btrfs_next_leaf() we end up at btrfs_next_old_leaf() with a time_seq of 0. This triggers a failure of the first assertion at btrfs_next_old_leaf(), since we have a nowait path. With assertions disabled, we simply don't respect the NOWAIT semantics, allowing the write to block on locks or blocking on IO for reading an extent buffer from disk. Fix this by: 1) Triggering the assertion only if time_seq is not 0, which means that search is being done by a tree mod log user, and in the buffered and direct IO write paths we don't use the tree mod log; 2) Implementing NOWAIT semantics at btrfs_next_old_leaf(). Any failure to lock an extent buffer should return immediately and not retry the search, as well as if we need to do IO to read an extent buffer from disk. Fixes: c922b016f353 ("btrfs: assert nowait mode is not used for some btree search functions") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-11 00:54:40 +00:00
/*
* The nowait semantics are used only for write paths, where we don't
* use the tree mod log and sequence numbers.
*/
if (time_seq)
ASSERT(!path->nowait);
nritems = btrfs_header_nritems(path->nodes[0]);
if (nritems == 0)
return 1;
btrfs_item_key_to_cpu(path->nodes[0], &key, nritems - 1);
again:
level = 1;
next = NULL;
btrfs_release_path(path);
path->keep_locks = 1;
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
if (time_seq) {
ret = btrfs_search_old_slot(root, &key, path, time_seq);
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
} else {
if (path->need_commit_sem) {
path->need_commit_sem = 0;
need_commit_sem = true;
btrfs: fix assertion failure and blocking during nowait buffered write When doing a nowait buffered write we can trigger the following assertion: [11138.437027] assertion failed: !path->nowait, in fs/btrfs/ctree.c:4658 [11138.438251] ------------[ cut here ]------------ [11138.438254] kernel BUG at fs/btrfs/messages.c:259! [11138.438762] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [11138.439450] CPU: 4 PID: 1091021 Comm: fsstress Not tainted 6.1.0-rc4-btrfs-next-128 #1 [11138.440611] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [11138.442553] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs] [11138.443583] Code: 5b 41 5a 41 (...) [11138.446437] RSP: 0018:ffffbaf0cf05b840 EFLAGS: 00010246 [11138.447235] RAX: 0000000000000039 RBX: ffffbaf0cf05b938 RCX: 0000000000000000 [11138.448303] RDX: 0000000000000000 RSI: ffffffffb2ef59f6 RDI: 00000000ffffffff [11138.449370] RBP: ffff9165f581eb68 R08: 00000000ffffffff R09: 0000000000000001 [11138.450493] R10: ffff9167a88421f8 R11: 0000000000000000 R12: ffff9164981b1000 [11138.451661] R13: 000000008c8f1000 R14: ffff9164991d4000 R15: ffff9164981b1000 [11138.452225] FS: 00007f1438a66440(0000) GS:ffff9167ad600000(0000) knlGS:0000000000000000 [11138.452949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11138.453394] CR2: 00007f1438a64000 CR3: 0000000100c36002 CR4: 0000000000370ee0 [11138.454057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [11138.454879] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [11138.455779] Call Trace: [11138.456211] <TASK> [11138.456598] btrfs_next_old_leaf.cold+0x18/0x1d [btrfs] [11138.457827] ? kmem_cache_alloc+0x18d/0x2a0 [11138.458516] btrfs_lookup_csums_range+0x149/0x4d0 [btrfs] [11138.459407] csum_exist_in_range+0x56/0x110 [btrfs] [11138.460271] can_nocow_file_extent+0x27c/0x310 [btrfs] [11138.461155] can_nocow_extent+0x1ec/0x2e0 [btrfs] [11138.461672] btrfs_check_nocow_lock+0x114/0x1c0 [btrfs] [11138.462951] btrfs_buffered_write+0x44c/0x8e0 [btrfs] [11138.463482] btrfs_do_write_iter+0x42b/0x5f0 [btrfs] [11138.463982] ? lock_release+0x153/0x4a0 [11138.464347] io_write+0x11b/0x570 [11138.464660] ? lock_release+0x153/0x4a0 [11138.465213] ? lock_is_held_type+0xe8/0x140 [11138.466003] io_issue_sqe+0x63/0x4a0 [11138.466339] io_submit_sqes+0x238/0x770 [11138.466741] __do_sys_io_uring_enter+0x37b/0xb10 [11138.467206] ? lock_is_held_type+0xe8/0x140 [11138.467879] ? syscall_enter_from_user_mode+0x1d/0x50 [11138.468688] do_syscall_64+0x38/0x90 [11138.469265] entry_SYSCALL_64_after_hwframe+0x63/0xcd [11138.470017] RIP: 0033:0x7f1438c539e6 This is because to check if we can NOCOW, we check that if we can NOCOW into an extent (it's prealloc extent or the inode has NOCOW attribute), and then check if there are csums for the extent's range in the csum tree. The search may leave us beyond the last slot of a leaf, and then when we call btrfs_next_leaf() we end up at btrfs_next_old_leaf() with a time_seq of 0. This triggers a failure of the first assertion at btrfs_next_old_leaf(), since we have a nowait path. With assertions disabled, we simply don't respect the NOWAIT semantics, allowing the write to block on locks or blocking on IO for reading an extent buffer from disk. Fix this by: 1) Triggering the assertion only if time_seq is not 0, which means that search is being done by a tree mod log user, and in the buffered and direct IO write paths we don't use the tree mod log; 2) Implementing NOWAIT semantics at btrfs_next_old_leaf(). Any failure to lock an extent buffer should return immediately and not retry the search, as well as if we need to do IO to read an extent buffer from disk. Fixes: c922b016f353 ("btrfs: assert nowait mode is not used for some btree search functions") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-11 00:54:40 +00:00
if (path->nowait) {
if (!down_read_trylock(&fs_info->commit_root_sem)) {
ret = -EAGAIN;
goto done;
}
} else {
down_read(&fs_info->commit_root_sem);
}
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
}
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
}
path->keep_locks = 0;
if (ret < 0)
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
goto done;
nritems = btrfs_header_nritems(path->nodes[0]);
/*
* by releasing the path above we dropped all our locks. A balance
* could have added more items next to the key that used to be
* at the very end of the block. So, check again here and
* advance the path if there are now more items available.
*/
if (nritems > 0 && path->slots[0] < nritems - 1) {
if (ret == 0)
path->slots[0]++;
ret = 0;
goto done;
}
Btrfs: fix leaf corruption after __btrfs_drop_extents Several reports about leaf corruption has been floating on the list, one of them points to __btrfs_drop_extents(), and we find that the leaf becomes corrupted after __btrfs_drop_extents(), it's really a rare case but it does exist. The problem turns out to be btrfs_next_leaf() called in __btrfs_drop_extents(). So in btrfs_next_leaf(), we release the current path to re-search the last key of the leaf for locating next leaf, and we've taken it into account that there might be balance operations between leafs during this 'unlock and re-lock' dance, so we check the path again and advance it if there are now more items available. But things are a bit different if that last key happens to be removed and balance gets a bigger key as the last one, and btrfs_search_slot will return it with ret > 0, IOW, nothing change in this leaf except the new last key, then we think we're okay because there is no more item balanced in, fine, we thinks we can go to the next leaf. However, we should return that bigger key, otherwise we deserve leaf corruption, for example, in endio, skipping that key means that __btrfs_drop_extents() thinks it has dropped all extent matched the required range and finish_ordered_io can safely insert a new extent, but it actually doesn't and ends up a leaf corruption. One may be asking that why our locking on extent io tree doesn't work as expected, ie. it should avoid this kind of race situation. But in __btrfs_drop_extents(), we don't always find extents which are included within our locking range, IOW, extents can start before our searching start, in this case locking on extent io tree doesn't protect us from the race. This takes the special case into account. Reviewed-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-09 03:04:49 +00:00
/*
* So the above check misses one case:
* - after releasing the path above, someone has removed the item that
* used to be at the very end of the block, and balance between leafs
* gets another one with bigger key.offset to replace it.
*
* This one should be returned as well, or we can get leaf corruption
* later(esp. in __btrfs_drop_extents()).
*
* And a bit more explanation about this check,
* with ret > 0, the key isn't found, the path points to the slot
* where it should be inserted, so the path->slots[0] item must be the
* bigger one.
*/
if (nritems > 0 && ret > 0 && path->slots[0] == nritems - 1) {
ret = 0;
goto done;
}
while (level < BTRFS_MAX_LEVEL) {
if (!path->nodes[level]) {
ret = 1;
goto done;
}
slot = path->slots[level] + 1;
c = path->nodes[level];
if (slot >= btrfs_header_nritems(c)) {
level++;
if (level == BTRFS_MAX_LEVEL) {
ret = 1;
goto done;
}
continue;
}
btrfs: unlock to current level in btrfs_next_old_leaf Filipe reported the following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.10.0-rc2-btrfs-next-71 #1 Not tainted ------------------------------------------------------ find/324157 is trying to acquire lock: ffff8ebc48d293a0 (btrfs-tree-01#2/3){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] but task is already holding lock: ffff8eb9932c5088 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-tree-00){++++}-{3:3}: lock_acquire+0xd8/0x490 down_write_nested+0x44/0x120 __btrfs_tree_lock+0x27/0x120 [btrfs] btrfs_search_slot+0x2a3/0xc50 [btrfs] btrfs_insert_empty_items+0x58/0xa0 [btrfs] insert_with_overflow+0x44/0x110 [btrfs] btrfs_insert_xattr_item+0xb8/0x1d0 [btrfs] btrfs_setxattr+0xd6/0x4c0 [btrfs] btrfs_setxattr_trans+0x68/0x100 [btrfs] __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x70/0x200 vfs_setxattr+0x6b/0x120 setxattr+0x125/0x240 path_setxattr+0xba/0xd0 __x64_sys_setxattr+0x27/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (btrfs-tree-01#2/3){++++}-{3:3}: check_prev_add+0x91/0xc60 __lock_acquire+0x1689/0x3130 lock_acquire+0xd8/0x490 down_read_nested+0x45/0x220 __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] btrfs_next_old_leaf+0x27d/0x580 [btrfs] btrfs_real_readdir+0x1e3/0x4b0 [btrfs] iterate_dir+0x170/0x1c0 __x64_sys_getdents64+0x83/0x140 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-tree-00); lock(btrfs-tree-01#2/3); lock(btrfs-tree-00); lock(btrfs-tree-01#2/3); *** DEADLOCK *** 5 locks held by find/324157: #0: ffff8ebc502c6e00 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 #1: ffff8eb97f689980 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: iterate_dir+0x52/0x1c0 #2: ffff8ebaec00ca58 (btrfs-tree-02#2){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] #3: ffff8eb98f986f78 (btrfs-tree-01#2){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] #4: ffff8eb9932c5088 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] stack backtrace: CPU: 2 PID: 324157 Comm: find Not tainted 5.10.0-rc2-btrfs-next-71 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8d/0xb5 check_noncircular+0xff/0x110 ? mark_lock.part.0+0x468/0xe90 check_prev_add+0x91/0xc60 __lock_acquire+0x1689/0x3130 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 lock_acquire+0xd8/0x490 ? __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] down_read_nested+0x45/0x220 ? __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] btrfs_next_old_leaf+0x27d/0x580 [btrfs] btrfs_real_readdir+0x1e3/0x4b0 [btrfs] iterate_dir+0x170/0x1c0 __x64_sys_getdents64+0x83/0x140 ? filldir+0x1d0/0x1d0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because btrfs_next_old_leaf searches down to our current key, and then walks up the path until we can move to the next slot, and then reads back down the path so we get the next leaf. However it doesn't unlock any lower levels until it replaces them with the new extent buffer. This is technically fine, but of course causes lockdep to complain, because we could be holding locks on lower levels while locking upper levels. Fix this by dropping all nodes below the level that we use as our new starting point before we start reading back down the path. This also allows us to drop the nested/recursive locking magic, because we're no longer locking two nodes at the same level anymore. Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-06 21:27:30 +00:00
/*
* Our current level is where we're going to start from, and to
* make sure lockdep doesn't complain we need to drop our locks
* and nodes from 0 to our current level.
*/
for (i = 0; i < level; i++) {
if (path->locks[level]) {
btrfs_tree_read_unlock(path->nodes[i]);
path->locks[i] = 0;
}
free_extent_buffer(path->nodes[i]);
path->nodes[i] = NULL;
}
next = c;
ret = read_block_for_search(root, path, &next, level,
slot, &key);
btrfs: fix assertion failure and blocking during nowait buffered write When doing a nowait buffered write we can trigger the following assertion: [11138.437027] assertion failed: !path->nowait, in fs/btrfs/ctree.c:4658 [11138.438251] ------------[ cut here ]------------ [11138.438254] kernel BUG at fs/btrfs/messages.c:259! [11138.438762] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [11138.439450] CPU: 4 PID: 1091021 Comm: fsstress Not tainted 6.1.0-rc4-btrfs-next-128 #1 [11138.440611] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [11138.442553] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs] [11138.443583] Code: 5b 41 5a 41 (...) [11138.446437] RSP: 0018:ffffbaf0cf05b840 EFLAGS: 00010246 [11138.447235] RAX: 0000000000000039 RBX: ffffbaf0cf05b938 RCX: 0000000000000000 [11138.448303] RDX: 0000000000000000 RSI: ffffffffb2ef59f6 RDI: 00000000ffffffff [11138.449370] RBP: ffff9165f581eb68 R08: 00000000ffffffff R09: 0000000000000001 [11138.450493] R10: ffff9167a88421f8 R11: 0000000000000000 R12: ffff9164981b1000 [11138.451661] R13: 000000008c8f1000 R14: ffff9164991d4000 R15: ffff9164981b1000 [11138.452225] FS: 00007f1438a66440(0000) GS:ffff9167ad600000(0000) knlGS:0000000000000000 [11138.452949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11138.453394] CR2: 00007f1438a64000 CR3: 0000000100c36002 CR4: 0000000000370ee0 [11138.454057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [11138.454879] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [11138.455779] Call Trace: [11138.456211] <TASK> [11138.456598] btrfs_next_old_leaf.cold+0x18/0x1d [btrfs] [11138.457827] ? kmem_cache_alloc+0x18d/0x2a0 [11138.458516] btrfs_lookup_csums_range+0x149/0x4d0 [btrfs] [11138.459407] csum_exist_in_range+0x56/0x110 [btrfs] [11138.460271] can_nocow_file_extent+0x27c/0x310 [btrfs] [11138.461155] can_nocow_extent+0x1ec/0x2e0 [btrfs] [11138.461672] btrfs_check_nocow_lock+0x114/0x1c0 [btrfs] [11138.462951] btrfs_buffered_write+0x44c/0x8e0 [btrfs] [11138.463482] btrfs_do_write_iter+0x42b/0x5f0 [btrfs] [11138.463982] ? lock_release+0x153/0x4a0 [11138.464347] io_write+0x11b/0x570 [11138.464660] ? lock_release+0x153/0x4a0 [11138.465213] ? lock_is_held_type+0xe8/0x140 [11138.466003] io_issue_sqe+0x63/0x4a0 [11138.466339] io_submit_sqes+0x238/0x770 [11138.466741] __do_sys_io_uring_enter+0x37b/0xb10 [11138.467206] ? lock_is_held_type+0xe8/0x140 [11138.467879] ? syscall_enter_from_user_mode+0x1d/0x50 [11138.468688] do_syscall_64+0x38/0x90 [11138.469265] entry_SYSCALL_64_after_hwframe+0x63/0xcd [11138.470017] RIP: 0033:0x7f1438c539e6 This is because to check if we can NOCOW, we check that if we can NOCOW into an extent (it's prealloc extent or the inode has NOCOW attribute), and then check if there are csums for the extent's range in the csum tree. The search may leave us beyond the last slot of a leaf, and then when we call btrfs_next_leaf() we end up at btrfs_next_old_leaf() with a time_seq of 0. This triggers a failure of the first assertion at btrfs_next_old_leaf(), since we have a nowait path. With assertions disabled, we simply don't respect the NOWAIT semantics, allowing the write to block on locks or blocking on IO for reading an extent buffer from disk. Fix this by: 1) Triggering the assertion only if time_seq is not 0, which means that search is being done by a tree mod log user, and in the buffered and direct IO write paths we don't use the tree mod log; 2) Implementing NOWAIT semantics at btrfs_next_old_leaf(). Any failure to lock an extent buffer should return immediately and not retry the search, as well as if we need to do IO to read an extent buffer from disk. Fixes: c922b016f353 ("btrfs: assert nowait mode is not used for some btree search functions") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-11 00:54:40 +00:00
if (ret == -EAGAIN && !path->nowait)
goto again;
if (ret < 0) {
btrfs_release_path(path);
goto done;
}
if (!path->skip_locking) {
ret = btrfs_try_tree_read_lock(next);
btrfs: fix assertion failure and blocking during nowait buffered write When doing a nowait buffered write we can trigger the following assertion: [11138.437027] assertion failed: !path->nowait, in fs/btrfs/ctree.c:4658 [11138.438251] ------------[ cut here ]------------ [11138.438254] kernel BUG at fs/btrfs/messages.c:259! [11138.438762] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [11138.439450] CPU: 4 PID: 1091021 Comm: fsstress Not tainted 6.1.0-rc4-btrfs-next-128 #1 [11138.440611] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [11138.442553] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs] [11138.443583] Code: 5b 41 5a 41 (...) [11138.446437] RSP: 0018:ffffbaf0cf05b840 EFLAGS: 00010246 [11138.447235] RAX: 0000000000000039 RBX: ffffbaf0cf05b938 RCX: 0000000000000000 [11138.448303] RDX: 0000000000000000 RSI: ffffffffb2ef59f6 RDI: 00000000ffffffff [11138.449370] RBP: ffff9165f581eb68 R08: 00000000ffffffff R09: 0000000000000001 [11138.450493] R10: ffff9167a88421f8 R11: 0000000000000000 R12: ffff9164981b1000 [11138.451661] R13: 000000008c8f1000 R14: ffff9164991d4000 R15: ffff9164981b1000 [11138.452225] FS: 00007f1438a66440(0000) GS:ffff9167ad600000(0000) knlGS:0000000000000000 [11138.452949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11138.453394] CR2: 00007f1438a64000 CR3: 0000000100c36002 CR4: 0000000000370ee0 [11138.454057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [11138.454879] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [11138.455779] Call Trace: [11138.456211] <TASK> [11138.456598] btrfs_next_old_leaf.cold+0x18/0x1d [btrfs] [11138.457827] ? kmem_cache_alloc+0x18d/0x2a0 [11138.458516] btrfs_lookup_csums_range+0x149/0x4d0 [btrfs] [11138.459407] csum_exist_in_range+0x56/0x110 [btrfs] [11138.460271] can_nocow_file_extent+0x27c/0x310 [btrfs] [11138.461155] can_nocow_extent+0x1ec/0x2e0 [btrfs] [11138.461672] btrfs_check_nocow_lock+0x114/0x1c0 [btrfs] [11138.462951] btrfs_buffered_write+0x44c/0x8e0 [btrfs] [11138.463482] btrfs_do_write_iter+0x42b/0x5f0 [btrfs] [11138.463982] ? lock_release+0x153/0x4a0 [11138.464347] io_write+0x11b/0x570 [11138.464660] ? lock_release+0x153/0x4a0 [11138.465213] ? lock_is_held_type+0xe8/0x140 [11138.466003] io_issue_sqe+0x63/0x4a0 [11138.466339] io_submit_sqes+0x238/0x770 [11138.466741] __do_sys_io_uring_enter+0x37b/0xb10 [11138.467206] ? lock_is_held_type+0xe8/0x140 [11138.467879] ? syscall_enter_from_user_mode+0x1d/0x50 [11138.468688] do_syscall_64+0x38/0x90 [11138.469265] entry_SYSCALL_64_after_hwframe+0x63/0xcd [11138.470017] RIP: 0033:0x7f1438c539e6 This is because to check if we can NOCOW, we check that if we can NOCOW into an extent (it's prealloc extent or the inode has NOCOW attribute), and then check if there are csums for the extent's range in the csum tree. The search may leave us beyond the last slot of a leaf, and then when we call btrfs_next_leaf() we end up at btrfs_next_old_leaf() with a time_seq of 0. This triggers a failure of the first assertion at btrfs_next_old_leaf(), since we have a nowait path. With assertions disabled, we simply don't respect the NOWAIT semantics, allowing the write to block on locks or blocking on IO for reading an extent buffer from disk. Fix this by: 1) Triggering the assertion only if time_seq is not 0, which means that search is being done by a tree mod log user, and in the buffered and direct IO write paths we don't use the tree mod log; 2) Implementing NOWAIT semantics at btrfs_next_old_leaf(). Any failure to lock an extent buffer should return immediately and not retry the search, as well as if we need to do IO to read an extent buffer from disk. Fixes: c922b016f353 ("btrfs: assert nowait mode is not used for some btree search functions") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-11 00:54:40 +00:00
if (!ret && path->nowait) {
ret = -EAGAIN;
goto done;
}
if (!ret && time_seq) {
/*
* If we don't get the lock, we may be racing
* with push_leaf_left, holding that lock while
* itself waiting for the leaf we've currently
* locked. To solve this situation, we give up
* on our lock and cycle.
*/
free_extent_buffer(next);
btrfs_release_path(path);
cond_resched();
goto again;
}
btrfs: unlock to current level in btrfs_next_old_leaf Filipe reported the following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.10.0-rc2-btrfs-next-71 #1 Not tainted ------------------------------------------------------ find/324157 is trying to acquire lock: ffff8ebc48d293a0 (btrfs-tree-01#2/3){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] but task is already holding lock: ffff8eb9932c5088 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-tree-00){++++}-{3:3}: lock_acquire+0xd8/0x490 down_write_nested+0x44/0x120 __btrfs_tree_lock+0x27/0x120 [btrfs] btrfs_search_slot+0x2a3/0xc50 [btrfs] btrfs_insert_empty_items+0x58/0xa0 [btrfs] insert_with_overflow+0x44/0x110 [btrfs] btrfs_insert_xattr_item+0xb8/0x1d0 [btrfs] btrfs_setxattr+0xd6/0x4c0 [btrfs] btrfs_setxattr_trans+0x68/0x100 [btrfs] __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x70/0x200 vfs_setxattr+0x6b/0x120 setxattr+0x125/0x240 path_setxattr+0xba/0xd0 __x64_sys_setxattr+0x27/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (btrfs-tree-01#2/3){++++}-{3:3}: check_prev_add+0x91/0xc60 __lock_acquire+0x1689/0x3130 lock_acquire+0xd8/0x490 down_read_nested+0x45/0x220 __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] btrfs_next_old_leaf+0x27d/0x580 [btrfs] btrfs_real_readdir+0x1e3/0x4b0 [btrfs] iterate_dir+0x170/0x1c0 __x64_sys_getdents64+0x83/0x140 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-tree-00); lock(btrfs-tree-01#2/3); lock(btrfs-tree-00); lock(btrfs-tree-01#2/3); *** DEADLOCK *** 5 locks held by find/324157: #0: ffff8ebc502c6e00 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 #1: ffff8eb97f689980 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: iterate_dir+0x52/0x1c0 #2: ffff8ebaec00ca58 (btrfs-tree-02#2){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] #3: ffff8eb98f986f78 (btrfs-tree-01#2){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] #4: ffff8eb9932c5088 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] stack backtrace: CPU: 2 PID: 324157 Comm: find Not tainted 5.10.0-rc2-btrfs-next-71 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8d/0xb5 check_noncircular+0xff/0x110 ? mark_lock.part.0+0x468/0xe90 check_prev_add+0x91/0xc60 __lock_acquire+0x1689/0x3130 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 lock_acquire+0xd8/0x490 ? __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] down_read_nested+0x45/0x220 ? __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] __btrfs_tree_read_lock+0x32/0x1a0 [btrfs] btrfs_next_old_leaf+0x27d/0x580 [btrfs] btrfs_real_readdir+0x1e3/0x4b0 [btrfs] iterate_dir+0x170/0x1c0 __x64_sys_getdents64+0x83/0x140 ? filldir+0x1d0/0x1d0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because btrfs_next_old_leaf searches down to our current key, and then walks up the path until we can move to the next slot, and then reads back down the path so we get the next leaf. However it doesn't unlock any lower levels until it replaces them with the new extent buffer. This is technically fine, but of course causes lockdep to complain, because we could be holding locks on lower levels while locking upper levels. Fix this by dropping all nodes below the level that we use as our new starting point before we start reading back down the path. This also allows us to drop the nested/recursive locking magic, because we're no longer locking two nodes at the same level anymore. Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-06 21:27:30 +00:00
if (!ret)
btrfs_tree_read_lock(next);
}
break;
}
path->slots[level] = slot;
while (1) {
level--;
path->nodes[level] = next;
path->slots[level] = 0;
if (!path->skip_locking)
path->locks[level] = BTRFS_READ_LOCK;
if (!level)
break;
Btrfs: Change btree locking to use explicit blocking points Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04 14:25:08 +00:00
ret = read_block_for_search(root, path, &next, level,
0, &key);
btrfs: fix assertion failure and blocking during nowait buffered write When doing a nowait buffered write we can trigger the following assertion: [11138.437027] assertion failed: !path->nowait, in fs/btrfs/ctree.c:4658 [11138.438251] ------------[ cut here ]------------ [11138.438254] kernel BUG at fs/btrfs/messages.c:259! [11138.438762] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [11138.439450] CPU: 4 PID: 1091021 Comm: fsstress Not tainted 6.1.0-rc4-btrfs-next-128 #1 [11138.440611] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [11138.442553] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs] [11138.443583] Code: 5b 41 5a 41 (...) [11138.446437] RSP: 0018:ffffbaf0cf05b840 EFLAGS: 00010246 [11138.447235] RAX: 0000000000000039 RBX: ffffbaf0cf05b938 RCX: 0000000000000000 [11138.448303] RDX: 0000000000000000 RSI: ffffffffb2ef59f6 RDI: 00000000ffffffff [11138.449370] RBP: ffff9165f581eb68 R08: 00000000ffffffff R09: 0000000000000001 [11138.450493] R10: ffff9167a88421f8 R11: 0000000000000000 R12: ffff9164981b1000 [11138.451661] R13: 000000008c8f1000 R14: ffff9164991d4000 R15: ffff9164981b1000 [11138.452225] FS: 00007f1438a66440(0000) GS:ffff9167ad600000(0000) knlGS:0000000000000000 [11138.452949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11138.453394] CR2: 00007f1438a64000 CR3: 0000000100c36002 CR4: 0000000000370ee0 [11138.454057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [11138.454879] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [11138.455779] Call Trace: [11138.456211] <TASK> [11138.456598] btrfs_next_old_leaf.cold+0x18/0x1d [btrfs] [11138.457827] ? kmem_cache_alloc+0x18d/0x2a0 [11138.458516] btrfs_lookup_csums_range+0x149/0x4d0 [btrfs] [11138.459407] csum_exist_in_range+0x56/0x110 [btrfs] [11138.460271] can_nocow_file_extent+0x27c/0x310 [btrfs] [11138.461155] can_nocow_extent+0x1ec/0x2e0 [btrfs] [11138.461672] btrfs_check_nocow_lock+0x114/0x1c0 [btrfs] [11138.462951] btrfs_buffered_write+0x44c/0x8e0 [btrfs] [11138.463482] btrfs_do_write_iter+0x42b/0x5f0 [btrfs] [11138.463982] ? lock_release+0x153/0x4a0 [11138.464347] io_write+0x11b/0x570 [11138.464660] ? lock_release+0x153/0x4a0 [11138.465213] ? lock_is_held_type+0xe8/0x140 [11138.466003] io_issue_sqe+0x63/0x4a0 [11138.466339] io_submit_sqes+0x238/0x770 [11138.466741] __do_sys_io_uring_enter+0x37b/0xb10 [11138.467206] ? lock_is_held_type+0xe8/0x140 [11138.467879] ? syscall_enter_from_user_mode+0x1d/0x50 [11138.468688] do_syscall_64+0x38/0x90 [11138.469265] entry_SYSCALL_64_after_hwframe+0x63/0xcd [11138.470017] RIP: 0033:0x7f1438c539e6 This is because to check if we can NOCOW, we check that if we can NOCOW into an extent (it's prealloc extent or the inode has NOCOW attribute), and then check if there are csums for the extent's range in the csum tree. The search may leave us beyond the last slot of a leaf, and then when we call btrfs_next_leaf() we end up at btrfs_next_old_leaf() with a time_seq of 0. This triggers a failure of the first assertion at btrfs_next_old_leaf(), since we have a nowait path. With assertions disabled, we simply don't respect the NOWAIT semantics, allowing the write to block on locks or blocking on IO for reading an extent buffer from disk. Fix this by: 1) Triggering the assertion only if time_seq is not 0, which means that search is being done by a tree mod log user, and in the buffered and direct IO write paths we don't use the tree mod log; 2) Implementing NOWAIT semantics at btrfs_next_old_leaf(). Any failure to lock an extent buffer should return immediately and not retry the search, as well as if we need to do IO to read an extent buffer from disk. Fixes: c922b016f353 ("btrfs: assert nowait mode is not used for some btree search functions") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-11 00:54:40 +00:00
if (ret == -EAGAIN && !path->nowait)
goto again;
if (ret < 0) {
btrfs_release_path(path);
goto done;
}
btrfs: fix assertion failure and blocking during nowait buffered write When doing a nowait buffered write we can trigger the following assertion: [11138.437027] assertion failed: !path->nowait, in fs/btrfs/ctree.c:4658 [11138.438251] ------------[ cut here ]------------ [11138.438254] kernel BUG at fs/btrfs/messages.c:259! [11138.438762] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [11138.439450] CPU: 4 PID: 1091021 Comm: fsstress Not tainted 6.1.0-rc4-btrfs-next-128 #1 [11138.440611] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [11138.442553] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs] [11138.443583] Code: 5b 41 5a 41 (...) [11138.446437] RSP: 0018:ffffbaf0cf05b840 EFLAGS: 00010246 [11138.447235] RAX: 0000000000000039 RBX: ffffbaf0cf05b938 RCX: 0000000000000000 [11138.448303] RDX: 0000000000000000 RSI: ffffffffb2ef59f6 RDI: 00000000ffffffff [11138.449370] RBP: ffff9165f581eb68 R08: 00000000ffffffff R09: 0000000000000001 [11138.450493] R10: ffff9167a88421f8 R11: 0000000000000000 R12: ffff9164981b1000 [11138.451661] R13: 000000008c8f1000 R14: ffff9164991d4000 R15: ffff9164981b1000 [11138.452225] FS: 00007f1438a66440(0000) GS:ffff9167ad600000(0000) knlGS:0000000000000000 [11138.452949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11138.453394] CR2: 00007f1438a64000 CR3: 0000000100c36002 CR4: 0000000000370ee0 [11138.454057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [11138.454879] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [11138.455779] Call Trace: [11138.456211] <TASK> [11138.456598] btrfs_next_old_leaf.cold+0x18/0x1d [btrfs] [11138.457827] ? kmem_cache_alloc+0x18d/0x2a0 [11138.458516] btrfs_lookup_csums_range+0x149/0x4d0 [btrfs] [11138.459407] csum_exist_in_range+0x56/0x110 [btrfs] [11138.460271] can_nocow_file_extent+0x27c/0x310 [btrfs] [11138.461155] can_nocow_extent+0x1ec/0x2e0 [btrfs] [11138.461672] btrfs_check_nocow_lock+0x114/0x1c0 [btrfs] [11138.462951] btrfs_buffered_write+0x44c/0x8e0 [btrfs] [11138.463482] btrfs_do_write_iter+0x42b/0x5f0 [btrfs] [11138.463982] ? lock_release+0x153/0x4a0 [11138.464347] io_write+0x11b/0x570 [11138.464660] ? lock_release+0x153/0x4a0 [11138.465213] ? lock_is_held_type+0xe8/0x140 [11138.466003] io_issue_sqe+0x63/0x4a0 [11138.466339] io_submit_sqes+0x238/0x770 [11138.466741] __do_sys_io_uring_enter+0x37b/0xb10 [11138.467206] ? lock_is_held_type+0xe8/0x140 [11138.467879] ? syscall_enter_from_user_mode+0x1d/0x50 [11138.468688] do_syscall_64+0x38/0x90 [11138.469265] entry_SYSCALL_64_after_hwframe+0x63/0xcd [11138.470017] RIP: 0033:0x7f1438c539e6 This is because to check if we can NOCOW, we check that if we can NOCOW into an extent (it's prealloc extent or the inode has NOCOW attribute), and then check if there are csums for the extent's range in the csum tree. The search may leave us beyond the last slot of a leaf, and then when we call btrfs_next_leaf() we end up at btrfs_next_old_leaf() with a time_seq of 0. This triggers a failure of the first assertion at btrfs_next_old_leaf(), since we have a nowait path. With assertions disabled, we simply don't respect the NOWAIT semantics, allowing the write to block on locks or blocking on IO for reading an extent buffer from disk. Fix this by: 1) Triggering the assertion only if time_seq is not 0, which means that search is being done by a tree mod log user, and in the buffered and direct IO write paths we don't use the tree mod log; 2) Implementing NOWAIT semantics at btrfs_next_old_leaf(). Any failure to lock an extent buffer should return immediately and not retry the search, as well as if we need to do IO to read an extent buffer from disk. Fixes: c922b016f353 ("btrfs: assert nowait mode is not used for some btree search functions") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-11 00:54:40 +00:00
if (!path->skip_locking) {
if (path->nowait) {
if (!btrfs_try_tree_read_lock(next)) {
ret = -EAGAIN;
goto done;
}
} else {
btrfs_tree_read_lock(next);
}
}
}
ret = 0;
done:
unlock_up(path, 0, 1, 0, NULL);
btrfs: make send work with concurrent block group relocation We don't allow send and balance/relocation to run in parallel in order to prevent send failing or silently producing some bad stream. This is because while send is using an extent (specially metadata) or about to read a metadata extent and expecting it belongs to a specific parent node, relocation can run, the transaction used for the relocation is committed and the extent gets reallocated while send is still using the extent, so it ends up with a different content than expected. This can result in just failing to read a metadata extent due to failure of the validation checks (parent transid, level, etc), failure to find a backreference for a data extent, and other unexpected failures. Besides reallocation, there's also a similar problem of an extent getting discarded when it's unpinned after the transaction used for block group relocation is committed. The restriction between balance and send was added in commit 9e967495e0e0 ("Btrfs: prevent send failures and crashes due to concurrent relocation"), kernel 5.3, while the more general restriction between send and relocation was added in commit 1cea5cf0e664 ("btrfs: ensure relocation never runs while we have send operations running"), kernel 5.14. Both send and relocation can be very long running operations. Relocation because it has to do a lot of IO and expensive backreference lookups in case there are many snapshots, and send due to read IO when operating on very large trees. This makes it inconvenient for users and tools to deal with scheduling both operations. For zoned filesystem we also have automatic block group relocation, so send can fail with -EAGAIN when users least expect it or send can end up delaying the block group relocation for too long. In the future we might also get the automatic block group relocation for non zoned filesystems. This change makes it possible for send and relocation to run in parallel. This is achieved the following way: 1) For all tree searches, send acquires a read lock on the commit root semaphore; 2) After each tree search, and before releasing the commit root semaphore, the leaf is cloned and placed in the search path (struct btrfs_path); 3) After releasing the commit root semaphore, the changed_cb() callback is invoked, which operates on the leaf and writes commands to the pipe (or file in case send/receive is not used with a pipe). It's important here to not hold a lock on the commit root semaphore, because if we did we could deadlock when sending and receiving to the same filesystem using a pipe - the send task blocks on the pipe because it's full, the receive task, which is the only consumer of the pipe, triggers a transaction commit when attempting to create a subvolume or reserve space for a write operation for example, but the transaction commit blocks trying to write lock the commit root semaphore, resulting in a deadlock; 4) Before moving to the next key, or advancing to the next change in case of an incremental send, check if a transaction used for relocation was committed (or is about to finish its commit). If so, release the search path(s) and restart the search, to where we were before, so that we don't operate on stale extent buffers. The search restarts are always possible because both the send and parent roots are RO, and no one can add, remove of update keys (change their offset) in RO trees - the only exception is deduplication, but that is still not allowed to run in parallel with send; 5) Periodically check if there is contention on the commit root semaphore, which means there is a transaction commit trying to write lock it, and release the semaphore and reschedule if there is contention, so as to avoid causing any significant delays to transaction commits. This leaves some room for optimizations for send to have less path releases and re searching the trees when there's relocation running, but for now it's kept simple as it performs quite well (on very large trees with resulting send streams in the order of a few hundred gigabytes). Test case btrfs/187, from fstests, stresses relocation, send and deduplication attempting to run in parallel, but without verifying if send succeeds and if it produces correct streams. A new test case will be added that exercises relocation happening in parallel with send and then checks that send succeeds and the resulting streams are correct. A final note is that for now this still leaves the mutual exclusion between send operations and deduplication on files belonging to a root used by send operations. A solution for that will be slightly more complex but it will eventually be built on top of this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-11-22 12:03:38 +00:00
if (need_commit_sem) {
int ret2;
path->need_commit_sem = 1;
ret2 = finish_need_commit_sem_search(path);
up_read(&fs_info->commit_root_sem);
if (ret2)
ret = ret2;
}
return ret;
}
int btrfs_next_old_item(struct btrfs_root *root, struct btrfs_path *path, u64 time_seq)
{
path->slots[0]++;
if (path->slots[0] >= btrfs_header_nritems(path->nodes[0]))
return btrfs_next_old_leaf(root, path, time_seq);
return 0;
}
/*
* this uses btrfs_prev_leaf to walk backwards in the tree, and keeps
* searching until it gets past min_objectid or finds an item of 'type'
*
* returns 0 if something is found, 1 if nothing was found and < 0 on error
*/
int btrfs_previous_item(struct btrfs_root *root,
struct btrfs_path *path, u64 min_objectid,
int type)
{
struct btrfs_key found_key;
struct extent_buffer *leaf;
u32 nritems;
int ret;
while (1) {
if (path->slots[0] == 0) {
ret = btrfs_prev_leaf(root, path);
if (ret != 0)
return ret;
} else {
path->slots[0]--;
}
leaf = path->nodes[0];
nritems = btrfs_header_nritems(leaf);
if (nritems == 0)
return 1;
if (path->slots[0] == nritems)
path->slots[0]--;
btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
if (found_key.objectid < min_objectid)
break;
if (found_key.type == type)
return 0;
if (found_key.objectid == min_objectid &&
found_key.type < type)
break;
}
return 1;
}
/*
* search in extent tree to find a previous Metadata/Data extent item with
* min objecitd.
*
* returns 0 if something is found, 1 if nothing was found and < 0 on error
*/
int btrfs_previous_extent_item(struct btrfs_root *root,
struct btrfs_path *path, u64 min_objectid)
{
struct btrfs_key found_key;
struct extent_buffer *leaf;
u32 nritems;
int ret;
while (1) {
if (path->slots[0] == 0) {
ret = btrfs_prev_leaf(root, path);
if (ret != 0)
return ret;
} else {
path->slots[0]--;
}
leaf = path->nodes[0];
nritems = btrfs_header_nritems(leaf);
if (nritems == 0)
return 1;
if (path->slots[0] == nritems)
path->slots[0]--;
btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
if (found_key.objectid < min_objectid)
break;
if (found_key.type == BTRFS_EXTENT_ITEM_KEY ||
found_key.type == BTRFS_METADATA_ITEM_KEY)
return 0;
if (found_key.objectid == min_objectid &&
found_key.type < BTRFS_EXTENT_ITEM_KEY)
break;
}
return 1;
}
int __init btrfs_ctree_init(void)
{
btrfs_path_cachep = KMEM_CACHE(btrfs_path, 0);
if (!btrfs_path_cachep)
return -ENOMEM;
return 0;
}
void __cold btrfs_ctree_exit(void)
{
kmem_cache_destroy(btrfs_path_cachep);
}