linux/drivers/regulator/stm32-vrefbuf.c

297 lines
7.5 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) STMicroelectronics 2017
*
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/pm_runtime.h>
/* STM32 VREFBUF registers */
#define STM32_VREFBUF_CSR 0x00
/* STM32 VREFBUF CSR bitfields */
#define STM32_VRS GENMASK(6, 4)
#define STM32_VRR BIT(3)
#define STM32_HIZ BIT(1)
#define STM32_ENVR BIT(0)
#define STM32_VREFBUF_AUTO_SUSPEND_DELAY_MS 10
struct stm32_vrefbuf {
void __iomem *base;
struct clk *clk;
struct device *dev;
};
static const unsigned int stm32_vrefbuf_voltages[] = {
/* Matches resp. VRS = 000b, 001b, 010b, 011b */
2500000, 2048000, 1800000, 1500000,
};
static int stm32_vrefbuf_enable(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
u32 val;
int ret;
ret = pm_runtime_resume_and_get(priv->dev);
if (ret < 0)
return ret;
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val = (val & ~STM32_HIZ) | STM32_ENVR;
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
/*
* Vrefbuf startup time depends on external capacitor: wait here for
* VRR to be set. That means output has reached expected value.
* ~650us sleep should be enough for caps up to 1.5uF. Use 10ms as
* arbitrary timeout.
*/
ret = readl_poll_timeout(priv->base + STM32_VREFBUF_CSR, val,
val & STM32_VRR, 650, 10000);
if (ret) {
dev_err(&rdev->dev, "stm32 vrefbuf timed out!\n");
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val = (val & ~STM32_ENVR) | STM32_HIZ;
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
}
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return ret;
}
static int stm32_vrefbuf_disable(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
u32 val;
int ret;
ret = pm_runtime_resume_and_get(priv->dev);
if (ret < 0)
return ret;
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val &= ~STM32_ENVR;
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return 0;
}
static int stm32_vrefbuf_is_enabled(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
int ret;
ret = pm_runtime_resume_and_get(priv->dev);
if (ret < 0)
return ret;
ret = readl_relaxed(priv->base + STM32_VREFBUF_CSR) & STM32_ENVR;
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return ret;
}
static int stm32_vrefbuf_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
u32 val;
int ret;
ret = pm_runtime_resume_and_get(priv->dev);
if (ret < 0)
return ret;
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
val = (val & ~STM32_VRS) | FIELD_PREP(STM32_VRS, sel);
writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return 0;
}
static int stm32_vrefbuf_get_voltage_sel(struct regulator_dev *rdev)
{
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
u32 val;
int ret;
ret = pm_runtime_resume_and_get(priv->dev);
if (ret < 0)
return ret;
val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
ret = FIELD_GET(STM32_VRS, val);
pm_runtime_mark_last_busy(priv->dev);
pm_runtime_put_autosuspend(priv->dev);
return ret;
}
static const struct regulator_ops stm32_vrefbuf_volt_ops = {
.enable = stm32_vrefbuf_enable,
.disable = stm32_vrefbuf_disable,
.is_enabled = stm32_vrefbuf_is_enabled,
.get_voltage_sel = stm32_vrefbuf_get_voltage_sel,
.set_voltage_sel = stm32_vrefbuf_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
};
static const struct regulator_desc stm32_vrefbuf_regu = {
.name = "vref",
.supply_name = "vdda",
.volt_table = stm32_vrefbuf_voltages,
.n_voltages = ARRAY_SIZE(stm32_vrefbuf_voltages),
.ops = &stm32_vrefbuf_volt_ops,
.off_on_delay = 1000,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
};
static int stm32_vrefbuf_probe(struct platform_device *pdev)
{
struct stm32_vrefbuf *priv;
struct regulator_config config = { };
struct regulator_dev *rdev;
int ret;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = &pdev->dev;
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
priv->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev,
STM32_VREFBUF_AUTO_SUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_enable(&pdev->dev);
ret = clk_prepare_enable(priv->clk);
if (ret) {
dev_err(&pdev->dev, "clk prepare failed with error %d\n", ret);
goto err_pm_stop;
}
config.dev = &pdev->dev;
config.driver_data = priv;
config.of_node = pdev->dev.of_node;
config.init_data = of_get_regulator_init_data(&pdev->dev,
pdev->dev.of_node,
&stm32_vrefbuf_regu);
rdev = regulator_register(&pdev->dev, &stm32_vrefbuf_regu, &config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(&pdev->dev, "register failed with error %d\n", ret);
goto err_clk_dis;
}
platform_set_drvdata(pdev, rdev);
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
return 0;
err_clk_dis:
clk_disable_unprepare(priv->clk);
err_pm_stop:
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
return ret;
}
static void stm32_vrefbuf_remove(struct platform_device *pdev)
{
struct regulator_dev *rdev = platform_get_drvdata(pdev);
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
pm_runtime_get_sync(&pdev->dev);
regulator_unregister(rdev);
clk_disable_unprepare(priv->clk);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
};
static int __maybe_unused stm32_vrefbuf_runtime_suspend(struct device *dev)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
clk_disable_unprepare(priv->clk);
return 0;
}
static int __maybe_unused stm32_vrefbuf_runtime_resume(struct device *dev)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
return clk_prepare_enable(priv->clk);
}
static const struct dev_pm_ops stm32_vrefbuf_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(stm32_vrefbuf_runtime_suspend,
stm32_vrefbuf_runtime_resume,
NULL)
};
static const struct of_device_id __maybe_unused stm32_vrefbuf_of_match[] = {
{ .compatible = "st,stm32-vrefbuf", },
{},
};
MODULE_DEVICE_TABLE(of, stm32_vrefbuf_of_match);
static struct platform_driver stm32_vrefbuf_driver = {
.probe = stm32_vrefbuf_probe,
.remove_new = stm32_vrefbuf_remove,
.driver = {
.name = "stm32-vrefbuf",
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14 Probing of regulators can be a slow operation and can contribute to slower boot times. This is especially true if a regulator is turned on at probe time (with regulator-boot-on or regulator-always-on) and the regulator requires delays (off-on-time, ramp time, etc). While the overall kernel is not ready to switch to async probe by default, as per the discussion on the mailing lists [1] it is believed that the regulator subsystem is in good shape and we can move regulator drivers over wholesale. There is no way to just magically opt in all regulators (regulators are just normal drivers like platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all regulators found in 'drivers/regulator' individually. Given the number of drivers touched and the impossibility to test this ahead of time, it wouldn't be shocking at all if this caused a regression for someone. If there is a regression caused by this patch, it's likely to be one of the cases talked about in [1]. As a "quick fix", drivers involved in the regression could be fixed by changing them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix would be to directly fix the problem that caused the issue with async probe. The approach here follows a similar approach that was used for the mmc subsystem several years ago [2]. In fact, I ran nearly the same python script to auto-generate the changes. The only thing I changed was to search for "i2c_driver", "spmi_driver", and "spi_driver" in addition to "platform_driver". [1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk [2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/ Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-16 19:54:38 +00:00
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(stm32_vrefbuf_of_match),
.pm = &stm32_vrefbuf_pm_ops,
},
};
module_platform_driver(stm32_vrefbuf_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
MODULE_DESCRIPTION("STMicroelectronics STM32 VREFBUF driver");
MODULE_ALIAS("platform:stm32-vrefbuf");