linux/drivers/pci/controller/pcie-tango.c

342 lines
8.8 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
#include <linux/pci-ecam.h>
#include <linux/delay.h>
#include <linux/msi.h>
#include <linux/of_address.h>
#define MSI_MAX 256
#define SMP8759_MUX 0x48
#define SMP8759_TEST_OUT 0x74
#define SMP8759_DOORBELL 0x7c
#define SMP8759_STATUS 0x80
#define SMP8759_ENABLE 0xa0
struct tango_pcie {
DECLARE_BITMAP(used_msi, MSI_MAX);
u64 msi_doorbell;
spinlock_t used_msi_lock;
void __iomem *base;
struct irq_domain *dom;
};
static void tango_msi_isr(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct tango_pcie *pcie = irq_desc_get_handler_data(desc);
unsigned long status, base, virq, idx, pos = 0;
chained_irq_enter(chip, desc);
spin_lock(&pcie->used_msi_lock);
while ((pos = find_next_bit(pcie->used_msi, MSI_MAX, pos)) < MSI_MAX) {
base = round_down(pos, 32);
status = readl_relaxed(pcie->base + SMP8759_STATUS + base / 8);
for_each_set_bit(idx, &status, 32) {
virq = irq_find_mapping(pcie->dom, base + idx);
generic_handle_irq(virq);
}
pos = base + 32;
}
spin_unlock(&pcie->used_msi_lock);
chained_irq_exit(chip, desc);
}
static void tango_ack(struct irq_data *d)
{
struct tango_pcie *pcie = d->chip_data;
u32 offset = (d->hwirq / 32) * 4;
u32 bit = BIT(d->hwirq % 32);
writel_relaxed(bit, pcie->base + SMP8759_STATUS + offset);
}
static void update_msi_enable(struct irq_data *d, bool unmask)
{
unsigned long flags;
struct tango_pcie *pcie = d->chip_data;
u32 offset = (d->hwirq / 32) * 4;
u32 bit = BIT(d->hwirq % 32);
u32 val;
spin_lock_irqsave(&pcie->used_msi_lock, flags);
val = readl_relaxed(pcie->base + SMP8759_ENABLE + offset);
val = unmask ? val | bit : val & ~bit;
writel_relaxed(val, pcie->base + SMP8759_ENABLE + offset);
spin_unlock_irqrestore(&pcie->used_msi_lock, flags);
}
static void tango_mask(struct irq_data *d)
{
update_msi_enable(d, false);
}
static void tango_unmask(struct irq_data *d)
{
update_msi_enable(d, true);
}
static int tango_set_affinity(struct irq_data *d, const struct cpumask *mask,
bool force)
{
return -EINVAL;
}
static void tango_compose_msi_msg(struct irq_data *d, struct msi_msg *msg)
{
struct tango_pcie *pcie = d->chip_data;
msg->address_lo = lower_32_bits(pcie->msi_doorbell);
msg->address_hi = upper_32_bits(pcie->msi_doorbell);
msg->data = d->hwirq;
}
static struct irq_chip tango_chip = {
.irq_ack = tango_ack,
.irq_mask = tango_mask,
.irq_unmask = tango_unmask,
.irq_set_affinity = tango_set_affinity,
.irq_compose_msi_msg = tango_compose_msi_msg,
};
static void msi_ack(struct irq_data *d)
{
irq_chip_ack_parent(d);
}
static void msi_mask(struct irq_data *d)
{
pci_msi_mask_irq(d);
irq_chip_mask_parent(d);
}
static void msi_unmask(struct irq_data *d)
{
pci_msi_unmask_irq(d);
irq_chip_unmask_parent(d);
}
static struct irq_chip msi_chip = {
.name = "MSI",
.irq_ack = msi_ack,
.irq_mask = msi_mask,
.irq_unmask = msi_unmask,
};
static struct msi_domain_info msi_dom_info = {
.flags = MSI_FLAG_PCI_MSIX
| MSI_FLAG_USE_DEF_DOM_OPS
| MSI_FLAG_USE_DEF_CHIP_OPS,
.chip = &msi_chip,
};
static int tango_irq_domain_alloc(struct irq_domain *dom, unsigned int virq,
unsigned int nr_irqs, void *args)
{
struct tango_pcie *pcie = dom->host_data;
unsigned long flags;
int pos;
spin_lock_irqsave(&pcie->used_msi_lock, flags);
pos = find_first_zero_bit(pcie->used_msi, MSI_MAX);
if (pos >= MSI_MAX) {
spin_unlock_irqrestore(&pcie->used_msi_lock, flags);
return -ENOSPC;
}
__set_bit(pos, pcie->used_msi);
spin_unlock_irqrestore(&pcie->used_msi_lock, flags);
irq_domain_set_info(dom, virq, pos, &tango_chip,
pcie, handle_edge_irq, NULL, NULL);
return 0;
}
static void tango_irq_domain_free(struct irq_domain *dom, unsigned int virq,
unsigned int nr_irqs)
{
unsigned long flags;
struct irq_data *d = irq_domain_get_irq_data(dom, virq);
struct tango_pcie *pcie = d->chip_data;
spin_lock_irqsave(&pcie->used_msi_lock, flags);
__clear_bit(d->hwirq, pcie->used_msi);
spin_unlock_irqrestore(&pcie->used_msi_lock, flags);
}
static const struct irq_domain_ops dom_ops = {
.alloc = tango_irq_domain_alloc,
.free = tango_irq_domain_free,
};
static int smp8759_config_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
struct pci_config_window *cfg = bus->sysdata;
struct tango_pcie *pcie = dev_get_drvdata(cfg->parent);
int ret;
/* Reads in configuration space outside devfn 0 return garbage */
if (devfn != 0)
return PCIBIOS_FUNC_NOT_SUPPORTED;
/*
* PCI config and MMIO accesses are muxed. Linux doesn't have a
* mutual exclusion mechanism for config vs. MMIO accesses, so
* concurrent accesses may cause corruption.
*/
writel_relaxed(1, pcie->base + SMP8759_MUX);
ret = pci_generic_config_read(bus, devfn, where, size, val);
writel_relaxed(0, pcie->base + SMP8759_MUX);
return ret;
}
static int smp8759_config_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
struct pci_config_window *cfg = bus->sysdata;
struct tango_pcie *pcie = dev_get_drvdata(cfg->parent);
int ret;
writel_relaxed(1, pcie->base + SMP8759_MUX);
ret = pci_generic_config_write(bus, devfn, where, size, val);
writel_relaxed(0, pcie->base + SMP8759_MUX);
return ret;
}
static struct pci_ecam_ops smp8759_ecam_ops = {
.bus_shift = 20,
.pci_ops = {
.map_bus = pci_ecam_map_bus,
.read = smp8759_config_read,
.write = smp8759_config_write,
}
};
static int tango_pcie_link_up(struct tango_pcie *pcie)
{
void __iomem *test_out = pcie->base + SMP8759_TEST_OUT;
int i;
writel_relaxed(16, test_out);
for (i = 0; i < 10; ++i) {
u32 ltssm_state = readl_relaxed(test_out) >> 8;
if ((ltssm_state & 0x1f) == 0xf) /* L0 */
return 1;
usleep_range(3000, 4000);
}
return 0;
}
static int tango_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct tango_pcie *pcie;
struct resource *res;
struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
struct irq_domain *msi_dom, *irq_dom;
struct of_pci_range_parser parser;
struct of_pci_range range;
int virq, offset;
dev_warn(dev, "simultaneous PCI config and MMIO accesses may cause data corruption\n");
add_taint(TAINT_CRAP, LOCKDEP_STILL_OK);
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
if (!pcie)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
pcie->base = devm_ioremap_resource(dev, res);
if (IS_ERR(pcie->base))
return PTR_ERR(pcie->base);
platform_set_drvdata(pdev, pcie);
if (!tango_pcie_link_up(pcie))
return -ENODEV;
if (of_pci_dma_range_parser_init(&parser, dev->of_node) < 0)
return -ENOENT;
if (of_pci_range_parser_one(&parser, &range) == NULL)
return -ENOENT;
range.pci_addr += range.size;
pcie->msi_doorbell = range.pci_addr + res->start + SMP8759_DOORBELL;
for (offset = 0; offset < MSI_MAX / 8; offset += 4)
writel_relaxed(0, pcie->base + SMP8759_ENABLE + offset);
virq = platform_get_irq(pdev, 1);
if (virq <= 0) {
dev_err(dev, "Failed to map IRQ\n");
return -ENXIO;
}
irq_dom = irq_domain_create_linear(fwnode, MSI_MAX, &dom_ops, pcie);
if (!irq_dom) {
dev_err(dev, "Failed to create IRQ domain\n");
return -ENOMEM;
}
msi_dom = pci_msi_create_irq_domain(fwnode, &msi_dom_info, irq_dom);
if (!msi_dom) {
dev_err(dev, "Failed to create MSI domain\n");
irq_domain_remove(irq_dom);
return -ENOMEM;
}
pcie->dom = irq_dom;
spin_lock_init(&pcie->used_msi_lock);
irq_set_chained_handler_and_data(virq, tango_msi_isr, pcie);
return pci_host_common_probe(pdev, &smp8759_ecam_ops);
}
static const struct of_device_id tango_pcie_ids[] = {
{ .compatible = "sigma,smp8759-pcie" },
{ },
};
static struct platform_driver tango_pcie_driver = {
.probe = tango_pcie_probe,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = tango_pcie_ids,
.suppress_bind_attrs = true,
},
};
builtin_platform_driver(tango_pcie_driver);
/*
* The root complex advertises the wrong device class.
* Header Type 1 is for PCI-to-PCI bridges.
*/
static void tango_fixup_class(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIGMA, 0x0024, tango_fixup_class);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIGMA, 0x0028, tango_fixup_class);
/*
* The root complex exposes a "fake" BAR, which is used to filter
* bus-to-system accesses. Only accesses within the range defined by this
* BAR are forwarded to the host, others are ignored.
*
* By default, the DMA framework expects an identity mapping, and DRAM0 is
* mapped at 0x80000000.
*/
static void tango_fixup_bar(struct pci_dev *dev)
{
dev->non_compliant_bars = true;
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x80000000);
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIGMA, 0x0024, tango_fixup_bar);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIGMA, 0x0028, tango_fixup_bar);