linux/drivers/regulator/da9210-regulator.c

226 lines
6.0 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
//
// da9210-regulator.c - Regulator device driver for DA9210
// Copyright (C) 2013 Dialog Semiconductor Ltd.
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
#include "da9210-regulator.h"
struct da9210 {
struct regulator_dev *rdev;
struct regmap *regmap;
};
static const struct regmap_config da9210_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static const struct regulator_ops da9210_buck_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
};
/* Default limits measured in millivolts and milliamps */
#define DA9210_MIN_MV 300
#define DA9210_MAX_MV 1570
#define DA9210_STEP_MV 10
/* Current limits for buck (uA) indices corresponds with register values */
static const unsigned int da9210_buck_limits[] = {
1600000, 1800000, 2000000, 2200000, 2400000, 2600000, 2800000, 3000000,
3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000, 4600000
};
static const struct regulator_desc da9210_reg = {
.name = "DA9210",
.id = 0,
.ops = &da9210_buck_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ((DA9210_MAX_MV - DA9210_MIN_MV) / DA9210_STEP_MV) + 1,
.min_uV = (DA9210_MIN_MV * 1000),
.uV_step = (DA9210_STEP_MV * 1000),
.vsel_reg = DA9210_REG_VBUCK_A,
.vsel_mask = DA9210_VBUCK_MASK,
.enable_reg = DA9210_REG_BUCK_CONT,
.enable_mask = DA9210_BUCK_EN,
.owner = THIS_MODULE,
.curr_table = da9210_buck_limits,
.n_current_limits = ARRAY_SIZE(da9210_buck_limits),
.csel_reg = DA9210_REG_BUCK_ILIM,
.csel_mask = DA9210_BUCK_ILIM_MASK,
};
static irqreturn_t da9210_irq_handler(int irq, void *data)
{
struct da9210 *chip = data;
unsigned int val, handled = 0;
int error, ret = IRQ_NONE;
error = regmap_read(chip->regmap, DA9210_REG_EVENT_B, &val);
if (error < 0)
goto error_i2c;
if (val & DA9210_E_OVCURR) {
regulator_notifier_call_chain(chip->rdev,
REGULATOR_EVENT_OVER_CURRENT,
NULL);
handled |= DA9210_E_OVCURR;
}
if (val & DA9210_E_NPWRGOOD) {
regulator_notifier_call_chain(chip->rdev,
REGULATOR_EVENT_UNDER_VOLTAGE,
NULL);
handled |= DA9210_E_NPWRGOOD;
}
if (val & (DA9210_E_TEMP_WARN | DA9210_E_TEMP_CRIT)) {
regulator_notifier_call_chain(chip->rdev,
REGULATOR_EVENT_OVER_TEMP, NULL);
handled |= val & (DA9210_E_TEMP_WARN | DA9210_E_TEMP_CRIT);
}
if (val & DA9210_E_VMAX) {
regulator_notifier_call_chain(chip->rdev,
REGULATOR_EVENT_REGULATION_OUT,
NULL);
handled |= DA9210_E_VMAX;
}
if (handled) {
/* Clear handled events */
error = regmap_write(chip->regmap, DA9210_REG_EVENT_B, handled);
if (error < 0)
goto error_i2c;
ret = IRQ_HANDLED;
}
return ret;
error_i2c:
dev_err(regmap_get_device(chip->regmap), "I2C error : %d\n", error);
return ret;
}
/*
* I2C driver interface functions
*/
static const struct of_device_id __maybe_unused da9210_dt_ids[] = {
{ .compatible = "dlg,da9210", },
{ }
};
MODULE_DEVICE_TABLE(of, da9210_dt_ids);
static int da9210_i2c_probe(struct i2c_client *i2c)
{
struct da9210 *chip;
struct device *dev = &i2c->dev;
struct da9210_pdata *pdata = dev_get_platdata(dev);
struct regulator_dev *rdev = NULL;
struct regulator_config config = { };
int error;
chip = devm_kzalloc(&i2c->dev, sizeof(struct da9210), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->regmap = devm_regmap_init_i2c(i2c, &da9210_regmap_config);
if (IS_ERR(chip->regmap)) {
error = PTR_ERR(chip->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
error);
return error;
}
config.dev = &i2c->dev;
config.init_data = pdata ? &pdata->da9210_constraints :
of_get_regulator_init_data(dev, dev->of_node, &da9210_reg);
config.driver_data = chip;
config.regmap = chip->regmap;
config.of_node = dev->of_node;
/* Mask all interrupt sources to deassert interrupt line */
error = regmap_write(chip->regmap, DA9210_REG_MASK_A, ~0);
if (!error)
error = regmap_write(chip->regmap, DA9210_REG_MASK_B, ~0);
if (error) {
dev_err(&i2c->dev, "Failed to write to mask reg: %d\n", error);
return error;
}
rdev = devm_regulator_register(&i2c->dev, &da9210_reg, &config);
if (IS_ERR(rdev)) {
dev_err(&i2c->dev, "Failed to register DA9210 regulator\n");
return PTR_ERR(rdev);
}
chip->rdev = rdev;
if (i2c->irq) {
error = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
da9210_irq_handler,
IRQF_TRIGGER_LOW |
IRQF_ONESHOT | IRQF_SHARED,
"da9210", chip);
if (error) {
dev_err(&i2c->dev, "Failed to request IRQ%u: %d\n",
i2c->irq, error);
return error;
}
error = regmap_update_bits(chip->regmap, DA9210_REG_MASK_B,
DA9210_M_OVCURR | DA9210_M_NPWRGOOD |
DA9210_M_TEMP_WARN |
DA9210_M_TEMP_CRIT | DA9210_M_VMAX, 0);
if (error < 0) {
dev_err(&i2c->dev, "Failed to update mask reg: %d\n",
error);
return error;
}
} else {
dev_warn(&i2c->dev, "No IRQ configured\n");
}
i2c_set_clientdata(i2c, chip);
return 0;
}
static const struct i2c_device_id da9210_i2c_id[] = {
{ "da9210" },
{}
};
MODULE_DEVICE_TABLE(i2c, da9210_i2c_id);
static struct i2c_driver da9210_regulator_driver = {
.driver = {
.name = "da9210",
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14 Probing of regulators can be a slow operation and can contribute to slower boot times. This is especially true if a regulator is turned on at probe time (with regulator-boot-on or regulator-always-on) and the regulator requires delays (off-on-time, ramp time, etc). While the overall kernel is not ready to switch to async probe by default, as per the discussion on the mailing lists [1] it is believed that the regulator subsystem is in good shape and we can move regulator drivers over wholesale. There is no way to just magically opt in all regulators (regulators are just normal drivers like platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all regulators found in 'drivers/regulator' individually. Given the number of drivers touched and the impossibility to test this ahead of time, it wouldn't be shocking at all if this caused a regression for someone. If there is a regression caused by this patch, it's likely to be one of the cases talked about in [1]. As a "quick fix", drivers involved in the regression could be fixed by changing them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix would be to directly fix the problem that caused the issue with async probe. The approach here follows a similar approach that was used for the mmc subsystem several years ago [2]. In fact, I ran nearly the same python script to auto-generate the changes. The only thing I changed was to search for "i2c_driver", "spmi_driver", and "spi_driver" in addition to "platform_driver". [1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk [2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/ Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-16 19:54:38 +00:00
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(da9210_dt_ids),
},
.probe = da9210_i2c_probe,
.id_table = da9210_i2c_id,
};
module_i2c_driver(da9210_regulator_driver);
MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
MODULE_DESCRIPTION("Regulator device driver for Dialog DA9210");
MODULE_LICENSE("GPL v2");