drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
/*
|
|
|
|
* Copyright 2013 Red Hat Inc.
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
|
|
|
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
|
|
|
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* Authors: Dave Airlie
|
|
|
|
* Alon Levy
|
|
|
|
*/
|
|
|
|
|
2017-04-24 04:50:30 +00:00
|
|
|
#include <drm/ttm/ttm_bo_api.h>
|
|
|
|
#include <drm/ttm/ttm_bo_driver.h>
|
|
|
|
#include <drm/ttm/ttm_placement.h>
|
|
|
|
#include <drm/ttm/ttm_page_alloc.h>
|
|
|
|
#include <drm/ttm/ttm_module.h>
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
#include <drm/drmP.h>
|
|
|
|
#include <drm/drm.h>
|
|
|
|
#include <drm/qxl_drm.h>
|
|
|
|
#include "qxl_drv.h"
|
|
|
|
#include "qxl_object.h"
|
|
|
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
|
|
|
static struct qxl_device *qxl_get_qdev(struct ttm_bo_device *bdev)
|
|
|
|
{
|
|
|
|
struct qxl_mman *mman;
|
|
|
|
struct qxl_device *qdev;
|
|
|
|
|
|
|
|
mman = container_of(bdev, struct qxl_mman, bdev);
|
|
|
|
qdev = container_of(mman, struct qxl_device, mman);
|
|
|
|
return qdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_ttm_mem_global_init(struct drm_global_reference *ref)
|
|
|
|
{
|
|
|
|
return ttm_mem_global_init(ref->object);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void qxl_ttm_mem_global_release(struct drm_global_reference *ref)
|
|
|
|
{
|
|
|
|
ttm_mem_global_release(ref->object);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_ttm_global_init(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
struct drm_global_reference *global_ref;
|
|
|
|
int r;
|
|
|
|
|
|
|
|
qdev->mman.mem_global_referenced = false;
|
|
|
|
global_ref = &qdev->mman.mem_global_ref;
|
|
|
|
global_ref->global_type = DRM_GLOBAL_TTM_MEM;
|
|
|
|
global_ref->size = sizeof(struct ttm_mem_global);
|
|
|
|
global_ref->init = &qxl_ttm_mem_global_init;
|
|
|
|
global_ref->release = &qxl_ttm_mem_global_release;
|
|
|
|
|
|
|
|
r = drm_global_item_ref(global_ref);
|
|
|
|
if (r != 0) {
|
|
|
|
DRM_ERROR("Failed setting up TTM memory accounting "
|
|
|
|
"subsystem.\n");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
qdev->mman.bo_global_ref.mem_glob =
|
|
|
|
qdev->mman.mem_global_ref.object;
|
|
|
|
global_ref = &qdev->mman.bo_global_ref.ref;
|
|
|
|
global_ref->global_type = DRM_GLOBAL_TTM_BO;
|
|
|
|
global_ref->size = sizeof(struct ttm_bo_global);
|
|
|
|
global_ref->init = &ttm_bo_global_init;
|
|
|
|
global_ref->release = &ttm_bo_global_release;
|
|
|
|
r = drm_global_item_ref(global_ref);
|
|
|
|
if (r != 0) {
|
|
|
|
DRM_ERROR("Failed setting up TTM BO subsystem.\n");
|
|
|
|
drm_global_item_unref(&qdev->mman.mem_global_ref);
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
qdev->mman.mem_global_referenced = true;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void qxl_ttm_global_fini(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
if (qdev->mman.mem_global_referenced) {
|
|
|
|
drm_global_item_unref(&qdev->mman.bo_global_ref.ref);
|
|
|
|
drm_global_item_unref(&qdev->mman.mem_global_ref);
|
|
|
|
qdev->mman.mem_global_referenced = false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct vm_operations_struct qxl_ttm_vm_ops;
|
|
|
|
static const struct vm_operations_struct *ttm_vm_ops;
|
|
|
|
|
2017-02-24 22:56:41 +00:00
|
|
|
static int qxl_ttm_fault(struct vm_fault *vmf)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
{
|
|
|
|
struct ttm_buffer_object *bo;
|
|
|
|
int r;
|
|
|
|
|
2017-02-24 22:56:41 +00:00
|
|
|
bo = (struct ttm_buffer_object *)vmf->vma->vm_private_data;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
if (bo == NULL)
|
|
|
|
return VM_FAULT_NOPAGE;
|
2017-02-24 22:56:41 +00:00
|
|
|
r = ttm_vm_ops->fault(vmf);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_mmap(struct file *filp, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
struct drm_file *file_priv;
|
|
|
|
struct qxl_device *qdev;
|
|
|
|
int r;
|
|
|
|
|
2017-09-12 17:34:22 +00:00
|
|
|
if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET))
|
2014-09-23 13:46:47 +00:00
|
|
|
return -EINVAL;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
|
|
|
|
file_priv = filp->private_data;
|
|
|
|
qdev = file_priv->minor->dev->dev_private;
|
|
|
|
if (qdev == NULL) {
|
|
|
|
DRM_ERROR(
|
|
|
|
"filp->private_data->minor->dev->dev_private == NULL\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2017-10-19 06:21:49 +00:00
|
|
|
DRM_DEBUG_DRIVER("filp->private_data = 0x%p, vma->vm_pgoff = %lx\n",
|
|
|
|
filp->private_data, vma->vm_pgoff);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
|
|
|
|
r = ttm_bo_mmap(filp, vma, &qdev->mman.bdev);
|
|
|
|
if (unlikely(r != 0))
|
|
|
|
return r;
|
|
|
|
if (unlikely(ttm_vm_ops == NULL)) {
|
|
|
|
ttm_vm_ops = vma->vm_ops;
|
|
|
|
qxl_ttm_vm_ops = *ttm_vm_ops;
|
|
|
|
qxl_ttm_vm_ops.fault = &qxl_ttm_fault;
|
|
|
|
}
|
|
|
|
vma->vm_ops = &qxl_ttm_vm_ops;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_invalidate_caches(struct ttm_bo_device *bdev, uint32_t flags)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_init_mem_type(struct ttm_bo_device *bdev, uint32_t type,
|
|
|
|
struct ttm_mem_type_manager *man)
|
|
|
|
{
|
|
|
|
switch (type) {
|
|
|
|
case TTM_PL_SYSTEM:
|
|
|
|
/* System memory */
|
|
|
|
man->flags = TTM_MEMTYPE_FLAG_MAPPABLE;
|
|
|
|
man->available_caching = TTM_PL_MASK_CACHING;
|
|
|
|
man->default_caching = TTM_PL_FLAG_CACHED;
|
|
|
|
break;
|
|
|
|
case TTM_PL_VRAM:
|
2016-09-12 11:34:37 +00:00
|
|
|
case TTM_PL_PRIV:
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
/* "On-card" video ram */
|
|
|
|
man->func = &ttm_bo_manager_func;
|
|
|
|
man->gpu_offset = 0;
|
|
|
|
man->flags = TTM_MEMTYPE_FLAG_FIXED |
|
|
|
|
TTM_MEMTYPE_FLAG_MAPPABLE;
|
|
|
|
man->available_caching = TTM_PL_MASK_CACHING;
|
|
|
|
man->default_caching = TTM_PL_FLAG_CACHED;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DRM_ERROR("Unsupported memory type %u\n", (unsigned)type);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void qxl_evict_flags(struct ttm_buffer_object *bo,
|
|
|
|
struct ttm_placement *placement)
|
|
|
|
{
|
|
|
|
struct qxl_bo *qbo;
|
2017-07-02 17:33:35 +00:00
|
|
|
static const struct ttm_place placements = {
|
2014-08-27 11:16:04 +00:00
|
|
|
.fpfn = 0,
|
|
|
|
.lpfn = 0,
|
|
|
|
.flags = TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM
|
|
|
|
};
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
|
|
|
|
if (!qxl_ttm_bo_is_qxl_bo(bo)) {
|
|
|
|
placement->placement = &placements;
|
|
|
|
placement->busy_placement = &placements;
|
|
|
|
placement->num_placement = 1;
|
|
|
|
placement->num_busy_placement = 1;
|
|
|
|
return;
|
|
|
|
}
|
2015-12-15 11:20:56 +00:00
|
|
|
qbo = to_qxl_bo(bo);
|
2013-07-23 04:06:07 +00:00
|
|
|
qxl_ttm_placement_from_domain(qbo, QXL_GEM_DOMAIN_CPU, false);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
*placement = qbo->placement;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_verify_access(struct ttm_buffer_object *bo, struct file *filp)
|
|
|
|
{
|
2013-08-25 16:28:59 +00:00
|
|
|
struct qxl_bo *qbo = to_qxl_bo(bo);
|
|
|
|
|
2016-09-01 12:48:33 +00:00
|
|
|
return drm_vma_node_verify_access(&qbo->gem_base.vma_node,
|
|
|
|
filp->private_data);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_ttm_io_mem_reserve(struct ttm_bo_device *bdev,
|
|
|
|
struct ttm_mem_reg *mem)
|
|
|
|
{
|
|
|
|
struct ttm_mem_type_manager *man = &bdev->man[mem->mem_type];
|
|
|
|
struct qxl_device *qdev = qxl_get_qdev(bdev);
|
|
|
|
|
|
|
|
mem->bus.addr = NULL;
|
|
|
|
mem->bus.offset = 0;
|
|
|
|
mem->bus.size = mem->num_pages << PAGE_SHIFT;
|
|
|
|
mem->bus.base = 0;
|
|
|
|
mem->bus.is_iomem = false;
|
|
|
|
if (!(man->flags & TTM_MEMTYPE_FLAG_MAPPABLE))
|
|
|
|
return -EINVAL;
|
|
|
|
switch (mem->mem_type) {
|
|
|
|
case TTM_PL_SYSTEM:
|
|
|
|
/* system memory */
|
|
|
|
return 0;
|
|
|
|
case TTM_PL_VRAM:
|
|
|
|
mem->bus.is_iomem = true;
|
|
|
|
mem->bus.base = qdev->vram_base;
|
|
|
|
mem->bus.offset = mem->start << PAGE_SHIFT;
|
|
|
|
break;
|
2016-09-12 11:34:37 +00:00
|
|
|
case TTM_PL_PRIV:
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
mem->bus.is_iomem = true;
|
|
|
|
mem->bus.base = qdev->surfaceram_base;
|
|
|
|
mem->bus.offset = mem->start << PAGE_SHIFT;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void qxl_ttm_io_mem_free(struct ttm_bo_device *bdev,
|
|
|
|
struct ttm_mem_reg *mem)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TTM backend functions.
|
|
|
|
*/
|
|
|
|
struct qxl_ttm_tt {
|
|
|
|
struct ttm_dma_tt ttm;
|
|
|
|
struct qxl_device *qdev;
|
|
|
|
u64 offset;
|
|
|
|
};
|
|
|
|
|
|
|
|
static int qxl_ttm_backend_bind(struct ttm_tt *ttm,
|
|
|
|
struct ttm_mem_reg *bo_mem)
|
|
|
|
{
|
|
|
|
struct qxl_ttm_tt *gtt = (void *)ttm;
|
|
|
|
|
|
|
|
gtt->offset = (unsigned long)(bo_mem->start << PAGE_SHIFT);
|
|
|
|
if (!ttm->num_pages) {
|
|
|
|
WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n",
|
|
|
|
ttm->num_pages, bo_mem, ttm);
|
|
|
|
}
|
|
|
|
/* Not implemented */
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_ttm_backend_unbind(struct ttm_tt *ttm)
|
|
|
|
{
|
|
|
|
/* Not implemented */
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void qxl_ttm_backend_destroy(struct ttm_tt *ttm)
|
|
|
|
{
|
|
|
|
struct qxl_ttm_tt *gtt = (void *)ttm;
|
|
|
|
|
|
|
|
ttm_dma_tt_fini(>t->ttm);
|
|
|
|
kfree(gtt);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct ttm_backend_func qxl_backend_func = {
|
|
|
|
.bind = &qxl_ttm_backend_bind,
|
|
|
|
.unbind = &qxl_ttm_backend_unbind,
|
|
|
|
.destroy = &qxl_ttm_backend_destroy,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int qxl_ttm_tt_populate(struct ttm_tt *ttm)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
|
|
|
|
if (ttm->state != tt_unpopulated)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
r = ttm_pool_populate(ttm);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void qxl_ttm_tt_unpopulate(struct ttm_tt *ttm)
|
|
|
|
{
|
|
|
|
ttm_pool_unpopulate(ttm);
|
|
|
|
}
|
|
|
|
|
2013-04-16 03:24:25 +00:00
|
|
|
static struct ttm_tt *qxl_ttm_tt_create(struct ttm_bo_device *bdev,
|
|
|
|
unsigned long size, uint32_t page_flags,
|
|
|
|
struct page *dummy_read_page)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
{
|
|
|
|
struct qxl_device *qdev;
|
|
|
|
struct qxl_ttm_tt *gtt;
|
|
|
|
|
|
|
|
qdev = qxl_get_qdev(bdev);
|
|
|
|
gtt = kzalloc(sizeof(struct qxl_ttm_tt), GFP_KERNEL);
|
|
|
|
if (gtt == NULL)
|
|
|
|
return NULL;
|
|
|
|
gtt->ttm.ttm.func = &qxl_backend_func;
|
|
|
|
gtt->qdev = qdev;
|
|
|
|
if (ttm_dma_tt_init(>t->ttm, bdev, size, page_flags,
|
|
|
|
dummy_read_page)) {
|
|
|
|
kfree(gtt);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
return >t->ttm.ttm;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void qxl_move_null(struct ttm_buffer_object *bo,
|
|
|
|
struct ttm_mem_reg *new_mem)
|
|
|
|
{
|
|
|
|
struct ttm_mem_reg *old_mem = &bo->mem;
|
|
|
|
|
|
|
|
BUG_ON(old_mem->mm_node != NULL);
|
|
|
|
*old_mem = *new_mem;
|
|
|
|
new_mem->mm_node = NULL;
|
|
|
|
}
|
|
|
|
|
2017-04-26 14:31:14 +00:00
|
|
|
static int qxl_bo_move(struct ttm_buffer_object *bo, bool evict,
|
|
|
|
struct ttm_operation_ctx *ctx,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
struct ttm_mem_reg *new_mem)
|
|
|
|
{
|
|
|
|
struct ttm_mem_reg *old_mem = &bo->mem;
|
2016-06-06 08:17:53 +00:00
|
|
|
int ret;
|
|
|
|
|
2017-04-26 14:31:14 +00:00
|
|
|
ret = ttm_bo_wait(bo, ctx->interruptible, ctx->no_wait_gpu);
|
2016-06-06 08:17:53 +00:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
if (old_mem->mem_type == TTM_PL_SYSTEM && bo->ttm == NULL) {
|
|
|
|
qxl_move_null(bo, new_mem);
|
|
|
|
return 0;
|
|
|
|
}
|
2017-04-26 14:31:14 +00:00
|
|
|
return ttm_bo_move_memcpy(bo, ctx->interruptible, ctx->no_wait_gpu,
|
2016-08-08 03:28:26 +00:00
|
|
|
new_mem);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void qxl_bo_move_notify(struct ttm_buffer_object *bo,
|
2016-12-15 16:23:49 +00:00
|
|
|
bool evict,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
struct ttm_mem_reg *new_mem)
|
|
|
|
{
|
|
|
|
struct qxl_bo *qbo;
|
|
|
|
struct qxl_device *qdev;
|
|
|
|
|
|
|
|
if (!qxl_ttm_bo_is_qxl_bo(bo))
|
|
|
|
return;
|
2015-12-15 11:20:56 +00:00
|
|
|
qbo = to_qxl_bo(bo);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
qdev = qbo->gem_base.dev->dev_private;
|
|
|
|
|
2016-09-12 11:34:37 +00:00
|
|
|
if (bo->mem.mem_type == TTM_PL_PRIV && qbo->surface_id)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
qxl_surface_evict(qdev, qbo, new_mem ? true : false);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct ttm_bo_driver qxl_bo_driver = {
|
|
|
|
.ttm_tt_create = &qxl_ttm_tt_create,
|
|
|
|
.ttm_tt_populate = &qxl_ttm_tt_populate,
|
|
|
|
.ttm_tt_unpopulate = &qxl_ttm_tt_unpopulate,
|
|
|
|
.invalidate_caches = &qxl_invalidate_caches,
|
|
|
|
.init_mem_type = &qxl_init_mem_type,
|
2016-08-30 15:26:04 +00:00
|
|
|
.eviction_valuable = ttm_bo_eviction_valuable,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
.evict_flags = &qxl_evict_flags,
|
|
|
|
.move = &qxl_bo_move,
|
|
|
|
.verify_access = &qxl_verify_access,
|
|
|
|
.io_mem_reserve = &qxl_ttm_io_mem_reserve,
|
|
|
|
.io_mem_free = &qxl_ttm_io_mem_free,
|
2017-03-28 14:54:50 +00:00
|
|
|
.io_mem_pfn = ttm_bo_default_io_mem_pfn,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
.move_notify = &qxl_bo_move_notify,
|
|
|
|
};
|
|
|
|
|
|
|
|
int qxl_ttm_init(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
int num_io_pages; /* != rom->num_io_pages, we include surface0 */
|
|
|
|
|
|
|
|
r = qxl_ttm_global_init(qdev);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
/* No others user of address space so set it to 0 */
|
|
|
|
r = ttm_bo_device_init(&qdev->mman.bdev,
|
|
|
|
qdev->mman.bo_global_ref.ref.object,
|
2013-08-13 17:10:30 +00:00
|
|
|
&qxl_bo_driver,
|
2017-01-27 01:05:48 +00:00
|
|
|
qdev->ddev.anon_inode->i_mapping,
|
2013-08-13 17:10:30 +00:00
|
|
|
DRM_FILE_PAGE_OFFSET, 0);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
if (r) {
|
|
|
|
DRM_ERROR("failed initializing buffer object driver(%d).\n", r);
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
/* NOTE: this includes the framebuffer (aka surface 0) */
|
|
|
|
num_io_pages = qdev->rom->ram_header_offset / PAGE_SIZE;
|
|
|
|
r = ttm_bo_init_mm(&qdev->mman.bdev, TTM_PL_VRAM,
|
|
|
|
num_io_pages);
|
|
|
|
if (r) {
|
|
|
|
DRM_ERROR("Failed initializing VRAM heap.\n");
|
|
|
|
return r;
|
|
|
|
}
|
2016-09-12 11:34:37 +00:00
|
|
|
r = ttm_bo_init_mm(&qdev->mman.bdev, TTM_PL_PRIV,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
qdev->surfaceram_size / PAGE_SIZE);
|
|
|
|
if (r) {
|
|
|
|
DRM_ERROR("Failed initializing Surfaces heap.\n");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
DRM_INFO("qxl: %uM of VRAM memory size\n",
|
|
|
|
(unsigned)qdev->vram_size / (1024 * 1024));
|
|
|
|
DRM_INFO("qxl: %luM of IO pages memory ready (VRAM domain)\n",
|
|
|
|
((unsigned)num_io_pages * PAGE_SIZE) / (1024 * 1024));
|
2013-10-11 08:01:11 +00:00
|
|
|
DRM_INFO("qxl: %uM of Surface memory size\n",
|
|
|
|
(unsigned)qdev->surfaceram_size / (1024 * 1024));
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_ttm_fini(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
ttm_bo_clean_mm(&qdev->mman.bdev, TTM_PL_VRAM);
|
2016-09-12 11:34:37 +00:00
|
|
|
ttm_bo_clean_mm(&qdev->mman.bdev, TTM_PL_PRIV);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
ttm_bo_device_release(&qdev->mman.bdev);
|
|
|
|
qxl_ttm_global_fini(qdev);
|
|
|
|
DRM_INFO("qxl: ttm finalized\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#define QXL_DEBUGFS_MEM_TYPES 2
|
|
|
|
|
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
|
|
static int qxl_mm_dump_table(struct seq_file *m, void *data)
|
|
|
|
{
|
|
|
|
struct drm_info_node *node = (struct drm_info_node *)m->private;
|
|
|
|
struct drm_mm *mm = (struct drm_mm *)node->info_ent->data;
|
|
|
|
struct drm_device *dev = node->minor->dev;
|
|
|
|
struct qxl_device *rdev = dev->dev_private;
|
|
|
|
struct ttm_bo_global *glob = rdev->mman.bdev.glob;
|
2016-12-29 11:09:24 +00:00
|
|
|
struct drm_printer p = drm_seq_file_printer(m);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
|
|
|
|
spin_lock(&glob->lru_lock);
|
2016-12-29 11:09:24 +00:00
|
|
|
drm_mm_print(mm, &p);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
spin_unlock(&glob->lru_lock);
|
2016-12-29 11:09:24 +00:00
|
|
|
return 0;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2017-01-19 13:48:05 +00:00
|
|
|
int qxl_ttm_debugfs_init(struct qxl_device *qdev)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
{
|
2013-04-18 01:47:40 +00:00
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
static struct drm_info_list qxl_mem_types_list[QXL_DEBUGFS_MEM_TYPES];
|
|
|
|
static char qxl_mem_types_names[QXL_DEBUGFS_MEM_TYPES][32];
|
|
|
|
unsigned i;
|
|
|
|
|
|
|
|
for (i = 0; i < QXL_DEBUGFS_MEM_TYPES; i++) {
|
|
|
|
if (i == 0)
|
|
|
|
sprintf(qxl_mem_types_names[i], "qxl_mem_mm");
|
|
|
|
else
|
|
|
|
sprintf(qxl_mem_types_names[i], "qxl_surf_mm");
|
|
|
|
qxl_mem_types_list[i].name = qxl_mem_types_names[i];
|
|
|
|
qxl_mem_types_list[i].show = &qxl_mm_dump_table;
|
|
|
|
qxl_mem_types_list[i].driver_features = 0;
|
|
|
|
if (i == 0)
|
|
|
|
qxl_mem_types_list[i].data = qdev->mman.bdev.man[TTM_PL_VRAM].priv;
|
|
|
|
else
|
2016-09-12 11:34:37 +00:00
|
|
|
qxl_mem_types_list[i].data = qdev->mman.bdev.man[TTM_PL_PRIV].priv;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
|
|
|
|
}
|
|
|
|
return qxl_debugfs_add_files(qdev, qxl_mem_types_list, i);
|
2013-04-18 01:47:40 +00:00
|
|
|
#else
|
|
|
|
return 0;
|
|
|
|
#endif
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 04:47:55 +00:00
|
|
|
}
|