linux/arch/arm/mach-iop13xx/Makefile

obj-y			:=
obj-m			:=
obj-n			:=
obj-			:=

obj-$(CONFIG_ARCH_IOP13XX) += setup.o
obj-$(CONFIG_ARCH_IOP13XX) += irq.o
obj-$(CONFIG_ARCH_IOP13XX) += pci.o
obj-$(CONFIG_ARCH_IOP13XX) += io.o
obj-$(CONFIG_ARCH_IOP13XX) += tpmi.o
obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
obj-$(CONFIG_PCI_MSI) += msi.o
[ARM] 3995/1: iop13xx: add iop13xx support The iop348 processor integrates an Xscale (XSC3 512KB L2 Cache) core with a Serial Attached SCSI (SAS) controller, multi-ported DDR2 memory controller, 3 Application Direct Memory Access (DMA) controllers, a 133Mhz PCI-X interface, a x8 PCI-Express interface, and other peripherals to form a system-on-a-chip RAID subsystem engine. The iop342 processor replaces the SAS controller with a second Xscale core for dual core embedded applications. The iop341 processor is the single core version of iop342. This patch supports the two Intel customer reference platforms iq81340mc for external storage and iq81340sc for direct attach (HBA) development. The developer's manual is available here: ftp://download.intel.com/design/iio/docs/31503701.pdf Changelog: * removed virtual addresses from resource definitions * cleaned up some unnecessary #include's Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2006-12-07 01:59:39 +00:00			`obj-y :=`
			`obj-m :=`
			`obj-n :=`
			`obj- :=`

			`obj-$(CONFIG_ARCH_IOP13XX) += setup.o`
			`obj-$(CONFIG_ARCH_IOP13XX) += irq.o`
			`obj-$(CONFIG_ARCH_IOP13XX) += pci.o`
			`obj-$(CONFIG_ARCH_IOP13XX) += io.o`
[ARM] 4342/2: iop13xx: add resource definitions for the tpmi units The tpmi units interface with the SAS controller on iop348. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2007-05-02 16:47:47 +00:00			`obj-$(CONFIG_ARCH_IOP13XX) += tpmi.o`
[ARM] 3995/1: iop13xx: add iop13xx support The iop348 processor integrates an Xscale (XSC3 512KB L2 Cache) core with a Serial Attached SCSI (SAS) controller, multi-ported DDR2 memory controller, 3 Application Direct Memory Access (DMA) controllers, a 133Mhz PCI-X interface, a x8 PCI-Express interface, and other peripherals to form a system-on-a-chip RAID subsystem engine. The iop342 processor replaces the SAS controller with a second Xscale core for dual core embedded applications. The iop341 processor is the single core version of iop342. This patch supports the two Intel customer reference platforms iq81340mc for external storage and iq81340sc for direct attach (HBA) development. The developer's manual is available here: ftp://download.intel.com/design/iio/docs/31503701.pdf Changelog: * removed virtual addresses from resource definitions * cleaned up some unnecessary #include's Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2006-12-07 01:59:39 +00:00			`obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o`
			`obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o`
[ARM] iop13xx: msi support Enable devices to signal interrupts via PCI memory cycles. rev6: * fix enable/disable typo, Michael Ellerman rev5: * fix up ack, enable, and disable for iop13xx_msi_chip rev4: * move smp compile fix to separate patch * use dynamic_irq_init in create_irq() * hookup mask/unmask routines in iop13xx_msi_chip rev3: * change msi.c to use linux/smp.h instead of asm/smp.h * call dynamic_irq_cleanup at destroy_irq time rev2: * destroy_irq did not take the full 128 bits of msi_irq_in_use into account * added missing '&' for calls to test_and_set_bit and clear_bit [ebiederm@xmission.com: review comments/suggestions] [dan.j.williams@intel.com: cleanups/forward port to 2.6-git] Signed-off-by: Daniel Wolstenholme <daniel.e.wolstenholme@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2007-05-11 05:33:02 +00:00			`obj-$(CONFIG_PCI_MSI) += msi.o`