linux/arch/riscv/kernel/signal.c

321 lines
7.9 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
* Chen Liqin <liqin.chen@sunplusct.com>
* Lennox Wu <lennox.wu@sunplusct.com>
* Copyright (C) 2012 Regents of the University of California
*/
#include <linux/signal.h>
#include <linux/uaccess.h>
#include <linux/syscalls.h>
#include <linux/tracehook.h>
#include <linux/linkage.h>
#include <asm/ucontext.h>
#include <asm/vdso.h>
#include <asm/switch_to.h>
#include <asm/csr.h>
extern u32 __user_rt_sigreturn[2];
#define DEBUG_SIG 0
struct rt_sigframe {
struct siginfo info;
struct ucontext uc;
#ifndef CONFIG_MMU
u32 sigreturn_code[2];
#endif
};
#ifdef CONFIG_FPU
static long restore_fp_state(struct pt_regs *regs,
union __riscv_fp_state __user *sc_fpregs)
{
long err;
struct __riscv_d_ext_state __user *state = &sc_fpregs->d;
size_t i;
err = __copy_from_user(&current->thread.fstate, state, sizeof(*state));
if (unlikely(err))
return err;
fstate_restore(current, regs);
/* We support no other extension state at this time. */
for (i = 0; i < ARRAY_SIZE(sc_fpregs->q.reserved); i++) {
u32 value;
err = __get_user(value, &sc_fpregs->q.reserved[i]);
if (unlikely(err))
break;
if (value != 0)
return -EINVAL;
}
return err;
}
static long save_fp_state(struct pt_regs *regs,
union __riscv_fp_state __user *sc_fpregs)
{
long err;
struct __riscv_d_ext_state __user *state = &sc_fpregs->d;
size_t i;
fstate_save(current, regs);
err = __copy_to_user(state, &current->thread.fstate, sizeof(*state));
if (unlikely(err))
return err;
/* We support no other extension state at this time. */
for (i = 0; i < ARRAY_SIZE(sc_fpregs->q.reserved); i++) {
err = __put_user(0, &sc_fpregs->q.reserved[i]);
if (unlikely(err))
break;
}
return err;
}
#else
#define save_fp_state(task, regs) (0)
#define restore_fp_state(task, regs) (0)
#endif
static long restore_sigcontext(struct pt_regs *regs,
struct sigcontext __user *sc)
{
long err;
/* sc_regs is structured the same as the start of pt_regs */
err = __copy_from_user(regs, &sc->sc_regs, sizeof(sc->sc_regs));
/* Restore the floating-point state. */
if (has_fpu)
err |= restore_fp_state(regs, &sc->sc_fpregs);
return err;
}
SYSCALL_DEFINE0(rt_sigreturn)
{
struct pt_regs *regs = current_pt_regs();
struct rt_sigframe __user *frame;
struct task_struct *task;
sigset_t set;
/* Always make any pending restarted system calls return -EINTR */
current->restart_block.fn = do_no_restart_syscall;
frame = (struct rt_sigframe __user *)regs->sp;
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok(frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
set_current_blocked(&set);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (restore_altstack(&frame->uc.uc_stack))
goto badframe;
return regs->a0;
badframe:
task = current;
if (show_unhandled_signals) {
pr_info_ratelimited(
"%s[%d]: bad frame in %s: frame=%p pc=%p sp=%p\n",
task->comm, task_pid_nr(task), __func__,
frame, (void *)regs->epc, (void *)regs->sp);
}
force_sig(SIGSEGV);
return 0;
}
static long setup_sigcontext(struct rt_sigframe __user *frame,
struct pt_regs *regs)
{
struct sigcontext __user *sc = &frame->uc.uc_mcontext;
long err;
/* sc_regs is structured the same as the start of pt_regs */
err = __copy_to_user(&sc->sc_regs, regs, sizeof(sc->sc_regs));
/* Save the floating-point state. */
if (has_fpu)
err |= save_fp_state(regs, &sc->sc_fpregs);
return err;
}
static inline void __user *get_sigframe(struct ksignal *ksig,
struct pt_regs *regs, size_t framesize)
{
unsigned long sp;
/* Default to using normal stack */
sp = regs->sp;
/*
* If we are on the alternate signal stack and would overflow it, don't.
* Return an always-bogus address instead so we will die with SIGSEGV.
*/
if (on_sig_stack(sp) && !likely(on_sig_stack(sp - framesize)))
return (void __user __force *)(-1UL);
/* This is the X/Open sanctioned signal stack switching. */
sp = sigsp(sp, ksig) - framesize;
/* Align the stack frame. */
sp &= ~0xfUL;
return (void __user *)sp;
}
static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
long err = 0;
frame = get_sigframe(ksig, regs, sizeof(*frame));
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok(frame, sizeof(*frame)))
return -EFAULT;
err |= copy_siginfo_to_user(&frame->info, &ksig->info);
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(NULL, &frame->uc.uc_link);
err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
err |= setup_sigcontext(frame, regs);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
return -EFAULT;
/* Set up to return from userspace. */
#ifdef CONFIG_MMU
regs->ra = (unsigned long)VDSO_SYMBOL(
current->mm->context.vdso, rt_sigreturn);
#else
/*
* For the nommu case we don't have a VDSO. Instead we push two
* instructions to call the rt_sigreturn syscall onto the user stack.
*/
if (copy_to_user(&frame->sigreturn_code, __user_rt_sigreturn,
sizeof(frame->sigreturn_code)))
return -EFAULT;
regs->ra = (unsigned long)&frame->sigreturn_code;
#endif /* CONFIG_MMU */
/*
* Set up registers for signal handler.
* Registers that we don't modify keep the value they had from
* user-space at the time we took the signal.
* We always pass siginfo and mcontext, regardless of SA_SIGINFO,
* since some things rely on this (e.g. glibc's debug/segfault.c).
*/
regs->epc = (unsigned long)ksig->ka.sa.sa_handler;
regs->sp = (unsigned long)frame;
regs->a0 = ksig->sig; /* a0: signal number */
regs->a1 = (unsigned long)(&frame->info); /* a1: siginfo pointer */
regs->a2 = (unsigned long)(&frame->uc); /* a2: ucontext pointer */
#if DEBUG_SIG
pr_info("SIG deliver (%s:%d): sig=%d pc=%p ra=%p sp=%p\n",
current->comm, task_pid_nr(current), ksig->sig,
(void *)regs->epc, (void *)regs->ra, frame);
#endif
return 0;
}
static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
{
sigset_t *oldset = sigmask_to_save();
int ret;
/* Are we from a system call? */
if (regs->cause == EXC_SYSCALL) {
/* Avoid additional syscall restarting via ret_from_exception */
regs->cause = -1UL;
/* If so, check system call restarting.. */
switch (regs->a0) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->a0 = -EINTR;
break;
case -ERESTARTSYS:
if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
regs->a0 = -EINTR;
break;
}
fallthrough;
case -ERESTARTNOINTR:
regs->a0 = regs->orig_a0;
regs->epc -= 0x4;
break;
}
}
/* Set up the stack frame */
ret = setup_rt_frame(ksig, oldset, regs);
signal_setup_done(ret, ksig, 0);
}
static void do_signal(struct pt_regs *regs)
{
struct ksignal ksig;
if (get_signal(&ksig)) {
/* Actually deliver the signal */
handle_signal(&ksig, regs);
return;
}
/* Did we come from a system call? */
if (regs->cause == EXC_SYSCALL) {
/* Avoid additional syscall restarting via ret_from_exception */
regs->cause = -1UL;
/* Restart the system call - no handlers present */
switch (regs->a0) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->a0 = regs->orig_a0;
regs->epc -= 0x4;
break;
case -ERESTART_RESTARTBLOCK:
regs->a0 = regs->orig_a0;
regs->a7 = __NR_restart_syscall;
regs->epc -= 0x4;
break;
}
}
/*
* If there is no signal to deliver, we just put the saved
* sigmask back.
*/
restore_saved_sigmask();
}
/*
* notification of userspace execution resumption
* - triggered by the _TIF_WORK_MASK flags
*/
riscv: for C functions called only from assembly, mark with __visible Rather than adding prototypes for C functions called only by assembly code, mark them as __visible. This avoids adding prototypes that will never be used by the callers. Resolves the following sparse warnings: arch/riscv/kernel/irq.c:27:29: warning: symbol 'do_IRQ' was not declared. Should it be static? arch/riscv/kernel/ptrace.c:151:6: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static? arch/riscv/kernel/ptrace.c:165:6: warning: symbol 'do_syscall_trace_exit' was not declared. Should it be static? arch/riscv/kernel/signal.c:295:17: warning: symbol 'do_notify_resume' was not declared. Should it be static? arch/riscv/kernel/traps.c:92:1: warning: symbol 'do_trap_unknown' was not declared. Should it be static? arch/riscv/kernel/traps.c:94:1: warning: symbol 'do_trap_insn_misaligned' was not declared. Should it be static? arch/riscv/kernel/traps.c:96:1: warning: symbol 'do_trap_insn_fault' was not declared. Should it be static? arch/riscv/kernel/traps.c:98:1: warning: symbol 'do_trap_insn_illegal' was not declared. Should it be static? arch/riscv/kernel/traps.c:100:1: warning: symbol 'do_trap_load_misaligned' was not declared. Should it be static? arch/riscv/kernel/traps.c:102:1: warning: symbol 'do_trap_load_fault' was not declared. Should it be static? arch/riscv/kernel/traps.c:104:1: warning: symbol 'do_trap_store_misaligned' was not declared. Should it be static? arch/riscv/kernel/traps.c:106:1: warning: symbol 'do_trap_store_fault' was not declared. Should it be static? arch/riscv/kernel/traps.c:108:1: warning: symbol 'do_trap_ecall_u' was not declared. Should it be static? arch/riscv/kernel/traps.c:110:1: warning: symbol 'do_trap_ecall_s' was not declared. Should it be static? arch/riscv/kernel/traps.c:112:1: warning: symbol 'do_trap_ecall_m' was not declared. Should it be static? arch/riscv/kernel/traps.c:124:17: warning: symbol 'do_trap_break' was not declared. Should it be static? arch/riscv/kernel/smpboot.c:136:24: warning: symbol 'smp_callin' was not declared. Should it be static? Based on a suggestion from Luc Van Oostenryck. This version includes changes based on feedback from Christoph Hellwig <hch@lst.de>. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> # for do_syscall_trace_*
2019-10-18 05:20:05 +00:00
asmlinkage __visible void do_notify_resume(struct pt_regs *regs,
unsigned long thread_info_flags)
{
/* Handle pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
do_signal(regs);
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
}
}