linux/fs/netfs/direct_write.c

171 lines
4.6 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/* Unbuffered and direct write support.
*
* Copyright (C) 2023 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*/
#include <linux/export.h>
#include <linux/uio.h>
#include "internal.h"
static void netfs_cleanup_dio_write(struct netfs_io_request *wreq)
{
struct inode *inode = wreq->inode;
unsigned long long end = wreq->start + wreq->len;
if (!wreq->error &&
i_size_read(inode) < end) {
if (wreq->netfs_ops->update_i_size)
wreq->netfs_ops->update_i_size(inode, end);
else
i_size_write(inode, end);
}
}
/*
* Perform an unbuffered write where we may have to do an RMW operation on an
* encrypted file. This can also be used for direct I/O writes.
*/
ssize_t netfs_unbuffered_write_iter_locked(struct kiocb *iocb, struct iov_iter *iter,
struct netfs_group *netfs_group)
{
struct netfs_io_request *wreq;
unsigned long long start = iocb->ki_pos;
unsigned long long end = start + iov_iter_count(iter);
ssize_t ret, n;
bool async = !is_sync_kiocb(iocb);
_enter("");
/* We're going to need a bounce buffer if what we transmit is going to
* be different in some way to the source buffer, e.g. because it gets
* encrypted/compressed or because it needs expanding to a block size.
*/
// TODO
_debug("uw %llx-%llx", start, end);
wreq = netfs_alloc_request(iocb->ki_filp->f_mapping, iocb->ki_filp,
start, end - start,
iocb->ki_flags & IOCB_DIRECT ?
NETFS_DIO_WRITE : NETFS_UNBUFFERED_WRITE);
if (IS_ERR(wreq))
return PTR_ERR(wreq);
{
/* If this is an async op and we're not using a bounce buffer,
* we have to save the source buffer as the iterator is only
* good until we return. In such a case, extract an iterator
* to represent as much of the the output buffer as we can
* manage. Note that the extraction might not be able to
* allocate a sufficiently large bvec array and may shorten the
* request.
*/
if (async || user_backed_iter(iter)) {
n = netfs_extract_user_iter(iter, wreq->len, &wreq->iter, 0);
if (n < 0) {
ret = n;
goto out;
}
wreq->direct_bv = (struct bio_vec *)wreq->iter.bvec;
wreq->direct_bv_count = n;
wreq->direct_bv_unpin = iov_iter_extract_will_pin(iter);
wreq->len = iov_iter_count(&wreq->iter);
} else {
wreq->iter = *iter;
}
wreq->io_iter = wreq->iter;
}
/* Copy the data into the bounce buffer and encrypt it. */
// TODO
/* Dispatch the write. */
__set_bit(NETFS_RREQ_UPLOAD_TO_SERVER, &wreq->flags);
if (async)
wreq->iocb = iocb;
wreq->cleanup = netfs_cleanup_dio_write;
ret = netfs_begin_write(wreq, is_sync_kiocb(iocb),
iocb->ki_flags & IOCB_DIRECT ?
netfs_write_trace_dio_write :
netfs_write_trace_unbuffered_write);
if (ret < 0) {
_debug("begin = %zd", ret);
goto out;
}
if (!async) {
trace_netfs_rreq(wreq, netfs_rreq_trace_wait_ip);
wait_on_bit(&wreq->flags, NETFS_RREQ_IN_PROGRESS,
TASK_UNINTERRUPTIBLE);
ret = wreq->error;
_debug("waited = %zd", ret);
if (ret == 0) {
ret = wreq->transferred;
iocb->ki_pos += ret;
}
} else {
ret = -EIOCBQUEUED;
}
out:
netfs_put_request(wreq, false, netfs_rreq_trace_put_return);
return ret;
}
/**
* netfs_unbuffered_write_iter - Unbuffered write to a file
* @iocb: IO state structure
* @from: iov_iter with data to write
*
* Do an unbuffered write to a file, writing the data directly to the server
* and not lodging the data in the pagecache.
*
* Return:
* * Negative error code if no data has been written at all of
* vfs_fsync_range() failed for a synchronous write
* * Number of bytes written, even for truncated writes
*/
ssize_t netfs_unbuffered_write_iter(struct kiocb *iocb, struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
struct netfs_inode *ictx = netfs_inode(inode);
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
unsigned long long end;
ssize_t ret;
_enter("%llx,%zx,%llx", iocb->ki_pos, iov_iter_count(from), i_size_read(inode));
trace_netfs_write_iter(iocb, from);
ret = netfs_start_io_direct(inode);
if (ret < 0)
return ret;
ret = generic_write_checks(iocb, from);
if (ret < 0)
goto out;
ret = file_remove_privs(file);
if (ret < 0)
goto out;
ret = file_update_time(file);
if (ret < 0)
goto out;
ret = kiocb_invalidate_pages(iocb, iov_iter_count(from));
if (ret < 0)
goto out;
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
end = iocb->ki_pos + iov_iter_count(from);
if (end > ictx->zero_point)
ictx->zero_point = end;
fscache_invalidate(netfs_i_cookie(ictx), NULL, i_size_read(inode),
FSCACHE_INVAL_DIO_WRITE);
ret = netfs_unbuffered_write_iter_locked(iocb, from, NULL);
out:
netfs_end_io_direct(inode);
return ret;
}
EXPORT_SYMBOL(netfs_unbuffered_write_iter);