linux/kernel/printk/printk.c

3176 lines
81 KiB
C
Raw Normal View History

/*
* linux/kernel/printk.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Modified to make sys_syslog() more flexible: added commands to
* return the last 4k of kernel messages, regardless of whether
* they've been read or not. Added option to suppress kernel printk's
* to the console. Added hook for sending the console messages
* elsewhere, in preparation for a serial line console (someday).
* Ted Ts'o, 2/11/93.
* Modified for sysctl support, 1/8/97, Chris Horn.
* Fixed SMP synchronization, 08/08/99, Manfred Spraul
* manfred@colorfullife.com
* Rewrote bits to get rid of console_lock
* 01Mar01 Andrew Morton
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/console.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/nmi.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h> /* For in_interrupt() */
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/security.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/syscalls.h>
#include <linux/kexec.h>
#include <linux/kdb.h>
#include <linux/ratelimit.h>
#include <linux/kmsg_dump.h>
#include <linux/syslog.h>
printk: fix delayed messages from CPU hotplug events When a secondary CPU is being brought up, it is not uncommon for printk() to be invoked when cpu_online(smp_processor_id()) == 0. The case that I witnessed personally was on MIPS: http://lkml.org/lkml/2010/5/30/4 If (can_use_console() == 0), printk() will spool its output to log_buf and it will be visible in "dmesg", but that output will NOT be echoed to the console until somebody calls release_console_sem() from a CPU that is online. Therefore, the boot time messages from the new CPU can get stuck in "limbo" for a long time, and might suddenly appear on the screen when a completely unrelated event (e.g. "eth0: link is down") occurs. This patch modifies the console code so that any pending messages are automatically flushed out to the console whenever a CPU hotplug operation completes successfully or aborts. The issue was seen on 2.6.34. Original patch by Kevin Cernekee with cleanups by akpm and additional fixes by Santosh Shilimkar. This patch superseeds https://patchwork.linux-mips.org/patch/1357/. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> To: <mingo@elte.hu> To: <akpm@linux-foundation.org> To: <simon.kagstrom@netinsight.net> To: <David.Woodhouse@intel.com> To: <lethal@linux-sh.org> Cc: <linux-kernel@vger.kernel.org> Cc: <linux-mips@linux-mips.org> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1534/ LKML-Reference: <ede63b5a20af951c755736f035d1e787772d7c28@localhost> LKML-Reference: <EAF47CD23C76F840A9E7FCE10091EFAB02C5DB6D1F@dbde02.ent.ti.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-06-04 05:11:25 +00:00
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/rculist.h>
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
#include <linux/poll.h>
#include <linux/irq_work.h>
dump_stack: consolidate dump_stack() implementations and unify their behaviors Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:27:12 +00:00
#include <linux/utsname.h>
#include <linux/ctype.h>
#include <linux/uio.h>
#include <asm/uaccess.h>
#include <asm-generic/sections.h>
#define CREATE_TRACE_POINTS
#include <trace/events/printk.h>
#include "console_cmdline.h"
#include "braille.h"
printk/nmi: generic solution for safe printk in NMI printk() takes some locks and could not be used a safe way in NMI context. The chance of a deadlock is real especially when printing stacks from all CPUs. This particular problem has been addressed on x86 by the commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). The patchset brings two big advantages. First, it makes the NMI backtraces safe on all architectures for free. Second, it makes all NMI messages almost safe on all architectures (the temporary buffer is limited. We still should keep the number of messages in NMI context at minimum). Note that there already are several messages printed in NMI context: WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE handlers. These are not easy to avoid. This patch reuses most of the code and makes it generic. It is useful for all messages and architectures that support NMI. The alternative printk_func is set when entering and is reseted when leaving NMI context. It queues IRQ work to copy the messages into the main ring buffer in a safe context. __printk_nmi_flush() copies all available messages and reset the buffer. Then we could use a simple cmpxchg operations to get synchronized with writers. There is also used a spinlock to get synchronized with other flushers. We do not longer use seq_buf because it depends on external lock. It would be hard to make all supported operations safe for a lockless use. It would be confusing and error prone to make only some operations safe. The code is put into separate printk/nmi.c as suggested by Steven Rostedt. It needs a per-CPU buffer and is compiled only on architectures that call nmi_enter(). This is achieved by the new HAVE_NMI Kconfig flag. The are MN10300 and Xtensa architectures. We need to clean up NMI handling there first. Let's do it separately. The patch is heavily based on the draft from Peter Zijlstra, see https://lkml.org/lkml/2015/6/10/327 [arnd@arndb.de: printk-nmi: use %zu format string for size_t] [akpm@linux-foundation.org: min_t->min - all types are size_t here] Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part] Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Kosina <jkosina@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21 00:00:33 +00:00
#include "internal.h"
int console_printk[4] = {
CONSOLE_LOGLEVEL_DEFAULT, /* console_loglevel */
MESSAGE_LOGLEVEL_DEFAULT, /* default_message_loglevel */
CONSOLE_LOGLEVEL_MIN, /* minimum_console_loglevel */
CONSOLE_LOGLEVEL_DEFAULT, /* default_console_loglevel */
};
/*
* Low level drivers may need that to know if they can schedule in
* their unblank() callback or not. So let's export it.
*/
int oops_in_progress;
EXPORT_SYMBOL(oops_in_progress);
/*
* console_sem protects the console_drivers list, and also
* provides serialisation for access to the entire console
* driver system.
*/
static DEFINE_SEMAPHORE(console_sem);
struct console *console_drivers;
EXPORT_SYMBOL_GPL(console_drivers);
console: implement lockdep support for console_lock Dave Airlie recently discovered a locking bug in the fbcon layer, where a timer_del_sync (for the blinking cursor) deadlocks with the timer itself, since both (want to) hold the console_lock: https://lkml.org/lkml/2012/8/21/36 Unfortunately the console_lock isn't a plain mutex and hence has no lockdep support. Which resulted in a few days wasted of tracking down this bug (complicated by the fact that printk doesn't show anything when the console is locked) instead of noticing the bug much earlier with the lockdep splat. Hence I've figured I need to fix that for the next deadlock involving console_lock - and with kms/drm growing ever more complex locking that'll eventually happen. Now the console_lock has rather funky semantics, so after a quick irc discussion with Thomas Gleixner and Dave Airlie I've quickly ditched the original idead of switching to a real mutex (since it won't work) and instead opted to annotate the console_lock with lockdep information manually. There are a few special cases: - The console_lock state is protected by the console_sem, and usually grabbed/dropped at _lock/_unlock time. But the suspend/resume code drops the semaphore without dropping the console_lock (see suspend_console/resume_console). But since the same thread that did the suspend will do the resume, we don't need to fix up anything. - In the printk code there's a special trylock, only used to kick off the logbuffer printk'ing in console_unlock. But all that happens while lockdep is disable (since printk does a few other evil tricks). So no issue there, either. - The console_lock can also be acquired form irq context (but only with a trylock). lockdep already handles that. This all leaves us with annotating the normal console_lock, _unlock and _trylock functions. And yes, it works - simply unloading a drm kms driver resulted in lockdep complaining about the deadlock in fbcon_deinit: ====================================================== [ INFO: possible circular locking dependency detected ] 3.6.0-rc2+ #552 Not tainted ------------------------------------------------------- kms-reload/3577 is trying to acquire lock: ((&info->queue)){+.+...}, at: [<ffffffff81058c70>] wait_on_work+0x0/0xa7 but task is already holding lock: (console_lock){+.+.+.}, at: [<ffffffff81264686>] bind_con_driver+0x38/0x263 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (console_lock){+.+.+.}: [<ffffffff81087440>] lock_acquire+0x95/0x105 [<ffffffff81040190>] console_lock+0x59/0x5b [<ffffffff81209cb6>] fb_flashcursor+0x2e/0x12c [<ffffffff81057c3e>] process_one_work+0x1d9/0x3b4 [<ffffffff810584a2>] worker_thread+0x1a7/0x24b [<ffffffff8105ca29>] kthread+0x7f/0x87 [<ffffffff813b1204>] kernel_thread_helper+0x4/0x10 -> #0 ((&info->queue)){+.+...}: [<ffffffff81086cb3>] __lock_acquire+0x999/0xcf6 [<ffffffff81087440>] lock_acquire+0x95/0x105 [<ffffffff81058cab>] wait_on_work+0x3b/0xa7 [<ffffffff81058dd6>] __cancel_work_timer+0xbf/0x102 [<ffffffff81058e33>] cancel_work_sync+0xb/0xd [<ffffffff8120a3b3>] fbcon_deinit+0x11c/0x1dc [<ffffffff81264793>] bind_con_driver+0x145/0x263 [<ffffffff81264a45>] unbind_con_driver+0x14f/0x195 [<ffffffff8126540c>] store_bind+0x1ad/0x1c1 [<ffffffff8127cbb7>] dev_attr_store+0x13/0x1f [<ffffffff8116d884>] sysfs_write_file+0xe9/0x121 [<ffffffff811145b2>] vfs_write+0x9b/0xfd [<ffffffff811147b7>] sys_write+0x3e/0x6b [<ffffffff813b0039>] system_call_fastpath+0x16/0x1b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(console_lock); lock((&info->queue)); lock(console_lock); lock((&info->queue)); *** DEADLOCK *** v2: Mark the lockdep_map static, noticed by Jani Nikula. Cc: Dave Airlie <airlied@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-22 17:52:11 +00:00
#ifdef CONFIG_LOCKDEP
static struct lockdep_map console_lock_dep_map = {
.name = "console_lock"
};
#endif
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
/*
* Number of registered extended console drivers.
*
* If extended consoles are present, in-kernel cont reassembly is disabled
* and each fragment is stored as a separate log entry with proper
* continuation flag so that every emitted message has full metadata. This
* doesn't change the result for regular consoles or /proc/kmsg. For
* /dev/kmsg, as long as the reader concatenates messages according to
* consecutive continuation flags, the end result should be the same too.
*/
static int nr_ext_console_drivers;
/*
* Helper macros to handle lockdep when locking/unlocking console_sem. We use
* macros instead of functions so that _RET_IP_ contains useful information.
*/
#define down_console_sem() do { \
down(&console_sem);\
mutex_acquire(&console_lock_dep_map, 0, 0, _RET_IP_);\
} while (0)
static int __down_trylock_console_sem(unsigned long ip)
{
if (down_trylock(&console_sem))
return 1;
mutex_acquire(&console_lock_dep_map, 0, 1, ip);
return 0;
}
#define down_trylock_console_sem() __down_trylock_console_sem(_RET_IP_)
#define up_console_sem() do { \
mutex_release(&console_lock_dep_map, 1, _RET_IP_);\
up(&console_sem);\
} while (0)
/*
* This is used for debugging the mess that is the VT code by
* keeping track if we have the console semaphore held. It's
* definitely not the perfect debug tool (we don't know if _WE_
* hold it and are racing, but it helps tracking those weird code
* paths in the console code where we end up in places I want
* locked without the console sempahore held).
*/
static int console_locked, console_suspended;
/*
* If exclusive_console is non-NULL then only this console is to be printed to.
*/
static struct console *exclusive_console;
/*
* Array of consoles built from command line options (console=)
*/
#define MAX_CMDLINECONSOLES 8
static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES];
static int selected_console = -1;
static int preferred_console = -1;
int console_set_on_cmdline;
EXPORT_SYMBOL(console_set_on_cmdline);
/* Flag: console code may call schedule() */
static int console_may_schedule;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/*
* The printk log buffer consists of a chain of concatenated variable
* length records. Every record starts with a record header, containing
* the overall length of the record.
*
* The heads to the first and last entry in the buffer, as well as the
* sequence numbers of these entries are maintained when messages are
* stored.
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
*
* If the heads indicate available messages, the length in the header
* tells the start next message. A length == 0 for the next message
* indicates a wrap-around to the beginning of the buffer.
*
* Every record carries the monotonic timestamp in microseconds, as well as
* the standard userspace syslog level and syslog facility. The usual
* kernel messages use LOG_KERN; userspace-injected messages always carry
* a matching syslog facility, by default LOG_USER. The origin of every
* message can be reliably determined that way.
*
* The human readable log message directly follows the message header. The
* length of the message text is stored in the header, the stored message
* is not terminated.
*
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
* Optionally, a message can carry a dictionary of properties (key/value pairs),
* to provide userspace with a machine-readable message context.
*
* Examples for well-defined, commonly used property names are:
* DEVICE=b12:8 device identifier
* b12:8 block dev_t
* c127:3 char dev_t
* n8 netdev ifindex
* +sound:card0 subsystem:devname
* SUBSYSTEM=pci driver-core subsystem name
*
* Valid characters in property names are [a-zA-Z0-9.-_]. The plain text value
* follows directly after a '=' character. Every property is terminated by
* a '\0' character. The last property is not terminated.
*
* Example of a message structure:
* 0000 ff 8f 00 00 00 00 00 00 monotonic time in nsec
* 0008 34 00 record is 52 bytes long
* 000a 0b 00 text is 11 bytes long
* 000c 1f 00 dictionary is 23 bytes long
* 000e 03 00 LOG_KERN (facility) LOG_ERR (level)
* 0010 69 74 27 73 20 61 20 6c "it's a l"
* 69 6e 65 "ine"
* 001b 44 45 56 49 43 "DEVIC"
* 45 3d 62 38 3a 32 00 44 "E=b8:2\0D"
* 52 49 56 45 52 3d 62 75 "RIVER=bu"
* 67 "g"
* 0032 00 00 00 padding to next message header
*
* The 'struct printk_log' buffer header must never be directly exported to
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
* userspace, it is a kernel-private implementation detail that might
* need to be changed in the future, when the requirements change.
*
* /dev/kmsg exports the structured data in the following line format:
* "<level>,<sequnum>,<timestamp>,<contflag>[,additional_values, ... ];<message text>\n"
*
* Users of the export format should ignore possible additional values
* separated by ',', and find the message after the ';' character.
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
*
* The optional key/value pairs are attached as continuation lines starting
* with a space character and terminated by a newline. All possible
* non-prinatable characters are escaped in the "\xff" notation.
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
*/
enum log_flags {
LOG_NOCONS = 1, /* already flushed, do not print to console */
LOG_NEWLINE = 2, /* text ended with a newline */
LOG_PREFIX = 4, /* text started with a prefix */
LOG_CONT = 8, /* text is a fragment of a continuation line */
};
struct printk_log {
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
u64 ts_nsec; /* timestamp in nanoseconds */
u16 len; /* length of entire record */
u16 text_len; /* length of text buffer */
u16 dict_len; /* length of dictionary buffer */
u8 facility; /* syslog facility */
u8 flags:5; /* internal record flags */
u8 level:3; /* syslog level */
}
#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
__packed __aligned(4)
#endif
;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/*
printk: remove separate printk_sched buffers and use printk buf instead To prevent deadlocks with doing a printk inside the scheduler, printk_sched() was created. The issue is that printk has a console_sem that it can grab and release. The release does a wake up if there's a task pending on the sem, and this wake up grabs the rq locks that is held in the scheduler. This leads to a possible deadlock if the wake up uses the same rq as the one with the rq lock held already. What printk_sched() does is to save the printk write in a per cpu buffer and sets the PRINTK_PENDING_SCHED flag. On a timer tick, if this flag is set, the printk() is done against the buffer. There's a couple of issues with this approach. 1) If two printk_sched()s are called before the tick, the second one will overwrite the first one. 2) The temporary buffer is 512 bytes and is per cpu. This is a quite a bit of space wasted for something that is seldom used. In order to remove this, the printk_sched() can use the printk buffer instead, and delay the console_trylock()/console_unlock() to the queued work. Because printk_sched() would then be taking the logbuf_lock, the logbuf_lock must not be held while doing anything that may call into the scheduler functions, which includes wake ups. Unfortunately, printk() also has a console_sem that it uses, and on release, the up(&console_sem) may do a wake up of any pending waiters. This must be avoided while holding the logbuf_lock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:38 +00:00
* The logbuf_lock protects kmsg buffer, indices, counters. This can be taken
* within the scheduler's rq lock. It must be released before calling
* console_unlock() or anything else that might wake up a process.
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
*/
static DEFINE_RAW_SPINLOCK(logbuf_lock);
#ifdef CONFIG_PRINTK
DECLARE_WAIT_QUEUE_HEAD(log_wait);
/* the next printk record to read by syslog(READ) or /proc/kmsg */
static u64 syslog_seq;
static u32 syslog_idx;
static enum log_flags syslog_prev;
static size_t syslog_partial;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* index and sequence number of the first record stored in the buffer */
static u64 log_first_seq;
static u32 log_first_idx;
/* index and sequence number of the next record to store in the buffer */
static u64 log_next_seq;
static u32 log_next_idx;
/* the next printk record to write to the console */
static u64 console_seq;
static u32 console_idx;
static enum log_flags console_prev;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* the next printk record to read after the last 'clear' command */
static u64 clear_seq;
static u32 clear_idx;
#define PREFIX_MAX 32
#define LOG_LINE_MAX (1024 - PREFIX_MAX)
printk: prevent userland from spoofing kernel messages The following statement of ABI/testing/dev-kmsg is not quite right: It is not possible to inject messages from userspace with the facility number LOG_KERN (0), to make sure that the origin of the messages can always be reliably determined. Userland actually can inject messages with a facility of 0 by abusing the fact that the facility is stored in a u8 data type. By using a facility which is a multiple of 256 the assignment of msg->facility in log_store() implicitly truncates it to 0, i.e. LOG_KERN, allowing users of /dev/kmsg to spoof kernel messages as shown below: The following call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0 >/dev/kmsg ...leads to the following log entry (dmesg -x | tail -n 1): user :emerg : [ 66.137758] Kernel panic - not syncing: beer empty However, this call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0x800 >/dev/kmsg ...leads to the slightly different log entry (note the kernel facility): kern :emerg : [ 74.177343] Kernel panic - not syncing: beer empty Fix that by limiting the user provided facility to 8 bit right from the beginning and catch the truncation early. Fixes: 7ff9554bb578 ("printk: convert byte-buffer to variable-length...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Alex Elder <elder@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:30:38 +00:00
#define LOG_LEVEL(v) ((v) & 0x07)
#define LOG_FACILITY(v) ((v) >> 3 & 0xff)
/* record buffer */
#define LOG_ALIGN __alignof__(struct printk_log)
#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
static char *log_buf = __log_buf;
static u32 log_buf_len = __LOG_BUF_LEN;
/* Return log buffer address */
char *log_buf_addr_get(void)
{
return log_buf;
}
/* Return log buffer size */
u32 log_buf_len_get(void)
{
return log_buf_len;
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* human readable text of the record */
static char *log_text(const struct printk_log *msg)
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
{
return (char *)msg + sizeof(struct printk_log);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
/* optional key/value pair dictionary attached to the record */
static char *log_dict(const struct printk_log *msg)
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
{
return (char *)msg + sizeof(struct printk_log) + msg->text_len;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
/* get record by index; idx must point to valid msg */
static struct printk_log *log_from_idx(u32 idx)
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
{
struct printk_log *msg = (struct printk_log *)(log_buf + idx);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/*
* A length == 0 record is the end of buffer marker. Wrap around and
* read the message at the start of the buffer.
*/
if (!msg->len)
return (struct printk_log *)log_buf;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
return msg;
}
/* get next record; idx must point to valid msg */
static u32 log_next(u32 idx)
{
struct printk_log *msg = (struct printk_log *)(log_buf + idx);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* length == 0 indicates the end of the buffer; wrap */
/*
* A length == 0 record is the end of buffer marker. Wrap around and
* read the message at the start of the buffer as *this* one, and
* return the one after that.
*/
if (!msg->len) {
msg = (struct printk_log *)log_buf;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
return msg->len;
}
return idx + msg->len;
}
printk: ignore too long messages There was no check for too long messages. The check for free space always passed when first_seq and next_seq were equal. Enough free space was not guaranteed, though. log_store() might be called to store messages up to 64kB + 64kB + 16B. This is sum of maximal text_len, dict_len values, and the size of the structure printk_log. On the other hand, the minimal size for the main log buffer currently is 4kB and it is enforced only by Kconfig. The good news is that the usage looks safe right now. log_store() is called only from vprintk_emit() and cont_flush(). Here the "text" part is always passed via a static buffer and the length is limited to LOG_LINE_MAX which is 1024. The "dict" part is NULL in most cases. The only exceptions is when vprintk_emit() is called from printk_emit() and dev_vprintk_emit(). But printk_emit() is currently used only in devkmsg_writev() and here "dict" is NULL as well. In dev_vprintk_emit(), "dict" is limited by the static buffer "hdr" of the size 128 bytes. It meas that the current maximal printed text is 1024B + 128B + 16B and it always fit the log buffer. But it is only matter of time when someone calls printk_emit() with unsafe parameters, especially the "dict" one. This patch adds a check for the free space when the buffer is empty. It reuses the already existing log_has_space() function but it has to add an extra parameter. It defines whether the buffer is empty. Note that the same values of "first_idx" and "next_idx" might also mean that the buffer is full. If the buffer is empty, we must respect the current position of the indexes. We cannot reset them to the beginning of the buffer. Otherwise, the functions reading the buffer would get crazy. The question is what to do when the message is too long. This patch uses the easiest solution and just ignores the problematic message. Let's do something better in a followup patch. Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:30 +00:00
/*
* Check whether there is enough free space for the given message.
*
* The same values of first_idx and next_idx mean that the buffer
* is either empty or full.
*
* If the buffer is empty, we must respect the position of the indexes.
* They cannot be reset to the beginning of the buffer.
*/
static int logbuf_has_space(u32 msg_size, bool empty)
{
u32 free;
printk: ignore too long messages There was no check for too long messages. The check for free space always passed when first_seq and next_seq were equal. Enough free space was not guaranteed, though. log_store() might be called to store messages up to 64kB + 64kB + 16B. This is sum of maximal text_len, dict_len values, and the size of the structure printk_log. On the other hand, the minimal size for the main log buffer currently is 4kB and it is enforced only by Kconfig. The good news is that the usage looks safe right now. log_store() is called only from vprintk_emit() and cont_flush(). Here the "text" part is always passed via a static buffer and the length is limited to LOG_LINE_MAX which is 1024. The "dict" part is NULL in most cases. The only exceptions is when vprintk_emit() is called from printk_emit() and dev_vprintk_emit(). But printk_emit() is currently used only in devkmsg_writev() and here "dict" is NULL as well. In dev_vprintk_emit(), "dict" is limited by the static buffer "hdr" of the size 128 bytes. It meas that the current maximal printed text is 1024B + 128B + 16B and it always fit the log buffer. But it is only matter of time when someone calls printk_emit() with unsafe parameters, especially the "dict" one. This patch adds a check for the free space when the buffer is empty. It reuses the already existing log_has_space() function but it has to add an extra parameter. It defines whether the buffer is empty. Note that the same values of "first_idx" and "next_idx" might also mean that the buffer is full. If the buffer is empty, we must respect the current position of the indexes. We cannot reset them to the beginning of the buffer. Otherwise, the functions reading the buffer would get crazy. The question is what to do when the message is too long. This patch uses the easiest solution and just ignores the problematic message. Let's do something better in a followup patch. Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:30 +00:00
if (log_next_idx > log_first_idx || empty)
free = max(log_buf_len - log_next_idx, log_first_idx);
else
free = log_first_idx - log_next_idx;
/*
* We need space also for an empty header that signalizes wrapping
* of the buffer.
*/
return free >= msg_size + sizeof(struct printk_log);
}
printk: ignore too long messages There was no check for too long messages. The check for free space always passed when first_seq and next_seq were equal. Enough free space was not guaranteed, though. log_store() might be called to store messages up to 64kB + 64kB + 16B. This is sum of maximal text_len, dict_len values, and the size of the structure printk_log. On the other hand, the minimal size for the main log buffer currently is 4kB and it is enforced only by Kconfig. The good news is that the usage looks safe right now. log_store() is called only from vprintk_emit() and cont_flush(). Here the "text" part is always passed via a static buffer and the length is limited to LOG_LINE_MAX which is 1024. The "dict" part is NULL in most cases. The only exceptions is when vprintk_emit() is called from printk_emit() and dev_vprintk_emit(). But printk_emit() is currently used only in devkmsg_writev() and here "dict" is NULL as well. In dev_vprintk_emit(), "dict" is limited by the static buffer "hdr" of the size 128 bytes. It meas that the current maximal printed text is 1024B + 128B + 16B and it always fit the log buffer. But it is only matter of time when someone calls printk_emit() with unsafe parameters, especially the "dict" one. This patch adds a check for the free space when the buffer is empty. It reuses the already existing log_has_space() function but it has to add an extra parameter. It defines whether the buffer is empty. Note that the same values of "first_idx" and "next_idx" might also mean that the buffer is full. If the buffer is empty, we must respect the current position of the indexes. We cannot reset them to the beginning of the buffer. Otherwise, the functions reading the buffer would get crazy. The question is what to do when the message is too long. This patch uses the easiest solution and just ignores the problematic message. Let's do something better in a followup patch. Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:30 +00:00
static int log_make_free_space(u32 msg_size)
{
while (log_first_seq < log_next_seq &&
!logbuf_has_space(msg_size, false)) {
/* drop old messages until we have enough contiguous space */
log_first_idx = log_next(log_first_idx);
log_first_seq++;
}
printk: ignore too long messages There was no check for too long messages. The check for free space always passed when first_seq and next_seq were equal. Enough free space was not guaranteed, though. log_store() might be called to store messages up to 64kB + 64kB + 16B. This is sum of maximal text_len, dict_len values, and the size of the structure printk_log. On the other hand, the minimal size for the main log buffer currently is 4kB and it is enforced only by Kconfig. The good news is that the usage looks safe right now. log_store() is called only from vprintk_emit() and cont_flush(). Here the "text" part is always passed via a static buffer and the length is limited to LOG_LINE_MAX which is 1024. The "dict" part is NULL in most cases. The only exceptions is when vprintk_emit() is called from printk_emit() and dev_vprintk_emit(). But printk_emit() is currently used only in devkmsg_writev() and here "dict" is NULL as well. In dev_vprintk_emit(), "dict" is limited by the static buffer "hdr" of the size 128 bytes. It meas that the current maximal printed text is 1024B + 128B + 16B and it always fit the log buffer. But it is only matter of time when someone calls printk_emit() with unsafe parameters, especially the "dict" one. This patch adds a check for the free space when the buffer is empty. It reuses the already existing log_has_space() function but it has to add an extra parameter. It defines whether the buffer is empty. Note that the same values of "first_idx" and "next_idx" might also mean that the buffer is full. If the buffer is empty, we must respect the current position of the indexes. We cannot reset them to the beginning of the buffer. Otherwise, the functions reading the buffer would get crazy. The question is what to do when the message is too long. This patch uses the easiest solution and just ignores the problematic message. Let's do something better in a followup patch. Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:30 +00:00
if (clear_seq < log_first_seq) {
clear_seq = log_first_seq;
clear_idx = log_first_idx;
}
printk: ignore too long messages There was no check for too long messages. The check for free space always passed when first_seq and next_seq were equal. Enough free space was not guaranteed, though. log_store() might be called to store messages up to 64kB + 64kB + 16B. This is sum of maximal text_len, dict_len values, and the size of the structure printk_log. On the other hand, the minimal size for the main log buffer currently is 4kB and it is enforced only by Kconfig. The good news is that the usage looks safe right now. log_store() is called only from vprintk_emit() and cont_flush(). Here the "text" part is always passed via a static buffer and the length is limited to LOG_LINE_MAX which is 1024. The "dict" part is NULL in most cases. The only exceptions is when vprintk_emit() is called from printk_emit() and dev_vprintk_emit(). But printk_emit() is currently used only in devkmsg_writev() and here "dict" is NULL as well. In dev_vprintk_emit(), "dict" is limited by the static buffer "hdr" of the size 128 bytes. It meas that the current maximal printed text is 1024B + 128B + 16B and it always fit the log buffer. But it is only matter of time when someone calls printk_emit() with unsafe parameters, especially the "dict" one. This patch adds a check for the free space when the buffer is empty. It reuses the already existing log_has_space() function but it has to add an extra parameter. It defines whether the buffer is empty. Note that the same values of "first_idx" and "next_idx" might also mean that the buffer is full. If the buffer is empty, we must respect the current position of the indexes. We cannot reset them to the beginning of the buffer. Otherwise, the functions reading the buffer would get crazy. The question is what to do when the message is too long. This patch uses the easiest solution and just ignores the problematic message. Let's do something better in a followup patch. Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:30 +00:00
/* sequence numbers are equal, so the log buffer is empty */
if (logbuf_has_space(msg_size, log_first_seq == log_next_seq))
printk: ignore too long messages There was no check for too long messages. The check for free space always passed when first_seq and next_seq were equal. Enough free space was not guaranteed, though. log_store() might be called to store messages up to 64kB + 64kB + 16B. This is sum of maximal text_len, dict_len values, and the size of the structure printk_log. On the other hand, the minimal size for the main log buffer currently is 4kB and it is enforced only by Kconfig. The good news is that the usage looks safe right now. log_store() is called only from vprintk_emit() and cont_flush(). Here the "text" part is always passed via a static buffer and the length is limited to LOG_LINE_MAX which is 1024. The "dict" part is NULL in most cases. The only exceptions is when vprintk_emit() is called from printk_emit() and dev_vprintk_emit(). But printk_emit() is currently used only in devkmsg_writev() and here "dict" is NULL as well. In dev_vprintk_emit(), "dict" is limited by the static buffer "hdr" of the size 128 bytes. It meas that the current maximal printed text is 1024B + 128B + 16B and it always fit the log buffer. But it is only matter of time when someone calls printk_emit() with unsafe parameters, especially the "dict" one. This patch adds a check for the free space when the buffer is empty. It reuses the already existing log_has_space() function but it has to add an extra parameter. It defines whether the buffer is empty. Note that the same values of "first_idx" and "next_idx" might also mean that the buffer is full. If the buffer is empty, we must respect the current position of the indexes. We cannot reset them to the beginning of the buffer. Otherwise, the functions reading the buffer would get crazy. The question is what to do when the message is too long. This patch uses the easiest solution and just ignores the problematic message. Let's do something better in a followup patch. Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:30 +00:00
return 0;
return -ENOMEM;
}
/* compute the message size including the padding bytes */
static u32 msg_used_size(u16 text_len, u16 dict_len, u32 *pad_len)
{
u32 size;
size = sizeof(struct printk_log) + text_len + dict_len;
*pad_len = (-size) & (LOG_ALIGN - 1);
size += *pad_len;
return size;
}
/*
* Define how much of the log buffer we could take at maximum. The value
* must be greater than two. Note that only half of the buffer is available
* when the index points to the middle.
*/
#define MAX_LOG_TAKE_PART 4
static const char trunc_msg[] = "<truncated>";
static u32 truncate_msg(u16 *text_len, u16 *trunc_msg_len,
u16 *dict_len, u32 *pad_len)
{
/*
* The message should not take the whole buffer. Otherwise, it might
* get removed too soon.
*/
u32 max_text_len = log_buf_len / MAX_LOG_TAKE_PART;
if (*text_len > max_text_len)
*text_len = max_text_len;
/* enable the warning message */
*trunc_msg_len = strlen(trunc_msg);
/* disable the "dict" completely */
*dict_len = 0;
/* compute the size again, count also the warning message */
return msg_used_size(*text_len + *trunc_msg_len, 0, pad_len);
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* insert record into the buffer, discard old ones, update heads */
static int log_store(int facility, int level,
enum log_flags flags, u64 ts_nsec,
const char *dict, u16 dict_len,
const char *text, u16 text_len)
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
{
struct printk_log *msg;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
u32 size, pad_len;
u16 trunc_msg_len = 0;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* number of '\0' padding bytes to next message */
size = msg_used_size(text_len, dict_len, &pad_len);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (log_make_free_space(size)) {
/* truncate the message if it is too long for empty buffer */
size = truncate_msg(&text_len, &trunc_msg_len,
&dict_len, &pad_len);
/* survive when the log buffer is too small for trunc_msg */
if (log_make_free_space(size))
return 0;
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (log_next_idx + size + sizeof(struct printk_log) > log_buf_len) {
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/*
* This message + an additional empty header does not fit
* at the end of the buffer. Add an empty header with len == 0
* to signify a wrap around.
*/
memset(log_buf + log_next_idx, 0, sizeof(struct printk_log));
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
log_next_idx = 0;
}
/* fill message */
msg = (struct printk_log *)(log_buf + log_next_idx);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
memcpy(log_text(msg), text, text_len);
msg->text_len = text_len;
if (trunc_msg_len) {
memcpy(log_text(msg) + text_len, trunc_msg, trunc_msg_len);
msg->text_len += trunc_msg_len;
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
memcpy(log_dict(msg), dict, dict_len);
msg->dict_len = dict_len;
msg->facility = facility;
msg->level = level & 7;
msg->flags = flags & 0x1f;
if (ts_nsec > 0)
msg->ts_nsec = ts_nsec;
else
msg->ts_nsec = local_clock();
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
memset(log_dict(msg) + dict_len, 0, pad_len);
msg->len = size;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* insert message */
log_next_idx += msg->len;
log_next_seq++;
return msg->text_len;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
int dmesg_restrict = IS_ENABLED(CONFIG_SECURITY_DMESG_RESTRICT);
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
static int syslog_action_restricted(int type)
{
if (dmesg_restrict)
return 1;
/*
* Unless restricted, we allow "read all" and "get buffer size"
* for everybody.
*/
return type != SYSLOG_ACTION_READ_ALL &&
type != SYSLOG_ACTION_SIZE_BUFFER;
}
int check_syslog_permissions(int type, int source)
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
{
/*
* If this is from /proc/kmsg and we've already opened it, then we've
* already done the capabilities checks at open time.
*/
if (source == SYSLOG_FROM_PROC && type != SYSLOG_ACTION_OPEN)
goto ok;
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
if (syslog_action_restricted(type)) {
if (capable(CAP_SYSLOG))
goto ok;
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
/*
* For historical reasons, accept CAP_SYS_ADMIN too, with
* a warning.
*/
if (capable(CAP_SYS_ADMIN)) {
pr_warn_once("%s (%d): Attempt to access syslog with "
"CAP_SYS_ADMIN but no CAP_SYSLOG "
"(deprecated).\n",
current->comm, task_pid_nr(current));
goto ok;
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
}
return -EPERM;
}
ok:
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
return security_syslog(type);
}
EXPORT_SYMBOL_GPL(check_syslog_permissions);
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
static void append_char(char **pp, char *e, char c)
{
if (*pp < e)
*(*pp)++ = c;
}
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
static ssize_t msg_print_ext_header(char *buf, size_t size,
struct printk_log *msg, u64 seq,
enum log_flags prev_flags)
{
u64 ts_usec = msg->ts_nsec;
char cont = '-';
do_div(ts_usec, 1000);
/*
* If we couldn't merge continuation line fragments during the print,
* export the stored flags to allow an optional external merge of the
* records. Merging the records isn't always neccessarily correct, like
* when we hit a race during printing. In most cases though, it produces
* better readable output. 'c' in the record flags mark the first
* fragment of a line, '+' the following.
*/
if (msg->flags & LOG_CONT && !(prev_flags & LOG_CONT))
cont = 'c';
else if ((msg->flags & LOG_CONT) ||
((prev_flags & LOG_CONT) && !(msg->flags & LOG_PREFIX)))
cont = '+';
return scnprintf(buf, size, "%u,%llu,%llu,%c;",
(msg->facility << 3) | msg->level, seq, ts_usec, cont);
}
static ssize_t msg_print_ext_body(char *buf, size_t size,
char *dict, size_t dict_len,
char *text, size_t text_len)
{
char *p = buf, *e = buf + size;
size_t i;
/* escape non-printable characters */
for (i = 0; i < text_len; i++) {
unsigned char c = text[i];
if (c < ' ' || c >= 127 || c == '\\')
p += scnprintf(p, e - p, "\\x%02x", c);
else
append_char(&p, e, c);
}
append_char(&p, e, '\n');
if (dict_len) {
bool line = true;
for (i = 0; i < dict_len; i++) {
unsigned char c = dict[i];
if (line) {
append_char(&p, e, ' ');
line = false;
}
if (c == '\0') {
append_char(&p, e, '\n');
line = true;
continue;
}
if (c < ' ' || c >= 127 || c == '\\') {
p += scnprintf(p, e - p, "\\x%02x", c);
continue;
}
append_char(&p, e, c);
}
append_char(&p, e, '\n');
}
return p - buf;
}
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
/* /dev/kmsg - userspace message inject/listen interface */
struct devkmsg_user {
u64 seq;
u32 idx;
enum log_flags prev;
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
struct mutex lock;
char buf[CONSOLE_EXT_LOG_MAX];
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
};
static ssize_t devkmsg_write(struct kiocb *iocb, struct iov_iter *from)
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
{
char *buf, *line;
int level = default_message_loglevel;
int facility = 1; /* LOG_USER */
size_t len = iov_iter_count(from);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
ssize_t ret = len;
if (len > LOG_LINE_MAX)
return -EINVAL;
buf = kmalloc(len+1, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
buf[len] = '\0';
if (copy_from_iter(buf, len, from) != len) {
kfree(buf);
return -EFAULT;
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
}
/*
* Extract and skip the syslog prefix <[0-9]*>. Coming from userspace
* the decimal value represents 32bit, the lower 3 bit are the log
* level, the rest are the log facility.
*
* If no prefix or no userspace facility is specified, we
* enforce LOG_USER, to be able to reliably distinguish
* kernel-generated messages from userspace-injected ones.
*/
line = buf;
if (line[0] == '<') {
char *endp = NULL;
printk: prevent userland from spoofing kernel messages The following statement of ABI/testing/dev-kmsg is not quite right: It is not possible to inject messages from userspace with the facility number LOG_KERN (0), to make sure that the origin of the messages can always be reliably determined. Userland actually can inject messages with a facility of 0 by abusing the fact that the facility is stored in a u8 data type. By using a facility which is a multiple of 256 the assignment of msg->facility in log_store() implicitly truncates it to 0, i.e. LOG_KERN, allowing users of /dev/kmsg to spoof kernel messages as shown below: The following call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0 >/dev/kmsg ...leads to the following log entry (dmesg -x | tail -n 1): user :emerg : [ 66.137758] Kernel panic - not syncing: beer empty However, this call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0x800 >/dev/kmsg ...leads to the slightly different log entry (note the kernel facility): kern :emerg : [ 74.177343] Kernel panic - not syncing: beer empty Fix that by limiting the user provided facility to 8 bit right from the beginning and catch the truncation early. Fixes: 7ff9554bb578 ("printk: convert byte-buffer to variable-length...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Alex Elder <elder@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:30:38 +00:00
unsigned int u;
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
printk: prevent userland from spoofing kernel messages The following statement of ABI/testing/dev-kmsg is not quite right: It is not possible to inject messages from userspace with the facility number LOG_KERN (0), to make sure that the origin of the messages can always be reliably determined. Userland actually can inject messages with a facility of 0 by abusing the fact that the facility is stored in a u8 data type. By using a facility which is a multiple of 256 the assignment of msg->facility in log_store() implicitly truncates it to 0, i.e. LOG_KERN, allowing users of /dev/kmsg to spoof kernel messages as shown below: The following call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0 >/dev/kmsg ...leads to the following log entry (dmesg -x | tail -n 1): user :emerg : [ 66.137758] Kernel panic - not syncing: beer empty However, this call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0x800 >/dev/kmsg ...leads to the slightly different log entry (note the kernel facility): kern :emerg : [ 74.177343] Kernel panic - not syncing: beer empty Fix that by limiting the user provided facility to 8 bit right from the beginning and catch the truncation early. Fixes: 7ff9554bb578 ("printk: convert byte-buffer to variable-length...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Alex Elder <elder@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:30:38 +00:00
u = simple_strtoul(line + 1, &endp, 10);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
if (endp && endp[0] == '>') {
printk: prevent userland from spoofing kernel messages The following statement of ABI/testing/dev-kmsg is not quite right: It is not possible to inject messages from userspace with the facility number LOG_KERN (0), to make sure that the origin of the messages can always be reliably determined. Userland actually can inject messages with a facility of 0 by abusing the fact that the facility is stored in a u8 data type. By using a facility which is a multiple of 256 the assignment of msg->facility in log_store() implicitly truncates it to 0, i.e. LOG_KERN, allowing users of /dev/kmsg to spoof kernel messages as shown below: The following call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0 >/dev/kmsg ...leads to the following log entry (dmesg -x | tail -n 1): user :emerg : [ 66.137758] Kernel panic - not syncing: beer empty However, this call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0x800 >/dev/kmsg ...leads to the slightly different log entry (note the kernel facility): kern :emerg : [ 74.177343] Kernel panic - not syncing: beer empty Fix that by limiting the user provided facility to 8 bit right from the beginning and catch the truncation early. Fixes: 7ff9554bb578 ("printk: convert byte-buffer to variable-length...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Alex Elder <elder@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 00:30:38 +00:00
level = LOG_LEVEL(u);
if (LOG_FACILITY(u) != 0)
facility = LOG_FACILITY(u);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
endp++;
len -= endp - line;
line = endp;
}
}
printk_emit(facility, level, NULL, 0, "%s", line);
kfree(buf);
return ret;
}
static ssize_t devkmsg_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct devkmsg_user *user = file->private_data;
struct printk_log *msg;
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
size_t len;
ssize_t ret;
if (!user)
return -EBADF;
printk: use mutex lock to stop syslog_seq from going wild Although syslog_seq and log_next_seq stuff are protected by logbuf_lock spin log, it's not enough. Say we have two processes A and B, and let syslog_seq = N, while log_next_seq = N + 1, and the two processes both come to syslog_print at almost the same time. And No matter which process get the spin lock first, it will increase syslog_seq by one, then release spin lock; thus later, another process increase syslog_seq by one again. In this case, syslog_seq is bigger than syslog_next_seq. And latter, it would make: wait_event_interruptiable(log_wait, syslog != log_next_seq) don't wait any more even there is no new write comes. Thus it introduce a infinite loop reading. I can easily see this kind of issue by the following steps: # cat /proc/kmsg # at meantime, I don't kill rsyslog # So they are the two processes. # xinit # I added drm.debug=6 in the kernel parameter line, # so that it will produce lots of message and let that # issue happen It's 100% reproducable on my side. And my disk will be filled up by /var/log/messages in a quite short time. So, introduce a mutex_lock to stop syslog_seq from going wild just like what devkmsg_read() does. It does fix this issue as expected. v2: use mutex_lock_interruptiable() instead (comments from Kay) Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Fengguang Wu <fengguang.wu@intel.com> Acked-By: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-16 13:21:51 +00:00
ret = mutex_lock_interruptible(&user->lock);
if (ret)
return ret;
raw_spin_lock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
while (user->seq == log_next_seq) {
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
raw_spin_unlock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
goto out;
}
raw_spin_unlock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
ret = wait_event_interruptible(log_wait,
user->seq != log_next_seq);
if (ret)
goto out;
raw_spin_lock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
}
if (user->seq < log_first_seq) {
/* our last seen message is gone, return error and reset */
user->idx = log_first_idx;
user->seq = log_first_seq;
ret = -EPIPE;
raw_spin_unlock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
goto out;
}
msg = log_from_idx(user->idx);
len = msg_print_ext_header(user->buf, sizeof(user->buf),
msg, user->seq, user->prev);
len += msg_print_ext_body(user->buf + len, sizeof(user->buf) - len,
log_dict(msg), msg->dict_len,
log_text(msg), msg->text_len);
user->prev = msg->flags;
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
user->idx = log_next(user->idx);
user->seq++;
raw_spin_unlock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
if (len > count) {
ret = -EINVAL;
goto out;
}
if (copy_to_user(buf, user->buf, len)) {
ret = -EFAULT;
goto out;
}
ret = len;
out:
mutex_unlock(&user->lock);
return ret;
}
static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence)
{
struct devkmsg_user *user = file->private_data;
loff_t ret = 0;
if (!user)
return -EBADF;
if (offset)
return -ESPIPE;
raw_spin_lock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
switch (whence) {
case SEEK_SET:
/* the first record */
user->idx = log_first_idx;
user->seq = log_first_seq;
break;
case SEEK_DATA:
/*
* The first record after the last SYSLOG_ACTION_CLEAR,
* like issued by 'dmesg -c'. Reading /dev/kmsg itself
* changes no global state, and does not clear anything.
*/
user->idx = clear_idx;
user->seq = clear_seq;
break;
case SEEK_END:
/* after the last record */
user->idx = log_next_idx;
user->seq = log_next_seq;
break;
default:
ret = -EINVAL;
}
raw_spin_unlock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
return ret;
}
static unsigned int devkmsg_poll(struct file *file, poll_table *wait)
{
struct devkmsg_user *user = file->private_data;
int ret = 0;
if (!user)
return POLLERR|POLLNVAL;
poll_wait(file, &log_wait, wait);
raw_spin_lock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
if (user->seq < log_next_seq) {
/* return error when data has vanished underneath us */
if (user->seq < log_first_seq)
ret = POLLIN|POLLRDNORM|POLLERR|POLLPRI;
else
ret = POLLIN|POLLRDNORM;
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
}
raw_spin_unlock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
return ret;
}
static int devkmsg_open(struct inode *inode, struct file *file)
{
struct devkmsg_user *user;
int err;
/* write-only does not need any file context */
if ((file->f_flags & O_ACCMODE) == O_WRONLY)
return 0;
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
err = check_syslog_permissions(SYSLOG_ACTION_READ_ALL,
SYSLOG_FROM_READER);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
if (err)
return err;
user = kmalloc(sizeof(struct devkmsg_user), GFP_KERNEL);
if (!user)
return -ENOMEM;
mutex_init(&user->lock);
raw_spin_lock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
user->idx = log_first_idx;
user->seq = log_first_seq;
raw_spin_unlock_irq(&logbuf_lock);
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
file->private_data = user;
return 0;
}
static int devkmsg_release(struct inode *inode, struct file *file)
{
struct devkmsg_user *user = file->private_data;
if (!user)
return 0;
mutex_destroy(&user->lock);
kfree(user);
return 0;
}
const struct file_operations kmsg_fops = {
.open = devkmsg_open,
.read = devkmsg_read,
.write_iter = devkmsg_write,
kmsg: export printk records to the /dev/kmsg interface Support for multiple concurrent readers of /dev/kmsg, with read(), seek(), poll() support. Output of message sequence numbers, to allow userspace log consumers to reliably reconnect and reconstruct their state at any given time. After open("/dev/kmsg"), read() always returns *all* buffered records. If only future messages should be read, SEEK_END can be used. In case records get overwritten while /dev/kmsg is held open, or records get faster overwritten than they are read, the next read() will return -EPIPE and the current reading position gets updated to the next available record. The passed sequence numbers allow the log consumer to calculate the amount of lost messages. [root@mop ~]# cat /dev/kmsg 5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ... 6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 7,160,424069;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) SUBSYSTEM=acpi DEVICE=+acpi:PNP0A03:00 6,339,5140900;NET: Registered protocol family 10 30,340,5690716;udevd[80]: starting version 181 6,341,6081421;FDC 0 is a S82078B 6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0 SUBSYSTEM=scsi DEVICE=+scsi:1:0:0:0 6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 Cc: Karel Zak <kzak@redhat.com> Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:41 +00:00
.llseek = devkmsg_llseek,
.poll = devkmsg_poll,
.release = devkmsg_release,
};
2015-09-09 22:38:55 +00:00
#ifdef CONFIG_KEXEC_CORE
/*
* This appends the listed symbols to /proc/vmcore
*
* /proc/vmcore is used by various utilities, like crash and makedumpfile to
* obtain access to symbols that are otherwise very difficult to locate. These
* symbols are specifically used so that utilities can access and extract the
* dmesg log from a vmcore file after a crash.
*/
void log_buf_kexec_setup(void)
{
VMCOREINFO_SYMBOL(log_buf);
VMCOREINFO_SYMBOL(log_buf_len);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
VMCOREINFO_SYMBOL(log_first_idx);
VMCOREINFO_SYMBOL(clear_idx);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
VMCOREINFO_SYMBOL(log_next_idx);
/*
* Export struct printk_log size and field offsets. User space tools can
* parse it and detect any changes to structure down the line.
*/
VMCOREINFO_STRUCT_SIZE(printk_log);
VMCOREINFO_OFFSET(printk_log, ts_nsec);
VMCOREINFO_OFFSET(printk_log, len);
VMCOREINFO_OFFSET(printk_log, text_len);
VMCOREINFO_OFFSET(printk_log, dict_len);
}
#endif
/* requested log_buf_len from kernel cmdline */
static unsigned long __initdata new_log_buf_len;
printk: move power of 2 practice of ring buffer size to a helper In practice the power of 2 practice of the size of the kernel ring buffer remains purely historical but not a requirement, specially now that we have LOG_ALIGN and use it for both static and dynamic allocations. It could have helped with implicit alignment back in the days given the even the dynamically sized ring buffer was guaranteed to be aligned so long as CONFIG_LOG_BUF_SHIFT was set to produce a __LOG_BUF_LEN which is architecture aligned, since log_buf_len=n would be allowed only if it was > __LOG_BUF_LEN and we always ended up rounding the log_buf_len=n to the next power of 2 with roundup_pow_of_two(), any multiple of 2 then should be also architecture aligned. These assumptions of course relied heavily on CONFIG_LOG_BUF_SHIFT producing an aligned value but users can always change this. We now have precise alignment requirements set for the log buffer size for both static and dynamic allocations, but lets upkeep the old practice of using powers of 2 for its size to help with easy expected scalable values and the allocators for dynamic allocations. We'll reuse this later so move this into a helper. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Arun KS <arunks.linux@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 23:08:52 +00:00
/* we practice scaling the ring buffer by powers of 2 */
static void __init log_buf_len_update(unsigned size)
{
if (size)
size = roundup_pow_of_two(size);
if (size > log_buf_len)
new_log_buf_len = size;
printk: move power of 2 practice of ring buffer size to a helper In practice the power of 2 practice of the size of the kernel ring buffer remains purely historical but not a requirement, specially now that we have LOG_ALIGN and use it for both static and dynamic allocations. It could have helped with implicit alignment back in the days given the even the dynamically sized ring buffer was guaranteed to be aligned so long as CONFIG_LOG_BUF_SHIFT was set to produce a __LOG_BUF_LEN which is architecture aligned, since log_buf_len=n would be allowed only if it was > __LOG_BUF_LEN and we always ended up rounding the log_buf_len=n to the next power of 2 with roundup_pow_of_two(), any multiple of 2 then should be also architecture aligned. These assumptions of course relied heavily on CONFIG_LOG_BUF_SHIFT producing an aligned value but users can always change this. We now have precise alignment requirements set for the log buffer size for both static and dynamic allocations, but lets upkeep the old practice of using powers of 2 for its size to help with easy expected scalable values and the allocators for dynamic allocations. We'll reuse this later so move this into a helper. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Arun KS <arunks.linux@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 23:08:52 +00:00
}
/* save requested log_buf_len since it's too early to process it */
static int __init log_buf_len_setup(char *str)
{
unsigned size = memparse(str, &str);
log_buf_len_update(size);
return 0;
}
early_param("log_buf_len", log_buf_len_setup);
#ifdef CONFIG_SMP
#define __LOG_CPU_MAX_BUF_LEN (1 << CONFIG_LOG_CPU_MAX_BUF_SHIFT)
printk: allow increasing the ring buffer depending on the number of CPUs The default size of the ring buffer is too small for machines with a large amount of CPUs under heavy load. What ends up happening when debugging is the ring buffer overlaps and chews up old messages making debugging impossible unless the size is passed as a kernel parameter. An idle system upon boot up will on average spew out only about one or two extra lines but where this really matters is on heavy load and that will vary widely depending on the system and environment. There are mechanisms to help increase the kernel ring buffer for tracing through debugfs, and those interfaces even allow growing the kernel ring buffer per CPU. We also have a static value which can be passed upon boot. Relying on debugfs however is not ideal for production, and relying on the value passed upon bootup is can only used *after* an issue has creeped up. Instead of being reactive this adds a proactive measure which lets you scale the amount of contributions you'd expect to the kernel ring buffer under load by each CPU in the worst case scenario. We use num_possible_cpus() to avoid complexities which could be introduced by dynamically changing the ring buffer size at run time, num_possible_cpus() lets us use the upper limit on possible number of CPUs therefore avoiding having to deal with hotplugging CPUs on and off. This introduces the kernel configuration option LOG_CPU_MAX_BUF_SHIFT which is used to specify the maximum amount of contributions to the kernel ring buffer in the worst case before the kernel ring buffer flips over, the size is specified as a power of 2. The total amount of contributions made by each CPU must be greater than half of the default kernel ring buffer size (1 << LOG_BUF_SHIFT bytes) in order to trigger an increase upon bootup. The kernel ring buffer is increased to the next power of two that would fit the required minimum kernel ring buffer size plus the additional CPU contribution. For example if LOG_BUF_SHIFT is 18 (256 KB) you'd require at least 128 KB contributions by other CPUs in order to trigger an increase of the kernel ring buffer. With a LOG_CPU_BUF_SHIFT of 12 (4 KB) you'd require at least anything over > 64 possible CPUs to trigger an increase. If you had 128 possible CPUs the amount of minimum required kernel ring buffer bumps to: ((1 << 18) + ((128 - 1) * (1 << 12))) / 1024 = 764 KB Since we require the ring buffer to be a power of two the new required size would be 1024 KB. This CPU contributions are ignored when the "log_buf_len" kernel parameter is used as it forces the exact size of the ring buffer to an expected power of two value. [pmladek@suse.cz: fix build] Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.cz> Tested-by: Davidlohr Bueso <davidlohr@hp.com> Tested-by: Petr Mladek <pmladek@suse.cz> Reviewed-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Arun KS <arunks.linux@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 23:08:56 +00:00
static void __init log_buf_add_cpu(void)
{
unsigned int cpu_extra;
/*
* archs should set up cpu_possible_bits properly with
* set_cpu_possible() after setup_arch() but just in
* case lets ensure this is valid.
*/
if (num_possible_cpus() == 1)
return;
cpu_extra = (num_possible_cpus() - 1) * __LOG_CPU_MAX_BUF_LEN;
/* by default this will only continue through for large > 64 CPUs */
if (cpu_extra <= __LOG_BUF_LEN / 2)
return;
pr_info("log_buf_len individual max cpu contribution: %d bytes\n",
__LOG_CPU_MAX_BUF_LEN);
pr_info("log_buf_len total cpu_extra contributions: %d bytes\n",
cpu_extra);
pr_info("log_buf_len min size: %d bytes\n", __LOG_BUF_LEN);
log_buf_len_update(cpu_extra + __LOG_BUF_LEN);
}
#else /* !CONFIG_SMP */
static inline void log_buf_add_cpu(void) {}
#endif /* CONFIG_SMP */
printk: allow increasing the ring buffer depending on the number of CPUs The default size of the ring buffer is too small for machines with a large amount of CPUs under heavy load. What ends up happening when debugging is the ring buffer overlaps and chews up old messages making debugging impossible unless the size is passed as a kernel parameter. An idle system upon boot up will on average spew out only about one or two extra lines but where this really matters is on heavy load and that will vary widely depending on the system and environment. There are mechanisms to help increase the kernel ring buffer for tracing through debugfs, and those interfaces even allow growing the kernel ring buffer per CPU. We also have a static value which can be passed upon boot. Relying on debugfs however is not ideal for production, and relying on the value passed upon bootup is can only used *after* an issue has creeped up. Instead of being reactive this adds a proactive measure which lets you scale the amount of contributions you'd expect to the kernel ring buffer under load by each CPU in the worst case scenario. We use num_possible_cpus() to avoid complexities which could be introduced by dynamically changing the ring buffer size at run time, num_possible_cpus() lets us use the upper limit on possible number of CPUs therefore avoiding having to deal with hotplugging CPUs on and off. This introduces the kernel configuration option LOG_CPU_MAX_BUF_SHIFT which is used to specify the maximum amount of contributions to the kernel ring buffer in the worst case before the kernel ring buffer flips over, the size is specified as a power of 2. The total amount of contributions made by each CPU must be greater than half of the default kernel ring buffer size (1 << LOG_BUF_SHIFT bytes) in order to trigger an increase upon bootup. The kernel ring buffer is increased to the next power of two that would fit the required minimum kernel ring buffer size plus the additional CPU contribution. For example if LOG_BUF_SHIFT is 18 (256 KB) you'd require at least 128 KB contributions by other CPUs in order to trigger an increase of the kernel ring buffer. With a LOG_CPU_BUF_SHIFT of 12 (4 KB) you'd require at least anything over > 64 possible CPUs to trigger an increase. If you had 128 possible CPUs the amount of minimum required kernel ring buffer bumps to: ((1 << 18) + ((128 - 1) * (1 << 12))) / 1024 = 764 KB Since we require the ring buffer to be a power of two the new required size would be 1024 KB. This CPU contributions are ignored when the "log_buf_len" kernel parameter is used as it forces the exact size of the ring buffer to an expected power of two value. [pmladek@suse.cz: fix build] Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.cz> Tested-by: Davidlohr Bueso <davidlohr@hp.com> Tested-by: Petr Mladek <pmladek@suse.cz> Reviewed-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Arun KS <arunks.linux@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 23:08:56 +00:00
void __init setup_log_buf(int early)
{
unsigned long flags;
char *new_log_buf;
int free;
printk: allow increasing the ring buffer depending on the number of CPUs The default size of the ring buffer is too small for machines with a large amount of CPUs under heavy load. What ends up happening when debugging is the ring buffer overlaps and chews up old messages making debugging impossible unless the size is passed as a kernel parameter. An idle system upon boot up will on average spew out only about one or two extra lines but where this really matters is on heavy load and that will vary widely depending on the system and environment. There are mechanisms to help increase the kernel ring buffer for tracing through debugfs, and those interfaces even allow growing the kernel ring buffer per CPU. We also have a static value which can be passed upon boot. Relying on debugfs however is not ideal for production, and relying on the value passed upon bootup is can only used *after* an issue has creeped up. Instead of being reactive this adds a proactive measure which lets you scale the amount of contributions you'd expect to the kernel ring buffer under load by each CPU in the worst case scenario. We use num_possible_cpus() to avoid complexities which could be introduced by dynamically changing the ring buffer size at run time, num_possible_cpus() lets us use the upper limit on possible number of CPUs therefore avoiding having to deal with hotplugging CPUs on and off. This introduces the kernel configuration option LOG_CPU_MAX_BUF_SHIFT which is used to specify the maximum amount of contributions to the kernel ring buffer in the worst case before the kernel ring buffer flips over, the size is specified as a power of 2. The total amount of contributions made by each CPU must be greater than half of the default kernel ring buffer size (1 << LOG_BUF_SHIFT bytes) in order to trigger an increase upon bootup. The kernel ring buffer is increased to the next power of two that would fit the required minimum kernel ring buffer size plus the additional CPU contribution. For example if LOG_BUF_SHIFT is 18 (256 KB) you'd require at least 128 KB contributions by other CPUs in order to trigger an increase of the kernel ring buffer. With a LOG_CPU_BUF_SHIFT of 12 (4 KB) you'd require at least anything over > 64 possible CPUs to trigger an increase. If you had 128 possible CPUs the amount of minimum required kernel ring buffer bumps to: ((1 << 18) + ((128 - 1) * (1 << 12))) / 1024 = 764 KB Since we require the ring buffer to be a power of two the new required size would be 1024 KB. This CPU contributions are ignored when the "log_buf_len" kernel parameter is used as it forces the exact size of the ring buffer to an expected power of two value. [pmladek@suse.cz: fix build] Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.cz> Tested-by: Davidlohr Bueso <davidlohr@hp.com> Tested-by: Petr Mladek <pmladek@suse.cz> Reviewed-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Arun KS <arunks.linux@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 23:08:56 +00:00
if (log_buf != __log_buf)
return;
if (!early && !new_log_buf_len)
log_buf_add_cpu();
if (!new_log_buf_len)
return;
if (early) {
new_log_buf =
printk: make dynamic kernel ring buffer alignment explicit We have to consider alignment for the ring buffer both for the default static size, and then also for when an dynamic allocation is made when the log_buf_len=n kernel parameter is passed to set the size specifically to a size larger than the default size set by the architecture through CONFIG_LOG_BUF_SHIFT. The default static kernel ring buffer can be aligned properly if architectures set CONFIG_LOG_BUF_SHIFT properly, we provide ranges for the size though so even if CONFIG_LOG_BUF_SHIFT has a sensible aligned value it can be reduced to a non aligned value. Commit 6ebb017de9 ("printk: Fix alignment of buf causing crash on ARM EABI") by Andrew Lunn ensures the static buffer is always aligned and the decision of alignment is done by the compiler by using __alignof__(struct log). When log_buf_len=n is used we allocate the ring buffer dynamically. Dynamic allocation varies, for the early allocation called before setup_arch() memblock_virt_alloc() requests a page aligment and for the default kernel allocation memblock_virt_alloc_nopanic() requests no special alignment, which in turn ends up aligning the allocation to SMP_CACHE_BYTES, which is L1 cache aligned. Since we already have the required alignment for the kernel ring buffer though we can do better and request explicit alignment for LOG_ALIGN. This does that to be safe and make dynamic allocation alignment explicit. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Tested-by: Petr Mladek <pmladek@suse.cz> Acked-by: Petr Mladek <pmladek@suse.cz> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Arun KS <arunks.linux@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 23:08:49 +00:00
memblock_virt_alloc(new_log_buf_len, LOG_ALIGN);
} else {
printk: make dynamic kernel ring buffer alignment explicit We have to consider alignment for the ring buffer both for the default static size, and then also for when an dynamic allocation is made when the log_buf_len=n kernel parameter is passed to set the size specifically to a size larger than the default size set by the architecture through CONFIG_LOG_BUF_SHIFT. The default static kernel ring buffer can be aligned properly if architectures set CONFIG_LOG_BUF_SHIFT properly, we provide ranges for the size though so even if CONFIG_LOG_BUF_SHIFT has a sensible aligned value it can be reduced to a non aligned value. Commit 6ebb017de9 ("printk: Fix alignment of buf causing crash on ARM EABI") by Andrew Lunn ensures the static buffer is always aligned and the decision of alignment is done by the compiler by using __alignof__(struct log). When log_buf_len=n is used we allocate the ring buffer dynamically. Dynamic allocation varies, for the early allocation called before setup_arch() memblock_virt_alloc() requests a page aligment and for the default kernel allocation memblock_virt_alloc_nopanic() requests no special alignment, which in turn ends up aligning the allocation to SMP_CACHE_BYTES, which is L1 cache aligned. Since we already have the required alignment for the kernel ring buffer though we can do better and request explicit alignment for LOG_ALIGN. This does that to be safe and make dynamic allocation alignment explicit. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Tested-by: Petr Mladek <pmladek@suse.cz> Acked-by: Petr Mladek <pmladek@suse.cz> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Arun KS <arunks.linux@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 23:08:49 +00:00
new_log_buf = memblock_virt_alloc_nopanic(new_log_buf_len,
LOG_ALIGN);
}
if (unlikely(!new_log_buf)) {
pr_err("log_buf_len: %ld bytes not available\n",
new_log_buf_len);
return;
}
raw_spin_lock_irqsave(&logbuf_lock, flags);
log_buf_len = new_log_buf_len;
log_buf = new_log_buf;
new_log_buf_len = 0;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
free = __LOG_BUF_LEN - log_next_idx;
memcpy(log_buf, __log_buf, __LOG_BUF_LEN);
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
pr_info("log_buf_len: %d bytes\n", log_buf_len);
pr_info("early log buf free: %d(%d%%)\n",
free, (free * 100) / __LOG_BUF_LEN);
}
static bool __read_mostly ignore_loglevel;
static int __init ignore_loglevel_setup(char *str)
{
ignore_loglevel = true;
pr_info("debug: ignoring loglevel setting.\n");
return 0;
}
early_param("ignore_loglevel", ignore_loglevel_setup);
module_param(ignore_loglevel, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ignore_loglevel,
"ignore loglevel setting (prints all kernel messages to the console)");
#ifdef CONFIG_BOOT_PRINTK_DELAY
static int boot_delay; /* msecs delay after each printk during bootup */
static unsigned long long loops_per_msec; /* based on boot_delay */
static int __init boot_delay_setup(char *str)
{
unsigned long lpj;
lpj = preset_lpj ? preset_lpj : 1000000; /* some guess */
loops_per_msec = (unsigned long long)lpj / 1000 * HZ;
get_option(&str, &boot_delay);
if (boot_delay > 10 * 1000)
boot_delay = 0;
pr_debug("boot_delay: %u, preset_lpj: %ld, lpj: %lu, "
"HZ: %d, loops_per_msec: %llu\n",
boot_delay, preset_lpj, lpj, HZ, loops_per_msec);
return 0;
}
early_param("boot_delay", boot_delay_setup);
static void boot_delay_msec(int level)
{
unsigned long long k;
unsigned long timeout;
if ((boot_delay == 0 || system_state != SYSTEM_BOOTING)
|| (level >= console_loglevel && !ignore_loglevel)) {
return;
}
k = (unsigned long long)loops_per_msec * boot_delay;
timeout = jiffies + msecs_to_jiffies(boot_delay);
while (k) {
k--;
cpu_relax();
/*
* use (volatile) jiffies to prevent
* compiler reduction; loop termination via jiffies
* is secondary and may or may not happen.
*/
if (time_after(jiffies, timeout))
break;
touch_nmi_watchdog();
}
}
#else
static inline void boot_delay_msec(int level)
{
}
#endif
static bool printk_time = IS_ENABLED(CONFIG_PRINTK_TIME);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
static size_t print_time(u64 ts, char *buf)
{
unsigned long rem_nsec;
if (!printk_time)
return 0;
printk: fix incorrect length from print_time() when seconds > 99999 print_prefix() passes a NULL buf to print_time() to get the length of the time prefix; when printk times are enabled, the current code just returns the constant 15, which matches the format "[%5lu.%06lu] " used to print the time value. However, this is obviously incorrect when the whole seconds part of the time gets beyond 5 digits (100000 seconds is a bit more than a day of uptime). The simple fix is to use snprintf(NULL, 0, ...) to calculate the actual length of the time prefix. This could be micro-optimized but it seems better to have simpler, more readable code here. The bug leads to the syslog system call miscomputing which messages fit into the userspace buffer. If there are enough messages to fill log_buf_len and some have a timestamp >= 100000, dmesg may fail with: # dmesg klogctl: Bad address When this happens, strace shows that the failure is indeed EFAULT due to the kernel mistakenly accessing past the end of dmesg's buffer, since dmesg asks the kernel how big a buffer it needs, allocates a bit more, and then gets an error when it asks the kernel to fill it: syslog(0xa, 0, 0) = 1048576 mmap(NULL, 1052672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa4d25d2000 syslog(0x3, 0x7fa4d25d2010, 0x100008) = -1 EFAULT (Bad address) As far as I can see, the bug has been there as long as print_time(), which comes from commit 084681d14e42 ("printk: flush continuation lines immediately to console") in 3.5-rc5. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Cc: Sylvain Munaut <s.munaut@whatever-company.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04 23:35:50 +00:00
rem_nsec = do_div(ts, 1000000000);
if (!buf)
printk: fix incorrect length from print_time() when seconds > 99999 print_prefix() passes a NULL buf to print_time() to get the length of the time prefix; when printk times are enabled, the current code just returns the constant 15, which matches the format "[%5lu.%06lu] " used to print the time value. However, this is obviously incorrect when the whole seconds part of the time gets beyond 5 digits (100000 seconds is a bit more than a day of uptime). The simple fix is to use snprintf(NULL, 0, ...) to calculate the actual length of the time prefix. This could be micro-optimized but it seems better to have simpler, more readable code here. The bug leads to the syslog system call miscomputing which messages fit into the userspace buffer. If there are enough messages to fill log_buf_len and some have a timestamp >= 100000, dmesg may fail with: # dmesg klogctl: Bad address When this happens, strace shows that the failure is indeed EFAULT due to the kernel mistakenly accessing past the end of dmesg's buffer, since dmesg asks the kernel how big a buffer it needs, allocates a bit more, and then gets an error when it asks the kernel to fill it: syslog(0xa, 0, 0) = 1048576 mmap(NULL, 1052672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa4d25d2000 syslog(0x3, 0x7fa4d25d2010, 0x100008) = -1 EFAULT (Bad address) As far as I can see, the bug has been there as long as print_time(), which comes from commit 084681d14e42 ("printk: flush continuation lines immediately to console") in 3.5-rc5. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Cc: Sylvain Munaut <s.munaut@whatever-company.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04 23:35:50 +00:00
return snprintf(NULL, 0, "[%5lu.000000] ", (unsigned long)ts);
return sprintf(buf, "[%5lu.%06lu] ",
(unsigned long)ts, rem_nsec / 1000);
}
static size_t print_prefix(const struct printk_log *msg, bool syslog, char *buf)
{
size_t len = 0;
unsigned int prefix = (msg->facility << 3) | msg->level;
if (syslog) {
if (buf) {
len += sprintf(buf, "<%u>", prefix);
} else {
len += 3;
if (prefix > 999)
len += 3;
else if (prefix > 99)
len += 2;
else if (prefix > 9)
len++;
}
}
len += print_time(msg->ts_nsec, buf ? buf + len : NULL);
return len;
}
static size_t msg_print_text(const struct printk_log *msg, enum log_flags prev,
bool syslog, char *buf, size_t size)
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
{
const char *text = log_text(msg);
size_t text_size = msg->text_len;
bool prefix = true;
bool newline = true;
size_t len = 0;
if ((prev & LOG_CONT) && !(msg->flags & LOG_PREFIX))
prefix = false;
if (msg->flags & LOG_CONT) {
if ((prev & LOG_CONT) && !(prev & LOG_NEWLINE))
prefix = false;
if (!(msg->flags & LOG_NEWLINE))
newline = false;
}
do {
const char *next = memchr(text, '\n', text_size);
size_t text_len;
if (next) {
text_len = next - text;
next++;
text_size -= next - text;
} else {
text_len = text_size;
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (buf) {
if (print_prefix(msg, syslog, NULL) +
text_len + 1 >= size - len)
break;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (prefix)
len += print_prefix(msg, syslog, buf + len);
memcpy(buf + len, text, text_len);
len += text_len;
if (next || newline)
buf[len++] = '\n';
} else {
/* SYSLOG_ACTION_* buffer size only calculation */
if (prefix)
len += print_prefix(msg, syslog, NULL);
len += text_len;
if (next || newline)
len++;
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
prefix = true;
text = next;
} while (text);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
return len;
}
static int syslog_print(char __user *buf, int size)
{
char *text;
struct printk_log *msg;
int len = 0;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (!text)
return -ENOMEM;
while (size > 0) {
size_t n;
size_t skip;
raw_spin_lock_irq(&logbuf_lock);
if (syslog_seq < log_first_seq) {
/* messages are gone, move to first one */
syslog_seq = log_first_seq;
syslog_idx = log_first_idx;
syslog_prev = 0;
syslog_partial = 0;
}
if (syslog_seq == log_next_seq) {
raw_spin_unlock_irq(&logbuf_lock);
break;
}
skip = syslog_partial;
msg = log_from_idx(syslog_idx);
n = msg_print_text(msg, syslog_prev, true, text,
LOG_LINE_MAX + PREFIX_MAX);
if (n - syslog_partial <= size) {
/* message fits into buffer, move forward */
syslog_idx = log_next(syslog_idx);
syslog_seq++;
syslog_prev = msg->flags;
n -= syslog_partial;
syslog_partial = 0;
} else if (!len){
/* partial read(), remember position */
n = size;
syslog_partial += n;
} else
n = 0;
raw_spin_unlock_irq(&logbuf_lock);
if (!n)
break;
if (copy_to_user(buf, text + skip, n)) {
if (!len)
len = -EFAULT;
break;
}
len += n;
size -= n;
buf += n;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
kfree(text);
return len;
}
static int syslog_print_all(char __user *buf, int size, bool clear)
{
char *text;
int len = 0;
text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (!text)
return -ENOMEM;
raw_spin_lock_irq(&logbuf_lock);
if (buf) {
u64 next_seq;
u64 seq;
u32 idx;
enum log_flags prev;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/*
* Find first record that fits, including all following records,
* into the user-provided buffer for this dump.
*/
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
seq = clear_seq;
idx = clear_idx;
prev = 0;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
while (seq < log_next_seq) {
struct printk_log *msg = log_from_idx(idx);
len += msg_print_text(msg, prev, true, NULL, 0);
prev = msg->flags;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
idx = log_next(idx);
seq++;
}
/* move first record forward until length fits into the buffer */
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
seq = clear_seq;
idx = clear_idx;
prev = 0;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
while (len > size && seq < log_next_seq) {
struct printk_log *msg = log_from_idx(idx);
len -= msg_print_text(msg, prev, true, NULL, 0);
prev = msg->flags;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
idx = log_next(idx);
seq++;
}
/* last message fitting into this dump */
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
next_seq = log_next_seq;
len = 0;
while (len >= 0 && seq < next_seq) {
struct printk_log *msg = log_from_idx(idx);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
int textlen;
textlen = msg_print_text(msg, prev, true, text,
LOG_LINE_MAX + PREFIX_MAX);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (textlen < 0) {
len = textlen;
break;
}
idx = log_next(idx);
seq++;
prev = msg->flags;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
raw_spin_unlock_irq(&logbuf_lock);
if (copy_to_user(buf + len, text, textlen))
len = -EFAULT;
else
len += textlen;
raw_spin_lock_irq(&logbuf_lock);
if (seq < log_first_seq) {
/* messages are gone, move to next one */
seq = log_first_seq;
idx = log_first_idx;
prev = 0;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
}
}
if (clear) {
clear_seq = log_next_seq;
clear_idx = log_next_idx;
}
raw_spin_unlock_irq(&logbuf_lock);
kfree(text);
return len;
}
int do_syslog(int type, char __user *buf, int len, int source)
{
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
bool clear = false;
static int saved_console_loglevel = LOGLEVEL_DEFAULT;
int error;
error = check_syslog_permissions(type, source);
if (error)
goto out;
switch (type) {
case SYSLOG_ACTION_CLOSE: /* Close log */
break;
case SYSLOG_ACTION_OPEN: /* Open log */
break;
case SYSLOG_ACTION_READ: /* Read from log */
error = -EINVAL;
if (!buf || len < 0)
goto out;
error = 0;
if (!len)
goto out;
if (!access_ok(VERIFY_WRITE, buf, len)) {
error = -EFAULT;
goto out;
}
error = wait_event_interruptible(log_wait,
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
syslog_seq != log_next_seq);
if (error)
goto out;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
error = syslog_print(buf, len);
break;
/* Read/clear last kernel messages */
case SYSLOG_ACTION_READ_CLEAR:
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
clear = true;
/* FALL THRU */
/* Read last kernel messages */
case SYSLOG_ACTION_READ_ALL:
error = -EINVAL;
if (!buf || len < 0)
goto out;
error = 0;
if (!len)
goto out;
if (!access_ok(VERIFY_WRITE, buf, len)) {
error = -EFAULT;
goto out;
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
error = syslog_print_all(buf, len, clear);
break;
/* Clear ring buffer */
case SYSLOG_ACTION_CLEAR:
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
syslog_print_all(NULL, 0, true);
break;
/* Disable logging to console */
case SYSLOG_ACTION_CONSOLE_OFF:
if (saved_console_loglevel == LOGLEVEL_DEFAULT)
printk: Restore previous console_loglevel when re-enabling logging When logging to console is disabled from userspace using klogctl() and later re-enabled, console_loglevel gets set to the default log level instead to the previous value. This means that if the kernel was booted with 'quiet', the boot is suddenly no longer quiet after logging to console gets re-enabled. Save the current console_loglevel when logging is disabled and restore to that value. If the log level is set to a specific value while disabled, this is interpreted as an implicit re-enabling of the logging. The problem that prompted this patch is described in: http://lkml.org/lkml/2009/6/28/234 There are two variations possible on the patch below: 1) If klogctl(7) is called while logging is not disabled, then set level to default (partially preserving current functionality): case 7: /* Enable logging to console */ - console_loglevel = default_console_loglevel; + if (saved_console_loglevel == -1) + console_loglevel = default_console_loglevel; + else { + console_loglevel = saved_console_loglevel; + saved_console_loglevel = -1; + } 2) If klogctl(8) is called while logging is disabled, then don't enable logging, but remember the requested value for when logging does get enabled again: case 8: /* Set level of messages printed to console */ [...] - console_loglevel = len; + if (saved_console_loglevel == -1) + console_loglevel = len; + else + saved_console_loglevel = len; Yet another option would be to ignore the request. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: cryptsetup@packages.debian.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <200907061331.49930.elendil@planet.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-06 11:31:48 +00:00
saved_console_loglevel = console_loglevel;
console_loglevel = minimum_console_loglevel;
break;
/* Enable logging to console */
case SYSLOG_ACTION_CONSOLE_ON:
if (saved_console_loglevel != LOGLEVEL_DEFAULT) {
printk: Restore previous console_loglevel when re-enabling logging When logging to console is disabled from userspace using klogctl() and later re-enabled, console_loglevel gets set to the default log level instead to the previous value. This means that if the kernel was booted with 'quiet', the boot is suddenly no longer quiet after logging to console gets re-enabled. Save the current console_loglevel when logging is disabled and restore to that value. If the log level is set to a specific value while disabled, this is interpreted as an implicit re-enabling of the logging. The problem that prompted this patch is described in: http://lkml.org/lkml/2009/6/28/234 There are two variations possible on the patch below: 1) If klogctl(7) is called while logging is not disabled, then set level to default (partially preserving current functionality): case 7: /* Enable logging to console */ - console_loglevel = default_console_loglevel; + if (saved_console_loglevel == -1) + console_loglevel = default_console_loglevel; + else { + console_loglevel = saved_console_loglevel; + saved_console_loglevel = -1; + } 2) If klogctl(8) is called while logging is disabled, then don't enable logging, but remember the requested value for when logging does get enabled again: case 8: /* Set level of messages printed to console */ [...] - console_loglevel = len; + if (saved_console_loglevel == -1) + console_loglevel = len; + else + saved_console_loglevel = len; Yet another option would be to ignore the request. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: cryptsetup@packages.debian.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <200907061331.49930.elendil@planet.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-06 11:31:48 +00:00
console_loglevel = saved_console_loglevel;
saved_console_loglevel = LOGLEVEL_DEFAULT;
printk: Restore previous console_loglevel when re-enabling logging When logging to console is disabled from userspace using klogctl() and later re-enabled, console_loglevel gets set to the default log level instead to the previous value. This means that if the kernel was booted with 'quiet', the boot is suddenly no longer quiet after logging to console gets re-enabled. Save the current console_loglevel when logging is disabled and restore to that value. If the log level is set to a specific value while disabled, this is interpreted as an implicit re-enabling of the logging. The problem that prompted this patch is described in: http://lkml.org/lkml/2009/6/28/234 There are two variations possible on the patch below: 1) If klogctl(7) is called while logging is not disabled, then set level to default (partially preserving current functionality): case 7: /* Enable logging to console */ - console_loglevel = default_console_loglevel; + if (saved_console_loglevel == -1) + console_loglevel = default_console_loglevel; + else { + console_loglevel = saved_console_loglevel; + saved_console_loglevel = -1; + } 2) If klogctl(8) is called while logging is disabled, then don't enable logging, but remember the requested value for when logging does get enabled again: case 8: /* Set level of messages printed to console */ [...] - console_loglevel = len; + if (saved_console_loglevel == -1) + console_loglevel = len; + else + saved_console_loglevel = len; Yet another option would be to ignore the request. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: cryptsetup@packages.debian.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <200907061331.49930.elendil@planet.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-06 11:31:48 +00:00
}
break;
/* Set level of messages printed to console */
case SYSLOG_ACTION_CONSOLE_LEVEL:
error = -EINVAL;
if (len < 1 || len > 8)
goto out;
if (len < minimum_console_loglevel)
len = minimum_console_loglevel;
console_loglevel = len;
printk: Restore previous console_loglevel when re-enabling logging When logging to console is disabled from userspace using klogctl() and later re-enabled, console_loglevel gets set to the default log level instead to the previous value. This means that if the kernel was booted with 'quiet', the boot is suddenly no longer quiet after logging to console gets re-enabled. Save the current console_loglevel when logging is disabled and restore to that value. If the log level is set to a specific value while disabled, this is interpreted as an implicit re-enabling of the logging. The problem that prompted this patch is described in: http://lkml.org/lkml/2009/6/28/234 There are two variations possible on the patch below: 1) If klogctl(7) is called while logging is not disabled, then set level to default (partially preserving current functionality): case 7: /* Enable logging to console */ - console_loglevel = default_console_loglevel; + if (saved_console_loglevel == -1) + console_loglevel = default_console_loglevel; + else { + console_loglevel = saved_console_loglevel; + saved_console_loglevel = -1; + } 2) If klogctl(8) is called while logging is disabled, then don't enable logging, but remember the requested value for when logging does get enabled again: case 8: /* Set level of messages printed to console */ [...] - console_loglevel = len; + if (saved_console_loglevel == -1) + console_loglevel = len; + else + saved_console_loglevel = len; Yet another option would be to ignore the request. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: cryptsetup@packages.debian.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <200907061331.49930.elendil@planet.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-06 11:31:48 +00:00
/* Implicitly re-enable logging to console */
saved_console_loglevel = LOGLEVEL_DEFAULT;
error = 0;
break;
/* Number of chars in the log buffer */
case SYSLOG_ACTION_SIZE_UNREAD:
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
raw_spin_lock_irq(&logbuf_lock);
if (syslog_seq < log_first_seq) {
/* messages are gone, move to first one */
syslog_seq = log_first_seq;
syslog_idx = log_first_idx;
syslog_prev = 0;
syslog_partial = 0;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
if (source == SYSLOG_FROM_PROC) {
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/*
* Short-cut for poll(/"proc/kmsg") which simply checks
* for pending data, not the size; return the count of
* records, not the length.
*/
error = log_next_seq - syslog_seq;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
} else {
u64 seq = syslog_seq;
u32 idx = syslog_idx;
enum log_flags prev = syslog_prev;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
error = 0;
while (seq < log_next_seq) {
struct printk_log *msg = log_from_idx(idx);
error += msg_print_text(msg, prev, true, NULL, 0);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
idx = log_next(idx);
seq++;
prev = msg->flags;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
error -= syslog_partial;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
raw_spin_unlock_irq(&logbuf_lock);
break;
/* Size of the log buffer */
case SYSLOG_ACTION_SIZE_BUFFER:
error = log_buf_len;
break;
default:
error = -EINVAL;
break;
}
out:
return error;
}
SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
{
kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Josh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 21:04:39 +00:00
return do_syslog(type, buf, len, SYSLOG_FROM_READER);
}
/*
* Call the console drivers, asking them to write out
* log_buf[start] to log_buf[end - 1].
* The console_lock must be held.
*/
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
static void call_console_drivers(int level,
const char *ext_text, size_t ext_len,
const char *text, size_t len)
{
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
struct console *con;
trace_console(text, len);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (level >= console_loglevel && !ignore_loglevel)
return;
if (!console_drivers)
return;
for_each_console(con) {
if (exclusive_console && con != exclusive_console)
continue;
if (!(con->flags & CON_ENABLED))
continue;
if (!con->write)
continue;
if (!cpu_online(smp_processor_id()) &&
!(con->flags & CON_ANYTIME))
continue;
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
if (con->flags & CON_EXTENDED)
con->write(con, ext_text, ext_len);
else
con->write(con, text, len);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
}
/*
* Zap console related locks when oopsing.
* To leave time for slow consoles to print a full oops,
* only zap at most once every 30 seconds.
*/
static void zap_locks(void)
{
static unsigned long oops_timestamp;
if (time_after_eq(jiffies, oops_timestamp) &&
!time_after(jiffies, oops_timestamp + 30 * HZ))
return;
oops_timestamp = jiffies;
debug_locks_off();
/* If a crash is occurring, make sure we can't deadlock */
raw_spin_lock_init(&logbuf_lock);
/* And make sure that we print immediately */
sema_init(&console_sem, 1);
}
int printk_delay_msec __read_mostly;
static inline void printk_delay(void)
{
if (unlikely(printk_delay_msec)) {
int m = printk_delay_msec;
while (m--) {
mdelay(1);
touch_nmi_watchdog();
}
}
}
/*
* Continuation lines are buffered, and not committed to the record buffer
* until the line is complete, or a race forces it. The line fragments
* though, are printed immediately to the consoles to ensure everything has
* reached the console in case of a kernel crash.
*/
static struct cont {
char buf[LOG_LINE_MAX];
size_t len; /* length == 0 means unused buffer */
size_t cons; /* bytes written to console */
struct task_struct *owner; /* task of first print*/
u64 ts_nsec; /* time of first print */
u8 level; /* log level of first message */
u8 facility; /* log facility of first message */
enum log_flags flags; /* prefix, newline flags */
bool flushed:1; /* buffer sealed and committed */
} cont;
static void cont_flush(enum log_flags flags)
{
if (cont.flushed)
return;
if (cont.len == 0)
return;
if (cont.cons) {
/*
* If a fragment of this line was directly flushed to the
* console; wait for the console to pick up the rest of the
* line. LOG_NOCONS suppresses a duplicated output.
*/
log_store(cont.facility, cont.level, flags | LOG_NOCONS,
cont.ts_nsec, NULL, 0, cont.buf, cont.len);
cont.flags = flags;
cont.flushed = true;
} else {
/*
* If no fragment of this line ever reached the console,
* just submit it to the store and free the buffer.
*/
log_store(cont.facility, cont.level, flags, 0,
NULL, 0, cont.buf, cont.len);
cont.len = 0;
}
}
static bool cont_add(int facility, int level, const char *text, size_t len)
{
if (cont.len && cont.flushed)
return false;
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
/*
* If ext consoles are present, flush and skip in-kernel
* continuation. See nr_ext_console_drivers definition. Also, if
* the line gets too long, split it up in separate records.
*/
if (nr_ext_console_drivers || cont.len + len > sizeof(cont.buf)) {
cont_flush(LOG_CONT);
return false;
}
if (!cont.len) {
cont.facility = facility;
cont.level = level;
cont.owner = current;
cont.ts_nsec = local_clock();
cont.flags = 0;
cont.cons = 0;
cont.flushed = false;
}
memcpy(cont.buf + cont.len, text, len);
cont.len += len;
if (cont.len > (sizeof(cont.buf) * 80) / 100)
cont_flush(LOG_CONT);
return true;
}
static size_t cont_print_text(char *text, size_t size)
{
size_t textlen = 0;
size_t len;
if (cont.cons == 0 && (console_prev & LOG_NEWLINE)) {
textlen += print_time(cont.ts_nsec, text);
size -= textlen;
}
len = cont.len - cont.cons;
if (len > 0) {
if (len+1 > size)
len = size-1;
memcpy(text + textlen, cont.buf + cont.cons, len);
textlen += len;
cont.cons = cont.len;
}
if (cont.flushed) {
if (cont.flags & LOG_NEWLINE)
text[textlen++] = '\n';
/* got everything, release buffer */
cont.len = 0;
}
return textlen;
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
asmlinkage int vprintk_emit(int facility, int level,
const char *dict, size_t dictlen,
const char *fmt, va_list args)
{
static bool recursion_bug;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
static char textbuf[LOG_LINE_MAX];
char *text = textbuf;
printk: remove separate printk_sched buffers and use printk buf instead To prevent deadlocks with doing a printk inside the scheduler, printk_sched() was created. The issue is that printk has a console_sem that it can grab and release. The release does a wake up if there's a task pending on the sem, and this wake up grabs the rq locks that is held in the scheduler. This leads to a possible deadlock if the wake up uses the same rq as the one with the rq lock held already. What printk_sched() does is to save the printk write in a per cpu buffer and sets the PRINTK_PENDING_SCHED flag. On a timer tick, if this flag is set, the printk() is done against the buffer. There's a couple of issues with this approach. 1) If two printk_sched()s are called before the tick, the second one will overwrite the first one. 2) The temporary buffer is 512 bytes and is per cpu. This is a quite a bit of space wasted for something that is seldom used. In order to remove this, the printk_sched() can use the printk buffer instead, and delay the console_trylock()/console_unlock() to the queued work. Because printk_sched() would then be taking the logbuf_lock, the logbuf_lock must not be held while doing anything that may call into the scheduler functions, which includes wake ups. Unfortunately, printk() also has a console_sem that it uses, and on release, the up(&console_sem) may do a wake up of any pending waiters. This must be avoided while holding the logbuf_lock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:38 +00:00
size_t text_len = 0;
enum log_flags lflags = 0;
unsigned long flags;
int this_cpu;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
int printed_len = 0;
printk: remove separate printk_sched buffers and use printk buf instead To prevent deadlocks with doing a printk inside the scheduler, printk_sched() was created. The issue is that printk has a console_sem that it can grab and release. The release does a wake up if there's a task pending on the sem, and this wake up grabs the rq locks that is held in the scheduler. This leads to a possible deadlock if the wake up uses the same rq as the one with the rq lock held already. What printk_sched() does is to save the printk write in a per cpu buffer and sets the PRINTK_PENDING_SCHED flag. On a timer tick, if this flag is set, the printk() is done against the buffer. There's a couple of issues with this approach. 1) If two printk_sched()s are called before the tick, the second one will overwrite the first one. 2) The temporary buffer is 512 bytes and is per cpu. This is a quite a bit of space wasted for something that is seldom used. In order to remove this, the printk_sched() can use the printk buffer instead, and delay the console_trylock()/console_unlock() to the queued work. Because printk_sched() would then be taking the logbuf_lock, the logbuf_lock must not be held while doing anything that may call into the scheduler functions, which includes wake ups. Unfortunately, printk() also has a console_sem that it uses, and on release, the up(&console_sem) may do a wake up of any pending waiters. This must be avoided while holding the logbuf_lock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:38 +00:00
bool in_sched = false;
/* cpu currently holding logbuf_lock in this function */
printk: drop logbuf_cpu volatile qualifier Pranith Kumar posted a patch in which removed the "volatile" qualifier for the "logbuf_cpu" variable in vprintk_emit(). https://lkml.org/lkml/2014/11/13/894 In his patch, he used ACCESS_ONCE() for all references to that symbol to provide whatever protection was intended. There was some discussion that followed, and in the end Steven Rostedt concluded that not only was "volatile" not needed, neither was it required to use ACCESS_ONCE(). I offered an elaborate description that concluded Steven was right, and Pranith asked me to submit an alternative patch. And this is it. The basic reason "volatile" is not needed is that "logbuf_cpu" has static storage duration, and vprintk_emit() is an exported interface. This means that the value of logbuf_cpu must be read from memory the first time it is used in a particular call of vprintk_emit(). The variable's value is read only once in that function, when it's read it'll be the copy from memory (or cache). In addition, the value of "logbuf_cpu" is only ever written under protection of a spinlock. So the value that is read is the "real" value (and not an out-of-date cached one). If its value is not UINT_MAX, it is the current CPU's processor id, and it will have been last written by the running CPU. Signed-off-by: Alex Elder <elder@linaro.org> Reported-by: Pranith Kumar <bobby.prani@gmail.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 23:51:21 +00:00
static unsigned int logbuf_cpu = UINT_MAX;
if (level == LOGLEVEL_SCHED) {
level = LOGLEVEL_DEFAULT;
printk: remove separate printk_sched buffers and use printk buf instead To prevent deadlocks with doing a printk inside the scheduler, printk_sched() was created. The issue is that printk has a console_sem that it can grab and release. The release does a wake up if there's a task pending on the sem, and this wake up grabs the rq locks that is held in the scheduler. This leads to a possible deadlock if the wake up uses the same rq as the one with the rq lock held already. What printk_sched() does is to save the printk write in a per cpu buffer and sets the PRINTK_PENDING_SCHED flag. On a timer tick, if this flag is set, the printk() is done against the buffer. There's a couple of issues with this approach. 1) If two printk_sched()s are called before the tick, the second one will overwrite the first one. 2) The temporary buffer is 512 bytes and is per cpu. This is a quite a bit of space wasted for something that is seldom used. In order to remove this, the printk_sched() can use the printk buffer instead, and delay the console_trylock()/console_unlock() to the queued work. Because printk_sched() would then be taking the logbuf_lock, the logbuf_lock must not be held while doing anything that may call into the scheduler functions, which includes wake ups. Unfortunately, printk() also has a console_sem that it uses, and on release, the up(&console_sem) may do a wake up of any pending waiters. This must be avoided while holding the logbuf_lock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:38 +00:00
in_sched = true;
}
boot_delay_msec(level);
printk_delay();
local_irq_save(flags);
this_cpu = smp_processor_id();
/*
* Ouch, printk recursed into itself!
*/
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (unlikely(logbuf_cpu == this_cpu)) {
/*
* If a crash is occurring during printk() on this CPU,
* then try to get the crash message out but make sure
* we can't deadlock. Otherwise just return to avoid the
* recursion and return - but flag the recursion so that
* it can be printed at the next appropriate moment:
*/
if (!oops_in_progress && !lockdep_recursing(current)) {
recursion_bug = true;
local_irq_restore(flags);
return 0;
}
zap_locks();
}
lockdep_off();
printk: move can_use_console() out of console_trylock_for_printk() console_unlock() allows to cond_resched() if its caller has set `console_may_schedule' to 1 (this functionality is present since 8d91f8b15361 ("printk: do cond_resched() between lines while outputting to consoles"). The rules are: -- console_lock() always sets `console_may_schedule' to 1 -- console_trylock() always sets `console_may_schedule' to 0 printk() calls console_unlock() with preemption desabled, which basically can lead to RCU stalls, watchdog soft lockups, etc. if something is simultaneously calling printk() frequent enough (IOW, console_sem owner always has new data to send to console divers and can't leave console_unlock() for a long time). printk()->console_trylock() callers do not necessarily execute in atomic contexts, and some of them can cond_resched() in console_unlock(). console_trylock() can set `console_may_schedule' to 1 (allow cond_resched() later in consoe_unlock()) when it's safe. This patch (of 3): vprintk_emit() disables preemption around console_trylock_for_printk() and console_unlock() calls for a strong reason -- can_use_console() check. The thing is that vprintl_emit() can be called on a CPU that is not fully brought up yet (!cpu_online()), which potentially can cause problems if console driver wants to access per-cpu data. A console driver can explicitly state that it's safe to call it from !online cpu by setting CON_ANYTIME bit in console ->flags. That's why for !cpu_online() can_use_console() iterates all the console to find out if there is a CON_ANYTIME console, otherwise console_unlock() must be avoided. can_use_console() ensures that console_unlock() call is safe in vprintk_emit() only; console_lock() and console_trylock() are not covered by this check. Even though call_console_drivers(), invoked from console_cont_flush() and console_unlock(), tests `!cpu_online() && CON_ANYTIME' for_each_console(), it may be too late, which can result in messages loss. Assume that we have 2 cpus -- CPU0 is online, CPU1 is !online, and no CON_ANYTIME consoles available. CPU0 online CPU1 !online console_trylock() ... console_unlock() console_cont_flush spin_lock logbuf_lock if (!cont.len) { spin_unlock logbuf_lock return } for (;;) { vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock spin_lock logbuf_lock !console_trylock_for_printk msg_print_text return console_idx = log_next() console_seq++ console_prev = msg->flags spin_unlock logbuf_lock call_console_drivers() for_each_console(con) { if (!cpu_online() && !(con->flags & CON_ANYTIME)) continue; } /* * no message printed, we lost it */ vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock !console_trylock_for_printk return /* * go to the beginning of the loop, * find out there are new messages, * lose it */ } console_trylock()/console_lock() call on CPU1 may come from cpu notifiers registered on that CPU. Since notifiers are not getting unregistered when CPU is going DOWN, all of the notifiers receive notifications during CPU UP. For example, on my x86_64, I see around 50 notification sent from offline CPU to itself [swapper/2] from cpu:2 to:2 action:CPU_STARTING hotplug_hrtick [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_main_cpu_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_queue_reinit_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING console_cpu_notify while doing echo 0 > /sys/devices/system/cpu/cpu2/online echo 1 > /sys/devices/system/cpu/cpu2/online So grabbing the console_sem lock while CPU is !online is possible, in theory. This patch moves can_use_console() check out of console_trylock_for_printk(). Instead it calls it in console_unlock(), so now console_lock()/console_unlock() are also 'protected' by can_use_console(). This also means that console_trylock_for_printk() is not really needed anymore and can be removed. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jan Kara <jack@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Kyle McMartin <kyle@kernel.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Calvin Owens <calvinowens@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 21:21:20 +00:00
/* This stops the holder of console_sem just where we want him */
raw_spin_lock(&logbuf_lock);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
logbuf_cpu = this_cpu;
if (unlikely(recursion_bug)) {
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
static const char recursion_msg[] =
"BUG: recent printk recursion!";
recursion_bug = false;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* emit KERN_CRIT message */
printed_len += log_store(0, 2, LOG_PREFIX|LOG_NEWLINE, 0,
NULL, 0, recursion_msg,
strlen(recursion_msg));
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/*
* The printf needs to come first; we need the syslog
* prefix which might be passed-in as a parameter.
*/
text_len = vscnprintf(text, sizeof(textbuf), fmt, args);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* mark and strip a trailing newline */
printk() - isolate KERN_CONT users from ordinary complete lines Arrange the continuation printk() buffering to be fully separated from the ordinary full line users. Limit the exposure to races and wrong printk() line merges to users of continuation only. Ordinary full line users racing against continuation users will no longer affect each other. Multiple continuation users from different threads, racing against each other will not wrongly be merged into a single line, but printed as separate lines. Test output of a kernel module which starts two separate threads which race against each other, one of them printing a single full terminated line: printk("(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA)\n"); The other one printing the line, every character separate in a continuation loop: printk("(C"); for (i = 0; i < 58; i++) printk(KERN_CONT "C"); printk(KERN_CONT "C)\n"); Behavior of single and non-thread-aware printk() buffer: # modprobe printk-race printk test init (CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) New behavior with separate and thread-aware continuation buffer: # modprobe printk-race printk test init (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 18:46:27 +00:00
if (text_len && text[text_len-1] == '\n') {
text_len--;
lflags |= LOG_NEWLINE;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
/* strip kernel syslog prefix and extract log level or control flags */
if (facility == 0) {
int kern_level = printk_get_level(text);
if (kern_level) {
const char *end_of_header = printk_skip_level(text);
switch (kern_level) {
case '0' ... '7':
if (level == LOGLEVEL_DEFAULT)
level = kern_level - '0';
/* fallthrough */
case 'd': /* KERN_DEFAULT */
lflags |= LOG_PREFIX;
}
/*
* No need to check length here because vscnprintf
* put '\0' at the end of the string. Only valid and
* newly printed level is detected.
*/
text_len -= end_of_header - text;
text = (char *)end_of_header;
}
}
if (level == LOGLEVEL_DEFAULT)
printk() - isolate KERN_CONT users from ordinary complete lines Arrange the continuation printk() buffering to be fully separated from the ordinary full line users. Limit the exposure to races and wrong printk() line merges to users of continuation only. Ordinary full line users racing against continuation users will no longer affect each other. Multiple continuation users from different threads, racing against each other will not wrongly be merged into a single line, but printed as separate lines. Test output of a kernel module which starts two separate threads which race against each other, one of them printing a single full terminated line: printk("(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA)\n"); The other one printing the line, every character separate in a continuation loop: printk("(C"); for (i = 0; i < 58; i++) printk(KERN_CONT "C"); printk(KERN_CONT "C)\n"); Behavior of single and non-thread-aware printk() buffer: # modprobe printk-race printk test init (CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) New behavior with separate and thread-aware continuation buffer: # modprobe printk-race printk test init (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 18:46:27 +00:00
level = default_message_loglevel;
if (dict)
lflags |= LOG_PREFIX|LOG_NEWLINE;
if (!(lflags & LOG_NEWLINE)) {
/*
* Flush the conflicting buffer. An earlier newline was missing,
* or another task also prints continuation lines.
*/
if (cont.len && (lflags & LOG_PREFIX || cont.owner != current))
cont_flush(LOG_NEWLINE);
printk() - isolate KERN_CONT users from ordinary complete lines Arrange the continuation printk() buffering to be fully separated from the ordinary full line users. Limit the exposure to races and wrong printk() line merges to users of continuation only. Ordinary full line users racing against continuation users will no longer affect each other. Multiple continuation users from different threads, racing against each other will not wrongly be merged into a single line, but printed as separate lines. Test output of a kernel module which starts two separate threads which race against each other, one of them printing a single full terminated line: printk("(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA)\n"); The other one printing the line, every character separate in a continuation loop: printk("(C"); for (i = 0; i < 58; i++) printk(KERN_CONT "C"); printk(KERN_CONT "C)\n"); Behavior of single and non-thread-aware printk() buffer: # modprobe printk-race printk test init (CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) New behavior with separate and thread-aware continuation buffer: # modprobe printk-race printk test init (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 18:46:27 +00:00
/* buffer line if possible, otherwise store it right away */
if (cont_add(facility, level, text, text_len))
printed_len += text_len;
else
printed_len += log_store(facility, level,
lflags | LOG_CONT, 0,
dict, dictlen, text, text_len);
} else {
bool stored = false;
printk() - isolate KERN_CONT users from ordinary complete lines Arrange the continuation printk() buffering to be fully separated from the ordinary full line users. Limit the exposure to races and wrong printk() line merges to users of continuation only. Ordinary full line users racing against continuation users will no longer affect each other. Multiple continuation users from different threads, racing against each other will not wrongly be merged into a single line, but printed as separate lines. Test output of a kernel module which starts two separate threads which race against each other, one of them printing a single full terminated line: printk("(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA)\n"); The other one printing the line, every character separate in a continuation loop: printk("(C"); for (i = 0; i < 58; i++) printk(KERN_CONT "C"); printk(KERN_CONT "C)\n"); Behavior of single and non-thread-aware printk() buffer: # modprobe printk-race printk test init (CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) New behavior with separate and thread-aware continuation buffer: # modprobe printk-race printk test init (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 18:46:27 +00:00
/*
* If an earlier newline was missing and it was the same task,
* either merge it with the current buffer and flush, or if
* there was a race with interrupts (prefix == true) then just
* flush it out and store this line separately.
* If the preceding printk was from a different task and missed
* a newline, flush and append the newline.
*/
if (cont.len) {
if (cont.owner == current && !(lflags & LOG_PREFIX))
stored = cont_add(facility, level, text,
text_len);
cont_flush(LOG_NEWLINE);
printk() - isolate KERN_CONT users from ordinary complete lines Arrange the continuation printk() buffering to be fully separated from the ordinary full line users. Limit the exposure to races and wrong printk() line merges to users of continuation only. Ordinary full line users racing against continuation users will no longer affect each other. Multiple continuation users from different threads, racing against each other will not wrongly be merged into a single line, but printed as separate lines. Test output of a kernel module which starts two separate threads which race against each other, one of them printing a single full terminated line: printk("(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA)\n"); The other one printing the line, every character separate in a continuation loop: printk("(C"); for (i = 0; i < 58; i++) printk(KERN_CONT "C"); printk(KERN_CONT "C)\n"); Behavior of single and non-thread-aware printk() buffer: # modprobe printk-race printk test init (CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CC(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) C(AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) New behavior with separate and thread-aware continuation buffer: # modprobe printk-race printk test init (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) (CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC) Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 18:46:27 +00:00
}
if (stored)
printed_len += text_len;
else
printed_len += log_store(facility, level, lflags, 0,
dict, dictlen, text, text_len);
}
logbuf_cpu = UINT_MAX;
raw_spin_unlock(&logbuf_lock);
lockdep_on();
local_irq_restore(flags);
printk: remove separate printk_sched buffers and use printk buf instead To prevent deadlocks with doing a printk inside the scheduler, printk_sched() was created. The issue is that printk has a console_sem that it can grab and release. The release does a wake up if there's a task pending on the sem, and this wake up grabs the rq locks that is held in the scheduler. This leads to a possible deadlock if the wake up uses the same rq as the one with the rq lock held already. What printk_sched() does is to save the printk write in a per cpu buffer and sets the PRINTK_PENDING_SCHED flag. On a timer tick, if this flag is set, the printk() is done against the buffer. There's a couple of issues with this approach. 1) If two printk_sched()s are called before the tick, the second one will overwrite the first one. 2) The temporary buffer is 512 bytes and is per cpu. This is a quite a bit of space wasted for something that is seldom used. In order to remove this, the printk_sched() can use the printk buffer instead, and delay the console_trylock()/console_unlock() to the queued work. Because printk_sched() would then be taking the logbuf_lock, the logbuf_lock must not be held while doing anything that may call into the scheduler functions, which includes wake ups. Unfortunately, printk() also has a console_sem that it uses, and on release, the up(&console_sem) may do a wake up of any pending waiters. This must be avoided while holding the logbuf_lock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:38 +00:00
/* If called from the scheduler, we can not call up(). */
if (!in_sched) {
lockdep_off();
/*
* Try to acquire and then immediately release the console
* semaphore. The release will print out buffers and wake up
* /dev/kmsg and syslog() users.
*/
printk: move can_use_console() out of console_trylock_for_printk() console_unlock() allows to cond_resched() if its caller has set `console_may_schedule' to 1 (this functionality is present since 8d91f8b15361 ("printk: do cond_resched() between lines while outputting to consoles"). The rules are: -- console_lock() always sets `console_may_schedule' to 1 -- console_trylock() always sets `console_may_schedule' to 0 printk() calls console_unlock() with preemption desabled, which basically can lead to RCU stalls, watchdog soft lockups, etc. if something is simultaneously calling printk() frequent enough (IOW, console_sem owner always has new data to send to console divers and can't leave console_unlock() for a long time). printk()->console_trylock() callers do not necessarily execute in atomic contexts, and some of them can cond_resched() in console_unlock(). console_trylock() can set `console_may_schedule' to 1 (allow cond_resched() later in consoe_unlock()) when it's safe. This patch (of 3): vprintk_emit() disables preemption around console_trylock_for_printk() and console_unlock() calls for a strong reason -- can_use_console() check. The thing is that vprintl_emit() can be called on a CPU that is not fully brought up yet (!cpu_online()), which potentially can cause problems if console driver wants to access per-cpu data. A console driver can explicitly state that it's safe to call it from !online cpu by setting CON_ANYTIME bit in console ->flags. That's why for !cpu_online() can_use_console() iterates all the console to find out if there is a CON_ANYTIME console, otherwise console_unlock() must be avoided. can_use_console() ensures that console_unlock() call is safe in vprintk_emit() only; console_lock() and console_trylock() are not covered by this check. Even though call_console_drivers(), invoked from console_cont_flush() and console_unlock(), tests `!cpu_online() && CON_ANYTIME' for_each_console(), it may be too late, which can result in messages loss. Assume that we have 2 cpus -- CPU0 is online, CPU1 is !online, and no CON_ANYTIME consoles available. CPU0 online CPU1 !online console_trylock() ... console_unlock() console_cont_flush spin_lock logbuf_lock if (!cont.len) { spin_unlock logbuf_lock return } for (;;) { vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock spin_lock logbuf_lock !console_trylock_for_printk msg_print_text return console_idx = log_next() console_seq++ console_prev = msg->flags spin_unlock logbuf_lock call_console_drivers() for_each_console(con) { if (!cpu_online() && !(con->flags & CON_ANYTIME)) continue; } /* * no message printed, we lost it */ vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock !console_trylock_for_printk return /* * go to the beginning of the loop, * find out there are new messages, * lose it */ } console_trylock()/console_lock() call on CPU1 may come from cpu notifiers registered on that CPU. Since notifiers are not getting unregistered when CPU is going DOWN, all of the notifiers receive notifications during CPU UP. For example, on my x86_64, I see around 50 notification sent from offline CPU to itself [swapper/2] from cpu:2 to:2 action:CPU_STARTING hotplug_hrtick [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_main_cpu_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_queue_reinit_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING console_cpu_notify while doing echo 0 > /sys/devices/system/cpu/cpu2/online echo 1 > /sys/devices/system/cpu/cpu2/online So grabbing the console_sem lock while CPU is !online is possible, in theory. This patch moves can_use_console() check out of console_trylock_for_printk(). Instead it calls it in console_unlock(), so now console_lock()/console_unlock() are also 'protected' by can_use_console(). This also means that console_trylock_for_printk() is not really needed anymore and can be removed. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jan Kara <jack@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Kyle McMartin <kyle@kernel.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Calvin Owens <calvinowens@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 21:21:20 +00:00
if (console_trylock())
console_unlock();
lockdep_on();
}
return printed_len;
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
EXPORT_SYMBOL(vprintk_emit);
asmlinkage int vprintk(const char *fmt, va_list args)
{
return vprintk_emit(0, LOGLEVEL_DEFAULT, NULL, 0, fmt, args);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
EXPORT_SYMBOL(vprintk);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
asmlinkage int printk_emit(int facility, int level,
const char *dict, size_t dictlen,
const char *fmt, ...)
{
va_list args;
int r;
va_start(args, fmt);
r = vprintk_emit(facility, level, dict, dictlen, fmt, args);
va_end(args);
return r;
}
EXPORT_SYMBOL(printk_emit);
int vprintk_default(const char *fmt, va_list args)
{
int r;
#ifdef CONFIG_KGDB_KDB
if (unlikely(kdb_trap_printk)) {
r = vkdb_printf(KDB_MSGSRC_PRINTK, fmt, args);
return r;
}
#endif
This code is a fork from the trace-3.19 pull as it needed the trace_seq clean ups from that branch. This code solves the issue of performing stack dumps from NMI context. The issue is that printk() is not safe from NMI context as if the NMI were to trigger when a printk() was being performed, the NMI could deadlock from the printk() internal locks. This has been seen in practice. With lots of review from Petr Mladek, this code went through several iterations, and we feel that it is now at a point of quality to be accepted into mainline. Here's what is contained in this patch set: o Creates a "seq_buf" generic buffer utility that allows a descriptor to be passed around where functions can write their own "printk()" formatted strings into it. The generic version was pulled out of the trace_seq() code that was made specifically for tracing. o The seq_buf code was change to model the seq_file code. I have a patch (not included for 3.19) that converts the seq_file.c code over to use seq_buf.c like the trace_seq.c code does. This was done to make sure that seq_buf.c is compatible with seq_file.c. I may try to get that patch in for 3.20. o The seq_buf.c file was moved to lib/ to remove it from being dependent on CONFIG_TRACING. o The printk() was updated to allow for a per_cpu "override" of the internal calls. That is, instead of writing to the console, a call to printk() may do something else. This made it easier to allow the NMI to change what printk() does in order to call dump_stack() without needing to update that code as well. o Finally, the dump_stack from all CPUs via NMI code was converted to use the seq_buf code. The caller to trigger the NMI code would wait till all the NMIs finished, and then it would print the seq_buf data to the console safely from a non NMI context. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJUhbrnAAoJEEjnJuOKh9ldsCoIAJ3sKIJ5B3jxJJTCHPAx/lZD GVbV1J1mu4kTAZuhJZOAxW8D6PZGZMyEjg0y6ScDEnBGcjAZ9gTiWCdakPktf9EX GfaPPqwiL9dZ18J9Qc6uR+7M1Ffpzzwbcc6lJrpoTcjRgkoH9wCiLS9ozFQyYzWb /7m5UbUM/PIk9WAjLYXPW6UUVtPTPT0RdEQKofMGTeah+vgqj4TXCOROdlxsXXWF 77vqBvPd5TUPWFH9ftzJGDtZS8SroXVKCu3fZIqHgzAU0yqwVtH/JzDTy9u2UYhX GzDEPeAIdp6m6Uyc406VuIf1QW0gfBgmA0ir80vFoP27uFMM6j5HlF7azgQfx34= =YBgA -----END PGP SIGNATURE----- Merge tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull nmi-safe seq_buf printk update from Steven Rostedt: "This code is a fork from the trace-3.19 pull as it needed the trace_seq clean ups from that branch. This code solves the issue of performing stack dumps from NMI context. The issue is that printk() is not safe from NMI context as if the NMI were to trigger when a printk() was being performed, the NMI could deadlock from the printk() internal locks. This has been seen in practice. With lots of review from Petr Mladek, this code went through several iterations, and we feel that it is now at a point of quality to be accepted into mainline. Here's what is contained in this patch set: - Creates a "seq_buf" generic buffer utility that allows a descriptor to be passed around where functions can write their own "printk()" formatted strings into it. The generic version was pulled out of the trace_seq() code that was made specifically for tracing. - The seq_buf code was change to model the seq_file code. I have a patch (not included for 3.19) that converts the seq_file.c code over to use seq_buf.c like the trace_seq.c code does. This was done to make sure that seq_buf.c is compatible with seq_file.c. I may try to get that patch in for 3.20. - The seq_buf.c file was moved to lib/ to remove it from being dependent on CONFIG_TRACING. - The printk() was updated to allow for a per_cpu "override" of the internal calls. That is, instead of writing to the console, a call to printk() may do something else. This made it easier to allow the NMI to change what printk() does in order to call dump_stack() without needing to update that code as well. - Finally, the dump_stack from all CPUs via NMI code was converted to use the seq_buf code. The caller to trigger the NMI code would wait till all the NMIs finished, and then it would print the seq_buf data to the console safely from a non NMI context One added bonus is that this code also makes the NMI dump stack work on PREEMPT_RT kernels. As printk() includes sleeping locks on PREEMPT_RT, printk() only writes to console if the console does not use any rt_mutex converted spin locks. Which a lot do" * tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/nmi: Fix use of unallocated cpumask_var_t printk/percpu: Define printk_func when printk is not defined x86/nmi: Perform a safe NMI stack trace on all CPUs printk: Add per_cpu printk func to allow printk to be diverted seq_buf: Move the seq_buf code to lib/ seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions tracing: Have seq_buf use full buffer seq_buf: Add seq_buf_can_fit() helper function tracing: Add paranoid size check in trace_printk_seq() tracing: Use trace_seq_used() and seq_buf_used() instead of len tracing: Clean up tracing_fill_pipe_page() seq_buf: Create seq_buf_used() to find out how much was written tracing: Add a seq_buf_clear() helper and clear len and readpos in init tracing: Convert seq_buf fields to be like seq_file fields tracing: Convert seq_buf_path() to be like seq_path() tracing: Create seq_buf layer in trace_seq
2014-12-11 04:35:41 +00:00
r = vprintk_emit(0, LOGLEVEL_DEFAULT, NULL, 0, fmt, args);
return r;
}
EXPORT_SYMBOL_GPL(vprintk_default);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/**
* printk - print a kernel message
* @fmt: format string
*
* This is printk(). It can be called from any context. We want it to work.
*
* We try to grab the console_lock. If we succeed, it's easy - we log the
* output and call the console drivers. If we fail to get the semaphore, we
* place the output into the log buffer and return. The current holder of
* the console_sem will notice the new output in console_unlock(); and will
* send it to the consoles before releasing the lock.
*
* One effect of this deferred printing is that code which calls printk() and
* then changes console_loglevel may break. This is because console_loglevel
* is inspected when the actual printing occurs.
*
* See also:
* printf(3)
*
* See the vsnprintf() documentation for format string extensions over C99.
*/
asmlinkage __visible int printk(const char *fmt, ...)
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
{
va_list args;
int r;
va_start(args, fmt);
r = vprintk_func(fmt, args);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
va_end(args);
return r;
}
EXPORT_SYMBOL(printk);
#else /* CONFIG_PRINTK */
#define LOG_LINE_MAX 0
#define PREFIX_MAX 0
static u64 syslog_seq;
static u32 syslog_idx;
static u64 console_seq;
static u32 console_idx;
static enum log_flags syslog_prev;
static u64 log_first_seq;
static u32 log_first_idx;
static u64 log_next_seq;
static enum log_flags console_prev;
static struct cont {
size_t len;
size_t cons;
u8 level;
bool flushed:1;
} cont;
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
static char *log_text(const struct printk_log *msg) { return NULL; }
static char *log_dict(const struct printk_log *msg) { return NULL; }
static struct printk_log *log_from_idx(u32 idx) { return NULL; }
static u32 log_next(u32 idx) { return 0; }
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
static ssize_t msg_print_ext_header(char *buf, size_t size,
struct printk_log *msg, u64 seq,
enum log_flags prev_flags) { return 0; }
static ssize_t msg_print_ext_body(char *buf, size_t size,
char *dict, size_t dict_len,
char *text, size_t text_len) { return 0; }
static void call_console_drivers(int level,
const char *ext_text, size_t ext_len,
const char *text, size_t len) {}
static size_t msg_print_text(const struct printk_log *msg, enum log_flags prev,
bool syslog, char *buf, size_t size) { return 0; }
static size_t cont_print_text(char *text, size_t size) { return 0; }
/* Still needs to be defined for users */
DEFINE_PER_CPU(printk_func_t, printk_func);
#endif /* CONFIG_PRINTK */
#ifdef CONFIG_EARLY_PRINTK
struct console *early_console;
asmlinkage __visible void early_printk(const char *fmt, ...)
{
va_list ap;
char buf[512];
int n;
if (!early_console)
return;
va_start(ap, fmt);
n = vscnprintf(buf, sizeof(buf), fmt, ap);
va_end(ap);
early_console->write(early_console, buf, n);
}
#endif
static int __add_preferred_console(char *name, int idx, char *options,
char *brl_options)
{
struct console_cmdline *c;
int i;
/*
* See if this tty is not yet registered, and
* if we have a slot free.
*/
for (i = 0, c = console_cmdline;
i < MAX_CMDLINECONSOLES && c->name[0];
i++, c++) {
if (strcmp(c->name, name) == 0 && c->index == idx) {
if (!brl_options)
selected_console = i;
return 0;
}
}
if (i == MAX_CMDLINECONSOLES)
return -E2BIG;
if (!brl_options)
selected_console = i;
strlcpy(c->name, name, sizeof(c->name));
c->options = options;
braille_set_options(c, brl_options);
c->index = idx;
return 0;
}
/*
* Set up a console. Called via do_early_param() in init/main.c
* for each "console=" parameter in the boot command line.
*/
static int __init console_setup(char *str)
{
char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for "ttyS" */
char *s, *options, *brl_options = NULL;
int idx;
if (_braille_console_setup(&str, &brl_options))
return 1;
/*
* Decode str into name, index, options.
*/
if (str[0] >= '0' && str[0] <= '9') {
strcpy(buf, "ttyS");
strncpy(buf + 4, str, sizeof(buf) - 5);
} else {
strncpy(buf, str, sizeof(buf) - 1);
}
buf[sizeof(buf) - 1] = 0;
options = strchr(str, ',');
if (options)
*(options++) = 0;
#ifdef __sparc__
if (!strcmp(str, "ttya"))
strcpy(buf, "ttyS0");
if (!strcmp(str, "ttyb"))
strcpy(buf, "ttyS1");
#endif
for (s = buf; *s; s++)
if (isdigit(*s) || *s == ',')
break;
idx = simple_strtoul(s, NULL, 10);
*s = 0;
__add_preferred_console(buf, idx, options, brl_options);
console_set_on_cmdline = 1;
return 1;
}
__setup("console=", console_setup);
/**
* add_preferred_console - add a device to the list of preferred consoles.
* @name: device name
* @idx: device index
* @options: options for this console
*
* The last preferred console added will be used for kernel messages
* and stdin/out/err for init. Normally this is used by console_setup
* above to handle user-supplied console arguments; however it can also
* be used by arch-specific code either to override the user or more
* commonly to provide a default console (ie from PROM variables) when
* the user has not supplied one.
*/
int add_preferred_console(char *name, int idx, char *options)
{
return __add_preferred_console(name, idx, options, NULL);
}
bool console_suspend_enabled = true;
EXPORT_SYMBOL(console_suspend_enabled);
static int __init console_suspend_disable(char *str)
{
console_suspend_enabled = false;
return 1;
}
__setup("no_console_suspend", console_suspend_disable);
module_param_named(console_suspend, console_suspend_enabled,
bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(console_suspend, "suspend console during suspend"
" and hibernate operations");
/**
* suspend_console - suspend the console subsystem
*
* This disables printk() while we go into suspend states
*/
void suspend_console(void)
{
if (!console_suspend_enabled)
return;
printk("Suspending console(s) (use no_console_suspend to debug)\n");
console_lock();
console_suspended = 1;
up_console_sem();
}
void resume_console(void)
{
if (!console_suspend_enabled)
return;
down_console_sem();
console_suspended = 0;
console_unlock();
}
printk: fix delayed messages from CPU hotplug events When a secondary CPU is being brought up, it is not uncommon for printk() to be invoked when cpu_online(smp_processor_id()) == 0. The case that I witnessed personally was on MIPS: http://lkml.org/lkml/2010/5/30/4 If (can_use_console() == 0), printk() will spool its output to log_buf and it will be visible in "dmesg", but that output will NOT be echoed to the console until somebody calls release_console_sem() from a CPU that is online. Therefore, the boot time messages from the new CPU can get stuck in "limbo" for a long time, and might suddenly appear on the screen when a completely unrelated event (e.g. "eth0: link is down") occurs. This patch modifies the console code so that any pending messages are automatically flushed out to the console whenever a CPU hotplug operation completes successfully or aborts. The issue was seen on 2.6.34. Original patch by Kevin Cernekee with cleanups by akpm and additional fixes by Santosh Shilimkar. This patch superseeds https://patchwork.linux-mips.org/patch/1357/. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> To: <mingo@elte.hu> To: <akpm@linux-foundation.org> To: <simon.kagstrom@netinsight.net> To: <David.Woodhouse@intel.com> To: <lethal@linux-sh.org> Cc: <linux-kernel@vger.kernel.org> Cc: <linux-mips@linux-mips.org> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1534/ LKML-Reference: <ede63b5a20af951c755736f035d1e787772d7c28@localhost> LKML-Reference: <EAF47CD23C76F840A9E7FCE10091EFAB02C5DB6D1F@dbde02.ent.ti.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-06-04 05:11:25 +00:00
/**
* console_cpu_notify - print deferred console messages after CPU hotplug
* @self: notifier struct
* @action: CPU hotplug event
* @hcpu: unused
*
* If printk() is called from a CPU that is not online yet, the messages
* will be spooled but will not show up on the console. This function is
* called when a new CPU comes online (or fails to come up), and ensures
* that any such output gets printed.
*/
static int console_cpu_notify(struct notifier_block *self,
printk: fix delayed messages from CPU hotplug events When a secondary CPU is being brought up, it is not uncommon for printk() to be invoked when cpu_online(smp_processor_id()) == 0. The case that I witnessed personally was on MIPS: http://lkml.org/lkml/2010/5/30/4 If (can_use_console() == 0), printk() will spool its output to log_buf and it will be visible in "dmesg", but that output will NOT be echoed to the console until somebody calls release_console_sem() from a CPU that is online. Therefore, the boot time messages from the new CPU can get stuck in "limbo" for a long time, and might suddenly appear on the screen when a completely unrelated event (e.g. "eth0: link is down") occurs. This patch modifies the console code so that any pending messages are automatically flushed out to the console whenever a CPU hotplug operation completes successfully or aborts. The issue was seen on 2.6.34. Original patch by Kevin Cernekee with cleanups by akpm and additional fixes by Santosh Shilimkar. This patch superseeds https://patchwork.linux-mips.org/patch/1357/. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> To: <mingo@elte.hu> To: <akpm@linux-foundation.org> To: <simon.kagstrom@netinsight.net> To: <David.Woodhouse@intel.com> To: <lethal@linux-sh.org> Cc: <linux-kernel@vger.kernel.org> Cc: <linux-mips@linux-mips.org> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1534/ LKML-Reference: <ede63b5a20af951c755736f035d1e787772d7c28@localhost> LKML-Reference: <EAF47CD23C76F840A9E7FCE10091EFAB02C5DB6D1F@dbde02.ent.ti.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-06-04 05:11:25 +00:00
unsigned long action, void *hcpu)
{
switch (action) {
case CPU_ONLINE:
case CPU_DEAD:
case CPU_DOWN_FAILED:
case CPU_UP_CANCELED:
console_lock();
console_unlock();
printk: fix delayed messages from CPU hotplug events When a secondary CPU is being brought up, it is not uncommon for printk() to be invoked when cpu_online(smp_processor_id()) == 0. The case that I witnessed personally was on MIPS: http://lkml.org/lkml/2010/5/30/4 If (can_use_console() == 0), printk() will spool its output to log_buf and it will be visible in "dmesg", but that output will NOT be echoed to the console until somebody calls release_console_sem() from a CPU that is online. Therefore, the boot time messages from the new CPU can get stuck in "limbo" for a long time, and might suddenly appear on the screen when a completely unrelated event (e.g. "eth0: link is down") occurs. This patch modifies the console code so that any pending messages are automatically flushed out to the console whenever a CPU hotplug operation completes successfully or aborts. The issue was seen on 2.6.34. Original patch by Kevin Cernekee with cleanups by akpm and additional fixes by Santosh Shilimkar. This patch superseeds https://patchwork.linux-mips.org/patch/1357/. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> To: <mingo@elte.hu> To: <akpm@linux-foundation.org> To: <simon.kagstrom@netinsight.net> To: <David.Woodhouse@intel.com> To: <lethal@linux-sh.org> Cc: <linux-kernel@vger.kernel.org> Cc: <linux-mips@linux-mips.org> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1534/ LKML-Reference: <ede63b5a20af951c755736f035d1e787772d7c28@localhost> LKML-Reference: <EAF47CD23C76F840A9E7FCE10091EFAB02C5DB6D1F@dbde02.ent.ti.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-06-04 05:11:25 +00:00
}
return NOTIFY_OK;
}
/**
* console_lock - lock the console system for exclusive use.
*
* Acquires a lock which guarantees that the caller has
* exclusive access to the console system and the console_drivers list.
*
* Can sleep, returns nothing.
*/
void console_lock(void)
{
might_sleep();
down_console_sem();
if (console_suspended)
return;
console_locked = 1;
console_may_schedule = 1;
}
EXPORT_SYMBOL(console_lock);
/**
* console_trylock - try to lock the console system for exclusive use.
*
* Try to acquire a lock which guarantees that the caller has exclusive
* access to the console system and the console_drivers list.
*
* returns 1 on success, and 0 on failure to acquire the lock.
*/
int console_trylock(void)
{
if (down_trylock_console_sem())
return 0;
if (console_suspended) {
up_console_sem();
return 0;
}
console_locked = 1;
/*
* When PREEMPT_COUNT disabled we can't reliably detect if it's
* safe to schedule (e.g. calling printk while holding a spin_lock),
* because preempt_disable()/preempt_enable() are just barriers there
* and preempt_count() is always 0.
*
* RCU read sections have a separate preemption counter when
* PREEMPT_RCU enabled thus we must take extra care and check
* rcu_preempt_depth(), otherwise RCU read sections modify
* preempt_count().
*/
console_may_schedule = !oops_in_progress &&
preemptible() &&
!rcu_preempt_depth();
return 1;
}
EXPORT_SYMBOL(console_trylock);
int is_console_locked(void)
{
return console_locked;
}
printk: move can_use_console() out of console_trylock_for_printk() console_unlock() allows to cond_resched() if its caller has set `console_may_schedule' to 1 (this functionality is present since 8d91f8b15361 ("printk: do cond_resched() between lines while outputting to consoles"). The rules are: -- console_lock() always sets `console_may_schedule' to 1 -- console_trylock() always sets `console_may_schedule' to 0 printk() calls console_unlock() with preemption desabled, which basically can lead to RCU stalls, watchdog soft lockups, etc. if something is simultaneously calling printk() frequent enough (IOW, console_sem owner always has new data to send to console divers and can't leave console_unlock() for a long time). printk()->console_trylock() callers do not necessarily execute in atomic contexts, and some of them can cond_resched() in console_unlock(). console_trylock() can set `console_may_schedule' to 1 (allow cond_resched() later in consoe_unlock()) when it's safe. This patch (of 3): vprintk_emit() disables preemption around console_trylock_for_printk() and console_unlock() calls for a strong reason -- can_use_console() check. The thing is that vprintl_emit() can be called on a CPU that is not fully brought up yet (!cpu_online()), which potentially can cause problems if console driver wants to access per-cpu data. A console driver can explicitly state that it's safe to call it from !online cpu by setting CON_ANYTIME bit in console ->flags. That's why for !cpu_online() can_use_console() iterates all the console to find out if there is a CON_ANYTIME console, otherwise console_unlock() must be avoided. can_use_console() ensures that console_unlock() call is safe in vprintk_emit() only; console_lock() and console_trylock() are not covered by this check. Even though call_console_drivers(), invoked from console_cont_flush() and console_unlock(), tests `!cpu_online() && CON_ANYTIME' for_each_console(), it may be too late, which can result in messages loss. Assume that we have 2 cpus -- CPU0 is online, CPU1 is !online, and no CON_ANYTIME consoles available. CPU0 online CPU1 !online console_trylock() ... console_unlock() console_cont_flush spin_lock logbuf_lock if (!cont.len) { spin_unlock logbuf_lock return } for (;;) { vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock spin_lock logbuf_lock !console_trylock_for_printk msg_print_text return console_idx = log_next() console_seq++ console_prev = msg->flags spin_unlock logbuf_lock call_console_drivers() for_each_console(con) { if (!cpu_online() && !(con->flags & CON_ANYTIME)) continue; } /* * no message printed, we lost it */ vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock !console_trylock_for_printk return /* * go to the beginning of the loop, * find out there are new messages, * lose it */ } console_trylock()/console_lock() call on CPU1 may come from cpu notifiers registered on that CPU. Since notifiers are not getting unregistered when CPU is going DOWN, all of the notifiers receive notifications during CPU UP. For example, on my x86_64, I see around 50 notification sent from offline CPU to itself [swapper/2] from cpu:2 to:2 action:CPU_STARTING hotplug_hrtick [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_main_cpu_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_queue_reinit_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING console_cpu_notify while doing echo 0 > /sys/devices/system/cpu/cpu2/online echo 1 > /sys/devices/system/cpu/cpu2/online So grabbing the console_sem lock while CPU is !online is possible, in theory. This patch moves can_use_console() check out of console_trylock_for_printk(). Instead it calls it in console_unlock(), so now console_lock()/console_unlock() are also 'protected' by can_use_console(). This also means that console_trylock_for_printk() is not really needed anymore and can be removed. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jan Kara <jack@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Kyle McMartin <kyle@kernel.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Calvin Owens <calvinowens@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 21:21:20 +00:00
/*
* Check if we have any console that is capable of printing while cpu is
* booting or shutting down. Requires console_sem.
*/
static int have_callable_console(void)
{
struct console *con;
for_each_console(con)
if ((con->flags & CON_ENABLED) &&
(con->flags & CON_ANYTIME))
printk: move can_use_console() out of console_trylock_for_printk() console_unlock() allows to cond_resched() if its caller has set `console_may_schedule' to 1 (this functionality is present since 8d91f8b15361 ("printk: do cond_resched() between lines while outputting to consoles"). The rules are: -- console_lock() always sets `console_may_schedule' to 1 -- console_trylock() always sets `console_may_schedule' to 0 printk() calls console_unlock() with preemption desabled, which basically can lead to RCU stalls, watchdog soft lockups, etc. if something is simultaneously calling printk() frequent enough (IOW, console_sem owner always has new data to send to console divers and can't leave console_unlock() for a long time). printk()->console_trylock() callers do not necessarily execute in atomic contexts, and some of them can cond_resched() in console_unlock(). console_trylock() can set `console_may_schedule' to 1 (allow cond_resched() later in consoe_unlock()) when it's safe. This patch (of 3): vprintk_emit() disables preemption around console_trylock_for_printk() and console_unlock() calls for a strong reason -- can_use_console() check. The thing is that vprintl_emit() can be called on a CPU that is not fully brought up yet (!cpu_online()), which potentially can cause problems if console driver wants to access per-cpu data. A console driver can explicitly state that it's safe to call it from !online cpu by setting CON_ANYTIME bit in console ->flags. That's why for !cpu_online() can_use_console() iterates all the console to find out if there is a CON_ANYTIME console, otherwise console_unlock() must be avoided. can_use_console() ensures that console_unlock() call is safe in vprintk_emit() only; console_lock() and console_trylock() are not covered by this check. Even though call_console_drivers(), invoked from console_cont_flush() and console_unlock(), tests `!cpu_online() && CON_ANYTIME' for_each_console(), it may be too late, which can result in messages loss. Assume that we have 2 cpus -- CPU0 is online, CPU1 is !online, and no CON_ANYTIME consoles available. CPU0 online CPU1 !online console_trylock() ... console_unlock() console_cont_flush spin_lock logbuf_lock if (!cont.len) { spin_unlock logbuf_lock return } for (;;) { vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock spin_lock logbuf_lock !console_trylock_for_printk msg_print_text return console_idx = log_next() console_seq++ console_prev = msg->flags spin_unlock logbuf_lock call_console_drivers() for_each_console(con) { if (!cpu_online() && !(con->flags & CON_ANYTIME)) continue; } /* * no message printed, we lost it */ vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock !console_trylock_for_printk return /* * go to the beginning of the loop, * find out there are new messages, * lose it */ } console_trylock()/console_lock() call on CPU1 may come from cpu notifiers registered on that CPU. Since notifiers are not getting unregistered when CPU is going DOWN, all of the notifiers receive notifications during CPU UP. For example, on my x86_64, I see around 50 notification sent from offline CPU to itself [swapper/2] from cpu:2 to:2 action:CPU_STARTING hotplug_hrtick [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_main_cpu_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_queue_reinit_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING console_cpu_notify while doing echo 0 > /sys/devices/system/cpu/cpu2/online echo 1 > /sys/devices/system/cpu/cpu2/online So grabbing the console_sem lock while CPU is !online is possible, in theory. This patch moves can_use_console() check out of console_trylock_for_printk(). Instead it calls it in console_unlock(), so now console_lock()/console_unlock() are also 'protected' by can_use_console(). This also means that console_trylock_for_printk() is not really needed anymore and can be removed. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jan Kara <jack@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Kyle McMartin <kyle@kernel.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Calvin Owens <calvinowens@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 21:21:20 +00:00
return 1;
return 0;
}
/*
* Can we actually use the console at this time on this cpu?
*
* Console drivers may assume that per-cpu resources have been allocated. So
* unless they're explicitly marked as being able to cope (CON_ANYTIME) don't
* call them until this CPU is officially up.
*/
static inline int can_use_console(void)
{
return cpu_online(raw_smp_processor_id()) || have_callable_console();
}
static void console_cont_flush(char *text, size_t size)
{
unsigned long flags;
size_t len;
raw_spin_lock_irqsave(&logbuf_lock, flags);
if (!cont.len)
goto out;
/*
* We still queue earlier records, likely because the console was
* busy. The earlier ones need to be printed before this one, we
* did not flush any fragment so far, so just let it queue up.
*/
if (console_seq < log_next_seq && !cont.cons)
goto out;
len = cont_print_text(text, size);
raw_spin_unlock(&logbuf_lock);
stop_critical_timings();
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
call_console_drivers(cont.level, NULL, 0, text, len);
start_critical_timings();
local_irq_restore(flags);
return;
out:
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/**
* console_unlock - unlock the console system
*
* Releases the console_lock which the caller holds on the console system
* and the console driver list.
*
* While the console_lock was held, console output may have been buffered
* by printk(). If this is the case, console_unlock(); emits
* the output prior to releasing the lock.
*
* If there is output waiting, we wake /dev/kmsg and syslog() users.
*
* console_unlock(); may be called from any context.
*/
void console_unlock(void)
{
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
static char ext_text[CONSOLE_EXT_LOG_MAX];
static char text[LOG_LINE_MAX + PREFIX_MAX];
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
static u64 seen_seq;
unsigned long flags;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
bool wake_klogd = false;
printk: do cond_resched() between lines while outputting to consoles @console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Calvin Owens <calvinowens@fb.com> Acked-by: Jan Kara <jack@suse.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Kyle McMartin <kyle@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:58:24 +00:00
bool do_cond_resched, retry;
if (console_suspended) {
up_console_sem();
return;
}
[PATCH] vt: printk: Fix framebuffer console triggering might_sleep assertion Reported by: Dave Jones Whilst printk'ing to both console and serial console, I got this... (2.6.18rc1) BUG: sleeping function called from invalid context at kernel/sched.c:4438 in_atomic():0, irqs_disabled():1 Call Trace: [<ffffffff80271db8>] show_trace+0xaa/0x23d [<ffffffff80271f60>] dump_stack+0x15/0x17 [<ffffffff8020b9f8>] __might_sleep+0xb2/0xb4 [<ffffffff8029232e>] __cond_resched+0x15/0x55 [<ffffffff80267eb8>] cond_resched+0x3b/0x42 [<ffffffff80268c64>] console_conditional_schedule+0x12/0x14 [<ffffffff80368159>] fbcon_redraw+0xf6/0x160 [<ffffffff80369c58>] fbcon_scroll+0x5d9/0xb52 [<ffffffff803a43c4>] scrup+0x6b/0xd6 [<ffffffff803a4453>] lf+0x24/0x44 [<ffffffff803a7ff8>] vt_console_print+0x166/0x23d [<ffffffff80295528>] __call_console_drivers+0x65/0x76 [<ffffffff80295597>] _call_console_drivers+0x5e/0x62 [<ffffffff80217e3f>] release_console_sem+0x14b/0x232 [<ffffffff8036acd6>] fb_flashcursor+0x279/0x2a6 [<ffffffff80251e3f>] run_workqueue+0xa8/0xfb [<ffffffff8024e5e0>] worker_thread+0xef/0x122 [<ffffffff8023660f>] kthread+0x100/0x136 [<ffffffff8026419e>] child_rip+0x8/0x12 This can occur when release_console_sem() is called but the log buffer still has contents that need to be flushed. The console drivers are called while the console_may_schedule flag is still true. The might_sleep() is triggered when fbcon calls console_conditional_schedule(). Fix by setting console_may_schedule to zero earlier, before the call to the console drivers. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-05 19:14:16 +00:00
printk: do cond_resched() between lines while outputting to consoles @console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Calvin Owens <calvinowens@fb.com> Acked-by: Jan Kara <jack@suse.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Kyle McMartin <kyle@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:58:24 +00:00
/*
* Console drivers are called under logbuf_lock, so
* @console_may_schedule should be cleared before; however, we may
* end up dumping a lot of lines, for example, if called from
* console registration path, and should invoke cond_resched()
* between lines if allowable. Not doing so can cause a very long
* scheduling stall on a slow console leading to RCU stall and
* softlockup warnings which exacerbate the issue with more
* messages practically incapacitating the system.
*/
do_cond_resched = console_may_schedule;
[PATCH] vt: printk: Fix framebuffer console triggering might_sleep assertion Reported by: Dave Jones Whilst printk'ing to both console and serial console, I got this... (2.6.18rc1) BUG: sleeping function called from invalid context at kernel/sched.c:4438 in_atomic():0, irqs_disabled():1 Call Trace: [<ffffffff80271db8>] show_trace+0xaa/0x23d [<ffffffff80271f60>] dump_stack+0x15/0x17 [<ffffffff8020b9f8>] __might_sleep+0xb2/0xb4 [<ffffffff8029232e>] __cond_resched+0x15/0x55 [<ffffffff80267eb8>] cond_resched+0x3b/0x42 [<ffffffff80268c64>] console_conditional_schedule+0x12/0x14 [<ffffffff80368159>] fbcon_redraw+0xf6/0x160 [<ffffffff80369c58>] fbcon_scroll+0x5d9/0xb52 [<ffffffff803a43c4>] scrup+0x6b/0xd6 [<ffffffff803a4453>] lf+0x24/0x44 [<ffffffff803a7ff8>] vt_console_print+0x166/0x23d [<ffffffff80295528>] __call_console_drivers+0x65/0x76 [<ffffffff80295597>] _call_console_drivers+0x5e/0x62 [<ffffffff80217e3f>] release_console_sem+0x14b/0x232 [<ffffffff8036acd6>] fb_flashcursor+0x279/0x2a6 [<ffffffff80251e3f>] run_workqueue+0xa8/0xfb [<ffffffff8024e5e0>] worker_thread+0xef/0x122 [<ffffffff8023660f>] kthread+0x100/0x136 [<ffffffff8026419e>] child_rip+0x8/0x12 This can occur when release_console_sem() is called but the log buffer still has contents that need to be flushed. The console drivers are called while the console_may_schedule flag is still true. The might_sleep() is triggered when fbcon calls console_conditional_schedule(). Fix by setting console_may_schedule to zero earlier, before the call to the console drivers. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-05 19:14:16 +00:00
console_may_schedule = 0;
printk: move can_use_console() out of console_trylock_for_printk() console_unlock() allows to cond_resched() if its caller has set `console_may_schedule' to 1 (this functionality is present since 8d91f8b15361 ("printk: do cond_resched() between lines while outputting to consoles"). The rules are: -- console_lock() always sets `console_may_schedule' to 1 -- console_trylock() always sets `console_may_schedule' to 0 printk() calls console_unlock() with preemption desabled, which basically can lead to RCU stalls, watchdog soft lockups, etc. if something is simultaneously calling printk() frequent enough (IOW, console_sem owner always has new data to send to console divers and can't leave console_unlock() for a long time). printk()->console_trylock() callers do not necessarily execute in atomic contexts, and some of them can cond_resched() in console_unlock(). console_trylock() can set `console_may_schedule' to 1 (allow cond_resched() later in consoe_unlock()) when it's safe. This patch (of 3): vprintk_emit() disables preemption around console_trylock_for_printk() and console_unlock() calls for a strong reason -- can_use_console() check. The thing is that vprintl_emit() can be called on a CPU that is not fully brought up yet (!cpu_online()), which potentially can cause problems if console driver wants to access per-cpu data. A console driver can explicitly state that it's safe to call it from !online cpu by setting CON_ANYTIME bit in console ->flags. That's why for !cpu_online() can_use_console() iterates all the console to find out if there is a CON_ANYTIME console, otherwise console_unlock() must be avoided. can_use_console() ensures that console_unlock() call is safe in vprintk_emit() only; console_lock() and console_trylock() are not covered by this check. Even though call_console_drivers(), invoked from console_cont_flush() and console_unlock(), tests `!cpu_online() && CON_ANYTIME' for_each_console(), it may be too late, which can result in messages loss. Assume that we have 2 cpus -- CPU0 is online, CPU1 is !online, and no CON_ANYTIME consoles available. CPU0 online CPU1 !online console_trylock() ... console_unlock() console_cont_flush spin_lock logbuf_lock if (!cont.len) { spin_unlock logbuf_lock return } for (;;) { vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock spin_lock logbuf_lock !console_trylock_for_printk msg_print_text return console_idx = log_next() console_seq++ console_prev = msg->flags spin_unlock logbuf_lock call_console_drivers() for_each_console(con) { if (!cpu_online() && !(con->flags & CON_ANYTIME)) continue; } /* * no message printed, we lost it */ vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock !console_trylock_for_printk return /* * go to the beginning of the loop, * find out there are new messages, * lose it */ } console_trylock()/console_lock() call on CPU1 may come from cpu notifiers registered on that CPU. Since notifiers are not getting unregistered when CPU is going DOWN, all of the notifiers receive notifications during CPU UP. For example, on my x86_64, I see around 50 notification sent from offline CPU to itself [swapper/2] from cpu:2 to:2 action:CPU_STARTING hotplug_hrtick [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_main_cpu_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_queue_reinit_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING console_cpu_notify while doing echo 0 > /sys/devices/system/cpu/cpu2/online echo 1 > /sys/devices/system/cpu/cpu2/online So grabbing the console_sem lock while CPU is !online is possible, in theory. This patch moves can_use_console() check out of console_trylock_for_printk(). Instead it calls it in console_unlock(), so now console_lock()/console_unlock() are also 'protected' by can_use_console(). This also means that console_trylock_for_printk() is not really needed anymore and can be removed. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jan Kara <jack@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Kyle McMartin <kyle@kernel.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Calvin Owens <calvinowens@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 21:21:20 +00:00
again:
/*
* We released the console_sem lock, so we need to recheck if
* cpu is online and (if not) is there at least one CON_ANYTIME
* console.
*/
if (!can_use_console()) {
console_locked = 0;
up_console_sem();
return;
}
/* flush buffered message fragment immediately to console */
console_cont_flush(text, sizeof(text));
printk: move can_use_console() out of console_trylock_for_printk() console_unlock() allows to cond_resched() if its caller has set `console_may_schedule' to 1 (this functionality is present since 8d91f8b15361 ("printk: do cond_resched() between lines while outputting to consoles"). The rules are: -- console_lock() always sets `console_may_schedule' to 1 -- console_trylock() always sets `console_may_schedule' to 0 printk() calls console_unlock() with preemption desabled, which basically can lead to RCU stalls, watchdog soft lockups, etc. if something is simultaneously calling printk() frequent enough (IOW, console_sem owner always has new data to send to console divers and can't leave console_unlock() for a long time). printk()->console_trylock() callers do not necessarily execute in atomic contexts, and some of them can cond_resched() in console_unlock(). console_trylock() can set `console_may_schedule' to 1 (allow cond_resched() later in consoe_unlock()) when it's safe. This patch (of 3): vprintk_emit() disables preemption around console_trylock_for_printk() and console_unlock() calls for a strong reason -- can_use_console() check. The thing is that vprintl_emit() can be called on a CPU that is not fully brought up yet (!cpu_online()), which potentially can cause problems if console driver wants to access per-cpu data. A console driver can explicitly state that it's safe to call it from !online cpu by setting CON_ANYTIME bit in console ->flags. That's why for !cpu_online() can_use_console() iterates all the console to find out if there is a CON_ANYTIME console, otherwise console_unlock() must be avoided. can_use_console() ensures that console_unlock() call is safe in vprintk_emit() only; console_lock() and console_trylock() are not covered by this check. Even though call_console_drivers(), invoked from console_cont_flush() and console_unlock(), tests `!cpu_online() && CON_ANYTIME' for_each_console(), it may be too late, which can result in messages loss. Assume that we have 2 cpus -- CPU0 is online, CPU1 is !online, and no CON_ANYTIME consoles available. CPU0 online CPU1 !online console_trylock() ... console_unlock() console_cont_flush spin_lock logbuf_lock if (!cont.len) { spin_unlock logbuf_lock return } for (;;) { vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock spin_lock logbuf_lock !console_trylock_for_printk msg_print_text return console_idx = log_next() console_seq++ console_prev = msg->flags spin_unlock logbuf_lock call_console_drivers() for_each_console(con) { if (!cpu_online() && !(con->flags & CON_ANYTIME)) continue; } /* * no message printed, we lost it */ vprintk_emit spin_lock logbuf_lock log_store spin_unlock logbuf_lock !console_trylock_for_printk return /* * go to the beginning of the loop, * find out there are new messages, * lose it */ } console_trylock()/console_lock() call on CPU1 may come from cpu notifiers registered on that CPU. Since notifiers are not getting unregistered when CPU is going DOWN, all of the notifiers receive notifications during CPU UP. For example, on my x86_64, I see around 50 notification sent from offline CPU to itself [swapper/2] from cpu:2 to:2 action:CPU_STARTING hotplug_hrtick [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_main_cpu_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_queue_reinit_notify [swapper/2] from cpu:2 to:2 action:CPU_STARTING console_cpu_notify while doing echo 0 > /sys/devices/system/cpu/cpu2/online echo 1 > /sys/devices/system/cpu/cpu2/online So grabbing the console_sem lock while CPU is !online is possible, in theory. This patch moves can_use_console() check out of console_trylock_for_printk(). Instead it calls it in console_unlock(), so now console_lock()/console_unlock() are also 'protected' by can_use_console(). This also means that console_trylock_for_printk() is not really needed anymore and can be removed. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jan Kara <jack@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Kyle McMartin <kyle@kernel.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Calvin Owens <calvinowens@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 21:21:20 +00:00
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
for (;;) {
struct printk_log *msg;
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
size_t ext_len = 0;
size_t len;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
int level;
raw_spin_lock_irqsave(&logbuf_lock, flags);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (seen_seq != log_next_seq) {
wake_klogd = true;
seen_seq = log_next_seq;
}
if (console_seq < log_first_seq) {
len = sprintf(text, "** %u printk messages dropped ** ",
(unsigned)(log_first_seq - console_seq));
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
/* messages are gone, move to first one */
console_seq = log_first_seq;
console_idx = log_first_idx;
console_prev = 0;
} else {
len = 0;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
}
skip:
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (console_seq == log_next_seq)
break;
msg = log_from_idx(console_idx);
if (msg->flags & LOG_NOCONS) {
/*
* Skip record we have buffered and already printed
* directly to the console when we received it.
*/
console_idx = log_next(console_idx);
console_seq++;
/*
* We will get here again when we register a new
* CON_PRINTBUFFER console. Clear the flag so we
* will properly dump everything later.
*/
msg->flags &= ~LOG_NOCONS;
console_prev = msg->flags;
goto skip;
}
level = msg->level;
len += msg_print_text(msg, console_prev, false,
text + len, sizeof(text) - len);
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
if (nr_ext_console_drivers) {
ext_len = msg_print_ext_header(ext_text,
sizeof(ext_text),
msg, console_seq, console_prev);
ext_len += msg_print_ext_body(ext_text + ext_len,
sizeof(ext_text) - ext_len,
log_dict(msg), msg->dict_len,
log_text(msg), msg->text_len);
}
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
console_idx = log_next(console_idx);
console_seq++;
console_prev = msg->flags;
raw_spin_unlock(&logbuf_lock);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
ftrace: trace irq disabled critical timings This patch adds latency tracing for critical timings (how long interrupts are disabled for). "irqsoff" is added to /debugfs/tracing/available_tracers Note: tracing_max_latency also holds the max latency for irqsoff (in usecs). (default to large number so one must start latency tracing) tracing_thresh threshold (in usecs) to always print out if irqs off is detected to be longer than stated here. If irq_thresh is non-zero, then max_irq_latency is ignored. Here's an example of a trace with ftrace_enabled = 0 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 Signed-off-by: Ingo Molnar <mingo@elte.hu> -------------------------------------------------------------------- latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1d.s3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1d.s3 100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1d.s3 100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= And this is a trace with ftrace_enabled == 1 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 -------------------------------------------------------------------- latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1dNs3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000]) swapper-0 1dNs3 46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000]) swapper-0 1dNs3 47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000]) swapper-0 1dNs3 47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47) swapper-0 1dNs3 97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50) swapper-0 1dNs3 98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000]) swapper-0 1dNs3 99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000]) swapper-0 1dNs3 101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
stop_critical_timings(); /* don't trace print latency */
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
call_console_drivers(level, ext_text, ext_len, text, len);
ftrace: trace irq disabled critical timings This patch adds latency tracing for critical timings (how long interrupts are disabled for). "irqsoff" is added to /debugfs/tracing/available_tracers Note: tracing_max_latency also holds the max latency for irqsoff (in usecs). (default to large number so one must start latency tracing) tracing_thresh threshold (in usecs) to always print out if irqs off is detected to be longer than stated here. If irq_thresh is non-zero, then max_irq_latency is ignored. Here's an example of a trace with ftrace_enabled = 0 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 Signed-off-by: Ingo Molnar <mingo@elte.hu> -------------------------------------------------------------------- latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1d.s3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1d.s3 100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1d.s3 100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= And this is a trace with ftrace_enabled == 1 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 -------------------------------------------------------------------- latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1dNs3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000]) swapper-0 1dNs3 46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000]) swapper-0 1dNs3 47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000]) swapper-0 1dNs3 47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47) swapper-0 1dNs3 97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50) swapper-0 1dNs3 98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000]) swapper-0 1dNs3 99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000]) swapper-0 1dNs3 101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
start_critical_timings();
local_irq_restore(flags);
printk: do cond_resched() between lines while outputting to consoles @console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Calvin Owens <calvinowens@fb.com> Acked-by: Jan Kara <jack@suse.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Kyle McMartin <kyle@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:58:24 +00:00
if (do_cond_resched)
cond_resched();
}
console_locked = 0;
/* Release the exclusive_console once it is used */
if (unlikely(exclusive_console))
exclusive_console = NULL;
raw_spin_unlock(&logbuf_lock);
up_console_sem();
/*
* Someone could have filled up the buffer again, so re-check if there's
* something to flush. In case we cannot trylock the console_sem again,
* there's a new owner and the console_unlock() from them will do the
* flush, no worries.
*/
raw_spin_lock(&logbuf_lock);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
retry = console_seq != log_next_seq;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
if (retry && console_trylock())
goto again;
if (wake_klogd)
wake_up_klogd();
}
EXPORT_SYMBOL(console_unlock);
/**
* console_conditional_schedule - yield the CPU if required
*
* If the console code is currently allowed to sleep, and
* if this CPU should yield the CPU to another task, do
* so here.
*
* Must be called within console_lock();.
*/
void __sched console_conditional_schedule(void)
{
if (console_may_schedule)
cond_resched();
}
EXPORT_SYMBOL(console_conditional_schedule);
void console_unblank(void)
{
struct console *c;
/*
* console_unblank can no longer be called in interrupt context unless
* oops_in_progress is set to 1..
*/
if (oops_in_progress) {
if (down_trylock_console_sem() != 0)
return;
} else
console_lock();
console_locked = 1;
console_may_schedule = 0;
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
for_each_console(c)
if ((c->flags & CON_ENABLED) && c->unblank)
c->unblank();
console_unlock();
}
printk: do cond_resched() between lines while outputting to consoles @console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Calvin Owens <calvinowens@fb.com> Acked-by: Jan Kara <jack@suse.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Kyle McMartin <kyle@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:58:24 +00:00
/**
* console_flush_on_panic - flush console content on panic
*
* Immediately output all pending messages no matter what.
*/
void console_flush_on_panic(void)
{
/*
* If someone else is holding the console lock, trylock will fail
* and may_schedule may be set. Ignore and proceed to unlock so
* that messages are flushed out. As this can be called from any
* context and we don't want to get preempted while flushing,
* ensure may_schedule is cleared.
*/
console_trylock();
console_may_schedule = 0;
console_unlock();
}
/*
* Return the console tty driver structure and its associated index
*/
struct tty_driver *console_device(int *index)
{
struct console *c;
struct tty_driver *driver = NULL;
console_lock();
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
for_each_console(c) {
if (!c->device)
continue;
driver = c->device(c, index);
if (driver)
break;
}
console_unlock();
return driver;
}
/*
* Prevent further output on the passed console device so that (for example)
* serial drivers can disable console output before suspending a port, and can
* re-enable output afterwards.
*/
void console_stop(struct console *console)
{
console_lock();
console->flags &= ~CON_ENABLED;
console_unlock();
}
EXPORT_SYMBOL(console_stop);
void console_start(struct console *console)
{
console_lock();
console->flags |= CON_ENABLED;
console_unlock();
}
EXPORT_SYMBOL(console_start);
static int __read_mostly keep_bootcon;
static int __init keep_bootcon_setup(char *str)
{
keep_bootcon = 1;
pr_info("debug: skip boot console de-registration.\n");
return 0;
}
early_param("keep_bootcon", keep_bootcon_setup);
/*
* The console driver calls this routine during kernel initialization
* to register the console printing procedure with printk() and to
* print any messages that were printed by the kernel before the
* console driver was initialized.
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
*
* This can happen pretty early during the boot process (because of
* early_printk) - sometimes before setup_arch() completes - be careful
* of what kernel features are used - they may not be initialised yet.
*
* There are two types of consoles - bootconsoles (early_printk) and
* "real" consoles (everything which is not a bootconsole) which are
* handled differently.
* - Any number of bootconsoles can be registered at any time.
* - As soon as a "real" console is registered, all bootconsoles
* will be unregistered automatically.
* - Once a "real" console is registered, any attempt to register a
* bootconsoles will be rejected
*/
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
void register_console(struct console *newcon)
{
int i;
unsigned long flags;
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
struct console *bcon = NULL;
struct console_cmdline *c;
if (console_drivers)
for_each_console(bcon)
if (WARN(bcon == newcon,
"console '%s%d' already registered\n",
bcon->name, bcon->index))
return;
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
/*
* before we register a new CON_BOOT console, make sure we don't
* already have a valid console
*/
if (console_drivers && newcon->flags & CON_BOOT) {
/* find the last or real console */
for_each_console(bcon) {
if (!(bcon->flags & CON_BOOT)) {
pr_info("Too late to register bootconsole %s%d\n",
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
newcon->name, newcon->index);
return;
}
}
Fixes and cleanups for earlyprintk aka boot console The console subsystem already has an idea of a boot console, using the CON_BOOT flag. The implementation has some flaws though. The major problem is that presence of a boot console makes register_console() ignore any other console devices (unless explicitly specified on the kernel command line). This patch fixes the console selection code to *not* consider a boot console a full-featured one, so the first non-boot console registering will become the default console instead. This way the unregister call for the boot console in the register_console() function actually triggers and the handover from the boot console to the real console device works smoothly. Added a printk for the handover, so you know which console device the output goes to when the boot console stops printing messages. The disable_early_printk() call is obsolete with that patch, explicitly disabling the early console isn't needed any more as it works automagically with that patch. I've walked through the tree, dropped all disable_early_printk() instances found below arch/ and tagged the consoles with CON_BOOT if needed. The code is tested on x86, sh (thanks to Paul) and mips (thanks to Ralf). Changes to last version: Rediffed against -rc3, adapted to mips cleanups by Ralf, fixed "udbg-immortal" cmd line arg on powerpc. Signed-off-by: Gerd Hoffmann <kraxel@exsuse.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 07:26:49 +00:00
}
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
if (console_drivers && console_drivers->flags & CON_BOOT)
bcon = console_drivers;
if (preferred_console < 0 || bcon || !console_drivers)
preferred_console = selected_console;
/*
* See if we want to use this console driver. If we
* didn't select a console we take the first one
* that registers here.
*/
if (preferred_console < 0) {
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
if (newcon->index < 0)
newcon->index = 0;
if (newcon->setup == NULL ||
newcon->setup(newcon, NULL) == 0) {
newcon->flags |= CON_ENABLED;
if (newcon->device) {
newcon->flags |= CON_CONSDEV;
preferred_console = 0;
}
}
}
/*
* See if this console matches one we selected on
* the command line.
*/
for (i = 0, c = console_cmdline;
i < MAX_CMDLINECONSOLES && c->name[0];
i++, c++) {
if (!newcon->match ||
newcon->match(newcon, c->name, c->index, c->options) != 0) {
/* default matching */
BUILD_BUG_ON(sizeof(c->name) != sizeof(newcon->name));
if (strcmp(c->name, newcon->name) != 0)
continue;
if (newcon->index >= 0 &&
newcon->index != c->index)
continue;
if (newcon->index < 0)
newcon->index = c->index;
if (_braille_register_console(newcon, c))
return;
if (newcon->setup &&
newcon->setup(newcon, c->options) != 0)
break;
}
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
newcon->flags |= CON_ENABLED;
[PATCH] CON_CONSDEV bit not set correctly on last console According to include/linux/console.h, CON_CONSDEV flag should be set on the last console specified on the boot command line: 86 #define CON_PRINTBUFFER (1) 87 #define CON_CONSDEV (2) /* Last on the command line */ 88 #define CON_ENABLED (4) 89 #define CON_BOOT (8) This does not currently happen if there is more than one console specified on the boot commandline. Instead, it gets set on the first console on the command line. This can cause problems for things like kdb that look for the CON_CONSDEV flag to see if the console is valid. Additionaly, it doesn't look like CON_CONSDEV is reassigned to the next preferred console at unregister time if the console being unregistered currently has that bit set. Example (from sn2 ia64): elilo vmlinuz root=<dev> console=ttyS0 console=ttySG0 in this case, the flags on ttySG console struct will be 0x4 (should be 0x6). Attached patch against bk fixes both issues for the cases I looked at. It uses selected_console (which gets incremented for each console specified on the command line) as the indicator of which console to set CON_CONSDEV on. When adding the console to the list, if the previous one had CON_CONSDEV set, it masks it out. Tested on ia64 and x86. The problem with the current behavior is it breaks overriding the default from the boot line. In the ia64 case, there may be a global append line defining console=a in elilo.conf. Then you want to boot your kernel, and want to override the default by passing console=b on the boot line. elilo constructs the kernel cmdline by starting with the value of the global append line, then tacks on whatever else you specify, which puts console=b last. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:05 +00:00
if (i == selected_console) {
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
newcon->flags |= CON_CONSDEV;
[PATCH] CON_CONSDEV bit not set correctly on last console According to include/linux/console.h, CON_CONSDEV flag should be set on the last console specified on the boot command line: 86 #define CON_PRINTBUFFER (1) 87 #define CON_CONSDEV (2) /* Last on the command line */ 88 #define CON_ENABLED (4) 89 #define CON_BOOT (8) This does not currently happen if there is more than one console specified on the boot commandline. Instead, it gets set on the first console on the command line. This can cause problems for things like kdb that look for the CON_CONSDEV flag to see if the console is valid. Additionaly, it doesn't look like CON_CONSDEV is reassigned to the next preferred console at unregister time if the console being unregistered currently has that bit set. Example (from sn2 ia64): elilo vmlinuz root=<dev> console=ttyS0 console=ttySG0 in this case, the flags on ttySG console struct will be 0x4 (should be 0x6). Attached patch against bk fixes both issues for the cases I looked at. It uses selected_console (which gets incremented for each console specified on the command line) as the indicator of which console to set CON_CONSDEV on. When adding the console to the list, if the previous one had CON_CONSDEV set, it masks it out. Tested on ia64 and x86. The problem with the current behavior is it breaks overriding the default from the boot line. In the ia64 case, there may be a global append line defining console=a in elilo.conf. Then you want to boot your kernel, and want to override the default by passing console=b on the boot line. elilo constructs the kernel cmdline by starting with the value of the global append line, then tacks on whatever else you specify, which puts console=b last. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:05 +00:00
preferred_console = selected_console;
}
break;
}
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
if (!(newcon->flags & CON_ENABLED))
return;
/*
* If we have a bootconsole, and are switching to a real console,
* don't print everything out again, since when the boot console, and
* the real console are the same physical device, it's annoying to
* see the beginning boot messages twice
*/
if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV))
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
newcon->flags &= ~CON_PRINTBUFFER;
/*
* Put this console in the list - keep the
* preferred driver at the head of the list.
*/
console_lock();
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) {
newcon->next = console_drivers;
console_drivers = newcon;
if (newcon->next)
newcon->next->flags &= ~CON_CONSDEV;
} else {
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
newcon->next = console_drivers->next;
console_drivers->next = newcon;
}
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
if (newcon->flags & CON_EXTENDED)
if (!nr_ext_console_drivers++)
pr_info("printk: continuation disabled due to ext consoles, expect more fragments in /dev/kmsg\n");
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
if (newcon->flags & CON_PRINTBUFFER) {
/*
* console_unlock(); will print out the buffered messages
* for us.
*/
raw_spin_lock_irqsave(&logbuf_lock, flags);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
console_seq = syslog_seq;
console_idx = syslog_idx;
console_prev = syslog_prev;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
/*
* We're about to replay the log buffer. Only do this to the
* just-registered console to avoid excessive message spam to
* the already-registered consoles.
*/
exclusive_console = newcon;
}
console_unlock();
console_sysfs_notify();
/*
* By unregistering the bootconsoles after we enable the real console
* we get the "console xxx enabled" message on all the consoles -
* boot consoles, real consoles, etc - this is to ensure that end
* users know there might be something in the kernel's log buffer that
* went to the bootconsole (that they do not see on the real console)
*/
pr_info("%sconsole [%s%d] enabled\n",
(newcon->flags & CON_BOOT) ? "boot" : "" ,
newcon->name, newcon->index);
if (bcon &&
((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV) &&
!keep_bootcon) {
/* We need to iterate through all boot consoles, to make
* sure we print everything out, before we unregister them.
*/
for_each_console(bcon)
if (bcon->flags & CON_BOOT)
unregister_console(bcon);
}
}
EXPORT_SYMBOL(register_console);
int unregister_console(struct console *console)
{
struct console *a, *b;
int res;
pr_info("%sconsole [%s%d] disabled\n",
(console->flags & CON_BOOT) ? "boot" : "" ,
console->name, console->index);
res = _braille_unregister_console(console);
if (res)
return res;
res = 1;
console_lock();
if (console_drivers == console) {
console_drivers=console->next;
res = 0;
} else if (console_drivers) {
for (a=console_drivers->next, b=console_drivers ;
a; b=a, a=b->next) {
if (a == console) {
b->next = a->next;
res = 0;
break;
}
}
}
printk: implement support for extended console drivers printk log_buf keeps various metadata for each message including its sequence number and timestamp. The metadata is currently available only through /dev/kmsg and stripped out before passed onto console drivers. We want this metadata to be available to console drivers too so that console consumers can get full information including the metadata and dictionary, which among other things can be used to detect whether messages got lost in transit. This patch implements support for extended console drivers. Consoles can indicate that they want extended messages by setting the new CON_EXTENDED flag and they'll be fed messages formatted the same way as /dev/kmsg. "<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n" If extended consoles exist, in-kernel fragment assembly is disabled. This ensures that all messages emitted to consoles have full metadata including sequence number. The contflag carries enough information to reassemble the fragments from the reader side trivially. Note that this only affects /dev/kmsg. Regular console and /proc/kmsg outputs are not affected by this change. * Extended message formatting for console drivers is enabled iff there are registered extended consoles. * Comment describing /dev/kmsg message format updated to add missing contflag field and help distinguishing variable from verbatim terms. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Miller <davem@davemloft.net> Cc: Kay Sievers <kay@vrfy.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:01:30 +00:00
if (!res && (console->flags & CON_EXTENDED))
nr_ext_console_drivers--;
Fixes and cleanups for earlyprintk aka boot console The console subsystem already has an idea of a boot console, using the CON_BOOT flag. The implementation has some flaws though. The major problem is that presence of a boot console makes register_console() ignore any other console devices (unless explicitly specified on the kernel command line). This patch fixes the console selection code to *not* consider a boot console a full-featured one, so the first non-boot console registering will become the default console instead. This way the unregister call for the boot console in the register_console() function actually triggers and the handover from the boot console to the real console device works smoothly. Added a printk for the handover, so you know which console device the output goes to when the boot console stops printing messages. The disable_early_printk() call is obsolete with that patch, explicitly disabling the early console isn't needed any more as it works automagically with that patch. I've walked through the tree, dropped all disable_early_printk() instances found below arch/ and tagged the consoles with CON_BOOT if needed. The code is tested on x86, sh (thanks to Paul) and mips (thanks to Ralf). Changes to last version: Rediffed against -rc3, adapted to mips cleanups by Ralf, fixed "udbg-immortal" cmd line arg on powerpc. Signed-off-by: Gerd Hoffmann <kraxel@exsuse.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 07:26:49 +00:00
/*
[PATCH] CON_CONSDEV bit not set correctly on last console According to include/linux/console.h, CON_CONSDEV flag should be set on the last console specified on the boot command line: 86 #define CON_PRINTBUFFER (1) 87 #define CON_CONSDEV (2) /* Last on the command line */ 88 #define CON_ENABLED (4) 89 #define CON_BOOT (8) This does not currently happen if there is more than one console specified on the boot commandline. Instead, it gets set on the first console on the command line. This can cause problems for things like kdb that look for the CON_CONSDEV flag to see if the console is valid. Additionaly, it doesn't look like CON_CONSDEV is reassigned to the next preferred console at unregister time if the console being unregistered currently has that bit set. Example (from sn2 ia64): elilo vmlinuz root=<dev> console=ttyS0 console=ttySG0 in this case, the flags on ttySG console struct will be 0x4 (should be 0x6). Attached patch against bk fixes both issues for the cases I looked at. It uses selected_console (which gets incremented for each console specified on the command line) as the indicator of which console to set CON_CONSDEV on. When adding the console to the list, if the previous one had CON_CONSDEV set, it masks it out. Tested on ia64 and x86. The problem with the current behavior is it breaks overriding the default from the boot line. In the ia64 case, there may be a global append line defining console=a in elilo.conf. Then you want to boot your kernel, and want to override the default by passing console=b on the boot line. elilo constructs the kernel cmdline by starting with the value of the global append line, then tacks on whatever else you specify, which puts console=b last. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:05 +00:00
* If this isn't the last console and it has CON_CONSDEV set, we
* need to set it on the next preferred console.
*/
Fixes and cleanups for earlyprintk aka boot console The console subsystem already has an idea of a boot console, using the CON_BOOT flag. The implementation has some flaws though. The major problem is that presence of a boot console makes register_console() ignore any other console devices (unless explicitly specified on the kernel command line). This patch fixes the console selection code to *not* consider a boot console a full-featured one, so the first non-boot console registering will become the default console instead. This way the unregister call for the boot console in the register_console() function actually triggers and the handover from the boot console to the real console device works smoothly. Added a printk for the handover, so you know which console device the output goes to when the boot console stops printing messages. The disable_early_printk() call is obsolete with that patch, explicitly disabling the early console isn't needed any more as it works automagically with that patch. I've walked through the tree, dropped all disable_early_printk() instances found below arch/ and tagged the consoles with CON_BOOT if needed. The code is tested on x86, sh (thanks to Paul) and mips (thanks to Ralf). Changes to last version: Rediffed against -rc3, adapted to mips cleanups by Ralf, fixed "udbg-immortal" cmd line arg on powerpc. Signed-off-by: Gerd Hoffmann <kraxel@exsuse.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 07:26:49 +00:00
if (console_drivers != NULL && console->flags & CON_CONSDEV)
[PATCH] CON_CONSDEV bit not set correctly on last console According to include/linux/console.h, CON_CONSDEV flag should be set on the last console specified on the boot command line: 86 #define CON_PRINTBUFFER (1) 87 #define CON_CONSDEV (2) /* Last on the command line */ 88 #define CON_ENABLED (4) 89 #define CON_BOOT (8) This does not currently happen if there is more than one console specified on the boot commandline. Instead, it gets set on the first console on the command line. This can cause problems for things like kdb that look for the CON_CONSDEV flag to see if the console is valid. Additionaly, it doesn't look like CON_CONSDEV is reassigned to the next preferred console at unregister time if the console being unregistered currently has that bit set. Example (from sn2 ia64): elilo vmlinuz root=<dev> console=ttyS0 console=ttySG0 in this case, the flags on ttySG console struct will be 0x4 (should be 0x6). Attached patch against bk fixes both issues for the cases I looked at. It uses selected_console (which gets incremented for each console specified on the command line) as the indicator of which console to set CON_CONSDEV on. When adding the console to the list, if the previous one had CON_CONSDEV set, it masks it out. Tested on ia64 and x86. The problem with the current behavior is it breaks overriding the default from the boot line. In the ia64 case, there may be a global append line defining console=a in elilo.conf. Then you want to boot your kernel, and want to override the default by passing console=b on the boot line. elilo constructs the kernel cmdline by starting with the value of the global append line, then tacks on whatever else you specify, which puts console=b last. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:09:05 +00:00
console_drivers->flags |= CON_CONSDEV;
printk/of_serial: fix serial console cessation part way through boot. Commit 5f5c9ae56c38942623f69c3e6dc6ec78e4da2076 "serial_core: Unregister console in uart_remove_one_port()" fixed a crash where a serial port was removed but not deregistered as a console. There is a side effect of that commit for platforms having serial consoles and of_serial configured (CONFIG_SERIAL_OF_PLATFORM). The serial console is disabled midway through the boot process. This cessation of the serial console affects PowerPC computers such as the MVME5100 and SAM440EP. The sequence is: bootconsole [udbg0] enabled .... serial8250/16550 driver initialises and registers its UARTS, one of these is the serial console. console [ttyS0] enabled .... of_serial probes "platform" devices, registering them as it goes. One of these is the serial console. console [ttyS0] disabled. The disabling of the serial console is due to: a. unregister_console in printk not clearing the CONS_ENABLED bit in the console flags, even though it has announced that the console is disabled; and b. of_platform_serial_probe in of_serial not setting the port type before it registers with serial8250_register_8250_port. This patch ensures that the serial console is re-enabled when of_serial registers a serial port that corresponds to the designated console. Signed-off-by: Stephen Chivers <schivers@csc.com> Tested-by: Stephen Chivers <schivers@csc.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [unregister_console] Cc: stable <stable@vger.kernel.org> # 3.15 === The above failure was identified in Linux-3.15-rc2. Tested using MVME5100 and SAM440EP PowerPC computers with kernels built from Linux-3.15-rc5 and tty-next. The continued operation of the serial console is vital for computers such as the MVME5100 as that Single Board Computer does not have any grapical/display hardware. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-13 22:04:39 +00:00
console->flags &= ~CON_ENABLED;
console_unlock();
console_sysfs_notify();
return res;
}
EXPORT_SYMBOL(unregister_console);
/*
* Some boot consoles access data that is in the init section and which will
* be discarded after the initcalls have been run. To make sure that no code
* will access this data, unregister the boot consoles in a late initcall.
*
* If for some reason, such as deferred probe or the driver being a loadable
* module, the real console hasn't registered yet at this point, there will
* be a brief interval in which no messages are logged to the console, which
* makes it difficult to diagnose problems that occur during this time.
*
* To mitigate this problem somewhat, only unregister consoles whose memory
* intersects with the init section. Note that code exists elsewhere to get
* rid of the boot console as soon as the proper console shows up, so there
* won't be side-effects from postponing the removal.
*/
printk: fix delayed messages from CPU hotplug events When a secondary CPU is being brought up, it is not uncommon for printk() to be invoked when cpu_online(smp_processor_id()) == 0. The case that I witnessed personally was on MIPS: http://lkml.org/lkml/2010/5/30/4 If (can_use_console() == 0), printk() will spool its output to log_buf and it will be visible in "dmesg", but that output will NOT be echoed to the console until somebody calls release_console_sem() from a CPU that is online. Therefore, the boot time messages from the new CPU can get stuck in "limbo" for a long time, and might suddenly appear on the screen when a completely unrelated event (e.g. "eth0: link is down") occurs. This patch modifies the console code so that any pending messages are automatically flushed out to the console whenever a CPU hotplug operation completes successfully or aborts. The issue was seen on 2.6.34. Original patch by Kevin Cernekee with cleanups by akpm and additional fixes by Santosh Shilimkar. This patch superseeds https://patchwork.linux-mips.org/patch/1357/. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> To: <mingo@elte.hu> To: <akpm@linux-foundation.org> To: <simon.kagstrom@netinsight.net> To: <David.Woodhouse@intel.com> To: <lethal@linux-sh.org> Cc: <linux-kernel@vger.kernel.org> Cc: <linux-mips@linux-mips.org> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1534/ LKML-Reference: <ede63b5a20af951c755736f035d1e787772d7c28@localhost> LKML-Reference: <EAF47CD23C76F840A9E7FCE10091EFAB02C5DB6D1F@dbde02.ent.ti.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-06-04 05:11:25 +00:00
static int __init printk_late_init(void)
{
printk: Enable the use of more than one CON_BOOT (early console) Today, register_console() assumes the following usage: - The first console to register with a flag set to CON_BOOT is the one and only bootconsole. - If another register_console() is called with an additional CON_BOOT, it is silently rejected. - As soon as a console without the CON_BOOT set calls registers the bootconsole is automatically unregistered. - Once there is a "real" console - register_console() will silently reject any consoles with it's CON_BOOT flag set. In many systems (alpha, blackfin, microblaze, mips, powerpc, sh, & x86), there are early_printk implementations, which use the CON_BOOT which come out serial ports, vga, usb, & memory buffers. In many embedded systems, it would be nice to have two bootconsoles - in case the primary fails, you always have access to a backup memory buffer - but this requires at least two CON_BOOT consoles... This patch enables that functionality. With the change applied, on boot you get (if you try to re-enable a boot console after the "real" console has been registered): root:/> dmesg | grep console bootconsole [early_shadow0] enabled bootconsole [early_BFuart0] enabled Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 console=ttyBF0,57600 nmi_debug=regs console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0] Too late to register bootconsole early_shadow0 or: root:/> dmesg | grep console Kernel command line: root=/dev/mtdblock0 rw console=ttyBF0,57600 console [ttyBF0] enabled Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Cc: "Linus Torvalds" <torvalds@linux-foundation.org> Cc: "Andrew Morton" <akpm@linux-foundation.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Cc: "Paul Mundt" <lethal@linux-sh.org> LKML-Reference: <200907012108.38030.rgetz@blackfin.uclinux.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 01:08:37 +00:00
struct console *con;
for_each_console(con) {
if (!keep_bootcon && con->flags & CON_BOOT) {
/*
* Make sure to unregister boot consoles whose data
* resides in the init section before the init section
* is discarded. Boot consoles whose data will stick
* around will automatically be unregistered when the
* proper console replaces them.
*/
if (init_section_intersects(con, sizeof(*con)))
unregister_console(con);
}
}
printk: fix delayed messages from CPU hotplug events When a secondary CPU is being brought up, it is not uncommon for printk() to be invoked when cpu_online(smp_processor_id()) == 0. The case that I witnessed personally was on MIPS: http://lkml.org/lkml/2010/5/30/4 If (can_use_console() == 0), printk() will spool its output to log_buf and it will be visible in "dmesg", but that output will NOT be echoed to the console until somebody calls release_console_sem() from a CPU that is online. Therefore, the boot time messages from the new CPU can get stuck in "limbo" for a long time, and might suddenly appear on the screen when a completely unrelated event (e.g. "eth0: link is down") occurs. This patch modifies the console code so that any pending messages are automatically flushed out to the console whenever a CPU hotplug operation completes successfully or aborts. The issue was seen on 2.6.34. Original patch by Kevin Cernekee with cleanups by akpm and additional fixes by Santosh Shilimkar. This patch superseeds https://patchwork.linux-mips.org/patch/1357/. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> To: <mingo@elte.hu> To: <akpm@linux-foundation.org> To: <simon.kagstrom@netinsight.net> To: <David.Woodhouse@intel.com> To: <lethal@linux-sh.org> Cc: <linux-kernel@vger.kernel.org> Cc: <linux-mips@linux-mips.org> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1534/ LKML-Reference: <ede63b5a20af951c755736f035d1e787772d7c28@localhost> LKML-Reference: <EAF47CD23C76F840A9E7FCE10091EFAB02C5DB6D1F@dbde02.ent.ti.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-06-04 05:11:25 +00:00
hotcpu_notifier(console_cpu_notify, 0);
return 0;
}
printk: fix delayed messages from CPU hotplug events When a secondary CPU is being brought up, it is not uncommon for printk() to be invoked when cpu_online(smp_processor_id()) == 0. The case that I witnessed personally was on MIPS: http://lkml.org/lkml/2010/5/30/4 If (can_use_console() == 0), printk() will spool its output to log_buf and it will be visible in "dmesg", but that output will NOT be echoed to the console until somebody calls release_console_sem() from a CPU that is online. Therefore, the boot time messages from the new CPU can get stuck in "limbo" for a long time, and might suddenly appear on the screen when a completely unrelated event (e.g. "eth0: link is down") occurs. This patch modifies the console code so that any pending messages are automatically flushed out to the console whenever a CPU hotplug operation completes successfully or aborts. The issue was seen on 2.6.34. Original patch by Kevin Cernekee with cleanups by akpm and additional fixes by Santosh Shilimkar. This patch superseeds https://patchwork.linux-mips.org/patch/1357/. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> To: <mingo@elte.hu> To: <akpm@linux-foundation.org> To: <simon.kagstrom@netinsight.net> To: <David.Woodhouse@intel.com> To: <lethal@linux-sh.org> Cc: <linux-kernel@vger.kernel.org> Cc: <linux-mips@linux-mips.org> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1534/ LKML-Reference: <ede63b5a20af951c755736f035d1e787772d7c28@localhost> LKML-Reference: <EAF47CD23C76F840A9E7FCE10091EFAB02C5DB6D1F@dbde02.ent.ti.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-06-04 05:11:25 +00:00
late_initcall(printk_late_init);
#if defined CONFIG_PRINTK
/*
* Delayed printk version, for scheduler-internal messages:
*/
#define PRINTK_PENDING_WAKEUP 0x01
printk: remove separate printk_sched buffers and use printk buf instead To prevent deadlocks with doing a printk inside the scheduler, printk_sched() was created. The issue is that printk has a console_sem that it can grab and release. The release does a wake up if there's a task pending on the sem, and this wake up grabs the rq locks that is held in the scheduler. This leads to a possible deadlock if the wake up uses the same rq as the one with the rq lock held already. What printk_sched() does is to save the printk write in a per cpu buffer and sets the PRINTK_PENDING_SCHED flag. On a timer tick, if this flag is set, the printk() is done against the buffer. There's a couple of issues with this approach. 1) If two printk_sched()s are called before the tick, the second one will overwrite the first one. 2) The temporary buffer is 512 bytes and is per cpu. This is a quite a bit of space wasted for something that is seldom used. In order to remove this, the printk_sched() can use the printk buffer instead, and delay the console_trylock()/console_unlock() to the queued work. Because printk_sched() would then be taking the logbuf_lock, the logbuf_lock must not be held while doing anything that may call into the scheduler functions, which includes wake ups. Unfortunately, printk() also has a console_sem that it uses, and on release, the up(&console_sem) may do a wake up of any pending waiters. This must be avoided while holding the logbuf_lock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:38 +00:00
#define PRINTK_PENDING_OUTPUT 0x02
static DEFINE_PER_CPU(int, printk_pending);
static void wake_up_klogd_work_func(struct irq_work *irq_work)
{
int pending = __this_cpu_xchg(printk_pending, 0);
printk: remove separate printk_sched buffers and use printk buf instead To prevent deadlocks with doing a printk inside the scheduler, printk_sched() was created. The issue is that printk has a console_sem that it can grab and release. The release does a wake up if there's a task pending on the sem, and this wake up grabs the rq locks that is held in the scheduler. This leads to a possible deadlock if the wake up uses the same rq as the one with the rq lock held already. What printk_sched() does is to save the printk write in a per cpu buffer and sets the PRINTK_PENDING_SCHED flag. On a timer tick, if this flag is set, the printk() is done against the buffer. There's a couple of issues with this approach. 1) If two printk_sched()s are called before the tick, the second one will overwrite the first one. 2) The temporary buffer is 512 bytes and is per cpu. This is a quite a bit of space wasted for something that is seldom used. In order to remove this, the printk_sched() can use the printk buffer instead, and delay the console_trylock()/console_unlock() to the queued work. Because printk_sched() would then be taking the logbuf_lock, the logbuf_lock must not be held while doing anything that may call into the scheduler functions, which includes wake ups. Unfortunately, printk() also has a console_sem that it uses, and on release, the up(&console_sem) may do a wake up of any pending waiters. This must be avoided while holding the logbuf_lock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:38 +00:00
if (pending & PRINTK_PENDING_OUTPUT) {
/* If trylock fails, someone else is doing the printing */
if (console_trylock())
console_unlock();
}
if (pending & PRINTK_PENDING_WAKEUP)
wake_up_interruptible(&log_wait);
}
static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
.func = wake_up_klogd_work_func,
.flags = IRQ_WORK_LAZY,
};
void wake_up_klogd(void)
{
preempt_disable();
if (waitqueue_active(&log_wait)) {
this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
irq_work_queue(this_cpu_ptr(&wake_up_klogd_work));
}
preempt_enable();
}
int printk_deferred(const char *fmt, ...)
{
va_list args;
int r;
preempt_disable();
va_start(args, fmt);
r = vprintk_emit(0, LOGLEVEL_SCHED, NULL, 0, fmt, args);
va_end(args);
printk: remove separate printk_sched buffers and use printk buf instead To prevent deadlocks with doing a printk inside the scheduler, printk_sched() was created. The issue is that printk has a console_sem that it can grab and release. The release does a wake up if there's a task pending on the sem, and this wake up grabs the rq locks that is held in the scheduler. This leads to a possible deadlock if the wake up uses the same rq as the one with the rq lock held already. What printk_sched() does is to save the printk write in a per cpu buffer and sets the PRINTK_PENDING_SCHED flag. On a timer tick, if this flag is set, the printk() is done against the buffer. There's a couple of issues with this approach. 1) If two printk_sched()s are called before the tick, the second one will overwrite the first one. 2) The temporary buffer is 512 bytes and is per cpu. This is a quite a bit of space wasted for something that is seldom used. In order to remove this, the printk_sched() can use the printk buffer instead, and delay the console_trylock()/console_unlock() to the queued work. Because printk_sched() would then be taking the logbuf_lock, the logbuf_lock must not be held while doing anything that may call into the scheduler functions, which includes wake ups. Unfortunately, printk() also has a console_sem that it uses, and on release, the up(&console_sem) may do a wake up of any pending waiters. This must be avoided while holding the logbuf_lock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:11:38 +00:00
__this_cpu_or(printk_pending, PRINTK_PENDING_OUTPUT);
irq_work_queue(this_cpu_ptr(&wake_up_klogd_work));
preempt_enable();
return r;
}
/*
* printk rate limiting, lifted from the networking subsystem.
*
* This enforces a rate limit: not more than 10 kernel messages
* every 5s to make a denial-of-service attack impossible.
*/
DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
int __printk_ratelimit(const char *func)
{
return ___ratelimit(&printk_ratelimit_state, func);
}
EXPORT_SYMBOL(__printk_ratelimit);
/**
* printk_timed_ratelimit - caller-controlled printk ratelimiting
* @caller_jiffies: pointer to caller's state
* @interval_msecs: minimum interval between prints
*
* printk_timed_ratelimit() returns true if more than @interval_msecs
* milliseconds have elapsed since the last time printk_timed_ratelimit()
* returned true.
*/
bool printk_timed_ratelimit(unsigned long *caller_jiffies,
unsigned int interval_msecs)
{
unsigned long elapsed = jiffies - *caller_jiffies;
if (*caller_jiffies && elapsed <= msecs_to_jiffies(interval_msecs))
return false;
*caller_jiffies = jiffies;
return true;
}
EXPORT_SYMBOL(printk_timed_ratelimit);
static DEFINE_SPINLOCK(dump_list_lock);
static LIST_HEAD(dump_list);
/**
* kmsg_dump_register - register a kernel log dumper.
* @dumper: pointer to the kmsg_dumper structure
*
* Adds a kernel log dumper to the system. The dump callback in the
* structure will be called when the kernel oopses or panics and must be
* set. Returns zero on success and %-EINVAL or %-EBUSY otherwise.
*/
int kmsg_dump_register(struct kmsg_dumper *dumper)
{
unsigned long flags;
int err = -EBUSY;
/* The dump callback needs to be set */
if (!dumper->dump)
return -EINVAL;
spin_lock_irqsave(&dump_list_lock, flags);
/* Don't allow registering multiple times */
if (!dumper->registered) {
dumper->registered = 1;
list_add_tail_rcu(&dumper->list, &dump_list);
err = 0;
}
spin_unlock_irqrestore(&dump_list_lock, flags);
return err;
}
EXPORT_SYMBOL_GPL(kmsg_dump_register);
/**
* kmsg_dump_unregister - unregister a kmsg dumper.
* @dumper: pointer to the kmsg_dumper structure
*
* Removes a dump device from the system. Returns zero on success and
* %-EINVAL otherwise.
*/
int kmsg_dump_unregister(struct kmsg_dumper *dumper)
{
unsigned long flags;
int err = -EINVAL;
spin_lock_irqsave(&dump_list_lock, flags);
if (dumper->registered) {
dumper->registered = 0;
list_del_rcu(&dumper->list);
err = 0;
}
spin_unlock_irqrestore(&dump_list_lock, flags);
synchronize_rcu();
return err;
}
EXPORT_SYMBOL_GPL(kmsg_dump_unregister);
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
static bool always_kmsg_dump;
module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR);
/**
* kmsg_dump - dump kernel log to kernel message dumpers.
* @reason: the reason (oops, panic etc) for dumping
*
* Call each of the registered dumper's dump() callback, which can
* retrieve the kmsg records with kmsg_dump_get_line() or
* kmsg_dump_get_buffer().
*/
void kmsg_dump(enum kmsg_dump_reason reason)
{
struct kmsg_dumper *dumper;
unsigned long flags;
if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
return;
rcu_read_lock();
list_for_each_entry_rcu(dumper, &dump_list, list) {
if (dumper->max_reason && reason > dumper->max_reason)
continue;
/* initialize iterator with data about the stored records */
dumper->active = true;
raw_spin_lock_irqsave(&logbuf_lock, flags);
dumper->cur_seq = clear_seq;
dumper->cur_idx = clear_idx;
dumper->next_seq = log_next_seq;
dumper->next_idx = log_next_idx;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
/* invoke dumper which will iterate over records */
dumper->dump(dumper, reason);
/* reset iterator */
dumper->active = false;
}
rcu_read_unlock();
}
/**
* kmsg_dump_get_line_nolock - retrieve one kmsg log line (unlocked version)
* @dumper: registered kmsg dumper
* @syslog: include the "<4>" prefixes
* @line: buffer to copy the line to
* @size: maximum size of the buffer
* @len: length of line placed into buffer
*
* Start at the beginning of the kmsg buffer, with the oldest kmsg
* record, and copy one record into the provided buffer.
*
* Consecutive calls will return the next available record moving
* towards the end of the buffer with the youngest messages.
*
* A return value of FALSE indicates that there are no more records to
* read.
*
* The function is similar to kmsg_dump_get_line(), but grabs no locks.
*/
bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
char *line, size_t size, size_t *len)
{
struct printk_log *msg;
size_t l = 0;
bool ret = false;
if (!dumper->active)
goto out;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
if (dumper->cur_seq < log_first_seq) {
/* messages are gone, move to first available one */
dumper->cur_seq = log_first_seq;
dumper->cur_idx = log_first_idx;
}
/* last entry */
if (dumper->cur_seq >= log_next_seq)
goto out;
msg = log_from_idx(dumper->cur_idx);
l = msg_print_text(msg, 0, syslog, line, size);
dumper->cur_idx = log_next(dumper->cur_idx);
dumper->cur_seq++;
ret = true;
out:
if (len)
*len = l;
return ret;
}
/**
* kmsg_dump_get_line - retrieve one kmsg log line
* @dumper: registered kmsg dumper
* @syslog: include the "<4>" prefixes
* @line: buffer to copy the line to
* @size: maximum size of the buffer
* @len: length of line placed into buffer
*
* Start at the beginning of the kmsg buffer, with the oldest kmsg
* record, and copy one record into the provided buffer.
*
* Consecutive calls will return the next available record moving
* towards the end of the buffer with the youngest messages.
*
* A return value of FALSE indicates that there are no more records to
* read.
*/
bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
char *line, size_t size, size_t *len)
{
unsigned long flags;
bool ret;
raw_spin_lock_irqsave(&logbuf_lock, flags);
ret = kmsg_dump_get_line_nolock(dumper, syslog, line, size, len);
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
return ret;
}
EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
/**
* kmsg_dump_get_buffer - copy kmsg log lines
* @dumper: registered kmsg dumper
* @syslog: include the "<4>" prefixes
* @buf: buffer to copy the line to
* @size: maximum size of the buffer
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
* with as many of the the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
* Consecutive calls will fill the buffer with the next block of
* available older records, not including the earlier retrieved ones.
*
* A return value of FALSE indicates that there are no more records to
* read.
*/
bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
char *buf, size_t size, size_t *len)
{
unsigned long flags;
u64 seq;
u32 idx;
u64 next_seq;
u32 next_idx;
enum log_flags prev;
size_t l = 0;
bool ret = false;
if (!dumper->active)
goto out;
raw_spin_lock_irqsave(&logbuf_lock, flags);
if (dumper->cur_seq < log_first_seq) {
/* messages are gone, move to first available one */
dumper->cur_seq = log_first_seq;
dumper->cur_idx = log_first_idx;
}
/* last entry */
if (dumper->cur_seq >= dumper->next_seq) {
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
goto out;
}
/* calculate length of entire buffer */
seq = dumper->cur_seq;
idx = dumper->cur_idx;
prev = 0;
while (seq < dumper->next_seq) {
struct printk_log *msg = log_from_idx(idx);
l += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
prev = msg->flags;
}
/* move first record forward until length fits into the buffer */
seq = dumper->cur_seq;
idx = dumper->cur_idx;
prev = 0;
while (l > size && seq < dumper->next_seq) {
struct printk_log *msg = log_from_idx(idx);
l -= msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
prev = msg->flags;
}
/* last message in next interation */
next_seq = seq;
next_idx = idx;
l = 0;
while (seq < dumper->next_seq) {
struct printk_log *msg = log_from_idx(idx);
l += msg_print_text(msg, prev, syslog, buf + l, size - l);
idx = log_next(idx);
seq++;
prev = msg->flags;
}
dumper->next_seq = next_seq;
dumper->next_idx = next_idx;
ret = true;
printk: convert byte-buffer to variable-length record buffer - Record-based stream instead of the traditional byte stream buffer. All records carry a 64 bit timestamp, the syslog facility and priority in the record header. - Records consume almost the same amount, sometimes less memory than the traditional byte stream buffer (if printk_time is enabled). The record header is 16 bytes long, plus some padding bytes at the end if needed. The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for the timestamp and a newline. - Buffer management is based on message sequence numbers. When records need to be discarded, the reading heads move on to the next full record. Unlike the byte-stream buffer, no old logged lines get truncated or partly overwritten by new ones. Sequence numbers also allow consumers of the log stream to get notified if any message in the stream they are about to read gets discarded during the time of reading. - Better buffered IO support for KERN_CONT continuation lines, when printk() is called multiple times for a single line. The use of KERN_CONT is now mandatory to use continuation; a few places in the kernel need trivial fixes here. The buffering could possibly be extended to per-cpu variables to allow better thread-safety for multiple printk() invocations for a single line. - Full-featured syslog facility value support. Different facilities can tag their messages. All userspace-injected messages enforce a facility value > 0 now, to be able to reliably distinguish them from the kernel-generated messages. Independent subsystems like a baseband processor running its own firmware, or a kernel-related userspace process can use their own unique facility values. Multiple independent log streams can co-exist that way in the same buffer. All share the same global sequence number counter to ensure proper ordering (and interleaving) and to allow the consumers of the log to reliably correlate the events from different facilities. Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-03 00:29:13 +00:00
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
out:
if (len)
*len = l;
return ret;
}
EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
/**
* kmsg_dump_rewind_nolock - reset the interator (unlocked version)
* @dumper: registered kmsg dumper
*
* Reset the dumper's iterator so that kmsg_dump_get_line() and
* kmsg_dump_get_buffer() can be called again and used multiple
* times within the same dumper.dump() callback.
*
* The function is similar to kmsg_dump_rewind(), but grabs no locks.
*/
void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
{
dumper->cur_seq = clear_seq;
dumper->cur_idx = clear_idx;
dumper->next_seq = log_next_seq;
dumper->next_idx = log_next_idx;
}
/**
* kmsg_dump_rewind - reset the interator
* @dumper: registered kmsg dumper
*
* Reset the dumper's iterator so that kmsg_dump_get_line() and
* kmsg_dump_get_buffer() can be called again and used multiple
* times within the same dumper.dump() callback.
*/
void kmsg_dump_rewind(struct kmsg_dumper *dumper)
{
unsigned long flags;
raw_spin_lock_irqsave(&logbuf_lock, flags);
kmsg_dump_rewind_nolock(dumper);
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
}
EXPORT_SYMBOL_GPL(kmsg_dump_rewind);
dump_stack: consolidate dump_stack() implementations and unify their behaviors Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:27:12 +00:00
dump_stack: implement arch-specific hardware description in task dumps x86 and ia64 can acquire extra hardware identification information from DMI and print it along with task dumps; however, the usage isn't consistent. * x86 show_regs() collects vendor, product and board strings and print them out with PID, comm and utsname. Some of the information is printed again later in the same dump. * warn_slowpath_common() explicitly accesses the DMI board and prints it out with "Hardware name:" label. This applies to both x86 and ia64 but is irrelevant on all other archs. * ia64 doesn't show DMI information on other non-WARN dumps. This patch introduces arch-specific hardware description used by dump_stack(). It can be set by calling dump_stack_set_arch_desc() during boot and, if exists, printed out in a separate line with "Hardware name:" label. dmi_set_dump_stack_arch_desc() is added which sets arch-specific description from DMI data. It uses dmi_ids_string[] which is set from dmi_present() used for DMI debug message. It is superset of the information x86 show_regs() is using. The function is called from x86 and ia64 boot code right after dmi_scan_machine(). This makes the explicit DMI handling in warn_slowpath_common() unnecessary. Removed. show_regs() isn't yet converted to use generic debug information printing and this patch doesn't remove the duplicate DMI handling in x86 show_regs(). The next patch will unify show_regs() handling and remove the duplication. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #3 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f500 ffffffff82228240 0000000000000040 ffffffff8234a08e 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a0c3>] init_workqueues+0x35/0x505 ... v2: Use the same string as the debug message from dmi_present() which also contains BIOS information. Move hardware name into its own line as warn_slowpath_common() did. This change was suggested by Bjorn Helgaas. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:27:15 +00:00
static char dump_stack_arch_desc_str[128];
/**
* dump_stack_set_arch_desc - set arch-specific str to show with task dumps
* @fmt: printf-style format string
* @...: arguments for the format string
*
* The configured string will be printed right after utsname during task
* dumps. Usually used to add arch-specific system identifiers. If an
* arch wants to make use of such an ID string, it should initialize this
* as soon as possible during boot.
*/
void __init dump_stack_set_arch_desc(const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
vsnprintf(dump_stack_arch_desc_str, sizeof(dump_stack_arch_desc_str),
fmt, args);
va_end(args);
}
dump_stack: consolidate dump_stack() implementations and unify their behaviors Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:27:12 +00:00
/**
* dump_stack_print_info - print generic debug info for dump_stack()
* @log_lvl: log level
*
* Arch-specific dump_stack() implementations can use this function to
* print out the same debug information as the generic dump_stack().
*/
void dump_stack_print_info(const char *log_lvl)
{
printk("%sCPU: %d PID: %d Comm: %.20s %s %s %.*s\n",
log_lvl, raw_smp_processor_id(), current->pid, current->comm,
print_tainted(), init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
dump_stack: implement arch-specific hardware description in task dumps x86 and ia64 can acquire extra hardware identification information from DMI and print it along with task dumps; however, the usage isn't consistent. * x86 show_regs() collects vendor, product and board strings and print them out with PID, comm and utsname. Some of the information is printed again later in the same dump. * warn_slowpath_common() explicitly accesses the DMI board and prints it out with "Hardware name:" label. This applies to both x86 and ia64 but is irrelevant on all other archs. * ia64 doesn't show DMI information on other non-WARN dumps. This patch introduces arch-specific hardware description used by dump_stack(). It can be set by calling dump_stack_set_arch_desc() during boot and, if exists, printed out in a separate line with "Hardware name:" label. dmi_set_dump_stack_arch_desc() is added which sets arch-specific description from DMI data. It uses dmi_ids_string[] which is set from dmi_present() used for DMI debug message. It is superset of the information x86 show_regs() is using. The function is called from x86 and ia64 boot code right after dmi_scan_machine(). This makes the explicit DMI handling in warn_slowpath_common() unnecessary. Removed. show_regs() isn't yet converted to use generic debug information printing and this patch doesn't remove the duplicate DMI handling in x86 show_regs(). The next patch will unify show_regs() handling and remove the duplication. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #3 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f500 ffffffff82228240 0000000000000040 ffffffff8234a08e 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a0c3>] init_workqueues+0x35/0x505 ... v2: Use the same string as the debug message from dmi_present() which also contains BIOS information. Move hardware name into its own line as warn_slowpath_common() did. This change was suggested by Bjorn Helgaas. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:27:15 +00:00
if (dump_stack_arch_desc_str[0] != '\0')
printk("%sHardware name: %s\n",
log_lvl, dump_stack_arch_desc_str);
workqueue: include workqueue info when printing debug dump of a worker task One of the problems that arise when converting dedicated custom threadpool to workqueue is that the shared worker pool used by workqueue anonimizes each worker making it more difficult to identify what the worker was doing on which target from the output of sysrq-t or debug dump from oops, BUG() and friends. This patch implements set_worker_desc() which can be called from any workqueue work function to set its description. When the worker task is dumped for whatever reason - sysrq-t, WARN, BUG, oops, lockdep assertion and so on - the description will be printed out together with the workqueue name and the worker function pointer. The printing side is implemented by print_worker_info() which is called from functions in task dump paths - sched_show_task() and dump_stack_print_info(). print_worker_info() can be safely called on any task in any state as long as the task struct itself is accessible. It uses probe_*() functions to access worker fields. It may print garbage if something went very wrong, but it wouldn't cause (another) oops. The description is currently limited to 24bytes including the terminating \0. worker->desc_valid and workder->desc[] are added and the 64 bytes marker which was already incorrect before adding the new fields is moved to the correct position. Here's an example dump with writeback updated to set the bdi name as worker desc. Hardware name: Bochs Modules linked in: Pid: 7, comm: kworker/u9:0 Not tainted 3.9.0-rc1-work+ #1 Workqueue: writeback bdi_writeback_workfn (flush-8:0) ffffffff820a3ab0 ffff88000f6e9cb8 ffffffff81c61845 ffff88000f6e9cf8 ffffffff8108f50f 0000000000000000 0000000000000000 ffff88000cde16b0 ffff88000cde1aa8 ffff88001ee19240 ffff88000f6e9fd8 ffff88000f6e9d08 Call Trace: [<ffffffff81c61845>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81200150>] bdi_writeback_workfn+0x2a0/0x3b0 ... Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:27:22 +00:00
print_worker_info(log_lvl, current);
dump_stack: consolidate dump_stack() implementations and unify their behaviors Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:27:12 +00:00
}
dump_stack: unify debug information printed by show_regs() show_regs() is inherently arch-dependent but it does make sense to print generic debug information and some archs already do albeit in slightly different forms. This patch introduces a generic function to print debug information from show_regs() so that different archs print out the same information and it's much easier to modify what's printed. show_regs_print_info() prints out the same debug info as dump_stack() does plus task and thread_info pointers. * Archs which didn't print debug info now do. alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r, metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc, um, xtensa * Already prints debug info. Replaced with show_regs_print_info(). The printed information is superset of what used to be there. arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86 * s390 is special in that it used to print arch-specific information along with generic debug info. Heiko and Martin think that the arch-specific extra isn't worth keeping s390 specfic implementation. Converted to use the generic version. Note that now all archs print the debug info before actual register dumps. An example BUG() dump follows. kernel BUG at /work/os/work/kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... v2: Typo fix in x86-32. v3: CPU number dropped from show_regs_print_info() as dump_stack_print_info() has been updated to print it. s390 specific implementation dropped as requested by s390 maintainers. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:27:17 +00:00
/**
* show_regs_print_info - print generic debug info for show_regs()
* @log_lvl: log level
*
* show_regs() implementations can use this function to print out generic
* debug information.
*/
void show_regs_print_info(const char *log_lvl)
{
dump_stack_print_info(log_lvl);
printk("%stask: %p ti: %p task.ti: %p\n",
log_lvl, current, current_thread_info(),
task_thread_info(current));
}
#endif