Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-14 16:12:02 +00:00
Code Issues Packages Projects Releases Wiki Activity
4260393e71
linux/sound/soc/codecs/tlv320dac33.c

1422 lines
37 KiB
C
Raw Normal View History

ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/*
* ALSA SoC Texas Instruments TLV320DAC33 codec driver
*
* Author: Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* Copyright: (C) 2009 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
#include <linux/regulator/consumer.h>
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/tlv320dac33-plat.h>
#include "tlv320dac33.h"
#define DAC33_BUFFER_SIZE_BYTES 24576 /* bytes, 12288 16 bit words,
* 6144 stereo */
#define DAC33_BUFFER_SIZE_SAMPLES 6144
#define NSAMPLE_MAX 5700
#define LATENCY_TIME_MS 20
ASoC: tlv320dac33: Change magic numbers used in Mode7 Upper and Lower threshold values are used as magic numbers. Replace them with defines for later use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:59 +00:00
#define MODE7_LTHR 10
#define MODE7_UTHR (DAC33_BUFFER_SIZE_SAMPLES - 10)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
static struct snd_soc_codec *tlv320dac33_codec;
enum dac33_state {
DAC33_IDLE = 0,
DAC33_PREFILL,
DAC33_PLAYBACK,
DAC33_FLUSH,
};
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
enum dac33_fifo_modes {
DAC33_FIFO_BYPASS = 0,
DAC33_FIFO_MODE1,
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
DAC33_FIFO_MODE7,
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
DAC33_FIFO_LAST_MODE,
};
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
#define DAC33_NUM_SUPPLIES 3
static const char *dac33_supply_names[DAC33_NUM_SUPPLIES] = {
"AVDD",
"DVDD",
"IOVDD",
};
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
struct tlv320dac33_priv {
struct mutex mutex;
struct workqueue_struct *dac33_wq;
struct work_struct work;
struct snd_soc_codec codec;
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
struct regulator_bulk_data supplies[DAC33_NUM_SUPPLIES];
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int power_gpio;
int chip_power;
int irq;
unsigned int refclk;
unsigned int alarm_threshold; /* set to be half of LATENCY_TIME_MS */
unsigned int nsample_min; /* nsample should not be lower than
* this */
unsigned int nsample_max; /* nsample should not be higher than
* this */
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
unsigned int nsample; /* burst read amount from host */
ASoC: tlv320dac33: Burst mode BCLK divider configuration Add possibility to configure the burst mode BCLK divider through platform data structure. The BCLK divider changes the actual speed of the serial bus in burst mode, which is faster than the sampling frequency of the running stream. In this way platforms can experiment with the optimal burst speed without the need to modify the codec driver itself. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:36 +00:00
u8 burst_bclkdiv; /* BCLK divider value in burst mode */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Add option for keeping the BCLK running Platform data option for the codec to keep the BCLK clock continuously running in FIFO modes (codec master). OMAP3 McBSP when in slave mode needs continuous BCLK running on the serial bus in order to operate correctly. Since in FIFO mode the DAC33 can also shut down the BCLK clock and enable it only when it is needed, let the platforms decide if the CPU side needs the BCLK running or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:22 +00:00
int keep_bclk; /* Keep the BCLK continuously running
* in FIFO modes */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
enum dac33_state state;
};
static const u8 dac33_reg[DAC33_CACHEREGNUM] = {
0x00, 0x00, 0x00, 0x00, /* 0x00 - 0x03 */
0x00, 0x00, 0x00, 0x00, /* 0x04 - 0x07 */
0x00, 0x00, 0x00, 0x00, /* 0x08 - 0x0b */
0x00, 0x00, 0x00, 0x00, /* 0x0c - 0x0f */
0x00, 0x00, 0x00, 0x00, /* 0x10 - 0x13 */
0x00, 0x00, 0x00, 0x00, /* 0x14 - 0x17 */
0x00, 0x00, 0x00, 0x00, /* 0x18 - 0x1b */
0x00, 0x00, 0x00, 0x00, /* 0x1c - 0x1f */
0x00, 0x00, 0x00, 0x00, /* 0x20 - 0x23 */
0x00, 0x00, 0x00, 0x00, /* 0x24 - 0x27 */
0x00, 0x00, 0x00, 0x00, /* 0x28 - 0x2b */
0x00, 0x00, 0x00, 0x80, /* 0x2c - 0x2f */
0x80, 0x00, 0x00, 0x00, /* 0x30 - 0x33 */
0x00, 0x00, 0x00, 0x00, /* 0x34 - 0x37 */
0x00, 0x00, /* 0x38 - 0x39 */
/* Registers 0x3a - 0x3f are reserved */
0x00, 0x00, /* 0x3a - 0x3b */
0x00, 0x00, 0x00, 0x00, /* 0x3c - 0x3f */
0x00, 0x00, 0x00, 0x00, /* 0x40 - 0x43 */
0x00, 0x80, /* 0x44 - 0x45 */
/* Registers 0x46 - 0x47 are reserved */
0x80, 0x80, /* 0x46 - 0x47 */
0x80, 0x00, 0x00, /* 0x48 - 0x4a */
/* Registers 0x4b - 0x7c are reserved */
0x00, /* 0x4b */
0x00, 0x00, 0x00, 0x00, /* 0x4c - 0x4f */
0x00, 0x00, 0x00, 0x00, /* 0x50 - 0x53 */
0x00, 0x00, 0x00, 0x00, /* 0x54 - 0x57 */
0x00, 0x00, 0x00, 0x00, /* 0x58 - 0x5b */
0x00, 0x00, 0x00, 0x00, /* 0x5c - 0x5f */
0x00, 0x00, 0x00, 0x00, /* 0x60 - 0x63 */
0x00, 0x00, 0x00, 0x00, /* 0x64 - 0x67 */
0x00, 0x00, 0x00, 0x00, /* 0x68 - 0x6b */
0x00, 0x00, 0x00, 0x00, /* 0x6c - 0x6f */
0x00, 0x00, 0x00, 0x00, /* 0x70 - 0x73 */
0x00, 0x00, 0x00, 0x00, /* 0x74 - 0x77 */
0x00, 0x00, 0x00, 0x00, /* 0x78 - 0x7b */
0x00, /* 0x7c */
0xda, 0x33, 0x03, /* 0x7d - 0x7f */
};
/* Register read and write */
static inline unsigned int dac33_read_reg_cache(struct snd_soc_codec *codec,
unsigned reg)
{
u8 *cache = codec->reg_cache;
if (reg >= DAC33_CACHEREGNUM)
return 0;
return cache[reg];
}
static inline void dac33_write_reg_cache(struct snd_soc_codec *codec,
u8 reg, u8 value)
{
u8 *cache = codec->reg_cache;
if (reg >= DAC33_CACHEREGNUM)
return;
cache[reg] = value;
}
static int dac33_read(struct snd_soc_codec *codec, unsigned int reg,
u8 *value)
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int val;
*value = reg & 0xff;
/* If powered off, return the cached value */
if (dac33->chip_power) {
val = i2c_smbus_read_byte_data(codec->control_data, value[0]);
if (val < 0) {
dev_err(codec->dev, "Read failed (%d)\n", val);
value[0] = dac33_read_reg_cache(codec, reg);
} else {
value[0] = val;
dac33_write_reg_cache(codec, reg, val);
}
} else {
value[0] = dac33_read_reg_cache(codec, reg);
}
return 0;
}
static int dac33_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 data[2];
int ret = 0;
/*
* data is
* D15..D8 dac33 register offset
* D7...D0 register data
*/
data[0] = reg & 0xff;
data[1] = value & 0xff;
dac33_write_reg_cache(codec, data[0], data[1]);
if (dac33->chip_power) {
ret = codec->hw_write(codec->control_data, data, 2);
if (ret != 2)
dev_err(codec->dev, "Write failed (%d)\n", ret);
else
ret = 0;
}
return ret;
}
static int dac33_write_locked(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int ret;
mutex_lock(&dac33->mutex);
ret = dac33_write(codec, reg, value);
mutex_unlock(&dac33->mutex);
return ret;
}
#define DAC33_I2C_ADDR_AUTOINC 0x80
static int dac33_write16(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 data[3];
int ret = 0;
/*
* data is
* D23..D16 dac33 register offset
* D15..D8 register data MSB
* D7...D0 register data LSB
*/
data[0] = reg & 0xff;
data[1] = (value >> 8) & 0xff;
data[2] = value & 0xff;
dac33_write_reg_cache(codec, data[0], data[1]);
dac33_write_reg_cache(codec, data[0] + 1, data[2]);
if (dac33->chip_power) {
/* We need to set autoincrement mode for 16 bit writes */
data[0] |= DAC33_I2C_ADDR_AUTOINC;
ret = codec->hw_write(codec->control_data, data, 3);
if (ret != 3)
dev_err(codec->dev, "Write failed (%d)\n", ret);
else
ret = 0;
}
return ret;
}
static void dac33_restore_regs(struct snd_soc_codec *codec)
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 *cache = codec->reg_cache;
u8 data[2];
int i, ret;
if (!dac33->chip_power)
return;
for (i = DAC33_PWR_CTRL; i <= DAC33_INTP_CTRL_B; i++) {
data[0] = i;
data[1] = cache[i];
/* Skip the read only registers */
if ((i >= DAC33_INT_OSC_STATUS &&
i <= DAC33_INT_OSC_FREQ_RAT_READ_B) ||
(i >= DAC33_FIFO_WPTR_MSB && i <= DAC33_FIFO_IRQ_FLAG) ||
i == DAC33_DAC_STATUS_FLAGS ||
i == DAC33_SRC_EST_REF_CLK_RATIO_A ||
i == DAC33_SRC_EST_REF_CLK_RATIO_B)
continue;
ret = codec->hw_write(codec->control_data, data, 2);
if (ret != 2)
dev_err(codec->dev, "Write failed (%d)\n", ret);
}
for (i = DAC33_LDAC_PWR_CTRL; i <= DAC33_LINEL_TO_LLO_VOL; i++) {
data[0] = i;
data[1] = cache[i];
ret = codec->hw_write(codec->control_data, data, 2);
if (ret != 2)
dev_err(codec->dev, "Write failed (%d)\n", ret);
}
for (i = DAC33_LINER_TO_RLO_VOL; i <= DAC33_OSC_TRIM; i++) {
data[0] = i;
data[1] = cache[i];
ret = codec->hw_write(codec->control_data, data, 2);
if (ret != 2)
dev_err(codec->dev, "Write failed (%d)\n", ret);
}
}
static inline void dac33_soft_power(struct snd_soc_codec *codec, int power)
{
u8 reg;
reg = dac33_read_reg_cache(codec, DAC33_PWR_CTRL);
if (power)
reg |= DAC33_PDNALLB;
else
ASoC: tlv320dac33: Start/stop sequence change To avoid race condition especially in FIFO modes the sequence for enabling and disabling the codec need to be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:21 +00:00
reg &= ~(DAC33_PDNALLB | DAC33_OSCPDNB |
DAC33_DACRPDNB | DAC33_DACLPDNB);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_write(codec, DAC33_PWR_CTRL, reg);
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
static int dac33_hard_power(struct snd_soc_codec *codec, int power)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
int ret;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
mutex_lock(&dac33->mutex);
if (power) {
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
ret = regulator_bulk_enable(ARRAY_SIZE(dac33->supplies),
dac33->supplies);
if (ret != 0) {
dev_err(codec->dev,
"Failed to enable supplies: %d\n", ret);
goto exit;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
if (dac33->power_gpio >= 0)
gpio_set_value(dac33->power_gpio, 1);
dac33->chip_power = 1;
/* Restore registers */
dac33_restore_regs(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_soft_power(codec, 1);
} else {
dac33_soft_power(codec, 0);
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
if (dac33->power_gpio >= 0)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
gpio_set_value(dac33->power_gpio, 0);
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
ret = regulator_bulk_disable(ARRAY_SIZE(dac33->supplies),
dac33->supplies);
if (ret != 0) {
dev_err(codec->dev,
"Failed to disable supplies: %d\n", ret);
goto exit;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
dac33->chip_power = 0;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
exit:
mutex_unlock(&dac33->mutex);
return ret;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
static int dac33_get_nsample(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ucontrol->value.integer.value[0] = dac33->nsample;
return 0;
}
static int dac33_set_nsample(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int ret = 0;
if (dac33->nsample == ucontrol->value.integer.value[0])
return 0;
if (ucontrol->value.integer.value[0] < dac33->nsample_min ||
ucontrol->value.integer.value[0] > dac33->nsample_max)
ret = -EINVAL;
else
dac33->nsample = ucontrol->value.integer.value[0];
return ret;
}
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
static int dac33_get_fifo_mode(struct snd_kcontrol *kcontrol,
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
ucontrol->value.integer.value[0] = dac33->fifo_mode;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return 0;
}
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
static int dac33_set_fifo_mode(struct snd_kcontrol *kcontrol,
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int ret = 0;
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
if (dac33->fifo_mode == ucontrol->value.integer.value[0])
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return 0;
/* Do not allow changes while stream is running*/
if (codec->active)
return -EPERM;
if (ucontrol->value.integer.value[0] < 0 ||
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
ucontrol->value.integer.value[0] >= DAC33_FIFO_LAST_MODE)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ret = -EINVAL;
else
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
dac33->fifo_mode = ucontrol->value.integer.value[0];
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return ret;
}
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
/* Codec operation modes */
static const char *dac33_fifo_mode_texts[] = {
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
"Bypass", "Mode 1", "Mode 7"
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
};
static const struct soc_enum dac33_fifo_mode_enum =
SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(dac33_fifo_mode_texts),
dac33_fifo_mode_texts);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/*
* DACL/R digital volume control:
* from 0 dB to -63.5 in 0.5 dB steps
* Need to be inverted later on:
* 0x00 == 0 dB
* 0x7f == -63.5 dB
*/
static DECLARE_TLV_DB_SCALE(dac_digivol_tlv, -6350, 50, 0);
static const struct snd_kcontrol_new dac33_snd_controls[] = {
SOC_DOUBLE_R_TLV("DAC Digital Playback Volume",
DAC33_LDAC_DIG_VOL_CTRL, DAC33_RDAC_DIG_VOL_CTRL,
0, 0x7f, 1, dac_digivol_tlv),
SOC_DOUBLE_R("DAC Digital Playback Switch",
DAC33_LDAC_DIG_VOL_CTRL, DAC33_RDAC_DIG_VOL_CTRL, 7, 1, 1),
SOC_DOUBLE_R("Line to Line Out Volume",
DAC33_LINEL_TO_LLO_VOL, DAC33_LINER_TO_RLO_VOL, 0, 127, 1),
};
static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = {
SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
dac33_get_nsample, dac33_set_nsample),
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum,
dac33_get_fifo_mode, dac33_set_fifo_mode),
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
};
/* Analog bypass */
static const struct snd_kcontrol_new dac33_dapm_abypassl_control =
SOC_DAPM_SINGLE("Switch", DAC33_LINEL_TO_LLO_VOL, 7, 1, 1);
static const struct snd_kcontrol_new dac33_dapm_abypassr_control =
SOC_DAPM_SINGLE("Switch", DAC33_LINER_TO_RLO_VOL, 7, 1, 1);
static const struct snd_soc_dapm_widget dac33_dapm_widgets[] = {
SND_SOC_DAPM_OUTPUT("LEFT_LO"),
SND_SOC_DAPM_OUTPUT("RIGHT_LO"),
SND_SOC_DAPM_INPUT("LINEL"),
SND_SOC_DAPM_INPUT("LINER"),
SND_SOC_DAPM_DAC("DACL", "Left Playback", DAC33_LDAC_PWR_CTRL, 2, 0),
SND_SOC_DAPM_DAC("DACR", "Right Playback", DAC33_RDAC_PWR_CTRL, 2, 0),
/* Analog bypass */
SND_SOC_DAPM_SWITCH("Analog Left Bypass", SND_SOC_NOPM, 0, 0,
&dac33_dapm_abypassl_control),
SND_SOC_DAPM_SWITCH("Analog Right Bypass", SND_SOC_NOPM, 0, 0,
&dac33_dapm_abypassr_control),
SND_SOC_DAPM_REG(snd_soc_dapm_mixer, "Output Left Amp Power",
DAC33_OUT_AMP_PWR_CTRL, 6, 3, 3, 0),
SND_SOC_DAPM_REG(snd_soc_dapm_mixer, "Output Right Amp Power",
DAC33_OUT_AMP_PWR_CTRL, 4, 3, 3, 0),
};
static const struct snd_soc_dapm_route audio_map[] = {
/* Analog bypass */
{"Analog Left Bypass", "Switch", "LINEL"},
{"Analog Right Bypass", "Switch", "LINER"},
{"Output Left Amp Power", NULL, "DACL"},
{"Output Right Amp Power", NULL, "DACR"},
{"Output Left Amp Power", NULL, "Analog Left Bypass"},
{"Output Right Amp Power", NULL, "Analog Right Bypass"},
/* output */
{"LEFT_LO", NULL, "Output Left Amp Power"},
{"RIGHT_LO", NULL, "Output Right Amp Power"},
};
static int dac33_add_widgets(struct snd_soc_codec *codec)
{
snd_soc_dapm_new_controls(codec, dac33_dapm_widgets,
ARRAY_SIZE(dac33_dapm_widgets));
/* set up audio path interconnects */
snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
return 0;
}
static int dac33_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
int ret;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
switch (level) {
case SND_SOC_BIAS_ON:
dac33_soft_power(codec, 1);
break;
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
if (codec->bias_level == SND_SOC_BIAS_OFF) {
ret = dac33_hard_power(codec, 1);
if (ret != 0)
return ret;
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_soft_power(codec, 0);
break;
case SND_SOC_BIAS_OFF:
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
ret = dac33_hard_power(codec, 0);
if (ret != 0)
return ret;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
}
codec->bias_level = level;
return 0;
}
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
{
struct snd_soc_codec *codec;
codec = &dac33->codec;
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
dac33_write16(codec, DAC33_NSAMPLE_MSB,
ASoC: tlv320dac33: Fix for early interrupt in FIFO Mode1 Alarm threshold interrupt is triggered right after the playback start. This interrupt is recieved during the first burst period, and caused the state machine to write additional nSample command, which has to be avoided. To fix this issue move the DAC33 interrupt unmasking after we configured the PREFILL register with a small delay. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:57 +00:00
DAC33_THRREG(dac33->nsample + dac33->alarm_threshold));
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
dac33_write16(codec, DAC33_PREFILL_MSB,
DAC33_THRREG(dac33->alarm_threshold));
ASoC: tlv320dac33: Fix for early interrupt in FIFO Mode1 Alarm threshold interrupt is triggered right after the playback start. This interrupt is recieved during the first burst period, and caused the state machine to write additional nSample command, which has to be avoided. To fix this issue move the DAC33 interrupt unmasking after we configured the PREFILL register with a small delay. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:57 +00:00
/* Enable Alarm Threshold IRQ with a delay */
udelay(SAMPLES_TO_US(dac33->burst_rate,
dac33->alarm_threshold));
dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MAT);
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
dac33_write16(codec, DAC33_PREFILL_MSB,
ASoC: tlv320dac33: Change magic numbers used in Mode7 Upper and Lower threshold values are used as magic numbers. Replace them with defines for later use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:59 +00:00
DAC33_THRREG(MODE7_LTHR));
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
break;
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
default:
dev_warn(codec->dev, "Unhandled FIFO mode: %d\n",
dac33->fifo_mode);
break;
}
}
static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33)
{
struct snd_soc_codec *codec;
codec = &dac33->codec;
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
dac33_write16(codec, DAC33_NSAMPLE_MSB,
DAC33_THRREG(dac33->nsample));
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
/* At the moment we are not using interrupts in mode7 */
break;
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
default:
dev_warn(codec->dev, "Unhandled FIFO mode: %d\n",
dac33->fifo_mode);
break;
}
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
static void dac33_work(struct work_struct *work)
{
struct snd_soc_codec *codec;
struct tlv320dac33_priv *dac33;
u8 reg;
dac33 = container_of(work, struct tlv320dac33_priv, work);
codec = &dac33->codec;
mutex_lock(&dac33->mutex);
switch (dac33->state) {
case DAC33_PREFILL:
dac33->state = DAC33_PLAYBACK;
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
dac33_prefill_handler(dac33);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
case DAC33_PLAYBACK:
ASoC: tlv320dac33: Introduce prefill and playback state handlers Ensure that the code is going to be readable, when new FIFO modes are introduced later. Move the prefill and playback state handling to inlined functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:20 +00:00
dac33_playback_handler(dac33);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
case DAC33_IDLE:
break;
case DAC33_FLUSH:
dac33->state = DAC33_IDLE;
/* Mask all interrupts from dac33 */
dac33_write(codec, DAC33_FIFO_IRQ_MASK, 0);
/* flush fifo */
reg = dac33_read_reg_cache(codec, DAC33_FIFO_CTRL_A);
reg |= DAC33_FIFOFLUSH;
dac33_write(codec, DAC33_FIFO_CTRL_A, reg);
break;
}
mutex_unlock(&dac33->mutex);
}
static irqreturn_t dac33_interrupt_handler(int irq, void *dev)
{
struct snd_soc_codec *codec = dev;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
queue_work(dac33->dac33_wq, &dac33->work);
return IRQ_HANDLED;
}
static void dac33_oscwait(struct snd_soc_codec *codec)
{
int timeout = 20;
u8 reg;
do {
msleep(1);
dac33_read(codec, DAC33_INT_OSC_STATUS, &reg);
} while (((reg & 0x03) != DAC33_OSCSTATUS_NORMAL) && timeout--);
if ((reg & 0x03) != DAC33_OSCSTATUS_NORMAL)
dev_err(codec->dev,
"internal oscillator calibration failed\n");
}
static int dac33_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
/* Check parameters for validity */
switch (params_rate(params)) {
case 44100:
case 48000:
break;
default:
dev_err(codec->dev, "unsupported rate %d\n",
params_rate(params));
return -EINVAL;
}
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
break;
default:
dev_err(codec->dev, "unsupported format %d\n",
params_format(params));
return -EINVAL;
}
return 0;
}
#define CALC_OSCSET(rate, refclk) ( \
ASoC: tlv320dac33: Correct the OSCSET calculation OSCSET calculation was not correct in case of 44.1KHz sampling rate. With small adjustment both 48 and 44.1 KHz calculation now gives the correct value. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-16 11:23:16 +00:00
((((rate * 10000) / refclk) * 4096) + 7000) / 10000)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
#define CALC_RATIOSET(rate, refclk) ( \
((((refclk * 100000) / rate) * 16384) + 50000) / 100000)
/*
* tlv320dac33 is strict on the sequence of the register writes, if the register
* writes happens in different order, than dac33 might end up in unknown state.
* Use the known, working sequence of register writes to initialize the dac33.
*/
static int dac33_prepare_chip(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
unsigned int oscset, ratioset, pwr_ctrl, reg_tmp;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
u8 aictrl_a, aictrl_b, fifoctrl_a;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
switch (substream->runtime->rate) {
case 44100:
case 48000:
oscset = CALC_OSCSET(substream->runtime->rate, dac33->refclk);
ratioset = CALC_RATIOSET(substream->runtime->rate,
dac33->refclk);
break;
default:
dev_err(codec->dev, "unsupported rate %d\n",
substream->runtime->rate);
return -EINVAL;
}
aictrl_a = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A);
aictrl_a &= ~(DAC33_NCYCL_MASK | DAC33_WLEN_MASK);
ASoC: tlv320dac33: Clearing FIFOFLUSH flag before playback In repeated playback the FIFOFLUSH bit remained set, and never has been cleared. Clear it during the setup phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-16 11:23:15 +00:00
/* Read FIFO control A, and clear FIFO flush bit */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
fifoctrl_a = dac33_read_reg_cache(codec, DAC33_FIFO_CTRL_A);
ASoC: tlv320dac33: Clearing FIFOFLUSH flag before playback In repeated playback the FIFOFLUSH bit remained set, and never has been cleared. Clear it during the setup phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-16 11:23:15 +00:00
fifoctrl_a &= ~DAC33_FIFOFLUSH;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
fifoctrl_a &= ~DAC33_WIDTH;
switch (substream->runtime->format) {
case SNDRV_PCM_FORMAT_S16_LE:
aictrl_a |= (DAC33_NCYCL_16 | DAC33_WLEN_16);
fifoctrl_a |= DAC33_WIDTH;
break;
default:
dev_err(codec->dev, "unsupported format %d\n",
substream->runtime->format);
return -EINVAL;
}
mutex_lock(&dac33->mutex);
ASoC: tlv320dac33: Start/stop sequence change To avoid race condition especially in FIFO modes the sequence for enabling and disabling the codec need to be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:21 +00:00
dac33_soft_power(codec, 0);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_soft_power(codec, 1);
reg_tmp = dac33_read_reg_cache(codec, DAC33_INT_OSC_CTRL);
dac33_write(codec, DAC33_INT_OSC_CTRL, reg_tmp);
/* Write registers 0x08 and 0x09 (MSB, LSB) */
dac33_write16(codec, DAC33_INT_OSC_FREQ_RAT_A, oscset);
/* calib time: 128 is a nice number ;) */
dac33_write(codec, DAC33_CALIB_TIME, 128);
/* adjustment treshold & step */
dac33_write(codec, DAC33_INT_OSC_CTRL_B, DAC33_ADJTHRSHLD(2) |
DAC33_ADJSTEP(1));
/* div=4 / gain=1 / div */
dac33_write(codec, DAC33_INT_OSC_CTRL_C, DAC33_REFDIV(4));
pwr_ctrl = dac33_read_reg_cache(codec, DAC33_PWR_CTRL);
pwr_ctrl |= DAC33_OSCPDNB | DAC33_DACRPDNB | DAC33_DACLPDNB;
dac33_write(codec, DAC33_PWR_CTRL, pwr_ctrl);
dac33_oscwait(codec);
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
if (dac33->fifo_mode) {
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
/* Generic for all FIFO modes */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* 50-51 : ASRC Control registers */
ASoC: tlv320dac33: Internal clocking changes During validation of the internal clocking setup it has been found that the following settings were not configured in an optimal way: ASRC_CTRL_A: SRCLKDIV was incorrect, instad of divide ratio 3, ratio of 2 has to be used (as the comment stated) DAC_CTRL_A: Fs = Fsref is the desired configuration instead of Fs = Fsref / 1.5 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 09:10:20 +00:00
dac33_write(codec, DAC33_ASRC_CTRL_A, DAC33_SRCLKDIV(1));
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_write(codec, DAC33_ASRC_CTRL_B, 1); /* ??? */
/* Write registers 0x34 and 0x35 (MSB, LSB) */
dac33_write16(codec, DAC33_SRC_REF_CLK_RATIO_A, ratioset);
/* Set interrupts to high active */
dac33_write(codec, DAC33_INTP_CTRL_A, DAC33_INTPM_AHIGH);
} else {
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
/* FIFO bypass mode */
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* 50-51 : ASRC Control registers */
dac33_write(codec, DAC33_ASRC_CTRL_A, DAC33_SRCBYP);
dac33_write(codec, DAC33_ASRC_CTRL_B, 0); /* ??? */
}
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
/* Interrupt behaviour configuration */
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
dac33_write(codec, DAC33_FIFO_IRQ_MODE_B,
DAC33_ATM(DAC33_FIFO_IRQ_MODE_LEVEL));
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
/* Disable all interrupts */
dac33_write(codec, DAC33_FIFO_IRQ_MASK, 0);
break;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
default:
/* in FIFO bypass mode, the interrupts are not used */
break;
}
aictrl_b = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B);
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
/*
* For mode1:
* Disable the FIFO bypass (Enable the use of FIFO)
* Select nSample mode
* BCLK is only running when data is needed by DAC33
*/
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
fifoctrl_a &= ~DAC33_FBYPAS;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
fifoctrl_a &= ~DAC33_FAUTO;
ASoC: tlv320dac33: Add option for keeping the BCLK running Platform data option for the codec to keep the BCLK clock continuously running in FIFO modes (codec master). OMAP3 McBSP when in slave mode needs continuous BCLK running on the serial bus in order to operate correctly. Since in FIFO mode the DAC33 can also shut down the BCLK clock and enable it only when it is needed, let the platforms decide if the CPU side needs the BCLK running or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:22 +00:00
if (dac33->keep_bclk)
aictrl_b |= DAC33_BCLKON;
else
aictrl_b &= ~DAC33_BCLKON;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
/*
* For mode1:
* Disable the FIFO bypass (Enable the use of FIFO)
* Select Threshold mode
* BCLK is only running when data is needed by DAC33
*/
fifoctrl_a &= ~DAC33_FBYPAS;
fifoctrl_a |= DAC33_FAUTO;
ASoC: tlv320dac33: Add option for keeping the BCLK running Platform data option for the codec to keep the BCLK clock continuously running in FIFO modes (codec master). OMAP3 McBSP when in slave mode needs continuous BCLK running on the serial bus in order to operate correctly. Since in FIFO mode the DAC33 can also shut down the BCLK clock and enable it only when it is needed, let the platforms decide if the CPU side needs the BCLK running or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:22 +00:00
if (dac33->keep_bclk)
aictrl_b |= DAC33_BCLKON;
else
aictrl_b &= ~DAC33_BCLKON;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
break;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
default:
/*
* For FIFO bypass mode:
* Enable the FIFO bypass (Disable the FIFO use)
* Set the BCLK as continous
*/
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
fifoctrl_a |= DAC33_FBYPAS;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
aictrl_b |= DAC33_BCLKON;
break;
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
dac33_write(codec, DAC33_FIFO_CTRL_A, fifoctrl_a);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_A, aictrl_a);
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_B, aictrl_b);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: Burst mode BCLK divider configuration Add possibility to configure the burst mode BCLK divider through platform data structure. The BCLK divider changes the actual speed of the serial bus in burst mode, which is faster than the sampling frequency of the running stream. In this way platforms can experiment with the optimal burst speed without the need to modify the codec driver itself. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:36 +00:00
/*
* BCLK divide ratio
* 0: 1.5
* 1: 1
* 2: 2
* ...
* 254: 254
* 255: 255
*/
ASoC: tlv320dac33: BCLK divider fix The BCLK divider was not configured in case of mode7. This leads to unpredictable behavior when switching between FIFO modes. Configure the BCLK divider depending on the fifo_mode (FIFO is in use, or FIFO bypass). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:35 +00:00
if (dac33->fifo_mode)
ASoC: tlv320dac33: Burst mode BCLK divider configuration Add possibility to configure the burst mode BCLK divider through platform data structure. The BCLK divider changes the actual speed of the serial bus in burst mode, which is faster than the sampling frequency of the running stream. In this way platforms can experiment with the optimal burst speed without the need to modify the codec driver itself. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:36 +00:00
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C,
dac33->burst_bclkdiv);
ASoC: tlv320dac33: BCLK divider fix The BCLK divider was not configured in case of mode7. This leads to unpredictable behavior when switching between FIFO modes. Configure the BCLK divider depending on the fifo_mode (FIFO is in use, or FIFO bypass). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:35 +00:00
else
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C, 32);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ASoC: tlv320dac33: BCLK divider fix The BCLK divider was not configured in case of mode7. This leads to unpredictable behavior when switching between FIFO modes. Configure the BCLK divider depending on the fifo_mode (FIFO is in use, or FIFO bypass). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:35 +00:00
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33_write16(codec, DAC33_ATHR_MSB,
DAC33_THRREG(dac33->alarm_threshold));
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
break;
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
case DAC33_FIFO_MODE7:
/*
* Configure the threshold levels, and leave 10 sample space
* at the bottom, and also at the top of the FIFO
*/
ASoC: tlv320dac33: Change magic numbers used in Mode7 Upper and Lower threshold values are used as magic numbers. Replace them with defines for later use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:59 +00:00
dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(MODE7_UTHR));
dac33_write16(codec, DAC33_LTHR_MSB, DAC33_THRREG(MODE7_LTHR));
ASoC: tlv320dac33: Add new FIFO mode: mode 7 Mode 7 of tlv320dac33 operates in the following way: The codec is in master mode. Host configures upper and lower thresholds in tlv320dac33 During playback the codec will clock in the data until the upper threshold is reached in FIFO. At this point the codec stops the colocks on the serial bus. When the FIFO fill is reaching the lower threshold limit the codec will enable the clocks on the serial bus, and clocks in data till the upper threshold is reached. In this mode, we can also request interrupts for threshold events (upper, lower and alarm), which could be used for power management. At this point the interrupts are not enabled for this mode, but it can be taken into use in the future, when the surrounding code makes it possible to use it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.oc.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:22 +00:00
break;
ASoC: tlv320dac33: Clean up the hardware configuration code Use switch instead of if statements to configure FIFO bypass and mode1. With this change adding new FIFO mode is going to be easier, and cleaner. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:21 +00:00
default:
break;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
}
mutex_unlock(&dac33->mutex);
return 0;
}
static void dac33_calculate_times(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
unsigned int nsample_limit;
ASoC: tlv320dac33: Skip calculations in FIFO Bypass mode There is no need for calculations for FIFO bypass mode. Just in case set the nsample maximum limit, which has been done in the calculation phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:58 +00:00
/* In bypass mode we don't need to calculate */
if (!dac33->fifo_mode)
return;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* Number of samples (16bit, stereo) in one period */
dac33->nsample_min = snd_pcm_lib_period_bytes(substream) / 4;
/* Number of samples (16bit, stereo) in ALSA buffer */
dac33->nsample_max = snd_pcm_lib_buffer_bytes(substream) / 4;
/* Subtract one period from the total */
dac33->nsample_max -= dac33->nsample_min;
/* Number of samples for LATENCY_TIME_MS / 2 */
dac33->alarm_threshold = substream->runtime->rate /
(1000 / (LATENCY_TIME_MS / 2));
/* Find and fix up the lowest nsmaple limit */
nsample_limit = substream->runtime->rate / (1000 / LATENCY_TIME_MS);
if (dac33->nsample_min < nsample_limit)
dac33->nsample_min = nsample_limit;
if (dac33->nsample < dac33->nsample_min)
dac33->nsample = dac33->nsample_min;
/*
* Find and fix up the highest nsmaple limit
* In order to not overflow the DAC33 buffer substract the
* alarm_threshold value from the size of the DAC33 buffer
*/
nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - dac33->alarm_threshold;
if (dac33->nsample_max > nsample_limit)
dac33->nsample_max = nsample_limit;
if (dac33->nsample > dac33->nsample_max)
dac33->nsample = dac33->nsample_max;
}
static int dac33_pcm_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
dac33_calculate_times(substream);
dac33_prepare_chip(substream);
return 0;
}
static int dac33_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
int ret = 0;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
if (dac33->fifo_mode) {
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33->state = DAC33_PREFILL;
queue_work(dac33->dac33_wq, &dac33->work);
}
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
if (dac33->fifo_mode) {
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33->state = DAC33_FLUSH;
queue_work(dac33->dac33_wq, &dac33->work);
}
break;
default:
ret = -EINVAL;
}
return ret;
}
static int dac33_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 ioc_reg, asrcb_reg;
ioc_reg = dac33_read_reg_cache(codec, DAC33_INT_OSC_CTRL);
asrcb_reg = dac33_read_reg_cache(codec, DAC33_ASRC_CTRL_B);
switch (clk_id) {
case TLV320DAC33_MCLK:
ioc_reg |= DAC33_REFSEL;
asrcb_reg |= DAC33_SRCREFSEL;
break;
case TLV320DAC33_SLEEPCLK:
ioc_reg &= ~DAC33_REFSEL;
asrcb_reg &= ~DAC33_SRCREFSEL;
break;
default:
dev_err(codec->dev, "Invalid clock ID (%d)\n", clk_id);
break;
}
dac33->refclk = freq;
dac33_write_reg_cache(codec, DAC33_INT_OSC_CTRL, ioc_reg);
dac33_write_reg_cache(codec, DAC33_ASRC_CTRL_B, asrcb_reg);
return 0;
}
static int dac33_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
u8 aictrl_a, aictrl_b;
aictrl_a = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A);
aictrl_b = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B);
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
/* Codec Master */
aictrl_a |= (DAC33_MSBCLK | DAC33_MSWCLK);
break;
case SND_SOC_DAIFMT_CBS_CFS:
/* Codec Slave */
ASoC: tlv320dac33: Safety check for codec slave mode The currently available FIFO modes (mode1 and mode7) require master mode from the codec. Do not allow the slave configuration when the FIFO is in use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:23 +00:00
if (dac33->fifo_mode) {
dev_err(codec->dev, "FIFO mode requires master mode\n");
return -EINVAL;
} else
aictrl_a &= ~(DAC33_MSBCLK | DAC33_MSWCLK);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
default:
return -EINVAL;
}
aictrl_a &= ~DAC33_AFMT_MASK;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
aictrl_a |= DAC33_AFMT_I2S;
break;
case SND_SOC_DAIFMT_DSP_A:
aictrl_a |= DAC33_AFMT_DSP;
aictrl_b &= ~DAC33_DATA_DELAY_MASK;
ASoC: tlv320dac33: Fix DSP modes To make DSP_A mode working correctly the data delay should be configured to 0. DSP_B mode thus can not be used with DAC33, so remove it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 09:10:19 +00:00
aictrl_b |= DAC33_DATA_DELAY(0);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
break;
case SND_SOC_DAIFMT_RIGHT_J:
aictrl_a |= DAC33_AFMT_RIGHT_J;
break;
case SND_SOC_DAIFMT_LEFT_J:
aictrl_a |= DAC33_AFMT_LEFT_J;
break;
default:
dev_err(codec->dev, "Unsupported format (%u)\n",
fmt & SND_SOC_DAIFMT_FORMAT_MASK);
return -EINVAL;
}
dac33_write_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A, aictrl_a);
dac33_write_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B, aictrl_b);
return 0;
}
static void dac33_init_chip(struct snd_soc_codec *codec)
{
/* 44-46: DAC Control Registers */
/* A : DAC sample rate Fsref/1.5 */
ASoC: tlv320dac33: Internal clocking changes During validation of the internal clocking setup it has been found that the following settings were not configured in an optimal way: ASRC_CTRL_A: SRCLKDIV was incorrect, instad of divide ratio 3, ratio of 2 has to be used (as the comment stated) DAC_CTRL_A: Fs = Fsref is the desired configuration instead of Fs = Fsref / 1.5 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 09:10:20 +00:00
dac33_write(codec, DAC33_DAC_CTRL_A, DAC33_DACRATE(0));
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* B : DAC src=normal, not muted */
dac33_write(codec, DAC33_DAC_CTRL_B, DAC33_DACSRCR_RIGHT |
DAC33_DACSRCL_LEFT);
/* C : (defaults) */
dac33_write(codec, DAC33_DAC_CTRL_C, 0x00);
/* 64-65 : L&R DAC power control
Line In -> OUT 1V/V Gain, DAC -> OUT 4V/V Gain*/
dac33_write(codec, DAC33_LDAC_PWR_CTRL, DAC33_LROUT_GAIN(2));
dac33_write(codec, DAC33_RDAC_PWR_CTRL, DAC33_LROUT_GAIN(2));
/* 73 : volume soft stepping control,
clock source = internal osc (?) */
dac33_write(codec, DAC33_ANA_VOL_SOFT_STEP_CTRL, DAC33_VOLCLKEN);
/* 66 : LOP/LOM Modes */
dac33_write(codec, DAC33_OUT_AMP_CM_CTRL, 0xff);
/* 68 : LOM inverted from LOP */
dac33_write(codec, DAC33_OUT_AMP_CTRL, (3<<2));
dac33_write(codec, DAC33_PWR_CTRL, DAC33_PDNALLB);
}
static int dac33_soc_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec;
struct tlv320dac33_priv *dac33;
int ret = 0;
BUG_ON(!tlv320dac33_codec);
codec = tlv320dac33_codec;
socdev->card->codec = codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
dac33 = snd_soc_codec_get_drvdata(codec);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* Power up the codec */
dac33_hard_power(codec, 1);
/* Set default configuration */
dac33_init_chip(codec);
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
dev_err(codec->dev, "failed to create pcms\n");
goto pcm_err;
}
snd_soc_add_controls(codec, dac33_snd_controls,
ARRAY_SIZE(dac33_snd_controls));
/* Only add the nSample controls, if we have valid IRQ number */
if (dac33->irq >= 0)
snd_soc_add_controls(codec, dac33_nsample_snd_controls,
ARRAY_SIZE(dac33_nsample_snd_controls));
dac33_add_widgets(codec);
/* power on device */
dac33_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
/* Bias level configuration has enabled regulator an extra time */
regulator_bulk_disable(ARRAY_SIZE(dac33->supplies), dac33->supplies);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
return 0;
ASoC: Factor out snd_soc_init_card() snd_soc_init_card() is always called as the last part of the CODEC probe function so we can factor it out into the core card setup rather than have each CODEC replicate the code to do the initialiastation. This will be required to support multiple CODECs per card. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-03 22:13:13 +00:00
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
pcm_err:
dac33_hard_power(codec, 0);
return ret;
}
static int dac33_soc_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
dac33_set_bias_level(codec, SND_SOC_BIAS_OFF);
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
return 0;
}
static int dac33_soc_suspend(struct platform_device *pdev, pm_message_t state)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
dac33_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
static int dac33_soc_resume(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
dac33_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
dac33_set_bias_level(codec, codec->suspend_bias_level);
return 0;
}
struct snd_soc_codec_device soc_codec_dev_tlv320dac33 = {
.probe = dac33_soc_probe,
.remove = dac33_soc_remove,
.suspend = dac33_soc_suspend,
.resume = dac33_soc_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_tlv320dac33);
#define DAC33_RATES (SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000)
#define DAC33_FORMATS SNDRV_PCM_FMTBIT_S16_LE
static struct snd_soc_dai_ops dac33_dai_ops = {
.hw_params = dac33_hw_params,
.prepare = dac33_pcm_prepare,
.trigger = dac33_pcm_trigger,
.set_sysclk = dac33_set_dai_sysclk,
.set_fmt = dac33_set_dai_fmt,
};
struct snd_soc_dai dac33_dai = {
.name = "tlv320dac33",
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
.rates = DAC33_RATES,
.formats = DAC33_FORMATS,},
.ops = &dac33_dai_ops,
};
EXPORT_SYMBOL_GPL(dac33_dai);
ASoC: Add missing __devexit and __devinit annotations Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-12 14:13:00 +00:00
static int __devinit dac33_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
struct tlv320dac33_platform_data *pdata;
struct tlv320dac33_priv *dac33;
struct snd_soc_codec *codec;
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
int ret, i;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
if (client->dev.platform_data == NULL) {
dev_err(&client->dev, "Platform data not set\n");
return -ENODEV;
}
pdata = client->dev.platform_data;
dac33 = kzalloc(sizeof(struct tlv320dac33_priv), GFP_KERNEL);
if (dac33 == NULL)
return -ENOMEM;
codec = &dac33->codec;
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-14 06:35:19 +00:00
snd_soc_codec_set_drvdata(codec, dac33);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
codec->control_data = client;
mutex_init(&codec->mutex);
mutex_init(&dac33->mutex);
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
codec->name = "tlv320dac33";
codec->owner = THIS_MODULE;
codec->read = dac33_read_reg_cache;
codec->write = dac33_write_locked;
codec->hw_write = (hw_write_t) i2c_master_send;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = dac33_set_bias_level;
codec->dai = &dac33_dai;
codec->num_dai = 1;
codec->reg_cache_size = ARRAY_SIZE(dac33_reg);
codec->reg_cache = kmemdup(dac33_reg, ARRAY_SIZE(dac33_reg),
GFP_KERNEL);
if (codec->reg_cache == NULL) {
ret = -ENOMEM;
goto error_reg;
}
i2c_set_clientdata(client, dac33);
dac33->power_gpio = pdata->power_gpio;
ASoC: tlv320dac33: Burst mode BCLK divider configuration Add possibility to configure the burst mode BCLK divider through platform data structure. The BCLK divider changes the actual speed of the serial bus in burst mode, which is faster than the sampling frequency of the running stream. In this way platforms can experiment with the optimal burst speed without the need to modify the codec driver itself. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-20 07:39:36 +00:00
dac33->burst_bclkdiv = pdata->burst_bclkdiv;
ASoC: tlv320dac33: Add option for keeping the BCLK running Platform data option for the codec to keep the BCLK clock continuously running in FIFO modes (codec master). OMAP3 McBSP when in slave mode needs continuous BCLK running on the serial bus in order to operate correctly. Since in FIFO mode the DAC33 can also shut down the BCLK clock and enable it only when it is needed, let the platforms decide if the CPU side needs the BCLK running or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 14:26:22 +00:00
dac33->keep_bclk = pdata->keep_bclk;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
dac33->irq = client->irq;
dac33->nsample = NSAMPLE_MAX;
ASoC: tlv320dac33: Skip calculations in FIFO Bypass mode There is no need for calculations for FIFO bypass mode. Just in case set the nsample maximum limit, which has been done in the calculation phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-23 07:09:58 +00:00
dac33->nsample_max = NSAMPLE_MAX;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
/* Disable FIFO use by default */
ASoC: tlv320dac33: Change nsample switch to FIFO mode enum In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-31 08:30:19 +00:00
dac33->fifo_mode = DAC33_FIFO_BYPASS;
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
tlv320dac33_codec = codec;
codec->dev = &client->dev;
dac33_dai.dev = codec->dev;
/* Check if the reset GPIO number is valid and request it */
if (dac33->power_gpio >= 0) {
ret = gpio_request(dac33->power_gpio, "tlv320dac33 reset");
if (ret < 0) {
dev_err(codec->dev,
"Failed to request reset GPIO (%d)\n",
dac33->power_gpio);
snd_soc_unregister_dai(&dac33_dai);
snd_soc_unregister_codec(codec);
goto error_gpio;
}
gpio_direction_output(dac33->power_gpio, 0);
} else {
dac33->chip_power = 1;
}
/* Check if the IRQ number is valid and request it */
if (dac33->irq >= 0) {
ret = request_irq(dac33->irq, dac33_interrupt_handler,
IRQF_TRIGGER_RISING | IRQF_DISABLED,
codec->name, codec);
if (ret < 0) {
dev_err(codec->dev, "Could not request IRQ%d (%d)\n",
dac33->irq, ret);
dac33->irq = -1;
}
if (dac33->irq != -1) {
/* Setup work queue */
ASoC: tlv320dac33: Change RT wq to singlethread wq RT workqueue is going away in the near future, replace it with singlethread wq for now, which is still supported. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-26 11:55:11 +00:00
dac33->dac33_wq =
create_singlethread_workqueue("tlv320dac33");
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
if (dac33->dac33_wq == NULL) {
free_irq(dac33->irq, &dac33->codec);
ret = -ENOMEM;
goto error_wq;
}
INIT_WORK(&dac33->work, dac33_work);
}
}
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
for (i = 0; i < ARRAY_SIZE(dac33->supplies); i++)
dac33->supplies[i].supply = dac33_supply_names[i];
ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(dac33->supplies),
dac33->supplies);
if (ret != 0) {
dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
goto err_get;
}
ret = regulator_bulk_enable(ARRAY_SIZE(dac33->supplies),
dac33->supplies);
if (ret != 0) {
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
goto err_enable;
}
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
goto error_codec;
}
ret = snd_soc_register_dai(&dac33_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
snd_soc_unregister_codec(codec);
goto error_codec;
}
/* Shut down the codec for now */
dac33_hard_power(codec, 0);
return ret;
error_codec:
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
regulator_bulk_disable(ARRAY_SIZE(dac33->supplies), dac33->supplies);
err_enable:
regulator_bulk_free(ARRAY_SIZE(dac33->supplies), dac33->supplies);
err_get:
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
if (dac33->irq >= 0) {
free_irq(dac33->irq, &dac33->codec);
destroy_workqueue(dac33->dac33_wq);
}
error_wq:
if (dac33->power_gpio >= 0)
gpio_free(dac33->power_gpio);
error_gpio:
kfree(codec->reg_cache);
error_reg:
tlv320dac33_codec = NULL;
kfree(dac33);
return ret;
}
ASoC: Add missing __devexit and __devinit annotations Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-12 14:13:00 +00:00
static int __devexit dac33_i2c_remove(struct i2c_client *client)
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
{
struct tlv320dac33_priv *dac33;
dac33 = i2c_get_clientdata(client);
dac33_hard_power(&dac33->codec, 0);
if (dac33->power_gpio >= 0)
gpio_free(dac33->power_gpio);
if (dac33->irq >= 0)
free_irq(dac33->irq, &dac33->codec);
ASoC: tlv320dac33: Add support for regulator framework Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 11:49:10 +00:00
regulator_bulk_free(ARRAY_SIZE(dac33->supplies), dac33->supplies);
ASoC: Codec driver for Texas Instruments tlv320dac33 codec Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 06:03:56 +00:00
destroy_workqueue(dac33->dac33_wq);
snd_soc_unregister_dai(&dac33_dai);
snd_soc_unregister_codec(&dac33->codec);
kfree(dac33->codec.reg_cache);
kfree(dac33);
tlv320dac33_codec = NULL;
return 0;
}
static const struct i2c_device_id tlv320dac33_i2c_id[] = {
{
.name = "tlv320dac33",
.driver_data = 0,
},
{ },
};
static struct i2c_driver tlv320dac33_i2c_driver = {
.driver = {
.name = "tlv320dac33",
.owner = THIS_MODULE,
},
.probe = dac33_i2c_probe,
.remove = __devexit_p(dac33_i2c_remove),
.id_table = tlv320dac33_i2c_id,
};
static int __init dac33_module_init(void)
{
int r;
r = i2c_add_driver(&tlv320dac33_i2c_driver);
if (r < 0) {
printk(KERN_ERR "DAC33: driver registration failed\n");
return r;
}
return 0;
}
module_init(dac33_module_init);
static void __exit dac33_module_exit(void)
{
i2c_del_driver(&tlv320dac33_i2c_driver);
}
module_exit(dac33_module_exit);
MODULE_DESCRIPTION("ASoC TLV320DAC33 codec driver");
MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@nokia.com>");
MODULE_LICENSE("GPL");
Reference in New Issue Copy Permalink