linux/net/ceph/osd_client.c

2675 lines
70 KiB
C
Raw Normal View History

#include <linux/ceph/ceph_debug.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/highmem.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#ifdef CONFIG_BLOCK
#include <linux/bio.h>
#endif
#include <linux/ceph/libceph.h>
#include <linux/ceph/osd_client.h>
#include <linux/ceph/messenger.h>
#include <linux/ceph/decode.h>
#include <linux/ceph/auth.h>
#include <linux/ceph/pagelist.h>
#define OSD_OP_FRONT_LEN 4096
#define OSD_OPREPLY_FRONT_LEN 512
static struct kmem_cache *ceph_osd_request_cache;
static const struct ceph_connection_operations osd_con_ops;
static void __send_queued(struct ceph_osd_client *osdc);
static int __reset_osd(struct ceph_osd_client *osdc, struct ceph_osd *osd);
static void __register_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req);
static void __unregister_linger_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req);
static void __send_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req);
/*
* Implement client access to distributed object storage cluster.
*
* All data objects are stored within a cluster/cloud of OSDs, or
* "object storage devices." (Note that Ceph OSDs have _nothing_ to
* do with the T10 OSD extensions to SCSI.) Ceph OSDs are simply
* remote daemons serving up and coordinating consistent and safe
* access to storage.
*
* Cluster membership and the mapping of data objects onto storage devices
* are described by the osd map.
*
* We keep track of pending OSD requests (read, write), resubmit
* requests to different OSDs when the cluster topology/data layout
* change, or retry the affected requests when the communications
* channel with an OSD is reset.
*/
/*
* calculate the mapping of a file extent onto an object, and fill out the
* request accordingly. shorten extent as necessary if it crosses an
* object boundary.
*
* fill osd op in request message.
*/
static int calc_layout(struct ceph_file_layout *layout, u64 off, u64 *plen,
u64 *objnum, u64 *objoff, u64 *objlen)
{
u64 orig_len = *plen;
int r;
/* object extent? */
r = ceph_calc_file_object_mapping(layout, off, orig_len, objnum,
objoff, objlen);
if (r < 0)
return r;
if (*objlen < orig_len) {
*plen = *objlen;
dout(" skipping last %llu, final file extent %llu~%llu\n",
orig_len - *plen, off, *plen);
}
dout("calc_layout objnum=%llx %llu~%llu\n", *objnum, *objoff, *objlen);
return 0;
}
static void ceph_osd_data_init(struct ceph_osd_data *osd_data)
{
memset(osd_data, 0, sizeof (*osd_data));
osd_data->type = CEPH_OSD_DATA_TYPE_NONE;
}
static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
struct page **pages, u64 length, u32 alignment,
bool pages_from_pool, bool own_pages)
{
osd_data->type = CEPH_OSD_DATA_TYPE_PAGES;
osd_data->pages = pages;
osd_data->length = length;
osd_data->alignment = alignment;
osd_data->pages_from_pool = pages_from_pool;
osd_data->own_pages = own_pages;
}
static void ceph_osd_data_pagelist_init(struct ceph_osd_data *osd_data,
struct ceph_pagelist *pagelist)
{
osd_data->type = CEPH_OSD_DATA_TYPE_PAGELIST;
osd_data->pagelist = pagelist;
}
#ifdef CONFIG_BLOCK
static void ceph_osd_data_bio_init(struct ceph_osd_data *osd_data,
struct bio *bio, size_t bio_length)
{
osd_data->type = CEPH_OSD_DATA_TYPE_BIO;
osd_data->bio = bio;
osd_data->bio_length = bio_length;
}
#endif /* CONFIG_BLOCK */
#define osd_req_op_data(oreq, whch, typ, fld) \
({ \
BUG_ON(whch >= (oreq)->r_num_ops); \
&(oreq)->r_ops[whch].typ.fld; \
})
static struct ceph_osd_data *
osd_req_op_raw_data_in(struct ceph_osd_request *osd_req, unsigned int which)
{
BUG_ON(which >= osd_req->r_num_ops);
return &osd_req->r_ops[which].raw_data_in;
}
struct ceph_osd_data *
osd_req_op_extent_osd_data(struct ceph_osd_request *osd_req,
unsigned int which)
{
return osd_req_op_data(osd_req, which, extent, osd_data);
}
EXPORT_SYMBOL(osd_req_op_extent_osd_data);
struct ceph_osd_data *
osd_req_op_cls_response_data(struct ceph_osd_request *osd_req,
unsigned int which)
{
return osd_req_op_data(osd_req, which, cls, response_data);
}
EXPORT_SYMBOL(osd_req_op_cls_response_data); /* ??? */
void osd_req_op_raw_data_in_pages(struct ceph_osd_request *osd_req,
unsigned int which, struct page **pages,
u64 length, u32 alignment,
bool pages_from_pool, bool own_pages)
{
struct ceph_osd_data *osd_data;
osd_data = osd_req_op_raw_data_in(osd_req, which);
ceph_osd_data_pages_init(osd_data, pages, length, alignment,
pages_from_pool, own_pages);
}
EXPORT_SYMBOL(osd_req_op_raw_data_in_pages);
void osd_req_op_extent_osd_data_pages(struct ceph_osd_request *osd_req,
unsigned int which, struct page **pages,
u64 length, u32 alignment,
bool pages_from_pool, bool own_pages)
{
struct ceph_osd_data *osd_data;
osd_data = osd_req_op_data(osd_req, which, extent, osd_data);
ceph_osd_data_pages_init(osd_data, pages, length, alignment,
pages_from_pool, own_pages);
}
EXPORT_SYMBOL(osd_req_op_extent_osd_data_pages);
void osd_req_op_extent_osd_data_pagelist(struct ceph_osd_request *osd_req,
unsigned int which, struct ceph_pagelist *pagelist)
{
struct ceph_osd_data *osd_data;
osd_data = osd_req_op_data(osd_req, which, extent, osd_data);
ceph_osd_data_pagelist_init(osd_data, pagelist);
}
EXPORT_SYMBOL(osd_req_op_extent_osd_data_pagelist);
#ifdef CONFIG_BLOCK
void osd_req_op_extent_osd_data_bio(struct ceph_osd_request *osd_req,
unsigned int which, struct bio *bio, size_t bio_length)
{
struct ceph_osd_data *osd_data;
osd_data = osd_req_op_data(osd_req, which, extent, osd_data);
ceph_osd_data_bio_init(osd_data, bio, bio_length);
}
EXPORT_SYMBOL(osd_req_op_extent_osd_data_bio);
#endif /* CONFIG_BLOCK */
static void osd_req_op_cls_request_info_pagelist(
struct ceph_osd_request *osd_req,
unsigned int which, struct ceph_pagelist *pagelist)
{
struct ceph_osd_data *osd_data;
osd_data = osd_req_op_data(osd_req, which, cls, request_info);
ceph_osd_data_pagelist_init(osd_data, pagelist);
}
void osd_req_op_cls_request_data_pagelist(
struct ceph_osd_request *osd_req,
unsigned int which, struct ceph_pagelist *pagelist)
{
struct ceph_osd_data *osd_data;
osd_data = osd_req_op_data(osd_req, which, cls, request_data);
ceph_osd_data_pagelist_init(osd_data, pagelist);
}
EXPORT_SYMBOL(osd_req_op_cls_request_data_pagelist);
void osd_req_op_cls_request_data_pages(struct ceph_osd_request *osd_req,
unsigned int which, struct page **pages, u64 length,
u32 alignment, bool pages_from_pool, bool own_pages)
{
struct ceph_osd_data *osd_data;
osd_data = osd_req_op_data(osd_req, which, cls, request_data);
ceph_osd_data_pages_init(osd_data, pages, length, alignment,
pages_from_pool, own_pages);
}
EXPORT_SYMBOL(osd_req_op_cls_request_data_pages);
void osd_req_op_cls_response_data_pages(struct ceph_osd_request *osd_req,
unsigned int which, struct page **pages, u64 length,
u32 alignment, bool pages_from_pool, bool own_pages)
{
struct ceph_osd_data *osd_data;
osd_data = osd_req_op_data(osd_req, which, cls, response_data);
ceph_osd_data_pages_init(osd_data, pages, length, alignment,
pages_from_pool, own_pages);
}
EXPORT_SYMBOL(osd_req_op_cls_response_data_pages);
static u64 ceph_osd_data_length(struct ceph_osd_data *osd_data)
{
switch (osd_data->type) {
case CEPH_OSD_DATA_TYPE_NONE:
return 0;
case CEPH_OSD_DATA_TYPE_PAGES:
return osd_data->length;
case CEPH_OSD_DATA_TYPE_PAGELIST:
return (u64)osd_data->pagelist->length;
#ifdef CONFIG_BLOCK
case CEPH_OSD_DATA_TYPE_BIO:
return (u64)osd_data->bio_length;
#endif /* CONFIG_BLOCK */
default:
WARN(true, "unrecognized data type %d\n", (int)osd_data->type);
return 0;
}
}
static void ceph_osd_data_release(struct ceph_osd_data *osd_data)
{
if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGES && osd_data->own_pages) {
int num_pages;
num_pages = calc_pages_for((u64)osd_data->alignment,
(u64)osd_data->length);
ceph_release_page_vector(osd_data->pages, num_pages);
}
ceph_osd_data_init(osd_data);
}
static void osd_req_op_data_release(struct ceph_osd_request *osd_req,
unsigned int which)
{
struct ceph_osd_req_op *op;
BUG_ON(which >= osd_req->r_num_ops);
op = &osd_req->r_ops[which];
switch (op->op) {
case CEPH_OSD_OP_READ:
case CEPH_OSD_OP_WRITE:
ceph_osd_data_release(&op->extent.osd_data);
break;
case CEPH_OSD_OP_CALL:
ceph_osd_data_release(&op->cls.request_info);
ceph_osd_data_release(&op->cls.request_data);
ceph_osd_data_release(&op->cls.response_data);
break;
default:
break;
}
}
/*
* requests
*/
void ceph_osdc_release_request(struct kref *kref)
{
struct ceph_osd_request *req;
unsigned int which;
req = container_of(kref, struct ceph_osd_request, r_kref);
if (req->r_request)
ceph_msg_put(req->r_request);
libceph: drop ceph_osd_request->r_con_filling_msg A field in an osd request keeps track of whether a connection is currently filling the request's reply message. This patch gets rid of that field. An osd request includes two messages--a request and a reply--and they're both associated with the connection that existed to its the target osd at the time the request was created. An osd request can be dropped early, even when it's in flight. And at that time both messages are released. It's possible the reply message has been supplied to its connection to receive an incoming response message at the time the osd request gets dropped. So ceph_osdc_release_request() revokes that message from the connection before releasing it so things get cleaned up properly. Previously this may have caused a problem, because the connection that a message was associated with might have gone away before the revoke request. And to avoid any problems using that connection, the osd client held a reference to it when it supplies its response message. However since this commit: 38941f80 libceph: have messages point to their connection all messages hold a reference to the connection they are associated with whenever the connection is actively operating on the message (i.e. while the message is queued to send or sending, and when it data is being received into it). And if a message has no connection associated with it, ceph_msg_revoke_incoming() won't do anything when asked to revoke it. As a result, there is no need to keep an additional reference to the connection associated with a message when we hand the message to the messenger when it calls our alloc_msg() method to receive something. If the connection *were* operating on it, it would have its own reference, and if not, there's no work to be done when we need to revoke it. So get rid of the osd request's r_con_filling_msg field. This resolves: http://tracker.ceph.com/issues/4647 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-01 21:12:14 +00:00
if (req->r_reply) {
ceph_msg_revoke_incoming(req->r_reply);
ceph_msg_put(req->r_reply);
libceph: drop ceph_osd_request->r_con_filling_msg A field in an osd request keeps track of whether a connection is currently filling the request's reply message. This patch gets rid of that field. An osd request includes two messages--a request and a reply--and they're both associated with the connection that existed to its the target osd at the time the request was created. An osd request can be dropped early, even when it's in flight. And at that time both messages are released. It's possible the reply message has been supplied to its connection to receive an incoming response message at the time the osd request gets dropped. So ceph_osdc_release_request() revokes that message from the connection before releasing it so things get cleaned up properly. Previously this may have caused a problem, because the connection that a message was associated with might have gone away before the revoke request. And to avoid any problems using that connection, the osd client held a reference to it when it supplies its response message. However since this commit: 38941f80 libceph: have messages point to their connection all messages hold a reference to the connection they are associated with whenever the connection is actively operating on the message (i.e. while the message is queued to send or sending, and when it data is being received into it). And if a message has no connection associated with it, ceph_msg_revoke_incoming() won't do anything when asked to revoke it. As a result, there is no need to keep an additional reference to the connection associated with a message when we hand the message to the messenger when it calls our alloc_msg() method to receive something. If the connection *were* operating on it, it would have its own reference, and if not, there's no work to be done when we need to revoke it. So get rid of the osd request's r_con_filling_msg field. This resolves: http://tracker.ceph.com/issues/4647 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-01 21:12:14 +00:00
}
for (which = 0; which < req->r_num_ops; which++)
osd_req_op_data_release(req, which);
ceph_put_snap_context(req->r_snapc);
if (req->r_mempool)
mempool_free(req, req->r_osdc->req_mempool);
else
kmem_cache_free(ceph_osd_request_cache, req);
}
EXPORT_SYMBOL(ceph_osdc_release_request);
struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc,
struct ceph_snap_context *snapc,
unsigned int num_ops,
bool use_mempool,
gfp_t gfp_flags)
{
struct ceph_osd_request *req;
struct ceph_msg *msg;
size_t msg_size;
BUILD_BUG_ON(CEPH_OSD_MAX_OP > U16_MAX);
BUG_ON(num_ops > CEPH_OSD_MAX_OP);
msg_size = 4 + 4 + 8 + 8 + 4+8;
msg_size += 2 + 4 + 8 + 4 + 4; /* oloc */
msg_size += 1 + 8 + 4 + 4; /* pg_t */
msg_size += 4 + MAX_OBJ_NAME_SIZE;
msg_size += 2 + num_ops*sizeof(struct ceph_osd_op);
msg_size += 8; /* snapid */
msg_size += 8; /* snap_seq */
msg_size += 8 * (snapc ? snapc->num_snaps : 0); /* snaps */
msg_size += 4;
if (use_mempool) {
req = mempool_alloc(osdc->req_mempool, gfp_flags);
memset(req, 0, sizeof(*req));
} else {
req = kmem_cache_zalloc(ceph_osd_request_cache, gfp_flags);
}
if (req == NULL)
return NULL;
req->r_osdc = osdc;
req->r_mempool = use_mempool;
req->r_num_ops = num_ops;
kref_init(&req->r_kref);
init_completion(&req->r_completion);
init_completion(&req->r_safe_completion);
RB_CLEAR_NODE(&req->r_node);
INIT_LIST_HEAD(&req->r_unsafe_item);
INIT_LIST_HEAD(&req->r_linger_item);
INIT_LIST_HEAD(&req->r_linger_osd);
INIT_LIST_HEAD(&req->r_req_lru_item);
INIT_LIST_HEAD(&req->r_osd_item);
/* create reply message */
if (use_mempool)
msg = ceph_msgpool_get(&osdc->msgpool_op_reply, 0);
else
msg = ceph_msg_new(CEPH_MSG_OSD_OPREPLY,
OSD_OPREPLY_FRONT_LEN, gfp_flags, true);
if (!msg) {
ceph_osdc_put_request(req);
return NULL;
}
req->r_reply = msg;
/* create request message; allow space for oid */
if (use_mempool)
msg = ceph_msgpool_get(&osdc->msgpool_op, 0);
else
msg = ceph_msg_new(CEPH_MSG_OSD_OP, msg_size, gfp_flags, true);
if (!msg) {
ceph_osdc_put_request(req);
return NULL;
}
memset(msg->front.iov_base, 0, msg->front.iov_len);
req->r_request = msg;
return req;
}
EXPORT_SYMBOL(ceph_osdc_alloc_request);
static bool osd_req_opcode_valid(u16 opcode)
{
switch (opcode) {
case CEPH_OSD_OP_READ:
case CEPH_OSD_OP_STAT:
case CEPH_OSD_OP_MAPEXT:
case CEPH_OSD_OP_MASKTRUNC:
case CEPH_OSD_OP_SPARSE_READ:
case CEPH_OSD_OP_NOTIFY:
case CEPH_OSD_OP_NOTIFY_ACK:
case CEPH_OSD_OP_ASSERT_VER:
case CEPH_OSD_OP_WRITE:
case CEPH_OSD_OP_WRITEFULL:
case CEPH_OSD_OP_TRUNCATE:
case CEPH_OSD_OP_ZERO:
case CEPH_OSD_OP_DELETE:
case CEPH_OSD_OP_APPEND:
case CEPH_OSD_OP_STARTSYNC:
case CEPH_OSD_OP_SETTRUNC:
case CEPH_OSD_OP_TRIMTRUNC:
case CEPH_OSD_OP_TMAPUP:
case CEPH_OSD_OP_TMAPPUT:
case CEPH_OSD_OP_TMAPGET:
case CEPH_OSD_OP_CREATE:
case CEPH_OSD_OP_ROLLBACK:
case CEPH_OSD_OP_WATCH:
case CEPH_OSD_OP_OMAPGETKEYS:
case CEPH_OSD_OP_OMAPGETVALS:
case CEPH_OSD_OP_OMAPGETHEADER:
case CEPH_OSD_OP_OMAPGETVALSBYKEYS:
case CEPH_OSD_OP_OMAPSETVALS:
case CEPH_OSD_OP_OMAPSETHEADER:
case CEPH_OSD_OP_OMAPCLEAR:
case CEPH_OSD_OP_OMAPRMKEYS:
case CEPH_OSD_OP_OMAP_CMP:
case CEPH_OSD_OP_CLONERANGE:
case CEPH_OSD_OP_ASSERT_SRC_VERSION:
case CEPH_OSD_OP_SRC_CMPXATTR:
case CEPH_OSD_OP_GETXATTR:
case CEPH_OSD_OP_GETXATTRS:
case CEPH_OSD_OP_CMPXATTR:
case CEPH_OSD_OP_SETXATTR:
case CEPH_OSD_OP_SETXATTRS:
case CEPH_OSD_OP_RESETXATTRS:
case CEPH_OSD_OP_RMXATTR:
case CEPH_OSD_OP_PULL:
case CEPH_OSD_OP_PUSH:
case CEPH_OSD_OP_BALANCEREADS:
case CEPH_OSD_OP_UNBALANCEREADS:
case CEPH_OSD_OP_SCRUB:
case CEPH_OSD_OP_SCRUB_RESERVE:
case CEPH_OSD_OP_SCRUB_UNRESERVE:
case CEPH_OSD_OP_SCRUB_STOP:
case CEPH_OSD_OP_SCRUB_MAP:
case CEPH_OSD_OP_WRLOCK:
case CEPH_OSD_OP_WRUNLOCK:
case CEPH_OSD_OP_RDLOCK:
case CEPH_OSD_OP_RDUNLOCK:
case CEPH_OSD_OP_UPLOCK:
case CEPH_OSD_OP_DNLOCK:
case CEPH_OSD_OP_CALL:
case CEPH_OSD_OP_PGLS:
case CEPH_OSD_OP_PGLS_FILTER:
return true;
default:
return false;
}
}
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
/*
* This is an osd op init function for opcodes that have no data or
* other information associated with them. It also serves as a
* common init routine for all the other init functions, below.
*/
static struct ceph_osd_req_op *
_osd_req_op_init(struct ceph_osd_request *osd_req, unsigned int which,
u16 opcode)
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
{
struct ceph_osd_req_op *op;
BUG_ON(which >= osd_req->r_num_ops);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
BUG_ON(!osd_req_opcode_valid(opcode));
op = &osd_req->r_ops[which];
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
memset(op, 0, sizeof (*op));
op->op = opcode;
return op;
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
}
void osd_req_op_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode)
{
(void)_osd_req_op_init(osd_req, which, opcode);
}
EXPORT_SYMBOL(osd_req_op_init);
void osd_req_op_extent_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode,
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
u64 offset, u64 length,
u64 truncate_size, u32 truncate_seq)
{
struct ceph_osd_req_op *op = _osd_req_op_init(osd_req, which, opcode);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
size_t payload_len = 0;
BUG_ON(opcode != CEPH_OSD_OP_READ && opcode != CEPH_OSD_OP_WRITE &&
opcode != CEPH_OSD_OP_DELETE && opcode != CEPH_OSD_OP_ZERO &&
opcode != CEPH_OSD_OP_TRUNCATE);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
op->extent.offset = offset;
op->extent.length = length;
op->extent.truncate_size = truncate_size;
op->extent.truncate_seq = truncate_seq;
if (opcode == CEPH_OSD_OP_WRITE)
payload_len += length;
op->payload_len = payload_len;
}
EXPORT_SYMBOL(osd_req_op_extent_init);
void osd_req_op_extent_update(struct ceph_osd_request *osd_req,
unsigned int which, u64 length)
{
struct ceph_osd_req_op *op;
u64 previous;
BUG_ON(which >= osd_req->r_num_ops);
op = &osd_req->r_ops[which];
previous = op->extent.length;
if (length == previous)
return; /* Nothing to do */
BUG_ON(length > previous);
op->extent.length = length;
op->payload_len -= previous - length;
}
EXPORT_SYMBOL(osd_req_op_extent_update);
void osd_req_op_cls_init(struct ceph_osd_request *osd_req, unsigned int which,
u16 opcode, const char *class, const char *method)
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
{
struct ceph_osd_req_op *op = _osd_req_op_init(osd_req, which, opcode);
struct ceph_pagelist *pagelist;
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
size_t payload_len = 0;
size_t size;
BUG_ON(opcode != CEPH_OSD_OP_CALL);
pagelist = kmalloc(sizeof (*pagelist), GFP_NOFS);
BUG_ON(!pagelist);
ceph_pagelist_init(pagelist);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
op->cls.class_name = class;
size = strlen(class);
BUG_ON(size > (size_t) U8_MAX);
op->cls.class_len = size;
ceph_pagelist_append(pagelist, class, size);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
payload_len += size;
op->cls.method_name = method;
size = strlen(method);
BUG_ON(size > (size_t) U8_MAX);
op->cls.method_len = size;
ceph_pagelist_append(pagelist, method, size);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
payload_len += size;
osd_req_op_cls_request_info_pagelist(osd_req, which, pagelist);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
op->cls.argc = 0; /* currently unused */
op->payload_len = payload_len;
}
EXPORT_SYMBOL(osd_req_op_cls_init);
void osd_req_op_watch_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode,
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
u64 cookie, u64 version, int flag)
{
struct ceph_osd_req_op *op = _osd_req_op_init(osd_req, which, opcode);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
BUG_ON(opcode != CEPH_OSD_OP_NOTIFY_ACK && opcode != CEPH_OSD_OP_WATCH);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
op->watch.cookie = cookie;
op->watch.ver = version;
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
if (opcode == CEPH_OSD_OP_WATCH && flag)
op->watch.flag = (u8)1;
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 01:50:00 +00:00
}
EXPORT_SYMBOL(osd_req_op_watch_init);
static void ceph_osdc_msg_data_add(struct ceph_msg *msg,
struct ceph_osd_data *osd_data)
{
u64 length = ceph_osd_data_length(osd_data);
if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGES) {
BUG_ON(length > (u64) SIZE_MAX);
if (length)
ceph_msg_data_add_pages(msg, osd_data->pages,
length, osd_data->alignment);
} else if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGELIST) {
BUG_ON(!length);
ceph_msg_data_add_pagelist(msg, osd_data->pagelist);
#ifdef CONFIG_BLOCK
} else if (osd_data->type == CEPH_OSD_DATA_TYPE_BIO) {
ceph_msg_data_add_bio(msg, osd_data->bio, length);
#endif
} else {
BUG_ON(osd_data->type != CEPH_OSD_DATA_TYPE_NONE);
}
}
static u64 osd_req_encode_op(struct ceph_osd_request *req,
struct ceph_osd_op *dst, unsigned int which)
{
struct ceph_osd_req_op *src;
struct ceph_osd_data *osd_data;
u64 request_data_len = 0;
u64 data_length;
BUG_ON(which >= req->r_num_ops);
src = &req->r_ops[which];
if (WARN_ON(!osd_req_opcode_valid(src->op))) {
pr_err("unrecognized osd opcode %d\n", src->op);
return 0;
}
switch (src->op) {
case CEPH_OSD_OP_STAT:
osd_data = &src->raw_data_in;
ceph_osdc_msg_data_add(req->r_reply, osd_data);
break;
case CEPH_OSD_OP_READ:
case CEPH_OSD_OP_WRITE:
case CEPH_OSD_OP_ZERO:
case CEPH_OSD_OP_DELETE:
case CEPH_OSD_OP_TRUNCATE:
if (src->op == CEPH_OSD_OP_WRITE)
request_data_len = src->extent.length;
dst->extent.offset = cpu_to_le64(src->extent.offset);
dst->extent.length = cpu_to_le64(src->extent.length);
dst->extent.truncate_size =
cpu_to_le64(src->extent.truncate_size);
dst->extent.truncate_seq =
cpu_to_le32(src->extent.truncate_seq);
osd_data = &src->extent.osd_data;
if (src->op == CEPH_OSD_OP_WRITE)
ceph_osdc_msg_data_add(req->r_request, osd_data);
else
ceph_osdc_msg_data_add(req->r_reply, osd_data);
break;
case CEPH_OSD_OP_CALL:
dst->cls.class_len = src->cls.class_len;
dst->cls.method_len = src->cls.method_len;
osd_data = &src->cls.request_info;
ceph_osdc_msg_data_add(req->r_request, osd_data);
BUG_ON(osd_data->type != CEPH_OSD_DATA_TYPE_PAGELIST);
request_data_len = osd_data->pagelist->length;
osd_data = &src->cls.request_data;
data_length = ceph_osd_data_length(osd_data);
if (data_length) {
BUG_ON(osd_data->type == CEPH_OSD_DATA_TYPE_NONE);
dst->cls.indata_len = cpu_to_le32(data_length);
ceph_osdc_msg_data_add(req->r_request, osd_data);
src->payload_len += data_length;
request_data_len += data_length;
}
osd_data = &src->cls.response_data;
ceph_osdc_msg_data_add(req->r_reply, osd_data);
break;
case CEPH_OSD_OP_STARTSYNC:
break;
case CEPH_OSD_OP_NOTIFY_ACK:
case CEPH_OSD_OP_WATCH:
dst->watch.cookie = cpu_to_le64(src->watch.cookie);
dst->watch.ver = cpu_to_le64(src->watch.ver);
dst->watch.flag = src->watch.flag;
break;
default:
pr_err("unsupported osd opcode %s\n",
ceph_osd_op_name(src->op));
WARN_ON(1);
return 0;
}
dst->op = cpu_to_le16(src->op);
dst->payload_len = cpu_to_le32(src->payload_len);
return request_data_len;
}
/*
* build new request AND message, calculate layout, and adjust file
* extent as needed.
*
* if the file was recently truncated, we include information about its
* old and new size so that the object can be updated appropriately. (we
* avoid synchronously deleting truncated objects because it's slow.)
*
* if @do_sync, include a 'startsync' command so that the osd will flush
* data quickly.
*/
struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *osdc,
struct ceph_file_layout *layout,
struct ceph_vino vino,
u64 off, u64 *plen, int num_ops,
int opcode, int flags,
struct ceph_snap_context *snapc,
u32 truncate_seq,
u64 truncate_size,
bool use_mempool)
{
struct ceph_osd_request *req;
u64 objnum = 0;
u64 objoff = 0;
u64 objlen = 0;
u32 object_size;
u64 object_base;
int r;
BUG_ON(opcode != CEPH_OSD_OP_READ && opcode != CEPH_OSD_OP_WRITE &&
opcode != CEPH_OSD_OP_DELETE && opcode != CEPH_OSD_OP_ZERO &&
opcode != CEPH_OSD_OP_TRUNCATE);
req = ceph_osdc_alloc_request(osdc, snapc, num_ops, use_mempool,
GFP_NOFS);
if (!req)
return ERR_PTR(-ENOMEM);
req->r_flags = flags;
/* calculate max write size */
r = calc_layout(layout, off, plen, &objnum, &objoff, &objlen);
if (r < 0) {
ceph_osdc_put_request(req);
return ERR_PTR(r);
}
object_size = le32_to_cpu(layout->fl_object_size);
object_base = off - objoff;
if (!(truncate_seq == 1 && truncate_size == -1ULL)) {
if (truncate_size <= object_base) {
truncate_size = 0;
} else {
truncate_size -= object_base;
if (truncate_size > object_size)
truncate_size = object_size;
}
}
osd_req_op_extent_init(req, 0, opcode, objoff, objlen,
truncate_size, truncate_seq);
/*
* A second op in the ops array means the caller wants to
* also issue a include a 'startsync' command so that the
* osd will flush data quickly.
*/
if (num_ops > 1)
osd_req_op_init(req, 1, CEPH_OSD_OP_STARTSYNC);
req->r_file_layout = *layout; /* keep a copy */
snprintf(req->r_oid, sizeof(req->r_oid), "%llx.%08llx",
vino.ino, objnum);
req->r_oid_len = strlen(req->r_oid);
return req;
}
EXPORT_SYMBOL(ceph_osdc_new_request);
/*
* We keep osd requests in an rbtree, sorted by ->r_tid.
*/
static void __insert_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *new)
{
struct rb_node **p = &osdc->requests.rb_node;
struct rb_node *parent = NULL;
struct ceph_osd_request *req = NULL;
while (*p) {
parent = *p;
req = rb_entry(parent, struct ceph_osd_request, r_node);
if (new->r_tid < req->r_tid)
p = &(*p)->rb_left;
else if (new->r_tid > req->r_tid)
p = &(*p)->rb_right;
else
BUG();
}
rb_link_node(&new->r_node, parent, p);
rb_insert_color(&new->r_node, &osdc->requests);
}
static struct ceph_osd_request *__lookup_request(struct ceph_osd_client *osdc,
u64 tid)
{
struct ceph_osd_request *req;
struct rb_node *n = osdc->requests.rb_node;
while (n) {
req = rb_entry(n, struct ceph_osd_request, r_node);
if (tid < req->r_tid)
n = n->rb_left;
else if (tid > req->r_tid)
n = n->rb_right;
else
return req;
}
return NULL;
}
static struct ceph_osd_request *
__lookup_request_ge(struct ceph_osd_client *osdc,
u64 tid)
{
struct ceph_osd_request *req;
struct rb_node *n = osdc->requests.rb_node;
while (n) {
req = rb_entry(n, struct ceph_osd_request, r_node);
if (tid < req->r_tid) {
if (!n->rb_left)
return req;
n = n->rb_left;
} else if (tid > req->r_tid) {
n = n->rb_right;
} else {
return req;
}
}
return NULL;
}
/*
* Resubmit requests pending on the given osd.
*/
static void __kick_osd_requests(struct ceph_osd_client *osdc,
struct ceph_osd *osd)
{
struct ceph_osd_request *req, *nreq;
libceph: requeue only sent requests when kicking The osd expects incoming requests for a given object from a given client to arrive in order, with the tid for each request being greater than the tid for requests that have already arrived. This patch fixes two places the osd client might not maintain that ordering. For the osd client, the connection fault method is osd_reset(). That function calls __reset_osd() to close and re-open the connection, then calls __kick_osd_requests() to cause all outstanding requests for the affected osd to be re-sent after the connection has been re-established. When an osd is reset, any in-flight messages will need to be re-sent. An osd client maintains distinct lists for unsent and in-flight messages. Meanwhile, an osd maintains a single list of all its requests (both sent and un-sent). (Each message is linked into two lists--one for the osd client and one list for the osd.) To process an osd "kick" operation, the request list for the *osd* is traversed, and each request is moved off whichever osd *client* list it was on (unsent or sent) and placed onto the osd client's unsent list. (It remains where it is on the osd's request list.) When that is done, osd_reset() calls __send_queued() to cause each of the osd client's unsent messages to be sent. OK, with that background... As the osd request list is traversed each request is prepended to the osd client's unsent list in the order they're seen. The effect of this is to reverse the order of these requests as they are put (back) onto the unsent list. Instead, build up a list of only the requests for an osd that have already been sent (by checking their r_sent flag values). Once an unsent request is found, stop examining requests and prepend the requests that need re-sending to the osd client's unsent list. Preserve the original order of requests in the process (previously re-queued requests were reversed in this process). Because they have already been sent, they will have lower tids than any request already present on the unsent list. Just below that, traverse the linger list in forward order as before, but add them to the *tail* of the list rather than the head. These requests get re-registered, and in the process are give a new (higher) tid, so the should go at the end. This partially resolves: http://tracker.ceph.com/issues/4392 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-off-by: Sage Weil <sage@inktank.com>
2013-03-25 23:16:11 +00:00
LIST_HEAD(resend);
int err;
dout("__kick_osd_requests osd%d\n", osd->o_osd);
err = __reset_osd(osdc, osd);
if (err)
return;
libceph: requeue only sent requests when kicking The osd expects incoming requests for a given object from a given client to arrive in order, with the tid for each request being greater than the tid for requests that have already arrived. This patch fixes two places the osd client might not maintain that ordering. For the osd client, the connection fault method is osd_reset(). That function calls __reset_osd() to close and re-open the connection, then calls __kick_osd_requests() to cause all outstanding requests for the affected osd to be re-sent after the connection has been re-established. When an osd is reset, any in-flight messages will need to be re-sent. An osd client maintains distinct lists for unsent and in-flight messages. Meanwhile, an osd maintains a single list of all its requests (both sent and un-sent). (Each message is linked into two lists--one for the osd client and one list for the osd.) To process an osd "kick" operation, the request list for the *osd* is traversed, and each request is moved off whichever osd *client* list it was on (unsent or sent) and placed onto the osd client's unsent list. (It remains where it is on the osd's request list.) When that is done, osd_reset() calls __send_queued() to cause each of the osd client's unsent messages to be sent. OK, with that background... As the osd request list is traversed each request is prepended to the osd client's unsent list in the order they're seen. The effect of this is to reverse the order of these requests as they are put (back) onto the unsent list. Instead, build up a list of only the requests for an osd that have already been sent (by checking their r_sent flag values). Once an unsent request is found, stop examining requests and prepend the requests that need re-sending to the osd client's unsent list. Preserve the original order of requests in the process (previously re-queued requests were reversed in this process). Because they have already been sent, they will have lower tids than any request already present on the unsent list. Just below that, traverse the linger list in forward order as before, but add them to the *tail* of the list rather than the head. These requests get re-registered, and in the process are give a new (higher) tid, so the should go at the end. This partially resolves: http://tracker.ceph.com/issues/4392 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-off-by: Sage Weil <sage@inktank.com>
2013-03-25 23:16:11 +00:00
/*
* Build up a list of requests to resend by traversing the
* osd's list of requests. Requests for a given object are
* sent in tid order, and that is also the order they're
* kept on this list. Therefore all requests that are in
* flight will be found first, followed by all requests that
* have not yet been sent. And to resend requests while
* preserving this order we will want to put any sent
* requests back on the front of the osd client's unsent
* list.
*
* So we build a separate ordered list of already-sent
* requests for the affected osd and splice it onto the
* front of the osd client's unsent list. Once we've seen a
* request that has not yet been sent we're done. Those
* requests are already sitting right where they belong.
*/
list_for_each_entry(req, &osd->o_requests, r_osd_item) {
libceph: requeue only sent requests when kicking The osd expects incoming requests for a given object from a given client to arrive in order, with the tid for each request being greater than the tid for requests that have already arrived. This patch fixes two places the osd client might not maintain that ordering. For the osd client, the connection fault method is osd_reset(). That function calls __reset_osd() to close and re-open the connection, then calls __kick_osd_requests() to cause all outstanding requests for the affected osd to be re-sent after the connection has been re-established. When an osd is reset, any in-flight messages will need to be re-sent. An osd client maintains distinct lists for unsent and in-flight messages. Meanwhile, an osd maintains a single list of all its requests (both sent and un-sent). (Each message is linked into two lists--one for the osd client and one list for the osd.) To process an osd "kick" operation, the request list for the *osd* is traversed, and each request is moved off whichever osd *client* list it was on (unsent or sent) and placed onto the osd client's unsent list. (It remains where it is on the osd's request list.) When that is done, osd_reset() calls __send_queued() to cause each of the osd client's unsent messages to be sent. OK, with that background... As the osd request list is traversed each request is prepended to the osd client's unsent list in the order they're seen. The effect of this is to reverse the order of these requests as they are put (back) onto the unsent list. Instead, build up a list of only the requests for an osd that have already been sent (by checking their r_sent flag values). Once an unsent request is found, stop examining requests and prepend the requests that need re-sending to the osd client's unsent list. Preserve the original order of requests in the process (previously re-queued requests were reversed in this process). Because they have already been sent, they will have lower tids than any request already present on the unsent list. Just below that, traverse the linger list in forward order as before, but add them to the *tail* of the list rather than the head. These requests get re-registered, and in the process are give a new (higher) tid, so the should go at the end. This partially resolves: http://tracker.ceph.com/issues/4392 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-off-by: Sage Weil <sage@inktank.com>
2013-03-25 23:16:11 +00:00
if (!req->r_sent)
break;
list_move_tail(&req->r_req_lru_item, &resend);
dout("requeueing %p tid %llu osd%d\n", req, req->r_tid,
osd->o_osd);
if (!req->r_linger)
req->r_flags |= CEPH_OSD_FLAG_RETRY;
}
libceph: requeue only sent requests when kicking The osd expects incoming requests for a given object from a given client to arrive in order, with the tid for each request being greater than the tid for requests that have already arrived. This patch fixes two places the osd client might not maintain that ordering. For the osd client, the connection fault method is osd_reset(). That function calls __reset_osd() to close and re-open the connection, then calls __kick_osd_requests() to cause all outstanding requests for the affected osd to be re-sent after the connection has been re-established. When an osd is reset, any in-flight messages will need to be re-sent. An osd client maintains distinct lists for unsent and in-flight messages. Meanwhile, an osd maintains a single list of all its requests (both sent and un-sent). (Each message is linked into two lists--one for the osd client and one list for the osd.) To process an osd "kick" operation, the request list for the *osd* is traversed, and each request is moved off whichever osd *client* list it was on (unsent or sent) and placed onto the osd client's unsent list. (It remains where it is on the osd's request list.) When that is done, osd_reset() calls __send_queued() to cause each of the osd client's unsent messages to be sent. OK, with that background... As the osd request list is traversed each request is prepended to the osd client's unsent list in the order they're seen. The effect of this is to reverse the order of these requests as they are put (back) onto the unsent list. Instead, build up a list of only the requests for an osd that have already been sent (by checking their r_sent flag values). Once an unsent request is found, stop examining requests and prepend the requests that need re-sending to the osd client's unsent list. Preserve the original order of requests in the process (previously re-queued requests were reversed in this process). Because they have already been sent, they will have lower tids than any request already present on the unsent list. Just below that, traverse the linger list in forward order as before, but add them to the *tail* of the list rather than the head. These requests get re-registered, and in the process are give a new (higher) tid, so the should go at the end. This partially resolves: http://tracker.ceph.com/issues/4392 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-off-by: Sage Weil <sage@inktank.com>
2013-03-25 23:16:11 +00:00
list_splice(&resend, &osdc->req_unsent);
libceph: requeue only sent requests when kicking The osd expects incoming requests for a given object from a given client to arrive in order, with the tid for each request being greater than the tid for requests that have already arrived. This patch fixes two places the osd client might not maintain that ordering. For the osd client, the connection fault method is osd_reset(). That function calls __reset_osd() to close and re-open the connection, then calls __kick_osd_requests() to cause all outstanding requests for the affected osd to be re-sent after the connection has been re-established. When an osd is reset, any in-flight messages will need to be re-sent. An osd client maintains distinct lists for unsent and in-flight messages. Meanwhile, an osd maintains a single list of all its requests (both sent and un-sent). (Each message is linked into two lists--one for the osd client and one list for the osd.) To process an osd "kick" operation, the request list for the *osd* is traversed, and each request is moved off whichever osd *client* list it was on (unsent or sent) and placed onto the osd client's unsent list. (It remains where it is on the osd's request list.) When that is done, osd_reset() calls __send_queued() to cause each of the osd client's unsent messages to be sent. OK, with that background... As the osd request list is traversed each request is prepended to the osd client's unsent list in the order they're seen. The effect of this is to reverse the order of these requests as they are put (back) onto the unsent list. Instead, build up a list of only the requests for an osd that have already been sent (by checking their r_sent flag values). Once an unsent request is found, stop examining requests and prepend the requests that need re-sending to the osd client's unsent list. Preserve the original order of requests in the process (previously re-queued requests were reversed in this process). Because they have already been sent, they will have lower tids than any request already present on the unsent list. Just below that, traverse the linger list in forward order as before, but add them to the *tail* of the list rather than the head. These requests get re-registered, and in the process are give a new (higher) tid, so the should go at the end. This partially resolves: http://tracker.ceph.com/issues/4392 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-off-by: Sage Weil <sage@inktank.com>
2013-03-25 23:16:11 +00:00
/*
* Linger requests are re-registered before sending, which
* sets up a new tid for each. We add them to the unsent
* list at the end to keep things in tid order.
*/
list_for_each_entry_safe(req, nreq, &osd->o_linger_requests,
r_linger_osd) {
/*
* reregister request prior to unregistering linger so
* that r_osd is preserved.
*/
BUG_ON(!list_empty(&req->r_req_lru_item));
__register_request(osdc, req);
libceph: requeue only sent requests when kicking The osd expects incoming requests for a given object from a given client to arrive in order, with the tid for each request being greater than the tid for requests that have already arrived. This patch fixes two places the osd client might not maintain that ordering. For the osd client, the connection fault method is osd_reset(). That function calls __reset_osd() to close and re-open the connection, then calls __kick_osd_requests() to cause all outstanding requests for the affected osd to be re-sent after the connection has been re-established. When an osd is reset, any in-flight messages will need to be re-sent. An osd client maintains distinct lists for unsent and in-flight messages. Meanwhile, an osd maintains a single list of all its requests (both sent and un-sent). (Each message is linked into two lists--one for the osd client and one list for the osd.) To process an osd "kick" operation, the request list for the *osd* is traversed, and each request is moved off whichever osd *client* list it was on (unsent or sent) and placed onto the osd client's unsent list. (It remains where it is on the osd's request list.) When that is done, osd_reset() calls __send_queued() to cause each of the osd client's unsent messages to be sent. OK, with that background... As the osd request list is traversed each request is prepended to the osd client's unsent list in the order they're seen. The effect of this is to reverse the order of these requests as they are put (back) onto the unsent list. Instead, build up a list of only the requests for an osd that have already been sent (by checking their r_sent flag values). Once an unsent request is found, stop examining requests and prepend the requests that need re-sending to the osd client's unsent list. Preserve the original order of requests in the process (previously re-queued requests were reversed in this process). Because they have already been sent, they will have lower tids than any request already present on the unsent list. Just below that, traverse the linger list in forward order as before, but add them to the *tail* of the list rather than the head. These requests get re-registered, and in the process are give a new (higher) tid, so the should go at the end. This partially resolves: http://tracker.ceph.com/issues/4392 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-off-by: Sage Weil <sage@inktank.com>
2013-03-25 23:16:11 +00:00
list_add_tail(&req->r_req_lru_item, &osdc->req_unsent);
list_add_tail(&req->r_osd_item, &req->r_osd->o_requests);
__unregister_linger_request(osdc, req);
dout("requeued lingering %p tid %llu osd%d\n", req, req->r_tid,
osd->o_osd);
}
}
/*
* If the osd connection drops, we need to resubmit all requests.
*/
static void osd_reset(struct ceph_connection *con)
{
struct ceph_osd *osd = con->private;
struct ceph_osd_client *osdc;
if (!osd)
return;
dout("osd_reset osd%d\n", osd->o_osd);
osdc = osd->o_osdc;
down_read(&osdc->map_sem);
mutex_lock(&osdc->request_mutex);
__kick_osd_requests(osdc, osd);
__send_queued(osdc);
mutex_unlock(&osdc->request_mutex);
up_read(&osdc->map_sem);
}
/*
* Track open sessions with osds.
*/
static struct ceph_osd *create_osd(struct ceph_osd_client *osdc, int onum)
{
struct ceph_osd *osd;
osd = kzalloc(sizeof(*osd), GFP_NOFS);
if (!osd)
return NULL;
atomic_set(&osd->o_ref, 1);
osd->o_osdc = osdc;
osd->o_osd = onum;
RB_CLEAR_NODE(&osd->o_node);
INIT_LIST_HEAD(&osd->o_requests);
INIT_LIST_HEAD(&osd->o_linger_requests);
INIT_LIST_HEAD(&osd->o_osd_lru);
osd->o_incarnation = 1;
ceph_con_init(&osd->o_con, osd, &osd_con_ops, &osdc->client->msgr);
INIT_LIST_HEAD(&osd->o_keepalive_item);
return osd;
}
static struct ceph_osd *get_osd(struct ceph_osd *osd)
{
if (atomic_inc_not_zero(&osd->o_ref)) {
dout("get_osd %p %d -> %d\n", osd, atomic_read(&osd->o_ref)-1,
atomic_read(&osd->o_ref));
return osd;
} else {
dout("get_osd %p FAIL\n", osd);
return NULL;
}
}
static void put_osd(struct ceph_osd *osd)
{
dout("put_osd %p %d -> %d\n", osd, atomic_read(&osd->o_ref),
atomic_read(&osd->o_ref) - 1);
if (atomic_dec_and_test(&osd->o_ref) && osd->o_auth.authorizer) {
struct ceph_auth_client *ac = osd->o_osdc->client->monc.auth;
ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer);
kfree(osd);
}
}
/*
* remove an osd from our map
*/
static void __remove_osd(struct ceph_osd_client *osdc, struct ceph_osd *osd)
{
dout("__remove_osd %p\n", osd);
BUG_ON(!list_empty(&osd->o_requests));
rb_erase(&osd->o_node, &osdc->osds);
list_del_init(&osd->o_osd_lru);
ceph_con_close(&osd->o_con);
put_osd(osd);
}
static void remove_all_osds(struct ceph_osd_client *osdc)
{
dout("%s %p\n", __func__, osdc);
mutex_lock(&osdc->request_mutex);
while (!RB_EMPTY_ROOT(&osdc->osds)) {
struct ceph_osd *osd = rb_entry(rb_first(&osdc->osds),
struct ceph_osd, o_node);
__remove_osd(osdc, osd);
}
mutex_unlock(&osdc->request_mutex);
}
static void __move_osd_to_lru(struct ceph_osd_client *osdc,
struct ceph_osd *osd)
{
dout("__move_osd_to_lru %p\n", osd);
BUG_ON(!list_empty(&osd->o_osd_lru));
list_add_tail(&osd->o_osd_lru, &osdc->osd_lru);
osd->lru_ttl = jiffies + osdc->client->options->osd_idle_ttl * HZ;
}
static void __remove_osd_from_lru(struct ceph_osd *osd)
{
dout("__remove_osd_from_lru %p\n", osd);
if (!list_empty(&osd->o_osd_lru))
list_del_init(&osd->o_osd_lru);
}
static void remove_old_osds(struct ceph_osd_client *osdc)
{
struct ceph_osd *osd, *nosd;
dout("__remove_old_osds %p\n", osdc);
mutex_lock(&osdc->request_mutex);
list_for_each_entry_safe(osd, nosd, &osdc->osd_lru, o_osd_lru) {
if (time_before(jiffies, osd->lru_ttl))
break;
__remove_osd(osdc, osd);
}
mutex_unlock(&osdc->request_mutex);
}
/*
* reset osd connect
*/
static int __reset_osd(struct ceph_osd_client *osdc, struct ceph_osd *osd)
{
struct ceph_entity_addr *peer_addr;
dout("__reset_osd %p osd%d\n", osd, osd->o_osd);
if (list_empty(&osd->o_requests) &&
list_empty(&osd->o_linger_requests)) {
__remove_osd(osdc, osd);
return -ENODEV;
}
peer_addr = &osdc->osdmap->osd_addr[osd->o_osd];
if (!memcmp(peer_addr, &osd->o_con.peer_addr, sizeof (*peer_addr)) &&
!ceph_con_opened(&osd->o_con)) {
struct ceph_osd_request *req;
dout(" osd addr hasn't changed and connection never opened,"
" letting msgr retry");
/* touch each r_stamp for handle_timeout()'s benfit */
list_for_each_entry(req, &osd->o_requests, r_osd_item)
req->r_stamp = jiffies;
return -EAGAIN;
}
ceph_con_close(&osd->o_con);
ceph_con_open(&osd->o_con, CEPH_ENTITY_TYPE_OSD, osd->o_osd, peer_addr);
osd->o_incarnation++;
return 0;
}
static void __insert_osd(struct ceph_osd_client *osdc, struct ceph_osd *new)
{
struct rb_node **p = &osdc->osds.rb_node;
struct rb_node *parent = NULL;
struct ceph_osd *osd = NULL;
dout("__insert_osd %p osd%d\n", new, new->o_osd);
while (*p) {
parent = *p;
osd = rb_entry(parent, struct ceph_osd, o_node);
if (new->o_osd < osd->o_osd)
p = &(*p)->rb_left;
else if (new->o_osd > osd->o_osd)
p = &(*p)->rb_right;
else
BUG();
}
rb_link_node(&new->o_node, parent, p);
rb_insert_color(&new->o_node, &osdc->osds);
}
static struct ceph_osd *__lookup_osd(struct ceph_osd_client *osdc, int o)
{
struct ceph_osd *osd;
struct rb_node *n = osdc->osds.rb_node;
while (n) {
osd = rb_entry(n, struct ceph_osd, o_node);
if (o < osd->o_osd)
n = n->rb_left;
else if (o > osd->o_osd)
n = n->rb_right;
else
return osd;
}
return NULL;
}
static void __schedule_osd_timeout(struct ceph_osd_client *osdc)
{
schedule_delayed_work(&osdc->timeout_work,
osdc->client->options->osd_keepalive_timeout * HZ);
}
static void __cancel_osd_timeout(struct ceph_osd_client *osdc)
{
cancel_delayed_work(&osdc->timeout_work);
}
/*
* Register request, assign tid. If this is the first request, set up
* the timeout event.
*/
static void __register_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req)
{
req->r_tid = ++osdc->last_tid;
req->r_request->hdr.tid = cpu_to_le64(req->r_tid);
dout("__register_request %p tid %lld\n", req, req->r_tid);
__insert_request(osdc, req);
ceph_osdc_get_request(req);
osdc->num_requests++;
if (osdc->num_requests == 1) {
dout(" first request, scheduling timeout\n");
__schedule_osd_timeout(osdc);
}
}
/*
* called under osdc->request_mutex
*/
static void __unregister_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req)
{
if (RB_EMPTY_NODE(&req->r_node)) {
dout("__unregister_request %p tid %lld not registered\n",
req, req->r_tid);
return;
}
dout("__unregister_request %p tid %lld\n", req, req->r_tid);
rb_erase(&req->r_node, &osdc->requests);
osdc->num_requests--;
if (req->r_osd) {
/* make sure the original request isn't in flight. */
ceph_msg_revoke(req->r_request);
list_del_init(&req->r_osd_item);
if (list_empty(&req->r_osd->o_requests) &&
list_empty(&req->r_osd->o_linger_requests)) {
dout("moving osd to %p lru\n", req->r_osd);
__move_osd_to_lru(osdc, req->r_osd);
}
if (list_empty(&req->r_linger_item))
req->r_osd = NULL;
}
list_del_init(&req->r_req_lru_item);
ceph_osdc_put_request(req);
if (osdc->num_requests == 0) {
dout(" no requests, canceling timeout\n");
__cancel_osd_timeout(osdc);
}
}
/*
* Cancel a previously queued request message
*/
static void __cancel_request(struct ceph_osd_request *req)
{
if (req->r_sent && req->r_osd) {
ceph_msg_revoke(req->r_request);
req->r_sent = 0;
}
}
static void __register_linger_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req)
{
dout("__register_linger_request %p\n", req);
ceph_osdc_get_request(req);
list_add_tail(&req->r_linger_item, &osdc->req_linger);
if (req->r_osd)
list_add_tail(&req->r_linger_osd,
&req->r_osd->o_linger_requests);
}
static void __unregister_linger_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req)
{
dout("__unregister_linger_request %p\n", req);
list_del_init(&req->r_linger_item);
if (req->r_osd) {
list_del_init(&req->r_linger_osd);
if (list_empty(&req->r_osd->o_requests) &&
list_empty(&req->r_osd->o_linger_requests)) {
dout("moving osd to %p lru\n", req->r_osd);
__move_osd_to_lru(osdc, req->r_osd);
}
if (list_empty(&req->r_osd_item))
req->r_osd = NULL;
}
ceph_osdc_put_request(req);
}
void ceph_osdc_unregister_linger_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req)
{
mutex_lock(&osdc->request_mutex);
if (req->r_linger) {
req->r_linger = 0;
__unregister_linger_request(osdc, req);
}
mutex_unlock(&osdc->request_mutex);
}
EXPORT_SYMBOL(ceph_osdc_unregister_linger_request);
void ceph_osdc_set_request_linger(struct ceph_osd_client *osdc,
struct ceph_osd_request *req)
{
if (!req->r_linger) {
dout("set_request_linger %p\n", req);
req->r_linger = 1;
}
}
EXPORT_SYMBOL(ceph_osdc_set_request_linger);
2013-12-03 03:11:48 +00:00
/*
* Returns whether a request should be blocked from being sent
* based on the current osdmap and osd_client settings.
*
* Caller should hold map_sem for read.
*/
static bool __req_should_be_paused(struct ceph_osd_client *osdc,
struct ceph_osd_request *req)
{
bool pauserd = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD);
bool pausewr = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSEWR) ||
ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL);
return (req->r_flags & CEPH_OSD_FLAG_READ && pauserd) ||
(req->r_flags & CEPH_OSD_FLAG_WRITE && pausewr);
}
/*
* Pick an osd (the first 'up' osd in the pg), allocate the osd struct
* (as needed), and set the request r_osd appropriately. If there is
* no up osd, set r_osd to NULL. Move the request to the appropriate list
* (unsent, homeless) or leave on in-flight lru.
*
* Return 0 if unchanged, 1 if changed, or negative on error.
*
* Caller should hold map_sem for read and request_mutex.
*/
static int __map_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req, int force_resend)
{
struct ceph_pg pgid;
int acting[CEPH_PG_MAX_SIZE];
int o = -1, num = 0;
int err;
2013-12-03 03:11:48 +00:00
bool was_paused;
dout("map_request %p tid %lld\n", req, req->r_tid);
err = ceph_calc_ceph_pg(&pgid, req->r_oid, osdc->osdmap,
ceph_file_layout_pg_pool(req->r_file_layout));
if (err) {
list_move(&req->r_req_lru_item, &osdc->req_notarget);
return err;
}
req->r_pgid = pgid;
err = ceph_calc_pg_acting(osdc->osdmap, pgid, acting);
if (err > 0) {
o = acting[0];
num = err;
}
2013-12-03 03:11:48 +00:00
was_paused = req->r_paused;
req->r_paused = __req_should_be_paused(osdc, req);
if (was_paused && !req->r_paused)
force_resend = 1;
if ((!force_resend &&
req->r_osd && req->r_osd->o_osd == o &&
req->r_sent >= req->r_osd->o_incarnation &&
req->r_num_pg_osds == num &&
memcmp(req->r_pg_osds, acting, sizeof(acting[0])*num) == 0) ||
2013-12-03 03:11:48 +00:00
(req->r_osd == NULL && o == -1) ||
req->r_paused)
return 0; /* no change */
dout("map_request tid %llu pgid %lld.%x osd%d (was osd%d)\n",
req->r_tid, pgid.pool, pgid.seed, o,
req->r_osd ? req->r_osd->o_osd : -1);
/* record full pg acting set */
memcpy(req->r_pg_osds, acting, sizeof(acting[0]) * num);
req->r_num_pg_osds = num;
if (req->r_osd) {
__cancel_request(req);
list_del_init(&req->r_osd_item);
req->r_osd = NULL;
}
req->r_osd = __lookup_osd(osdc, o);
if (!req->r_osd && o >= 0) {
ceph: remove fragile __map_osds optimization We used to try to avoid freeing and then reallocating the osd struct. This is a bit fragile due to potential interactions with other references (beyond o_requests), and may be the cause of this crash: [120633.442358] BUG: unable to handle kernel NULL pointer dereference at (null) [120633.443292] IP: [<ffffffff812549b6>] rb_erase+0x11d/0x277 [120633.443292] PGD f7ff3067 PUD f7f53067 PMD 0 [120633.443292] Oops: 0000 [#1] PREEMPT SMP [120633.443292] last sysfs file: /sys/kernel/uevent_seqnum [120633.443292] CPU 1 [120633.443292] Modules linked in: ceph fan ac battery psmouse ehci_hcd ide_pci_generic ohci_hcd thermal processor button [120633.443292] Pid: 3023, comm: ceph-msgr/1 Not tainted 2.6.32-rc2 #12 H8SSL [120633.443292] RIP: 0010:[<ffffffff812549b6>] [<ffffffff812549b6>] rb_erase+0x11d/0x277 [120633.443292] RSP: 0018:ffff8800f7b13a50 EFLAGS: 00010246 [120633.443292] RAX: ffff880022907819 RBX: ffff880022907818 RCX: 0000000000000000 [120633.443292] RDX: ffff8800f7b13a80 RSI: ffff8800f587eb48 RDI: 0000000000000000 [120633.443292] RBP: ffff8800f7b13a60 R08: 0000000000000000 R09: 0000000000000004 [120633.443292] R10: 0000000000000000 R11: ffff8800c4441000 R12: ffff8800f587eb48 [120633.443292] R13: ffff8800f58eaa00 R14: ffff8800f413c000 R15: 0000000000000001 [120633.443292] FS: 00007fbef6e226e0(0000) GS:ffff880009200000(0000) knlGS:0000000000000000 [120633.443292] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [120633.443292] CR2: 0000000000000000 CR3: 00000000f7c53000 CR4: 00000000000006e0 [120633.443292] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [120633.443292] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [120633.443292] Process ceph-msgr/1 (pid: 3023, threadinfo ffff8800f7b12000, task ffff8800f5858b40) [120633.443292] Stack: [120633.443292] ffff8800f413c000 ffff8800f587e9c0 ffff8800f7b13a80 ffffffffa0098a86 [120633.443292] <0> 00000000000006f1 0000000000000000 ffff8800f7b13af0 ffffffffa009959b [120633.443292] <0> ffff8800f413c000 ffff880022a68400 ffff880022a68400 ffff8800f587e9c0 [120633.443292] Call Trace: [120633.443292] [<ffffffffa0098a86>] __remove_osd+0x4d/0xbc [ceph] [120633.443292] [<ffffffffa009959b>] __map_osds+0x199/0x4fa [ceph] [120633.443292] [<ffffffffa00999f4>] ? __send_request+0xf8/0x186 [ceph] [120633.443292] [<ffffffffa0099beb>] kick_requests+0x169/0x3cb [ceph] [120633.443292] [<ffffffffa009a8c1>] ceph_osdc_handle_map+0x370/0x522 [ceph] Since we're probably screwed anyway if a small kmalloc is failing, don't bother with trying to be clever here. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-26 17:37:33 +00:00
err = -ENOMEM;
req->r_osd = create_osd(osdc, o);
if (!req->r_osd) {
list_move(&req->r_req_lru_item, &osdc->req_notarget);
ceph: remove fragile __map_osds optimization We used to try to avoid freeing and then reallocating the osd struct. This is a bit fragile due to potential interactions with other references (beyond o_requests), and may be the cause of this crash: [120633.442358] BUG: unable to handle kernel NULL pointer dereference at (null) [120633.443292] IP: [<ffffffff812549b6>] rb_erase+0x11d/0x277 [120633.443292] PGD f7ff3067 PUD f7f53067 PMD 0 [120633.443292] Oops: 0000 [#1] PREEMPT SMP [120633.443292] last sysfs file: /sys/kernel/uevent_seqnum [120633.443292] CPU 1 [120633.443292] Modules linked in: ceph fan ac battery psmouse ehci_hcd ide_pci_generic ohci_hcd thermal processor button [120633.443292] Pid: 3023, comm: ceph-msgr/1 Not tainted 2.6.32-rc2 #12 H8SSL [120633.443292] RIP: 0010:[<ffffffff812549b6>] [<ffffffff812549b6>] rb_erase+0x11d/0x277 [120633.443292] RSP: 0018:ffff8800f7b13a50 EFLAGS: 00010246 [120633.443292] RAX: ffff880022907819 RBX: ffff880022907818 RCX: 0000000000000000 [120633.443292] RDX: ffff8800f7b13a80 RSI: ffff8800f587eb48 RDI: 0000000000000000 [120633.443292] RBP: ffff8800f7b13a60 R08: 0000000000000000 R09: 0000000000000004 [120633.443292] R10: 0000000000000000 R11: ffff8800c4441000 R12: ffff8800f587eb48 [120633.443292] R13: ffff8800f58eaa00 R14: ffff8800f413c000 R15: 0000000000000001 [120633.443292] FS: 00007fbef6e226e0(0000) GS:ffff880009200000(0000) knlGS:0000000000000000 [120633.443292] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [120633.443292] CR2: 0000000000000000 CR3: 00000000f7c53000 CR4: 00000000000006e0 [120633.443292] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [120633.443292] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [120633.443292] Process ceph-msgr/1 (pid: 3023, threadinfo ffff8800f7b12000, task ffff8800f5858b40) [120633.443292] Stack: [120633.443292] ffff8800f413c000 ffff8800f587e9c0 ffff8800f7b13a80 ffffffffa0098a86 [120633.443292] <0> 00000000000006f1 0000000000000000 ffff8800f7b13af0 ffffffffa009959b [120633.443292] <0> ffff8800f413c000 ffff880022a68400 ffff880022a68400 ffff8800f587e9c0 [120633.443292] Call Trace: [120633.443292] [<ffffffffa0098a86>] __remove_osd+0x4d/0xbc [ceph] [120633.443292] [<ffffffffa009959b>] __map_osds+0x199/0x4fa [ceph] [120633.443292] [<ffffffffa00999f4>] ? __send_request+0xf8/0x186 [ceph] [120633.443292] [<ffffffffa0099beb>] kick_requests+0x169/0x3cb [ceph] [120633.443292] [<ffffffffa009a8c1>] ceph_osdc_handle_map+0x370/0x522 [ceph] Since we're probably screwed anyway if a small kmalloc is failing, don't bother with trying to be clever here. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-26 17:37:33 +00:00
goto out;
}
dout("map_request osd %p is osd%d\n", req->r_osd, o);
__insert_osd(osdc, req->r_osd);
ceph_con_open(&req->r_osd->o_con,
CEPH_ENTITY_TYPE_OSD, o,
&osdc->osdmap->osd_addr[o]);
}
if (req->r_osd) {
__remove_osd_from_lru(req->r_osd);
list_add_tail(&req->r_osd_item, &req->r_osd->o_requests);
list_move_tail(&req->r_req_lru_item, &osdc->req_unsent);
} else {
list_move_tail(&req->r_req_lru_item, &osdc->req_notarget);
}
err = 1; /* osd or pg changed */
out:
return err;
}
/*
* caller should hold map_sem (for read) and request_mutex
*/
static void __send_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req)
{
void *p;
dout("send_request %p tid %llu to osd%d flags %d pg %lld.%x\n",
req, req->r_tid, req->r_osd->o_osd, req->r_flags,
(unsigned long long)req->r_pgid.pool, req->r_pgid.seed);
/* fill in message content that changes each time we send it */
put_unaligned_le32(osdc->osdmap->epoch, req->r_request_osdmap_epoch);
put_unaligned_le32(req->r_flags, req->r_request_flags);
put_unaligned_le64(req->r_pgid.pool, req->r_request_pool);
p = req->r_request_pgid;
ceph_encode_64(&p, req->r_pgid.pool);
ceph_encode_32(&p, req->r_pgid.seed);
put_unaligned_le64(1, req->r_request_attempts); /* FIXME */
memcpy(req->r_request_reassert_version, &req->r_reassert_version,
sizeof(req->r_reassert_version));
req->r_stamp = jiffies;
list_move_tail(&req->r_req_lru_item, &osdc->req_lru);
ceph_msg_get(req->r_request); /* send consumes a ref */
libceph: change how "safe" callback is used An osd request currently has two callbacks. They inform the initiator of the request when we've received confirmation for the target osd that a request was received, and when the osd indicates all changes described by the request are durable. The only time the second callback is used is in the ceph file system for a synchronous write. There's a race that makes some handling of this case unsafe. This patch addresses this problem. The error handling for this callback is also kind of gross, and this patch changes that as well. In ceph_sync_write(), if a safe callback is requested we want to add the request on the ceph inode's unsafe items list. Because items on this list must have their tid set (by ceph_osd_start_request()), the request added *after* the call to that function returns. The problem with this is that there's a race between starting the request and adding it to the unsafe items list; the request may already be complete before ceph_sync_write() even begins to put it on the list. To address this, we change the way the "safe" callback is used. Rather than just calling it when the request is "safe", we use it to notify the initiator the bounds (start and end) of the period during which the request is *unsafe*. So the initiator gets notified just before the request gets sent to the osd (when it is "unsafe"), and again when it's known the results are durable (it's no longer unsafe). The first call will get made in __send_request(), just before the request message gets sent to the messenger for the first time. That function is only called by __send_queued(), which is always called with the osd client's request mutex held. We then have this callback function insert the request on the ceph inode's unsafe list when we're told the request is unsafe. This will avoid the race because this call will be made under protection of the osd client's request mutex. It also nicely groups the setup and cleanup of the state associated with managing unsafe requests. The name of the "safe" callback field is changed to "unsafe" to better reflect its new purpose. It has a Boolean "unsafe" parameter to indicate whether the request is becoming unsafe or is now safe. Because the "msg" parameter wasn't used, we drop that. This resolves the original problem reportedin: http://tracker.ceph.com/issues/4706 Reported-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-04-15 16:20:42 +00:00
req->r_sent = req->r_osd->o_incarnation;
libceph: change how "safe" callback is used An osd request currently has two callbacks. They inform the initiator of the request when we've received confirmation for the target osd that a request was received, and when the osd indicates all changes described by the request are durable. The only time the second callback is used is in the ceph file system for a synchronous write. There's a race that makes some handling of this case unsafe. This patch addresses this problem. The error handling for this callback is also kind of gross, and this patch changes that as well. In ceph_sync_write(), if a safe callback is requested we want to add the request on the ceph inode's unsafe items list. Because items on this list must have their tid set (by ceph_osd_start_request()), the request added *after* the call to that function returns. The problem with this is that there's a race between starting the request and adding it to the unsafe items list; the request may already be complete before ceph_sync_write() even begins to put it on the list. To address this, we change the way the "safe" callback is used. Rather than just calling it when the request is "safe", we use it to notify the initiator the bounds (start and end) of the period during which the request is *unsafe*. So the initiator gets notified just before the request gets sent to the osd (when it is "unsafe"), and again when it's known the results are durable (it's no longer unsafe). The first call will get made in __send_request(), just before the request message gets sent to the messenger for the first time. That function is only called by __send_queued(), which is always called with the osd client's request mutex held. We then have this callback function insert the request on the ceph inode's unsafe list when we're told the request is unsafe. This will avoid the race because this call will be made under protection of the osd client's request mutex. It also nicely groups the setup and cleanup of the state associated with managing unsafe requests. The name of the "safe" callback field is changed to "unsafe" to better reflect its new purpose. It has a Boolean "unsafe" parameter to indicate whether the request is becoming unsafe or is now safe. Because the "msg" parameter wasn't used, we drop that. This resolves the original problem reportedin: http://tracker.ceph.com/issues/4706 Reported-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-04-15 16:20:42 +00:00
ceph_con_send(&req->r_osd->o_con, req->r_request);
}
/*
* Send any requests in the queue (req_unsent).
*/
static void __send_queued(struct ceph_osd_client *osdc)
{
struct ceph_osd_request *req, *tmp;
dout("__send_queued\n");
list_for_each_entry_safe(req, tmp, &osdc->req_unsent, r_req_lru_item)
__send_request(osdc, req);
}
/*
* Timeout callback, called every N seconds when 1 or more osd
* requests has been active for more than N seconds. When this
* happens, we ping all OSDs with requests who have timed out to
* ensure any communications channel reset is detected. Reset the
* request timeouts another N seconds in the future as we go.
* Reschedule the timeout event another N seconds in future (unless
* there are no open requests).
*/
static void handle_timeout(struct work_struct *work)
{
struct ceph_osd_client *osdc =
container_of(work, struct ceph_osd_client, timeout_work.work);
struct ceph_osd_request *req;
struct ceph_osd *osd;
unsigned long keepalive =
osdc->client->options->osd_keepalive_timeout * HZ;
struct list_head slow_osds;
dout("timeout\n");
down_read(&osdc->map_sem);
ceph_monc_request_next_osdmap(&osdc->client->monc);
mutex_lock(&osdc->request_mutex);
/*
* ping osds that are a bit slow. this ensures that if there
* is a break in the TCP connection we will notice, and reopen
* a connection with that osd (from the fault callback).
*/
INIT_LIST_HEAD(&slow_osds);
list_for_each_entry(req, &osdc->req_lru, r_req_lru_item) {
if (time_before(jiffies, req->r_stamp + keepalive))
break;
osd = req->r_osd;
BUG_ON(!osd);
dout(" tid %llu is slow, will send keepalive on osd%d\n",
req->r_tid, osd->o_osd);
list_move_tail(&osd->o_keepalive_item, &slow_osds);
}
while (!list_empty(&slow_osds)) {
osd = list_entry(slow_osds.next, struct ceph_osd,
o_keepalive_item);
list_del_init(&osd->o_keepalive_item);
ceph_con_keepalive(&osd->o_con);
}
__schedule_osd_timeout(osdc);
__send_queued(osdc);
mutex_unlock(&osdc->request_mutex);
up_read(&osdc->map_sem);
}
static void handle_osds_timeout(struct work_struct *work)
{
struct ceph_osd_client *osdc =
container_of(work, struct ceph_osd_client,
osds_timeout_work.work);
unsigned long delay =
osdc->client->options->osd_idle_ttl * HZ >> 2;
dout("osds timeout\n");
down_read(&osdc->map_sem);
remove_old_osds(osdc);
up_read(&osdc->map_sem);
schedule_delayed_work(&osdc->osds_timeout_work,
round_jiffies_relative(delay));
}
static void complete_request(struct ceph_osd_request *req)
{
complete_all(&req->r_safe_completion); /* fsync waiter */
}
/*
* handle osd op reply. either call the callback if it is specified,
* or do the completion to wake up the waiting thread.
*/
static void handle_reply(struct ceph_osd_client *osdc, struct ceph_msg *msg,
struct ceph_connection *con)
{
void *p, *end;
struct ceph_osd_request *req;
u64 tid;
int object_len;
unsigned int numops;
int payload_len, flags;
s32 result;
s32 retry_attempt;
struct ceph_pg pg;
int err;
u32 reassert_epoch;
u64 reassert_version;
u32 osdmap_epoch;
int already_completed;
u32 bytes;
unsigned int i;
tid = le64_to_cpu(msg->hdr.tid);
dout("handle_reply %p tid %llu\n", msg, tid);
p = msg->front.iov_base;
end = p + msg->front.iov_len;
ceph_decode_need(&p, end, 4, bad);
object_len = ceph_decode_32(&p);
ceph_decode_need(&p, end, object_len, bad);
p += object_len;
err = ceph_decode_pgid(&p, end, &pg);
if (err)
goto bad;
ceph_decode_need(&p, end, 8 + 4 + 4 + 8 + 4, bad);
flags = ceph_decode_64(&p);
result = ceph_decode_32(&p);
reassert_epoch = ceph_decode_32(&p);
reassert_version = ceph_decode_64(&p);
osdmap_epoch = ceph_decode_32(&p);
/* lookup */
mutex_lock(&osdc->request_mutex);
req = __lookup_request(osdc, tid);
if (req == NULL) {
dout("handle_reply tid %llu dne\n", tid);
goto bad_mutex;
}
ceph_osdc_get_request(req);
dout("handle_reply %p tid %llu req %p result %d\n", msg, tid,
req, result);
ceph_decode_need(&p, end, 4, bad_put);
numops = ceph_decode_32(&p);
if (numops > CEPH_OSD_MAX_OP)
goto bad_put;
if (numops != req->r_num_ops)
goto bad_put;
payload_len = 0;
ceph_decode_need(&p, end, numops * sizeof(struct ceph_osd_op), bad_put);
for (i = 0; i < numops; i++) {
struct ceph_osd_op *op = p;
int len;
len = le32_to_cpu(op->payload_len);
req->r_reply_op_len[i] = len;
dout(" op %d has %d bytes\n", i, len);
payload_len += len;
p += sizeof(*op);
}
bytes = le32_to_cpu(msg->hdr.data_len);
if (payload_len != bytes) {
pr_warning("sum of op payload lens %d != data_len %d",
payload_len, bytes);
goto bad_put;
}
ceph_decode_need(&p, end, 4 + numops * 4, bad_put);
retry_attempt = ceph_decode_32(&p);
for (i = 0; i < numops; i++)
req->r_reply_op_result[i] = ceph_decode_32(&p);
already_completed = req->r_got_reply;
if (!req->r_got_reply) {
req->r_result = result;
dout("handle_reply result %d bytes %d\n", req->r_result,
bytes);
if (req->r_result == 0)
req->r_result = bytes;
/* in case this is a write and we need to replay, */
req->r_reassert_version.epoch = cpu_to_le32(reassert_epoch);
req->r_reassert_version.version = cpu_to_le64(reassert_version);
req->r_got_reply = 1;
} else if ((flags & CEPH_OSD_FLAG_ONDISK) == 0) {
dout("handle_reply tid %llu dup ack\n", tid);
mutex_unlock(&osdc->request_mutex);
goto done;
}
dout("handle_reply tid %llu flags %d\n", tid, flags);
if (req->r_linger && (flags & CEPH_OSD_FLAG_ONDISK))
__register_linger_request(osdc, req);
/* either this is a read, or we got the safe response */
if (result < 0 ||
(flags & CEPH_OSD_FLAG_ONDISK) ||
((flags & CEPH_OSD_FLAG_WRITE) == 0))
__unregister_request(osdc, req);
mutex_unlock(&osdc->request_mutex);
if (!already_completed) {
if (req->r_unsafe_callback &&
result >= 0 && !(flags & CEPH_OSD_FLAG_ONDISK))
req->r_unsafe_callback(req, true);
if (req->r_callback)
req->r_callback(req, msg);
else
complete_all(&req->r_completion);
}
if (flags & CEPH_OSD_FLAG_ONDISK) {
if (req->r_unsafe_callback && already_completed)
req->r_unsafe_callback(req, false);
complete_request(req);
}
done:
dout("req=%p req->r_linger=%d\n", req, req->r_linger);
ceph_osdc_put_request(req);
return;
bad_put:
req->r_result = -EIO;
__unregister_request(osdc, req);
if (req->r_callback)
req->r_callback(req, msg);
else
complete_all(&req->r_completion);
complete_request(req);
ceph_osdc_put_request(req);
bad_mutex:
mutex_unlock(&osdc->request_mutex);
bad:
pr_err("corrupt osd_op_reply got %d %d\n",
(int)msg->front.iov_len, le32_to_cpu(msg->hdr.front_len));
ceph_msg_dump(msg);
}
static void reset_changed_osds(struct ceph_osd_client *osdc)
{
struct rb_node *p, *n;
for (p = rb_first(&osdc->osds); p; p = n) {
struct ceph_osd *osd = rb_entry(p, struct ceph_osd, o_node);
n = rb_next(p);
if (!ceph_osd_is_up(osdc->osdmap, osd->o_osd) ||
memcmp(&osd->o_con.peer_addr,
ceph_osd_addr(osdc->osdmap,
osd->o_osd),
sizeof(struct ceph_entity_addr)) != 0)
__reset_osd(osdc, osd);
}
}
/*
* Requeue requests whose mapping to an OSD has changed. If requests map to
* no osd, request a new map.
*
* Caller should hold map_sem for read.
*/
static void kick_requests(struct ceph_osd_client *osdc, bool force_resend,
bool force_resend_writes)
{
struct ceph_osd_request *req, *nreq;
struct rb_node *p;
int needmap = 0;
int err;
bool force_resend_req;
dout("kick_requests %s %s\n", force_resend ? " (force resend)" : "",
force_resend_writes ? " (force resend writes)" : "");
mutex_lock(&osdc->request_mutex);
for (p = rb_first(&osdc->requests); p; ) {
req = rb_entry(p, struct ceph_osd_request, r_node);
p = rb_next(p);
libceph: move linger requests sooner in kick_requests() The kick_requests() function is called by ceph_osdc_handle_map() when an osd map change has been indicated. Its purpose is to re-queue any request whose target osd is different from what it was when it was originally sent. It is structured as two loops, one for incomplete but registered requests, and a second for handling completed linger requests. As a special case, in the first loop if a request marked to linger has not yet completed, it is moved from the request list to the linger list. This is as a quick and dirty way to have the second loop handle sending the request along with all the other linger requests. Because of the way it's done now, however, this quick and dirty solution can result in these incomplete linger requests never getting re-sent as desired. The problem lies in the fact that the second loop only arranges for a linger request to be sent if it appears its target osd has changed. This is the proper handling for *completed* linger requests (it avoids issuing the same linger request twice to the same osd). But although the linger requests added to the list in the first loop may have been sent, they have not yet completed, so they need to be re-sent regardless of whether their target osd has changed. The first required fix is we need to avoid calling __map_request() on any incomplete linger request. Otherwise the subsequent __map_request() call in the second loop will find the target osd has not changed and will therefore not re-send the request. Second, we need to be sure that a sent but incomplete linger request gets re-sent. If the target osd is the same with the new osd map as it was when the request was originally sent, this won't happen. This can be fixed through careful handling when we move these requests from the request list to the linger list, by unregistering the request *before* it is registered as a linger request. This works because a side-effect of unregistering the request is to make the request's r_osd pointer be NULL, and *that* will ensure the second loop actually re-sends the linger request. Processing of such a request is done at that point, so continue with the next one once it's been moved. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-19 21:52:36 +00:00
/*
* For linger requests that have not yet been
* registered, move them to the linger list; they'll
* be sent to the osd in the loop below. Unregister
* the request before re-registering it as a linger
* request to ensure the __map_request() below
* will decide it needs to be sent.
*/
if (req->r_linger && list_empty(&req->r_linger_item)) {
dout("%p tid %llu restart on osd%d\n",
req, req->r_tid,
req->r_osd ? req->r_osd->o_osd : -1);
ceph_osdc_get_request(req);
libceph: move linger requests sooner in kick_requests() The kick_requests() function is called by ceph_osdc_handle_map() when an osd map change has been indicated. Its purpose is to re-queue any request whose target osd is different from what it was when it was originally sent. It is structured as two loops, one for incomplete but registered requests, and a second for handling completed linger requests. As a special case, in the first loop if a request marked to linger has not yet completed, it is moved from the request list to the linger list. This is as a quick and dirty way to have the second loop handle sending the request along with all the other linger requests. Because of the way it's done now, however, this quick and dirty solution can result in these incomplete linger requests never getting re-sent as desired. The problem lies in the fact that the second loop only arranges for a linger request to be sent if it appears its target osd has changed. This is the proper handling for *completed* linger requests (it avoids issuing the same linger request twice to the same osd). But although the linger requests added to the list in the first loop may have been sent, they have not yet completed, so they need to be re-sent regardless of whether their target osd has changed. The first required fix is we need to avoid calling __map_request() on any incomplete linger request. Otherwise the subsequent __map_request() call in the second loop will find the target osd has not changed and will therefore not re-send the request. Second, we need to be sure that a sent but incomplete linger request gets re-sent. If the target osd is the same with the new osd map as it was when the request was originally sent, this won't happen. This can be fixed through careful handling when we move these requests from the request list to the linger list, by unregistering the request *before* it is registered as a linger request. This works because a side-effect of unregistering the request is to make the request's r_osd pointer be NULL, and *that* will ensure the second loop actually re-sends the linger request. Processing of such a request is done at that point, so continue with the next one once it's been moved. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-19 21:52:36 +00:00
__unregister_request(osdc, req);
__register_linger_request(osdc, req);
ceph_osdc_put_request(req);
libceph: move linger requests sooner in kick_requests() The kick_requests() function is called by ceph_osdc_handle_map() when an osd map change has been indicated. Its purpose is to re-queue any request whose target osd is different from what it was when it was originally sent. It is structured as two loops, one for incomplete but registered requests, and a second for handling completed linger requests. As a special case, in the first loop if a request marked to linger has not yet completed, it is moved from the request list to the linger list. This is as a quick and dirty way to have the second loop handle sending the request along with all the other linger requests. Because of the way it's done now, however, this quick and dirty solution can result in these incomplete linger requests never getting re-sent as desired. The problem lies in the fact that the second loop only arranges for a linger request to be sent if it appears its target osd has changed. This is the proper handling for *completed* linger requests (it avoids issuing the same linger request twice to the same osd). But although the linger requests added to the list in the first loop may have been sent, they have not yet completed, so they need to be re-sent regardless of whether their target osd has changed. The first required fix is we need to avoid calling __map_request() on any incomplete linger request. Otherwise the subsequent __map_request() call in the second loop will find the target osd has not changed and will therefore not re-send the request. Second, we need to be sure that a sent but incomplete linger request gets re-sent. If the target osd is the same with the new osd map as it was when the request was originally sent, this won't happen. This can be fixed through careful handling when we move these requests from the request list to the linger list, by unregistering the request *before* it is registered as a linger request. This works because a side-effect of unregistering the request is to make the request's r_osd pointer be NULL, and *that* will ensure the second loop actually re-sends the linger request. Processing of such a request is done at that point, so continue with the next one once it's been moved. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-19 21:52:36 +00:00
continue;
}
force_resend_req = force_resend ||
(force_resend_writes &&
req->r_flags & CEPH_OSD_FLAG_WRITE);
err = __map_request(osdc, req, force_resend_req);
if (err < 0)
continue; /* error */
if (req->r_osd == NULL) {
dout("%p tid %llu maps to no osd\n", req, req->r_tid);
needmap++; /* request a newer map */
} else if (err > 0) {
if (!req->r_linger) {
dout("%p tid %llu requeued on osd%d\n", req,
req->r_tid,
req->r_osd ? req->r_osd->o_osd : -1);
req->r_flags |= CEPH_OSD_FLAG_RETRY;
}
}
}
list_for_each_entry_safe(req, nreq, &osdc->req_linger,
r_linger_item) {
dout("linger req=%p req->r_osd=%p\n", req, req->r_osd);
err = __map_request(osdc, req,
force_resend || force_resend_writes);
libceph: move linger requests sooner in kick_requests() The kick_requests() function is called by ceph_osdc_handle_map() when an osd map change has been indicated. Its purpose is to re-queue any request whose target osd is different from what it was when it was originally sent. It is structured as two loops, one for incomplete but registered requests, and a second for handling completed linger requests. As a special case, in the first loop if a request marked to linger has not yet completed, it is moved from the request list to the linger list. This is as a quick and dirty way to have the second loop handle sending the request along with all the other linger requests. Because of the way it's done now, however, this quick and dirty solution can result in these incomplete linger requests never getting re-sent as desired. The problem lies in the fact that the second loop only arranges for a linger request to be sent if it appears its target osd has changed. This is the proper handling for *completed* linger requests (it avoids issuing the same linger request twice to the same osd). But although the linger requests added to the list in the first loop may have been sent, they have not yet completed, so they need to be re-sent regardless of whether their target osd has changed. The first required fix is we need to avoid calling __map_request() on any incomplete linger request. Otherwise the subsequent __map_request() call in the second loop will find the target osd has not changed and will therefore not re-send the request. Second, we need to be sure that a sent but incomplete linger request gets re-sent. If the target osd is the same with the new osd map as it was when the request was originally sent, this won't happen. This can be fixed through careful handling when we move these requests from the request list to the linger list, by unregistering the request *before* it is registered as a linger request. This works because a side-effect of unregistering the request is to make the request's r_osd pointer be NULL, and *that* will ensure the second loop actually re-sends the linger request. Processing of such a request is done at that point, so continue with the next one once it's been moved. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-19 21:52:36 +00:00
dout("__map_request returned %d\n", err);
if (err == 0)
continue; /* no change and no osd was specified */
if (err < 0)
continue; /* hrm! */
if (req->r_osd == NULL) {
dout("tid %llu maps to no valid osd\n", req->r_tid);
needmap++; /* request a newer map */
continue;
}
dout("kicking lingering %p tid %llu osd%d\n", req, req->r_tid,
req->r_osd ? req->r_osd->o_osd : -1);
__register_request(osdc, req);
__unregister_linger_request(osdc, req);
}
reset_changed_osds(osdc);
mutex_unlock(&osdc->request_mutex);
if (needmap) {
dout("%d requests for down osds, need new map\n", needmap);
ceph_monc_request_next_osdmap(&osdc->client->monc);
}
}
/*
* Process updated osd map.
*
* The message contains any number of incremental and full maps, normally
* indicating some sort of topology change in the cluster. Kick requests
* off to different OSDs as needed.
*/
void ceph_osdc_handle_map(struct ceph_osd_client *osdc, struct ceph_msg *msg)
{
void *p, *end, *next;
u32 nr_maps, maplen;
u32 epoch;
struct ceph_osdmap *newmap = NULL, *oldmap;
int err;
struct ceph_fsid fsid;
bool was_full;
dout("handle_map have %u\n", osdc->osdmap ? osdc->osdmap->epoch : 0);
p = msg->front.iov_base;
end = p + msg->front.iov_len;
/* verify fsid */
ceph_decode_need(&p, end, sizeof(fsid), bad);
ceph_decode_copy(&p, &fsid, sizeof(fsid));
if (ceph_check_fsid(osdc->client, &fsid) < 0)
return;
down_write(&osdc->map_sem);
was_full = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL);
/* incremental maps */
ceph_decode_32_safe(&p, end, nr_maps, bad);
dout(" %d inc maps\n", nr_maps);
while (nr_maps > 0) {
ceph_decode_need(&p, end, 2*sizeof(u32), bad);
epoch = ceph_decode_32(&p);
maplen = ceph_decode_32(&p);
ceph_decode_need(&p, end, maplen, bad);
next = p + maplen;
if (osdc->osdmap && osdc->osdmap->epoch+1 == epoch) {
dout("applying incremental map %u len %d\n",
epoch, maplen);
newmap = osdmap_apply_incremental(&p, next,
osdc->osdmap,
&osdc->client->msgr);
if (IS_ERR(newmap)) {
err = PTR_ERR(newmap);
goto bad;
}
BUG_ON(!newmap);
if (newmap != osdc->osdmap) {
ceph_osdmap_destroy(osdc->osdmap);
osdc->osdmap = newmap;
}
was_full = was_full ||
ceph_osdmap_flag(osdc->osdmap,
CEPH_OSDMAP_FULL);
kick_requests(osdc, 0, was_full);
} else {
dout("ignoring incremental map %u len %d\n",
epoch, maplen);
}
p = next;
nr_maps--;
}
if (newmap)
goto done;
/* full maps */
ceph_decode_32_safe(&p, end, nr_maps, bad);
dout(" %d full maps\n", nr_maps);
while (nr_maps) {
ceph_decode_need(&p, end, 2*sizeof(u32), bad);
epoch = ceph_decode_32(&p);
maplen = ceph_decode_32(&p);
ceph_decode_need(&p, end, maplen, bad);
if (nr_maps > 1) {
dout("skipping non-latest full map %u len %d\n",
epoch, maplen);
} else if (osdc->osdmap && osdc->osdmap->epoch >= epoch) {
dout("skipping full map %u len %d, "
"older than our %u\n", epoch, maplen,
osdc->osdmap->epoch);
} else {
int skipped_map = 0;
dout("taking full map %u len %d\n", epoch, maplen);
newmap = osdmap_decode(&p, p+maplen);
if (IS_ERR(newmap)) {
err = PTR_ERR(newmap);
goto bad;
}
BUG_ON(!newmap);
oldmap = osdc->osdmap;
osdc->osdmap = newmap;
if (oldmap) {
if (oldmap->epoch + 1 < newmap->epoch)
skipped_map = 1;
ceph_osdmap_destroy(oldmap);
}
was_full = was_full ||
ceph_osdmap_flag(osdc->osdmap,
CEPH_OSDMAP_FULL);
kick_requests(osdc, skipped_map, was_full);
}
p += maplen;
nr_maps--;
}
if (!osdc->osdmap)
goto bad;
done:
downgrade_write(&osdc->map_sem);
ceph_monc_got_osdmap(&osdc->client->monc, osdc->osdmap->epoch);
/*
* subscribe to subsequent osdmap updates if full to ensure
* we find out when we are no longer full and stop returning
* ENOSPC.
*/
2013-12-03 03:11:48 +00:00
if (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL) ||
ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD) ||
ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSEWR))
ceph_monc_request_next_osdmap(&osdc->client->monc);
mutex_lock(&osdc->request_mutex);
__send_queued(osdc);
mutex_unlock(&osdc->request_mutex);
up_read(&osdc->map_sem);
wake_up_all(&osdc->client->auth_wq);
return;
bad:
pr_err("osdc handle_map corrupt msg\n");
ceph_msg_dump(msg);
up_write(&osdc->map_sem);
return;
}
/*
* watch/notify callback event infrastructure
*
* These callbacks are used both for watch and notify operations.
*/
static void __release_event(struct kref *kref)
{
struct ceph_osd_event *event =
container_of(kref, struct ceph_osd_event, kref);
dout("__release_event %p\n", event);
kfree(event);
}
static void get_event(struct ceph_osd_event *event)
{
kref_get(&event->kref);
}
void ceph_osdc_put_event(struct ceph_osd_event *event)
{
kref_put(&event->kref, __release_event);
}
EXPORT_SYMBOL(ceph_osdc_put_event);
static void __insert_event(struct ceph_osd_client *osdc,
struct ceph_osd_event *new)
{
struct rb_node **p = &osdc->event_tree.rb_node;
struct rb_node *parent = NULL;
struct ceph_osd_event *event = NULL;
while (*p) {
parent = *p;
event = rb_entry(parent, struct ceph_osd_event, node);
if (new->cookie < event->cookie)
p = &(*p)->rb_left;
else if (new->cookie > event->cookie)
p = &(*p)->rb_right;
else
BUG();
}
rb_link_node(&new->node, parent, p);
rb_insert_color(&new->node, &osdc->event_tree);
}
static struct ceph_osd_event *__find_event(struct ceph_osd_client *osdc,
u64 cookie)
{
struct rb_node **p = &osdc->event_tree.rb_node;
struct rb_node *parent = NULL;
struct ceph_osd_event *event = NULL;
while (*p) {
parent = *p;
event = rb_entry(parent, struct ceph_osd_event, node);
if (cookie < event->cookie)
p = &(*p)->rb_left;
else if (cookie > event->cookie)
p = &(*p)->rb_right;
else
return event;
}
return NULL;
}
static void __remove_event(struct ceph_osd_event *event)
{
struct ceph_osd_client *osdc = event->osdc;
if (!RB_EMPTY_NODE(&event->node)) {
dout("__remove_event removed %p\n", event);
rb_erase(&event->node, &osdc->event_tree);
ceph_osdc_put_event(event);
} else {
dout("__remove_event didn't remove %p\n", event);
}
}
int ceph_osdc_create_event(struct ceph_osd_client *osdc,
void (*event_cb)(u64, u64, u8, void *),
void *data, struct ceph_osd_event **pevent)
{
struct ceph_osd_event *event;
event = kmalloc(sizeof(*event), GFP_NOIO);
if (!event)
return -ENOMEM;
dout("create_event %p\n", event);
event->cb = event_cb;
event->one_shot = 0;
event->data = data;
event->osdc = osdc;
INIT_LIST_HEAD(&event->osd_node);
RB_CLEAR_NODE(&event->node);
kref_init(&event->kref); /* one ref for us */
kref_get(&event->kref); /* one ref for the caller */
spin_lock(&osdc->event_lock);
event->cookie = ++osdc->event_count;
__insert_event(osdc, event);
spin_unlock(&osdc->event_lock);
*pevent = event;
return 0;
}
EXPORT_SYMBOL(ceph_osdc_create_event);
void ceph_osdc_cancel_event(struct ceph_osd_event *event)
{
struct ceph_osd_client *osdc = event->osdc;
dout("cancel_event %p\n", event);
spin_lock(&osdc->event_lock);
__remove_event(event);
spin_unlock(&osdc->event_lock);
ceph_osdc_put_event(event); /* caller's */
}
EXPORT_SYMBOL(ceph_osdc_cancel_event);
static void do_event_work(struct work_struct *work)
{
struct ceph_osd_event_work *event_work =
container_of(work, struct ceph_osd_event_work, work);
struct ceph_osd_event *event = event_work->event;
u64 ver = event_work->ver;
u64 notify_id = event_work->notify_id;
u8 opcode = event_work->opcode;
dout("do_event_work completing %p\n", event);
event->cb(ver, notify_id, opcode, event->data);
dout("do_event_work completed %p\n", event);
ceph_osdc_put_event(event);
kfree(event_work);
}
/*
* Process osd watch notifications
*/
static void handle_watch_notify(struct ceph_osd_client *osdc,
struct ceph_msg *msg)
{
void *p, *end;
u8 proto_ver;
u64 cookie, ver, notify_id;
u8 opcode;
struct ceph_osd_event *event;
struct ceph_osd_event_work *event_work;
p = msg->front.iov_base;
end = p + msg->front.iov_len;
ceph_decode_8_safe(&p, end, proto_ver, bad);
ceph_decode_8_safe(&p, end, opcode, bad);
ceph_decode_64_safe(&p, end, cookie, bad);
ceph_decode_64_safe(&p, end, ver, bad);
ceph_decode_64_safe(&p, end, notify_id, bad);
spin_lock(&osdc->event_lock);
event = __find_event(osdc, cookie);
if (event) {
BUG_ON(event->one_shot);
get_event(event);
}
spin_unlock(&osdc->event_lock);
dout("handle_watch_notify cookie %lld ver %lld event %p\n",
cookie, ver, event);
if (event) {
event_work = kmalloc(sizeof(*event_work), GFP_NOIO);
if (!event_work) {
dout("ERROR: could not allocate event_work\n");
goto done_err;
}
INIT_WORK(&event_work->work, do_event_work);
event_work->event = event;
event_work->ver = ver;
event_work->notify_id = notify_id;
event_work->opcode = opcode;
if (!queue_work(osdc->notify_wq, &event_work->work)) {
dout("WARNING: failed to queue notify event work\n");
goto done_err;
}
}
return;
done_err:
ceph_osdc_put_event(event);
return;
bad:
pr_err("osdc handle_watch_notify corrupt msg\n");
return;
}
/*
* build new request AND message
*
*/
void ceph_osdc_build_request(struct ceph_osd_request *req, u64 off,
struct ceph_snap_context *snapc, u64 snap_id,
struct timespec *mtime)
{
struct ceph_msg *msg = req->r_request;
void *p;
size_t msg_size;
int flags = req->r_flags;
u64 data_len;
unsigned int i;
req->r_snapid = snap_id;
req->r_snapc = ceph_get_snap_context(snapc);
/* encode request */
msg->hdr.version = cpu_to_le16(4);
p = msg->front.iov_base;
ceph_encode_32(&p, 1); /* client_inc is always 1 */
req->r_request_osdmap_epoch = p;
p += 4;
req->r_request_flags = p;
p += 4;
if (req->r_flags & CEPH_OSD_FLAG_WRITE)
ceph_encode_timespec(p, mtime);
p += sizeof(struct ceph_timespec);
req->r_request_reassert_version = p;
p += sizeof(struct ceph_eversion); /* will get filled in */
/* oloc */
ceph_encode_8(&p, 4);
ceph_encode_8(&p, 4);
ceph_encode_32(&p, 8 + 4 + 4);
req->r_request_pool = p;
p += 8;
ceph_encode_32(&p, -1); /* preferred */
ceph_encode_32(&p, 0); /* key len */
ceph_encode_8(&p, 1);
req->r_request_pgid = p;
p += 8 + 4;
ceph_encode_32(&p, -1); /* preferred */
/* oid */
ceph_encode_32(&p, req->r_oid_len);
memcpy(p, req->r_oid, req->r_oid_len);
dout("oid '%.*s' len %d\n", req->r_oid_len, req->r_oid, req->r_oid_len);
p += req->r_oid_len;
/* ops--can imply data */
ceph_encode_16(&p, (u16)req->r_num_ops);
data_len = 0;
for (i = 0; i < req->r_num_ops; i++) {
data_len += osd_req_encode_op(req, p, i);
p += sizeof(struct ceph_osd_op);
}
/* snaps */
ceph_encode_64(&p, req->r_snapid);
ceph_encode_64(&p, req->r_snapc ? req->r_snapc->seq : 0);
ceph_encode_32(&p, req->r_snapc ? req->r_snapc->num_snaps : 0);
if (req->r_snapc) {
for (i = 0; i < snapc->num_snaps; i++) {
ceph_encode_64(&p, req->r_snapc->snaps[i]);
}
}
req->r_request_attempts = p;
p += 4;
/* data */
if (flags & CEPH_OSD_FLAG_WRITE) {
u16 data_off;
/*
* The header "data_off" is a hint to the receiver
* allowing it to align received data into its
* buffers such that there's no need to re-copy
* it before writing it to disk (direct I/O).
*/
data_off = (u16) (off & 0xffff);
req->r_request->hdr.data_off = cpu_to_le16(data_off);
}
req->r_request->hdr.data_len = cpu_to_le32(data_len);
BUG_ON(p > msg->front.iov_base + msg->front.iov_len);
msg_size = p - msg->front.iov_base;
msg->front.iov_len = msg_size;
msg->hdr.front_len = cpu_to_le32(msg_size);
dout("build_request msg_size was %d\n", (int)msg_size);
}
EXPORT_SYMBOL(ceph_osdc_build_request);
/*
* Register request, send initial attempt.
*/
int ceph_osdc_start_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req,
bool nofail)
{
int rc = 0;
down_read(&osdc->map_sem);
mutex_lock(&osdc->request_mutex);
__register_request(osdc, req);
req->r_sent = 0;
req->r_got_reply = 0;
rc = __map_request(osdc, req, 0);
if (rc < 0) {
if (nofail) {
dout("osdc_start_request failed map, "
" will retry %lld\n", req->r_tid);
rc = 0;
} else {
__unregister_request(osdc, req);
}
goto out_unlock;
}
if (req->r_osd == NULL) {
dout("send_request %p no up osds in pg\n", req);
ceph_monc_request_next_osdmap(&osdc->client->monc);
} else {
__send_queued(osdc);
}
rc = 0;
out_unlock:
mutex_unlock(&osdc->request_mutex);
up_read(&osdc->map_sem);
return rc;
}
EXPORT_SYMBOL(ceph_osdc_start_request);
/*
* wait for a request to complete
*/
int ceph_osdc_wait_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req)
{
int rc;
rc = wait_for_completion_interruptible(&req->r_completion);
if (rc < 0) {
mutex_lock(&osdc->request_mutex);
__cancel_request(req);
__unregister_request(osdc, req);
mutex_unlock(&osdc->request_mutex);
complete_request(req);
dout("wait_request tid %llu canceled/timed out\n", req->r_tid);
return rc;
}
dout("wait_request tid %llu result %d\n", req->r_tid, req->r_result);
return req->r_result;
}
EXPORT_SYMBOL(ceph_osdc_wait_request);
/*
* sync - wait for all in-flight requests to flush. avoid starvation.
*/
void ceph_osdc_sync(struct ceph_osd_client *osdc)
{
struct ceph_osd_request *req;
u64 last_tid, next_tid = 0;
mutex_lock(&osdc->request_mutex);
last_tid = osdc->last_tid;
while (1) {
req = __lookup_request_ge(osdc, next_tid);
if (!req)
break;
if (req->r_tid > last_tid)
break;
next_tid = req->r_tid + 1;
if ((req->r_flags & CEPH_OSD_FLAG_WRITE) == 0)
continue;
ceph_osdc_get_request(req);
mutex_unlock(&osdc->request_mutex);
dout("sync waiting on tid %llu (last is %llu)\n",
req->r_tid, last_tid);
wait_for_completion(&req->r_safe_completion);
mutex_lock(&osdc->request_mutex);
ceph_osdc_put_request(req);
}
mutex_unlock(&osdc->request_mutex);
dout("sync done (thru tid %llu)\n", last_tid);
}
EXPORT_SYMBOL(ceph_osdc_sync);
/*
* Call all pending notify callbacks - for use after a watch is
* unregistered, to make sure no more callbacks for it will be invoked
*/
extern void ceph_osdc_flush_notifies(struct ceph_osd_client *osdc)
{
flush_workqueue(osdc->notify_wq);
}
EXPORT_SYMBOL(ceph_osdc_flush_notifies);
/*
* init, shutdown
*/
int ceph_osdc_init(struct ceph_osd_client *osdc, struct ceph_client *client)
{
int err;
dout("init\n");
osdc->client = client;
osdc->osdmap = NULL;
init_rwsem(&osdc->map_sem);
init_completion(&osdc->map_waiters);
osdc->last_requested_map = 0;
mutex_init(&osdc->request_mutex);
osdc->last_tid = 0;
osdc->osds = RB_ROOT;
INIT_LIST_HEAD(&osdc->osd_lru);
osdc->requests = RB_ROOT;
INIT_LIST_HEAD(&osdc->req_lru);
INIT_LIST_HEAD(&osdc->req_unsent);
INIT_LIST_HEAD(&osdc->req_notarget);
INIT_LIST_HEAD(&osdc->req_linger);
osdc->num_requests = 0;
INIT_DELAYED_WORK(&osdc->timeout_work, handle_timeout);
INIT_DELAYED_WORK(&osdc->osds_timeout_work, handle_osds_timeout);
spin_lock_init(&osdc->event_lock);
osdc->event_tree = RB_ROOT;
osdc->event_count = 0;
schedule_delayed_work(&osdc->osds_timeout_work,
round_jiffies_relative(osdc->client->options->osd_idle_ttl * HZ));
err = -ENOMEM;
osdc->req_mempool = mempool_create_kmalloc_pool(10,
sizeof(struct ceph_osd_request));
if (!osdc->req_mempool)
goto out;
err = ceph_msgpool_init(&osdc->msgpool_op, CEPH_MSG_OSD_OP,
OSD_OP_FRONT_LEN, 10, true,
"osd_op");
if (err < 0)
goto out_mempool;
err = ceph_msgpool_init(&osdc->msgpool_op_reply, CEPH_MSG_OSD_OPREPLY,
OSD_OPREPLY_FRONT_LEN, 10, true,
"osd_op_reply");
if (err < 0)
goto out_msgpool;
err = -ENOMEM;
osdc->notify_wq = create_singlethread_workqueue("ceph-watch-notify");
if (!osdc->notify_wq)
goto out_msgpool;
return 0;
out_msgpool:
ceph_msgpool_destroy(&osdc->msgpool_op);
out_mempool:
mempool_destroy(osdc->req_mempool);
out:
return err;
}
void ceph_osdc_stop(struct ceph_osd_client *osdc)
{
flush_workqueue(osdc->notify_wq);
destroy_workqueue(osdc->notify_wq);
cancel_delayed_work_sync(&osdc->timeout_work);
cancel_delayed_work_sync(&osdc->osds_timeout_work);
if (osdc->osdmap) {
ceph_osdmap_destroy(osdc->osdmap);
osdc->osdmap = NULL;
}
remove_all_osds(osdc);
mempool_destroy(osdc->req_mempool);
ceph_msgpool_destroy(&osdc->msgpool_op);
ceph_msgpool_destroy(&osdc->msgpool_op_reply);
}
/*
* Read some contiguous pages. If we cross a stripe boundary, shorten
* *plen. Return number of bytes read, or error.
*/
int ceph_osdc_readpages(struct ceph_osd_client *osdc,
struct ceph_vino vino, struct ceph_file_layout *layout,
u64 off, u64 *plen,
u32 truncate_seq, u64 truncate_size,
struct page **pages, int num_pages, int page_align)
{
struct ceph_osd_request *req;
int rc = 0;
dout("readpages on ino %llx.%llx on %llu~%llu\n", vino.ino,
vino.snap, off, *plen);
req = ceph_osdc_new_request(osdc, layout, vino, off, plen, 1,
CEPH_OSD_OP_READ, CEPH_OSD_FLAG_READ,
NULL, truncate_seq, truncate_size,
false);
if (IS_ERR(req))
return PTR_ERR(req);
/* it may be a short read due to an object boundary */
osd_req_op_extent_osd_data_pages(req, 0,
pages, *plen, page_align, false, false);
dout("readpages final extent is %llu~%llu (%llu bytes align %d)\n",
off, *plen, *plen, page_align);
ceph_osdc_build_request(req, off, NULL, vino.snap, NULL);
rc = ceph_osdc_start_request(osdc, req, false);
if (!rc)
rc = ceph_osdc_wait_request(osdc, req);
ceph_osdc_put_request(req);
dout("readpages result %d\n", rc);
return rc;
}
EXPORT_SYMBOL(ceph_osdc_readpages);
/*
* do a synchronous write on N pages
*/
int ceph_osdc_writepages(struct ceph_osd_client *osdc, struct ceph_vino vino,
struct ceph_file_layout *layout,
struct ceph_snap_context *snapc,
u64 off, u64 len,
u32 truncate_seq, u64 truncate_size,
struct timespec *mtime,
struct page **pages, int num_pages)
{
struct ceph_osd_request *req;
int rc = 0;
int page_align = off & ~PAGE_MASK;
BUG_ON(vino.snap != CEPH_NOSNAP); /* snapshots aren't writeable */
req = ceph_osdc_new_request(osdc, layout, vino, off, &len, 1,
CEPH_OSD_OP_WRITE,
CEPH_OSD_FLAG_ONDISK | CEPH_OSD_FLAG_WRITE,
snapc, truncate_seq, truncate_size,
true);
if (IS_ERR(req))
return PTR_ERR(req);
/* it may be a short write due to an object boundary */
osd_req_op_extent_osd_data_pages(req, 0, pages, len, page_align,
false, false);
dout("writepages %llu~%llu (%llu bytes)\n", off, len, len);
ceph_osdc_build_request(req, off, snapc, CEPH_NOSNAP, mtime);
rc = ceph_osdc_start_request(osdc, req, true);
if (!rc)
rc = ceph_osdc_wait_request(osdc, req);
ceph_osdc_put_request(req);
if (rc == 0)
rc = len;
dout("writepages result %d\n", rc);
return rc;
}
EXPORT_SYMBOL(ceph_osdc_writepages);
int ceph_osdc_setup(void)
{
BUG_ON(ceph_osd_request_cache);
ceph_osd_request_cache = kmem_cache_create("ceph_osd_request",
sizeof (struct ceph_osd_request),
__alignof__(struct ceph_osd_request),
0, NULL);
return ceph_osd_request_cache ? 0 : -ENOMEM;
}
EXPORT_SYMBOL(ceph_osdc_setup);
void ceph_osdc_cleanup(void)
{
BUG_ON(!ceph_osd_request_cache);
kmem_cache_destroy(ceph_osd_request_cache);
ceph_osd_request_cache = NULL;
}
EXPORT_SYMBOL(ceph_osdc_cleanup);
/*
* handle incoming message
*/
static void dispatch(struct ceph_connection *con, struct ceph_msg *msg)
{
struct ceph_osd *osd = con->private;
struct ceph_osd_client *osdc;
int type = le16_to_cpu(msg->hdr.type);
if (!osd)
goto out;
osdc = osd->o_osdc;
switch (type) {
case CEPH_MSG_OSD_MAP:
ceph_osdc_handle_map(osdc, msg);
break;
case CEPH_MSG_OSD_OPREPLY:
handle_reply(osdc, msg, con);
break;
case CEPH_MSG_WATCH_NOTIFY:
handle_watch_notify(osdc, msg);
break;
default:
pr_err("received unknown message type %d %s\n", type,
ceph_msg_type_name(type));
}
out:
ceph_msg_put(msg);
}
/*
* lookup and return message for incoming reply. set up reply message
* pages.
*/
static struct ceph_msg *get_reply(struct ceph_connection *con,
struct ceph_msg_header *hdr,
int *skip)
{
struct ceph_osd *osd = con->private;
struct ceph_osd_client *osdc = osd->o_osdc;
struct ceph_msg *m;
struct ceph_osd_request *req;
int front = le32_to_cpu(hdr->front_len);
int data_len = le32_to_cpu(hdr->data_len);
u64 tid;
tid = le64_to_cpu(hdr->tid);
mutex_lock(&osdc->request_mutex);
req = __lookup_request(osdc, tid);
if (!req) {
*skip = 1;
m = NULL;
dout("get_reply unknown tid %llu from osd%d\n", tid,
osd->o_osd);
goto out;
}
libceph: drop ceph_osd_request->r_con_filling_msg A field in an osd request keeps track of whether a connection is currently filling the request's reply message. This patch gets rid of that field. An osd request includes two messages--a request and a reply--and they're both associated with the connection that existed to its the target osd at the time the request was created. An osd request can be dropped early, even when it's in flight. And at that time both messages are released. It's possible the reply message has been supplied to its connection to receive an incoming response message at the time the osd request gets dropped. So ceph_osdc_release_request() revokes that message from the connection before releasing it so things get cleaned up properly. Previously this may have caused a problem, because the connection that a message was associated with might have gone away before the revoke request. And to avoid any problems using that connection, the osd client held a reference to it when it supplies its response message. However since this commit: 38941f80 libceph: have messages point to their connection all messages hold a reference to the connection they are associated with whenever the connection is actively operating on the message (i.e. while the message is queued to send or sending, and when it data is being received into it). And if a message has no connection associated with it, ceph_msg_revoke_incoming() won't do anything when asked to revoke it. As a result, there is no need to keep an additional reference to the connection associated with a message when we hand the message to the messenger when it calls our alloc_msg() method to receive something. If the connection *were* operating on it, it would have its own reference, and if not, there's no work to be done when we need to revoke it. So get rid of the osd request's r_con_filling_msg field. This resolves: http://tracker.ceph.com/issues/4647 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-01 21:12:14 +00:00
if (req->r_reply->con)
dout("%s revoking msg %p from old con %p\n", __func__,
libceph: drop ceph_osd_request->r_con_filling_msg A field in an osd request keeps track of whether a connection is currently filling the request's reply message. This patch gets rid of that field. An osd request includes two messages--a request and a reply--and they're both associated with the connection that existed to its the target osd at the time the request was created. An osd request can be dropped early, even when it's in flight. And at that time both messages are released. It's possible the reply message has been supplied to its connection to receive an incoming response message at the time the osd request gets dropped. So ceph_osdc_release_request() revokes that message from the connection before releasing it so things get cleaned up properly. Previously this may have caused a problem, because the connection that a message was associated with might have gone away before the revoke request. And to avoid any problems using that connection, the osd client held a reference to it when it supplies its response message. However since this commit: 38941f80 libceph: have messages point to their connection all messages hold a reference to the connection they are associated with whenever the connection is actively operating on the message (i.e. while the message is queued to send or sending, and when it data is being received into it). And if a message has no connection associated with it, ceph_msg_revoke_incoming() won't do anything when asked to revoke it. As a result, there is no need to keep an additional reference to the connection associated with a message when we hand the message to the messenger when it calls our alloc_msg() method to receive something. If the connection *were* operating on it, it would have its own reference, and if not, there's no work to be done when we need to revoke it. So get rid of the osd request's r_con_filling_msg field. This resolves: http://tracker.ceph.com/issues/4647 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-01 21:12:14 +00:00
req->r_reply, req->r_reply->con);
ceph_msg_revoke_incoming(req->r_reply);
if (front > req->r_reply->front.iov_len) {
pr_warning("get_reply front %d > preallocated %d (%u#%llu)\n",
front, (int)req->r_reply->front.iov_len,
(unsigned int)con->peer_name.type,
le64_to_cpu(con->peer_name.num));
m = ceph_msg_new(CEPH_MSG_OSD_OPREPLY, front, GFP_NOFS, false);
if (!m)
goto out;
ceph_msg_put(req->r_reply);
req->r_reply = m;
}
m = ceph_msg_get(req->r_reply);
if (data_len > 0) {
struct ceph_osd_data *osd_data;
/*
* XXX This is assuming there is only one op containing
* XXX page data. Probably OK for reads, but this
* XXX ought to be done more generally.
*/
osd_data = osd_req_op_extent_osd_data(req, 0);
if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGES) {
if (osd_data->pages &&
unlikely(osd_data->length < data_len)) {
pr_warning("tid %lld reply has %d bytes "
"we had only %llu bytes ready\n",
tid, data_len, osd_data->length);
*skip = 1;
ceph_msg_put(m);
m = NULL;
goto out;
}
}
}
*skip = 0;
dout("get_reply tid %lld %p\n", tid, m);
out:
mutex_unlock(&osdc->request_mutex);
return m;
}
static struct ceph_msg *alloc_msg(struct ceph_connection *con,
struct ceph_msg_header *hdr,
int *skip)
{
struct ceph_osd *osd = con->private;
int type = le16_to_cpu(hdr->type);
int front = le32_to_cpu(hdr->front_len);
*skip = 0;
switch (type) {
case CEPH_MSG_OSD_MAP:
case CEPH_MSG_WATCH_NOTIFY:
return ceph_msg_new(type, front, GFP_NOFS, false);
case CEPH_MSG_OSD_OPREPLY:
return get_reply(con, hdr, skip);
default:
pr_info("alloc_msg unexpected msg type %d from osd%d\n", type,
osd->o_osd);
*skip = 1;
return NULL;
}
}
/*
* Wrappers to refcount containing ceph_osd struct
*/
static struct ceph_connection *get_osd_con(struct ceph_connection *con)
{
struct ceph_osd *osd = con->private;
if (get_osd(osd))
return con;
return NULL;
}
static void put_osd_con(struct ceph_connection *con)
{
struct ceph_osd *osd = con->private;
put_osd(osd);
}
/*
* authentication
*/
/*
* Note: returned pointer is the address of a structure that's
* managed separately. Caller must *not* attempt to free it.
*/
static struct ceph_auth_handshake *get_authorizer(struct ceph_connection *con,
int *proto, int force_new)
{
struct ceph_osd *o = con->private;
struct ceph_osd_client *osdc = o->o_osdc;
struct ceph_auth_client *ac = osdc->client->monc.auth;
struct ceph_auth_handshake *auth = &o->o_auth;
if (force_new && auth->authorizer) {
ceph_auth_destroy_authorizer(ac, auth->authorizer);
auth->authorizer = NULL;
}
if (!auth->authorizer) {
int ret = ceph_auth_create_authorizer(ac, CEPH_ENTITY_TYPE_OSD,
auth);
if (ret)
return ERR_PTR(ret);
} else {
int ret = ceph_auth_update_authorizer(ac, CEPH_ENTITY_TYPE_OSD,
auth);
if (ret)
return ERR_PTR(ret);
}
*proto = ac->protocol;
return auth;
}
static int verify_authorizer_reply(struct ceph_connection *con, int len)
{
struct ceph_osd *o = con->private;
struct ceph_osd_client *osdc = o->o_osdc;
struct ceph_auth_client *ac = osdc->client->monc.auth;
return ceph_auth_verify_authorizer_reply(ac, o->o_auth.authorizer, len);
}
static int invalidate_authorizer(struct ceph_connection *con)
{
struct ceph_osd *o = con->private;
struct ceph_osd_client *osdc = o->o_osdc;
struct ceph_auth_client *ac = osdc->client->monc.auth;
ceph_auth_invalidate_authorizer(ac, CEPH_ENTITY_TYPE_OSD);
return ceph_monc_validate_auth(&osdc->client->monc);
}
static const struct ceph_connection_operations osd_con_ops = {
.get = get_osd_con,
.put = put_osd_con,
.dispatch = dispatch,
.get_authorizer = get_authorizer,
.verify_authorizer_reply = verify_authorizer_reply,
.invalidate_authorizer = invalidate_authorizer,
.alloc_msg = alloc_msg,
.fault = osd_reset,
};