2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
|
|
|
|
*
|
|
|
|
* Maintained by: Jeremy Higdon @ SGI
|
|
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
|
|
* on emails.
|
|
|
|
*
|
|
|
|
* Copyright 2004 SGI
|
|
|
|
*
|
|
|
|
* Bits from Jeff Garzik, Copyright RedHat, Inc.
|
|
|
|
*
|
2005-08-29 00:18:39 +00:00
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
|
|
* any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; see the file COPYING. If not, write to
|
|
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
|
|
* as Documentation/DocBook/libata.*
|
|
|
|
*
|
|
|
|
* Vitesse hardware documentation presumably available under NDA.
|
|
|
|
* Intel 31244 (same hardware interface) documentation presumably
|
|
|
|
* available from http://developer.intel.com/
|
|
|
|
*
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/interrupt.h>
|
2005-04-08 07:53:09 +00:00
|
|
|
#include <linux/dma-mapping.h>
|
2005-10-30 19:39:11 +00:00
|
|
|
#include <linux/device.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <linux/libata.h>
|
|
|
|
|
|
|
|
#define DRV_NAME "sata_vsc"
|
2007-08-31 08:54:06 +00:00
|
|
|
#define DRV_VERSION "2.3"
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-03-22 03:14:17 +00:00
|
|
|
enum {
|
2007-02-01 06:06:36 +00:00
|
|
|
VSC_MMIO_BAR = 0,
|
|
|
|
|
2006-03-22 03:14:17 +00:00
|
|
|
/* Interrupt register offsets (from chip base address) */
|
|
|
|
VSC_SATA_INT_STAT_OFFSET = 0x00,
|
|
|
|
VSC_SATA_INT_MASK_OFFSET = 0x04,
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-03-22 03:14:17 +00:00
|
|
|
/* Taskfile registers offsets */
|
|
|
|
VSC_SATA_TF_CMD_OFFSET = 0x00,
|
|
|
|
VSC_SATA_TF_DATA_OFFSET = 0x00,
|
|
|
|
VSC_SATA_TF_ERROR_OFFSET = 0x04,
|
|
|
|
VSC_SATA_TF_FEATURE_OFFSET = 0x06,
|
|
|
|
VSC_SATA_TF_NSECT_OFFSET = 0x08,
|
|
|
|
VSC_SATA_TF_LBAL_OFFSET = 0x0c,
|
|
|
|
VSC_SATA_TF_LBAM_OFFSET = 0x10,
|
|
|
|
VSC_SATA_TF_LBAH_OFFSET = 0x14,
|
|
|
|
VSC_SATA_TF_DEVICE_OFFSET = 0x18,
|
|
|
|
VSC_SATA_TF_STATUS_OFFSET = 0x1c,
|
|
|
|
VSC_SATA_TF_COMMAND_OFFSET = 0x1d,
|
|
|
|
VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28,
|
|
|
|
VSC_SATA_TF_CTL_OFFSET = 0x29,
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-03-22 03:14:17 +00:00
|
|
|
/* DMA base */
|
|
|
|
VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64,
|
|
|
|
VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C,
|
|
|
|
VSC_SATA_DMA_CMD_OFFSET = 0x70,
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-03-22 03:14:17 +00:00
|
|
|
/* SCRs base */
|
|
|
|
VSC_SATA_SCR_STATUS_OFFSET = 0x100,
|
|
|
|
VSC_SATA_SCR_ERROR_OFFSET = 0x104,
|
|
|
|
VSC_SATA_SCR_CONTROL_OFFSET = 0x108,
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-03-22 03:14:17 +00:00
|
|
|
/* Port stride */
|
|
|
|
VSC_SATA_PORT_OFFSET = 0x200,
|
|
|
|
|
|
|
|
/* Error interrupt status bit offsets */
|
|
|
|
VSC_SATA_INT_ERROR_CRC = 0x40,
|
|
|
|
VSC_SATA_INT_ERROR_T = 0x20,
|
|
|
|
VSC_SATA_INT_ERROR_P = 0x10,
|
|
|
|
VSC_SATA_INT_ERROR_R = 0x8,
|
|
|
|
VSC_SATA_INT_ERROR_E = 0x4,
|
|
|
|
VSC_SATA_INT_ERROR_M = 0x2,
|
|
|
|
VSC_SATA_INT_PHY_CHANGE = 0x1,
|
|
|
|
VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \
|
|
|
|
VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \
|
|
|
|
VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \
|
|
|
|
VSC_SATA_INT_PHY_CHANGE),
|
2007-01-09 10:59:21 +00:00
|
|
|
};
|
2006-03-22 03:07:13 +00:00
|
|
|
|
2008-07-31 08:02:40 +00:00
|
|
|
static int vsc_sata_scr_read(struct ata_link *link,
|
|
|
|
unsigned int sc_reg, u32 *val)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
if (sc_reg > SCR_CONTROL)
|
2007-07-16 05:29:40 +00:00
|
|
|
return -EINVAL;
|
2008-07-31 08:02:40 +00:00
|
|
|
*val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4));
|
2007-07-16 05:29:40 +00:00
|
|
|
return 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
2008-07-31 08:02:40 +00:00
|
|
|
static int vsc_sata_scr_write(struct ata_link *link,
|
|
|
|
unsigned int sc_reg, u32 val)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
if (sc_reg > SCR_CONTROL)
|
2007-07-16 05:29:40 +00:00
|
|
|
return -EINVAL;
|
2008-07-31 08:02:40 +00:00
|
|
|
writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
|
2007-07-16 05:29:40 +00:00
|
|
|
return 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
2007-02-23 23:36:43 +00:00
|
|
|
static void vsc_freeze(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
void __iomem *mask_addr;
|
|
|
|
|
|
|
|
mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
|
|
|
|
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
|
|
|
|
|
|
|
|
writeb(0, mask_addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void vsc_thaw(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
void __iomem *mask_addr;
|
|
|
|
|
|
|
|
mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
|
|
|
|
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
|
|
|
|
|
|
|
|
writeb(0xff, mask_addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
|
|
|
|
{
|
2005-10-21 05:46:02 +00:00
|
|
|
void __iomem *mask_addr;
|
2005-04-16 22:20:36 +00:00
|
|
|
u8 mask;
|
|
|
|
|
2007-02-01 06:06:36 +00:00
|
|
|
mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
|
2005-04-16 22:20:36 +00:00
|
|
|
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
|
|
|
|
mask = readb(mask_addr);
|
|
|
|
if (ctl & ATA_NIEN)
|
|
|
|
mask |= 0x80;
|
|
|
|
else
|
|
|
|
mask &= 0x7F;
|
|
|
|
writeb(mask, mask_addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2005-10-22 18:27:05 +00:00
|
|
|
static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The only thing the ctl register is used for is SRST.
|
|
|
|
* That is not enabled or disabled via tf_load.
|
2007-10-26 04:03:37 +00:00
|
|
|
* However, if ATA_NIEN is changed, then we need to change
|
|
|
|
* the interrupt register.
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
|
|
|
if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
|
|
|
|
ap->last_ctl = tf->ctl;
|
|
|
|
vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
|
|
|
|
}
|
|
|
|
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
|
2006-12-20 19:37:04 +00:00
|
|
|
writew(tf->feature | (((u16)tf->hob_feature) << 8),
|
2007-02-01 06:06:36 +00:00
|
|
|
ioaddr->feature_addr);
|
2006-12-20 19:37:04 +00:00
|
|
|
writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
|
2007-02-01 06:06:36 +00:00
|
|
|
ioaddr->nsect_addr);
|
2006-12-20 19:37:04 +00:00
|
|
|
writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
|
2007-02-01 06:06:36 +00:00
|
|
|
ioaddr->lbal_addr);
|
2006-12-20 19:37:04 +00:00
|
|
|
writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
|
2007-02-01 06:06:36 +00:00
|
|
|
ioaddr->lbam_addr);
|
2006-12-20 19:37:04 +00:00
|
|
|
writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
|
2007-02-01 06:06:36 +00:00
|
|
|
ioaddr->lbah_addr);
|
2005-04-16 22:20:36 +00:00
|
|
|
} else if (is_addr) {
|
2007-02-01 06:06:36 +00:00
|
|
|
writew(tf->feature, ioaddr->feature_addr);
|
|
|
|
writew(tf->nsect, ioaddr->nsect_addr);
|
|
|
|
writew(tf->lbal, ioaddr->lbal_addr);
|
|
|
|
writew(tf->lbam, ioaddr->lbam_addr);
|
|
|
|
writew(tf->lbah, ioaddr->lbah_addr);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (tf->flags & ATA_TFLAG_DEVICE)
|
2007-02-01 06:06:36 +00:00
|
|
|
writeb(tf->device, ioaddr->device_addr);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
ata_wait_idle(ap);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
|
|
{
|
|
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
2005-10-29 17:58:21 +00:00
|
|
|
u16 nsect, lbal, lbam, lbah, feature;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-04-07 13:47:16 +00:00
|
|
|
tf->command = ata_sff_check_status(ap);
|
2007-02-01 06:06:36 +00:00
|
|
|
tf->device = readw(ioaddr->device_addr);
|
|
|
|
feature = readw(ioaddr->error_addr);
|
|
|
|
nsect = readw(ioaddr->nsect_addr);
|
|
|
|
lbal = readw(ioaddr->lbal_addr);
|
|
|
|
lbam = readw(ioaddr->lbam_addr);
|
|
|
|
lbah = readw(ioaddr->lbah_addr);
|
2005-10-29 17:58:21 +00:00
|
|
|
|
|
|
|
tf->feature = feature;
|
|
|
|
tf->nsect = nsect;
|
|
|
|
tf->lbal = lbal;
|
|
|
|
tf->lbam = lbam;
|
|
|
|
tf->lbah = lbah;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
2005-10-29 17:58:21 +00:00
|
|
|
tf->hob_feature = feature >> 8;
|
2005-04-16 22:20:36 +00:00
|
|
|
tf->hob_nsect = nsect >> 8;
|
|
|
|
tf->hob_lbal = lbal >> 8;
|
|
|
|
tf->hob_lbam = lbam >> 8;
|
|
|
|
tf->hob_lbah = lbah >> 8;
|
2007-10-26 04:03:37 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2007-02-23 23:36:43 +00:00
|
|
|
static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
|
|
|
|
{
|
|
|
|
if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
|
|
|
|
ata_port_freeze(ap);
|
|
|
|
else
|
|
|
|
ata_port_abort(ap);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void vsc_port_intr(u8 port_status, struct ata_port *ap)
|
|
|
|
{
|
|
|
|
struct ata_queued_cmd *qc;
|
|
|
|
int handled = 0;
|
|
|
|
|
|
|
|
if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
|
|
|
|
vsc_error_intr(port_status, ap);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2007-08-06 09:36:22 +00:00
|
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
2007-02-23 23:36:43 +00:00
|
|
|
if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
|
2010-05-19 20:10:21 +00:00
|
|
|
handled = ata_bmdma_port_intr(ap, qc);
|
2007-02-23 23:36:43 +00:00
|
|
|
|
|
|
|
/* We received an interrupt during a polled command,
|
|
|
|
* or some other spurious condition. Interrupt reporting
|
|
|
|
* with this hardware is fairly reliable so it is safe to
|
|
|
|
* simply clear the interrupt
|
|
|
|
*/
|
|
|
|
if (unlikely(!handled))
|
2008-04-07 13:47:16 +00:00
|
|
|
ap->ops->sff_check_status(ap);
|
2007-02-23 23:36:43 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* vsc_sata_interrupt
|
|
|
|
*
|
2007-10-26 04:03:37 +00:00
|
|
|
* Read the interrupt register and process for the devices that have
|
|
|
|
* them pending.
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
2007-10-26 04:03:37 +00:00
|
|
|
static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2006-08-24 07:19:22 +00:00
|
|
|
struct ata_host *host = dev_instance;
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int i;
|
|
|
|
unsigned int handled = 0;
|
2007-02-23 23:36:43 +00:00
|
|
|
u32 status;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-02-23 23:36:43 +00:00
|
|
|
status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-02-23 23:36:43 +00:00
|
|
|
if (unlikely(status == 0xffffffff || status == 0)) {
|
|
|
|
if (status)
|
|
|
|
dev_printk(KERN_ERR, host->dev,
|
|
|
|
": IRQ status == 0xffffffff, "
|
|
|
|
"PCI fault or device removal?\n");
|
|
|
|
goto out;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-02-23 23:36:43 +00:00
|
|
|
spin_lock(&host->lock);
|
2005-12-14 20:10:49 +00:00
|
|
|
|
2007-02-23 23:36:43 +00:00
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
|
|
u8 port_status = (status >> (8 * i)) & 0xff;
|
|
|
|
if (port_status) {
|
2010-05-10 19:41:30 +00:00
|
|
|
vsc_port_intr(port_status, host->ports[i]);
|
|
|
|
handled++;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2006-08-24 07:19:22 +00:00
|
|
|
spin_unlock(&host->lock);
|
2007-02-23 23:36:43 +00:00
|
|
|
out:
|
2005-04-16 22:20:36 +00:00
|
|
|
return IRQ_RETVAL(handled);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2005-11-07 05:59:37 +00:00
|
|
|
static struct scsi_host_template vsc_sata_sht = {
|
2008-03-25 03:22:49 +00:00
|
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
libata: implement and use ops inheritance
libata lets low level drivers build ata_port_operations table and
register it with libata core layer. This allows low level drivers
high level of flexibility but also burdens them with lots of
boilerplate entries.
This becomes worse for drivers which support related similar
controllers which differ slightly. They share most of the operations
except for a few. However, the driver still needs to list all
operations for each variant. This results in large number of
duplicate entries, which is not only inefficient but also error-prone
as it becomes very difficult to tell what the actual differences are.
This duplicate boilerplates all over the low level drivers also make
updating the core layer exteremely difficult and error-prone. When
compounded with multi-branched development model, it ends up
accumulating inconsistencies over time. Some of those inconsistencies
cause immediate problems and fixed. Others just remain there dormant
making maintenance increasingly difficult.
To rectify the problem, this patch implements ata_port_operations
inheritance. To allow LLDs to easily re-use their own ops tables
overriding only specific methods, this patch implements poor man's
class inheritance. An ops table has ->inherits field which can be set
to any ops table as long as it doesn't create a loop. When the host
is started, the inheritance chain is followed and any operation which
isn't specified is taken from the nearest ancestor which has it
specified. This operation is called finalization and done only once
per an ops table and the LLD doesn't have to do anything special about
it other than making the ops table non-const such that libata can
update it.
libata provides four base ops tables lower drivers can inherit from -
base, sata, pmp, sff and bmdma. To avoid overriding these ops
accidentaly, these ops are declared const and LLDs should always
inherit these instead of using them directly.
After finalization, all the ops table are identical before and after
the patch except for setting .irq_handler to ata_interrupt in drivers
which didn't use to. The .irq_handler doesn't have any actual effect
and the field will soon be removed by later patch.
* sata_sx4 is still using old style EH and currently doesn't take
advantage of ops inheritance.
Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 03:22:49 +00:00
|
|
|
static struct ata_port_operations vsc_sata_ops = {
|
|
|
|
.inherits = &ata_bmdma_port_ops,
|
2009-03-24 10:23:46 +00:00
|
|
|
/* The IRQ handling is not quite standard SFF behaviour so we
|
|
|
|
cannot use the default lost interrupt handler */
|
|
|
|
.lost_interrupt = ATA_OP_NULL,
|
2008-04-07 13:47:16 +00:00
|
|
|
.sff_tf_load = vsc_sata_tf_load,
|
|
|
|
.sff_tf_read = vsc_sata_tf_read,
|
2007-02-23 23:36:43 +00:00
|
|
|
.freeze = vsc_freeze,
|
|
|
|
.thaw = vsc_thaw,
|
2005-04-16 22:20:36 +00:00
|
|
|
.scr_read = vsc_sata_scr_read,
|
|
|
|
.scr_write = vsc_sata_scr_write,
|
|
|
|
};
|
|
|
|
|
2007-02-01 06:06:36 +00:00
|
|
|
static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
|
|
|
|
void __iomem *base)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET;
|
|
|
|
port->data_addr = base + VSC_SATA_TF_DATA_OFFSET;
|
|
|
|
port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET;
|
|
|
|
port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET;
|
|
|
|
port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET;
|
|
|
|
port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET;
|
|
|
|
port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET;
|
|
|
|
port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET;
|
|
|
|
port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET;
|
|
|
|
port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET;
|
|
|
|
port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET;
|
|
|
|
port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
|
|
|
|
port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET;
|
|
|
|
port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET;
|
|
|
|
port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET;
|
2007-02-01 06:06:36 +00:00
|
|
|
writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
|
|
|
|
writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
|
|
|
|
const struct pci_device_id *ent)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static const struct ata_port_info pi = {
|
|
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
|
|
ATA_FLAG_MMIO,
|
2009-03-14 20:38:24 +00:00
|
|
|
.pio_mask = ATA_PIO4,
|
|
|
|
.mwdma_mask = ATA_MWDMA2,
|
2007-07-09 16:16:50 +00:00
|
|
|
.udma_mask = ATA_UDMA6,
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
.port_ops = &vsc_sata_ops,
|
|
|
|
};
|
|
|
|
const struct ata_port_info *ppi[] = { &pi, NULL };
|
2005-04-16 22:20:36 +00:00
|
|
|
static int printed_version;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
struct ata_host *host;
|
2005-10-21 05:46:02 +00:00
|
|
|
void __iomem *mmio_base;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
int i, rc;
|
2007-02-15 23:13:46 +00:00
|
|
|
u8 cls;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (!printed_version++)
|
2005-10-30 19:39:11 +00:00
|
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
/* allocate host */
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
|
|
|
|
if (!host)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2007-01-20 07:00:28 +00:00
|
|
|
rc = pcim_enable_device(pdev);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
/* check if we have needed resource mapped */
|
2007-01-20 07:00:28 +00:00
|
|
|
if (pci_resource_len(pdev, 0) == 0)
|
|
|
|
return -ENODEV;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
/* map IO regions and intialize host accordingly */
|
2007-02-01 06:06:36 +00:00
|
|
|
rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
|
|
|
|
if (rc == -EBUSY)
|
2007-01-20 07:00:28 +00:00
|
|
|
pcim_pin_device(pdev);
|
2007-02-01 06:06:36 +00:00
|
|
|
if (rc)
|
2007-01-20 07:00:28 +00:00
|
|
|
return rc;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
|
|
|
|
mmio_base = host->iomap[VSC_MMIO_BAR];
|
|
|
|
|
2007-08-18 04:14:55 +00:00
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
|
|
|
|
|
|
|
|
vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
|
|
|
|
|
|
|
|
ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
|
|
|
|
ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Use 32 bit DMA mask, because 64 bit address support is poor.
|
|
|
|
*/
|
2009-04-07 02:01:15 +00:00
|
|
|
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
2005-04-16 22:20:36 +00:00
|
|
|
if (rc)
|
2007-01-20 07:00:28 +00:00
|
|
|
return rc;
|
2009-04-07 02:01:15 +00:00
|
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
2005-04-16 22:20:36 +00:00
|
|
|
if (rc)
|
2007-01-20 07:00:28 +00:00
|
|
|
return rc;
|
2007-01-09 10:59:21 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
2007-02-15 23:13:46 +00:00
|
|
|
* Due to a bug in the chip, the default cache line size can't be
|
|
|
|
* used (unless the default is non-zero).
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
2007-02-15 23:13:46 +00:00
|
|
|
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
|
|
|
|
if (cls == 0x00)
|
|
|
|
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-01-20 07:00:28 +00:00
|
|
|
if (pci_enable_msi(pdev) == 0)
|
2007-01-09 10:59:21 +00:00
|
|
|
pci_intx(pdev, 0);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
/*
|
2005-04-16 22:20:36 +00:00
|
|
|
* Config offset 0x98 is "Extended Control and Status Register 0"
|
|
|
|
* Default value is (1 << 28). All bits except bit 28 are reserved in
|
|
|
|
* DPA mode. If bit 28 is set, LED 0 reflects all ports' activity.
|
|
|
|
* If bit 28 is clear, each port has its own LED.
|
|
|
|
*/
|
|
|
|
pci_write_config_dword(pdev, 0x98, 0);
|
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
pci_set_master(pdev);
|
|
|
|
return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
|
|
|
|
IRQF_SHARED, &vsc_sata_sht);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2005-11-10 16:04:11 +00:00
|
|
|
static const struct pci_device_id vsc_sata_pci_tbl[] = {
|
2006-06-27 00:52:17 +00:00
|
|
|
{ PCI_VENDOR_ID_VITESSE, 0x7174,
|
2006-05-10 08:49:14 +00:00
|
|
|
PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
|
2006-06-27 00:52:17 +00:00
|
|
|
{ PCI_VENDOR_ID_INTEL, 0x3200,
|
2006-05-10 08:49:14 +00:00
|
|
|
PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
|
2006-09-29 00:21:59 +00:00
|
|
|
|
2006-06-27 00:52:17 +00:00
|
|
|
{ } /* terminate list */
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct pci_driver vsc_sata_pci_driver = {
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.id_table = vsc_sata_pci_tbl,
|
|
|
|
.probe = vsc_sata_init_one,
|
|
|
|
.remove = ata_pci_remove_one,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init vsc_sata_init(void)
|
|
|
|
{
|
2006-08-10 09:13:18 +00:00
|
|
|
return pci_register_driver(&vsc_sata_pci_driver);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit vsc_sata_exit(void)
|
|
|
|
{
|
|
|
|
pci_unregister_driver(&vsc_sata_pci_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Jeremy Higdon");
|
|
|
|
MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
|
|
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
|
|
|
|
module_init(vsc_sata_init);
|
|
|
|
module_exit(vsc_sata_exit);
|