Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-18 00:53:40 +00:00
Code Issues Packages Projects Releases Wiki Activity
36ecbcab84
linux/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt

38 lines
1.2 KiB
Plaintext
Raw Normal View History

serial: tegra: add serial driver NVIDIA's Tegra has multiple UART controller which supports: - APB DMA based controller fifo read/write. - End Of Data interrupt in incoming data to know whether end of frame achieve or not. - HW controlled RTS and CTS flow control to reduce SW overhead. Add serial driver to use all above feature. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08 10:57:44 +00:00
NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver.
Required properties:
- compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
- reg: Should contain UART controller registers location and length.
- interrupts: Should contain UART controller interrupts.
ARM: tegra: add missing clock documentation to DT bindings Many of the Tegra DT binding documents say nothing about the clocks or clock-names properties, yet those are present and required in DT files. This patch simply updates the documentation file to match the implicit definition of the binding, based on real-world DT content. All Tegra bindings that mention clocks are updated to have consistent wording and formatting of the clock-related properties. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-11-06 21:00:25 +00:00
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
ARM: tegra: document reset properties in DT bindings Update all the Tegra DT bindings to require resets/reset-names properties where the HW module has reset inputs. Remove any entries from clocks or clock-names that were only required to identify reset inputs, rather than referring to real clocks. This is a DT-ABI-incompatible change. It is the first of two changes required for me to consider the Tegra DT bindings as stable, the other being conversion to the common DMA DT bindings. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-11-07 17:11:27 +00:00
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- serial
ARM: tegra: document use of standard DMA DT bindings Update all the Tegra DT bindings to require the standard dmas/dma-names properties rather than non-standard nvidia,dma-request-selector property. This is a DT-ABI-incompatible change. It is the second of two changes required for me to consider the Tegra DT bindings as stable, the other being the previous conversion to the common reset bindings. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-11 20:04:19 +00:00
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
serial: tegra: add serial driver NVIDIA's Tegra has multiple UART controller which supports: - APB DMA based controller fifo read/write. - End Of Data interrupt in incoming data to know whether end of frame achieve or not. - HW controlled RTS and CTS flow control to reduce SW overhead. Add serial driver to use all above feature. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08 10:57:44 +00:00
Optional properties:
- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
only if all 8 lines of UART controller are pinmuxed.
Example:
serial@70006000 {
compatible = "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
nvidia,enable-modem-interrupt;
ARM: tegra: add missing clock documentation to DT bindings Many of the Tegra DT binding documents say nothing about the clocks or clock-names properties, yet those are present and required in DT files. This patch simply updates the documentation file to match the implicit definition of the binding, based on real-world DT content. All Tegra bindings that mention clocks are updated to have consistent wording and formatting of the clock-related properties. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-11-06 21:00:25 +00:00
clocks = <&tegra_car 6>;
ARM: tegra: document reset properties in DT bindings Update all the Tegra DT bindings to require resets/reset-names properties where the HW module has reset inputs. Remove any entries from clocks or clock-names that were only required to identify reset inputs, rather than referring to real clocks. This is a DT-ABI-incompatible change. It is the first of two changes required for me to consider the Tegra DT bindings as stable, the other being conversion to the common DMA DT bindings. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-11-07 17:11:27 +00:00
resets = <&tegra_car 6>;
reset-names = "serial";
ARM: tegra: document use of standard DMA DT bindings Update all the Tegra DT bindings to require the standard dmas/dma-names properties rather than non-standard nvidia,dma-request-selector property. This is a DT-ABI-incompatible change. It is the second of two changes required for me to consider the Tegra DT bindings as stable, the other being the previous conversion to the common reset bindings. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-11 20:04:19 +00:00
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
serial: tegra: add serial driver NVIDIA's Tegra has multiple UART controller which supports: - APB DMA based controller fifo read/write. - End Of Data interrupt in incoming data to know whether end of frame achieve or not. - HW controlled RTS and CTS flow control to reduce SW overhead. Add serial driver to use all above feature. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08 10:57:44 +00:00
status = "disabled";
};
Reference in New Issue Copy Permalink